Loading...
1/*
2 * This file contains work-arounds for many known PCI hardware
3 * bugs. Devices present only on certain architectures (host
4 * bridges et cetera) should be handled in arch-specific code.
5 *
6 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
7 *
8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
9 *
10 * Init/reset quirks for USB host controllers should be in the
11 * USB quirks file, where their drivers can access reuse it.
12 *
13 * The bridge optimization stuff has been removed. If you really
14 * have a silly BIOS which is unable to set your host bridge right,
15 * use the PowerTweak utility (see http://powertweak.sourceforge.net).
16 */
17
18#include <linux/types.h>
19#include <linux/kernel.h>
20#include <linux/pci.h>
21#include <linux/init.h>
22#include <linux/delay.h>
23#include <linux/acpi.h>
24#include <linux/kallsyms.h>
25#include <linux/dmi.h>
26#include <linux/pci-aspm.h>
27#include <linux/ioport.h>
28#include <asm/dma.h> /* isa_dma_bridge_buggy */
29#include "pci.h"
30
31/*
32 * This quirk function disables memory decoding and releases memory resources
33 * of the device specified by kernel's boot parameter 'pci=resource_alignment='.
34 * It also rounds up size to specified alignment.
35 * Later on, the kernel will assign page-aligned memory resource back
36 * to the device.
37 */
38static void __devinit quirk_resource_alignment(struct pci_dev *dev)
39{
40 int i;
41 struct resource *r;
42 resource_size_t align, size;
43 u16 command;
44
45 if (!pci_is_reassigndev(dev))
46 return;
47
48 if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL &&
49 (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
50 dev_warn(&dev->dev,
51 "Can't reassign resources to host bridge.\n");
52 return;
53 }
54
55 dev_info(&dev->dev,
56 "Disabling memory decoding and releasing memory resources.\n");
57 pci_read_config_word(dev, PCI_COMMAND, &command);
58 command &= ~PCI_COMMAND_MEMORY;
59 pci_write_config_word(dev, PCI_COMMAND, command);
60
61 align = pci_specified_resource_alignment(dev);
62 for (i=0; i < PCI_BRIDGE_RESOURCES; i++) {
63 r = &dev->resource[i];
64 if (!(r->flags & IORESOURCE_MEM))
65 continue;
66 size = resource_size(r);
67 if (size < align) {
68 size = align;
69 dev_info(&dev->dev,
70 "Rounding up size of resource #%d to %#llx.\n",
71 i, (unsigned long long)size);
72 }
73 r->end = size - 1;
74 r->start = 0;
75 }
76 /* Need to disable bridge's resource window,
77 * to enable the kernel to reassign new resource
78 * window later on.
79 */
80 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
81 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
82 for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
83 r = &dev->resource[i];
84 if (!(r->flags & IORESOURCE_MEM))
85 continue;
86 r->end = resource_size(r) - 1;
87 r->start = 0;
88 }
89 pci_disable_bridge_window(dev);
90 }
91}
92DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
93
94/*
95 * Decoding should be disabled for a PCI device during BAR sizing to avoid
96 * conflict. But doing so may cause problems on host bridge and perhaps other
97 * key system devices. For devices that need to have mmio decoding always-on,
98 * we need to set the dev->mmio_always_on bit.
99 */
100static void __devinit quirk_mmio_always_on(struct pci_dev *dev)
101{
102 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
103 dev->mmio_always_on = 1;
104}
105DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_mmio_always_on);
106
107/* The Mellanox Tavor device gives false positive parity errors
108 * Mark this device with a broken_parity_status, to allow
109 * PCI scanning code to "skip" this now blacklisted device.
110 */
111static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
112{
113 dev->broken_parity_status = 1; /* This device gives false positives */
114}
115DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
116DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
117
118/* Deal with broken BIOS'es that neglect to enable passive release,
119 which can cause problems in combination with the 82441FX/PPro MTRRs */
120static void quirk_passive_release(struct pci_dev *dev)
121{
122 struct pci_dev *d = NULL;
123 unsigned char dlc;
124
125 /* We have to make sure a particular bit is set in the PIIX3
126 ISA bridge, so we have to go out and find it. */
127 while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) {
128 pci_read_config_byte(d, 0x82, &dlc);
129 if (!(dlc & 1<<1)) {
130 dev_info(&d->dev, "PIIX3: Enabling Passive Release\n");
131 dlc |= 1<<1;
132 pci_write_config_byte(d, 0x82, dlc);
133 }
134 }
135}
136DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
137DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
138
139/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
140 but VIA don't answer queries. If you happen to have good contacts at VIA
141 ask them for me please -- Alan
142
143 This appears to be BIOS not version dependent. So presumably there is a
144 chipset level fix */
145
146static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev)
147{
148 if (!isa_dma_bridge_buggy) {
149 isa_dma_bridge_buggy=1;
150 dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n");
151 }
152}
153 /*
154 * Its not totally clear which chipsets are the problematic ones
155 * We know 82C586 and 82C596 variants are affected.
156 */
157DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs);
158DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs);
159DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs);
160DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs);
161DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs);
162DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
163DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
164
165/*
166 * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
167 * for some HT machines to use C4 w/o hanging.
168 */
169static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev)
170{
171 u32 pmbase;
172 u16 pm1a;
173
174 pci_read_config_dword(dev, 0x40, &pmbase);
175 pmbase = pmbase & 0xff80;
176 pm1a = inw(pmbase);
177
178 if (pm1a & 0x10) {
179 dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
180 outw(0x10, pmbase);
181 }
182}
183DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
184
185/*
186 * Chipsets where PCI->PCI transfers vanish or hang
187 */
188static void __devinit quirk_nopcipci(struct pci_dev *dev)
189{
190 if ((pci_pci_problems & PCIPCI_FAIL)==0) {
191 dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n");
192 pci_pci_problems |= PCIPCI_FAIL;
193 }
194}
195DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci);
196DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci);
197
198static void __devinit quirk_nopciamd(struct pci_dev *dev)
199{
200 u8 rev;
201 pci_read_config_byte(dev, 0x08, &rev);
202 if (rev == 0x13) {
203 /* Erratum 24 */
204 dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n");
205 pci_pci_problems |= PCIAGP_FAIL;
206 }
207}
208DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd);
209
210/*
211 * Triton requires workarounds to be used by the drivers
212 */
213static void __devinit quirk_triton(struct pci_dev *dev)
214{
215 if ((pci_pci_problems&PCIPCI_TRITON)==0) {
216 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
217 pci_pci_problems |= PCIPCI_TRITON;
218 }
219}
220DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton);
221DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton);
222DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton);
223DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton);
224
225/*
226 * VIA Apollo KT133 needs PCI latency patch
227 * Made according to a windows driver based patch by George E. Breese
228 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
229 * and http://www.georgebreese.com/net/software/#PCI
230 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
231 * the info on which Mr Breese based his work.
232 *
233 * Updated based on further information from the site and also on
234 * information provided by VIA
235 */
236static void quirk_vialatency(struct pci_dev *dev)
237{
238 struct pci_dev *p;
239 u8 busarb;
240 /* Ok we have a potential problem chipset here. Now see if we have
241 a buggy southbridge */
242
243 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL);
244 if (p!=NULL) {
245 /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */
246 /* Check for buggy part revisions */
247 if (p->revision < 0x40 || p->revision > 0x42)
248 goto exit;
249 } else {
250 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
251 if (p==NULL) /* No problem parts */
252 goto exit;
253 /* Check for buggy part revisions */
254 if (p->revision < 0x10 || p->revision > 0x12)
255 goto exit;
256 }
257
258 /*
259 * Ok we have the problem. Now set the PCI master grant to
260 * occur every master grant. The apparent bug is that under high
261 * PCI load (quite common in Linux of course) you can get data
262 * loss when the CPU is held off the bus for 3 bus master requests
263 * This happens to include the IDE controllers....
264 *
265 * VIA only apply this fix when an SB Live! is present but under
266 * both Linux and Windows this isn't enough, and we have seen
267 * corruption without SB Live! but with things like 3 UDMA IDE
268 * controllers. So we ignore that bit of the VIA recommendation..
269 */
270
271 pci_read_config_byte(dev, 0x76, &busarb);
272 /* Set bit 4 and bi 5 of byte 76 to 0x01
273 "Master priority rotation on every PCI master grant */
274 busarb &= ~(1<<5);
275 busarb |= (1<<4);
276 pci_write_config_byte(dev, 0x76, busarb);
277 dev_info(&dev->dev, "Applying VIA southbridge workaround\n");
278exit:
279 pci_dev_put(p);
280}
281DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
282DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
283DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
284/* Must restore this on a resume from RAM */
285DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
286DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
287DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
288
289/*
290 * VIA Apollo VP3 needs ETBF on BT848/878
291 */
292static void __devinit quirk_viaetbf(struct pci_dev *dev)
293{
294 if ((pci_pci_problems&PCIPCI_VIAETBF)==0) {
295 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
296 pci_pci_problems |= PCIPCI_VIAETBF;
297 }
298}
299DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf);
300
301static void __devinit quirk_vsfx(struct pci_dev *dev)
302{
303 if ((pci_pci_problems&PCIPCI_VSFX)==0) {
304 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
305 pci_pci_problems |= PCIPCI_VSFX;
306 }
307}
308DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx);
309
310/*
311 * Ali Magik requires workarounds to be used by the drivers
312 * that DMA to AGP space. Latency must be set to 0xA and triton
313 * workaround applied too
314 * [Info kindly provided by ALi]
315 */
316static void __init quirk_alimagik(struct pci_dev *dev)
317{
318 if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) {
319 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
320 pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON;
321 }
322}
323DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik);
324DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik);
325
326/*
327 * Natoma has some interesting boundary conditions with Zoran stuff
328 * at least
329 */
330static void __devinit quirk_natoma(struct pci_dev *dev)
331{
332 if ((pci_pci_problems&PCIPCI_NATOMA)==0) {
333 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
334 pci_pci_problems |= PCIPCI_NATOMA;
335 }
336}
337DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma);
338DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma);
339DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma);
340DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma);
341DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma);
342DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma);
343
344/*
345 * This chip can cause PCI parity errors if config register 0xA0 is read
346 * while DMAs are occurring.
347 */
348static void __devinit quirk_citrine(struct pci_dev *dev)
349{
350 dev->cfg_size = 0xA0;
351}
352DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine);
353
354/*
355 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
356 * If it's needed, re-allocate the region.
357 */
358static void __devinit quirk_s3_64M(struct pci_dev *dev)
359{
360 struct resource *r = &dev->resource[0];
361
362 if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) {
363 r->start = 0;
364 r->end = 0x3ffffff;
365 }
366}
367DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
368DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
369
370/*
371 * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
372 * ver. 1.33 20070103) don't set the correct ISA PCI region header info.
373 * BAR0 should be 8 bytes; instead, it may be set to something like 8k
374 * (which conflicts w/ BAR1's memory range).
375 */
376static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
377{
378 if (pci_resource_len(dev, 0) != 8) {
379 struct resource *res = &dev->resource[0];
380 res->end = res->start + 8 - 1;
381 dev_info(&dev->dev, "CS5536 ISA bridge bug detected "
382 "(incorrect header); workaround applied.\n");
383 }
384}
385DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
386
387static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
388 unsigned size, int nr, const char *name)
389{
390 region &= ~(size-1);
391 if (region) {
392 struct pci_bus_region bus_region;
393 struct resource *res = dev->resource + nr;
394
395 res->name = pci_name(dev);
396 res->start = region;
397 res->end = region + size - 1;
398 res->flags = IORESOURCE_IO;
399
400 /* Convert from PCI bus to resource space. */
401 bus_region.start = res->start;
402 bus_region.end = res->end;
403 pcibios_bus_to_resource(dev, res, &bus_region);
404
405 if (pci_claim_resource(dev, nr) == 0)
406 dev_info(&dev->dev, "quirk: %pR claimed by %s\n",
407 res, name);
408 }
409}
410
411/*
412 * ATI Northbridge setups MCE the processor if you even
413 * read somewhere between 0x3b0->0x3bb or read 0x3d3
414 */
415static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev)
416{
417 dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n");
418 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
419 request_region(0x3b0, 0x0C, "RadeonIGP");
420 request_region(0x3d3, 0x01, "RadeonIGP");
421}
422DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce);
423
424/*
425 * Let's make the southbridge information explicit instead
426 * of having to worry about people probing the ACPI areas,
427 * for example.. (Yes, it happens, and if you read the wrong
428 * ACPI register it will put the machine to sleep with no
429 * way of waking it up again. Bummer).
430 *
431 * ALI M7101: Two IO regions pointed to by words at
432 * 0xE0 (64 bytes of ACPI registers)
433 * 0xE2 (32 bytes of SMB registers)
434 */
435static void __devinit quirk_ali7101_acpi(struct pci_dev *dev)
436{
437 u16 region;
438
439 pci_read_config_word(dev, 0xE0, ®ion);
440 quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
441 pci_read_config_word(dev, 0xE2, ®ion);
442 quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
443}
444DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi);
445
446static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
447{
448 u32 devres;
449 u32 mask, size, base;
450
451 pci_read_config_dword(dev, port, &devres);
452 if ((devres & enable) != enable)
453 return;
454 mask = (devres >> 16) & 15;
455 base = devres & 0xffff;
456 size = 16;
457 for (;;) {
458 unsigned bit = size >> 1;
459 if ((bit & mask) == bit)
460 break;
461 size = bit;
462 }
463 /*
464 * For now we only print it out. Eventually we'll want to
465 * reserve it (at least if it's in the 0x1000+ range), but
466 * let's get enough confirmation reports first.
467 */
468 base &= -size;
469 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1);
470}
471
472static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
473{
474 u32 devres;
475 u32 mask, size, base;
476
477 pci_read_config_dword(dev, port, &devres);
478 if ((devres & enable) != enable)
479 return;
480 base = devres & 0xffff0000;
481 mask = (devres & 0x3f) << 16;
482 size = 128 << 16;
483 for (;;) {
484 unsigned bit = size >> 1;
485 if ((bit & mask) == bit)
486 break;
487 size = bit;
488 }
489 /*
490 * For now we only print it out. Eventually we'll want to
491 * reserve it, but let's get enough confirmation reports first.
492 */
493 base &= -size;
494 dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1);
495}
496
497/*
498 * PIIX4 ACPI: Two IO regions pointed to by longwords at
499 * 0x40 (64 bytes of ACPI registers)
500 * 0x90 (16 bytes of SMB registers)
501 * and a few strange programmable PIIX4 device resources.
502 */
503static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
504{
505 u32 region, res_a;
506
507 pci_read_config_dword(dev, 0x40, ®ion);
508 quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
509 pci_read_config_dword(dev, 0x90, ®ion);
510 quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
511
512 /* Device resource A has enables for some of the other ones */
513 pci_read_config_dword(dev, 0x5c, &res_a);
514
515 piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
516 piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
517
518 /* Device resource D is just bitfields for static resources */
519
520 /* Device 12 enabled? */
521 if (res_a & (1 << 29)) {
522 piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
523 piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
524 }
525 /* Device 13 enabled? */
526 if (res_a & (1 << 30)) {
527 piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
528 piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
529 }
530 piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
531 piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
532}
533DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi);
534DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi);
535
536#define ICH_PMBASE 0x40
537#define ICH_ACPI_CNTL 0x44
538#define ICH4_ACPI_EN 0x10
539#define ICH6_ACPI_EN 0x80
540#define ICH4_GPIOBASE 0x58
541#define ICH4_GPIO_CNTL 0x5c
542#define ICH4_GPIO_EN 0x10
543#define ICH6_GPIOBASE 0x48
544#define ICH6_GPIO_CNTL 0x4c
545#define ICH6_GPIO_EN 0x10
546
547/*
548 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
549 * 0x40 (128 bytes of ACPI, GPIO & TCO registers)
550 * 0x58 (64 bytes of GPIO I/O space)
551 */
552static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev)
553{
554 u32 region;
555 u8 enable;
556
557 /*
558 * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict
559 * with low legacy (and fixed) ports. We don't know the decoding
560 * priority and can't tell whether the legacy device or the one created
561 * here is really at that address. This happens on boards with broken
562 * BIOSes.
563 */
564
565 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
566 if (enable & ICH4_ACPI_EN) {
567 pci_read_config_dword(dev, ICH_PMBASE, ®ion);
568 region &= PCI_BASE_ADDRESS_IO_MASK;
569 if (region >= PCIBIOS_MIN_IO)
570 quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
571 "ICH4 ACPI/GPIO/TCO");
572 }
573
574 pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable);
575 if (enable & ICH4_GPIO_EN) {
576 pci_read_config_dword(dev, ICH4_GPIOBASE, ®ion);
577 region &= PCI_BASE_ADDRESS_IO_MASK;
578 if (region >= PCIBIOS_MIN_IO)
579 quirk_io_region(dev, region, 64,
580 PCI_BRIDGE_RESOURCES + 1, "ICH4 GPIO");
581 }
582}
583DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi);
584DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi);
585DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi);
586DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi);
587DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi);
588DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi);
589DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi);
590DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi);
591DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi);
592DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi);
593
594static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev)
595{
596 u32 region;
597 u8 enable;
598
599 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
600 if (enable & ICH6_ACPI_EN) {
601 pci_read_config_dword(dev, ICH_PMBASE, ®ion);
602 region &= PCI_BASE_ADDRESS_IO_MASK;
603 if (region >= PCIBIOS_MIN_IO)
604 quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
605 "ICH6 ACPI/GPIO/TCO");
606 }
607
608 pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
609 if (enable & ICH6_GPIO_EN) {
610 pci_read_config_dword(dev, ICH6_GPIOBASE, ®ion);
611 region &= PCI_BASE_ADDRESS_IO_MASK;
612 if (region >= PCIBIOS_MIN_IO)
613 quirk_io_region(dev, region, 64,
614 PCI_BRIDGE_RESOURCES + 1, "ICH6 GPIO");
615 }
616}
617
618static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize)
619{
620 u32 val;
621 u32 size, base;
622
623 pci_read_config_dword(dev, reg, &val);
624
625 /* Enabled? */
626 if (!(val & 1))
627 return;
628 base = val & 0xfffc;
629 if (dynsize) {
630 /*
631 * This is not correct. It is 16, 32 or 64 bytes depending on
632 * register D31:F0:ADh bits 5:4.
633 *
634 * But this gets us at least _part_ of it.
635 */
636 size = 16;
637 } else {
638 size = 128;
639 }
640 base &= ~(size-1);
641
642 /* Just print it out for now. We should reserve it after more debugging */
643 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1);
644}
645
646static void __devinit quirk_ich6_lpc(struct pci_dev *dev)
647{
648 /* Shared ACPI/GPIO decode with all ICH6+ */
649 ich6_lpc_acpi_gpio(dev);
650
651 /* ICH6-specific generic IO decode */
652 ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0);
653 ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1);
654}
655DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc);
656DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc);
657
658static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name)
659{
660 u32 val;
661 u32 mask, base;
662
663 pci_read_config_dword(dev, reg, &val);
664
665 /* Enabled? */
666 if (!(val & 1))
667 return;
668
669 /*
670 * IO base in bits 15:2, mask in bits 23:18, both
671 * are dword-based
672 */
673 base = val & 0xfffc;
674 mask = (val >> 16) & 0xfc;
675 mask |= 3;
676
677 /* Just print it out for now. We should reserve it after more debugging */
678 dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask);
679}
680
681/* ICH7-10 has the same common LPC generic IO decode registers */
682static void __devinit quirk_ich7_lpc(struct pci_dev *dev)
683{
684 /* We share the common ACPI/GPIO decode with ICH6 */
685 ich6_lpc_acpi_gpio(dev);
686
687 /* And have 4 ICH7+ generic decodes */
688 ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1");
689 ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2");
690 ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3");
691 ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4");
692}
693DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc);
694DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc);
695DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc);
696DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc);
697DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc);
698DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc);
699DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc);
700DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc);
701DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc);
702DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc);
703DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc);
704DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc);
705DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc);
706
707/*
708 * VIA ACPI: One IO region pointed to by longword at
709 * 0x48 or 0x20 (256 bytes of ACPI registers)
710 */
711static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev)
712{
713 u32 region;
714
715 if (dev->revision & 0x10) {
716 pci_read_config_dword(dev, 0x48, ®ion);
717 region &= PCI_BASE_ADDRESS_IO_MASK;
718 quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI");
719 }
720}
721DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi);
722
723/*
724 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at
725 * 0x48 (256 bytes of ACPI registers)
726 * 0x70 (128 bytes of hardware monitoring register)
727 * 0x90 (16 bytes of SMB registers)
728 */
729static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev)
730{
731 u16 hm;
732 u32 smb;
733
734 quirk_vt82c586_acpi(dev);
735
736 pci_read_config_word(dev, 0x70, &hm);
737 hm &= PCI_BASE_ADDRESS_IO_MASK;
738 quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c686 HW-mon");
739
740 pci_read_config_dword(dev, 0x90, &smb);
741 smb &= PCI_BASE_ADDRESS_IO_MASK;
742 quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c686 SMB");
743}
744DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi);
745
746/*
747 * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
748 * 0x88 (128 bytes of power management registers)
749 * 0xd0 (16 bytes of SMB registers)
750 */
751static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
752{
753 u16 pm, smb;
754
755 pci_read_config_word(dev, 0x88, &pm);
756 pm &= PCI_BASE_ADDRESS_IO_MASK;
757 quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
758
759 pci_read_config_word(dev, 0xd0, &smb);
760 smb &= PCI_BASE_ADDRESS_IO_MASK;
761 quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB");
762}
763DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
764
765/*
766 * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
767 * Disable fast back-to-back on the secondary bus segment
768 */
769static void __devinit quirk_xio2000a(struct pci_dev *dev)
770{
771 struct pci_dev *pdev;
772 u16 command;
773
774 dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
775 "secondary bus fast back-to-back transfers disabled\n");
776 list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
777 pci_read_config_word(pdev, PCI_COMMAND, &command);
778 if (command & PCI_COMMAND_FAST_BACK)
779 pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
780 }
781}
782DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
783 quirk_xio2000a);
784
785#ifdef CONFIG_X86_IO_APIC
786
787#include <asm/io_apic.h>
788
789/*
790 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip
791 * devices to the external APIC.
792 *
793 * TODO: When we have device-specific interrupt routers,
794 * this code will go away from quirks.
795 */
796static void quirk_via_ioapic(struct pci_dev *dev)
797{
798 u8 tmp;
799
800 if (nr_ioapics < 1)
801 tmp = 0; /* nothing routed to external APIC */
802 else
803 tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
804
805 dev_info(&dev->dev, "%sbling VIA external APIC routing\n",
806 tmp == 0 ? "Disa" : "Ena");
807
808 /* Offset 0x58: External APIC IRQ output control */
809 pci_write_config_byte (dev, 0x58, tmp);
810}
811DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
812DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
813
814/*
815 * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
816 * This leads to doubled level interrupt rates.
817 * Set this bit to get rid of cycle wastage.
818 * Otherwise uncritical.
819 */
820static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
821{
822 u8 misc_control2;
823#define BYPASS_APIC_DEASSERT 8
824
825 pci_read_config_byte(dev, 0x5B, &misc_control2);
826 if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
827 dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n");
828 pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
829 }
830}
831DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
832DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
833
834/*
835 * The AMD io apic can hang the box when an apic irq is masked.
836 * We check all revs >= B0 (yet not in the pre production!) as the bug
837 * is currently marked NoFix
838 *
839 * We have multiple reports of hangs with this chipset that went away with
840 * noapic specified. For the moment we assume it's the erratum. We may be wrong
841 * of course. However the advice is demonstrably good even if so..
842 */
843static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
844{
845 if (dev->revision >= 0x02) {
846 dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
847 dev_warn(&dev->dev, " : booting with the \"noapic\" option\n");
848 }
849}
850DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
851
852static void __init quirk_ioapic_rmw(struct pci_dev *dev)
853{
854 if (dev->devfn == 0 && dev->bus->number == 0)
855 sis_apic_bug = 1;
856}
857DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw);
858#endif /* CONFIG_X86_IO_APIC */
859
860/*
861 * Some settings of MMRBC can lead to data corruption so block changes.
862 * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
863 */
864static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev)
865{
866 if (dev->subordinate && dev->revision <= 0x12) {
867 dev_info(&dev->dev, "AMD8131 rev %x detected; "
868 "disabling PCI-X MMRBC\n", dev->revision);
869 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
870 }
871}
872DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
873
874/*
875 * FIXME: it is questionable that quirk_via_acpi
876 * is needed. It shows up as an ISA bridge, and does not
877 * support the PCI_INTERRUPT_LINE register at all. Therefore
878 * it seems like setting the pci_dev's 'irq' to the
879 * value of the ACPI SCI interrupt is only done for convenience.
880 * -jgarzik
881 */
882static void __devinit quirk_via_acpi(struct pci_dev *d)
883{
884 /*
885 * VIA ACPI device: SCI IRQ line in PCI config byte 0x42
886 */
887 u8 irq;
888 pci_read_config_byte(d, 0x42, &irq);
889 irq &= 0xf;
890 if (irq && (irq != 2))
891 d->irq = irq;
892}
893DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi);
894DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi);
895
896
897/*
898 * VIA bridges which have VLink
899 */
900
901static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18;
902
903static void quirk_via_bridge(struct pci_dev *dev)
904{
905 /* See what bridge we have and find the device ranges */
906 switch (dev->device) {
907 case PCI_DEVICE_ID_VIA_82C686:
908 /* The VT82C686 is special, it attaches to PCI and can have
909 any device number. All its subdevices are functions of
910 that single device. */
911 via_vlink_dev_lo = PCI_SLOT(dev->devfn);
912 via_vlink_dev_hi = PCI_SLOT(dev->devfn);
913 break;
914 case PCI_DEVICE_ID_VIA_8237:
915 case PCI_DEVICE_ID_VIA_8237A:
916 via_vlink_dev_lo = 15;
917 break;
918 case PCI_DEVICE_ID_VIA_8235:
919 via_vlink_dev_lo = 16;
920 break;
921 case PCI_DEVICE_ID_VIA_8231:
922 case PCI_DEVICE_ID_VIA_8233_0:
923 case PCI_DEVICE_ID_VIA_8233A:
924 case PCI_DEVICE_ID_VIA_8233C_0:
925 via_vlink_dev_lo = 17;
926 break;
927 }
928}
929DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge);
930DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge);
931DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge);
932DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge);
933DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge);
934DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge);
935DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge);
936DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge);
937
938/**
939 * quirk_via_vlink - VIA VLink IRQ number update
940 * @dev: PCI device
941 *
942 * If the device we are dealing with is on a PIC IRQ we need to
943 * ensure that the IRQ line register which usually is not relevant
944 * for PCI cards, is actually written so that interrupts get sent
945 * to the right place.
946 * We only do this on systems where a VIA south bridge was detected,
947 * and only for VIA devices on the motherboard (see quirk_via_bridge
948 * above).
949 */
950
951static void quirk_via_vlink(struct pci_dev *dev)
952{
953 u8 irq, new_irq;
954
955 /* Check if we have VLink at all */
956 if (via_vlink_dev_lo == -1)
957 return;
958
959 new_irq = dev->irq;
960
961 /* Don't quirk interrupts outside the legacy IRQ range */
962 if (!new_irq || new_irq > 15)
963 return;
964
965 /* Internal device ? */
966 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi ||
967 PCI_SLOT(dev->devfn) < via_vlink_dev_lo)
968 return;
969
970 /* This is an internal VLink device on a PIC interrupt. The BIOS
971 ought to have set this but may not have, so we redo it */
972
973 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
974 if (new_irq != irq) {
975 dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n",
976 irq, new_irq);
977 udelay(15); /* unknown if delay really needed */
978 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
979 }
980}
981DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
982
983/*
984 * VIA VT82C598 has its device ID settable and many BIOSes
985 * set it to the ID of VT82C597 for backward compatibility.
986 * We need to switch it off to be able to recognize the real
987 * type of the chip.
988 */
989static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
990{
991 pci_write_config_byte(dev, 0xfc, 0);
992 pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device);
993}
994DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id);
995
996/*
997 * CardBus controllers have a legacy base address that enables them
998 * to respond as i82365 pcmcia controllers. We don't want them to
999 * do this even if the Linux CardBus driver is not loaded, because
1000 * the Linux i82365 driver does not (and should not) handle CardBus.
1001 */
1002static void quirk_cardbus_legacy(struct pci_dev *dev)
1003{
1004 if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class)
1005 return;
1006 pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
1007}
1008DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
1009DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
1010
1011/*
1012 * Following the PCI ordering rules is optional on the AMD762. I'm not
1013 * sure what the designers were smoking but let's not inhale...
1014 *
1015 * To be fair to AMD, it follows the spec by default, its BIOS people
1016 * who turn it off!
1017 */
1018static void quirk_amd_ordering(struct pci_dev *dev)
1019{
1020 u32 pcic;
1021 pci_read_config_dword(dev, 0x4C, &pcic);
1022 if ((pcic&6)!=6) {
1023 pcic |= 6;
1024 dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n");
1025 pci_write_config_dword(dev, 0x4C, pcic);
1026 pci_read_config_dword(dev, 0x84, &pcic);
1027 pcic |= (1<<23); /* Required in this mode */
1028 pci_write_config_dword(dev, 0x84, pcic);
1029 }
1030}
1031DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
1032DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
1033
1034/*
1035 * DreamWorks provided workaround for Dunord I-3000 problem
1036 *
1037 * This card decodes and responds to addresses not apparently
1038 * assigned to it. We force a larger allocation to ensure that
1039 * nothing gets put too close to it.
1040 */
1041static void __devinit quirk_dunord ( struct pci_dev * dev )
1042{
1043 struct resource *r = &dev->resource [1];
1044 r->start = 0;
1045 r->end = 0xffffff;
1046}
1047DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord);
1048
1049/*
1050 * i82380FB mobile docking controller: its PCI-to-PCI bridge
1051 * is subtractive decoding (transparent), and does indicate this
1052 * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80
1053 * instead of 0x01.
1054 */
1055static void __devinit quirk_transparent_bridge(struct pci_dev *dev)
1056{
1057 dev->transparent = 1;
1058}
1059DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge);
1060DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge);
1061
1062/*
1063 * Common misconfiguration of the MediaGX/Geode PCI master that will
1064 * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
1065 * datasheets found at http://www.national.com/analog for info on what
1066 * these bits do. <christer@weinigel.se>
1067 */
1068static void quirk_mediagx_master(struct pci_dev *dev)
1069{
1070 u8 reg;
1071 pci_read_config_byte(dev, 0x41, ®);
1072 if (reg & 2) {
1073 reg &= ~2;
1074 dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg);
1075 pci_write_config_byte(dev, 0x41, reg);
1076 }
1077}
1078DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
1079DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
1080
1081/*
1082 * Ensure C0 rev restreaming is off. This is normally done by
1083 * the BIOS but in the odd case it is not the results are corruption
1084 * hence the presence of a Linux check
1085 */
1086static void quirk_disable_pxb(struct pci_dev *pdev)
1087{
1088 u16 config;
1089
1090 if (pdev->revision != 0x04) /* Only C0 requires this */
1091 return;
1092 pci_read_config_word(pdev, 0x40, &config);
1093 if (config & (1<<6)) {
1094 config &= ~(1<<6);
1095 pci_write_config_word(pdev, 0x40, config);
1096 dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n");
1097 }
1098}
1099DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
1100DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
1101
1102static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
1103{
1104 /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
1105 u8 tmp;
1106
1107 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
1108 if (tmp == 0x01) {
1109 pci_read_config_byte(pdev, 0x40, &tmp);
1110 pci_write_config_byte(pdev, 0x40, tmp|1);
1111 pci_write_config_byte(pdev, 0x9, 1);
1112 pci_write_config_byte(pdev, 0xa, 6);
1113 pci_write_config_byte(pdev, 0x40, tmp);
1114
1115 pdev->class = PCI_CLASS_STORAGE_SATA_AHCI;
1116 dev_info(&pdev->dev, "set SATA to AHCI mode\n");
1117 }
1118}
1119DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
1120DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
1121DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
1122DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
1123DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
1124DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
1125
1126/*
1127 * Serverworks CSB5 IDE does not fully support native mode
1128 */
1129static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
1130{
1131 u8 prog;
1132 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
1133 if (prog & 5) {
1134 prog &= ~5;
1135 pdev->class &= ~5;
1136 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
1137 /* PCI layer will sort out resources */
1138 }
1139}
1140DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide);
1141
1142/*
1143 * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
1144 */
1145static void __init quirk_ide_samemode(struct pci_dev *pdev)
1146{
1147 u8 prog;
1148
1149 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
1150
1151 if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) {
1152 dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n");
1153 prog &= ~5;
1154 pdev->class &= ~5;
1155 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
1156 }
1157}
1158DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
1159
1160/*
1161 * Some ATA devices break if put into D3
1162 */
1163
1164static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
1165{
1166 /* Quirk the legacy ATA devices only. The AHCI ones are ok */
1167 if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
1168 pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
1169}
1170DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
1171DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
1172/* ALi loses some register settings that we cannot then restore */
1173DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3);
1174/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
1175 occur when mode detecting */
1176DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3);
1177
1178/* This was originally an Alpha specific thing, but it really fits here.
1179 * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
1180 */
1181static void __init quirk_eisa_bridge(struct pci_dev *dev)
1182{
1183 dev->class = PCI_CLASS_BRIDGE_EISA << 8;
1184}
1185DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge);
1186
1187
1188/*
1189 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
1190 * is not activated. The myth is that Asus said that they do not want the
1191 * users to be irritated by just another PCI Device in the Win98 device
1192 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
1193 * package 2.7.0 for details)
1194 *
1195 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
1196 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
1197 * becomes necessary to do this tweak in two steps -- the chosen trigger
1198 * is either the Host bridge (preferred) or on-board VGA controller.
1199 *
1200 * Note that we used to unhide the SMBus that way on Toshiba laptops
1201 * (Satellite A40 and Tecra M2) but then found that the thermal management
1202 * was done by SMM code, which could cause unsynchronized concurrent
1203 * accesses to the SMBus registers, with potentially bad effects. Thus you
1204 * should be very careful when adding new entries: if SMM is accessing the
1205 * Intel SMBus, this is a very good reason to leave it hidden.
1206 *
1207 * Likewise, many recent laptops use ACPI for thermal management. If the
1208 * ACPI DSDT code accesses the SMBus, then Linux should not access it
1209 * natively, and keeping the SMBus hidden is the right thing to do. If you
1210 * are about to add an entry in the table below, please first disassemble
1211 * the DSDT and double-check that there is no code accessing the SMBus.
