Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig ARCH_OMAP1
3 bool "TI OMAP1"
4 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
5 depends on CPU_LITTLE_ENDIAN
6 depends on ATAGS
7 select ARCH_HAS_HOLES_MEMORYMODEL
8 select ARCH_OMAP
9 select CLKSRC_MMIO
10 select FORCE_PCI if PCCARD
11 select GPIOLIB
12 help
13 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
14
15if ARCH_OMAP1
16
17menu "TI OMAP1 specific features"
18
19comment "OMAP Core Type"
20
21config ARCH_OMAP15XX
22 depends on ARCH_MULTI_V4T
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_MULTI_V5
30 bool "OMAP16xx Based System"
31 select ARCH_OMAP_OTG
32 select CPU_ARM926T
33 select OMAP_DM_TIMER
34
35config ARCH_OMAP
36 bool
37
38comment "OMAP Feature Selections"
39
40config OMAP_MUX
41 bool "OMAP multiplexing support"
42 default y
43 help
44 Pin multiplexing support for OMAP boards. If your bootloader
45 sets the multiplexing correctly, say N. Otherwise, or if unsure,
46 say Y.
47
48config OMAP_MUX_DEBUG
49 bool "Multiplexing debug output"
50 depends on OMAP_MUX
51 help
52 Makes the multiplexing functions print out a lot of debug info.
53 This is useful if you want to find out the correct values of the
54 multiplexing registers.
55
56config OMAP_MUX_WARNINGS
57 bool "Warn about pins the bootloader didn't set up"
58 depends on OMAP_MUX
59 default y
60 help
61 Choose Y here to warn whenever driver initialization logic needs
62 to change the pin multiplexing setup. When there are no warnings
63 printed, it's safe to deselect OMAP_MUX for your product.
64
65config OMAP_32K_TIMER
66 bool "Use 32KHz timer"
67 depends on ARCH_OMAP16XX
68 default ARCH_OMAP16XX
69 help
70 Select this option if you want to enable the OMAP 32KHz timer.
71 This timer saves power compared to the OMAP_MPU_TIMER, and has
72 support for no tick during idle. The 32KHz timer provides less
73 intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
74 currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
75
76 On OMAP2PLUS this value is only used for CONFIG_HZ and
77 CLOCK_TICK_RATE compile time calculation.
78 The actual timer selection is done in the board file
79 through the (DT_)MACHINE_START structure.
80
81config OMAP_MPU_TIMER
82 bool "Use mpu timer"
83 depends on ARCH_OMAP1
84 help
85 Select this option if you want to use the OMAP mpu timer. This
86 timer provides more intra-tick resolution than the 32KHz timer,
87 but consumes more power.
88
89config OMAP_SERIAL_WAKE
90 bool "Enable wake-up events for serial ports"
91 depends on ARCH_OMAP1 && OMAP_MUX
92 default y
93 help
94 Select this option if you want to have your system wake up
95 to data on the serial RX line. This allows you to wake the
96 system from serial console.
97
98config OMAP_RESET_CLOCKS
99 bool "Reset unused clocks during boot"
100 depends on ARCH_OMAP
101 help
102 Say Y if you want to reset unused clocks during boot.
103 This option saves power, but assumes all drivers are
104 using the clock framework. Broken drivers that do not
105 yet use clock framework may not work with this option.
106 If you are booting from another operating system, you
107 probably do not want this option enabled until your
108 device drivers work properly.
109
110config ARCH_OMAP_OTG
111 bool
112
113comment "OMAP Board Type"
114
115config MACH_OMAP_OSK
116 bool "TI OSK Support"
117 depends on ARCH_OMAP16XX
118 help
119 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
120 if you have such a board.
121
122config MACH_OMAP_PALMTE
123 bool "Palm Tungsten E"
124 depends on ARCH_OMAP15XX
125 help
126 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
127 need a PalmOS compatible bootloader; check out
128 http://palmtelinux.sourceforge.net/ for more information.
