Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * RocketPort device driver for Linux
4 *
5 * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
6 *
7 * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
8 */
9
10/*
11 * Kernel Synchronization:
12 *
13 * This driver has 2 kernel control paths - exception handlers (calls into the driver
14 * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts
15 * are not used.
16 *
17 * Critical data:
18 * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
19 * serial port state information and the xmit_buf circular buffer. Protected by
20 * a per port spinlock.
21 * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there
22 * is data to be transmitted. Protected by atomic bit operations.
23 * - rp_num_ports, int indicating number of open ports, protected by atomic operations.
24 *
25 * rp_write() and rp_write_char() functions use a per port semaphore to protect against
26 * simultaneous access to the same port by more than one process.
27 */
28
29/****** Defines ******/
30#define ROCKET_PARANOIA_CHECK
31#define ROCKET_DISABLE_SIMUSAGE
32
33#undef ROCKET_SOFT_FLOW
34#undef ROCKET_DEBUG_OPEN
35#undef ROCKET_DEBUG_INTR
36#undef ROCKET_DEBUG_WRITE
37#undef ROCKET_DEBUG_FLOW
38#undef ROCKET_DEBUG_THROTTLE
39#undef ROCKET_DEBUG_WAIT_UNTIL_SENT
40#undef ROCKET_DEBUG_RECEIVE
41#undef ROCKET_DEBUG_HANGUP
42#undef REV_PCI_ORDER
43#undef ROCKET_DEBUG_IO
44
45#define POLL_PERIOD (HZ/100) /* Polling period .01 seconds (10ms) */
46
47/****** Kernel includes ******/
48
49#include <linux/module.h>
50#include <linux/errno.h>
51#include <linux/major.h>
52#include <linux/kernel.h>
53#include <linux/signal.h>
54#include <linux/slab.h>
55#include <linux/mm.h>
56#include <linux/sched.h>
57#include <linux/timer.h>
58#include <linux/interrupt.h>
59#include <linux/tty.h>
60#include <linux/tty_driver.h>
61#include <linux/tty_flip.h>
62#include <linux/serial.h>
63#include <linux/string.h>
64#include <linux/fcntl.h>
65#include <linux/ptrace.h>
66#include <linux/mutex.h>
67#include <linux/ioport.h>
68#include <linux/delay.h>
69#include <linux/completion.h>
70#include <linux/wait.h>
71#include <linux/pci.h>
72#include <linux/uaccess.h>
73#include <linux/atomic.h>
74#include <asm/unaligned.h>
75#include <linux/bitops.h>
76#include <linux/spinlock.h>
77#include <linux/init.h>
78
79/****** RocketPort includes ******/
80
81#include "rocket_int.h"
82#include "rocket.h"
83
84#define ROCKET_VERSION "2.09"
85#define ROCKET_DATE "12-June-2003"
86
87/****** RocketPort Local Variables ******/
88
89static void rp_do_poll(struct timer_list *unused);
90
91static struct tty_driver *rocket_driver;
92
93static struct rocket_version driver_version = {
94 ROCKET_VERSION, ROCKET_DATE
95};
96
97static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */
98static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */
99 /* eg. Bit 0 indicates port 0 has xmit data, ... */
100static atomic_t rp_num_ports_open; /* Number of serial ports open */
101static DEFINE_TIMER(rocket_timer, rp_do_poll);
102
103static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */
104static unsigned long board2;
105static unsigned long board3;
106static unsigned long board4;
107static unsigned long controller;
108static bool support_low_speed;
109static unsigned long modem1;
110static unsigned long modem2;
111static unsigned long modem3;
112static unsigned long modem4;
113static unsigned long pc104_1[8];
114static unsigned long pc104_2[8];
115static unsigned long pc104_3[8];
116static unsigned long pc104_4[8];
117static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 };
118
119static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */
120static unsigned long rcktpt_io_addr[NUM_BOARDS];
121static int rcktpt_type[NUM_BOARDS];
122static int is_PCI[NUM_BOARDS];
123static rocketModel_t rocketModel[NUM_BOARDS];
124static int max_board;
125static const struct tty_port_operations rocket_port_ops;
126
127/*
128 * The following arrays define the interrupt bits corresponding to each AIOP.
129 * These bits are different between the ISA and regular PCI boards and the
130 * Universal PCI boards.
131 */
132
133static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
134 AIOP_INTR_BIT_0,
135 AIOP_INTR_BIT_1,
136 AIOP_INTR_BIT_2,
137 AIOP_INTR_BIT_3
138};
139
140#ifdef CONFIG_PCI
141static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
142 UPCI_AIOP_INTR_BIT_0,
143 UPCI_AIOP_INTR_BIT_1,
144 UPCI_AIOP_INTR_BIT_2,
145 UPCI_AIOP_INTR_BIT_3
146};
147#endif
148
149static Byte_t RData[RDATASIZE] = {
150 0x00, 0x09, 0xf6, 0x82,
151 0x02, 0x09, 0x86, 0xfb,
152 0x04, 0x09, 0x00, 0x0a,
153 0x06, 0x09, 0x01, 0x0a,
154 0x08, 0x09, 0x8a, 0x13,
155 0x0a, 0x09, 0xc5, 0x11,
156 0x0c, 0x09, 0x86, 0x85,
157 0x0e, 0x09, 0x20, 0x0a,
158 0x10, 0x09, 0x21, 0x0a,
159 0x12, 0x09, 0x41, 0xff,
160 0x14, 0x09, 0x82, 0x00,
161 0x16, 0x09, 0x82, 0x7b,
162 0x18, 0x09, 0x8a, 0x7d,
163 0x1a, 0x09, 0x88, 0x81,
164 0x1c, 0x09, 0x86, 0x7a,
165 0x1e, 0x09, 0x84, 0x81,
166 0x20, 0x09, 0x82, 0x7c,
167 0x22, 0x09, 0x0a, 0x0a
168};
169
170static Byte_t RRegData[RREGDATASIZE] = {
171 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */
172 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */
173 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */
174 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */
175 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */
176 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */
177 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */
178 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */
179 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */
180 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */
181 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */
182 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */
183 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */
184};
185
186static CONTROLLER_T sController[CTL_SIZE] = {
187 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
188 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
189 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
190 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
191 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
192 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
193 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
194 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}
195};
196
197static Byte_t sBitMapClrTbl[8] = {
198 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f
199};
200
201static Byte_t sBitMapSetTbl[8] = {
202 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80
203};
204
205static int sClockPrescale = 0x14;
206
207/*
208 * Line number is the ttySIx number (x), the Minor number. We
209 * assign them sequentially, starting at zero. The following
210 * array keeps track of the line number assigned to a given board/aiop/channel.
211 */
212static unsigned char lineNumbers[MAX_RP_PORTS];
213static unsigned long nextLineNumber;
214
215/***** RocketPort Static Prototypes *********/
216static int __init init_ISA(int i);
217static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
218static void rp_flush_buffer(struct tty_struct *tty);
219static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
220static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
221static void rp_start(struct tty_struct *tty);
222static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
223 int ChanNum);
224static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode);
225static void sFlushRxFIFO(CHANNEL_T * ChP);
226static void sFlushTxFIFO(CHANNEL_T * ChP);
227static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags);
228static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
229static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
230static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
231static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
232static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
233 ByteIO_t * AiopIOList, int AiopIOListSize,
234 int IRQNum, Byte_t Frequency, int PeriodicOnly);
235static int sReadAiopID(ByteIO_t io);
236static int sReadAiopNumChan(WordIO_t io);
237
238MODULE_AUTHOR("Theodore Ts'o");
239MODULE_DESCRIPTION("Comtrol RocketPort driver");
240module_param_hw(board1, ulong, ioport, 0);
241MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
242module_param_hw(board2, ulong, ioport, 0);
243MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
244module_param_hw(board3, ulong, ioport, 0);
245MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
246module_param_hw(board4, ulong, ioport, 0);
247MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
248module_param_hw(controller, ulong, ioport, 0);
249MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
250module_param(support_low_speed, bool, 0);
251MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
252module_param(modem1, ulong, 0);
253MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
254module_param(modem2, ulong, 0);
255MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
256module_param(modem3, ulong, 0);
257MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
258module_param(modem4, ulong, 0);
259MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
260module_param_array(pc104_1, ulong, NULL, 0);
261MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
262module_param_array(pc104_2, ulong, NULL, 0);
263MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
264module_param_array(pc104_3, ulong, NULL, 0);
265MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
266module_param_array(pc104_4, ulong, NULL, 0);
267MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
268
269static int __init rp_init(void);
270static void rp_cleanup_module(void);
271
272module_init(rp_init);
273module_exit(rp_cleanup_module);
274
275
276MODULE_LICENSE("Dual BSD/GPL");
277
278/*************************************************************************/
279/* Module code starts here */
280
281static inline int rocket_paranoia_check(struct r_port *info,
282 const char *routine)
283{
284#ifdef ROCKET_PARANOIA_CHECK
285 if (!info)
286 return 1;
287 if (info->magic != RPORT_MAGIC) {
288 printk(KERN_WARNING "Warning: bad magic number for rocketport "
289 "struct in %s\n", routine);
290 return 1;
291 }
292#endif
293 return 0;
294}
295
296
297/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
298 * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
299 * tty layer.
300 */
301static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
302 unsigned int ChanStatus)
303{
304 unsigned int CharNStat;
305 int ToRecv, wRecv, space;
306 unsigned char *cbuf;
307
308 ToRecv = sGetRxCnt(cp);
309#ifdef ROCKET_DEBUG_INTR
310 printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv);
311#endif
312 if (ToRecv == 0)
313 return;
314
315 /*
316 * if status indicates there are errored characters in the
317 * FIFO, then enter status mode (a word in FIFO holds
318 * character and status).
319 */
320 if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
321 if (!(ChanStatus & STATMODE)) {
322#ifdef ROCKET_DEBUG_RECEIVE
323 printk(KERN_INFO "Entering STATMODE...\n");
324#endif
325 ChanStatus |= STATMODE;
326 sEnRxStatusMode(cp);
327 }
328 }
329
330 /*
331 * if we previously entered status mode, then read down the
332 * FIFO one word at a time, pulling apart the character and
333 * the status. Update error counters depending on status
334 */
335 if (ChanStatus & STATMODE) {
336#ifdef ROCKET_DEBUG_RECEIVE
337 printk(KERN_INFO "Ignore %x, read %x...\n",
338 info->ignore_status_mask, info->read_status_mask);
339#endif
340 while (ToRecv) {
341 char flag;
342
343 CharNStat = sInW(sGetTxRxDataIO(cp));
344#ifdef ROCKET_DEBUG_RECEIVE
345 printk(KERN_INFO "%x...\n", CharNStat);
346#endif
347 if (CharNStat & STMBREAKH)
348 CharNStat &= ~(STMFRAMEH | STMPARITYH);
349 if (CharNStat & info->ignore_status_mask) {
350 ToRecv--;
351 continue;
352 }
353 CharNStat &= info->read_status_mask;
354 if (CharNStat & STMBREAKH)
355 flag = TTY_BREAK;
356 else if (CharNStat & STMPARITYH)
357 flag = TTY_PARITY;
358 else if (CharNStat & STMFRAMEH)
359 flag = TTY_FRAME;
360 else if (CharNStat & STMRCVROVRH)
361 flag = TTY_OVERRUN;
362 else
363 flag = TTY_NORMAL;
364 tty_insert_flip_char(&info->port, CharNStat & 0xff,
365 flag);
366 ToRecv--;
367 }
368
369 /*
370 * after we've emptied the FIFO in status mode, turn
371 * status mode back off
372 */
373 if (sGetRxCnt(cp) == 0) {
374#ifdef ROCKET_DEBUG_RECEIVE
375 printk(KERN_INFO "Status mode off.\n");
376#endif
377 sDisRxStatusMode(cp);
378 }
379 } else {
380 /*
381 * we aren't in status mode, so read down the FIFO two
382 * characters at time by doing repeated word IO
383 * transfer.
384 */
385 space = tty_prepare_flip_string(&info->port, &cbuf, ToRecv);
386 if (space < ToRecv) {
387#ifdef ROCKET_DEBUG_RECEIVE
388 printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space);
389#endif
390 if (space <= 0)
391 return;
392 ToRecv = space;
393 }
394 wRecv = ToRecv >> 1;
395 if (wRecv)
396 sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
397 if (ToRecv & 1)
398 cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
399 }
400 /* Push the data up to the tty layer */
401 tty_flip_buffer_push(&info->port);
402}
403
404/*
405 * Serial port transmit data function. Called from the timer polling loop as a
406 * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
407 * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
408 * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks.
409 */
410static void rp_do_transmit(struct r_port *info)
411{
412 int c;
413 CHANNEL_t *cp = &info->channel;
414 struct tty_struct *tty;
415 unsigned long flags;
416
417#ifdef ROCKET_DEBUG_INTR
418 printk(KERN_DEBUG "%s\n", __func__);
419#endif
420 if (!info)
421 return;
422 tty = tty_port_tty_get(&info->port);
423
424 if (tty == NULL) {
425 printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__);
426 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
427 return;
428 }
429
430 spin_lock_irqsave(&info->slock, flags);
431 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
432
433 /* Loop sending data to FIFO until done or FIFO full */
434 while (1) {
435 if (tty->stopped)
436 break;
437 c = min(info->xmit_fifo_room, info->xmit_cnt);
438 c = min(c, XMIT_BUF_SIZE - info->xmit_tail);
439 if (c <= 0 || info->xmit_fifo_room <= 0)
440 break;
441 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
442 if (c & 1)
443 sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]);
444 info->xmit_tail += c;
445 info->xmit_tail &= XMIT_BUF_SIZE - 1;
446 info->xmit_cnt -= c;
447 info->xmit_fifo_room -= c;
448#ifdef ROCKET_DEBUG_INTR
449 printk(KERN_INFO "tx %d chars...\n", c);
450#endif
451 }
452
453 if (info->xmit_cnt == 0)
454 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
455
456 if (info->xmit_cnt < WAKEUP_CHARS) {
457 tty_wakeup(tty);
458#ifdef ROCKETPORT_HAVE_POLL_WAIT
459 wake_up_interruptible(&tty->poll_wait);
460#endif
461 }
462
463 spin_unlock_irqrestore(&info->slock, flags);
464 tty_kref_put(tty);
465
466#ifdef ROCKET_DEBUG_INTR
467 printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head,
468 info->xmit_tail, info->xmit_fifo_room);
469#endif
470}
471
472/*
473 * Called when a serial port signals it has read data in it's RX FIFO.
474 * It checks what interrupts are pending and services them, including
475 * receiving serial data.
476 */
477static void rp_handle_port(struct r_port *info)
478{
479 CHANNEL_t *cp;
480 unsigned int IntMask, ChanStatus;
481
482 if (!info)
483 return;
484
485 if (!tty_port_initialized(&info->port)) {
486 printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
487 "info->flags & NOT_INIT\n");
488 return;
489 }
490
491 cp = &info->channel;
492
493 IntMask = sGetChanIntID(cp) & info->intmask;
494#ifdef ROCKET_DEBUG_INTR
495 printk(KERN_INFO "rp_interrupt %02x...\n", IntMask);
496#endif
497 ChanStatus = sGetChanStatus(cp);
498 if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */
499 rp_do_receive(info, cp, ChanStatus);
500 }
501 if (IntMask & DELTA_CD) { /* CD change */
502#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
503 printk(KERN_INFO "ttyR%d CD now %s...\n", info->line,
504 (ChanStatus & CD_ACT) ? "on" : "off");
505#endif
506 if (!(ChanStatus & CD_ACT) && info->cd_status) {
507#ifdef ROCKET_DEBUG_HANGUP
508 printk(KERN_INFO "CD drop, calling hangup.\n");
509#endif
510 tty_port_tty_hangup(&info->port, false);
511 }
512 info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
513 wake_up_interruptible(&info->port.open_wait);
514 }
515#ifdef ROCKET_DEBUG_INTR
516 if (IntMask & DELTA_CTS) { /* CTS change */
517 printk(KERN_INFO "CTS change...\n");
518 }
519 if (IntMask & DELTA_DSR) { /* DSR change */
520 printk(KERN_INFO "DSR change...\n");
521 }
522#endif
523}
524
525/*
526 * The top level polling routine. Repeats every 1/100 HZ (10ms).
527 */
528static void rp_do_poll(struct timer_list *unused)
529{
530 CONTROLLER_t *ctlp;
531 int ctrl, aiop, ch, line;
532 unsigned int xmitmask, i;
533 unsigned int CtlMask;
534 unsigned char AiopMask;
535 Word_t bit;
536
537 /* Walk through all the boards (ctrl's) */
538 for (ctrl = 0; ctrl < max_board; ctrl++) {
539 if (rcktpt_io_addr[ctrl] <= 0)
540 continue;
541
542 /* Get a ptr to the board's control struct */
543 ctlp = sCtlNumToCtlPtr(ctrl);
544
545 /* Get the interrupt status from the board */
546#ifdef CONFIG_PCI
547 if (ctlp->BusType == isPCI)
548 CtlMask = sPCIGetControllerIntStatus(ctlp);
549 else
550#endif
551 CtlMask = sGetControllerIntStatus(ctlp);
552
553 /* Check if any AIOP read bits are set */
554 for (aiop = 0; CtlMask; aiop++) {
555 bit = ctlp->AiopIntrBits[aiop];
556 if (CtlMask & bit) {
557 CtlMask &= ~bit;
558 AiopMask = sGetAiopIntStatus(ctlp, aiop);
559
560 /* Check if any port read bits are set */
561 for (ch = 0; AiopMask; AiopMask >>= 1, ch++) {
562 if (AiopMask & 1) {
563
564 /* Get the line number (/dev/ttyRx number). */
565 /* Read the data from the port. */
566 line = GetLineNumber(ctrl, aiop, ch);
567 rp_handle_port(rp_table[line]);
568 }
569 }
570 }
571 }
572
573 xmitmask = xmit_flags[ctrl];
574
575 /*
576 * xmit_flags contains bit-significant flags, indicating there is data
577 * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
578 * 1, ... (32 total possible). The variable i has the aiop and ch
579 * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
580 */
581 if (xmitmask) {
582 for (i = 0; i < rocketModel[ctrl].numPorts; i++) {
583 if (xmitmask & (1 << i)) {
584 aiop = (i & 0x18) >> 3;
585 ch = i & 0x07;
586 line = GetLineNumber(ctrl, aiop, ch);
587 rp_do_transmit(rp_table[line]);
588 }
589 }
590 }
591 }
592
593 /*
594 * Reset the timer so we get called at the next clock tick (10ms).
595 */
596 if (atomic_read(&rp_num_ports_open))
597 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
598}
599
600/*
601 * Initializes the r_port structure for a port, as well as enabling the port on
602 * the board.
603 * Inputs: board, aiop, chan numbers
604 */
605static void __init
606init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
607{
608 unsigned rocketMode;
609 struct r_port *info;
610 int line;
611 CONTROLLER_T *ctlp;
612
613 /* Get the next available line number */
614 line = SetLineNumber(board, aiop, chan);
615
616 ctlp = sCtlNumToCtlPtr(board);
617
618 /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */
619 info = kzalloc(sizeof (struct r_port), GFP_KERNEL);
620 if (!info) {
621 printk(KERN_ERR "Couldn't allocate info struct for line #%d\n",
622 line);
623 return;
624 }
625
626 info->magic = RPORT_MAGIC;
627 info->line = line;
628 info->ctlp = ctlp;
629 info->board = board;
630 info->aiop = aiop;
631 info->chan = chan;
632 tty_port_init(&info->port);
633 info->port.ops = &rocket_port_ops;
634 info->flags &= ~ROCKET_MODE_MASK;
635 if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1))
636 switch (pc104[board][line]) {
637 case 422:
638 info->flags |= ROCKET_MODE_RS422;
639 break;
640 case 485:
641 info->flags |= ROCKET_MODE_RS485;
642 break;
643 case 232:
644 default:
645 info->flags |= ROCKET_MODE_RS232;
646 break;
647 }
648 else
649 info->flags |= ROCKET_MODE_RS232;
650
651 info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
652 if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
653 printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n",
654 board, aiop, chan);
655 tty_port_destroy(&info->port);
656 kfree(info);
657 return;
658 }
659
660 rocketMode = info->flags & ROCKET_MODE_MASK;
661
662 if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485))
663 sEnRTSToggle(&info->channel);
664 else
665 sDisRTSToggle(&info->channel);
666
667 if (ctlp->boardType == ROCKET_TYPE_PC104) {
668 switch (rocketMode) {
669 case ROCKET_MODE_RS485:
670 sSetInterfaceMode(&info->channel, InterfaceModeRS485);
671 break;
672 case ROCKET_MODE_RS422:
673 sSetInterfaceMode(&info->channel, InterfaceModeRS422);
674 break;
675 case ROCKET_MODE_RS232:
676 default:
677 if (info->flags & ROCKET_RTS_TOGGLE)
678 sSetInterfaceMode(&info->channel, InterfaceModeRS232T);
679 else
680 sSetInterfaceMode(&info->channel, InterfaceModeRS232);
681 break;
682 }
683 }
684 spin_lock_init(&info->slock);
685 mutex_init(&info->write_mtx);
686 rp_table[line] = info;
687 tty_port_register_device(&info->port, rocket_driver, line,
688 pci_dev ? &pci_dev->dev : NULL);
689}
690
691/*
692 * Configures a rocketport port according to its termio settings. Called from
693 * user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
694 */
695static void configure_r_port(struct tty_struct *tty, struct r_port *info,
696 struct ktermios *old_termios)
697{
698 unsigned cflag;
699 unsigned long flags;
700 unsigned rocketMode;
701 int bits, baud, divisor;
702 CHANNEL_t *cp;
703 struct ktermios *t = &tty->termios;
704
705 cp = &info->channel;
706 cflag = t->c_cflag;
707
708 /* Byte size and parity */
709 if ((cflag & CSIZE) == CS8) {
710 sSetData8(cp);
711 bits = 10;
712 } else {
713 sSetData7(cp);
714 bits = 9;
715 }
716 if (cflag & CSTOPB) {
717 sSetStop2(cp);
718 bits++;
719 } else {
720 sSetStop1(cp);
721 }
722
723 if (cflag & PARENB) {
724 sEnParity(cp);
725 bits++;
726 if (cflag & PARODD) {
727 sSetOddParity(cp);
728 } else {
729 sSetEvenParity(cp);
730 }
731 } else {
732 sDisParity(cp);
733 }
734
735 /* baud rate */
736 baud = tty_get_baud_rate(tty);
737 if (!baud)
738 baud = 9600;
739 divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
740 if ((divisor >= 8192 || divisor < 0) && old_termios) {
741 baud = tty_termios_baud_rate(old_termios);
742 if (!baud)
743 baud = 9600;
744 divisor = (rp_baud_base[info->board] / baud) - 1;
745 }
746 if (divisor >= 8192 || divisor < 0) {
747 baud = 9600;
748 divisor = (rp_baud_base[info->board] / baud) - 1;
749 }
750 info->cps = baud / bits;
751 sSetBaud(cp, divisor);
752
753 /* FIXME: Should really back compute a baud rate from the divisor */
754 tty_encode_baud_rate(tty, baud, baud);
755
756 if (cflag & CRTSCTS) {
757 info->intmask |= DELTA_CTS;
758 sEnCTSFlowCtl(cp);
759 } else {
760 info->intmask &= ~DELTA_CTS;
761 sDisCTSFlowCtl(cp);
762 }
763 if (cflag & CLOCAL) {
764 info->intmask &= ~DELTA_CD;
765 } else {
766 spin_lock_irqsave(&info->slock, flags);
767 if (sGetChanStatus(cp) & CD_ACT)
768 info->cd_status = 1;
769 else
770 info->cd_status = 0;
771 info->intmask |= DELTA_CD;
772 spin_unlock_irqrestore(&info->slock, flags);
773 }
774
775 /*
776 * Handle software flow control in the board
777 */
778#ifdef ROCKET_SOFT_FLOW
779 if (I_IXON(tty)) {
780 sEnTxSoftFlowCtl(cp);
781 if (I_IXANY(tty)) {
782 sEnIXANY(cp);
783 } else {
784 sDisIXANY(cp);
785 }
786 sSetTxXONChar(cp, START_CHAR(tty));
787 sSetTxXOFFChar(cp, STOP_CHAR(tty));
788 } else {
789 sDisTxSoftFlowCtl(cp);
790 sDisIXANY(cp);
791 sClrTxXOFF(cp);
792 }
793#endif
794
795 /*
796 * Set up ignore/read mask words
797 */
798 info->read_status_mask = STMRCVROVRH | 0xFF;
799 if (I_INPCK(tty))
800 info->read_status_mask |= STMFRAMEH | STMPARITYH;
801 if (I_BRKINT(tty) || I_PARMRK(tty))
802 info->read_status_mask |= STMBREAKH;
803
804 /*
805 * Characters to ignore
806 */
807 info->ignore_status_mask = 0;
808 if (I_IGNPAR(tty))
809 info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
810 if (I_IGNBRK(tty)) {
811 info->ignore_status_mask |= STMBREAKH;
812 /*
813 * If we're ignoring parity and break indicators,
814 * ignore overruns too. (For real raw support).
