Loading...
1/*
2 * Procedures for creating, accessing and interpreting the device tree.
3 *
4 * Paul Mackerras August 1996.
5 * Copyright (C) 1996-2005 Paul Mackerras.
6 *
7 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
8 * {engebret|bergner}@us.ibm.com
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 */
15
16#undef DEBUG
17
18#include <stdarg.h>
19#include <linux/kernel.h>
20#include <linux/string.h>
21#include <linux/init.h>
22#include <linux/threads.h>
23#include <linux/spinlock.h>
24#include <linux/types.h>
25#include <linux/pci.h>
26#include <linux/stringify.h>
27#include <linux/delay.h>
28#include <linux/initrd.h>
29#include <linux/bitops.h>
30#include <linux/export.h>
31#include <linux/kexec.h>
32#include <linux/irq.h>
33#include <linux/memblock.h>
34#include <linux/of.h>
35#include <linux/of_fdt.h>
36#include <linux/libfdt.h>
37#include <linux/cpu.h>
38
39#include <asm/prom.h>
40#include <asm/rtas.h>
41#include <asm/page.h>
42#include <asm/processor.h>
43#include <asm/irq.h>
44#include <asm/io.h>
45#include <asm/kdump.h>
46#include <asm/smp.h>
47#include <asm/mmu.h>
48#include <asm/paca.h>
49#include <asm/pgtable.h>
50#include <asm/powernv.h>
51#include <asm/iommu.h>
52#include <asm/btext.h>
53#include <asm/sections.h>
54#include <asm/machdep.h>
55#include <asm/pci-bridge.h>
56#include <asm/kexec.h>
57#include <asm/opal.h>
58#include <asm/fadump.h>
59#include <asm/epapr_hcalls.h>
60#include <asm/firmware.h>
61#include <asm/dt_cpu_ftrs.h>
62#include <asm/drmem.h>
63
64#include <mm/mmu_decl.h>
65
66#ifdef DEBUG
67#define DBG(fmt...) printk(KERN_ERR fmt)
68#else
69#define DBG(fmt...)
70#endif
71
72#ifdef CONFIG_PPC64
73int __initdata iommu_is_off;
74int __initdata iommu_force_on;
75unsigned long tce_alloc_start, tce_alloc_end;
76u64 ppc64_rma_size;
77#endif
78static phys_addr_t first_memblock_size;
79static int __initdata boot_cpu_count;
80
81static int __init early_parse_mem(char *p)
82{
83 if (!p)
84 return 1;
85
86 memory_limit = PAGE_ALIGN(memparse(p, &p));
87 DBG("memory limit = 0x%llx\n", memory_limit);
88
89 return 0;
90}
91early_param("mem", early_parse_mem);
92
93/*
94 * overlaps_initrd - check for overlap with page aligned extension of
95 * initrd.
96 */
97static inline int overlaps_initrd(unsigned long start, unsigned long size)
98{
99#ifdef CONFIG_BLK_DEV_INITRD
100 if (!initrd_start)
101 return 0;
102
103 return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
104 start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
105#else
106 return 0;
107#endif
108}
109
110/**
111 * move_device_tree - move tree to an unused area, if needed.
112 *
113 * The device tree may be allocated beyond our memory limit, or inside the
114 * crash kernel region for kdump, or within the page aligned range of initrd.
115 * If so, move it out of the way.
116 */
117static void __init move_device_tree(void)
118{
119 unsigned long start, size;
120 void *p;
121
122 DBG("-> move_device_tree\n");
123
124 start = __pa(initial_boot_params);
125 size = fdt_totalsize(initial_boot_params);
126
127 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
128 overlaps_crashkernel(start, size) ||
129 overlaps_initrd(start, size)) {
130 p = __va(memblock_alloc(size, PAGE_SIZE));
131 memcpy(p, initial_boot_params, size);
132 initial_boot_params = p;
133 DBG("Moved device tree to 0x%p\n", p);
134 }
135
136 DBG("<- move_device_tree\n");
137}
138
139/*
140 * ibm,pa-features is a per-cpu property that contains a string of
141 * attribute descriptors, each of which has a 2 byte header plus up
142 * to 254 bytes worth of processor attribute bits. First header
143 * byte specifies the number of bytes following the header.
144 * Second header byte is an "attribute-specifier" type, of which
145 * zero is the only currently-defined value.
146 * Implementation: Pass in the byte and bit offset for the feature
147 * that we are interested in. The function will return -1 if the
148 * pa-features property is missing, or a 1/0 to indicate if the feature
149 * is supported/not supported. Note that the bit numbers are
150 * big-endian to match the definition in PAPR.
151 */
152static struct ibm_pa_feature {
153 unsigned long cpu_features; /* CPU_FTR_xxx bit */
154 unsigned long mmu_features; /* MMU_FTR_xxx bit */
155 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
156 unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */
157 unsigned char pabyte; /* byte number in ibm,pa-features */
158 unsigned char pabit; /* bit number (big-endian) */
159 unsigned char invert; /* if 1, pa bit set => clear feature */
160} ibm_pa_features[] __initdata = {
161 { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU },
162 { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU },
163 { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
164 { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
165 { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
166#ifdef CONFIG_PPC_RADIX_MMU
167 { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX },
168#endif
169 { .pabyte = 1, .pabit = 1, .invert = 1, .cpu_features = CPU_FTR_NODSISRALIGN },
170 { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
171 .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
172 /*
173 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
174 * we don't want to turn on TM here, so we use the *_COMP versions
175 * which are 0 if the kernel doesn't support TM.
