Loading...
1/* linux/net/ipv4/arp.c
2 *
3 * Copyright (C) 1994 by Florian La Roche
4 *
5 * This module implements the Address Resolution Protocol ARP (RFC 826),
6 * which is used to convert IP addresses (or in the future maybe other
7 * high-level addresses) into a low-level hardware address (like an Ethernet
8 * address).
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 *
15 * Fixes:
16 * Alan Cox : Removed the Ethernet assumptions in
17 * Florian's code
18 * Alan Cox : Fixed some small errors in the ARP
19 * logic
20 * Alan Cox : Allow >4K in /proc
21 * Alan Cox : Make ARP add its own protocol entry
22 * Ross Martin : Rewrote arp_rcv() and arp_get_info()
23 * Stephen Henson : Add AX25 support to arp_get_info()
24 * Alan Cox : Drop data when a device is downed.
25 * Alan Cox : Use init_timer().
26 * Alan Cox : Double lock fixes.
27 * Martin Seine : Move the arphdr structure
28 * to if_arp.h for compatibility.
29 * with BSD based programs.
30 * Andrew Tridgell : Added ARP netmask code and
31 * re-arranged proxy handling.
32 * Alan Cox : Changed to use notifiers.
33 * Niibe Yutaka : Reply for this device or proxies only.
34 * Alan Cox : Don't proxy across hardware types!
35 * Jonathan Naylor : Added support for NET/ROM.
36 * Mike Shaver : RFC1122 checks.
37 * Jonathan Naylor : Only lookup the hardware address for
38 * the correct hardware type.
39 * Germano Caronni : Assorted subtle races.
40 * Craig Schlenter : Don't modify permanent entry
41 * during arp_rcv.
42 * Russ Nelson : Tidied up a few bits.
43 * Alexey Kuznetsov: Major changes to caching and behaviour,
44 * eg intelligent arp probing and
45 * generation
46 * of host down events.
47 * Alan Cox : Missing unlock in device events.
48 * Eckes : ARP ioctl control errors.
49 * Alexey Kuznetsov: Arp free fix.
50 * Manuel Rodriguez: Gratuitous ARP.
51 * Jonathan Layes : Added arpd support through kerneld
52 * message queue (960314)
53 * Mike Shaver : /proc/sys/net/ipv4/arp_* support
54 * Mike McLagan : Routing by source
55 * Stuart Cheshire : Metricom and grat arp fixes
56 * *** FOR 2.1 clean this up ***
57 * Lawrence V. Stefani: (08/12/96) Added FDDI support.
58 * Alan Cox : Took the AP1000 nasty FDDI hack and
59 * folded into the mainstream FDDI code.
60 * Ack spit, Linus how did you allow that
61 * one in...
62 * Jes Sorensen : Make FDDI work again in 2.1.x and
63 * clean up the APFDDI & gen. FDDI bits.
64 * Alexey Kuznetsov: new arp state machine;
65 * now it is in net/core/neighbour.c.
66 * Krzysztof Halasa: Added Frame Relay ARP support.
67 * Arnaldo C. Melo : convert /proc/net/arp to seq_file
68 * Shmulik Hen: Split arp_send to arp_create and
69 * arp_xmit so intermediate drivers like
70 * bonding can change the skb before
71 * sending (e.g. insert 8021q tag).
72 * Harald Welte : convert to make use of jenkins hash
73 * Jesper D. Brouer: Proxy ARP PVLAN RFC 3069 support.
74 */
75
76#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
77
78#include <linux/module.h>
79#include <linux/types.h>
80#include <linux/string.h>
81#include <linux/kernel.h>
82#include <linux/capability.h>
83#include <linux/socket.h>
84#include <linux/sockios.h>
85#include <linux/errno.h>
86#include <linux/in.h>
87#include <linux/mm.h>
88#include <linux/inet.h>
89#include <linux/inetdevice.h>
90#include <linux/netdevice.h>
91#include <linux/etherdevice.h>
92#include <linux/fddidevice.h>
93#include <linux/if_arp.h>
94#include <linux/skbuff.h>
95#include <linux/proc_fs.h>
96#include <linux/seq_file.h>
97#include <linux/stat.h>
98#include <linux/init.h>
99#include <linux/net.h>
100#include <linux/rcupdate.h>
101#include <linux/slab.h>
102#ifdef CONFIG_SYSCTL
103#include <linux/sysctl.h>
104#endif
105
106#include <net/net_namespace.h>
107#include <net/ip.h>
108#include <net/icmp.h>
109#include <net/route.h>
110#include <net/protocol.h>
111#include <net/tcp.h>
112#include <net/sock.h>
113#include <net/arp.h>
114#include <net/ax25.h>
115#include <net/netrom.h>
116
117#include <linux/uaccess.h>
118
119#include <linux/netfilter_arp.h>
120
121/*
122 * Interface to generic neighbour cache.
123 */
124static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 *hash_rnd);
125static int arp_constructor(struct neighbour *neigh);
126static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
127static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
128static void parp_redo(struct sk_buff *skb);
129
130static const struct neigh_ops arp_generic_ops = {
131 .family = AF_INET,
132 .solicit = arp_solicit,
133 .error_report = arp_error_report,
134 .output = neigh_resolve_output,
135 .connected_output = neigh_connected_output,
136};
137
138static const struct neigh_ops arp_hh_ops = {
139 .family = AF_INET,
140 .solicit = arp_solicit,
141 .error_report = arp_error_report,
142 .output = neigh_resolve_output,
143 .connected_output = neigh_resolve_output,
144};
145
146static const struct neigh_ops arp_direct_ops = {
147 .family = AF_INET,
148 .output = neigh_direct_output,
149 .connected_output = neigh_direct_output,
150};
151
152static const struct neigh_ops arp_broken_ops = {
153 .family = AF_INET,
154 .solicit = arp_solicit,
155 .error_report = arp_error_report,
156 .output = neigh_compat_output,
157 .connected_output = neigh_compat_output,
158};
159
160struct neigh_table arp_tbl = {
161 .family = AF_INET,
162 .key_len = 4,
163 .hash = arp_hash,
164 .constructor = arp_constructor,
165 .proxy_redo = parp_redo,
166 .id = "arp_cache",
167 .parms = {
168 .tbl = &arp_tbl,
169 .reachable_time = 30 * HZ,
170 .data = {
171 [NEIGH_VAR_MCAST_PROBES] = 3,
172 [NEIGH_VAR_UCAST_PROBES] = 3,
173 [NEIGH_VAR_RETRANS_TIME] = 1 * HZ,
174 [NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ,
175 [NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ,
176 [NEIGH_VAR_GC_STALETIME] = 60 * HZ,
177 [NEIGH_VAR_QUEUE_LEN_BYTES] = 64 * 1024,
178 [NEIGH_VAR_PROXY_QLEN] = 64,
179 [NEIGH_VAR_ANYCAST_DELAY] = 1 * HZ,
180 [NEIGH_VAR_PROXY_DELAY] = (8 * HZ) / 10,
181 [NEIGH_VAR_LOCKTIME] = 1 * HZ,
182 },
183 },
184 .gc_interval = 30 * HZ,
185 .gc_thresh1 = 128,
186 .gc_thresh2 = 512,
187 .gc_thresh3 = 1024,
188};
189EXPORT_SYMBOL(arp_tbl);
190
191int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
192{
193 switch (dev->type) {
194 case ARPHRD_ETHER:
195 case ARPHRD_FDDI:
196 case ARPHRD_IEEE802:
197 ip_eth_mc_map(addr, haddr);
198 return 0;
199 case ARPHRD_INFINIBAND:
200 ip_ib_mc_map(addr, dev->broadcast, haddr);
201 return 0;
202 case ARPHRD_IPGRE:
203 ip_ipgre_mc_map(addr, dev->broadcast, haddr);
204 return 0;
205 default:
206 if (dir) {
207 memcpy(haddr, dev->broadcast, dev->addr_len);
208 return 0;
209 }
210 }
211 return -EINVAL;
212}
213
214
215static u32 arp_hash(const void *pkey,
216 const struct net_device *dev,
217 __u32 *hash_rnd)
218{
219 return arp_hashfn(*(u32 *)pkey, dev, *hash_rnd);
220}
221
222static int arp_constructor(struct neighbour *neigh)
223{
224 __be32 addr = *(__be32 *)neigh->primary_key;
225 struct net_device *dev = neigh->dev;
226 struct in_device *in_dev;
227 struct neigh_parms *parms;
228
229 rcu_read_lock();
230 in_dev = __in_dev_get_rcu(dev);
231 if (in_dev == NULL) {
232 rcu_read_unlock();
233 return -EINVAL;
234 }
235
236 neigh->type = inet_addr_type(dev_net(dev), addr);
237
238 parms = in_dev->arp_parms;
239 __neigh_parms_put(neigh->parms);
240 neigh->parms = neigh_parms_clone(parms);
241 rcu_read_unlock();
242
243 if (!dev->header_ops) {
244 neigh->nud_state = NUD_NOARP;
245 neigh->ops = &arp_direct_ops;
246 neigh->output = neigh_direct_output;
247 } else {
248 /* Good devices (checked by reading texts, but only Ethernet is
249 tested)
250
251 ARPHRD_ETHER: (ethernet, apfddi)
252 ARPHRD_FDDI: (fddi)
253 ARPHRD_IEEE802: (tr)
254 ARPHRD_METRICOM: (strip)
255 ARPHRD_ARCNET:
256 etc. etc. etc.
257
258 ARPHRD_IPDDP will also work, if author repairs it.
259 I did not it, because this driver does not work even
260 in old paradigm.
261 */
262
263#if 1
264 /* So... these "amateur" devices are hopeless.
265 The only thing, that I can say now:
266 It is very sad that we need to keep ugly obsolete
267 code to make them happy.
268
269 They should be moved to more reasonable state, now
270 they use rebuild_header INSTEAD OF hard_start_xmit!!!
