Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Functions to sequence PREFLUSH and FUA writes.
4 *
5 * Copyright (C) 2011 Max Planck Institute for Gravitational Physics
6 * Copyright (C) 2011 Tejun Heo <tj@kernel.org>
7 *
8 * REQ_{PREFLUSH|FUA} requests are decomposed to sequences consisted of three
9 * optional steps - PREFLUSH, DATA and POSTFLUSH - according to the request
10 * properties and hardware capability.
11 *
12 * If a request doesn't have data, only REQ_PREFLUSH makes sense, which
13 * indicates a simple flush request. If there is data, REQ_PREFLUSH indicates
14 * that the device cache should be flushed before the data is executed, and
15 * REQ_FUA means that the data must be on non-volatile media on request
16 * completion.
17 *
18 * If the device doesn't have writeback cache, PREFLUSH and FUA don't make any
19 * difference. The requests are either completed immediately if there's no data
20 * or executed as normal requests otherwise.
21 *
22 * If the device has writeback cache and supports FUA, REQ_PREFLUSH is
23 * translated to PREFLUSH but REQ_FUA is passed down directly with DATA.
24 *
25 * If the device has writeback cache and doesn't support FUA, REQ_PREFLUSH
26 * is translated to PREFLUSH and REQ_FUA to POSTFLUSH.
27 *
28 * The actual execution of flush is double buffered. Whenever a request
29 * needs to execute PRE or POSTFLUSH, it queues at
30 * fq->flush_queue[fq->flush_pending_idx]. Once certain criteria are met, a
31 * REQ_OP_FLUSH is issued and the pending_idx is toggled. When the flush
32 * completes, all the requests which were pending are proceeded to the next
33 * step. This allows arbitrary merging of different types of PREFLUSH/FUA
34 * requests.
35 *
36 * Currently, the following conditions are used to determine when to issue
37 * flush.
38 *
39 * C1. At any given time, only one flush shall be in progress. This makes
40 * double buffering sufficient.
41 *
42 * C2. Flush is deferred if any request is executing DATA of its sequence.
43 * This avoids issuing separate POSTFLUSHes for requests which shared
44 * PREFLUSH.
45 *
46 * C3. The second condition is ignored if there is a request which has
47 * waited longer than FLUSH_PENDING_TIMEOUT. This is to avoid
48 * starvation in the unlikely case where there are continuous stream of
49 * FUA (without PREFLUSH) requests.
50 *
51 * For devices which support FUA, it isn't clear whether C2 (and thus C3)
52 * is beneficial.
53 *
54 * Note that a sequenced PREFLUSH/FUA request with DATA is completed twice.
55 * Once while executing DATA and again after the whole sequence is
56 * complete. The first completion updates the contained bio but doesn't
57 * finish it so that the bio submitter is notified only after the whole
58 * sequence is complete. This is implemented by testing RQF_FLUSH_SEQ in
59 * req_bio_endio().
60 *
61 * The above peculiarity requires that each PREFLUSH/FUA request has only one
62 * bio attached to it, which is guaranteed as they aren't allowed to be
63 * merged in the usual way.
64 */
65
66#include <linux/kernel.h>
67#include <linux/module.h>
68#include <linux/bio.h>
69#include <linux/blkdev.h>
70#include <linux/gfp.h>
71#include <linux/blk-mq.h>
72#include <linux/part_stat.h>
73
74#include "blk.h"
75#include "blk-mq.h"
76#include "blk-mq-tag.h"
77#include "blk-mq-sched.h"
78
79/* PREFLUSH/FUA sequences */
80enum {
81 REQ_FSEQ_PREFLUSH = (1 << 0), /* pre-flushing in progress */
82 REQ_FSEQ_DATA = (1 << 1), /* data write in progress */
83 REQ_FSEQ_POSTFLUSH = (1 << 2), /* post-flushing in progress */
84 REQ_FSEQ_DONE = (1 << 3),
85
86 REQ_FSEQ_ACTIONS = REQ_FSEQ_PREFLUSH | REQ_FSEQ_DATA |
87 REQ_FSEQ_POSTFLUSH,
88
89 /*
90 * If flush has been pending longer than the following timeout,
91 * it's issued even if flush_data requests are still in flight.
92 */
93 FLUSH_PENDING_TIMEOUT = 5 * HZ,
94};
95
96static void blk_kick_flush(struct request_queue *q,
97 struct blk_flush_queue *fq, blk_opf_t flags);
98
99static inline struct blk_flush_queue *
100blk_get_flush_queue(struct request_queue *q, struct blk_mq_ctx *ctx)
101{
102 return blk_mq_map_queue(q, REQ_OP_FLUSH, ctx)->fq;
103}
104
105static unsigned int blk_flush_policy(unsigned long fflags, struct request *rq)
106{
107 unsigned int policy = 0;
108
109 if (blk_rq_sectors(rq))
110 policy |= REQ_FSEQ_DATA;
111
112 if (fflags & (1UL << QUEUE_FLAG_WC)) {
113 if (rq->cmd_flags & REQ_PREFLUSH)
114 policy |= REQ_FSEQ_PREFLUSH;
115 if (!(fflags & (1UL << QUEUE_FLAG_FUA)) &&
116 (rq->cmd_flags & REQ_FUA))
117 policy |= REQ_FSEQ_POSTFLUSH;
118 }
119 return policy;
120}
121
122static unsigned int blk_flush_cur_seq(struct request *rq)
123{
124 return 1 << ffz(rq->flush.seq);
125}
126
127static void blk_flush_restore_request(struct request *rq)
128{
129 /*
130 * After flush data completion, @rq->bio is %NULL but we need to
131 * complete the bio again. @rq->biotail is guaranteed to equal the
132 * original @rq->bio. Restore it.
