Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 1995 Linus Torvalds
4 *
5 * Pentium III FXSR, SSE support
6 * Gareth Hughes <gareth@valinux.com>, May 2000
7 *
8 * X86-64 port
9 * Andi Kleen.
10 *
11 * CPU hotplug support - ashok.raj@intel.com
12 */
13
14/*
15 * This file handles the architecture-dependent parts of process handling..
16 */
17
18#include <linux/cpu.h>
19#include <linux/errno.h>
20#include <linux/sched.h>
21#include <linux/sched/task.h>
22#include <linux/sched/task_stack.h>
23#include <linux/fs.h>
24#include <linux/kernel.h>
25#include <linux/mm.h>
26#include <linux/elfcore.h>
27#include <linux/smp.h>
28#include <linux/slab.h>
29#include <linux/user.h>
30#include <linux/interrupt.h>
31#include <linux/delay.h>
32#include <linux/export.h>
33#include <linux/ptrace.h>
34#include <linux/notifier.h>
35#include <linux/kprobes.h>
36#include <linux/kdebug.h>
37#include <linux/prctl.h>
38#include <linux/uaccess.h>
39#include <linux/io.h>
40#include <linux/ftrace.h>
41#include <linux/syscalls.h>
42#include <linux/iommu.h>
43
44#include <asm/processor.h>
45#include <asm/pkru.h>
46#include <asm/fpu/sched.h>
47#include <asm/mmu_context.h>
48#include <asm/prctl.h>
49#include <asm/desc.h>
50#include <asm/proto.h>
51#include <asm/ia32.h>
52#include <asm/debugreg.h>
53#include <asm/switch_to.h>
54#include <asm/xen/hypervisor.h>
55#include <asm/vdso.h>
56#include <asm/resctrl.h>
57#include <asm/unistd.h>
58#include <asm/fsgsbase.h>
59#include <asm/fred.h>
60#ifdef CONFIG_IA32_EMULATION
61/* Not included via unistd.h */
62#include <asm/unistd_32_ia32.h>
63#endif
64
65#include "process.h"
66
67/* Prints also some state that isn't saved in the pt_regs */
68void __show_regs(struct pt_regs *regs, enum show_regs_mode mode,
69 const char *log_lvl)
70{
71 unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs;
72 unsigned long d0, d1, d2, d3, d6, d7;
73 unsigned int fsindex, gsindex;
74 unsigned int ds, es;
75
76 show_iret_regs(regs, log_lvl);
77
78 if (regs->orig_ax != -1)
79 pr_cont(" ORIG_RAX: %016lx\n", regs->orig_ax);
80 else
81 pr_cont("\n");
82
83 printk("%sRAX: %016lx RBX: %016lx RCX: %016lx\n",
84 log_lvl, regs->ax, regs->bx, regs->cx);
85 printk("%sRDX: %016lx RSI: %016lx RDI: %016lx\n",
86 log_lvl, regs->dx, regs->si, regs->di);
87 printk("%sRBP: %016lx R08: %016lx R09: %016lx\n",
88 log_lvl, regs->bp, regs->r8, regs->r9);
89 printk("%sR10: %016lx R11: %016lx R12: %016lx\n",
90 log_lvl, regs->r10, regs->r11, regs->r12);
91 printk("%sR13: %016lx R14: %016lx R15: %016lx\n",
92 log_lvl, regs->r13, regs->r14, regs->r15);
93
94 if (mode == SHOW_REGS_SHORT)
95 return;
96
97 if (mode == SHOW_REGS_USER) {
98 rdmsrl(MSR_FS_BASE, fs);
99 rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
100 printk("%sFS: %016lx GS: %016lx\n",
101 log_lvl, fs, shadowgs);
102 return;
103 }
104
105 asm("movl %%ds,%0" : "=r" (ds));
106 asm("movl %%es,%0" : "=r" (es));
107 asm("movl %%fs,%0" : "=r" (fsindex));
108 asm("movl %%gs,%0" : "=r" (gsindex));
109
110 rdmsrl(MSR_FS_BASE, fs);
111 rdmsrl(MSR_GS_BASE, gs);
112 rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
113
114 cr0 = read_cr0();
115 cr2 = read_cr2();
116 cr3 = __read_cr3();
117 cr4 = __read_cr4();
118
119 printk("%sFS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
120 log_lvl, fs, fsindex, gs, gsindex, shadowgs);
121 printk("%sCS: %04x DS: %04x ES: %04x CR0: %016lx\n",
122 log_lvl, regs->cs, ds, es, cr0);
123 printk("%sCR2: %016lx CR3: %016lx CR4: %016lx\n",
124 log_lvl, cr2, cr3, cr4);
125
126 get_debugreg(d0, 0);
127 get_debugreg(d1, 1);
128 get_debugreg(d2, 2);
129 get_debugreg(d3, 3);
130 get_debugreg(d6, 6);
131 get_debugreg(d7, 7);
132
133 /* Only print out debug registers if they are in their non-default state. */
134 if (!((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
135 (d6 == DR6_RESERVED) && (d7 == 0x400))) {
136 printk("%sDR0: %016lx DR1: %016lx DR2: %016lx\n",
137 log_lvl, d0, d1, d2);
138 printk("%sDR3: %016lx DR6: %016lx DR7: %016lx\n",
139 log_lvl, d3, d6, d7);
140 }
141
142 if (cr4 & X86_CR4_PKE)
143 printk("%sPKRU: %08x\n", log_lvl, read_pkru());
144}
145
146void release_thread(struct task_struct *dead_task)
147{
148 WARN_ON(dead_task->mm);
149}
150
151enum which_selector {
152 FS,
153 GS
154};
155
156/*
157 * Out of line to be protected from kprobes and tracing. If this would be
158 * traced or probed than any access to a per CPU variable happens with
159 * the wrong GS.
160 *
161 * It is not used on Xen paravirt. When paravirt support is needed, it
162 * needs to be renamed with native_ prefix.
163 */
164static noinstr unsigned long __rdgsbase_inactive(void)
165{
166 unsigned long gsbase;
167
168 lockdep_assert_irqs_disabled();
169
170 /*
171 * SWAPGS is no longer needed thus NOT allowed with FRED because
172 * FRED transitions ensure that an operating system can _always_
173 * operate with its own GS base address:
174 * - For events that occur in ring 3, FRED event delivery swaps
175 * the GS base address with the IA32_KERNEL_GS_BASE MSR.
176 * - ERETU (the FRED transition that returns to ring 3) also swaps
177 * the GS base address with the IA32_KERNEL_GS_BASE MSR.
178 *
179 * And the operating system can still setup the GS segment for a
180 * user thread without the need of loading a user thread GS with:
181 * - Using LKGS, available with FRED, to modify other attributes
182 * of the GS segment without compromising its ability always to
183 * operate with its own GS base address.
184 * - Accessing the GS segment base address for a user thread as
185 * before using RDMSR or WRMSR on the IA32_KERNEL_GS_BASE MSR.
186 *
187 * Note, LKGS loads the GS base address into the IA32_KERNEL_GS_BASE
188 * MSR instead of the GS segment’s descriptor cache. As such, the
189 * operating system never changes its runtime GS base address.
190 */
191 if (!cpu_feature_enabled(X86_FEATURE_FRED) &&
192 !cpu_feature_enabled(X86_FEATURE_XENPV)) {
193 native_swapgs();
194 gsbase = rdgsbase();
195 native_swapgs();
196 } else {
197 instrumentation_begin();
198 rdmsrl(MSR_KERNEL_GS_BASE, gsbase);
199 instrumentation_end();
200 }
201
202 return gsbase;
203}
204
205/*
206 * Out of line to be protected from kprobes and tracing. If this would be
207 * traced or probed than any access to a per CPU variable happens with
208 * the wrong GS.
