Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
4 *
5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
6 *
7 * Authors: Felipe Balbi <balbi@ti.com>,
8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 */
10
11#include <linux/kernel.h>
12#include <linux/slab.h>
13#include <linux/spinlock.h>
14#include <linux/platform_device.h>
15#include <linux/pm_runtime.h>
16#include <linux/interrupt.h>
17#include <linux/io.h>
18#include <linux/list.h>
19#include <linux/dma-mapping.h>
20
21#include <linux/usb/ch9.h>
22#include <linux/usb/gadget.h>
23#include <linux/usb/composite.h>
24
25#include "core.h"
26#include "debug.h"
27#include "gadget.h"
28#include "io.h"
29
30static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
31static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
32 struct dwc3_ep *dep, struct dwc3_request *req);
33static int dwc3_ep0_delegate_req(struct dwc3 *dwc,
34 struct usb_ctrlrequest *ctrl);
35
36static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
37 dma_addr_t buf_dma, u32 len, u32 type, bool chain)
38{
39 struct dwc3_trb *trb;
40 struct dwc3 *dwc;
41
42 dwc = dep->dwc;
43 trb = &dwc->ep0_trb[dep->trb_enqueue];
44
45 if (chain)
46 dep->trb_enqueue++;
47
48 trb->bpl = lower_32_bits(buf_dma);
49 trb->bph = upper_32_bits(buf_dma);
50 trb->size = len;
51 trb->ctrl = type;
52
53 trb->ctrl |= (DWC3_TRB_CTRL_HWO
54 | DWC3_TRB_CTRL_ISP_IMI);
55
56 if (chain)
57 trb->ctrl |= DWC3_TRB_CTRL_CHN;
58 else
59 trb->ctrl |= (DWC3_TRB_CTRL_IOC
60 | DWC3_TRB_CTRL_LST);
61
62 trace_dwc3_prepare_trb(dep, trb);
63}
64
65static int dwc3_ep0_start_trans(struct dwc3_ep *dep)
66{
67 struct dwc3_gadget_ep_cmd_params params;
68 struct dwc3 *dwc;
69 int ret;
70
71 if (dep->flags & DWC3_EP_TRANSFER_STARTED)
72 return 0;
73
74 dwc = dep->dwc;
75
76 memset(¶ms, 0, sizeof(params));
77 params.param0 = upper_32_bits(dwc->ep0_trb_addr);
78 params.param1 = lower_32_bits(dwc->ep0_trb_addr);
79
80 ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms);
81 if (ret < 0)
82 return ret;
83
84 dwc->ep0_next_event = DWC3_EP0_COMPLETE;
85
86 return 0;
87}
88
89static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
90 struct dwc3_request *req)
91{
92 struct dwc3 *dwc = dep->dwc;
93
94 req->request.actual = 0;
95 req->request.status = -EINPROGRESS;
96 req->epnum = dep->number;
97
98 list_add_tail(&req->list, &dep->pending_list);
99
100 /*
101 * Gadget driver might not be quick enough to queue a request
102 * before we get a Transfer Not Ready event on this endpoint.
103 *
104 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
105 * flag is set, it's telling us that as soon as Gadget queues the
106 * required request, we should kick the transfer here because the
107 * IRQ we were waiting for is long gone.
108 */
109 if (dep->flags & DWC3_EP_PENDING_REQUEST) {
110 unsigned int direction;
111
112 direction = !!(dep->flags & DWC3_EP0_DIR_IN);
113
114 if (dwc->ep0state != EP0_DATA_PHASE) {
115 dev_WARN(dwc->dev, "Unexpected pending request\n");
116 return 0;
117 }
118
119 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
120
121 dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
122 DWC3_EP0_DIR_IN);
123
124 return 0;
125 }
126
127 /*
128 * In case gadget driver asked us to delay the STATUS phase,
129 * handle it here.
130 */
131 if (dwc->delayed_status) {
132 unsigned int direction;
133
134 direction = !dwc->ep0_expect_in;
135 dwc->delayed_status = false;
136 usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
137
138 if (dwc->ep0state == EP0_STATUS_PHASE)
139 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
140
141 return 0;
142 }
143
144 /*
145 * Unfortunately we have uncovered a limitation wrt the Data Phase.
146 *
147 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
148 * come before issueing Start Transfer command, but if we do, we will
149 * miss situations where the host starts another SETUP phase instead of
150 * the DATA phase. Such cases happen at least on TD.7.6 of the Link
151 * Layer Compliance Suite.
152 *
153 * The problem surfaces due to the fact that in case of back-to-back
154 * SETUP packets there will be no XferNotReady(DATA) generated and we
155 * will be stuck waiting for XferNotReady(DATA) forever.
156 *
157 * By looking at tables 9-13 and 9-14 of the Databook, we can see that
158 * it tells us to start Data Phase right away. It also mentions that if
159 * we receive a SETUP phase instead of the DATA phase, core will issue
160 * XferComplete for the DATA phase, before actually initiating it in
161 * the wire, with the TRB's status set to "SETUP_PENDING". Such status
162 * can only be used to print some debugging logs, as the core expects
163 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
164 * just so it completes right away, without transferring anything and,
165 * only then, we can go back to the SETUP phase.
166 *
167 * Because of this scenario, SNPS decided to change the programming
168 * model of control transfers and support on-demand transfers only for
169 * the STATUS phase. To fix the issue we have now, we will always wait
170 * for gadget driver to queue the DATA phase's struct usb_request, then
171 * start it right away.
172 *
173 * If we're actually in a 2-stage transfer, we will wait for
174 * XferNotReady(STATUS).
175 */
176 if (dwc->three_stage_setup) {
177 unsigned int direction;
178
179 direction = dwc->ep0_expect_in;
180 dwc->ep0state = EP0_DATA_PHASE;
181
182 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
183
184 dep->flags &= ~DWC3_EP0_DIR_IN;
185 }
186
187 return 0;
188}
189
190int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
191 gfp_t gfp_flags)
192{
193 struct dwc3_request *req = to_dwc3_request(request);
194 struct dwc3_ep *dep = to_dwc3_ep(ep);
195 struct dwc3 *dwc = dep->dwc;
196
197 unsigned long flags;
198
199 int ret;
200
201 spin_lock_irqsave(&dwc->lock, flags);
202 if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
203 dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
204 dep->name);
205 ret = -ESHUTDOWN;
206 goto out;
207 }
208
209 /* we share one TRB for ep0/1 */
210 if (!list_empty(&dep->pending_list)) {
211 ret = -EBUSY;
212 goto out;
213 }
214
215 ret = __dwc3_gadget_ep0_queue(dep, req);
216
217out:
218 spin_unlock_irqrestore(&dwc->lock, flags);
219
220 return ret;
221}
222
223void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
224{
225 struct dwc3_ep *dep;
226
227 /* reinitialize physical ep1 */
228 dep = dwc->eps[1];
229 dep->flags = DWC3_EP_ENABLED;
230
231 /* stall is always issued on EP0 */
232 dep = dwc->eps[0];
233 __dwc3_gadget_ep_set_halt(dep, 1, false);
234 dep->flags = DWC3_EP_ENABLED;
235 dwc->delayed_status = false;
236
237 if (!list_empty(&dep->pending_list)) {
238 struct dwc3_request *req;
239
240 req = next_request(&dep->pending_list);
241 if (!dwc->connected)
242 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
243 else
244 dwc3_gadget_giveback(dep, req, -ECONNRESET);
245 }
246
247 dwc->eps[0]->trb_enqueue = 0;
248 dwc->eps[1]->trb_enqueue = 0;
249 dwc->ep0state = EP0_SETUP_PHASE;
250 dwc3_ep0_out_start(dwc);
251}
252
253int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
254{
255 struct dwc3_ep *dep = to_dwc3_ep(ep);
256 struct dwc3 *dwc = dep->dwc;
257
258 dwc3_ep0_stall_and_restart(dwc);
259
260 return 0;
261}
262
263int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
264{
265 struct dwc3_ep *dep = to_dwc3_ep(ep);
266 struct dwc3 *dwc = dep->dwc;
267 unsigned long flags;
268 int ret;
269
270 spin_lock_irqsave(&dwc->lock, flags);
271 ret = __dwc3_gadget_ep0_set_halt(ep, value);
272 spin_unlock_irqrestore(&dwc->lock, flags);
273
274 return ret;
275}
276
277void dwc3_ep0_out_start(struct dwc3 *dwc)
278{
279 struct dwc3_ep *dep;
280 int ret;
281 int i;
282
283 complete(&dwc->ep0_in_setup);
284
285 dep = dwc->eps[0];
286 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8,
287 DWC3_TRBCTL_CONTROL_SETUP, false);
288 ret = dwc3_ep0_start_trans(dep);
289 WARN_ON(ret < 0);
290 for (i = 2; i < DWC3_ENDPOINTS_NUM; i++) {
291 struct dwc3_ep *dwc3_ep;
292
293 dwc3_ep = dwc->eps[i];
294 if (!dwc3_ep)
295 continue;
296
297 if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP))
298 continue;
299
300 dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
301 if (dwc->connected)
302 dwc3_stop_active_transfer(dwc3_ep, true, true);
303 else
304 dwc3_remove_requests(dwc, dwc3_ep, -ESHUTDOWN);
305 }
306}
307
308static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
309{
310 struct dwc3_ep *dep;
311 u32 windex = le16_to_cpu(wIndex_le);
312 u32 epnum;
313
314 epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
315 if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
316 epnum |= 1;
317
318 dep = dwc->eps[epnum];
319 if (dep == NULL)
320 return NULL;
321
322 if (dep->flags & DWC3_EP_ENABLED)
323 return dep;
324
325 return NULL;
326}
327
328static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
329{
330}
331/*
332 * ch 9.4.5
333 */
334static int dwc3_ep0_handle_status(struct dwc3 *dwc,
335 struct usb_ctrlrequest *ctrl)
336{
337 struct dwc3_ep *dep;
338 u32 recip;
339 u32 value;
340 u32 reg;
341 u16 usb_status = 0;
342 __le16 *response_pkt;
343
344 /* We don't support PTM_STATUS */
345 value = le16_to_cpu(ctrl->wValue);
346 if (value != 0)
347 return -EINVAL;
348
349 recip = ctrl->bRequestType & USB_RECIP_MASK;
350 switch (recip) {
351 case USB_RECIP_DEVICE:
352 /*
353 * LTM will be set once we know how to set this in HW.