271 Besides that, they are sort of out of date
272 (a lot of redundant clones/copies, useless in 2.1),
273 I wonder why people believe that they work.
274 */
275 switch (dev->type) {
276 default:
277 break;
278 case ARPHRD_ROSE:
279#if IS_ENABLED(CONFIG_AX25)
280 case ARPHRD_AX25:
281#if IS_ENABLED(CONFIG_NETROM)
282 case ARPHRD_NETROM:
283#endif
284 neigh->ops = &arp_broken_ops;
285 neigh->output = neigh->ops->output;
286 return 0;
287#else
288 break;
289#endif
290 }
291#endif
292 if (neigh->type == RTN_MULTICAST) {
293 neigh->nud_state = NUD_NOARP;
294 arp_mc_map(addr, neigh->ha, dev, 1);
295 } else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) {
296 neigh->nud_state = NUD_NOARP;
297 memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
298 } else if (neigh->type == RTN_BROADCAST ||
299 (dev->flags & IFF_POINTOPOINT)) {
300 neigh->nud_state = NUD_NOARP;
301 memcpy(neigh->ha, dev->broadcast, dev->addr_len);
302 }
303
304 if (dev->header_ops->cache)
305 neigh->ops = &arp_hh_ops;
306 else
307 neigh->ops = &arp_generic_ops;
308
309 if (neigh->nud_state & NUD_VALID)
310 neigh->output = neigh->ops->connected_output;
311 else
312 neigh->output = neigh->ops->output;
313 }
314 return 0;
315}
316
317static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
318{
319 dst_link_failure(skb);
320 kfree_skb(skb);
321}
322
323static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
324{
325 __be32 saddr = 0;
326 u8 dst_ha[MAX_ADDR_LEN], *dst_hw = NULL;
327 struct net_device *dev = neigh->dev;
328 __be32 target = *(__be32 *)neigh->primary_key;
329 int probes = atomic_read(&neigh->probes);
330 struct in_device *in_dev;
331
332 rcu_read_lock();
333 in_dev = __in_dev_get_rcu(dev);
334 if (!in_dev) {
335 rcu_read_unlock();
336 return;
337 }
338 switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
339 default:
340 case 0: /* By default announce any local IP */
341 if (skb && inet_addr_type(dev_net(dev),
342 ip_hdr(skb)->saddr) == RTN_LOCAL)
343 saddr = ip_hdr(skb)->saddr;
344 break;
345 case 1: /* Restrict announcements of saddr in same subnet */
346 if (!skb)
347 break;
348 saddr = ip_hdr(skb)->saddr;
349 if (inet_addr_type(dev_net(dev), saddr) == RTN_LOCAL) {
350 /* saddr should be known to target */
351 if (inet_addr_onlink(in_dev, target, saddr))
352 break;
353 }
354 saddr = 0;
355 break;
356 case 2: /* Avoid secondary IPs, get a primary/preferred one */
357 break;
358 }
359 rcu_read_unlock();
360
361 if (!saddr)
362 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
363
364 probes -= NEIGH_VAR(neigh->parms, UCAST_PROBES);
365 if (probes < 0) {
366 if (!(neigh->nud_state & NUD_VALID))
367 pr_debug("trying to ucast probe in NUD_INVALID\n");
368 neigh_ha_snapshot(dst_ha, neigh, dev);
369 dst_hw = dst_ha;
370 } else {
371 probes -= NEIGH_VAR(neigh->parms, APP_PROBES);
372 if (probes < 0) {
373 neigh_app_ns(neigh);
374 return;
375 }
376 }
377
378 arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
379 dst_hw, dev->dev_addr, NULL);
380}
381
382static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
383{
384 struct net *net = dev_net(in_dev->dev);
385 int scope;
386
387 switch (IN_DEV_ARP_IGNORE(in_dev)) {
388 case 0: /* Reply, the tip is already validated */
389 return 0;
390 case 1: /* Reply only if tip is configured on the incoming interface */
391 sip = 0;
392 scope = RT_SCOPE_HOST;
393 break;
394 case 2: /*
395 * Reply only if tip is configured on the incoming interface
396 * and is in same subnet as sip
397 */
398 scope = RT_SCOPE_HOST;
399 break;
400 case 3: /* Do not reply for scope host addresses */
401 sip = 0;
402 scope = RT_SCOPE_LINK;
403 in_dev = NULL;
404 break;
405 case 4: /* Reserved */
406 case 5:
407 case 6:
408 case 7:
409 return 0;
410 case 8: /* Do not reply */
411 return 1;
412 default:
413 return 0;
414 }
415 return !inet_confirm_addr(net, in_dev, sip, tip, scope);
416}
417
418static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
419{
420 struct rtable *rt;
421 int flag = 0;
422 /*unsigned long now; */
423 struct net *net = dev_net(dev);
424
425 rt = ip_route_output(net, sip, tip, 0, 0);
426 if (IS_ERR(rt))
427 return 1;
428 if (rt->dst.dev != dev) {
429 NET_INC_STATS_BH(net, LINUX_MIB_ARPFILTER);
430 flag = 1;
431 }
432 ip_rt_put(rt);
433 return flag;
434}
435
436/* OBSOLETE FUNCTIONS */
437
438/*
439 * Find an arp mapping in the cache. If not found, post a request.
440 *
441 * It is very UGLY routine: it DOES NOT use skb->dst->neighbour,
442 * even if it exists. It is supposed that skb->dev was mangled
443 * by a virtual device (eql, shaper). Nobody but broken devices
444 * is allowed to use this function, it is scheduled to be removed. --ANK
445 */
446
447static int arp_set_predefined(int addr_hint, unsigned char *haddr,
448 __be32 paddr, struct net_device *dev)
449{
450 switch (addr_hint) {
451 case RTN_LOCAL:
452 pr_debug("arp called for own IP address\n");
453 memcpy(haddr, dev->dev_addr, dev->addr_len);
454 return 1;
455 case RTN_MULTICAST:
456 arp_mc_map(paddr, haddr, dev, 1);
457 return 1;
458 case RTN_BROADCAST:
459 memcpy(haddr, dev->broadcast, dev->addr_len);
460 return 1;
461 }
462 return 0;
463}
464
465
466int arp_find(unsigned char *haddr, struct sk_buff *skb)
467{
468 struct net_device *dev = skb->dev;
469 __be32 paddr;
470 struct neighbour *n;
471
472 if (!skb_dst(skb)) {
473 pr_debug("arp_find is called with dst==NULL\n");
474 kfree_skb(skb);
475 return 1;
476 }
477
478 paddr = rt_nexthop(skb_rtable(skb), ip_hdr(skb)->daddr);
479 if (arp_set_predefined(inet_addr_type(dev_net(dev), paddr), haddr,
480 paddr, dev))
481 return 0;
482
483 n = __neigh_lookup(&arp_tbl, &paddr, dev, 1);
484
485 if (n) {
486 n->used = jiffies;
487 if (n->nud_state & NUD_VALID || neigh_event_send(n, skb) == 0) {
488 neigh_ha_snapshot(haddr, n, dev);
489 neigh_release(n);
490 return 0;
491 }
492 neigh_release(n);
493 } else
494 kfree_skb(skb);
495 return 1;
496}
497EXPORT_SYMBOL(arp_find);
498
499/* END OF OBSOLETE FUNCTIONS */
500
501/*
502 * Check if we can use proxy ARP for this path
503 */
504static inline int arp_fwd_proxy(struct in_device *in_dev,
505 struct net_device *dev, struct rtable *rt)
506{
507 struct in_device *out_dev;
508 int imi, omi = -1;
509
510 if (rt->dst.dev == dev)
511 return 0;
512
513 if (!IN_DEV_PROXY_ARP(in_dev))
514 return 0;
515 imi = IN_DEV_MEDIUM_ID(in_dev);
516 if (imi == 0)
517 return 1;
518 if (imi == -1)
519 return 0;
520
521 /* place to check for proxy_arp for routes */
522
523 out_dev = __in_dev_get_rcu(rt->dst.dev);
524 if (out_dev)
525 omi = IN_DEV_MEDIUM_ID(out_dev);
526
527 return omi != imi && omi != -1;
528}
529
530/*
531 * Check for RFC3069 proxy arp private VLAN (allow to send back to same dev)
532 *
533 * RFC3069 supports proxy arp replies back to the same interface. This
534 * is done to support (ethernet) switch features, like RFC 3069, where
535 * the individual ports are not allowed to communicate with each
536 * other, BUT they are allowed to talk to the upstream router. As
537 * described in RFC 3069, it is possible to allow these hosts to
538 * communicate through the upstream router, by proxy_arp'ing.
539 *
540 * RFC 3069: "VLAN Aggregation for Efficient IP Address Allocation"
541 *
542 * This technology is known by different names:
543 * In RFC 3069 it is called VLAN Aggregation.
544 * Cisco and Allied Telesyn call it Private VLAN.
545 * Hewlett-Packard call it Source-Port filtering or port-isolation.
546 * Ericsson call it MAC-Forced Forwarding (RFC Draft).
547 *
548 */
549static inline int arp_fwd_pvlan(struct in_device *in_dev,
550 struct net_device *dev, struct rtable *rt,
551 __be32 sip, __be32 tip)
552{
553 /* Private VLAN is only concerned about the same ethernet segment */
554 if (rt->dst.dev != dev)
555 return 0;
556
557 /* Don't reply on self probes (often done by windowz boxes)*/
558 if (sip == tip)
559 return 0;
560
561 if (IN_DEV_PROXY_ARP_PVLAN(in_dev))
562 return 1;
563 else
564 return 0;
565}
566
567/*
568 * Interface to link layer: send routine and receive handler.
569 */
570
571/*
572 * Create an arp packet. If (dest_hw == NULL), we create a broadcast
573 * message.
574 */
575struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
576 struct net_device *dev, __be32 src_ip,
577 const unsigned char *dest_hw,
578 const unsigned char *src_hw,
579 const unsigned char *target_hw)
580{
581 struct sk_buff *skb;
582 struct arphdr *arp;
583 unsigned char *arp_ptr;
584 int hlen = LL_RESERVED_SPACE(dev);
585 int tlen = dev->needed_tailroom;
586
587 /*
588 * Allocate a buffer
589 */
590
591 skb = alloc_skb(arp_hdr_len(dev) + hlen + tlen, GFP_ATOMIC);
592 if (skb == NULL)
593 return NULL;
594
595 skb_reserve(skb, hlen);
596 skb_reset_network_header(skb);
597 arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev));
598 skb->dev = dev;
599 skb->protocol = htons(ETH_P_ARP);
600 if (src_hw == NULL)
601 src_hw = dev->dev_addr;
602 if (dest_hw == NULL)
603 dest_hw = dev->broadcast;
604
605 /*
606 * Fill the device header for the ARP frame
607 */
608 if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
609 goto out;
610
611 /*
612 * Fill out the arp protocol part.
613 *
614 * The arp hardware type should match the device type, except for FDDI,
615 * which (according to RFC 1390) should always equal 1 (Ethernet).
616 */
617 /*
618 * Exceptions everywhere. AX.25 uses the AX.25 PID value not the
619 * DIX code for the protocol. Make these device structure fields.
620 */
621 switch (dev->type) {
622 default:
623 arp->ar_hrd = htons(dev->type);
624 arp->ar_pro = htons(ETH_P_IP);
625 break;
626
627#if IS_ENABLED(CONFIG_AX25)
628 case ARPHRD_AX25:
629 arp->ar_hrd = htons(ARPHRD_AX25);
630 arp->ar_pro = htons(AX25_P_IP);
631 break;
632
633#if IS_ENABLED(CONFIG_NETROM)
634 case ARPHRD_NETROM:
635 arp->ar_hrd = htons(ARPHRD_NETROM);
636 arp->ar_pro = htons(AX25_P_IP);
637 break;
638#endif
639#endif
640
641#if IS_ENABLED(CONFIG_FDDI)
642 case ARPHRD_FDDI:
643 arp->ar_hrd = htons(ARPHRD_ETHER);
644 arp->ar_pro = htons(ETH_P_IP);
645 break;
646#endif
647 }
648
649 arp->ar_hln = dev->addr_len;
650 arp->ar_pln = 4;
651 arp->ar_op = htons(type);
652
653 arp_ptr = (unsigned char *)(arp + 1);
654
655 memcpy(arp_ptr, src_hw, dev->addr_len);
656 arp_ptr += dev->addr_len;
657 memcpy(arp_ptr, &src_ip, 4);
658 arp_ptr += 4;
659
660 switch (dev->type) {
661#if IS_ENABLED(CONFIG_FIREWIRE_NET)
662 case ARPHRD_IEEE1394:
663 break;
664#endif
665 default:
666 if (target_hw != NULL)
667 memcpy(arp_ptr, target_hw, dev->addr_len);
668 else
669 memset(arp_ptr, 0, dev->addr_len);
670 arp_ptr += dev->addr_len;
671 }
672 memcpy(arp_ptr, &dest_ip, 4);
673
674 return skb;
675
676out:
677 kfree_skb(skb);
678 return NULL;
679}
680EXPORT_SYMBOL(arp_create);
681
682/*
683 * Send an arp packet.
684 */
685void arp_xmit(struct sk_buff *skb)
686{
687 /* Send it off, maybe filter it using firewalling first. */
688 NF_HOOK(NFPROTO_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit);
689}
690EXPORT_SYMBOL(arp_xmit);
691
692/*
693 * Create and send an arp packet.