176 */
177 { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
178 .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
179};
180
181static void __init scan_features(unsigned long node, const unsigned char *ftrs,
182 unsigned long tablelen,
183 struct ibm_pa_feature *fp,
184 unsigned long ft_size)
185{
186 unsigned long i, len, bit;
187
188 /* find descriptor with type == 0 */
189 for (;;) {
190 if (tablelen < 3)
191 return;
192 len = 2 + ftrs[0];
193 if (tablelen < len)
194 return; /* descriptor 0 not found */
195 if (ftrs[1] == 0)
196 break;
197 tablelen -= len;
198 ftrs += len;
199 }
200
201 /* loop over bits we know about */
202 for (i = 0; i < ft_size; ++i, ++fp) {
203 if (fp->pabyte >= ftrs[0])
204 continue;
205 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
206 if (bit ^ fp->invert) {
207 cur_cpu_spec->cpu_features |= fp->cpu_features;
208 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
209 cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
210 cur_cpu_spec->mmu_features |= fp->mmu_features;
211 } else {
212 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
213 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
214 cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
215 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
216 }
217 }
218}
219
220static void __init check_cpu_pa_features(unsigned long node)
221{
222 const unsigned char *pa_ftrs;
223 int tablelen;
224
225 pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
226 if (pa_ftrs == NULL)
227 return;
228
229 scan_features(node, pa_ftrs, tablelen,
230 ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
231}
232
233#ifdef CONFIG_PPC_BOOK3S_64
234static void __init init_mmu_slb_size(unsigned long node)
235{
236 const __be32 *slb_size_ptr;
237
238 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
239 of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
240
241 if (slb_size_ptr)
242 mmu_slb_size = be32_to_cpup(slb_size_ptr);
243}
244#else
245#define init_mmu_slb_size(node) do { } while(0)
246#endif
247
248static struct feature_property {
249 const char *name;
250 u32 min_value;
251 unsigned long cpu_feature;
252 unsigned long cpu_user_ftr;
253} feature_properties[] __initdata = {
254#ifdef CONFIG_ALTIVEC
255 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
256 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
257#endif /* CONFIG_ALTIVEC */
258#ifdef CONFIG_VSX
259 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
260 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
261#endif /* CONFIG_VSX */
262#ifdef CONFIG_PPC64
263 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
264 {"ibm,purr", 1, CPU_FTR_PURR, 0},
265 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
266#endif /* CONFIG_PPC64 */
267};
268
269#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
270static inline void identical_pvr_fixup(unsigned long node)
271{
272 unsigned int pvr;
273 const char *model = of_get_flat_dt_prop(node, "model", NULL);
274
275 /*
276 * Since 440GR(x)/440EP(x) processors have the same pvr,
277 * we check the node path and set bit 28 in the cur_cpu_spec
278 * pvr for EP(x) processor version. This bit is always 0 in
279 * the "real" pvr. Then we call identify_cpu again with
280 * the new logical pvr to enable FPU support.
281 */
282 if (model && strstr(model, "440EP")) {
283 pvr = cur_cpu_spec->pvr_value | 0x8;
284 identify_cpu(0, pvr);
285 DBG("Using logical pvr %x for %s\n", pvr, model);
286 }
287}
288#else
289#define identical_pvr_fixup(node) do { } while(0)
290#endif
291
292static void __init check_cpu_feature_properties(unsigned long node)
293{
294 int i;
295 struct feature_property *fp = feature_properties;
296 const __be32 *prop;
297
298 for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) {
299 prop = of_get_flat_dt_prop(node, fp->name, NULL);
300 if (prop && be32_to_cpup(prop) >= fp->min_value) {
301 cur_cpu_spec->cpu_features |= fp->cpu_feature;
302 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
303 }
304 }
305}
306
307static int __init early_init_dt_scan_cpus(unsigned long node,
308 const char *uname, int depth,
309 void *data)
310{
311 const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
312 const __be32 *prop;
313 const __be32 *intserv;
314 int i, nthreads;
315 int len;
316 int found = -1;
317 int found_thread = 0;
318
319 /* We are scanning "cpu" nodes only */
320 if (type == NULL || strcmp(type, "cpu") != 0)
321 return 0;
322
323 /* Get physical cpuid */
324 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
325 if (!intserv)
326 intserv = of_get_flat_dt_prop(node, "reg", &len);
327
328 nthreads = len / sizeof(int);
329
330 /*
331 * Now see if any of these threads match our boot cpu.
332 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
333 */
334 for (i = 0; i < nthreads; i++) {
335 /*
336 * version 2 of the kexec param format adds the phys cpuid of
337 * booted proc.
338 */
339 if (fdt_version(initial_boot_params) >= 2) {
340 if (be32_to_cpu(intserv[i]) ==
341 fdt_boot_cpuid_phys(initial_boot_params)) {
342 found = boot_cpu_count;
343 found_thread = i;
344 }
345 } else {
346 /*
347 * Check if it's the boot-cpu, set it's hw index now,
348 * unfortunately this format did not support booting
349 * off secondary threads.
350 */
351 if (of_get_flat_dt_prop(node,
352 "linux,boot-cpu", NULL) != NULL)
353 found = boot_cpu_count;
354 }
355#ifdef CONFIG_SMP
356 /* logical cpu id is always 0 on UP kernels */
357 boot_cpu_count++;
358#endif
359 }
360
361 /* Not the boot CPU */
362 if (found < 0)
363 return 0;
364
365 DBG("boot cpu: logical %d physical %d\n", found,
366 be32_to_cpu(intserv[found_thread]));
367 boot_cpuid = found;
368
369 /*
370 * PAPR defines "logical" PVR values for cpus that
371 * meet various levels of the architecture:
372 * 0x0f000001 Architecture version 2.04
373 * 0x0f000002 Architecture version 2.05
374 * If the cpu-version property in the cpu node contains
375 * such a value, we call identify_cpu again with the
376 * logical PVR value in order to use the cpu feature
377 * bits appropriate for the architecture level.
378 *
379 * A POWER6 partition in "POWER6 architected" mode
380 * uses the 0x0f000002 PVR value; in POWER5+ mode
381 * it uses 0x0f000001.
382 *
383 * If we're using device tree CPU feature discovery then we don't
384 * support the cpu-version property, and it's the responsibility of the
385 * firmware/hypervisor to provide the correct feature set for the
386 * architecture level via the ibm,powerpc-cpu-features binding.
387 */
388 if (!dt_cpu_ftrs_in_use()) {
389 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
390 if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
391 identify_cpu(0, be32_to_cpup(prop));
392
393 check_cpu_feature_properties(node);
394 check_cpu_pa_features(node);
395 }
396
397 identical_pvr_fixup(node);
398 init_mmu_slb_size(node);
399
400#ifdef CONFIG_PPC64
401 if (nthreads == 1)
402 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
403 else if (!dt_cpu_ftrs_in_use())
404 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
405 allocate_paca(boot_cpuid);
406#endif
407 set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
408
409 return 0;
410}
411
412static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
413 const char *uname,
414 int depth, void *data)
415{
416 const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
417
418 /* Use common scan routine to determine if this is the chosen node */
419 if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
420 return 0;
421
422#ifdef CONFIG_PPC64
423 /* check if iommu is forced on or off */
424 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
425 iommu_is_off = 1;
426 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
427 iommu_force_on = 1;
428#endif
429
430 /* mem=x on the command line is the preferred mechanism */
431 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
432 if (lprop)
433 memory_limit = *lprop;
434
435#ifdef CONFIG_PPC64
436 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
437 if (lprop)
438 tce_alloc_start = *lprop;
439 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
440 if (lprop)
441 tce_alloc_end = *lprop;
442#endif
443
444#ifdef CONFIG_KEXEC_CORE
445 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
446 if (lprop)
447 crashk_res.start = *lprop;
448
449 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
450 if (lprop)
451 crashk_res.end = crashk_res.start + *lprop - 1;
452#endif
453
454 /* break now */
455 return 1;
456}
457
458#ifdef CONFIG_PPC_PSERIES
459/*
460 * Interpret the ibm dynamic reconfiguration memory LMBs.