815 */
816 if (I_IGNPAR(tty))
817 info->ignore_status_mask |= STMRCVROVRH;
818 }
819
820 rocketMode = info->flags & ROCKET_MODE_MASK;
821
822 if ((info->flags & ROCKET_RTS_TOGGLE)
823 || (rocketMode == ROCKET_MODE_RS485))
824 sEnRTSToggle(cp);
825 else
826 sDisRTSToggle(cp);
827
828 sSetRTS(&info->channel);
829
830 if (cp->CtlP->boardType == ROCKET_TYPE_PC104) {
831 switch (rocketMode) {
832 case ROCKET_MODE_RS485:
833 sSetInterfaceMode(cp, InterfaceModeRS485);
834 break;
835 case ROCKET_MODE_RS422:
836 sSetInterfaceMode(cp, InterfaceModeRS422);
837 break;
838 case ROCKET_MODE_RS232:
839 default:
840 if (info->flags & ROCKET_RTS_TOGGLE)
841 sSetInterfaceMode(cp, InterfaceModeRS232T);
842 else
843 sSetInterfaceMode(cp, InterfaceModeRS232);
844 break;
845 }
846 }
847}
848
849static int carrier_raised(struct tty_port *port)
850{
851 struct r_port *info = container_of(port, struct r_port, port);
852 return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
853}
854
855static void dtr_rts(struct tty_port *port, int on)
856{
857 struct r_port *info = container_of(port, struct r_port, port);
858 if (on) {
859 sSetDTR(&info->channel);
860 sSetRTS(&info->channel);
861 } else {
862 sClrDTR(&info->channel);
863 sClrRTS(&info->channel);
864 }
865}
866
867/*
868 * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
869 * port's r_port struct. Initializes the port hardware.
870 */
871static int rp_open(struct tty_struct *tty, struct file *filp)
872{
873 struct r_port *info;
874 struct tty_port *port;
875 int retval;
876 CHANNEL_t *cp;
877 unsigned long page;
878
879 info = rp_table[tty->index];
880 if (info == NULL)
881 return -ENXIO;
882 port = &info->port;
883
884 page = __get_free_page(GFP_KERNEL);
885 if (!page)
886 return -ENOMEM;
887
888 /*
889 * We must not sleep from here until the port is marked fully in use.
890 */
891 if (info->xmit_buf)
892 free_page(page);
893 else
894 info->xmit_buf = (unsigned char *) page;
895
896 tty->driver_data = info;
897 tty_port_tty_set(port, tty);
898
899 if (port->count++ == 0) {
900 atomic_inc(&rp_num_ports_open);
901
902#ifdef ROCKET_DEBUG_OPEN
903 printk(KERN_INFO "rocket mod++ = %d...\n",
904 atomic_read(&rp_num_ports_open));
905#endif
906 }
907#ifdef ROCKET_DEBUG_OPEN
908 printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count);
909#endif
910
911 /*
912 * Info->count is now 1; so it's safe to sleep now.
913 */
914 if (!tty_port_initialized(port)) {
915 cp = &info->channel;
916 sSetRxTrigger(cp, TRIG_1);
917 if (sGetChanStatus(cp) & CD_ACT)
918 info->cd_status = 1;
919 else
920 info->cd_status = 0;
921 sDisRxStatusMode(cp);
922 sFlushRxFIFO(cp);
923 sFlushTxFIFO(cp);
924
925 sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
926 sSetRxTrigger(cp, TRIG_1);
927
928 sGetChanStatus(cp);
929 sDisRxStatusMode(cp);
930 sClrTxXOFF(cp);
931
932 sDisCTSFlowCtl(cp);
933 sDisTxSoftFlowCtl(cp);
934
935 sEnRxFIFO(cp);
936 sEnTransmit(cp);
937
938 tty_port_set_initialized(&info->port, 1);
939
940 configure_r_port(tty, info, NULL);
941 if (C_BAUD(tty)) {
942 sSetDTR(cp);
943 sSetRTS(cp);
944 }
945 }
946 /* Starts (or resets) the maint polling loop */
947 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
948
949 retval = tty_port_block_til_ready(port, tty, filp);
950 if (retval) {
951#ifdef ROCKET_DEBUG_OPEN
952 printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval);
953#endif
954 return retval;
955 }
956 return 0;
957}
958
959/*
960 * Exception handler that closes a serial port. info->port.count is considered critical.
961 */
962static void rp_close(struct tty_struct *tty, struct file *filp)
963{
964 struct r_port *info = tty->driver_data;
965 struct tty_port *port = &info->port;
966 int timeout;
967 CHANNEL_t *cp;
968
969 if (rocket_paranoia_check(info, "rp_close"))
970 return;
971
972#ifdef ROCKET_DEBUG_OPEN
973 printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count);
974#endif
975
976 if (tty_port_close_start(port, tty, filp) == 0)
977 return;
978
979 mutex_lock(&port->mutex);
980 cp = &info->channel;
981 /*
982 * Before we drop DTR, make sure the UART transmitter
983 * has completely drained; this is especially
984 * important if there is a transmit FIFO!
985 */
986 timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps;
987 if (timeout == 0)
988 timeout = 1;
989 rp_wait_until_sent(tty, timeout);
990 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
991
992 sDisTransmit(cp);
993 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
994 sDisCTSFlowCtl(cp);
995 sDisTxSoftFlowCtl(cp);
996 sClrTxXOFF(cp);
997 sFlushRxFIFO(cp);
998 sFlushTxFIFO(cp);
999 sClrRTS(cp);
1000 if (C_HUPCL(tty))
1001 sClrDTR(cp);
1002
1003 rp_flush_buffer(tty);
1004
1005 tty_ldisc_flush(tty);
1006
1007 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1008
1009 /* We can't yet use tty_port_close_end as the buffer handling in this
1010 driver is a bit different to the usual */
1011
1012 if (port->blocked_open) {
1013 if (port->close_delay) {
1014 msleep_interruptible(jiffies_to_msecs(port->close_delay));
1015 }
1016 wake_up_interruptible(&port->open_wait);
1017 } else {
1018 if (info->xmit_buf) {
1019 free_page((unsigned long) info->xmit_buf);
1020 info->xmit_buf = NULL;
1021 }
1022 }
1023 spin_lock_irq(&port->lock);
1024 tty->closing = 0;
1025 spin_unlock_irq(&port->lock);
1026 tty_port_set_initialized(port, 0);
1027 tty_port_set_active(port, 0);
1028 mutex_unlock(&port->mutex);
1029 tty_port_tty_set(port, NULL);
1030
1031 atomic_dec(&rp_num_ports_open);
1032
1033#ifdef ROCKET_DEBUG_OPEN
1034 printk(KERN_INFO "rocket mod-- = %d...\n",
1035 atomic_read(&rp_num_ports_open));
1036 printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line);
1037#endif
1038
1039}
1040
1041static void rp_set_termios(struct tty_struct *tty,
1042 struct ktermios *old_termios)
1043{
1044 struct r_port *info = tty->driver_data;
1045 CHANNEL_t *cp;
1046 unsigned cflag;
1047
1048 if (rocket_paranoia_check(info, "rp_set_termios"))
1049 return;
1050
1051 cflag = tty->termios.c_cflag;
1052
1053 /*
1054 * This driver doesn't support CS5 or CS6
1055 */
1056 if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
1057 tty->termios.c_cflag =
1058 ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
1059 /* Or CMSPAR */
1060 tty->termios.c_cflag &= ~CMSPAR;
1061
1062 configure_r_port(tty, info, old_termios);
1063
1064 cp = &info->channel;
1065
1066 /* Handle transition to B0 status */
1067 if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
1068 sClrDTR(cp);
1069 sClrRTS(cp);
1070 }
1071
1072 /* Handle transition away from B0 status */
1073 if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
1074 sSetRTS(cp);
1075 sSetDTR(cp);
1076 }
1077
1078 if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty))
1079 rp_start(tty);
1080}
1081
1082static int rp_break(struct tty_struct *tty, int break_state)
1083{
1084 struct r_port *info = tty->driver_data;
1085 unsigned long flags;
1086
1087 if (rocket_paranoia_check(info, "rp_break"))
1088 return -EINVAL;
1089
1090 spin_lock_irqsave(&info->slock, flags);
1091 if (break_state == -1)
1092 sSendBreak(&info->channel);
1093 else
1094 sClrBreak(&info->channel);
1095 spin_unlock_irqrestore(&info->slock, flags);
1096 return 0;
1097}
1098
1099/*
1100 * sGetChanRI used to be a macro in rocket_int.h. When the functionality for
1101 * the UPCI boards was added, it was decided to make this a function because
1102 * the macro was getting too complicated. All cases except the first one
1103 * (UPCIRingInd) are taken directly from the original macro.
1104 */
1105static int sGetChanRI(CHANNEL_T * ChP)
1106{
1107 CONTROLLER_t *CtlP = ChP->CtlP;
1108 int ChanNum = ChP->ChanNum;
1109 int RingInd = 0;
1110
1111 if (CtlP->UPCIRingInd)
1112 RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]);
1113 else if (CtlP->AltChanRingIndicator)
1114 RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT;
1115 else if (CtlP->boardType == ROCKET_TYPE_PC104)
1116 RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]);
1117
1118 return RingInd;
1119}
1120
1121/********************************************************************************************/
1122/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */
1123
1124/*
1125 * Returns the state of the serial modem control lines. These next 2 functions
1126 * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
1127 */
1128static int rp_tiocmget(struct tty_struct *tty)
1129{
1130 struct r_port *info = tty->driver_data;
1131 unsigned int control, result, ChanStatus;
1132
1133 ChanStatus = sGetChanStatusLo(&info->channel);
1134 control = info->channel.TxControl[3];
1135 result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
1136 ((control & SET_DTR) ? TIOCM_DTR : 0) |
1137 ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
1138 (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
1139 ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) |
1140 ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0);
1141
1142 return result;
1143}
1144
1145/*
1146 * Sets the modem control lines
1147 */
1148static int rp_tiocmset(struct tty_struct *tty,
1149 unsigned int set, unsigned int clear)
1150{
1151 struct r_port *info = tty->driver_data;
1152
1153 if (set & TIOCM_RTS)
1154 info->channel.TxControl[3] |= SET_RTS;
1155 if (set & TIOCM_DTR)
1156 info->channel.TxControl[3] |= SET_DTR;
1157 if (clear & TIOCM_RTS)
1158 info->channel.TxControl[3] &= ~SET_RTS;
1159 if (clear & TIOCM_DTR)
1160 info->channel.TxControl[3] &= ~SET_DTR;
1161
1162 out32(info->channel.IndexAddr, info->channel.TxControl);
1163 return 0;
1164}
1165
1166static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
1167{
1168 struct rocket_config tmp;
1169
1170 memset(&tmp, 0, sizeof (tmp));
1171 mutex_lock(&info->port.mutex);
1172 tmp.line = info->line;
1173 tmp.flags = info->flags;
1174 tmp.close_delay = info->port.close_delay;
1175 tmp.closing_wait = info->port.closing_wait;
1176 tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
1177 mutex_unlock(&info->port.mutex);
1178
1179 if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
1180 return -EFAULT;
1181 return 0;
1182}
1183
1184static int set_config(struct tty_struct *tty, struct r_port *info,
1185 struct rocket_config __user *new_info)
1186{
1187 struct rocket_config new_serial;
1188
1189 if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
1190 return -EFAULT;
1191
1192 mutex_lock(&info->port.mutex);
1193 if (!capable(CAP_SYS_ADMIN))
1194 {
1195 if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
1196 mutex_unlock(&info->port.mutex);
1197 return -EPERM;
1198 }
1199 info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
1200 mutex_unlock(&info->port.mutex);
1201 return 0;
1202 }
1203
1204 if ((new_serial.flags ^ info->flags) & ROCKET_SPD_MASK) {
1205 /* warn about deprecation, unless clearing */
1206 if (new_serial.flags & ROCKET_SPD_MASK)
1207 dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n");
1208 }
1209
1210 info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
1211 info->port.close_delay = new_serial.close_delay;
1212 info->port.closing_wait = new_serial.closing_wait;
1213
1214 mutex_unlock(&info->port.mutex);
1215
1216 configure_r_port(tty, info, NULL);
1217 return 0;
1218}
1219
1220/*
1221 * This function fills in a rocket_ports struct with information
1222 * about what boards/ports are in the system. This info is passed
1223 * to user space. See setrocket.c where the info is used to create
1224 * the /dev/ttyRx ports.
1225 */
1226static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
1227{
1228 struct rocket_ports *tmp;
1229 int board, ret = 0;
1230
1231 tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
1232 if (!tmp)
1233 return -ENOMEM;
1234
1235 tmp->tty_major = rocket_driver->major;
1236
1237 for (board = 0; board < 4; board++) {
1238 tmp->rocketModel[board].model = rocketModel[board].model;
1239 strcpy(tmp->rocketModel[board].modelString,
1240 rocketModel[board].modelString);
1241 tmp->rocketModel[board].numPorts = rocketModel[board].numPorts;
1242 tmp->rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
1243 tmp->rocketModel[board].startingPortNumber =
1244 rocketModel[board].startingPortNumber;
1245 }
1246 if (copy_to_user(retports, tmp, sizeof(*retports)))
1247 ret = -EFAULT;
1248 kfree(tmp);
1249 return ret;
1250}
1251
1252static int reset_rm2(struct r_port *info, void __user *arg)
1253{
1254 int reset;
1255
1256 if (!capable(CAP_SYS_ADMIN))
1257 return -EPERM;
1258
1259 if (copy_from_user(&reset, arg, sizeof (int)))
1260 return -EFAULT;
1261 if (reset)
1262 reset = 1;
1263
1264 if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII &&
1265 rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII)
1266 return -EINVAL;
1267
1268 if (info->ctlp->BusType == isISA)
1269 sModemReset(info->ctlp, info->chan, reset);
1270 else
1271 sPCIModemReset(info->ctlp, info->chan, reset);
1272
1273 return 0;
1274}
1275
1276static int get_version(struct r_port *info, struct rocket_version __user *retvers)
1277{
1278 if (copy_to_user(retvers, &driver_version, sizeof (*retvers)))
1279 return -EFAULT;
1280 return 0;
1281}
1282
1283/* IOCTL call handler into the driver */
1284static int rp_ioctl(struct tty_struct *tty,
1285 unsigned int cmd, unsigned long arg)
1286{
1287 struct r_port *info = tty->driver_data;
1288 void __user *argp = (void __user *)arg;
1289 int ret = 0;
1290
1291 if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
1292 return -ENXIO;
1293
1294 switch (cmd) {
1295 case RCKP_GET_CONFIG:
1296 dev_warn_ratelimited(tty->dev,
1297 "RCKP_GET_CONFIG option is deprecated\n");
1298 ret = get_config(info, argp);
1299 break;
1300 case RCKP_SET_CONFIG:
1301 dev_warn_ratelimited(tty->dev,
1302 "RCKP_SET_CONFIG option is deprecated\n");
1303 ret = set_config(tty, info, argp);
1304 break;
1305 case RCKP_GET_PORTS:
1306 dev_warn_ratelimited(tty->dev,
1307 "RCKP_GET_PORTS option is deprecated\n");
1308 ret = get_ports(info, argp);
1309 break;
1310 case RCKP_RESET_RM2:
1311 dev_warn_ratelimited(tty->dev,
1312 "RCKP_RESET_RM2 option is deprecated\n");
1313 ret = reset_rm2(info, argp);
1314 break;
1315 case RCKP_GET_VERSION:
1316 dev_warn_ratelimited(tty->dev,
1317 "RCKP_GET_VERSION option is deprecated\n");
1318 ret = get_version(info, argp);
1319 break;
1320 default:
1321 ret = -ENOIOCTLCMD;
1322 }
1323 return ret;
1324}
1325
1326static void rp_send_xchar(struct tty_struct *tty, char ch)
1327{
1328 struct r_port *info = tty->driver_data;
1329 CHANNEL_t *cp;
1330
1331 if (rocket_paranoia_check(info, "rp_send_xchar"))
1332 return;
1333
1334 cp = &info->channel;
1335 if (sGetTxCnt(cp))
1336 sWriteTxPrioByte(cp, ch);
1337 else
1338 sWriteTxByte(sGetTxRxDataIO(cp), ch);
1339}
1340
1341static void rp_throttle(struct tty_struct *tty)
1342{
1343 struct r_port *info = tty->driver_data;
1344
1345#ifdef ROCKET_DEBUG_THROTTLE
1346 printk(KERN_INFO "throttle %s ....\n", tty->name);
1347#endif
1348
1349 if (rocket_paranoia_check(info, "rp_throttle"))
1350 return;
1351
1352 if (I_IXOFF(tty))
1353 rp_send_xchar(tty, STOP_CHAR(tty));
1354
1355 sClrRTS(&info->channel);
1356}
1357
1358static void rp_unthrottle(struct tty_struct *tty)
1359{
1360 struct r_port *info = tty->driver_data;
1361#ifdef ROCKET_DEBUG_THROTTLE
1362 printk(KERN_INFO "unthrottle %s ....\n", tty->name);
1363#endif
1364
1365 if (rocket_paranoia_check(info, "rp_unthrottle"))
1366 return;
1367
1368 if (I_IXOFF(tty))
1369 rp_send_xchar(tty, START_CHAR(tty));
1370
1371 sSetRTS(&info->channel);
1372}
1373
1374/*
1375 * ------------------------------------------------------------
1376 * rp_stop() and rp_start()
1377 *
1378 * This routines are called before setting or resetting tty->stopped.
1379 * They enable or disable transmitter interrupts, as necessary.
1380 * ------------------------------------------------------------
1381 */
1382static void rp_stop(struct tty_struct *tty)
1383{
1384 struct r_port *info = tty->driver_data;
1385
1386#ifdef ROCKET_DEBUG_FLOW
1387 printk(KERN_INFO "stop %s: %d %d....\n", tty->name,
1388 info->xmit_cnt, info->xmit_fifo_room);
1389#endif
1390
1391 if (rocket_paranoia_check(info, "rp_stop"))
1392 return;
1393
1394 if (sGetTxCnt(&info->channel))
1395 sDisTransmit(&info->channel);
1396}
1397
1398static void rp_start(struct tty_struct *tty)
1399{
1400 struct r_port *info = tty->driver_data;
1401
1402#ifdef ROCKET_DEBUG_FLOW
1403 printk(KERN_INFO "start %s: %d %d....\n", tty->name,
1404 info->xmit_cnt, info->xmit_fifo_room);
1405#endif
1406
1407 if (rocket_paranoia_check(info, "rp_stop"))
1408 return;
1409
1410 sEnTransmit(&info->channel);
1411 set_bit((info->aiop * 8) + info->chan,
1412 (void *) &xmit_flags[info->board]);
1413}
1414
1415/*
1416 * rp_wait_until_sent() --- wait until the transmitter is empty
1417 */
1418static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
1419{
1420 struct r_port *info = tty->driver_data;
1421 CHANNEL_t *cp;
1422 unsigned long orig_jiffies;
1423 int check_time, exit_time;
1424 int txcnt;
1425
1426 if (rocket_paranoia_check(info, "rp_wait_until_sent"))
1427 return;
1428
1429 cp = &info->channel;
1430
1431 orig_jiffies = jiffies;
1432#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1433 printk(KERN_INFO "In %s(%d) (jiff=%lu)...\n", __func__, timeout,
1434 jiffies);
1435 printk(KERN_INFO "cps=%d...\n", info->cps);
1436#endif
1437 while (1) {
1438 txcnt = sGetTxCnt(cp);
1439 if (!txcnt) {
1440 if (sGetChanStatusLo(cp) & TXSHRMT)
1441 break;
1442 check_time = (HZ / info->cps) / 5;
1443 } else {
1444 check_time = HZ * txcnt / info->cps;
1445 }
1446 if (timeout) {
1447 exit_time = orig_jiffies + timeout - jiffies;
1448 if (exit_time <= 0)
1449 break;
1450 if (exit_time < check_time)
1451 check_time = exit_time;
1452 }
1453 if (check_time == 0)
1454 check_time = 1;
1455#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1456 printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt,
1457 jiffies, check_time);
1458#endif
1459 msleep_interruptible(jiffies_to_msecs(check_time));
1460 if (signal_pending(current))
1461 break;
1462 }
1463 __set_current_state(TASK_RUNNING);
1464#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1465 printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
1466#endif
1467}
1468
1469/*
1470 * rp_hangup() --- called by tty_hangup() when a hangup is signaled.
1471 */
1472static void rp_hangup(struct tty_struct *tty)
1473{
1474 CHANNEL_t *cp;
1475 struct r_port *info = tty->driver_data;
1476 unsigned long flags;
1477
1478 if (rocket_paranoia_check(info, "rp_hangup"))
1479 return;
1480
1481#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP))
1482 printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
1483#endif
1484 rp_flush_buffer(tty);
1485 spin_lock_irqsave(&info->port.lock, flags);
1486 if (info->port.count)
1487 atomic_dec(&rp_num_ports_open);
1488 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1489 spin_unlock_irqrestore(&info->port.lock, flags);
1490
1491 tty_port_hangup(&info->port);
1492
1493 cp = &info->channel;
1494 sDisRxFIFO(cp);
1495 sDisTransmit(cp);
1496 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1497 sDisCTSFlowCtl(cp);
1498 sDisTxSoftFlowCtl(cp);
1499 sClrTxXOFF(cp);
1500 tty_port_set_initialized(&info->port, 0);
1501
1502 wake_up_interruptible(&info->port.open_wait);
1503}
1504
1505/*
1506 * Exception handler - write char routine. The RocketPort driver uses a
1507 * double-buffering strategy, with the twist that if the in-memory CPU
1508 * buffer is empty, and there's space in the transmit FIFO, the
1509 * writing routines will write directly to transmit FIFO.
1510 * Write buffer and counters protected by spinlocks
1511 */
1512static int rp_put_char(struct tty_struct *tty, unsigned char ch)
1513{
1514 struct r_port *info = tty->driver_data;
1515 CHANNEL_t *cp;
1516 unsigned long flags;
1517
1518 if (rocket_paranoia_check(info, "rp_put_char"))
1519 return 0;
1520
1521 /*
1522 * Grab the port write mutex, locking out other processes that try to
1523 * write to this port
1524 */
1525 mutex_lock(&info->write_mtx);
1526
1527#ifdef ROCKET_DEBUG_WRITE
1528 printk(KERN_INFO "rp_put_char %c...\n", ch);
1529#endif
1530
1531 spin_lock_irqsave(&info->slock, flags);
1532 cp = &info->channel;
1533
1534 if (!tty->stopped && info->xmit_fifo_room == 0)
1535 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1536
1537 if (tty->stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
1538 info->xmit_buf[info->xmit_head++] = ch;
1539 info->xmit_head &= XMIT_BUF_SIZE - 1;
1540 info->xmit_cnt++;
1541 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1542 } else {
1543 sOutB(sGetTxRxDataIO(cp), ch);
1544 info->xmit_fifo_room--;
1545 }
1546 spin_unlock_irqrestore(&info->slock, flags);
1547 mutex_unlock(&info->write_mtx);
1548 return 1;
1549}
1550
1551/*
1552 * Exception handler - write routine, called when user app writes to the device.
1553 * A per port write mutex is used to protect from another process writing to
1554 * this port at the same time. This other process could be running on the other CPU
1555 * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
1556 * Spinlocks protect the info xmit members.
1557 */
1558static int rp_write(struct tty_struct *tty,
1559 const unsigned char *buf, int count)
1560{
1561 struct r_port *info = tty->driver_data;
1562 CHANNEL_t *cp;
1563 const unsigned char *b;
1564 int c, retval = 0;
1565 unsigned long flags;
1566
1567 if (count <= 0 || rocket_paranoia_check(info, "rp_write"))
1568 return 0;
1569
1570 if (mutex_lock_interruptible(&info->write_mtx))
1571 return -ERESTARTSYS;
1572
1573#ifdef ROCKET_DEBUG_WRITE
1574 printk(KERN_INFO "rp_write %d chars...\n", count);
1575#endif
1576 cp = &info->channel;
1577
1578 if (!tty->stopped && info->xmit_fifo_room < count)
1579 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1580
1581 /*
1582 * If the write queue for the port is empty, and there is FIFO space, stuff bytes
1583 * into FIFO. Use the write queue for temp storage.
1584 */
1585 if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
1586 c = min(count, info->xmit_fifo_room);
1587 b = buf;
1588
1589 /* Push data into FIFO, 2 bytes at a time */
1590 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
1591
1592 /* If there is a byte remaining, write it */
1593 if (c & 1)
1594 sOutB(sGetTxRxDataIO(cp), b[c - 1]);
1595
1596 retval += c;
1597 buf += c;
1598 count -= c;
1599
1600 spin_lock_irqsave(&info->slock, flags);
1601 info->xmit_fifo_room -= c;
1602 spin_unlock_irqrestore(&info->slock, flags);
1603 }
1604
1605 /* If count is zero, we wrote it all and are done */
1606 if (!count)
1607 goto end;
1608
1609 /* Write remaining data into the port's xmit_buf */
1610 while (1) {
1611 /* Hung up ? */
1612 if (!tty_port_active(&info->port))
1613 goto end;
1614 c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
1615 c = min(c, XMIT_BUF_SIZE - info->xmit_head);
1616 if (c <= 0)
1617 break;
1618
1619 b = buf;
1620 memcpy(info->xmit_buf + info->xmit_head, b, c);
1621
1622 spin_lock_irqsave(&info->slock, flags);
1623 info->xmit_head =
1624 (info->xmit_head + c) & (XMIT_BUF_SIZE - 1);
1625 info->xmit_cnt += c;
1626 spin_unlock_irqrestore(&info->slock, flags);
1627
1628 buf += c;
1629 count -= c;
1630 retval += c;
1631 }
1632
1633 if ((retval > 0) && !tty->stopped)
1634 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1635
1636end:
1637 if (info->xmit_cnt < WAKEUP_CHARS) {
1638 tty_wakeup(tty);
1639#ifdef ROCKETPORT_HAVE_POLL_WAIT
1640 wake_up_interruptible(&tty->poll_wait);
1641#endif
1642 }
1643 mutex_unlock(&info->write_mtx);
1644 return retval;
1645}
1646
1647/*
1648 * Return the number of characters that can be sent. We estimate
1649 * only using the in-memory transmit buffer only, and ignore the
1650 * potential space in the transmit FIFO.