694 */
695void arp_send(int type, int ptype, __be32 dest_ip,
696 struct net_device *dev, __be32 src_ip,
697 const unsigned char *dest_hw, const unsigned char *src_hw,
698 const unsigned char *target_hw)
699{
700 struct sk_buff *skb;
701
702 /*
703 * No arp on this interface.
704 */
705
706 if (dev->flags&IFF_NOARP)
707 return;
708
709 skb = arp_create(type, ptype, dest_ip, dev, src_ip,
710 dest_hw, src_hw, target_hw);
711 if (skb == NULL)
712 return;
713
714 arp_xmit(skb);
715}
716EXPORT_SYMBOL(arp_send);
717
718/*
719 * Process an arp request.
720 */
721
722static int arp_process(struct sk_buff *skb)
723{
724 struct net_device *dev = skb->dev;
725 struct in_device *in_dev = __in_dev_get_rcu(dev);
726 struct arphdr *arp;
727 unsigned char *arp_ptr;
728 struct rtable *rt;
729 unsigned char *sha;
730 __be32 sip, tip;
731 u16 dev_type = dev->type;
732 int addr_type;
733 struct neighbour *n;
734 struct net *net = dev_net(dev);
735 bool is_garp = false;
736
737 /* arp_rcv below verifies the ARP header and verifies the device
738 * is ARP'able.
739 */
740
741 if (in_dev == NULL)
742 goto out;
743
744 arp = arp_hdr(skb);
745
746 switch (dev_type) {
747 default:
748 if (arp->ar_pro != htons(ETH_P_IP) ||
749 htons(dev_type) != arp->ar_hrd)
750 goto out;
751 break;
752 case ARPHRD_ETHER:
753 case ARPHRD_FDDI:
754 case ARPHRD_IEEE802:
755 /*
756 * ETHERNET, and Fibre Channel (which are IEEE 802
757 * devices, according to RFC 2625) devices will accept ARP
758 * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
759 * This is the case also of FDDI, where the RFC 1390 says that
760 * FDDI devices should accept ARP hardware of (1) Ethernet,
761 * however, to be more robust, we'll accept both 1 (Ethernet)
762 * or 6 (IEEE 802.2)
763 */
764 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
765 arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
766 arp->ar_pro != htons(ETH_P_IP))
767 goto out;
768 break;
769 case ARPHRD_AX25:
770 if (arp->ar_pro != htons(AX25_P_IP) ||
771 arp->ar_hrd != htons(ARPHRD_AX25))
772 goto out;
773 break;
774 case ARPHRD_NETROM:
775 if (arp->ar_pro != htons(AX25_P_IP) ||
776 arp->ar_hrd != htons(ARPHRD_NETROM))
777 goto out;
778 break;
779 }
780
781 /* Understand only these message types */
782
783 if (arp->ar_op != htons(ARPOP_REPLY) &&
784 arp->ar_op != htons(ARPOP_REQUEST))
785 goto out;
786
787/*
788 * Extract fields
789 */
790 arp_ptr = (unsigned char *)(arp + 1);
791 sha = arp_ptr;
792 arp_ptr += dev->addr_len;
793 memcpy(&sip, arp_ptr, 4);
794 arp_ptr += 4;
795 switch (dev_type) {
796#if IS_ENABLED(CONFIG_FIREWIRE_NET)
797 case ARPHRD_IEEE1394:
798 break;
799#endif
800 default:
801 arp_ptr += dev->addr_len;
802 }
803 memcpy(&tip, arp_ptr, 4);
804/*
805 * Check for bad requests for 127.x.x.x and requests for multicast
806 * addresses. If this is one such, delete it.
807 */
808 if (ipv4_is_multicast(tip) ||
809 (!IN_DEV_ROUTE_LOCALNET(in_dev) && ipv4_is_loopback(tip)))
810 goto out;
811
812/*
813 * Special case: We must set Frame Relay source Q.922 address
814 */
815 if (dev_type == ARPHRD_DLCI)
816 sha = dev->broadcast;
817
818/*
819 * Process entry. The idea here is we want to send a reply if it is a
820 * request for us or if it is a request for someone else that we hold
821 * a proxy for. We want to add an entry to our cache if it is a reply
822 * to us or if it is a request for our address.
823 * (The assumption for this last is that if someone is requesting our
824 * address, they are probably intending to talk to us, so it saves time
825 * if we cache their address. Their address is also probably not in
826 * our cache, since ours is not in their cache.)
827 *
828 * Putting this another way, we only care about replies if they are to
829 * us, in which case we add them to the cache. For requests, we care
830 * about those for us and those for our proxies. We reply to both,
831 * and in the case of requests for us we add the requester to the arp
832 * cache.
833 */
834
835 /* Special case: IPv4 duplicate address detection packet (RFC2131) */
836 if (sip == 0) {
837 if (arp->ar_op == htons(ARPOP_REQUEST) &&
838 inet_addr_type(net, tip) == RTN_LOCAL &&
839 !arp_ignore(in_dev, sip, tip))
840 arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
841 dev->dev_addr, sha);
842 goto out;
843 }
844
845 if (arp->ar_op == htons(ARPOP_REQUEST) &&
846 ip_route_input_noref(skb, tip, sip, 0, dev) == 0) {
847
848 rt = skb_rtable(skb);
849 addr_type = rt->rt_type;
850
851 if (addr_type == RTN_LOCAL) {
852 int dont_send;
853
854 dont_send = arp_ignore(in_dev, sip, tip);
855 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
856 dont_send = arp_filter(sip, tip, dev);
857 if (!dont_send) {
858 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
859 if (n) {
860 arp_send(ARPOP_REPLY, ETH_P_ARP, sip,
861 dev, tip, sha, dev->dev_addr,
862 sha);
863 neigh_release(n);
864 }
865 }
866 goto out;
867 } else if (IN_DEV_FORWARD(in_dev)) {
868 if (addr_type == RTN_UNICAST &&
869 (arp_fwd_proxy(in_dev, dev, rt) ||
870 arp_fwd_pvlan(in_dev, dev, rt, sip, tip) ||
871 (rt->dst.dev != dev &&
872 pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) {
873 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
874 if (n)
875 neigh_release(n);
876
877 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
878 skb->pkt_type == PACKET_HOST ||
879 NEIGH_VAR(in_dev->arp_parms, PROXY_DELAY) == 0) {
880 arp_send(ARPOP_REPLY, ETH_P_ARP, sip,
881 dev, tip, sha, dev->dev_addr,
882 sha);
883 } else {
884 pneigh_enqueue(&arp_tbl,
885 in_dev->arp_parms, skb);
886 return 0;
887 }
888 goto out;
889 }
890 }
891 }
892
893 /* Update our ARP tables */
894
895 n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
896
897 if (IN_DEV_ARP_ACCEPT(in_dev)) {
898 /* Unsolicited ARP is not accepted by default.
899 It is possible, that this option should be enabled for some
900 devices (strip is candidate)
901 */
902 is_garp = arp->ar_op == htons(ARPOP_REQUEST) && tip == sip &&
903 inet_addr_type(net, sip) == RTN_UNICAST;
904
905 if (n == NULL &&
906 ((arp->ar_op == htons(ARPOP_REPLY) &&
907 inet_addr_type(net, sip) == RTN_UNICAST) || is_garp))
908 n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
909 }
910
911 if (n) {
912 int state = NUD_REACHABLE;
913 int override;
914
915 /* If several different ARP replies follows back-to-back,
916 use the FIRST one. It is possible, if several proxy
917 agents are active. Taking the first reply prevents
918 arp trashing and chooses the fastest router.
919 */
920 override = time_after(jiffies,
921 n->updated +
922 NEIGH_VAR(n->parms, LOCKTIME)) ||
923 is_garp;
924
925 /* Broadcast replies and request packets
926 do not assert neighbour reachability.
927 */
928 if (arp->ar_op != htons(ARPOP_REPLY) ||
929 skb->pkt_type != PACKET_HOST)
930 state = NUD_STALE;
931 neigh_update(n, sha, state,
932 override ? NEIGH_UPDATE_F_OVERRIDE : 0);
933 neigh_release(n);
934 }
935
936out:
937 consume_skb(skb);
938 return 0;
939}
940
941static void parp_redo(struct sk_buff *skb)
942{
943 arp_process(skb);
944}
945
946
947/*
948 * Receive an arp request from the device layer.
949 */
950
951static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
952 struct packet_type *pt, struct net_device *orig_dev)
953{
954 const struct arphdr *arp;
955
956 if (dev->flags & IFF_NOARP ||
957 skb->pkt_type == PACKET_OTHERHOST ||
958 skb->pkt_type == PACKET_LOOPBACK)
959 goto freeskb;
960
961 skb = skb_share_check(skb, GFP_ATOMIC);
962 if (!skb)
963 goto out_of_mem;
964
965 /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
966 if (!pskb_may_pull(skb, arp_hdr_len(dev)))
967 goto freeskb;
968
969 arp = arp_hdr(skb);
970 if (arp->ar_hln != dev->addr_len || arp->ar_pln != 4)
971 goto freeskb;
972
973 memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
974
975 return NF_HOOK(NFPROTO_ARP, NF_ARP_IN, skb, dev, NULL, arp_process);
976
977freeskb:
978 kfree_skb(skb);
979out_of_mem:
980 return 0;
981}
982
983/*
984 * User level interface (ioctl)
985 */
986
987/*
988 * Set (create) an ARP cache entry.
989 */
990
991static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on)
992{
993 if (dev == NULL) {
994 IPV4_DEVCONF_ALL(net, PROXY_ARP) = on;
995 return 0;
996 }
997 if (__in_dev_get_rtnl(dev)) {
998 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on);
999 return 0;
1000 }
1001 return -ENXIO;
1002}
1003
1004static int arp_req_set_public(struct net *net, struct arpreq *r,
1005 struct net_device *dev)
1006{
1007 __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1008 __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1009
1010 if (mask && mask != htonl(0xFFFFFFFF))
1011 return -EINVAL;
1012 if (!dev && (r->arp_flags & ATF_COM)) {
1013 dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family,
1014 r->arp_ha.sa_data);
1015 if (!dev)
1016 return -ENODEV;
1017 }
1018 if (mask) {
1019 if (pneigh_lookup(&arp_tbl, net, &ip, dev, 1) == NULL)
1020 return -ENOBUFS;
1021 return 0;
1022 }
1023
1024 return arp_req_set_proxy(net, dev, 1);
1025}
1026
1027static int arp_req_set(struct net *net, struct arpreq *r,
1028 struct net_device *dev)
1029{
1030 __be32 ip;
1031 struct neighbour *neigh;
1032 int err;
1033
1034 if (r->arp_flags & ATF_PUBL)
1035 return arp_req_set_public(net, r, dev);
1036
1037 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1038 if (r->arp_flags & ATF_PERM)
1039 r->arp_flags |= ATF_COM;
1040 if (dev == NULL) {
1041 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1042
1043 if (IS_ERR(rt))
1044 return PTR_ERR(rt);
1045 dev = rt->dst.dev;
1046 ip_rt_put(rt);
1047 if (!dev)
1048 return -EINVAL;
1049 }
1050 switch (dev->type) {
1051#if IS_ENABLED(CONFIG_FDDI)
1052 case ARPHRD_FDDI:
1053 /*
1054 * According to RFC 1390, FDDI devices should accept ARP
1055 * hardware types of 1 (Ethernet). However, to be more
1056 * robust, we'll accept hardware types of either 1 (Ethernet)
1057 * or 6 (IEEE 802.2).
