Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig ARCH_OMAP1
3 bool "TI OMAP1"
4 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
5 depends on CPU_LITTLE_ENDIAN
6 depends on ATAGS
7 select ARCH_HAS_HOLES_MEMORYMODEL
8 select ARCH_OMAP
9 select CLKSRC_MMIO
10 select FORCE_PCI if PCCARD
11 select GPIOLIB
12 help
13 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
14
15if ARCH_OMAP1
16
17menu "TI OMAP1 specific features"
18
19comment "OMAP Core Type"
20
21config ARCH_OMAP15XX
22 depends on ARCH_MULTI_V4T
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_MULTI_V5
30 bool "OMAP16xx Based System"
31 select ARCH_OMAP_OTG
32 select CPU_ARM926T
33 select OMAP_DM_TIMER
34
35config ARCH_OMAP
36 bool
37
38comment "OMAP Feature Selections"
39
40config OMAP_MUX
41 bool "OMAP multiplexing support"
42 default y
43 help
44 Pin multiplexing support for OMAP boards. If your bootloader
45 sets the multiplexing correctly, say N. Otherwise, or if unsure,
46 say Y.
47
48config OMAP_MUX_DEBUG
49 bool "Multiplexing debug output"
50 depends on OMAP_MUX
51 help
52 Makes the multiplexing functions print out a lot of debug info.
53 This is useful if you want to find out the correct values of the
54 multiplexing registers.
55
56config OMAP_MUX_WARNINGS
57 bool "Warn about pins the bootloader didn't set up"
58 depends on OMAP_MUX
59 default y
60 help
61 Choose Y here to warn whenever driver initialization logic needs
62 to change the pin multiplexing setup. When there are no warnings
63 printed, it's safe to deselect OMAP_MUX for your product.
64
65config OMAP_32K_TIMER
66 bool "Use 32KHz timer"
67 depends on ARCH_OMAP16XX
68 default ARCH_OMAP16XX
69 help
70 Select this option if you want to enable the OMAP 32KHz timer.
71 This timer saves power compared to the OMAP_MPU_TIMER, and has
72 support for no tick during idle. The 32KHz timer provides less
73 intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
74 currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
75
76 On OMAP2PLUS this value is only used for CONFIG_HZ and
77 CLOCK_TICK_RATE compile time calculation.
78 The actual timer selection is done in the board file
79 through the (DT_)MACHINE_START structure.
80
81config OMAP_MPU_TIMER
82 bool "Use mpu timer"
83 depends on ARCH_OMAP1
84 help
85 Select this option if you want to use the OMAP mpu timer. This
86 timer provides more intra-tick resolution than the 32KHz timer,
87 but consumes more power.
88
89config OMAP_SERIAL_WAKE
90 bool "Enable wake-up events for serial ports"
91 depends on ARCH_OMAP1 && OMAP_MUX
92 default y
93 help
94 Select this option if you want to have your system wake up
95 to data on the serial RX line. This allows you to wake the
96 system from serial console.
97
98config OMAP_RESET_CLOCKS
99 bool "Reset unused clocks during boot"
100 depends on ARCH_OMAP
101 help
102 Say Y if you want to reset unused clocks during boot.
103 This option saves power, but assumes all drivers are
104 using the clock framework. Broken drivers that do not
105 yet use clock framework may not work with this option.
106 If you are booting from another operating system, you
107 probably do not want this option enabled until your
108 device drivers work properly.
109
110config ARCH_OMAP_OTG
111 bool
112
113comment "OMAP Board Type"
114
115config MACH_OMAP_OSK
116 bool "TI OSK Support"
117 depends on ARCH_OMAP16XX
118 help
119 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
120 if you have such a board.
121
122config MACH_OMAP_PALMTE
123 bool "Palm Tungsten E"
124 depends on ARCH_OMAP15XX
125 help
126 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
127 need a PalmOS compatible bootloader; check out
128 http://palmtelinux.sourceforge.net/ for more information.
129 Say Y here if you have this PDA model, say N otherwise.
130
131config MACH_SX1
132 bool "Siemens SX1"
133 depends on ARCH_OMAP15XX
134 select I2C
135 help
136 Support for the Siemens SX1 phone. To boot the kernel,
137 you'll need a SX1 compatible bootloader; check out
138 http://forum.oslik.ru and
139 https://www.handhelds.org/moin/moin.cgi/SiemensSX1
140 for more information.
