Loading...
1/*
2 * Procedures for creating, accessing and interpreting the device tree.
3 *
4 * Paul Mackerras August 1996.
5 * Copyright (C) 1996-2005 Paul Mackerras.
6 *
7 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
8 * {engebret|bergner}@us.ibm.com
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 */
15
16#undef DEBUG
17
18#include <stdarg.h>
19#include <linux/kernel.h>
20#include <linux/string.h>
21#include <linux/init.h>
22#include <linux/threads.h>
23#include <linux/spinlock.h>
24#include <linux/types.h>
25#include <linux/pci.h>
26#include <linux/stringify.h>
27#include <linux/delay.h>
28#include <linux/initrd.h>
29#include <linux/bitops.h>
30#include <linux/export.h>
31#include <linux/kexec.h>
32#include <linux/irq.h>
33#include <linux/memblock.h>
34#include <linux/of.h>
35#include <linux/of_fdt.h>
36#include <linux/libfdt.h>
37#include <linux/cpu.h>
38
39#include <asm/prom.h>
40#include <asm/rtas.h>
41#include <asm/page.h>
42#include <asm/processor.h>
43#include <asm/irq.h>
44#include <asm/io.h>
45#include <asm/kdump.h>
46#include <asm/smp.h>
47#include <asm/mmu.h>
48#include <asm/paca.h>
49#include <asm/pgtable.h>
50#include <asm/powernv.h>
51#include <asm/iommu.h>
52#include <asm/btext.h>
53#include <asm/sections.h>
54#include <asm/machdep.h>
55#include <asm/pci-bridge.h>
56#include <asm/kexec.h>
57#include <asm/opal.h>
58#include <asm/fadump.h>
59#include <asm/epapr_hcalls.h>
60#include <asm/firmware.h>
61#include <asm/dt_cpu_ftrs.h>
62#include <asm/drmem.h>
63
64#include <mm/mmu_decl.h>
65
66#ifdef DEBUG
67#define DBG(fmt...) printk(KERN_ERR fmt)
68#else
69#define DBG(fmt...)
70#endif
71
72#ifdef CONFIG_PPC64
73int __initdata iommu_is_off;
74int __initdata iommu_force_on;
75unsigned long tce_alloc_start, tce_alloc_end;
76u64 ppc64_rma_size;
77#endif
78static phys_addr_t first_memblock_size;
79static int __initdata boot_cpu_count;
80
81static int __init early_parse_mem(char *p)
82{
83 if (!p)
84 return 1;
85
86 memory_limit = PAGE_ALIGN(memparse(p, &p));
87 DBG("memory limit = 0x%llx\n", memory_limit);
88
89 return 0;
90}
91early_param("mem", early_parse_mem);
92
93/*
94 * overlaps_initrd - check for overlap with page aligned extension of
95 * initrd.
96 */
97static inline int overlaps_initrd(unsigned long start, unsigned long size)
98{
99#ifdef CONFIG_BLK_DEV_INITRD
100 if (!initrd_start)
101 return 0;
102
103 return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
104 start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
105#else
106 return 0;
107#endif
108}
109
110/**
111 * move_device_tree - move tree to an unused area, if needed.
112 *
113 * The device tree may be allocated beyond our memory limit, or inside the
114 * crash kernel region for kdump, or within the page aligned range of initrd.
115 * If so, move it out of the way.
116 */
117static void __init move_device_tree(void)
118{
119 unsigned long start, size;
120 void *p;
121
122 DBG("-> move_device_tree\n");
123
124 start = __pa(initial_boot_params);
125 size = fdt_totalsize(initial_boot_params);
126
127 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
128 overlaps_crashkernel(start, size) ||
129 overlaps_initrd(start, size)) {
130 p = __va(memblock_alloc(size, PAGE_SIZE));
131 memcpy(p, initial_boot_params, size);
132 initial_boot_params = p;
133 DBG("Moved device tree to 0x%p\n", p);
134 }
135
136 DBG("<- move_device_tree\n");
137}
138
139/*
140 * ibm,pa-features is a per-cpu property that contains a string of
141 * attribute descriptors, each of which has a 2 byte header plus up
142 * to 254 bytes worth of processor attribute bits. First header
143 * byte specifies the number of bytes following the header.
144 * Second header byte is an "attribute-specifier" type, of which
145 * zero is the only currently-defined value.
146 * Implementation: Pass in the byte and bit offset for the feature
147 * that we are interested in. The function will return -1 if the
148 * pa-features property is missing, or a 1/0 to indicate if the feature
149 * is supported/not supported. Note that the bit numbers are
150 * big-endian to match the definition in PAPR.
151 */
152static struct ibm_pa_feature {
153 unsigned long cpu_features; /* CPU_FTR_xxx bit */
154 unsigned long mmu_features; /* MMU_FTR_xxx bit */
155 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
156 unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */
157 unsigned char pabyte; /* byte number in ibm,pa-features */
158 unsigned char pabit; /* bit number (big-endian) */
159 unsigned char invert; /* if 1, pa bit set => clear feature */
160} ibm_pa_features[] __initdata = {
161 { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU },
162 { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU },
163 { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
164 { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
165 { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
166#ifdef CONFIG_PPC_RADIX_MMU
167 { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX },
168#endif
169 { .pabyte = 1, .pabit = 1, .invert = 1, .cpu_features = CPU_FTR_NODSISRALIGN },
170 { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
171 .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
172 /*
173 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
174 * we don't want to turn on TM here, so we use the *_COMP versions
175 * which are 0 if the kernel doesn't support TM.