209 *
210 * It is not used on Xen paravirt. When paravirt support is needed, it
211 * needs to be renamed with native_ prefix.
212 */
213static noinstr void __wrgsbase_inactive(unsigned long gsbase)
214{
215 lockdep_assert_irqs_disabled();
216
217 if (!cpu_feature_enabled(X86_FEATURE_FRED) &&
218 !cpu_feature_enabled(X86_FEATURE_XENPV)) {
219 native_swapgs();
220 wrgsbase(gsbase);
221 native_swapgs();
222 } else {
223 instrumentation_begin();
224 wrmsrl(MSR_KERNEL_GS_BASE, gsbase);
225 instrumentation_end();
226 }
227}
228
229/*
230 * Saves the FS or GS base for an outgoing thread if FSGSBASE extensions are
231 * not available. The goal is to be reasonably fast on non-FSGSBASE systems.
232 * It's forcibly inlined because it'll generate better code and this function
233 * is hot.
234 */
235static __always_inline void save_base_legacy(struct task_struct *prev_p,
236 unsigned short selector,
237 enum which_selector which)
238{
239 if (likely(selector == 0)) {
240 /*
241 * On Intel (without X86_BUG_NULL_SEG), the segment base could
242 * be the pre-existing saved base or it could be zero. On AMD
243 * (with X86_BUG_NULL_SEG), the segment base could be almost
244 * anything.
245 *
246 * This branch is very hot (it's hit twice on almost every
247 * context switch between 64-bit programs), and avoiding
248 * the RDMSR helps a lot, so we just assume that whatever
249 * value is already saved is correct. This matches historical
250 * Linux behavior, so it won't break existing applications.
251 *
252 * To avoid leaking state, on non-X86_BUG_NULL_SEG CPUs, if we
253 * report that the base is zero, it needs to actually be zero:
254 * see the corresponding logic in load_seg_legacy.
255 */
256 } else {
257 /*
258 * If the selector is 1, 2, or 3, then the base is zero on
259 * !X86_BUG_NULL_SEG CPUs and could be anything on
260 * X86_BUG_NULL_SEG CPUs. In the latter case, Linux
261 * has never attempted to preserve the base across context
262 * switches.
263 *
264 * If selector > 3, then it refers to a real segment, and
265 * saving the base isn't necessary.
266 */
267 if (which == FS)
268 prev_p->thread.fsbase = 0;
269 else
270 prev_p->thread.gsbase = 0;
271 }
272}
273
274static __always_inline void save_fsgs(struct task_struct *task)
275{
276 savesegment(fs, task->thread.fsindex);
277 savesegment(gs, task->thread.gsindex);
278 if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
279 /*
280 * If FSGSBASE is enabled, we can't make any useful guesses
281 * about the base, and user code expects us to save the current
282 * value. Fortunately, reading the base directly is efficient.
283 */
284 task->thread.fsbase = rdfsbase();
285 task->thread.gsbase = __rdgsbase_inactive();
286 } else {
287 save_base_legacy(task, task->thread.fsindex, FS);
288 save_base_legacy(task, task->thread.gsindex, GS);
289 }
290}
291
292/*
293 * While a process is running,current->thread.fsbase and current->thread.gsbase
294 * may not match the corresponding CPU registers (see save_base_legacy()).
295 */
296void current_save_fsgs(void)
297{
298 unsigned long flags;
299
300 /* Interrupts need to be off for FSGSBASE */
301 local_irq_save(flags);
302 save_fsgs(current);
303 local_irq_restore(flags);
304}
305#if IS_ENABLED(CONFIG_KVM)
306EXPORT_SYMBOL_GPL(current_save_fsgs);
307#endif
308
309static __always_inline void loadseg(enum which_selector which,
310 unsigned short sel)
311{
312 if (which == FS)
313 loadsegment(fs, sel);
314 else
315 load_gs_index(sel);
316}
317
318static __always_inline void load_seg_legacy(unsigned short prev_index,
319 unsigned long prev_base,
320 unsigned short next_index,
321 unsigned long next_base,
322 enum which_selector which)
323{
324 if (likely(next_index <= 3)) {
325 /*
326 * The next task is using 64-bit TLS, is not using this
327 * segment at all, or is having fun with arcane CPU features.
328 */
329 if (next_base == 0) {
330 /*
331 * Nasty case: on AMD CPUs, we need to forcibly zero
332 * the base.
333 */
334 if (static_cpu_has_bug(X86_BUG_NULL_SEG)) {
335 loadseg(which, __USER_DS);
336 loadseg(which, next_index);
337 } else {
338 /*
339 * We could try to exhaustively detect cases
340 * under which we can skip the segment load,
341 * but there's really only one case that matters
342 * for performance: if both the previous and
343 * next states are fully zeroed, we can skip
344 * the load.
345 *
346 * (This assumes that prev_base == 0 has no
347 * false positives. This is the case on
348 * Intel-style CPUs.)
349 */
350 if (likely(prev_index | next_index | prev_base))
351 loadseg(which, next_index);
352 }
353 } else {
354 if (prev_index != next_index)
355 loadseg(which, next_index);
356 wrmsrl(which == FS ? MSR_FS_BASE : MSR_KERNEL_GS_BASE,
357 next_base);
358 }
359 } else {
360 /*
361 * The next task is using a real segment. Loading the selector
362 * is sufficient.
363 */
364 loadseg(which, next_index);
365 }
366}
367
368/*
369 * Store prev's PKRU value and load next's PKRU value if they differ. PKRU
370 * is not XSTATE managed on context switch because that would require a
371 * lookup in the task's FPU xsave buffer and require to keep that updated
372 * in various places.
373 */
374static __always_inline void x86_pkru_load(struct thread_struct *prev,
375 struct thread_struct *next)
376{
377 if (!cpu_feature_enabled(X86_FEATURE_OSPKE))
378 return;
379
380 /* Stash the prev task's value: */
381 prev->pkru = rdpkru();
382
383 /*
384 * PKRU writes are slightly expensive. Avoid them when not
385 * strictly necessary:
386 */
387 if (prev->pkru != next->pkru)
388 wrpkru(next->pkru);
389}
390
391static __always_inline void x86_fsgsbase_load(struct thread_struct *prev,
392 struct thread_struct *next)
393{
394 if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
395 /* Update the FS and GS selectors if they could have changed. */
396 if (unlikely(prev->fsindex || next->fsindex))
397 loadseg(FS, next->fsindex);
398 if (unlikely(prev->gsindex || next->gsindex))
399 loadseg(GS, next->gsindex);
400
401 /* Update the bases. */
402 wrfsbase(next->fsbase);
403 __wrgsbase_inactive(next->gsbase);
404 } else {
405 load_seg_legacy(prev->fsindex, prev->fsbase,
406 next->fsindex, next->fsbase, FS);
407 load_seg_legacy(prev->gsindex, prev->gsbase,
408 next->gsindex, next->gsbase, GS);
409 }
410}
411
412unsigned long x86_fsgsbase_read_task(struct task_struct *task,
413 unsigned short selector)
414{
415 unsigned short idx = selector >> 3;
416 unsigned long base;
417
418 if (likely((selector & SEGMENT_TI_MASK) == 0)) {
419 if (unlikely(idx >= GDT_ENTRIES))
420 return 0;
421
422 /*
423 * There are no user segments in the GDT with nonzero bases
424 * other than the TLS segments.
425 */
426 if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
427 return 0;
428
429 idx -= GDT_ENTRY_TLS_MIN;
430 base = get_desc_base(&task->thread.tls_array[idx]);
431 } else {
432#ifdef CONFIG_MODIFY_LDT_SYSCALL
433 struct ldt_struct *ldt;
434
435 /*
436 * If performance here mattered, we could protect the LDT
437 * with RCU. This is a slow path, though, so we can just
438 * take the mutex.