1212 */
1213static int asus_hides_smbus;
1214
1215static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
1216{
1217 if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
1218 if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
1219 switch(dev->subsystem_device) {
1220 case 0x8025: /* P4B-LX */
1221 case 0x8070: /* P4B */
1222 case 0x8088: /* P4B533 */
1223 case 0x1626: /* L3C notebook */
1224 asus_hides_smbus = 1;
1225 }
1226 else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
1227 switch(dev->subsystem_device) {
1228 case 0x80b1: /* P4GE-V */
1229 case 0x80b2: /* P4PE */
1230 case 0x8093: /* P4B533-V */
1231 asus_hides_smbus = 1;
1232 }
1233 else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
1234 switch(dev->subsystem_device) {
1235 case 0x8030: /* P4T533 */
1236 asus_hides_smbus = 1;
1237 }
1238 else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
1239 switch (dev->subsystem_device) {
1240 case 0x8070: /* P4G8X Deluxe */
1241 asus_hides_smbus = 1;
1242 }
1243 else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH)
1244 switch (dev->subsystem_device) {
1245 case 0x80c9: /* PU-DLS */
1246 asus_hides_smbus = 1;
1247 }
1248 else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
1249 switch (dev->subsystem_device) {
1250 case 0x1751: /* M2N notebook */
1251 case 0x1821: /* M5N notebook */
1252 case 0x1897: /* A6L notebook */
1253 asus_hides_smbus = 1;
1254 }
1255 else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1256 switch (dev->subsystem_device) {
1257 case 0x184b: /* W1N notebook */
1258 case 0x186a: /* M6Ne notebook */
1259 asus_hides_smbus = 1;
1260 }
1261 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
1262 switch (dev->subsystem_device) {
1263 case 0x80f2: /* P4P800-X */
1264 asus_hides_smbus = 1;
1265 }
1266 else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
1267 switch (dev->subsystem_device) {
1268 case 0x1882: /* M6V notebook */
1269 case 0x1977: /* A6VA notebook */
1270 asus_hides_smbus = 1;
1271 }
1272 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
1273 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1274 switch(dev->subsystem_device) {
1275 case 0x088C: /* HP Compaq nc8000 */
1276 case 0x0890: /* HP Compaq nc6000 */
1277 asus_hides_smbus = 1;
1278 }
1279 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
1280 switch (dev->subsystem_device) {
1281 case 0x12bc: /* HP D330L */
1282 case 0x12bd: /* HP D530 */
1283 case 0x006a: /* HP Compaq nx9500 */
1284 asus_hides_smbus = 1;
1285 }
1286 else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
1287 switch (dev->subsystem_device) {
1288 case 0x12bf: /* HP xw4100 */
1289 asus_hides_smbus = 1;
1290 }
1291 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
1292 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1293 switch(dev->subsystem_device) {
1294 case 0xC00C: /* Samsung P35 notebook */
1295 asus_hides_smbus = 1;
1296 }
1297 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
1298 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1299 switch(dev->subsystem_device) {
1300 case 0x0058: /* Compaq Evo N620c */
1301 asus_hides_smbus = 1;
1302 }
1303 else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3)
1304 switch(dev->subsystem_device) {
1305 case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */
1306 /* Motherboard doesn't have Host bridge
1307 * subvendor/subdevice IDs, therefore checking
1308 * its on-board VGA controller */
1309 asus_hides_smbus = 1;
1310 }
1311 else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2)
1312 switch(dev->subsystem_device) {
1313 case 0x00b8: /* Compaq Evo D510 CMT */
1314 case 0x00b9: /* Compaq Evo D510 SFF */
1315 case 0x00ba: /* Compaq Evo D510 USDT */
1316 /* Motherboard doesn't have Host bridge
1317 * subvendor/subdevice IDs and on-board VGA
1318 * controller is disabled if an AGP card is
1319 * inserted, therefore checking USB UHCI
1320 * Controller #1 */
1321 asus_hides_smbus = 1;
1322 }
1323 else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC)
1324 switch (dev->subsystem_device) {
1325 case 0x001A: /* Compaq Deskpro EN SSF P667 815E */
1326 /* Motherboard doesn't have host bridge
1327 * subvendor/subdevice IDs, therefore checking
1328 * its on-board VGA controller */
1329 asus_hides_smbus = 1;
1330 }
1331 }
1332}
1333DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge);
1334DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge);
1335DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge);
1336DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge);
1337DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge);
1338DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge);
1339DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge);
1340DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge);
1341DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge);
1342DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge);
1343
1344DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge);
1345DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge);
1346DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge);
1347
1348static void asus_hides_smbus_lpc(struct pci_dev *dev)
1349{
1350 u16 val;
1351
1352 if (likely(!asus_hides_smbus))
1353 return;
1354
1355 pci_read_config_word(dev, 0xF2, &val);
1356 if (val & 0x8) {
1357 pci_write_config_word(dev, 0xF2, val & (~0x8));
1358 pci_read_config_word(dev, 0xF2, &val);
1359 if (val & 0x8)
1360 dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val);
1361 else
1362 dev_info(&dev->dev, "Enabled i801 SMBus device\n");
1363 }
1364}
1365DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
1366DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
1367DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
1368DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
1369DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
1370DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
1371DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
1372DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
1373DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
1374DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
1375DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
1376DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
1377DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
1378DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
1379
1380/* It appears we just have one such device. If not, we have a warning */
1381static void __iomem *asus_rcba_base;
1382static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev)
1383{
1384 u32 rcba;
1385
1386 if (likely(!asus_hides_smbus))
1387 return;
1388 WARN_ON(asus_rcba_base);
1389
1390 pci_read_config_dword(dev, 0xF0, &rcba);
1391 /* use bits 31:14, 16 kB aligned */
1392 asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000);
1393 if (asus_rcba_base == NULL)
1394 return;
1395}
1396
1397static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev)
1398{
1399 u32 val;
1400
1401 if (likely(!asus_hides_smbus || !asus_rcba_base))
1402 return;
1403 /* read the Function Disable register, dword mode only */
1404 val = readl(asus_rcba_base + 0x3418);
1405 writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */
1406}
1407
1408static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev)
1409{
1410 if (likely(!asus_hides_smbus || !asus_rcba_base))
1411 return;
1412 iounmap(asus_rcba_base);
1413 asus_rcba_base = NULL;
1414 dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n");
1415}
1416
1417static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
1418{
1419 asus_hides_smbus_lpc_ich6_suspend(dev);
1420 asus_hides_smbus_lpc_ich6_resume_early(dev);
1421 asus_hides_smbus_lpc_ich6_resume(dev);
1422}
1423DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6);
1424DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend);
1425DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume);
1426DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early);
1427
1428/*
1429 * SiS 96x south bridge: BIOS typically hides SMBus device...
1430 */
1431static void quirk_sis_96x_smbus(struct pci_dev *dev)
1432{
1433 u8 val = 0;
1434 pci_read_config_byte(dev, 0x77, &val);
1435 if (val & 0x10) {
1436 dev_info(&dev->dev, "Enabling SiS 96x SMBus\n");
1437 pci_write_config_byte(dev, 0x77, val & ~0x10);
1438 }
1439}
1440DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
1441DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
1442DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
1443DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
1444DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
1445DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
1446DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
1447DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
1448
1449/*
1450 * ... This is further complicated by the fact that some SiS96x south
1451 * bridges pretend to be 85C503/5513 instead. In that case see if we
1452 * spotted a compatible north bridge to make sure.
1453 * (pci_find_device doesn't work yet)
1454 *
1455 * We can also enable the sis96x bit in the discovery register..
1456 */
1457#define SIS_DETECT_REGISTER 0x40
1458
1459static void quirk_sis_503(struct pci_dev *dev)
1460{
1461 u8 reg;
1462 u16 devid;
1463
1464 pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®);
1465 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6));
1466 pci_read_config_word(dev, PCI_DEVICE_ID, &devid);
1467 if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) {
1468 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg);
1469 return;
1470 }
1471
1472 /*
1473 * Ok, it now shows up as a 96x.. run the 96x quirk by
1474 * hand in case it has already been processed.
1475 * (depends on link order, which is apparently not guaranteed)
1476 */
1477 dev->device = devid;
1478 quirk_sis_96x_smbus(dev);
1479}
1480DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
1481DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
1482
1483
1484/*
1485 * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
1486 * and MC97 modem controller are disabled when a second PCI soundcard is
1487 * present. This patch, tweaking the VT8237 ISA bridge, enables them.
1488 * -- bjd
1489 */
1490static void asus_hides_ac97_lpc(struct pci_dev *dev)
1491{
1492 u8 val;
1493 int asus_hides_ac97 = 0;
1494
1495 if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
1496 if (dev->device == PCI_DEVICE_ID_VIA_8237)
1497 asus_hides_ac97 = 1;
1498 }
1499
1500 if (!asus_hides_ac97)
1501 return;
1502
1503 pci_read_config_byte(dev, 0x50, &val);
1504 if (val & 0xc0) {
1505 pci_write_config_byte(dev, 0x50, val & (~0xc0));
1506 pci_read_config_byte(dev, 0x50, &val);
1507 if (val & 0xc0)
1508 dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val);
1509 else
1510 dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n");
1511 }
1512}
1513DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
1514DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
1515
1516#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
1517
1518/*
1519 * If we are using libata we can drive this chip properly but must
1520 * do this early on to make the additional device appear during
1521 * the PCI scanning.
1522 */
1523static void quirk_jmicron_ata(struct pci_dev *pdev)
1524{
1525 u32 conf1, conf5, class;
1526 u8 hdr;
1527
1528 /* Only poke fn 0 */
1529 if (PCI_FUNC(pdev->devfn))
1530 return;
1531
1532 pci_read_config_dword(pdev, 0x40, &conf1);
1533 pci_read_config_dword(pdev, 0x80, &conf5);
1534
1535 conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
1536 conf5 &= ~(1 << 24); /* Clear bit 24 */
1537
1538 switch (pdev->device) {
1539 case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
1540 case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
1541 case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */
1542 /* The controller should be in single function ahci mode */
1543 conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
1544 break;
1545
1546 case PCI_DEVICE_ID_JMICRON_JMB365:
1547 case PCI_DEVICE_ID_JMICRON_JMB366:
1548 /* Redirect IDE second PATA port to the right spot */
1549 conf5 |= (1 << 24);
1550 /* Fall through */
1551 case PCI_DEVICE_ID_JMICRON_JMB361:
1552 case PCI_DEVICE_ID_JMICRON_JMB363:
1553 case PCI_DEVICE_ID_JMICRON_JMB369:
1554 /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
1555 /* Set the class codes correctly and then direct IDE 0 */
1556 conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
1557 break;
1558
1559 case PCI_DEVICE_ID_JMICRON_JMB368:
1560 /* The controller should be in single function IDE mode */
1561 conf1 |= 0x00C00000; /* Set 22, 23 */
1562 break;
1563 }
1564
1565 pci_write_config_dword(pdev, 0x40, conf1);
1566 pci_write_config_dword(pdev, 0x80, conf5);
1567
1568 /* Update pdev accordingly */
1569 pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
1570 pdev->hdr_type = hdr & 0x7f;
1571 pdev->multifunction = !!(hdr & 0x80);
1572
1573 pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class);
1574 pdev->class = class >> 8;
1575}
1576DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
1577DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
1578DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
1579DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
1580DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
1581DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
1582DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
1583DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
1584DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
1585DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
1586DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
1587DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
1588DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
1589DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
1590DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
1591DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
1592DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
1593DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
1594
1595#endif
1596
1597#ifdef CONFIG_X86_IO_APIC
1598static void __init quirk_alder_ioapic(struct pci_dev *pdev)
1599{
1600 int i;
1601
1602 if ((pdev->class >> 8) != 0xff00)
1603 return;
1604
1605 /* the first BAR is the location of the IO APIC...we must
1606 * not touch this (and it's already covered by the fixmap), so
1607 * forcibly insert it into the resource tree */
1608 if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0))
1609 insert_resource(&iomem_resource, &pdev->resource[0]);
1610
1611 /* The next five BARs all seem to be rubbish, so just clean
1612 * them out */
1613 for (i=1; i < 6; i++) {
1614 memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
1615 }
1616
1617}
1618DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic);
1619#endif
1620
1621static void __devinit quirk_pcie_mch(struct pci_dev *pdev)
1622{
1623 pci_msi_off(pdev);
1624 pdev->no_msi = 1;
1625}
1626DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch);
1627DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch);
1628DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch);
1629
1630
1631/*
1632 * It's possible for the MSI to get corrupted if shpc and acpi
1633 * are used together on certain PXH-based systems.
1634 */
1635static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
1636{
1637 pci_msi_off(dev);
1638 dev->no_msi = 1;
1639 dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n");
1640}
1641DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
1642DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
1643DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
1644DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
1645DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
1646
1647/*
1648 * Some Intel PCI Express chipsets have trouble with downstream
1649 * device power management.
1650 */
1651static void quirk_intel_pcie_pm(struct pci_dev * dev)
1652{
1653 pci_pm_d3_delay = 120;
1654 dev->no_d1d2 = 1;
1655}
1656
1657DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm);
1658DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm);
1659DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm);
1660DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm);
1661DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm);
1662DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm);
1663DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm);
1664DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm);
1665DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm);
1666DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm);
1667DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm);
1668DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm);
1669DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm);
1670DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm);
1671DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm);
1672DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm);
1673DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm);
1674DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm);
1675DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
1676DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
1677DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
1678
1679#ifdef CONFIG_X86_IO_APIC
1680/*
1681 * Boot interrupts on some chipsets cannot be turned off. For these chipsets,
1682 * remap the original interrupt in the linux kernel to the boot interrupt, so
1683 * that a PCI device's interrupt handler is installed on the boot interrupt
1684 * line instead.
1685 */
1686static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
1687{
1688 if (noioapicquirk || noioapicreroute)
1689 return;
1690
1691 dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT;
1692 dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n",
1693 dev->vendor, dev->device);
1694}
1695DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
1696DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
1697DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
1698DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
1699DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
1700DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
1701DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
1702DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
1703DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
1704DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
1705DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
1706DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
1707DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
1708DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
1709DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
1710DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
1711
1712/*
1713 * On some chipsets we can disable the generation of legacy INTx boot
1714 * interrupts.
1715 */
1716
1717/*
1718 * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no
1719 * 300641-004US, section 5.7.3.
1720 */
1721#define INTEL_6300_IOAPIC_ABAR 0x40
1722#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14)
1723
1724static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
1725{
1726 u16 pci_config_word;
1727
1728 if (noioapicquirk)
1729 return;
1730
1731 pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word);
1732 pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
1733 pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word);
1734
1735 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
1736 dev->vendor, dev->device);
1737}
1738DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
1739DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
1740
1741/*
1742 * disable boot interrupts on HT-1000
1743 */
1744#define BC_HT1000_FEATURE_REG 0x64
1745#define BC_HT1000_PIC_REGS_ENABLE (1<<0)
1746#define BC_HT1000_MAP_IDX 0xC00
1747#define BC_HT1000_MAP_DATA 0xC01
1748
1749static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev)
1750{
1751 u32 pci_config_dword;
1752 u8 irq;
1753
1754 if (noioapicquirk)
1755 return;
1756
1757 pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword);
1758 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword |
1759 BC_HT1000_PIC_REGS_ENABLE);
1760
1761 for (irq = 0x10; irq < 0x10 + 32; irq++) {
1762 outb(irq, BC_HT1000_MAP_IDX);
1763 outb(0x00, BC_HT1000_MAP_DATA);
1764 }
1765
1766 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword);
1767
1768 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
1769 dev->vendor, dev->device);
1770}
1771DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
1772DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
1773
1774/*
1775 * disable boot interrupts on AMD and ATI chipsets
1776 */
1777/*
1778 * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131
1779 * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode
1780 * (due to an erratum).
1781 */
1782#define AMD_813X_MISC 0x40
1783#define AMD_813X_NOIOAMODE (1<<0)
1784#define AMD_813X_REV_B1 0x12
1785#define AMD_813X_REV_B2 0x13
1786
1787static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
1788{
1789 u32 pci_config_dword;
1790
1791 if (noioapicquirk)
1792 return;
1793 if ((dev->revision == AMD_813X_REV_B1) ||
1794 (dev->revision == AMD_813X_REV_B2))
1795 return;
1796
1797 pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
1798 pci_config_dword &= ~AMD_813X_NOIOAMODE;
1799 pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword);
1800
1801 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
1802 dev->vendor, dev->device);
1803}
1804DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
1805DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
1806DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
1807DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
1808
1809#define AMD_8111_PCI_IRQ_ROUTING 0x56
1810
1811static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev)
1812{
1813 u16 pci_config_word;
1814
1815 if (noioapicquirk)
1816 return;
1817
1818 pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word);
1819 if (!pci_config_word) {
1820 dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] "
1821 "already disabled\n", dev->vendor, dev->device);
1822 return;
1823 }
1824 pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0);
1825 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
1826 dev->vendor, dev->device);
1827}
1828DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
1829DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
1830#endif /* CONFIG_X86_IO_APIC */
1831
1832/*
1833 * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
1834 * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
1835 * Re-allocate the region if needed...
1836 */
1837static void __init quirk_tc86c001_ide(struct pci_dev *dev)
1838{
1839 struct resource *r = &dev->resource[0];
1840
1841 if (r->start & 0x8) {
1842 r->start = 0;
1843 r->end = 0xf;
1844 }
1845}
1846DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
1847 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
1848 quirk_tc86c001_ide);
1849
1850static void __devinit quirk_netmos(struct pci_dev *dev)
1851{
1852 unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
1853 unsigned int num_serial = dev->subsystem_device & 0xf;
1854
1855 /*
1856 * These Netmos parts are multiport serial devices with optional
1857 * parallel ports. Even when parallel ports are present, they
1858 * are identified as class SERIAL, which means the serial driver
1859 * will claim them. To prevent this, mark them as class OTHER.
1860 * These combo devices should be claimed by parport_serial.
1861 *
1862 * The subdevice ID is of the form 0x00PS, where <P> is the number
1863 * of parallel ports and <S> is the number of serial ports.
1864 */
1865 switch (dev->device) {
1866 case PCI_DEVICE_ID_NETMOS_9835:
1867 /* Well, this rule doesn't hold for the following 9835 device */
1868 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
1869 dev->subsystem_device == 0x0299)
1870 return;
1871 case PCI_DEVICE_ID_NETMOS_9735:
1872 case PCI_DEVICE_ID_NETMOS_9745:
1873 case PCI_DEVICE_ID_NETMOS_9845:
1874 case PCI_DEVICE_ID_NETMOS_9855:
1875 if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL &&
1876 num_parallel) {
1877 dev_info(&dev->dev, "Netmos %04x (%u parallel, "
1878 "%u serial); changing class SERIAL to OTHER "
1879 "(use parport_serial)\n",
1880 dev->device, num_parallel, num_serial);
1881 dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) |
1882 (dev->class & 0xff);
1883 }
1884 }
1885}
1886DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
1887
1888static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
1889{
1890 u16 command, pmcsr;
1891 u8 __iomem *csr;
1892 u8 cmd_hi;
1893 int pm;
1894
1895 switch (dev->device) {
1896 /* PCI IDs taken from drivers/net/e100.c */
1897 case 0x1029:
1898 case 0x1030 ... 0x1034:
1899 case 0x1038 ... 0x103E:
1900 case 0x1050 ... 0x1057:
1901 case 0x1059:
1902 case 0x1064 ... 0x106B:
1903 case 0x1091 ... 0x1095:
1904 case 0x1209:
1905 case 0x1229:
1906 case 0x2449:
1907 case 0x2459:
1908 case 0x245D:
1909 case 0x27DC:
1910 break;
1911 default:
1912 return;
1913 }
1914
1915 /*
1916 * Some firmware hands off the e100 with interrupts enabled,
1917 * which can cause a flood of interrupts if packets are
1918 * received before the driver attaches to the device. So
1919 * disable all e100 interrupts here. The driver will
1920 * re-enable them when it's ready.
1921 */
1922 pci_read_config_word(dev, PCI_COMMAND, &command);
1923
1924 if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
1925 return;
1926
1927 /*
1928 * Check that the device is in the D0 power state. If it's not,
1929 * there is no point to look any further.
1930 */
1931 pm = pci_find_capability(dev, PCI_CAP_ID_PM);
1932 if (pm) {
1933 pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
1934 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
1935 return;
1936 }
1937
1938 /* Convert from PCI bus to resource space. */
1939 csr = ioremap(pci_resource_start(dev, 0), 8);
1940 if (!csr) {
1941 dev_warn(&dev->dev, "Can't map e100 registers\n");
1942 return;
1943 }
1944
1945 cmd_hi = readb(csr + 3);
1946 if (cmd_hi == 0) {
1947 dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; "
1948 "disabling\n");
1949 writeb(1, csr + 3);
1950 }
1951
1952 iounmap(csr);
1953}
1954DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
1955
1956/*
1957 * The 82575 and 82598 may experience data corruption issues when transitioning
1958 * out of L0S. To prevent this we need to disable L0S on the pci-e link
1959 */
1960static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
1961{
1962 dev_info(&dev->dev, "Disabling L0s\n");
1963 pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
1964}
1965DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
1966DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
1967DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
1968DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
1969DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
1970DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
1971DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
1972DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
1973DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
1974DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
1975DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
1976DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
1977DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
1978DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
1979
1980static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
1981{
1982 /* rev 1 ncr53c810 chips don't set the class at all which means
1983 * they don't get their resources remapped. Fix that here.
1984 */
1985
1986 if (dev->class == PCI_CLASS_NOT_DEFINED) {
1987 dev_info(&dev->dev, "NCR 53c810 rev 1 detected; setting PCI class\n");
1988 dev->class = PCI_CLASS_STORAGE_SCSI;
1989 }
1990}
1991DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
1992
1993/* Enable 1k I/O space granularity on the Intel P64H2 */
1994static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
1995{
1996 u16 en1k;
1997 u8 io_base_lo, io_limit_lo;
1998 unsigned long base, limit;
1999 struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
2000
2001 pci_read_config_word(dev, 0x40, &en1k);
2002
2003 if (en1k & 0x200) {
2004 dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n");
2005
2006 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
2007 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
2008 base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
2009 limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
2010
2011 if (base <= limit) {
2012 res->start = base;
2013 res->end = limit + 0x3ff;
2014 }
2015 }
2016}
2017DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
2018
2019/* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2
2020 * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge()
2021 * in drivers/pci/setup-bus.c
2022 */
2023static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev)
2024{
2025 u16 en1k, iobl_adr, iobl_adr_1k;
2026 struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
2027
2028 pci_read_config_word(dev, 0x40, &en1k);
2029
2030 if (en1k & 0x200) {
2031 pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr);
2032
2033 iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00);
2034
2035 if (iobl_adr != iobl_adr_1k) {
2036 dev_info(&dev->dev, "Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1KB granularity\n",
2037 iobl_adr,iobl_adr_1k);
2038 pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k);
2039 }
2040 }
2041}
2042DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl);
2043
2044/* Under some circumstances, AER is not linked with extended capabilities.
2045 * Force it to be linked by setting the corresponding control bit in the
2046 * config space.
2047 */
2048static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
2049{
2050 uint8_t b;
2051 if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
2052 if (!(b & 0x20)) {
2053 pci_write_config_byte(dev, 0xf41, b | 0x20);
2054 dev_info(&dev->dev,
2055 "Linking AER extended capability\n");
2056 }
2057 }
2058}
2059DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
2060 quirk_nvidia_ck804_pcie_aer_ext_cap);
2061DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
2062 quirk_nvidia_ck804_pcie_aer_ext_cap);
2063
2064static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
2065{
2066 /*
2067 * Disable PCI Bus Parking and PCI Master read caching on CX700
2068 * which causes unspecified timing errors with a VT6212L on the PCI
2069 * bus leading to USB2.0 packet loss.
2070 *
2071 * This quirk is only enabled if a second (on the external PCI bus)
2072 * VT6212L is found -- the CX700 core itself also contains a USB
2073 * host controller with the same PCI ID as the VT6212L.
2074 */
2075
2076 /* Count VT6212L instances */
2077 struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA,
2078 PCI_DEVICE_ID_VIA_8235_USB_2, NULL);
2079 uint8_t b;
2080
2081 /* p should contain the first (internal) VT6212L -- see if we have
2082 an external one by searching again */
2083 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p);
2084 if (!p)
2085 return;
2086 pci_dev_put(p);
2087
2088 if (pci_read_config_byte(dev, 0x76, &b) == 0) {
2089 if (b & 0x40) {
2090 /* Turn off PCI Bus Parking */
2091 pci_write_config_byte(dev, 0x76, b ^ 0x40);
2092
2093 dev_info(&dev->dev,
2094 "Disabling VIA CX700 PCI parking\n");
2095 }
2096 }
2097
2098 if (pci_read_config_byte(dev, 0x72, &b) == 0) {
2099 if (b != 0) {
2100 /* Turn off PCI Master read caching */
2101 pci_write_config_byte(dev, 0x72, 0x0);
2102
2103 /* Set PCI Master Bus time-out to "1x16 PCLK" */
2104 pci_write_config_byte(dev, 0x75, 0x1);
2105
2106 /* Disable "Read FIFO Timer" */
2107 pci_write_config_byte(dev, 0x77, 0x0);
2108
2109 dev_info(&dev->dev,
2110 "Disabling VIA CX700 PCI caching\n");
2111 }
2112 }
2113}
2114DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
2115
2116/*
2117 * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
2118 * VPD end tag will hang the device. This problem was initially
2119 * observed when a vpd entry was created in sysfs
2120 * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
2121 * will dump 32k of data. Reading a full 32k will cause an access
2122 * beyond the VPD end tag causing the device to hang. Once the device
2123 * is hung, the bnx2 driver will not be able to reset the device.
2124 * We believe that it is legal to read beyond the end tag and
2125 * therefore the solution is to limit the read/write length.
2126 */
2127static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
2128{
2129 /*
2130 * Only disable the VPD capability for 5706, 5706S, 5708,
2131 * 5708S and 5709 rev. A
2132 */
2133 if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
2134 (dev->device == PCI_DEVICE_ID_NX2_5706S) ||
2135 (dev->device == PCI_DEVICE_ID_NX2_5708) ||
2136 (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
2137 ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
2138 (dev->revision & 0xf0) == 0x0)) {
2139 if (dev->vpd)
2140 dev->vpd->len = 0x80;
2141 }
2142}
2143
2144DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2145 PCI_DEVICE_ID_NX2_5706,
2146 quirk_brcm_570x_limit_vpd);
2147DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2148 PCI_DEVICE_ID_NX2_5706S,
2149 quirk_brcm_570x_limit_vpd);
2150DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2151 PCI_DEVICE_ID_NX2_5708,
2152 quirk_brcm_570x_limit_vpd);
2153DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2154 PCI_DEVICE_ID_NX2_5708S,
2155 quirk_brcm_570x_limit_vpd);
2156DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2157 PCI_DEVICE_ID_NX2_5709,
2158 quirk_brcm_570x_limit_vpd);
2159DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2160 PCI_DEVICE_ID_NX2_5709S,
2161 quirk_brcm_570x_limit_vpd);
2162
2163/* Originally in EDAC sources for i82875P:
2164 * Intel tells BIOS developers to hide device 6 which
2165 * configures the overflow device access containing
2166 * the DRBs - this is where we expose device 6.
2167 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
2168 */
2169static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
2170{
2171 u8 reg;
2172
2173 if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) {
2174 dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n");
2175 pci_write_config_byte(dev, 0xF4, reg | 0x02);
2176 }
2177}
2178
2179DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
2180 quirk_unhide_mch_dev6);
2181DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
2182 quirk_unhide_mch_dev6);
2183
2184#ifdef CONFIG_TILE
2185/*
2186 * The Tilera TILEmpower platform needs to set the link speed
2187 * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
2188 * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
2189 * capability register of the PEX8624 PCIe switch. The switch
2190 * supports link speed auto negotiation, but falsely sets
2191 * the link speed to 5GT/s.
2192 */
2193static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
2194{
2195 if (tile_plx_gen1) {
2196 pci_write_config_dword(dev, 0x98, 0x1);
2197 mdelay(50);
2198 }
2199}
2200DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
2201#endif /* CONFIG_TILE */
2202
2203#ifdef CONFIG_PCI_MSI
2204/* Some chipsets do not support MSI. We cannot easily rely on setting
2205 * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
2206 * some other busses controlled by the chipset even if Linux is not
2207 * aware of it. Instead of setting the flag on all busses in the
2208 * machine, simply disable MSI globally.
2209 */
2210static void __init quirk_disable_all_msi(struct pci_dev *dev)
2211{
2212 pci_no_msi();
2213 dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n");
2214}
2215DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
2216DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
2217DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
2218DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
2219DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
2220DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
2221DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
2222
2223/* Disable MSI on chipsets that are known to not support it */
2224static void __devinit quirk_disable_msi(struct pci_dev *dev)
2225{
2226 if (dev->subordinate) {
2227 dev_warn(&dev->dev, "MSI quirk detected; "
2228 "subordinate MSI disabled\n");
2229 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
2230 }
2231}
2232DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
2233DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
2234DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi);
2235
2236/*
2237 * The APC bridge device in AMD 780 family northbridges has some random
2238 * OEM subsystem ID in its vendor ID register (erratum 18), so instead
2239 * we use the possible vendor/device IDs of the host bridge for the
2240 * declared quirk, and search for the APC bridge by slot number.
2241 */
2242static void __devinit quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
2243{
2244 struct pci_dev *apc_bridge;
2245
2246 apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0));
2247 if (apc_bridge) {
2248 if (apc_bridge->device == 0x9602)
2249 quirk_disable_msi(apc_bridge);
2250 pci_dev_put(apc_bridge);
2251 }
2252}
2253DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi);
2254DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi);
2255
2256/* Go through the list of Hypertransport capabilities and
2257 * return 1 if a HT MSI capability is found and enabled */
2258static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
2259{
2260 int pos, ttl = 48;
2261
2262 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
2263 while (pos && ttl--) {
2264 u8 flags;
2265
2266 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
2267 &flags) == 0)
2268 {
2269 dev_info(&dev->dev, "Found %s HT MSI Mapping\n",
2270 flags & HT_MSI_FLAGS_ENABLE ?
2271 "enabled" : "disabled");
2272 return (flags & HT_MSI_FLAGS_ENABLE) != 0;
2273 }
2274
2275 pos = pci_find_next_ht_capability(dev, pos,
2276 HT_CAPTYPE_MSI_MAPPING);
2277 }
2278 return 0;
2279}
2280
2281/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */
2282static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)
2283{
2284 if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
2285 dev_warn(&dev->dev, "MSI quirk detected; "
2286 "subordinate MSI disabled\n");
2287 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
2288 }
2289}
2290DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
2291 quirk_msi_ht_cap);
2292
2293/* The nVidia CK804 chipset may have 2 HT MSI mappings.
2294 * MSI are supported if the MSI capability set in any of these mappings.
2295 */
2296static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
2297{
2298 struct pci_dev *pdev;
2299
2300 if (!dev->subordinate)
2301 return;
2302
2303 /* check HT MSI cap on this chipset and the root one.
2304 * a single one having MSI is enough to be sure that MSI are supported.
2305 */
2306 pdev = pci_get_slot(dev->bus, 0);
2307 if (!pdev)
2308 return;
2309 if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) {
2310 dev_warn(&dev->dev, "MSI quirk detected; "
2311 "subordinate MSI disabled\n");
2312 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
2313 }
2314 pci_dev_put(pdev);
2315}
2316DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
2317 quirk_nvidia_ck804_msi_ht_cap);
2318
2319/* Force enable MSI mapping capability on HT bridges */
2320static void __devinit ht_enable_msi_mapping(struct pci_dev *dev)
2321{
2322 int pos, ttl = 48;
2323
2324 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
2325 while (pos && ttl--) {
2326 u8 flags;
2327
2328 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
2329 &flags) == 0) {
2330 dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
2331
2332 pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
2333 flags | HT_MSI_FLAGS_ENABLE);
2334 }
2335 pos = pci_find_next_ht_capability(dev, pos,
2336 HT_CAPTYPE_MSI_MAPPING);
2337 }
2338}
2339DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
2340 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
2341 ht_enable_msi_mapping);
2342
2343DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
2344 ht_enable_msi_mapping);
2345
2346/* The P5N32-SLI motherboards from Asus have a problem with msi
2347 * for the MCP55 NIC. It is not yet determined whether the msi problem
2348 * also affects other devices. As for now, turn off msi for this device.
2349 */
2350static void __devinit nvenet_msi_disable(struct pci_dev *dev)
2351{
2352 const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
2353
2354 if (board_name &&
2355 (strstr(board_name, "P5N32-SLI PREMIUM") ||
2356 strstr(board_name, "P5N32-E SLI"))) {
2357 dev_info(&dev->dev,
2358 "Disabling msi for MCP55 NIC on P5N32-SLI\n");
2359 dev->no_msi = 1;
2360 }
2361}
2362DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
2363 PCI_DEVICE_ID_NVIDIA_NVENET_15,
2364 nvenet_msi_disable);
2365
2366/*
2367 * Some versions of the MCP55 bridge from nvidia have a legacy irq routing
2368 * config register. This register controls the routing of legacy interrupts
2369 * from devices that route through the MCP55. If this register is misprogramed
2370 * interrupts are only sent to the bsp, unlike conventional systems where the
2371 * irq is broadxast to all online cpus. Not having this register set
2372 * properly prevents kdump from booting up properly, so lets make sure that
2373 * we have it set correctly.
2374 * Note this is an undocumented register.
2375 */
2376static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
2377{
2378 u32 cfg;
2379
2380 if (!pci_find_capability(dev, PCI_CAP_ID_HT))
2381 return;
2382
2383 pci_read_config_dword(dev, 0x74, &cfg);
2384
2385 if (cfg & ((1 << 2) | (1 << 15))) {
2386 printk(KERN_INFO "Rewriting irq routing register on MCP55\n");
2387 cfg &= ~((1 << 2) | (1 << 15));
2388 pci_write_config_dword(dev, 0x74, cfg);
2389 }
2390}
2391
2392DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
2393 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0,
2394 nvbridge_check_legacy_irq_routing);
2395
2396DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
2397 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4,
2398 nvbridge_check_legacy_irq_routing);
2399
2400static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
2401{
2402 int pos, ttl = 48;
2403 int found = 0;
2404
2405 /* check if there is HT MSI cap or enabled on this device */
2406 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
2407 while (pos && ttl--) {
2408 u8 flags;
2409
2410 if (found < 1)
2411 found = 1;
2412 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
2413 &flags) == 0) {
2414 if (flags & HT_MSI_FLAGS_ENABLE) {
2415 if (found < 2) {
2416 found = 2;
2417 break;
2418 }
2419 }
2420 }
2421 pos = pci_find_next_ht_capability(dev, pos,
2422 HT_CAPTYPE_MSI_MAPPING);
2423 }
2424
2425 return found;
2426}
2427
2428static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)
2429{
2430 struct pci_dev *dev;
2431 int pos;
2432 int i, dev_no;
2433 int found = 0;
2434
2435 dev_no = host_bridge->devfn >> 3;
2436 for (i = dev_no + 1; i < 0x20; i++) {
2437 dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0));
2438 if (!dev)
2439 continue;
2440
2441 /* found next host bridge ?*/
2442 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
2443 if (pos != 0) {
2444 pci_dev_put(dev);
2445 break;
2446 }
2447
2448 if (ht_check_msi_mapping(dev)) {
2449 found = 1;
2450 pci_dev_put(dev);
2451 break;
2452 }
2453 pci_dev_put(dev);
2454 }
2455
2456 return found;
2457}
2458
2459#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
2460#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
2461
2462static int __devinit is_end_of_ht_chain(struct pci_dev *dev)
2463{
2464 int pos, ctrl_off;
2465 int end = 0;
2466 u16 flags, ctrl;
2467
2468 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
2469
2470 if (!pos)
2471 goto out;
2472
2473 pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags);
2474
2475 ctrl_off = ((flags >> 10) & 1) ?