1651 */
1652static int rp_write_room(struct tty_struct *tty)
1653{
1654 struct r_port *info = tty->driver_data;
1655 int ret;
1656
1657 if (rocket_paranoia_check(info, "rp_write_room"))
1658 return 0;
1659
1660 ret = XMIT_BUF_SIZE - info->xmit_cnt - 1;
1661 if (ret < 0)
1662 ret = 0;
1663#ifdef ROCKET_DEBUG_WRITE
1664 printk(KERN_INFO "rp_write_room returns %d...\n", ret);
1665#endif
1666 return ret;
1667}
1668
1669/*
1670 * Return the number of characters in the buffer. Again, this only
1671 * counts those characters in the in-memory transmit buffer.
1672 */
1673static int rp_chars_in_buffer(struct tty_struct *tty)
1674{
1675 struct r_port *info = tty->driver_data;
1676
1677 if (rocket_paranoia_check(info, "rp_chars_in_buffer"))
1678 return 0;
1679
1680#ifdef ROCKET_DEBUG_WRITE
1681 printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt);
1682#endif
1683 return info->xmit_cnt;
1684}
1685
1686/*
1687 * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the
1688 * r_port struct for the port. Note that spinlock are used to protect info members,
1689 * do not call this function if the spinlock is already held.
1690 */
1691static void rp_flush_buffer(struct tty_struct *tty)
1692{
1693 struct r_port *info = tty->driver_data;
1694 CHANNEL_t *cp;
1695 unsigned long flags;
1696
1697 if (rocket_paranoia_check(info, "rp_flush_buffer"))
1698 return;
1699
1700 spin_lock_irqsave(&info->slock, flags);
1701 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1702 spin_unlock_irqrestore(&info->slock, flags);
1703
1704#ifdef ROCKETPORT_HAVE_POLL_WAIT
1705 wake_up_interruptible(&tty->poll_wait);
1706#endif
1707 tty_wakeup(tty);
1708
1709 cp = &info->channel;
1710 sFlushTxFIFO(cp);
1711}
1712
1713#ifdef CONFIG_PCI
1714
1715static const struct pci_device_id rocket_pci_ids[] = {
1716 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4QUAD) },
1717 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8OCTA) },
1718 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8OCTA) },
1719 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8INTF) },
1720 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8INTF) },
1721 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8J) },
1722 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4J) },
1723 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8SNI) },
1724 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16SNI) },
1725 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16INTF) },
1726 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP16INTF) },
1727 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_CRP16INTF) },
1728 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP32INTF) },
1729 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP32INTF) },
1730 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP4) },
1731 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP8) },
1732 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_232) },
1733 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_422) },
1734 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP6M) },
1735 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4M) },
1736 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_8PORT) },
1737 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_4PORT) },
1738 { }
1739};
1740MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
1741
1742/* Resets the speaker controller on RocketModem II and III devices */
1743static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
1744{
1745 ByteIO_t addr;
1746
1747 /* RocketModem II speaker control is at the 8th port location of offset 0x40 */
1748 if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
1749 addr = CtlP->AiopIO[0] + 0x4F;
1750 sOutB(addr, 0);
1751 }
1752
1753 /* RocketModem III speaker control is at the 1st port location of offset 0x80 */
1754 if ((model == MODEL_UPCI_RM3_8PORT)
1755 || (model == MODEL_UPCI_RM3_4PORT)) {
1756 addr = CtlP->AiopIO[0] + 0x88;
1757 sOutB(addr, 0);
1758 }
1759}
1760
1761/***************************************************************************
1762Function: sPCIInitController
1763Purpose: Initialization of controller global registers and controller
1764 structure.
1765Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
1766 IRQNum,Frequency,PeriodicOnly)
1767 CONTROLLER_T *CtlP; Ptr to controller structure
1768 int CtlNum; Controller number
1769 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
1770 This list must be in the order the AIOPs will be found on the
1771 controller. Once an AIOP in the list is not found, it is
1772 assumed that there are no more AIOPs on the controller.
1773 int AiopIOListSize; Number of addresses in AiopIOList
1774 int IRQNum; Interrupt Request number. Can be any of the following:
1775 0: Disable global interrupts
1776 3: IRQ 3
1777 4: IRQ 4
1778 5: IRQ 5
1779 9: IRQ 9
1780 10: IRQ 10
1781 11: IRQ 11
1782 12: IRQ 12
1783 15: IRQ 15
1784 Byte_t Frequency: A flag identifying the frequency
1785 of the periodic interrupt, can be any one of the following:
1786 FREQ_DIS - periodic interrupt disabled
1787 FREQ_137HZ - 137 Hertz
1788 FREQ_69HZ - 69 Hertz
1789 FREQ_34HZ - 34 Hertz
1790 FREQ_17HZ - 17 Hertz
1791 FREQ_9HZ - 9 Hertz
1792 FREQ_4HZ - 4 Hertz
1793 If IRQNum is set to 0 the Frequency parameter is
1794 overidden, it is forced to a value of FREQ_DIS.
1795 int PeriodicOnly: 1 if all interrupts except the periodic
1796 interrupt are to be blocked.
1797 0 is both the periodic interrupt and
1798 other channel interrupts are allowed.
1799 If IRQNum is set to 0 the PeriodicOnly parameter is
1800 overidden, it is forced to a value of 0.
1801Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
1802 initialization failed.
1803
1804Comments:
1805 If periodic interrupts are to be disabled but AIOP interrupts
1806 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
1807
1808 If interrupts are to be completely disabled set IRQNum to 0.
1809
1810 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
1811 invalid combination.
1812
1813 This function performs initialization of global interrupt modes,
1814 but it does not actually enable global interrupts. To enable
1815 and disable global interrupts use functions sEnGlobalInt() and
1816 sDisGlobalInt(). Enabling of global interrupts is normally not
1817 done until all other initializations are complete.
1818
1819 Even if interrupts are globally enabled, they must also be
1820 individually enabled for each channel that is to generate
1821 interrupts.
1822
1823Warnings: No range checking on any of the parameters is done.
1824
1825 No context switches are allowed while executing this function.
1826
1827 After this function all AIOPs on the controller are disabled,
1828 they can be enabled with sEnAiop().
1829*/
1830static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
1831 ByteIO_t * AiopIOList, int AiopIOListSize,
1832 WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
1833 int PeriodicOnly, int altChanRingIndicator,
1834 int UPCIRingInd)
1835{
1836 int i;
1837 ByteIO_t io;
1838
1839 CtlP->AltChanRingIndicator = altChanRingIndicator;
1840 CtlP->UPCIRingInd = UPCIRingInd;
1841 CtlP->CtlNum = CtlNum;
1842 CtlP->CtlID = CTLID_0001; /* controller release 1 */
1843 CtlP->BusType = isPCI; /* controller release 1 */
1844
1845 if (ConfigIO) {
1846 CtlP->isUPCI = 1;
1847 CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
1848 CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
1849 CtlP->AiopIntrBits = upci_aiop_intr_bits;
1850 } else {
1851 CtlP->isUPCI = 0;
1852 CtlP->PCIIO =
1853 (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
1854 CtlP->AiopIntrBits = aiop_intr_bits;
1855 }
1856
1857 sPCIControllerEOI(CtlP); /* clear EOI if warm init */
1858 /* Init AIOPs */
1859 CtlP->NumAiop = 0;
1860 for (i = 0; i < AiopIOListSize; i++) {
1861 io = AiopIOList[i];
1862 CtlP->AiopIO[i] = (WordIO_t) io;
1863 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
1864
1865 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
1866 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
1867 break; /* done looking for AIOPs */
1868
1869 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
1870 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
1871 sOutB(io + _INDX_DATA, sClockPrescale);
1872 CtlP->NumAiop++; /* bump count of AIOPs */
1873 }
1874
1875 if (CtlP->NumAiop == 0)
1876 return (-1);
1877 else
1878 return (CtlP->NumAiop);
1879}
1880
1881/*
1882 * Called when a PCI card is found. Retrieves and stores model information,
1883 * init's aiopic and serial port hardware.
1884 * Inputs: i is the board number (0-n)
1885 */
1886static __init int register_PCI(int i, struct pci_dev *dev)
1887{
1888 int num_aiops, aiop, max_num_aiops, chan;
1889 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
1890 CONTROLLER_t *ctlp;
1891
1892 int fast_clock = 0;
1893 int altChanRingIndicator = 0;
1894 int ports_per_aiop = 8;
1895 WordIO_t ConfigIO = 0;
1896 ByteIO_t UPCIRingInd = 0;
1897
1898 if (!dev || !pci_match_id(rocket_pci_ids, dev) ||
1899 pci_enable_device(dev) || i >= NUM_BOARDS)
1900 return 0;
1901
1902 rcktpt_io_addr[i] = pci_resource_start(dev, 0);
1903
1904 rcktpt_type[i] = ROCKET_TYPE_NORMAL;
1905 rocketModel[i].loadrm2 = 0;
1906 rocketModel[i].startingPortNumber = nextLineNumber;
1907
1908 /* Depending on the model, set up some config variables */
1909 switch (dev->device) {
1910 case PCI_DEVICE_ID_RP4QUAD:
1911 max_num_aiops = 1;
1912 ports_per_aiop = 4;
1913 rocketModel[i].model = MODEL_RP4QUAD;
1914 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable");
1915 rocketModel[i].numPorts = 4;
1916 break;
1917 case PCI_DEVICE_ID_RP8OCTA:
1918 max_num_aiops = 1;
1919 rocketModel[i].model = MODEL_RP8OCTA;
1920 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable");
1921 rocketModel[i].numPorts = 8;
1922 break;
1923 case PCI_DEVICE_ID_URP8OCTA:
1924 max_num_aiops = 1;
1925 rocketModel[i].model = MODEL_UPCI_RP8OCTA;
1926 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable");
1927 rocketModel[i].numPorts = 8;
1928 break;
1929 case PCI_DEVICE_ID_RP8INTF:
1930 max_num_aiops = 1;
1931 rocketModel[i].model = MODEL_RP8INTF;
1932 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F");
1933 rocketModel[i].numPorts = 8;
1934 break;
1935 case PCI_DEVICE_ID_URP8INTF:
1936 max_num_aiops = 1;
1937 rocketModel[i].model = MODEL_UPCI_RP8INTF;
1938 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F");
1939 rocketModel[i].numPorts = 8;
1940 break;
1941 case PCI_DEVICE_ID_RP8J:
1942 max_num_aiops = 1;
1943 rocketModel[i].model = MODEL_RP8J;
1944 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors");
1945 rocketModel[i].numPorts = 8;
1946 break;
1947 case PCI_DEVICE_ID_RP4J:
1948 max_num_aiops = 1;
1949 ports_per_aiop = 4;
1950 rocketModel[i].model = MODEL_RP4J;
1951 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors");
1952 rocketModel[i].numPorts = 4;
1953 break;
1954 case PCI_DEVICE_ID_RP8SNI:
1955 max_num_aiops = 1;
1956 rocketModel[i].model = MODEL_RP8SNI;
1957 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78");
1958 rocketModel[i].numPorts = 8;
1959 break;
1960 case PCI_DEVICE_ID_RP16SNI:
1961 max_num_aiops = 2;
1962 rocketModel[i].model = MODEL_RP16SNI;
1963 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78");
1964 rocketModel[i].numPorts = 16;
1965 break;
1966 case PCI_DEVICE_ID_RP16INTF:
1967 max_num_aiops = 2;
1968 rocketModel[i].model = MODEL_RP16INTF;
1969 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F");
1970 rocketModel[i].numPorts = 16;
1971 break;
1972 case PCI_DEVICE_ID_URP16INTF:
1973 max_num_aiops = 2;
1974 rocketModel[i].model = MODEL_UPCI_RP16INTF;
1975 strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F");
1976 rocketModel[i].numPorts = 16;
1977 break;
1978 case PCI_DEVICE_ID_CRP16INTF:
1979 max_num_aiops = 2;
1980 rocketModel[i].model = MODEL_CPCI_RP16INTF;
1981 strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F");
1982 rocketModel[i].numPorts = 16;
1983 break;
1984 case PCI_DEVICE_ID_RP32INTF:
1985 max_num_aiops = 4;
1986 rocketModel[i].model = MODEL_RP32INTF;
1987 strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F");
1988 rocketModel[i].numPorts = 32;
1989 break;
1990 case PCI_DEVICE_ID_URP32INTF:
1991 max_num_aiops = 4;
1992 rocketModel[i].model = MODEL_UPCI_RP32INTF;
1993 strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F");
1994 rocketModel[i].numPorts = 32;
1995 break;
1996 case PCI_DEVICE_ID_RPP4:
1997 max_num_aiops = 1;
1998 ports_per_aiop = 4;
1999 altChanRingIndicator++;
2000 fast_clock++;
2001 rocketModel[i].model = MODEL_RPP4;
2002 strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port");
2003 rocketModel[i].numPorts = 4;
2004 break;
2005 case PCI_DEVICE_ID_RPP8:
2006 max_num_aiops = 2;
2007 ports_per_aiop = 4;
2008 altChanRingIndicator++;
2009 fast_clock++;
2010 rocketModel[i].model = MODEL_RPP8;
2011 strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port");
2012 rocketModel[i].numPorts = 8;
2013 break;
2014 case PCI_DEVICE_ID_RP2_232:
2015 max_num_aiops = 1;
2016 ports_per_aiop = 2;
2017 altChanRingIndicator++;
2018 fast_clock++;
2019 rocketModel[i].model = MODEL_RP2_232;
2020 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232");
2021 rocketModel[i].numPorts = 2;
2022 break;
2023 case PCI_DEVICE_ID_RP2_422:
2024 max_num_aiops = 1;
2025 ports_per_aiop = 2;
2026 altChanRingIndicator++;
2027 fast_clock++;
2028 rocketModel[i].model = MODEL_RP2_422;
2029 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422");
2030 rocketModel[i].numPorts = 2;
2031 break;
2032 case PCI_DEVICE_ID_RP6M:
2033
2034 max_num_aiops = 1;
2035 ports_per_aiop = 6;
2036
2037 /* If revision is 1, the rocketmodem flash must be loaded.
2038 * If it is 2 it is a "socketed" version. */
2039 if (dev->revision == 1) {
2040 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2041 rocketModel[i].loadrm2 = 1;
2042 } else {
2043 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2044 }
2045
2046 rocketModel[i].model = MODEL_RP6M;
2047 strcpy(rocketModel[i].modelString, "RocketModem 6 port");
2048 rocketModel[i].numPorts = 6;
2049 break;
2050 case PCI_DEVICE_ID_RP4M:
2051 max_num_aiops = 1;
2052 ports_per_aiop = 4;
2053 if (dev->revision == 1) {
2054 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2055 rocketModel[i].loadrm2 = 1;
2056 } else {
2057 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2058 }
2059
2060 rocketModel[i].model = MODEL_RP4M;
2061 strcpy(rocketModel[i].modelString, "RocketModem 4 port");
2062 rocketModel[i].numPorts = 4;
2063 break;
2064 default:
2065 max_num_aiops = 0;
2066 break;
2067 }
2068
2069 /*
2070 * Check for UPCI boards.
2071 */
2072
2073 switch (dev->device) {
2074 case PCI_DEVICE_ID_URP32INTF:
2075 case PCI_DEVICE_ID_URP8INTF:
2076 case PCI_DEVICE_ID_URP16INTF:
2077 case PCI_DEVICE_ID_CRP16INTF:
2078 case PCI_DEVICE_ID_URP8OCTA:
2079 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2080 ConfigIO = pci_resource_start(dev, 1);
2081 if (dev->device == PCI_DEVICE_ID_URP8OCTA) {
2082 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2083
2084 /*
2085 * Check for octa or quad cable.
2086 */
2087 if (!
2088 (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) &
2089 PCI_GPIO_CTRL_8PORT)) {
2090 ports_per_aiop = 4;
2091 rocketModel[i].numPorts = 4;
2092 }
2093 }
2094 break;
2095 case PCI_DEVICE_ID_UPCI_RM3_8PORT:
2096 max_num_aiops = 1;
2097 rocketModel[i].model = MODEL_UPCI_RM3_8PORT;
2098 strcpy(rocketModel[i].modelString, "RocketModem III 8 port");
2099 rocketModel[i].numPorts = 8;
2100 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2101 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2102 ConfigIO = pci_resource_start(dev, 1);
2103 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2104 break;
2105 case PCI_DEVICE_ID_UPCI_RM3_4PORT:
2106 max_num_aiops = 1;
2107 rocketModel[i].model = MODEL_UPCI_RM3_4PORT;
2108 strcpy(rocketModel[i].modelString, "RocketModem III 4 port");
2109 rocketModel[i].numPorts = 4;
2110 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2111 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2112 ConfigIO = pci_resource_start(dev, 1);
2113 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2114 break;
2115 default:
2116 break;
2117 }
2118
2119 if (fast_clock) {
2120 sClockPrescale = 0x12; /* mod 2 (divide by 3) */
2121 rp_baud_base[i] = 921600;
2122 } else {
2123 /*
2124 * If support_low_speed is set, use the slow clock
2125 * prescale, which supports 50 bps
2126 */
2127 if (support_low_speed) {
2128 /* mod 9 (divide by 10) prescale */
2129 sClockPrescale = 0x19;
2130 rp_baud_base[i] = 230400;
2131 } else {
2132 /* mod 4 (divide by 5) prescale */
2133 sClockPrescale = 0x14;
2134 rp_baud_base[i] = 460800;
2135 }
2136 }
2137
2138 for (aiop = 0; aiop < max_num_aiops; aiop++)
2139 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40);
2140 ctlp = sCtlNumToCtlPtr(i);
2141 num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd);
2142 for (aiop = 0; aiop < max_num_aiops; aiop++)
2143 ctlp->AiopNumChan[aiop] = ports_per_aiop;
2144
2145 dev_info(&dev->dev, "comtrol PCI controller #%d found at "
2146 "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n",
2147 i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString,
2148 rocketModel[i].startingPortNumber,
2149 rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1);
2150
2151 if (num_aiops <= 0) {
2152 rcktpt_io_addr[i] = 0;
2153 return (0);
2154 }
2155 is_PCI[i] = 1;
2156
2157 /* Reset the AIOPIC, init the serial ports */
2158 for (aiop = 0; aiop < num_aiops; aiop++) {
2159 sResetAiopByNum(ctlp, aiop);
2160 for (chan = 0; chan < ports_per_aiop; chan++)
2161 init_r_port(i, aiop, chan, dev);
2162 }
2163
2164 /* Rocket modems must be reset */
2165 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
2166 (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
2167 (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
2168 for (chan = 0; chan < ports_per_aiop; chan++)
2169 sPCIModemReset(ctlp, chan, 1);
2170 msleep(500);
2171 for (chan = 0; chan < ports_per_aiop; chan++)
2172 sPCIModemReset(ctlp, chan, 0);
2173 msleep(500);
2174 rmSpeakerReset(ctlp, rocketModel[i].model);
2175 }
2176 return (1);
2177}
2178
2179/*
2180 * Probes for PCI cards, inits them if found
2181 * Input: board_found = number of ISA boards already found, or the
2182 * starting board number
2183 * Returns: Number of PCI boards found
2184 */
2185static int __init init_PCI(int boards_found)
2186{
2187 struct pci_dev *dev = NULL;
2188 int count = 0;
2189
2190 /* Work through the PCI device list, pulling out ours */
2191 while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
2192 if (register_PCI(count + boards_found, dev))
2193 count++;
2194 }
2195 return (count);
2196}
2197
2198#endif /* CONFIG_PCI */
2199
2200/*
2201 * Probes for ISA cards
2202 * Input: i = the board number to look for
2203 * Returns: 1 if board found, 0 else
2204 */
2205static int __init init_ISA(int i)
2206{
2207 int num_aiops, num_chan = 0, total_num_chan = 0;
2208 int aiop, chan;
2209 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
2210 CONTROLLER_t *ctlp;
2211 char *type_string;
2212
2213 /* If io_addr is zero, no board configured */
2214 if (rcktpt_io_addr[i] == 0)
2215 return (0);
2216
2217 /* Reserve the IO region */
2218 if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
2219 printk(KERN_ERR "Unable to reserve IO region for configured "
2220 "ISA RocketPort at address 0x%lx, board not "
2221 "installed...\n", rcktpt_io_addr[i]);
2222 rcktpt_io_addr[i] = 0;
2223 return (0);
2224 }
2225
2226 ctlp = sCtlNumToCtlPtr(i);
2227
2228 ctlp->boardType = rcktpt_type[i];
2229
2230 switch (rcktpt_type[i]) {
2231 case ROCKET_TYPE_PC104:
2232 type_string = "(PC104)";
2233 break;
2234 case ROCKET_TYPE_MODEM:
2235 type_string = "(RocketModem)";
2236 break;
2237 case ROCKET_TYPE_MODEMII:
2238 type_string = "(RocketModem II)";
2239 break;
2240 default:
2241 type_string = "";
2242 break;
2243 }
2244
2245 /*
2246 * If support_low_speed is set, use the slow clock prescale,
2247 * which supports 50 bps
2248 */
2249 if (support_low_speed) {
2250 sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */
2251 rp_baud_base[i] = 230400;
2252 } else {
2253 sClockPrescale = 0x14; /* mod 4 (divide by 5) prescale */
2254 rp_baud_base[i] = 460800;
2255 }
2256
2257 for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
2258 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
2259
2260 num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
2261
2262 if (ctlp->boardType == ROCKET_TYPE_PC104) {
2263 sEnAiop(ctlp, 2); /* only one AIOPIC, but these */
2264 sEnAiop(ctlp, 3); /* CSels used for other stuff */
2265 }
2266
2267 /* If something went wrong initing the AIOP's release the ISA IO memory */
2268 if (num_aiops <= 0) {
2269 release_region(rcktpt_io_addr[i], 64);
2270 rcktpt_io_addr[i] = 0;
2271 return (0);
2272 }
2273
2274 rocketModel[i].startingPortNumber = nextLineNumber;
2275
2276 for (aiop = 0; aiop < num_aiops; aiop++) {
2277 sResetAiopByNum(ctlp, aiop);
2278 sEnAiop(ctlp, aiop);
2279 num_chan = sGetAiopNumChan(ctlp, aiop);
2280 total_num_chan += num_chan;
2281 for (chan = 0; chan < num_chan; chan++)
2282 init_r_port(i, aiop, chan, NULL);
2283 }
2284 is_PCI[i] = 0;
2285 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) {
2286 num_chan = sGetAiopNumChan(ctlp, 0);
2287 total_num_chan = num_chan;
2288 for (chan = 0; chan < num_chan; chan++)
2289 sModemReset(ctlp, chan, 1);
2290 msleep(500);
2291 for (chan = 0; chan < num_chan; chan++)
2292 sModemReset(ctlp, chan, 0);
2293 msleep(500);
2294 strcpy(rocketModel[i].modelString, "RocketModem ISA");
2295 } else {
2296 strcpy(rocketModel[i].modelString, "RocketPort ISA");
2297 }
2298 rocketModel[i].numPorts = total_num_chan;
2299 rocketModel[i].model = MODEL_ISA;
2300
2301 printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
2302 i, rcktpt_io_addr[i], num_aiops, type_string);
2303
2304 printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
2305 rocketModel[i].modelString,
2306 rocketModel[i].startingPortNumber,
2307 rocketModel[i].startingPortNumber +
2308 rocketModel[i].numPorts - 1);
2309
2310 return (1);
2311}
2312
2313static const struct tty_operations rocket_ops = {
2314 .open = rp_open,
2315 .close = rp_close,
2316 .write = rp_write,
2317 .put_char = rp_put_char,
2318 .write_room = rp_write_room,
2319 .chars_in_buffer = rp_chars_in_buffer,
2320 .flush_buffer = rp_flush_buffer,
2321 .ioctl = rp_ioctl,
2322 .throttle = rp_throttle,
2323 .unthrottle = rp_unthrottle,
2324 .set_termios = rp_set_termios,
2325 .stop = rp_stop,
2326 .start = rp_start,
2327 .hangup = rp_hangup,
2328 .break_ctl = rp_break,
2329 .send_xchar = rp_send_xchar,
2330 .wait_until_sent = rp_wait_until_sent,
2331 .tiocmget = rp_tiocmget,
2332 .tiocmset = rp_tiocmset,
2333};
2334
2335static const struct tty_port_operations rocket_port_ops = {
2336 .carrier_raised = carrier_raised,
2337 .dtr_rts = dtr_rts,
2338};
2339
2340/*
2341 * The module "startup" routine; it's run when the module is loaded.
2342 */
2343static int __init rp_init(void)
2344{
2345 int ret = -ENOMEM, pci_boards_found, isa_boards_found, i;
2346
2347 printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
2348 ROCKET_VERSION, ROCKET_DATE);
2349
2350 rocket_driver = alloc_tty_driver(MAX_RP_PORTS);
2351 if (!rocket_driver)
2352 goto err;
2353
2354 /*
2355 * If board 1 is non-zero, there is at least one ISA configured. If controller is
2356 * zero, use the default controller IO address of board1 + 0x40.
2357 */
2358 if (board1) {
2359 if (controller == 0)
2360 controller = board1 + 0x40;
2361 } else {
2362 controller = 0; /* Used as a flag, meaning no ISA boards */
2363 }
2364
2365 /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
2366 if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
2367 printk(KERN_ERR "Unable to reserve IO region for first "
2368 "configured ISA RocketPort controller 0x%lx. "
2369 "Driver exiting\n", controller);
2370 ret = -EBUSY;
2371 goto err_tty;
2372 }
2373
2374 /* Store ISA variable retrieved from command line or .conf file. */
2375 rcktpt_io_addr[0] = board1;
2376 rcktpt_io_addr[1] = board2;
2377 rcktpt_io_addr[2] = board3;
2378 rcktpt_io_addr[3] = board4;
2379
2380 rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2381 rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0];
2382 rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2383 rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1];
2384 rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2385 rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2];
2386 rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2387 rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3];
2388
2389 /*
2390 * Set up the tty driver structure and then register this
2391 * driver with the tty layer.
