Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig ARCH_OMAP1
3 bool "TI OMAP1"
4 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
5 depends on CPU_LITTLE_ENDIAN
6 depends on ATAGS
7 select ARCH_HAS_HOLES_MEMORYMODEL
8 select ARCH_OMAP
9 select CLKSRC_MMIO
10 select FORCE_PCI if PCCARD
11 select GPIOLIB
12 help
13 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
14
15if ARCH_OMAP1
16
17menu "TI OMAP1 specific features"
18
19comment "OMAP Core Type"
20
21config ARCH_OMAP15XX
22 depends on ARCH_MULTI_V4T
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_MULTI_V5
30 bool "OMAP16xx Based System"
31 select ARCH_OMAP_OTG
32 select CPU_ARM926T
33 select OMAP_DM_TIMER
34
35config ARCH_OMAP
36 bool
37
38comment "OMAP Feature Selections"
39
40config OMAP_MUX
41 bool "OMAP multiplexing support"
42 default y
43 help
44 Pin multiplexing support for OMAP boards. If your bootloader
45 sets the multiplexing correctly, say N. Otherwise, or if unsure,
46 say Y.
47
48config OMAP_MUX_DEBUG
49 bool "Multiplexing debug output"
50 depends on OMAP_MUX
51 help
52 Makes the multiplexing functions print out a lot of debug info.
53 This is useful if you want to find out the correct values of the
54 multiplexing registers.
55
56config OMAP_MUX_WARNINGS
57 bool "Warn about pins the bootloader didn't set up"
58 depends on OMAP_MUX
59 default y
60 help
61 Choose Y here to warn whenever driver initialization logic needs
62 to change the pin multiplexing setup. When there are no warnings
63 printed, it's safe to deselect OMAP_MUX for your product.
64
65config OMAP_32K_TIMER
66 bool "Use 32KHz timer"
67 depends on ARCH_OMAP16XX
68 default ARCH_OMAP16XX
69 help
70 Select this option if you want to enable the OMAP 32KHz timer.
71 This timer saves power compared to the OMAP_MPU_TIMER, and has
72 support for no tick during idle. The 32KHz timer provides less
73 intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
74 currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
75
76 On OMAP2PLUS this value is only used for CONFIG_HZ and
77 CLOCK_TICK_RATE compile time calculation.
78 The actual timer selection is done in the board file
79 through the (DT_)MACHINE_START structure.
80
81config OMAP_MPU_TIMER
82 bool "Use mpu timer"
83 depends on ARCH_OMAP1
84 help
85 Select this option if you want to use the OMAP mpu timer. This
86 timer provides more intra-tick resolution than the 32KHz timer,
87 but consumes more power.
88
89config OMAP_SERIAL_WAKE
90 bool "Enable wake-up events for serial ports"
91 depends on ARCH_OMAP1 && OMAP_MUX
92 default y
93 help
94 Select this option if you want to have your system wake up
95 to data on the serial RX line. This allows you to wake the
96 system from serial console.
97
98config OMAP_RESET_CLOCKS
99 bool "Reset unused clocks during boot"
100 depends on ARCH_OMAP
101 help
102 Say Y if you want to reset unused clocks during boot.
103 This option saves power, but assumes all drivers are
104 using the clock framework. Broken drivers that do not
105 yet use clock framework may not work with this option.
106 If you are booting from another operating system, you
107 probably do not want this option enabled until your
108 device drivers work properly.
109
110config ARCH_OMAP_OTG
111 bool
112
113comment "OMAP Board Type"
114
115config MACH_OMAP_OSK
116 bool "TI OSK Support"
117 depends on ARCH_OMAP16XX
118 help
119 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
120 if you have such a board.
121
122config MACH_OMAP_PALMTE
123 bool "Palm Tungsten E"
124 depends on ARCH_OMAP15XX
125 help
126 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
127 need a PalmOS compatible bootloader; check out
128 http://palmtelinux.sourceforge.net/ for more information.
129 Say Y here if you have this PDA model, say N otherwise.
130
131config MACH_SX1
132 bool "Siemens SX1"
133 depends on ARCH_OMAP15XX
134 select I2C
135 help
136 Support for the Siemens SX1 phone. To boot the kernel,
137 you'll need a SX1 compatible bootloader; check out
138 http://forum.oslik.ru and
139 https://www.handhelds.org/moin/moin.cgi/SiemensSX1
140 for more information.
141 Say Y here if you have such a phone, say NO otherwise.
142
143config MACH_NOKIA770
144 bool "Nokia 770"
145 depends on ARCH_OMAP16XX
146 help
147 Support for the Nokia 770 Internet Tablet. Say Y here if you
148 have such a device.
149
150config MACH_AMS_DELTA
151 bool "Amstrad E3 (Delta)"
152 depends on ARCH_OMAP15XX
153 select FIQ
154 select GPIO_GENERIC_PLATFORM
155 select LEDS_GPIO_REGISTER
156 select REGULATOR
157 select REGULATOR_FIXED_VOLTAGE
158 help
159 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
160 if you have such a device.