176 */
177 { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
178 .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
179};
180
181static void __init scan_features(unsigned long node, const unsigned char *ftrs,
182 unsigned long tablelen,
183 struct ibm_pa_feature *fp,
184 unsigned long ft_size)
185{
186 unsigned long i, len, bit;
187
188 /* find descriptor with type == 0 */
189 for (;;) {
190 if (tablelen < 3)
191 return;
192 len = 2 + ftrs[0];
193 if (tablelen < len)
194 return; /* descriptor 0 not found */
195 if (ftrs[1] == 0)
196 break;
197 tablelen -= len;
198 ftrs += len;
199 }
200
201 /* loop over bits we know about */
202 for (i = 0; i < ft_size; ++i, ++fp) {
203 if (fp->pabyte >= ftrs[0])
204 continue;
205 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
206 if (bit ^ fp->invert) {
207 cur_cpu_spec->cpu_features |= fp->cpu_features;
208 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
209 cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
210 cur_cpu_spec->mmu_features |= fp->mmu_features;
211 } else {
212 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
213 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
214 cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
215 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
216 }
217 }
218}
219
220static void __init check_cpu_pa_features(unsigned long node)
221{
222 const unsigned char *pa_ftrs;
223 int tablelen;
224
225 pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
226 if (pa_ftrs == NULL)
227 return;
228
229 scan_features(node, pa_ftrs, tablelen,
230 ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
231}
232
233#ifdef CONFIG_PPC_BOOK3S_64
234static void __init init_mmu_slb_size(unsigned long node)
235{
236 const __be32 *slb_size_ptr;
237
238 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
239 of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
240
241 if (slb_size_ptr)
242 mmu_slb_size = be32_to_cpup(slb_size_ptr);
243}
244#else
245#define init_mmu_slb_size(node) do { } while(0)
246#endif
247
248static struct feature_property {
249 const char *name;
250 u32 min_value;
251 unsigned long cpu_feature;
252 unsigned long cpu_user_ftr;
253} feature_properties[] __initdata = {
254#ifdef CONFIG_ALTIVEC
255 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
256 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
257#endif /* CONFIG_ALTIVEC */
258#ifdef CONFIG_VSX
259 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
260 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
261#endif /* CONFIG_VSX */
262#ifdef CONFIG_PPC64
263 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
264 {"ibm,purr", 1, CPU_FTR_PURR, 0},
265 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
266#endif /* CONFIG_PPC64 */
267};
268
269#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
270static inline void identical_pvr_fixup(unsigned long node)
271{
272 unsigned int pvr;
273 const char *model = of_get_flat_dt_prop(node, "model", NULL);
274
275 /*
276 * Since 440GR(x)/440EP(x) processors have the same pvr,
277 * we check the node path and set bit 28 in the cur_cpu_spec
278 * pvr for EP(x) processor version. This bit is always 0 in
279 * the "real" pvr. Then we call identify_cpu again with
280 * the new logical pvr to enable FPU support.
281 */
282 if (model && strstr(model, "440EP")) {
283 pvr = cur_cpu_spec->pvr_value | 0x8;
284 identify_cpu(0, pvr);
285 DBG("Using logical pvr %x for %s\n", pvr, model);
286 }
287}
288#else
289#define identical_pvr_fixup(node) do { } while(0)
290#endif
291
292static void __init check_cpu_feature_properties(unsigned long node)
293{
294 int i;
295 struct feature_property *fp = feature_properties;
296 const __be32 *prop;
297
298 for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) {
299 prop = of_get_flat_dt_prop(node, fp->name, NULL);
300 if (prop && be32_to_cpup(prop) >= fp->min_value) {
301 cur_cpu_spec->cpu_features |= fp->cpu_feature;
302 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
303 }
304 }
305}
306
307static int __init early_init_dt_scan_cpus(unsigned long node,
308 const char *uname, int depth,
309 void *data)
310{
311 const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
312 const __be32 *prop;
313 const __be32 *intserv;
314 int i, nthreads;
315 int len;
316 int found = -1;
317 int found_thread = 0;
318
319 /* We are scanning "cpu" nodes only */
320 if (type == NULL || strcmp(type, "cpu") != 0)
321 return 0;
322
323 /* Get physical cpuid */
324 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
325 if (!intserv)
326 intserv = of_get_flat_dt_prop(node, "reg", &len);
327
328 nthreads = len / sizeof(int);
329
330 /*
331 * Now see if any of these threads match our boot cpu.
332 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
333 */
334 for (i = 0; i < nthreads; i++) {
335 /*
336 * version 2 of the kexec param format adds the phys cpuid of
337 * booted proc.
338 */
339 if (fdt_version(initial_boot_params) >= 2) {
340 if (be32_to_cpu(intserv[i]) ==
341 fdt_boot_cpuid_phys(initial_boot_params)) {
342 found = boot_cpu_count;
343 found_thread = i;
344 }
345 } else {
346 /*
347 * Check if it's the boot-cpu, set it's hw index now,
348 * unfortunately this format did not support booting
349 * off secondary threads.
350 */
351 if (of_get_flat_dt_prop(node,
352 "linux,boot-cpu", NULL) != NULL)
353 found = boot_cpu_count;
354 }
355#ifdef CONFIG_SMP
356 /* logical cpu id is always 0 on UP kernels */
357 boot_cpu_count++;
358#endif
359 }
360
361 /* Not the boot CPU */
362 if (found < 0)
363 return 0;
364
365 DBG("boot cpu: logical %d physical %d\n", found,
366 be32_to_cpu(intserv[found_thread]));
367 boot_cpuid = found;
368
369 /*
370 * PAPR defines "logical" PVR values for cpus that
371 * meet various levels of the architecture:
372 * 0x0f000001 Architecture version 2.04
373 * 0x0f000002 Architecture version 2.05
374 * If the cpu-version property in the cpu node contains
375 * such a value, we call identify_cpu again with the
376 * logical PVR value in order to use the cpu feature
377 * bits appropriate for the architecture level.
378 *
379 * A POWER6 partition in "POWER6 architected" mode
380 * uses the 0x0f000002 PVR value; in POWER5+ mode
381 * it uses 0x0f000001.
382 *
383 * If we're using device tree CPU feature discovery then we don't
384 * support the cpu-version property, and it's the responsibility of the
385 * firmware/hypervisor to provide the correct feature set for the
386 * architecture level via the ibm,powerpc-cpu-features binding.
387 */
388 if (!dt_cpu_ftrs_in_use()) {
389 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
390 if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
391 identify_cpu(0, be32_to_cpup(prop));
392
393 check_cpu_feature_properties(node);
394 check_cpu_pa_features(node);
395 }
396
397 identical_pvr_fixup(node);
398 init_mmu_slb_size(node);
399
400#ifdef CONFIG_PPC64
401 if (nthreads == 1)
402 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
403 else if (!dt_cpu_ftrs_in_use())
404 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
405 allocate_paca(boot_cpuid);
406#endif
407 set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
408
409 return 0;
410}
411
412static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
413 const char *uname,
414 int depth, void *data)
415{
416 const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
417
418 /* Use common scan routine to determine if this is the chosen node */
419 if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
420 return 0;
421
422#ifdef CONFIG_PPC64
423 /* check if iommu is forced on or off */
424 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
425 iommu_is_off = 1;
426 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
427 iommu_force_on = 1;
428#endif
429
430 /* mem=x on the command line is the preferred mechanism */
431 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
432 if (lprop)
433 memory_limit = *lprop;
434
435#ifdef CONFIG_PPC64
436 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
437 if (lprop)
438 tce_alloc_start = *lprop;
439 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
440 if (lprop)
441 tce_alloc_end = *lprop;
442#endif
443
444#ifdef CONFIG_KEXEC_CORE
445 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
446 if (lprop)
447 crashk_res.start = *lprop;
448
449 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
450 if (lprop)
451 crashk_res.end = crashk_res.start + *lprop - 1;
452#endif
453
454 /* break now */
455 return 1;
456}
457
458#ifdef CONFIG_PPC_PSERIES
459/*
460 * Interpret the ibm dynamic reconfiguration memory LMBs.