1058 */
1059 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1060 r->arp_ha.sa_family != ARPHRD_ETHER &&
1061 r->arp_ha.sa_family != ARPHRD_IEEE802)
1062 return -EINVAL;
1063 break;
1064#endif
1065 default:
1066 if (r->arp_ha.sa_family != dev->type)
1067 return -EINVAL;
1068 break;
1069 }
1070
1071 neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1072 err = PTR_ERR(neigh);
1073 if (!IS_ERR(neigh)) {
1074 unsigned int state = NUD_STALE;
1075 if (r->arp_flags & ATF_PERM)
1076 state = NUD_PERMANENT;
1077 err = neigh_update(neigh, (r->arp_flags & ATF_COM) ?
1078 r->arp_ha.sa_data : NULL, state,
1079 NEIGH_UPDATE_F_OVERRIDE |
1080 NEIGH_UPDATE_F_ADMIN);
1081 neigh_release(neigh);
1082 }
1083 return err;
1084}
1085
1086static unsigned int arp_state_to_flags(struct neighbour *neigh)
1087{
1088 if (neigh->nud_state&NUD_PERMANENT)
1089 return ATF_PERM | ATF_COM;
1090 else if (neigh->nud_state&NUD_VALID)
1091 return ATF_COM;
1092 else
1093 return 0;
1094}
1095
1096/*
1097 * Get an ARP cache entry.
1098 */
1099
1100static int arp_req_get(struct arpreq *r, struct net_device *dev)
1101{
1102 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1103 struct neighbour *neigh;
1104 int err = -ENXIO;
1105
1106 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1107 if (neigh) {
1108 read_lock_bh(&neigh->lock);
1109 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1110 r->arp_flags = arp_state_to_flags(neigh);
1111 read_unlock_bh(&neigh->lock);
1112 r->arp_ha.sa_family = dev->type;
1113 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1114 neigh_release(neigh);
1115 err = 0;
1116 }
1117 return err;
1118}
1119
1120static int arp_invalidate(struct net_device *dev, __be32 ip)
1121{
1122 struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
1123 int err = -ENXIO;
1124
1125 if (neigh) {
1126 if (neigh->nud_state & ~NUD_NOARP)
1127 err = neigh_update(neigh, NULL, NUD_FAILED,
1128 NEIGH_UPDATE_F_OVERRIDE|
1129 NEIGH_UPDATE_F_ADMIN);
1130 neigh_release(neigh);
1131 }
1132
1133 return err;
1134}
1135
1136static int arp_req_delete_public(struct net *net, struct arpreq *r,
1137 struct net_device *dev)
1138{
1139 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1140 __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1141
1142 if (mask == htonl(0xFFFFFFFF))
1143 return pneigh_delete(&arp_tbl, net, &ip, dev);
1144
1145 if (mask)
1146 return -EINVAL;
1147
1148 return arp_req_set_proxy(net, dev, 0);
1149}
1150
1151static int arp_req_delete(struct net *net, struct arpreq *r,
1152 struct net_device *dev)
1153{
1154 __be32 ip;
1155
1156 if (r->arp_flags & ATF_PUBL)
1157 return arp_req_delete_public(net, r, dev);
1158
1159 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1160 if (dev == NULL) {
1161 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1162 if (IS_ERR(rt))
1163 return PTR_ERR(rt);
1164 dev = rt->dst.dev;
1165 ip_rt_put(rt);
1166 if (!dev)
1167 return -EINVAL;
1168 }
1169 return arp_invalidate(dev, ip);
1170}
1171
1172/*
1173 * Handle an ARP layer I/O control request.
1174 */
1175
1176int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
1177{
1178 int err;
1179 struct arpreq r;
1180 struct net_device *dev = NULL;
1181
1182 switch (cmd) {
1183 case SIOCDARP:
1184 case SIOCSARP:
1185 if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
1186 return -EPERM;
1187 case SIOCGARP:
1188 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1189 if (err)
1190 return -EFAULT;
1191 break;
1192 default:
1193 return -EINVAL;
1194 }
1195
1196 if (r.arp_pa.sa_family != AF_INET)
1197 return -EPFNOSUPPORT;
1198
1199 if (!(r.arp_flags & ATF_PUBL) &&
1200 (r.arp_flags & (ATF_NETMASK | ATF_DONTPUB)))
1201 return -EINVAL;
1202 if (!(r.arp_flags & ATF_NETMASK))
1203 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1204 htonl(0xFFFFFFFFUL);
1205 rtnl_lock();
1206 if (r.arp_dev[0]) {
1207 err = -ENODEV;
1208 dev = __dev_get_by_name(net, r.arp_dev);
1209 if (dev == NULL)
1210 goto out;
1211
1212 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1213 if (!r.arp_ha.sa_family)
1214 r.arp_ha.sa_family = dev->type;
1215 err = -EINVAL;
1216 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1217 goto out;
1218 } else if (cmd == SIOCGARP) {
1219 err = -ENODEV;
1220 goto out;
1221 }
1222
1223 switch (cmd) {
1224 case SIOCDARP:
1225 err = arp_req_delete(net, &r, dev);
1226 break;
1227 case SIOCSARP:
1228 err = arp_req_set(net, &r, dev);
1229 break;
1230 case SIOCGARP:
1231 err = arp_req_get(&r, dev);
1232 break;
1233 }
1234out:
1235 rtnl_unlock();
1236 if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r)))
1237 err = -EFAULT;
1238 return err;
1239}
1240
1241static int arp_netdev_event(struct notifier_block *this, unsigned long event,
1242 void *ptr)
1243{
1244 struct net_device *dev = netdev_notifier_info_to_dev(ptr);
1245 struct netdev_notifier_change_info *change_info;
1246
1247 switch (event) {
1248 case NETDEV_CHANGEADDR:
1249 neigh_changeaddr(&arp_tbl, dev);
1250 rt_cache_flush(dev_net(dev));
1251 break;
1252 case NETDEV_CHANGE:
1253 change_info = ptr;
1254 if (change_info->flags_changed & IFF_NOARP)
1255 neigh_changeaddr(&arp_tbl, dev);
1256 break;
1257 default:
1258 break;
1259 }
1260
1261 return NOTIFY_DONE;
1262}
1263
1264static struct notifier_block arp_netdev_notifier = {
1265 .notifier_call = arp_netdev_event,
1266};
1267
1268/* Note, that it is not on notifier chain.
1269 It is necessary, that this routine was called after route cache will be
1270 flushed.
1271 */
1272void arp_ifdown(struct net_device *dev)
1273{
1274 neigh_ifdown(&arp_tbl, dev);
1275}
1276
1277
1278/*
1279 * Called once on startup.
1280 */
1281
1282static struct packet_type arp_packet_type __read_mostly = {
1283 .type = cpu_to_be16(ETH_P_ARP),
1284 .func = arp_rcv,
1285};
1286
1287static int arp_proc_init(void);
1288
1289void __init arp_init(void)
1290{
1291 neigh_table_init(&arp_tbl);
1292
1293 dev_add_pack(&arp_packet_type);
1294 arp_proc_init();
1295#ifdef CONFIG_SYSCTL
1296 neigh_sysctl_register(NULL, &arp_tbl.parms, NULL);
1297#endif
1298 register_netdevice_notifier(&arp_netdev_notifier);
1299}
1300
1301#ifdef CONFIG_PROC_FS
1302#if IS_ENABLED(CONFIG_AX25)
1303
1304/* ------------------------------------------------------------------------ */
1305/*
1306 * ax25 -> ASCII conversion
1307 */
1308static char *ax2asc2(ax25_address *a, char *buf)
1309{
1310 char c, *s;
1311 int n;
1312
1313 for (n = 0, s = buf; n < 6; n++) {
1314 c = (a->ax25_call[n] >> 1) & 0x7F;
1315
1316 if (c != ' ')
1317 *s++ = c;
1318 }
1319
1320 *s++ = '-';
1321 n = (a->ax25_call[6] >> 1) & 0x0F;
1322 if (n > 9) {
1323 *s++ = '1';
1324 n -= 10;
1325 }
1326
1327 *s++ = n + '0';
1328 *s++ = '\0';
1329
1330 if (*buf == '\0' || *buf == '-')
1331 return "*";
1332
1333 return buf;
1334}
1335#endif /* CONFIG_AX25 */
1336
1337#define HBUFFERLEN 30
1338
1339static void arp_format_neigh_entry(struct seq_file *seq,
1340 struct neighbour *n)
1341{
1342 char hbuffer[HBUFFERLEN];
1343 int k, j;
1344 char tbuf[16];
1345 struct net_device *dev = n->dev;
1346 int hatype = dev->type;
1347
1348 read_lock(&n->lock);
1349 /* Convert hardware address to XX:XX:XX:XX ... form. */
1350#if IS_ENABLED(CONFIG_AX25)
1351 if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1352 ax2asc2((ax25_address *)n->ha, hbuffer);
1353 else {
1354#endif
1355 for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1356 hbuffer[k++] = hex_asc_hi(n->ha[j]);
1357 hbuffer[k++] = hex_asc_lo(n->ha[j]);
1358 hbuffer[k++] = ':';
1359 }
1360 if (k != 0)
1361 --k;
1362 hbuffer[k] = 0;
1363#if IS_ENABLED(CONFIG_AX25)
1364 }
1365#endif
1366 sprintf(tbuf, "%pI4", n->primary_key);
1367 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1368 tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1369 read_unlock(&n->lock);
1370}
1371
1372static void arp_format_pneigh_entry(struct seq_file *seq,
1373 struct pneigh_entry *n)
1374{
1375 struct net_device *dev = n->dev;
1376 int hatype = dev ? dev->type : 0;
1377 char tbuf[16];
1378
1379 sprintf(tbuf, "%pI4", n->key);
1380 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1381 tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1382 dev ? dev->name : "*");
1383}
1384
1385static int arp_seq_show(struct seq_file *seq, void *v)
1386{
1387 if (v == SEQ_START_TOKEN) {
1388 seq_puts(seq, "IP address HW type Flags "
1389 "HW address Mask Device\n");
1390 } else {
1391 struct neigh_seq_state *state = seq->private;
1392
1393 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1394 arp_format_pneigh_entry(seq, v);
1395 else
1396 arp_format_neigh_entry(seq, v);
1397 }
1398
1399 return 0;
1400}
1401
1402static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1403{
1404 /* Don't want to confuse "arp -a" w/ magic entries,
1405 * so we tell the generic iterator to skip NUD_NOARP.
1406 */
1407 return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1408}
1409
1410/* ------------------------------------------------------------------------ */
1411
1412static const struct seq_operations arp_seq_ops = {
1413 .start = arp_seq_start,
1414 .next = neigh_seq_next,
1415 .stop = neigh_seq_stop,
1416 .show = arp_seq_show,
1417};
1418
1419static int arp_seq_open(struct inode *inode, struct file *file)
1420{
1421 return seq_open_net(inode, file, &arp_seq_ops,
1422 sizeof(struct neigh_seq_state));
1423}
1424
1425static const struct file_operations arp_seq_fops = {
1426 .owner = THIS_MODULE,
1427 .open = arp_seq_open,
1428 .read = seq_read,
1429 .llseek = seq_lseek,
1430 .release = seq_release_net,
1431};
1432
1433
1434static int __net_init arp_net_init(struct net *net)
1435{
1436 if (!proc_create("arp", S_IRUGO, net->proc_net, &arp_seq_fops))
1437 return -ENOMEM;
1438 return 0;
1439}
1440
1441static void __net_exit arp_net_exit(struct net *net)
1442{
1443 remove_proc_entry("arp", net->proc_net);
1444}
1445
1446static struct pernet_operations arp_net_ops = {
1447 .init = arp_net_init,
1448 .exit = arp_net_exit,
1449};
1450
1451static int __init arp_proc_init(void)
1452{
1453 return register_pernet_subsys(&arp_net_ops);
1454}
1455
1456#else /* CONFIG_PROC_FS */
1457
1458static int __init arp_proc_init(void)
1459{
1460 return 0;
1461}
1462
1463#endif /* CONFIG_PROC_FS */
1/* linux/net/ipv4/arp.c
2 *
3 * Copyright (C) 1994 by Florian La Roche
4 *
5 * This module implements the Address Resolution Protocol ARP (RFC 826),
6 * which is used to convert IP addresses (or in the future maybe other
7 * high-level addresses) into a low-level hardware address (like an Ethernet
8 * address).