141 Say Y here if you have such a phone, say NO otherwise.
142
143config MACH_NOKIA770
144 bool "Nokia 770"
145 depends on ARCH_OMAP16XX
146 help
147 Support for the Nokia 770 Internet Tablet. Say Y here if you
148 have such a device.
149
150config MACH_AMS_DELTA
151 bool "Amstrad E3 (Delta)"
152 depends on ARCH_OMAP15XX
153 select FIQ
154 select GPIO_GENERIC_PLATFORM
155 select LEDS_GPIO_REGISTER
156 select REGULATOR
157 select REGULATOR_FIXED_VOLTAGE
158 help
159 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
160 if you have such a device.
161
162endmenu
163
164endif
1if ARCH_OMAP1
2
3menu "TI OMAP1 specific features"
4
5comment "OMAP Core Type"
6 depends on ARCH_OMAP1
7
8config ARCH_OMAP730
9 depends on ARCH_OMAP1
10 bool "OMAP730 Based System"
11 select CPU_ARM926T
12 select OMAP_MPU_TIMER
13 select ARCH_OMAP_OTG
14
15config ARCH_OMAP850
16 depends on ARCH_OMAP1
17 bool "OMAP850 Based System"
18 select CPU_ARM926T
19 select ARCH_OMAP_OTG
20
21config ARCH_OMAP15XX
22 depends on ARCH_OMAP1
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_OMAP1
30 bool "OMAP16xx Based System"
31 select CPU_ARM926T
32 select ARCH_OMAP_OTG
33
34comment "OMAP Board Type"
35 depends on ARCH_OMAP1
36
37config MACH_OMAP_INNOVATOR
38 bool "TI Innovator"
39 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
40 select OMAP_MCBSP
41 help
42 TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
43 have such a board.
44
45config MACH_OMAP_H2
46 bool "TI H2 Support"
47 depends on ARCH_OMAP1 && ARCH_OMAP16XX
48 select OMAP_MCBSP
49 help
50 TI OMAP 1610/1611B H2 board support. Say Y here if you have such
51 a board.
52
53config MACH_OMAP_H3
54 bool "TI H3 Support"
55 depends on ARCH_OMAP1 && ARCH_OMAP16XX
56 help
57 TI OMAP 1710 H3 board support. Say Y here if you have such
58 a board.
59
60config MACH_OMAP_HTCWIZARD
61 bool "HTC Wizard"
62 depends on ARCH_OMAP850
63 help
64 HTC Wizard smartphone support (AKA QTEK 9100, ...)
65
66config MACH_HERALD
67 bool "HTC Herald"
68 depends on ARCH_OMAP850
69 help
70 HTC Herald smartphone support (AKA T-Mobile Wing, ...)
71
72config MACH_OMAP_OSK
73 bool "TI OSK Support"
74 depends on ARCH_OMAP1 && ARCH_OMAP16XX
75 select OMAP_MCBSP
76 help
77 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
78 if you have such a board.
79
80config OMAP_OSK_MISTRAL
81 bool "Mistral QVGA board Support"
82 depends on MACH_OMAP_OSK
83 help
84 The OSK supports an optional add-on board with a Quarter-VGA
85 touchscreen, PDA-ish buttons, a resume button, bicolor LED,
86 and camera connector. Say Y here if you have this board.
87
88config MACH_OMAP_PERSEUS2
89 bool "TI Perseus2"
90 depends on ARCH_OMAP1 && ARCH_OMAP730
91 help
92 Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
93 a board.
94
95config MACH_OMAP_FSAMPLE
96 bool "TI F-Sample"
97 depends on ARCH_OMAP1 && ARCH_OMAP730
98 help
99 Support for TI OMAP 850 F-Sample board. Say Y here if you have such
100 a board.
101
102config MACH_VOICEBLUE
103 bool "Voiceblue"
104 depends on ARCH_OMAP1 && ARCH_OMAP15XX
105 help
106 Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
107 such a board.
108
109config MACH_OMAP_PALMTE
110 bool "Palm Tungsten E"
111 depends on ARCH_OMAP1 && ARCH_OMAP15XX
112 help
113 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
114 need a PalmOS compatible bootloader; check out
115 http://palmtelinux.sourceforge.net/ for more information.
116 Say Y here if you have this PDA model, say N otherwise.
117
118config MACH_OMAP_PALMZ71
119 bool "Palm Zire71"
120 depends on ARCH_OMAP1 && ARCH_OMAP15XX
121 help
122 Support for the Palm Zire71 PDA. To boot the kernel,
123 you'll need a PalmOS compatible bootloader; check out
124 http://hackndev.com/palm/z71 for more information.
