Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
4 *
5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
6 *
7 * Authors: Felipe Balbi <balbi@ti.com>,
8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 */
10
11#include <linux/kernel.h>
12#include <linux/slab.h>
13#include <linux/spinlock.h>
14#include <linux/platform_device.h>
15#include <linux/pm_runtime.h>
16#include <linux/interrupt.h>
17#include <linux/io.h>
18#include <linux/list.h>
19#include <linux/dma-mapping.h>
20
21#include <linux/usb/ch9.h>
22#include <linux/usb/gadget.h>
23#include <linux/usb/composite.h>
24
25#include "core.h"
26#include "debug.h"
27#include "gadget.h"
28#include "io.h"
29
30static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
31static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
32 struct dwc3_ep *dep, struct dwc3_request *req);
33static int dwc3_ep0_delegate_req(struct dwc3 *dwc,
34 struct usb_ctrlrequest *ctrl);
35
36static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
37 dma_addr_t buf_dma, u32 len, u32 type, bool chain)
38{
39 struct dwc3_trb *trb;
40 struct dwc3 *dwc;
41
42 dwc = dep->dwc;
43 trb = &dwc->ep0_trb[dep->trb_enqueue];
44
45 if (chain)
46 dep->trb_enqueue++;
47
48 trb->bpl = lower_32_bits(buf_dma);
49 trb->bph = upper_32_bits(buf_dma);
50 trb->size = len;
51 trb->ctrl = type;
52
53 trb->ctrl |= (DWC3_TRB_CTRL_HWO
54 | DWC3_TRB_CTRL_ISP_IMI);
55
56 if (chain)
57 trb->ctrl |= DWC3_TRB_CTRL_CHN;
58 else
59 trb->ctrl |= (DWC3_TRB_CTRL_IOC
60 | DWC3_TRB_CTRL_LST);
61
62 trace_dwc3_prepare_trb(dep, trb);
63}
64
65static int dwc3_ep0_start_trans(struct dwc3_ep *dep)
66{
67 struct dwc3_gadget_ep_cmd_params params;
68 struct dwc3 *dwc;
69 int ret;
70
71 if (dep->flags & DWC3_EP_TRANSFER_STARTED)
72 return 0;
73
74 dwc = dep->dwc;
75
76 memset(¶ms, 0, sizeof(params));
77 params.param0 = upper_32_bits(dwc->ep0_trb_addr);
78 params.param1 = lower_32_bits(dwc->ep0_trb_addr);
79
80 ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms);
81 if (ret < 0)
82 return ret;
83
84 dwc->ep0_next_event = DWC3_EP0_COMPLETE;
85
86 return 0;
87}
88
89static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
90 struct dwc3_request *req)
91{
92 struct dwc3 *dwc = dep->dwc;
93
94 req->request.actual = 0;
95 req->request.status = -EINPROGRESS;
96 req->epnum = dep->number;
97
98 list_add_tail(&req->list, &dep->pending_list);
99
100 /*
101 * Gadget driver might not be quick enough to queue a request
102 * before we get a Transfer Not Ready event on this endpoint.
103 *
104 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
105 * flag is set, it's telling us that as soon as Gadget queues the
106 * required request, we should kick the transfer here because the
107 * IRQ we were waiting for is long gone.
108 */
109 if (dep->flags & DWC3_EP_PENDING_REQUEST) {
110 unsigned int direction;
111
112 direction = !!(dep->flags & DWC3_EP0_DIR_IN);
113
114 if (dwc->ep0state != EP0_DATA_PHASE) {
115 dev_WARN(dwc->dev, "Unexpected pending request\n");
116 return 0;
117 }
118
119 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
120
121 dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
122 DWC3_EP0_DIR_IN);
123
124 return 0;
125 }
126
127 /*
128 * In case gadget driver asked us to delay the STATUS phase,
129 * handle it here.
130 */
131 if (dwc->delayed_status) {
132 unsigned int direction;
133
134 direction = !dwc->ep0_expect_in;
135 dwc->delayed_status = false;
136 usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
137
138 if (dwc->ep0state == EP0_STATUS_PHASE)
139 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
140
141 return 0;
142 }
143
144 /*
145 * Unfortunately we have uncovered a limitation wrt the Data Phase.
146 *
147 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
148 * come before issueing Start Transfer command, but if we do, we will
149 * miss situations where the host starts another SETUP phase instead of
150 * the DATA phase. Such cases happen at least on TD.7.6 of the Link
151 * Layer Compliance Suite.
152 *
153 * The problem surfaces due to the fact that in case of back-to-back
154 * SETUP packets there will be no XferNotReady(DATA) generated and we
155 * will be stuck waiting for XferNotReady(DATA) forever.
156 *
157 * By looking at tables 9-13 and 9-14 of the Databook, we can see that
158 * it tells us to start Data Phase right away. It also mentions that if
159 * we receive a SETUP phase instead of the DATA phase, core will issue
160 * XferComplete for the DATA phase, before actually initiating it in
161 * the wire, with the TRB's status set to "SETUP_PENDING". Such status
162 * can only be used to print some debugging logs, as the core expects
163 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
164 * just so it completes right away, without transferring anything and,
165 * only then, we can go back to the SETUP phase.
166 *
167 * Because of this scenario, SNPS decided to change the programming
168 * model of control transfers and support on-demand transfers only for
169 * the STATUS phase. To fix the issue we have now, we will always wait
170 * for gadget driver to queue the DATA phase's struct usb_request, then
171 * start it right away.
172 *
173 * If we're actually in a 2-stage transfer, we will wait for
174 * XferNotReady(STATUS).
175 */
176 if (dwc->three_stage_setup) {
177 unsigned int direction;
178
179 direction = dwc->ep0_expect_in;
180 dwc->ep0state = EP0_DATA_PHASE;
181
182 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
183
184 dep->flags &= ~DWC3_EP0_DIR_IN;
185 }
186
187 return 0;
188}
189
190int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
191 gfp_t gfp_flags)
192{
193 struct dwc3_request *req = to_dwc3_request(request);
194 struct dwc3_ep *dep = to_dwc3_ep(ep);
195 struct dwc3 *dwc = dep->dwc;
196
197 unsigned long flags;
198
199 int ret;
200
201 spin_lock_irqsave(&dwc->lock, flags);
202 if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
203 dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
204 dep->name);
205 ret = -ESHUTDOWN;
206 goto out;
207 }
208
209 /* we share one TRB for ep0/1 */
210 if (!list_empty(&dep->pending_list)) {
211 ret = -EBUSY;
212 goto out;
213 }
214
215 ret = __dwc3_gadget_ep0_queue(dep, req);
216
217out:
218 spin_unlock_irqrestore(&dwc->lock, flags);
219
220 return ret;
221}
222
223void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
224{
225 struct dwc3_ep *dep;
226
227 /* reinitialize physical ep1 */
228 dep = dwc->eps[1];
229 dep->flags = DWC3_EP_ENABLED;
230
231 /* stall is always issued on EP0 */
232 dep = dwc->eps[0];
233 __dwc3_gadget_ep_set_halt(dep, 1, false);
234 dep->flags = DWC3_EP_ENABLED;
235 dwc->delayed_status = false;
236
237 if (!list_empty(&dep->pending_list)) {
238 struct dwc3_request *req;
239
240 req = next_request(&dep->pending_list);
241 if (!dwc->connected)
242 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
243 else
244 dwc3_gadget_giveback(dep, req, -ECONNRESET);
245 }
246
247 dwc->eps[0]->trb_enqueue = 0;
248 dwc->eps[1]->trb_enqueue = 0;
249 dwc->ep0state = EP0_SETUP_PHASE;
250 dwc3_ep0_out_start(dwc);
251}
252
253int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
254{
255 struct dwc3_ep *dep = to_dwc3_ep(ep);
256 struct dwc3 *dwc = dep->dwc;
257
258 dwc3_ep0_stall_and_restart(dwc);
259
260 return 0;
261}
262
263int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
264{
265 struct dwc3_ep *dep = to_dwc3_ep(ep);
266 struct dwc3 *dwc = dep->dwc;
267 unsigned long flags;
268 int ret;
269
270 spin_lock_irqsave(&dwc->lock, flags);
271 ret = __dwc3_gadget_ep0_set_halt(ep, value);
272 spin_unlock_irqrestore(&dwc->lock, flags);
273
274 return ret;
275}
276
277void dwc3_ep0_out_start(struct dwc3 *dwc)
278{
279 struct dwc3_ep *dep;
280 int ret;
281 int i;
282
283 complete(&dwc->ep0_in_setup);
284
285 dep = dwc->eps[0];
286 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8,
287 DWC3_TRBCTL_CONTROL_SETUP, false);
288 ret = dwc3_ep0_start_trans(dep);
289 WARN_ON(ret < 0);
290 for (i = 2; i < DWC3_ENDPOINTS_NUM; i++) {
291 struct dwc3_ep *dwc3_ep;
292
293 dwc3_ep = dwc->eps[i];
294 if (!dwc3_ep)
295 continue;
296
297 if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP))
298 continue;
299
300 dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
301 if (dwc->connected)
302 dwc3_stop_active_transfer(dwc3_ep, true, true);
303 else
304 dwc3_remove_requests(dwc, dwc3_ep, -ESHUTDOWN);
305 }
306}
307
308static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
309{
310 struct dwc3_ep *dep;
311 u32 windex = le16_to_cpu(wIndex_le);
312 u32 epnum;
313
314 epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
315 if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
316 epnum |= 1;
317
318 dep = dwc->eps[epnum];
319 if (dep == NULL)
320 return NULL;
321
322 if (dep->flags & DWC3_EP_ENABLED)
323 return dep;
324
325 return NULL;
326}
327
328static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
329{
330}
331/*
332 * ch 9.4.5
333 */
334static int dwc3_ep0_handle_status(struct dwc3 *dwc,
335 struct usb_ctrlrequest *ctrl)
336{
337 struct dwc3_ep *dep;
338 u32 recip;
339 u32 value;
340 u32 reg;
341 u16 usb_status = 0;
342 __le16 *response_pkt;
343
344 /* We don't support PTM_STATUS */
345 value = le16_to_cpu(ctrl->wValue);
346 if (value != 0)
347 return -EINVAL;
348
349 recip = ctrl->bRequestType & USB_RECIP_MASK;
350 switch (recip) {
351 case USB_RECIP_DEVICE:
352 /*
353 * LTM will be set once we know how to set this in HW.