461 * This contains a list of memory blocks along with NUMA affinity
462 * information.
463 */
464static void __init early_init_drmem_lmb(struct drmem_lmb *lmb,
465 const __be32 **usm)
466{
467 u64 base, size;
468 int is_kexec_kdump = 0, rngs;
469
470 base = lmb->base_addr;
471 size = drmem_lmb_size();
472 rngs = 1;
473
474 /*
475 * Skip this block if the reserved bit is set in flags
476 * or if the block is not assigned to this partition.
477 */
478 if ((lmb->flags & DRCONF_MEM_RESERVED) ||
479 !(lmb->flags & DRCONF_MEM_ASSIGNED))
480 return;
481
482 if (*usm)
483 is_kexec_kdump = 1;
484
485 if (is_kexec_kdump) {
486 /*
487 * For each memblock in ibm,dynamic-memory, a
488 * corresponding entry in linux,drconf-usable-memory
489 * property contains a counter 'p' followed by 'p'
490 * (base, size) duple. Now read the counter from
491 * linux,drconf-usable-memory property
492 */
493 rngs = dt_mem_next_cell(dt_root_size_cells, usm);
494 if (!rngs) /* there are no (base, size) duple */
495 return;
496 }
497
498 do {
499 if (is_kexec_kdump) {
500 base = dt_mem_next_cell(dt_root_addr_cells, usm);
501 size = dt_mem_next_cell(dt_root_size_cells, usm);
502 }
503
504 if (iommu_is_off) {
505 if (base >= 0x80000000ul)
506 continue;
507 if ((base + size) > 0x80000000ul)
508 size = 0x80000000ul - base;
509 }
510
511 DBG("Adding: %llx -> %llx\n", base, size);
512 memblock_add(base, size);
513 } while (--rngs);
514}
515#endif /* CONFIG_PPC_PSERIES */
516
517static int __init early_init_dt_scan_memory_ppc(unsigned long node,
518 const char *uname,
519 int depth, void *data)
520{
521#ifdef CONFIG_PPC_PSERIES
522 if (depth == 1 &&
523 strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) {
524 walk_drmem_lmbs_early(node, early_init_drmem_lmb);
525 return 0;
526 }
527#endif
528
529 return early_init_dt_scan_memory(node, uname, depth, data);
530}
531
532/*
533 * For a relocatable kernel, we need to get the memstart_addr first,
534 * then use it to calculate the virtual kernel start address. This has
535 * to happen at a very early stage (before machine_init). In this case,
536 * we just want to get the memstart_address and would not like to mess the
537 * memblock at this stage. So introduce a variable to skip the memblock_add()
538 * for this reason.
539 */
540#ifdef CONFIG_RELOCATABLE
541static int add_mem_to_memblock = 1;
542#else
543#define add_mem_to_memblock 1
544#endif
545
546void __init early_init_dt_add_memory_arch(u64 base, u64 size)
547{
548#ifdef CONFIG_PPC64
549 if (iommu_is_off) {
550 if (base >= 0x80000000ul)
551 return;
552 if ((base + size) > 0x80000000ul)
553 size = 0x80000000ul - base;
554 }
555#endif
556 /* Keep track of the beginning of memory -and- the size of
557 * the very first block in the device-tree as it represents
558 * the RMA on ppc64 server
559 */
560 if (base < memstart_addr) {
561 memstart_addr = base;
562 first_memblock_size = size;
563 }
564
565 /* Add the chunk to the MEMBLOCK list */
566 if (add_mem_to_memblock)
567 memblock_add(base, size);
568}
569
570static void __init early_reserve_mem_dt(void)
571{
572 unsigned long i, dt_root;
573 int len;
574 const __be32 *prop;
575
576 early_init_fdt_reserve_self();
577 early_init_fdt_scan_reserved_mem();
578
579 dt_root = of_get_flat_dt_root();
580
581 prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
582
583 if (!prop)
584 return;
585
586 DBG("Found new-style reserved-ranges\n");
587
588 /* Each reserved range is an (address,size) pair, 2 cells each,
589 * totalling 4 cells per range. */
590 for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
591 u64 base, size;
592
593 base = of_read_number(prop + (i * 4) + 0, 2);
594 size = of_read_number(prop + (i * 4) + 2, 2);
595
596 if (size) {
597 DBG("reserving: %llx -> %llx\n", base, size);
598 memblock_reserve(base, size);
599 }
600 }
601}
602
603static void __init early_reserve_mem(void)
604{
605 __be64 *reserve_map;
606
607 reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
608 fdt_off_mem_rsvmap(initial_boot_params));
609
610 /* Look for the new "reserved-regions" property in the DT */
611 early_reserve_mem_dt();
612
613#ifdef CONFIG_BLK_DEV_INITRD
614 /* Then reserve the initrd, if any */
615 if (initrd_start && (initrd_end > initrd_start)) {
616 memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
617 _ALIGN_UP(initrd_end, PAGE_SIZE) -
618 _ALIGN_DOWN(initrd_start, PAGE_SIZE));
619 }
620#endif /* CONFIG_BLK_DEV_INITRD */
621
622#ifdef CONFIG_PPC32
623 /*
624 * Handle the case where we might be booting from an old kexec
625 * image that setup the mem_rsvmap as pairs of 32-bit values
626 */
627 if (be64_to_cpup(reserve_map) > 0xffffffffull) {
628 u32 base_32, size_32;
629 __be32 *reserve_map_32 = (__be32 *)reserve_map;
630
631 DBG("Found old 32-bit reserve map\n");
632
633 while (1) {
634 base_32 = be32_to_cpup(reserve_map_32++);
635 size_32 = be32_to_cpup(reserve_map_32++);
636 if (size_32 == 0)
637 break;
638 DBG("reserving: %x -> %x\n", base_32, size_32);
639 memblock_reserve(base_32, size_32);
640 }
641 return;
642 }
643#endif
644}
645
646#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
647static bool tm_disabled __initdata;
648
649static int __init parse_ppc_tm(char *str)
650{
651 bool res;
652
653 if (kstrtobool(str, &res))
654 return -EINVAL;
655
656 tm_disabled = !res;
657
658 return 0;
659}
660early_param("ppc_tm", parse_ppc_tm);
661
662static void __init tm_init(void)
663{
664 if (tm_disabled) {
665 pr_info("Disabling hardware transactional memory (HTM)\n");
666 cur_cpu_spec->cpu_user_features2 &=
667 ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM);
668 cur_cpu_spec->cpu_features &= ~CPU_FTR_TM;
669 return;
670 }
671
672 pnv_tm_init();
673}
674#else
675static void tm_init(void) { }
676#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
677
678void __init early_init_devtree(void *params)
679{
680 phys_addr_t limit;
681
682 DBG(" -> early_init_devtree(%p)\n", params);
683
684 /* Too early to BUG_ON(), do it by hand */
685 if (!early_init_dt_verify(params))
686 panic("BUG: Failed verifying flat device tree, bad version?");
687
688#ifdef CONFIG_PPC_RTAS
689 /* Some machines might need RTAS info for debugging, grab it now. */
690 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
691#endif
692
693#ifdef CONFIG_PPC_POWERNV
694 /* Some machines might need OPAL info for debugging, grab it now. */
695 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
696#endif
697
698#ifdef CONFIG_FA_DUMP
699 /* scan tree to see if dump is active during last boot */
700 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
701#endif
702
703 /* Retrieve various informations from the /chosen node of the
704 * device-tree, including the platform type, initrd location and
705 * size, TCE reserve, and more ...