439 */
440 mutex_lock(&task->mm->context.lock);
441 ldt = task->mm->context.ldt;
442 if (unlikely(!ldt || idx >= ldt->nr_entries))
443 base = 0;
444 else
445 base = get_desc_base(ldt->entries + idx);
446 mutex_unlock(&task->mm->context.lock);
447#else
448 base = 0;
449#endif
450 }
451
452 return base;
453}
454
455unsigned long x86_gsbase_read_cpu_inactive(void)
456{
457 unsigned long gsbase;
458
459 if (boot_cpu_has(X86_FEATURE_FSGSBASE)) {
460 unsigned long flags;
461
462 local_irq_save(flags);
463 gsbase = __rdgsbase_inactive();
464 local_irq_restore(flags);
465 } else {
466 rdmsrl(MSR_KERNEL_GS_BASE, gsbase);
467 }
468
469 return gsbase;
470}
471
472void x86_gsbase_write_cpu_inactive(unsigned long gsbase)
473{
474 if (boot_cpu_has(X86_FEATURE_FSGSBASE)) {
475 unsigned long flags;
476
477 local_irq_save(flags);
478 __wrgsbase_inactive(gsbase);
479 local_irq_restore(flags);
480 } else {
481 wrmsrl(MSR_KERNEL_GS_BASE, gsbase);
482 }
483}
484
485unsigned long x86_fsbase_read_task(struct task_struct *task)
486{
487 unsigned long fsbase;
488
489 if (task == current)
490 fsbase = x86_fsbase_read_cpu();
491 else if (boot_cpu_has(X86_FEATURE_FSGSBASE) ||
492 (task->thread.fsindex == 0))
493 fsbase = task->thread.fsbase;
494 else
495 fsbase = x86_fsgsbase_read_task(task, task->thread.fsindex);
496
497 return fsbase;
498}
499
500unsigned long x86_gsbase_read_task(struct task_struct *task)
501{
502 unsigned long gsbase;
503
504 if (task == current)
505 gsbase = x86_gsbase_read_cpu_inactive();
506 else if (boot_cpu_has(X86_FEATURE_FSGSBASE) ||
507 (task->thread.gsindex == 0))
508 gsbase = task->thread.gsbase;
509 else
510 gsbase = x86_fsgsbase_read_task(task, task->thread.gsindex);
511
512 return gsbase;
513}
514
515void x86_fsbase_write_task(struct task_struct *task, unsigned long fsbase)
516{
517 WARN_ON_ONCE(task == current);
518
519 task->thread.fsbase = fsbase;
520}
521
522void x86_gsbase_write_task(struct task_struct *task, unsigned long gsbase)
523{
524 WARN_ON_ONCE(task == current);
525
526 task->thread.gsbase = gsbase;
527}
528
529static void
530start_thread_common(struct pt_regs *regs, unsigned long new_ip,
531 unsigned long new_sp,
532 u16 _cs, u16 _ss, u16 _ds)
533{
534 WARN_ON_ONCE(regs != current_pt_regs());
535
536 if (static_cpu_has(X86_BUG_NULL_SEG)) {
537 /* Loading zero below won't clear the base. */
538 loadsegment(fs, __USER_DS);
539 load_gs_index(__USER_DS);
540 }
541
542 reset_thread_features();
543
544 loadsegment(fs, 0);
545 loadsegment(es, _ds);
546 loadsegment(ds, _ds);
547 load_gs_index(0);
548
549 regs->ip = new_ip;
550 regs->sp = new_sp;
551 regs->csx = _cs;
552 regs->ssx = _ss;
553 /*
554 * Allow single-step trap and NMI when starting a new task, thus
555 * once the new task enters user space, single-step trap and NMI
556 * are both enabled immediately.
557 *
558 * Entering a new task is logically speaking a return from a
559 * system call (exec, fork, clone, etc.). As such, if ptrace
560 * enables single stepping a single step exception should be
561 * allowed to trigger immediately upon entering user space.
562 * This is not optional.
563 *
564 * NMI should *never* be disabled in user space. As such, this
565 * is an optional, opportunistic way to catch errors.
566 *
567 * Paranoia: High-order 48 bits above the lowest 16 bit SS are
568 * discarded by the legacy IRET instruction on all Intel, AMD,
569 * and Cyrix/Centaur/VIA CPUs, thus can be set unconditionally,
570 * even when FRED is not enabled. But we choose the safer side
571 * to use these bits only when FRED is enabled.
572 */
573 if (cpu_feature_enabled(X86_FEATURE_FRED)) {
574 regs->fred_ss.swevent = true;
575 regs->fred_ss.nmi = true;
576 }
577
578 regs->flags = X86_EFLAGS_IF | X86_EFLAGS_FIXED;
579}
580
581void
582start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
583{
584 start_thread_common(regs, new_ip, new_sp,
585 __USER_CS, __USER_DS, 0);
586}
587EXPORT_SYMBOL_GPL(start_thread);
588
589#ifdef CONFIG_COMPAT
590void compat_start_thread(struct pt_regs *regs, u32 new_ip, u32 new_sp, bool x32)
591{
592 start_thread_common(regs, new_ip, new_sp,
593 x32 ? __USER_CS : __USER32_CS,
594 __USER_DS, __USER_DS);
595}
596#endif
597
598/*
599 * switch_to(x,y) should switch tasks from x to y.
600 *
601 * This could still be optimized:
602 * - fold all the options into a flag word and test it with a single test.
603 * - could test fs/gs bitsliced
604 *
605 * Kprobes not supported here. Set the probe on schedule instead.
606 * Function graph tracer not supported too.
607 */
608__no_kmsan_checks
609__visible __notrace_funcgraph struct task_struct *
610__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
611{
612 struct thread_struct *prev = &prev_p->thread;
613 struct thread_struct *next = &next_p->thread;
614 int cpu = smp_processor_id();
615
616 WARN_ON_ONCE(IS_ENABLED(CONFIG_DEBUG_ENTRY) &&
617 this_cpu_read(pcpu_hot.hardirq_stack_inuse));
618
619 if (!test_tsk_thread_flag(prev_p, TIF_NEED_FPU_LOAD))
620 switch_fpu_prepare(prev_p, cpu);
621
622 /* We must save %fs and %gs before load_TLS() because
623 * %fs and %gs may be cleared by load_TLS().
624 *
625 * (e.g. xen_load_tls())
626 */
627 save_fsgs(prev_p);
628
629 /*
630 * Load TLS before restoring any segments so that segment loads
631 * reference the correct GDT entries.
632 */
633 load_TLS(next, cpu);
634
635 /*
636 * Leave lazy mode, flushing any hypercalls made here. This
637 * must be done after loading TLS entries in the GDT but before
638 * loading segments that might reference them.
639 */
640 arch_end_context_switch(next_p);
641
642 /* Switch DS and ES.
643 *
644 * Reading them only returns the selectors, but writing them (if
645 * nonzero) loads the full descriptor from the GDT or LDT. The
646 * LDT for next is loaded in switch_mm, and the GDT is loaded
647 * above.
648 *
649 * We therefore need to write new values to the segment
650 * registers on every context switch unless both the new and old
651 * values are zero.
652 *
653 * Note that we don't need to do anything for CS and SS, as
654 * those are saved and restored as part of pt_regs.
655 */
656 savesegment(es, prev->es);
657 if (unlikely(next->es | prev->es))
658 loadsegment(es, next->es);
659
660 savesegment(ds, prev->ds);
661 if (unlikely(next->ds | prev->ds))
662 loadsegment(ds, next->ds);
663
664 x86_fsgsbase_load(prev, next);
665
666 x86_pkru_load(prev, next);
667
668 /*
669 * Switch the PDA and FPU contexts.
