Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig ARCH_OMAP1
3 bool "TI OMAP1"
4 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
5 depends on CPU_LITTLE_ENDIAN
6 depends on ATAGS
7 select ARCH_HAS_HOLES_MEMORYMODEL
8 select ARCH_OMAP
9 select CLKSRC_MMIO
10 select FORCE_PCI if PCCARD
11 select GPIOLIB
12 help
13 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
14
15if ARCH_OMAP1
16
17menu "TI OMAP1 specific features"
18
19comment "OMAP Core Type"
20
21config ARCH_OMAP15XX
22 depends on ARCH_MULTI_V4T
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_MULTI_V5
30 bool "OMAP16xx Based System"
31 select ARCH_OMAP_OTG
32 select CPU_ARM926T
33 select OMAP_DM_TIMER
34
35config ARCH_OMAP
36 bool
37
38comment "OMAP Feature Selections"
39
40config OMAP_MUX
41 bool "OMAP multiplexing support"
42 default y
43 help
44 Pin multiplexing support for OMAP boards. If your bootloader
45 sets the multiplexing correctly, say N. Otherwise, or if unsure,
46 say Y.
47
48config OMAP_MUX_DEBUG
49 bool "Multiplexing debug output"
50 depends on OMAP_MUX
51 help
52 Makes the multiplexing functions print out a lot of debug info.
53 This is useful if you want to find out the correct values of the
54 multiplexing registers.
55
56config OMAP_MUX_WARNINGS
57 bool "Warn about pins the bootloader didn't set up"
58 depends on OMAP_MUX
59 default y
60 help
61 Choose Y here to warn whenever driver initialization logic needs
62 to change the pin multiplexing setup. When there are no warnings
63 printed, it's safe to deselect OMAP_MUX for your product.
64
65config OMAP_32K_TIMER
66 bool "Use 32KHz timer"
67 depends on ARCH_OMAP16XX
68 default ARCH_OMAP16XX
69 help
70 Select this option if you want to enable the OMAP 32KHz timer.
71 This timer saves power compared to the OMAP_MPU_TIMER, and has
72 support for no tick during idle. The 32KHz timer provides less
73 intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
74 currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
75
76 On OMAP2PLUS this value is only used for CONFIG_HZ and
77 CLOCK_TICK_RATE compile time calculation.
78 The actual timer selection is done in the board file
79 through the (DT_)MACHINE_START structure.
80
81config OMAP_MPU_TIMER
82 bool "Use mpu timer"
83 depends on ARCH_OMAP1
84 help
85 Select this option if you want to use the OMAP mpu timer. This
86 timer provides more intra-tick resolution than the 32KHz timer,
87 but consumes more power.
88
89config OMAP_SERIAL_WAKE
90 bool "Enable wake-up events for serial ports"
91 depends on ARCH_OMAP1 && OMAP_MUX
92 default y
93 help
94 Select this option if you want to have your system wake up
95 to data on the serial RX line. This allows you to wake the
96 system from serial console.
97
98config OMAP_RESET_CLOCKS
99 bool "Reset unused clocks during boot"
100 depends on ARCH_OMAP
101 help
102 Say Y if you want to reset unused clocks during boot.
103 This option saves power, but assumes all drivers are
104 using the clock framework. Broken drivers that do not
105 yet use clock framework may not work with this option.
106 If you are booting from another operating system, you
107 probably do not want this option enabled until your
108 device drivers work properly.
109
110config ARCH_OMAP_OTG
111 bool
112
113comment "OMAP Board Type"
114
115config MACH_OMAP_OSK
116 bool "TI OSK Support"
117 depends on ARCH_OMAP16XX
118 help
119 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
120 if you have such a board.
121
122config MACH_OMAP_PALMTE
123 bool "Palm Tungsten E"
124 depends on ARCH_OMAP15XX
125 help
126 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
127 need a PalmOS compatible bootloader; check out
128 http://palmtelinux.sourceforge.net/ for more information.
129 Say Y here if you have this PDA model, say N otherwise.
130
131config MACH_SX1
132 bool "Siemens SX1"
133 depends on ARCH_OMAP15XX
134 select I2C
135 help
136 Support for the Siemens SX1 phone. To boot the kernel,
137 you'll need a SX1 compatible bootloader; check out
138 http://forum.oslik.ru and
139 https://www.handhelds.org/moin/moin.cgi/SiemensSX1
140 for more information.
141 Say Y here if you have such a phone, say NO otherwise.
142
143config MACH_NOKIA770
144 bool "Nokia 770"
145 depends on ARCH_OMAP16XX
146 help
147 Support for the Nokia 770 Internet Tablet. Say Y here if you
148 have such a device.
149
150config MACH_AMS_DELTA
151 bool "Amstrad E3 (Delta)"
152 depends on ARCH_OMAP15XX
153 select FIQ
154 select GPIO_GENERIC_PLATFORM
155 select LEDS_GPIO_REGISTER
156 select REGULATOR
157 select REGULATOR_FIXED_VOLTAGE
158 help
159 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
160 if you have such a device.