706 */
707 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
708
709 /* Scan memory nodes and rebuild MEMBLOCKs */
710 of_scan_flat_dt(early_init_dt_scan_root, NULL);
711 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
712
713 parse_early_param();
714
715 /* make sure we've parsed cmdline for mem= before this */
716 if (memory_limit)
717 first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
718 setup_initial_memory_limit(memstart_addr, first_memblock_size);
719 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
720 memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
721 /* If relocatable, reserve first 32k for interrupt vectors etc. */
722 if (PHYSICAL_START > MEMORY_START)
723 memblock_reserve(MEMORY_START, 0x8000);
724 reserve_kdump_trampoline();
725#ifdef CONFIG_FA_DUMP
726 /*
727 * If we fail to reserve memory for firmware-assisted dump then
728 * fallback to kexec based kdump.
729 */
730 if (fadump_reserve_mem() == 0)
731#endif
732 reserve_crashkernel();
733 early_reserve_mem();
734
735 /* Ensure that total memory size is page-aligned. */
736 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
737 memblock_enforce_memory_limit(limit);
738
739 memblock_allow_resize();
740 memblock_dump_all();
741
742 DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
743
744 /* We may need to relocate the flat tree, do it now.
745 * FIXME .. and the initrd too? */
746 move_device_tree();
747
748 allocate_paca_ptrs();
749
750 DBG("Scanning CPUs ...\n");
751
752 dt_cpu_ftrs_scan();
753
754 /* Retrieve CPU related informations from the flat tree
755 * (altivec support, boot CPU ID, ...)
756 */
757 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
758 if (boot_cpuid < 0) {
759 printk("Failed to identify boot CPU !\n");
760 BUG();
761 }
762
763#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
764 /* We'll later wait for secondaries to check in; there are
765 * NCPUS-1 non-boot CPUs :-)
766 */
767 spinning_secondaries = boot_cpu_count - 1;
768#endif
769
770 mmu_early_init_devtree();
771
772#ifdef CONFIG_PPC_POWERNV
773 /* Scan and build the list of machine check recoverable ranges */
774 of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
775#endif
776 epapr_paravirt_early_init();
777
778 /* Now try to figure out if we are running on LPAR and so on */
779 pseries_probe_fw_features();
780
781#ifdef CONFIG_PPC_PS3
782 /* Identify PS3 firmware */
783 if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3"))
784 powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
785#endif
786
787 tm_init();
788
789 DBG(" <- early_init_devtree()\n");
790}
791
792#ifdef CONFIG_RELOCATABLE
793/*
794 * This function run before early_init_devtree, so we have to init
795 * initial_boot_params.
796 */
797void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
798{
799 /* Setup flat device-tree pointer */
800 initial_boot_params = params;
801
802 /*
803 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
804 * mess the memblock.
805 */
806 add_mem_to_memblock = 0;
807 of_scan_flat_dt(early_init_dt_scan_root, NULL);
808 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
809 add_mem_to_memblock = 1;
810
811 if (size)
812 *size = first_memblock_size;
813}
814#endif
815
816/*******
817 *
818 * New implementation of the OF "find" APIs, return a refcounted
819 * object, call of_node_put() when done. The device tree and list
820 * are protected by a rw_lock.
821 *
822 * Note that property management will need some locking as well,
823 * this isn't dealt with yet.
824 *
825 *******/
826
827/**
828 * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
829 * @np: device node of the device
830 *
831 * This looks for a property "ibm,chip-id" in the node or any
832 * of its parents and returns its content, or -1 if it cannot
833 * be found.
834 */
835int of_get_ibm_chip_id(struct device_node *np)
836{
837 of_node_get(np);
838 while (np) {
839 u32 chip_id;
840
841 /*
842 * Skiboot may produce memory nodes that contain more than one
843 * cell in chip-id, we only read the first one here.
844 */
845 if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
846 of_node_put(np);
847 return chip_id;
848 }
849
850 np = of_get_next_parent(np);
851 }
852 return -1;
853}
854EXPORT_SYMBOL(of_get_ibm_chip_id);
855
856/**
857 * cpu_to_chip_id - Return the cpus chip-id
858 * @cpu: The logical cpu number.
859 *
860 * Return the value of the ibm,chip-id property corresponding to the given
861 * logical cpu number. If the chip-id can not be found, returns -1.
862 */
863int cpu_to_chip_id(int cpu)
864{
865 struct device_node *np;
866
867 np = of_get_cpu_node(cpu, NULL);
868 if (!np)
869 return -1;
870
871 of_node_put(np);
872 return of_get_ibm_chip_id(np);
873}
874EXPORT_SYMBOL(cpu_to_chip_id);
875
876bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
877{
878#ifdef CONFIG_SMP
879 /*
880 * Early firmware scanning must use this rather than
881 * get_hard_smp_processor_id because we don't have pacas allocated
882 * until memory topology is discovered.
883 */
884 if (cpu_to_phys_id != NULL)
885 return (int)phys_id == cpu_to_phys_id[cpu];
886#endif
887
888 return (int)phys_id == get_hard_smp_processor_id(cpu);
889}
1/*
2 * Procedures for creating, accessing and interpreting the device tree.
3 *
4 * Paul Mackerras August 1996.
5 * Copyright (C) 1996-2005 Paul Mackerras.