2392 */
2393
2394 rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV;
2395 rocket_driver->name = "ttyR";
2396 rocket_driver->driver_name = "Comtrol RocketPort";
2397 rocket_driver->major = TTY_ROCKET_MAJOR;
2398 rocket_driver->minor_start = 0;
2399 rocket_driver->type = TTY_DRIVER_TYPE_SERIAL;
2400 rocket_driver->subtype = SERIAL_TYPE_NORMAL;
2401 rocket_driver->init_termios = tty_std_termios;
2402 rocket_driver->init_termios.c_cflag =
2403 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2404 rocket_driver->init_termios.c_ispeed = 9600;
2405 rocket_driver->init_termios.c_ospeed = 9600;
2406#ifdef ROCKET_SOFT_FLOW
2407 rocket_driver->flags |= TTY_DRIVER_REAL_RAW;
2408#endif
2409 tty_set_operations(rocket_driver, &rocket_ops);
2410
2411 ret = tty_register_driver(rocket_driver);
2412 if (ret < 0) {
2413 printk(KERN_ERR "Couldn't install tty RocketPort driver\n");
2414 goto err_controller;
2415 }
2416
2417#ifdef ROCKET_DEBUG_OPEN
2418 printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major);
2419#endif
2420
2421 /*
2422 * OK, let's probe each of the controllers looking for boards. Any boards found
2423 * will be initialized here.
2424 */
2425 isa_boards_found = 0;
2426 pci_boards_found = 0;
2427
2428 for (i = 0; i < NUM_BOARDS; i++) {
2429 if (init_ISA(i))
2430 isa_boards_found++;
2431 }
2432
2433#ifdef CONFIG_PCI
2434 if (isa_boards_found < NUM_BOARDS)
2435 pci_boards_found = init_PCI(isa_boards_found);
2436#endif
2437
2438 max_board = pci_boards_found + isa_boards_found;
2439
2440 if (max_board == 0) {
2441 printk(KERN_ERR "No rocketport ports found; unloading driver\n");
2442 ret = -ENXIO;
2443 goto err_ttyu;
2444 }
2445
2446 return 0;
2447err_ttyu:
2448 tty_unregister_driver(rocket_driver);
2449err_controller:
2450 if (controller)
2451 release_region(controller, 4);
2452err_tty:
2453 put_tty_driver(rocket_driver);
2454err:
2455 return ret;
2456}
2457
2458
2459static void rp_cleanup_module(void)
2460{
2461 int retval;
2462 int i;
2463
2464 del_timer_sync(&rocket_timer);
2465
2466 retval = tty_unregister_driver(rocket_driver);
2467 if (retval)
2468 printk(KERN_ERR "Error %d while trying to unregister "
2469 "rocketport driver\n", -retval);
2470
2471 for (i = 0; i < MAX_RP_PORTS; i++)
2472 if (rp_table[i]) {
2473 tty_unregister_device(rocket_driver, i);
2474 tty_port_destroy(&rp_table[i]->port);
2475 kfree(rp_table[i]);
2476 }
2477
2478 put_tty_driver(rocket_driver);
2479
2480 for (i = 0; i < NUM_BOARDS; i++) {
2481 if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
2482 continue;
2483 release_region(rcktpt_io_addr[i], 64);
2484 }
2485 if (controller)
2486 release_region(controller, 4);
2487}
2488
2489/***************************************************************************
2490Function: sInitController
2491Purpose: Initialization of controller global registers and controller
2492 structure.
2493Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
2494 IRQNum,Frequency,PeriodicOnly)
2495 CONTROLLER_T *CtlP; Ptr to controller structure
2496 int CtlNum; Controller number
2497 ByteIO_t MudbacIO; Mudbac base I/O address.
2498 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2499 This list must be in the order the AIOPs will be found on the
2500 controller. Once an AIOP in the list is not found, it is
2501 assumed that there are no more AIOPs on the controller.
2502 int AiopIOListSize; Number of addresses in AiopIOList
2503 int IRQNum; Interrupt Request number. Can be any of the following:
2504 0: Disable global interrupts
2505 3: IRQ 3
2506 4: IRQ 4
2507 5: IRQ 5
2508 9: IRQ 9
2509 10: IRQ 10
2510 11: IRQ 11
2511 12: IRQ 12
2512 15: IRQ 15
2513 Byte_t Frequency: A flag identifying the frequency
2514 of the periodic interrupt, can be any one of the following:
2515 FREQ_DIS - periodic interrupt disabled
2516 FREQ_137HZ - 137 Hertz
2517 FREQ_69HZ - 69 Hertz
2518 FREQ_34HZ - 34 Hertz
2519 FREQ_17HZ - 17 Hertz
2520 FREQ_9HZ - 9 Hertz
2521 FREQ_4HZ - 4 Hertz
2522 If IRQNum is set to 0 the Frequency parameter is
2523 overidden, it is forced to a value of FREQ_DIS.
2524 int PeriodicOnly: 1 if all interrupts except the periodic
2525 interrupt are to be blocked.
2526 0 is both the periodic interrupt and
2527 other channel interrupts are allowed.
2528 If IRQNum is set to 0 the PeriodicOnly parameter is
2529 overidden, it is forced to a value of 0.
2530Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
2531 initialization failed.
2532
2533Comments:
2534 If periodic interrupts are to be disabled but AIOP interrupts
2535 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
2536
2537 If interrupts are to be completely disabled set IRQNum to 0.
2538
2539 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
2540 invalid combination.
2541
2542 This function performs initialization of global interrupt modes,
2543 but it does not actually enable global interrupts. To enable
2544 and disable global interrupts use functions sEnGlobalInt() and
2545 sDisGlobalInt(). Enabling of global interrupts is normally not
2546 done until all other initializations are complete.
2547
2548 Even if interrupts are globally enabled, they must also be
2549 individually enabled for each channel that is to generate
2550 interrupts.
2551
2552Warnings: No range checking on any of the parameters is done.
2553
2554 No context switches are allowed while executing this function.
2555
2556 After this function all AIOPs on the controller are disabled,
2557 they can be enabled with sEnAiop().
2558*/
2559static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
2560 ByteIO_t * AiopIOList, int AiopIOListSize,
2561 int IRQNum, Byte_t Frequency, int PeriodicOnly)
2562{
2563 int i;
2564 ByteIO_t io;
2565 int done;
2566
2567 CtlP->AiopIntrBits = aiop_intr_bits;
2568 CtlP->AltChanRingIndicator = 0;
2569 CtlP->CtlNum = CtlNum;
2570 CtlP->CtlID = CTLID_0001; /* controller release 1 */
2571 CtlP->BusType = isISA;
2572 CtlP->MBaseIO = MudbacIO;
2573 CtlP->MReg1IO = MudbacIO + 1;
2574 CtlP->MReg2IO = MudbacIO + 2;
2575 CtlP->MReg3IO = MudbacIO + 3;
2576#if 1
2577 CtlP->MReg2 = 0; /* interrupt disable */
2578 CtlP->MReg3 = 0; /* no periodic interrupts */
2579#else
2580 if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */
2581 CtlP->MReg2 = 0; /* interrupt disable */
2582 CtlP->MReg3 = 0; /* no periodic interrupts */
2583 } else {
2584 CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */
2585 CtlP->MReg3 = Frequency; /* set frequency */
2586 if (PeriodicOnly) { /* periodic interrupt only */
2587 CtlP->MReg3 |= PERIODIC_ONLY;
2588 }
2589 }
2590#endif
2591 sOutB(CtlP->MReg2IO, CtlP->MReg2);
2592 sOutB(CtlP->MReg3IO, CtlP->MReg3);
2593 sControllerEOI(CtlP); /* clear EOI if warm init */
2594 /* Init AIOPs */
2595 CtlP->NumAiop = 0;
2596 for (i = done = 0; i < AiopIOListSize; i++) {
2597 io = AiopIOList[i];
2598 CtlP->AiopIO[i] = (WordIO_t) io;
2599 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2600 sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */
2601 sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */
2602 if (done)
2603 continue;
2604 sEnAiop(CtlP, i); /* enable the AIOP */
2605 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
2606 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
2607 done = 1; /* done looking for AIOPs */
2608 else {
2609 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2610 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
2611 sOutB(io + _INDX_DATA, sClockPrescale);
2612 CtlP->NumAiop++; /* bump count of AIOPs */
2613 }
2614 sDisAiop(CtlP, i); /* disable AIOP */
2615 }
2616
2617 if (CtlP->NumAiop == 0)
2618 return (-1);
2619 else
2620 return (CtlP->NumAiop);
2621}
2622
2623/***************************************************************************
2624Function: sReadAiopID
2625Purpose: Read the AIOP idenfication number directly from an AIOP.
2626Call: sReadAiopID(io)
2627 ByteIO_t io: AIOP base I/O address
2628Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X
2629 is replace by an identifying number.
2630 Flag AIOPID_NULL if no valid AIOP is found
2631Warnings: No context switches are allowed while executing this function.
2632
2633*/
2634static int sReadAiopID(ByteIO_t io)
2635{
2636 Byte_t AiopID; /* ID byte from AIOP */
2637
2638 sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */
2639 sOutB(io + _CMD_REG, 0x0);
2640 AiopID = sInW(io + _CHN_STAT0) & 0x07;
2641 if (AiopID == 0x06)
2642 return (1);
2643 else /* AIOP does not exist */
2644 return (-1);
2645}
2646
2647/***************************************************************************
2648Function: sReadAiopNumChan
2649Purpose: Read the number of channels available in an AIOP directly from
2650 an AIOP.
2651Call: sReadAiopNumChan(io)
2652 WordIO_t io: AIOP base I/O address
2653Return: int: The number of channels available
2654Comments: The number of channels is determined by write/reads from identical
2655 offsets within the SRAM address spaces for channels 0 and 4.
2656 If the channel 4 space is mirrored to channel 0 it is a 4 channel
2657 AIOP, otherwise it is an 8 channel.
2658Warnings: No context switches are allowed while executing this function.
2659*/
2660static int sReadAiopNumChan(WordIO_t io)
2661{
2662 Word_t x;
2663 static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
2664
2665 /* write to chan 0 SRAM */
2666 out32((DWordIO_t) io + _INDX_ADDR, R);
2667 sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */
2668 x = sInW(io + _INDX_DATA);
2669 sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */
2670 if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */
2671 return (8);
2672 else
2673 return (4);
2674}
2675
2676/***************************************************************************
2677Function: sInitChan
2678Purpose: Initialization of a channel and channel structure
2679Call: sInitChan(CtlP,ChP,AiopNum,ChanNum)
2680 CONTROLLER_T *CtlP; Ptr to controller structure
2681 CHANNEL_T *ChP; Ptr to channel structure
2682 int AiopNum; AIOP number within controller
2683 int ChanNum; Channel number within AIOP
2684Return: int: 1 if initialization succeeded, 0 if it fails because channel
2685 number exceeds number of channels available in AIOP.
2686Comments: This function must be called before a channel can be used.
2687Warnings: No range checking on any of the parameters is done.
2688
2689 No context switches are allowed while executing this function.
2690*/
2691static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
2692 int ChanNum)
2693{
2694 int i;
2695 WordIO_t AiopIO;
2696 WordIO_t ChIOOff;
2697 Byte_t *ChR;
2698 Word_t ChOff;
2699 static Byte_t R[4];
2700 int brd9600;
2701
2702 if (ChanNum >= CtlP->AiopNumChan[AiopNum])
2703 return 0; /* exceeds num chans in AIOP */
2704
2705 /* Channel, AIOP, and controller identifiers */
2706 ChP->CtlP = CtlP;
2707 ChP->ChanID = CtlP->AiopID[AiopNum];
2708 ChP->AiopNum = AiopNum;
2709 ChP->ChanNum = ChanNum;
2710
2711 /* Global direct addresses */
2712 AiopIO = CtlP->AiopIO[AiopNum];
2713 ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG;
2714 ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN;
2715 ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK;
2716 ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR;
2717 ChP->IndexData = AiopIO + _INDX_DATA;
2718
2719 /* Channel direct addresses */
2720 ChIOOff = AiopIO + ChP->ChanNum * 2;
2721 ChP->TxRxData = ChIOOff + _TD0;
2722 ChP->ChanStat = ChIOOff + _CHN_STAT0;
2723 ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
2724 ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0;
2725
2726 /* Initialize the channel from the RData array */
2727 for (i = 0; i < RDATASIZE; i += 4) {
2728 R[0] = RData[i];
2729 R[1] = RData[i + 1] + 0x10 * ChanNum;
2730 R[2] = RData[i + 2];
2731 R[3] = RData[i + 3];
2732 out32(ChP->IndexAddr, R);
2733 }
2734
2735 ChR = ChP->R;
2736 for (i = 0; i < RREGDATASIZE; i += 4) {
2737 ChR[i] = RRegData[i];
2738 ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum;
2739 ChR[i + 2] = RRegData[i + 2];
2740 ChR[i + 3] = RRegData[i + 3];
2741 }
2742
2743 /* Indexed registers */
2744 ChOff = (Word_t) ChanNum *0x1000;
2745
2746 if (sClockPrescale == 0x14)
2747 brd9600 = 47;
2748 else
2749 brd9600 = 23;
2750
2751 ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD);
2752 ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
2753 ChP->BaudDiv[2] = (Byte_t) brd9600;
2754 ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
2755 out32(ChP->IndexAddr, ChP->BaudDiv);
2756
2757 ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
2758 ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
2759 ChP->TxControl[2] = 0;
2760 ChP->TxControl[3] = 0;
2761 out32(ChP->IndexAddr, ChP->TxControl);
2762
2763 ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
2764 ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
2765 ChP->RxControl[2] = 0;
2766 ChP->RxControl[3] = 0;
2767 out32(ChP->IndexAddr, ChP->RxControl);
2768
2769 ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
2770 ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
2771 ChP->TxEnables[2] = 0;
2772 ChP->TxEnables[3] = 0;
2773 out32(ChP->IndexAddr, ChP->TxEnables);
2774
2775 ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
2776 ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
2777 ChP->TxCompare[2] = 0;
2778 ChP->TxCompare[3] = 0;
2779 out32(ChP->IndexAddr, ChP->TxCompare);
2780
2781 ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
2782 ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
2783 ChP->TxReplace1[2] = 0;
2784 ChP->TxReplace1[3] = 0;
2785 out32(ChP->IndexAddr, ChP->TxReplace1);
2786
2787 ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
2788 ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
2789 ChP->TxReplace2[2] = 0;
2790 ChP->TxReplace2[3] = 0;
2791 out32(ChP->IndexAddr, ChP->TxReplace2);
2792
2793 ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
2794 ChP->TxFIFO = ChOff + _TX_FIFO;
2795
2796 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */
2797 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */
2798 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
2799 sOutW(ChP->IndexData, 0);
2800 ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
2801 ChP->RxFIFO = ChOff + _RX_FIFO;
2802
2803 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */
2804 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */
2805 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
2806 sOutW(ChP->IndexData, 0);
2807 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
2808 sOutW(ChP->IndexData, 0);
2809 ChP->TxPrioCnt = ChOff + _TXP_CNT;
2810 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt);
2811 sOutB(ChP->IndexData, 0);
2812 ChP->TxPrioPtr = ChOff + _TXP_PNTR;
2813 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr);
2814 sOutB(ChP->IndexData, 0);
2815 ChP->TxPrioBuf = ChOff + _TXP_BUF;
2816 sEnRxProcessor(ChP); /* start the Rx processor */
2817
2818 return 1;
2819}
2820
2821/***************************************************************************
2822Function: sStopRxProcessor
2823Purpose: Stop the receive processor from processing a channel.
2824Call: sStopRxProcessor(ChP)
2825 CHANNEL_T *ChP; Ptr to channel structure
2826
2827Comments: The receive processor can be started again with sStartRxProcessor().
2828 This function causes the receive processor to skip over the
2829 stopped channel. It does not stop it from processing other channels.
2830
2831Warnings: No context switches are allowed while executing this function.
2832
2833 Do not leave the receive processor stopped for more than one
2834 character time.
2835
2836 After calling this function a delay of 4 uS is required to ensure
2837 that the receive processor is no longer processing this channel.
2838*/
2839static void sStopRxProcessor(CHANNEL_T * ChP)
2840{
2841 Byte_t R[4];
2842
2843 R[0] = ChP->R[0];
2844 R[1] = ChP->R[1];
2845 R[2] = 0x0a;
2846 R[3] = ChP->R[3];
2847 out32(ChP->IndexAddr, R);
2848}
2849
2850/***************************************************************************
2851Function: sFlushRxFIFO
2852Purpose: Flush the Rx FIFO
2853Call: sFlushRxFIFO(ChP)
2854 CHANNEL_T *ChP; Ptr to channel structure
2855Return: void
2856Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
2857 while it is being flushed the receive processor is stopped
2858 and the transmitter is disabled. After these operations a
2859 4 uS delay is done before clearing the pointers to allow
2860 the receive processor to stop. These items are handled inside
2861 this function.
2862Warnings: No context switches are allowed while executing this function.
2863*/
2864static void sFlushRxFIFO(CHANNEL_T * ChP)
2865{
2866 int i;
2867 Byte_t Ch; /* channel number within AIOP */
2868 int RxFIFOEnabled; /* 1 if Rx FIFO enabled */
2869
2870 if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */
2871 return; /* don't need to flush */
2872
2873 RxFIFOEnabled = 0;
2874 if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */
2875 RxFIFOEnabled = 1;
2876 sDisRxFIFO(ChP); /* disable it */
2877 for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */
2878 sInB(ChP->IntChan); /* depends on bus i/o timing */
2879 }
2880 sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */
2881 Ch = (Byte_t) sGetChanNum(ChP);
2882 sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */
2883 sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */
2884 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
2885 sOutW(ChP->IndexData, 0);
2886 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
2887 sOutW(ChP->IndexData, 0);
2888 if (RxFIFOEnabled)
2889 sEnRxFIFO(ChP); /* enable Rx FIFO */
2890}
2891
2892/***************************************************************************
2893Function: sFlushTxFIFO
2894Purpose: Flush the Tx FIFO
2895Call: sFlushTxFIFO(ChP)
2896 CHANNEL_T *ChP; Ptr to channel structure
2897Return: void
2898Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
2899 while it is being flushed the receive processor is stopped
2900 and the transmitter is disabled. After these operations a
2901 4 uS delay is done before clearing the pointers to allow
2902 the receive processor to stop. These items are handled inside
2903 this function.
2904Warnings: No context switches are allowed while executing this function.
2905*/
2906static void sFlushTxFIFO(CHANNEL_T * ChP)
2907{
2908 int i;
2909 Byte_t Ch; /* channel number within AIOP */
2910 int TxEnabled; /* 1 if transmitter enabled */
2911
2912 if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */
2913 return; /* don't need to flush */
2914
2915 TxEnabled = 0;
2916 if (ChP->TxControl[3] & TX_ENABLE) {
2917 TxEnabled = 1;
2918 sDisTransmit(ChP); /* disable transmitter */
2919 }
2920 sStopRxProcessor(ChP); /* stop Rx processor */
2921 for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */
2922 sInB(ChP->IntChan); /* depends on bus i/o timing */
2923 Ch = (Byte_t) sGetChanNum(ChP);
2924 sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */
2925 sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */
2926 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
2927 sOutW(ChP->IndexData, 0);
2928 if (TxEnabled)
2929 sEnTransmit(ChP); /* enable transmitter */
2930 sStartRxProcessor(ChP); /* restart Rx processor */
2931}
2932
2933/***************************************************************************
2934Function: sWriteTxPrioByte
2935Purpose: Write a byte of priority transmit data to a channel
2936Call: sWriteTxPrioByte(ChP,Data)
2937 CHANNEL_T *ChP; Ptr to channel structure
2938 Byte_t Data; The transmit data byte
2939
2940Return: int: 1 if the bytes is successfully written, otherwise 0.
2941
2942Comments: The priority byte is transmitted before any data in the Tx FIFO.
2943
2944Warnings: No context switches are allowed while executing this function.
2945*/
2946static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
2947{
2948 Byte_t DWBuf[4]; /* buffer for double word writes */
2949 Word_t *WordPtr; /* must be far because Win SS != DS */
2950 register DWordIO_t IndexAddr;
2951
2952 if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */
2953 IndexAddr = ChP->IndexAddr;
2954 sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */
2955 if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */
2956 return (0); /* nothing sent */
2957
2958 WordPtr = (Word_t *) (&DWBuf[0]);
2959 *WordPtr = ChP->TxPrioBuf; /* data byte address */
2960
2961 DWBuf[2] = Data; /* data byte value */
2962 out32(IndexAddr, DWBuf); /* write it out */
2963
2964 *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */
2965
2966 DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */
2967 DWBuf[3] = 0; /* priority buffer pointer */
2968 out32(IndexAddr, DWBuf); /* write it out */
2969 } else { /* write it to Tx FIFO */
2970
2971 sWriteTxByte(sGetTxRxDataIO(ChP), Data);
2972 }
2973 return (1); /* 1 byte sent */
2974}
2975
2976/***************************************************************************
2977Function: sEnInterrupts
2978Purpose: Enable one or more interrupts for a channel
2979Call: sEnInterrupts(ChP,Flags)
2980 CHANNEL_T *ChP; Ptr to channel structure
2981 Word_t Flags: Interrupt enable flags, can be any combination
2982 of the following flags:
2983 TXINT_EN: Interrupt on Tx FIFO empty
2984 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
2985 sSetRxTrigger())
2986 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
2987 MCINT_EN: Interrupt on modem input change
2988 CHANINT_EN: Allow channel interrupt signal to the AIOP's
2989 Interrupt Channel Register.
2990Return: void
2991Comments: If an interrupt enable flag is set in Flags, that interrupt will be
2992 enabled. If an interrupt enable flag is not set in Flags, that
2993 interrupt will not be changed. Interrupts can be disabled with
2994 function sDisInterrupts().
2995
2996 This function sets the appropriate bit for the channel in the AIOP's
2997 Interrupt Mask Register if the CHANINT_EN flag is set. This allows
2998 this channel's bit to be set in the AIOP's Interrupt Channel Register.
2999
3000 Interrupts must also be globally enabled before channel interrupts
3001 will be passed on to the host. This is done with function
3002 sEnGlobalInt().
3003
3004 In some cases it may be desirable to disable interrupts globally but
3005 enable channel interrupts. This would allow the global interrupt
3006 status register to be used to determine which AIOPs need service.
3007*/
3008static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
3009{
3010 Byte_t Mask; /* Interrupt Mask Register */
3011
3012 ChP->RxControl[2] |=
3013 ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3014
3015 out32(ChP->IndexAddr, ChP->RxControl);
3016
3017 ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
3018
3019 out32(ChP->IndexAddr, ChP->TxControl);
3020
3021 if (Flags & CHANINT_EN) {
3022 Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
3023 sOutB(ChP->IntMask, Mask);
3024 }
3025}
3026
3027/***************************************************************************
3028Function: sDisInterrupts
3029Purpose: Disable one or more interrupts for a channel
3030Call: sDisInterrupts(ChP,Flags)
3031 CHANNEL_T *ChP; Ptr to channel structure
3032 Word_t Flags: Interrupt flags, can be any combination
3033 of the following flags:
3034 TXINT_EN: Interrupt on Tx FIFO empty
3035 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
3036 sSetRxTrigger())
3037 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
3038 MCINT_EN: Interrupt on modem input change
3039 CHANINT_EN: Disable channel interrupt signal to the
3040 AIOP's Interrupt Channel Register.
3041Return: void
3042Comments: If an interrupt flag is set in Flags, that interrupt will be
3043 disabled. If an interrupt flag is not set in Flags, that
3044 interrupt will not be changed. Interrupts can be enabled with
3045 function sEnInterrupts().
3046
3047 This function clears the appropriate bit for the channel in the AIOP's
3048 Interrupt Mask Register if the CHANINT_EN flag is set. This blocks
3049 this channel's bit from being set in the AIOP's Interrupt Channel
3050 Register.
3051*/
3052static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
3053{
3054 Byte_t Mask; /* Interrupt Mask Register */
3055
3056 ChP->RxControl[2] &=
3057 ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3058 out32(ChP->IndexAddr, ChP->RxControl);
3059 ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
3060 out32(ChP->IndexAddr, ChP->TxControl);
3061
3062 if (Flags & CHANINT_EN) {
3063 Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
3064 sOutB(ChP->IntMask, Mask);
3065 }
3066}
3067
3068static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode)
3069{
3070 sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum);
3071}
3072
3073/*
3074 * Not an official SSCI function, but how to reset RocketModems.
3075 * ISA bus version
3076 */
3077static void sModemReset(CONTROLLER_T * CtlP, int chan, int on)
3078{
3079 ByteIO_t addr;
3080 Byte_t val;
3081
3082 addr = CtlP->AiopIO[0] + 0x400;
3083 val = sInB(CtlP->MReg3IO);
3084 /* if AIOP[1] is not enabled, enable it */
3085 if ((val & 2) == 0) {
3086 val = sInB(CtlP->MReg2IO);
3087 sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03));
3088 sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6));
3089 }
3090
3091 sEnAiop(CtlP, 1);
3092 if (!on)
3093 addr += 8;
3094 sOutB(addr + chan, 0); /* apply or remove reset */
3095 sDisAiop(CtlP, 1);
3096}
3097
3098/*
3099 * Not an official SSCI function, but how to reset RocketModems.
3100 * PCI bus version
3101 */
3102static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
3103{
3104 ByteIO_t addr;
3105
3106 addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */
3107 if (!on)
3108 addr += 8;
3109 sOutB(addr + chan, 0); /* apply or remove reset */
3110}
3111
3112/* Returns the line number given the controller (board), aiop and channel number */
3113static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
3114{
3115 return lineNumbers[(ctrl << 5) | (aiop << 3) | ch];
3116}
3117
3118/*
3119 * Stores the line number associated with a given controller (board), aiop
3120 * and channel number.