354 */
355 usb_status |= dwc->gadget->is_selfpowered;
356
357 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
358 (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
359 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
360 if (reg & DWC3_DCTL_INITU1ENA)
361 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
362 if (reg & DWC3_DCTL_INITU2ENA)
363 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
364 } else {
365 usb_status |= dwc->gadget->wakeup_armed <<
366 USB_DEVICE_REMOTE_WAKEUP;
367 }
368
369 break;
370
371 case USB_RECIP_INTERFACE:
372 /*
373 * Function Remote Wake Capable D0
374 * Function Remote Wakeup D1
375 */
376 return dwc3_ep0_delegate_req(dwc, ctrl);
377
378 case USB_RECIP_ENDPOINT:
379 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
380 if (!dep)
381 return -EINVAL;
382
383 if (dep->flags & DWC3_EP_STALL)
384 usb_status = 1 << USB_ENDPOINT_HALT;
385 break;
386 default:
387 return -EINVAL;
388 }
389
390 response_pkt = (__le16 *) dwc->setup_buf;
391 *response_pkt = cpu_to_le16(usb_status);
392
393 dep = dwc->eps[0];
394 dwc->ep0_usb_req.dep = dep;
395 dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
396 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
397 dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
398
399 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
400}
401
402static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,
403 int set)
404{
405 u32 reg;
406
407 if (state != USB_STATE_CONFIGURED)
408 return -EINVAL;
409 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
410 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
411 return -EINVAL;
412 if (set && dwc->dis_u1_entry_quirk)
413 return -EINVAL;
414
415 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
416 if (set)
417 reg |= DWC3_DCTL_INITU1ENA;
418 else
419 reg &= ~DWC3_DCTL_INITU1ENA;
420 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
421
422 return 0;
423}
424
425static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,
426 int set)
427{
428 u32 reg;
429
430
431 if (state != USB_STATE_CONFIGURED)
432 return -EINVAL;
433 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
434 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
435 return -EINVAL;
436 if (set && dwc->dis_u2_entry_quirk)
437 return -EINVAL;
438
439 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
440 if (set)
441 reg |= DWC3_DCTL_INITU2ENA;
442 else
443 reg &= ~DWC3_DCTL_INITU2ENA;
444 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
445
446 return 0;
447}
448
449static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state,
450 u32 wIndex, int set)
451{
452 if ((wIndex & 0xff) != 0)
453 return -EINVAL;
454 if (!set)
455 return -EINVAL;
456
457 switch (wIndex >> 8) {
458 case USB_TEST_J:
459 case USB_TEST_K:
460 case USB_TEST_SE0_NAK:
461 case USB_TEST_PACKET:
462 case USB_TEST_FORCE_ENABLE:
463 dwc->test_mode_nr = wIndex >> 8;
464 dwc->test_mode = true;
465 break;
466 default:
467 return -EINVAL;
468 }
469
470 return 0;
471}
472
473static int dwc3_ep0_handle_device(struct dwc3 *dwc,
474 struct usb_ctrlrequest *ctrl, int set)
475{
476 enum usb_device_state state;
477 u32 wValue;
478 u32 wIndex;
479 int ret = 0;
480
481 wValue = le16_to_cpu(ctrl->wValue);
482 wIndex = le16_to_cpu(ctrl->wIndex);
483 state = dwc->gadget->state;
484
485 switch (wValue) {
486 case USB_DEVICE_REMOTE_WAKEUP:
487 if (dwc->wakeup_configured)
488 dwc->gadget->wakeup_armed = set;
489 else
490 ret = -EINVAL;
491 break;
492 /*
493 * 9.4.1 says only for SS, in AddressState only for
494 * default control pipe
495 */
496 case USB_DEVICE_U1_ENABLE:
497 ret = dwc3_ep0_handle_u1(dwc, state, set);
498 break;
499 case USB_DEVICE_U2_ENABLE:
500 ret = dwc3_ep0_handle_u2(dwc, state, set);
501 break;
502 case USB_DEVICE_LTM_ENABLE:
503 ret = -EINVAL;
504 break;
505 case USB_DEVICE_TEST_MODE:
506 ret = dwc3_ep0_handle_test(dwc, state, wIndex, set);
507 break;
508 default:
509 ret = -EINVAL;
510 }
511
512 return ret;
513}
514
515static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
516 struct usb_ctrlrequest *ctrl, int set)
517{
518 u32 wValue;
519 int ret = 0;
520
521 wValue = le16_to_cpu(ctrl->wValue);
522
523 switch (wValue) {
524 case USB_INTRF_FUNC_SUSPEND:
525 ret = dwc3_ep0_delegate_req(dwc, ctrl);
526 break;
527 default:
528 ret = -EINVAL;
529 }
530
531 return ret;
532}
533
534static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
535 struct usb_ctrlrequest *ctrl, int set)
536{
537 struct dwc3_ep *dep;
538 u32 wValue;
539 int ret;
540
541 wValue = le16_to_cpu(ctrl->wValue);
542
543 switch (wValue) {
544 case USB_ENDPOINT_HALT:
545 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
546 if (!dep)
547 return -EINVAL;
548
549 if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
550 break;
551
552 ret = __dwc3_gadget_ep_set_halt(dep, set, true);
553 if (ret)
554 return -EINVAL;
555
556 /* ClearFeature(Halt) may need delayed status */
557 if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
558 return USB_GADGET_DELAYED_STATUS;
559
560 break;
561 default:
562 return -EINVAL;
563 }
564
565 return 0;
566}
567
568static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
569 struct usb_ctrlrequest *ctrl, int set)
570{
571 u32 recip;
572 int ret;
573
574 recip = ctrl->bRequestType & USB_RECIP_MASK;
575
576 switch (recip) {
577 case USB_RECIP_DEVICE:
578 ret = dwc3_ep0_handle_device(dwc, ctrl, set);
579 break;
580 case USB_RECIP_INTERFACE:
581 ret = dwc3_ep0_handle_intf(dwc, ctrl, set);
582 break;
583 case USB_RECIP_ENDPOINT:
584 ret = dwc3_ep0_handle_endpoint(dwc, ctrl, set);
585 break;
586 default:
587 ret = -EINVAL;
588 }
589
590 return ret;
591}
592
593static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
594{
595 enum usb_device_state state = dwc->gadget->state;
596 u32 addr;
597 u32 reg;
598
599 addr = le16_to_cpu(ctrl->wValue);
600 if (addr > 127) {
601 dev_err(dwc->dev, "invalid device address %d\n", addr);
602 return -EINVAL;
603 }
604
605 if (state == USB_STATE_CONFIGURED) {
606 dev_err(dwc->dev, "can't SetAddress() from Configured State\n");
607 return -EINVAL;
608 }
609
610 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
611 reg &= ~(DWC3_DCFG_DEVADDR_MASK);
612 reg |= DWC3_DCFG_DEVADDR(addr);
613 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
614
615 if (addr)
616 usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
617 else
618 usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
619
620 return 0;
621}
622
623static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
624{
625 int ret = -EINVAL;
626
627 if (dwc->async_callbacks) {
628 spin_unlock(&dwc->lock);
629 ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
630 spin_lock(&dwc->lock);
631 }
632 return ret;
633}
634
635static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
636{
637 enum usb_device_state state = dwc->gadget->state;
638 u32 cfg;
639 int ret;
640 u32 reg;
641
642 cfg = le16_to_cpu(ctrl->wValue);
643
644 switch (state) {
645 case USB_STATE_DEFAULT:
646 return -EINVAL;
647
648 case USB_STATE_ADDRESS:
649 dwc3_gadget_clear_tx_fifos(dwc);
650
651 ret = dwc3_ep0_delegate_req(dwc, ctrl);
652 /* if the cfg matches and the cfg is non zero */
653 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
654
655 /*
656 * only change state if set_config has already
657 * been processed. If gadget driver returns
658 * USB_GADGET_DELAYED_STATUS, we will wait
659 * to change the state on the next usb_ep_queue()
660 */
661 if (ret == 0)
662 usb_gadget_set_state(dwc->gadget,
663 USB_STATE_CONFIGURED);
664
665 /*
666 * Enable transition to U1/U2 state when
667 * nothing is pending from application.