6 *
7 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
8 * {engebret|bergner}@us.ibm.com
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 */
15
16#undef DEBUG
17
18#include <stdarg.h>
19#include <linux/kernel.h>
20#include <linux/string.h>
21#include <linux/init.h>
22#include <linux/threads.h>
23#include <linux/spinlock.h>
24#include <linux/types.h>
25#include <linux/pci.h>
26#include <linux/stringify.h>
27#include <linux/delay.h>
28#include <linux/initrd.h>
29#include <linux/bitops.h>
30#include <linux/export.h>
31#include <linux/kexec.h>
32#include <linux/debugfs.h>
33#include <linux/irq.h>
34#include <linux/memblock.h>
35
36#include <asm/prom.h>
37#include <asm/rtas.h>
38#include <asm/page.h>
39#include <asm/processor.h>
40#include <asm/irq.h>
41#include <asm/io.h>
42#include <asm/kdump.h>
43#include <asm/smp.h>
44#include <asm/mmu.h>
45#include <asm/paca.h>
46#include <asm/pgtable.h>
47#include <asm/pci.h>
48#include <asm/iommu.h>
49#include <asm/btext.h>
50#include <asm/sections.h>
51#include <asm/machdep.h>
52#include <asm/pSeries_reconfig.h>
53#include <asm/pci-bridge.h>
54#include <asm/kexec.h>
55#include <asm/opal.h>
56#include <asm/fadump.h>
57
58#include <mm/mmu_decl.h>
59
60#ifdef DEBUG
61#define DBG(fmt...) printk(KERN_ERR fmt)
62#else
63#define DBG(fmt...)
64#endif
65
66#ifdef CONFIG_PPC64
67int __initdata iommu_is_off;
68int __initdata iommu_force_on;
69unsigned long tce_alloc_start, tce_alloc_end;
70u64 ppc64_rma_size;
71#endif
72static phys_addr_t first_memblock_size;
73static int __initdata boot_cpu_count;
74
75static int __init early_parse_mem(char *p)
76{
77 if (!p)
78 return 1;
79
80 memory_limit = PAGE_ALIGN(memparse(p, &p));
81 DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
82
83 return 0;
84}
85early_param("mem", early_parse_mem);
86
87/*
88 * overlaps_initrd - check for overlap with page aligned extension of
89 * initrd.
90 */
91static inline int overlaps_initrd(unsigned long start, unsigned long size)
92{
93#ifdef CONFIG_BLK_DEV_INITRD
94 if (!initrd_start)
95 return 0;
96
97 return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
98 start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
99#else
100 return 0;
101#endif
102}
103
104/**
105 * move_device_tree - move tree to an unused area, if needed.
106 *
107 * The device tree may be allocated beyond our memory limit, or inside the
108 * crash kernel region for kdump, or within the page aligned range of initrd.
109 * If so, move it out of the way.
110 */
111static void __init move_device_tree(void)
112{
113 unsigned long start, size;
114 void *p;
115
116 DBG("-> move_device_tree\n");
117
118 start = __pa(initial_boot_params);
119 size = be32_to_cpu(initial_boot_params->totalsize);
120
121 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
122 overlaps_crashkernel(start, size) ||
123 overlaps_initrd(start, size)) {
124 p = __va(memblock_alloc(size, PAGE_SIZE));
125 memcpy(p, initial_boot_params, size);
126 initial_boot_params = (struct boot_param_header *)p;
127 DBG("Moved device tree to 0x%p\n", p);
128 }
129
130 DBG("<- move_device_tree\n");
131}
132
133/*
134 * ibm,pa-features is a per-cpu property that contains a string of
135 * attribute descriptors, each of which has a 2 byte header plus up
136 * to 254 bytes worth of processor attribute bits. First header
137 * byte specifies the number of bytes following the header.
138 * Second header byte is an "attribute-specifier" type, of which
139 * zero is the only currently-defined value.
140 * Implementation: Pass in the byte and bit offset for the feature
141 * that we are interested in. The function will return -1 if the
142 * pa-features property is missing, or a 1/0 to indicate if the feature
143 * is supported/not supported. Note that the bit numbers are
144 * big-endian to match the definition in PAPR.
145 */
146static struct ibm_pa_feature {
147 unsigned long cpu_features; /* CPU_FTR_xxx bit */
148 unsigned long mmu_features; /* MMU_FTR_xxx bit */
149 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
150 unsigned char pabyte; /* byte number in ibm,pa-features */
151 unsigned char pabit; /* bit number (big-endian) */
152 unsigned char invert; /* if 1, pa bit set => clear feature */
153} ibm_pa_features[] __initdata = {
154 {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0},
155 {0, 0, PPC_FEATURE_HAS_FPU, 0, 1, 0},
156 {0, MMU_FTR_SLB, 0, 0, 2, 0},
157 {CPU_FTR_CTRL, 0, 0, 0, 3, 0},
158 {CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0},
159 {CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1},
160 {0, MMU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0},
161 {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
162};
163
164static void __init scan_features(unsigned long node, unsigned char *ftrs,
165 unsigned long tablelen,
166 struct ibm_pa_feature *fp,
167 unsigned long ft_size)
168{
169 unsigned long i, len, bit;
170
171 /* find descriptor with type == 0 */
172 for (;;) {
173 if (tablelen < 3)
174 return;
175 len = 2 + ftrs[0];
176 if (tablelen < len)
177 return; /* descriptor 0 not found */
178 if (ftrs[1] == 0)
179 break;
180 tablelen -= len;
181 ftrs += len;
182 }
183
184 /* loop over bits we know about */
185 for (i = 0; i < ft_size; ++i, ++fp) {
186 if (fp->pabyte >= ftrs[0])
187 continue;
188 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
189 if (bit ^ fp->invert) {
190 cur_cpu_spec->cpu_features |= fp->cpu_features;
191 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
192 cur_cpu_spec->mmu_features |= fp->mmu_features;
193 } else {
194 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
195 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
196 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
197 }
198 }
199}
200
201static void __init check_cpu_pa_features(unsigned long node)
202{
203 unsigned char *pa_ftrs;
204 unsigned long tablelen;
205
206 pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
207 if (pa_ftrs == NULL)
208 return;
209
210 scan_features(node, pa_ftrs, tablelen,
211 ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
212}
213
214#ifdef CONFIG_PPC_STD_MMU_64
215static void __init check_cpu_slb_size(unsigned long node)
216{
217 u32 *slb_size_ptr;
218
219 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
220 if (slb_size_ptr != NULL) {
221 mmu_slb_size = *slb_size_ptr;
222 return;
223 }
224 slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
225 if (slb_size_ptr != NULL) {
226 mmu_slb_size = *slb_size_ptr;
227 }
228}
229#else
230#define check_cpu_slb_size(node) do { } while(0)
231#endif
232
233static struct feature_property {
234 const char *name;
235 u32 min_value;
236 unsigned long cpu_feature;
237 unsigned long cpu_user_ftr;
238} feature_properties[] __initdata = {
239#ifdef CONFIG_ALTIVEC
240 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
241 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
242#endif /* CONFIG_ALTIVEC */
243#ifdef CONFIG_VSX
244 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
245 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
246#endif /* CONFIG_VSX */
247#ifdef CONFIG_PPC64
248 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
249 {"ibm,purr", 1, CPU_FTR_PURR, 0},
250 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
251#endif /* CONFIG_PPC64 */
252};
253
254#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
255static inline void identical_pvr_fixup(unsigned long node)
256{
257 unsigned int pvr;
258 char *model = of_get_flat_dt_prop(node, "model", NULL);
259
260 /*
261 * Since 440GR(x)/440EP(x) processors have the same pvr,
262 * we check the node path and set bit 28 in the cur_cpu_spec
263 * pvr for EP(x) processor version. This bit is always 0 in
264 * the "real" pvr. Then we call identify_cpu again with
265 * the new logical pvr to enable FPU support.