3121 * Returns: The line number assigned
3122 */
3123static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
3124{
3125 lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++;
3126 return (nextLineNumber - 1);
3127}
1/*
2 * RocketPort device driver for Linux
3 *
4 * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
5 *
6 * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of the
11 * License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23/*
24 * Kernel Synchronization:
25 *
26 * This driver has 2 kernel control paths - exception handlers (calls into the driver
27 * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts
28 * are not used.
29 *
30 * Critical data:
31 * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
32 * serial port state information and the xmit_buf circular buffer. Protected by
33 * a per port spinlock.
34 * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there
35 * is data to be transmitted. Protected by atomic bit operations.
36 * - rp_num_ports, int indicating number of open ports, protected by atomic operations.
37 *
38 * rp_write() and rp_write_char() functions use a per port semaphore to protect against
39 * simultaneous access to the same port by more than one process.
40 */
41
42/****** Defines ******/
43#define ROCKET_PARANOIA_CHECK
44#define ROCKET_DISABLE_SIMUSAGE
45
46#undef ROCKET_SOFT_FLOW
47#undef ROCKET_DEBUG_OPEN
48#undef ROCKET_DEBUG_INTR
49#undef ROCKET_DEBUG_WRITE
50#undef ROCKET_DEBUG_FLOW
51#undef ROCKET_DEBUG_THROTTLE
52#undef ROCKET_DEBUG_WAIT_UNTIL_SENT
53#undef ROCKET_DEBUG_RECEIVE
54#undef ROCKET_DEBUG_HANGUP
55#undef REV_PCI_ORDER
56#undef ROCKET_DEBUG_IO
57
58#define POLL_PERIOD (HZ/100) /* Polling period .01 seconds (10ms) */
59
60/****** Kernel includes ******/
61
62#include <linux/module.h>
63#include <linux/errno.h>
64#include <linux/major.h>
65#include <linux/kernel.h>
66#include <linux/signal.h>
67#include <linux/slab.h>
68#include <linux/mm.h>
69#include <linux/sched.h>
70#include <linux/timer.h>
71#include <linux/interrupt.h>
72#include <linux/tty.h>
73#include <linux/tty_driver.h>
74#include <linux/tty_flip.h>
75#include <linux/serial.h>
76#include <linux/string.h>
77#include <linux/fcntl.h>
78#include <linux/ptrace.h>
79#include <linux/mutex.h>
80#include <linux/ioport.h>
81#include <linux/delay.h>
82#include <linux/completion.h>
83#include <linux/wait.h>
84#include <linux/pci.h>
85#include <linux/uaccess.h>
86#include <linux/atomic.h>
87#include <asm/unaligned.h>
88#include <linux/bitops.h>
89#include <linux/spinlock.h>
90#include <linux/init.h>
91
92/****** RocketPort includes ******/
93
94#include "rocket_int.h"
95#include "rocket.h"
96
97#define ROCKET_VERSION "2.09"
98#define ROCKET_DATE "12-June-2003"
99
100/****** RocketPort Local Variables ******/
101
102static void rp_do_poll(unsigned long dummy);
103
104static struct tty_driver *rocket_driver;
105
106static struct rocket_version driver_version = {
107 ROCKET_VERSION, ROCKET_DATE
108};
109
110static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */
111static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */
112 /* eg. Bit 0 indicates port 0 has xmit data, ... */
113static atomic_t rp_num_ports_open; /* Number of serial ports open */
114static DEFINE_TIMER(rocket_timer, rp_do_poll, 0, 0);
115
116static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */
117static unsigned long board2;
118static unsigned long board3;
119static unsigned long board4;
120static unsigned long controller;
121static bool support_low_speed;
122static unsigned long modem1;
123static unsigned long modem2;
124static unsigned long modem3;
125static unsigned long modem4;
126static unsigned long pc104_1[8];
127static unsigned long pc104_2[8];
128static unsigned long pc104_3[8];
129static unsigned long pc104_4[8];
130static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 };
131
132static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */
133static unsigned long rcktpt_io_addr[NUM_BOARDS];
134static int rcktpt_type[NUM_BOARDS];
135static int is_PCI[NUM_BOARDS];
136static rocketModel_t rocketModel[NUM_BOARDS];
137static int max_board;
138static const struct tty_port_operations rocket_port_ops;
139
140/*
141 * The following arrays define the interrupt bits corresponding to each AIOP.
142 * These bits are different between the ISA and regular PCI boards and the
143 * Universal PCI boards.
144 */
145
146static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
147 AIOP_INTR_BIT_0,
148 AIOP_INTR_BIT_1,
149 AIOP_INTR_BIT_2,
150 AIOP_INTR_BIT_3
151};
152
153#ifdef CONFIG_PCI
154static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
155 UPCI_AIOP_INTR_BIT_0,
156 UPCI_AIOP_INTR_BIT_1,
157 UPCI_AIOP_INTR_BIT_2,
158 UPCI_AIOP_INTR_BIT_3
159};
160#endif
161
162static Byte_t RData[RDATASIZE] = {
163 0x00, 0x09, 0xf6, 0x82,
164 0x02, 0x09, 0x86, 0xfb,
165 0x04, 0x09, 0x00, 0x0a,
166 0x06, 0x09, 0x01, 0x0a,
167 0x08, 0x09, 0x8a, 0x13,
168 0x0a, 0x09, 0xc5, 0x11,
169 0x0c, 0x09, 0x86, 0x85,
170 0x0e, 0x09, 0x20, 0x0a,
171 0x10, 0x09, 0x21, 0x0a,
172 0x12, 0x09, 0x41, 0xff,
173 0x14, 0x09, 0x82, 0x00,
174 0x16, 0x09, 0x82, 0x7b,
175 0x18, 0x09, 0x8a, 0x7d,
176 0x1a, 0x09, 0x88, 0x81,
177 0x1c, 0x09, 0x86, 0x7a,
178 0x1e, 0x09, 0x84, 0x81,
179 0x20, 0x09, 0x82, 0x7c,
180 0x22, 0x09, 0x0a, 0x0a
181};
182
183static Byte_t RRegData[RREGDATASIZE] = {
184 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */
185 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */
186 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */
187 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */
188 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */
189 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */
190 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */
191 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */
192 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */
193 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */
194 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */
195 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */
196 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */
197};
198
199static CONTROLLER_T sController[CTL_SIZE] = {
200 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
201 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
202 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
203 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
204 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
205 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
206 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
207 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}
208};
209
210static Byte_t sBitMapClrTbl[8] = {
211 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f
212};
213
214static Byte_t sBitMapSetTbl[8] = {
215 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80
216};
217
218static int sClockPrescale = 0x14;
219
220/*
221 * Line number is the ttySIx number (x), the Minor number. We
222 * assign them sequentially, starting at zero. The following
223 * array keeps track of the line number assigned to a given board/aiop/channel.
224 */
225static unsigned char lineNumbers[MAX_RP_PORTS];
226static unsigned long nextLineNumber;
227
228/***** RocketPort Static Prototypes *********/
229static int __init init_ISA(int i);
230static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
231static void rp_flush_buffer(struct tty_struct *tty);
232static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
233static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
234static void rp_start(struct tty_struct *tty);
235static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
236 int ChanNum);
237static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode);
238static void sFlushRxFIFO(CHANNEL_T * ChP);
239static void sFlushTxFIFO(CHANNEL_T * ChP);
240static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags);
241static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
242static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
243static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
244static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
245static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
246 ByteIO_t * AiopIOList, int AiopIOListSize,
247 int IRQNum, Byte_t Frequency, int PeriodicOnly);
248static int sReadAiopID(ByteIO_t io);
249static int sReadAiopNumChan(WordIO_t io);
250
251MODULE_AUTHOR("Theodore Ts'o");
252MODULE_DESCRIPTION("Comtrol RocketPort driver");
253module_param(board1, ulong, 0);
254MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
255module_param(board2, ulong, 0);
256MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
257module_param(board3, ulong, 0);
258MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
259module_param(board4, ulong, 0);
260MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
261module_param(controller, ulong, 0);
262MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
263module_param(support_low_speed, bool, 0);
264MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
265module_param(modem1, ulong, 0);
266MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
267module_param(modem2, ulong, 0);
268MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
269module_param(modem3, ulong, 0);
270MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
271module_param(modem4, ulong, 0);
272MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
273module_param_array(pc104_1, ulong, NULL, 0);
274MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
275module_param_array(pc104_2, ulong, NULL, 0);
276MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
277module_param_array(pc104_3, ulong, NULL, 0);
278MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
279module_param_array(pc104_4, ulong, NULL, 0);
280MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
281
282static int rp_init(void);
283static void rp_cleanup_module(void);
284
285module_init(rp_init);
286module_exit(rp_cleanup_module);
287
288
289MODULE_LICENSE("Dual BSD/GPL");
290
291/*************************************************************************/
292/* Module code starts here */
293
294static inline int rocket_paranoia_check(struct r_port *info,
295 const char *routine)
296{
297#ifdef ROCKET_PARANOIA_CHECK
298 if (!info)
299 return 1;
300 if (info->magic != RPORT_MAGIC) {
301 printk(KERN_WARNING "Warning: bad magic number for rocketport "
302 "struct in %s\n", routine);
303 return 1;
304 }
305#endif
306 return 0;
307}
308
309
310/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
311 * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
312 * tty layer.
313 */
314static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
315 unsigned int ChanStatus)
316{
317 unsigned int CharNStat;
318 int ToRecv, wRecv, space;
319 unsigned char *cbuf;
320
321 ToRecv = sGetRxCnt(cp);
322#ifdef ROCKET_DEBUG_INTR
323 printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv);
324#endif
325 if (ToRecv == 0)
326 return;
327
328 /*
329 * if status indicates there are errored characters in the
330 * FIFO, then enter status mode (a word in FIFO holds
331 * character and status).
332 */
333 if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
334 if (!(ChanStatus & STATMODE)) {
335#ifdef ROCKET_DEBUG_RECEIVE
336 printk(KERN_INFO "Entering STATMODE...\n");
337#endif
338 ChanStatus |= STATMODE;
339 sEnRxStatusMode(cp);
340 }
341 }
342
343 /*
344 * if we previously entered status mode, then read down the
345 * FIFO one word at a time, pulling apart the character and
346 * the status. Update error counters depending on status
347 */
348 if (ChanStatus & STATMODE) {
349#ifdef ROCKET_DEBUG_RECEIVE
350 printk(KERN_INFO "Ignore %x, read %x...\n",
351 info->ignore_status_mask, info->read_status_mask);
352#endif
353 while (ToRecv) {
354 char flag;
355
356 CharNStat = sInW(sGetTxRxDataIO(cp));
357#ifdef ROCKET_DEBUG_RECEIVE
358 printk(KERN_INFO "%x...\n", CharNStat);
359#endif
360 if (CharNStat & STMBREAKH)
361 CharNStat &= ~(STMFRAMEH | STMPARITYH);
362 if (CharNStat & info->ignore_status_mask) {
363 ToRecv--;
364 continue;
365 }
366 CharNStat &= info->read_status_mask;
367 if (CharNStat & STMBREAKH)
368 flag = TTY_BREAK;
369 else if (CharNStat & STMPARITYH)
370 flag = TTY_PARITY;
371 else if (CharNStat & STMFRAMEH)
372 flag = TTY_FRAME;
373 else if (CharNStat & STMRCVROVRH)
374 flag = TTY_OVERRUN;
375 else
376 flag = TTY_NORMAL;
377 tty_insert_flip_char(&info->port, CharNStat & 0xff,
378 flag);
379 ToRecv--;
380 }
381
382 /*
383 * after we've emptied the FIFO in status mode, turn
384 * status mode back off
385 */
386 if (sGetRxCnt(cp) == 0) {
387#ifdef ROCKET_DEBUG_RECEIVE
388 printk(KERN_INFO "Status mode off.\n");
389#endif
390 sDisRxStatusMode(cp);
391 }
392 } else {
393 /*
394 * we aren't in status mode, so read down the FIFO two
395 * characters at time by doing repeated word IO
396 * transfer.
397 */
398 space = tty_prepare_flip_string(&info->port, &cbuf, ToRecv);
399 if (space < ToRecv) {
400#ifdef ROCKET_DEBUG_RECEIVE
401 printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space);
402#endif
403 if (space <= 0)
404 return;
405 ToRecv = space;
406 }
407 wRecv = ToRecv >> 1;
408 if (wRecv)
409 sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
410 if (ToRecv & 1)
411 cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
412 }
413 /* Push the data up to the tty layer */
414 tty_flip_buffer_push(&info->port);
415}
416
417/*
418 * Serial port transmit data function. Called from the timer polling loop as a
419 * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
420 * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
421 * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks.
422 */
423static void rp_do_transmit(struct r_port *info)
424{
425 int c;
426 CHANNEL_t *cp = &info->channel;
427 struct tty_struct *tty;
428 unsigned long flags;
429
430#ifdef ROCKET_DEBUG_INTR
431 printk(KERN_DEBUG "%s\n", __func__);
432#endif
433 if (!info)
434 return;
435 tty = tty_port_tty_get(&info->port);
436
437 if (tty == NULL) {
438 printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__);
439 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
440 return;
441 }
442
443 spin_lock_irqsave(&info->slock, flags);
444 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
445
446 /* Loop sending data to FIFO until done or FIFO full */
447 while (1) {
448 if (tty->stopped)
449 break;
450 c = min(info->xmit_fifo_room, info->xmit_cnt);
451 c = min(c, XMIT_BUF_SIZE - info->xmit_tail);
452 if (c <= 0 || info->xmit_fifo_room <= 0)
453 break;
454 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
455 if (c & 1)
456 sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]);
457 info->xmit_tail += c;
458 info->xmit_tail &= XMIT_BUF_SIZE - 1;
459 info->xmit_cnt -= c;
460 info->xmit_fifo_room -= c;
461#ifdef ROCKET_DEBUG_INTR
462 printk(KERN_INFO "tx %d chars...\n", c);
463#endif
464 }
465
466 if (info->xmit_cnt == 0)
467 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
468
469 if (info->xmit_cnt < WAKEUP_CHARS) {
470 tty_wakeup(tty);
471#ifdef ROCKETPORT_HAVE_POLL_WAIT
472 wake_up_interruptible(&tty->poll_wait);
473#endif
474 }
475
476 spin_unlock_irqrestore(&info->slock, flags);
477 tty_kref_put(tty);
478
479#ifdef ROCKET_DEBUG_INTR
480 printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head,
481 info->xmit_tail, info->xmit_fifo_room);
482#endif
483}
484
485/*
486 * Called when a serial port signals it has read data in it's RX FIFO.
487 * It checks what interrupts are pending and services them, including
488 * receiving serial data.
489 */
490static void rp_handle_port(struct r_port *info)
491{
492 CHANNEL_t *cp;
493 unsigned int IntMask, ChanStatus;
494
495 if (!info)
496 return;
497
498 if (!tty_port_initialized(&info->port)) {
499 printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
500 "info->flags & NOT_INIT\n");
501 return;
502 }
503
504 cp = &info->channel;
505
506 IntMask = sGetChanIntID(cp) & info->intmask;
507#ifdef ROCKET_DEBUG_INTR
508 printk(KERN_INFO "rp_interrupt %02x...\n", IntMask);
509#endif
510 ChanStatus = sGetChanStatus(cp);
511 if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */
512 rp_do_receive(info, cp, ChanStatus);
513 }
514 if (IntMask & DELTA_CD) { /* CD change */
515#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
516 printk(KERN_INFO "ttyR%d CD now %s...\n", info->line,
517 (ChanStatus & CD_ACT) ? "on" : "off");
518#endif
519 if (!(ChanStatus & CD_ACT) && info->cd_status) {
520#ifdef ROCKET_DEBUG_HANGUP
521 printk(KERN_INFO "CD drop, calling hangup.\n");
522#endif
523 tty_port_tty_hangup(&info->port, false);
524 }
525 info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
526 wake_up_interruptible(&info->port.open_wait);
527 }
528#ifdef ROCKET_DEBUG_INTR
529 if (IntMask & DELTA_CTS) { /* CTS change */
530 printk(KERN_INFO "CTS change...\n");
531 }
532 if (IntMask & DELTA_DSR) { /* DSR change */
533 printk(KERN_INFO "DSR change...\n");
534 }
535#endif
536}
537
538/*
539 * The top level polling routine. Repeats every 1/100 HZ (10ms).
540 */
541static void rp_do_poll(unsigned long dummy)
542{
543 CONTROLLER_t *ctlp;
544 int ctrl, aiop, ch, line;
545 unsigned int xmitmask, i;
546 unsigned int CtlMask;
547 unsigned char AiopMask;
548 Word_t bit;
549
550 /* Walk through all the boards (ctrl's) */
551 for (ctrl = 0; ctrl < max_board; ctrl++) {
552 if (rcktpt_io_addr[ctrl] <= 0)
553 continue;
554
555 /* Get a ptr to the board's control struct */
556 ctlp = sCtlNumToCtlPtr(ctrl);
557
558 /* Get the interrupt status from the board */
559#ifdef CONFIG_PCI
560 if (ctlp->BusType == isPCI)
561 CtlMask = sPCIGetControllerIntStatus(ctlp);
562 else
563#endif
564 CtlMask = sGetControllerIntStatus(ctlp);
565
566 /* Check if any AIOP read bits are set */
567 for (aiop = 0; CtlMask; aiop++) {
568 bit = ctlp->AiopIntrBits[aiop];
569 if (CtlMask & bit) {
570 CtlMask &= ~bit;
571 AiopMask = sGetAiopIntStatus(ctlp, aiop);
572
573 /* Check if any port read bits are set */
574 for (ch = 0; AiopMask; AiopMask >>= 1, ch++) {
575 if (AiopMask & 1) {
576
577 /* Get the line number (/dev/ttyRx number). */
578 /* Read the data from the port. */
579 line = GetLineNumber(ctrl, aiop, ch);
580 rp_handle_port(rp_table[line]);
581 }
582 }
583 }
584 }
585
586 xmitmask = xmit_flags[ctrl];
587
588 /*
589 * xmit_flags contains bit-significant flags, indicating there is data
590 * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
591 * 1, ... (32 total possible). The variable i has the aiop and ch
592 * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
593 */
594 if (xmitmask) {
595 for (i = 0; i < rocketModel[ctrl].numPorts; i++) {
596 if (xmitmask & (1 << i)) {
597 aiop = (i & 0x18) >> 3;
598 ch = i & 0x07;
599 line = GetLineNumber(ctrl, aiop, ch);
600 rp_do_transmit(rp_table[line]);
601 }
602 }
603 }
604 }
605
606 /*
607 * Reset the timer so we get called at the next clock tick (10ms).
608 */
609 if (atomic_read(&rp_num_ports_open))
610 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
611}
612
613/*
614 * Initializes the r_port structure for a port, as well as enabling the port on
615 * the board.
616 * Inputs: board, aiop, chan numbers
617 */
618static void __init
619init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
620{
621 unsigned rocketMode;
622 struct r_port *info;
623 int line;
624 CONTROLLER_T *ctlp;
625
626 /* Get the next available line number */
627 line = SetLineNumber(board, aiop, chan);
628
629 ctlp = sCtlNumToCtlPtr(board);
630
631 /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */
632 info = kzalloc(sizeof (struct r_port), GFP_KERNEL);
633 if (!info) {
634 printk(KERN_ERR "Couldn't allocate info struct for line #%d\n",
635 line);
636 return;
637 }
638
639 info->magic = RPORT_MAGIC;
640 info->line = line;
641 info->ctlp = ctlp;
642 info->board = board;
643 info->aiop = aiop;
644 info->chan = chan;
645 tty_port_init(&info->port);
646 info->port.ops = &rocket_port_ops;
647 info->flags &= ~ROCKET_MODE_MASK;
648 switch (pc104[board][line]) {
649 case 422:
650 info->flags |= ROCKET_MODE_RS422;
651 break;
652 case 485:
653 info->flags |= ROCKET_MODE_RS485;
654 break;
655 case 232:
656 default:
657 info->flags |= ROCKET_MODE_RS232;
658 break;
659 }
660
661 info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
662 if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
663 printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n",
664 board, aiop, chan);
665 tty_port_destroy(&info->port);
666 kfree(info);
667 return;
668 }
669
670 rocketMode = info->flags & ROCKET_MODE_MASK;
671
672 if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485))
673 sEnRTSToggle(&info->channel);
674 else
675 sDisRTSToggle(&info->channel);
676
677 if (ctlp->boardType == ROCKET_TYPE_PC104) {
678 switch (rocketMode) {
679 case ROCKET_MODE_RS485:
680 sSetInterfaceMode(&info->channel, InterfaceModeRS485);
681 break;
682 case ROCKET_MODE_RS422:
683 sSetInterfaceMode(&info->channel, InterfaceModeRS422);
684 break;
685 case ROCKET_MODE_RS232:
686 default:
687 if (info->flags & ROCKET_RTS_TOGGLE)
688 sSetInterfaceMode(&info->channel, InterfaceModeRS232T);
689 else
690 sSetInterfaceMode(&info->channel, InterfaceModeRS232);
691 break;
692 }
693 }
694 spin_lock_init(&info->slock);
695 mutex_init(&info->write_mtx);
696 rp_table[line] = info;
697 tty_port_register_device(&info->port, rocket_driver, line,
698 pci_dev ? &pci_dev->dev : NULL);
699}
700
701/*
702 * Configures a rocketport port according to its termio settings. Called from
703 * user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
704 */
705static void configure_r_port(struct tty_struct *tty, struct r_port *info,
706 struct ktermios *old_termios)
707{
708 unsigned cflag;
709 unsigned long flags;
710 unsigned rocketMode;
711 int bits, baud, divisor;
712 CHANNEL_t *cp;
713 struct ktermios *t = &tty->termios;
714
715 cp = &info->channel;
716 cflag = t->c_cflag;
717
718 /* Byte size and parity */
719 if ((cflag & CSIZE) == CS8) {
720 sSetData8(cp);
721 bits = 10;
722 } else {
723 sSetData7(cp);
724 bits = 9;
725 }
726 if (cflag & CSTOPB) {
727 sSetStop2(cp);
728 bits++;
729 } else {
730 sSetStop1(cp);
731 }
732
733 if (cflag & PARENB) {
734 sEnParity(cp);
735 bits++;
736 if (cflag & PARODD) {
737 sSetOddParity(cp);
738 } else {
739 sSetEvenParity(cp);
740 }
741 } else {
742 sDisParity(cp);
743 }
744
745 /* baud rate */
746 baud = tty_get_baud_rate(tty);
747 if (!baud)
748 baud = 9600;
749 divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
750 if ((divisor >= 8192 || divisor < 0) && old_termios) {
751 baud = tty_termios_baud_rate(old_termios);
752 if (!baud)
753 baud = 9600;
754 divisor = (rp_baud_base[info->board] / baud) - 1;
755 }
756 if (divisor >= 8192 || divisor < 0) {
757 baud = 9600;
758 divisor = (rp_baud_base[info->board] / baud) - 1;
759 }
760 info->cps = baud / bits;
761 sSetBaud(cp, divisor);
762
763 /* FIXME: Should really back compute a baud rate from the divisor */
764 tty_encode_baud_rate(tty, baud, baud);
765
766 if (cflag & CRTSCTS) {
767 info->intmask |= DELTA_CTS;
768 sEnCTSFlowCtl(cp);
769 } else {
770 info->intmask &= ~DELTA_CTS;
771 sDisCTSFlowCtl(cp);
772 }
773 if (cflag & CLOCAL) {
774 info->intmask &= ~DELTA_CD;
775 } else {
776 spin_lock_irqsave(&info->slock, flags);
777 if (sGetChanStatus(cp) & CD_ACT)
778 info->cd_status = 1;
779 else
780 info->cd_status = 0;
781 info->intmask |= DELTA_CD;
782 spin_unlock_irqrestore(&info->slock, flags);
783 }
784
785 /*
786 * Handle software flow control in the board
787 */
788#ifdef ROCKET_SOFT_FLOW
789 if (I_IXON(tty)) {
790 sEnTxSoftFlowCtl(cp);
791 if (I_IXANY(tty)) {
792 sEnIXANY(cp);
793 } else {
794 sDisIXANY(cp);
795 }
796 sSetTxXONChar(cp, START_CHAR(tty));
797 sSetTxXOFFChar(cp, STOP_CHAR(tty));
798 } else {
799 sDisTxSoftFlowCtl(cp);
800 sDisIXANY(cp);
801 sClrTxXOFF(cp);
802 }
803#endif
804
805 /*
806 * Set up ignore/read mask words
807 */
808 info->read_status_mask = STMRCVROVRH | 0xFF;
809 if (I_INPCK(tty))
810 info->read_status_mask |= STMFRAMEH | STMPARITYH;
811 if (I_BRKINT(tty) || I_PARMRK(tty))
812 info->read_status_mask |= STMBREAKH;
813
814 /*
815 * Characters to ignore
816 */
817 info->ignore_status_mask = 0;
818 if (I_IGNPAR(tty))
819 info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
820 if (I_IGNBRK(tty)) {
821 info->ignore_status_mask |= STMBREAKH;
822 /*
823 * If we're ignoring parity and break indicators,
824 * ignore overruns too. (For real raw support).