354 */
355 usb_status |= dwc->gadget->is_selfpowered;
356
357 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
358 (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
359 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
360 if (reg & DWC3_DCTL_INITU1ENA)
361 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
362 if (reg & DWC3_DCTL_INITU2ENA)
363 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
364 } else {
365 usb_status |= dwc->gadget->wakeup_armed <<
366 USB_DEVICE_REMOTE_WAKEUP;
367 }
368
369 break;
370
371 case USB_RECIP_INTERFACE:
372 /*
373 * Function Remote Wake Capable D0
374 * Function Remote Wakeup D1
375 */
376 return dwc3_ep0_delegate_req(dwc, ctrl);
377
378 case USB_RECIP_ENDPOINT:
379 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
380 if (!dep)
381 return -EINVAL;
382
383 if (dep->flags & DWC3_EP_STALL)
384 usb_status = 1 << USB_ENDPOINT_HALT;
385 break;
386 default:
387 return -EINVAL;
388 }
389
390 response_pkt = (__le16 *) dwc->setup_buf;
391 *response_pkt = cpu_to_le16(usb_status);
392
393 dep = dwc->eps[0];
394 dwc->ep0_usb_req.dep = dep;
395 dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
396 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
397 dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
398
399 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
400}
401
402static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,
403 int set)
404{
405 u32 reg;
406
407 if (state != USB_STATE_CONFIGURED)
408 return -EINVAL;
409 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
410 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
411 return -EINVAL;
412 if (set && dwc->dis_u1_entry_quirk)
413 return -EINVAL;
414
415 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
416 if (set)
417 reg |= DWC3_DCTL_INITU1ENA;
418 else
419 reg &= ~DWC3_DCTL_INITU1ENA;
420 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
421
422 return 0;
423}
424
425static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,
426 int set)
427{
428 u32 reg;
429
430
431 if (state != USB_STATE_CONFIGURED)
432 return -EINVAL;
433 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
434 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
435 return -EINVAL;
436 if (set && dwc->dis_u2_entry_quirk)
437 return -EINVAL;
438
439 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
440 if (set)
441 reg |= DWC3_DCTL_INITU2ENA;
442 else
443 reg &= ~DWC3_DCTL_INITU2ENA;
444 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
445
446 return 0;
447}
448
449static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state,
450 u32 wIndex, int set)
451{
452 if ((wIndex & 0xff) != 0)
453 return -EINVAL;
454 if (!set)
455 return -EINVAL;
456
457 switch (wIndex >> 8) {
458 case USB_TEST_J:
459 case USB_TEST_K:
460 case USB_TEST_SE0_NAK:
461 case USB_TEST_PACKET:
462 case USB_TEST_FORCE_ENABLE:
463 dwc->test_mode_nr = wIndex >> 8;
464 dwc->test_mode = true;
465 break;
466 default:
467 return -EINVAL;
468 }
469
470 return 0;
471}
472
473static int dwc3_ep0_handle_device(struct dwc3 *dwc,
474 struct usb_ctrlrequest *ctrl, int set)
475{
476 enum usb_device_state state;
477 u32 wValue;
478 u32 wIndex;
479 int ret = 0;
480
481 wValue = le16_to_cpu(ctrl->wValue);
482 wIndex = le16_to_cpu(ctrl->wIndex);
483 state = dwc->gadget->state;
484
485 switch (wValue) {
486 case USB_DEVICE_REMOTE_WAKEUP:
487 if (dwc->wakeup_configured)
488 dwc->gadget->wakeup_armed = set;
489 else
490 ret = -EINVAL;
491 break;
492 /*
493 * 9.4.1 says only for SS, in AddressState only for
494 * default control pipe
495 */
496 case USB_DEVICE_U1_ENABLE:
497 ret = dwc3_ep0_handle_u1(dwc, state, set);
498 break;
499 case USB_DEVICE_U2_ENABLE:
500 ret = dwc3_ep0_handle_u2(dwc, state, set);
501 break;
502 case USB_DEVICE_LTM_ENABLE:
503 ret = -EINVAL;
504 break;
505 case USB_DEVICE_TEST_MODE:
506 ret = dwc3_ep0_handle_test(dwc, state, wIndex, set);
507 break;
508 default:
509 ret = -EINVAL;
510 }
511
512 return ret;
513}
514
515static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
516 struct usb_ctrlrequest *ctrl, int set)
517{
518 u32 wValue;
519 int ret = 0;
520
521 wValue = le16_to_cpu(ctrl->wValue);
522
523 switch (wValue) {
524 case USB_INTRF_FUNC_SUSPEND:
525 ret = dwc3_ep0_delegate_req(dwc, ctrl);
526 break;
527 default:
528 ret = -EINVAL;
529 }
530
531 return ret;
532}
533
534static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
535 struct usb_ctrlrequest *ctrl, int set)
536{
537 struct dwc3_ep *dep;
538 u32 wValue;
539 int ret;
540
541 wValue = le16_to_cpu(ctrl->wValue);
542
543 switch (wValue) {
544 case USB_ENDPOINT_HALT:
545 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
546 if (!dep)
547 return -EINVAL;
548
549 if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
550 break;
551
552 ret = __dwc3_gadget_ep_set_halt(dep, set, true);
553 if (ret)
554 return -EINVAL;
555
556 /* ClearFeature(Halt) may need delayed status */
557 if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
558 return USB_GADGET_DELAYED_STATUS;
559
560 break;
561 default:
562 return -EINVAL;
563 }
564
565 return 0;
566}
567
568static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
569 struct usb_ctrlrequest *ctrl, int set)
570{
571 u32 recip;
572 int ret;
573
574 recip = ctrl->bRequestType & USB_RECIP_MASK;
575
576 switch (recip) {
577 case USB_RECIP_DEVICE:
578 ret = dwc3_ep0_handle_device(dwc, ctrl, set);
579 break;
580 case USB_RECIP_INTERFACE:
581 ret = dwc3_ep0_handle_intf(dwc, ctrl, set);
582 break;
583 case USB_RECIP_ENDPOINT:
584 ret = dwc3_ep0_handle_endpoint(dwc, ctrl, set);
585 break;
586 default:
587 ret = -EINVAL;
588 }
589
590 return ret;
591}
592
593static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
594{
595 enum usb_device_state state = dwc->gadget->state;
596 u32 addr;
597 u32 reg;
598
599 addr = le16_to_cpu(ctrl->wValue);
600 if (addr > 127) {
601 dev_err(dwc->dev, "invalid device address %d\n", addr);
602 return -EINVAL;
603 }
604
605 if (state == USB_STATE_CONFIGURED) {
606 dev_err(dwc->dev, "can't SetAddress() from Configured State\n");
607 return -EINVAL;
608 }
609
610 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
611 reg &= ~(DWC3_DCFG_DEVADDR_MASK);
612 reg |= DWC3_DCFG_DEVADDR(addr);
613 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
614
615 if (addr)
616 usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
617 else
618 usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
619
620 return 0;
621}
622
623static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
624{
625 int ret = -EINVAL;
626
627 if (dwc->async_callbacks) {
628 spin_unlock(&dwc->lock);
629 ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
630 spin_lock(&dwc->lock);
631 }
632 return ret;
633}
634
635static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
636{
637 enum usb_device_state state = dwc->gadget->state;
638 u32 cfg;
639 int ret;
640 u32 reg;
641
642 cfg = le16_to_cpu(ctrl->wValue);
643
644 switch (state) {
645 case USB_STATE_DEFAULT:
646 return -EINVAL;
647
648 case USB_STATE_ADDRESS:
649 dwc3_gadget_clear_tx_fifos(dwc);
650
651 ret = dwc3_ep0_delegate_req(dwc, ctrl);
652 /* if the cfg matches and the cfg is non zero */
653 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
654
655 /*
656 * only change state if set_config has already
657 * been processed. If gadget driver returns
658 * USB_GADGET_DELAYED_STATUS, we will wait
659 * to change the state on the next usb_ep_queue()
660 */
661 if (ret == 0)
662 usb_gadget_set_state(dwc->gadget,
663 USB_STATE_CONFIGURED);
664
665 /*
666 * Enable transition to U1/U2 state when
667 * nothing is pending from application.