670 */
671 raw_cpu_write(pcpu_hot.current_task, next_p);
672 raw_cpu_write(pcpu_hot.top_of_stack, task_top_of_stack(next_p));
673
674 switch_fpu_finish(next_p);
675
676 /* Reload sp0. */
677 update_task_stack(next_p);
678
679 switch_to_extra(prev_p, next_p);
680
681 if (static_cpu_has_bug(X86_BUG_SYSRET_SS_ATTRS)) {
682 /*
683 * AMD CPUs have a misfeature: SYSRET sets the SS selector but
684 * does not update the cached descriptor. As a result, if we
685 * do SYSRET while SS is NULL, we'll end up in user mode with
686 * SS apparently equal to __USER_DS but actually unusable.
687 *
688 * The straightforward workaround would be to fix it up just
689 * before SYSRET, but that would slow down the system call
690 * fast paths. Instead, we ensure that SS is never NULL in
691 * system call context. We do this by replacing NULL SS
692 * selectors at every context switch. SYSCALL sets up a valid
693 * SS, so the only way to get NULL is to re-enter the kernel
694 * from CPL 3 through an interrupt. Since that can't happen
695 * in the same task as a running syscall, we are guaranteed to
696 * context switch between every interrupt vector entry and a
697 * subsequent SYSRET.
698 *
699 * We read SS first because SS reads are much faster than
700 * writes. Out of caution, we force SS to __KERNEL_DS even if
701 * it previously had a different non-NULL value.
702 */
703 unsigned short ss_sel;
704 savesegment(ss, ss_sel);
705 if (ss_sel != __KERNEL_DS)
706 loadsegment(ss, __KERNEL_DS);
707 }
708
709 /* Load the Intel cache allocation PQR MSR. */
710 resctrl_sched_in(next_p);
711
712 return prev_p;
713}
714
715void set_personality_64bit(void)
716{
717 /* inherit personality from parent */
718
719 /* Make sure to be in 64bit mode */
720 clear_thread_flag(TIF_ADDR32);
721 /* Pretend that this comes from a 64bit execve */
722 task_pt_regs(current)->orig_ax = __NR_execve;
723 current_thread_info()->status &= ~TS_COMPAT;
724 if (current->mm)
725 __set_bit(MM_CONTEXT_HAS_VSYSCALL, ¤t->mm->context.flags);
726
727 /* TBD: overwrites user setup. Should have two bits.
728 But 64bit processes have always behaved this way,
729 so it's not too bad. The main problem is just that
730 32bit children are affected again. */
731 current->personality &= ~READ_IMPLIES_EXEC;
732}
733
734static void __set_personality_x32(void)
735{
736#ifdef CONFIG_X86_X32_ABI
737 if (current->mm)
738 current->mm->context.flags = 0;
739
740 current->personality &= ~READ_IMPLIES_EXEC;
741 /*
742 * in_32bit_syscall() uses the presence of the x32 syscall bit
743 * flag to determine compat status. The x86 mmap() code relies on
744 * the syscall bitness so set x32 syscall bit right here to make
745 * in_32bit_syscall() work during exec().
746 *
747 * Pretend to come from a x32 execve.
748 */
749 task_pt_regs(current)->orig_ax = __NR_x32_execve | __X32_SYSCALL_BIT;
750 current_thread_info()->status &= ~TS_COMPAT;
751#endif
752}
753
754static void __set_personality_ia32(void)
755{
756#ifdef CONFIG_IA32_EMULATION
757 if (current->mm) {
758 /*
759 * uprobes applied to this MM need to know this and
760 * cannot use user_64bit_mode() at that time.
761 */
762 __set_bit(MM_CONTEXT_UPROBE_IA32, ¤t->mm->context.flags);
763 }
764
765 current->personality |= force_personality32;
766 /* Prepare the first "return" to user space */
767 task_pt_regs(current)->orig_ax = __NR_ia32_execve;
768 current_thread_info()->status |= TS_COMPAT;
769#endif
770}
771
772void set_personality_ia32(bool x32)
773{
774 /* Make sure to be in 32bit mode */
775 set_thread_flag(TIF_ADDR32);
776
777 if (x32)
778 __set_personality_x32();
779 else
780 __set_personality_ia32();
781}
782EXPORT_SYMBOL_GPL(set_personality_ia32);
783
784#ifdef CONFIG_CHECKPOINT_RESTORE
785static long prctl_map_vdso(const struct vdso_image *image, unsigned long addr)
786{
787 int ret;
788
789 ret = map_vdso_once(image, addr);
790 if (ret)
791 return ret;
792
793 return (long)image->size;
794}
795#endif
796
797#ifdef CONFIG_ADDRESS_MASKING
798
799#define LAM_U57_BITS 6
800
801static void enable_lam_func(void *__mm)
802{
803 struct mm_struct *mm = __mm;
804 unsigned long lam;
805
806 if (this_cpu_read(cpu_tlbstate.loaded_mm) == mm) {
807 lam = mm_lam_cr3_mask(mm);
808 write_cr3(__read_cr3() | lam);
809 cpu_tlbstate_update_lam(lam, mm_untag_mask(mm));
810 }
811}
812
813static void mm_enable_lam(struct mm_struct *mm)
814{
815 mm->context.lam_cr3_mask = X86_CR3_LAM_U57;
816 mm->context.untag_mask = ~GENMASK(62, 57);
817
818 /*
819 * Even though the process must still be single-threaded at this
820 * point, kernel threads may be using the mm. IPI those kernel
821 * threads if they exist.
822 */
823 on_each_cpu_mask(mm_cpumask(mm), enable_lam_func, mm, true);
824 set_bit(MM_CONTEXT_LOCK_LAM, &mm->context.flags);
825}
826
827static int prctl_enable_tagged_addr(struct mm_struct *mm, unsigned long nr_bits)
828{
829 if (!cpu_feature_enabled(X86_FEATURE_LAM))
830 return -ENODEV;
831
832 /* PTRACE_ARCH_PRCTL */
833 if (current->mm != mm)
834 return -EINVAL;
835
836 if (mm_valid_pasid(mm) &&
837 !test_bit(MM_CONTEXT_FORCE_TAGGED_SVA, &mm->context.flags))
838 return -EINVAL;
839
840 if (mmap_write_lock_killable(mm))
841 return -EINTR;
842
843 /*
844 * MM_CONTEXT_LOCK_LAM is set on clone. Prevent LAM from
845 * being enabled unless the process is single threaded:
846 */
847 if (test_bit(MM_CONTEXT_LOCK_LAM, &mm->context.flags)) {
848 mmap_write_unlock(mm);
849 return -EBUSY;
850 }
851
852 if (!nr_bits || nr_bits > LAM_U57_BITS) {
853 mmap_write_unlock(mm);
854 return -EINVAL;
855 }
856
857 mm_enable_lam(mm);
858
859 mmap_write_unlock(mm);
860
861 return 0;
862}
863#endif
864
865long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2)
866{
867 int ret = 0;
868
869 switch (option) {
870 case ARCH_SET_GS: {
871 if (unlikely(arg2 >= TASK_SIZE_MAX))
872 return -EPERM;
873
874 preempt_disable();
875 /*
876 * ARCH_SET_GS has always overwritten the index
877 * and the base. Zero is the most sensible value
878 * to put in the index, and is the only value that
879 * makes any sense if FSGSBASE is unavailable.
880 */
881 if (task == current) {
882 loadseg(GS, 0);
883 x86_gsbase_write_cpu_inactive(arg2);
884
885 /*
886 * On non-FSGSBASE systems, save_base_legacy() expects
887 * that we also fill in thread.gsbase.
888 */
889 task->thread.gsbase = arg2;
890
891 } else {
892 task->thread.gsindex = 0;
893 x86_gsbase_write_task(task, arg2);
894 }
895 preempt_enable();
896 break;
897 }
898 case ARCH_SET_FS: {
899 /*
900 * Not strictly needed for %fs, but do it for symmetry
901 * with %gs
902 */
903 if (unlikely(arg2 >= TASK_SIZE_MAX))
904 return -EPERM;
905
906 preempt_disable();
907 /*
908 * Set the selector to 0 for the same reason
909 * as %gs above.