266 */
267 if (model && strstr(model, "440EP")) {
268 pvr = cur_cpu_spec->pvr_value | 0x8;
269 identify_cpu(0, pvr);
270 DBG("Using logical pvr %x for %s\n", pvr, model);
271 }
272}
273#else
274#define identical_pvr_fixup(node) do { } while(0)
275#endif
276
277static void __init check_cpu_feature_properties(unsigned long node)
278{
279 unsigned long i;
280 struct feature_property *fp = feature_properties;
281 const u32 *prop;
282
283 for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
284 prop = of_get_flat_dt_prop(node, fp->name, NULL);
285 if (prop && *prop >= fp->min_value) {
286 cur_cpu_spec->cpu_features |= fp->cpu_feature;
287 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
288 }
289 }
290}
291
292static int __init early_init_dt_scan_cpus(unsigned long node,
293 const char *uname, int depth,
294 void *data)
295{
296 char *type = of_get_flat_dt_prop(node, "device_type", NULL);
297 const u32 *prop;
298 const u32 *intserv;
299 int i, nthreads;
300 unsigned long len;
301 int found = -1;
302 int found_thread = 0;
303
304 /* We are scanning "cpu" nodes only */
305 if (type == NULL || strcmp(type, "cpu") != 0)
306 return 0;
307
308 /* Get physical cpuid */
309 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
310 if (intserv) {
311 nthreads = len / sizeof(int);
312 } else {
313 intserv = of_get_flat_dt_prop(node, "reg", NULL);
314 nthreads = 1;
315 }
316
317 /*
318 * Now see if any of these threads match our boot cpu.
319 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
320 */
321 for (i = 0; i < nthreads; i++) {
322 /*
323 * version 2 of the kexec param format adds the phys cpuid of
324 * booted proc.
325 */
326 if (initial_boot_params->version >= 2) {
327 if (intserv[i] == initial_boot_params->boot_cpuid_phys) {
328 found = boot_cpu_count;
329 found_thread = i;
330 }
331 } else {
332 /*
333 * Check if it's the boot-cpu, set it's hw index now,
334 * unfortunately this format did not support booting
335 * off secondary threads.
336 */
337 if (of_get_flat_dt_prop(node,
338 "linux,boot-cpu", NULL) != NULL)
339 found = boot_cpu_count;
340 }
341#ifdef CONFIG_SMP
342 /* logical cpu id is always 0 on UP kernels */
343 boot_cpu_count++;
344#endif
345 }
346
347 if (found >= 0) {
348 DBG("boot cpu: logical %d physical %d\n", found,
349 intserv[found_thread]);
350 boot_cpuid = found;
351 set_hard_smp_processor_id(found, intserv[found_thread]);
352
353 /*
354 * PAPR defines "logical" PVR values for cpus that
355 * meet various levels of the architecture:
356 * 0x0f000001 Architecture version 2.04
357 * 0x0f000002 Architecture version 2.05
358 * If the cpu-version property in the cpu node contains
359 * such a value, we call identify_cpu again with the
360 * logical PVR value in order to use the cpu feature
361 * bits appropriate for the architecture level.
362 *
363 * A POWER6 partition in "POWER6 architected" mode
364 * uses the 0x0f000002 PVR value; in POWER5+ mode
365 * it uses 0x0f000001.
366 */
367 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
368 if (prop && (*prop & 0xff000000) == 0x0f000000)
369 identify_cpu(0, *prop);
370
371 identical_pvr_fixup(node);
372 }
373
374 check_cpu_feature_properties(node);
375 check_cpu_pa_features(node);
376 check_cpu_slb_size(node);
377
378#ifdef CONFIG_PPC_PSERIES
379 if (nthreads > 1)
380 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
381 else
382 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
383#endif
384
385 return 0;
386}
387
388int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname,
389 int depth, void *data)
390{
391 unsigned long *lprop;
392
393 /* Use common scan routine to determine if this is the chosen node */
394 if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
395 return 0;
396
397#ifdef CONFIG_PPC64
398 /* check if iommu is forced on or off */
399 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
400 iommu_is_off = 1;
401 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
402 iommu_force_on = 1;
403#endif
404
405 /* mem=x on the command line is the preferred mechanism */
406 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
407 if (lprop)
408 memory_limit = *lprop;
409
410#ifdef CONFIG_PPC64
411 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
412 if (lprop)
413 tce_alloc_start = *lprop;
414 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
415 if (lprop)
416 tce_alloc_end = *lprop;
417#endif
418
419#ifdef CONFIG_KEXEC
420 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
421 if (lprop)
422 crashk_res.start = *lprop;
423
424 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
425 if (lprop)
426 crashk_res.end = crashk_res.start + *lprop - 1;
427#endif
428
429 /* break now */
430 return 1;
431}
432
433#ifdef CONFIG_PPC_PSERIES
434/*
435 * Interpret the ibm,dynamic-memory property in the
436 * /ibm,dynamic-reconfiguration-memory node.
437 * This contains a list of memory blocks along with NUMA affinity
438 * information.