668 */
669 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
670 if (!dwc->dis_u1_entry_quirk)
671 reg |= DWC3_DCTL_ACCEPTU1ENA;
672 if (!dwc->dis_u2_entry_quirk)
673 reg |= DWC3_DCTL_ACCEPTU2ENA;
674 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
675 }
676 break;
677
678 case USB_STATE_CONFIGURED:
679 ret = dwc3_ep0_delegate_req(dwc, ctrl);
680 if (!cfg && !ret)
681 usb_gadget_set_state(dwc->gadget,
682 USB_STATE_ADDRESS);
683 break;
684 default:
685 ret = -EINVAL;
686 }
687 return ret;
688}
689
690static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
691{
692 struct dwc3_ep *dep = to_dwc3_ep(ep);
693 struct dwc3 *dwc = dep->dwc;
694
695 u32 param = 0;
696 u32 reg;
697
698 struct timing {
699 u8 u1sel;
700 u8 u1pel;
701 __le16 u2sel;
702 __le16 u2pel;
703 } __packed timing;
704
705 int ret;
706
707 memcpy(&timing, req->buf, sizeof(timing));
708
709 dwc->u1sel = timing.u1sel;
710 dwc->u1pel = timing.u1pel;
711 dwc->u2sel = le16_to_cpu(timing.u2sel);
712 dwc->u2pel = le16_to_cpu(timing.u2pel);
713
714 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
715 if (reg & DWC3_DCTL_INITU2ENA)
716 param = dwc->u2pel;
717 if (reg & DWC3_DCTL_INITU1ENA)
718 param = dwc->u1pel;
719
720 /*
721 * According to Synopsys Databook, if parameter is
722 * greater than 125, a value of zero should be
723 * programmed in the register.
724 */
725 if (param > 125)
726 param = 0;
727
728 /* now that we have the time, issue DGCMD Set Sel */
729 ret = dwc3_send_gadget_generic_command(dwc,
730 DWC3_DGCMD_SET_PERIODIC_PAR, param);
731 WARN_ON(ret < 0);
732}
733
734static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
735{
736 struct dwc3_ep *dep;
737 enum usb_device_state state = dwc->gadget->state;
738 u16 wLength;
739
740 if (state == USB_STATE_DEFAULT)
741 return -EINVAL;
742
743 wLength = le16_to_cpu(ctrl->wLength);
744
745 if (wLength != 6) {
746 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
747 wLength);
748 return -EINVAL;
749 }
750
751 /*
752 * To handle Set SEL we need to receive 6 bytes from Host. So let's
753 * queue a usb_request for 6 bytes.
754 *
755 * Remember, though, this controller can't handle non-wMaxPacketSize
756 * aligned transfers on the OUT direction, so we queue a request for
757 * wMaxPacketSize instead.
758 */
759 dep = dwc->eps[0];
760 dwc->ep0_usb_req.dep = dep;
761 dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
762 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
763 dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
764
765 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
766}
767
768static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
769{
770 u16 wLength;
771 u16 wValue;
772 u16 wIndex;
773
774 wValue = le16_to_cpu(ctrl->wValue);
775 wLength = le16_to_cpu(ctrl->wLength);
776 wIndex = le16_to_cpu(ctrl->wIndex);
777
778 if (wIndex || wLength)
779 return -EINVAL;
780
781 dwc->gadget->isoch_delay = wValue;
782
783 return 0;
784}
785
786static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
787{
788 int ret;
789
790 switch (ctrl->bRequest) {
791 case USB_REQ_GET_STATUS:
792 ret = dwc3_ep0_handle_status(dwc, ctrl);
793 break;
794 case USB_REQ_CLEAR_FEATURE:
795 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
796 break;
797 case USB_REQ_SET_FEATURE:
798 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
799 break;
800 case USB_REQ_SET_ADDRESS:
801 ret = dwc3_ep0_set_address(dwc, ctrl);
802 break;
803 case USB_REQ_SET_CONFIGURATION:
804 ret = dwc3_ep0_set_config(dwc, ctrl);
805 break;
806 case USB_REQ_SET_SEL:
807 ret = dwc3_ep0_set_sel(dwc, ctrl);
808 break;
809 case USB_REQ_SET_ISOCH_DELAY:
810 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
811 break;
812 default:
813 ret = dwc3_ep0_delegate_req(dwc, ctrl);
814 break;
815 }
816
817 return ret;
818}
819
820static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
821 const struct dwc3_event_depevt *event)
822{
823 struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb;
824 int ret = -EINVAL;
825 u32 len;
826
827 if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected)
828 goto out;
829
830 trace_dwc3_ctrl_req(ctrl);
831
832 len = le16_to_cpu(ctrl->wLength);
833 if (!len) {
834 dwc->three_stage_setup = false;
835 dwc->ep0_expect_in = false;
836 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
837 } else {
838 dwc->three_stage_setup = true;
839 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
840 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
841 }
842
843 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
844 ret = dwc3_ep0_std_request(dwc, ctrl);
845 else
846 ret = dwc3_ep0_delegate_req(dwc, ctrl);
847
848 if (ret == USB_GADGET_DELAYED_STATUS)
849 dwc->delayed_status = true;
850
851out:
852 if (ret < 0)
853 dwc3_ep0_stall_and_restart(dwc);
854}
855
856static void dwc3_ep0_complete_data(struct dwc3 *dwc,
857 const struct dwc3_event_depevt *event)
858{
859 struct dwc3_request *r;
860 struct usb_request *ur;
861 struct dwc3_trb *trb;
862 struct dwc3_ep *ep0;
863 u32 transferred = 0;
864 u32 status;
865 u32 length;
866 u8 epnum;
867
868 epnum = event->endpoint_number;
869 ep0 = dwc->eps[0];
870
871 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
872 trb = dwc->ep0_trb;
873 trace_dwc3_complete_trb(ep0, trb);
874
875 r = next_request(&ep0->pending_list);
876 if (!r)
877 return;
878
879 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
880 if (status == DWC3_TRBSTS_SETUP_PENDING) {
881 dwc->setup_packet_pending = true;
882 if (r)
883 dwc3_gadget_giveback(ep0, r, -ECONNRESET);
884
885 return;
886 }
887
888 ur = &r->request;
889
890 length = trb->size & DWC3_TRB_SIZE_MASK;
891 transferred = ur->length - length;
892 ur->actual += transferred;
893
894 if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
895 ur->length && ur->zero) || dwc->ep0_bounced) {
896 trb++;
897 trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
898 trace_dwc3_complete_trb(ep0, trb);
899
900 if (r->direction)
901 dwc->eps[1]->trb_enqueue = 0;
902 else
903 dwc->eps[0]->trb_enqueue = 0;
904
905 dwc->ep0_bounced = false;
906 }
907
908 if ((epnum & 1) && ur->actual < ur->length)
909 dwc3_ep0_stall_and_restart(dwc);
910 else
911 dwc3_gadget_giveback(ep0, r, 0);
912}
913
914static void dwc3_ep0_complete_status(struct dwc3 *dwc,
915 const struct dwc3_event_depevt *event)
916{
917 struct dwc3_request *r;
918 struct dwc3_ep *dep;
919 struct dwc3_trb *trb;
920 u32 status;
921
922 dep = dwc->eps[0];
923 trb = dwc->ep0_trb;
924
925 trace_dwc3_complete_trb(dep, trb);
926
927 if (!list_empty(&dep->pending_list)) {
928 r = next_request(&dep->pending_list);
929
930 dwc3_gadget_giveback(dep, r, 0);
931 }
932
933 if (dwc->test_mode) {
934 int ret;