910 */
911 if (task == current) {
912 loadseg(FS, 0);
913 x86_fsbase_write_cpu(arg2);
914
915 /*
916 * On non-FSGSBASE systems, save_base_legacy() expects
917 * that we also fill in thread.fsbase.
918 */
919 task->thread.fsbase = arg2;
920 } else {
921 task->thread.fsindex = 0;
922 x86_fsbase_write_task(task, arg2);
923 }
924 preempt_enable();
925 break;
926 }
927 case ARCH_GET_FS: {
928 unsigned long base = x86_fsbase_read_task(task);
929
930 ret = put_user(base, (unsigned long __user *)arg2);
931 break;
932 }
933 case ARCH_GET_GS: {
934 unsigned long base = x86_gsbase_read_task(task);
935
936 ret = put_user(base, (unsigned long __user *)arg2);
937 break;
938 }
939
940#ifdef CONFIG_CHECKPOINT_RESTORE
941# ifdef CONFIG_X86_X32_ABI
942 case ARCH_MAP_VDSO_X32:
943 return prctl_map_vdso(&vdso_image_x32, arg2);
944# endif
945# if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
946 case ARCH_MAP_VDSO_32:
947 return prctl_map_vdso(&vdso_image_32, arg2);
948# endif
949 case ARCH_MAP_VDSO_64:
950 return prctl_map_vdso(&vdso_image_64, arg2);
951#endif
952#ifdef CONFIG_ADDRESS_MASKING
953 case ARCH_GET_UNTAG_MASK:
954 return put_user(task->mm->context.untag_mask,
955 (unsigned long __user *)arg2);
956 case ARCH_ENABLE_TAGGED_ADDR:
957 return prctl_enable_tagged_addr(task->mm, arg2);
958 case ARCH_FORCE_TAGGED_SVA:
959 if (current != task)
960 return -EINVAL;
961 set_bit(MM_CONTEXT_FORCE_TAGGED_SVA, &task->mm->context.flags);
962 return 0;
963 case ARCH_GET_MAX_TAG_BITS:
964 if (!cpu_feature_enabled(X86_FEATURE_LAM))
965 return put_user(0, (unsigned long __user *)arg2);
966 else
967 return put_user(LAM_U57_BITS, (unsigned long __user *)arg2);
968#endif
969 case ARCH_SHSTK_ENABLE:
970 case ARCH_SHSTK_DISABLE:
971 case ARCH_SHSTK_LOCK:
972 case ARCH_SHSTK_UNLOCK:
973 case ARCH_SHSTK_STATUS:
974 return shstk_prctl(task, option, arg2);
975 default:
976 ret = -EINVAL;
977 break;
978 }
979
980 return ret;
981}
982
983SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2)
984{
985 long ret;
986
987 ret = do_arch_prctl_64(current, option, arg2);
988 if (ret == -EINVAL)
989 ret = do_arch_prctl_common(option, arg2);
990
991 return ret;
992}
993
994#ifdef CONFIG_IA32_EMULATION
995COMPAT_SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2)
996{
997 return do_arch_prctl_common(option, arg2);
998}
999#endif
1000
1001unsigned long KSTK_ESP(struct task_struct *task)
1002{
1003 return task_pt_regs(task)->sp;
1004}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 1995 Linus Torvalds
4 *
5 * Pentium III FXSR, SSE support
6 * Gareth Hughes <gareth@valinux.com>, May 2000
7 *
8 * X86-64 port
9 * Andi Kleen.
10 *
11 * CPU hotplug support - ashok.raj@intel.com
12 */
13
14/*
15 * This file handles the architecture-dependent parts of process handling..
16 */
17
18#include <linux/cpu.h>
19#include <linux/errno.h>
20#include <linux/sched.h>
21#include <linux/sched/task.h>
22#include <linux/sched/task_stack.h>
23#include <linux/fs.h>
24#include <linux/kernel.h>
25#include <linux/mm.h>
26#include <linux/elfcore.h>
27#include <linux/smp.h>
28#include <linux/slab.h>
29#include <linux/user.h>
30#include <linux/interrupt.h>
31#include <linux/delay.h>
32#include <linux/export.h>
33#include <linux/ptrace.h>
34#include <linux/notifier.h>
35#include <linux/kprobes.h>
36#include <linux/kdebug.h>
37#include <linux/prctl.h>
38#include <linux/uaccess.h>
39#include <linux/io.h>
40#include <linux/ftrace.h>
41#include <linux/syscalls.h>
42
43#include <asm/processor.h>
44#include <asm/fpu/internal.h>
45#include <asm/mmu_context.h>
46#include <asm/prctl.h>
47#include <asm/desc.h>
48#include <asm/proto.h>
49#include <asm/ia32.h>
50#include <asm/debugreg.h>
51#include <asm/switch_to.h>
52#include <asm/xen/hypervisor.h>
53#include <asm/vdso.h>
54#include <asm/resctrl.h>
55#include <asm/unistd.h>
56#include <asm/fsgsbase.h>
57#ifdef CONFIG_IA32_EMULATION
58/* Not included via unistd.h */
59#include <asm/unistd_32_ia32.h>
60#endif
61
62#include "process.h"
63
64/* Prints also some state that isn't saved in the pt_regs */
65void __show_regs(struct pt_regs *regs, enum show_regs_mode mode,
66 const char *log_lvl)
67{
68 unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs;
69 unsigned long d0, d1, d2, d3, d6, d7;
70 unsigned int fsindex, gsindex;
71 unsigned int ds, es;
72
73 show_iret_regs(regs, log_lvl);
74
75 if (regs->orig_ax != -1)
76 pr_cont(" ORIG_RAX: %016lx\n", regs->orig_ax);
77 else
78 pr_cont("\n");
79
80 printk("%sRAX: %016lx RBX: %016lx RCX: %016lx\n",
81 log_lvl, regs->ax, regs->bx, regs->cx);
82 printk("%sRDX: %016lx RSI: %016lx RDI: %016lx\n",
83 log_lvl, regs->dx, regs->si, regs->di);
84 printk("%sRBP: %016lx R08: %016lx R09: %016lx\n",
85 log_lvl, regs->bp, regs->r8, regs->r9);
86 printk("%sR10: %016lx R11: %016lx R12: %016lx\n",
87 log_lvl, regs->r10, regs->r11, regs->r12);
88 printk("%sR13: %016lx R14: %016lx R15: %016lx\n",
89 log_lvl, regs->r13, regs->r14, regs->r15);
90
91 if (mode == SHOW_REGS_SHORT)
92 return;
93
94 if (mode == SHOW_REGS_USER) {
95 rdmsrl(MSR_FS_BASE, fs);
96 rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
97 printk("%sFS: %016lx GS: %016lx\n",
98 log_lvl, fs, shadowgs);
99 return;
100 }
101
102 asm("movl %%ds,%0" : "=r" (ds));
103 asm("movl %%es,%0" : "=r" (es));
104 asm("movl %%fs,%0" : "=r" (fsindex));
105 asm("movl %%gs,%0" : "=r" (gsindex));
106
107 rdmsrl(MSR_FS_BASE, fs);
108 rdmsrl(MSR_GS_BASE, gs);
109 rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
110
111 cr0 = read_cr0();
112 cr2 = read_cr2();
113 cr3 = __read_cr3();
114 cr4 = __read_cr4();
115
116 printk("%sFS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
117 log_lvl, fs, fsindex, gs, gsindex, shadowgs);
118 printk("%sCS: %04lx DS: %04x ES: %04x CR0: %016lx\n",
119 log_lvl, regs->cs, ds, es, cr0);
120 printk("%sCR2: %016lx CR3: %016lx CR4: %016lx\n",
121 log_lvl, cr2, cr3, cr4);
122
123 get_debugreg(d0, 0);
124 get_debugreg(d1, 1);
125 get_debugreg(d2, 2);
126 get_debugreg(d3, 3);
127 get_debugreg(d6, 6);
128 get_debugreg(d7, 7);
129
130 /* Only print out debug registers if they are in their non-default state. */
131 if (!((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
132 (d6 == DR6_RESERVED) && (d7 == 0x400))) {
133 printk("%sDR0: %016lx DR1: %016lx DR2: %016lx\n",
134 log_lvl, d0, d1, d2);
135 printk("%sDR3: %016lx DR6: %016lx DR7: %016lx\n",
136 log_lvl, d3, d6, d7);
137 }
138
139 if (boot_cpu_has(X86_FEATURE_OSPKE))
140 printk("%sPKRU: %08x\n", log_lvl, read_pkru());
141}
142
143void release_thread(struct task_struct *dead_task)
144{
145 WARN_ON(dead_task->mm);
146}
147
148enum which_selector {
149 FS,
150 GS
151};
152
153/*
154 * Out of line to be protected from kprobes and tracing. If this would be
155 * traced or probed than any access to a per CPU variable happens with
156 * the wrong GS.