668 */
669 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
670 if (!dwc->dis_u1_entry_quirk)
671 reg |= DWC3_DCTL_ACCEPTU1ENA;
672 if (!dwc->dis_u2_entry_quirk)
673 reg |= DWC3_DCTL_ACCEPTU2ENA;
674 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
675 }
676 break;
677
678 case USB_STATE_CONFIGURED:
679 ret = dwc3_ep0_delegate_req(dwc, ctrl);
680 if (!cfg && !ret)
681 usb_gadget_set_state(dwc->gadget,
682 USB_STATE_ADDRESS);
683 break;
684 default:
685 ret = -EINVAL;
686 }
687 return ret;
688}
689
690static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
691{
692 struct dwc3_ep *dep = to_dwc3_ep(ep);
693 struct dwc3 *dwc = dep->dwc;
694
695 u32 param = 0;
696 u32 reg;
697
698 struct timing {
699 u8 u1sel;
700 u8 u1pel;
701 __le16 u2sel;
702 __le16 u2pel;
703 } __packed timing;
704
705 int ret;
706
707 memcpy(&timing, req->buf, sizeof(timing));
708
709 dwc->u1sel = timing.u1sel;
710 dwc->u1pel = timing.u1pel;
711 dwc->u2sel = le16_to_cpu(timing.u2sel);
712 dwc->u2pel = le16_to_cpu(timing.u2pel);
713
714 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
715 if (reg & DWC3_DCTL_INITU2ENA)
716 param = dwc->u2pel;
717 if (reg & DWC3_DCTL_INITU1ENA)
718 param = dwc->u1pel;
719
720 /*
721 * According to Synopsys Databook, if parameter is
722 * greater than 125, a value of zero should be
723 * programmed in the register.
724 */
725 if (param > 125)
726 param = 0;
727
728 /* now that we have the time, issue DGCMD Set Sel */
729 ret = dwc3_send_gadget_generic_command(dwc,
730 DWC3_DGCMD_SET_PERIODIC_PAR, param);
731 WARN_ON(ret < 0);
732}
733
734static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
735{
736 struct dwc3_ep *dep;
737 enum usb_device_state state = dwc->gadget->state;
738 u16 wLength;
739
740 if (state == USB_STATE_DEFAULT)
741 return -EINVAL;
742
743 wLength = le16_to_cpu(ctrl->wLength);
744
745 if (wLength != 6) {
746 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
747 wLength);
748 return -EINVAL;
749 }
750
751 /*
752 * To handle Set SEL we need to receive 6 bytes from Host. So let's
753 * queue a usb_request for 6 bytes.
754 *
755 * Remember, though, this controller can't handle non-wMaxPacketSize
756 * aligned transfers on the OUT direction, so we queue a request for
757 * wMaxPacketSize instead.
758 */
759 dep = dwc->eps[0];
760 dwc->ep0_usb_req.dep = dep;
761 dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
762 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
763 dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
764
765 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
766}
767
768static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
769{
770 u16 wLength;
771 u16 wValue;
772 u16 wIndex;
773
774 wValue = le16_to_cpu(ctrl->wValue);
775 wLength = le16_to_cpu(ctrl->wLength);
776 wIndex = le16_to_cpu(ctrl->wIndex);
777
778 if (wIndex || wLength)
779 return -EINVAL;
780
781 dwc->gadget->isoch_delay = wValue;
782
783 return 0;
784}
785
786static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
787{
788 int ret;
789
790 switch (ctrl->bRequest) {
791 case USB_REQ_GET_STATUS:
792 ret = dwc3_ep0_handle_status(dwc, ctrl);
793 break;
794 case USB_REQ_CLEAR_FEATURE:
795 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
796 break;
797 case USB_REQ_SET_FEATURE:
798 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
799 break;
800 case USB_REQ_SET_ADDRESS:
801 ret = dwc3_ep0_set_address(dwc, ctrl);
802 break;
803 case USB_REQ_SET_CONFIGURATION:
804 ret = dwc3_ep0_set_config(dwc, ctrl);
805 break;
806 case USB_REQ_SET_SEL:
807 ret = dwc3_ep0_set_sel(dwc, ctrl);
808 break;
809 case USB_REQ_SET_ISOCH_DELAY:
810 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
811 break;
812 default:
813 ret = dwc3_ep0_delegate_req(dwc, ctrl);
814 break;
815 }
816
817 return ret;
818}
819
820static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
821 const struct dwc3_event_depevt *event)
822{
823 struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb;
824 int ret = -EINVAL;
825 u32 len;
826
827 if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected)
828 goto out;
829
830 trace_dwc3_ctrl_req(ctrl);
831
832 len = le16_to_cpu(ctrl->wLength);
833 if (!len) {
834 dwc->three_stage_setup = false;
835 dwc->ep0_expect_in = false;
836 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
837 } else {
838 dwc->three_stage_setup = true;
839 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
840 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
841 }
842
843 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
844 ret = dwc3_ep0_std_request(dwc, ctrl);
845 else
846 ret = dwc3_ep0_delegate_req(dwc, ctrl);
847
848 if (ret == USB_GADGET_DELAYED_STATUS)
849 dwc->delayed_status = true;
850
851out:
852 if (ret < 0)
853 dwc3_ep0_stall_and_restart(dwc);
854}
855
856static void dwc3_ep0_complete_data(struct dwc3 *dwc,
857 const struct dwc3_event_depevt *event)
858{
859 struct dwc3_request *r;
860 struct usb_request *ur;
861 struct dwc3_trb *trb;
862 struct dwc3_ep *ep0;
863 u32 transferred = 0;
864 u32 status;
865 u32 length;
866 u8 epnum;
867
868 epnum = event->endpoint_number;
869 ep0 = dwc->eps[0];
870
871 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
872 trb = dwc->ep0_trb;
873 trace_dwc3_complete_trb(ep0, trb);
874
875 r = next_request(&ep0->pending_list);
876 if (!r)
877 return;
878
879 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
880 if (status == DWC3_TRBSTS_SETUP_PENDING) {
881 dwc->setup_packet_pending = true;
882 if (r)
883 dwc3_gadget_giveback(ep0, r, -ECONNRESET);
884
885 return;
886 }
887
888 ur = &r->request;
889
890 length = trb->size & DWC3_TRB_SIZE_MASK;
891 transferred = ur->length - length;
892 ur->actual += transferred;
893
894 if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
895 ur->length && ur->zero) || dwc->ep0_bounced) {
896 trb++;
897 trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
898 trace_dwc3_complete_trb(ep0, trb);
899
900 if (r->direction)
901 dwc->eps[1]->trb_enqueue = 0;
902 else
903 dwc->eps[0]->trb_enqueue = 0;
904
905 dwc->ep0_bounced = false;
906 }
907
908 if ((epnum & 1) && ur->actual < ur->length)
909 dwc3_ep0_stall_and_restart(dwc);
910 else
911 dwc3_gadget_giveback(ep0, r, 0);
912}
913
914static void dwc3_ep0_complete_status(struct dwc3 *dwc,
915 const struct dwc3_event_depevt *event)
916{
917 struct dwc3_request *r;
918 struct dwc3_ep *dep;
919 struct dwc3_trb *trb;
920 u32 status;
921
922 dep = dwc->eps[0];
923 trb = dwc->ep0_trb;
924
925 trace_dwc3_complete_trb(dep, trb);
926
927 if (!list_empty(&dep->pending_list)) {
928 r = next_request(&dep->pending_list);
929
930 dwc3_gadget_giveback(dep, r, 0);
931 }
932
933 if (dwc->test_mode) {
934 int ret;