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 *
15 * Fixes:
16 * Alan Cox : Removed the Ethernet assumptions in
17 * Florian's code
18 * Alan Cox : Fixed some small errors in the ARP
19 * logic
20 * Alan Cox : Allow >4K in /proc
21 * Alan Cox : Make ARP add its own protocol entry
22 * Ross Martin : Rewrote arp_rcv() and arp_get_info()
23 * Stephen Henson : Add AX25 support to arp_get_info()
24 * Alan Cox : Drop data when a device is downed.
25 * Alan Cox : Use init_timer().
26 * Alan Cox : Double lock fixes.
27 * Martin Seine : Move the arphdr structure
28 * to if_arp.h for compatibility.
29 * with BSD based programs.
30 * Andrew Tridgell : Added ARP netmask code and
31 * re-arranged proxy handling.
32 * Alan Cox : Changed to use notifiers.
33 * Niibe Yutaka : Reply for this device or proxies only.
34 * Alan Cox : Don't proxy across hardware types!
35 * Jonathan Naylor : Added support for NET/ROM.
36 * Mike Shaver : RFC1122 checks.
37 * Jonathan Naylor : Only lookup the hardware address for
38 * the correct hardware type.
39 * Germano Caronni : Assorted subtle races.
40 * Craig Schlenter : Don't modify permanent entry
41 * during arp_rcv.
42 * Russ Nelson : Tidied up a few bits.
43 * Alexey Kuznetsov: Major changes to caching and behaviour,
44 * eg intelligent arp probing and
45 * generation
46 * of host down events.
47 * Alan Cox : Missing unlock in device events.
48 * Eckes : ARP ioctl control errors.
49 * Alexey Kuznetsov: Arp free fix.
50 * Manuel Rodriguez: Gratuitous ARP.
51 * Jonathan Layes : Added arpd support through kerneld
52 * message queue (960314)
53 * Mike Shaver : /proc/sys/net/ipv4/arp_* support
54 * Mike McLagan : Routing by source
55 * Stuart Cheshire : Metricom and grat arp fixes
56 * *** FOR 2.1 clean this up ***
57 * Lawrence V. Stefani: (08/12/96) Added FDDI support.
58 * Alan Cox : Took the AP1000 nasty FDDI hack and
59 * folded into the mainstream FDDI code.
60 * Ack spit, Linus how did you allow that
61 * one in...
62 * Jes Sorensen : Make FDDI work again in 2.1.x and
63 * clean up the APFDDI & gen. FDDI bits.
64 * Alexey Kuznetsov: new arp state machine;
65 * now it is in net/core/neighbour.c.
66 * Krzysztof Halasa: Added Frame Relay ARP support.
67 * Arnaldo C. Melo : convert /proc/net/arp to seq_file
68 * Shmulik Hen: Split arp_send to arp_create and
69 * arp_xmit so intermediate drivers like
70 * bonding can change the skb before
71 * sending (e.g. insert 8021q tag).
72 * Harald Welte : convert to make use of jenkins hash
73 * Jesper D. Brouer: Proxy ARP PVLAN RFC 3069 support.
74 */
75
76#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
77
78#include <linux/module.h>
79#include <linux/types.h>
80#include <linux/string.h>
81#include <linux/kernel.h>
82#include <linux/capability.h>
83#include <linux/socket.h>
84#include <linux/sockios.h>
85#include <linux/errno.h>
86#include <linux/in.h>
87#include <linux/mm.h>
88#include <linux/inet.h>
89#include <linux/inetdevice.h>
90#include <linux/netdevice.h>
91#include <linux/etherdevice.h>
92#include <linux/fddidevice.h>
93#include <linux/if_arp.h>
94#include <linux/skbuff.h>
95#include <linux/proc_fs.h>
96#include <linux/seq_file.h>
97#include <linux/stat.h>
98#include <linux/init.h>
99#include <linux/net.h>
100#include <linux/rcupdate.h>
101#include <linux/slab.h>
102#ifdef CONFIG_SYSCTL
103#include <linux/sysctl.h>
104#endif
105
106#include <net/net_namespace.h>
107#include <net/ip.h>
108#include <net/icmp.h>
109#include <net/route.h>
110#include <net/protocol.h>
111#include <net/tcp.h>
112#include <net/sock.h>
113#include <net/arp.h>
114#include <net/ax25.h>
115#include <net/netrom.h>
116#include <net/dst_metadata.h>
117#include <net/ip_tunnels.h>
118
119#include <linux/uaccess.h>
120
121#include <linux/netfilter_arp.h>
122
123/*
124 * Interface to generic neighbour cache.
125 */
126static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 *hash_rnd);
127static bool arp_key_eq(const struct neighbour *n, const void *pkey);
128static int arp_constructor(struct neighbour *neigh);
129static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
130static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
131static void parp_redo(struct sk_buff *skb);
132
133static const struct neigh_ops arp_generic_ops = {
134 .family = AF_INET,
135 .solicit = arp_solicit,
136 .error_report = arp_error_report,
137 .output = neigh_resolve_output,
138 .connected_output = neigh_connected_output,
139};
140
141static const struct neigh_ops arp_hh_ops = {
142 .family = AF_INET,
143 .solicit = arp_solicit,
144 .error_report = arp_error_report,
145 .output = neigh_resolve_output,
146 .connected_output = neigh_resolve_output,
147};
148
149static const struct neigh_ops arp_direct_ops = {
150 .family = AF_INET,
151 .output = neigh_direct_output,
152 .connected_output = neigh_direct_output,
153};
154
155struct neigh_table arp_tbl = {
156 .family = AF_INET,
157 .key_len = 4,
158 .protocol = cpu_to_be16(ETH_P_IP),
159 .hash = arp_hash,
160 .key_eq = arp_key_eq,
161 .constructor = arp_constructor,
162 .proxy_redo = parp_redo,
163 .id = "arp_cache",
164 .parms = {
165 .tbl = &arp_tbl,
166 .reachable_time = 30 * HZ,
167 .data = {
168 [NEIGH_VAR_MCAST_PROBES] = 3,
169 [NEIGH_VAR_UCAST_PROBES] = 3,
170 [NEIGH_VAR_RETRANS_TIME] = 1 * HZ,
171 [NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ,
172 [NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ,
173 [NEIGH_VAR_GC_STALETIME] = 60 * HZ,
174 [NEIGH_VAR_QUEUE_LEN_BYTES] = 64 * 1024,
175 [NEIGH_VAR_PROXY_QLEN] = 64,
176 [NEIGH_VAR_ANYCAST_DELAY] = 1 * HZ,
177 [NEIGH_VAR_PROXY_DELAY] = (8 * HZ) / 10,
178 [NEIGH_VAR_LOCKTIME] = 1 * HZ,
179 },
180 },
181 .gc_interval = 30 * HZ,
182 .gc_thresh1 = 128,
183 .gc_thresh2 = 512,
184 .gc_thresh3 = 1024,
185};
186EXPORT_SYMBOL(arp_tbl);
187
188int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
189{
190 switch (dev->type) {
191 case ARPHRD_ETHER:
192 case ARPHRD_FDDI:
193 case ARPHRD_IEEE802:
194 ip_eth_mc_map(addr, haddr);
195 return 0;
196 case ARPHRD_INFINIBAND:
197 ip_ib_mc_map(addr, dev->broadcast, haddr);
198 return 0;
199 case ARPHRD_IPGRE:
200 ip_ipgre_mc_map(addr, dev->broadcast, haddr);
201 return 0;
202 default:
203 if (dir) {
204 memcpy(haddr, dev->broadcast, dev->addr_len);
205 return 0;
206 }
207 }
208 return -EINVAL;
209}
210
211
212static u32 arp_hash(const void *pkey,
213 const struct net_device *dev,
214 __u32 *hash_rnd)
215{
216 return arp_hashfn(pkey, dev, hash_rnd);
217}
218
219static bool arp_key_eq(const struct neighbour *neigh, const void *pkey)
220{
221 return neigh_key_eq32(neigh, pkey);
222}
223
224static int arp_constructor(struct neighbour *neigh)
225{
226 __be32 addr = *(__be32 *)neigh->primary_key;
227 struct net_device *dev = neigh->dev;
228 struct in_device *in_dev;
229 struct neigh_parms *parms;
230
231 rcu_read_lock();
232 in_dev = __in_dev_get_rcu(dev);
233 if (!in_dev) {
234 rcu_read_unlock();
235 return -EINVAL;
236 }
237
238 neigh->type = inet_addr_type_dev_table(dev_net(dev), dev, addr);
239
240 parms = in_dev->arp_parms;
241 __neigh_parms_put(neigh->parms);
242 neigh->parms = neigh_parms_clone(parms);
243 rcu_read_unlock();
244
245 if (!dev->header_ops) {
246 neigh->nud_state = NUD_NOARP;
247 neigh->ops = &arp_direct_ops;
248 neigh->output = neigh_direct_output;
249 } else {
250 /* Good devices (checked by reading texts, but only Ethernet is
251 tested)
252
253 ARPHRD_ETHER: (ethernet, apfddi)
254 ARPHRD_FDDI: (fddi)
255 ARPHRD_IEEE802: (tr)
256 ARPHRD_METRICOM: (strip)
257 ARPHRD_ARCNET:
258 etc. etc. etc.
259
260 ARPHRD_IPDDP will also work, if author repairs it.
261 I did not it, because this driver does not work even
262 in old paradigm.