825 */
826 if (I_IGNPAR(tty))
827 info->ignore_status_mask |= STMRCVROVRH;
828 }
829
830 rocketMode = info->flags & ROCKET_MODE_MASK;
831
832 if ((info->flags & ROCKET_RTS_TOGGLE)
833 || (rocketMode == ROCKET_MODE_RS485))
834 sEnRTSToggle(cp);
835 else
836 sDisRTSToggle(cp);
837
838 sSetRTS(&info->channel);
839
840 if (cp->CtlP->boardType == ROCKET_TYPE_PC104) {
841 switch (rocketMode) {
842 case ROCKET_MODE_RS485:
843 sSetInterfaceMode(cp, InterfaceModeRS485);
844 break;
845 case ROCKET_MODE_RS422:
846 sSetInterfaceMode(cp, InterfaceModeRS422);
847 break;
848 case ROCKET_MODE_RS232:
849 default:
850 if (info->flags & ROCKET_RTS_TOGGLE)
851 sSetInterfaceMode(cp, InterfaceModeRS232T);
852 else
853 sSetInterfaceMode(cp, InterfaceModeRS232);
854 break;
855 }
856 }
857}
858
859static int carrier_raised(struct tty_port *port)
860{
861 struct r_port *info = container_of(port, struct r_port, port);
862 return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
863}
864
865static void dtr_rts(struct tty_port *port, int on)
866{
867 struct r_port *info = container_of(port, struct r_port, port);
868 if (on) {
869 sSetDTR(&info->channel);
870 sSetRTS(&info->channel);
871 } else {
872 sClrDTR(&info->channel);
873 sClrRTS(&info->channel);
874 }
875}
876
877/*
878 * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
879 * port's r_port struct. Initializes the port hardware.
880 */
881static int rp_open(struct tty_struct *tty, struct file *filp)
882{
883 struct r_port *info;
884 struct tty_port *port;
885 int retval;
886 CHANNEL_t *cp;
887 unsigned long page;
888
889 info = rp_table[tty->index];
890 if (info == NULL)
891 return -ENXIO;
892 port = &info->port;
893
894 page = __get_free_page(GFP_KERNEL);
895 if (!page)
896 return -ENOMEM;
897
898 /*
899 * We must not sleep from here until the port is marked fully in use.
900 */
901 if (info->xmit_buf)
902 free_page(page);
903 else
904 info->xmit_buf = (unsigned char *) page;
905
906 tty->driver_data = info;
907 tty_port_tty_set(port, tty);
908
909 if (port->count++ == 0) {
910 atomic_inc(&rp_num_ports_open);
911
912#ifdef ROCKET_DEBUG_OPEN
913 printk(KERN_INFO "rocket mod++ = %d...\n",
914 atomic_read(&rp_num_ports_open));
915#endif
916 }
917#ifdef ROCKET_DEBUG_OPEN
918 printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count);
919#endif
920
921 /*
922 * Info->count is now 1; so it's safe to sleep now.
923 */
924 if (!tty_port_initialized(port)) {
925 cp = &info->channel;
926 sSetRxTrigger(cp, TRIG_1);
927 if (sGetChanStatus(cp) & CD_ACT)
928 info->cd_status = 1;
929 else
930 info->cd_status = 0;
931 sDisRxStatusMode(cp);
932 sFlushRxFIFO(cp);
933 sFlushTxFIFO(cp);
934
935 sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
936 sSetRxTrigger(cp, TRIG_1);
937
938 sGetChanStatus(cp);
939 sDisRxStatusMode(cp);
940 sClrTxXOFF(cp);
941
942 sDisCTSFlowCtl(cp);
943 sDisTxSoftFlowCtl(cp);
944
945 sEnRxFIFO(cp);
946 sEnTransmit(cp);
947
948 tty_port_set_initialized(&info->port, 1);
949
950 /*
951 * Set up the tty->alt_speed kludge
952 */
953 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
954 tty->alt_speed = 57600;
955 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
956 tty->alt_speed = 115200;
957 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
958 tty->alt_speed = 230400;
959 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
960 tty->alt_speed = 460800;
961
962 configure_r_port(tty, info, NULL);
963 if (C_BAUD(tty)) {
964 sSetDTR(cp);
965 sSetRTS(cp);
966 }
967 }
968 /* Starts (or resets) the maint polling loop */
969 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
970
971 retval = tty_port_block_til_ready(port, tty, filp);
972 if (retval) {
973#ifdef ROCKET_DEBUG_OPEN
974 printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval);
975#endif
976 return retval;
977 }
978 return 0;
979}
980
981/*
982 * Exception handler that closes a serial port. info->port.count is considered critical.
983 */
984static void rp_close(struct tty_struct *tty, struct file *filp)
985{
986 struct r_port *info = tty->driver_data;
987 struct tty_port *port = &info->port;
988 int timeout;
989 CHANNEL_t *cp;
990
991 if (rocket_paranoia_check(info, "rp_close"))
992 return;
993
994#ifdef ROCKET_DEBUG_OPEN
995 printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count);
996#endif
997
998 if (tty_port_close_start(port, tty, filp) == 0)
999 return;
1000
1001 mutex_lock(&port->mutex);
1002 cp = &info->channel;
1003 /*
1004 * Before we drop DTR, make sure the UART transmitter
1005 * has completely drained; this is especially
1006 * important if there is a transmit FIFO!
1007 */
1008 timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps;
1009 if (timeout == 0)
1010 timeout = 1;
1011 rp_wait_until_sent(tty, timeout);
1012 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1013
1014 sDisTransmit(cp);
1015 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1016 sDisCTSFlowCtl(cp);
1017 sDisTxSoftFlowCtl(cp);
1018 sClrTxXOFF(cp);
1019 sFlushRxFIFO(cp);
1020 sFlushTxFIFO(cp);
1021 sClrRTS(cp);
1022 if (C_HUPCL(tty))
1023 sClrDTR(cp);
1024
1025 rp_flush_buffer(tty);
1026
1027 tty_ldisc_flush(tty);
1028
1029 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1030
1031 /* We can't yet use tty_port_close_end as the buffer handling in this
1032 driver is a bit different to the usual */
1033
1034 if (port->blocked_open) {
1035 if (port->close_delay) {
1036 msleep_interruptible(jiffies_to_msecs(port->close_delay));
1037 }
1038 wake_up_interruptible(&port->open_wait);
1039 } else {
1040 if (info->xmit_buf) {
1041 free_page((unsigned long) info->xmit_buf);
1042 info->xmit_buf = NULL;
1043 }
1044 }
1045 spin_lock_irq(&port->lock);
1046 tty->closing = 0;
1047 spin_unlock_irq(&port->lock);
1048 tty_port_set_initialized(port, 0);
1049 tty_port_set_active(port, 0);
1050 mutex_unlock(&port->mutex);
1051 tty_port_tty_set(port, NULL);
1052
1053 atomic_dec(&rp_num_ports_open);
1054
1055#ifdef ROCKET_DEBUG_OPEN
1056 printk(KERN_INFO "rocket mod-- = %d...\n",
1057 atomic_read(&rp_num_ports_open));
1058 printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line);
1059#endif
1060
1061}
1062
1063static void rp_set_termios(struct tty_struct *tty,
1064 struct ktermios *old_termios)
1065{
1066 struct r_port *info = tty->driver_data;
1067 CHANNEL_t *cp;
1068 unsigned cflag;
1069
1070 if (rocket_paranoia_check(info, "rp_set_termios"))
1071 return;
1072
1073 cflag = tty->termios.c_cflag;
1074
1075 /*
1076 * This driver doesn't support CS5 or CS6
1077 */
1078 if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
1079 tty->termios.c_cflag =
1080 ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
1081 /* Or CMSPAR */
1082 tty->termios.c_cflag &= ~CMSPAR;
1083
1084 configure_r_port(tty, info, old_termios);
1085
1086 cp = &info->channel;
1087
1088 /* Handle transition to B0 status */
1089 if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
1090 sClrDTR(cp);
1091 sClrRTS(cp);
1092 }
1093
1094 /* Handle transition away from B0 status */
1095 if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
1096 sSetRTS(cp);
1097 sSetDTR(cp);
1098 }
1099
1100 if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty))
1101 rp_start(tty);
1102}
1103
1104static int rp_break(struct tty_struct *tty, int break_state)
1105{
1106 struct r_port *info = tty->driver_data;
1107 unsigned long flags;
1108
1109 if (rocket_paranoia_check(info, "rp_break"))
1110 return -EINVAL;
1111
1112 spin_lock_irqsave(&info->slock, flags);
1113 if (break_state == -1)
1114 sSendBreak(&info->channel);
1115 else
1116 sClrBreak(&info->channel);
1117 spin_unlock_irqrestore(&info->slock, flags);
1118 return 0;
1119}
1120
1121/*
1122 * sGetChanRI used to be a macro in rocket_int.h. When the functionality for
1123 * the UPCI boards was added, it was decided to make this a function because
1124 * the macro was getting too complicated. All cases except the first one
1125 * (UPCIRingInd) are taken directly from the original macro.
1126 */
1127static int sGetChanRI(CHANNEL_T * ChP)
1128{
1129 CONTROLLER_t *CtlP = ChP->CtlP;
1130 int ChanNum = ChP->ChanNum;
1131 int RingInd = 0;
1132
1133 if (CtlP->UPCIRingInd)
1134 RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]);
1135 else if (CtlP->AltChanRingIndicator)
1136 RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT;
1137 else if (CtlP->boardType == ROCKET_TYPE_PC104)
1138 RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]);
1139
1140 return RingInd;
1141}
1142
1143/********************************************************************************************/
1144/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */
1145
1146/*
1147 * Returns the state of the serial modem control lines. These next 2 functions
1148 * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
1149 */
1150static int rp_tiocmget(struct tty_struct *tty)
1151{
1152 struct r_port *info = tty->driver_data;
1153 unsigned int control, result, ChanStatus;
1154
1155 ChanStatus = sGetChanStatusLo(&info->channel);
1156 control = info->channel.TxControl[3];
1157 result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
1158 ((control & SET_DTR) ? TIOCM_DTR : 0) |
1159 ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
1160 (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
1161 ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) |
1162 ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0);
1163
1164 return result;
1165}
1166
1167/*
1168 * Sets the modem control lines
1169 */
1170static int rp_tiocmset(struct tty_struct *tty,
1171 unsigned int set, unsigned int clear)
1172{
1173 struct r_port *info = tty->driver_data;
1174
1175 if (set & TIOCM_RTS)
1176 info->channel.TxControl[3] |= SET_RTS;
1177 if (set & TIOCM_DTR)
1178 info->channel.TxControl[3] |= SET_DTR;
1179 if (clear & TIOCM_RTS)
1180 info->channel.TxControl[3] &= ~SET_RTS;
1181 if (clear & TIOCM_DTR)
1182 info->channel.TxControl[3] &= ~SET_DTR;
1183
1184 out32(info->channel.IndexAddr, info->channel.TxControl);
1185 return 0;
1186}
1187
1188static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
1189{
1190 struct rocket_config tmp;
1191
1192 memset(&tmp, 0, sizeof (tmp));
1193 mutex_lock(&info->port.mutex);
1194 tmp.line = info->line;
1195 tmp.flags = info->flags;
1196 tmp.close_delay = info->port.close_delay;
1197 tmp.closing_wait = info->port.closing_wait;
1198 tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
1199 mutex_unlock(&info->port.mutex);
1200
1201 if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
1202 return -EFAULT;
1203 return 0;
1204}
1205
1206static int set_config(struct tty_struct *tty, struct r_port *info,
1207 struct rocket_config __user *new_info)
1208{
1209 struct rocket_config new_serial;
1210
1211 if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
1212 return -EFAULT;
1213
1214 mutex_lock(&info->port.mutex);
1215 if (!capable(CAP_SYS_ADMIN))
1216 {
1217 if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
1218 mutex_unlock(&info->port.mutex);
1219 return -EPERM;
1220 }
1221 info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
1222 configure_r_port(tty, info, NULL);
1223 mutex_unlock(&info->port.mutex);
1224 return 0;
1225 }
1226
1227 info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
1228 info->port.close_delay = new_serial.close_delay;
1229 info->port.closing_wait = new_serial.closing_wait;
1230
1231 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
1232 tty->alt_speed = 57600;
1233 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
1234 tty->alt_speed = 115200;
1235 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
1236 tty->alt_speed = 230400;
1237 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
1238 tty->alt_speed = 460800;
1239 mutex_unlock(&info->port.mutex);
1240
1241 configure_r_port(tty, info, NULL);
1242 return 0;
1243}
1244
1245/*
1246 * This function fills in a rocket_ports struct with information
1247 * about what boards/ports are in the system. This info is passed
1248 * to user space. See setrocket.c where the info is used to create
1249 * the /dev/ttyRx ports.
1250 */
1251static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
1252{
1253 struct rocket_ports tmp;
1254 int board;
1255
1256 memset(&tmp, 0, sizeof (tmp));
1257 tmp.tty_major = rocket_driver->major;
1258
1259 for (board = 0; board < 4; board++) {
1260 tmp.rocketModel[board].model = rocketModel[board].model;
1261 strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString);
1262 tmp.rocketModel[board].numPorts = rocketModel[board].numPorts;
1263 tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
1264 tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber;
1265 }
1266 if (copy_to_user(retports, &tmp, sizeof (*retports)))
1267 return -EFAULT;
1268 return 0;
1269}
1270
1271static int reset_rm2(struct r_port *info, void __user *arg)
1272{
1273 int reset;
1274
1275 if (!capable(CAP_SYS_ADMIN))
1276 return -EPERM;
1277
1278 if (copy_from_user(&reset, arg, sizeof (int)))
1279 return -EFAULT;
1280 if (reset)
1281 reset = 1;
1282
1283 if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII &&
1284 rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII)
1285 return -EINVAL;
1286
1287 if (info->ctlp->BusType == isISA)
1288 sModemReset(info->ctlp, info->chan, reset);
1289 else
1290 sPCIModemReset(info->ctlp, info->chan, reset);
1291
1292 return 0;
1293}
1294
1295static int get_version(struct r_port *info, struct rocket_version __user *retvers)
1296{
1297 if (copy_to_user(retvers, &driver_version, sizeof (*retvers)))
1298 return -EFAULT;
1299 return 0;
1300}
1301
1302/* IOCTL call handler into the driver */
1303static int rp_ioctl(struct tty_struct *tty,
1304 unsigned int cmd, unsigned long arg)
1305{
1306 struct r_port *info = tty->driver_data;
1307 void __user *argp = (void __user *)arg;
1308 int ret = 0;
1309
1310 if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
1311 return -ENXIO;
1312
1313 switch (cmd) {
1314 case RCKP_GET_STRUCT:
1315 if (copy_to_user(argp, info, sizeof (struct r_port)))
1316 ret = -EFAULT;
1317 break;
1318 case RCKP_GET_CONFIG:
1319 ret = get_config(info, argp);
1320 break;
1321 case RCKP_SET_CONFIG:
1322 ret = set_config(tty, info, argp);
1323 break;
1324 case RCKP_GET_PORTS:
1325 ret = get_ports(info, argp);
1326 break;
1327 case RCKP_RESET_RM2:
1328 ret = reset_rm2(info, argp);
1329 break;
1330 case RCKP_GET_VERSION:
1331 ret = get_version(info, argp);
1332 break;
1333 default:
1334 ret = -ENOIOCTLCMD;
1335 }
1336 return ret;
1337}
1338
1339static void rp_send_xchar(struct tty_struct *tty, char ch)
1340{
1341 struct r_port *info = tty->driver_data;
1342 CHANNEL_t *cp;
1343
1344 if (rocket_paranoia_check(info, "rp_send_xchar"))
1345 return;
1346
1347 cp = &info->channel;
1348 if (sGetTxCnt(cp))
1349 sWriteTxPrioByte(cp, ch);
1350 else
1351 sWriteTxByte(sGetTxRxDataIO(cp), ch);
1352}
1353
1354static void rp_throttle(struct tty_struct *tty)
1355{
1356 struct r_port *info = tty->driver_data;
1357
1358#ifdef ROCKET_DEBUG_THROTTLE
1359 printk(KERN_INFO "throttle %s ....\n", tty->name);
1360#endif
1361
1362 if (rocket_paranoia_check(info, "rp_throttle"))
1363 return;
1364
1365 if (I_IXOFF(tty))
1366 rp_send_xchar(tty, STOP_CHAR(tty));
1367
1368 sClrRTS(&info->channel);
1369}
1370
1371static void rp_unthrottle(struct tty_struct *tty)
1372{
1373 struct r_port *info = tty->driver_data;
1374#ifdef ROCKET_DEBUG_THROTTLE
1375 printk(KERN_INFO "unthrottle %s ....\n", tty->name);
1376#endif
1377
1378 if (rocket_paranoia_check(info, "rp_unthrottle"))
1379 return;
1380
1381 if (I_IXOFF(tty))
1382 rp_send_xchar(tty, START_CHAR(tty));
1383
1384 sSetRTS(&info->channel);
1385}
1386
1387/*
1388 * ------------------------------------------------------------
1389 * rp_stop() and rp_start()
1390 *
1391 * This routines are called before setting or resetting tty->stopped.
1392 * They enable or disable transmitter interrupts, as necessary.
1393 * ------------------------------------------------------------
1394 */
1395static void rp_stop(struct tty_struct *tty)
1396{
1397 struct r_port *info = tty->driver_data;
1398
1399#ifdef ROCKET_DEBUG_FLOW
1400 printk(KERN_INFO "stop %s: %d %d....\n", tty->name,
1401 info->xmit_cnt, info->xmit_fifo_room);
1402#endif
1403
1404 if (rocket_paranoia_check(info, "rp_stop"))
1405 return;
1406
1407 if (sGetTxCnt(&info->channel))
1408 sDisTransmit(&info->channel);
1409}
1410
1411static void rp_start(struct tty_struct *tty)
1412{
1413 struct r_port *info = tty->driver_data;
1414
1415#ifdef ROCKET_DEBUG_FLOW
1416 printk(KERN_INFO "start %s: %d %d....\n", tty->name,
1417 info->xmit_cnt, info->xmit_fifo_room);
1418#endif
1419
1420 if (rocket_paranoia_check(info, "rp_stop"))
1421 return;
1422
1423 sEnTransmit(&info->channel);
1424 set_bit((info->aiop * 8) + info->chan,
1425 (void *) &xmit_flags[info->board]);
1426}
1427
1428/*
1429 * rp_wait_until_sent() --- wait until the transmitter is empty
1430 */
1431static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
1432{
1433 struct r_port *info = tty->driver_data;
1434 CHANNEL_t *cp;
1435 unsigned long orig_jiffies;
1436 int check_time, exit_time;
1437 int txcnt;
1438
1439 if (rocket_paranoia_check(info, "rp_wait_until_sent"))
1440 return;
1441
1442 cp = &info->channel;
1443
1444 orig_jiffies = jiffies;
1445#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1446 printk(KERN_INFO "In %s(%d) (jiff=%lu)...\n", __func__, timeout,
1447 jiffies);
1448 printk(KERN_INFO "cps=%d...\n", info->cps);
1449#endif
1450 while (1) {
1451 txcnt = sGetTxCnt(cp);
1452 if (!txcnt) {
1453 if (sGetChanStatusLo(cp) & TXSHRMT)
1454 break;
1455 check_time = (HZ / info->cps) / 5;
1456 } else {
1457 check_time = HZ * txcnt / info->cps;
1458 }
1459 if (timeout) {
1460 exit_time = orig_jiffies + timeout - jiffies;
1461 if (exit_time <= 0)
1462 break;
1463 if (exit_time < check_time)
1464 check_time = exit_time;
1465 }
1466 if (check_time == 0)
1467 check_time = 1;
1468#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1469 printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt,
1470 jiffies, check_time);
1471#endif
1472 msleep_interruptible(jiffies_to_msecs(check_time));
1473 if (signal_pending(current))
1474 break;
1475 }
1476 __set_current_state(TASK_RUNNING);
1477#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1478 printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
1479#endif
1480}
1481
1482/*
1483 * rp_hangup() --- called by tty_hangup() when a hangup is signaled.
1484 */
1485static void rp_hangup(struct tty_struct *tty)
1486{
1487 CHANNEL_t *cp;
1488 struct r_port *info = tty->driver_data;
1489 unsigned long flags;
1490
1491 if (rocket_paranoia_check(info, "rp_hangup"))
1492 return;
1493
1494#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP))
1495 printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
1496#endif
1497 rp_flush_buffer(tty);
1498 spin_lock_irqsave(&info->port.lock, flags);
1499 if (info->port.count)
1500 atomic_dec(&rp_num_ports_open);
1501 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1502 spin_unlock_irqrestore(&info->port.lock, flags);
1503
1504 tty_port_hangup(&info->port);
1505
1506 cp = &info->channel;
1507 sDisRxFIFO(cp);
1508 sDisTransmit(cp);
1509 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1510 sDisCTSFlowCtl(cp);
1511 sDisTxSoftFlowCtl(cp);
1512 sClrTxXOFF(cp);
1513 tty_port_set_initialized(&info->port, 0);
1514
1515 wake_up_interruptible(&info->port.open_wait);
1516}
1517
1518/*
1519 * Exception handler - write char routine. The RocketPort driver uses a
1520 * double-buffering strategy, with the twist that if the in-memory CPU
1521 * buffer is empty, and there's space in the transmit FIFO, the
1522 * writing routines will write directly to transmit FIFO.
1523 * Write buffer and counters protected by spinlocks
1524 */
1525static int rp_put_char(struct tty_struct *tty, unsigned char ch)
1526{
1527 struct r_port *info = tty->driver_data;
1528 CHANNEL_t *cp;
1529 unsigned long flags;
1530
1531 if (rocket_paranoia_check(info, "rp_put_char"))
1532 return 0;
1533
1534 /*
1535 * Grab the port write mutex, locking out other processes that try to
1536 * write to this port
1537 */
1538 mutex_lock(&info->write_mtx);
1539
1540#ifdef ROCKET_DEBUG_WRITE
1541 printk(KERN_INFO "rp_put_char %c...\n", ch);
1542#endif
1543
1544 spin_lock_irqsave(&info->slock, flags);
1545 cp = &info->channel;
1546
1547 if (!tty->stopped && info->xmit_fifo_room == 0)
1548 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1549
1550 if (tty->stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
1551 info->xmit_buf[info->xmit_head++] = ch;
1552 info->xmit_head &= XMIT_BUF_SIZE - 1;
1553 info->xmit_cnt++;
1554 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1555 } else {
1556 sOutB(sGetTxRxDataIO(cp), ch);
1557 info->xmit_fifo_room--;
1558 }
1559 spin_unlock_irqrestore(&info->slock, flags);
1560 mutex_unlock(&info->write_mtx);
1561 return 1;
1562}
1563
1564/*
1565 * Exception handler - write routine, called when user app writes to the device.
1566 * A per port write mutex is used to protect from another process writing to
1567 * this port at the same time. This other process could be running on the other CPU
1568 * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
1569 * Spinlocks protect the info xmit members.
1570 */
1571static int rp_write(struct tty_struct *tty,
1572 const unsigned char *buf, int count)
1573{
1574 struct r_port *info = tty->driver_data;
1575 CHANNEL_t *cp;
1576 const unsigned char *b;
1577 int c, retval = 0;
1578 unsigned long flags;
1579
1580 if (count <= 0 || rocket_paranoia_check(info, "rp_write"))
1581 return 0;
1582
1583 if (mutex_lock_interruptible(&info->write_mtx))
1584 return -ERESTARTSYS;
1585
1586#ifdef ROCKET_DEBUG_WRITE
1587 printk(KERN_INFO "rp_write %d chars...\n", count);
1588#endif
1589 cp = &info->channel;
1590
1591 if (!tty->stopped && info->xmit_fifo_room < count)
1592 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1593
1594 /*
1595 * If the write queue for the port is empty, and there is FIFO space, stuff bytes
1596 * into FIFO. Use the write queue for temp storage.
1597 */
1598 if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
1599 c = min(count, info->xmit_fifo_room);
1600 b = buf;
1601
1602 /* Push data into FIFO, 2 bytes at a time */
1603 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
1604
1605 /* If there is a byte remaining, write it */
1606 if (c & 1)
1607 sOutB(sGetTxRxDataIO(cp), b[c - 1]);
1608
1609 retval += c;
1610 buf += c;
1611 count -= c;
1612
1613 spin_lock_irqsave(&info->slock, flags);
1614 info->xmit_fifo_room -= c;
1615 spin_unlock_irqrestore(&info->slock, flags);
1616 }
1617
1618 /* If count is zero, we wrote it all and are done */
1619 if (!count)
1620 goto end;
1621
1622 /* Write remaining data into the port's xmit_buf */
1623 while (1) {
1624 /* Hung up ? */
1625 if (!tty_port_active(&info->port))
1626 goto end;
1627 c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
1628 c = min(c, XMIT_BUF_SIZE - info->xmit_head);
1629 if (c <= 0)
1630 break;
1631
1632 b = buf;
1633 memcpy(info->xmit_buf + info->xmit_head, b, c);
1634
1635 spin_lock_irqsave(&info->slock, flags);
1636 info->xmit_head =
1637 (info->xmit_head + c) & (XMIT_BUF_SIZE - 1);
1638 info->xmit_cnt += c;
1639 spin_unlock_irqrestore(&info->slock, flags);
1640
1641 buf += c;
1642 count -= c;
1643 retval += c;
1644 }
1645
1646 if ((retval > 0) && !tty->stopped)
1647 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1648
1649end:
1650 if (info->xmit_cnt < WAKEUP_CHARS) {
1651 tty_wakeup(tty);
1652#ifdef ROCKETPORT_HAVE_POLL_WAIT
1653 wake_up_interruptible(&tty->poll_wait);
1654#endif
1655 }
1656 mutex_unlock(&info->write_mtx);
1657 return retval;
1658}
1659
1660/*
1661 * Return the number of characters that can be sent. We estimate
1662 * only using the in-memory transmit buffer only, and ignore the
1663 * potential space in the transmit FIFO.