133 */
134 rq->bio = rq->biotail;
135
136 /* make @rq a normal request */
137 rq->rq_flags &= ~RQF_FLUSH_SEQ;
138 rq->end_io = rq->flush.saved_end_io;
139}
140
141static void blk_flush_queue_rq(struct request *rq, bool add_front)
142{
143 blk_mq_add_to_requeue_list(rq, add_front, true);
144}
145
146static void blk_account_io_flush(struct request *rq)
147{
148 struct block_device *part = rq->q->disk->part0;
149
150 part_stat_lock();
151 part_stat_inc(part, ios[STAT_FLUSH]);
152 part_stat_add(part, nsecs[STAT_FLUSH],
153 ktime_get_ns() - rq->start_time_ns);
154 part_stat_unlock();
155}
156
157/**
158 * blk_flush_complete_seq - complete flush sequence
159 * @rq: PREFLUSH/FUA request being sequenced
160 * @fq: flush queue
161 * @seq: sequences to complete (mask of %REQ_FSEQ_*, can be zero)
162 * @error: whether an error occurred
163 *
164 * @rq just completed @seq part of its flush sequence, record the
165 * completion and trigger the next step.
166 *
167 * CONTEXT:
168 * spin_lock_irq(fq->mq_flush_lock)
169 */
170static void blk_flush_complete_seq(struct request *rq,
171 struct blk_flush_queue *fq,
172 unsigned int seq, blk_status_t error)
173{
174 struct request_queue *q = rq->q;
175 struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
176 blk_opf_t cmd_flags;
177
178 BUG_ON(rq->flush.seq & seq);
179 rq->flush.seq |= seq;
180 cmd_flags = rq->cmd_flags;
181
182 if (likely(!error))
183 seq = blk_flush_cur_seq(rq);
184 else
185 seq = REQ_FSEQ_DONE;
186
187 switch (seq) {
188 case REQ_FSEQ_PREFLUSH:
189 case REQ_FSEQ_POSTFLUSH:
190 /* queue for flush */
191 if (list_empty(pending))
192 fq->flush_pending_since = jiffies;
193 list_move_tail(&rq->flush.list, pending);
194 break;
195
196 case REQ_FSEQ_DATA:
197 list_move_tail(&rq->flush.list, &fq->flush_data_in_flight);
198 blk_flush_queue_rq(rq, true);
199 break;
200
201 case REQ_FSEQ_DONE:
202 /*
203 * @rq was previously adjusted by blk_insert_flush() for
204 * flush sequencing and may already have gone through the
205 * flush data request completion path. Restore @rq for
206 * normal completion and end it.
207 */
208 list_del_init(&rq->flush.list);
209 blk_flush_restore_request(rq);
210 blk_mq_end_request(rq, error);
211 break;
212
213 default:
214 BUG();
215 }
216
217 blk_kick_flush(q, fq, cmd_flags);
218}
219
220static enum rq_end_io_ret flush_end_io(struct request *flush_rq,
221 blk_status_t error)
222{
223 struct request_queue *q = flush_rq->q;
224 struct list_head *running;
225 struct request *rq, *n;
226 unsigned long flags = 0;
227 struct blk_flush_queue *fq = blk_get_flush_queue(q, flush_rq->mq_ctx);
228
229 /* release the tag's ownership to the req cloned from */
230 spin_lock_irqsave(&fq->mq_flush_lock, flags);
231
232 if (!req_ref_put_and_test(flush_rq)) {
233 fq->rq_status = error;
234 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
235 return RQ_END_IO_NONE;
236 }
237
238 blk_account_io_flush(flush_rq);
239 /*
240 * Flush request has to be marked as IDLE when it is really ended
241 * because its .end_io() is called from timeout code path too for
242 * avoiding use-after-free.