263 */
264
265 if (neigh->type == RTN_MULTICAST) {
266 neigh->nud_state = NUD_NOARP;
267 arp_mc_map(addr, neigh->ha, dev, 1);
268 } else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) {
269 neigh->nud_state = NUD_NOARP;
270 memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
271 } else if (neigh->type == RTN_BROADCAST ||
272 (dev->flags & IFF_POINTOPOINT)) {
273 neigh->nud_state = NUD_NOARP;
274 memcpy(neigh->ha, dev->broadcast, dev->addr_len);
275 }
276
277 if (dev->header_ops->cache)
278 neigh->ops = &arp_hh_ops;
279 else
280 neigh->ops = &arp_generic_ops;
281
282 if (neigh->nud_state & NUD_VALID)
283 neigh->output = neigh->ops->connected_output;
284 else
285 neigh->output = neigh->ops->output;
286 }
287 return 0;
288}
289
290static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
291{
292 dst_link_failure(skb);
293 kfree_skb(skb);
294}
295
296/* Create and send an arp packet. */
297static void arp_send_dst(int type, int ptype, __be32 dest_ip,
298 struct net_device *dev, __be32 src_ip,
299 const unsigned char *dest_hw,
300 const unsigned char *src_hw,
301 const unsigned char *target_hw,
302 struct dst_entry *dst)
303{
304 struct sk_buff *skb;
305
306 /* arp on this interface. */
307 if (dev->flags & IFF_NOARP)
308 return;
309
310 skb = arp_create(type, ptype, dest_ip, dev, src_ip,
311 dest_hw, src_hw, target_hw);
312 if (!skb)
313 return;
314
315 skb_dst_set(skb, dst_clone(dst));
316 arp_xmit(skb);
317}
318
319void arp_send(int type, int ptype, __be32 dest_ip,
320 struct net_device *dev, __be32 src_ip,
321 const unsigned char *dest_hw, const unsigned char *src_hw,
322 const unsigned char *target_hw)
323{
324 arp_send_dst(type, ptype, dest_ip, dev, src_ip, dest_hw, src_hw,
325 target_hw, NULL);
326}
327EXPORT_SYMBOL(arp_send);
328
329static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
330{
331 __be32 saddr = 0;
332 u8 dst_ha[MAX_ADDR_LEN], *dst_hw = NULL;
333 struct net_device *dev = neigh->dev;
334 __be32 target = *(__be32 *)neigh->primary_key;
335 int probes = atomic_read(&neigh->probes);
336 struct in_device *in_dev;
337 struct dst_entry *dst = NULL;
338
339 rcu_read_lock();
340 in_dev = __in_dev_get_rcu(dev);
341 if (!in_dev) {
342 rcu_read_unlock();
343 return;
344 }
345 switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
346 default:
347 case 0: /* By default announce any local IP */
348 if (skb && inet_addr_type_dev_table(dev_net(dev), dev,
349 ip_hdr(skb)->saddr) == RTN_LOCAL)
350 saddr = ip_hdr(skb)->saddr;
351 break;
352 case 1: /* Restrict announcements of saddr in same subnet */
353 if (!skb)
354 break;
355 saddr = ip_hdr(skb)->saddr;
356 if (inet_addr_type_dev_table(dev_net(dev), dev,
357 saddr) == RTN_LOCAL) {
358 /* saddr should be known to target */
359 if (inet_addr_onlink(in_dev, target, saddr))
360 break;
361 }
362 saddr = 0;
363 break;
364 case 2: /* Avoid secondary IPs, get a primary/preferred one */
365 break;
366 }
367 rcu_read_unlock();
368
369 if (!saddr)
370 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
371
372 probes -= NEIGH_VAR(neigh->parms, UCAST_PROBES);
373 if (probes < 0) {
374 if (!(neigh->nud_state & NUD_VALID))
375 pr_debug("trying to ucast probe in NUD_INVALID\n");
376 neigh_ha_snapshot(dst_ha, neigh, dev);
377 dst_hw = dst_ha;
378 } else {
379 probes -= NEIGH_VAR(neigh->parms, APP_PROBES);
380 if (probes < 0) {
381 neigh_app_ns(neigh);
382 return;
383 }
384 }
385
386 if (skb && !(dev->priv_flags & IFF_XMIT_DST_RELEASE))
387 dst = skb_dst(skb);
388 arp_send_dst(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
389 dst_hw, dev->dev_addr, NULL, dst);
390}
391
392static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
393{
394 struct net *net = dev_net(in_dev->dev);
395 int scope;
396
397 switch (IN_DEV_ARP_IGNORE(in_dev)) {
398 case 0: /* Reply, the tip is already validated */
399 return 0;
400 case 1: /* Reply only if tip is configured on the incoming interface */
401 sip = 0;
402 scope = RT_SCOPE_HOST;
403 break;
404 case 2: /*
405 * Reply only if tip is configured on the incoming interface
406 * and is in same subnet as sip
407 */
408 scope = RT_SCOPE_HOST;
409 break;
410 case 3: /* Do not reply for scope host addresses */
411 sip = 0;
412 scope = RT_SCOPE_LINK;
413 in_dev = NULL;
414 break;
415 case 4: /* Reserved */
416 case 5:
417 case 6:
418 case 7:
419 return 0;
420 case 8: /* Do not reply */
421 return 1;
422 default:
423 return 0;
424 }
425 return !inet_confirm_addr(net, in_dev, sip, tip, scope);
426}
427
428static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
429{
430 struct rtable *rt;
431 int flag = 0;
432 /*unsigned long now; */
433 struct net *net = dev_net(dev);
434
435 rt = ip_route_output(net, sip, tip, 0, 0);
436 if (IS_ERR(rt))
437 return 1;
438 if (rt->dst.dev != dev) {
439 NET_INC_STATS_BH(net, LINUX_MIB_ARPFILTER);
440 flag = 1;
441 }
442 ip_rt_put(rt);
443 return flag;
444}
445
446/*
447 * Check if we can use proxy ARP for this path
448 */
449static inline int arp_fwd_proxy(struct in_device *in_dev,
450 struct net_device *dev, struct rtable *rt)
451{
452 struct in_device *out_dev;
453 int imi, omi = -1;
454
455 if (rt->dst.dev == dev)
456 return 0;
457
458 if (!IN_DEV_PROXY_ARP(in_dev))
459 return 0;
460 imi = IN_DEV_MEDIUM_ID(in_dev);
461 if (imi == 0)
462 return 1;
463 if (imi == -1)
464 return 0;
465
466 /* place to check for proxy_arp for routes */
467
468 out_dev = __in_dev_get_rcu(rt->dst.dev);
469 if (out_dev)
470 omi = IN_DEV_MEDIUM_ID(out_dev);
471
472 return omi != imi && omi != -1;
473}
474
475/*
476 * Check for RFC3069 proxy arp private VLAN (allow to send back to same dev)
477 *
478 * RFC3069 supports proxy arp replies back to the same interface. This
479 * is done to support (ethernet) switch features, like RFC 3069, where
480 * the individual ports are not allowed to communicate with each
481 * other, BUT they are allowed to talk to the upstream router. As
482 * described in RFC 3069, it is possible to allow these hosts to
483 * communicate through the upstream router, by proxy_arp'ing.
484 *
485 * RFC 3069: "VLAN Aggregation for Efficient IP Address Allocation"
486 *
487 * This technology is known by different names:
488 * In RFC 3069 it is called VLAN Aggregation.
489 * Cisco and Allied Telesyn call it Private VLAN.
490 * Hewlett-Packard call it Source-Port filtering or port-isolation.
491 * Ericsson call it MAC-Forced Forwarding (RFC Draft).
492 *
493 */
494static inline int arp_fwd_pvlan(struct in_device *in_dev,
495 struct net_device *dev, struct rtable *rt,
496 __be32 sip, __be32 tip)
497{
498 /* Private VLAN is only concerned about the same ethernet segment */
499 if (rt->dst.dev != dev)
500 return 0;
501
502 /* Don't reply on self probes (often done by windowz boxes)*/
503 if (sip == tip)
504 return 0;
505
506 if (IN_DEV_PROXY_ARP_PVLAN(in_dev))
507 return 1;
508 else
509 return 0;
510}
511
512/*
513 * Interface to link layer: send routine and receive handler.
514 */
515
516/*
517 * Create an arp packet. If dest_hw is not set, we create a broadcast
518 * message.
519 */
520struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
521 struct net_device *dev, __be32 src_ip,
522 const unsigned char *dest_hw,
523 const unsigned char *src_hw,
524 const unsigned char *target_hw)
525{
526 struct sk_buff *skb;
527 struct arphdr *arp;
528 unsigned char *arp_ptr;
529 int hlen = LL_RESERVED_SPACE(dev);
530 int tlen = dev->needed_tailroom;
531
532 /*
533 * Allocate a buffer
534 */
535
536 skb = alloc_skb(arp_hdr_len(dev) + hlen + tlen, GFP_ATOMIC);
537 if (!skb)
538 return NULL;
539
540 skb_reserve(skb, hlen);
541 skb_reset_network_header(skb);
542 arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev));
543 skb->dev = dev;
544 skb->protocol = htons(ETH_P_ARP);
545 if (!src_hw)
546 src_hw = dev->dev_addr;
547 if (!dest_hw)
548 dest_hw = dev->broadcast;
549
550 /*
551 * Fill the device header for the ARP frame
552 */
553 if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
554 goto out;
555
556 /*
557 * Fill out the arp protocol part.
558 *
559 * The arp hardware type should match the device type, except for FDDI,
560 * which (according to RFC 1390) should always equal 1 (Ethernet).
561 */
562 /*
563 * Exceptions everywhere. AX.25 uses the AX.25 PID value not the
564 * DIX code for the protocol. Make these device structure fields.
565 */
566 switch (dev->type) {
567 default:
568 arp->ar_hrd = htons(dev->type);
569 arp->ar_pro = htons(ETH_P_IP);
570 break;
571
572#if IS_ENABLED(CONFIG_AX25)
573 case ARPHRD_AX25:
574 arp->ar_hrd = htons(ARPHRD_AX25);
575 arp->ar_pro = htons(AX25_P_IP);
576 break;
577
578#if IS_ENABLED(CONFIG_NETROM)
579 case ARPHRD_NETROM:
580 arp->ar_hrd = htons(ARPHRD_NETROM);
581 arp->ar_pro = htons(AX25_P_IP);
582 break;
583#endif
584#endif
585
586#if IS_ENABLED(CONFIG_FDDI)
587 case ARPHRD_FDDI:
588 arp->ar_hrd = htons(ARPHRD_ETHER);
589 arp->ar_pro = htons(ETH_P_IP);
590 break;
591#endif
592 }
593
594 arp->ar_hln = dev->addr_len;
595 arp->ar_pln = 4;
596 arp->ar_op = htons(type);
597
598 arp_ptr = (unsigned char *)(arp + 1);
599
600 memcpy(arp_ptr, src_hw, dev->addr_len);
601 arp_ptr += dev->addr_len;
602 memcpy(arp_ptr, &src_ip, 4);
603 arp_ptr += 4;
604
605 switch (dev->type) {
606#if IS_ENABLED(CONFIG_FIREWIRE_NET)
607 case ARPHRD_IEEE1394:
608 break;
609#endif
610 default:
611 if (target_hw)
612 memcpy(arp_ptr, target_hw, dev->addr_len);
613 else
614 memset(arp_ptr, 0, dev->addr_len);
615 arp_ptr += dev->addr_len;
616 }
617 memcpy(arp_ptr, &dest_ip, 4);
618
619 return skb;
620
621out:
622 kfree_skb(skb);
623 return NULL;
624}
625EXPORT_SYMBOL(arp_create);
626
627static int arp_xmit_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
628{
629 return dev_queue_xmit(skb);
630}
631
632/*
633 * Send an arp packet.
634 */
635void arp_xmit(struct sk_buff *skb)
636{
637 /* Send it off, maybe filter it using firewalling first. */
638 NF_HOOK(NFPROTO_ARP, NF_ARP_OUT,
639 dev_net(skb->dev), NULL, skb, NULL, skb->dev,
640 arp_xmit_finish);
641}
642EXPORT_SYMBOL(arp_xmit);
643
644/*
645 * Process an arp request.
646 */
647
648static int arp_process(struct net *net, struct sock *sk, struct sk_buff *skb)
649{
650 struct net_device *dev = skb->dev;
651 struct in_device *in_dev = __in_dev_get_rcu(dev);
652 struct arphdr *arp;
653 unsigned char *arp_ptr;
654 struct rtable *rt;
655 unsigned char *sha;
656 __be32 sip, tip;
657 u16 dev_type = dev->type;
658 int addr_type;
659 struct neighbour *n;
660 struct dst_entry *reply_dst = NULL;
661 bool is_garp = false;
662
663 /* arp_rcv below verifies the ARP header and verifies the device
664 * is ARP'able.