1664 */
1665static int rp_write_room(struct tty_struct *tty)
1666{
1667 struct r_port *info = tty->driver_data;
1668 int ret;
1669
1670 if (rocket_paranoia_check(info, "rp_write_room"))
1671 return 0;
1672
1673 ret = XMIT_BUF_SIZE - info->xmit_cnt - 1;
1674 if (ret < 0)
1675 ret = 0;
1676#ifdef ROCKET_DEBUG_WRITE
1677 printk(KERN_INFO "rp_write_room returns %d...\n", ret);
1678#endif
1679 return ret;
1680}
1681
1682/*
1683 * Return the number of characters in the buffer. Again, this only
1684 * counts those characters in the in-memory transmit buffer.
1685 */
1686static int rp_chars_in_buffer(struct tty_struct *tty)
1687{
1688 struct r_port *info = tty->driver_data;
1689
1690 if (rocket_paranoia_check(info, "rp_chars_in_buffer"))
1691 return 0;
1692
1693#ifdef ROCKET_DEBUG_WRITE
1694 printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt);
1695#endif
1696 return info->xmit_cnt;
1697}
1698
1699/*
1700 * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the
1701 * r_port struct for the port. Note that spinlock are used to protect info members,
1702 * do not call this function if the spinlock is already held.
1703 */
1704static void rp_flush_buffer(struct tty_struct *tty)
1705{
1706 struct r_port *info = tty->driver_data;
1707 CHANNEL_t *cp;
1708 unsigned long flags;
1709
1710 if (rocket_paranoia_check(info, "rp_flush_buffer"))
1711 return;
1712
1713 spin_lock_irqsave(&info->slock, flags);
1714 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1715 spin_unlock_irqrestore(&info->slock, flags);
1716
1717#ifdef ROCKETPORT_HAVE_POLL_WAIT
1718 wake_up_interruptible(&tty->poll_wait);
1719#endif
1720 tty_wakeup(tty);
1721
1722 cp = &info->channel;
1723 sFlushTxFIFO(cp);
1724}
1725
1726#ifdef CONFIG_PCI
1727
1728static const struct pci_device_id rocket_pci_ids[] = {
1729 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4QUAD) },
1730 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8OCTA) },
1731 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8OCTA) },
1732 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8INTF) },
1733 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8INTF) },
1734 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8J) },
1735 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4J) },
1736 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8SNI) },
1737 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16SNI) },
1738 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16INTF) },
1739 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP16INTF) },
1740 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_CRP16INTF) },
1741 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP32INTF) },
1742 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP32INTF) },
1743 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP4) },
1744 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP8) },
1745 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_232) },
1746 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_422) },
1747 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP6M) },
1748 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4M) },
1749 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_8PORT) },
1750 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_4PORT) },
1751 { }
1752};
1753MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
1754
1755/* Resets the speaker controller on RocketModem II and III devices */
1756static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
1757{
1758 ByteIO_t addr;
1759
1760 /* RocketModem II speaker control is at the 8th port location of offset 0x40 */
1761 if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
1762 addr = CtlP->AiopIO[0] + 0x4F;
1763 sOutB(addr, 0);
1764 }
1765
1766 /* RocketModem III speaker control is at the 1st port location of offset 0x80 */
1767 if ((model == MODEL_UPCI_RM3_8PORT)
1768 || (model == MODEL_UPCI_RM3_4PORT)) {
1769 addr = CtlP->AiopIO[0] + 0x88;
1770 sOutB(addr, 0);
1771 }
1772}
1773
1774/***************************************************************************
1775Function: sPCIInitController
1776Purpose: Initialization of controller global registers and controller
1777 structure.
1778Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
1779 IRQNum,Frequency,PeriodicOnly)
1780 CONTROLLER_T *CtlP; Ptr to controller structure
1781 int CtlNum; Controller number
1782 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
1783 This list must be in the order the AIOPs will be found on the
1784 controller. Once an AIOP in the list is not found, it is
1785 assumed that there are no more AIOPs on the controller.
1786 int AiopIOListSize; Number of addresses in AiopIOList
1787 int IRQNum; Interrupt Request number. Can be any of the following:
1788 0: Disable global interrupts
1789 3: IRQ 3
1790 4: IRQ 4
1791 5: IRQ 5
1792 9: IRQ 9
1793 10: IRQ 10
1794 11: IRQ 11
1795 12: IRQ 12
1796 15: IRQ 15
1797 Byte_t Frequency: A flag identifying the frequency
1798 of the periodic interrupt, can be any one of the following:
1799 FREQ_DIS - periodic interrupt disabled
1800 FREQ_137HZ - 137 Hertz
1801 FREQ_69HZ - 69 Hertz
1802 FREQ_34HZ - 34 Hertz
1803 FREQ_17HZ - 17 Hertz
1804 FREQ_9HZ - 9 Hertz
1805 FREQ_4HZ - 4 Hertz
1806 If IRQNum is set to 0 the Frequency parameter is
1807 overidden, it is forced to a value of FREQ_DIS.
1808 int PeriodicOnly: 1 if all interrupts except the periodic
1809 interrupt are to be blocked.
1810 0 is both the periodic interrupt and
1811 other channel interrupts are allowed.
1812 If IRQNum is set to 0 the PeriodicOnly parameter is
1813 overidden, it is forced to a value of 0.
1814Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
1815 initialization failed.
1816
1817Comments:
1818 If periodic interrupts are to be disabled but AIOP interrupts
1819 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
1820
1821 If interrupts are to be completely disabled set IRQNum to 0.
1822
1823 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
1824 invalid combination.
1825
1826 This function performs initialization of global interrupt modes,
1827 but it does not actually enable global interrupts. To enable
1828 and disable global interrupts use functions sEnGlobalInt() and
1829 sDisGlobalInt(). Enabling of global interrupts is normally not
1830 done until all other initializations are complete.
1831
1832 Even if interrupts are globally enabled, they must also be
1833 individually enabled for each channel that is to generate
1834 interrupts.
1835
1836Warnings: No range checking on any of the parameters is done.
1837
1838 No context switches are allowed while executing this function.
1839
1840 After this function all AIOPs on the controller are disabled,
1841 they can be enabled with sEnAiop().
1842*/
1843static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
1844 ByteIO_t * AiopIOList, int AiopIOListSize,
1845 WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
1846 int PeriodicOnly, int altChanRingIndicator,
1847 int UPCIRingInd)
1848{
1849 int i;
1850 ByteIO_t io;
1851
1852 CtlP->AltChanRingIndicator = altChanRingIndicator;
1853 CtlP->UPCIRingInd = UPCIRingInd;
1854 CtlP->CtlNum = CtlNum;
1855 CtlP->CtlID = CTLID_0001; /* controller release 1 */
1856 CtlP->BusType = isPCI; /* controller release 1 */
1857
1858 if (ConfigIO) {
1859 CtlP->isUPCI = 1;
1860 CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
1861 CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
1862 CtlP->AiopIntrBits = upci_aiop_intr_bits;
1863 } else {
1864 CtlP->isUPCI = 0;
1865 CtlP->PCIIO =
1866 (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
1867 CtlP->AiopIntrBits = aiop_intr_bits;
1868 }
1869
1870 sPCIControllerEOI(CtlP); /* clear EOI if warm init */
1871 /* Init AIOPs */
1872 CtlP->NumAiop = 0;
1873 for (i = 0; i < AiopIOListSize; i++) {
1874 io = AiopIOList[i];
1875 CtlP->AiopIO[i] = (WordIO_t) io;
1876 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
1877
1878 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
1879 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
1880 break; /* done looking for AIOPs */
1881
1882 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
1883 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
1884 sOutB(io + _INDX_DATA, sClockPrescale);
1885 CtlP->NumAiop++; /* bump count of AIOPs */
1886 }
1887
1888 if (CtlP->NumAiop == 0)
1889 return (-1);
1890 else
1891 return (CtlP->NumAiop);
1892}
1893
1894/*
1895 * Called when a PCI card is found. Retrieves and stores model information,
1896 * init's aiopic and serial port hardware.
1897 * Inputs: i is the board number (0-n)
1898 */
1899static __init int register_PCI(int i, struct pci_dev *dev)
1900{
1901 int num_aiops, aiop, max_num_aiops, num_chan, chan;
1902 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
1903 CONTROLLER_t *ctlp;
1904
1905 int fast_clock = 0;
1906 int altChanRingIndicator = 0;
1907 int ports_per_aiop = 8;
1908 WordIO_t ConfigIO = 0;
1909 ByteIO_t UPCIRingInd = 0;
1910
1911 if (!dev || !pci_match_id(rocket_pci_ids, dev) ||
1912 pci_enable_device(dev))
1913 return 0;
1914
1915 rcktpt_io_addr[i] = pci_resource_start(dev, 0);
1916
1917 rcktpt_type[i] = ROCKET_TYPE_NORMAL;
1918 rocketModel[i].loadrm2 = 0;
1919 rocketModel[i].startingPortNumber = nextLineNumber;
1920
1921 /* Depending on the model, set up some config variables */
1922 switch (dev->device) {
1923 case PCI_DEVICE_ID_RP4QUAD:
1924 max_num_aiops = 1;
1925 ports_per_aiop = 4;
1926 rocketModel[i].model = MODEL_RP4QUAD;
1927 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable");
1928 rocketModel[i].numPorts = 4;
1929 break;
1930 case PCI_DEVICE_ID_RP8OCTA:
1931 max_num_aiops = 1;
1932 rocketModel[i].model = MODEL_RP8OCTA;
1933 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable");
1934 rocketModel[i].numPorts = 8;
1935 break;
1936 case PCI_DEVICE_ID_URP8OCTA:
1937 max_num_aiops = 1;
1938 rocketModel[i].model = MODEL_UPCI_RP8OCTA;
1939 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable");
1940 rocketModel[i].numPorts = 8;
1941 break;
1942 case PCI_DEVICE_ID_RP8INTF:
1943 max_num_aiops = 1;
1944 rocketModel[i].model = MODEL_RP8INTF;
1945 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F");
1946 rocketModel[i].numPorts = 8;
1947 break;
1948 case PCI_DEVICE_ID_URP8INTF:
1949 max_num_aiops = 1;
1950 rocketModel[i].model = MODEL_UPCI_RP8INTF;
1951 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F");
1952 rocketModel[i].numPorts = 8;
1953 break;
1954 case PCI_DEVICE_ID_RP8J:
1955 max_num_aiops = 1;
1956 rocketModel[i].model = MODEL_RP8J;
1957 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors");
1958 rocketModel[i].numPorts = 8;
1959 break;
1960 case PCI_DEVICE_ID_RP4J:
1961 max_num_aiops = 1;
1962 ports_per_aiop = 4;
1963 rocketModel[i].model = MODEL_RP4J;
1964 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors");
1965 rocketModel[i].numPorts = 4;
1966 break;
1967 case PCI_DEVICE_ID_RP8SNI:
1968 max_num_aiops = 1;
1969 rocketModel[i].model = MODEL_RP8SNI;
1970 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78");
1971 rocketModel[i].numPorts = 8;
1972 break;
1973 case PCI_DEVICE_ID_RP16SNI:
1974 max_num_aiops = 2;
1975 rocketModel[i].model = MODEL_RP16SNI;
1976 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78");
1977 rocketModel[i].numPorts = 16;
1978 break;
1979 case PCI_DEVICE_ID_RP16INTF:
1980 max_num_aiops = 2;
1981 rocketModel[i].model = MODEL_RP16INTF;
1982 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F");
1983 rocketModel[i].numPorts = 16;
1984 break;
1985 case PCI_DEVICE_ID_URP16INTF:
1986 max_num_aiops = 2;
1987 rocketModel[i].model = MODEL_UPCI_RP16INTF;
1988 strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F");
1989 rocketModel[i].numPorts = 16;
1990 break;
1991 case PCI_DEVICE_ID_CRP16INTF:
1992 max_num_aiops = 2;
1993 rocketModel[i].model = MODEL_CPCI_RP16INTF;
1994 strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F");
1995 rocketModel[i].numPorts = 16;
1996 break;
1997 case PCI_DEVICE_ID_RP32INTF:
1998 max_num_aiops = 4;
1999 rocketModel[i].model = MODEL_RP32INTF;
2000 strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F");
2001 rocketModel[i].numPorts = 32;
2002 break;
2003 case PCI_DEVICE_ID_URP32INTF:
2004 max_num_aiops = 4;
2005 rocketModel[i].model = MODEL_UPCI_RP32INTF;
2006 strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F");
2007 rocketModel[i].numPorts = 32;
2008 break;
2009 case PCI_DEVICE_ID_RPP4:
2010 max_num_aiops = 1;
2011 ports_per_aiop = 4;
2012 altChanRingIndicator++;
2013 fast_clock++;
2014 rocketModel[i].model = MODEL_RPP4;
2015 strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port");
2016 rocketModel[i].numPorts = 4;
2017 break;
2018 case PCI_DEVICE_ID_RPP8:
2019 max_num_aiops = 2;
2020 ports_per_aiop = 4;
2021 altChanRingIndicator++;
2022 fast_clock++;
2023 rocketModel[i].model = MODEL_RPP8;
2024 strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port");
2025 rocketModel[i].numPorts = 8;
2026 break;
2027 case PCI_DEVICE_ID_RP2_232:
2028 max_num_aiops = 1;
2029 ports_per_aiop = 2;
2030 altChanRingIndicator++;
2031 fast_clock++;
2032 rocketModel[i].model = MODEL_RP2_232;
2033 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232");
2034 rocketModel[i].numPorts = 2;
2035 break;
2036 case PCI_DEVICE_ID_RP2_422:
2037 max_num_aiops = 1;
2038 ports_per_aiop = 2;
2039 altChanRingIndicator++;
2040 fast_clock++;
2041 rocketModel[i].model = MODEL_RP2_422;
2042 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422");
2043 rocketModel[i].numPorts = 2;
2044 break;
2045 case PCI_DEVICE_ID_RP6M:
2046
2047 max_num_aiops = 1;
2048 ports_per_aiop = 6;
2049
2050 /* If revision is 1, the rocketmodem flash must be loaded.
2051 * If it is 2 it is a "socketed" version. */
2052 if (dev->revision == 1) {
2053 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2054 rocketModel[i].loadrm2 = 1;
2055 } else {
2056 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2057 }
2058
2059 rocketModel[i].model = MODEL_RP6M;
2060 strcpy(rocketModel[i].modelString, "RocketModem 6 port");
2061 rocketModel[i].numPorts = 6;
2062 break;
2063 case PCI_DEVICE_ID_RP4M:
2064 max_num_aiops = 1;
2065 ports_per_aiop = 4;
2066 if (dev->revision == 1) {
2067 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2068 rocketModel[i].loadrm2 = 1;
2069 } else {
2070 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2071 }
2072
2073 rocketModel[i].model = MODEL_RP4M;
2074 strcpy(rocketModel[i].modelString, "RocketModem 4 port");
2075 rocketModel[i].numPorts = 4;
2076 break;
2077 default:
2078 max_num_aiops = 0;
2079 break;
2080 }
2081
2082 /*
2083 * Check for UPCI boards.
2084 */
2085
2086 switch (dev->device) {
2087 case PCI_DEVICE_ID_URP32INTF:
2088 case PCI_DEVICE_ID_URP8INTF:
2089 case PCI_DEVICE_ID_URP16INTF:
2090 case PCI_DEVICE_ID_CRP16INTF:
2091 case PCI_DEVICE_ID_URP8OCTA:
2092 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2093 ConfigIO = pci_resource_start(dev, 1);
2094 if (dev->device == PCI_DEVICE_ID_URP8OCTA) {
2095 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2096
2097 /*
2098 * Check for octa or quad cable.
2099 */
2100 if (!
2101 (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) &
2102 PCI_GPIO_CTRL_8PORT)) {
2103 ports_per_aiop = 4;
2104 rocketModel[i].numPorts = 4;
2105 }
2106 }
2107 break;
2108 case PCI_DEVICE_ID_UPCI_RM3_8PORT:
2109 max_num_aiops = 1;
2110 rocketModel[i].model = MODEL_UPCI_RM3_8PORT;
2111 strcpy(rocketModel[i].modelString, "RocketModem III 8 port");
2112 rocketModel[i].numPorts = 8;
2113 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2114 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2115 ConfigIO = pci_resource_start(dev, 1);
2116 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2117 break;
2118 case PCI_DEVICE_ID_UPCI_RM3_4PORT:
2119 max_num_aiops = 1;
2120 rocketModel[i].model = MODEL_UPCI_RM3_4PORT;
2121 strcpy(rocketModel[i].modelString, "RocketModem III 4 port");
2122 rocketModel[i].numPorts = 4;
2123 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2124 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2125 ConfigIO = pci_resource_start(dev, 1);
2126 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2127 break;
2128 default:
2129 break;
2130 }
2131
2132 if (fast_clock) {
2133 sClockPrescale = 0x12; /* mod 2 (divide by 3) */
2134 rp_baud_base[i] = 921600;
2135 } else {
2136 /*
2137 * If support_low_speed is set, use the slow clock
2138 * prescale, which supports 50 bps
2139 */
2140 if (support_low_speed) {
2141 /* mod 9 (divide by 10) prescale */
2142 sClockPrescale = 0x19;
2143 rp_baud_base[i] = 230400;
2144 } else {
2145 /* mod 4 (divide by 5) prescale */
2146 sClockPrescale = 0x14;
2147 rp_baud_base[i] = 460800;
2148 }
2149 }
2150
2151 for (aiop = 0; aiop < max_num_aiops; aiop++)
2152 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40);
2153 ctlp = sCtlNumToCtlPtr(i);
2154 num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd);
2155 for (aiop = 0; aiop < max_num_aiops; aiop++)
2156 ctlp->AiopNumChan[aiop] = ports_per_aiop;
2157
2158 dev_info(&dev->dev, "comtrol PCI controller #%d found at "
2159 "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n",
2160 i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString,
2161 rocketModel[i].startingPortNumber,
2162 rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1);
2163
2164 if (num_aiops <= 0) {
2165 rcktpt_io_addr[i] = 0;
2166 return (0);
2167 }
2168 is_PCI[i] = 1;
2169
2170 /* Reset the AIOPIC, init the serial ports */
2171 for (aiop = 0; aiop < num_aiops; aiop++) {
2172 sResetAiopByNum(ctlp, aiop);
2173 num_chan = ports_per_aiop;
2174 for (chan = 0; chan < num_chan; chan++)
2175 init_r_port(i, aiop, chan, dev);
2176 }
2177
2178 /* Rocket modems must be reset */
2179 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
2180 (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
2181 (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
2182 num_chan = ports_per_aiop;
2183 for (chan = 0; chan < num_chan; chan++)
2184 sPCIModemReset(ctlp, chan, 1);
2185 msleep(500);
2186 for (chan = 0; chan < num_chan; chan++)
2187 sPCIModemReset(ctlp, chan, 0);
2188 msleep(500);
2189 rmSpeakerReset(ctlp, rocketModel[i].model);
2190 }
2191 return (1);
2192}
2193
2194/*
2195 * Probes for PCI cards, inits them if found
2196 * Input: board_found = number of ISA boards already found, or the
2197 * starting board number
2198 * Returns: Number of PCI boards found
2199 */
2200static int __init init_PCI(int boards_found)
2201{
2202 struct pci_dev *dev = NULL;
2203 int count = 0;
2204
2205 /* Work through the PCI device list, pulling out ours */
2206 while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
2207 if (register_PCI(count + boards_found, dev))
2208 count++;
2209 }
2210 return (count);
2211}
2212
2213#endif /* CONFIG_PCI */
2214
2215/*
2216 * Probes for ISA cards
2217 * Input: i = the board number to look for
2218 * Returns: 1 if board found, 0 else
2219 */
2220static int __init init_ISA(int i)
2221{
2222 int num_aiops, num_chan = 0, total_num_chan = 0;
2223 int aiop, chan;
2224 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
2225 CONTROLLER_t *ctlp;
2226 char *type_string;
2227
2228 /* If io_addr is zero, no board configured */
2229 if (rcktpt_io_addr[i] == 0)
2230 return (0);
2231
2232 /* Reserve the IO region */
2233 if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
2234 printk(KERN_ERR "Unable to reserve IO region for configured "
2235 "ISA RocketPort at address 0x%lx, board not "
2236 "installed...\n", rcktpt_io_addr[i]);
2237 rcktpt_io_addr[i] = 0;
2238 return (0);
2239 }
2240
2241 ctlp = sCtlNumToCtlPtr(i);
2242
2243 ctlp->boardType = rcktpt_type[i];
2244
2245 switch (rcktpt_type[i]) {
2246 case ROCKET_TYPE_PC104:
2247 type_string = "(PC104)";
2248 break;
2249 case ROCKET_TYPE_MODEM:
2250 type_string = "(RocketModem)";
2251 break;
2252 case ROCKET_TYPE_MODEMII:
2253 type_string = "(RocketModem II)";
2254 break;
2255 default:
2256 type_string = "";
2257 break;
2258 }
2259
2260 /*
2261 * If support_low_speed is set, use the slow clock prescale,
2262 * which supports 50 bps
2263 */
2264 if (support_low_speed) {
2265 sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */
2266 rp_baud_base[i] = 230400;
2267 } else {
2268 sClockPrescale = 0x14; /* mod 4 (divide by 5) prescale */
2269 rp_baud_base[i] = 460800;
2270 }
2271
2272 for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
2273 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
2274
2275 num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
2276
2277 if (ctlp->boardType == ROCKET_TYPE_PC104) {
2278 sEnAiop(ctlp, 2); /* only one AIOPIC, but these */
2279 sEnAiop(ctlp, 3); /* CSels used for other stuff */
2280 }
2281
2282 /* If something went wrong initing the AIOP's release the ISA IO memory */
2283 if (num_aiops <= 0) {
2284 release_region(rcktpt_io_addr[i], 64);
2285 rcktpt_io_addr[i] = 0;
2286 return (0);
2287 }
2288
2289 rocketModel[i].startingPortNumber = nextLineNumber;
2290
2291 for (aiop = 0; aiop < num_aiops; aiop++) {
2292 sResetAiopByNum(ctlp, aiop);
2293 sEnAiop(ctlp, aiop);
2294 num_chan = sGetAiopNumChan(ctlp, aiop);
2295 total_num_chan += num_chan;
2296 for (chan = 0; chan < num_chan; chan++)
2297 init_r_port(i, aiop, chan, NULL);
2298 }
2299 is_PCI[i] = 0;
2300 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) {
2301 num_chan = sGetAiopNumChan(ctlp, 0);
2302 total_num_chan = num_chan;
2303 for (chan = 0; chan < num_chan; chan++)
2304 sModemReset(ctlp, chan, 1);
2305 msleep(500);
2306 for (chan = 0; chan < num_chan; chan++)
2307 sModemReset(ctlp, chan, 0);
2308 msleep(500);
2309 strcpy(rocketModel[i].modelString, "RocketModem ISA");
2310 } else {
2311 strcpy(rocketModel[i].modelString, "RocketPort ISA");
2312 }
2313 rocketModel[i].numPorts = total_num_chan;
2314 rocketModel[i].model = MODEL_ISA;
2315
2316 printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
2317 i, rcktpt_io_addr[i], num_aiops, type_string);
2318
2319 printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
2320 rocketModel[i].modelString,
2321 rocketModel[i].startingPortNumber,
2322 rocketModel[i].startingPortNumber +
2323 rocketModel[i].numPorts - 1);
2324
2325 return (1);
2326}
2327
2328static const struct tty_operations rocket_ops = {
2329 .open = rp_open,
2330 .close = rp_close,
2331 .write = rp_write,
2332 .put_char = rp_put_char,
2333 .write_room = rp_write_room,
2334 .chars_in_buffer = rp_chars_in_buffer,
2335 .flush_buffer = rp_flush_buffer,
2336 .ioctl = rp_ioctl,
2337 .throttle = rp_throttle,
2338 .unthrottle = rp_unthrottle,
2339 .set_termios = rp_set_termios,
2340 .stop = rp_stop,
2341 .start = rp_start,
2342 .hangup = rp_hangup,
2343 .break_ctl = rp_break,
2344 .send_xchar = rp_send_xchar,
2345 .wait_until_sent = rp_wait_until_sent,
2346 .tiocmget = rp_tiocmget,
2347 .tiocmset = rp_tiocmset,
2348};
2349
2350static const struct tty_port_operations rocket_port_ops = {
2351 .carrier_raised = carrier_raised,
2352 .dtr_rts = dtr_rts,
2353};
2354
2355/*
2356 * The module "startup" routine; it's run when the module is loaded.
2357 */
2358static int __init rp_init(void)
2359{
2360 int ret = -ENOMEM, pci_boards_found, isa_boards_found, i;
2361
2362 printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
2363 ROCKET_VERSION, ROCKET_DATE);
2364
2365 rocket_driver = alloc_tty_driver(MAX_RP_PORTS);
2366 if (!rocket_driver)
2367 goto err;
2368
2369 /*
2370 * If board 1 is non-zero, there is at least one ISA configured. If controller is
2371 * zero, use the default controller IO address of board1 + 0x40.
2372 */
2373 if (board1) {
2374 if (controller == 0)
2375 controller = board1 + 0x40;
2376 } else {
2377 controller = 0; /* Used as a flag, meaning no ISA boards */
2378 }
2379
2380 /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
2381 if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
2382 printk(KERN_ERR "Unable to reserve IO region for first "
2383 "configured ISA RocketPort controller 0x%lx. "
2384 "Driver exiting\n", controller);
2385 ret = -EBUSY;
2386 goto err_tty;
2387 }
2388
2389 /* Store ISA variable retrieved from command line or .conf file. */
2390 rcktpt_io_addr[0] = board1;
2391 rcktpt_io_addr[1] = board2;
2392 rcktpt_io_addr[2] = board3;
2393 rcktpt_io_addr[3] = board4;
2394
2395 rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2396 rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0];
2397 rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2398 rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1];
2399 rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2400 rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2];
2401 rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2402 rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3];
2403
2404 /*
2405 * Set up the tty driver structure and then register this
2406 * driver with the tty layer.