157 *
158 * It is not used on Xen paravirt. When paravirt support is needed, it
159 * needs to be renamed with native_ prefix.
160 */
161static noinstr unsigned long __rdgsbase_inactive(void)
162{
163 unsigned long gsbase;
164
165 lockdep_assert_irqs_disabled();
166
167 if (!static_cpu_has(X86_FEATURE_XENPV)) {
168 native_swapgs();
169 gsbase = rdgsbase();
170 native_swapgs();
171 } else {
172 instrumentation_begin();
173 rdmsrl(MSR_KERNEL_GS_BASE, gsbase);
174 instrumentation_end();
175 }
176
177 return gsbase;
178}
179
180/*
181 * Out of line to be protected from kprobes and tracing. If this would be
182 * traced or probed than any access to a per CPU variable happens with
183 * the wrong GS.
184 *
185 * It is not used on Xen paravirt. When paravirt support is needed, it
186 * needs to be renamed with native_ prefix.
187 */
188static noinstr void __wrgsbase_inactive(unsigned long gsbase)
189{
190 lockdep_assert_irqs_disabled();
191
192 if (!static_cpu_has(X86_FEATURE_XENPV)) {
193 native_swapgs();
194 wrgsbase(gsbase);
195 native_swapgs();
196 } else {
197 instrumentation_begin();
198 wrmsrl(MSR_KERNEL_GS_BASE, gsbase);
199 instrumentation_end();
200 }
201}
202
203/*
204 * Saves the FS or GS base for an outgoing thread if FSGSBASE extensions are
205 * not available. The goal is to be reasonably fast on non-FSGSBASE systems.
206 * It's forcibly inlined because it'll generate better code and this function
207 * is hot.
208 */
209static __always_inline void save_base_legacy(struct task_struct *prev_p,
210 unsigned short selector,
211 enum which_selector which)
212{
213 if (likely(selector == 0)) {
214 /*
215 * On Intel (without X86_BUG_NULL_SEG), the segment base could
216 * be the pre-existing saved base or it could be zero. On AMD
217 * (with X86_BUG_NULL_SEG), the segment base could be almost
218 * anything.
219 *
220 * This branch is very hot (it's hit twice on almost every
221 * context switch between 64-bit programs), and avoiding
222 * the RDMSR helps a lot, so we just assume that whatever
223 * value is already saved is correct. This matches historical
224 * Linux behavior, so it won't break existing applications.
225 *
226 * To avoid leaking state, on non-X86_BUG_NULL_SEG CPUs, if we
227 * report that the base is zero, it needs to actually be zero:
228 * see the corresponding logic in load_seg_legacy.
229 */
230 } else {
231 /*
232 * If the selector is 1, 2, or 3, then the base is zero on
233 * !X86_BUG_NULL_SEG CPUs and could be anything on
234 * X86_BUG_NULL_SEG CPUs. In the latter case, Linux
235 * has never attempted to preserve the base across context
236 * switches.
237 *
238 * If selector > 3, then it refers to a real segment, and
239 * saving the base isn't necessary.
240 */
241 if (which == FS)
242 prev_p->thread.fsbase = 0;
243 else
244 prev_p->thread.gsbase = 0;
245 }
246}
247
248static __always_inline void save_fsgs(struct task_struct *task)
249{
250 savesegment(fs, task->thread.fsindex);
251 savesegment(gs, task->thread.gsindex);
252 if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
253 /*
254 * If FSGSBASE is enabled, we can't make any useful guesses
255 * about the base, and user code expects us to save the current
256 * value. Fortunately, reading the base directly is efficient.
257 */
258 task->thread.fsbase = rdfsbase();
259 task->thread.gsbase = __rdgsbase_inactive();
260 } else {
261 save_base_legacy(task, task->thread.fsindex, FS);
262 save_base_legacy(task, task->thread.gsindex, GS);
263 }
264}
265
266/*
267 * While a process is running,current->thread.fsbase and current->thread.gsbase
268 * may not match the corresponding CPU registers (see save_base_legacy()).
269 */
270void current_save_fsgs(void)
271{
272 unsigned long flags;
273
274 /* Interrupts need to be off for FSGSBASE */
275 local_irq_save(flags);
276 save_fsgs(current);
277 local_irq_restore(flags);
278}
279#if IS_ENABLED(CONFIG_KVM)
280EXPORT_SYMBOL_GPL(current_save_fsgs);
281#endif
282
283static __always_inline void loadseg(enum which_selector which,
284 unsigned short sel)
285{
286 if (which == FS)
287 loadsegment(fs, sel);
288 else
289 load_gs_index(sel);
290}
291
292static __always_inline void load_seg_legacy(unsigned short prev_index,
293 unsigned long prev_base,
294 unsigned short next_index,
295 unsigned long next_base,
296 enum which_selector which)
297{
298 if (likely(next_index <= 3)) {
299 /*
300 * The next task is using 64-bit TLS, is not using this
301 * segment at all, or is having fun with arcane CPU features.
302 */
303 if (next_base == 0) {
304 /*
305 * Nasty case: on AMD CPUs, we need to forcibly zero
306 * the base.
307 */
308 if (static_cpu_has_bug(X86_BUG_NULL_SEG)) {
309 loadseg(which, __USER_DS);
310 loadseg(which, next_index);
311 } else {
312 /*
313 * We could try to exhaustively detect cases
314 * under which we can skip the segment load,
315 * but there's really only one case that matters
316 * for performance: if both the previous and
317 * next states are fully zeroed, we can skip
318 * the load.
319 *
320 * (This assumes that prev_base == 0 has no
321 * false positives. This is the case on
322 * Intel-style CPUs.)
323 */
324 if (likely(prev_index | next_index | prev_base))
325 loadseg(which, next_index);
326 }
327 } else {
328 if (prev_index != next_index)
329 loadseg(which, next_index);
330 wrmsrl(which == FS ? MSR_FS_BASE : MSR_KERNEL_GS_BASE,
331 next_base);
332 }
333 } else {
334 /*
335 * The next task is using a real segment. Loading the selector
336 * is sufficient.