665 */
666
667 if (!in_dev)
668 goto out_free_skb;
669
670 arp = arp_hdr(skb);
671
672 switch (dev_type) {
673 default:
674 if (arp->ar_pro != htons(ETH_P_IP) ||
675 htons(dev_type) != arp->ar_hrd)
676 goto out_free_skb;
677 break;
678 case ARPHRD_ETHER:
679 case ARPHRD_FDDI:
680 case ARPHRD_IEEE802:
681 /*
682 * ETHERNET, and Fibre Channel (which are IEEE 802
683 * devices, according to RFC 2625) devices will accept ARP
684 * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
685 * This is the case also of FDDI, where the RFC 1390 says that
686 * FDDI devices should accept ARP hardware of (1) Ethernet,
687 * however, to be more robust, we'll accept both 1 (Ethernet)
688 * or 6 (IEEE 802.2)
689 */
690 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
691 arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
692 arp->ar_pro != htons(ETH_P_IP))
693 goto out_free_skb;
694 break;
695 case ARPHRD_AX25:
696 if (arp->ar_pro != htons(AX25_P_IP) ||
697 arp->ar_hrd != htons(ARPHRD_AX25))
698 goto out_free_skb;
699 break;
700 case ARPHRD_NETROM:
701 if (arp->ar_pro != htons(AX25_P_IP) ||
702 arp->ar_hrd != htons(ARPHRD_NETROM))
703 goto out_free_skb;
704 break;
705 }
706
707 /* Understand only these message types */
708
709 if (arp->ar_op != htons(ARPOP_REPLY) &&
710 arp->ar_op != htons(ARPOP_REQUEST))
711 goto out_free_skb;
712
713/*
714 * Extract fields
715 */
716 arp_ptr = (unsigned char *)(arp + 1);
717 sha = arp_ptr;
718 arp_ptr += dev->addr_len;
719 memcpy(&sip, arp_ptr, 4);
720 arp_ptr += 4;
721 switch (dev_type) {
722#if IS_ENABLED(CONFIG_FIREWIRE_NET)
723 case ARPHRD_IEEE1394:
724 break;
725#endif
726 default:
727 arp_ptr += dev->addr_len;
728 }
729 memcpy(&tip, arp_ptr, 4);
730/*
731 * Check for bad requests for 127.x.x.x and requests for multicast
732 * addresses. If this is one such, delete it.
733 */
734 if (ipv4_is_multicast(tip) ||
735 (!IN_DEV_ROUTE_LOCALNET(in_dev) && ipv4_is_loopback(tip)))
736 goto out_free_skb;
737
738 /*
739 * For some 802.11 wireless deployments (and possibly other networks),
740 * there will be an ARP proxy and gratuitous ARP frames are attacks
741 * and thus should not be accepted.
742 */
743 if (sip == tip && IN_DEV_ORCONF(in_dev, DROP_GRATUITOUS_ARP))
744 goto out_free_skb;
745
746/*
747 * Special case: We must set Frame Relay source Q.922 address
748 */
749 if (dev_type == ARPHRD_DLCI)
750 sha = dev->broadcast;
751
752/*
753 * Process entry. The idea here is we want to send a reply if it is a
754 * request for us or if it is a request for someone else that we hold
755 * a proxy for. We want to add an entry to our cache if it is a reply
756 * to us or if it is a request for our address.
757 * (The assumption for this last is that if someone is requesting our
758 * address, they are probably intending to talk to us, so it saves time
759 * if we cache their address. Their address is also probably not in
760 * our cache, since ours is not in their cache.)
761 *
762 * Putting this another way, we only care about replies if they are to
763 * us, in which case we add them to the cache. For requests, we care
764 * about those for us and those for our proxies. We reply to both,
765 * and in the case of requests for us we add the requester to the arp
766 * cache.
767 */
768
769 if (arp->ar_op == htons(ARPOP_REQUEST) && skb_metadata_dst(skb))
770 reply_dst = (struct dst_entry *)
771 iptunnel_metadata_reply(skb_metadata_dst(skb),
772 GFP_ATOMIC);
773
774 /* Special case: IPv4 duplicate address detection packet (RFC2131) */
775 if (sip == 0) {
776 if (arp->ar_op == htons(ARPOP_REQUEST) &&
777 inet_addr_type_dev_table(net, dev, tip) == RTN_LOCAL &&
778 !arp_ignore(in_dev, sip, tip))
779 arp_send_dst(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip,
780 sha, dev->dev_addr, sha, reply_dst);
781 goto out_consume_skb;
782 }
783
784 if (arp->ar_op == htons(ARPOP_REQUEST) &&
785 ip_route_input_noref(skb, tip, sip, 0, dev) == 0) {
786
787 rt = skb_rtable(skb);
788 addr_type = rt->rt_type;
789
790 if (addr_type == RTN_LOCAL) {
791 int dont_send;
792
793 dont_send = arp_ignore(in_dev, sip, tip);
794 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
795 dont_send = arp_filter(sip, tip, dev);
796 if (!dont_send) {
797 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
798 if (n) {
799 arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
800 sip, dev, tip, sha,
801 dev->dev_addr, sha,
802 reply_dst);
803 neigh_release(n);
804 }
805 }
806 goto out_consume_skb;
807 } else if (IN_DEV_FORWARD(in_dev)) {
808 if (addr_type == RTN_UNICAST &&
809 (arp_fwd_proxy(in_dev, dev, rt) ||
810 arp_fwd_pvlan(in_dev, dev, rt, sip, tip) ||
811 (rt->dst.dev != dev &&
812 pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) {
813 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
814 if (n)
815 neigh_release(n);
816
817 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
818 skb->pkt_type == PACKET_HOST ||
819 NEIGH_VAR(in_dev->arp_parms, PROXY_DELAY) == 0) {
820 arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
821 sip, dev, tip, sha,
822 dev->dev_addr, sha,
823 reply_dst);
824 } else {
825 pneigh_enqueue(&arp_tbl,
826 in_dev->arp_parms, skb);
827 goto out_free_dst;
828 }
829 goto out_consume_skb;
830 }
831 }
832 }
833
834 /* Update our ARP tables */
835
836 n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
837
838 if (IN_DEV_ARP_ACCEPT(in_dev)) {
839 unsigned int addr_type = inet_addr_type_dev_table(net, dev, sip);
840
841 /* Unsolicited ARP is not accepted by default.
842 It is possible, that this option should be enabled for some
843 devices (strip is candidate)
844 */
845 is_garp = arp->ar_op == htons(ARPOP_REQUEST) && tip == sip &&
846 addr_type == RTN_UNICAST;
847
848 if (!n &&
849 ((arp->ar_op == htons(ARPOP_REPLY) &&
850 addr_type == RTN_UNICAST) || is_garp))
851 n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
852 }
853
854 if (n) {
855 int state = NUD_REACHABLE;
856 int override;
857
858 /* If several different ARP replies follows back-to-back,
859 use the FIRST one. It is possible, if several proxy
860 agents are active. Taking the first reply prevents
861 arp trashing and chooses the fastest router.
862 */
863 override = time_after(jiffies,
864 n->updated +
865 NEIGH_VAR(n->parms, LOCKTIME)) ||
866 is_garp;
867
868 /* Broadcast replies and request packets
869 do not assert neighbour reachability.
870 */
871 if (arp->ar_op != htons(ARPOP_REPLY) ||
872 skb->pkt_type != PACKET_HOST)
873 state = NUD_STALE;
874 neigh_update(n, sha, state,
875 override ? NEIGH_UPDATE_F_OVERRIDE : 0);
876 neigh_release(n);
877 }
878
879out_consume_skb:
880 consume_skb(skb);
881
882out_free_dst:
883 dst_release(reply_dst);
884 return NET_RX_SUCCESS;
885
886out_free_skb:
887 kfree_skb(skb);
888 return NET_RX_DROP;
889}
890
891static void parp_redo(struct sk_buff *skb)
892{
893 arp_process(dev_net(skb->dev), NULL, skb);
894}
895
896
897/*
898 * Receive an arp request from the device layer.
899 */
900
901static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
902 struct packet_type *pt, struct net_device *orig_dev)
903{
904 const struct arphdr *arp;
905
906 /* do not tweak dropwatch on an ARP we will ignore */
907 if (dev->flags & IFF_NOARP ||
908 skb->pkt_type == PACKET_OTHERHOST ||
909 skb->pkt_type == PACKET_LOOPBACK)
910 goto consumeskb;
911
912 skb = skb_share_check(skb, GFP_ATOMIC);
913 if (!skb)
914 goto out_of_mem;
915
916 /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
917 if (!pskb_may_pull(skb, arp_hdr_len(dev)))
918 goto freeskb;
919
920 arp = arp_hdr(skb);
921 if (arp->ar_hln != dev->addr_len || arp->ar_pln != 4)
922 goto freeskb;
923
924 memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
925
926 return NF_HOOK(NFPROTO_ARP, NF_ARP_IN,
927 dev_net(dev), NULL, skb, dev, NULL,
928 arp_process);
929
930consumeskb:
931 consume_skb(skb);
932 return NET_RX_SUCCESS;
933freeskb:
934 kfree_skb(skb);
935out_of_mem:
936 return NET_RX_DROP;
937}
938
939/*
940 * User level interface (ioctl)
941 */
942
943/*
944 * Set (create) an ARP cache entry.
945 */
946
947static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on)
948{
949 if (!dev) {
950 IPV4_DEVCONF_ALL(net, PROXY_ARP) = on;
951 return 0;
952 }
953 if (__in_dev_get_rtnl(dev)) {
954 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on);
955 return 0;
956 }
957 return -ENXIO;
958}
959
960static int arp_req_set_public(struct net *net, struct arpreq *r,
961 struct net_device *dev)
962{
963 __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
964 __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
965
966 if (mask && mask != htonl(0xFFFFFFFF))
967 return -EINVAL;
968 if (!dev && (r->arp_flags & ATF_COM)) {
969 dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family,
970 r->arp_ha.sa_data);
971 if (!dev)
972 return -ENODEV;
973 }
974 if (mask) {
975 if (!pneigh_lookup(&arp_tbl, net, &ip, dev, 1))
976 return -ENOBUFS;
977 return 0;
978 }
979
980 return arp_req_set_proxy(net, dev, 1);
981}
982
983static int arp_req_set(struct net *net, struct arpreq *r,
984 struct net_device *dev)
985{
986 __be32 ip;
987 struct neighbour *neigh;
988 int err;
989
990 if (r->arp_flags & ATF_PUBL)
991 return arp_req_set_public(net, r, dev);
992
993 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
994 if (r->arp_flags & ATF_PERM)
995 r->arp_flags |= ATF_COM;
996 if (!dev) {
997 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
998
999 if (IS_ERR(rt))
1000 return PTR_ERR(rt);
1001 dev = rt->dst.dev;
1002 ip_rt_put(rt);
1003 if (!dev)
1004 return -EINVAL;
1005 }
1006 switch (dev->type) {
1007#if IS_ENABLED(CONFIG_FDDI)
1008 case ARPHRD_FDDI:
1009 /*
1010 * According to RFC 1390, FDDI devices should accept ARP
1011 * hardware types of 1 (Ethernet). However, to be more
1012 * robust, we'll accept hardware types of either 1 (Ethernet)
1013 * or 6 (IEEE 802.2).
1014 */
1015 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1016 r->arp_ha.sa_family != ARPHRD_ETHER &&
1017 r->arp_ha.sa_family != ARPHRD_IEEE802)
1018 return -EINVAL;
1019 break;
1020#endif
1021 default:
1022 if (r->arp_ha.sa_family != dev->type)
1023 return -EINVAL;
1024 break;
1025 }
1026
1027 neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1028 err = PTR_ERR(neigh);
1029 if (!IS_ERR(neigh)) {
1030 unsigned int state = NUD_STALE;
1031 if (r->arp_flags & ATF_PERM)
1032 state = NUD_PERMANENT;
1033 err = neigh_update(neigh, (r->arp_flags & ATF_COM) ?