2407 */
2408
2409 rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV;
2410 rocket_driver->name = "ttyR";
2411 rocket_driver->driver_name = "Comtrol RocketPort";
2412 rocket_driver->major = TTY_ROCKET_MAJOR;
2413 rocket_driver->minor_start = 0;
2414 rocket_driver->type = TTY_DRIVER_TYPE_SERIAL;
2415 rocket_driver->subtype = SERIAL_TYPE_NORMAL;
2416 rocket_driver->init_termios = tty_std_termios;
2417 rocket_driver->init_termios.c_cflag =
2418 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2419 rocket_driver->init_termios.c_ispeed = 9600;
2420 rocket_driver->init_termios.c_ospeed = 9600;
2421#ifdef ROCKET_SOFT_FLOW
2422 rocket_driver->flags |= TTY_DRIVER_REAL_RAW;
2423#endif
2424 tty_set_operations(rocket_driver, &rocket_ops);
2425
2426 ret = tty_register_driver(rocket_driver);
2427 if (ret < 0) {
2428 printk(KERN_ERR "Couldn't install tty RocketPort driver\n");
2429 goto err_controller;
2430 }
2431
2432#ifdef ROCKET_DEBUG_OPEN
2433 printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major);
2434#endif
2435
2436 /*
2437 * OK, let's probe each of the controllers looking for boards. Any boards found
2438 * will be initialized here.
2439 */
2440 isa_boards_found = 0;
2441 pci_boards_found = 0;
2442
2443 for (i = 0; i < NUM_BOARDS; i++) {
2444 if (init_ISA(i))
2445 isa_boards_found++;
2446 }
2447
2448#ifdef CONFIG_PCI
2449 if (isa_boards_found < NUM_BOARDS)
2450 pci_boards_found = init_PCI(isa_boards_found);
2451#endif
2452
2453 max_board = pci_boards_found + isa_boards_found;
2454
2455 if (max_board == 0) {
2456 printk(KERN_ERR "No rocketport ports found; unloading driver\n");
2457 ret = -ENXIO;
2458 goto err_ttyu;
2459 }
2460
2461 return 0;
2462err_ttyu:
2463 tty_unregister_driver(rocket_driver);
2464err_controller:
2465 if (controller)
2466 release_region(controller, 4);
2467err_tty:
2468 put_tty_driver(rocket_driver);
2469err:
2470 return ret;
2471}
2472
2473
2474static void rp_cleanup_module(void)
2475{
2476 int retval;
2477 int i;
2478
2479 del_timer_sync(&rocket_timer);
2480
2481 retval = tty_unregister_driver(rocket_driver);
2482 if (retval)
2483 printk(KERN_ERR "Error %d while trying to unregister "
2484 "rocketport driver\n", -retval);
2485
2486 for (i = 0; i < MAX_RP_PORTS; i++)
2487 if (rp_table[i]) {
2488 tty_unregister_device(rocket_driver, i);
2489 tty_port_destroy(&rp_table[i]->port);
2490 kfree(rp_table[i]);
2491 }
2492
2493 put_tty_driver(rocket_driver);
2494
2495 for (i = 0; i < NUM_BOARDS; i++) {
2496 if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
2497 continue;
2498 release_region(rcktpt_io_addr[i], 64);
2499 }
2500 if (controller)
2501 release_region(controller, 4);
2502}
2503
2504/***************************************************************************
2505Function: sInitController
2506Purpose: Initialization of controller global registers and controller
2507 structure.
2508Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
2509 IRQNum,Frequency,PeriodicOnly)
2510 CONTROLLER_T *CtlP; Ptr to controller structure
2511 int CtlNum; Controller number
2512 ByteIO_t MudbacIO; Mudbac base I/O address.
2513 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2514 This list must be in the order the AIOPs will be found on the
2515 controller. Once an AIOP in the list is not found, it is
2516 assumed that there are no more AIOPs on the controller.
2517 int AiopIOListSize; Number of addresses in AiopIOList
2518 int IRQNum; Interrupt Request number. Can be any of the following:
2519 0: Disable global interrupts
2520 3: IRQ 3
2521 4: IRQ 4
2522 5: IRQ 5
2523 9: IRQ 9
2524 10: IRQ 10
2525 11: IRQ 11
2526 12: IRQ 12
2527 15: IRQ 15
2528 Byte_t Frequency: A flag identifying the frequency
2529 of the periodic interrupt, can be any one of the following:
2530 FREQ_DIS - periodic interrupt disabled
2531 FREQ_137HZ - 137 Hertz
2532 FREQ_69HZ - 69 Hertz
2533 FREQ_34HZ - 34 Hertz
2534 FREQ_17HZ - 17 Hertz
2535 FREQ_9HZ - 9 Hertz
2536 FREQ_4HZ - 4 Hertz
2537 If IRQNum is set to 0 the Frequency parameter is
2538 overidden, it is forced to a value of FREQ_DIS.
2539 int PeriodicOnly: 1 if all interrupts except the periodic
2540 interrupt are to be blocked.
2541 0 is both the periodic interrupt and
2542 other channel interrupts are allowed.
2543 If IRQNum is set to 0 the PeriodicOnly parameter is
2544 overidden, it is forced to a value of 0.
2545Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
2546 initialization failed.
2547
2548Comments:
2549 If periodic interrupts are to be disabled but AIOP interrupts
2550 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
2551
2552 If interrupts are to be completely disabled set IRQNum to 0.
2553
2554 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
2555 invalid combination.
2556
2557 This function performs initialization of global interrupt modes,
2558 but it does not actually enable global interrupts. To enable
2559 and disable global interrupts use functions sEnGlobalInt() and
2560 sDisGlobalInt(). Enabling of global interrupts is normally not
2561 done until all other initializations are complete.
2562
2563 Even if interrupts are globally enabled, they must also be
2564 individually enabled for each channel that is to generate
2565 interrupts.
2566
2567Warnings: No range checking on any of the parameters is done.
2568
2569 No context switches are allowed while executing this function.
2570
2571 After this function all AIOPs on the controller are disabled,
2572 they can be enabled with sEnAiop().
2573*/
2574static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
2575 ByteIO_t * AiopIOList, int AiopIOListSize,
2576 int IRQNum, Byte_t Frequency, int PeriodicOnly)
2577{
2578 int i;
2579 ByteIO_t io;
2580 int done;
2581
2582 CtlP->AiopIntrBits = aiop_intr_bits;
2583 CtlP->AltChanRingIndicator = 0;
2584 CtlP->CtlNum = CtlNum;
2585 CtlP->CtlID = CTLID_0001; /* controller release 1 */
2586 CtlP->BusType = isISA;
2587 CtlP->MBaseIO = MudbacIO;
2588 CtlP->MReg1IO = MudbacIO + 1;
2589 CtlP->MReg2IO = MudbacIO + 2;
2590 CtlP->MReg3IO = MudbacIO + 3;
2591#if 1
2592 CtlP->MReg2 = 0; /* interrupt disable */
2593 CtlP->MReg3 = 0; /* no periodic interrupts */
2594#else
2595 if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */
2596 CtlP->MReg2 = 0; /* interrupt disable */
2597 CtlP->MReg3 = 0; /* no periodic interrupts */
2598 } else {
2599 CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */
2600 CtlP->MReg3 = Frequency; /* set frequency */
2601 if (PeriodicOnly) { /* periodic interrupt only */
2602 CtlP->MReg3 |= PERIODIC_ONLY;
2603 }
2604 }
2605#endif
2606 sOutB(CtlP->MReg2IO, CtlP->MReg2);
2607 sOutB(CtlP->MReg3IO, CtlP->MReg3);
2608 sControllerEOI(CtlP); /* clear EOI if warm init */
2609 /* Init AIOPs */
2610 CtlP->NumAiop = 0;
2611 for (i = done = 0; i < AiopIOListSize; i++) {
2612 io = AiopIOList[i];
2613 CtlP->AiopIO[i] = (WordIO_t) io;
2614 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2615 sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */
2616 sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */
2617 if (done)
2618 continue;
2619 sEnAiop(CtlP, i); /* enable the AIOP */
2620 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
2621 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
2622 done = 1; /* done looking for AIOPs */
2623 else {
2624 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2625 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
2626 sOutB(io + _INDX_DATA, sClockPrescale);
2627 CtlP->NumAiop++; /* bump count of AIOPs */
2628 }
2629 sDisAiop(CtlP, i); /* disable AIOP */
2630 }
2631
2632 if (CtlP->NumAiop == 0)
2633 return (-1);
2634 else
2635 return (CtlP->NumAiop);
2636}
2637
2638/***************************************************************************
2639Function: sReadAiopID
2640Purpose: Read the AIOP idenfication number directly from an AIOP.
2641Call: sReadAiopID(io)
2642 ByteIO_t io: AIOP base I/O address
2643Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X
2644 is replace by an identifying number.
2645 Flag AIOPID_NULL if no valid AIOP is found
2646Warnings: No context switches are allowed while executing this function.
2647
2648*/
2649static int sReadAiopID(ByteIO_t io)
2650{
2651 Byte_t AiopID; /* ID byte from AIOP */
2652
2653 sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */
2654 sOutB(io + _CMD_REG, 0x0);
2655 AiopID = sInW(io + _CHN_STAT0) & 0x07;
2656 if (AiopID == 0x06)
2657 return (1);
2658 else /* AIOP does not exist */
2659 return (-1);
2660}
2661
2662/***************************************************************************
2663Function: sReadAiopNumChan
2664Purpose: Read the number of channels available in an AIOP directly from
2665 an AIOP.
2666Call: sReadAiopNumChan(io)
2667 WordIO_t io: AIOP base I/O address
2668Return: int: The number of channels available
2669Comments: The number of channels is determined by write/reads from identical
2670 offsets within the SRAM address spaces for channels 0 and 4.
2671 If the channel 4 space is mirrored to channel 0 it is a 4 channel
2672 AIOP, otherwise it is an 8 channel.
2673Warnings: No context switches are allowed while executing this function.
2674*/
2675static int sReadAiopNumChan(WordIO_t io)
2676{
2677 Word_t x;
2678 static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
2679
2680 /* write to chan 0 SRAM */
2681 out32((DWordIO_t) io + _INDX_ADDR, R);
2682 sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */
2683 x = sInW(io + _INDX_DATA);
2684 sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */
2685 if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */
2686 return (8);
2687 else
2688 return (4);
2689}
2690
2691/***************************************************************************
2692Function: sInitChan
2693Purpose: Initialization of a channel and channel structure
2694Call: sInitChan(CtlP,ChP,AiopNum,ChanNum)
2695 CONTROLLER_T *CtlP; Ptr to controller structure
2696 CHANNEL_T *ChP; Ptr to channel structure
2697 int AiopNum; AIOP number within controller
2698 int ChanNum; Channel number within AIOP
2699Return: int: 1 if initialization succeeded, 0 if it fails because channel
2700 number exceeds number of channels available in AIOP.
2701Comments: This function must be called before a channel can be used.
2702Warnings: No range checking on any of the parameters is done.
2703
2704 No context switches are allowed while executing this function.
2705*/
2706static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
2707 int ChanNum)
2708{
2709 int i;
2710 WordIO_t AiopIO;
2711 WordIO_t ChIOOff;
2712 Byte_t *ChR;
2713 Word_t ChOff;
2714 static Byte_t R[4];
2715 int brd9600;
2716
2717 if (ChanNum >= CtlP->AiopNumChan[AiopNum])
2718 return 0; /* exceeds num chans in AIOP */
2719
2720 /* Channel, AIOP, and controller identifiers */
2721 ChP->CtlP = CtlP;
2722 ChP->ChanID = CtlP->AiopID[AiopNum];
2723 ChP->AiopNum = AiopNum;
2724 ChP->ChanNum = ChanNum;
2725
2726 /* Global direct addresses */
2727 AiopIO = CtlP->AiopIO[AiopNum];
2728 ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG;
2729 ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN;
2730 ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK;
2731 ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR;
2732 ChP->IndexData = AiopIO + _INDX_DATA;
2733
2734 /* Channel direct addresses */
2735 ChIOOff = AiopIO + ChP->ChanNum * 2;
2736 ChP->TxRxData = ChIOOff + _TD0;
2737 ChP->ChanStat = ChIOOff + _CHN_STAT0;
2738 ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
2739 ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0;
2740
2741 /* Initialize the channel from the RData array */
2742 for (i = 0; i < RDATASIZE; i += 4) {
2743 R[0] = RData[i];
2744 R[1] = RData[i + 1] + 0x10 * ChanNum;
2745 R[2] = RData[i + 2];
2746 R[3] = RData[i + 3];
2747 out32(ChP->IndexAddr, R);
2748 }
2749
2750 ChR = ChP->R;
2751 for (i = 0; i < RREGDATASIZE; i += 4) {
2752 ChR[i] = RRegData[i];
2753 ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum;
2754 ChR[i + 2] = RRegData[i + 2];
2755 ChR[i + 3] = RRegData[i + 3];
2756 }
2757
2758 /* Indexed registers */
2759 ChOff = (Word_t) ChanNum *0x1000;
2760
2761 if (sClockPrescale == 0x14)
2762 brd9600 = 47;
2763 else
2764 brd9600 = 23;
2765
2766 ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD);
2767 ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
2768 ChP->BaudDiv[2] = (Byte_t) brd9600;
2769 ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
2770 out32(ChP->IndexAddr, ChP->BaudDiv);
2771
2772 ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
2773 ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
2774 ChP->TxControl[2] = 0;
2775 ChP->TxControl[3] = 0;
2776 out32(ChP->IndexAddr, ChP->TxControl);
2777
2778 ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
2779 ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
2780 ChP->RxControl[2] = 0;
2781 ChP->RxControl[3] = 0;
2782 out32(ChP->IndexAddr, ChP->RxControl);
2783
2784 ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
2785 ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
2786 ChP->TxEnables[2] = 0;
2787 ChP->TxEnables[3] = 0;
2788 out32(ChP->IndexAddr, ChP->TxEnables);
2789
2790 ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
2791 ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
2792 ChP->TxCompare[2] = 0;
2793 ChP->TxCompare[3] = 0;
2794 out32(ChP->IndexAddr, ChP->TxCompare);
2795
2796 ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
2797 ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
2798 ChP->TxReplace1[2] = 0;
2799 ChP->TxReplace1[3] = 0;
2800 out32(ChP->IndexAddr, ChP->TxReplace1);
2801
2802 ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
2803 ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
2804 ChP->TxReplace2[2] = 0;
2805 ChP->TxReplace2[3] = 0;
2806 out32(ChP->IndexAddr, ChP->TxReplace2);
2807
2808 ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
2809 ChP->TxFIFO = ChOff + _TX_FIFO;
2810
2811 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */
2812 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */
2813 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
2814 sOutW(ChP->IndexData, 0);
2815 ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
2816 ChP->RxFIFO = ChOff + _RX_FIFO;
2817
2818 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */
2819 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */
2820 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
2821 sOutW(ChP->IndexData, 0);
2822 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
2823 sOutW(ChP->IndexData, 0);
2824 ChP->TxPrioCnt = ChOff + _TXP_CNT;
2825 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt);
2826 sOutB(ChP->IndexData, 0);
2827 ChP->TxPrioPtr = ChOff + _TXP_PNTR;
2828 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr);
2829 sOutB(ChP->IndexData, 0);
2830 ChP->TxPrioBuf = ChOff + _TXP_BUF;
2831 sEnRxProcessor(ChP); /* start the Rx processor */
2832
2833 return 1;
2834}
2835
2836/***************************************************************************
2837Function: sStopRxProcessor
2838Purpose: Stop the receive processor from processing a channel.
2839Call: sStopRxProcessor(ChP)
2840 CHANNEL_T *ChP; Ptr to channel structure
2841
2842Comments: The receive processor can be started again with sStartRxProcessor().
2843 This function causes the receive processor to skip over the
2844 stopped channel. It does not stop it from processing other channels.
2845
2846Warnings: No context switches are allowed while executing this function.
2847
2848 Do not leave the receive processor stopped for more than one
2849 character time.
2850
2851 After calling this function a delay of 4 uS is required to ensure
2852 that the receive processor is no longer processing this channel.
2853*/
2854static void sStopRxProcessor(CHANNEL_T * ChP)
2855{
2856 Byte_t R[4];
2857
2858 R[0] = ChP->R[0];
2859 R[1] = ChP->R[1];
2860 R[2] = 0x0a;
2861 R[3] = ChP->R[3];
2862 out32(ChP->IndexAddr, R);
2863}
2864
2865/***************************************************************************
2866Function: sFlushRxFIFO
2867Purpose: Flush the Rx FIFO
2868Call: sFlushRxFIFO(ChP)
2869 CHANNEL_T *ChP; Ptr to channel structure
2870Return: void
2871Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
2872 while it is being flushed the receive processor is stopped
2873 and the transmitter is disabled. After these operations a
2874 4 uS delay is done before clearing the pointers to allow
2875 the receive processor to stop. These items are handled inside
2876 this function.
2877Warnings: No context switches are allowed while executing this function.
2878*/
2879static void sFlushRxFIFO(CHANNEL_T * ChP)
2880{
2881 int i;
2882 Byte_t Ch; /* channel number within AIOP */
2883 int RxFIFOEnabled; /* 1 if Rx FIFO enabled */
2884
2885 if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */
2886 return; /* don't need to flush */
2887
2888 RxFIFOEnabled = 0;
2889 if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */
2890 RxFIFOEnabled = 1;
2891 sDisRxFIFO(ChP); /* disable it */
2892 for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */
2893 sInB(ChP->IntChan); /* depends on bus i/o timing */
2894 }
2895 sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */
2896 Ch = (Byte_t) sGetChanNum(ChP);
2897 sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */
2898 sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */
2899 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
2900 sOutW(ChP->IndexData, 0);
2901 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
2902 sOutW(ChP->IndexData, 0);
2903 if (RxFIFOEnabled)
2904 sEnRxFIFO(ChP); /* enable Rx FIFO */
2905}
2906
2907/***************************************************************************
2908Function: sFlushTxFIFO
2909Purpose: Flush the Tx FIFO
2910Call: sFlushTxFIFO(ChP)
2911 CHANNEL_T *ChP; Ptr to channel structure
2912Return: void
2913Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
2914 while it is being flushed the receive processor is stopped
2915 and the transmitter is disabled. After these operations a
2916 4 uS delay is done before clearing the pointers to allow
2917 the receive processor to stop. These items are handled inside
2918 this function.
2919Warnings: No context switches are allowed while executing this function.
2920*/
2921static void sFlushTxFIFO(CHANNEL_T * ChP)
2922{
2923 int i;
2924 Byte_t Ch; /* channel number within AIOP */
2925 int TxEnabled; /* 1 if transmitter enabled */
2926
2927 if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */
2928 return; /* don't need to flush */
2929
2930 TxEnabled = 0;
2931 if (ChP->TxControl[3] & TX_ENABLE) {
2932 TxEnabled = 1;
2933 sDisTransmit(ChP); /* disable transmitter */
2934 }
2935 sStopRxProcessor(ChP); /* stop Rx processor */
2936 for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */
2937 sInB(ChP->IntChan); /* depends on bus i/o timing */
2938 Ch = (Byte_t) sGetChanNum(ChP);
2939 sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */
2940 sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */
2941 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
2942 sOutW(ChP->IndexData, 0);
2943 if (TxEnabled)
2944 sEnTransmit(ChP); /* enable transmitter */
2945 sStartRxProcessor(ChP); /* restart Rx processor */
2946}
2947
2948/***************************************************************************
2949Function: sWriteTxPrioByte
2950Purpose: Write a byte of priority transmit data to a channel
2951Call: sWriteTxPrioByte(ChP,Data)
2952 CHANNEL_T *ChP; Ptr to channel structure
2953 Byte_t Data; The transmit data byte
2954
2955Return: int: 1 if the bytes is successfully written, otherwise 0.
2956
2957Comments: The priority byte is transmitted before any data in the Tx FIFO.
2958
2959Warnings: No context switches are allowed while executing this function.
2960*/
2961static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
2962{
2963 Byte_t DWBuf[4]; /* buffer for double word writes */
2964 Word_t *WordPtr; /* must be far because Win SS != DS */
2965 register DWordIO_t IndexAddr;
2966
2967 if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */
2968 IndexAddr = ChP->IndexAddr;
2969 sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */
2970 if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */
2971 return (0); /* nothing sent */
2972
2973 WordPtr = (Word_t *) (&DWBuf[0]);
2974 *WordPtr = ChP->TxPrioBuf; /* data byte address */
2975
2976 DWBuf[2] = Data; /* data byte value */
2977 out32(IndexAddr, DWBuf); /* write it out */
2978
2979 *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */
2980
2981 DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */
2982 DWBuf[3] = 0; /* priority buffer pointer */
2983 out32(IndexAddr, DWBuf); /* write it out */
2984 } else { /* write it to Tx FIFO */
2985
2986 sWriteTxByte(sGetTxRxDataIO(ChP), Data);
2987 }
2988 return (1); /* 1 byte sent */
2989}
2990
2991/***************************************************************************
2992Function: sEnInterrupts
2993Purpose: Enable one or more interrupts for a channel
2994Call: sEnInterrupts(ChP,Flags)
2995 CHANNEL_T *ChP; Ptr to channel structure
2996 Word_t Flags: Interrupt enable flags, can be any combination
2997 of the following flags:
2998 TXINT_EN: Interrupt on Tx FIFO empty
2999 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
3000 sSetRxTrigger())
3001 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
3002 MCINT_EN: Interrupt on modem input change
3003 CHANINT_EN: Allow channel interrupt signal to the AIOP's
3004 Interrupt Channel Register.
3005Return: void
3006Comments: If an interrupt enable flag is set in Flags, that interrupt will be
3007 enabled. If an interrupt enable flag is not set in Flags, that
3008 interrupt will not be changed. Interrupts can be disabled with
3009 function sDisInterrupts().
3010
3011 This function sets the appropriate bit for the channel in the AIOP's
3012 Interrupt Mask Register if the CHANINT_EN flag is set. This allows
3013 this channel's bit to be set in the AIOP's Interrupt Channel Register.
3014
3015 Interrupts must also be globally enabled before channel interrupts
3016 will be passed on to the host. This is done with function
3017 sEnGlobalInt().
3018
3019 In some cases it may be desirable to disable interrupts globally but
3020 enable channel interrupts. This would allow the global interrupt
3021 status register to be used to determine which AIOPs need service.
3022*/
3023static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
3024{
3025 Byte_t Mask; /* Interrupt Mask Register */
3026
3027 ChP->RxControl[2] |=
3028 ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3029
3030 out32(ChP->IndexAddr, ChP->RxControl);
3031
3032 ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
3033
3034 out32(ChP->IndexAddr, ChP->TxControl);
3035
3036 if (Flags & CHANINT_EN) {
3037 Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
3038 sOutB(ChP->IntMask, Mask);
3039 }
3040}
3041
3042/***************************************************************************
3043Function: sDisInterrupts
3044Purpose: Disable one or more interrupts for a channel
3045Call: sDisInterrupts(ChP,Flags)
3046 CHANNEL_T *ChP; Ptr to channel structure
3047 Word_t Flags: Interrupt flags, can be any combination
3048 of the following flags:
3049 TXINT_EN: Interrupt on Tx FIFO empty
3050 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
3051 sSetRxTrigger())
3052 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
3053 MCINT_EN: Interrupt on modem input change
3054 CHANINT_EN: Disable channel interrupt signal to the
3055 AIOP's Interrupt Channel Register.
3056Return: void
3057Comments: If an interrupt flag is set in Flags, that interrupt will be
3058 disabled. If an interrupt flag is not set in Flags, that
3059 interrupt will not be changed. Interrupts can be enabled with
3060 function sEnInterrupts().
3061
3062 This function clears the appropriate bit for the channel in the AIOP's
3063 Interrupt Mask Register if the CHANINT_EN flag is set. This blocks
3064 this channel's bit from being set in the AIOP's Interrupt Channel
3065 Register.
3066*/
3067static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
3068{
3069 Byte_t Mask; /* Interrupt Mask Register */
3070
3071 ChP->RxControl[2] &=
3072 ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3073 out32(ChP->IndexAddr, ChP->RxControl);
3074 ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
3075 out32(ChP->IndexAddr, ChP->TxControl);
3076
3077 if (Flags & CHANINT_EN) {
3078 Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
3079 sOutB(ChP->IntMask, Mask);
3080 }
3081}
3082
3083static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode)
3084{
3085 sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum);
3086}
3087
3088/*
3089 * Not an official SSCI function, but how to reset RocketModems.
3090 * ISA bus version
3091 */
3092static void sModemReset(CONTROLLER_T * CtlP, int chan, int on)
3093{
3094 ByteIO_t addr;
3095 Byte_t val;
3096
3097 addr = CtlP->AiopIO[0] + 0x400;
3098 val = sInB(CtlP->MReg3IO);
3099 /* if AIOP[1] is not enabled, enable it */
3100 if ((val & 2) == 0) {
3101 val = sInB(CtlP->MReg2IO);
3102 sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03));
3103 sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6));
3104 }
3105
3106 sEnAiop(CtlP, 1);
3107 if (!on)
3108 addr += 8;
3109 sOutB(addr + chan, 0); /* apply or remove reset */
3110 sDisAiop(CtlP, 1);
3111}
3112
3113/*
3114 * Not an official SSCI function, but how to reset RocketModems.
3115 * PCI bus version
3116 */
3117static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
3118{
3119 ByteIO_t addr;
3120
3121 addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */
3122 if (!on)
3123 addr += 8;
3124 sOutB(addr + chan, 0); /* apply or remove reset */
3125}
3126
3127/* Returns the line number given the controller (board), aiop and channel number */
3128static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
3129{
3130 return lineNumbers[(ctrl << 5) | (aiop << 3) | ch];
3131}
3132
3133/*
3134 * Stores the line number associated with a given controller (board), aiop
3135 * and channel number.
3136 * Returns: The line number assigned
3137 */
3138static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
3139{
3140 lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++;
3141 return (nextLineNumber - 1);
3142}