243 */
244 WRITE_ONCE(flush_rq->state, MQ_RQ_IDLE);
245 if (fq->rq_status != BLK_STS_OK) {
246 error = fq->rq_status;
247 fq->rq_status = BLK_STS_OK;
248 }
249
250 if (!q->elevator) {
251 flush_rq->tag = BLK_MQ_NO_TAG;
252 } else {
253 blk_mq_put_driver_tag(flush_rq);
254 flush_rq->internal_tag = BLK_MQ_NO_TAG;
255 }
256
257 running = &fq->flush_queue[fq->flush_running_idx];
258 BUG_ON(fq->flush_pending_idx == fq->flush_running_idx);
259
260 /* account completion of the flush request */
261 fq->flush_running_idx ^= 1;
262
263 /* and push the waiting requests to the next stage */
264 list_for_each_entry_safe(rq, n, running, flush.list) {
265 unsigned int seq = blk_flush_cur_seq(rq);
266
267 BUG_ON(seq != REQ_FSEQ_PREFLUSH && seq != REQ_FSEQ_POSTFLUSH);
268 blk_flush_complete_seq(rq, fq, seq, error);
269 }
270
271 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
272 return RQ_END_IO_NONE;
273}
274
275bool is_flush_rq(struct request *rq)
276{
277 return rq->end_io == flush_end_io;
278}
279
280/**
281 * blk_kick_flush - consider issuing flush request
282 * @q: request_queue being kicked
283 * @fq: flush queue
284 * @flags: cmd_flags of the original request
285 *
286 * Flush related states of @q have changed, consider issuing flush request.
287 * Please read the comment at the top of this file for more info.
288 *
289 * CONTEXT:
290 * spin_lock_irq(fq->mq_flush_lock)
291 *
292 */
293static void blk_kick_flush(struct request_queue *q, struct blk_flush_queue *fq,
294 blk_opf_t flags)
295{
296 struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
297 struct request *first_rq =
298 list_first_entry(pending, struct request, flush.list);
299 struct request *flush_rq = fq->flush_rq;
300
301 /* C1 described at the top of this file */
302 if (fq->flush_pending_idx != fq->flush_running_idx || list_empty(pending))
303 return;
304
305 /* C2 and C3 */
306 if (!list_empty(&fq->flush_data_in_flight) &&
307 time_before(jiffies,
308 fq->flush_pending_since + FLUSH_PENDING_TIMEOUT))
309 return;
310
311 /*
312 * Issue flush and toggle pending_idx. This makes pending_idx
313 * different from running_idx, which means flush is in flight.
314 */
315 fq->flush_pending_idx ^= 1;
316
317 blk_rq_init(q, flush_rq);
318
319 /*
320 * In case of none scheduler, borrow tag from the first request
321 * since they can't be in flight at the same time. And acquire
322 * the tag's ownership for flush req.
323 *
324 * In case of IO scheduler, flush rq need to borrow scheduler tag
325 * just for cheating put/get driver tag.
326 */
327 flush_rq->mq_ctx = first_rq->mq_ctx;
328 flush_rq->mq_hctx = first_rq->mq_hctx;
329
330 if (!q->elevator) {
331 flush_rq->tag = first_rq->tag;
332
333 /*
334 * We borrow data request's driver tag, so have to mark
335 * this flush request as INFLIGHT for avoiding double
336 * account of this driver tag
337 */
338 flush_rq->rq_flags |= RQF_MQ_INFLIGHT;
339 } else
340 flush_rq->internal_tag = first_rq->internal_tag;
341
342 flush_rq->cmd_flags = REQ_OP_FLUSH | REQ_PREFLUSH;
343 flush_rq->cmd_flags |= (flags & REQ_DRV) | (flags & REQ_FAILFAST_MASK);
344 flush_rq->rq_flags |= RQF_FLUSH_SEQ;
345 flush_rq->end_io = flush_end_io;
346 /*
347 * Order WRITE ->end_io and WRITE rq->ref, and its pair is the one
348 * implied in refcount_inc_not_zero() called from
349 * blk_mq_find_and_get_req(), which orders WRITE/READ flush_rq->ref
350 * and READ flush_rq->end_io
351 */
352 smp_wmb();
353 req_ref_set(flush_rq, 1);
354
355 blk_flush_queue_rq(flush_rq, false);
356}
357
358static enum rq_end_io_ret mq_flush_data_end_io(struct request *rq,
359 blk_status_t error)
360{
361 struct request_queue *q = rq->q;
362 struct blk_mq_hw_ctx *hctx = rq->mq_hctx;
363 struct blk_mq_ctx *ctx = rq->mq_ctx;
364 unsigned long flags;
365 struct blk_flush_queue *fq = blk_get_flush_queue(q, ctx);
366
367 if (q->elevator) {
368 WARN_ON(rq->tag < 0);
369 blk_mq_put_driver_tag(rq);
370 }
371
372 /*
373 * After populating an empty queue, kick it to avoid stall. Read
374 * the comment in flush_end_io().
375 */
376 spin_lock_irqsave(&fq->mq_flush_lock, flags);
377 blk_flush_complete_seq(rq, fq, REQ_FSEQ_DATA, error);
378 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
379
380 blk_mq_sched_restart(hctx);
381 return RQ_END_IO_NONE;
382}
383
384/**
385 * blk_insert_flush - insert a new PREFLUSH/FUA request
386 * @rq: request to insert
387 *
388 * To be called from __elv_add_request() for %ELEVATOR_INSERT_FLUSH insertions.