161
162endmenu
163
164endif
1if ARCH_OMAP1
2
3menu "TI OMAP1 specific features"
4
5comment "OMAP Core Type"
6 depends on ARCH_OMAP1
7
8config ARCH_OMAP730
9 depends on ARCH_OMAP1
10 bool "OMAP730 Based System"
11 select ARCH_OMAP_OTG
12 select CPU_ARM926T
13 select OMAP_MPU_TIMER
14
15config ARCH_OMAP850
16 depends on ARCH_OMAP1
17 bool "OMAP850 Based System"
18 select ARCH_OMAP_OTG
19 select CPU_ARM926T
20
21config ARCH_OMAP15XX
22 depends on ARCH_OMAP1
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_OMAP1
30 bool "OMAP16xx Based System"
31 select ARCH_OMAP_OTG
32 select CPU_ARM926T
33
34comment "OMAP Board Type"
35 depends on ARCH_OMAP1
36
37config MACH_OMAP_INNOVATOR
38 bool "TI Innovator"
39 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
40 help
41 TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
42 have such a board.
43
44config MACH_OMAP_H2
45 bool "TI H2 Support"
46 depends on ARCH_OMAP1 && ARCH_OMAP16XX
47 help
48 TI OMAP 1610/1611B H2 board support. Say Y here if you have such
49 a board.
50
51config MACH_OMAP_H3
52 bool "TI H3 Support"
53 depends on ARCH_OMAP1 && ARCH_OMAP16XX
54 help
55 TI OMAP 1710 H3 board support. Say Y here if you have such
56 a board.
57
58config MACH_HERALD
59 bool "HTC Herald"
60 depends on ARCH_OMAP850
61 help
62 HTC Herald smartphone support (AKA T-Mobile Wing, ...)
63
64config MACH_OMAP_OSK
65 bool "TI OSK Support"
66 depends on ARCH_OMAP1 && ARCH_OMAP16XX
67 help
68 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
69 if you have such a board.
70
71config OMAP_OSK_MISTRAL
72 bool "Mistral QVGA board Support"
73 depends on MACH_OMAP_OSK
74 help
75 The OSK supports an optional add-on board with a Quarter-VGA
76 touchscreen, PDA-ish buttons, a resume button, bicolor LED,
77 and camera connector. Say Y here if you have this board.
78
79config MACH_OMAP_PERSEUS2
80 bool "TI Perseus2"
81 depends on ARCH_OMAP1 && ARCH_OMAP730
82 help
83 Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
84 a board.
85
86config MACH_OMAP_FSAMPLE
87 bool "TI F-Sample"
88 depends on ARCH_OMAP1 && ARCH_OMAP730
89 help
90 Support for TI OMAP 850 F-Sample board. Say Y here if you have such
91 a board.
92
93config MACH_VOICEBLUE
94 bool "Voiceblue"
95 depends on ARCH_OMAP1 && ARCH_OMAP15XX
96 help
97 Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
98 such a board.
99
100config MACH_OMAP_PALMTE
101 bool "Palm Tungsten E"
102 depends on ARCH_OMAP1 && ARCH_OMAP15XX
103 help
104 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
105 need a PalmOS compatible bootloader; check out
106 http://palmtelinux.sourceforge.net/ for more information.
107 Say Y here if you have this PDA model, say N otherwise.
108
109config MACH_OMAP_PALMZ71
110 bool "Palm Zire71"
111 depends on ARCH_OMAP1 && ARCH_OMAP15XX
112 help
113 Support for the Palm Zire71 PDA. To boot the kernel,
114 you'll need a PalmOS compatible bootloader; check out
115 http://hackndev.com/palm/z71 for more information.
116 Say Y here if you have such a PDA, say N otherwise.
117
118config MACH_OMAP_PALMTT
119 bool "Palm Tungsten|T"
120 depends on ARCH_OMAP1 && ARCH_OMAP15XX
121 help
122 Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
123 need a PalmOS compatible bootloader (Garux); check out
124 http://garux.sourceforge.net/ for more information.
125 Say Y here if you have this PDA model, say N otherwise.
126
127config MACH_SX1
128 bool "Siemens SX1"
129 depends on ARCH_OMAP1 && ARCH_OMAP15XX
130 select I2C
131 help
132 Support for the Siemens SX1 phone. To boot the kernel,
133 you'll need a SX1 compatible bootloader; check out
134 http://forum.oslik.ru and
135 http://www.handhelds.org/moin/moin.cgi/SiemensSX1
136 for more information.
137 Say Y here if you have such a phone, say NO otherwise.
138
139config MACH_NOKIA770
140 bool "Nokia 770"
141 depends on ARCH_OMAP1 && ARCH_OMAP16XX
142 help
143 Support for the Nokia 770 Internet Tablet. Say Y here if you
144 have such a device.
145
146config MACH_AMS_DELTA
147 bool "Amstrad E3 (Delta)"
148 depends on ARCH_OMAP1 && ARCH_OMAP15XX
149 select FIQ
150 select GPIO_GENERIC_PLATFORM
151 select LEDS_GPIO_REGISTER
152 select REGULATOR
153 select REGULATOR_FIXED_VOLTAGE
154 help
155 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
156 if you have such a device.
157
158config MACH_OMAP_GENERIC
159 bool "Generic OMAP board"
160 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
161 help
162 Support for generic OMAP-1510, 1610 or 1710 board with
163 no FPGA. Can be used as template for porting Linux to
164 custom OMAP boards. Say Y here if you have a custom
165 board.
166
167endmenu
168
169endif