935
936 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
937 if (ret < 0) {
938 dev_err(dwc->dev, "invalid test #%d\n",
939 dwc->test_mode_nr);
940 dwc3_ep0_stall_and_restart(dwc);
941 return;
942 }
943 }
944
945 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
946 if (status == DWC3_TRBSTS_SETUP_PENDING)
947 dwc->setup_packet_pending = true;
948
949 dwc->ep0state = EP0_SETUP_PHASE;
950 dwc3_ep0_out_start(dwc);
951}
952
953static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
954 const struct dwc3_event_depevt *event)
955{
956 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
957
958 dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
959 dep->resource_index = 0;
960 dwc->setup_packet_pending = false;
961
962 switch (dwc->ep0state) {
963 case EP0_SETUP_PHASE:
964 dwc3_ep0_inspect_setup(dwc, event);
965 break;
966
967 case EP0_DATA_PHASE:
968 dwc3_ep0_complete_data(dwc, event);
969 break;
970
971 case EP0_STATUS_PHASE:
972 dwc3_ep0_complete_status(dwc, event);
973 break;
974 default:
975 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
976 }
977}
978
979static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
980 struct dwc3_ep *dep, struct dwc3_request *req)
981{
982 unsigned int trb_length = 0;
983 int ret;
984
985 req->direction = !!dep->number;
986
987 if (req->request.length == 0) {
988 if (!req->direction)
989 trb_length = dep->endpoint.maxpacket;
990
991 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length,
992 DWC3_TRBCTL_CONTROL_DATA, false);
993 ret = dwc3_ep0_start_trans(dep);
994 } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
995 && (dep->number == 0)) {
996 u32 maxpacket;
997 u32 rem;
998
999 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1000 &req->request, dep->number);
1001 if (ret)
1002 return;
1003
1004 maxpacket = dep->endpoint.maxpacket;
1005 rem = req->request.length % maxpacket;
1006 dwc->ep0_bounced = true;
1007
1008 /* prepare normal TRB */
1009 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1010 req->request.length,
1011 DWC3_TRBCTL_CONTROL_DATA,
1012 true);
1013
1014 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
1015
1016 /* Now prepare one extra TRB to align transfer size */
1017 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
1018 maxpacket - rem,
1019 DWC3_TRBCTL_CONTROL_DATA,
1020 false);
1021 ret = dwc3_ep0_start_trans(dep);
1022 } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
1023 req->request.length && req->request.zero) {
1024
1025 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1026 &req->request, dep->number);
1027 if (ret)
1028 return;
1029
1030 /* prepare normal TRB */
1031 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1032 req->request.length,
1033 DWC3_TRBCTL_CONTROL_DATA,
1034 true);
1035
1036 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
1037
1038 if (!req->direction)
1039 trb_length = dep->endpoint.maxpacket;
1040
1041 /* Now prepare one extra TRB to align transfer size */
1042 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
1043 trb_length, DWC3_TRBCTL_CONTROL_DATA,
1044 false);
1045 ret = dwc3_ep0_start_trans(dep);
1046 } else {
1047 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1048 &req->request, dep->number);
1049 if (ret)
1050 return;
1051
1052 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1053 req->request.length, DWC3_TRBCTL_CONTROL_DATA,
1054 false);
1055
1056 req->trb = &dwc->ep0_trb[dep->trb_enqueue];
1057
1058 ret = dwc3_ep0_start_trans(dep);
1059 }
1060
1061 WARN_ON(ret < 0);
1062}
1063
1064static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
1065{
1066 struct dwc3 *dwc = dep->dwc;
1067 u32 type;
1068
1069 type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
1070 : DWC3_TRBCTL_CONTROL_STATUS2;
1071
1072 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false);
1073 return dwc3_ep0_start_trans(dep);
1074}
1075
1076static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
1077{
1078 WARN_ON(dwc3_ep0_start_control_status(dep));
1079}
1080
1081static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
1082 const struct dwc3_event_depevt *event)
1083{
1084 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1085
1086 __dwc3_ep0_do_control_status(dwc, dep);
1087}
1088
1089void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
1090{
1091 unsigned int direction = !dwc->ep0_expect_in;
1092
1093 dwc->delayed_status = false;
1094 dwc->clear_stall_protocol = 0;
1095
1096 if (dwc->ep0state != EP0_STATUS_PHASE)
1097 return;
1098
1099 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
1100}
1101
1102void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
1103{
1104 struct dwc3_gadget_ep_cmd_params params;
1105 u32 cmd;
1106 int ret;
1107
1108 /*
1109 * For status/DATA OUT stage, TRB will be queued on ep0 out
1110 * endpoint for which resource index is zero. Hence allow
1111 * queuing ENDXFER command for ep0 out endpoint.
1112 */
1113 if (!dep->resource_index && dep->number)
1114 return;
1115
1116 cmd = DWC3_DEPCMD_ENDTRANSFER;
1117 cmd |= DWC3_DEPCMD_CMDIOC;
1118 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1119 memset(¶ms, 0, sizeof(params));
1120 ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
1121 WARN_ON_ONCE(ret);
1122 dep->resource_index = 0;
1123}
1124
1125static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
1126 const struct dwc3_event_depevt *event)
1127{
1128 switch (event->status) {
1129 case DEPEVT_STATUS_CONTROL_DATA:
1130 if (!dwc->softconnect || !dwc->connected)
1131 return;
1132 /*
1133 * We already have a DATA transfer in the controller's cache,
1134 * if we receive a XferNotReady(DATA) we will ignore it, unless
1135 * it's for the wrong direction.
1136 *
1137 * In that case, we must issue END_TRANSFER command to the Data
1138 * Phase we already have started and issue SetStall on the
1139 * control endpoint.
1140 */
1141 if (dwc->ep0_expect_in != event->endpoint_number) {
1142 struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in];
1143
1144 dev_err(dwc->dev, "unexpected direction for Data Phase\n");
1145 dwc3_ep0_end_control_data(dwc, dep);
1146 dwc3_ep0_stall_and_restart(dwc);
1147 return;
1148 }
1149
1150 break;
1151
1152 case DEPEVT_STATUS_CONTROL_STATUS:
1153 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
1154 return;
1155
1156 if (dwc->setup_packet_pending) {
1157 dwc3_ep0_stall_and_restart(dwc);
1158 return;
1159 }
1160
1161 dwc->ep0state = EP0_STATUS_PHASE;
1162
1163 if (dwc->delayed_status) {
1164 struct dwc3_ep *dep = dwc->eps[0];
1165
1166 WARN_ON_ONCE(event->endpoint_number != 1);
1167 /*
1168 * We should handle the delay STATUS phase here if the
1169 * request for handling delay STATUS has been queued
1170 * into the list.