389 * or __blk_mq_run_hw_queue() to dispatch request.
390 * @rq is being submitted. Analyze what needs to be done and put it on the
391 * right queue.
392 */
393void blk_insert_flush(struct request *rq)
394{
395 struct request_queue *q = rq->q;
396 unsigned long fflags = q->queue_flags; /* may change, cache */
397 unsigned int policy = blk_flush_policy(fflags, rq);
398 struct blk_flush_queue *fq = blk_get_flush_queue(q, rq->mq_ctx);
399
400 /*
401 * @policy now records what operations need to be done. Adjust
402 * REQ_PREFLUSH and FUA for the driver.
403 */
404 rq->cmd_flags &= ~REQ_PREFLUSH;
405 if (!(fflags & (1UL << QUEUE_FLAG_FUA)))
406 rq->cmd_flags &= ~REQ_FUA;
407
408 /*
409 * REQ_PREFLUSH|REQ_FUA implies REQ_SYNC, so if we clear any
410 * of those flags, we have to set REQ_SYNC to avoid skewing
411 * the request accounting.
412 */
413 rq->cmd_flags |= REQ_SYNC;
414
415 /*
416 * An empty flush handed down from a stacking driver may
417 * translate into nothing if the underlying device does not
418 * advertise a write-back cache. In this case, simply
419 * complete the request.
420 */
421 if (!policy) {
422 blk_mq_end_request(rq, 0);
423 return;
424 }
425
426 BUG_ON(rq->bio != rq->biotail); /*assumes zero or single bio rq */
427
428 /*
429 * If there's data but flush is not necessary, the request can be
430 * processed directly without going through flush machinery. Queue
431 * for normal execution.
432 */
433 if ((policy & REQ_FSEQ_DATA) &&
434 !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
435 blk_mq_request_bypass_insert(rq, false, true);
436 return;
437 }
438
439 /*
440 * @rq should go through flush machinery. Mark it part of flush
441 * sequence and submit for further processing.
442 */
443 memset(&rq->flush, 0, sizeof(rq->flush));
444 INIT_LIST_HEAD(&rq->flush.list);
445 rq->rq_flags |= RQF_FLUSH_SEQ;
446 rq->flush.saved_end_io = rq->end_io; /* Usually NULL */
447
448 rq->end_io = mq_flush_data_end_io;
449
450 spin_lock_irq(&fq->mq_flush_lock);
451 blk_flush_complete_seq(rq, fq, REQ_FSEQ_ACTIONS & ~policy, 0);
452 spin_unlock_irq(&fq->mq_flush_lock);
453}
454
455/**
456 * blkdev_issue_flush - queue a flush
457 * @bdev: blockdev to issue flush for
458 *
459 * Description:
460 * Issue a flush for the block device in question.
461 */
462int blkdev_issue_flush(struct block_device *bdev)
463{
464 struct bio bio;
465
466 bio_init(&bio, bdev, NULL, 0, REQ_OP_WRITE | REQ_PREFLUSH);
467 return submit_bio_wait(&bio);
468}
469EXPORT_SYMBOL(blkdev_issue_flush);
470
471struct blk_flush_queue *blk_alloc_flush_queue(int node, int cmd_size,
472 gfp_t flags)
473{
474 struct blk_flush_queue *fq;
475 int rq_sz = sizeof(struct request);
476
477 fq = kzalloc_node(sizeof(*fq), flags, node);
478 if (!fq)
479 goto fail;
480
481 spin_lock_init(&fq->mq_flush_lock);
482
483 rq_sz = round_up(rq_sz + cmd_size, cache_line_size());
484 fq->flush_rq = kzalloc_node(rq_sz, flags, node);
485 if (!fq->flush_rq)
486 goto fail_rq;
487
488 INIT_LIST_HEAD(&fq->flush_queue[0]);
489 INIT_LIST_HEAD(&fq->flush_queue[1]);
490 INIT_LIST_HEAD(&fq->flush_data_in_flight);
491
492 return fq;
493
494 fail_rq:
495 kfree(fq);
496 fail:
497 return NULL;
498}
499
500void blk_free_flush_queue(struct blk_flush_queue *fq)
501{
502 /* bio based request queue hasn't flush queue */
503 if (!fq)
504 return;
505
506 kfree(fq->flush_rq);
507 kfree(fq);
508}
509
510/*
511 * Allow driver to set its own lock class to fq->mq_flush_lock for
512 * avoiding lockdep complaint.
513 *
514 * flush_end_io() may be called recursively from some driver, such as
515 * nvme-loop, so lockdep may complain 'possible recursive locking' because
516 * all 'struct blk_flush_queue' instance share same mq_flush_lock lock class
517 * key. We need to assign different lock class for these driver's
518 * fq->mq_flush_lock for avoiding the lockdep warning.