439 */
440static int __init early_init_dt_scan_drconf_memory(unsigned long node)
441{
442 __be32 *dm, *ls, *usm;
443 unsigned long l, n, flags;
444 u64 base, size, memblock_size;
445 unsigned int is_kexec_kdump = 0, rngs;
446
447 ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
448 if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
449 return 0;
450 memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
451
452 dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
453 if (dm == NULL || l < sizeof(__be32))
454 return 0;
455
456 n = *dm++; /* number of entries */
457 if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
458 return 0;
459
460 /* check if this is a kexec/kdump kernel. */
461 usm = of_get_flat_dt_prop(node, "linux,drconf-usable-memory",
462 &l);
463 if (usm != NULL)
464 is_kexec_kdump = 1;
465
466 for (; n != 0; --n) {
467 base = dt_mem_next_cell(dt_root_addr_cells, &dm);
468 flags = dm[3];
469 /* skip DRC index, pad, assoc. list index, flags */
470 dm += 4;
471 /* skip this block if the reserved bit is set in flags (0x80)
472 or if the block is not assigned to this partition (0x8) */
473 if ((flags & 0x80) || !(flags & 0x8))
474 continue;
475 size = memblock_size;
476 rngs = 1;
477 if (is_kexec_kdump) {
478 /*
479 * For each memblock in ibm,dynamic-memory, a corresponding
480 * entry in linux,drconf-usable-memory property contains
481 * a counter 'p' followed by 'p' (base, size) duple.
482 * Now read the counter from
483 * linux,drconf-usable-memory property
484 */
485 rngs = dt_mem_next_cell(dt_root_size_cells, &usm);
486 if (!rngs) /* there are no (base, size) duple */
487 continue;
488 }
489 do {
490 if (is_kexec_kdump) {
491 base = dt_mem_next_cell(dt_root_addr_cells,
492 &usm);
493 size = dt_mem_next_cell(dt_root_size_cells,
494 &usm);
495 }
496 if (iommu_is_off) {
497 if (base >= 0x80000000ul)
498 continue;
499 if ((base + size) > 0x80000000ul)
500 size = 0x80000000ul - base;
501 }
502 memblock_add(base, size);
503 } while (--rngs);
504 }
505 memblock_dump_all();
506 return 0;
507}
508#else
509#define early_init_dt_scan_drconf_memory(node) 0
510#endif /* CONFIG_PPC_PSERIES */
511
512static int __init early_init_dt_scan_memory_ppc(unsigned long node,
513 const char *uname,
514 int depth, void *data)
515{
516 if (depth == 1 &&
517 strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
518 return early_init_dt_scan_drconf_memory(node);
519
520 return early_init_dt_scan_memory(node, uname, depth, data);
521}
522
523void __init early_init_dt_add_memory_arch(u64 base, u64 size)
524{
525#ifdef CONFIG_PPC64
526 if (iommu_is_off) {
527 if (base >= 0x80000000ul)
528 return;
529 if ((base + size) > 0x80000000ul)
530 size = 0x80000000ul - base;
531 }
532#endif
533 /* Keep track of the beginning of memory -and- the size of
534 * the very first block in the device-tree as it represents
535 * the RMA on ppc64 server
536 */
537 if (base < memstart_addr) {
538 memstart_addr = base;
539 first_memblock_size = size;
540 }
541
542 /* Add the chunk to the MEMBLOCK list */
543 memblock_add(base, size);
544}
545
546void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
547{
548 return __va(memblock_alloc(size, align));
549}
550
551#ifdef CONFIG_BLK_DEV_INITRD
552void __init early_init_dt_setup_initrd_arch(unsigned long start,
553 unsigned long end)
554{
555 initrd_start = (unsigned long)__va(start);
556 initrd_end = (unsigned long)__va(end);
557 initrd_below_start_ok = 1;
558}
559#endif
560
561static void __init early_reserve_mem(void)
562{
563 u64 base, size;
564 u64 *reserve_map;
565 unsigned long self_base;
566 unsigned long self_size;
567
568 reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
569 initial_boot_params->off_mem_rsvmap);
570
571 /* before we do anything, lets reserve the dt blob */
572 self_base = __pa((unsigned long)initial_boot_params);
573 self_size = initial_boot_params->totalsize;
574 memblock_reserve(self_base, self_size);
575
576#ifdef CONFIG_BLK_DEV_INITRD
577 /* then reserve the initrd, if any */
578 if (initrd_start && (initrd_end > initrd_start))
579 memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
580 _ALIGN_UP(initrd_end, PAGE_SIZE) -
581 _ALIGN_DOWN(initrd_start, PAGE_SIZE));
582#endif /* CONFIG_BLK_DEV_INITRD */
583
584#ifdef CONFIG_PPC32
585 /*
586 * Handle the case where we might be booting from an old kexec
587 * image that setup the mem_rsvmap as pairs of 32-bit values
588 */
589 if (*reserve_map > 0xffffffffull) {
590 u32 base_32, size_32;
591 u32 *reserve_map_32 = (u32 *)reserve_map;
592
593 while (1) {
594 base_32 = *(reserve_map_32++);
595 size_32 = *(reserve_map_32++);
596 if (size_32 == 0)
597 break;
598 /* skip if the reservation is for the blob */
599 if (base_32 == self_base && size_32 == self_size)
600 continue;
601 DBG("reserving: %x -> %x\n", base_32, size_32);
602 memblock_reserve(base_32, size_32);
603 }
604 return;
605 }
606#endif
607 while (1) {
608 base = *(reserve_map++);
609 size = *(reserve_map++);
610 if (size == 0)
611 break;
612 DBG("reserving: %llx -> %llx\n", base, size);
613 memblock_reserve(base, size);
614 }
615}
616
617void __init early_init_devtree(void *params)
618{
619 phys_addr_t limit;
620
621 DBG(" -> early_init_devtree(%p)\n", params);
622
623 /* Setup flat device-tree pointer */
624 initial_boot_params = params;
625
626#ifdef CONFIG_PPC_RTAS
627 /* Some machines might need RTAS info for debugging, grab it now. */
628 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
629#endif
630
631#ifdef CONFIG_PPC_POWERNV
632 /* Some machines might need OPAL info for debugging, grab it now. */
633 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
634#endif
635
636#ifdef CONFIG_FA_DUMP
637 /* scan tree to see if dump is active during last boot */
638 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
639#endif
640
641 /* Pre-initialize the cmd_line with the content of boot_commmand_line,
642 * which will be empty except when the content of the variable has
643 * been overriden by a bootloading mechanism. This happens typically
644 * with HAL takeover
645 */
646 strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
647
648 /* Retrieve various informations from the /chosen node of the
649 * device-tree, including the platform type, initrd location and
650 * size, TCE reserve, and more ...