337 */
338 loadseg(which, next_index);
339 }
340}
341
342static __always_inline void x86_fsgsbase_load(struct thread_struct *prev,
343 struct thread_struct *next)
344{
345 if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
346 /* Update the FS and GS selectors if they could have changed. */
347 if (unlikely(prev->fsindex || next->fsindex))
348 loadseg(FS, next->fsindex);
349 if (unlikely(prev->gsindex || next->gsindex))
350 loadseg(GS, next->gsindex);
351
352 /* Update the bases. */
353 wrfsbase(next->fsbase);
354 __wrgsbase_inactive(next->gsbase);
355 } else {
356 load_seg_legacy(prev->fsindex, prev->fsbase,
357 next->fsindex, next->fsbase, FS);
358 load_seg_legacy(prev->gsindex, prev->gsbase,
359 next->gsindex, next->gsbase, GS);
360 }
361}
362
363unsigned long x86_fsgsbase_read_task(struct task_struct *task,
364 unsigned short selector)
365{
366 unsigned short idx = selector >> 3;
367 unsigned long base;
368
369 if (likely((selector & SEGMENT_TI_MASK) == 0)) {
370 if (unlikely(idx >= GDT_ENTRIES))
371 return 0;
372
373 /*
374 * There are no user segments in the GDT with nonzero bases
375 * other than the TLS segments.
376 */
377 if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
378 return 0;
379
380 idx -= GDT_ENTRY_TLS_MIN;
381 base = get_desc_base(&task->thread.tls_array[idx]);
382 } else {
383#ifdef CONFIG_MODIFY_LDT_SYSCALL
384 struct ldt_struct *ldt;
385
386 /*
387 * If performance here mattered, we could protect the LDT
388 * with RCU. This is a slow path, though, so we can just
389 * take the mutex.
390 */
391 mutex_lock(&task->mm->context.lock);
392 ldt = task->mm->context.ldt;
393 if (unlikely(!ldt || idx >= ldt->nr_entries))
394 base = 0;
395 else
396 base = get_desc_base(ldt->entries + idx);
397 mutex_unlock(&task->mm->context.lock);
398#else
399 base = 0;
400#endif
401 }
402
403 return base;
404}
405
406unsigned long x86_gsbase_read_cpu_inactive(void)
407{
408 unsigned long gsbase;
409
410 if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
411 unsigned long flags;
412
413 local_irq_save(flags);
414 gsbase = __rdgsbase_inactive();
415 local_irq_restore(flags);
416 } else {
417 rdmsrl(MSR_KERNEL_GS_BASE, gsbase);
418 }
419
420 return gsbase;
421}
422
423void x86_gsbase_write_cpu_inactive(unsigned long gsbase)
424{
425 if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
426 unsigned long flags;
427
428 local_irq_save(flags);
429 __wrgsbase_inactive(gsbase);
430 local_irq_restore(flags);
431 } else {
432 wrmsrl(MSR_KERNEL_GS_BASE, gsbase);
433 }
434}
435
436unsigned long x86_fsbase_read_task(struct task_struct *task)
437{
438 unsigned long fsbase;
439
440 if (task == current)
441 fsbase = x86_fsbase_read_cpu();
442 else if (static_cpu_has(X86_FEATURE_FSGSBASE) ||
443 (task->thread.fsindex == 0))
444 fsbase = task->thread.fsbase;
445 else
446 fsbase = x86_fsgsbase_read_task(task, task->thread.fsindex);
447
448 return fsbase;
449}
450
451unsigned long x86_gsbase_read_task(struct task_struct *task)
452{
453 unsigned long gsbase;
454
455 if (task == current)
456 gsbase = x86_gsbase_read_cpu_inactive();
457 else if (static_cpu_has(X86_FEATURE_FSGSBASE) ||
458 (task->thread.gsindex == 0))
459 gsbase = task->thread.gsbase;
460 else
461 gsbase = x86_fsgsbase_read_task(task, task->thread.gsindex);
462
463 return gsbase;
464}
465
466void x86_fsbase_write_task(struct task_struct *task, unsigned long fsbase)
467{
468 WARN_ON_ONCE(task == current);
469
470 task->thread.fsbase = fsbase;
471}
472
473void x86_gsbase_write_task(struct task_struct *task, unsigned long gsbase)
474{
475 WARN_ON_ONCE(task == current);
476
477 task->thread.gsbase = gsbase;
478}
479
480static void
481start_thread_common(struct pt_regs *regs, unsigned long new_ip,
482 unsigned long new_sp,
483 unsigned int _cs, unsigned int _ss, unsigned int _ds)
484{
485 WARN_ON_ONCE(regs != current_pt_regs());
486
487 if (static_cpu_has(X86_BUG_NULL_SEG)) {
488 /* Loading zero below won't clear the base. */
489 loadsegment(fs, __USER_DS);
490 load_gs_index(__USER_DS);
491 }
492
493 loadsegment(fs, 0);
494 loadsegment(es, _ds);
495 loadsegment(ds, _ds);
496 load_gs_index(0);
497
498 regs->ip = new_ip;
499 regs->sp = new_sp;
500 regs->cs = _cs;
501 regs->ss = _ss;
502 regs->flags = X86_EFLAGS_IF;
503}
504
505void
506start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
507{
508 start_thread_common(regs, new_ip, new_sp,
509 __USER_CS, __USER_DS, 0);
510}
511EXPORT_SYMBOL_GPL(start_thread);
512
513#ifdef CONFIG_COMPAT
514void compat_start_thread(struct pt_regs *regs, u32 new_ip, u32 new_sp)
515{
516 start_thread_common(regs, new_ip, new_sp,
517 test_thread_flag(TIF_X32)
518 ? __USER_CS : __USER32_CS,
519 __USER_DS, __USER_DS);
520}
521#endif
522
523/*
524 * switch_to(x,y) should switch tasks from x to y.
525 *
526 * This could still be optimized:
527 * - fold all the options into a flag word and test it with a single test.
528 * - could test fs/gs bitsliced
529 *
530 * Kprobes not supported here. Set the probe on schedule instead.
531 * Function graph tracer not supported too.
532 */
533__visible __notrace_funcgraph struct task_struct *
534__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
535{
536 struct thread_struct *prev = &prev_p->thread;
537 struct thread_struct *next = &next_p->thread;
538 struct fpu *prev_fpu = &prev->fpu;
539 struct fpu *next_fpu = &next->fpu;
540 int cpu = smp_processor_id();
541
542 WARN_ON_ONCE(IS_ENABLED(CONFIG_DEBUG_ENTRY) &&
543 this_cpu_read(irq_count) != -1);
544
545 if (!test_thread_flag(TIF_NEED_FPU_LOAD))
546 switch_fpu_prepare(prev_fpu, cpu);
547
548 /* We must save %fs and %gs before load_TLS() because
549 * %fs and %gs may be cleared by load_TLS().
550 *
551 * (e.g. xen_load_tls())
552 */
553 save_fsgs(prev_p);
554
555 /*
556 * Load TLS before restoring any segments so that segment loads
557 * reference the correct GDT entries.
558 */
559 load_TLS(next, cpu);
560
561 /*
562 * Leave lazy mode, flushing any hypercalls made here. This
563 * must be done after loading TLS entries in the GDT but before
564 * loading segments that might reference them.
565 */
566 arch_end_context_switch(next_p);
567
568 /* Switch DS and ES.
569 *
570 * Reading them only returns the selectors, but writing them (if
571 * nonzero) loads the full descriptor from the GDT or LDT. The
572 * LDT for next is loaded in switch_mm, and the GDT is loaded
573 * above.
574 *
575 * We therefore need to write new values to the segment
576 * registers on every context switch unless both the new and old
577 * values are zero.
578 *
579 * Note that we don't need to do anything for CS and SS, as
580 * those are saved and restored as part of pt_regs.
581 */
582 savesegment(es, prev->es);
583 if (unlikely(next->es | prev->es))
584 loadsegment(es, next->es);
585
586 savesegment(ds, prev->ds);
587 if (unlikely(next->ds | prev->ds))
588 loadsegment(ds, next->ds);
589
590 x86_fsgsbase_load(prev, next);
591
592 /*
593 * Switch the PDA and FPU contexts.