519 *
520 * Use dynamically allocated lock class key for each 'blk_flush_queue'
521 * instance is over-kill, and more worse it introduces horrible boot delay
522 * issue because synchronize_rcu() is implied in lockdep_unregister_key which
523 * is called for each hctx release. SCSI probing may synchronously create and
524 * destroy lots of MQ request_queues for non-existent devices, and some robot
525 * test kernel always enable lockdep option. It is observed that more than half
526 * an hour is taken during SCSI MQ probe with per-fq lock class.
527 */
528void blk_mq_hctx_set_fq_lock_class(struct blk_mq_hw_ctx *hctx,
529 struct lock_class_key *key)
530{
531 lockdep_set_class(&hctx->fq->mq_flush_lock, key);
532}
533EXPORT_SYMBOL_GPL(blk_mq_hctx_set_fq_lock_class);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Functions to sequence PREFLUSH and FUA writes.
4 *
5 * Copyright (C) 2011 Max Planck Institute for Gravitational Physics
6 * Copyright (C) 2011 Tejun Heo <tj@kernel.org>
7 *
8 * REQ_{PREFLUSH|FUA} requests are decomposed to sequences consisted of three
9 * optional steps - PREFLUSH, DATA and POSTFLUSH - according to the request
10 * properties and hardware capability.
11 *
12 * If a request doesn't have data, only REQ_PREFLUSH makes sense, which
13 * indicates a simple flush request. If there is data, REQ_PREFLUSH indicates
14 * that the device cache should be flushed before the data is executed, and
15 * REQ_FUA means that the data must be on non-volatile media on request
16 * completion.
17 *
18 * If the device doesn't have writeback cache, PREFLUSH and FUA don't make any
19 * difference. The requests are either completed immediately if there's no data
20 * or executed as normal requests otherwise.
21 *
22 * If the device has writeback cache and supports FUA, REQ_PREFLUSH is
23 * translated to PREFLUSH but REQ_FUA is passed down directly with DATA.
24 *
25 * If the device has writeback cache and doesn't support FUA, REQ_PREFLUSH
26 * is translated to PREFLUSH and REQ_FUA to POSTFLUSH.
27 *
28 * The actual execution of flush is double buffered. Whenever a request
29 * needs to execute PRE or POSTFLUSH, it queues at
30 * fq->flush_queue[fq->flush_pending_idx]. Once certain criteria are met, a
31 * REQ_OP_FLUSH is issued and the pending_idx is toggled. When the flush
32 * completes, all the requests which were pending are proceeded to the next
33 * step. This allows arbitrary merging of different types of PREFLUSH/FUA
34 * requests.
35 *
36 * Currently, the following conditions are used to determine when to issue
37 * flush.
38 *
39 * C1. At any given time, only one flush shall be in progress. This makes
40 * double buffering sufficient.
41 *
42 * C2. Flush is deferred if any request is executing DATA of its sequence.
43 * This avoids issuing separate POSTFLUSHes for requests which shared
44 * PREFLUSH.
45 *
46 * C3. The second condition is ignored if there is a request which has
47 * waited longer than FLUSH_PENDING_TIMEOUT. This is to avoid
48 * starvation in the unlikely case where there are continuous stream of
49 * FUA (without PREFLUSH) requests.
50 *
51 * For devices which support FUA, it isn't clear whether C2 (and thus C3)
52 * is beneficial.
53 *
54 * Note that a sequenced PREFLUSH/FUA request with DATA is completed twice.
55 * Once while executing DATA and again after the whole sequence is
56 * complete. The first completion updates the contained bio but doesn't
57 * finish it so that the bio submitter is notified only after the whole
58 * sequence is complete. This is implemented by testing RQF_FLUSH_SEQ in
59 * req_bio_endio().
60 *
61 * The above peculiarity requires that each PREFLUSH/FUA request has only one
62 * bio attached to it, which is guaranteed as they aren't allowed to be
63 * merged in the usual way.
64 */
65
66#include <linux/kernel.h>
67#include <linux/module.h>
68#include <linux/bio.h>
69#include <linux/blkdev.h>
70#include <linux/gfp.h>
71#include <linux/blk-mq.h>
72
73#include "blk.h"
74#include "blk-mq.h"
75#include "blk-mq-tag.h"
76#include "blk-mq-sched.h"
77
78/* PREFLUSH/FUA sequences */
79enum {
80 REQ_FSEQ_PREFLUSH = (1 << 0), /* pre-flushing in progress */
81 REQ_FSEQ_DATA = (1 << 1), /* data write in progress */
82 REQ_FSEQ_POSTFLUSH = (1 << 2), /* post-flushing in progress */
83 REQ_FSEQ_DONE = (1 << 3),
84
85 REQ_FSEQ_ACTIONS = REQ_FSEQ_PREFLUSH | REQ_FSEQ_DATA |
86 REQ_FSEQ_POSTFLUSH,
87
88 /*
89 * If flush has been pending longer than the following timeout,
90 * it's issued even if flush_data requests are still in flight.