1171 */
1172 if (!list_empty(&dep->pending_list)) {
1173 dwc->delayed_status = false;
1174 usb_gadget_set_state(dwc->gadget,
1175 USB_STATE_CONFIGURED);
1176 dwc3_ep0_do_control_status(dwc, event);
1177 }
1178
1179 return;
1180 }
1181
1182 dwc3_ep0_do_control_status(dwc, event);
1183 }
1184}
1185
1186void dwc3_ep0_interrupt(struct dwc3 *dwc,
1187 const struct dwc3_event_depevt *event)
1188{
1189 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1190 u8 cmd;
1191
1192 switch (event->endpoint_event) {
1193 case DWC3_DEPEVT_XFERCOMPLETE:
1194 dwc3_ep0_xfer_complete(dwc, event);
1195 break;
1196
1197 case DWC3_DEPEVT_XFERNOTREADY:
1198 dwc3_ep0_xfernotready(dwc, event);
1199 break;
1200
1201 case DWC3_DEPEVT_XFERINPROGRESS:
1202 case DWC3_DEPEVT_RXTXFIFOEVT:
1203 case DWC3_DEPEVT_STREAMEVT:
1204 break;
1205 case DWC3_DEPEVT_EPCMDCMPLT:
1206 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
1207
1208 if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
1209 dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
1210 dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
1211 }
1212 break;
1213 default:
1214 dev_err(dwc->dev, "unknown endpoint event %d\n", event->endpoint_event);
1215 break;
1216 }
1217}
1/**
2 * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
3 *
4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
5 *
6 * Authors: Felipe Balbi <balbi@ti.com>,
7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
8 *
9 * This program is free software: you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 of
11 * the License as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19#include <linux/kernel.h>
20#include <linux/slab.h>
21#include <linux/spinlock.h>
22#include <linux/platform_device.h>
23#include <linux/pm_runtime.h>
24#include <linux/interrupt.h>
25#include <linux/io.h>
26#include <linux/list.h>
27#include <linux/dma-mapping.h>
28
29#include <linux/usb/ch9.h>
30#include <linux/usb/gadget.h>
31#include <linux/usb/composite.h>
32
33#include "core.h"
34#include "debug.h"
35#include "gadget.h"
36#include "io.h"
37
38static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
39static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
40 struct dwc3_ep *dep, struct dwc3_request *req);
41
42static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
43{
44 switch (state) {
45 case EP0_UNCONNECTED:
46 return "Unconnected";
47 case EP0_SETUP_PHASE:
48 return "Setup Phase";
49 case EP0_DATA_PHASE:
50 return "Data Phase";
51 case EP0_STATUS_PHASE:
52 return "Status Phase";
53 default:
54 return "UNKNOWN";
55 }
56}
57
58static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
59 u32 len, u32 type, bool chain)
60{
61 struct dwc3_gadget_ep_cmd_params params;
62 struct dwc3_trb *trb;
63 struct dwc3_ep *dep;
64
65 int ret;
66
67 dep = dwc->eps[epnum];
68 if (dep->flags & DWC3_EP_BUSY) {
69 dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
70 return 0;
71 }
72
73 trb = &dwc->ep0_trb[dep->free_slot];
74
75 if (chain)
76 dep->free_slot++;
77
78 trb->bpl = lower_32_bits(buf_dma);
79 trb->bph = upper_32_bits(buf_dma);
80 trb->size = len;
81 trb->ctrl = type;
82
83 trb->ctrl |= (DWC3_TRB_CTRL_HWO
84 | DWC3_TRB_CTRL_ISP_IMI);
85
86 if (chain)
87 trb->ctrl |= DWC3_TRB_CTRL_CHN;
88 else
89 trb->ctrl |= (DWC3_TRB_CTRL_IOC
90 | DWC3_TRB_CTRL_LST);
91
92 if (chain)
93 return 0;
94
95 memset(¶ms, 0, sizeof(params));
96 params.param0 = upper_32_bits(dwc->ep0_trb_addr);
97 params.param1 = lower_32_bits(dwc->ep0_trb_addr);
98
99 trace_dwc3_prepare_trb(dep, trb);
100
101 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
102 DWC3_DEPCMD_STARTTRANSFER, ¶ms);
103 if (ret < 0) {
104 dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
105 dep->name);
106 return ret;
107 }
108
109 dep->flags |= DWC3_EP_BUSY;
110 dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
111 dep->number);
112
113 dwc->ep0_next_event = DWC3_EP0_COMPLETE;
114
115 return 0;
116}
117
118static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
119 struct dwc3_request *req)
120{
121 struct dwc3 *dwc = dep->dwc;
122
123 req->request.actual = 0;
124 req->request.status = -EINPROGRESS;
125 req->epnum = dep->number;
126
127 list_add_tail(&req->list, &dep->request_list);
128
129 /*
130 * Gadget driver might not be quick enough to queue a request
131 * before we get a Transfer Not Ready event on this endpoint.
132 *
133 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
134 * flag is set, it's telling us that as soon as Gadget queues the
135 * required request, we should kick the transfer here because the
136 * IRQ we were waiting for is long gone.
137 */
138 if (dep->flags & DWC3_EP_PENDING_REQUEST) {
139 unsigned direction;
140
141 direction = !!(dep->flags & DWC3_EP0_DIR_IN);
142
143 if (dwc->ep0state != EP0_DATA_PHASE) {
144 dev_WARN(dwc->dev, "Unexpected pending request\n");
145 return 0;
146 }
147
148 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
149
150 dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
151 DWC3_EP0_DIR_IN);
152
153 return 0;
154 }
155
156 /*
157 * In case gadget driver asked us to delay the STATUS phase,
158 * handle it here.
159 */
160 if (dwc->delayed_status) {
161 unsigned direction;
162
163 direction = !dwc->ep0_expect_in;
164 dwc->delayed_status = false;
165 usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
166
167 if (dwc->ep0state == EP0_STATUS_PHASE)
168 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
169 else
170 dwc3_trace(trace_dwc3_ep0,
171 "too early for delayed status");
172
173 return 0;
174 }
175
176 /*
177 * Unfortunately we have uncovered a limitation wrt the Data Phase.
178 *
179 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
180 * come before issueing Start Transfer command, but if we do, we will
181 * miss situations where the host starts another SETUP phase instead of
182 * the DATA phase. Such cases happen at least on TD.7.6 of the Link
183 * Layer Compliance Suite.
184 *
185 * The problem surfaces due to the fact that in case of back-to-back
186 * SETUP packets there will be no XferNotReady(DATA) generated and we
187 * will be stuck waiting for XferNotReady(DATA) forever.
188 *
189 * By looking at tables 9-13 and 9-14 of the Databook, we can see that
190 * it tells us to start Data Phase right away. It also mentions that if
191 * we receive a SETUP phase instead of the DATA phase, core will issue
192 * XferComplete for the DATA phase, before actually initiating it in
193 * the wire, with the TRB's status set to "SETUP_PENDING". Such status
194 * can only be used to print some debugging logs, as the core expects
195 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
196 * just so it completes right away, without transferring anything and,
197 * only then, we can go back to the SETUP phase.
198 *
199 * Because of this scenario, SNPS decided to change the programming
200 * model of control transfers and support on-demand transfers only for
201 * the STATUS phase. To fix the issue we have now, we will always wait
202 * for gadget driver to queue the DATA phase's struct usb_request, then
203 * start it right away.
204 *
205 * If we're actually in a 2-stage transfer, we will wait for
206 * XferNotReady(STATUS).