594 */
595 this_cpu_write(current_task, next_p);
596 this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
597
598 switch_fpu_finish(next_fpu);
599
600 /* Reload sp0. */
601 update_task_stack(next_p);
602
603 switch_to_extra(prev_p, next_p);
604
605 if (static_cpu_has_bug(X86_BUG_SYSRET_SS_ATTRS)) {
606 /*
607 * AMD CPUs have a misfeature: SYSRET sets the SS selector but
608 * does not update the cached descriptor. As a result, if we
609 * do SYSRET while SS is NULL, we'll end up in user mode with
610 * SS apparently equal to __USER_DS but actually unusable.
611 *
612 * The straightforward workaround would be to fix it up just
613 * before SYSRET, but that would slow down the system call
614 * fast paths. Instead, we ensure that SS is never NULL in
615 * system call context. We do this by replacing NULL SS
616 * selectors at every context switch. SYSCALL sets up a valid
617 * SS, so the only way to get NULL is to re-enter the kernel
618 * from CPL 3 through an interrupt. Since that can't happen
619 * in the same task as a running syscall, we are guaranteed to
620 * context switch between every interrupt vector entry and a
621 * subsequent SYSRET.
622 *
623 * We read SS first because SS reads are much faster than
624 * writes. Out of caution, we force SS to __KERNEL_DS even if
625 * it previously had a different non-NULL value.
626 */
627 unsigned short ss_sel;
628 savesegment(ss, ss_sel);
629 if (ss_sel != __KERNEL_DS)
630 loadsegment(ss, __KERNEL_DS);
631 }
632
633 /* Load the Intel cache allocation PQR MSR. */
634 resctrl_sched_in();
635
636 return prev_p;
637}
638
639void set_personality_64bit(void)
640{
641 /* inherit personality from parent */
642
643 /* Make sure to be in 64bit mode */
644 clear_thread_flag(TIF_IA32);
645 clear_thread_flag(TIF_ADDR32);
646 clear_thread_flag(TIF_X32);
647 /* Pretend that this comes from a 64bit execve */
648 task_pt_regs(current)->orig_ax = __NR_execve;
649 current_thread_info()->status &= ~TS_COMPAT;
650
651 /* Ensure the corresponding mm is not marked. */
652 if (current->mm)
653 current->mm->context.ia32_compat = 0;
654
655 /* TBD: overwrites user setup. Should have two bits.
656 But 64bit processes have always behaved this way,
657 so it's not too bad. The main problem is just that
658 32bit children are affected again. */
659 current->personality &= ~READ_IMPLIES_EXEC;
660}
661
662static void __set_personality_x32(void)
663{
664#ifdef CONFIG_X86_X32
665 clear_thread_flag(TIF_IA32);
666 set_thread_flag(TIF_X32);
667 if (current->mm)
668 current->mm->context.ia32_compat = TIF_X32;
669 current->personality &= ~READ_IMPLIES_EXEC;
670 /*
671 * in_32bit_syscall() uses the presence of the x32 syscall bit
672 * flag to determine compat status. The x86 mmap() code relies on
673 * the syscall bitness so set x32 syscall bit right here to make
674 * in_32bit_syscall() work during exec().
675 *
676 * Pretend to come from a x32 execve.
677 */
678 task_pt_regs(current)->orig_ax = __NR_x32_execve | __X32_SYSCALL_BIT;
679 current_thread_info()->status &= ~TS_COMPAT;
680#endif
681}
682
683static void __set_personality_ia32(void)
684{
685#ifdef CONFIG_IA32_EMULATION
686 set_thread_flag(TIF_IA32);
687 clear_thread_flag(TIF_X32);
688 if (current->mm)
689 current->mm->context.ia32_compat = TIF_IA32;
690 current->personality |= force_personality32;
691 /* Prepare the first "return" to user space */
692 task_pt_regs(current)->orig_ax = __NR_ia32_execve;
693 current_thread_info()->status |= TS_COMPAT;
694#endif
695}
696
697void set_personality_ia32(bool x32)
698{
699 /* Make sure to be in 32bit mode */
700 set_thread_flag(TIF_ADDR32);
701
702 if (x32)
703 __set_personality_x32();
704 else
705 __set_personality_ia32();
706}
707EXPORT_SYMBOL_GPL(set_personality_ia32);
708
709#ifdef CONFIG_CHECKPOINT_RESTORE
710static long prctl_map_vdso(const struct vdso_image *image, unsigned long addr)
711{
712 int ret;
713
714 ret = map_vdso_once(image, addr);
715 if (ret)
716 return ret;
717
718 return (long)image->size;
719}
720#endif
721
722long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2)
723{
724 int ret = 0;
725
726 switch (option) {
727 case ARCH_SET_GS: {
728 if (unlikely(arg2 >= TASK_SIZE_MAX))
729 return -EPERM;
730
731 preempt_disable();
732 /*
733 * ARCH_SET_GS has always overwritten the index
734 * and the base. Zero is the most sensible value
735 * to put in the index, and is the only value that
736 * makes any sense if FSGSBASE is unavailable.
737 */
738 if (task == current) {
739 loadseg(GS, 0);
740 x86_gsbase_write_cpu_inactive(arg2);
741
742 /*
743 * On non-FSGSBASE systems, save_base_legacy() expects
744 * that we also fill in thread.gsbase.
745 */
746 task->thread.gsbase = arg2;
747
748 } else {
749 task->thread.gsindex = 0;
750 x86_gsbase_write_task(task, arg2);
751 }
752 preempt_enable();
753 break;
754 }
755 case ARCH_SET_FS: {
756 /*
757 * Not strictly needed for %fs, but do it for symmetry
758 * with %gs
759 */
760 if (unlikely(arg2 >= TASK_SIZE_MAX))
761 return -EPERM;
762
763 preempt_disable();
764 /*
765 * Set the selector to 0 for the same reason
766 * as %gs above.
767 */
768 if (task == current) {
769 loadseg(FS, 0);
770 x86_fsbase_write_cpu(arg2);
771
772 /*
773 * On non-FSGSBASE systems, save_base_legacy() expects
774 * that we also fill in thread.fsbase.
775 */
776 task->thread.fsbase = arg2;
777 } else {
778 task->thread.fsindex = 0;
779 x86_fsbase_write_task(task, arg2);
780 }
781 preempt_enable();
782 break;
783 }
784 case ARCH_GET_FS: {
785 unsigned long base = x86_fsbase_read_task(task);
786
787 ret = put_user(base, (unsigned long __user *)arg2);
788 break;
789 }
790 case ARCH_GET_GS: {
791 unsigned long base = x86_gsbase_read_task(task);
792
793 ret = put_user(base, (unsigned long __user *)arg2);
794 break;
795 }
796
797#ifdef CONFIG_CHECKPOINT_RESTORE
798# ifdef CONFIG_X86_X32_ABI
799 case ARCH_MAP_VDSO_X32:
800 return prctl_map_vdso(&vdso_image_x32, arg2);
801# endif
802# if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
803 case ARCH_MAP_VDSO_32:
804 return prctl_map_vdso(&vdso_image_32, arg2);
805# endif
806 case ARCH_MAP_VDSO_64:
807 return prctl_map_vdso(&vdso_image_64, arg2);
808#endif
809
810 default:
811 ret = -EINVAL;
812 break;
813 }
814
815 return ret;
816}
817
818SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2)
819{
820 long ret;
821
822 ret = do_arch_prctl_64(current, option, arg2);
823 if (ret == -EINVAL)
824 ret = do_arch_prctl_common(current, option, arg2);
825
826 return ret;
827}
828
829#ifdef CONFIG_IA32_EMULATION
830COMPAT_SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2)
831{
832 return do_arch_prctl_common(current, option, arg2);
833}
834#endif
835
836unsigned long KSTK_ESP(struct task_struct *task)
837{
838 return task_pt_regs(task)->sp;
839}