2476 PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1;
2477 pci_read_config_word(dev, pos + ctrl_off, &ctrl);
2478
2479 if (ctrl & (1 << 6))
2480 end = 1;
2481
2482out:
2483 return end;
2484}
2485
2486static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
2487{
2488 struct pci_dev *host_bridge;
2489 int pos;
2490 int i, dev_no;
2491 int found = 0;
2492
2493 dev_no = dev->devfn >> 3;
2494 for (i = dev_no; i >= 0; i--) {
2495 host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
2496 if (!host_bridge)
2497 continue;
2498
2499 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
2500 if (pos != 0) {
2501 found = 1;
2502 break;
2503 }
2504 pci_dev_put(host_bridge);
2505 }
2506
2507 if (!found)
2508 return;
2509
2510 /* don't enable end_device/host_bridge with leaf directly here */
2511 if (host_bridge == dev && is_end_of_ht_chain(host_bridge) &&
2512 host_bridge_with_leaf(host_bridge))
2513 goto out;
2514
2515 /* root did that ! */
2516 if (msi_ht_cap_enabled(host_bridge))
2517 goto out;
2518
2519 ht_enable_msi_mapping(dev);
2520
2521out:
2522 pci_dev_put(host_bridge);
2523}
2524
2525static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
2526{
2527 int pos, ttl = 48;
2528
2529 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
2530 while (pos && ttl--) {
2531 u8 flags;
2532
2533 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
2534 &flags) == 0) {
2535 dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
2536
2537 pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
2538 flags & ~HT_MSI_FLAGS_ENABLE);
2539 }
2540 pos = pci_find_next_ht_capability(dev, pos,
2541 HT_CAPTYPE_MSI_MAPPING);
2542 }
2543}
2544
2545static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
2546{
2547 struct pci_dev *host_bridge;
2548 int pos;
2549 int found;
2550
2551 if (!pci_msi_enabled())
2552 return;
2553
2554 /* check if there is HT MSI cap or enabled on this device */
2555 found = ht_check_msi_mapping(dev);
2556
2557 /* no HT MSI CAP */
2558 if (found == 0)
2559 return;
2560
2561 /*
2562 * HT MSI mapping should be disabled on devices that are below
2563 * a non-Hypertransport host bridge. Locate the host bridge...
2564 */
2565 host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
2566 if (host_bridge == NULL) {
2567 dev_warn(&dev->dev,
2568 "nv_msi_ht_cap_quirk didn't locate host bridge\n");
2569 return;
2570 }
2571
2572 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
2573 if (pos != 0) {
2574 /* Host bridge is to HT */
2575 if (found == 1) {
2576 /* it is not enabled, try to enable it */
2577 if (all)
2578 ht_enable_msi_mapping(dev);
2579 else
2580 nv_ht_enable_msi_mapping(dev);
2581 }
2582 return;
2583 }
2584
2585 /* HT MSI is not enabled */
2586 if (found == 1)
2587 return;
2588
2589 /* Host bridge is not to HT, disable HT MSI mapping on this device */
2590 ht_disable_msi_mapping(dev);
2591}
2592
2593static void __devinit nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
2594{
2595 return __nv_msi_ht_cap_quirk(dev, 1);
2596}
2597
2598static void __devinit nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
2599{
2600 return __nv_msi_ht_cap_quirk(dev, 0);
2601}
2602
2603DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
2604DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
2605
2606DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
2607DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
2608
2609static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
2610{
2611 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
2612}
2613static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
2614{
2615 struct pci_dev *p;
2616
2617 /* SB700 MSI issue will be fixed at HW level from revision A21,
2618 * we need check PCI REVISION ID of SMBus controller to get SB700
2619 * revision.
2620 */
2621 p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
2622 NULL);
2623 if (!p)
2624 return;
2625
2626 if ((p->revision < 0x3B) && (p->revision >= 0x30))
2627 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
2628 pci_dev_put(p);
2629}
2630DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2631 PCI_DEVICE_ID_TIGON3_5780,
2632 quirk_msi_intx_disable_bug);
2633DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2634 PCI_DEVICE_ID_TIGON3_5780S,
2635 quirk_msi_intx_disable_bug);
2636DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2637 PCI_DEVICE_ID_TIGON3_5714,
2638 quirk_msi_intx_disable_bug);
2639DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2640 PCI_DEVICE_ID_TIGON3_5714S,
2641 quirk_msi_intx_disable_bug);
2642DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2643 PCI_DEVICE_ID_TIGON3_5715,
2644 quirk_msi_intx_disable_bug);
2645DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
2646 PCI_DEVICE_ID_TIGON3_5715S,
2647 quirk_msi_intx_disable_bug);
2648
2649DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
2650 quirk_msi_intx_disable_ati_bug);
2651DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391,
2652 quirk_msi_intx_disable_ati_bug);
2653DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392,
2654 quirk_msi_intx_disable_ati_bug);
2655DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393,
2656 quirk_msi_intx_disable_ati_bug);
2657DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394,
2658 quirk_msi_intx_disable_ati_bug);
2659
2660DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373,
2661 quirk_msi_intx_disable_bug);
2662DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374,
2663 quirk_msi_intx_disable_bug);
2664DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
2665 quirk_msi_intx_disable_bug);
2666
2667#endif /* CONFIG_PCI_MSI */
2668
2669/* Allow manual resource allocation for PCI hotplug bridges
2670 * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For
2671 * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6),
2672 * kernel fails to allocate resources when hotplug device is
2673 * inserted and PCI bus is rescanned.
2674 */
2675static void __devinit quirk_hotplug_bridge(struct pci_dev *dev)
2676{
2677 dev->is_hotplug_bridge = 1;
2678}
2679
2680DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
2681
2682/*
2683 * This is a quirk for the Ricoh MMC controller found as a part of
2684 * some mulifunction chips.
2685
2686 * This is very similar and based on the ricoh_mmc driver written by
2687 * Philip Langdale. Thank you for these magic sequences.
2688 *
2689 * These chips implement the four main memory card controllers (SD, MMC, MS, xD)
2690 * and one or both of cardbus or firewire.
2691 *
2692 * It happens that they implement SD and MMC
2693 * support as separate controllers (and PCI functions). The linux SDHCI
2694 * driver supports MMC cards but the chip detects MMC cards in hardware
2695 * and directs them to the MMC controller - so the SDHCI driver never sees
2696 * them.
2697 *
2698 * To get around this, we must disable the useless MMC controller.
2699 * At that point, the SDHCI controller will start seeing them
2700 * It seems to be the case that the relevant PCI registers to deactivate the
2701 * MMC controller live on PCI function 0, which might be the cardbus controller
2702 * or the firewire controller, depending on the particular chip in question
2703 *
2704 * This has to be done early, because as soon as we disable the MMC controller
2705 * other pci functions shift up one level, e.g. function #2 becomes function
2706 * #1, and this will confuse the pci core.
2707 */
2708
2709#ifdef CONFIG_MMC_RICOH_MMC
2710static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev)
2711{
2712 /* disable via cardbus interface */
2713 u8 write_enable;
2714 u8 write_target;
2715 u8 disable;
2716
2717 /* disable must be done via function #0 */
2718 if (PCI_FUNC(dev->devfn))
2719 return;
2720
2721 pci_read_config_byte(dev, 0xB7, &disable);
2722 if (disable & 0x02)
2723 return;
2724
2725 pci_read_config_byte(dev, 0x8E, &write_enable);
2726 pci_write_config_byte(dev, 0x8E, 0xAA);
2727 pci_read_config_byte(dev, 0x8D, &write_target);
2728 pci_write_config_byte(dev, 0x8D, 0xB7);
2729 pci_write_config_byte(dev, 0xB7, disable | 0x02);
2730 pci_write_config_byte(dev, 0x8E, write_enable);
2731 pci_write_config_byte(dev, 0x8D, write_target);
2732
2733 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n");
2734 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
2735}
2736DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
2737DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
2738
2739static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
2740{
2741 /* disable via firewire interface */
2742 u8 write_enable;
2743 u8 disable;
2744
2745 /* disable must be done via function #0 */
2746 if (PCI_FUNC(dev->devfn))
2747 return;
2748
2749 pci_read_config_byte(dev, 0xCB, &disable);
2750
2751 if (disable & 0x02)
2752 return;
2753
2754 pci_read_config_byte(dev, 0xCA, &write_enable);
2755 pci_write_config_byte(dev, 0xCA, 0x57);
2756 pci_write_config_byte(dev, 0xCB, disable | 0x02);
2757 pci_write_config_byte(dev, 0xCA, write_enable);
2758
2759 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
2760 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
2761
2762 /*
2763 * RICOH 0xe823 SD/MMC card reader fails to recognize
2764 * certain types of SD/MMC cards. Lowering the SD base
2765 * clock frequency from 200Mhz to 50Mhz fixes this issue.
2766 *
2767 * 0x150 - SD2.0 mode enable for changing base clock
2768 * frequency to 50Mhz
2769 * 0xe1 - Base clock frequency
2770 * 0x32 - 50Mhz new clock frequency
2771 * 0xf9 - Key register for 0x150
2772 * 0xfc - key register for 0xe1
2773 */
2774 if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
2775 pci_write_config_byte(dev, 0xf9, 0xfc);
2776 pci_write_config_byte(dev, 0x150, 0x10);
2777 pci_write_config_byte(dev, 0xf9, 0x00);
2778 pci_write_config_byte(dev, 0xfc, 0x01);
2779 pci_write_config_byte(dev, 0xe1, 0x32);
2780 pci_write_config_byte(dev, 0xfc, 0x00);
2781
2782 dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
2783 }
2784}
2785DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
2786DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
2787DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
2788DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
2789#endif /*CONFIG_MMC_RICOH_MMC*/
2790
2791#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
2792#define VTUNCERRMSK_REG 0x1ac
2793#define VTD_MSK_SPEC_ERRORS (1 << 31)
2794/*
2795 * This is a quirk for masking vt-d spec defined errors to platform error
2796 * handling logic. With out this, platforms using Intel 7500, 5500 chipsets
2797 * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
2798 * on the RAS config settings of the platform) when a vt-d fault happens.
2799 * The resulting SMI caused the system to hang.
2800 *
2801 * VT-d spec related errors are already handled by the VT-d OS code, so no
2802 * need to report the same error through other channels.
2803 */
2804static void vtd_mask_spec_errors(struct pci_dev *dev)
2805{
2806 u32 word;
2807
2808 pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
2809 pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
2810}
2811DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
2812DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
2813#endif
2814
2815static void __devinit fixup_ti816x_class(struct pci_dev* dev)
2816{
2817 /* TI 816x devices do not have class code set when in PCIe boot mode */
2818 if (dev->class == PCI_CLASS_NOT_DEFINED) {
2819 dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
2820 dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
2821 }
2822}
2823DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
2824
2825static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
2826 struct pci_fixup *end)
2827{
2828 while (f < end) {
2829 if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) &&
2830 (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) {
2831 dev_dbg(&dev->dev, "calling %pF\n", f->hook);
2832 f->hook(dev);
2833 }
2834 f++;
2835 }
2836}
2837
2838extern struct pci_fixup __start_pci_fixups_early[];
2839extern struct pci_fixup __end_pci_fixups_early[];
2840extern struct pci_fixup __start_pci_fixups_header[];
2841extern struct pci_fixup __end_pci_fixups_header[];
2842extern struct pci_fixup __start_pci_fixups_final[];
2843extern struct pci_fixup __end_pci_fixups_final[];
2844extern struct pci_fixup __start_pci_fixups_enable[];
2845extern struct pci_fixup __end_pci_fixups_enable[];
2846extern struct pci_fixup __start_pci_fixups_resume[];
2847extern struct pci_fixup __end_pci_fixups_resume[];
2848extern struct pci_fixup __start_pci_fixups_resume_early[];
2849extern struct pci_fixup __end_pci_fixups_resume_early[];
2850extern struct pci_fixup __start_pci_fixups_suspend[];
2851extern struct pci_fixup __end_pci_fixups_suspend[];
2852
2853
2854void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
2855{
2856 struct pci_fixup *start, *end;
2857
2858 switch(pass) {
2859 case pci_fixup_early:
2860 start = __start_pci_fixups_early;
2861 end = __end_pci_fixups_early;
2862 break;
2863
2864 case pci_fixup_header:
2865 start = __start_pci_fixups_header;
2866 end = __end_pci_fixups_header;
2867 break;
2868
2869 case pci_fixup_final:
2870 start = __start_pci_fixups_final;
2871 end = __end_pci_fixups_final;
2872 break;
2873
2874 case pci_fixup_enable:
2875 start = __start_pci_fixups_enable;
2876 end = __end_pci_fixups_enable;
2877 break;
2878
2879 case pci_fixup_resume:
2880 start = __start_pci_fixups_resume;
2881 end = __end_pci_fixups_resume;
2882 break;
2883
2884 case pci_fixup_resume_early:
2885 start = __start_pci_fixups_resume_early;
2886 end = __end_pci_fixups_resume_early;
2887 break;
2888
2889 case pci_fixup_suspend:
2890 start = __start_pci_fixups_suspend;
2891 end = __end_pci_fixups_suspend;
2892 break;
2893
2894 default:
2895 /* stupid compiler warning, you would think with an enum... */
2896 return;
2897 }
2898 pci_do_fixups(dev, start, end);
2899}
2900EXPORT_SYMBOL(pci_fixup_device);
2901
2902static int __init pci_apply_final_quirks(void)
2903{
2904 struct pci_dev *dev = NULL;
2905 u8 cls = 0;
2906 u8 tmp;
2907
2908 if (pci_cache_line_size)
2909 printk(KERN_DEBUG "PCI: CLS %u bytes\n",
2910 pci_cache_line_size << 2);
2911
2912 for_each_pci_dev(dev) {
2913 pci_fixup_device(pci_fixup_final, dev);
2914 /*
2915 * If arch hasn't set it explicitly yet, use the CLS
2916 * value shared by all PCI devices. If there's a
2917 * mismatch, fall back to the default value.
2918 */
2919 if (!pci_cache_line_size) {
2920 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp);
2921 if (!cls)
2922 cls = tmp;
2923 if (!tmp || cls == tmp)
2924 continue;
2925
2926 printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), "
2927 "using %u bytes\n", cls << 2, tmp << 2,
2928 pci_dfl_cache_line_size << 2);
2929 pci_cache_line_size = pci_dfl_cache_line_size;
2930 }
2931 }
2932 if (!pci_cache_line_size) {
2933 printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
2934 cls << 2, pci_dfl_cache_line_size << 2);
2935 pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
2936 }
2937
2938 return 0;
2939}
2940
2941fs_initcall_sync(pci_apply_final_quirks);
2942
2943/*
2944 * Followings are device-specific reset methods which can be used to
2945 * reset a single function if other methods (e.g. FLR, PM D0->D3) are
2946 * not available.
2947 */
2948static int reset_intel_generic_dev(struct pci_dev *dev, int probe)
2949{
2950 int pos;
2951
2952 /* only implement PCI_CLASS_SERIAL_USB at present */
2953 if (dev->class == PCI_CLASS_SERIAL_USB) {
2954 pos = pci_find_capability(dev, PCI_CAP_ID_VNDR);
2955 if (!pos)
2956 return -ENOTTY;
2957
2958 if (probe)
2959 return 0;
2960
2961 pci_write_config_byte(dev, pos + 0x4, 1);
2962 msleep(100);
2963
2964 return 0;
2965 } else {
2966 return -ENOTTY;
2967 }
2968}
2969
2970static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
2971{
2972 int pos;
2973
2974 pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
2975 if (!pos)
2976 return -ENOTTY;
2977
2978 if (probe)
2979 return 0;
2980
2981 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
2982 PCI_EXP_DEVCTL_BCR_FLR);
2983 msleep(100);
2984
2985 return 0;
2986}
2987
2988#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
2989
2990static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
2991 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
2992 reset_intel_82599_sfp_virtfn },
2993 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
2994 reset_intel_generic_dev },
2995 { 0 }
2996};
2997
2998int pci_dev_specific_reset(struct pci_dev *dev, int probe)
2999{
3000 const struct pci_dev_reset_methods *i;
3001
3002 for (i = pci_dev_reset_methods; i->reset; i++) {
3003 if ((i->vendor == dev->vendor ||
3004 i->vendor == (u16)PCI_ANY_ID) &&
3005 (i->device == dev->device ||
3006 i->device == (u16)PCI_ANY_ID))
3007 return i->reset(dev, probe);
3008 }
3009
3010 return -ENOTTY;
3011}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * This file contains work-arounds for many known PCI hardware bugs.
4 * Devices present only on certain architectures (host bridges et cetera)
5 * should be handled in arch-specific code.
6 *
7 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
8 *
9 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
10 *
11 * Init/reset quirks for USB host controllers should be in the USB quirks
12 * file, where their drivers can use them.
13 */
14
15#include <linux/align.h>
16#include <linux/bitfield.h>
17#include <linux/types.h>
18#include <linux/kernel.h>
19#include <linux/export.h>
20#include <linux/pci.h>
21#include <linux/isa-dma.h> /* isa_dma_bridge_buggy */
22#include <linux/init.h>
23#include <linux/delay.h>
24#include <linux/acpi.h>
25#include <linux/dmi.h>
26#include <linux/ioport.h>
27#include <linux/sched.h>
28#include <linux/ktime.h>
29#include <linux/mm.h>
30#include <linux/nvme.h>
31#include <linux/platform_data/x86/apple.h>
32#include <linux/pm_runtime.h>
33#include <linux/sizes.h>
34#include <linux/suspend.h>
35#include <linux/switchtec.h>
36#include "pci.h"
37
38static bool pcie_lbms_seen(struct pci_dev *dev, u16 lnksta)
39{
40 unsigned long count;
41 int ret;
42
43 ret = pcie_lbms_count(dev, &count);
44 if (ret < 0)
45 return lnksta & PCI_EXP_LNKSTA_LBMS;
46
47 return count > 0;
48}
49
50/*
51 * Retrain the link of a downstream PCIe port by hand if necessary.
52 *
53 * This is needed at least where a downstream port of the ASMedia ASM2824
54 * Gen 3 switch is wired to the upstream port of the Pericom PI7C9X2G304
55 * Gen 2 switch, and observed with the Delock Riser Card PCI Express x1 >
56 * 2 x PCIe x1 device, P/N 41433, plugged into the SiFive HiFive Unmatched
57 * board.
58 *
59 * In such a configuration the switches are supposed to negotiate the link
60 * speed of preferably 5.0GT/s, falling back to 2.5GT/s. However the link
61 * continues switching between the two speeds indefinitely and the data
62 * link layer never reaches the active state, with link training reported
63 * repeatedly active ~84% of the time. Forcing the target link speed to
64 * 2.5GT/s with the upstream ASM2824 device makes the two switches talk to
65 * each other correctly however. And more interestingly retraining with a
66 * higher target link speed afterwards lets the two successfully negotiate
67 * 5.0GT/s.
68 *
69 * With the ASM2824 we can rely on the otherwise optional Data Link Layer
70 * Link Active status bit and in the failed link training scenario it will
71 * be off along with the Link Bandwidth Management Status indicating that
72 * hardware has changed the link speed or width in an attempt to correct
73 * unreliable link operation. For a port that has been left unconnected
74 * both bits will be clear. So use this information to detect the problem
75 * rather than polling the Link Training bit and watching out for flips or
76 * at least the active status.
77 *
78 * Since the exact nature of the problem isn't known and in principle this
79 * could trigger where an ASM2824 device is downstream rather upstream,
80 * apply this erratum workaround to any downstream ports as long as they
81 * support Link Active reporting and have the Link Control 2 register.
82 * Restrict the speed to 2.5GT/s then with the Target Link Speed field,
83 * request a retrain and check the result.
84 *
85 * If this turns out successful and we know by the Vendor:Device ID it is
86 * safe to do so, then lift the restriction, letting the devices negotiate
87 * a higher speed. Also check for a similar 2.5GT/s speed restriction the
88 * firmware may have already arranged and lift it with ports that already
89 * report their data link being up.
90 *
91 * Otherwise revert the speed to the original setting and request a retrain
92 * again to remove any residual state, ignoring the result as it's supposed
93 * to fail anyway.
94 *
95 * Return 0 if the link has been successfully retrained. Return an error
96 * if retraining was not needed or we attempted a retrain and it failed.
97 */
98int pcie_failed_link_retrain(struct pci_dev *dev)
99{
100 static const struct pci_device_id ids[] = {
101 { PCI_VDEVICE(ASMEDIA, 0x2824) }, /* ASMedia ASM2824 */
102 {}
103 };
104 u16 lnksta, lnkctl2;
105 int ret = -ENOTTY;
106
107 if (!pci_is_pcie(dev) || !pcie_downstream_port(dev) ||
108 !pcie_cap_has_lnkctl2(dev) || !dev->link_active_reporting)
109 return ret;
110
111 pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2);
112 pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
113 if (!(lnksta & PCI_EXP_LNKSTA_DLLLA) && pcie_lbms_seen(dev, lnksta)) {
114 u16 oldlnkctl2 = lnkctl2;
115
116 pci_info(dev, "broken device, retraining non-functional downstream link at 2.5GT/s\n");
117
118 ret = pcie_set_target_speed(dev, PCIE_SPEED_2_5GT, false);
119 if (ret) {
120 pci_info(dev, "retraining failed\n");
121 pcie_set_target_speed(dev, PCIE_LNKCTL2_TLS2SPEED(oldlnkctl2),
122 true);
123 return ret;
124 }
125
126 pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
127 }
128
129 if ((lnksta & PCI_EXP_LNKSTA_DLLLA) &&
130 (lnkctl2 & PCI_EXP_LNKCTL2_TLS) == PCI_EXP_LNKCTL2_TLS_2_5GT &&
131 pci_match_id(ids, dev)) {
132 u32 lnkcap;
133
134 pci_info(dev, "removing 2.5GT/s downstream link speed restriction\n");
135 pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap);
136 ret = pcie_set_target_speed(dev, PCIE_LNKCAP_SLS2SPEED(lnkcap), false);
137 if (ret) {
138 pci_info(dev, "retraining failed\n");
139 return ret;
140 }
141 }
142
143 return ret;
144}
145
146static ktime_t fixup_debug_start(struct pci_dev *dev,
147 void (*fn)(struct pci_dev *dev))
148{
149 if (initcall_debug)
150 pci_info(dev, "calling %pS @ %i\n", fn, task_pid_nr(current));
151
152 return ktime_get();
153}
154
155static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
156 void (*fn)(struct pci_dev *dev))
157{
158 ktime_t delta, rettime;
159 unsigned long long duration;
160
161 rettime = ktime_get();
162 delta = ktime_sub(rettime, calltime);
163 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
164 if (initcall_debug || duration > 10000)
165 pci_info(dev, "%pS took %lld usecs\n", fn, duration);
166}
167
168static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
169 struct pci_fixup *end)
170{
171 ktime_t calltime;
172
173 for (; f < end; f++)
174 if ((f->class == (u32) (dev->class >> f->class_shift) ||
175 f->class == (u32) PCI_ANY_ID) &&
176 (f->vendor == dev->vendor ||
177 f->vendor == (u16) PCI_ANY_ID) &&
178 (f->device == dev->device ||
179 f->device == (u16) PCI_ANY_ID)) {
180 void (*hook)(struct pci_dev *dev);
181#ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
182 hook = offset_to_ptr(&f->hook_offset);
183#else
184 hook = f->hook;
185#endif
186 calltime = fixup_debug_start(dev, hook);
187 hook(dev);
188 fixup_debug_report(dev, calltime, hook);
189 }
190}
191
192extern struct pci_fixup __start_pci_fixups_early[];
193extern struct pci_fixup __end_pci_fixups_early[];
194extern struct pci_fixup __start_pci_fixups_header[];
195extern struct pci_fixup __end_pci_fixups_header[];
196extern struct pci_fixup __start_pci_fixups_final[];
197extern struct pci_fixup __end_pci_fixups_final[];
198extern struct pci_fixup __start_pci_fixups_enable[];
199extern struct pci_fixup __end_pci_fixups_enable[];
200extern struct pci_fixup __start_pci_fixups_resume[];
201extern struct pci_fixup __end_pci_fixups_resume[];
202extern struct pci_fixup __start_pci_fixups_resume_early[];
203extern struct pci_fixup __end_pci_fixups_resume_early[];
204extern struct pci_fixup __start_pci_fixups_suspend[];
205extern struct pci_fixup __end_pci_fixups_suspend[];
206extern struct pci_fixup __start_pci_fixups_suspend_late[];
207extern struct pci_fixup __end_pci_fixups_suspend_late[];
208
209static bool pci_apply_fixup_final_quirks;
210
211void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
212{
213 struct pci_fixup *start, *end;
214
215 switch (pass) {
216 case pci_fixup_early:
217 start = __start_pci_fixups_early;
218 end = __end_pci_fixups_early;
219 break;
220
221 case pci_fixup_header:
222 start = __start_pci_fixups_header;
223 end = __end_pci_fixups_header;
224 break;
225
226 case pci_fixup_final:
227 if (!pci_apply_fixup_final_quirks)
228 return;
229 start = __start_pci_fixups_final;
230 end = __end_pci_fixups_final;
231 break;
232
233 case pci_fixup_enable:
234 start = __start_pci_fixups_enable;
235 end = __end_pci_fixups_enable;
236 break;
237
238 case pci_fixup_resume:
239 start = __start_pci_fixups_resume;
240 end = __end_pci_fixups_resume;
241 break;
242
243 case pci_fixup_resume_early:
244 start = __start_pci_fixups_resume_early;
245 end = __end_pci_fixups_resume_early;
246 break;
247
248 case pci_fixup_suspend:
249 start = __start_pci_fixups_suspend;
250 end = __end_pci_fixups_suspend;
251 break;
252
253 case pci_fixup_suspend_late:
254 start = __start_pci_fixups_suspend_late;
255 end = __end_pci_fixups_suspend_late;
256 break;
257
258 default:
259 /* stupid compiler warning, you would think with an enum... */
260 return;
261 }
262 pci_do_fixups(dev, start, end);
263}
264EXPORT_SYMBOL(pci_fixup_device);
265
266static int __init pci_apply_final_quirks(void)
267{
268 struct pci_dev *dev = NULL;
269 u8 cls = 0;
270 u8 tmp;
271
272 if (pci_cache_line_size)
273 pr_info("PCI: CLS %u bytes\n", pci_cache_line_size << 2);
274
275 pci_apply_fixup_final_quirks = true;
276 for_each_pci_dev(dev) {
277 pci_fixup_device(pci_fixup_final, dev);
278 /*
279 * If arch hasn't set it explicitly yet, use the CLS
280 * value shared by all PCI devices. If there's a
281 * mismatch, fall back to the default value.
282 */
283 if (!pci_cache_line_size) {
284 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp);
285 if (!cls)
286 cls = tmp;
287 if (!tmp || cls == tmp)
288 continue;
289
290 pci_info(dev, "CLS mismatch (%u != %u), using %u bytes\n",
291 cls << 2, tmp << 2,
292 pci_dfl_cache_line_size << 2);
293 pci_cache_line_size = pci_dfl_cache_line_size;
294 }
295 }
296
297 if (!pci_cache_line_size) {
298 pr_info("PCI: CLS %u bytes, default %u\n", cls << 2,
299 pci_dfl_cache_line_size << 2);
300 pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
301 }
302
303 return 0;
304}
305fs_initcall_sync(pci_apply_final_quirks);
306
307/*
308 * Decoding should be disabled for a PCI device during BAR sizing to avoid
309 * conflict. But doing so may cause problems on host bridge and perhaps other
310 * key system devices. For devices that need to have mmio decoding always-on,
311 * we need to set the dev->mmio_always_on bit.
312 */
313static void quirk_mmio_always_on(struct pci_dev *dev)
314{
315 dev->mmio_always_on = 1;
316}
317DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
318 PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
319
320/*
321 * The Mellanox Tavor device gives false positive parity errors. Disable
322 * parity error reporting.
323 */
324DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, pci_disable_parity);
325DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, pci_disable_parity);
326
327/*
328 * Deal with broken BIOSes that neglect to enable passive release,
329 * which can cause problems in combination with the 82441FX/PPro MTRRs
330 */
331static void quirk_passive_release(struct pci_dev *dev)
332{
333 struct pci_dev *d = NULL;
334 unsigned char dlc;
335
336 /*
337 * We have to make sure a particular bit is set in the PIIX3
338 * ISA bridge, so we have to go out and find it.
339 */
340 while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) {
341 pci_read_config_byte(d, 0x82, &dlc);
342 if (!(dlc & 1<<1)) {
343 pci_info(d, "PIIX3: Enabling Passive Release\n");
344 dlc |= 1<<1;
345 pci_write_config_byte(d, 0x82, dlc);
346 }
347 }
348}
349DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
350DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
351
352#ifdef CONFIG_X86_32
353/*
354 * The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a
355 * workaround but VIA don't answer queries. If you happen to have good
356 * contacts at VIA ask them for me please -- Alan
357 *
358 * This appears to be BIOS not version dependent. So presumably there is a
359 * chipset level fix.
360 */
361static void quirk_isa_dma_hangs(struct pci_dev *dev)
362{
363 if (!isa_dma_bridge_buggy) {
364 isa_dma_bridge_buggy = 1;
365 pci_info(dev, "Activating ISA DMA hang workarounds\n");
366 }
367}
368/*
369 * It's not totally clear which chipsets are the problematic ones. We know
370 * 82C586 and 82C596 variants are affected.
371 */
372DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs);
373DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs);
374DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs);
375DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs);
376DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs);
377DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
378DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
379#endif
380
381#ifdef CONFIG_HAS_IOPORT
382/*
383 * Intel NM10 "Tiger Point" LPC PM1a_STS.BM_STS must be clear
384 * for some HT machines to use C4 w/o hanging.
385 */
386static void quirk_tigerpoint_bm_sts(struct pci_dev *dev)
387{
388 u32 pmbase;
389 u16 pm1a;
390
391 pci_read_config_dword(dev, 0x40, &pmbase);
392 pmbase = pmbase & 0xff80;
393 pm1a = inw(pmbase);
394
395 if (pm1a & 0x10) {
396 pci_info(dev, FW_BUG "Tiger Point LPC.BM_STS cleared\n");
397 outw(0x10, pmbase);
398 }
399}
400DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
401#endif
402
403/* Chipsets where PCI->PCI transfers vanish or hang */
404static void quirk_nopcipci(struct pci_dev *dev)
405{
406 if ((pci_pci_problems & PCIPCI_FAIL) == 0) {
407 pci_info(dev, "Disabling direct PCI/PCI transfers\n");
408 pci_pci_problems |= PCIPCI_FAIL;
409 }
410}
411DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci);
412DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci);
413
414static void quirk_nopciamd(struct pci_dev *dev)
415{
416 u8 rev;
417 pci_read_config_byte(dev, 0x08, &rev);
418 if (rev == 0x13) {
419 /* Erratum 24 */
420 pci_info(dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n");
421 pci_pci_problems |= PCIAGP_FAIL;
422 }
423}
424DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd);
425
426/* Triton requires workarounds to be used by the drivers */
427static void quirk_triton(struct pci_dev *dev)
428{
429 if ((pci_pci_problems&PCIPCI_TRITON) == 0) {
430 pci_info(dev, "Limiting direct PCI/PCI transfers\n");
431 pci_pci_problems |= PCIPCI_TRITON;
432 }
433}
434DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton);
435DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton);
436DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton);
437DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton);
438
439/*
440 * VIA Apollo KT133 needs PCI latency patch
441 * Made according to a Windows driver-based patch by George E. Breese;
442 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
443 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for the info on
444 * which Mr Breese based his work.
445 *
446 * Updated based on further information from the site and also on
447 * information provided by VIA
448 */
449static void quirk_vialatency(struct pci_dev *dev)
450{
451 struct pci_dev *p;
452 u8 busarb;
453
454 /*
455 * Ok, we have a potential problem chipset here. Now see if we have
456 * a buggy southbridge.
457 */
458 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL);
459 if (p != NULL) {
460
461 /*
462 * 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A;
463 * thanks Dan Hollis.
464 * Check for buggy part revisions
465 */
466 if (p->revision < 0x40 || p->revision > 0x42)
467 goto exit;
468 } else {
469 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
470 if (p == NULL) /* No problem parts */
471 goto exit;
472
473 /* Check for buggy part revisions */
474 if (p->revision < 0x10 || p->revision > 0x12)
475 goto exit;
476 }
477
478 /*
479 * Ok we have the problem. Now set the PCI master grant to occur
480 * every master grant. The apparent bug is that under high PCI load
481 * (quite common in Linux of course) you can get data loss when the
482 * CPU is held off the bus for 3 bus master requests. This happens
483 * to include the IDE controllers....
484 *
485 * VIA only apply this fix when an SB Live! is present but under
486 * both Linux and Windows this isn't enough, and we have seen
487 * corruption without SB Live! but with things like 3 UDMA IDE
488 * controllers. So we ignore that bit of the VIA recommendation..
489 */
490 pci_read_config_byte(dev, 0x76, &busarb);
491
492 /*
493 * Set bit 4 and bit 5 of byte 76 to 0x01
494 * "Master priority rotation on every PCI master grant"
495 */
496 busarb &= ~(1<<5);
497 busarb |= (1<<4);
498 pci_write_config_byte(dev, 0x76, busarb);
499 pci_info(dev, "Applying VIA southbridge workaround\n");
500exit:
501 pci_dev_put(p);
502}
503DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
504DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
505DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
506/* Must restore this on a resume from RAM */
507DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
508DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
509DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
510
511/* VIA Apollo VP3 needs ETBF on BT848/878 */
512static void quirk_viaetbf(struct pci_dev *dev)
513{
514 if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) {
515 pci_info(dev, "Limiting direct PCI/PCI transfers\n");
516 pci_pci_problems |= PCIPCI_VIAETBF;
517 }
518}
519DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf);
520
521static void quirk_vsfx(struct pci_dev *dev)
522{
523 if ((pci_pci_problems&PCIPCI_VSFX) == 0) {
524 pci_info(dev, "Limiting direct PCI/PCI transfers\n");
525 pci_pci_problems |= PCIPCI_VSFX;
526 }
527}
528DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx);
529
530/*
531 * ALi Magik requires workarounds to be used by the drivers that DMA to AGP
532 * space. Latency must be set to 0xA and Triton workaround applied too.
533 * [Info kindly provided by ALi]
534 */
535static void quirk_alimagik(struct pci_dev *dev)
536{
537 if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) {
538 pci_info(dev, "Limiting direct PCI/PCI transfers\n");
539 pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON;
540 }
541}
542DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik);
543DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik);
544
545/* Natoma has some interesting boundary conditions with Zoran stuff at least */
546static void quirk_natoma(struct pci_dev *dev)
547{
548 if ((pci_pci_problems&PCIPCI_NATOMA) == 0) {
549 pci_info(dev, "Limiting direct PCI/PCI transfers\n");
550 pci_pci_problems |= PCIPCI_NATOMA;
551 }
552}
553DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma);
554DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma);
555DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma);
556DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma);
557DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma);
558DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma);
559
560/*
561 * This chip can cause PCI parity errors if config register 0xA0 is read
562 * while DMAs are occurring.
563 */
564static void quirk_citrine(struct pci_dev *dev)
565{
566 dev->cfg_size = 0xA0;
567}
568DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine);
569
570/*
571 * This chip can cause bus lockups if config addresses above 0x600
572 * are read or written.
573 */
574static void quirk_nfp6000(struct pci_dev *dev)
575{
576 dev->cfg_size = 0x600;
577}
578DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000);
579DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000);
580DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP5000, quirk_nfp6000);
581DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000);
582
583/* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */
584static void quirk_extend_bar_to_page(struct pci_dev *dev)
585{
586 int i;
587
588 for (i = 0; i < PCI_STD_NUM_BARS; i++) {
589 struct resource *r = &dev->resource[i];
590 const char *r_name = pci_resource_name(dev, i);
591
592 if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) {
593 resource_set_range(r, 0, PAGE_SIZE);
594 r->flags |= IORESOURCE_UNSET;
595 pci_info(dev, "%s %pR: expanded to page size\n",
596 r_name, r);
597 }
598 }
599}
600DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page);
601
602/*
603 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
604 * If it's needed, re-allocate the region.