935
936 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
937 if (ret < 0) {
938 dev_err(dwc->dev, "invalid test #%d\n",
939 dwc->test_mode_nr);
940 dwc3_ep0_stall_and_restart(dwc);
941 return;
942 }
943 }
944
945 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
946 if (status == DWC3_TRBSTS_SETUP_PENDING)
947 dwc->setup_packet_pending = true;
948
949 dwc->ep0state = EP0_SETUP_PHASE;
950 dwc3_ep0_out_start(dwc);
951}
952
953static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
954 const struct dwc3_event_depevt *event)
955{
956 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
957
958 dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
959 dep->resource_index = 0;
960 dwc->setup_packet_pending = false;
961
962 switch (dwc->ep0state) {
963 case EP0_SETUP_PHASE:
964 dwc3_ep0_inspect_setup(dwc, event);
965 break;
966
967 case EP0_DATA_PHASE:
968 dwc3_ep0_complete_data(dwc, event);
969 break;
970
971 case EP0_STATUS_PHASE:
972 dwc3_ep0_complete_status(dwc, event);
973 break;
974 default:
975 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
976 }
977}
978
979static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
980 struct dwc3_ep *dep, struct dwc3_request *req)
981{
982 unsigned int trb_length = 0;
983 int ret;
984
985 req->direction = !!dep->number;
986
987 if (req->request.length == 0) {
988 if (!req->direction)
989 trb_length = dep->endpoint.maxpacket;
990
991 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length,
992 DWC3_TRBCTL_CONTROL_DATA, false);
993 ret = dwc3_ep0_start_trans(dep);
994 } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
995 && (dep->number == 0)) {
996 u32 maxpacket;
997 u32 rem;
998
999 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1000 &req->request, dep->number);
1001 if (ret)
1002 return;
1003
1004 maxpacket = dep->endpoint.maxpacket;
1005 rem = req->request.length % maxpacket;
1006 dwc->ep0_bounced = true;
1007
1008 /* prepare normal TRB */
1009 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1010 req->request.length,
1011 DWC3_TRBCTL_CONTROL_DATA,
1012 true);
1013
1014 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
1015
1016 /* Now prepare one extra TRB to align transfer size */
1017 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
1018 maxpacket - rem,
1019 DWC3_TRBCTL_CONTROL_DATA,
1020 false);
1021 ret = dwc3_ep0_start_trans(dep);
1022 } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
1023 req->request.length && req->request.zero) {
1024
1025 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1026 &req->request, dep->number);
1027 if (ret)
1028 return;
1029
1030 /* prepare normal TRB */
1031 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1032 req->request.length,
1033 DWC3_TRBCTL_CONTROL_DATA,
1034 true);
1035
1036 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
1037
1038 if (!req->direction)
1039 trb_length = dep->endpoint.maxpacket;
1040
1041 /* Now prepare one extra TRB to align transfer size */
1042 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
1043 trb_length, DWC3_TRBCTL_CONTROL_DATA,
1044 false);
1045 ret = dwc3_ep0_start_trans(dep);
1046 } else {
1047 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1048 &req->request, dep->number);
1049 if (ret)
1050 return;
1051
1052 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1053 req->request.length, DWC3_TRBCTL_CONTROL_DATA,
1054 false);
1055
1056 req->trb = &dwc->ep0_trb[dep->trb_enqueue];
1057
1058 ret = dwc3_ep0_start_trans(dep);
1059 }
1060
1061 WARN_ON(ret < 0);
1062}
1063
1064static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
1065{
1066 struct dwc3 *dwc = dep->dwc;
1067 u32 type;
1068
1069 type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
1070 : DWC3_TRBCTL_CONTROL_STATUS2;
1071
1072 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false);
1073 return dwc3_ep0_start_trans(dep);
1074}
1075
1076static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
1077{
1078 WARN_ON(dwc3_ep0_start_control_status(dep));
1079}
1080
1081static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
1082 const struct dwc3_event_depevt *event)
1083{
1084 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1085
1086 __dwc3_ep0_do_control_status(dwc, dep);
1087}
1088
1089void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
1090{
1091 unsigned int direction = !dwc->ep0_expect_in;
1092
1093 dwc->delayed_status = false;
1094 dwc->clear_stall_protocol = 0;
1095
1096 if (dwc->ep0state != EP0_STATUS_PHASE)
1097 return;
1098
1099 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
1100}
1101
1102void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
1103{
1104 struct dwc3_gadget_ep_cmd_params params;
1105 u32 cmd;
1106 int ret;
1107
1108 /*
1109 * For status/DATA OUT stage, TRB will be queued on ep0 out
1110 * endpoint for which resource index is zero. Hence allow
1111 * queuing ENDXFER command for ep0 out endpoint.
1112 */
1113 if (!dep->resource_index && dep->number)
1114 return;
1115
1116 cmd = DWC3_DEPCMD_ENDTRANSFER;
1117 cmd |= DWC3_DEPCMD_CMDIOC;
1118 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1119 memset(¶ms, 0, sizeof(params));
1120 ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
1121 WARN_ON_ONCE(ret);
1122 dep->resource_index = 0;
1123}
1124
1125static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
1126 const struct dwc3_event_depevt *event)
1127{
1128 switch (event->status) {
1129 case DEPEVT_STATUS_CONTROL_DATA:
1130 if (!dwc->softconnect || !dwc->connected)
1131 return;
1132 /*
1133 * We already have a DATA transfer in the controller's cache,
1134 * if we receive a XferNotReady(DATA) we will ignore it, unless
1135 * it's for the wrong direction.
1136 *
1137 * In that case, we must issue END_TRANSFER command to the Data
1138 * Phase we already have started and issue SetStall on the
1139 * control endpoint.
1140 */
1141 if (dwc->ep0_expect_in != event->endpoint_number) {
1142 struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in];
1143
1144 dev_err(dwc->dev, "unexpected direction for Data Phase\n");
1145 dwc3_ep0_end_control_data(dwc, dep);
1146 dwc3_ep0_stall_and_restart(dwc);
1147 return;
1148 }
1149
1150 break;
1151
1152 case DEPEVT_STATUS_CONTROL_STATUS:
1153 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
1154 return;
1155
1156 if (dwc->setup_packet_pending) {
1157 dwc3_ep0_stall_and_restart(dwc);
1158 return;
1159 }
1160
1161 dwc->ep0state = EP0_STATUS_PHASE;
1162
1163 if (dwc->delayed_status) {
1164 struct dwc3_ep *dep = dwc->eps[0];
1165
1166 WARN_ON_ONCE(event->endpoint_number != 1);
1167 /*
1168 * We should handle the delay STATUS phase here if the
1169 * request for handling delay STATUS has been queued
1170 * into the list.