461 * This contains a list of memory blocks along with NUMA affinity
462 * information.
463 */
464static void __init early_init_drmem_lmb(struct drmem_lmb *lmb,
465 const __be32 **usm)
466{
467 u64 base, size;
468 int is_kexec_kdump = 0, rngs;
469
470 base = lmb->base_addr;
471 size = drmem_lmb_size();
472 rngs = 1;
473
474 /*
475 * Skip this block if the reserved bit is set in flags
476 * or if the block is not assigned to this partition.
477 */
478 if ((lmb->flags & DRCONF_MEM_RESERVED) ||
479 !(lmb->flags & DRCONF_MEM_ASSIGNED))
480 return;
481
482 if (*usm)
483 is_kexec_kdump = 1;
484
485 if (is_kexec_kdump) {
486 /*
487 * For each memblock in ibm,dynamic-memory, a
488 * corresponding entry in linux,drconf-usable-memory
489 * property contains a counter 'p' followed by 'p'
490 * (base, size) duple. Now read the counter from
491 * linux,drconf-usable-memory property
492 */
493 rngs = dt_mem_next_cell(dt_root_size_cells, usm);
494 if (!rngs) /* there are no (base, size) duple */
495 return;
496 }
497
498 do {
499 if (is_kexec_kdump) {
500 base = dt_mem_next_cell(dt_root_addr_cells, usm);
501 size = dt_mem_next_cell(dt_root_size_cells, usm);
502 }
503
504 if (iommu_is_off) {
505 if (base >= 0x80000000ul)
506 continue;
507 if ((base + size) > 0x80000000ul)
508 size = 0x80000000ul - base;
509 }
510
511 DBG("Adding: %llx -> %llx\n", base, size);
512 memblock_add(base, size);
513 } while (--rngs);
514}
515#endif /* CONFIG_PPC_PSERIES */
516
517static int __init early_init_dt_scan_memory_ppc(unsigned long node,
518 const char *uname,
519 int depth, void *data)
520{
521#ifdef CONFIG_PPC_PSERIES
522 if (depth == 1 &&
523 strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) {
524 walk_drmem_lmbs_early(node, early_init_drmem_lmb);
525 return 0;
526 }
527#endif
528
529 return early_init_dt_scan_memory(node, uname, depth, data);
530}
531
532/*
533 * For a relocatable kernel, we need to get the memstart_addr first,
534 * then use it to calculate the virtual kernel start address. This has
535 * to happen at a very early stage (before machine_init). In this case,
536 * we just want to get the memstart_address and would not like to mess the
537 * memblock at this stage. So introduce a variable to skip the memblock_add()
538 * for this reason.
539 */
540#ifdef CONFIG_RELOCATABLE
541static int add_mem_to_memblock = 1;
542#else
543#define add_mem_to_memblock 1
544#endif
545
546void __init early_init_dt_add_memory_arch(u64 base, u64 size)
547{
548#ifdef CONFIG_PPC64
549 if (iommu_is_off) {
550 if (base >= 0x80000000ul)
551 return;
552 if ((base + size) > 0x80000000ul)
553 size = 0x80000000ul - base;
554 }
555#endif
556 /* Keep track of the beginning of memory -and- the size of
557 * the very first block in the device-tree as it represents
558 * the RMA on ppc64 server
559 */
560 if (base < memstart_addr) {
561 memstart_addr = base;
562 first_memblock_size = size;
563 }
564
565 /* Add the chunk to the MEMBLOCK list */
566 if (add_mem_to_memblock)
567 memblock_add(base, size);
568}
569
570static void __init early_reserve_mem_dt(void)
571{
572 unsigned long i, dt_root;
573 int len;
574 const __be32 *prop;
575
576 early_init_fdt_reserve_self();
577 early_init_fdt_scan_reserved_mem();
578
579 dt_root = of_get_flat_dt_root();
580
581 prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
582
583 if (!prop)
584 return;
585
586 DBG("Found new-style reserved-ranges\n");
587
588 /* Each reserved range is an (address,size) pair, 2 cells each,
589 * totalling 4 cells per range. */
590 for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
591 u64 base, size;
592
593 base = of_read_number(prop + (i * 4) + 0, 2);
594 size = of_read_number(prop + (i * 4) + 2, 2);
595
596 if (size) {
597 DBG("reserving: %llx -> %llx\n", base, size);
598 memblock_reserve(base, size);
599 }
600 }
601}
602
603static void __init early_reserve_mem(void)
604{
605 __be64 *reserve_map;
606
607 reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
608 fdt_off_mem_rsvmap(initial_boot_params));
609
610 /* Look for the new "reserved-regions" property in the DT */
611 early_reserve_mem_dt();
612
613#ifdef CONFIG_BLK_DEV_INITRD
614 /* Then reserve the initrd, if any */
615 if (initrd_start && (initrd_end > initrd_start)) {
616 memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
617 _ALIGN_UP(initrd_end, PAGE_SIZE) -
618 _ALIGN_DOWN(initrd_start, PAGE_SIZE));
619 }
620#endif /* CONFIG_BLK_DEV_INITRD */
621
622#ifdef CONFIG_PPC32
623 /*
624 * Handle the case where we might be booting from an old kexec
625 * image that setup the mem_rsvmap as pairs of 32-bit values
626 */
627 if (be64_to_cpup(reserve_map) > 0xffffffffull) {
628 u32 base_32, size_32;
629 __be32 *reserve_map_32 = (__be32 *)reserve_map;
630
631 DBG("Found old 32-bit reserve map\n");
632
633 while (1) {
634 base_32 = be32_to_cpup(reserve_map_32++);
635 size_32 = be32_to_cpup(reserve_map_32++);
636 if (size_32 == 0)
637 break;
638 DBG("reserving: %x -> %x\n", base_32, size_32);
639 memblock_reserve(base_32, size_32);
640 }
641 return;
642 }
643#endif
644}
645
646#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
647static bool tm_disabled __initdata;
648
649static int __init parse_ppc_tm(char *str)
650{
651 bool res;
652
653 if (kstrtobool(str, &res))
654 return -EINVAL;
655
656 tm_disabled = !res;
657
658 return 0;
659}
660early_param("ppc_tm", parse_ppc_tm);
661
662static void __init tm_init(void)
663{
664 if (tm_disabled) {
665 pr_info("Disabling hardware transactional memory (HTM)\n");
666 cur_cpu_spec->cpu_user_features2 &=
667 ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM);
668 cur_cpu_spec->cpu_features &= ~CPU_FTR_TM;
669 return;
670 }
671
672 pnv_tm_init();
673}
674#else
675static void tm_init(void) { }
676#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
677
678void __init early_init_devtree(void *params)
679{
680 phys_addr_t limit;
681
682 DBG(" -> early_init_devtree(%p)\n", params);
683
684 /* Too early to BUG_ON(), do it by hand */
685 if (!early_init_dt_verify(params))
686 panic("BUG: Failed verifying flat device tree, bad version?");
687
688#ifdef CONFIG_PPC_RTAS
689 /* Some machines might need RTAS info for debugging, grab it now. */
690 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
691#endif
692
693#ifdef CONFIG_PPC_POWERNV
694 /* Some machines might need OPAL info for debugging, grab it now. */
695 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
696#endif
697
698#ifdef CONFIG_FA_DUMP
699 /* scan tree to see if dump is active during last boot */
700 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
701#endif
702
703 /* Retrieve various informations from the /chosen node of the
704 * device-tree, including the platform type, initrd location and
705 * size, TCE reserve, and more ...