605 */
606static void quirk_s3_64M(struct pci_dev *dev)
607{
608 struct resource *r = &dev->resource[0];
609
610 if (!IS_ALIGNED(r->start, SZ_64M) || resource_size(r) != SZ_64M) {
611 r->flags |= IORESOURCE_UNSET;
612 resource_set_range(r, 0, SZ_64M);
613 }
614}
615DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
616DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
617
618static void quirk_io(struct pci_dev *dev, int pos, unsigned int size,
619 const char *name)
620{
621 u32 region;
622 struct pci_bus_region bus_region;
623 struct resource *res = dev->resource + pos;
624 const char *res_name = pci_resource_name(dev, pos);
625
626 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion);
627
628 if (!region)
629 return;
630
631 res->name = pci_name(dev);
632 res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK;
633 res->flags |=
634 (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN);
635 region &= ~(size - 1);
636
637 /* Convert from PCI bus to resource space */
638 bus_region.start = region;
639 bus_region.end = region + size - 1;
640 pcibios_bus_to_resource(dev->bus, res, &bus_region);
641
642 pci_info(dev, FW_BUG "%s %pR: %s quirk\n", res_name, res, name);
643}
644
645/*
646 * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
647 * ver. 1.33 20070103) don't set the correct ISA PCI region header info.
648 * BAR0 should be 8 bytes; instead, it may be set to something like 8k
649 * (which conflicts w/ BAR1's memory range).
650 *
651 * CS553x's ISA PCI BARs may also be read-only (ref:
652 * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward).
653 */
654static void quirk_cs5536_vsa(struct pci_dev *dev)
655{
656 static char *name = "CS5536 ISA bridge";
657
658 if (pci_resource_len(dev, 0) != 8) {
659 quirk_io(dev, 0, 8, name); /* SMB */
660 quirk_io(dev, 1, 256, name); /* GPIO */
661 quirk_io(dev, 2, 64, name); /* MFGPT */
662 pci_info(dev, "%s bug detected (incorrect header); workaround applied\n",
663 name);
664 }
665}
666DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
667
668static void quirk_io_region(struct pci_dev *dev, int port,
669 unsigned int size, int nr, const char *name)
670{
671 u16 region;
672 struct pci_bus_region bus_region;
673 struct resource *res = dev->resource + nr;
674
675 pci_read_config_word(dev, port, ®ion);
676 region &= ~(size - 1);
677
678 if (!region)
679 return;
680
681 res->name = pci_name(dev);
682 res->flags = IORESOURCE_IO;
683
684 /* Convert from PCI bus to resource space */
685 bus_region.start = region;
686 bus_region.end = region + size - 1;
687 pcibios_bus_to_resource(dev->bus, res, &bus_region);
688
689 /*
690 * "res" is typically a bridge window resource that's not being
691 * used for a bridge window, so it's just a place to stash this
692 * non-standard resource. Printing "nr" or pci_resource_name() of
693 * it doesn't really make sense.
694 */
695 if (!pci_claim_resource(dev, nr))
696 pci_info(dev, "quirk: %pR claimed by %s\n", res, name);
697}
698
699/*
700 * ATI Northbridge setups MCE the processor if you even read somewhere
701 * between 0x3b0->0x3bb or read 0x3d3
702 */
703static void quirk_ati_exploding_mce(struct pci_dev *dev)
704{
705 pci_info(dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n");
706 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
707 request_region(0x3b0, 0x0C, "RadeonIGP");
708 request_region(0x3d3, 0x01, "RadeonIGP");
709}
710DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce);
711
712/*
713 * In the AMD NL platform, this device ([1022:7912]) has a class code of
714 * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will
715 * claim it. The same applies on the VanGogh platform device ([1022:163a]).
716 *
717 * But the dwc3 driver is a more specific driver for this device, and we'd
718 * prefer to use it instead of xhci. To prevent xhci from claiming the
719 * device, change the class code to 0x0c03fe, which the PCI r3.0 spec
720 * defines as "USB device (not host controller)". The dwc3 driver can then
721 * claim it based on its Vendor and Device ID.
722 */
723static void quirk_amd_dwc_class(struct pci_dev *pdev)
724{
725 u32 class = pdev->class;
726
727 if (class != PCI_CLASS_SERIAL_USB_DEVICE) {
728 /* Use "USB Device (not host controller)" class */
729 pdev->class = PCI_CLASS_SERIAL_USB_DEVICE;
730 pci_info(pdev,
731 "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n",
732 class, pdev->class);
733 }
734}
735DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB,
736 quirk_amd_dwc_class);
737DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VANGOGH_USB,
738 quirk_amd_dwc_class);
739
740/*
741 * Synopsys USB 3.x host HAPS platform has a class code of
742 * PCI_CLASS_SERIAL_USB_XHCI, and xhci driver can claim it. However, these
743 * devices should use dwc3-haps driver. Change these devices' class code to
744 * PCI_CLASS_SERIAL_USB_DEVICE to prevent the xhci-pci driver from claiming
745 * them.
746 */
747static void quirk_synopsys_haps(struct pci_dev *pdev)
748{
749 u32 class = pdev->class;
750
751 switch (pdev->device) {
752 case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3:
753 case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI:
754 case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31:
755 pdev->class = PCI_CLASS_SERIAL_USB_DEVICE;
756 pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n",
757 class, pdev->class);
758 break;
759 }
760}
761DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, PCI_ANY_ID,
762 PCI_CLASS_SERIAL_USB_XHCI, 0,
763 quirk_synopsys_haps);
764
765/*
766 * Let's make the southbridge information explicit instead of having to
767 * worry about people probing the ACPI areas, for example.. (Yes, it
768 * happens, and if you read the wrong ACPI register it will put the machine
769 * to sleep with no way of waking it up again. Bummer).
770 *
771 * ALI M7101: Two IO regions pointed to by words at
772 * 0xE0 (64 bytes of ACPI registers)
773 * 0xE2 (32 bytes of SMB registers)
774 */
775static void quirk_ali7101_acpi(struct pci_dev *dev)
776{
777 quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
778 quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
779}
780DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi);
781
782static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
783{
784 u32 devres;
785 u32 mask, size, base;
786
787 pci_read_config_dword(dev, port, &devres);
788 if ((devres & enable) != enable)
789 return;
790 mask = (devres >> 16) & 15;
791 base = devres & 0xffff;
792 size = 16;
793 for (;;) {
794 unsigned int bit = size >> 1;
795 if ((bit & mask) == bit)
796 break;
797 size = bit;
798 }
799 /*
800 * For now we only print it out. Eventually we'll want to
801 * reserve it (at least if it's in the 0x1000+ range), but
802 * let's get enough confirmation reports first.
803 */
804 base &= -size;
805 pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1);
806}
807
808static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
809{
810 u32 devres;
811 u32 mask, size, base;
812
813 pci_read_config_dword(dev, port, &devres);
814 if ((devres & enable) != enable)
815 return;
816 base = devres & 0xffff0000;
817 mask = (devres & 0x3f) << 16;
818 size = 128 << 16;
819 for (;;) {
820 unsigned int bit = size >> 1;
821 if ((bit & mask) == bit)
822 break;
823 size = bit;
824 }
825
826 /*
827 * For now we only print it out. Eventually we'll want to
828 * reserve it, but let's get enough confirmation reports first.
829 */
830 base &= -size;
831 pci_info(dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1);
832}
833
834/*
835 * PIIX4 ACPI: Two IO regions pointed to by longwords at
836 * 0x40 (64 bytes of ACPI registers)
837 * 0x90 (16 bytes of SMB registers)
838 * and a few strange programmable PIIX4 device resources.
839 */
840static void quirk_piix4_acpi(struct pci_dev *dev)
841{
842 u32 res_a;
843
844 quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
845 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
846
847 /* Device resource A has enables for some of the other ones */
848 pci_read_config_dword(dev, 0x5c, &res_a);
849
850 piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
851 piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
852
853 /* Device resource D is just bitfields for static resources */
854
855 /* Device 12 enabled? */
856 if (res_a & (1 << 29)) {
857 piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
858 piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
859 }
860 /* Device 13 enabled? */
861 if (res_a & (1 << 30)) {
862 piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
863 piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
864 }
865 piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
866 piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
867}
868DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi);
869DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi);
870
871#define ICH_PMBASE 0x40
872#define ICH_ACPI_CNTL 0x44
873#define ICH4_ACPI_EN 0x10
874#define ICH6_ACPI_EN 0x80
875#define ICH4_GPIOBASE 0x58
876#define ICH4_GPIO_CNTL 0x5c
877#define ICH4_GPIO_EN 0x10
878#define ICH6_GPIOBASE 0x48
879#define ICH6_GPIO_CNTL 0x4c
880#define ICH6_GPIO_EN 0x10
881
882/*
883 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
884 * 0x40 (128 bytes of ACPI, GPIO & TCO registers)
885 * 0x58 (64 bytes of GPIO I/O space)
886 */
887static void quirk_ich4_lpc_acpi(struct pci_dev *dev)
888{
889 u8 enable;
890
891 /*
892 * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict
893 * with low legacy (and fixed) ports. We don't know the decoding
894 * priority and can't tell whether the legacy device or the one created
895 * here is really at that address. This happens on boards with broken
896 * BIOSes.
897 */
898 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
899 if (enable & ICH4_ACPI_EN)
900 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES,
901 "ICH4 ACPI/GPIO/TCO");
902
903 pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable);
904 if (enable & ICH4_GPIO_EN)
905 quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1,
906 "ICH4 GPIO");
907}
908DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi);
909DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi);
910DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi);
911DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi);
912DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi);
913DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi);
914DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi);
915DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi);
916DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi);
917DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi);
918
919static void ich6_lpc_acpi_gpio(struct pci_dev *dev)
920{
921 u8 enable;
922
923 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
924 if (enable & ICH6_ACPI_EN)
925 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES,
926 "ICH6 ACPI/GPIO/TCO");
927
928 pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
929 if (enable & ICH6_GPIO_EN)
930 quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1,
931 "ICH6 GPIO");
932}
933
934static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned int reg,
935 const char *name, int dynsize)
936{
937 u32 val;
938 u32 size, base;
939
940 pci_read_config_dword(dev, reg, &val);
941
942 /* Enabled? */
943 if (!(val & 1))
944 return;
945 base = val & 0xfffc;
946 if (dynsize) {
947 /*
948 * This is not correct. It is 16, 32 or 64 bytes depending on
949 * register D31:F0:ADh bits 5:4.
950 *
951 * But this gets us at least _part_ of it.
952 */
953 size = 16;
954 } else {
955 size = 128;
956 }
957 base &= ~(size-1);
958
959 /*
960 * Just print it out for now. We should reserve it after more
961 * debugging.
962 */
963 pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base+size-1);
964}
965
966static void quirk_ich6_lpc(struct pci_dev *dev)
967{
968 /* Shared ACPI/GPIO decode with all ICH6+ */
969 ich6_lpc_acpi_gpio(dev);
970
971 /* ICH6-specific generic IO decode */
972 ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0);
973 ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1);
974}
975DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc);
976DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc);
977
978static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned int reg,
979 const char *name)
980{
981 u32 val;
982 u32 mask, base;
983
984 pci_read_config_dword(dev, reg, &val);
985
986 /* Enabled? */
987 if (!(val & 1))
988 return;
989
990 /* IO base in bits 15:2, mask in bits 23:18, both are dword-based */
991 base = val & 0xfffc;
992 mask = (val >> 16) & 0xfc;
993 mask |= 3;
994
995 /*
996 * Just print it out for now. We should reserve it after more
997 * debugging.
998 */
999 pci_info(dev, "%s PIO at %04x (mask %04x)\n", name, base, mask);
1000}
1001
1002/* ICH7-10 has the same common LPC generic IO decode registers */
1003static void quirk_ich7_lpc(struct pci_dev *dev)
1004{
1005 /* We share the common ACPI/GPIO decode with ICH6 */
1006 ich6_lpc_acpi_gpio(dev);
1007
1008 /* And have 4 ICH7+ generic decodes */
1009 ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1");
1010 ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2");
1011 ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3");
1012 ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4");
1013}
1014DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc);
1015DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc);
1016DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc);
1017DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc);
1018DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc);
1019DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc);
1020DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc);
1021DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc);
1022DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc);
1023DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc);
1024DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc);
1025DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc);
1026DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc);
1027
1028/*
1029 * VIA ACPI: One IO region pointed to by longword at
1030 * 0x48 or 0x20 (256 bytes of ACPI registers)
1031 */
1032static void quirk_vt82c586_acpi(struct pci_dev *dev)
1033{
1034 if (dev->revision & 0x10)
1035 quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES,
1036 "vt82c586 ACPI");
1037}
1038DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi);
1039
1040/*
1041 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at
1042 * 0x48 (256 bytes of ACPI registers)
1043 * 0x70 (128 bytes of hardware monitoring register)
1044 * 0x90 (16 bytes of SMB registers)
1045 */
1046static void quirk_vt82c686_acpi(struct pci_dev *dev)
1047{
1048 quirk_vt82c586_acpi(dev);
1049
1050 quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1,
1051 "vt82c686 HW-mon");
1052
1053 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB");
1054}
1055DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi);
1056
1057/*
1058 * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
1059 * 0x88 (128 bytes of power management registers)
1060 * 0xd0 (16 bytes of SMB registers)
1061 */
1062static void quirk_vt8235_acpi(struct pci_dev *dev)
1063{
1064 quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
1065 quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB");
1066}
1067DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
1068
1069/*
1070 * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast
1071 * back-to-back: Disable fast back-to-back on the secondary bus segment
1072 */
1073static void quirk_xio2000a(struct pci_dev *dev)
1074{
1075 struct pci_dev *pdev;
1076 u16 command;
1077
1078 pci_warn(dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n");
1079 list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
1080 pci_read_config_word(pdev, PCI_COMMAND, &command);
1081 if (command & PCI_COMMAND_FAST_BACK)
1082 pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
1083 }
1084}
1085DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
1086 quirk_xio2000a);
1087
1088#ifdef CONFIG_X86_IO_APIC
1089
1090#include <asm/io_apic.h>
1091
1092/*
1093 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip
1094 * devices to the external APIC.
1095 *
1096 * TODO: When we have device-specific interrupt routers, this code will go
1097 * away from quirks.
1098 */
1099static void quirk_via_ioapic(struct pci_dev *dev)
1100{
1101 u8 tmp;
1102
1103 if (nr_ioapics < 1)
1104 tmp = 0; /* nothing routed to external APIC */
1105 else
1106 tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
1107
1108 pci_info(dev, "%s VIA external APIC routing\n",
1109 tmp ? "Enabling" : "Disabling");
1110
1111 /* Offset 0x58: External APIC IRQ output control */
1112 pci_write_config_byte(dev, 0x58, tmp);
1113}
1114DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
1115DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
1116
1117/*
1118 * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit.
1119 * This leads to doubled level interrupt rates.
1120 * Set this bit to get rid of cycle wastage.
1121 * Otherwise uncritical.
1122 */
1123static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
1124{
1125 u8 misc_control2;
1126#define BYPASS_APIC_DEASSERT 8
1127
1128 pci_read_config_byte(dev, 0x5B, &misc_control2);
1129 if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
1130 pci_info(dev, "Bypassing VIA 8237 APIC De-Assert Message\n");
1131 pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
1132 }
1133}
1134DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
1135DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
1136
1137/*
1138 * The AMD IO-APIC can hang the box when an APIC IRQ is masked.
1139 * We check all revs >= B0 (yet not in the pre production!) as the bug
1140 * is currently marked NoFix
1141 *
1142 * We have multiple reports of hangs with this chipset that went away with
1143 * noapic specified. For the moment we assume it's the erratum. We may be wrong
1144 * of course. However the advice is demonstrably good even if so.
1145 */
1146static void quirk_amd_ioapic(struct pci_dev *dev)
1147{
1148 if (dev->revision >= 0x02) {
1149 pci_warn(dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
1150 pci_warn(dev, " : booting with the \"noapic\" option\n");
1151 }
1152}
1153DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
1154#endif /* CONFIG_X86_IO_APIC */
1155
1156#if defined(CONFIG_ARM64) && defined(CONFIG_PCI_ATS)
1157
1158static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev)
1159{
1160 /* Fix for improper SR-IOV configuration on Cavium cn88xx RNM device */
1161 if (dev->subsystem_device == 0xa118)
1162 dev->sriov->link = dev->devfn;
1163}
1164DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CAVIUM, 0xa018, quirk_cavium_sriov_rnm_link);
1165#endif
1166
1167/*
1168 * Some settings of MMRBC can lead to data corruption so block changes.
1169 * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
1170 */
1171static void quirk_amd_8131_mmrbc(struct pci_dev *dev)
1172{
1173 if (dev->subordinate && dev->revision <= 0x12) {
1174 pci_info(dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n",
1175 dev->revision);
1176 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
1177 }
1178}
1179DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
1180
1181/*
1182 * FIXME: it is questionable that quirk_via_acpi() is needed. It shows up
1183 * as an ISA bridge, and does not support the PCI_INTERRUPT_LINE register
1184 * at all. Therefore it seems like setting the pci_dev's IRQ to the value
1185 * of the ACPI SCI interrupt is only done for convenience.
1186 * -jgarzik
1187 */
1188static void quirk_via_acpi(struct pci_dev *d)
1189{
1190 u8 irq;
1191
1192 /* VIA ACPI device: SCI IRQ line in PCI config byte 0x42 */
1193 pci_read_config_byte(d, 0x42, &irq);
1194 irq &= 0xf;
1195 if (irq && (irq != 2))
1196 d->irq = irq;
1197}
1198DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi);
1199DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi);
1200
1201/* VIA bridges which have VLink */
1202static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18;
1203
1204static void quirk_via_bridge(struct pci_dev *dev)
1205{
1206 /* See what bridge we have and find the device ranges */
1207 switch (dev->device) {
1208 case PCI_DEVICE_ID_VIA_82C686:
1209 /*
1210 * The VT82C686 is special; it attaches to PCI and can have
1211 * any device number. All its subdevices are functions of
1212 * that single device.
1213 */
1214 via_vlink_dev_lo = PCI_SLOT(dev->devfn);
1215 via_vlink_dev_hi = PCI_SLOT(dev->devfn);
1216 break;
1217 case PCI_DEVICE_ID_VIA_8237:
1218 case PCI_DEVICE_ID_VIA_8237A:
1219 via_vlink_dev_lo = 15;
1220 break;
1221 case PCI_DEVICE_ID_VIA_8235:
1222 via_vlink_dev_lo = 16;
1223 break;
1224 case PCI_DEVICE_ID_VIA_8231:
1225 case PCI_DEVICE_ID_VIA_8233_0:
1226 case PCI_DEVICE_ID_VIA_8233A:
1227 case PCI_DEVICE_ID_VIA_8233C_0:
1228 via_vlink_dev_lo = 17;
1229 break;
1230 }
1231}
1232DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge);
1233DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge);
1234DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge);
1235DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge);
1236DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge);
1237DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge);
1238DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge);
1239DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge);
1240
1241/*
1242 * quirk_via_vlink - VIA VLink IRQ number update
1243 * @dev: PCI device
1244 *
1245 * If the device we are dealing with is on a PIC IRQ we need to ensure that
1246 * the IRQ line register which usually is not relevant for PCI cards, is
1247 * actually written so that interrupts get sent to the right place.
1248 *
1249 * We only do this on systems where a VIA south bridge was detected, and
1250 * only for VIA devices on the motherboard (see quirk_via_bridge above).
1251 */
1252static void quirk_via_vlink(struct pci_dev *dev)
1253{
1254 u8 irq, new_irq;
1255
1256 /* Check if we have VLink at all */
1257 if (via_vlink_dev_lo == -1)
1258 return;
1259
1260 new_irq = dev->irq;
1261
1262 /* Don't quirk interrupts outside the legacy IRQ range */
1263 if (!new_irq || new_irq > 15)
1264 return;
1265
1266 /* Internal device ? */
1267 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi ||
1268 PCI_SLOT(dev->devfn) < via_vlink_dev_lo)
1269 return;
1270
1271 /*
1272 * This is an internal VLink device on a PIC interrupt. The BIOS
1273 * ought to have set this but may not have, so we redo it.
1274 */
1275 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
1276 if (new_irq != irq) {
1277 pci_info(dev, "VIA VLink IRQ fixup, from %d to %d\n",
1278 irq, new_irq);
1279 udelay(15); /* unknown if delay really needed */
1280 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
1281 }
1282}
1283DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
1284
1285/*
1286 * VIA VT82C598 has its device ID settable and many BIOSes set it to the ID
1287 * of VT82C597 for backward compatibility. We need to switch it off to be
1288 * able to recognize the real type of the chip.
1289 */
1290static void quirk_vt82c598_id(struct pci_dev *dev)
1291{
1292 pci_write_config_byte(dev, 0xfc, 0);
1293 pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device);
1294}
1295DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id);
1296
1297/*
1298 * CardBus controllers have a legacy base address that enables them to
1299 * respond as i82365 pcmcia controllers. We don't want them to do this
1300 * even if the Linux CardBus driver is not loaded, because the Linux i82365
1301 * driver does not (and should not) handle CardBus.
1302 */
1303static void quirk_cardbus_legacy(struct pci_dev *dev)
1304{
1305 pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
1306}
1307DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
1308 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
1309DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID,
1310 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
1311
1312/*
1313 * Following the PCI ordering rules is optional on the AMD762. I'm not sure
1314 * what the designers were smoking but let's not inhale...
1315 *
1316 * To be fair to AMD, it follows the spec by default, it's BIOS people who
1317 * turn it off!
1318 */
1319static void quirk_amd_ordering(struct pci_dev *dev)
1320{
1321 u32 pcic;
1322 pci_read_config_dword(dev, 0x4C, &pcic);
1323 if ((pcic & 6) != 6) {
1324 pcic |= 6;
1325 pci_warn(dev, "BIOS failed to enable PCI standards compliance; fixing this error\n");
1326 pci_write_config_dword(dev, 0x4C, pcic);
1327 pci_read_config_dword(dev, 0x84, &pcic);
1328 pcic |= (1 << 23); /* Required in this mode */
1329 pci_write_config_dword(dev, 0x84, pcic);
1330 }
1331}
1332DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
1333DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
1334
1335/*
1336 * DreamWorks-provided workaround for Dunord I-3000 problem
1337 *
1338 * This card decodes and responds to addresses not apparently assigned to
1339 * it. We force a larger allocation to ensure that nothing gets put too
1340 * close to it.
1341 */
1342static void quirk_dunord(struct pci_dev *dev)
1343{
1344 struct resource *r = &dev->resource[1];
1345
1346 r->flags |= IORESOURCE_UNSET;
1347 resource_set_range(r, 0, SZ_16M);
1348}
1349DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord);
1350
1351/*
1352 * i82380FB mobile docking controller: its PCI-to-PCI bridge is subtractive
1353 * decoding (transparent), and does indicate this in the ProgIf.
1354 * Unfortunately, the ProgIf value is wrong - 0x80 instead of 0x01.
1355 */
1356static void quirk_transparent_bridge(struct pci_dev *dev)
1357{
1358 dev->transparent = 1;
1359}
1360DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge);
1361DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge);
1362
1363/*
1364 * Common misconfiguration of the MediaGX/Geode PCI master that will reduce
1365 * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets
1366 * found at http://www.national.com/analog for info on what these bits do.
1367 * <christer@weinigel.se>
1368 */
1369static void quirk_mediagx_master(struct pci_dev *dev)
1370{
1371 u8 reg;
1372
1373 pci_read_config_byte(dev, 0x41, ®);
1374 if (reg & 2) {
1375 reg &= ~2;
1376 pci_info(dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n",
1377 reg);
1378 pci_write_config_byte(dev, 0x41, reg);
1379 }
1380}
1381DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
1382DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
1383
1384/*
1385 * Ensure C0 rev restreaming is off. This is normally done by the BIOS but
1386 * in the odd case it is not the results are corruption hence the presence
1387 * of a Linux check.
1388 */
1389static void quirk_disable_pxb(struct pci_dev *pdev)
1390{
1391 u16 config;
1392
1393 if (pdev->revision != 0x04) /* Only C0 requires this */
1394 return;
1395 pci_read_config_word(pdev, 0x40, &config);
1396 if (config & (1<<6)) {
1397 config &= ~(1<<6);
1398 pci_write_config_word(pdev, 0x40, config);
1399 pci_info(pdev, "C0 revision 450NX. Disabling PCI restreaming\n");
1400 }
1401}
1402DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
1403DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
1404
1405static void quirk_amd_ide_mode(struct pci_dev *pdev)
1406{
1407 /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
1408 u8 tmp;
1409
1410 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
1411 if (tmp == 0x01) {
1412 pci_read_config_byte(pdev, 0x40, &tmp);
1413 pci_write_config_byte(pdev, 0x40, tmp|1);
1414 pci_write_config_byte(pdev, 0x9, 1);
1415 pci_write_config_byte(pdev, 0xa, 6);
1416 pci_write_config_byte(pdev, 0x40, tmp);
1417
1418 pdev->class = PCI_CLASS_STORAGE_SATA_AHCI;
1419 pci_info(pdev, "set SATA to AHCI mode\n");
1420 }
1421}
1422DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
1423DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
1424DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
1425DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
1426DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
1427DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
1428DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
1429DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
1430
1431/* Serverworks CSB5 IDE does not fully support native mode */
1432static void quirk_svwks_csb5ide(struct pci_dev *pdev)
1433{
1434 u8 prog;
1435 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
1436 if (prog & 5) {
1437 prog &= ~5;
1438 pdev->class &= ~5;
1439 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
1440 /* PCI layer will sort out resources */
1441 }
1442}
1443DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide);
1444
1445/* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */
1446static void quirk_ide_samemode(struct pci_dev *pdev)
1447{
1448 u8 prog;
1449
1450 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
1451
1452 if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) {
1453 pci_info(pdev, "IDE mode mismatch; forcing legacy mode\n");
1454 prog &= ~5;
1455 pdev->class &= ~5;
1456 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
1457 }
1458}
1459DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
1460
1461/* Some ATA devices break if put into D3 */
1462static void quirk_no_ata_d3(struct pci_dev *pdev)
1463{
1464 pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
1465}
1466/* Quirk the legacy ATA devices only. The AHCI ones are ok */
1467DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID,
1468 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
1469DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
1470 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
1471/* ALi loses some register settings that we cannot then restore */
1472DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID,
1473 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
1474/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
1475 occur when mode detecting */
1476DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
1477 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
1478
1479/*
1480 * This was originally an Alpha-specific thing, but it really fits here.
1481 * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
1482 */
1483static void quirk_eisa_bridge(struct pci_dev *dev)
1484{
1485 dev->class = PCI_CLASS_BRIDGE_EISA << 8;
1486}
1487DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge);
1488
1489/*
1490 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
1491 * is not activated. The myth is that Asus said that they do not want the
1492 * users to be irritated by just another PCI Device in the Win98 device
1493 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
1494 * package 2.7.0 for details)
1495 *
1496 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
1497 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
1498 * becomes necessary to do this tweak in two steps -- the chosen trigger
1499 * is either the Host bridge (preferred) or on-board VGA controller.
1500 *
1501 * Note that we used to unhide the SMBus that way on Toshiba laptops
1502 * (Satellite A40 and Tecra M2) but then found that the thermal management
1503 * was done by SMM code, which could cause unsynchronized concurrent
1504 * accesses to the SMBus registers, with potentially bad effects. Thus you
1505 * should be very careful when adding new entries: if SMM is accessing the
1506 * Intel SMBus, this is a very good reason to leave it hidden.
1507 *
1508 * Likewise, many recent laptops use ACPI for thermal management. If the
1509 * ACPI DSDT code accesses the SMBus, then Linux should not access it
1510 * natively, and keeping the SMBus hidden is the right thing to do. If you
1511 * are about to add an entry in the table below, please first disassemble
1512 * the DSDT and double-check that there is no code accessing the SMBus.
1513 */
1514static int asus_hides_smbus;
1515
1516static void asus_hides_smbus_hostbridge(struct pci_dev *dev)
1517{
1518 if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
1519 if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
1520 switch (dev->subsystem_device) {
1521 case 0x8025: /* P4B-LX */
1522 case 0x8070: /* P4B */
1523 case 0x8088: /* P4B533 */
1524 case 0x1626: /* L3C notebook */
1525 asus_hides_smbus = 1;
1526 }
1527 else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
1528 switch (dev->subsystem_device) {
1529 case 0x80b1: /* P4GE-V */
1530 case 0x80b2: /* P4PE */
1531 case 0x8093: /* P4B533-V */
1532 asus_hides_smbus = 1;
1533 }
1534 else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
1535 switch (dev->subsystem_device) {
1536 case 0x8030: /* P4T533 */
1537 asus_hides_smbus = 1;
1538 }
1539 else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
1540 switch (dev->subsystem_device) {
1541 case 0x8070: /* P4G8X Deluxe */
1542 asus_hides_smbus = 1;
1543 }
1544 else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH)
1545 switch (dev->subsystem_device) {
1546 case 0x80c9: /* PU-DLS */
1547 asus_hides_smbus = 1;
1548 }
1549 else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
1550 switch (dev->subsystem_device) {
1551 case 0x1751: /* M2N notebook */
1552 case 0x1821: /* M5N notebook */
1553 case 0x1897: /* A6L notebook */
1554 asus_hides_smbus = 1;
1555 }
1556 else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1557 switch (dev->subsystem_device) {
1558 case 0x184b: /* W1N notebook */
1559 case 0x186a: /* M6Ne notebook */
1560 asus_hides_smbus = 1;
1561 }
1562 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
1563 switch (dev->subsystem_device) {
1564 case 0x80f2: /* P4P800-X */
1565 asus_hides_smbus = 1;
1566 }
1567 else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
1568 switch (dev->subsystem_device) {
1569 case 0x1882: /* M6V notebook */
1570 case 0x1977: /* A6VA notebook */
1571 asus_hides_smbus = 1;
1572 }
1573 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
1574 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1575 switch (dev->subsystem_device) {
1576 case 0x088C: /* HP Compaq nc8000 */
1577 case 0x0890: /* HP Compaq nc6000 */
1578 asus_hides_smbus = 1;
1579 }
1580 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
1581 switch (dev->subsystem_device) {
1582 case 0x12bc: /* HP D330L */
1583 case 0x12bd: /* HP D530 */
1584 case 0x006a: /* HP Compaq nx9500 */
1585 asus_hides_smbus = 1;
1586 }
1587 else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
1588 switch (dev->subsystem_device) {
1589 case 0x12bf: /* HP xw4100 */
1590 asus_hides_smbus = 1;
1591 }
1592 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
1593 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1594 switch (dev->subsystem_device) {
1595 case 0xC00C: /* Samsung P35 notebook */
1596 asus_hides_smbus = 1;
1597 }
1598 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
1599 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
1600 switch (dev->subsystem_device) {
1601 case 0x0058: /* Compaq Evo N620c */
1602 asus_hides_smbus = 1;
1603 }
1604 else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3)
1605 switch (dev->subsystem_device) {
1606 case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */
1607 /* Motherboard doesn't have Host bridge
1608 * subvendor/subdevice IDs, therefore checking
1609 * its on-board VGA controller */
1610 asus_hides_smbus = 1;
1611 }
1612 else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2)
1613 switch (dev->subsystem_device) {
1614 case 0x00b8: /* Compaq Evo D510 CMT */
1615 case 0x00b9: /* Compaq Evo D510 SFF */
1616 case 0x00ba: /* Compaq Evo D510 USDT */
1617 /* Motherboard doesn't have Host bridge
1618 * subvendor/subdevice IDs and on-board VGA
1619 * controller is disabled if an AGP card is
1620 * inserted, therefore checking USB UHCI
1621 * Controller #1 */
1622 asus_hides_smbus = 1;
1623 }
1624 else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC)
1625 switch (dev->subsystem_device) {
1626 case 0x001A: /* Compaq Deskpro EN SSF P667 815E */
1627 /* Motherboard doesn't have host bridge
1628 * subvendor/subdevice IDs, therefore checking
1629 * its on-board VGA controller */
1630 asus_hides_smbus = 1;
1631 }
1632 }
1633}
1634DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge);
1635DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge);
1636DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge);
1637DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge);
1638DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge);
1639DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge);
1640DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge);
1641DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge);
1642DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge);
1643DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge);
1644
1645DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge);
1646DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge);
1647DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge);
1648
1649static void asus_hides_smbus_lpc(struct pci_dev *dev)
1650{
1651 u16 val;
1652
1653 if (likely(!asus_hides_smbus))
1654 return;
1655
1656 pci_read_config_word(dev, 0xF2, &val);
1657 if (val & 0x8) {
1658 pci_write_config_word(dev, 0xF2, val & (~0x8));
1659 pci_read_config_word(dev, 0xF2, &val);
1660 if (val & 0x8)
1661 pci_info(dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n",
1662 val);
1663 else
1664 pci_info(dev, "Enabled i801 SMBus device\n");
1665 }
1666}
1667DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
1668DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
1669DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
1670DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
1671DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
1672DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
1673DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
1674DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
1675DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
1676DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
1677DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
1678DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
1679DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
1680DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
1681
1682/* It appears we just have one such device. If not, we have a warning */
1683static void __iomem *asus_rcba_base;
1684static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev)
1685{
1686 u32 rcba;
1687
1688 if (likely(!asus_hides_smbus))
1689 return;
1690 WARN_ON(asus_rcba_base);
1691
1692 pci_read_config_dword(dev, 0xF0, &rcba);
1693 /* use bits 31:14, 16 kB aligned */
1694 asus_rcba_base = ioremap(rcba & 0xFFFFC000, 0x4000);
1695 if (asus_rcba_base == NULL)
1696 return;
1697}
1698
1699static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev)
1700{
1701 u32 val;
1702
1703 if (likely(!asus_hides_smbus || !asus_rcba_base))
1704 return;
1705
1706 /* read the Function Disable register, dword mode only */
1707 val = readl(asus_rcba_base + 0x3418);
1708
1709 /* enable the SMBus device */
1710 writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418);
1711}
1712
1713static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev)
1714{
1715 if (likely(!asus_hides_smbus || !asus_rcba_base))
1716 return;
1717
1718 iounmap(asus_rcba_base);
1719 asus_rcba_base = NULL;
1720 pci_info(dev, "Enabled ICH6/i801 SMBus device\n");
1721}
1722
1723static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
1724{
1725 asus_hides_smbus_lpc_ich6_suspend(dev);
1726 asus_hides_smbus_lpc_ich6_resume_early(dev);
1727 asus_hides_smbus_lpc_ich6_resume(dev);
1728}
1729DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6);
1730DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend);
1731DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume);
1732DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early);
1733
1734/* SiS 96x south bridge: BIOS typically hides SMBus device... */
1735static void quirk_sis_96x_smbus(struct pci_dev *dev)
1736{
1737 u8 val = 0;
1738 pci_read_config_byte(dev, 0x77, &val);
1739 if (val & 0x10) {
1740 pci_info(dev, "Enabling SiS 96x SMBus\n");
1741 pci_write_config_byte(dev, 0x77, val & ~0x10);
1742 }
1743}
1744DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
1745DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
1746DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
1747DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
1748DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
1749DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
1750DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
1751DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
1752
1753/*
1754 * ... This is further complicated by the fact that some SiS96x south
1755 * bridges pretend to be 85C503/5513 instead. In that case see if we
1756 * spotted a compatible north bridge to make sure.
1757 * (pci_find_device() doesn't work yet)
1758 *
1759 * We can also enable the sis96x bit in the discovery register..
1760 */
1761#define SIS_DETECT_REGISTER 0x40
1762
1763static void quirk_sis_503(struct pci_dev *dev)
1764{
1765 u8 reg;
1766 u16 devid;
1767
1768 pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®);
1769 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6));
1770 pci_read_config_word(dev, PCI_DEVICE_ID, &devid);
1771 if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) {
1772 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg);
1773 return;
1774 }
1775
1776 /*
1777 * Ok, it now shows up as a 96x. Run the 96x quirk by hand in case
1778 * it has already been processed. (Depends on link order, which is
1779 * apparently not guaranteed)
1780 */
1781 dev->device = devid;
1782 quirk_sis_96x_smbus(dev);
1783}
1784DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
1785DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
1786
1787/*
1788 * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
1789 * and MC97 modem controller are disabled when a second PCI soundcard is
1790 * present. This patch, tweaking the VT8237 ISA bridge, enables them.