1171 */
1172 if (!list_empty(&dep->pending_list)) {
1173 dwc->delayed_status = false;
1174 usb_gadget_set_state(dwc->gadget,
1175 USB_STATE_CONFIGURED);
1176 dwc3_ep0_do_control_status(dwc, event);
1177 }
1178
1179 return;
1180 }
1181
1182 dwc3_ep0_do_control_status(dwc, event);
1183 }
1184}
1185
1186void dwc3_ep0_interrupt(struct dwc3 *dwc,
1187 const struct dwc3_event_depevt *event)
1188{
1189 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1190 u8 cmd;
1191
1192 switch (event->endpoint_event) {
1193 case DWC3_DEPEVT_XFERCOMPLETE:
1194 dwc3_ep0_xfer_complete(dwc, event);
1195 break;
1196
1197 case DWC3_DEPEVT_XFERNOTREADY:
1198 dwc3_ep0_xfernotready(dwc, event);
1199 break;
1200
1201 case DWC3_DEPEVT_XFERINPROGRESS:
1202 case DWC3_DEPEVT_RXTXFIFOEVT:
1203 case DWC3_DEPEVT_STREAMEVT:
1204 break;
1205 case DWC3_DEPEVT_EPCMDCMPLT:
1206 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
1207
1208 if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
1209 dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
1210 dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
1211 }
1212 break;
1213 default:
1214 dev_err(dwc->dev, "unknown endpoint event %d\n", event->endpoint_event);
1215 break;
1216 }
1217}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
4 *
5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
6 *
7 * Authors: Felipe Balbi <balbi@ti.com>,
8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 */
10
11#include <linux/kernel.h>
12#include <linux/slab.h>
13#include <linux/spinlock.h>
14#include <linux/platform_device.h>
15#include <linux/pm_runtime.h>
16#include <linux/interrupt.h>
17#include <linux/io.h>
18#include <linux/list.h>
19#include <linux/dma-mapping.h>
20
21#include <linux/usb/ch9.h>
22#include <linux/usb/gadget.h>
23#include <linux/usb/composite.h>
24
25#include "core.h"
26#include "debug.h"
27#include "gadget.h"
28#include "io.h"
29
30static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
31static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
32 struct dwc3_ep *dep, struct dwc3_request *req);
33
34static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
35 dma_addr_t buf_dma, u32 len, u32 type, bool chain)
36{
37 struct dwc3_trb *trb;
38 struct dwc3 *dwc;
39
40 dwc = dep->dwc;
41 trb = &dwc->ep0_trb[dep->trb_enqueue];
42
43 if (chain)
44 dep->trb_enqueue++;
45
46 trb->bpl = lower_32_bits(buf_dma);
47 trb->bph = upper_32_bits(buf_dma);
48 trb->size = len;
49 trb->ctrl = type;
50
51 trb->ctrl |= (DWC3_TRB_CTRL_HWO
52 | DWC3_TRB_CTRL_ISP_IMI);
53
54 if (chain)
55 trb->ctrl |= DWC3_TRB_CTRL_CHN;
56 else
57 trb->ctrl |= (DWC3_TRB_CTRL_IOC
58 | DWC3_TRB_CTRL_LST);
59
60 trace_dwc3_prepare_trb(dep, trb);
61}
62
63static int dwc3_ep0_start_trans(struct dwc3_ep *dep)
64{
65 struct dwc3_gadget_ep_cmd_params params;
66 struct dwc3 *dwc;
67 int ret;
68
69 if (dep->flags & DWC3_EP_TRANSFER_STARTED)
70 return 0;
71
72 dwc = dep->dwc;
73
74 memset(¶ms, 0, sizeof(params));
75 params.param0 = upper_32_bits(dwc->ep0_trb_addr);
76 params.param1 = lower_32_bits(dwc->ep0_trb_addr);
77
78 ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms);
79 if (ret < 0)
80 return ret;
81
82 dwc->ep0_next_event = DWC3_EP0_COMPLETE;
83
84 return 0;
85}
86
87static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
88 struct dwc3_request *req)
89{
90 struct dwc3 *dwc = dep->dwc;
91
92 req->request.actual = 0;
93 req->request.status = -EINPROGRESS;
94 req->epnum = dep->number;
95
96 list_add_tail(&req->list, &dep->pending_list);
97
98 /*
99 * Gadget driver might not be quick enough to queue a request
100 * before we get a Transfer Not Ready event on this endpoint.
101 *
102 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
103 * flag is set, it's telling us that as soon as Gadget queues the
104 * required request, we should kick the transfer here because the
105 * IRQ we were waiting for is long gone.
106 */
107 if (dep->flags & DWC3_EP_PENDING_REQUEST) {
108 unsigned int direction;
109
110 direction = !!(dep->flags & DWC3_EP0_DIR_IN);
111
112 if (dwc->ep0state != EP0_DATA_PHASE) {
113 dev_WARN(dwc->dev, "Unexpected pending request\n");
114 return 0;
115 }
116
117 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
118
119 dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
120 DWC3_EP0_DIR_IN);
121
122 return 0;
123 }
124
125 /*
126 * In case gadget driver asked us to delay the STATUS phase,
127 * handle it here.
128 */
129 if (dwc->delayed_status) {
130 unsigned int direction;
131
132 direction = !dwc->ep0_expect_in;
133 dwc->delayed_status = false;
134 usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
135
136 if (dwc->ep0state == EP0_STATUS_PHASE)
137 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
138
139 return 0;
140 }
141
142 /*
143 * Unfortunately we have uncovered a limitation wrt the Data Phase.
144 *
145 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
146 * come before issueing Start Transfer command, but if we do, we will
147 * miss situations where the host starts another SETUP phase instead of
148 * the DATA phase. Such cases happen at least on TD.7.6 of the Link
149 * Layer Compliance Suite.
150 *
151 * The problem surfaces due to the fact that in case of back-to-back
152 * SETUP packets there will be no XferNotReady(DATA) generated and we
153 * will be stuck waiting for XferNotReady(DATA) forever.
154 *
155 * By looking at tables 9-13 and 9-14 of the Databook, we can see that
156 * it tells us to start Data Phase right away. It also mentions that if
157 * we receive a SETUP phase instead of the DATA phase, core will issue
158 * XferComplete for the DATA phase, before actually initiating it in
159 * the wire, with the TRB's status set to "SETUP_PENDING". Such status
160 * can only be used to print some debugging logs, as the core expects
161 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
162 * just so it completes right away, without transferring anything and,
163 * only then, we can go back to the SETUP phase.
164 *
165 * Because of this scenario, SNPS decided to change the programming
166 * model of control transfers and support on-demand transfers only for
167 * the STATUS phase. To fix the issue we have now, we will always wait
168 * for gadget driver to queue the DATA phase's struct usb_request, then
169 * start it right away.
170 *
171 * If we're actually in a 2-stage transfer, we will wait for
172 * XferNotReady(STATUS).
173 */
174 if (dwc->three_stage_setup) {
175 unsigned int direction;
176
177 direction = dwc->ep0_expect_in;
178 dwc->ep0state = EP0_DATA_PHASE;
179
180 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
181
182 dep->flags &= ~DWC3_EP0_DIR_IN;
183 }
184
185 return 0;
186}
187
188int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
189 gfp_t gfp_flags)
190{
191 struct dwc3_request *req = to_dwc3_request(request);
192 struct dwc3_ep *dep = to_dwc3_ep(ep);
193 struct dwc3 *dwc = dep->dwc;
194
195 unsigned long flags;
196
197 int ret;
198
199 spin_lock_irqsave(&dwc->lock, flags);
200 if (!dep->endpoint.desc || !dwc->pullups_connected) {
201 dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
202 dep->name);
203 ret = -ESHUTDOWN;
204 goto out;
205 }
206
207 /* we share one TRB for ep0/1 */
208 if (!list_empty(&dep->pending_list)) {
209 ret = -EBUSY;
210 goto out;
211 }
212
213 ret = __dwc3_gadget_ep0_queue(dep, req);
214
215out:
216 spin_unlock_irqrestore(&dwc->lock, flags);
217
218 return ret;
219}
220
221static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
222{
223 struct dwc3_ep *dep;
224
225 /* reinitialize physical ep1 */
226 dep = dwc->eps[1];
227 dep->flags = DWC3_EP_ENABLED;
228
229 /* stall is always issued on EP0 */
230 dep = dwc->eps[0];
231 __dwc3_gadget_ep_set_halt(dep, 1, false);
232 dep->flags = DWC3_EP_ENABLED;
233 dwc->delayed_status = false;
234
235 if (!list_empty(&dep->pending_list)) {
236 struct dwc3_request *req;
237
238 req = next_request(&dep->pending_list);
239 dwc3_gadget_giveback(dep, req, -ECONNRESET);
240 }
241
242 dwc->ep0state = EP0_SETUP_PHASE;
243 dwc3_ep0_out_start(dwc);
244}
245
246int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
247{
248 struct dwc3_ep *dep = to_dwc3_ep(ep);
249 struct dwc3 *dwc = dep->dwc;
250
251 dwc3_ep0_stall_and_restart(dwc);
252
253 return 0;
254}
255
256int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
257{
258 struct dwc3_ep *dep = to_dwc3_ep(ep);
259 struct dwc3 *dwc = dep->dwc;
260 unsigned long flags;
261 int ret;
262
263 spin_lock_irqsave(&dwc->lock, flags);
264 ret = __dwc3_gadget_ep0_set_halt(ep, value);
265 spin_unlock_irqrestore(&dwc->lock, flags);
266
267 return ret;
268}
269
270void dwc3_ep0_out_start(struct dwc3 *dwc)
271{
272 struct dwc3_ep *dep;
273 int ret;
274
275 complete(&dwc->ep0_in_setup);
276
277 dep = dwc->eps[0];
278 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8,
279 DWC3_TRBCTL_CONTROL_SETUP, false);
280 ret = dwc3_ep0_start_trans(dep);
281 WARN_ON(ret < 0);
282}
283
284static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
285{
286 struct dwc3_ep *dep;
287 u32 windex = le16_to_cpu(wIndex_le);
288 u32 epnum;
289
290 epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
291 if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
292 epnum |= 1;
293
294 dep = dwc->eps[epnum];
295 if (dep == NULL)
296 return NULL;
297
298 if (dep->flags & DWC3_EP_ENABLED)
299 return dep;
300
301 return NULL;
302}
303
304static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
305{
306}
307/*
308 * ch 9.4.5
309 */
310static int dwc3_ep0_handle_status(struct dwc3 *dwc,
311 struct usb_ctrlrequest *ctrl)
312{
313 struct dwc3_ep *dep;
314 u32 recip;
315 u32 value;
316 u32 reg;
317 u16 usb_status = 0;
318 __le16 *response_pkt;
319
320 /* We don't support PTM_STATUS */
321 value = le16_to_cpu(ctrl->wValue);
322 if (value != 0)
323 return -EINVAL;
324
325 recip = ctrl->bRequestType & USB_RECIP_MASK;
326 switch (recip) {
327 case USB_RECIP_DEVICE:
328 /*
329 * LTM will be set once we know how to set this in HW.