125 Say Y here if you have such a PDA, say N otherwise.
126
127config MACH_OMAP_PALMTT
128 bool "Palm Tungsten|T"
129 depends on ARCH_OMAP1 && ARCH_OMAP15XX
130 help
131 Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
132 need a PalmOS compatible bootloader (Garux); check out
133 http://garux.sourceforge.net/ for more information.
134 Say Y here if you have this PDA model, say N otherwise.
135
136config MACH_SX1
137 bool "Siemens SX1"
138 depends on ARCH_OMAP1 && ARCH_OMAP15XX
139 help
140 Support for the Siemens SX1 phone. To boot the kernel,
141 you'll need a SX1 compatible bootloader; check out
142 http://forum.oslik.ru and
143 http://www.handhelds.org/moin/moin.cgi/SiemensSX1
144 for more information.
145 Say Y here if you have such a phone, say NO otherwise.
146
147config MACH_NOKIA770
148 bool "Nokia 770"
149 depends on ARCH_OMAP1 && ARCH_OMAP16XX
150 help
151 Support for the Nokia 770 Internet Tablet. Say Y here if you
152 have such a device.
153
154config MACH_AMS_DELTA
155 bool "Amstrad E3 (Delta)"
156 depends on ARCH_OMAP1 && ARCH_OMAP15XX
157 select FIQ
158 help
159 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
160 if you have such a device.
161
162config MACH_OMAP_GENERIC
163 bool "Generic OMAP board"
164 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
165 help
166 Support for generic OMAP-1510, 1610 or 1710 board with
167 no FPGA. Can be used as template for porting Linux to
168 custom OMAP boards. Say Y here if you have a custom
169 board.
170
171comment "OMAP CPU Speed"
172 depends on ARCH_OMAP1
173
174config OMAP_CLOCKS_SET_BY_BOOTLOADER
175 bool "OMAP clocks set by bootloader"
176 depends on ARCH_OMAP1
177 help
178 Enable this option to prevent the kernel from overriding the clock
179 frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
180 internal LCD controller and MPU peripherals.
181
182config OMAP_ARM_216MHZ
183 bool "OMAP ARM 216 MHz CPU (1710 only)"
184 depends on ARCH_OMAP1 && ARCH_OMAP16XX
185 help
186 Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N.
187
188config OMAP_ARM_195MHZ
189 bool "OMAP ARM 195 MHz CPU"
190 depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
191 help
192 Enable 195MHz clock for OMAP CPU. If unsure, say N.
193
194config OMAP_ARM_192MHZ
195 bool "OMAP ARM 192 MHz CPU"
196 depends on ARCH_OMAP1 && ARCH_OMAP16XX
197 help
198 Enable 192MHz clock for OMAP CPU. If unsure, say N.
199
200config OMAP_ARM_182MHZ
201 bool "OMAP ARM 182 MHz CPU"
202 depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
203 help
204 Enable 182MHz clock for OMAP CPU. If unsure, say N.
205
206config OMAP_ARM_168MHZ
207 bool "OMAP ARM 168 MHz CPU"
208 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
209 help
210 Enable 168MHz clock for OMAP CPU. If unsure, say N.
211
212config OMAP_ARM_150MHZ
213 bool "OMAP ARM 150 MHz CPU"
214 depends on ARCH_OMAP1 && ARCH_OMAP15XX
215 help
216 Enable 150MHz clock for OMAP CPU. If unsure, say N.
217
218config OMAP_ARM_120MHZ
219 bool "OMAP ARM 120 MHz CPU"
220 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
221 help
222 Enable 120MHz clock for OMAP CPU. If unsure, say N.
223
224config OMAP_ARM_96MHZ
225 bool "OMAP ARM 96 MHz CPU"
226 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
227 help
228 Enable 96MHz clock for OMAP CPU. If unsure, say N.
229
230config OMAP_ARM_60MHZ
231 bool "OMAP ARM 60 MHz CPU"
232 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
233 default y
234 help
235 Enable 60MHz clock for OMAP CPU. If unsure, say Y.
236
237config OMAP_ARM_30MHZ
238 bool "OMAP ARM 30 MHz CPU"
239 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
240 help
241 Enable 30MHz clock for OMAP CPU. If unsure, say N.
242
243endmenu
244
245endif