1791 * -- bjd
1792 */
1793static void asus_hides_ac97_lpc(struct pci_dev *dev)
1794{
1795 u8 val;
1796 int asus_hides_ac97 = 0;
1797
1798 if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
1799 if (dev->device == PCI_DEVICE_ID_VIA_8237)
1800 asus_hides_ac97 = 1;
1801 }
1802
1803 if (!asus_hides_ac97)
1804 return;
1805
1806 pci_read_config_byte(dev, 0x50, &val);
1807 if (val & 0xc0) {
1808 pci_write_config_byte(dev, 0x50, val & (~0xc0));
1809 pci_read_config_byte(dev, 0x50, &val);
1810 if (val & 0xc0)
1811 pci_info(dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n",
1812 val);
1813 else
1814 pci_info(dev, "Enabled onboard AC97/MC97 devices\n");
1815 }
1816}
1817DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
1818DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
1819
1820#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
1821
1822/*
1823 * If we are using libata we can drive this chip properly but must do this
1824 * early on to make the additional device appear during the PCI scanning.
1825 */
1826static void quirk_jmicron_ata(struct pci_dev *pdev)
1827{
1828 u32 conf1, conf5, class;
1829 u8 hdr;
1830
1831 /* Only poke fn 0 */
1832 if (PCI_FUNC(pdev->devfn))
1833 return;
1834
1835 pci_read_config_dword(pdev, 0x40, &conf1);
1836 pci_read_config_dword(pdev, 0x80, &conf5);
1837
1838 conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
1839 conf5 &= ~(1 << 24); /* Clear bit 24 */
1840
1841 switch (pdev->device) {
1842 case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
1843 case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
1844 case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */
1845 /* The controller should be in single function ahci mode */
1846 conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
1847 break;
1848
1849 case PCI_DEVICE_ID_JMICRON_JMB365:
1850 case PCI_DEVICE_ID_JMICRON_JMB366:
1851 /* Redirect IDE second PATA port to the right spot */
1852 conf5 |= (1 << 24);
1853 fallthrough;
1854 case PCI_DEVICE_ID_JMICRON_JMB361:
1855 case PCI_DEVICE_ID_JMICRON_JMB363:
1856 case PCI_DEVICE_ID_JMICRON_JMB369:
1857 /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
1858 /* Set the class codes correctly and then direct IDE 0 */
1859 conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
1860 break;
1861
1862 case PCI_DEVICE_ID_JMICRON_JMB368:
1863 /* The controller should be in single function IDE mode */
1864 conf1 |= 0x00C00000; /* Set 22, 23 */
1865 break;
1866 }
1867
1868 pci_write_config_dword(pdev, 0x40, conf1);
1869 pci_write_config_dword(pdev, 0x80, conf5);
1870
1871 /* Update pdev accordingly */
1872 pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
1873 pdev->hdr_type = hdr & PCI_HEADER_TYPE_MASK;
1874 pdev->multifunction = FIELD_GET(PCI_HEADER_TYPE_MFD, hdr);
1875
1876 pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class);
1877 pdev->class = class >> 8;
1878}
1879DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
1880DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
1881DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
1882DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
1883DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
1884DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
1885DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
1886DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
1887DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
1888DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
1889DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
1890DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
1891DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
1892DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
1893DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
1894DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
1895DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
1896DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
1897
1898#endif
1899
1900static void quirk_jmicron_async_suspend(struct pci_dev *dev)
1901{
1902 if (dev->multifunction) {
1903 device_disable_async_suspend(&dev->dev);
1904 pci_info(dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
1905 }
1906}
1907DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
1908DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
1909DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
1910DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
1911
1912#ifdef CONFIG_X86_IO_APIC
1913static void quirk_alder_ioapic(struct pci_dev *pdev)
1914{
1915 int i;
1916
1917 if ((pdev->class >> 8) != 0xff00)
1918 return;
1919
1920 /*
1921 * The first BAR is the location of the IO-APIC... we must
1922 * not touch this (and it's already covered by the fixmap), so
1923 * forcibly insert it into the resource tree.
1924 */
1925 if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0))
1926 insert_resource(&iomem_resource, &pdev->resource[0]);
1927
1928 /*
1929 * The next five BARs all seem to be rubbish, so just clean
1930 * them out.
1931 */
1932 for (i = 1; i < PCI_STD_NUM_BARS; i++)
1933 memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
1934}
1935DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic);
1936#endif
1937
1938static void quirk_no_msi(struct pci_dev *dev)
1939{
1940 pci_info(dev, "avoiding MSI to work around a hardware defect\n");
1941 dev->no_msi = 1;
1942}
1943DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4386, quirk_no_msi);
1944DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4387, quirk_no_msi);
1945DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4388, quirk_no_msi);
1946DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4389, quirk_no_msi);
1947DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438a, quirk_no_msi);
1948DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438b, quirk_no_msi);
1949
1950static void quirk_pcie_mch(struct pci_dev *pdev)
1951{
1952 pdev->no_msi = 1;
1953}
1954DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch);
1955DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch);
1956DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch);
1957
1958DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch);
1959
1960/*
1961 * HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
1962 * actually on the AMBA bus. These fake PCI devices can support SVA via
1963 * SMMU stall feature, by setting dma-can-stall for ACPI platforms.
1964 *
1965 * Normally stalling must not be enabled for PCI devices, since it would
1966 * break the PCI requirement for free-flowing writes and may lead to
1967 * deadlock. We expect PCI devices to support ATS and PRI if they want to
1968 * be fault-tolerant, so there's no ACPI binding to describe anything else,
1969 * even when a "PCI" device turns out to be a regular old SoC device
1970 * dressed up as a RCiEP and normal rules don't apply.
1971 */
1972static void quirk_huawei_pcie_sva(struct pci_dev *pdev)
1973{
1974 struct property_entry properties[] = {
1975 PROPERTY_ENTRY_BOOL("dma-can-stall"),
1976 {},
1977 };
1978
1979 if (pdev->revision != 0x21 && pdev->revision != 0x30)
1980 return;
1981
1982 pdev->pasid_no_tlp = 1;
1983
1984 /*
1985 * Set the dma-can-stall property on ACPI platforms. Device tree
1986 * can set it directly.
1987 */
1988 if (!pdev->dev.of_node &&
1989 device_create_managed_software_node(&pdev->dev, properties, NULL))
1990 pci_warn(pdev, "could not add stall property");
1991}
1992DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
1993DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva);
1994DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_sva);
1995DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
1996DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
1997DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
1998
1999/*
2000 * It's possible for the MSI to get corrupted if SHPC and ACPI are used
2001 * together on certain PXH-based systems.
2002 */
2003static void quirk_pcie_pxh(struct pci_dev *dev)
2004{
2005 dev->no_msi = 1;
2006 pci_warn(dev, "PXH quirk detected; SHPC device MSI disabled\n");
2007}
2008DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
2009DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
2010DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
2011DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
2012DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
2013
2014/*
2015 * Some Intel PCI Express chipsets have trouble with downstream device
2016 * power management.
2017 */
2018static void quirk_intel_pcie_pm(struct pci_dev *dev)
2019{
2020 pci_pm_d3hot_delay = 120;
2021 dev->no_d1d2 = 1;
2022}
2023DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm);
2024DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm);
2025DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm);
2026DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm);
2027DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm);
2028DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm);
2029DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm);
2030DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm);
2031DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm);
2032DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm);
2033DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm);
2034DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm);
2035DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm);
2036DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm);
2037DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm);
2038DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm);
2039DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm);
2040DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm);
2041DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
2042DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
2043DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
2044
2045static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay)
2046{
2047 if (dev->d3hot_delay >= delay)
2048 return;
2049
2050 dev->d3hot_delay = delay;
2051 pci_info(dev, "extending delay after power-on from D3hot to %d msec\n",
2052 dev->d3hot_delay);
2053}
2054
2055static void quirk_radeon_pm(struct pci_dev *dev)
2056{
2057 if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
2058 dev->subsystem_device == 0x00e2)
2059 quirk_d3hot_delay(dev, 20);
2060}
2061DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm);
2062
2063/*
2064 * NVIDIA Ampere-based HDA controllers can wedge the whole device if a bus
2065 * reset is performed too soon after transition to D0, extend d3hot_delay
2066 * to previous effective default for all NVIDIA HDA controllers.
2067 */
2068static void quirk_nvidia_hda_pm(struct pci_dev *dev)
2069{
2070 quirk_d3hot_delay(dev, 20);
2071}
2072DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
2073 PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8,
2074 quirk_nvidia_hda_pm);
2075
2076/*
2077 * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle.
2078 * https://bugzilla.kernel.org/show_bug.cgi?id=205587
2079 *
2080 * The kernel attempts to transition these devices to D3cold, but that seems
2081 * to be ineffective on the platforms in question; the PCI device appears to
2082 * remain on in D3hot state. The D3hot-to-D0 transition then requires an
2083 * extended delay in order to succeed.
2084 */
2085static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev)
2086{
2087 quirk_d3hot_delay(dev, 20);
2088}
2089DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot);
2090DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot);
2091DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1639, quirk_ryzen_xhci_d3hot);
2092
2093#ifdef CONFIG_X86_IO_APIC
2094static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
2095{
2096 noioapicreroute = 1;
2097 pr_info("%s detected: disable boot interrupt reroute\n", d->ident);
2098
2099 return 0;
2100}
2101
2102static const struct dmi_system_id boot_interrupt_dmi_table[] = {
2103 /*
2104 * Systems to exclude from boot interrupt reroute quirks
2105 */
2106 {
2107 .callback = dmi_disable_ioapicreroute,
2108 .ident = "ASUSTek Computer INC. M2N-LR",
2109 .matches = {
2110 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."),
2111 DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"),
2112 },
2113 },
2114 {}
2115};
2116
2117/*
2118 * Boot interrupts on some chipsets cannot be turned off. For these chipsets,
2119 * remap the original interrupt in the Linux kernel to the boot interrupt, so
2120 * that a PCI device's interrupt handler is installed on the boot interrupt
2121 * line instead.
2122 */
2123static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
2124{
2125 dmi_check_system(boot_interrupt_dmi_table);
2126 if (noioapicquirk || noioapicreroute)
2127 return;
2128
2129 dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT;
2130 pci_info(dev, "rerouting interrupts for [%04x:%04x]\n",
2131 dev->vendor, dev->device);
2132}
2133DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
2134DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
2135DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
2136DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
2137DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
2138DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
2139DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
2140DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
2141DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
2142DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
2143DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
2144DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
2145DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
2146DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
2147DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
2148DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
2149
2150/*
2151 * On some chipsets we can disable the generation of legacy INTx boot
2152 * interrupts.
2153 */
2154
2155/*
2156 * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no
2157 * 300641-004US, section 5.7.3.
2158 *
2159 * Core IO on Xeon E5 1600/2600/4600, see Intel order no 326509-003.
2160 * Core IO on Xeon E5 v2, see Intel order no 329188-003.
2161 * Core IO on Xeon E7 v2, see Intel order no 329595-002.
2162 * Core IO on Xeon E5 v3, see Intel order no 330784-003.
2163 * Core IO on Xeon E7 v3, see Intel order no 332315-001US.
2164 * Core IO on Xeon E5 v4, see Intel order no 333810-002US.
2165 * Core IO on Xeon E7 v4, see Intel order no 332315-001US.
2166 * Core IO on Xeon D-1500, see Intel order no 332051-001.
2167 * Core IO on Xeon Scalable, see Intel order no 610950.
2168 */
2169#define INTEL_6300_IOAPIC_ABAR 0x40 /* Bus 0, Dev 29, Func 5 */
2170#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14)
2171
2172#define INTEL_CIPINTRC_CFG_OFFSET 0x14C /* Bus 0, Dev 5, Func 0 */
2173#define INTEL_CIPINTRC_DIS_INTX_ICH (1<<25)
2174
2175static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
2176{
2177 u16 pci_config_word;
2178 u32 pci_config_dword;
2179
2180 if (noioapicquirk)
2181 return;
2182
2183 switch (dev->device) {
2184 case PCI_DEVICE_ID_INTEL_ESB_10:
2185 pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR,
2186 &pci_config_word);
2187 pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
2188 pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR,
2189 pci_config_word);
2190 break;
2191 case 0x3c28: /* Xeon E5 1600/2600/4600 */
2192 case 0x0e28: /* Xeon E5/E7 V2 */
2193 case 0x2f28: /* Xeon E5/E7 V3,V4 */
2194 case 0x6f28: /* Xeon D-1500 */
2195 case 0x2034: /* Xeon Scalable Family */
2196 pci_read_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
2197 &pci_config_dword);
2198 pci_config_dword |= INTEL_CIPINTRC_DIS_INTX_ICH;
2199 pci_write_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
2200 pci_config_dword);
2201 break;
2202 default:
2203 return;
2204 }
2205 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
2206 dev->vendor, dev->device);
2207}
2208/*
2209 * Device 29 Func 5 Device IDs of IO-APIC
2210 * containing ABAR—APIC1 Alternate Base Address Register
2211 */
2212DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10,
2213 quirk_disable_intel_boot_interrupt);
2214DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10,
2215 quirk_disable_intel_boot_interrupt);
2216
2217/*
2218 * Device 5 Func 0 Device IDs of Core IO modules/hubs
2219 * containing Coherent Interface Protocol Interrupt Control
2220 *
2221 * Device IDs obtained from volume 2 datasheets of commented
2222 * families above.
2223 */
2224DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x3c28,
2225 quirk_disable_intel_boot_interrupt);
2226DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0e28,
2227 quirk_disable_intel_boot_interrupt);
2228DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2f28,
2229 quirk_disable_intel_boot_interrupt);
2230DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x6f28,
2231 quirk_disable_intel_boot_interrupt);
2232DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2034,
2233 quirk_disable_intel_boot_interrupt);
2234DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x3c28,
2235 quirk_disable_intel_boot_interrupt);
2236DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x0e28,
2237 quirk_disable_intel_boot_interrupt);
2238DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2f28,
2239 quirk_disable_intel_boot_interrupt);
2240DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x6f28,
2241 quirk_disable_intel_boot_interrupt);
2242DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2034,
2243 quirk_disable_intel_boot_interrupt);
2244
2245/* Disable boot interrupts on HT-1000 */
2246#define BC_HT1000_FEATURE_REG 0x64
2247#define BC_HT1000_PIC_REGS_ENABLE (1<<0)
2248#define BC_HT1000_MAP_IDX 0xC00
2249#define BC_HT1000_MAP_DATA 0xC01
2250
2251static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev)
2252{
2253 u32 pci_config_dword;
2254 u8 irq;
2255
2256 if (noioapicquirk)
2257 return;
2258
2259 pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword);
2260 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword |
2261 BC_HT1000_PIC_REGS_ENABLE);
2262
2263 for (irq = 0x10; irq < 0x10 + 32; irq++) {
2264 outb(irq, BC_HT1000_MAP_IDX);
2265 outb(0x00, BC_HT1000_MAP_DATA);
2266 }
2267
2268 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword);
2269
2270 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
2271 dev->vendor, dev->device);
2272}
2273DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
2274DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
2275
2276/* Disable boot interrupts on AMD and ATI chipsets */
2277
2278/*
2279 * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131
2280 * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode
2281 * (due to an erratum).
2282 */
2283#define AMD_813X_MISC 0x40
2284#define AMD_813X_NOIOAMODE (1<<0)
2285#define AMD_813X_REV_B1 0x12
2286#define AMD_813X_REV_B2 0x13
2287
2288static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
2289{
2290 u32 pci_config_dword;
2291
2292 if (noioapicquirk)
2293 return;
2294 if ((dev->revision == AMD_813X_REV_B1) ||
2295 (dev->revision == AMD_813X_REV_B2))
2296 return;
2297
2298 pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
2299 pci_config_dword &= ~AMD_813X_NOIOAMODE;
2300 pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword);
2301
2302 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
2303 dev->vendor, dev->device);
2304}
2305DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
2306DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
2307DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
2308DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
2309
2310#define AMD_8111_PCI_IRQ_ROUTING 0x56
2311
2312static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev)
2313{
2314 u16 pci_config_word;
2315
2316 if (noioapicquirk)
2317 return;
2318
2319 pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word);
2320 if (!pci_config_word) {
2321 pci_info(dev, "boot interrupts on device [%04x:%04x] already disabled\n",
2322 dev->vendor, dev->device);
2323 return;
2324 }
2325 pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0);
2326 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
2327 dev->vendor, dev->device);
2328}
2329DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
2330DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
2331#endif /* CONFIG_X86_IO_APIC */
2332
2333/*
2334 * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
2335 * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
2336 * Re-allocate the region if needed...
2337 */
2338static void quirk_tc86c001_ide(struct pci_dev *dev)
2339{
2340 struct resource *r = &dev->resource[0];
2341
2342 if (r->start & 0x8) {
2343 r->flags |= IORESOURCE_UNSET;
2344 resource_set_range(r, 0, SZ_16);
2345 }
2346}
2347DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
2348 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
2349 quirk_tc86c001_ide);
2350
2351/*
2352 * PLX PCI 9050 PCI Target bridge controller has an erratum that prevents the
2353 * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o)
2354 * being read correctly if bit 7 of the base address is set.
2355 * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128).
2356 * Re-allocate the regions to a 256-byte boundary if necessary.
2357 */
2358static void quirk_plx_pci9050(struct pci_dev *dev)
2359{
2360 unsigned int bar;
2361
2362 /* Fixed in revision 2 (PCI 9052). */
2363 if (dev->revision >= 2)
2364 return;
2365 for (bar = 0; bar <= 1; bar++)
2366 if (pci_resource_len(dev, bar) == 0x80 &&
2367 (pci_resource_start(dev, bar) & 0x80)) {
2368 struct resource *r = &dev->resource[bar];
2369 pci_info(dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n",
2370 bar);
2371 r->flags |= IORESOURCE_UNSET;
2372 resource_set_range(r, 0, SZ_256);
2373 }
2374}
2375DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2376 quirk_plx_pci9050);
2377/*
2378 * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others)
2379 * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b,
2380 * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c,
2381 * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b.
2382 *
2383 * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq"
2384 * driver.
2385 */
2386DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050);
2387DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050);
2388
2389static void quirk_netmos(struct pci_dev *dev)
2390{
2391 unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
2392 unsigned int num_serial = dev->subsystem_device & 0xf;
2393
2394 /*
2395 * These Netmos parts are multiport serial devices with optional
2396 * parallel ports. Even when parallel ports are present, they
2397 * are identified as class SERIAL, which means the serial driver
2398 * will claim them. To prevent this, mark them as class OTHER.
2399 * These combo devices should be claimed by parport_serial.
2400 *
2401 * The subdevice ID is of the form 0x00PS, where <P> is the number
2402 * of parallel ports and <S> is the number of serial ports.
2403 */
2404 switch (dev->device) {
2405 case PCI_DEVICE_ID_NETMOS_9835:
2406 /* Well, this rule doesn't hold for the following 9835 device */
2407 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
2408 dev->subsystem_device == 0x0299)
2409 return;
2410 fallthrough;
2411 case PCI_DEVICE_ID_NETMOS_9735:
2412 case PCI_DEVICE_ID_NETMOS_9745:
2413 case PCI_DEVICE_ID_NETMOS_9845:
2414 case PCI_DEVICE_ID_NETMOS_9855:
2415 if (num_parallel) {
2416 pci_info(dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n",
2417 dev->device, num_parallel, num_serial);
2418 dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) |
2419 (dev->class & 0xff);
2420 }
2421 }
2422}
2423DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
2424 PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
2425
2426static void quirk_e100_interrupt(struct pci_dev *dev)
2427{
2428 u16 command, pmcsr;
2429 u8 __iomem *csr;
2430 u8 cmd_hi;
2431
2432 switch (dev->device) {
2433 /* PCI IDs taken from drivers/net/e100.c */
2434 case 0x1029:
2435 case 0x1030 ... 0x1034:
2436 case 0x1038 ... 0x103E:
2437 case 0x1050 ... 0x1057:
2438 case 0x1059:
2439 case 0x1064 ... 0x106B:
2440 case 0x1091 ... 0x1095:
2441 case 0x1209:
2442 case 0x1229:
2443 case 0x2449:
2444 case 0x2459:
2445 case 0x245D:
2446 case 0x27DC:
2447 break;
2448 default:
2449 return;
2450 }
2451
2452 /*
2453 * Some firmware hands off the e100 with interrupts enabled,
2454 * which can cause a flood of interrupts if packets are
2455 * received before the driver attaches to the device. So
2456 * disable all e100 interrupts here. The driver will
2457 * re-enable them when it's ready.
2458 */
2459 pci_read_config_word(dev, PCI_COMMAND, &command);
2460
2461 if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
2462 return;
2463
2464 /*
2465 * Check that the device is in the D0 power state. If it's not,
2466 * there is no point to look any further.
2467 */
2468 if (dev->pm_cap) {
2469 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
2470 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
2471 return;
2472 }
2473
2474 /* Convert from PCI bus to resource space. */
2475 csr = ioremap(pci_resource_start(dev, 0), 8);
2476 if (!csr) {
2477 pci_warn(dev, "Can't map e100 registers\n");
2478 return;
2479 }
2480
2481 cmd_hi = readb(csr + 3);
2482 if (cmd_hi == 0) {
2483 pci_warn(dev, "Firmware left e100 interrupts enabled; disabling\n");
2484 writeb(1, csr + 3);
2485 }
2486
2487 iounmap(csr);
2488}
2489DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
2490 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt);
2491
2492/*
2493 * The 82575 and 82598 may experience data corruption issues when transitioning
2494 * out of L0S. To prevent this we need to disable L0S on the PCIe link.
2495 */
2496static void quirk_disable_aspm_l0s(struct pci_dev *dev)
2497{
2498 pci_info(dev, "Disabling L0s\n");
2499 pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
2500}
2501DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
2502DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
2503DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
2504DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
2505DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
2506DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
2507DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
2508DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
2509DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
2510DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
2511DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
2512DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
2513DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
2514DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
2515
2516static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev)
2517{
2518 pci_info(dev, "Disabling ASPM L0s/L1\n");
2519 pci_disable_link_state(dev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
2520}
2521
2522/*
2523 * ASM1083/1085 PCIe-PCI bridge devices cause AER timeout errors on the
2524 * upstream PCIe root port when ASPM is enabled. At least L0s mode is affected;
2525 * disable both L0s and L1 for now to be safe.
2526 */
2527DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1);
2528
2529/*
2530 * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
2531 * Link bit cleared after starting the link retrain process to allow this
2532 * process to finish.
2533 *
2534 * Affected devices: PI7C9X110, PI7C9X111SL, PI7C9X130. See also the
2535 * Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf.
2536 */
2537static void quirk_enable_clear_retrain_link(struct pci_dev *dev)
2538{
2539 dev->clear_retrain_link = 1;
2540 pci_info(dev, "Enable PCIe Retrain Link quirk\n");
2541}
2542DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PERICOM, 0xe110, quirk_enable_clear_retrain_link);
2543DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PERICOM, 0xe111, quirk_enable_clear_retrain_link);
2544DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PERICOM, 0xe130, quirk_enable_clear_retrain_link);
2545
2546static void fixup_rev1_53c810(struct pci_dev *dev)
2547{
2548 u32 class = dev->class;
2549
2550 /*
2551 * rev 1 ncr53c810 chips don't set the class at all which means
2552 * they don't get their resources remapped. Fix that here.
2553 */
2554 if (class)
2555 return;
2556
2557 dev->class = PCI_CLASS_STORAGE_SCSI << 8;
2558 pci_info(dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n",
2559 class, dev->class);
2560}
2561DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
2562
2563/* Enable 1k I/O space granularity on the Intel P64H2 */
2564static void quirk_p64h2_1k_io(struct pci_dev *dev)
2565{
2566 u16 en1k;
2567
2568 pci_read_config_word(dev, 0x40, &en1k);
2569
2570 if (en1k & 0x200) {
2571 pci_info(dev, "Enable I/O Space to 1KB granularity\n");
2572 dev->io_window_1k = 1;
2573 }
2574}
2575DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
2576
2577/*
2578 * Under some circumstances, AER is not linked with extended capabilities.
2579 * Force it to be linked by setting the corresponding control bit in the
2580 * config space.
2581 */
2582static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
2583{
2584 uint8_t b;
2585
2586 if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
2587 if (!(b & 0x20)) {
2588 pci_write_config_byte(dev, 0xf41, b | 0x20);
2589 pci_info(dev, "Linking AER extended capability\n");
2590 }
2591 }
2592}
2593DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
2594 quirk_nvidia_ck804_pcie_aer_ext_cap);
2595DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
2596 quirk_nvidia_ck804_pcie_aer_ext_cap);
2597
2598static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
2599{
2600 /*
2601 * Disable PCI Bus Parking and PCI Master read caching on CX700
2602 * which causes unspecified timing errors with a VT6212L on the PCI
2603 * bus leading to USB2.0 packet loss.
2604 *
2605 * This quirk is only enabled if a second (on the external PCI bus)
2606 * VT6212L is found -- the CX700 core itself also contains a USB
2607 * host controller with the same PCI ID as the VT6212L.
2608 */
2609
2610 /* Count VT6212L instances */
2611 struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA,
2612 PCI_DEVICE_ID_VIA_8235_USB_2, NULL);
2613 uint8_t b;
2614
2615 /*
2616 * p should contain the first (internal) VT6212L -- see if we have
2617 * an external one by searching again.
2618 */
2619 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p);
2620 if (!p)
2621 return;
2622 pci_dev_put(p);
2623
2624 if (pci_read_config_byte(dev, 0x76, &b) == 0) {
2625 if (b & 0x40) {
2626 /* Turn off PCI Bus Parking */
2627 pci_write_config_byte(dev, 0x76, b ^ 0x40);
2628
2629 pci_info(dev, "Disabling VIA CX700 PCI parking\n");
2630 }
2631 }
2632
2633 if (pci_read_config_byte(dev, 0x72, &b) == 0) {
2634 if (b != 0) {
2635 /* Turn off PCI Master read caching */
2636 pci_write_config_byte(dev, 0x72, 0x0);
2637
2638 /* Set PCI Master Bus time-out to "1x16 PCLK" */
2639 pci_write_config_byte(dev, 0x75, 0x1);
2640
2641 /* Disable "Read FIFO Timer" */
2642 pci_write_config_byte(dev, 0x77, 0x0);
2643
2644 pci_info(dev, "Disabling VIA CX700 PCI caching\n");
2645 }
2646 }
2647}
2648DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
2649
2650static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
2651{
2652 u32 rev;
2653
2654 pci_read_config_dword(dev, 0xf4, &rev);
2655
2656 /* Only CAP the MRRS if the device is a 5719 A0 */
2657 if (rev == 0x05719000) {
2658 int readrq = pcie_get_readrq(dev);
2659 if (readrq > 2048)
2660 pcie_set_readrq(dev, 2048);
2661 }
2662}
2663DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
2664 PCI_DEVICE_ID_TIGON3_5719,
2665 quirk_brcm_5719_limit_mrrs);
2666
2667/*
2668 * Originally in EDAC sources for i82875P: Intel tells BIOS developers to
2669 * hide device 6 which configures the overflow device access containing the
2670 * DRBs - this is where we expose device 6.
2671 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
2672 */
2673static void quirk_unhide_mch_dev6(struct pci_dev *dev)
2674{
2675 u8 reg;
2676
2677 if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) {
2678 pci_info(dev, "Enabling MCH 'Overflow' Device\n");
2679 pci_write_config_byte(dev, 0xF4, reg | 0x02);
2680 }
2681}
2682DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
2683 quirk_unhide_mch_dev6);
2684DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
2685 quirk_unhide_mch_dev6);
2686
2687#ifdef CONFIG_PCI_MSI
2688/*
2689 * Some chipsets do not support MSI. We cannot easily rely on setting
2690 * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually some
2691 * other buses controlled by the chipset even if Linux is not aware of it.
2692 * Instead of setting the flag on all buses in the machine, simply disable
2693 * MSI globally.
2694 */
2695static void quirk_disable_all_msi(struct pci_dev *dev)
2696{
2697 pci_no_msi();
2698 pci_warn(dev, "MSI quirk detected; MSI disabled\n");
2699}
2700DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
2701DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
2702DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
2703DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
2704DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
2705DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
2706DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
2707DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi);
2708DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SAMSUNG, 0xa5e3, quirk_disable_all_msi);
2709
2710/* Disable MSI on chipsets that are known to not support it */
2711static void quirk_disable_msi(struct pci_dev *dev)
2712{
2713 if (dev->subordinate) {
2714 pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n");
2715 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
2716 }
2717}
2718DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
2719DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
2720DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi);
2721
2722/*
2723 * The APC bridge device in AMD 780 family northbridges has some random
2724 * OEM subsystem ID in its vendor ID register (erratum 18), so instead
2725 * we use the possible vendor/device IDs of the host bridge for the
2726 * declared quirk, and search for the APC bridge by slot number.
2727 */
2728static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
2729{
2730 struct pci_dev *apc_bridge;
2731
2732 apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0));
2733 if (apc_bridge) {
2734 if (apc_bridge->device == 0x9602)
2735 quirk_disable_msi(apc_bridge);
2736 pci_dev_put(apc_bridge);
2737 }
2738}
2739DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi);
2740DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi);
2741
2742/*
2743 * Go through the list of HyperTransport capabilities and return 1 if a HT
2744 * MSI capability is found and enabled.
2745 */
2746static int msi_ht_cap_enabled(struct pci_dev *dev)
2747{
2748 int pos, ttl = PCI_FIND_CAP_TTL;
2749
2750 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
2751 while (pos && ttl--) {
2752 u8 flags;
2753
2754 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
2755 &flags) == 0) {
2756 pci_info(dev, "Found %s HT MSI Mapping\n",
2757 flags & HT_MSI_FLAGS_ENABLE ?
2758 "enabled" : "disabled");
2759 return (flags & HT_MSI_FLAGS_ENABLE) != 0;
2760 }
2761
2762 pos = pci_find_next_ht_capability(dev, pos,
2763 HT_CAPTYPE_MSI_MAPPING);
2764 }
2765 return 0;
2766}
2767
2768/* Check the HyperTransport MSI mapping to know whether MSI is enabled or not */
2769static void quirk_msi_ht_cap(struct pci_dev *dev)
2770{
2771 if (!msi_ht_cap_enabled(dev))
2772 quirk_disable_msi(dev);
2773}
2774DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
2775 quirk_msi_ht_cap);
2776
2777/*
2778 * The nVidia CK804 chipset may have 2 HT MSI mappings. MSI is supported
2779 * if the MSI capability is set in any of these mappings.
2780 */
2781static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
2782{
2783 struct pci_dev *pdev;
2784
2785 /*
2786 * Check HT MSI cap on this chipset and the root one. A single one
2787 * having MSI is enough to be sure that MSI is supported.
2788 */
2789 pdev = pci_get_slot(dev->bus, 0);
2790 if (!pdev)
2791 return;
2792 if (!msi_ht_cap_enabled(pdev))
2793 quirk_msi_ht_cap(dev);
2794 pci_dev_put(pdev);
2795}
2796DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
2797 quirk_nvidia_ck804_msi_ht_cap);
2798
2799/* Force enable MSI mapping capability on HT bridges */
2800static void ht_enable_msi_mapping(struct pci_dev *dev)
2801{
2802 int pos, ttl = PCI_FIND_CAP_TTL;
2803
2804 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
2805 while (pos && ttl--) {
2806 u8 flags;
2807
2808 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
2809 &flags) == 0) {
2810 pci_info(dev, "Enabling HT MSI Mapping\n");
2811
2812 pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
2813 flags | HT_MSI_FLAGS_ENABLE);
2814 }
2815 pos = pci_find_next_ht_capability(dev, pos,
2816 HT_CAPTYPE_MSI_MAPPING);
2817 }
2818}
2819DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
2820 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
2821 ht_enable_msi_mapping);
2822DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
2823 ht_enable_msi_mapping);
2824
2825/*
2826 * The P5N32-SLI motherboards from Asus have a problem with MSI
2827 * for the MCP55 NIC. It is not yet determined whether the MSI problem
2828 * also affects other devices. As for now, turn off MSI for this device.
2829 */
2830static void nvenet_msi_disable(struct pci_dev *dev)
2831{
2832 const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
2833
2834 if (board_name &&
2835 (strstr(board_name, "P5N32-SLI PREMIUM") ||
2836 strstr(board_name, "P5N32-E SLI"))) {
2837 pci_info(dev, "Disabling MSI for MCP55 NIC on P5N32-SLI\n");
2838 dev->no_msi = 1;
2839 }
2840}
2841DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
2842 PCI_DEVICE_ID_NVIDIA_NVENET_15,
2843 nvenet_msi_disable);
2844
2845/*
2846 * PCIe spec r6.0 sec 6.1.4.3 says that if MSI/MSI-X is enabled, the device
2847 * can't use INTx interrupts. Tegra's PCIe Root Ports don't generate MSI
2848 * interrupts for PME and AER events; instead only INTx interrupts are
2849 * generated. Though Tegra's PCIe Root Ports can generate MSI interrupts
2850 * for other events, since PCIe specification doesn't support using a mix of
2851 * INTx and MSI/MSI-X, it is required to disable MSI interrupts to avoid port
2852 * service drivers registering their respective ISRs for MSIs.
2853 */
2854static void pci_quirk_nvidia_tegra_disable_rp_msi(struct pci_dev *dev)
2855{
2856 dev->no_msi = 1;
2857}
2858DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad0,
2859 PCI_CLASS_BRIDGE_PCI, 8,
2860 pci_quirk_nvidia_tegra_disable_rp_msi);
2861DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad1,
2862 PCI_CLASS_BRIDGE_PCI, 8,
2863 pci_quirk_nvidia_tegra_disable_rp_msi);
2864DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad2,
2865 PCI_CLASS_BRIDGE_PCI, 8,
2866 pci_quirk_nvidia_tegra_disable_rp_msi);
2867DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0,
2868 PCI_CLASS_BRIDGE_PCI, 8,
2869 pci_quirk_nvidia_tegra_disable_rp_msi);
2870DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1,
2871 PCI_CLASS_BRIDGE_PCI, 8,
2872 pci_quirk_nvidia_tegra_disable_rp_msi);
2873DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c,
2874 PCI_CLASS_BRIDGE_PCI, 8,
2875 pci_quirk_nvidia_tegra_disable_rp_msi);
2876DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d,
2877 PCI_CLASS_BRIDGE_PCI, 8,
2878 pci_quirk_nvidia_tegra_disable_rp_msi);
2879DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e12,
2880 PCI_CLASS_BRIDGE_PCI, 8,
2881 pci_quirk_nvidia_tegra_disable_rp_msi);
2882DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e13,
2883 PCI_CLASS_BRIDGE_PCI, 8,
2884 pci_quirk_nvidia_tegra_disable_rp_msi);
2885DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0fae,
2886 PCI_CLASS_BRIDGE_PCI, 8,
2887 pci_quirk_nvidia_tegra_disable_rp_msi);
2888DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0faf,
2889 PCI_CLASS_BRIDGE_PCI, 8,
2890 pci_quirk_nvidia_tegra_disable_rp_msi);
2891DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e5,
2892 PCI_CLASS_BRIDGE_PCI, 8,
2893 pci_quirk_nvidia_tegra_disable_rp_msi);
2894DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e6,
2895 PCI_CLASS_BRIDGE_PCI, 8,
2896 pci_quirk_nvidia_tegra_disable_rp_msi);
2897DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229a,
2898 PCI_CLASS_BRIDGE_PCI, 8,
2899 pci_quirk_nvidia_tegra_disable_rp_msi);
2900DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229c,
2901 PCI_CLASS_BRIDGE_PCI, 8,
2902 pci_quirk_nvidia_tegra_disable_rp_msi);
2903DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229e,
2904 PCI_CLASS_BRIDGE_PCI, 8,
2905 pci_quirk_nvidia_tegra_disable_rp_msi);
2906
2907/*
2908 * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing
2909 * config register. This register controls the routing of legacy
2910 * interrupts from devices that route through the MCP55. If this register
2911 * is misprogrammed, interrupts are only sent to the BSP, unlike
2912 * conventional systems where the IRQ is broadcast to all online CPUs. Not
2913 * having this register set properly prevents kdump from booting up
2914 * properly, so let's make sure that we have it set correctly.