330 */
331 usb_status |= dwc->gadget->is_selfpowered;
332
333 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
334 (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
335 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
336 if (reg & DWC3_DCTL_INITU1ENA)
337 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
338 if (reg & DWC3_DCTL_INITU2ENA)
339 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
340 }
341
342 break;
343
344 case USB_RECIP_INTERFACE:
345 /*
346 * Function Remote Wake Capable D0
347 * Function Remote Wakeup D1
348 */
349 break;
350
351 case USB_RECIP_ENDPOINT:
352 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
353 if (!dep)
354 return -EINVAL;
355
356 if (dep->flags & DWC3_EP_STALL)
357 usb_status = 1 << USB_ENDPOINT_HALT;
358 break;
359 default:
360 return -EINVAL;
361 }
362
363 response_pkt = (__le16 *) dwc->setup_buf;
364 *response_pkt = cpu_to_le16(usb_status);
365
366 dep = dwc->eps[0];
367 dwc->ep0_usb_req.dep = dep;
368 dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
369 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
370 dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
371
372 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
373}
374
375static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,
376 int set)
377{
378 u32 reg;
379
380 if (state != USB_STATE_CONFIGURED)
381 return -EINVAL;
382 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
383 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
384 return -EINVAL;
385 if (set && dwc->dis_u1_entry_quirk)
386 return -EINVAL;
387
388 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
389 if (set)
390 reg |= DWC3_DCTL_INITU1ENA;
391 else
392 reg &= ~DWC3_DCTL_INITU1ENA;
393 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
394
395 return 0;
396}
397
398static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,
399 int set)
400{
401 u32 reg;
402
403
404 if (state != USB_STATE_CONFIGURED)
405 return -EINVAL;
406 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
407 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
408 return -EINVAL;
409 if (set && dwc->dis_u2_entry_quirk)
410 return -EINVAL;
411
412 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
413 if (set)
414 reg |= DWC3_DCTL_INITU2ENA;
415 else
416 reg &= ~DWC3_DCTL_INITU2ENA;
417 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
418
419 return 0;
420}
421
422static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state,
423 u32 wIndex, int set)
424{
425 if ((wIndex & 0xff) != 0)
426 return -EINVAL;
427 if (!set)
428 return -EINVAL;
429
430 switch (wIndex >> 8) {
431 case USB_TEST_J:
432 case USB_TEST_K:
433 case USB_TEST_SE0_NAK:
434 case USB_TEST_PACKET:
435 case USB_TEST_FORCE_ENABLE:
436 dwc->test_mode_nr = wIndex >> 8;
437 dwc->test_mode = true;
438 break;
439 default:
440 return -EINVAL;
441 }
442
443 return 0;
444}
445
446static int dwc3_ep0_handle_device(struct dwc3 *dwc,
447 struct usb_ctrlrequest *ctrl, int set)
448{
449 enum usb_device_state state;
450 u32 wValue;
451 u32 wIndex;
452 int ret = 0;
453
454 wValue = le16_to_cpu(ctrl->wValue);
455 wIndex = le16_to_cpu(ctrl->wIndex);
456 state = dwc->gadget->state;
457
458 switch (wValue) {
459 case USB_DEVICE_REMOTE_WAKEUP:
460 break;
461 /*
462 * 9.4.1 says only only for SS, in AddressState only for
463 * default control pipe
464 */
465 case USB_DEVICE_U1_ENABLE:
466 ret = dwc3_ep0_handle_u1(dwc, state, set);
467 break;
468 case USB_DEVICE_U2_ENABLE:
469 ret = dwc3_ep0_handle_u2(dwc, state, set);
470 break;
471 case USB_DEVICE_LTM_ENABLE:
472 ret = -EINVAL;
473 break;
474 case USB_DEVICE_TEST_MODE:
475 ret = dwc3_ep0_handle_test(dwc, state, wIndex, set);
476 break;
477 default:
478 ret = -EINVAL;
479 }
480
481 return ret;
482}
483
484static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
485 struct usb_ctrlrequest *ctrl, int set)
486{
487 u32 wValue;
488 int ret = 0;
489
490 wValue = le16_to_cpu(ctrl->wValue);
491
492 switch (wValue) {
493 case USB_INTRF_FUNC_SUSPEND:
494 /*
495 * REVISIT: Ideally we would enable some low power mode here,
496 * however it's unclear what we should be doing here.
497 *
498 * For now, we're not doing anything, just making sure we return
499 * 0 so USB Command Verifier tests pass without any errors.
500 */
501 break;
502 default:
503 ret = -EINVAL;
504 }
505
506 return ret;
507}
508
509static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
510 struct usb_ctrlrequest *ctrl, int set)
511{
512 struct dwc3_ep *dep;
513 u32 wValue;
514 int ret;
515
516 wValue = le16_to_cpu(ctrl->wValue);
517
518 switch (wValue) {
519 case USB_ENDPOINT_HALT:
520 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
521 if (!dep)
522 return -EINVAL;
523
524 if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
525 break;
526
527 ret = __dwc3_gadget_ep_set_halt(dep, set, true);
528 if (ret)
529 return -EINVAL;
530
531 /* ClearFeature(Halt) may need delayed status */
532 if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
533 return USB_GADGET_DELAYED_STATUS;
534
535 break;
536 default:
537 return -EINVAL;
538 }
539
540 return 0;
541}
542
543static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
544 struct usb_ctrlrequest *ctrl, int set)
545{
546 u32 recip;
547 int ret;
548
549 recip = ctrl->bRequestType & USB_RECIP_MASK;
550
551 switch (recip) {
552 case USB_RECIP_DEVICE:
553 ret = dwc3_ep0_handle_device(dwc, ctrl, set);
554 break;
555 case USB_RECIP_INTERFACE:
556 ret = dwc3_ep0_handle_intf(dwc, ctrl, set);
557 break;
558 case USB_RECIP_ENDPOINT:
559 ret = dwc3_ep0_handle_endpoint(dwc, ctrl, set);
560 break;
561 default:
562 ret = -EINVAL;
563 }
564
565 return ret;
566}
567
568static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
569{
570 enum usb_device_state state = dwc->gadget->state;
571 u32 addr;
572 u32 reg;
573
574 addr = le16_to_cpu(ctrl->wValue);
575 if (addr > 127) {
576 dev_err(dwc->dev, "invalid device address %d\n", addr);
577 return -EINVAL;
578 }
579
580 if (state == USB_STATE_CONFIGURED) {
581 dev_err(dwc->dev, "can't SetAddress() from Configured State\n");
582 return -EINVAL;
583 }
584
585 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
586 reg &= ~(DWC3_DCFG_DEVADDR_MASK);
587 reg |= DWC3_DCFG_DEVADDR(addr);
588 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
589
590 if (addr)
591 usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
592 else
593 usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
594
595 return 0;
596}
597
598static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
599{
600 int ret = -EINVAL;
601
602 if (dwc->async_callbacks) {
603 spin_unlock(&dwc->lock);
604 ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
605 spin_lock(&dwc->lock);
606 }
607 return ret;
608}
609
610static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
611{
612 enum usb_device_state state = dwc->gadget->state;
613 u32 cfg;
614 int ret;
615 u32 reg;
616
617 cfg = le16_to_cpu(ctrl->wValue);
618
619 switch (state) {
620 case USB_STATE_DEFAULT:
621 return -EINVAL;
622
623 case USB_STATE_ADDRESS:
624 ret = dwc3_ep0_delegate_req(dwc, ctrl);
625 /* if the cfg matches and the cfg is non zero */
626 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
627
628 /*
629 * only change state if set_config has already
630 * been processed. If gadget driver returns
631 * USB_GADGET_DELAYED_STATUS, we will wait
632 * to change the state on the next usb_ep_queue()
633 */
634 if (ret == 0)
635 usb_gadget_set_state(dwc->gadget,
636 USB_STATE_CONFIGURED);
637
638 /*
639 * Enable transition to U1/U2 state when
640 * nothing is pending from application.