207 */
208 if (dwc->three_stage_setup) {
209 unsigned direction;
210
211 direction = dwc->ep0_expect_in;
212 dwc->ep0state = EP0_DATA_PHASE;
213
214 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
215
216 dep->flags &= ~DWC3_EP0_DIR_IN;
217 }
218
219 return 0;
220}
221
222int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
223 gfp_t gfp_flags)
224{
225 struct dwc3_request *req = to_dwc3_request(request);
226 struct dwc3_ep *dep = to_dwc3_ep(ep);
227 struct dwc3 *dwc = dep->dwc;
228
229 unsigned long flags;
230
231 int ret;
232
233 spin_lock_irqsave(&dwc->lock, flags);
234 if (!dep->endpoint.desc) {
235 dwc3_trace(trace_dwc3_ep0,
236 "trying to queue request %p to disabled %s",
237 request, dep->name);
238 ret = -ESHUTDOWN;
239 goto out;
240 }
241
242 /* we share one TRB for ep0/1 */
243 if (!list_empty(&dep->request_list)) {
244 ret = -EBUSY;
245 goto out;
246 }
247
248 dwc3_trace(trace_dwc3_ep0,
249 "queueing request %p to %s length %d state '%s'",
250 request, dep->name, request->length,
251 dwc3_ep0_state_string(dwc->ep0state));
252
253 ret = __dwc3_gadget_ep0_queue(dep, req);
254
255out:
256 spin_unlock_irqrestore(&dwc->lock, flags);
257
258 return ret;
259}
260
261static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
262{
263 struct dwc3_ep *dep;
264
265 /* reinitialize physical ep1 */
266 dep = dwc->eps[1];
267 dep->flags = DWC3_EP_ENABLED;
268
269 /* stall is always issued on EP0 */
270 dep = dwc->eps[0];
271 __dwc3_gadget_ep_set_halt(dep, 1, false);
272 dep->flags = DWC3_EP_ENABLED;
273 dwc->delayed_status = false;
274
275 if (!list_empty(&dep->request_list)) {
276 struct dwc3_request *req;
277
278 req = next_request(&dep->request_list);
279 dwc3_gadget_giveback(dep, req, -ECONNRESET);
280 }
281
282 dwc->ep0state = EP0_SETUP_PHASE;
283 dwc3_ep0_out_start(dwc);
284}
285
286int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
287{
288 struct dwc3_ep *dep = to_dwc3_ep(ep);
289 struct dwc3 *dwc = dep->dwc;
290
291 dwc3_ep0_stall_and_restart(dwc);
292
293 return 0;
294}
295
296int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
297{
298 struct dwc3_ep *dep = to_dwc3_ep(ep);
299 struct dwc3 *dwc = dep->dwc;
300 unsigned long flags;
301 int ret;
302
303 spin_lock_irqsave(&dwc->lock, flags);
304 ret = __dwc3_gadget_ep0_set_halt(ep, value);
305 spin_unlock_irqrestore(&dwc->lock, flags);
306
307 return ret;
308}
309
310void dwc3_ep0_out_start(struct dwc3 *dwc)
311{
312 int ret;
313
314 ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
315 DWC3_TRBCTL_CONTROL_SETUP, false);
316 WARN_ON(ret < 0);
317}
318
319static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
320{
321 struct dwc3_ep *dep;
322 u32 windex = le16_to_cpu(wIndex_le);
323 u32 epnum;
324
325 epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
326 if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
327 epnum |= 1;
328
329 dep = dwc->eps[epnum];
330 if (dep->flags & DWC3_EP_ENABLED)
331 return dep;
332
333 return NULL;
334}
335
336static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
337{
338}
339/*
340 * ch 9.4.5
341 */
342static int dwc3_ep0_handle_status(struct dwc3 *dwc,
343 struct usb_ctrlrequest *ctrl)
344{
345 struct dwc3_ep *dep;
346 u32 recip;
347 u32 reg;
348 u16 usb_status = 0;
349 __le16 *response_pkt;
350
351 recip = ctrl->bRequestType & USB_RECIP_MASK;
352 switch (recip) {
353 case USB_RECIP_DEVICE:
354 /*
355 * LTM will be set once we know how to set this in HW.
356 */
357 usb_status |= dwc->gadget.is_selfpowered;
358
359 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
360 (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
361 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
362 if (reg & DWC3_DCTL_INITU1ENA)
363 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
364 if (reg & DWC3_DCTL_INITU2ENA)
365 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
366 }
367
368 break;
369
370 case USB_RECIP_INTERFACE:
371 /*
372 * Function Remote Wake Capable D0
373 * Function Remote Wakeup D1
374 */
375 break;
376
377 case USB_RECIP_ENDPOINT:
378 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
379 if (!dep)
380 return -EINVAL;
381
382 if (dep->flags & DWC3_EP_STALL)
383 usb_status = 1 << USB_ENDPOINT_HALT;
384 break;
385 default:
386 return -EINVAL;
387 }
388
389 response_pkt = (__le16 *) dwc->setup_buf;
390 *response_pkt = cpu_to_le16(usb_status);
391
392 dep = dwc->eps[0];
393 dwc->ep0_usb_req.dep = dep;
394 dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
395 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
396 dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
397
398 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
399}
400
401static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
402 struct usb_ctrlrequest *ctrl, int set)
403{
404 struct dwc3_ep *dep;
405 u32 recip;
406 u32 wValue;
407 u32 wIndex;
408 u32 reg;
409 int ret;
410 enum usb_device_state state;
411
412 wValue = le16_to_cpu(ctrl->wValue);
413 wIndex = le16_to_cpu(ctrl->wIndex);
414 recip = ctrl->bRequestType & USB_RECIP_MASK;
415 state = dwc->gadget.state;
416
417 switch (recip) {
418 case USB_RECIP_DEVICE:
419
420 switch (wValue) {
421 case USB_DEVICE_REMOTE_WAKEUP:
422 break;
423 /*
424 * 9.4.1 says only only for SS, in AddressState only for
425 * default control pipe
426 */
427 case USB_DEVICE_U1_ENABLE:
428 if (state != USB_STATE_CONFIGURED)
429 return -EINVAL;
430 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
431 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
432 return -EINVAL;
433
434 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
435 if (set)
436 reg |= DWC3_DCTL_INITU1ENA;
437 else
438 reg &= ~DWC3_DCTL_INITU1ENA;
439 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
440 break;
441
442 case USB_DEVICE_U2_ENABLE:
443 if (state != USB_STATE_CONFIGURED)
444 return -EINVAL;
445 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
446 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
447 return -EINVAL;
448
449 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
450 if (set)
451 reg |= DWC3_DCTL_INITU2ENA;
452 else
453 reg &= ~DWC3_DCTL_INITU2ENA;
454 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
455 break;
456
457 case USB_DEVICE_LTM_ENABLE:
458 return -EINVAL;
459
460 case USB_DEVICE_TEST_MODE:
461 if ((wIndex & 0xff) != 0)
462 return -EINVAL;
463 if (!set)
464 return -EINVAL;
465
466 dwc->test_mode_nr = wIndex >> 8;
467 dwc->test_mode = true;
468 break;
469 default:
470 return -EINVAL;
471 }
472 break;
473
474 case USB_RECIP_INTERFACE:
475 switch (wValue) {
476 case USB_INTRF_FUNC_SUSPEND:
477 if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
478 /* XXX enable Low power suspend */
479 ;
480 if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
481 /* XXX enable remote wakeup */
482 ;
483 break;
484 default:
485 return -EINVAL;
486 }
487 break;
488
489 case USB_RECIP_ENDPOINT:
490 switch (wValue) {
491 case USB_ENDPOINT_HALT:
492 dep = dwc3_wIndex_to_dep(dwc, wIndex);
493 if (!dep)
494 return -EINVAL;
495 if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
496 break;
497 ret = __dwc3_gadget_ep_set_halt(dep, set, true);
498 if (ret)
499 return -EINVAL;
500 break;
501 default:
502 return -EINVAL;
503 }
504 break;
505
506 default:
507 return -EINVAL;
508 }
509
510 return 0;
511}
512
513static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
514{
515 enum usb_device_state state = dwc->gadget.state;
516 u32 addr;
517 u32 reg;
518
519 addr = le16_to_cpu(ctrl->wValue);
520 if (addr > 127) {
521 dwc3_trace(trace_dwc3_ep0, "invalid device address %d", addr);
522 return -EINVAL;
523 }
524
525 if (state == USB_STATE_CONFIGURED) {
526 dwc3_trace(trace_dwc3_ep0,
527 "trying to set address when configured");
528 return -EINVAL;
529 }
530
531 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
532 reg &= ~(DWC3_DCFG_DEVADDR_MASK);
533 reg |= DWC3_DCFG_DEVADDR(addr);
534 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
535
536 if (addr)
537 usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
538 else
539 usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
540
541 return 0;
542}
543
544static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
545{
546 int ret;
547
548 spin_unlock(&dwc->lock);
549 ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
550 spin_lock(&dwc->lock);
551 return ret;
552}
553
554static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
555{
556 enum usb_device_state state = dwc->gadget.state;
557 u32 cfg;
558 int ret;
559 u32 reg;
560
561 cfg = le16_to_cpu(ctrl->wValue);
562
563 switch (state) {
564 case USB_STATE_DEFAULT:
565 return -EINVAL;
566
567 case USB_STATE_ADDRESS:
568 ret = dwc3_ep0_delegate_req(dwc, ctrl);
569 /* if the cfg matches and the cfg is non zero */
570 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
571
572 /*
573 * only change state if set_config has already
574 * been processed. If gadget driver returns
575 * USB_GADGET_DELAYED_STATUS, we will wait
576 * to change the state on the next usb_ep_queue()
577 */
578 if (ret == 0)
579 usb_gadget_set_state(&dwc->gadget,
580 USB_STATE_CONFIGURED);
581
582 /*
583 * Enable transition to U1/U2 state when
584 * nothing is pending from application.