2915 * Note that this is an undocumented register.
2916 */
2917static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
2918{
2919 u32 cfg;
2920
2921 if (!pci_find_capability(dev, PCI_CAP_ID_HT))
2922 return;
2923
2924 pci_read_config_dword(dev, 0x74, &cfg);
2925
2926 if (cfg & ((1 << 2) | (1 << 15))) {
2927 pr_info("Rewriting IRQ routing register on MCP55\n");
2928 cfg &= ~((1 << 2) | (1 << 15));
2929 pci_write_config_dword(dev, 0x74, cfg);
2930 }
2931}
2932DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
2933 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0,
2934 nvbridge_check_legacy_irq_routing);
2935DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
2936 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4,
2937 nvbridge_check_legacy_irq_routing);
2938
2939static int ht_check_msi_mapping(struct pci_dev *dev)
2940{
2941 int pos, ttl = PCI_FIND_CAP_TTL;
2942 int found = 0;
2943
2944 /* Check if there is HT MSI cap or enabled on this device */
2945 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
2946 while (pos && ttl--) {
2947 u8 flags;
2948
2949 if (found < 1)
2950 found = 1;
2951 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
2952 &flags) == 0) {
2953 if (flags & HT_MSI_FLAGS_ENABLE) {
2954 if (found < 2) {
2955 found = 2;
2956 break;
2957 }
2958 }
2959 }
2960 pos = pci_find_next_ht_capability(dev, pos,
2961 HT_CAPTYPE_MSI_MAPPING);
2962 }
2963
2964 return found;
2965}
2966
2967static int host_bridge_with_leaf(struct pci_dev *host_bridge)
2968{
2969 struct pci_dev *dev;
2970 int pos;
2971 int i, dev_no;
2972 int found = 0;
2973
2974 dev_no = host_bridge->devfn >> 3;
2975 for (i = dev_no + 1; i < 0x20; i++) {
2976 dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0));
2977 if (!dev)
2978 continue;
2979
2980 /* found next host bridge? */
2981 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
2982 if (pos != 0) {
2983 pci_dev_put(dev);
2984 break;
2985 }
2986
2987 if (ht_check_msi_mapping(dev)) {
2988 found = 1;
2989 pci_dev_put(dev);
2990 break;
2991 }
2992 pci_dev_put(dev);
2993 }
2994
2995 return found;
2996}
2997
2998#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
2999#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
3000
3001static int is_end_of_ht_chain(struct pci_dev *dev)
3002{
3003 int pos, ctrl_off;
3004 int end = 0;
3005 u16 flags, ctrl;
3006
3007 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
3008
3009 if (!pos)
3010 goto out;
3011
3012 pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags);
3013
3014 ctrl_off = ((flags >> 10) & 1) ?
3015 PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1;
3016 pci_read_config_word(dev, pos + ctrl_off, &ctrl);
3017
3018 if (ctrl & (1 << 6))
3019 end = 1;
3020
3021out:
3022 return end;
3023}
3024
3025static void nv_ht_enable_msi_mapping(struct pci_dev *dev)
3026{
3027 struct pci_dev *host_bridge;
3028 int pos;
3029 int i, dev_no;
3030 int found = 0;
3031
3032 dev_no = dev->devfn >> 3;
3033 for (i = dev_no; i >= 0; i--) {
3034 host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
3035 if (!host_bridge)
3036 continue;
3037
3038 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
3039 if (pos != 0) {
3040 found = 1;
3041 break;
3042 }
3043 pci_dev_put(host_bridge);
3044 }
3045
3046 if (!found)
3047 return;
3048
3049 /* don't enable end_device/host_bridge with leaf directly here */
3050 if (host_bridge == dev && is_end_of_ht_chain(host_bridge) &&
3051 host_bridge_with_leaf(host_bridge))
3052 goto out;
3053
3054 /* root did that ! */
3055 if (msi_ht_cap_enabled(host_bridge))
3056 goto out;
3057
3058 ht_enable_msi_mapping(dev);
3059
3060out:
3061 pci_dev_put(host_bridge);
3062}
3063
3064static void ht_disable_msi_mapping(struct pci_dev *dev)
3065{
3066 int pos, ttl = PCI_FIND_CAP_TTL;
3067
3068 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
3069 while (pos && ttl--) {
3070 u8 flags;
3071
3072 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
3073 &flags) == 0) {
3074 pci_info(dev, "Disabling HT MSI Mapping\n");
3075
3076 pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
3077 flags & ~HT_MSI_FLAGS_ENABLE);
3078 }
3079 pos = pci_find_next_ht_capability(dev, pos,
3080 HT_CAPTYPE_MSI_MAPPING);
3081 }
3082}
3083
3084static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
3085{
3086 struct pci_dev *host_bridge;
3087 int pos;
3088 int found;
3089
3090 if (!pci_msi_enabled())
3091 return;
3092
3093 /* check if there is HT MSI cap or enabled on this device */
3094 found = ht_check_msi_mapping(dev);
3095
3096 /* no HT MSI CAP */
3097 if (found == 0)
3098 return;
3099
3100 /*
3101 * HT MSI mapping should be disabled on devices that are below
3102 * a non-HyperTransport host bridge. Locate the host bridge.
3103 */
3104 host_bridge = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), 0,
3105 PCI_DEVFN(0, 0));
3106 if (host_bridge == NULL) {
3107 pci_warn(dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n");
3108 return;
3109 }
3110
3111 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
3112 if (pos != 0) {
3113 /* Host bridge is to HT */
3114 if (found == 1) {
3115 /* it is not enabled, try to enable it */
3116 if (all)
3117 ht_enable_msi_mapping(dev);
3118 else
3119 nv_ht_enable_msi_mapping(dev);
3120 }
3121 goto out;
3122 }
3123
3124 /* HT MSI is not enabled */
3125 if (found == 1)
3126 goto out;
3127
3128 /* Host bridge is not to HT, disable HT MSI mapping on this device */
3129 ht_disable_msi_mapping(dev);
3130
3131out:
3132 pci_dev_put(host_bridge);
3133}
3134
3135static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
3136{
3137 return __nv_msi_ht_cap_quirk(dev, 1);
3138}
3139DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
3140DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
3141
3142static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
3143{
3144 return __nv_msi_ht_cap_quirk(dev, 0);
3145}
3146DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
3147DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
3148
3149static void quirk_msi_intx_disable_bug(struct pci_dev *dev)
3150{
3151 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
3152}
3153
3154static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
3155{
3156 struct pci_dev *p;
3157
3158 /*
3159 * SB700 MSI issue will be fixed at HW level from revision A21;
3160 * we need check PCI REVISION ID of SMBus controller to get SB700
3161 * revision.
3162 */
3163 p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
3164 NULL);
3165 if (!p)
3166 return;
3167
3168 if ((p->revision < 0x3B) && (p->revision >= 0x30))
3169 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
3170 pci_dev_put(p);
3171}
3172
3173static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev)
3174{
3175 /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */
3176 if (dev->revision < 0x18) {
3177 pci_info(dev, "set MSI_INTX_DISABLE_BUG flag\n");
3178 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
3179 }
3180}
3181DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
3182 PCI_DEVICE_ID_TIGON3_5780,
3183 quirk_msi_intx_disable_bug);
3184DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
3185 PCI_DEVICE_ID_TIGON3_5780S,
3186 quirk_msi_intx_disable_bug);
3187DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
3188 PCI_DEVICE_ID_TIGON3_5714,
3189 quirk_msi_intx_disable_bug);
3190DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
3191 PCI_DEVICE_ID_TIGON3_5714S,
3192 quirk_msi_intx_disable_bug);
3193DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
3194 PCI_DEVICE_ID_TIGON3_5715,
3195 quirk_msi_intx_disable_bug);
3196DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
3197 PCI_DEVICE_ID_TIGON3_5715S,
3198 quirk_msi_intx_disable_bug);
3199
3200DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
3201 quirk_msi_intx_disable_ati_bug);
3202DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391,
3203 quirk_msi_intx_disable_ati_bug);
3204DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392,
3205 quirk_msi_intx_disable_ati_bug);
3206DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393,
3207 quirk_msi_intx_disable_ati_bug);
3208DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394,
3209 quirk_msi_intx_disable_ati_bug);
3210
3211DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373,
3212 quirk_msi_intx_disable_bug);
3213DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374,
3214 quirk_msi_intx_disable_bug);
3215DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
3216 quirk_msi_intx_disable_bug);
3217
3218DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062,
3219 quirk_msi_intx_disable_bug);
3220DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063,
3221 quirk_msi_intx_disable_bug);
3222DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060,
3223 quirk_msi_intx_disable_bug);
3224DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062,
3225 quirk_msi_intx_disable_bug);
3226DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073,
3227 quirk_msi_intx_disable_bug);
3228DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083,
3229 quirk_msi_intx_disable_bug);
3230DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090,
3231 quirk_msi_intx_disable_qca_bug);
3232DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091,
3233 quirk_msi_intx_disable_qca_bug);
3234DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0,
3235 quirk_msi_intx_disable_qca_bug);
3236DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
3237 quirk_msi_intx_disable_qca_bug);
3238DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
3239 quirk_msi_intx_disable_qca_bug);
3240
3241/*
3242 * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it
3243 * should be disabled on platforms where the device (mistakenly) advertises it.
3244 *
3245 * Notice that this quirk also disables MSI (which may work, but hasn't been
3246 * tested), since currently there is no standard way to disable only MSI-X.
3247 *
3248 * The 0031 device id is reused for other non Root Port device types,
3249 * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
3250 */
3251static void quirk_al_msi_disable(struct pci_dev *dev)
3252{
3253 dev->no_msi = 1;
3254 pci_warn(dev, "Disabling MSI/MSI-X\n");
3255}
3256DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
3257 PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable);
3258#endif /* CONFIG_PCI_MSI */
3259
3260/*
3261 * Allow manual resource allocation for PCI hotplug bridges via
3262 * pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For some PCI-PCI
3263 * hotplug bridges, like PLX 6254 (former HINT HB6), kernel fails to
3264 * allocate resources when hotplug device is inserted and PCI bus is
3265 * rescanned.
3266 */
3267static void quirk_hotplug_bridge(struct pci_dev *dev)
3268{
3269 dev->is_hotplug_bridge = 1;
3270}
3271DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
3272
3273/*
3274 * This is a quirk for the Ricoh MMC controller found as a part of some
3275 * multifunction chips.
3276 *
3277 * This is very similar and based on the ricoh_mmc driver written by
3278 * Philip Langdale. Thank you for these magic sequences.
3279 *
3280 * These chips implement the four main memory card controllers (SD, MMC,
3281 * MS, xD) and one or both of CardBus or FireWire.
3282 *
3283 * It happens that they implement SD and MMC support as separate
3284 * controllers (and PCI functions). The Linux SDHCI driver supports MMC
3285 * cards but the chip detects MMC cards in hardware and directs them to the
3286 * MMC controller - so the SDHCI driver never sees them.
3287 *
3288 * To get around this, we must disable the useless MMC controller. At that
3289 * point, the SDHCI controller will start seeing them. It seems to be the
3290 * case that the relevant PCI registers to deactivate the MMC controller
3291 * live on PCI function 0, which might be the CardBus controller or the
3292 * FireWire controller, depending on the particular chip in question
3293 *
3294 * This has to be done early, because as soon as we disable the MMC controller
3295 * other PCI functions shift up one level, e.g. function #2 becomes function
3296 * #1, and this will confuse the PCI core.
3297 */
3298#ifdef CONFIG_MMC_RICOH_MMC
3299static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev)
3300{
3301 u8 write_enable;
3302 u8 write_target;
3303 u8 disable;
3304
3305 /*
3306 * Disable via CardBus interface
3307 *
3308 * This must be done via function #0
3309 */
3310 if (PCI_FUNC(dev->devfn))
3311 return;
3312
3313 pci_read_config_byte(dev, 0xB7, &disable);
3314 if (disable & 0x02)
3315 return;
3316
3317 pci_read_config_byte(dev, 0x8E, &write_enable);
3318 pci_write_config_byte(dev, 0x8E, 0xAA);
3319 pci_read_config_byte(dev, 0x8D, &write_target);
3320 pci_write_config_byte(dev, 0x8D, 0xB7);
3321 pci_write_config_byte(dev, 0xB7, disable | 0x02);
3322 pci_write_config_byte(dev, 0x8E, write_enable);
3323 pci_write_config_byte(dev, 0x8D, write_target);
3324
3325 pci_notice(dev, "proprietary Ricoh MMC controller disabled (via CardBus function)\n");
3326 pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n");
3327}
3328DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
3329DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
3330
3331static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
3332{
3333 u8 write_enable;
3334 u8 disable;
3335
3336 /*
3337 * Disable via FireWire interface
3338 *
3339 * This must be done via function #0
3340 */
3341 if (PCI_FUNC(dev->devfn))
3342 return;
3343 /*
3344 * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize
3345 * certain types of SD/MMC cards. Lowering the SD base clock
3346 * frequency from 200Mhz to 50Mhz fixes this issue.
3347 *
3348 * 0x150 - SD2.0 mode enable for changing base clock
3349 * frequency to 50Mhz
3350 * 0xe1 - Base clock frequency
3351 * 0x32 - 50Mhz new clock frequency
3352 * 0xf9 - Key register for 0x150
3353 * 0xfc - key register for 0xe1
3354 */
3355 if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 ||
3356 dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
3357 pci_write_config_byte(dev, 0xf9, 0xfc);
3358 pci_write_config_byte(dev, 0x150, 0x10);
3359 pci_write_config_byte(dev, 0xf9, 0x00);
3360 pci_write_config_byte(dev, 0xfc, 0x01);
3361 pci_write_config_byte(dev, 0xe1, 0x32);
3362 pci_write_config_byte(dev, 0xfc, 0x00);
3363
3364 pci_notice(dev, "MMC controller base frequency changed to 50Mhz.\n");
3365 }
3366
3367 pci_read_config_byte(dev, 0xCB, &disable);
3368
3369 if (disable & 0x02)
3370 return;
3371
3372 pci_read_config_byte(dev, 0xCA, &write_enable);
3373 pci_write_config_byte(dev, 0xCA, 0x57);
3374 pci_write_config_byte(dev, 0xCB, disable | 0x02);
3375 pci_write_config_byte(dev, 0xCA, write_enable);
3376
3377 pci_notice(dev, "proprietary Ricoh MMC controller disabled (via FireWire function)\n");
3378 pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n");
3379
3380}
3381DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
3382DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
3383DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
3384DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
3385DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
3386DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
3387#endif /*CONFIG_MMC_RICOH_MMC*/
3388
3389#ifdef CONFIG_DMAR_TABLE
3390#define VTUNCERRMSK_REG 0x1ac
3391#define VTD_MSK_SPEC_ERRORS (1 << 31)
3392/*
3393 * This is a quirk for masking VT-d spec-defined errors to platform error
3394 * handling logic. Without this, platforms using Intel 7500, 5500 chipsets
3395 * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
3396 * on the RAS config settings of the platform) when a VT-d fault happens.
3397 * The resulting SMI caused the system to hang.
3398 *
3399 * VT-d spec-related errors are already handled by the VT-d OS code, so no
3400 * need to report the same error through other channels.
3401 */
3402static void vtd_mask_spec_errors(struct pci_dev *dev)
3403{
3404 u32 word;
3405
3406 pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
3407 pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
3408}
3409DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
3410DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
3411#endif
3412
3413static void fixup_ti816x_class(struct pci_dev *dev)
3414{
3415 u32 class = dev->class;
3416
3417 /* TI 816x devices do not have class code set when in PCIe boot mode */
3418 dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8;
3419 pci_info(dev, "PCI class overridden (%#08x -> %#08x)\n",
3420 class, dev->class);
3421}
3422DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800,
3423 PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class);
3424
3425/*
3426 * Some PCIe devices do not work reliably with the claimed maximum
3427 * payload size supported.
3428 */
3429static void fixup_mpss_256(struct pci_dev *dev)
3430{
3431 dev->pcie_mpss = 1; /* 256 bytes */
3432}
3433DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
3434 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
3435DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
3436 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
3437DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
3438 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
3439DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ASMEDIA, 0x0612, fixup_mpss_256);
3440
3441/*
3442 * Intel 5000 and 5100 Memory controllers have an erratum with read completion
3443 * coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
3444 * Since there is no way of knowing what the PCIe MPS on each fabric will be
3445 * until all of the devices are discovered and buses walked, read completion
3446 * coalescing must be disabled. Unfortunately, it cannot be re-enabled because
3447 * it is possible to hotplug a device with MPS of 256B.
3448 */
3449static void quirk_intel_mc_errata(struct pci_dev *dev)
3450{
3451 int err;
3452 u16 rcc;
3453
3454 if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
3455 pcie_bus_config == PCIE_BUS_DEFAULT)
3456 return;
3457
3458 /*
3459 * Intel erratum specifies bits to change but does not say what
3460 * they are. Keeping them magical until such time as the registers
3461 * and values can be explained.
3462 */
3463 err = pci_read_config_word(dev, 0x48, &rcc);
3464 if (err) {
3465 pci_err(dev, "Error attempting to read the read completion coalescing register\n");
3466 return;
3467 }
3468
3469 if (!(rcc & (1 << 10)))
3470 return;
3471
3472 rcc &= ~(1 << 10);
3473
3474 err = pci_write_config_word(dev, 0x48, rcc);
3475 if (err) {
3476 pci_err(dev, "Error attempting to write the read completion coalescing register\n");
3477 return;
3478 }
3479
3480 pr_info_once("Read completion coalescing disabled due to hardware erratum relating to 256B MPS\n");
3481}
3482/* Intel 5000 series memory controllers and ports 2-7 */
3483DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
3484DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
3485DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
3486DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
3487DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
3488DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
3489DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
3490DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
3491DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
3492DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
3493DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
3494DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
3495DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
3496DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
3497/* Intel 5100 series memory controllers and ports 2-7 */
3498DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
3499DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
3500DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
3501DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
3502DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
3503DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
3504DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
3505DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
3506DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
3507DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
3508DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
3509
3510/*
3511 * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
3512 * To work around this, query the size it should be configured to by the
3513 * device and modify the resource end to correspond to this new size.
3514 */
3515static void quirk_intel_ntb(struct pci_dev *dev)
3516{
3517 int rc;
3518 u8 val;
3519
3520 rc = pci_read_config_byte(dev, 0x00D0, &val);
3521 if (rc)
3522 return;
3523
3524 resource_set_size(&dev->resource[2], (resource_size_t)1 << val);
3525
3526 rc = pci_read_config_byte(dev, 0x00D1, &val);
3527 if (rc)
3528 return;
3529
3530 resource_set_size(&dev->resource[4], (resource_size_t)1 << val);
3531}
3532DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
3533DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
3534
3535/*
3536 * Some BIOS implementations leave the Intel GPU interrupts enabled, even
3537 * though no one is handling them (e.g., if the i915 driver is never
3538 * loaded). Additionally the interrupt destination is not set up properly
3539 * and the interrupt ends up -somewhere-.
3540 *
3541 * These spurious interrupts are "sticky" and the kernel disables the
3542 * (shared) interrupt line after 100,000+ generated interrupts.
3543 *
3544 * Fix it by disabling the still enabled interrupts. This resolves crashes
3545 * often seen on monitor unplug.
3546 */
3547#define I915_DEIER_REG 0x4400c
3548static void disable_igfx_irq(struct pci_dev *dev)
3549{
3550 void __iomem *regs = pci_iomap(dev, 0, 0);
3551 if (regs == NULL) {
3552 pci_warn(dev, "igfx quirk: Can't iomap PCI device\n");
3553 return;
3554 }
3555
3556 /* Check if any interrupt line is still enabled */
3557 if (readl(regs + I915_DEIER_REG) != 0) {
3558 pci_warn(dev, "BIOS left Intel GPU interrupts enabled; disabling\n");
3559
3560 writel(0, regs + I915_DEIER_REG);
3561 }
3562
3563 pci_iounmap(dev, regs);
3564}
3565DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0042, disable_igfx_irq);
3566DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0046, disable_igfx_irq);
3567DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x004a, disable_igfx_irq);
3568DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
3569DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0106, disable_igfx_irq);
3570DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
3571DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
3572
3573/*
3574 * PCI devices which are on Intel chips can skip the 10ms delay
3575 * before entering D3 mode.
3576 */
3577static void quirk_remove_d3hot_delay(struct pci_dev *dev)
3578{
3579 dev->d3hot_delay = 0;
3580}
3581/* C600 Series devices do not need 10ms d3hot_delay */
3582DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3hot_delay);
3583DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3hot_delay);
3584DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3hot_delay);
3585/* Lynxpoint-H PCH devices do not need 10ms d3hot_delay */
3586DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3hot_delay);
3587DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3hot_delay);
3588DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3hot_delay);
3589DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3hot_delay);
3590DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3hot_delay);
3591DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3hot_delay);
3592DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3hot_delay);
3593DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3hot_delay);
3594DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3hot_delay);
3595DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3hot_delay);
3596DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3hot_delay);
3597/* Intel Cherrytrail devices do not need 10ms d3hot_delay */
3598DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3hot_delay);
3599DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3hot_delay);
3600DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3hot_delay);
3601DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3hot_delay);
3602DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3hot_delay);
3603DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3hot_delay);
3604DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3hot_delay);
3605DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3hot_delay);
3606DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3hot_delay);
3607
3608/*
3609 * Some devices may pass our check in pci_intx_mask_supported() if
3610 * PCI_COMMAND_INTX_DISABLE works though they actually do not properly
3611 * support this feature.
3612 */
3613static void quirk_broken_intx_masking(struct pci_dev *dev)
3614{
3615 dev->broken_intx_masking = 1;
3616}
3617DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x0030,
3618 quirk_broken_intx_masking);
3619DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
3620 quirk_broken_intx_masking);
3621DECLARE_PCI_FIXUP_FINAL(0x1b7c, 0x0004, /* Ceton InfiniTV4 */
3622 quirk_broken_intx_masking);
3623DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2,
3624 quirk_broken_intx_masking);
3625
3626/*
3627 * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10)
3628 * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC
3629 *
3630 * RTL8110SC - Fails under PCI device assignment using DisINTx masking.
3631 */
3632DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, 0x8169,
3633 quirk_broken_intx_masking);
3634
3635/*
3636 * Intel i40e (XL710/X710) 10/20/40GbE NICs all have broken INTx masking,
3637 * DisINTx can be set but the interrupt status bit is non-functional.
3638 */
3639DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, quirk_broken_intx_masking);
3640DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, quirk_broken_intx_masking);
3641DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, quirk_broken_intx_masking);
3642DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, quirk_broken_intx_masking);
3643DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, quirk_broken_intx_masking);
3644DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, quirk_broken_intx_masking);
3645DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, quirk_broken_intx_masking);
3646DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, quirk_broken_intx_masking);
3647DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, quirk_broken_intx_masking);
3648DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, quirk_broken_intx_masking);
3649DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, quirk_broken_intx_masking);
3650DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158a, quirk_broken_intx_masking);
3651DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158b, quirk_broken_intx_masking);
3652DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, quirk_broken_intx_masking);
3653DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, quirk_broken_intx_masking);
3654DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, quirk_broken_intx_masking);
3655
3656static u16 mellanox_broken_intx_devs[] = {
3657 PCI_DEVICE_ID_MELLANOX_HERMON_SDR,
3658 PCI_DEVICE_ID_MELLANOX_HERMON_DDR,
3659 PCI_DEVICE_ID_MELLANOX_HERMON_QDR,
3660 PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2,
3661 PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2,
3662 PCI_DEVICE_ID_MELLANOX_HERMON_EN,
3663 PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2,
3664 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN,
3665 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2,
3666 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2,
3667 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2,
3668 PCI_DEVICE_ID_MELLANOX_CONNECTX2,
3669 PCI_DEVICE_ID_MELLANOX_CONNECTX3,
3670 PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO,
3671};
3672
3673#define CONNECTX_4_CURR_MAX_MINOR 99
3674#define CONNECTX_4_INTX_SUPPORT_MINOR 14
3675
3676/*
3677 * Check ConnectX-4/LX FW version to see if it supports legacy interrupts.
3678 * If so, don't mark it as broken.
3679 * FW minor > 99 means older FW version format and no INTx masking support.
3680 * FW minor < 14 means new FW version format and no INTx masking support.
3681 */
3682static void mellanox_check_broken_intx_masking(struct pci_dev *pdev)
3683{
3684 __be32 __iomem *fw_ver;
3685 u16 fw_major;
3686 u16 fw_minor;
3687 u16 fw_subminor;
3688 u32 fw_maj_min;
3689 u32 fw_sub_min;
3690 int i;
3691
3692 for (i = 0; i < ARRAY_SIZE(mellanox_broken_intx_devs); i++) {
3693 if (pdev->device == mellanox_broken_intx_devs[i]) {
3694 pdev->broken_intx_masking = 1;
3695 return;
3696 }
3697 }
3698
3699 /*
3700 * Getting here means Connect-IB cards and up. Connect-IB has no INTx
3701 * support so shouldn't be checked further
3702 */
3703 if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB)
3704 return;
3705
3706 if (pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4 &&
3707 pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX)
3708 return;
3709
3710 /* For ConnectX-4 and ConnectX-4LX, need to check FW support */
3711 if (pci_enable_device_mem(pdev)) {
3712 pci_warn(pdev, "Can't enable device memory\n");
3713 return;
3714 }
3715
3716 fw_ver = ioremap(pci_resource_start(pdev, 0), 4);
3717 if (!fw_ver) {
3718 pci_warn(pdev, "Can't map ConnectX-4 initialization segment\n");
3719 goto out;
3720 }
3721
3722 /* Reading from resource space should be 32b aligned */
3723 fw_maj_min = ioread32be(fw_ver);
3724 fw_sub_min = ioread32be(fw_ver + 1);
3725 fw_major = fw_maj_min & 0xffff;
3726 fw_minor = fw_maj_min >> 16;
3727 fw_subminor = fw_sub_min & 0xffff;
3728 if (fw_minor > CONNECTX_4_CURR_MAX_MINOR ||
3729 fw_minor < CONNECTX_4_INTX_SUPPORT_MINOR) {
3730 pci_warn(pdev, "ConnectX-4: FW %u.%u.%u doesn't support INTx masking, disabling. Please upgrade FW to %d.14.1100 and up for INTx support\n",
3731 fw_major, fw_minor, fw_subminor, pdev->device ==
3732 PCI_DEVICE_ID_MELLANOX_CONNECTX4 ? 12 : 14);
3733 pdev->broken_intx_masking = 1;
3734 }
3735
3736 iounmap(fw_ver);
3737
3738out:
3739 pci_disable_device(pdev);
3740}
3741DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID,
3742 mellanox_check_broken_intx_masking);
3743
3744static void quirk_no_bus_reset(struct pci_dev *dev)
3745{
3746 dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET;
3747}
3748
3749/*
3750 * Some NVIDIA GPU devices do not work with bus reset, SBR needs to be
3751 * prevented for those affected devices.
3752 */
3753static void quirk_nvidia_no_bus_reset(struct pci_dev *dev)
3754{
3755 if ((dev->device & 0xffc0) == 0x2340)
3756 quirk_no_bus_reset(dev);
3757}
3758DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
3759 quirk_nvidia_no_bus_reset);
3760
3761/*
3762 * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset.
3763 * The device will throw a Link Down error on AER-capable systems and
3764 * regardless of AER, config space of the device is never accessible again
3765 * and typically causes the system to hang or reset when access is attempted.
3766 * https://lore.kernel.org/r/20140923210318.498dacbd@dualc.maya.org/
3767 */
3768DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
3769DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset);
3770DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
3771DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
3772DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
3773DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003e, quirk_no_bus_reset);
3774
3775/*
3776 * Root port on some Cavium CN8xxx chips do not successfully complete a bus
3777 * reset when used with certain child devices. After the reset, config
3778 * accesses to the child may fail.
3779 */
3780DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);
3781
3782/*
3783 * Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
3784 * automatically disables LTSSM when Secondary Bus Reset is received and
3785 * the device stops working. Prevent bus reset for these devices. With
3786 * this change, the device can be assigned to VMs with VFIO, but it will
3787 * leak state between VMs. Reference
3788 * https://e2e.ti.com/support/processors/f/791/t/954382
3789 */
3790DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset);
3791
3792static void quirk_no_pm_reset(struct pci_dev *dev)
3793{
3794 /*
3795 * We can't do a bus reset on root bus devices, but an ineffective
3796 * PM reset may be better than nothing.
3797 */
3798 if (!pci_is_root_bus(dev->bus))
3799 dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET;
3800}
3801
3802/*
3803 * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition
3804 * causes a reset (i.e., they advertise NoSoftRst-). This transition seems
3805 * to have no effect on the device: it retains the framebuffer contents and
3806 * monitor sync. Advertising this support makes other layers, like VFIO,
3807 * assume pci_reset_function() is viable for this device. Mark it as
3808 * unavailable to skip it when testing reset methods.
3809 */
3810DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
3811 PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset);
3812
3813/*
3814 * Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a reset
3815 * (i.e., they advertise NoSoftRst-). However, this transition does not have
3816 * any effect on the device: It continues to be operational and network ports
3817 * remain up. Advertising this support makes it seem as if a PM reset is viable
3818 * for these devices. Mark it as unavailable to skip it when testing reset
3819 * methods.
3820 */
3821DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcb84, quirk_no_pm_reset);
3822DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf6c, quirk_no_pm_reset);
3823DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf70, quirk_no_pm_reset);
3824DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf80, quirk_no_pm_reset);
3825
3826/*
3827 * Thunderbolt controllers with broken MSI hotplug signaling:
3828 * Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part
3829 * of the 2nd generation (Cactus Ridge 4C up to revision 1, Port Ridge).
3830 */
3831static void quirk_thunderbolt_hotplug_msi(struct pci_dev *pdev)
3832{
3833 if (pdev->is_hotplug_bridge &&
3834 (pdev->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C ||
3835 pdev->revision <= 1))
3836 pdev->no_msi = 1;
3837}
3838DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_RIDGE,
3839 quirk_thunderbolt_hotplug_msi);
3840DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EAGLE_RIDGE,
3841 quirk_thunderbolt_hotplug_msi);
3842DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_PEAK,
3843 quirk_thunderbolt_hotplug_msi);
3844DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
3845 quirk_thunderbolt_hotplug_msi);
3846DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE,
3847 quirk_thunderbolt_hotplug_msi);
3848
3849#ifdef CONFIG_ACPI
3850/*
3851 * Apple: Shutdown Cactus Ridge Thunderbolt controller.
3852 *
3853 * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be
3854 * shutdown before suspend. Otherwise the native host interface (NHI) will not
3855 * be present after resume if a device was plugged in before suspend.
3856 *
3857 * The Thunderbolt controller consists of a PCIe switch with downstream
3858 * bridges leading to the NHI and to the tunnel PCI bridges.
3859 *
3860 * This quirk cuts power to the whole chip. Therefore we have to apply it
3861 * during suspend_noirq of the upstream bridge.
3862 *
3863 * Power is automagically restored before resume. No action is needed.
3864 */
3865static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
3866{
3867 acpi_handle bridge, SXIO, SXFP, SXLV;
3868
3869 if (!x86_apple_machine)
3870 return;
3871 if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM)
3872 return;
3873
3874 /*
3875 * SXIO/SXFP/SXLF turns off power to the Thunderbolt controller.
3876 * We don't know how to turn it back on again, but firmware does,
3877 * so we can only use SXIO/SXFP/SXLF if we're suspending via
3878 * firmware.
3879 */
3880 if (!pm_suspend_via_firmware())
3881 return;
3882
3883 bridge = ACPI_HANDLE(&dev->dev);
3884 if (!bridge)
3885 return;
3886
3887 /*
3888 * SXIO and SXLV are present only on machines requiring this quirk.
3889 * Thunderbolt bridges in external devices might have the same
3890 * device ID as those on the host, but they will not have the
3891 * associated ACPI methods. This implicitly checks that we are at
3892 * the right bridge.
3893 */
3894 if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO))
3895 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP))
3896 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV)))
3897 return;
3898 pci_info(dev, "quirk: cutting power to Thunderbolt controller...\n");
3899
3900 /* magic sequence */
3901 acpi_execute_simple_method(SXIO, NULL, 1);
3902 acpi_execute_simple_method(SXFP, NULL, 0);
3903 msleep(300);
3904 acpi_execute_simple_method(SXLV, NULL, 0);
3905 acpi_execute_simple_method(SXIO, NULL, 0);
3906 acpi_execute_simple_method(SXLV, NULL, 0);
3907}
3908DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
3909 PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
3910 quirk_apple_poweroff_thunderbolt);
3911#endif
3912
3913/*
3914 * Following are device-specific reset methods which can be used to
3915 * reset a single function if other methods (e.g. FLR, PM D0->D3) are
3916 * not available.
3917 */
3918static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, bool probe)
3919{
3920 /*
3921 * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf
3922 *
3923 * The 82599 supports FLR on VFs, but FLR support is reported only
3924 * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5).
3925 * Thus we must call pcie_flr() directly without first checking if it is
3926 * supported.
3927 */
3928 if (!probe)
3929 pcie_flr(dev);
3930 return 0;
3931}
3932
3933#define SOUTH_CHICKEN2 0xc2004
3934#define PCH_PP_STATUS 0xc7200
3935#define PCH_PP_CONTROL 0xc7204
3936#define MSG_CTL 0x45010
3937#define NSDE_PWR_STATE 0xd0100
3938#define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */
3939
3940static int reset_ivb_igd(struct pci_dev *dev, bool probe)
3941{
3942 void __iomem *mmio_base;
3943 unsigned long timeout;
3944 u32 val;
3945
3946 if (probe)
3947 return 0;
3948
3949 mmio_base = pci_iomap(dev, 0, 0);
3950 if (!mmio_base)
3951 return -ENOMEM;
3952
3953 iowrite32(0x00000002, mmio_base + MSG_CTL);
3954
3955 /*
3956 * Clobbering SOUTH_CHICKEN2 register is fine only if the next
3957 * driver loaded sets the right bits. However, this's a reset and
3958 * the bits have been set by i915 previously, so we clobber
3959 * SOUTH_CHICKEN2 register directly here.
3960 */
3961 iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2);
3962
3963 val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe;
3964 iowrite32(val, mmio_base + PCH_PP_CONTROL);
3965
3966 timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT);
3967 do {
3968 val = ioread32(mmio_base + PCH_PP_STATUS);
3969 if ((val & 0xb0000000) == 0)
3970 goto reset_complete;
3971 msleep(10);
3972 } while (time_before(jiffies, timeout));
3973 pci_warn(dev, "timeout during reset\n");
3974
3975reset_complete:
3976 iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE);
3977
3978 pci_iounmap(dev, mmio_base);
3979 return 0;
3980}
3981
3982/* Device-specific reset method for Chelsio T4-based adapters */
3983static int reset_chelsio_generic_dev(struct pci_dev *dev, bool probe)
3984{
3985 u16 old_command;
3986 u16 msix_flags;
3987
3988 /*
3989 * If this isn't a Chelsio T4-based device, return -ENOTTY indicating
3990 * that we have no device-specific reset method.
3991 */
3992 if ((dev->device & 0xf000) != 0x4000)
3993 return -ENOTTY;
3994
3995 /*
3996 * If this is the "probe" phase, return 0 indicating that we can
3997 * reset this device.