706 */
707 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
708
709 /* Scan memory nodes and rebuild MEMBLOCKs */
710 of_scan_flat_dt(early_init_dt_scan_root, NULL);
711 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
712
713 parse_early_param();
714
715 /* make sure we've parsed cmdline for mem= before this */
716 if (memory_limit)
717 first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
718 setup_initial_memory_limit(memstart_addr, first_memblock_size);
719 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
720 memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
721 /* If relocatable, reserve first 32k for interrupt vectors etc. */
722 if (PHYSICAL_START > MEMORY_START)
723 memblock_reserve(MEMORY_START, 0x8000);
724 reserve_kdump_trampoline();
725#ifdef CONFIG_FA_DUMP
726 /*
727 * If we fail to reserve memory for firmware-assisted dump then
728 * fallback to kexec based kdump.
729 */
730 if (fadump_reserve_mem() == 0)
731#endif
732 reserve_crashkernel();
733 early_reserve_mem();
734
735 /* Ensure that total memory size is page-aligned. */
736 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
737 memblock_enforce_memory_limit(limit);
738
739 memblock_allow_resize();
740 memblock_dump_all();
741
742 DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
743
744 /* We may need to relocate the flat tree, do it now.
745 * FIXME .. and the initrd too? */
746 move_device_tree();
747
748 allocate_paca_ptrs();
749
750 DBG("Scanning CPUs ...\n");
751
752 dt_cpu_ftrs_scan();
753
754 /* Retrieve CPU related informations from the flat tree
755 * (altivec support, boot CPU ID, ...)
756 */
757 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
758 if (boot_cpuid < 0) {
759 printk("Failed to identify boot CPU !\n");
760 BUG();
761 }
762
763#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
764 /* We'll later wait for secondaries to check in; there are
765 * NCPUS-1 non-boot CPUs :-)
766 */
767 spinning_secondaries = boot_cpu_count - 1;
768#endif
769
770 mmu_early_init_devtree();
771
772#ifdef CONFIG_PPC_POWERNV
773 /* Scan and build the list of machine check recoverable ranges */
774 of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
775#endif
776 epapr_paravirt_early_init();
777
778 /* Now try to figure out if we are running on LPAR and so on */
779 pseries_probe_fw_features();
780
781#ifdef CONFIG_PPC_PS3
782 /* Identify PS3 firmware */
783 if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3"))
784 powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
785#endif
786
787 tm_init();
788
789 DBG(" <- early_init_devtree()\n");
790}
791
792#ifdef CONFIG_RELOCATABLE
793/*
794 * This function run before early_init_devtree, so we have to init
795 * initial_boot_params.
796 */
797void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
798{
799 /* Setup flat device-tree pointer */
800 initial_boot_params = params;
801
802 /*
803 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
804 * mess the memblock.
805 */
806 add_mem_to_memblock = 0;
807 of_scan_flat_dt(early_init_dt_scan_root, NULL);
808 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
809 add_mem_to_memblock = 1;
810
811 if (size)
812 *size = first_memblock_size;
813}
814#endif
815
816/*******
817 *
818 * New implementation of the OF "find" APIs, return a refcounted
819 * object, call of_node_put() when done. The device tree and list
820 * are protected by a rw_lock.
821 *
822 * Note that property management will need some locking as well,
823 * this isn't dealt with yet.
824 *
825 *******/
826
827/**
828 * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
829 * @np: device node of the device
830 *
831 * This looks for a property "ibm,chip-id" in the node or any
832 * of its parents and returns its content, or -1 if it cannot
833 * be found.
834 */
835int of_get_ibm_chip_id(struct device_node *np)
836{
837 of_node_get(np);
838 while (np) {
839 u32 chip_id;
840
841 /*
842 * Skiboot may produce memory nodes that contain more than one
843 * cell in chip-id, we only read the first one here.
844 */
845 if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
846 of_node_put(np);
847 return chip_id;
848 }
849
850 np = of_get_next_parent(np);
851 }
852 return -1;
853}
854EXPORT_SYMBOL(of_get_ibm_chip_id);
855
856/**
857 * cpu_to_chip_id - Return the cpus chip-id
858 * @cpu: The logical cpu number.
859 *
860 * Return the value of the ibm,chip-id property corresponding to the given
861 * logical cpu number. If the chip-id can not be found, returns -1.
862 */
863int cpu_to_chip_id(int cpu)
864{
865 struct device_node *np;
866
867 np = of_get_cpu_node(cpu, NULL);
868 if (!np)
869 return -1;
870
871 of_node_put(np);
872 return of_get_ibm_chip_id(np);
873}
874EXPORT_SYMBOL(cpu_to_chip_id);
875
876bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
877{
878#ifdef CONFIG_SMP
879 /*
880 * Early firmware scanning must use this rather than
881 * get_hard_smp_processor_id because we don't have pacas allocated
882 * until memory topology is discovered.
883 */
884 if (cpu_to_phys_id != NULL)
885 return (int)phys_id == cpu_to_phys_id[cpu];
886#endif
887
888 return (int)phys_id == get_hard_smp_processor_id(cpu);
889}
1/*
2 * Procedures for creating, accessing and interpreting the device tree.
3 *
4 * Paul Mackerras August 1996.
5 * Copyright (C) 1996-2005 Paul Mackerras.