91 */
92 FLUSH_PENDING_TIMEOUT = 5 * HZ,
93};
94
95static void blk_kick_flush(struct request_queue *q,
96 struct blk_flush_queue *fq, unsigned int flags);
97
98static unsigned int blk_flush_policy(unsigned long fflags, struct request *rq)
99{
100 unsigned int policy = 0;
101
102 if (blk_rq_sectors(rq))
103 policy |= REQ_FSEQ_DATA;
104
105 if (fflags & (1UL << QUEUE_FLAG_WC)) {
106 if (rq->cmd_flags & REQ_PREFLUSH)
107 policy |= REQ_FSEQ_PREFLUSH;
108 if (!(fflags & (1UL << QUEUE_FLAG_FUA)) &&
109 (rq->cmd_flags & REQ_FUA))
110 policy |= REQ_FSEQ_POSTFLUSH;
111 }
112 return policy;
113}
114
115static unsigned int blk_flush_cur_seq(struct request *rq)
116{
117 return 1 << ffz(rq->flush.seq);
118}
119
120static void blk_flush_restore_request(struct request *rq)
121{
122 /*
123 * After flush data completion, @rq->bio is %NULL but we need to
124 * complete the bio again. @rq->biotail is guaranteed to equal the
125 * original @rq->bio. Restore it.
126 */
127 rq->bio = rq->biotail;
128
129 /* make @rq a normal request */
130 rq->rq_flags &= ~RQF_FLUSH_SEQ;
131 rq->end_io = rq->flush.saved_end_io;
132}
133
134static void blk_flush_queue_rq(struct request *rq, bool add_front)
135{
136 blk_mq_add_to_requeue_list(rq, add_front, true);
137}
138
139/**
140 * blk_flush_complete_seq - complete flush sequence
141 * @rq: PREFLUSH/FUA request being sequenced
142 * @fq: flush queue
143 * @seq: sequences to complete (mask of %REQ_FSEQ_*, can be zero)
144 * @error: whether an error occurred
145 *
146 * @rq just completed @seq part of its flush sequence, record the
147 * completion and trigger the next step.
148 *
149 * CONTEXT:
150 * spin_lock_irq(fq->mq_flush_lock)
151 *
152 * RETURNS:
153 * %true if requests were added to the dispatch queue, %false otherwise.
154 */
155static void blk_flush_complete_seq(struct request *rq,
156 struct blk_flush_queue *fq,
157 unsigned int seq, blk_status_t error)
158{
159 struct request_queue *q = rq->q;
160 struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
161 unsigned int cmd_flags;
162
163 BUG_ON(rq->flush.seq & seq);
164 rq->flush.seq |= seq;
165 cmd_flags = rq->cmd_flags;
166
167 if (likely(!error))
168 seq = blk_flush_cur_seq(rq);
169 else
170 seq = REQ_FSEQ_DONE;
171
172 switch (seq) {
173 case REQ_FSEQ_PREFLUSH:
174 case REQ_FSEQ_POSTFLUSH:
175 /* queue for flush */
176 if (list_empty(pending))
177 fq->flush_pending_since = jiffies;
178 list_move_tail(&rq->flush.list, pending);
179 break;
180
181 case REQ_FSEQ_DATA:
182 list_move_tail(&rq->flush.list, &fq->flush_data_in_flight);
183 blk_flush_queue_rq(rq, true);
184 break;
185
186 case REQ_FSEQ_DONE:
187 /*
188 * @rq was previously adjusted by blk_flush_issue() for
189 * flush sequencing and may already have gone through the
190 * flush data request completion path. Restore @rq for
191 * normal completion and end it.
192 */
193 BUG_ON(!list_empty(&rq->queuelist));
194 list_del_init(&rq->flush.list);
195 blk_flush_restore_request(rq);
196 blk_mq_end_request(rq, error);
197 break;
198
199 default:
200 BUG();
201 }
202
203 blk_kick_flush(q, fq, cmd_flags);
204}
205
206static void flush_end_io(struct request *flush_rq, blk_status_t error)
207{
208 struct request_queue *q = flush_rq->q;
209 struct list_head *running;
210 struct request *rq, *n;
211 unsigned long flags = 0;
212 struct blk_flush_queue *fq = blk_get_flush_queue(q, flush_rq->mq_ctx);
213 struct blk_mq_hw_ctx *hctx;
214
215 /* release the tag's ownership to the req cloned from */
216 spin_lock_irqsave(&fq->mq_flush_lock, flags);
217
218 if (!refcount_dec_and_test(&flush_rq->ref)) {
219 fq->rq_status = error;
220 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
221 return;
222 }
223
224 if (fq->rq_status != BLK_STS_OK)
225 error = fq->rq_status;
226
227 hctx = flush_rq->mq_hctx;
228 if (!q->elevator) {
229 blk_mq_tag_set_rq(hctx, flush_rq->tag, fq->orig_rq);
230 flush_rq->tag = -1;
231 } else {
232 blk_mq_put_driver_tag(flush_rq);
233 flush_rq->internal_tag = -1;
234 }
235
236 running = &fq->flush_queue[fq->flush_running_idx];
237 BUG_ON(fq->flush_pending_idx == fq->flush_running_idx);
238
239 /* account completion of the flush request */
240 fq->flush_running_idx ^= 1;
241
242 /* and push the waiting requests to the next stage */
243 list_for_each_entry_safe(rq, n, running, flush.list) {
244 unsigned int seq = blk_flush_cur_seq(rq);
245
246 BUG_ON(seq != REQ_FSEQ_PREFLUSH && seq != REQ_FSEQ_POSTFLUSH);
247 blk_flush_complete_seq(rq, fq, seq, error);
248 }
249
250 fq->flush_queue_delayed = 0;
251 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
252}
253
254/**
255 * blk_kick_flush - consider issuing flush request
256 * @q: request_queue being kicked
257 * @fq: flush queue
258 * @flags: cmd_flags of the original request
259 *
260 * Flush related states of @q have changed, consider issuing flush request.