3998 */
3999 if (probe)
4000 return 0;
4001
4002 /*
4003 * T4 can wedge if there are DMAs in flight within the chip and Bus
4004 * Master has been disabled. We need to have it on till the Function
4005 * Level Reset completes. (BUS_MASTER is disabled in
4006 * pci_reset_function()).
4007 */
4008 pci_read_config_word(dev, PCI_COMMAND, &old_command);
4009 pci_write_config_word(dev, PCI_COMMAND,
4010 old_command | PCI_COMMAND_MASTER);
4011
4012 /*
4013 * Perform the actual device function reset, saving and restoring
4014 * configuration information around the reset.
4015 */
4016 pci_save_state(dev);
4017
4018 /*
4019 * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts
4020 * are disabled when an MSI-X interrupt message needs to be delivered.
4021 * So we briefly re-enable MSI-X interrupts for the duration of the
4022 * FLR. The pci_restore_state() below will restore the original
4023 * MSI-X state.
4024 */
4025 pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags);
4026 if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0)
4027 pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS,
4028 msix_flags |
4029 PCI_MSIX_FLAGS_ENABLE |
4030 PCI_MSIX_FLAGS_MASKALL);
4031
4032 pcie_flr(dev);
4033
4034 /*
4035 * Restore the configuration information (BAR values, etc.) including
4036 * the original PCI Configuration Space Command word, and return
4037 * success.
4038 */
4039 pci_restore_state(dev);
4040 pci_write_config_word(dev, PCI_COMMAND, old_command);
4041 return 0;
4042}
4043
4044#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
4045#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156
4046#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166
4047
4048/*
4049 * The Samsung SM961/PM961 controller can sometimes enter a fatal state after
4050 * FLR where config space reads from the device return -1. We seem to be
4051 * able to avoid this condition if we disable the NVMe controller prior to
4052 * FLR. This quirk is generic for any NVMe class device requiring similar
4053 * assistance to quiesce the device prior to FLR.
4054 *
4055 * NVMe specification: https://nvmexpress.org/resources/specifications/
4056 * Revision 1.0e:
4057 * Chapter 2: Required and optional PCI config registers
4058 * Chapter 3: NVMe control registers
4059 * Chapter 7.3: Reset behavior
4060 */
4061static int nvme_disable_and_flr(struct pci_dev *dev, bool probe)
4062{
4063 void __iomem *bar;
4064 u16 cmd;
4065 u32 cfg;
4066
4067 if (dev->class != PCI_CLASS_STORAGE_EXPRESS ||
4068 pcie_reset_flr(dev, PCI_RESET_PROBE) || !pci_resource_start(dev, 0))
4069 return -ENOTTY;
4070
4071 if (probe)
4072 return 0;
4073
4074 bar = pci_iomap(dev, 0, NVME_REG_CC + sizeof(cfg));
4075 if (!bar)
4076 return -ENOTTY;
4077
4078 pci_read_config_word(dev, PCI_COMMAND, &cmd);
4079 pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MEMORY);
4080
4081 cfg = readl(bar + NVME_REG_CC);
4082
4083 /* Disable controller if enabled */
4084 if (cfg & NVME_CC_ENABLE) {
4085 u32 cap = readl(bar + NVME_REG_CAP);
4086 unsigned long timeout;
4087
4088 /*
4089 * Per nvme_disable_ctrl() skip shutdown notification as it
4090 * could complete commands to the admin queue. We only intend
4091 * to quiesce the device before reset.
4092 */
4093 cfg &= ~(NVME_CC_SHN_MASK | NVME_CC_ENABLE);
4094
4095 writel(cfg, bar + NVME_REG_CC);
4096
4097 /*
4098 * Some controllers require an additional delay here, see
4099 * NVME_QUIRK_DELAY_BEFORE_CHK_RDY. None of those are yet
4100 * supported by this quirk.
4101 */
4102
4103 /* Cap register provides max timeout in 500ms increments */
4104 timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies;
4105
4106 for (;;) {
4107 u32 status = readl(bar + NVME_REG_CSTS);
4108
4109 /* Ready status becomes zero on disable complete */
4110 if (!(status & NVME_CSTS_RDY))
4111 break;
4112
4113 msleep(100);
4114
4115 if (time_after(jiffies, timeout)) {
4116 pci_warn(dev, "Timeout waiting for NVMe ready status to clear after disable\n");
4117 break;
4118 }
4119 }
4120 }
4121
4122 pci_iounmap(dev, bar);
4123
4124 pcie_flr(dev);
4125
4126 return 0;
4127}
4128
4129/*
4130 * Some NVMe controllers such as Intel DC P3700 and Solidigm P44 Pro will
4131 * timeout waiting for ready status to change after NVMe enable if the driver
4132 * starts interacting with the device too soon after FLR. A 250ms delay after
4133 * FLR has heuristically proven to produce reliably working results for device
4134 * assignment cases.
4135 */
4136static int delay_250ms_after_flr(struct pci_dev *dev, bool probe)
4137{
4138 if (probe)
4139 return pcie_reset_flr(dev, PCI_RESET_PROBE);
4140
4141 pcie_reset_flr(dev, PCI_RESET_DO_RESET);
4142
4143 msleep(250);
4144
4145 return 0;
4146}
4147
4148#define PCI_DEVICE_ID_HINIC_VF 0x375E
4149#define HINIC_VF_FLR_TYPE 0x1000
4150#define HINIC_VF_FLR_CAP_BIT (1UL << 30)
4151#define HINIC_VF_OP 0xE80
4152#define HINIC_VF_FLR_PROC_BIT (1UL << 18)
4153#define HINIC_OPERATION_TIMEOUT 15000 /* 15 seconds */
4154
4155/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
4156static int reset_hinic_vf_dev(struct pci_dev *pdev, bool probe)
4157{
4158 unsigned long timeout;
4159 void __iomem *bar;
4160 u32 val;
4161
4162 if (probe)
4163 return 0;
4164
4165 bar = pci_iomap(pdev, 0, 0);
4166 if (!bar)
4167 return -ENOTTY;
4168
4169 /* Get and check firmware capabilities */
4170 val = ioread32be(bar + HINIC_VF_FLR_TYPE);
4171 if (!(val & HINIC_VF_FLR_CAP_BIT)) {
4172 pci_iounmap(pdev, bar);
4173 return -ENOTTY;
4174 }
4175
4176 /* Set HINIC_VF_FLR_PROC_BIT for the start of FLR */
4177 val = ioread32be(bar + HINIC_VF_OP);
4178 val = val | HINIC_VF_FLR_PROC_BIT;
4179 iowrite32be(val, bar + HINIC_VF_OP);
4180
4181 pcie_flr(pdev);
4182
4183 /*
4184 * The device must recapture its Bus and Device Numbers after FLR
4185 * in order generate Completions. Issue a config write to let the
4186 * device capture this information.
4187 */
4188 pci_write_config_word(pdev, PCI_VENDOR_ID, 0);
4189
4190 /* Firmware clears HINIC_VF_FLR_PROC_BIT when reset is complete */
4191 timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
4192 do {
4193 val = ioread32be(bar + HINIC_VF_OP);
4194 if (!(val & HINIC_VF_FLR_PROC_BIT))
4195 goto reset_complete;
4196 msleep(20);
4197 } while (time_before(jiffies, timeout));
4198
4199 val = ioread32be(bar + HINIC_VF_OP);
4200 if (!(val & HINIC_VF_FLR_PROC_BIT))
4201 goto reset_complete;
4202
4203 pci_warn(pdev, "Reset dev timeout, FLR ack reg: %#010x\n", val);
4204
4205reset_complete:
4206 pci_iounmap(pdev, bar);
4207
4208 return 0;
4209}
4210
4211static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
4212 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
4213 reset_intel_82599_sfp_virtfn },
4214 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA,
4215 reset_ivb_igd },
4216 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA,
4217 reset_ivb_igd },
4218 { PCI_VENDOR_ID_SAMSUNG, 0xa804, nvme_disable_and_flr },
4219 { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
4220 { PCI_VENDOR_ID_INTEL, 0x0a54, delay_250ms_after_flr },
4221 { PCI_VENDOR_ID_SOLIDIGM, 0xf1ac, delay_250ms_after_flr },
4222 { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
4223 reset_chelsio_generic_dev },
4224 { PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
4225 reset_hinic_vf_dev },
4226 { 0 }
4227};
4228
4229/*
4230 * These device-specific reset methods are here rather than in a driver
4231 * because when a host assigns a device to a guest VM, the host may need
4232 * to reset the device but probably doesn't have a driver for it.
4233 */
4234int pci_dev_specific_reset(struct pci_dev *dev, bool probe)
4235{
4236 const struct pci_dev_reset_methods *i;
4237
4238 for (i = pci_dev_reset_methods; i->reset; i++) {
4239 if ((i->vendor == dev->vendor ||
4240 i->vendor == (u16)PCI_ANY_ID) &&
4241 (i->device == dev->device ||
4242 i->device == (u16)PCI_ANY_ID))
4243 return i->reset(dev, probe);
4244 }
4245
4246 return -ENOTTY;
4247}
4248
4249static void quirk_dma_func0_alias(struct pci_dev *dev)
4250{
4251 if (PCI_FUNC(dev->devfn) != 0)
4252 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0), 1);
4253}
4254
4255/*
4256 * https://bugzilla.redhat.com/show_bug.cgi?id=605888
4257 *
4258 * Some Ricoh devices use function 0 as the PCIe requester ID for DMA.
4259 */
4260DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias);
4261DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias);
4262
4263/* Some Glenfly chips use function 0 as the PCIe Requester ID for DMA */
4264DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GLENFLY, 0x3d40, quirk_dma_func0_alias);
4265DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GLENFLY, 0x3d41, quirk_dma_func0_alias);
4266
4267static void quirk_dma_func1_alias(struct pci_dev *dev)
4268{
4269 if (PCI_FUNC(dev->devfn) != 1)
4270 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1), 1);
4271}
4272
4273/*
4274 * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some
4275 * SKUs function 1 is present and is a legacy IDE controller, in other
4276 * SKUs this function is not present, making this a ghost requester.
4277 * https://bugzilla.kernel.org/show_bug.cgi?id=42679
4278 */
4279DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120,
4280 quirk_dma_func1_alias);
4281DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
4282 quirk_dma_func1_alias);
4283/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
4284DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
4285 quirk_dma_func1_alias);
4286DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
4287 quirk_dma_func1_alias);
4288/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
4289DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130,
4290 quirk_dma_func1_alias);
4291DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9170,
4292 quirk_dma_func1_alias);
4293/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */
4294DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172,
4295 quirk_dma_func1_alias);
4296/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */
4297DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a,
4298 quirk_dma_func1_alias);
4299/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */
4300DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182,
4301 quirk_dma_func1_alias);
4302/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c134 */
4303DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9183,
4304 quirk_dma_func1_alias);
4305/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
4306DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
4307 quirk_dma_func1_alias);
4308/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 */
4309DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9215,
4310 quirk_dma_func1_alias);
4311/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */
4312DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220,
4313 quirk_dma_func1_alias);
4314/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */
4315DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230,
4316 quirk_dma_func1_alias);
4317DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9235,
4318 quirk_dma_func1_alias);
4319DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642,
4320 quirk_dma_func1_alias);
4321DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0645,
4322 quirk_dma_func1_alias);
4323/* https://bugs.gentoo.org/show_bug.cgi?id=497630 */
4324DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON,
4325 PCI_DEVICE_ID_JMICRON_JMB388_ESD,
4326 quirk_dma_func1_alias);
4327/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c117 */
4328DECLARE_PCI_FIXUP_HEADER(0x1c28, /* Lite-On */
4329 0x0122, /* Plextor M6E (Marvell 88SS9183)*/
4330 quirk_dma_func1_alias);
4331
4332/*
4333 * Some devices DMA with the wrong devfn, not just the wrong function.
4334 * quirk_fixed_dma_alias() uses this table to create fixed aliases, where
4335 * the alias is "fixed" and independent of the device devfn.
4336 *
4337 * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O
4338 * processor. To software, this appears as a PCIe-to-PCI/X bridge with a
4339 * single device on the secondary bus. In reality, the single exposed
4340 * device at 0e.0 is the Address Translation Unit (ATU) of the controller
4341 * that provides a bridge to the internal bus of the I/O processor. The
4342 * controller supports private devices, which can be hidden from PCI config
4343 * space. In the case of the Adaptec 3405, a private device at 01.0
4344 * appears to be the DMA engine, which therefore needs to become a DMA
4345 * alias for the device.
4346 */
4347static const struct pci_device_id fixed_dma_alias_tbl[] = {
4348 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
4349 PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */
4350 .driver_data = PCI_DEVFN(1, 0) },
4351 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
4352 PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */
4353 .driver_data = PCI_DEVFN(1, 0) },
4354 { 0 }
4355};
4356
4357static void quirk_fixed_dma_alias(struct pci_dev *dev)
4358{
4359 const struct pci_device_id *id;
4360
4361 id = pci_match_id(fixed_dma_alias_tbl, dev);
4362 if (id)
4363 pci_add_dma_alias(dev, id->driver_data, 1);
4364}
4365DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias);
4366
4367/*
4368 * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in
4369 * using the wrong DMA alias for the device. Some of these devices can be
4370 * used as either forward or reverse bridges, so we need to test whether the
4371 * device is operating in the correct mode. We could probably apply this
4372 * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test
4373 * is for a non-root, non-PCIe bridge where the upstream device is PCIe and
4374 * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge.
4375 */
4376static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev)
4377{
4378 if (!pci_is_root_bus(pdev->bus) &&
4379 pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
4380 !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) &&
4381 pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE)
4382 pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS;
4383}
4384/* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */
4385DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080,
4386 quirk_use_pcie_bridge_dma_alias);
4387/* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */
4388DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias);
4389/* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */
4390DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias);
4391/* ITE 8893 has the same problem as the 8892 */
4392DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8893, quirk_use_pcie_bridge_dma_alias);
4393/* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */
4394DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
4395
4396/*
4397 * MIC x200 NTB forwards PCIe traffic using multiple alien RIDs. They have to
4398 * be added as aliases to the DMA device in order to allow buffer access
4399 * when IOMMU is enabled. Following devfns have to match RIT-LUT table
4400 * programmed in the EEPROM.
4401 */
4402static void quirk_mic_x200_dma_alias(struct pci_dev *pdev)
4403{
4404 pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0), 1);
4405 pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0), 1);
4406 pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3), 1);
4407}
4408DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias);
4409DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias);
4410
4411/*
4412 * Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices
4413 * exposing computational units via Non Transparent Bridges (NTB, PEX 87xx).
4414 *
4415 * Similarly to MIC x200, we need to add DMA aliases to allow buffer access
4416 * when IOMMU is enabled. These aliases allow computational unit access to
4417 * host memory. These aliases mark the whole VCA device as one IOMMU
4418 * group.
4419 *
4420 * All possible slot numbers (0x20) are used, since we are unable to tell
4421 * what slot is used on other side. This quirk is intended for both host
4422 * and computational unit sides. The VCA devices have up to five functions
4423 * (four for DMA channels and one additional).
4424 */
4425static void quirk_pex_vca_alias(struct pci_dev *pdev)
4426{
4427 const unsigned int num_pci_slots = 0x20;
4428 unsigned int slot;
4429
4430 for (slot = 0; slot < num_pci_slots; slot++)
4431 pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x0), 5);
4432}
4433DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2954, quirk_pex_vca_alias);
4434DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2955, quirk_pex_vca_alias);
4435DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2956, quirk_pex_vca_alias);
4436DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2958, quirk_pex_vca_alias);
4437DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2959, quirk_pex_vca_alias);
4438DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x295A, quirk_pex_vca_alias);
4439
4440/*
4441 * The IOMMU and interrupt controller on Broadcom Vulcan/Cavium ThunderX2 are
4442 * associated not at the root bus, but at a bridge below. This quirk avoids
4443 * generating invalid DMA aliases.
4444 */
4445static void quirk_bridge_cavm_thrx2_pcie_root(struct pci_dev *pdev)
4446{
4447 pdev->dev_flags |= PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT;
4448}
4449DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
4450 quirk_bridge_cavm_thrx2_pcie_root);
4451DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
4452 quirk_bridge_cavm_thrx2_pcie_root);
4453
4454/*
4455 * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
4456 * class code. Fix it.
4457 */
4458static void quirk_tw686x_class(struct pci_dev *pdev)
4459{
4460 u32 class = pdev->class;
4461
4462 /* Use "Multimedia controller" class */
4463 pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01;
4464 pci_info(pdev, "TW686x PCI class overridden (%#08x -> %#08x)\n",
4465 class, pdev->class);
4466}
4467DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8,
4468 quirk_tw686x_class);
4469DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8,
4470 quirk_tw686x_class);
4471DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8,
4472 quirk_tw686x_class);
4473DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8,
4474 quirk_tw686x_class);
4475
4476/*
4477 * Some devices have problems with Transaction Layer Packets with the Relaxed
4478 * Ordering Attribute set. Such devices should mark themselves and other
4479 * device drivers should check before sending TLPs with RO set.
4480 */
4481static void quirk_relaxedordering_disable(struct pci_dev *dev)
4482{
4483 dev->dev_flags |= PCI_DEV_FLAGS_NO_RELAXED_ORDERING;
4484 pci_info(dev, "Disable Relaxed Ordering Attributes to avoid PCIe Completion erratum\n");
4485}
4486
4487/*
4488 * Intel Xeon processors based on Broadwell/Haswell microarchitecture Root
4489 * Complex have a Flow Control Credit issue which can cause performance
4490 * problems with Upstream Transaction Layer Packets with Relaxed Ordering set.
4491 */
4492DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f01, PCI_CLASS_NOT_DEFINED, 8,
4493 quirk_relaxedordering_disable);
4494DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f02, PCI_CLASS_NOT_DEFINED, 8,
4495 quirk_relaxedordering_disable);
4496DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f03, PCI_CLASS_NOT_DEFINED, 8,
4497 quirk_relaxedordering_disable);
4498DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f04, PCI_CLASS_NOT_DEFINED, 8,
4499 quirk_relaxedordering_disable);
4500DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f05, PCI_CLASS_NOT_DEFINED, 8,
4501 quirk_relaxedordering_disable);
4502DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f06, PCI_CLASS_NOT_DEFINED, 8,
4503 quirk_relaxedordering_disable);
4504DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f07, PCI_CLASS_NOT_DEFINED, 8,
4505 quirk_relaxedordering_disable);
4506DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f08, PCI_CLASS_NOT_DEFINED, 8,
4507 quirk_relaxedordering_disable);
4508DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f09, PCI_CLASS_NOT_DEFINED, 8,
4509 quirk_relaxedordering_disable);
4510DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0a, PCI_CLASS_NOT_DEFINED, 8,
4511 quirk_relaxedordering_disable);
4512DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0b, PCI_CLASS_NOT_DEFINED, 8,
4513 quirk_relaxedordering_disable);
4514DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0c, PCI_CLASS_NOT_DEFINED, 8,
4515 quirk_relaxedordering_disable);
4516DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0d, PCI_CLASS_NOT_DEFINED, 8,
4517 quirk_relaxedordering_disable);
4518DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0e, PCI_CLASS_NOT_DEFINED, 8,
4519 quirk_relaxedordering_disable);
4520DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f01, PCI_CLASS_NOT_DEFINED, 8,
4521 quirk_relaxedordering_disable);
4522DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f02, PCI_CLASS_NOT_DEFINED, 8,
4523 quirk_relaxedordering_disable);
4524DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f03, PCI_CLASS_NOT_DEFINED, 8,
4525 quirk_relaxedordering_disable);
4526DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f04, PCI_CLASS_NOT_DEFINED, 8,
4527 quirk_relaxedordering_disable);
4528DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f05, PCI_CLASS_NOT_DEFINED, 8,
4529 quirk_relaxedordering_disable);
4530DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f06, PCI_CLASS_NOT_DEFINED, 8,
4531 quirk_relaxedordering_disable);
4532DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f07, PCI_CLASS_NOT_DEFINED, 8,
4533 quirk_relaxedordering_disable);
4534DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f08, PCI_CLASS_NOT_DEFINED, 8,
4535 quirk_relaxedordering_disable);
4536DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f09, PCI_CLASS_NOT_DEFINED, 8,
4537 quirk_relaxedordering_disable);
4538DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0a, PCI_CLASS_NOT_DEFINED, 8,
4539 quirk_relaxedordering_disable);
4540DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0b, PCI_CLASS_NOT_DEFINED, 8,
4541 quirk_relaxedordering_disable);
4542DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0c, PCI_CLASS_NOT_DEFINED, 8,
4543 quirk_relaxedordering_disable);
4544DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0d, PCI_CLASS_NOT_DEFINED, 8,
4545 quirk_relaxedordering_disable);
4546DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0e, PCI_CLASS_NOT_DEFINED, 8,
4547 quirk_relaxedordering_disable);
4548
4549/*
4550 * The AMD ARM A1100 (aka "SEATTLE") SoC has a bug in its PCIe Root Complex
4551 * where Upstream Transaction Layer Packets with the Relaxed Ordering
4552 * Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering
4553 * set. This is a violation of the PCIe 3.0 Transaction Ordering Rules
4554 * outlined in Section 2.4.1 (PCI Express(r) Base Specification Revision 3.0
4555 * November 10, 2010). As a result, on this platform we can't use Relaxed
4556 * Ordering for Upstream TLPs.
4557 */
4558DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a00, PCI_CLASS_NOT_DEFINED, 8,
4559 quirk_relaxedordering_disable);
4560DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a01, PCI_CLASS_NOT_DEFINED, 8,
4561 quirk_relaxedordering_disable);
4562DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a02, PCI_CLASS_NOT_DEFINED, 8,
4563 quirk_relaxedordering_disable);
4564
4565/*
4566 * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same
4567 * values for the Attribute as were supplied in the header of the
4568 * corresponding Request, except as explicitly allowed when IDO is used."
4569 *
4570 * If a non-compliant device generates a completion with a different
4571 * attribute than the request, the receiver may accept it (which itself
4572 * seems non-compliant based on sec 2.3.2), or it may handle it as a
4573 * Malformed TLP or an Unexpected Completion, which will probably lead to a
4574 * device access timeout.
4575 *
4576 * If the non-compliant device generates completions with zero attributes
4577 * (instead of copying the attributes from the request), we can work around
4578 * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in
4579 * upstream devices so they always generate requests with zero attributes.
4580 *
4581 * This affects other devices under the same Root Port, but since these
4582 * attributes are performance hints, there should be no functional problem.
4583 *
4584 * Note that Configuration Space accesses are never supposed to have TLP
4585 * Attributes, so we're safe waiting till after any Configuration Space
4586 * accesses to do the Root Port fixup.
4587 */
4588static void quirk_disable_root_port_attributes(struct pci_dev *pdev)
4589{
4590 struct pci_dev *root_port = pcie_find_root_port(pdev);
4591
4592 if (!root_port) {
4593 pci_warn(pdev, "PCIe Completion erratum may cause device errors\n");
4594 return;
4595 }
4596
4597 pci_info(root_port, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n",
4598 dev_name(&pdev->dev));
4599 pcie_capability_clear_word(root_port, PCI_EXP_DEVCTL,
4600 PCI_EXP_DEVCTL_RELAX_EN |
4601 PCI_EXP_DEVCTL_NOSNOOP_EN);
4602}
4603
4604/*
4605 * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the
4606 * Completion it generates.
4607 */
4608static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev)
4609{
4610 /*
4611 * This mask/compare operation selects for Physical Function 4 on a
4612 * T5. We only need to fix up the Root Port once for any of the
4613 * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely
4614 * 0x54xx so we use that one.
4615 */
4616 if ((pdev->device & 0xff00) == 0x5400)
4617 quirk_disable_root_port_attributes(pdev);
4618}
4619DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
4620 quirk_chelsio_T5_disable_root_port_attributes);
4621
4622/*
4623 * pci_acs_ctrl_enabled - compare desired ACS controls with those provided
4624 * by a device
4625 * @acs_ctrl_req: Bitmask of desired ACS controls
4626 * @acs_ctrl_ena: Bitmask of ACS controls enabled or provided implicitly by
4627 * the hardware design
4628 *
4629 * Return 1 if all ACS controls in the @acs_ctrl_req bitmask are included
4630 * in @acs_ctrl_ena, i.e., the device provides all the access controls the
4631 * caller desires. Return 0 otherwise.
4632 */
4633static int pci_acs_ctrl_enabled(u16 acs_ctrl_req, u16 acs_ctrl_ena)
4634{
4635 if ((acs_ctrl_req & acs_ctrl_ena) == acs_ctrl_req)
4636 return 1;
4637 return 0;
4638}
4639
4640/*
4641 * AMD has indicated that the devices below do not support peer-to-peer
4642 * in any system where they are found in the southbridge with an AMD
4643 * IOMMU in the system. Multifunction devices that do not support
4644 * peer-to-peer between functions can claim to support a subset of ACS.
4645 * Such devices effectively enable request redirect (RR) and completion
4646 * redirect (CR) since all transactions are redirected to the upstream
4647 * root complex.
4648 *
4649 * https://lore.kernel.org/r/201207111426.q6BEQTbh002928@mail.maya.org/
4650 * https://lore.kernel.org/r/20120711165854.GM25282@amd.com/
4651 * https://lore.kernel.org/r/20121005130857.GX4009@amd.com/
4652 *
4653 * 1002:4385 SBx00 SMBus Controller
4654 * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller
4655 * 1002:4383 SBx00 Azalia (Intel HDA)
4656 * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller
4657 * 1002:4384 SBx00 PCI to PCI Bridge
4658 * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
4659 *
4660 * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15
4661 *
4662 * 1022:780f [AMD] FCH PCI Bridge
4663 * 1022:7809 [AMD] FCH USB OHCI Controller
4664 */
4665static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags)
4666{
4667#ifdef CONFIG_ACPI
4668 struct acpi_table_header *header = NULL;
4669 acpi_status status;
4670
4671 /* Targeting multifunction devices on the SB (appears on root bus) */
4672 if (!dev->multifunction || !pci_is_root_bus(dev->bus))
4673 return -ENODEV;
4674
4675 /* The IVRS table describes the AMD IOMMU */
4676 status = acpi_get_table("IVRS", 0, &header);
4677 if (ACPI_FAILURE(status))
4678 return -ENODEV;
4679
4680 acpi_put_table(header);
4681
4682 /* Filter out flags not applicable to multifunction */
4683 acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT);
4684
4685 return pci_acs_ctrl_enabled(acs_flags, PCI_ACS_RR | PCI_ACS_CR);
4686#else
4687 return -ENODEV;
4688#endif
4689}
4690
4691static bool pci_quirk_cavium_acs_match(struct pci_dev *dev)
4692{
4693 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
4694 return false;
4695
4696 switch (dev->device) {
4697 /*
4698 * Effectively selects all downstream ports for whole ThunderX1
4699 * (which represents 8 SoCs).
4700 */
4701 case 0xa000 ... 0xa7ff: /* ThunderX1 */
4702 case 0xaf84: /* ThunderX2 */
4703 case 0xb884: /* ThunderX3 */
4704 return true;
4705 default:
4706 return false;
4707 }
4708}
4709
4710static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags)
4711{
4712 if (!pci_quirk_cavium_acs_match(dev))
4713 return -ENOTTY;
4714
4715 /*
4716 * Cavium Root Ports don't advertise an ACS capability. However,
4717 * the RTL internally implements similar protection as if ACS had
4718 * Source Validation, Request Redirection, Completion Redirection,
4719 * and Upstream Forwarding features enabled. Assert that the
4720 * hardware implements and enables equivalent ACS functionality for
4721 * these flags.
4722 */
4723 return pci_acs_ctrl_enabled(acs_flags,
4724 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4725}
4726
4727static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags)
4728{
4729 /*
4730 * X-Gene Root Ports matching this quirk do not allow peer-to-peer
4731 * transactions with others, allowing masking out these bits as if they
4732 * were unimplemented in the ACS capability.
4733 */
4734 return pci_acs_ctrl_enabled(acs_flags,
4735 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4736}
4737
4738/*
4739 * Many Zhaoxin Root Ports and Switch Downstream Ports have no ACS capability.
4740 * But the implementation could block peer-to-peer transactions between them
4741 * and provide ACS-like functionality.
4742 */
4743static int pci_quirk_zhaoxin_pcie_ports_acs(struct pci_dev *dev, u16 acs_flags)
4744{
4745 if (!pci_is_pcie(dev) ||
4746 ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
4747 (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
4748 return -ENOTTY;
4749
4750 /*
4751 * Future Zhaoxin Root Ports and Switch Downstream Ports will
4752 * implement ACS capability in accordance with the PCIe Spec.
4753 */
4754 switch (dev->device) {
4755 case 0x0710 ... 0x071e:
4756 case 0x0721:
4757 case 0x0723 ... 0x0752:
4758 return pci_acs_ctrl_enabled(acs_flags,
4759 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4760 }
4761
4762 return false;
4763}
4764
4765/*
4766 * Many Intel PCH Root Ports do provide ACS-like features to disable peer
4767 * transactions and validate bus numbers in requests, but do not provide an
4768 * actual PCIe ACS capability. This is the list of device IDs known to fall
4769 * into that category as provided by Intel in Red Hat bugzilla 1037684.
4770 */
4771static const u16 pci_quirk_intel_pch_acs_ids[] = {
4772 /* Ibexpeak PCH */
4773 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49,
4774 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51,
4775 /* Cougarpoint PCH */
4776 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17,
4777 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f,
4778 /* Pantherpoint PCH */
4779 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17,
4780 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f,
4781 /* Lynxpoint-H PCH */
4782 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17,
4783 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f,
4784 /* Lynxpoint-LP PCH */
4785 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17,
4786 0x9c18, 0x9c19, 0x9c1a, 0x9c1b,
4787 /* Wildcat PCH */
4788 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97,
4789 0x9c98, 0x9c99, 0x9c9a, 0x9c9b,
4790 /* Patsburg (X79) PCH */
4791 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e,
4792 /* Wellsburg (X99) PCH */
4793 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17,
4794 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e,
4795 /* Lynx Point (9 series) PCH */
4796 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e,
4797};
4798
4799static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev)
4800{
4801 int i;
4802
4803 /* Filter out a few obvious non-matches first */
4804 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
4805 return false;
4806
4807 for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++)
4808 if (pci_quirk_intel_pch_acs_ids[i] == dev->device)
4809 return true;
4810
4811 return false;
4812}
4813
4814static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags)
4815{
4816 if (!pci_quirk_intel_pch_acs_match(dev))
4817 return -ENOTTY;
4818
4819 if (dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK)
4820 return pci_acs_ctrl_enabled(acs_flags,
4821 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4822
4823 return pci_acs_ctrl_enabled(acs_flags, 0);
4824}
4825
4826/*
4827 * These QCOM Root Ports do provide ACS-like features to disable peer
4828 * transactions and validate bus numbers in requests, but do not provide an
4829 * actual PCIe ACS capability. Hardware supports source validation but it
4830 * will report the issue as Completer Abort instead of ACS Violation.
4831 * Hardware doesn't support peer-to-peer and each Root Port is a Root
4832 * Complex with unique segment numbers. It is not possible for one Root
4833 * Port to pass traffic to another Root Port. All PCIe transactions are
4834 * terminated inside the Root Port.
4835 */
4836static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
4837{
4838 return pci_acs_ctrl_enabled(acs_flags,
4839 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4840}
4841
4842/*
4843 * Each of these NXP Root Ports is in a Root Complex with a unique segment
4844 * number and does provide isolation features to disable peer transactions
4845 * and validate bus numbers in requests, but does not provide an ACS
4846 * capability.
4847 */
4848static int pci_quirk_nxp_rp_acs(struct pci_dev *dev, u16 acs_flags)
4849{
4850 return pci_acs_ctrl_enabled(acs_flags,
4851 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4852}
4853
4854static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags)
4855{
4856 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
4857 return -ENOTTY;
4858
4859 /*
4860 * Amazon's Annapurna Labs root ports don't include an ACS capability,
4861 * but do include ACS-like functionality. The hardware doesn't support
4862 * peer-to-peer transactions via the root port and each has a unique
4863 * segment number.
4864 *
4865 * Additionally, the root ports cannot send traffic to each other.
4866 */
4867 acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4868
4869 return acs_flags ? 0 : 1;
4870}
4871
4872/*
4873 * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in
4874 * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2,
4875 * 12.1.46, 12.1.47)[1] this chipset uses dwords for the ACS capability and
4876 * control registers whereas the PCIe spec packs them into words (Rev 3.0,
4877 * 7.16 ACS Extended Capability). The bit definitions are correct, but the
4878 * control register is at offset 8 instead of 6 and we should probably use
4879 * dword accesses to them. This applies to the following PCI Device IDs, as
4880 * found in volume 1 of the datasheet[2]:
4881 *
4882 * 0xa110-0xa11f Sunrise Point-H PCI Express Root Port #{0-16}
4883 * 0xa167-0xa16a Sunrise Point-H PCI Express Root Port #{17-20}
4884 *
4885 * N.B. This doesn't fix what lspci shows.
4886 *
4887 * The 100 series chipset specification update includes this as errata #23[3].
4888 *
4889 * The 200 series chipset (Union Point) has the same bug according to the
4890 * specification update (Intel 200 Series Chipset Family Platform Controller
4891 * Hub, Specification Update, January 2017, Revision 001, Document# 335194-001,
4892 * Errata 22)[4]. Per the datasheet[5], root port PCI Device IDs for this
4893 * chipset include:
4894 *
4895 * 0xa290-0xa29f PCI Express Root port #{0-16}
4896 * 0xa2e7-0xa2ee PCI Express Root port #{17-24}
4897 *
4898 * Mobile chipsets are also affected, 7th & 8th Generation
4899 * Specification update confirms ACS errata 22, status no fix: (7th Generation
4900 * Intel Processor Family I/O for U/Y Platforms and 8th Generation Intel
4901 * Processor Family I/O for U Quad Core Platforms Specification Update,
4902 * August 2017, Revision 002, Document#: 334660-002)[6]
4903 * Device IDs from I/O datasheet: (7th Generation Intel Processor Family I/O
4904 * for U/Y Platforms and 8th Generation Intel ® Processor Family I/O for U
4905 * Quad Core Platforms, Vol 1 of 2, August 2017, Document#: 334658-003)[7]
4906 *
4907 * 0x9d10-0x9d1b PCI Express Root port #{1-12}
4908 *
4909 * [1] https://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html
4910 * [2] https://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html
4911 * [3] https://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html
4912 * [4] https://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-spec-update.html
4913 * [5] https://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-datasheet-vol-1.html
4914 * [6] https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-u-y-processor-lines-i-o-spec-update.html
4915 * [7] https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.html
4916 */
4917static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev)
4918{
4919 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
4920 return false;
4921
4922 switch (dev->device) {
4923 case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */
4924 case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */
4925 case 0x9d10 ... 0x9d1b: /* 7th & 8th Gen Mobile */
4926 return true;
4927 }
4928
4929 return false;
4930}
4931
4932#define INTEL_SPT_ACS_CTRL (PCI_ACS_CAP + 4)
4933
4934static int pci_quirk_intel_spt_pch_acs(struct pci_dev *dev, u16 acs_flags)
4935{
4936 int pos;
4937 u32 cap, ctrl;
4938
4939 if (!pci_quirk_intel_spt_pch_acs_match(dev))
4940 return -ENOTTY;
4941
4942 pos = dev->acs_cap;
4943 if (!pos)
4944 return -ENOTTY;
4945
4946 /* see pci_acs_flags_enabled() */
4947 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap);
4948 acs_flags &= (cap | PCI_ACS_EC);
4949
4950 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
4951
4952 return pci_acs_ctrl_enabled(acs_flags, ctrl);
4953}
4954
4955static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
4956{
4957 /*
4958 * SV, TB, and UF are not relevant to multifunction endpoints.
4959 *
4960 * Multifunction devices are only required to implement RR, CR, and DT
4961 * in their ACS capability if they support peer-to-peer transactions.