6 *
7 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
8 * {engebret|bergner}@us.ibm.com
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 */
15
16#undef DEBUG
17
18#include <stdarg.h>
19#include <linux/kernel.h>
20#include <linux/string.h>
21#include <linux/init.h>
22#include <linux/threads.h>
23#include <linux/spinlock.h>
24#include <linux/types.h>
25#include <linux/pci.h>
26#include <linux/stringify.h>
27#include <linux/delay.h>
28#include <linux/initrd.h>
29#include <linux/bitops.h>
30#include <linux/export.h>
31#include <linux/kexec.h>
32#include <linux/debugfs.h>
33#include <linux/irq.h>
34#include <linux/memblock.h>
35#include <linux/of.h>
36#include <linux/of_fdt.h>
37
38#include <asm/prom.h>
39#include <asm/rtas.h>
40#include <asm/page.h>
41#include <asm/processor.h>
42#include <asm/irq.h>
43#include <asm/io.h>
44#include <asm/kdump.h>
45#include <asm/smp.h>
46#include <asm/mmu.h>
47#include <asm/paca.h>
48#include <asm/pgtable.h>
49#include <asm/pci.h>
50#include <asm/iommu.h>
51#include <asm/btext.h>
52#include <asm/sections.h>
53#include <asm/machdep.h>
54#include <asm/pci-bridge.h>
55#include <asm/kexec.h>
56#include <asm/opal.h>
57#include <asm/fadump.h>
58#include <asm/debug.h>
59
60#include <mm/mmu_decl.h>
61
62#ifdef DEBUG
63#define DBG(fmt...) printk(KERN_ERR fmt)
64#else
65#define DBG(fmt...)
66#endif
67
68#ifdef CONFIG_PPC64
69int __initdata iommu_is_off;
70int __initdata iommu_force_on;
71unsigned long tce_alloc_start, tce_alloc_end;
72u64 ppc64_rma_size;
73#endif
74static phys_addr_t first_memblock_size;
75static int __initdata boot_cpu_count;
76
77static int __init early_parse_mem(char *p)
78{
79 if (!p)
80 return 1;
81
82 memory_limit = PAGE_ALIGN(memparse(p, &p));
83 DBG("memory limit = 0x%llx\n", memory_limit);
84
85 return 0;
86}
87early_param("mem", early_parse_mem);
88
89/*
90 * overlaps_initrd - check for overlap with page aligned extension of
91 * initrd.
92 */
93static inline int overlaps_initrd(unsigned long start, unsigned long size)
94{
95#ifdef CONFIG_BLK_DEV_INITRD
96 if (!initrd_start)
97 return 0;
98
99 return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
100 start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
101#else
102 return 0;
103#endif
104}
105
106/**
107 * move_device_tree - move tree to an unused area, if needed.
108 *
109 * The device tree may be allocated beyond our memory limit, or inside the
110 * crash kernel region for kdump, or within the page aligned range of initrd.
111 * If so, move it out of the way.
112 */
113static void __init move_device_tree(void)
114{
115 unsigned long start, size;
116 void *p;
117
118 DBG("-> move_device_tree\n");
119
120 start = __pa(initial_boot_params);
121 size = be32_to_cpu(initial_boot_params->totalsize);
122
123 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
124 overlaps_crashkernel(start, size) ||
125 overlaps_initrd(start, size)) {
126 p = __va(memblock_alloc(size, PAGE_SIZE));
127 memcpy(p, initial_boot_params, size);
128 initial_boot_params = (struct boot_param_header *)p;
129 DBG("Moved device tree to 0x%p\n", p);
130 }
131
132 DBG("<- move_device_tree\n");
133}
134
135/*
136 * ibm,pa-features is a per-cpu property that contains a string of
137 * attribute descriptors, each of which has a 2 byte header plus up
138 * to 254 bytes worth of processor attribute bits. First header
139 * byte specifies the number of bytes following the header.
140 * Second header byte is an "attribute-specifier" type, of which
141 * zero is the only currently-defined value.
142 * Implementation: Pass in the byte and bit offset for the feature
143 * that we are interested in. The function will return -1 if the
144 * pa-features property is missing, or a 1/0 to indicate if the feature
145 * is supported/not supported. Note that the bit numbers are
146 * big-endian to match the definition in PAPR.
147 */
148static struct ibm_pa_feature {
149 unsigned long cpu_features; /* CPU_FTR_xxx bit */
150 unsigned long mmu_features; /* MMU_FTR_xxx bit */
151 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
152 unsigned char pabyte; /* byte number in ibm,pa-features */
153 unsigned char pabit; /* bit number (big-endian) */
154 unsigned char invert; /* if 1, pa bit set => clear feature */
155} ibm_pa_features[] __initdata = {
156 {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0},
157 {0, 0, PPC_FEATURE_HAS_FPU, 0, 1, 0},
158 {0, MMU_FTR_SLB, 0, 0, 2, 0},
159 {CPU_FTR_CTRL, 0, 0, 0, 3, 0},
160 {CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0},
161 {CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1},
162 {0, MMU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0},
163 {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
164};
165
166static void __init scan_features(unsigned long node, unsigned char *ftrs,
167 unsigned long tablelen,
168 struct ibm_pa_feature *fp,
169 unsigned long ft_size)
170{
171 unsigned long i, len, bit;
172
173 /* find descriptor with type == 0 */
174 for (;;) {
175 if (tablelen < 3)
176 return;
177 len = 2 + ftrs[0];
178 if (tablelen < len)
179 return; /* descriptor 0 not found */
180 if (ftrs[1] == 0)
181 break;
182 tablelen -= len;
183 ftrs += len;
184 }
185
186 /* loop over bits we know about */
187 for (i = 0; i < ft_size; ++i, ++fp) {
188 if (fp->pabyte >= ftrs[0])
189 continue;
190 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
191 if (bit ^ fp->invert) {
192 cur_cpu_spec->cpu_features |= fp->cpu_features;
193 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
194 cur_cpu_spec->mmu_features |= fp->mmu_features;
195 } else {
196 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
197 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
198 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
199 }
200 }
201}
202
203static void __init check_cpu_pa_features(unsigned long node)
204{
205 unsigned char *pa_ftrs;
206 unsigned long tablelen;
207
208 pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
209 if (pa_ftrs == NULL)
210 return;
211
212 scan_features(node, pa_ftrs, tablelen,
213 ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
214}
215
216#ifdef CONFIG_PPC_STD_MMU_64
217static void __init check_cpu_slb_size(unsigned long node)
218{
219 __be32 *slb_size_ptr;
220
221 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
222 if (slb_size_ptr != NULL) {
223 mmu_slb_size = be32_to_cpup(slb_size_ptr);
224 return;
225 }
226 slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
227 if (slb_size_ptr != NULL) {
228 mmu_slb_size = be32_to_cpup(slb_size_ptr);
229 }
230}
231#else
232#define check_cpu_slb_size(node) do { } while(0)
233#endif
234
235static struct feature_property {
236 const char *name;
237 u32 min_value;
238 unsigned long cpu_feature;
239 unsigned long cpu_user_ftr;
240} feature_properties[] __initdata = {
241#ifdef CONFIG_ALTIVEC
242 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
243 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
244#endif /* CONFIG_ALTIVEC */
245#ifdef CONFIG_VSX
246 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
247 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
248#endif /* CONFIG_VSX */
249#ifdef CONFIG_PPC64
250 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
251 {"ibm,purr", 1, CPU_FTR_PURR, 0},
252 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
253#endif /* CONFIG_PPC64 */
254};
255
256#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
257static inline void identical_pvr_fixup(unsigned long node)
258{
259 unsigned int pvr;
260 char *model = of_get_flat_dt_prop(node, "model", NULL);
261
262 /*
263 * Since 440GR(x)/440EP(x) processors have the same pvr,
264 * we check the node path and set bit 28 in the cur_cpu_spec
265 * pvr for EP(x) processor version. This bit is always 0 in
266 * the "real" pvr. Then we call identify_cpu again with
267 * the new logical pvr to enable FPU support.