651 */
652 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
653
654 /* Scan memory nodes and rebuild MEMBLOCKs */
655 of_scan_flat_dt(early_init_dt_scan_root, NULL);
656 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
657
658 /* Save command line for /proc/cmdline and then parse parameters */
659 strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
660 parse_early_param();
661
662 /* make sure we've parsed cmdline for mem= before this */
663 if (memory_limit)
664 first_memblock_size = min(first_memblock_size, memory_limit);
665 setup_initial_memory_limit(memstart_addr, first_memblock_size);
666 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
667 memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
668 /* If relocatable, reserve first 32k for interrupt vectors etc. */
669 if (PHYSICAL_START > MEMORY_START)
670 memblock_reserve(MEMORY_START, 0x8000);
671 reserve_kdump_trampoline();
672#ifdef CONFIG_FA_DUMP
673 /*
674 * If we fail to reserve memory for firmware-assisted dump then
675 * fallback to kexec based kdump.
676 */
677 if (fadump_reserve_mem() == 0)
678#endif
679 reserve_crashkernel();
680 early_reserve_mem();
681
682 /*
683 * Ensure that total memory size is page-aligned, because otherwise
684 * mark_bootmem() gets upset.
685 */
686 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
687 memblock_enforce_memory_limit(limit);
688
689 memblock_allow_resize();
690 memblock_dump_all();
691
692 DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
693
694 /* We may need to relocate the flat tree, do it now.
695 * FIXME .. and the initrd too? */
696 move_device_tree();
697
698 allocate_pacas();
699
700 DBG("Scanning CPUs ...\n");
701
702 /* Retrieve CPU related informations from the flat tree
703 * (altivec support, boot CPU ID, ...)
704 */
705 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
706
707#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
708 /* We'll later wait for secondaries to check in; there are
709 * NCPUS-1 non-boot CPUs :-)
710 */
711 spinning_secondaries = boot_cpu_count - 1;
712#endif
713
714 DBG(" <- early_init_devtree()\n");
715}
716
717/*******
718 *
719 * New implementation of the OF "find" APIs, return a refcounted
720 * object, call of_node_put() when done. The device tree and list
721 * are protected by a rw_lock.
722 *
723 * Note that property management will need some locking as well,
724 * this isn't dealt with yet.
725 *
726 *******/
727
728/**
729 * of_find_next_cache_node - Find a node's subsidiary cache
730 * @np: node of type "cpu" or "cache"
731 *
732 * Returns a node pointer with refcount incremented, use
733 * of_node_put() on it when done. Caller should hold a reference
734 * to np.
735 */
736struct device_node *of_find_next_cache_node(struct device_node *np)
737{
738 struct device_node *child;
739 const phandle *handle;
740
741 handle = of_get_property(np, "l2-cache", NULL);
742 if (!handle)
743 handle = of_get_property(np, "next-level-cache", NULL);
744
745 if (handle)
746 return of_find_node_by_phandle(*handle);
747
748 /* OF on pmac has nodes instead of properties named "l2-cache"
749 * beneath CPU nodes.
750 */
751 if (!strcmp(np->type, "cpu"))
752 for_each_child_of_node(np, child)
753 if (!strcmp(child->type, "cache"))
754 return child;
755
756 return NULL;
757}
758
759#ifdef CONFIG_PPC_PSERIES
760/*
761 * Fix up the uninitialized fields in a new device node:
762 * name, type and pci-specific fields
763 */
764
765static int of_finish_dynamic_node(struct device_node *node)
766{
767 struct device_node *parent = of_get_parent(node);
768 int err = 0;
769 const phandle *ibm_phandle;
770
771 node->name = of_get_property(node, "name", NULL);
772 node->type = of_get_property(node, "device_type", NULL);
773
774 if (!node->name)
775 node->name = "<NULL>";
776 if (!node->type)
777 node->type = "<NULL>";
778
779 if (!parent) {
780 err = -ENODEV;
781 goto out;
782 }
783
784 /* We don't support that function on PowerMac, at least
785 * not yet
786 */
787 if (machine_is(powermac))
788 return -ENODEV;
789
790 /* fix up new node's phandle field */
791 if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
792 node->phandle = *ibm_phandle;
793
794out:
795 of_node_put(parent);
796 return err;
797}
798
799static int prom_reconfig_notifier(struct notifier_block *nb,
800 unsigned long action, void *node)
801{
802 int err;
803
804 switch (action) {
805 case PSERIES_RECONFIG_ADD:
806 err = of_finish_dynamic_node(node);
807 if (err < 0)
808 printk(KERN_ERR "finish_node returned %d\n", err);
809 break;
810 default:
811 err = 0;
812 break;
813 }
814 return notifier_from_errno(err);
815}
816
817static struct notifier_block prom_reconfig_nb = {
818 .notifier_call = prom_reconfig_notifier,
819 .priority = 10, /* This one needs to run first */
820};
821
822static int __init prom_reconfig_setup(void)
823{
824 return pSeries_reconfig_notifier_register(&prom_reconfig_nb);
825}
826__initcall(prom_reconfig_setup);
827#endif
828
829/* Find the device node for a given logical cpu number, also returns the cpu
830 * local thread number (index in ibm,interrupt-server#s) if relevant and
831 * asked for (non NULL)
832 */
833struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
834{
835 int hardid;
836 struct device_node *np;
837
838 hardid = get_hard_smp_processor_id(cpu);
839
840 for_each_node_by_type(np, "cpu") {
841 const u32 *intserv;
842 unsigned int plen, t;
843
844 /* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
845 * fallback to "reg" property and assume no threads
846 */
847 intserv = of_get_property(np, "ibm,ppc-interrupt-server#s",
848 &plen);
849 if (intserv == NULL) {
850 const u32 *reg = of_get_property(np, "reg", NULL);
851 if (reg == NULL)
852 continue;
853 if (*reg == hardid) {
854 if (thread)
855 *thread = 0;
856 return np;
857 }
858 } else {
859 plen /= sizeof(u32);
860 for (t = 0; t < plen; t++) {
861 if (hardid == intserv[t]) {
862 if (thread)
863 *thread = t;
864 return np;
865 }
866 }
867 }
868 }
869 return NULL;
870}
871EXPORT_SYMBOL(of_get_cpu_node);
872
873#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
874static struct debugfs_blob_wrapper flat_dt_blob;
875
876static int __init export_flat_device_tree(void)
877{
878 struct dentry *d;
879
880 flat_dt_blob.data = initial_boot_params;
881 flat_dt_blob.size = initial_boot_params->totalsize;
882
883 d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
884 powerpc_debugfs_root, &flat_dt_blob);
885 if (!d)
886 return 1;
887
888 return 0;
889}
890__initcall(export_flat_device_tree);
891#endif