641 */
642 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
643 if (!dwc->dis_u1_entry_quirk)
644 reg |= DWC3_DCTL_ACCEPTU1ENA;
645 if (!dwc->dis_u2_entry_quirk)
646 reg |= DWC3_DCTL_ACCEPTU2ENA;
647 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
648 }
649 break;
650
651 case USB_STATE_CONFIGURED:
652 ret = dwc3_ep0_delegate_req(dwc, ctrl);
653 if (!cfg && !ret)
654 usb_gadget_set_state(dwc->gadget,
655 USB_STATE_ADDRESS);
656 break;
657 default:
658 ret = -EINVAL;
659 }
660 return ret;
661}
662
663static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
664{
665 struct dwc3_ep *dep = to_dwc3_ep(ep);
666 struct dwc3 *dwc = dep->dwc;
667
668 u32 param = 0;
669 u32 reg;
670
671 struct timing {
672 u8 u1sel;
673 u8 u1pel;
674 __le16 u2sel;
675 __le16 u2pel;
676 } __packed timing;
677
678 int ret;
679
680 memcpy(&timing, req->buf, sizeof(timing));
681
682 dwc->u1sel = timing.u1sel;
683 dwc->u1pel = timing.u1pel;
684 dwc->u2sel = le16_to_cpu(timing.u2sel);
685 dwc->u2pel = le16_to_cpu(timing.u2pel);
686
687 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
688 if (reg & DWC3_DCTL_INITU2ENA)
689 param = dwc->u2pel;
690 if (reg & DWC3_DCTL_INITU1ENA)
691 param = dwc->u1pel;
692
693 /*
694 * According to Synopsys Databook, if parameter is
695 * greater than 125, a value of zero should be
696 * programmed in the register.
697 */
698 if (param > 125)
699 param = 0;
700
701 /* now that we have the time, issue DGCMD Set Sel */
702 ret = dwc3_send_gadget_generic_command(dwc,
703 DWC3_DGCMD_SET_PERIODIC_PAR, param);
704 WARN_ON(ret < 0);
705}
706
707static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
708{
709 struct dwc3_ep *dep;
710 enum usb_device_state state = dwc->gadget->state;
711 u16 wLength;
712
713 if (state == USB_STATE_DEFAULT)
714 return -EINVAL;
715
716 wLength = le16_to_cpu(ctrl->wLength);
717
718 if (wLength != 6) {
719 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
720 wLength);
721 return -EINVAL;
722 }
723
724 /*
725 * To handle Set SEL we need to receive 6 bytes from Host. So let's
726 * queue a usb_request for 6 bytes.
727 *
728 * Remember, though, this controller can't handle non-wMaxPacketSize
729 * aligned transfers on the OUT direction, so we queue a request for
730 * wMaxPacketSize instead.
731 */
732 dep = dwc->eps[0];
733 dwc->ep0_usb_req.dep = dep;
734 dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
735 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
736 dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
737
738 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
739}
740
741static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
742{
743 u16 wLength;
744 u16 wValue;
745 u16 wIndex;
746
747 wValue = le16_to_cpu(ctrl->wValue);
748 wLength = le16_to_cpu(ctrl->wLength);
749 wIndex = le16_to_cpu(ctrl->wIndex);
750
751 if (wIndex || wLength)
752 return -EINVAL;
753
754 dwc->gadget->isoch_delay = wValue;
755
756 return 0;
757}
758
759static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
760{
761 int ret;
762
763 switch (ctrl->bRequest) {
764 case USB_REQ_GET_STATUS:
765 ret = dwc3_ep0_handle_status(dwc, ctrl);
766 break;
767 case USB_REQ_CLEAR_FEATURE:
768 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
769 break;
770 case USB_REQ_SET_FEATURE:
771 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
772 break;
773 case USB_REQ_SET_ADDRESS:
774 ret = dwc3_ep0_set_address(dwc, ctrl);
775 break;
776 case USB_REQ_SET_CONFIGURATION:
777 ret = dwc3_ep0_set_config(dwc, ctrl);
778 break;
779 case USB_REQ_SET_SEL:
780 ret = dwc3_ep0_set_sel(dwc, ctrl);
781 break;
782 case USB_REQ_SET_ISOCH_DELAY:
783 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
784 break;
785 default:
786 ret = dwc3_ep0_delegate_req(dwc, ctrl);
787 break;
788 }
789
790 return ret;
791}
792
793static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
794 const struct dwc3_event_depevt *event)
795{
796 struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb;
797 int ret = -EINVAL;
798 u32 len;
799
800 if (!dwc->gadget_driver)
801 goto out;
802
803 trace_dwc3_ctrl_req(ctrl);
804
805 len = le16_to_cpu(ctrl->wLength);
806 if (!len) {
807 dwc->three_stage_setup = false;
808 dwc->ep0_expect_in = false;
809 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
810 } else {
811 dwc->three_stage_setup = true;
812 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
813 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
814 }
815
816 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
817 ret = dwc3_ep0_std_request(dwc, ctrl);
818 else
819 ret = dwc3_ep0_delegate_req(dwc, ctrl);
820
821 if (ret == USB_GADGET_DELAYED_STATUS)
822 dwc->delayed_status = true;
823
824out:
825 if (ret < 0)
826 dwc3_ep0_stall_and_restart(dwc);
827}
828
829static void dwc3_ep0_complete_data(struct dwc3 *dwc,
830 const struct dwc3_event_depevt *event)
831{
832 struct dwc3_request *r;
833 struct usb_request *ur;
834 struct dwc3_trb *trb;
835 struct dwc3_ep *ep0;
836 u32 transferred = 0;
837 u32 status;
838 u32 length;
839 u8 epnum;
840
841 epnum = event->endpoint_number;
842 ep0 = dwc->eps[0];
843
844 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
845 trb = dwc->ep0_trb;
846 trace_dwc3_complete_trb(ep0, trb);
847
848 r = next_request(&ep0->pending_list);
849 if (!r)
850 return;
851
852 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
853 if (status == DWC3_TRBSTS_SETUP_PENDING) {
854 dwc->setup_packet_pending = true;
855 if (r)
856 dwc3_gadget_giveback(ep0, r, -ECONNRESET);
857
858 return;
859 }
860
861 ur = &r->request;
862
863 length = trb->size & DWC3_TRB_SIZE_MASK;
864 transferred = ur->length - length;
865 ur->actual += transferred;
866
867 if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
868 ur->length && ur->zero) || dwc->ep0_bounced) {
869 trb++;
870 trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
871 trace_dwc3_complete_trb(ep0, trb);
872
873 if (r->direction)
874 dwc->eps[1]->trb_enqueue = 0;
875 else
876 dwc->eps[0]->trb_enqueue = 0;
877
878 dwc->ep0_bounced = false;
879 }
880
881 if ((epnum & 1) && ur->actual < ur->length)
882 dwc3_ep0_stall_and_restart(dwc);
883 else
884 dwc3_gadget_giveback(ep0, r, 0);
885}
886
887static void dwc3_ep0_complete_status(struct dwc3 *dwc,
888 const struct dwc3_event_depevt *event)
889{
890 struct dwc3_request *r;
891 struct dwc3_ep *dep;
892 struct dwc3_trb *trb;
893 u32 status;
894
895 dep = dwc->eps[0];
896 trb = dwc->ep0_trb;
897
898 trace_dwc3_complete_trb(dep, trb);
899
900 if (!list_empty(&dep->pending_list)) {
901 r = next_request(&dep->pending_list);
902
903 dwc3_gadget_giveback(dep, r, 0);
904 }
905
906 if (dwc->test_mode) {
907 int ret;
908
909 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
910 if (ret < 0) {
911 dev_err(dwc->dev, "invalid test #%d\n",
912 dwc->test_mode_nr);
913 dwc3_ep0_stall_and_restart(dwc);
914 return;
915 }
916 }
917
918 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
919 if (status == DWC3_TRBSTS_SETUP_PENDING)
920 dwc->setup_packet_pending = true;
921