585 */
586 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
587 reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
588 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
589
590 dwc->resize_fifos = true;
591 dwc3_trace(trace_dwc3_ep0, "resize FIFOs flag SET");
592 }
593 break;
594
595 case USB_STATE_CONFIGURED:
596 ret = dwc3_ep0_delegate_req(dwc, ctrl);
597 if (!cfg && !ret)
598 usb_gadget_set_state(&dwc->gadget,
599 USB_STATE_ADDRESS);
600 break;
601 default:
602 ret = -EINVAL;
603 }
604 return ret;
605}
606
607static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
608{
609 struct dwc3_ep *dep = to_dwc3_ep(ep);
610 struct dwc3 *dwc = dep->dwc;
611
612 u32 param = 0;
613 u32 reg;
614
615 struct timing {
616 u8 u1sel;
617 u8 u1pel;
618 u16 u2sel;
619 u16 u2pel;
620 } __packed timing;
621
622 int ret;
623
624 memcpy(&timing, req->buf, sizeof(timing));
625
626 dwc->u1sel = timing.u1sel;
627 dwc->u1pel = timing.u1pel;
628 dwc->u2sel = le16_to_cpu(timing.u2sel);
629 dwc->u2pel = le16_to_cpu(timing.u2pel);
630
631 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
632 if (reg & DWC3_DCTL_INITU2ENA)
633 param = dwc->u2pel;
634 if (reg & DWC3_DCTL_INITU1ENA)
635 param = dwc->u1pel;
636
637 /*
638 * According to Synopsys Databook, if parameter is
639 * greater than 125, a value of zero should be
640 * programmed in the register.
641 */
642 if (param > 125)
643 param = 0;
644
645 /* now that we have the time, issue DGCMD Set Sel */
646 ret = dwc3_send_gadget_generic_command(dwc,
647 DWC3_DGCMD_SET_PERIODIC_PAR, param);
648 WARN_ON(ret < 0);
649}
650
651static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
652{
653 struct dwc3_ep *dep;
654 enum usb_device_state state = dwc->gadget.state;
655 u16 wLength;
656 u16 wValue;
657
658 if (state == USB_STATE_DEFAULT)
659 return -EINVAL;
660
661 wValue = le16_to_cpu(ctrl->wValue);
662 wLength = le16_to_cpu(ctrl->wLength);
663
664 if (wLength != 6) {
665 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
666 wLength);
667 return -EINVAL;
668 }
669
670 /*
671 * To handle Set SEL we need to receive 6 bytes from Host. So let's
672 * queue a usb_request for 6 bytes.
673 *
674 * Remember, though, this controller can't handle non-wMaxPacketSize
675 * aligned transfers on the OUT direction, so we queue a request for
676 * wMaxPacketSize instead.
677 */
678 dep = dwc->eps[0];
679 dwc->ep0_usb_req.dep = dep;
680 dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
681 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
682 dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
683
684 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
685}
686
687static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
688{
689 u16 wLength;
690 u16 wValue;
691 u16 wIndex;
692
693 wValue = le16_to_cpu(ctrl->wValue);
694 wLength = le16_to_cpu(ctrl->wLength);
695 wIndex = le16_to_cpu(ctrl->wIndex);
696
697 if (wIndex || wLength)
698 return -EINVAL;
699
700 /*
701 * REVISIT It's unclear from Databook what to do with this
702 * value. For now, just cache it.
703 */
704 dwc->isoch_delay = wValue;
705
706 return 0;
707}
708
709static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
710{
711 int ret;
712
713 switch (ctrl->bRequest) {
714 case USB_REQ_GET_STATUS:
715 dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS");
716 ret = dwc3_ep0_handle_status(dwc, ctrl);
717 break;
718 case USB_REQ_CLEAR_FEATURE:
719 dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE");
720 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
721 break;
722 case USB_REQ_SET_FEATURE:
723 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE");
724 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
725 break;
726 case USB_REQ_SET_ADDRESS:
727 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS");
728 ret = dwc3_ep0_set_address(dwc, ctrl);
729 break;
730 case USB_REQ_SET_CONFIGURATION:
731 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION");
732 ret = dwc3_ep0_set_config(dwc, ctrl);
733 break;
734 case USB_REQ_SET_SEL:
735 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL");
736 ret = dwc3_ep0_set_sel(dwc, ctrl);
737 break;
738 case USB_REQ_SET_ISOCH_DELAY:
739 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
740 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
741 break;
742 default:
743 dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
744 ret = dwc3_ep0_delegate_req(dwc, ctrl);
745 break;
746 }
747
748 return ret;
749}
750
751static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
752 const struct dwc3_event_depevt *event)
753{
754 struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
755 int ret = -EINVAL;
756 u32 len;
757
758 if (!dwc->gadget_driver)
759 goto out;
760
761 trace_dwc3_ctrl_req(ctrl);
762
763 len = le16_to_cpu(ctrl->wLength);
764 if (!len) {
765 dwc->three_stage_setup = false;
766 dwc->ep0_expect_in = false;
767 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
768 } else {
769 dwc->three_stage_setup = true;
770 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
771 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
772 }
773
774 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
775 ret = dwc3_ep0_std_request(dwc, ctrl);
776 else
777 ret = dwc3_ep0_delegate_req(dwc, ctrl);
778
779 if (ret == USB_GADGET_DELAYED_STATUS)
780 dwc->delayed_status = true;
781
782out:
783 if (ret < 0)
784 dwc3_ep0_stall_and_restart(dwc);
785}
786
787static void dwc3_ep0_complete_data(struct dwc3 *dwc,
788 const struct dwc3_event_depevt *event)
789{
790 struct dwc3_request *r = NULL;
791 struct usb_request *ur;
792 struct dwc3_trb *trb;
793 struct dwc3_ep *ep0;
794 unsigned transfer_size = 0;
795 unsigned maxp;
796 unsigned remaining_ur_length;
797 void *buf;
798 u32 transferred = 0;
799 u32 status;
800 u32 length;
801 u8 epnum;
802
803 epnum = event->endpoint_number;
804 ep0 = dwc->eps[0];
805
806 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
807
808 trb = dwc->ep0_trb;
809
810 trace_dwc3_complete_trb(ep0, trb);
811
812 r = next_request(&ep0->request_list);
813 if (!r)
814 return;
815
816 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
817 if (status == DWC3_TRBSTS_SETUP_PENDING) {
818 dwc->setup_packet_pending = true;
819
820 dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
821
822 if (r)
823 dwc3_gadget_giveback(ep0, r, -ECONNRESET);
824
825 return;
826 }
827
828 ur = &r->request;
829 buf = ur->buf;
830 remaining_ur_length = ur->length;
831
832 length = trb->size & DWC3_TRB_SIZE_MASK;
833
834 maxp = ep0->endpoint.maxpacket;
835
836 if (dwc->ep0_bounced) {
837 /*
838 * Handle the first TRB before handling the bounce buffer if
839 * the request length is greater than the bounce buffer size
840 */
841 if (ur->length > DWC3_EP0_BOUNCE_SIZE) {
842 transfer_size = ALIGN(ur->length - maxp, maxp);
843 transferred = transfer_size - length;
844 buf = (u8 *)buf + transferred;
845 ur->actual += transferred;
846 remaining_ur_length -= transferred;
847
848 trb++;
849 length = trb->size & DWC3_TRB_SIZE_MASK;
850
851 ep0->free_slot = 0;
852 }
853
854 transfer_size = roundup((ur->length - transfer_size),
855 maxp);
856
857 transferred = min_t(u32, remaining_ur_length,
858 transfer_size - length);
859 memcpy(buf, dwc->ep0_bounce, transferred);
860 } else {
861 transferred = ur->length - length;
