Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig ARCH_OMAP1
3 bool "TI OMAP1"
4 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
5 depends on CPU_LITTLE_ENDIAN
6 depends on ATAGS
7 select ARCH_HAS_HOLES_MEMORYMODEL
8 select ARCH_OMAP
9 select CLKSRC_MMIO
10 select FORCE_PCI if PCCARD
11 select GPIOLIB
12 help
13 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
14
15if ARCH_OMAP1
16
17menu "TI OMAP1 specific features"
18
19comment "OMAP Core Type"
20
21config ARCH_OMAP15XX
22 depends on ARCH_MULTI_V4T
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_MULTI_V5
30 bool "OMAP16xx Based System"
31 select ARCH_OMAP_OTG
32 select CPU_ARM926T
33 select OMAP_DM_TIMER
34
35config ARCH_OMAP
36 bool
37
38comment "OMAP Feature Selections"
39
40config OMAP_MUX
41 bool "OMAP multiplexing support"
42 default y
43 help
44 Pin multiplexing support for OMAP boards. If your bootloader
45 sets the multiplexing correctly, say N. Otherwise, or if unsure,
46 say Y.
47
48config OMAP_MUX_DEBUG
49 bool "Multiplexing debug output"
50 depends on OMAP_MUX
51 help
52 Makes the multiplexing functions print out a lot of debug info.
53 This is useful if you want to find out the correct values of the
54 multiplexing registers.
55
56config OMAP_MUX_WARNINGS
57 bool "Warn about pins the bootloader didn't set up"
58 depends on OMAP_MUX
59 default y
60 help
61 Choose Y here to warn whenever driver initialization logic needs
62 to change the pin multiplexing setup. When there are no warnings
63 printed, it's safe to deselect OMAP_MUX for your product.
64
65config OMAP_32K_TIMER
66 bool "Use 32KHz timer"
67 depends on ARCH_OMAP16XX
68 default ARCH_OMAP16XX
69 help
70 Select this option if you want to enable the OMAP 32KHz timer.
71 This timer saves power compared to the OMAP_MPU_TIMER, and has
72 support for no tick during idle. The 32KHz timer provides less
73 intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
74 currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
75
76 On OMAP2PLUS this value is only used for CONFIG_HZ and
77 CLOCK_TICK_RATE compile time calculation.
78 The actual timer selection is done in the board file
79 through the (DT_)MACHINE_START structure.
80
81config OMAP_MPU_TIMER
82 bool "Use mpu timer"
83 depends on ARCH_OMAP1
84 help
85 Select this option if you want to use the OMAP mpu timer. This
86 timer provides more intra-tick resolution than the 32KHz timer,
87 but consumes more power.
88
89config OMAP_SERIAL_WAKE
90 bool "Enable wake-up events for serial ports"
91 depends on ARCH_OMAP1 && OMAP_MUX
92 default y
93 help
94 Select this option if you want to have your system wake up
95 to data on the serial RX line. This allows you to wake the
96 system from serial console.
97
98config OMAP_RESET_CLOCKS
99 bool "Reset unused clocks during boot"
100 depends on ARCH_OMAP
101 help
102 Say Y if you want to reset unused clocks during boot.
103 This option saves power, but assumes all drivers are
104 using the clock framework. Broken drivers that do not
105 yet use clock framework may not work with this option.
106 If you are booting from another operating system, you
107 probably do not want this option enabled until your
108 device drivers work properly.
109
110config ARCH_OMAP_OTG
111 bool
112
113comment "OMAP Board Type"
114
115config MACH_OMAP_OSK
116 bool "TI OSK Support"
117 depends on ARCH_OMAP16XX
118 help
119 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
120 if you have such a board.
121
122config MACH_OMAP_PALMTE
123 bool "Palm Tungsten E"
124 depends on ARCH_OMAP15XX
125 help
126 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
127 need a PalmOS compatible bootloader; check out
128 http://palmtelinux.sourceforge.net/ for more information.
129 Say Y here if you have this PDA model, say N otherwise.
130
131config MACH_SX1
132 bool "Siemens SX1"
133 depends on ARCH_OMAP15XX
134 select I2C
135 help
136 Support for the Siemens SX1 phone. To boot the kernel,
137 you'll need a SX1 compatible bootloader; check out
138 http://forum.oslik.ru and
139 https://www.handhelds.org/moin/moin.cgi/SiemensSX1
140 for more information.
141 Say Y here if you have such a phone, say NO otherwise.
142
143config MACH_NOKIA770
144 bool "Nokia 770"
145 depends on ARCH_OMAP16XX
146 help
147 Support for the Nokia 770 Internet Tablet. Say Y here if you
148 have such a device.
149
150config MACH_AMS_DELTA
151 bool "Amstrad E3 (Delta)"
152 depends on ARCH_OMAP15XX
153 select FIQ
154 select GPIO_GENERIC_PLATFORM
155 select LEDS_GPIO_REGISTER
156 select REGULATOR
157 select REGULATOR_FIXED_VOLTAGE
158 help
159 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
160 if you have such a device.