1034 r->arp_ha.sa_data : NULL, state,
1035 NEIGH_UPDATE_F_OVERRIDE |
1036 NEIGH_UPDATE_F_ADMIN);
1037 neigh_release(neigh);
1038 }
1039 return err;
1040}
1041
1042static unsigned int arp_state_to_flags(struct neighbour *neigh)
1043{
1044 if (neigh->nud_state&NUD_PERMANENT)
1045 return ATF_PERM | ATF_COM;
1046 else if (neigh->nud_state&NUD_VALID)
1047 return ATF_COM;
1048 else
1049 return 0;
1050}
1051
1052/*
1053 * Get an ARP cache entry.
1054 */
1055
1056static int arp_req_get(struct arpreq *r, struct net_device *dev)
1057{
1058 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1059 struct neighbour *neigh;
1060 int err = -ENXIO;
1061
1062 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1063 if (neigh) {
1064 if (!(neigh->nud_state & NUD_NOARP)) {
1065 read_lock_bh(&neigh->lock);
1066 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1067 r->arp_flags = arp_state_to_flags(neigh);
1068 read_unlock_bh(&neigh->lock);
1069 r->arp_ha.sa_family = dev->type;
1070 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1071 err = 0;
1072 }
1073 neigh_release(neigh);
1074 }
1075 return err;
1076}
1077
1078static int arp_invalidate(struct net_device *dev, __be32 ip)
1079{
1080 struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
1081 int err = -ENXIO;
1082
1083 if (neigh) {
1084 if (neigh->nud_state & ~NUD_NOARP)
1085 err = neigh_update(neigh, NULL, NUD_FAILED,
1086 NEIGH_UPDATE_F_OVERRIDE|
1087 NEIGH_UPDATE_F_ADMIN);
1088 neigh_release(neigh);
1089 }
1090
1091 return err;
1092}
1093
1094static int arp_req_delete_public(struct net *net, struct arpreq *r,
1095 struct net_device *dev)
1096{
1097 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1098 __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1099
1100 if (mask == htonl(0xFFFFFFFF))
1101 return pneigh_delete(&arp_tbl, net, &ip, dev);
1102
1103 if (mask)
1104 return -EINVAL;
1105
1106 return arp_req_set_proxy(net, dev, 0);
1107}
1108
1109static int arp_req_delete(struct net *net, struct arpreq *r,
1110 struct net_device *dev)
1111{
1112 __be32 ip;
1113
1114 if (r->arp_flags & ATF_PUBL)
1115 return arp_req_delete_public(net, r, dev);
1116
1117 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1118 if (!dev) {
1119 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1120 if (IS_ERR(rt))
1121 return PTR_ERR(rt);
1122 dev = rt->dst.dev;
1123 ip_rt_put(rt);
1124 if (!dev)
1125 return -EINVAL;
1126 }
1127 return arp_invalidate(dev, ip);
1128}
1129
1130/*
1131 * Handle an ARP layer I/O control request.
1132 */
1133
1134int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
1135{
1136 int err;
1137 struct arpreq r;
1138 struct net_device *dev = NULL;
1139
1140 switch (cmd) {
1141 case SIOCDARP:
1142 case SIOCSARP:
1143 if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
1144 return -EPERM;
1145 case SIOCGARP:
1146 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1147 if (err)
1148 return -EFAULT;
1149 break;
1150 default:
1151 return -EINVAL;
1152 }
1153
1154 if (r.arp_pa.sa_family != AF_INET)
1155 return -EPFNOSUPPORT;
1156
1157 if (!(r.arp_flags & ATF_PUBL) &&
1158 (r.arp_flags & (ATF_NETMASK | ATF_DONTPUB)))
1159 return -EINVAL;
1160 if (!(r.arp_flags & ATF_NETMASK))
1161 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1162 htonl(0xFFFFFFFFUL);
1163 rtnl_lock();
1164 if (r.arp_dev[0]) {
1165 err = -ENODEV;
1166 dev = __dev_get_by_name(net, r.arp_dev);
1167 if (!dev)
1168 goto out;
1169
1170 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1171 if (!r.arp_ha.sa_family)
1172 r.arp_ha.sa_family = dev->type;
1173 err = -EINVAL;
1174 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1175 goto out;
1176 } else if (cmd == SIOCGARP) {
1177 err = -ENODEV;
1178 goto out;
1179 }
1180
1181 switch (cmd) {
1182 case SIOCDARP:
1183 err = arp_req_delete(net, &r, dev);
1184 break;
1185 case SIOCSARP:
1186 err = arp_req_set(net, &r, dev);
1187 break;
1188 case SIOCGARP:
1189 err = arp_req_get(&r, dev);
1190 break;
1191 }
1192out:
1193 rtnl_unlock();
1194 if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r)))
1195 err = -EFAULT;
1196 return err;
1197}
1198
1199static int arp_netdev_event(struct notifier_block *this, unsigned long event,
1200 void *ptr)
1201{
1202 struct net_device *dev = netdev_notifier_info_to_dev(ptr);
1203 struct netdev_notifier_change_info *change_info;
1204
1205 switch (event) {
1206 case NETDEV_CHANGEADDR:
1207 neigh_changeaddr(&arp_tbl, dev);
1208 rt_cache_flush(dev_net(dev));
1209 break;
1210 case NETDEV_CHANGE:
1211 change_info = ptr;
1212 if (change_info->flags_changed & IFF_NOARP)
1213 neigh_changeaddr(&arp_tbl, dev);
1214 break;
1215 default:
1216 break;
1217 }
1218
1219 return NOTIFY_DONE;
1220}
1221
1222static struct notifier_block arp_netdev_notifier = {
1223 .notifier_call = arp_netdev_event,
1224};
1225
1226/* Note, that it is not on notifier chain.
1227 It is necessary, that this routine was called after route cache will be
1228 flushed.
1229 */
1230void arp_ifdown(struct net_device *dev)
1231{
1232 neigh_ifdown(&arp_tbl, dev);
1233}
1234
1235
1236/*
1237 * Called once on startup.
1238 */
1239
1240static struct packet_type arp_packet_type __read_mostly = {
1241 .type = cpu_to_be16(ETH_P_ARP),
1242 .func = arp_rcv,
1243};
1244
1245static int arp_proc_init(void);
1246
1247void __init arp_init(void)
1248{
1249 neigh_table_init(NEIGH_ARP_TABLE, &arp_tbl);
1250
1251 dev_add_pack(&arp_packet_type);
1252 arp_proc_init();
1253#ifdef CONFIG_SYSCTL
1254 neigh_sysctl_register(NULL, &arp_tbl.parms, NULL);
1255#endif
1256 register_netdevice_notifier(&arp_netdev_notifier);
1257}
1258
1259#ifdef CONFIG_PROC_FS
1260#if IS_ENABLED(CONFIG_AX25)
1261
1262/* ------------------------------------------------------------------------ */
1263/*
1264 * ax25 -> ASCII conversion
1265 */
1266static char *ax2asc2(ax25_address *a, char *buf)
1267{
1268 char c, *s;
1269 int n;
1270
1271 for (n = 0, s = buf; n < 6; n++) {
1272 c = (a->ax25_call[n] >> 1) & 0x7F;
1273
1274 if (c != ' ')
1275 *s++ = c;
1276 }
1277
1278 *s++ = '-';
1279 n = (a->ax25_call[6] >> 1) & 0x0F;
1280 if (n > 9) {
1281 *s++ = '1';
1282 n -= 10;
1283 }
1284
1285 *s++ = n + '0';
1286 *s++ = '\0';
1287
1288 if (*buf == '\0' || *buf == '-')
1289 return "*";
1290
1291 return buf;
1292}
1293#endif /* CONFIG_AX25 */
1294
1295#define HBUFFERLEN 30
1296
1297static void arp_format_neigh_entry(struct seq_file *seq,
1298 struct neighbour *n)
1299{
1300 char hbuffer[HBUFFERLEN];
1301 int k, j;
1302 char tbuf[16];
1303 struct net_device *dev = n->dev;
1304 int hatype = dev->type;
1305
1306 read_lock(&n->lock);
1307 /* Convert hardware address to XX:XX:XX:XX ... form. */
1308#if IS_ENABLED(CONFIG_AX25)
1309 if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1310 ax2asc2((ax25_address *)n->ha, hbuffer);
1311 else {
1312#endif
1313 for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1314 hbuffer[k++] = hex_asc_hi(n->ha[j]);
1315 hbuffer[k++] = hex_asc_lo(n->ha[j]);
1316 hbuffer[k++] = ':';
1317 }
1318 if (k != 0)
1319 --k;
1320 hbuffer[k] = 0;
1321#if IS_ENABLED(CONFIG_AX25)
1322 }
1323#endif
1324 sprintf(tbuf, "%pI4", n->primary_key);
1325 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1326 tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1327 read_unlock(&n->lock);
1328}
1329
1330static void arp_format_pneigh_entry(struct seq_file *seq,
1331 struct pneigh_entry *n)
1332{
1333 struct net_device *dev = n->dev;
1334 int hatype = dev ? dev->type : 0;
1335 char tbuf[16];
1336
1337 sprintf(tbuf, "%pI4", n->key);
1338 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1339 tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1340 dev ? dev->name : "*");
1341}
1342
1343static int arp_seq_show(struct seq_file *seq, void *v)
1344{
1345 if (v == SEQ_START_TOKEN) {
1346 seq_puts(seq, "IP address HW type Flags "
1347 "HW address Mask Device\n");
1348 } else {
1349 struct neigh_seq_state *state = seq->private;
1350
1351 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1352 arp_format_pneigh_entry(seq, v);
1353 else
1354 arp_format_neigh_entry(seq, v);
1355 }
1356
1357 return 0;
1358}
1359
1360static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1361{
1362 /* Don't want to confuse "arp -a" w/ magic entries,
1363 * so we tell the generic iterator to skip NUD_NOARP.
1364 */
1365 return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1366}
1367
1368/* ------------------------------------------------------------------------ */
1369
1370static const struct seq_operations arp_seq_ops = {
1371 .start = arp_seq_start,
1372 .next = neigh_seq_next,
1373 .stop = neigh_seq_stop,
1374 .show = arp_seq_show,
1375};
1376
1377static int arp_seq_open(struct inode *inode, struct file *file)
1378{
1379 return seq_open_net(inode, file, &arp_seq_ops,
1380 sizeof(struct neigh_seq_state));
1381}
1382
1383static const struct file_operations arp_seq_fops = {
1384 .owner = THIS_MODULE,
1385 .open = arp_seq_open,
1386 .read = seq_read,
1387 .llseek = seq_lseek,
1388 .release = seq_release_net,
1389};
1390
1391
1392static int __net_init arp_net_init(struct net *net)
1393{
1394 if (!proc_create("arp", S_IRUGO, net->proc_net, &arp_seq_fops))
1395 return -ENOMEM;
1396 return 0;
1397}
1398
1399static void __net_exit arp_net_exit(struct net *net)
1400{
1401 remove_proc_entry("arp", net->proc_net);
1402}
1403
1404static struct pernet_operations arp_net_ops = {
1405 .init = arp_net_init,
1406 .exit = arp_net_exit,
1407};
1408
1409static int __init arp_proc_init(void)
1410{
1411 return register_pernet_subsys(&arp_net_ops);
1412}
1413
1414#else /* CONFIG_PROC_FS */
1415
1416static int __init arp_proc_init(void)
1417{
1418 return 0;
1419}
1420
1421#endif /* CONFIG_PROC_FS */