862 }
863
864 ur->actual += transferred;
865
866 if ((epnum & 1) && ur->actual < ur->length) {
867 /* for some reason we did not get everything out */
868
869 dwc3_ep0_stall_and_restart(dwc);
870 } else {
871 dwc3_gadget_giveback(ep0, r, 0);
872
873 if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
874 ur->length && ur->zero) {
875 int ret;
876
877 dwc->ep0_next_event = DWC3_EP0_COMPLETE;
878
879 ret = dwc3_ep0_start_trans(dwc, epnum,
880 dwc->ctrl_req_addr, 0,
881 DWC3_TRBCTL_CONTROL_DATA, false);
882 WARN_ON(ret < 0);
883 }
884 }
885}
886
887static void dwc3_ep0_complete_status(struct dwc3 *dwc,
888 const struct dwc3_event_depevt *event)
889{
890 struct dwc3_request *r;
891 struct dwc3_ep *dep;
892 struct dwc3_trb *trb;
893 u32 status;
894
895 dep = dwc->eps[0];
896 trb = dwc->ep0_trb;
897
898 trace_dwc3_complete_trb(dep, trb);
899
900 if (!list_empty(&dep->request_list)) {
901 r = next_request(&dep->request_list);
902
903 dwc3_gadget_giveback(dep, r, 0);
904 }
905
906 if (dwc->test_mode) {
907 int ret;
908
909 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
910 if (ret < 0) {
911 dwc3_trace(trace_dwc3_ep0, "Invalid Test #%d",
912 dwc->test_mode_nr);
913 dwc3_ep0_stall_and_restart(dwc);
914 return;
915 }
916 }
917
918 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
919 if (status == DWC3_TRBSTS_SETUP_PENDING) {
920 dwc->setup_packet_pending = true;
921 dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
922 }
923
924 dwc->ep0state = EP0_SETUP_PHASE;
925 dwc3_ep0_out_start(dwc);
926}
927
928static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
929 const struct dwc3_event_depevt *event)
930{
931 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
932
933 dep->flags &= ~DWC3_EP_BUSY;
934 dep->resource_index = 0;
935 dwc->setup_packet_pending = false;
936
937 switch (dwc->ep0state) {
938 case EP0_SETUP_PHASE:
939 dwc3_trace(trace_dwc3_ep0, "Setup Phase");
940 dwc3_ep0_inspect_setup(dwc, event);
941 break;
942
943 case EP0_DATA_PHASE:
944 dwc3_trace(trace_dwc3_ep0, "Data Phase");
945 dwc3_ep0_complete_data(dwc, event);
946 break;
947
948 case EP0_STATUS_PHASE:
949 dwc3_trace(trace_dwc3_ep0, "Status Phase");
950 dwc3_ep0_complete_status(dwc, event);
951 break;
952 default:
953 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
954 }
955}
956
957static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
958 struct dwc3_ep *dep, struct dwc3_request *req)
959{
960 int ret;
961
962 req->direction = !!dep->number;
963
964 if (req->request.length == 0) {
965 ret = dwc3_ep0_start_trans(dwc, dep->number,
966 dwc->ctrl_req_addr, 0,
967 DWC3_TRBCTL_CONTROL_DATA, false);
968 } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
969 && (dep->number == 0)) {
970 u32 transfer_size = 0;
971 u32 maxpacket;
972
973 ret = usb_gadget_map_request(&dwc->gadget, &req->request,
974 dep->number);
975 if (ret) {
976 dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
977 return;
978 }
979
980 maxpacket = dep->endpoint.maxpacket;
981
982 if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
983 transfer_size = ALIGN(req->request.length - maxpacket,
984 maxpacket);
985 ret = dwc3_ep0_start_trans(dwc, dep->number,
986 req->request.dma,
987 transfer_size,
988 DWC3_TRBCTL_CONTROL_DATA,
989 true);
990 }
991
992 transfer_size = roundup((req->request.length - transfer_size),
993 maxpacket);
994
995 dwc->ep0_bounced = true;
996
997 ret = dwc3_ep0_start_trans(dwc, dep->number,
998 dwc->ep0_bounce_addr, transfer_size,
999 DWC3_TRBCTL_CONTROL_DATA, false);
1000 } else {
1001 ret = usb_gadget_map_request(&dwc->gadget, &req->request,
1002 dep->number);
1003 if (ret) {
1004 dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
1005 return;
1006 }
1007
1008 ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
1009 req->request.length, DWC3_TRBCTL_CONTROL_DATA,
1010 false);
1011 }
1012
1013 WARN_ON(ret < 0);
1014}
1015
1016static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
1017{
1018 struct dwc3 *dwc = dep->dwc;
1019 u32 type;
1020
1021 type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
1022 : DWC3_TRBCTL_CONTROL_STATUS2;
1023
1024 return dwc3_ep0_start_trans(dwc, dep->number,
1025 dwc->ctrl_req_addr, 0, type, false);
1026}
1027
1028static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
1029{
1030 if (dwc->resize_fifos) {
1031 dwc3_trace(trace_dwc3_ep0, "Resizing FIFOs");
1032 dwc3_gadget_resize_tx_fifos(dwc);
1033 dwc->resize_fifos = 0;
1034 }
1035
1036 WARN_ON(dwc3_ep0_start_control_status(dep));
1037}
1038
1039static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
1040 const struct dwc3_event_depevt *event)
1041{
1042 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1043
1044 __dwc3_ep0_do_control_status(dwc, dep);
1045}
1046
1047static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
1048{
1049 struct dwc3_gadget_ep_cmd_params params;
1050 u32 cmd;
1051 int ret;
1052
1053 if (!dep->resource_index)
1054 return;
1055
1056 cmd = DWC3_DEPCMD_ENDTRANSFER;
1057 cmd |= DWC3_DEPCMD_CMDIOC;
1058 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1059 memset(¶ms, 0, sizeof(params));
1060 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
1061 WARN_ON_ONCE(ret);
1062 dep->resource_index = 0;
1063}
1064
1065static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
1066 const struct dwc3_event_depevt *event)
1067{
1068 switch (event->status) {
1069 case DEPEVT_STATUS_CONTROL_DATA:
1070 dwc3_trace(trace_dwc3_ep0, "Control Data");
1071
1072 /*
1073 * We already have a DATA transfer in the controller's cache,
1074 * if we receive a XferNotReady(DATA) we will ignore it, unless
1075 * it's for the wrong direction.
1076 *
1077 * In that case, we must issue END_TRANSFER command to the Data
1078 * Phase we already have started and issue SetStall on the
1079 * control endpoint.
1080 */
1081 if (dwc->ep0_expect_in != event->endpoint_number) {
1082 struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in];
1083
1084 dwc3_trace(trace_dwc3_ep0,
1085 "Wrong direction for Data phase");
1086 dwc3_ep0_end_control_data(dwc, dep);
1087 dwc3_ep0_stall_and_restart(dwc);
1088 return;
1089 }
1090
1091 break;
1092
1093 case DEPEVT_STATUS_CONTROL_STATUS:
1094 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
1095 return;
1096
1097 dwc3_trace(trace_dwc3_ep0, "Control Status");
1098
1099 dwc->ep0state = EP0_STATUS_PHASE;
1100
1101 if (dwc->delayed_status) {
1102 WARN_ON_ONCE(event->endpoint_number != 1);
1103 dwc3_trace(trace_dwc3_ep0, "Delayed Status");
1104 return;
1105 }
1106
1107 dwc3_ep0_do_control_status(dwc, event);
1108 }
1109}
1110
1111void dwc3_ep0_interrupt(struct dwc3 *dwc,
1112 const struct dwc3_event_depevt *event)
1113{
1114 u8 epnum = event->endpoint_number;
1115
1116 dwc3_trace(trace_dwc3_ep0, "%s while ep%d%s in state '%s'",
1117 dwc3_ep_event_string(event->endpoint_event),
1118 epnum >> 1, (epnum & 1) ? "in" : "out",
1119 dwc3_ep0_state_string(dwc->ep0state));
1120
1121 switch (event->endpoint_event) {
1122 case DWC3_DEPEVT_XFERCOMPLETE:
1123 dwc3_ep0_xfer_complete(dwc, event);
1124 break;
1125
1126 case DWC3_DEPEVT_XFERNOTREADY:
1127 dwc3_ep0_xfernotready(dwc, event);
1128 break;
1129
1130 case DWC3_DEPEVT_XFERINPROGRESS:
1131 case DWC3_DEPEVT_RXTXFIFOEVT:
1132 case DWC3_DEPEVT_STREAMEVT:
1133 case DWC3_DEPEVT_EPCMDCMPLT:
1134 break;
1135 }
1136}