261 * Please read the comment at the top of this file for more info.
262 *
263 * CONTEXT:
264 * spin_lock_irq(fq->mq_flush_lock)
265 *
266 */
267static void blk_kick_flush(struct request_queue *q, struct blk_flush_queue *fq,
268 unsigned int flags)
269{
270 struct list_head *pending = &fq->flush_queue[fq->flush_pending_idx];
271 struct request *first_rq =
272 list_first_entry(pending, struct request, flush.list);
273 struct request *flush_rq = fq->flush_rq;
274
275 /* C1 described at the top of this file */
276 if (fq->flush_pending_idx != fq->flush_running_idx || list_empty(pending))
277 return;
278
279 /* C2 and C3
280 *
281 * For blk-mq + scheduling, we can risk having all driver tags
282 * assigned to empty flushes, and we deadlock if we are expecting
283 * other requests to make progress. Don't defer for that case.
284 */
285 if (!list_empty(&fq->flush_data_in_flight) && q->elevator &&
286 time_before(jiffies,
287 fq->flush_pending_since + FLUSH_PENDING_TIMEOUT))
288 return;
289
290 /*
291 * Issue flush and toggle pending_idx. This makes pending_idx
292 * different from running_idx, which means flush is in flight.
293 */
294 fq->flush_pending_idx ^= 1;
295
296 blk_rq_init(q, flush_rq);
297
298 /*
299 * In case of none scheduler, borrow tag from the first request
300 * since they can't be in flight at the same time. And acquire
301 * the tag's ownership for flush req.
302 *
303 * In case of IO scheduler, flush rq need to borrow scheduler tag
304 * just for cheating put/get driver tag.
305 */
306 flush_rq->mq_ctx = first_rq->mq_ctx;
307 flush_rq->mq_hctx = first_rq->mq_hctx;
308
309 if (!q->elevator) {
310 fq->orig_rq = first_rq;
311 flush_rq->tag = first_rq->tag;
312 blk_mq_tag_set_rq(flush_rq->mq_hctx, first_rq->tag, flush_rq);
313 } else {
314 flush_rq->internal_tag = first_rq->internal_tag;
315 }
316
317 flush_rq->cmd_flags = REQ_OP_FLUSH | REQ_PREFLUSH;
318 flush_rq->cmd_flags |= (flags & REQ_DRV) | (flags & REQ_FAILFAST_MASK);
319 flush_rq->rq_flags |= RQF_FLUSH_SEQ;
320 flush_rq->rq_disk = first_rq->rq_disk;
321 flush_rq->end_io = flush_end_io;
322
323 blk_flush_queue_rq(flush_rq, false);
324}
325
326static void mq_flush_data_end_io(struct request *rq, blk_status_t error)
327{
328 struct request_queue *q = rq->q;
329 struct blk_mq_hw_ctx *hctx = rq->mq_hctx;
330 struct blk_mq_ctx *ctx = rq->mq_ctx;
331 unsigned long flags;
332 struct blk_flush_queue *fq = blk_get_flush_queue(q, ctx);
333
334 if (q->elevator) {
335 WARN_ON(rq->tag < 0);
336 blk_mq_put_driver_tag(rq);
337 }
338
339 /*
340 * After populating an empty queue, kick it to avoid stall. Read
341 * the comment in flush_end_io().
342 */
343 spin_lock_irqsave(&fq->mq_flush_lock, flags);
344 blk_flush_complete_seq(rq, fq, REQ_FSEQ_DATA, error);
345 spin_unlock_irqrestore(&fq->mq_flush_lock, flags);
346
347 blk_mq_sched_restart(hctx);
348}
349
350/**
351 * blk_insert_flush - insert a new PREFLUSH/FUA request
352 * @rq: request to insert
353 *
354 * To be called from __elv_add_request() for %ELEVATOR_INSERT_FLUSH insertions.
355 * or __blk_mq_run_hw_queue() to dispatch request.
356 * @rq is being submitted. Analyze what needs to be done and put it on the
357 * right queue.