922 dwc->ep0state = EP0_SETUP_PHASE;
923 dwc3_ep0_out_start(dwc);
924}
925
926static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
927 const struct dwc3_event_depevt *event)
928{
929 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
930
931 dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
932 dep->resource_index = 0;
933 dwc->setup_packet_pending = false;
934
935 switch (dwc->ep0state) {
936 case EP0_SETUP_PHASE:
937 dwc3_ep0_inspect_setup(dwc, event);
938 break;
939
940 case EP0_DATA_PHASE:
941 dwc3_ep0_complete_data(dwc, event);
942 break;
943
944 case EP0_STATUS_PHASE:
945 dwc3_ep0_complete_status(dwc, event);
946 break;
947 default:
948 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
949 }
950}
951
952static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
953 struct dwc3_ep *dep, struct dwc3_request *req)
954{
955 unsigned int trb_length = 0;
956 int ret;
957
958 req->direction = !!dep->number;
959
960 if (req->request.length == 0) {
961 if (!req->direction)
962 trb_length = dep->endpoint.maxpacket;
963
964 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length,
965 DWC3_TRBCTL_CONTROL_DATA, false);
966 ret = dwc3_ep0_start_trans(dep);
967 } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
968 && (dep->number == 0)) {
969 u32 maxpacket;
970 u32 rem;
971
972 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
973 &req->request, dep->number);
974 if (ret)
975 return;
976
977 maxpacket = dep->endpoint.maxpacket;
978 rem = req->request.length % maxpacket;
979 dwc->ep0_bounced = true;
980
981 /* prepare normal TRB */
982 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
983 req->request.length,
984 DWC3_TRBCTL_CONTROL_DATA,
985 true);
986
987 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
988
989 /* Now prepare one extra TRB to align transfer size */
990 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
991 maxpacket - rem,
992 DWC3_TRBCTL_CONTROL_DATA,
993 false);
994 ret = dwc3_ep0_start_trans(dep);
995 } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
996 req->request.length && req->request.zero) {
997
998 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
999 &req->request, dep->number);
1000 if (ret)
1001 return;
1002
1003 /* prepare normal TRB */
1004 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1005 req->request.length,
1006 DWC3_TRBCTL_CONTROL_DATA,
1007 true);
1008
1009 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
1010
1011 if (!req->direction)
1012 trb_length = dep->endpoint.maxpacket;
1013
1014 /* Now prepare one extra TRB to align transfer size */
1015 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
1016 trb_length, DWC3_TRBCTL_CONTROL_DATA,
1017 false);
1018 ret = dwc3_ep0_start_trans(dep);
1019 } else {
1020 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1021 &req->request, dep->number);
1022 if (ret)
1023 return;
1024
1025 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1026 req->request.length, DWC3_TRBCTL_CONTROL_DATA,
1027 false);
1028
1029 req->trb = &dwc->ep0_trb[dep->trb_enqueue];
1030
1031 ret = dwc3_ep0_start_trans(dep);
1032 }
1033
1034 WARN_ON(ret < 0);
1035}
1036
1037static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
1038{
1039 struct dwc3 *dwc = dep->dwc;
1040 u32 type;
1041
1042 type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
1043 : DWC3_TRBCTL_CONTROL_STATUS2;
1044
1045 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false);
1046 return dwc3_ep0_start_trans(dep);
1047}
1048
1049static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
1050{
1051 WARN_ON(dwc3_ep0_start_control_status(dep));
1052}
1053
1054static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
1055 const struct dwc3_event_depevt *event)
1056{
1057 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1058
1059 __dwc3_ep0_do_control_status(dwc, dep);
1060}
1061
1062void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
1063{
1064 unsigned int direction = !dwc->ep0_expect_in;
1065
1066 dwc->delayed_status = false;
1067
1068 if (dwc->ep0state != EP0_STATUS_PHASE)
1069 return;
1070
1071 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
1072}
1073
1074static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
1075{
1076 struct dwc3_gadget_ep_cmd_params params;
1077 u32 cmd;
1078 int ret;
1079
1080 if (!dep->resource_index)
1081 return;
1082
1083 cmd = DWC3_DEPCMD_ENDTRANSFER;
1084 cmd |= DWC3_DEPCMD_CMDIOC;
1085 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1086 memset(¶ms, 0, sizeof(params));
1087 ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
1088 WARN_ON_ONCE(ret);
1089 dep->resource_index = 0;
1090}
1091
1092static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
1093 const struct dwc3_event_depevt *event)
1094{
1095 switch (event->status) {
1096 case DEPEVT_STATUS_CONTROL_DATA:
1097 /*
1098 * We already have a DATA transfer in the controller's cache,
1099 * if we receive a XferNotReady(DATA) we will ignore it, unless
1100 * it's for the wrong direction.
1101 *
1102 * In that case, we must issue END_TRANSFER command to the Data
1103 * Phase we already have started and issue SetStall on the
1104 * control endpoint.
1105 */
1106 if (dwc->ep0_expect_in != event->endpoint_number) {
1107 struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in];
1108
1109 dev_err(dwc->dev, "unexpected direction for Data Phase\n");
1110 dwc3_ep0_end_control_data(dwc, dep);
1111 dwc3_ep0_stall_and_restart(dwc);
1112 return;
1113 }
1114
1115 break;
1116
1117 case DEPEVT_STATUS_CONTROL_STATUS:
1118 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
1119 return;
1120
1121 dwc->ep0state = EP0_STATUS_PHASE;
1122
1123 if (dwc->delayed_status) {
1124 struct dwc3_ep *dep = dwc->eps[0];
1125
1126 WARN_ON_ONCE(event->endpoint_number != 1);
1127 /*
1128 * We should handle the delay STATUS phase here if the
1129 * request for handling delay STATUS has been queued
1130 * into the list.
1131 */
1132 if (!list_empty(&dep->pending_list)) {
1133 dwc->delayed_status = false;
1134 usb_gadget_set_state(dwc->gadget,
1135 USB_STATE_CONFIGURED);
1136 dwc3_ep0_do_control_status(dwc, event);
1137 }
1138
1139 return;
1140 }
1141
1142 dwc3_ep0_do_control_status(dwc, event);
1143 }
1144}
1145
1146void dwc3_ep0_interrupt(struct dwc3 *dwc,
1147 const struct dwc3_event_depevt *event)
1148{
1149 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1150 u8 cmd;
1151
1152 switch (event->endpoint_event) {
1153 case DWC3_DEPEVT_XFERCOMPLETE:
1154 dwc3_ep0_xfer_complete(dwc, event);
1155 break;
1156
1157 case DWC3_DEPEVT_XFERNOTREADY:
1158 dwc3_ep0_xfernotready(dwc, event);
1159 break;
1160
1161 case DWC3_DEPEVT_XFERINPROGRESS:
1162 case DWC3_DEPEVT_RXTXFIFOEVT:
1163 case DWC3_DEPEVT_STREAMEVT:
1164 break;
1165 case DWC3_DEPEVT_EPCMDCMPLT:
1166 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
1167
1168 if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
1169 dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
1170 dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
1171 }
1172 break;
1173 }
1174}