129 Say Y here if you have this PDA model, say N otherwise.
130
131config MACH_SX1
132 bool "Siemens SX1"
133 depends on ARCH_OMAP15XX
134 select I2C
135 help
136 Support for the Siemens SX1 phone. To boot the kernel,
137 you'll need a SX1 compatible bootloader; check out
138 http://forum.oslik.ru and
139 https://www.handhelds.org/moin/moin.cgi/SiemensSX1
140 for more information.
141 Say Y here if you have such a phone, say NO otherwise.
142
143config MACH_NOKIA770
144 bool "Nokia 770"
145 depends on ARCH_OMAP16XX
146 help
147 Support for the Nokia 770 Internet Tablet. Say Y here if you
148 have such a device.
149
150config MACH_AMS_DELTA
151 bool "Amstrad E3 (Delta)"
152 depends on ARCH_OMAP15XX
153 select FIQ
154 select GPIO_GENERIC_PLATFORM
155 select LEDS_GPIO_REGISTER
156 select REGULATOR
157 select REGULATOR_FIXED_VOLTAGE
158 help
159 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
160 if you have such a device.
161
162endmenu
163
164endif
1if ARCH_OMAP1
2
3menu "TI OMAP1 specific features"
4
5comment "OMAP Core Type"
6 depends on ARCH_OMAP1
7
8config ARCH_OMAP730
9 depends on ARCH_OMAP1
10 bool "OMAP730 Based System"
11 select ARCH_OMAP_OTG
12 select CPU_ARM926T
13 select OMAP_MPU_TIMER
14
15config ARCH_OMAP850
16 depends on ARCH_OMAP1
17 bool "OMAP850 Based System"
18 select ARCH_OMAP_OTG
19 select CPU_ARM926T
20
21config ARCH_OMAP15XX
22 depends on ARCH_OMAP1
23 default y
24 bool "OMAP15xx Based System"
25 select CPU_ARM925T
26 select OMAP_MPU_TIMER
27
28config ARCH_OMAP16XX
29 depends on ARCH_OMAP1
30 bool "OMAP16xx Based System"
31 select ARCH_OMAP_OTG
32 select CPU_ARM926T
33 select OMAP_DM_TIMER
34
35config OMAP_MUX
36 bool "OMAP multiplexing support"
37 depends on ARCH_OMAP
38 default y
39 help
40 Pin multiplexing support for OMAP boards. If your bootloader
41 sets the multiplexing correctly, say N. Otherwise, or if unsure,
42 say Y.
43
44config OMAP_MUX_DEBUG
45 bool "Multiplexing debug output"
46 depends on OMAP_MUX
47 help
48 Makes the multiplexing functions print out a lot of debug info.
49 This is useful if you want to find out the correct values of the
50 multiplexing registers.
51
52config OMAP_MUX_WARNINGS
53 bool "Warn about pins the bootloader didn't set up"
54 depends on OMAP_MUX
55 default y
56 help
57 Choose Y here to warn whenever driver initialization logic needs
58 to change the pin multiplexing setup. When there are no warnings
59 printed, it's safe to deselect OMAP_MUX for your product.
60
61comment "OMAP Board Type"
62 depends on ARCH_OMAP1
63
64config MACH_OMAP_INNOVATOR
65 bool "TI Innovator"
66 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
67 help
68 TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
69 have such a board.
70
71config MACH_OMAP_H2
72 bool "TI H2 Support"
73 depends on ARCH_OMAP1 && ARCH_OMAP16XX
74 help
75 TI OMAP 1610/1611B H2 board support. Say Y here if you have such
76 a board.
77
78config MACH_OMAP_H3
79 bool "TI H3 Support"
80 depends on ARCH_OMAP1 && ARCH_OMAP16XX
81 help
82 TI OMAP 1710 H3 board support. Say Y here if you have such
83 a board.