161
162endmenu
163
164endif
1# SPDX-License-Identifier: GPL-2.0-only
2if ARCH_OMAP1
3
4menu "TI OMAP1 specific features"
5
6comment "OMAP Core Type"
7
8config ARCH_OMAP730
9 bool "OMAP730 Based System"
10 select ARCH_OMAP_OTG
11 select CPU_ARM926T
12 select OMAP_MPU_TIMER
13
14config ARCH_OMAP850
15 bool "OMAP850 Based System"
16 select ARCH_OMAP_OTG
17 select CPU_ARM926T
18
19config ARCH_OMAP15XX
20 default y
21 bool "OMAP15xx Based System"
22 select CPU_ARM925T
23 select OMAP_MPU_TIMER
24
25config ARCH_OMAP16XX
26 bool "OMAP16xx Based System"
27 select ARCH_OMAP_OTG
28 select CPU_ARM926T
29 select OMAP_DM_TIMER
30
31config OMAP_MUX
32 bool "OMAP multiplexing support"
33 default y
34 help
35 Pin multiplexing support for OMAP boards. If your bootloader
36 sets the multiplexing correctly, say N. Otherwise, or if unsure,
37 say Y.
38
39config OMAP_MUX_DEBUG
40 bool "Multiplexing debug output"
41 depends on OMAP_MUX
42 help
43 Makes the multiplexing functions print out a lot of debug info.
44 This is useful if you want to find out the correct values of the
45 multiplexing registers.
46
47config OMAP_MUX_WARNINGS
48 bool "Warn about pins the bootloader didn't set up"
49 depends on OMAP_MUX
50 default y
51 help
52 Choose Y here to warn whenever driver initialization logic needs
53 to change the pin multiplexing setup. When there are no warnings
54 printed, it's safe to deselect OMAP_MUX for your product.
55
56comment "OMAP Board Type"
57
58config MACH_OMAP_INNOVATOR
59 bool "TI Innovator"
60 depends on ARCH_OMAP15XX || ARCH_OMAP16XX
61 help
62 TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
63 have such a board.
64
65config MACH_OMAP_H2
66 bool "TI H2 Support"
67 depends on ARCH_OMAP16XX
68 help
69 TI OMAP 1610/1611B H2 board support. Say Y here if you have such
70 a board.
71
72config MACH_OMAP_H3
73 bool "TI H3 Support"
74 depends on ARCH_OMAP16XX
75 help
76 TI OMAP 1710 H3 board support. Say Y here if you have such
77 a board.
78
79config MACH_HERALD
80 bool "HTC Herald"
81 depends on ARCH_OMAP850
82 help
83 HTC Herald smartphone support (AKA T-Mobile Wing, ...)
84
85config MACH_OMAP_OSK
86 bool "TI OSK Support"
87 depends on ARCH_OMAP16XX
88 help
89 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
90 if you have such a board.
91
92config OMAP_OSK_MISTRAL
93 bool "Mistral QVGA board Support"
94 depends on MACH_OMAP_OSK
95 help
96 The OSK supports an optional add-on board with a Quarter-VGA
97 touchscreen, PDA-ish buttons, a resume button, bicolor LED,
98 and camera connector. Say Y here if you have this board.
99
100config MACH_OMAP_PERSEUS2
101 bool "TI Perseus2"
102 depends on ARCH_OMAP730
103 help
104 Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
105 a board.
106
107config MACH_OMAP_FSAMPLE
108 bool "TI F-Sample"
109 depends on ARCH_OMAP730
110 help
111 Support for TI OMAP 850 F-Sample board. Say Y here if you have such
112 a board.
113
114config MACH_OMAP_PALMTE
115 bool "Palm Tungsten E"
116 depends on ARCH_OMAP15XX
117 help
118 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
119 need a PalmOS compatible bootloader; check out
120 http://palmtelinux.sourceforge.net/ for more information.
121 Say Y here if you have this PDA model, say N otherwise.
122
123config MACH_OMAP_PALMZ71
124 bool "Palm Zire71"
125 depends on ARCH_OMAP15XX
126 help
127 Support for the Palm Zire71 PDA. To boot the kernel,
128 you'll need a PalmOS compatible bootloader; check out
129 http://hackndev.com/palm/z71 for more information.
130 Say Y here if you have such a PDA, say N otherwise.
131
132config MACH_OMAP_PALMTT
133 bool "Palm Tungsten|T"
134 depends on ARCH_OMAP15XX
135 help
136 Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
137 need a PalmOS compatible bootloader (Garux); check out
138 http://garux.sourceforge.net/ for more information.
139 Say Y here if you have this PDA model, say N otherwise.
140
141config MACH_SX1
142 bool "Siemens SX1"
143 depends on ARCH_OMAP15XX
144 select I2C
145 help
146 Support for the Siemens SX1 phone. To boot the kernel,
147 you'll need a SX1 compatible bootloader; check out
148 http://forum.oslik.ru and
149 https://www.handhelds.org/moin/moin.cgi/SiemensSX1
150 for more information.
151 Say Y here if you have such a phone, say NO otherwise.
152
153config MACH_NOKIA770
154 bool "Nokia 770"
155 depends on ARCH_OMAP16XX
156 help
157 Support for the Nokia 770 Internet Tablet. Say Y here if you
158 have such a device.
159
160config MACH_AMS_DELTA
161 bool "Amstrad E3 (Delta)"
162 depends on ARCH_OMAP15XX
163 select FIQ
164 select GPIO_GENERIC_PLATFORM
165 select LEDS_GPIO_REGISTER
166 select REGULATOR
167 select REGULATOR_FIXED_VOLTAGE
168 help
169 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
170 if you have such a device.
171
172config MACH_OMAP_GENERIC
173 bool "Generic OMAP board"
174 depends on ARCH_OMAP15XX || ARCH_OMAP16XX
175 help
176 Support for generic OMAP-1510, 1610 or 1710 board with
177 no FPGA. Can be used as template for porting Linux to
178 custom OMAP boards. Say Y here if you have a custom
179 board.
180
181endmenu
182
183endif