358 */
359void blk_insert_flush(struct request *rq)
360{
361 struct request_queue *q = rq->q;
362 unsigned long fflags = q->queue_flags; /* may change, cache */
363 unsigned int policy = blk_flush_policy(fflags, rq);
364 struct blk_flush_queue *fq = blk_get_flush_queue(q, rq->mq_ctx);
365
366 /*
367 * @policy now records what operations need to be done. Adjust
368 * REQ_PREFLUSH and FUA for the driver.
369 */
370 rq->cmd_flags &= ~REQ_PREFLUSH;
371 if (!(fflags & (1UL << QUEUE_FLAG_FUA)))
372 rq->cmd_flags &= ~REQ_FUA;
373
374 /*
375 * REQ_PREFLUSH|REQ_FUA implies REQ_SYNC, so if we clear any
376 * of those flags, we have to set REQ_SYNC to avoid skewing
377 * the request accounting.
378 */
379 rq->cmd_flags |= REQ_SYNC;
380
381 /*
382 * An empty flush handed down from a stacking driver may
383 * translate into nothing if the underlying device does not
384 * advertise a write-back cache. In this case, simply
385 * complete the request.
386 */
387 if (!policy) {
388 blk_mq_end_request(rq, 0);
389 return;
390 }
391
392 BUG_ON(rq->bio != rq->biotail); /*assumes zero or single bio rq */
393
394 /*
395 * If there's data but flush is not necessary, the request can be
396 * processed directly without going through flush machinery. Queue
397 * for normal execution.
398 */
399 if ((policy & REQ_FSEQ_DATA) &&
400 !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
401 blk_mq_request_bypass_insert(rq, false);
402 return;
403 }
404
405 /*
406 * @rq should go through flush machinery. Mark it part of flush
407 * sequence and submit for further processing.
408 */
409 memset(&rq->flush, 0, sizeof(rq->flush));
410 INIT_LIST_HEAD(&rq->flush.list);
411 rq->rq_flags |= RQF_FLUSH_SEQ;
412 rq->flush.saved_end_io = rq->end_io; /* Usually NULL */
413
414 rq->end_io = mq_flush_data_end_io;
415
416 spin_lock_irq(&fq->mq_flush_lock);
417 blk_flush_complete_seq(rq, fq, REQ_FSEQ_ACTIONS & ~policy, 0);
418 spin_unlock_irq(&fq->mq_flush_lock);
419}
420
421/**
422 * blkdev_issue_flush - queue a flush
423 * @bdev: blockdev to issue flush for
424 * @gfp_mask: memory allocation flags (for bio_alloc)
425 * @error_sector: error sector
426 *
427 * Description:
428 * Issue a flush for the block device in question. Caller can supply
429 * room for storing the error offset in case of a flush error, if they
430 * wish to.
431 */
432int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
433 sector_t *error_sector)
434{
435 struct request_queue *q;
436 struct bio *bio;
437 int ret = 0;
438
439 if (bdev->bd_disk == NULL)
440 return -ENXIO;
441
442 q = bdev_get_queue(bdev);
443 if (!q)
444 return -ENXIO;
445
446 /*
447 * some block devices may not have their queue correctly set up here
448 * (e.g. loop device without a backing file) and so issuing a flush
449 * here will panic. Ensure there is a request function before issuing
450 * the flush.
451 */
452 if (!q->make_request_fn)
453 return -ENXIO;
454
455 bio = bio_alloc(gfp_mask, 0);
456 bio_set_dev(bio, bdev);
457 bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH;
458
459 ret = submit_bio_wait(bio);
460
461 /*
462 * The driver must store the error location in ->bi_sector, if
463 * it supports it. For non-stacked drivers, this should be
464 * copied from blk_rq_pos(rq).
465 */
466 if (error_sector)
467 *error_sector = bio->bi_iter.bi_sector;
468
469 bio_put(bio);
470 return ret;
471}
472EXPORT_SYMBOL(blkdev_issue_flush);
473
474struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
475 int node, int cmd_size, gfp_t flags)
476{
477 struct blk_flush_queue *fq;
478 int rq_sz = sizeof(struct request);
479
480 fq = kzalloc_node(sizeof(*fq), flags, node);
481 if (!fq)
482 goto fail;
483
484 spin_lock_init(&fq->mq_flush_lock);
485
486 rq_sz = round_up(rq_sz + cmd_size, cache_line_size());
487 fq->flush_rq = kzalloc_node(rq_sz, flags, node);
488 if (!fq->flush_rq)
489 goto fail_rq;
490
491 INIT_LIST_HEAD(&fq->flush_queue[0]);
492 INIT_LIST_HEAD(&fq->flush_queue[1]);
493 INIT_LIST_HEAD(&fq->flush_data_in_flight);
494
495 return fq;
496
497 fail_rq:
498 kfree(fq);
499 fail:
500 return NULL;
501}
502
503void blk_free_flush_queue(struct blk_flush_queue *fq)
504{
505 /* bio based request queue hasn't flush queue */
506 if (!fq)
507 return;
508
509 kfree(fq->flush_rq);
510 kfree(fq);
511}