268 */
269 if (model && strstr(model, "440EP")) {
270 pvr = cur_cpu_spec->pvr_value | 0x8;
271 identify_cpu(0, pvr);
272 DBG("Using logical pvr %x for %s\n", pvr, model);
273 }
274}
275#else
276#define identical_pvr_fixup(node) do { } while(0)
277#endif
278
279static void __init check_cpu_feature_properties(unsigned long node)
280{
281 unsigned long i;
282 struct feature_property *fp = feature_properties;
283 const __be32 *prop;
284
285 for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
286 prop = of_get_flat_dt_prop(node, fp->name, NULL);
287 if (prop && be32_to_cpup(prop) >= fp->min_value) {
288 cur_cpu_spec->cpu_features |= fp->cpu_feature;
289 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
290 }
291 }
292}
293
294static int __init early_init_dt_scan_cpus(unsigned long node,
295 const char *uname, int depth,
296 void *data)
297{
298 char *type = of_get_flat_dt_prop(node, "device_type", NULL);
299 const __be32 *prop;
300 const __be32 *intserv;
301 int i, nthreads;
302 unsigned long len;
303 int found = -1;
304 int found_thread = 0;
305
306 /* We are scanning "cpu" nodes only */
307 if (type == NULL || strcmp(type, "cpu") != 0)
308 return 0;
309
310 /* Get physical cpuid */
311 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
312 if (intserv) {
313 nthreads = len / sizeof(int);
314 } else {
315 intserv = of_get_flat_dt_prop(node, "reg", NULL);
316 nthreads = 1;
317 }
318
319 /*
320 * Now see if any of these threads match our boot cpu.
321 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
322 */
323 for (i = 0; i < nthreads; i++) {
324 /*
325 * version 2 of the kexec param format adds the phys cpuid of
326 * booted proc.
327 */
328 if (be32_to_cpu(initial_boot_params->version) >= 2) {
329 if (be32_to_cpu(intserv[i]) ==
330 be32_to_cpu(initial_boot_params->boot_cpuid_phys)) {
331 found = boot_cpu_count;
332 found_thread = i;
333 }
334 } else {
335 /*
336 * Check if it's the boot-cpu, set it's hw index now,
337 * unfortunately this format did not support booting
338 * off secondary threads.
339 */
340 if (of_get_flat_dt_prop(node,
341 "linux,boot-cpu", NULL) != NULL)
342 found = boot_cpu_count;
343 }
344#ifdef CONFIG_SMP
345 /* logical cpu id is always 0 on UP kernels */
346 boot_cpu_count++;
347#endif
348 }
349
350 /* Not the boot CPU */
351 if (found < 0)
352 return 0;
353
354 DBG("boot cpu: logical %d physical %d\n", found,
355 be32_to_cpu(intserv[found_thread]));
356 boot_cpuid = found;
357 set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
358
359 /*
360 * PAPR defines "logical" PVR values for cpus that
361 * meet various levels of the architecture:
362 * 0x0f000001 Architecture version 2.04
363 * 0x0f000002 Architecture version 2.05
364 * If the cpu-version property in the cpu node contains
365 * such a value, we call identify_cpu again with the
366 * logical PVR value in order to use the cpu feature
367 * bits appropriate for the architecture level.
368 *
369 * A POWER6 partition in "POWER6 architected" mode
370 * uses the 0x0f000002 PVR value; in POWER5+ mode
371 * it uses 0x0f000001.
372 */
373 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
374 if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
375 identify_cpu(0, be32_to_cpup(prop));
376
377 identical_pvr_fixup(node);
378
379 check_cpu_feature_properties(node);
380 check_cpu_pa_features(node);
381 check_cpu_slb_size(node);
382
383#ifdef CONFIG_PPC64
384 if (nthreads > 1)
385 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
386 else
387 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
388#endif
389 return 0;
390}
391
392int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname,
393 int depth, void *data)
394{
395 unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
396
397 /* Use common scan routine to determine if this is the chosen node */
398 if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
399 return 0;
400
401#ifdef CONFIG_PPC64
402 /* check if iommu is forced on or off */
403 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
404 iommu_is_off = 1;
405 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
406 iommu_force_on = 1;
407#endif
408
409 /* mem=x on the command line is the preferred mechanism */
410 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
411 if (lprop)
412 memory_limit = *lprop;
413
414#ifdef CONFIG_PPC64
415 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
416 if (lprop)
417 tce_alloc_start = *lprop;
418 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
419 if (lprop)
420 tce_alloc_end = *lprop;
421#endif
422
423#ifdef CONFIG_KEXEC
424 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
425 if (lprop)
426 crashk_res.start = *lprop;
427
428 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
429 if (lprop)
430 crashk_res.end = crashk_res.start + *lprop - 1;
431#endif
432
433 /* break now */
434 return 1;
435}
436
437#ifdef CONFIG_PPC_PSERIES
438/*
439 * Interpret the ibm,dynamic-memory property in the
440 * /ibm,dynamic-reconfiguration-memory node.
441 * This contains a list of memory blocks along with NUMA affinity
442 * information.
443 */
444static int __init early_init_dt_scan_drconf_memory(unsigned long node)
445{
446 __be32 *dm, *ls, *usm;
447 unsigned long l, n, flags;
448 u64 base, size, memblock_size;
449 unsigned int is_kexec_kdump = 0, rngs;
450
451 ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
452 if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
453 return 0;
454 memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
455
456 dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
457 if (dm == NULL || l < sizeof(__be32))
458 return 0;
459
460 n = of_read_number(dm++, 1); /* number of entries */
461 if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
462 return 0;
463
464 /* check if this is a kexec/kdump kernel. */
465 usm = of_get_flat_dt_prop(node, "linux,drconf-usable-memory",
466 &l);
467 if (usm != NULL)
468 is_kexec_kdump = 1;
469
470 for (; n != 0; --n) {
471 base = dt_mem_next_cell(dt_root_addr_cells, &dm);
472 flags = of_read_number(&dm[3], 1);
473 /* skip DRC index, pad, assoc. list index, flags */
474 dm += 4;
475 /* skip this block if the reserved bit is set in flags (0x80)
476 or if the block is not assigned to this partition (0x8) */
477 if ((flags & 0x80) || !(flags & 0x8))
478 continue;
479 size = memblock_size;
480 rngs = 1;
481 if (is_kexec_kdump) {
482 /*
483 * For each memblock in ibm,dynamic-memory, a corresponding
484 * entry in linux,drconf-usable-memory property contains
485 * a counter 'p' followed by 'p' (base, size) duple.