84
85config MACH_HERALD
86 bool "HTC Herald"
87 depends on ARCH_OMAP850
88 help
89 HTC Herald smartphone support (AKA T-Mobile Wing, ...)
90
91config MACH_OMAP_OSK
92 bool "TI OSK Support"
93 depends on ARCH_OMAP1 && ARCH_OMAP16XX
94 help
95 TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
96 if you have such a board.
97
98config OMAP_OSK_MISTRAL
99 bool "Mistral QVGA board Support"
100 depends on MACH_OMAP_OSK
101 help
102 The OSK supports an optional add-on board with a Quarter-VGA
103 touchscreen, PDA-ish buttons, a resume button, bicolor LED,
104 and camera connector. Say Y here if you have this board.
105
106config MACH_OMAP_PERSEUS2
107 bool "TI Perseus2"
108 depends on ARCH_OMAP1 && ARCH_OMAP730
109 help
110 Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
111 a board.
112
113config MACH_OMAP_FSAMPLE
114 bool "TI F-Sample"
115 depends on ARCH_OMAP1 && ARCH_OMAP730
116 help
117 Support for TI OMAP 850 F-Sample board. Say Y here if you have such
118 a board.
119
120config MACH_OMAP_PALMTE
121 bool "Palm Tungsten E"
122 depends on ARCH_OMAP1 && ARCH_OMAP15XX
123 help
124 Support for the Palm Tungsten E PDA. To boot the kernel, you'll
125 need a PalmOS compatible bootloader; check out
126 http://palmtelinux.sourceforge.net/ for more information.
127 Say Y here if you have this PDA model, say N otherwise.
128
129config MACH_OMAP_PALMZ71
130 bool "Palm Zire71"
131 depends on ARCH_OMAP1 && ARCH_OMAP15XX
132 help
133 Support for the Palm Zire71 PDA. To boot the kernel,
134 you'll need a PalmOS compatible bootloader; check out
135 http://hackndev.com/palm/z71 for more information.
136 Say Y here if you have such a PDA, say N otherwise.
137
138config MACH_OMAP_PALMTT
139 bool "Palm Tungsten|T"
140 depends on ARCH_OMAP1 && ARCH_OMAP15XX
141 help
142 Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
143 need a PalmOS compatible bootloader (Garux); check out
144 http://garux.sourceforge.net/ for more information.
145 Say Y here if you have this PDA model, say N otherwise.
146
147config MACH_SX1
148 bool "Siemens SX1"
149 depends on ARCH_OMAP1 && ARCH_OMAP15XX
150 select I2C
151 help
152 Support for the Siemens SX1 phone. To boot the kernel,
153 you'll need a SX1 compatible bootloader; check out
154 http://forum.oslik.ru and
155 http://www.handhelds.org/moin/moin.cgi/SiemensSX1
156 for more information.
157 Say Y here if you have such a phone, say NO otherwise.
158
159config MACH_NOKIA770
160 bool "Nokia 770"
161 depends on ARCH_OMAP1 && ARCH_OMAP16XX
162 help
163 Support for the Nokia 770 Internet Tablet. Say Y here if you
164 have such a device.
165
166config MACH_AMS_DELTA
167 bool "Amstrad E3 (Delta)"
168 depends on ARCH_OMAP1 && ARCH_OMAP15XX
169 select FIQ
170 select GPIO_GENERIC_PLATFORM
171 select LEDS_GPIO_REGISTER
172 select REGULATOR
173 select REGULATOR_FIXED_VOLTAGE
174 help
175 Support for the Amstrad E3 (codename Delta) videophone. Say Y here
176 if you have such a device.
177
178config MACH_OMAP_GENERIC
179 bool "Generic OMAP board"
180 depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
181 help
182 Support for generic OMAP-1510, 1610 or 1710 board with
183 no FPGA. Can be used as template for porting Linux to
184 custom OMAP boards. Say Y here if you have a custom
185 board.
186
187endmenu
188
189endif