161
162endmenu
163
164endif
1if ARCH_OMAP1
2
3menu "TI OMAP1 specific features"
4
5comment "OMAP Core Type"
6 depends on ARCH_OMAP1
7
8config ARCH_OMAP730
9 depends on ARCH_OMAP1
10 bool "OMAP730 Based System"
11 select CPU_ARM926T
12 select OMAP_MPU_TIMER
13 select ARCH_OMAP_OTG
14
15config ARCH_OMAP850
16 depends on ARCH_OMAP1
17 bool "OMAP850 Based System"
18 select CPU_ARM926T
19 select ARCH_OMAP_OTG
20
21config ARCH_OMAP15XX
22 depends on ARCH_OMAP1
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_OMAP1
30 bool "OMAP16xx Based System"
31 select CPU_ARM926T
32 select ARCH_OMAP_OTG
33
34comment "OMAP Board Type"
35 depends on ARCH_OMAP1
36
37config MACH_OMAP_INNOVATOR
38 bool "TI Innovator"
39 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
40 help
41 TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
42 have such a board.
43
44config MACH_OMAP_H2
45 bool "TI H2 Support"
46 depends on ARCH_OMAP1 && ARCH_OMAP16XX
47 help
48 TI OMAP 1610/1611B H2 board support. Say Y here if you have such
49 a board.
50
51config MACH_OMAP_H3
52 bool "TI H3 Support"
53 depends on ARCH_OMAP1 && ARCH_OMAP16XX
54 help
55 TI OMAP 1710 H3 board support. Say Y here if you have such
56 a board.
57
58config MACH_OMAP_HTCWIZARD
59 bool "HTC Wizard"
60 depends on ARCH_OMAP850
61 help
62 HTC Wizard smartphone support (AKA QTEK 9100, ...)
63
64config MACH_HERALD
65 bool "HTC Herald"
66 depends on ARCH_OMAP850
67 help
68 HTC Herald smartphone support (AKA T-Mobile Wing, ...)
69
70config MACH_OMAP_OSK
71 bool "TI OSK Support"
72 depends on ARCH_OMAP1 && ARCH_OMAP16XX
73 help
74 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
75 if you have such a board.
76
77config OMAP_OSK_MISTRAL
78 bool "Mistral QVGA board Support"
79 depends on MACH_OMAP_OSK
80 help
81 The OSK supports an optional add-on board with a Quarter-VGA
82 touchscreen, PDA-ish buttons, a resume button, bicolor LED,
83 and camera connector. Say Y here if you have this board.
84
85config MACH_OMAP_PERSEUS2
86 bool "TI Perseus2"
87 depends on ARCH_OMAP1 && ARCH_OMAP730
88 help
89 Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
90 a board.
91
92config MACH_OMAP_FSAMPLE
93 bool "TI F-Sample"
94 depends on ARCH_OMAP1 && ARCH_OMAP730
95 help
96 Support for TI OMAP 850 F-Sample board. Say Y here if you have such
97 a board.
98
99config MACH_VOICEBLUE
100 bool "Voiceblue"
101 depends on ARCH_OMAP1 && ARCH_OMAP15XX
102 help
103 Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
104 such a board.
105
106config MACH_OMAP_PALMTE
107 bool "Palm Tungsten E"
108 depends on ARCH_OMAP1 && ARCH_OMAP15XX
109 help
110 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
111 need a PalmOS compatible bootloader; check out
112 http://palmtelinux.sourceforge.net/ for more information.
113 Say Y here if you have this PDA model, say N otherwise.
114
115config MACH_OMAP_PALMZ71
116 bool "Palm Zire71"
117 depends on ARCH_OMAP1 && ARCH_OMAP15XX
118 help
119 Support for the Palm Zire71 PDA. To boot the kernel,
120 you'll need a PalmOS compatible bootloader; check out
121 http://hackndev.com/palm/z71 for more information.
122 Say Y here if you have such a PDA, say N otherwise.
123
124config MACH_OMAP_PALMTT
125 bool "Palm Tungsten|T"
126 depends on ARCH_OMAP1 && ARCH_OMAP15XX
127 help
128 Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
129 need a PalmOS compatible bootloader (Garux); check out
130 http://garux.sourceforge.net/ for more information.
131 Say Y here if you have this PDA model, say N otherwise.
132
133config MACH_SX1
134 bool "Siemens SX1"
135 select I2C
136 depends on ARCH_OMAP1 && ARCH_OMAP15XX
137 help
138 Support for the Siemens SX1 phone. To boot the kernel,
139 you'll need a SX1 compatible bootloader; check out
140 http://forum.oslik.ru and
141 http://www.handhelds.org/moin/moin.cgi/SiemensSX1
142 for more information.
143 Say Y here if you have such a phone, say NO otherwise.
144
145config MACH_NOKIA770
146 bool "Nokia 770"
147 depends on ARCH_OMAP1 && ARCH_OMAP16XX
148 help
149 Support for the Nokia 770 Internet Tablet. Say Y here if you
150 have such a device.
151
152config MACH_AMS_DELTA
153 bool "Amstrad E3 (Delta)"
154 depends on ARCH_OMAP1 && ARCH_OMAP15XX
155 select FIQ
156 select GPIO_GENERIC_PLATFORM
157 select LEDS_GPIO_REGISTER
158 select REGULATOR
159 select REGULATOR_FIXED_VOLTAGE
160 help
161 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
162 if you have such a device.
163
164config MACH_OMAP_GENERIC
165 bool "Generic OMAP board"
166 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
167 help
168 Support for generic OMAP-1510, 1610 or 1710 board with
169 no FPGA. Can be used as template for porting Linux to
170 custom OMAP boards. Say Y here if you have a custom
171 board.
172
173endmenu
174
175endif