486 * Now read the counter from
487 * linux,drconf-usable-memory property
488 */
489 rngs = dt_mem_next_cell(dt_root_size_cells, &usm);
490 if (!rngs) /* there are no (base, size) duple */
491 continue;
492 }
493 do {
494 if (is_kexec_kdump) {
495 base = dt_mem_next_cell(dt_root_addr_cells,
496 &usm);
497 size = dt_mem_next_cell(dt_root_size_cells,
498 &usm);
499 }
500 if (iommu_is_off) {
501 if (base >= 0x80000000ul)
502 continue;
503 if ((base + size) > 0x80000000ul)
504 size = 0x80000000ul - base;
505 }
506 memblock_add(base, size);
507 } while (--rngs);
508 }
509 memblock_dump_all();
510 return 0;
511}
512#else
513#define early_init_dt_scan_drconf_memory(node) 0
514#endif /* CONFIG_PPC_PSERIES */
515
516static int __init early_init_dt_scan_memory_ppc(unsigned long node,
517 const char *uname,
518 int depth, void *data)
519{
520 if (depth == 1 &&
521 strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
522 return early_init_dt_scan_drconf_memory(node);
523
524 return early_init_dt_scan_memory(node, uname, depth, data);
525}
526
527/*
528 * For a relocatable kernel, we need to get the memstart_addr first,
529 * then use it to calculate the virtual kernel start address. This has
530 * to happen at a very early stage (before machine_init). In this case,
531 * we just want to get the memstart_address and would not like to mess the
532 * memblock at this stage. So introduce a variable to skip the memblock_add()
533 * for this reason.
534 */
535#ifdef CONFIG_RELOCATABLE
536static int add_mem_to_memblock = 1;
537#else
538#define add_mem_to_memblock 1
539#endif
540
541void __init early_init_dt_add_memory_arch(u64 base, u64 size)
542{
543#ifdef CONFIG_PPC64
544 if (iommu_is_off) {
545 if (base >= 0x80000000ul)
546 return;
547 if ((base + size) > 0x80000000ul)
548 size = 0x80000000ul - base;
549 }
550#endif
551 /* Keep track of the beginning of memory -and- the size of
552 * the very first block in the device-tree as it represents
553 * the RMA on ppc64 server
554 */
555 if (base < memstart_addr) {
556 memstart_addr = base;
557 first_memblock_size = size;
558 }
559
560 /* Add the chunk to the MEMBLOCK list */
561 if (add_mem_to_memblock)
562 memblock_add(base, size);
563}
564
565static void __init early_reserve_mem_dt(void)
566{
567 unsigned long i, len, dt_root;
568 const __be32 *prop;
569
570 dt_root = of_get_flat_dt_root();
571
572 prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
573
574 if (!prop)
575 return;
576
577 DBG("Found new-style reserved-ranges\n");
578
579 /* Each reserved range is an (address,size) pair, 2 cells each,
580 * totalling 4 cells per range. */
581 for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
582 u64 base, size;
583
584 base = of_read_number(prop + (i * 4) + 0, 2);
585 size = of_read_number(prop + (i * 4) + 2, 2);
586
587 if (size) {
588 DBG("reserving: %llx -> %llx\n", base, size);
589 memblock_reserve(base, size);
590 }
591 }
592
593 early_init_fdt_scan_reserved_mem();
594}
595
596static void __init early_reserve_mem(void)
597{
598 u64 base, size;
599 __be64 *reserve_map;
600 unsigned long self_base;
601 unsigned long self_size;
602
603 reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
604 be32_to_cpu(initial_boot_params->off_mem_rsvmap));
605
606 /* before we do anything, lets reserve the dt blob */
607 self_base = __pa((unsigned long)initial_boot_params);
608 self_size = be32_to_cpu(initial_boot_params->totalsize);
609 memblock_reserve(self_base, self_size);
610
611 /* Look for the new "reserved-regions" property in the DT */
612 early_reserve_mem_dt();
613
614#ifdef CONFIG_BLK_DEV_INITRD
615 /* Then reserve the initrd, if any */
616 if (initrd_start && (initrd_end > initrd_start)) {
617 memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
618 _ALIGN_UP(initrd_end, PAGE_SIZE) -
619 _ALIGN_DOWN(initrd_start, PAGE_SIZE));
620 }
621#endif /* CONFIG_BLK_DEV_INITRD */
622
623#ifdef CONFIG_PPC32
624 /*
625 * Handle the case where we might be booting from an old kexec
626 * image that setup the mem_rsvmap as pairs of 32-bit values
627 */
628 if (be64_to_cpup(reserve_map) > 0xffffffffull) {
629 u32 base_32, size_32;
630 __be32 *reserve_map_32 = (__be32 *)reserve_map;
631
632 DBG("Found old 32-bit reserve map\n");
633
634 while (1) {
635 base_32 = be32_to_cpup(reserve_map_32++);
636 size_32 = be32_to_cpup(reserve_map_32++);
637 if (size_32 == 0)
638 break;
639 /* skip if the reservation is for the blob */
640 if (base_32 == self_base && size_32 == self_size)
641 continue;
642 DBG("reserving: %x -> %x\n", base_32, size_32);
643 memblock_reserve(base_32, size_32);
644 }
645 return;
646 }
647#endif
648 DBG("Processing reserve map\n");
649
650 /* Handle the reserve map in the fdt blob if it exists */
651 while (1) {
652 base = be64_to_cpup(reserve_map++);
653 size = be64_to_cpup(reserve_map++);
654 if (size == 0)
655 break;
656 DBG("reserving: %llx -> %llx\n", base, size);
657 memblock_reserve(base, size);
658 }
659}
660
661void __init early_init_devtree(void *params)
662{
663 phys_addr_t limit;
664
665 DBG(" -> early_init_devtree(%p)\n", params);
666
667 /* Setup flat device-tree pointer */
668 initial_boot_params = params;
669
670#ifdef CONFIG_PPC_RTAS
671 /* Some machines might need RTAS info for debugging, grab it now. */
672 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
673#endif
674
675#ifdef CONFIG_PPC_POWERNV
676 /* Some machines might need OPAL info for debugging, grab it now. */
677 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
678#endif
679
680#ifdef CONFIG_FA_DUMP
681 /* scan tree to see if dump is active during last boot */
682 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
683#endif
684
685 /* Pre-initialize the cmd_line with the content of boot_commmand_line,
686 * which will be empty except when the content of the variable has
687 * been overriden by a bootloading mechanism. This happens typically
688 * with HAL takeover
689 */
690 strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
691
692 /* Retrieve various informations from the /chosen node of the
693 * device-tree, including the platform type, initrd location and
694 * size, TCE reserve, and more ...
695 */
696 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
697
698 /* Scan memory nodes and rebuild MEMBLOCKs */
699 of_scan_flat_dt(early_init_dt_scan_root, NULL);
700 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
701
702 /* Save command line for /proc/cmdline and then parse parameters */
703 strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
704 parse_early_param();
705
706 /* make sure we've parsed cmdline for mem= before this */
707 if (memory_limit)
708 first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
709 setup_initial_memory_limit(memstart_addr, first_memblock_size);
710 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
711 memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
712 /* If relocatable, reserve first 32k for interrupt vectors etc. */
713 if (PHYSICAL_START > MEMORY_START)
714 memblock_reserve(MEMORY_START, 0x8000);
715 reserve_kdump_trampoline();
716#ifdef CONFIG_FA_DUMP
717 /*
718 * If we fail to reserve memory for firmware-assisted dump then
719 * fallback to kexec based kdump.
720 */
721 if (fadump_reserve_mem() == 0)
722#endif
723 reserve_crashkernel();
724 early_reserve_mem();
725
726 /*
727 * Ensure that total memory size is page-aligned, because otherwise
728 * mark_bootmem() gets upset.
729 */
730 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
731 memblock_enforce_memory_limit(limit);
732
733 memblock_allow_resize();
734 memblock_dump_all();
735
736 DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
737
738 /* We may need to relocate the flat tree, do it now.
739 * FIXME .. and the initrd too? */
740 move_device_tree();
741
742 allocate_pacas();
743
744 DBG("Scanning CPUs ...\n");
745
746 /* Retrieve CPU related informations from the flat tree
747 * (altivec support, boot CPU ID, ...)
748 */
749 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
750 if (boot_cpuid < 0) {
751 printk("Failed to indentify boot CPU !\n");
752 BUG();
753 }
754
755#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
756 /* We'll later wait for secondaries to check in; there are
757 * NCPUS-1 non-boot CPUs :-)
758 */
759 spinning_secondaries = boot_cpu_count - 1;
760#endif
761
762#ifdef CONFIG_PPC_POWERNV
763 /* Scan and build the list of machine check recoverable ranges */
764 of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
765#endif
766
767 DBG(" <- early_init_devtree()\n");
768}
769
770#ifdef CONFIG_RELOCATABLE
771/*
772 * This function run before early_init_devtree, so we have to init
773 * initial_boot_params.
774 */
775void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
776{
777 /* Setup flat device-tree pointer */
778 initial_boot_params = params;
779
780 /*
781 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
782 * mess the memblock.
783 */
784 add_mem_to_memblock = 0;
785 of_scan_flat_dt(early_init_dt_scan_root, NULL);
786 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
787 add_mem_to_memblock = 1;
788
789 if (size)
790 *size = first_memblock_size;
791}
792#endif
793
794/*******
795 *
796 * New implementation of the OF "find" APIs, return a refcounted
797 * object, call of_node_put() when done. The device tree and list
798 * are protected by a rw_lock.
799 *
800 * Note that property management will need some locking as well,
801 * this isn't dealt with yet.
802 *
803 *******/
804
805/**
806 * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
807 * @np: device node of the device
808 *
809 * This looks for a property "ibm,chip-id" in the node or any
810 * of its parents and returns its content, or -1 if it cannot
811 * be found.
812 */
813int of_get_ibm_chip_id(struct device_node *np)
814{
815 of_node_get(np);
816 while(np) {
817 struct device_node *old = np;
818 const __be32 *prop;
819
820 prop = of_get_property(np, "ibm,chip-id", NULL);
821 if (prop) {
822 of_node_put(np);
823 return be32_to_cpup(prop);
824 }
825 np = of_get_parent(np);
826 of_node_put(old);
827 }
828 return -1;
829}
830
831/**
832 * cpu_to_chip_id - Return the cpus chip-id
833 * @cpu: The logical cpu number.
834 *
835 * Return the value of the ibm,chip-id property corresponding to the given
836 * logical cpu number. If the chip-id can not be found, returns -1.
837 */
838int cpu_to_chip_id(int cpu)
839{
840 struct device_node *np;
841
842 np = of_get_cpu_node(cpu, NULL);
843 if (!np)
844 return -1;
845
846 of_node_put(np);
847 return of_get_ibm_chip_id(np);
848}
849EXPORT_SYMBOL(cpu_to_chip_id);
850
851#ifdef CONFIG_PPC_PSERIES
852/*
853 * Fix up the uninitialized fields in a new device node:
854 * name, type and pci-specific fields
855 */
856
857static int of_finish_dynamic_node(struct device_node *node)
858{
859 struct device_node *parent = of_get_parent(node);
860 int err = 0;
861 const phandle *ibm_phandle;
862
863 node->name = of_get_property(node, "name", NULL);
864 node->type = of_get_property(node, "device_type", NULL);
865
866 if (!node->name)
867 node->name = "<NULL>";
868 if (!node->type)
869 node->type = "<NULL>";
870
871 if (!parent) {
872 err = -ENODEV;
873 goto out;
874 }
875
876 /* We don't support that function on PowerMac, at least
877 * not yet
878 */
879 if (machine_is(powermac))
880 return -ENODEV;
881
882 /* fix up new node's phandle field */
883 if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
884 node->phandle = *ibm_phandle;
885
886out:
887 of_node_put(parent);
888 return err;
889}
890
891static int prom_reconfig_notifier(struct notifier_block *nb,
892 unsigned long action, void *node)
893{
894 int err;
895
896 switch (action) {
897 case OF_RECONFIG_ATTACH_NODE:
898 err = of_finish_dynamic_node(node);
899 if (err < 0)
900 printk(KERN_ERR "finish_node returned %d\n", err);
901 break;
902 default:
903 err = 0;
904 break;
905 }
906 return notifier_from_errno(err);
907}
908
909static struct notifier_block prom_reconfig_nb = {
910 .notifier_call = prom_reconfig_notifier,
911 .priority = 10, /* This one needs to run first */
912};
913
914static int __init prom_reconfig_setup(void)
915{
916 return of_reconfig_notifier_register(&prom_reconfig_nb);
917}
918__initcall(prom_reconfig_setup);
919#endif
920
921bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
922{
923 return (int)phys_id == get_hard_smp_processor_id(cpu);
924}
925
926#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
927static struct debugfs_blob_wrapper flat_dt_blob;
928
929static int __init export_flat_device_tree(void)
930{
931 struct dentry *d;
932
933 flat_dt_blob.data = initial_boot_params;
934 flat_dt_blob.size = be32_to_cpu(initial_boot_params->totalsize);
935
936 d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
937 powerpc_debugfs_root, &flat_dt_blob);
938 if (!d)
939 return 1;
940
941 return 0;
942}
943__initcall(export_flat_device_tree);
944#endif