4962 * Devices matching this quirk have been verified by the vendor to not
4963 * perform peer-to-peer with other functions, allowing us to mask out
4964 * these bits as if they were unimplemented in the ACS capability.
4965 */
4966 return pci_acs_ctrl_enabled(acs_flags,
4967 PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
4968 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
4969}
4970
4971static int pci_quirk_rciep_acs(struct pci_dev *dev, u16 acs_flags)
4972{
4973 /*
4974 * Intel RCiEP's are required to allow p2p only on translated
4975 * addresses. Refer to Intel VT-d specification, r3.1, sec 3.16,
4976 * "Root-Complex Peer to Peer Considerations".
4977 */
4978 if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END)
4979 return -ENOTTY;
4980
4981 return pci_acs_ctrl_enabled(acs_flags,
4982 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4983}
4984
4985static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags)
4986{
4987 /*
4988 * iProc PAXB Root Ports don't advertise an ACS capability, but
4989 * they do not allow peer-to-peer transactions between Root Ports.
4990 * Allow each Root Port to be in a separate IOMMU group by masking
4991 * SV/RR/CR/UF bits.
4992 */
4993 return pci_acs_ctrl_enabled(acs_flags,
4994 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
4995}
4996
4997/*
4998 * Wangxun 40G/25G/10G/1G NICs have no ACS capability, but on
4999 * multi-function devices, the hardware isolates the functions by
5000 * directing all peer-to-peer traffic upstream as though PCI_ACS_RR and
5001 * PCI_ACS_CR were set.
5002 * SFxxx 1G NICs(em).
5003 * RP1000/RP2000 10G NICs(sp).
5004 * FF5xxx 40G/25G/10G NICs(aml).
5005 */
5006static int pci_quirk_wangxun_nic_acs(struct pci_dev *dev, u16 acs_flags)
5007{
5008 switch (dev->device) {
5009 case 0x0100 ... 0x010F: /* EM */
5010 case 0x1001: case 0x2001: /* SP */
5011 case 0x5010: case 0x5025: case 0x5040: /* AML */
5012 case 0x5110: case 0x5125: case 0x5140: /* AML */
5013 return pci_acs_ctrl_enabled(acs_flags,
5014 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
5015 }
5016
5017 return false;
5018}
5019
5020static const struct pci_dev_acs_enabled {
5021 u16 vendor;
5022 u16 device;
5023 int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags);
5024} pci_dev_acs_enabled[] = {
5025 { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs },
5026 { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs },
5027 { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs },
5028 { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs },
5029 { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs },
5030 { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs },
5031 { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs },
5032 { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs },
5033 { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs },
5034 { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs },
5035 { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs },
5036 { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs },
5037 { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs },
5038 { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs },
5039 { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs },
5040 { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs },
5041 { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs },
5042 { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs },
5043 { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs },
5044 { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs },
5045 { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs },
5046 { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs },
5047 { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs },
5048 { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs },
5049 { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs },
5050 { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs },
5051 { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs },
5052 { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs },
5053 { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs },
5054 { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs },
5055 { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs },
5056 /* 82580 */
5057 { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs },
5058 { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs },
5059 { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs },
5060 { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs },
5061 { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs },
5062 { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs },
5063 { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs },
5064 /* 82576 */
5065 { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs },
5066 { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs },
5067 { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs },
5068 { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs },
5069 { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs },
5070 { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs },
5071 { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs },
5072 { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs },
5073 /* 82575 */
5074 { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs },
5075 { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs },
5076 { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs },
5077 /* I350 */
5078 { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs },
5079 { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs },
5080 { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs },
5081 { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs },
5082 /* 82571 (Quads omitted due to non-ACS switch) */
5083 { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs },
5084 { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs },
5085 { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs },
5086 { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs },
5087 /* I219 */
5088 { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs },
5089 { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs },
5090 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_rciep_acs },
5091 /* QCOM QDF2xxx root ports */
5092 { PCI_VENDOR_ID_QCOM, 0x0400, pci_quirk_qcom_rp_acs },
5093 { PCI_VENDOR_ID_QCOM, 0x0401, pci_quirk_qcom_rp_acs },
5094 /* QCOM SA8775P root port */
5095 { PCI_VENDOR_ID_QCOM, 0x0115, pci_quirk_qcom_rp_acs },
5096 /* HXT SD4800 root ports. The ACS design is same as QCOM QDF2xxx */
5097 { PCI_VENDOR_ID_HXT, 0x0401, pci_quirk_qcom_rp_acs },
5098 /* Intel PCH root ports */
5099 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
5100 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs },
5101 { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */
5102 { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
5103 /* Cavium ThunderX */
5104 { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
5105 /* Cavium multi-function devices */
5106 { PCI_VENDOR_ID_CAVIUM, 0xA026, pci_quirk_mf_endpoint_acs },
5107 { PCI_VENDOR_ID_CAVIUM, 0xA059, pci_quirk_mf_endpoint_acs },
5108 { PCI_VENDOR_ID_CAVIUM, 0xA060, pci_quirk_mf_endpoint_acs },
5109 /* APM X-Gene */
5110 { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs },
5111 /* Ampere Computing */
5112 { PCI_VENDOR_ID_AMPERE, 0xE005, pci_quirk_xgene_acs },
5113 { PCI_VENDOR_ID_AMPERE, 0xE006, pci_quirk_xgene_acs },
5114 { PCI_VENDOR_ID_AMPERE, 0xE007, pci_quirk_xgene_acs },
5115 { PCI_VENDOR_ID_AMPERE, 0xE008, pci_quirk_xgene_acs },
5116 { PCI_VENDOR_ID_AMPERE, 0xE009, pci_quirk_xgene_acs },
5117 { PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs },
5118 { PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs },
5119 { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs },
5120 /* Broadcom multi-function device */
5121 { PCI_VENDOR_ID_BROADCOM, 0x16D7, pci_quirk_mf_endpoint_acs },
5122 { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs },
5123 { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs },
5124 { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs },
5125 { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs },
5126 { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs },
5127 { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs },
5128 { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs },
5129 { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
5130 /* Amazon Annapurna Labs */
5131 { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
5132 /* Zhaoxin multi-function devices */
5133 { PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs },
5134 { PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs },
5135 { PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs },
5136 /* NXP root ports, xx=16, 12, or 08 cores */
5137 /* LX2xx0A : without security features + CAN-FD */
5138 { PCI_VENDOR_ID_NXP, 0x8d81, pci_quirk_nxp_rp_acs },
5139 { PCI_VENDOR_ID_NXP, 0x8da1, pci_quirk_nxp_rp_acs },
5140 { PCI_VENDOR_ID_NXP, 0x8d83, pci_quirk_nxp_rp_acs },
5141 /* LX2xx0C : security features + CAN-FD */
5142 { PCI_VENDOR_ID_NXP, 0x8d80, pci_quirk_nxp_rp_acs },
5143 { PCI_VENDOR_ID_NXP, 0x8da0, pci_quirk_nxp_rp_acs },
5144 { PCI_VENDOR_ID_NXP, 0x8d82, pci_quirk_nxp_rp_acs },
5145 /* LX2xx0E : security features + CAN */
5146 { PCI_VENDOR_ID_NXP, 0x8d90, pci_quirk_nxp_rp_acs },
5147 { PCI_VENDOR_ID_NXP, 0x8db0, pci_quirk_nxp_rp_acs },
5148 { PCI_VENDOR_ID_NXP, 0x8d92, pci_quirk_nxp_rp_acs },
5149 /* LX2xx0N : without security features + CAN */
5150 { PCI_VENDOR_ID_NXP, 0x8d91, pci_quirk_nxp_rp_acs },
5151 { PCI_VENDOR_ID_NXP, 0x8db1, pci_quirk_nxp_rp_acs },
5152 { PCI_VENDOR_ID_NXP, 0x8d93, pci_quirk_nxp_rp_acs },
5153 /* LX2xx2A : without security features + CAN-FD */
5154 { PCI_VENDOR_ID_NXP, 0x8d89, pci_quirk_nxp_rp_acs },
5155 { PCI_VENDOR_ID_NXP, 0x8da9, pci_quirk_nxp_rp_acs },
5156 { PCI_VENDOR_ID_NXP, 0x8d8b, pci_quirk_nxp_rp_acs },
5157 /* LX2xx2C : security features + CAN-FD */
5158 { PCI_VENDOR_ID_NXP, 0x8d88, pci_quirk_nxp_rp_acs },
5159 { PCI_VENDOR_ID_NXP, 0x8da8, pci_quirk_nxp_rp_acs },
5160 { PCI_VENDOR_ID_NXP, 0x8d8a, pci_quirk_nxp_rp_acs },
5161 /* LX2xx2E : security features + CAN */
5162 { PCI_VENDOR_ID_NXP, 0x8d98, pci_quirk_nxp_rp_acs },
5163 { PCI_VENDOR_ID_NXP, 0x8db8, pci_quirk_nxp_rp_acs },
5164 { PCI_VENDOR_ID_NXP, 0x8d9a, pci_quirk_nxp_rp_acs },
5165 /* LX2xx2N : without security features + CAN */
5166 { PCI_VENDOR_ID_NXP, 0x8d99, pci_quirk_nxp_rp_acs },
5167 { PCI_VENDOR_ID_NXP, 0x8db9, pci_quirk_nxp_rp_acs },
5168 { PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs },
5169 /* Zhaoxin Root/Downstream Ports */
5170 { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
5171 /* Wangxun nics */
5172 { PCI_VENDOR_ID_WANGXUN, PCI_ANY_ID, pci_quirk_wangxun_nic_acs },
5173 { 0 }
5174};
5175
5176/*
5177 * pci_dev_specific_acs_enabled - check whether device provides ACS controls
5178 * @dev: PCI device
5179 * @acs_flags: Bitmask of desired ACS controls
5180 *
5181 * Returns:
5182 * -ENOTTY: No quirk applies to this device; we can't tell whether the
5183 * device provides the desired controls
5184 * 0: Device does not provide all the desired controls
5185 * >0: Device provides all the controls in @acs_flags
5186 */
5187int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags)
5188{
5189 const struct pci_dev_acs_enabled *i;
5190 int ret;
5191
5192 /*
5193 * Allow devices that do not expose standard PCIe ACS capabilities
5194 * or control to indicate their support here. Multi-function express
5195 * devices which do not allow internal peer-to-peer between functions,
5196 * but do not implement PCIe ACS may wish to return true here.
5197 */
5198 for (i = pci_dev_acs_enabled; i->acs_enabled; i++) {
5199 if ((i->vendor == dev->vendor ||
5200 i->vendor == (u16)PCI_ANY_ID) &&
5201 (i->device == dev->device ||
5202 i->device == (u16)PCI_ANY_ID)) {
5203 ret = i->acs_enabled(dev, acs_flags);
5204 if (ret >= 0)
5205 return ret;
5206 }
5207 }
5208
5209 return -ENOTTY;
5210}
5211
5212/* Config space offset of Root Complex Base Address register */
5213#define INTEL_LPC_RCBA_REG 0xf0
5214/* 31:14 RCBA address */
5215#define INTEL_LPC_RCBA_MASK 0xffffc000
5216/* RCBA Enable */
5217#define INTEL_LPC_RCBA_ENABLE (1 << 0)
5218
5219/* Backbone Scratch Pad Register */
5220#define INTEL_BSPR_REG 0x1104
5221/* Backbone Peer Non-Posted Disable */
5222#define INTEL_BSPR_REG_BPNPD (1 << 8)
5223/* Backbone Peer Posted Disable */
5224#define INTEL_BSPR_REG_BPPD (1 << 9)
5225
5226/* Upstream Peer Decode Configuration Register */
5227#define INTEL_UPDCR_REG 0x1014
5228/* 5:0 Peer Decode Enable bits */
5229#define INTEL_UPDCR_REG_MASK 0x3f
5230
5231static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev)
5232{
5233 u32 rcba, bspr, updcr;
5234 void __iomem *rcba_mem;
5235
5236 /*
5237 * Read the RCBA register from the LPC (D31:F0). PCH root ports
5238 * are D28:F* and therefore get probed before LPC, thus we can't
5239 * use pci_get_slot()/pci_read_config_dword() here.
5240 */
5241 pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0),
5242 INTEL_LPC_RCBA_REG, &rcba);
5243 if (!(rcba & INTEL_LPC_RCBA_ENABLE))
5244 return -EINVAL;
5245
5246 rcba_mem = ioremap(rcba & INTEL_LPC_RCBA_MASK,
5247 PAGE_ALIGN(INTEL_UPDCR_REG));
5248 if (!rcba_mem)
5249 return -ENOMEM;
5250
5251 /*
5252 * The BSPR can disallow peer cycles, but it's set by soft strap and
5253 * therefore read-only. If both posted and non-posted peer cycles are
5254 * disallowed, we're ok. If either are allowed, then we need to use
5255 * the UPDCR to disable peer decodes for each port. This provides the
5256 * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF
5257 */
5258 bspr = readl(rcba_mem + INTEL_BSPR_REG);
5259 bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD;
5260 if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) {
5261 updcr = readl(rcba_mem + INTEL_UPDCR_REG);
5262 if (updcr & INTEL_UPDCR_REG_MASK) {
5263 pci_info(dev, "Disabling UPDCR peer decodes\n");
5264 updcr &= ~INTEL_UPDCR_REG_MASK;
5265 writel(updcr, rcba_mem + INTEL_UPDCR_REG);
5266 }
5267 }
5268
5269 iounmap(rcba_mem);
5270 return 0;
5271}
5272
5273/* Miscellaneous Port Configuration register */
5274#define INTEL_MPC_REG 0xd8
5275/* MPC: Invalid Receive Bus Number Check Enable */
5276#define INTEL_MPC_REG_IRBNCE (1 << 26)
5277
5278static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev)
5279{
5280 u32 mpc;
5281
5282 /*
5283 * When enabled, the IRBNCE bit of the MPC register enables the
5284 * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which
5285 * ensures that requester IDs fall within the bus number range
5286 * of the bridge. Enable if not already.
5287 */
5288 pci_read_config_dword(dev, INTEL_MPC_REG, &mpc);
5289 if (!(mpc & INTEL_MPC_REG_IRBNCE)) {
5290 pci_info(dev, "Enabling MPC IRBNCE\n");
5291 mpc |= INTEL_MPC_REG_IRBNCE;
5292 pci_write_config_word(dev, INTEL_MPC_REG, mpc);
5293 }
5294}
5295
5296/*
5297 * Currently this quirk does the equivalent of
5298 * PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF
5299 *
5300 * TODO: This quirk also needs to do equivalent of PCI_ACS_TB,
5301 * if dev->external_facing || dev->untrusted
5302 */
5303static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev)
5304{
5305 if (!pci_quirk_intel_pch_acs_match(dev))
5306 return -ENOTTY;
5307
5308 if (pci_quirk_enable_intel_lpc_acs(dev)) {
5309 pci_warn(dev, "Failed to enable Intel PCH ACS quirk\n");
5310 return 0;
5311 }
5312
5313 pci_quirk_enable_intel_rp_mpc_acs(dev);
5314
5315 dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK;
5316
5317 pci_info(dev, "Intel PCH root port ACS workaround enabled\n");
5318
5319 return 0;
5320}
5321
5322static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev)
5323{
5324 int pos;
5325 u32 cap, ctrl;
5326
5327 if (!pci_quirk_intel_spt_pch_acs_match(dev))
5328 return -ENOTTY;
5329
5330 pos = dev->acs_cap;
5331 if (!pos)
5332 return -ENOTTY;
5333
5334 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap);
5335 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
5336
5337 ctrl |= (cap & PCI_ACS_SV);
5338 ctrl |= (cap & PCI_ACS_RR);
5339 ctrl |= (cap & PCI_ACS_CR);
5340 ctrl |= (cap & PCI_ACS_UF);
5341
5342 if (pci_ats_disabled() || dev->external_facing || dev->untrusted)
5343 ctrl |= (cap & PCI_ACS_TB);
5344
5345 pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl);
5346
5347 pci_info(dev, "Intel SPT PCH root port ACS workaround enabled\n");
5348
5349 return 0;
5350}
5351
5352static int pci_quirk_disable_intel_spt_pch_acs_redir(struct pci_dev *dev)
5353{
5354 int pos;
5355 u32 cap, ctrl;
5356
5357 if (!pci_quirk_intel_spt_pch_acs_match(dev))
5358 return -ENOTTY;
5359
5360 pos = dev->acs_cap;
5361 if (!pos)
5362 return -ENOTTY;
5363
5364 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap);
5365 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
5366
5367 ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC);
5368
5369 pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl);
5370
5371 pci_info(dev, "Intel SPT PCH root port workaround: disabled ACS redirect\n");
5372
5373 return 0;
5374}
5375
5376static const struct pci_dev_acs_ops {
5377 u16 vendor;
5378 u16 device;
5379 int (*enable_acs)(struct pci_dev *dev);
5380 int (*disable_acs_redir)(struct pci_dev *dev);
5381} pci_dev_acs_ops[] = {
5382 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
5383 .enable_acs = pci_quirk_enable_intel_pch_acs,
5384 },
5385 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
5386 .enable_acs = pci_quirk_enable_intel_spt_pch_acs,
5387 .disable_acs_redir = pci_quirk_disable_intel_spt_pch_acs_redir,
5388 },
5389};
5390
5391int pci_dev_specific_enable_acs(struct pci_dev *dev)
5392{
5393 const struct pci_dev_acs_ops *p;
5394 int i, ret;
5395
5396 for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) {
5397 p = &pci_dev_acs_ops[i];
5398 if ((p->vendor == dev->vendor ||
5399 p->vendor == (u16)PCI_ANY_ID) &&
5400 (p->device == dev->device ||
5401 p->device == (u16)PCI_ANY_ID) &&
5402 p->enable_acs) {
5403 ret = p->enable_acs(dev);
5404 if (ret >= 0)
5405 return ret;
5406 }
5407 }
5408
5409 return -ENOTTY;
5410}
5411
5412int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
5413{
5414 const struct pci_dev_acs_ops *p;
5415 int i, ret;
5416
5417 for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) {
5418 p = &pci_dev_acs_ops[i];
5419 if ((p->vendor == dev->vendor ||
5420 p->vendor == (u16)PCI_ANY_ID) &&
5421 (p->device == dev->device ||
5422 p->device == (u16)PCI_ANY_ID) &&
5423 p->disable_acs_redir) {
5424 ret = p->disable_acs_redir(dev);
5425 if (ret >= 0)
5426 return ret;
5427 }
5428 }
5429
5430 return -ENOTTY;
5431}
5432
5433/*
5434 * The PCI capabilities list for Intel DH895xCC VFs (device ID 0x0443) with
5435 * QuickAssist Technology (QAT) is prematurely terminated in hardware. The
5436 * Next Capability pointer in the MSI Capability Structure should point to
5437 * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating
5438 * the list.
5439 */
5440static void quirk_intel_qat_vf_cap(struct pci_dev *pdev)
5441{
5442 int pos, i = 0, ret;
5443 u8 next_cap;
5444 u16 reg16, *cap;
5445 struct pci_cap_saved_state *state;
5446
5447 /* Bail if the hardware bug is fixed */
5448 if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP))
5449 return;
5450
5451 /* Bail if MSI Capability Structure is not found for some reason */
5452 pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
5453 if (!pos)
5454 return;
5455
5456 /*
5457 * Bail if Next Capability pointer in the MSI Capability Structure
5458 * is not the expected incorrect 0x00.
5459 */
5460 pci_read_config_byte(pdev, pos + 1, &next_cap);
5461 if (next_cap)
5462 return;
5463
5464 /*
5465 * PCIe Capability Structure is expected to be at 0x50 and should
5466 * terminate the list (Next Capability pointer is 0x00). Verify
5467 * Capability Id and Next Capability pointer is as expected.
5468 * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext()
5469 * to correctly set kernel data structures which have already been
5470 * set incorrectly due to the hardware bug.
5471 */
5472 pos = 0x50;
5473 pci_read_config_word(pdev, pos, ®16);
5474 if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) {
5475 u32 status;
5476#ifndef PCI_EXP_SAVE_REGS
5477#define PCI_EXP_SAVE_REGS 7
5478#endif
5479 int size = PCI_EXP_SAVE_REGS * sizeof(u16);
5480
5481 pdev->pcie_cap = pos;
5482 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
5483 pdev->pcie_flags_reg = reg16;
5484 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
5485 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
5486
5487 pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
5488 ret = pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status);
5489 if ((ret != PCIBIOS_SUCCESSFUL) || (PCI_POSSIBLE_ERROR(status)))
5490 pdev->cfg_size = PCI_CFG_SPACE_SIZE;
5491
5492 if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP))
5493 return;
5494
5495 /* Save PCIe cap */
5496 state = kzalloc(sizeof(*state) + size, GFP_KERNEL);
5497 if (!state)
5498 return;
5499
5500 state->cap.cap_nr = PCI_CAP_ID_EXP;
5501 state->cap.cap_extended = 0;
5502 state->cap.size = size;
5503 cap = (u16 *)&state->cap.data[0];
5504 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]);
5505 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]);
5506 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]);
5507 pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]);
5508 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]);
5509 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]);
5510 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]);
5511 hlist_add_head(&state->next, &pdev->saved_cap_space);
5512 }
5513}
5514DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap);
5515
5516/*
5517 * FLR may cause the following to devices to hang:
5518 *
5519 * AMD Starship/Matisse HD Audio Controller 0x1487
5520 * AMD Starship USB 3.0 Host Controller 0x148c
5521 * AMD Matisse USB 3.0 Host Controller 0x149c
5522 * Intel 82579LM Gigabit Ethernet Controller 0x1502
5523 * Intel 82579V Gigabit Ethernet Controller 0x1503
5524 * Mediatek MT7922 802.11ax PCI Express Wireless Network Adapter
5525 */
5526static void quirk_no_flr(struct pci_dev *dev)
5527{
5528 dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET;
5529}
5530DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr);
5531DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x148c, quirk_no_flr);
5532DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr);
5533DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x7901, quirk_no_flr);
5534DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
5535DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
5536DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MEDIATEK, 0x0616, quirk_no_flr);
5537
5538/* FLR may cause the SolidRun SNET DPU (rev 0x1) to hang */
5539static void quirk_no_flr_snet(struct pci_dev *dev)
5540{
5541 if (dev->revision == 0x1)
5542 quirk_no_flr(dev);
5543}
5544DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLIDRUN, 0x1000, quirk_no_flr_snet);
5545
5546static void quirk_no_ext_tags(struct pci_dev *pdev)
5547{
5548 struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
5549
5550 if (!bridge)
5551 return;
5552
5553 bridge->no_ext_tags = 1;
5554 pci_info(pdev, "disabling Extended Tags (this device can't handle them)\n");
5555
5556 pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL);
5557}
5558DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_3WARE, 0x1004, quirk_no_ext_tags);
5559DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0132, quirk_no_ext_tags);
5560DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags);
5561DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0141, quirk_no_ext_tags);
5562DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0142, quirk_no_ext_tags);
5563DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0144, quirk_no_ext_tags);
5564DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0420, quirk_no_ext_tags);
5565DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0422, quirk_no_ext_tags);
5566
5567#ifdef CONFIG_PCI_ATS
5568static void quirk_no_ats(struct pci_dev *pdev)
5569{
5570 pci_info(pdev, "disabling ATS\n");
5571 pdev->ats_cap = 0;
5572}
5573
5574/*
5575 * Some devices require additional driver setup to enable ATS. Don't use
5576 * ATS for those devices as ATS will be enabled before the driver has had a
5577 * chance to load and configure the device.
5578 */
5579static void quirk_amd_harvest_no_ats(struct pci_dev *pdev)
5580{
5581 if (pdev->device == 0x15d8) {
5582 if (pdev->revision == 0xcf &&
5583 pdev->subsystem_vendor == 0xea50 &&
5584 (pdev->subsystem_device == 0xce19 ||
5585 pdev->subsystem_device == 0xcc10 ||
5586 pdev->subsystem_device == 0xcc08))
5587 quirk_no_ats(pdev);
5588 } else {
5589 quirk_no_ats(pdev);
5590 }
5591}
5592
5593/* AMD Stoney platform GPU */
5594DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_amd_harvest_no_ats);
5595/* AMD Iceland dGPU */
5596DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6900, quirk_amd_harvest_no_ats);
5597/* AMD Navi10 dGPU */
5598DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7310, quirk_amd_harvest_no_ats);
5599DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7312, quirk_amd_harvest_no_ats);
5600DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7318, quirk_amd_harvest_no_ats);
5601DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7319, quirk_amd_harvest_no_ats);
5602DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731a, quirk_amd_harvest_no_ats);
5603DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731b, quirk_amd_harvest_no_ats);
5604DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731e, quirk_amd_harvest_no_ats);
5605DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731f, quirk_amd_harvest_no_ats);
5606/* AMD Navi14 dGPU */
5607DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7340, quirk_amd_harvest_no_ats);
5608DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7341, quirk_amd_harvest_no_ats);
5609DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7347, quirk_amd_harvest_no_ats);
5610DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x734f, quirk_amd_harvest_no_ats);
5611/* AMD Raven platform iGPU */
5612DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x15d8, quirk_amd_harvest_no_ats);
5613
5614/*
5615 * Intel IPU E2000 revisions before C0 implement incorrect endianness
5616 * in ATS Invalidate Request message body. Disable ATS for those devices.
5617 */
5618static void quirk_intel_e2000_no_ats(struct pci_dev *pdev)
5619{
5620 if (pdev->revision < 0x20)
5621 quirk_no_ats(pdev);
5622}
5623DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1451, quirk_intel_e2000_no_ats);
5624DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1452, quirk_intel_e2000_no_ats);
5625DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1453, quirk_intel_e2000_no_ats);
5626DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1454, quirk_intel_e2000_no_ats);
5627DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1455, quirk_intel_e2000_no_ats);
5628DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1457, quirk_intel_e2000_no_ats);
5629DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1459, quirk_intel_e2000_no_ats);
5630DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145a, quirk_intel_e2000_no_ats);
5631DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145c, quirk_intel_e2000_no_ats);
5632#endif /* CONFIG_PCI_ATS */
5633
5634/* Freescale PCIe doesn't support MSI in RC mode */
5635static void quirk_fsl_no_msi(struct pci_dev *pdev)
5636{
5637 if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
5638 pdev->no_msi = 1;
5639}
5640DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_no_msi);
5641
5642/*
5643 * Although not allowed by the spec, some multi-function devices have
5644 * dependencies of one function (consumer) on another (supplier). For the
5645 * consumer to work in D0, the supplier must also be in D0. Create a
5646 * device link from the consumer to the supplier to enforce this
5647 * dependency. Runtime PM is allowed by default on the consumer to prevent
5648 * it from permanently keeping the supplier awake.
5649 */
5650static void pci_create_device_link(struct pci_dev *pdev, unsigned int consumer,
5651 unsigned int supplier, unsigned int class,
5652 unsigned int class_shift)
5653{
5654 struct pci_dev *supplier_pdev;
5655
5656 if (PCI_FUNC(pdev->devfn) != consumer)
5657 return;
5658
5659 supplier_pdev = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
5660 pdev->bus->number,
5661 PCI_DEVFN(PCI_SLOT(pdev->devfn), supplier));
5662 if (!supplier_pdev || (supplier_pdev->class >> class_shift) != class) {
5663 pci_dev_put(supplier_pdev);
5664 return;
5665 }
5666
5667 if (device_link_add(&pdev->dev, &supplier_pdev->dev,
5668 DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME))
5669 pci_info(pdev, "D0 power state depends on %s\n",
5670 pci_name(supplier_pdev));
5671 else
5672 pci_err(pdev, "Cannot enforce power dependency on %s\n",
5673 pci_name(supplier_pdev));
5674
5675 pm_runtime_allow(&pdev->dev);
5676 pci_dev_put(supplier_pdev);
5677}
5678
5679/*
5680 * Create device link for GPUs with integrated HDA controller for streaming
5681 * audio to attached displays.
5682 */
5683static void quirk_gpu_hda(struct pci_dev *hda)
5684{
5685 pci_create_device_link(hda, 1, 0, PCI_BASE_CLASS_DISPLAY, 16);
5686}
5687DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
5688 PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
5689DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMD, PCI_ANY_ID,
5690 PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
5691DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
5692 PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
5693
5694/*
5695 * Create device link for GPUs with integrated USB xHCI Host
5696 * controller to VGA.
5697 */
5698static void quirk_gpu_usb(struct pci_dev *usb)
5699{
5700 pci_create_device_link(usb, 2, 0, PCI_BASE_CLASS_DISPLAY, 16);
5701}
5702DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
5703 PCI_CLASS_SERIAL_USB, 8, quirk_gpu_usb);
5704DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
5705 PCI_CLASS_SERIAL_USB, 8, quirk_gpu_usb);
5706
5707/*
5708 * Create device link for GPUs with integrated Type-C UCSI controller
5709 * to VGA. Currently there is no class code defined for UCSI device over PCI
5710 * so using UNKNOWN class for now and it will be updated when UCSI
5711 * over PCI gets a class code.
5712 */
5713#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
5714static void quirk_gpu_usb_typec_ucsi(struct pci_dev *ucsi)
5715{
5716 pci_create_device_link(ucsi, 3, 0, PCI_BASE_CLASS_DISPLAY, 16);
5717}
5718DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
5719 PCI_CLASS_SERIAL_UNKNOWN, 8,
5720 quirk_gpu_usb_typec_ucsi);
5721DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
5722 PCI_CLASS_SERIAL_UNKNOWN, 8,
5723 quirk_gpu_usb_typec_ucsi);
5724
5725/*
5726 * Enable the NVIDIA GPU integrated HDA controller if the BIOS left it
5727 * disabled. https://devtalk.nvidia.com/default/topic/1024022
5728 */
5729static void quirk_nvidia_hda(struct pci_dev *gpu)
5730{
5731 u8 hdr_type;
5732 u32 val;
5733
5734 /* There was no integrated HDA controller before MCP89 */
5735 if (gpu->device < PCI_DEVICE_ID_NVIDIA_GEFORCE_320M)
5736 return;
5737
5738 /* Bit 25 at offset 0x488 enables the HDA controller */
5739 pci_read_config_dword(gpu, 0x488, &val);
5740 if (val & BIT(25))
5741 return;
5742
5743 pci_info(gpu, "Enabling HDA controller\n");
5744 pci_write_config_dword(gpu, 0x488, val | BIT(25));
5745
5746 /* The GPU becomes a multi-function device when the HDA is enabled */
5747 pci_read_config_byte(gpu, PCI_HEADER_TYPE, &hdr_type);
5748 gpu->multifunction = FIELD_GET(PCI_HEADER_TYPE_MFD, hdr_type);
5749}
5750DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
5751 PCI_BASE_CLASS_DISPLAY, 16, quirk_nvidia_hda);
5752DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
5753 PCI_BASE_CLASS_DISPLAY, 16, quirk_nvidia_hda);
5754
5755/*
5756 * Some IDT switches incorrectly flag an ACS Source Validation error on
5757 * completions for config read requests even though PCIe r4.0, sec
5758 * 6.12.1.1, says that completions are never affected by ACS Source
5759 * Validation. Here's the text of IDT 89H32H8G3-YC, erratum #36:
5760 *
5761 * Item #36 - Downstream port applies ACS Source Validation to Completions
5762 * Section 6.12.1.1 of the PCI Express Base Specification 3.1 states that
5763 * completions are never affected by ACS Source Validation. However,
5764 * completions received by a downstream port of the PCIe switch from a
5765 * device that has not yet captured a PCIe bus number are incorrectly
5766 * dropped by ACS Source Validation by the switch downstream port.
5767 *
5768 * The workaround suggested by IDT is to issue a config write to the
5769 * downstream device before issuing the first config read. This allows the
5770 * downstream device to capture its bus and device numbers (see PCIe r4.0,
5771 * sec 2.2.9), thus avoiding the ACS error on the completion.
5772 *
5773 * However, we don't know when the device is ready to accept the config
5774 * write, so we do config reads until we receive a non-Config Request Retry
5775 * Status, then do the config write.
5776 *
5777 * To avoid hitting the erratum when doing the config reads, we disable ACS
5778 * SV around this process.
5779 */
5780int pci_idt_bus_quirk(struct pci_bus *bus, int devfn, u32 *l, int timeout)
5781{
5782 int pos;
5783 u16 ctrl = 0;
5784 bool found;
5785 struct pci_dev *bridge = bus->self;
5786
5787 pos = bridge->acs_cap;
5788
5789 /* Disable ACS SV before initial config reads */
5790 if (pos) {
5791 pci_read_config_word(bridge, pos + PCI_ACS_CTRL, &ctrl);
5792 if (ctrl & PCI_ACS_SV)
5793 pci_write_config_word(bridge, pos + PCI_ACS_CTRL,
5794 ctrl & ~PCI_ACS_SV);
5795 }
5796
5797 found = pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
5798
5799 /* Write Vendor ID (read-only) so the endpoint latches its bus/dev */
5800 if (found)
5801 pci_bus_write_config_word(bus, devfn, PCI_VENDOR_ID, 0);
5802
5803 /* Re-enable ACS_SV if it was previously enabled */
5804 if (ctrl & PCI_ACS_SV)
5805 pci_write_config_word(bridge, pos + PCI_ACS_CTRL, ctrl);
5806
5807 return found;
5808}
5809
5810/*
5811 * Microsemi Switchtec NTB uses devfn proxy IDs to move TLPs between
5812 * NT endpoints via the internal switch fabric. These IDs replace the
5813 * originating Requester ID TLPs which access host memory on peer NTB
5814 * ports. Therefore, all proxy IDs must be aliased to the NTB device
5815 * to permit access when the IOMMU is turned on.
5816 */
5817static void quirk_switchtec_ntb_dma_alias(struct pci_dev *pdev)
5818{
5819 void __iomem *mmio;
5820 struct ntb_info_regs __iomem *mmio_ntb;
5821 struct ntb_ctrl_regs __iomem *mmio_ctrl;
5822 u64 partition_map;
5823 u8 partition;
5824 int pp;
5825
5826 if (pci_enable_device(pdev)) {
5827 pci_err(pdev, "Cannot enable Switchtec device\n");
5828 return;
5829 }
5830
5831 mmio = pci_iomap(pdev, 0, 0);
5832 if (mmio == NULL) {
5833 pci_disable_device(pdev);
5834 pci_err(pdev, "Cannot iomap Switchtec device\n");
5835 return;
5836 }
5837
5838 pci_info(pdev, "Setting Switchtec proxy ID aliases\n");
5839
5840 mmio_ntb = mmio + SWITCHTEC_GAS_NTB_OFFSET;
5841 mmio_ctrl = (void __iomem *) mmio_ntb + SWITCHTEC_NTB_REG_CTRL_OFFSET;
5842
5843 partition = ioread8(&mmio_ntb->partition_id);
5844
5845 partition_map = ioread32(&mmio_ntb->ep_map);
5846 partition_map |= ((u64) ioread32(&mmio_ntb->ep_map + 4)) << 32;
5847 partition_map &= ~(1ULL << partition);
5848
5849 for (pp = 0; pp < (sizeof(partition_map) * 8); pp++) {
5850 struct ntb_ctrl_regs __iomem *mmio_peer_ctrl;
5851 u32 table_sz = 0;
5852 int te;
5853
5854 if (!(partition_map & (1ULL << pp)))
5855 continue;
5856
5857 pci_dbg(pdev, "Processing partition %d\n", pp);
5858
5859 mmio_peer_ctrl = &mmio_ctrl[pp];
5860
5861 table_sz = ioread16(&mmio_peer_ctrl->req_id_table_size);
5862 if (!table_sz) {
5863 pci_warn(pdev, "Partition %d table_sz 0\n", pp);
5864 continue;
5865 }
5866
5867 if (table_sz > 512) {
5868 pci_warn(pdev,
5869 "Invalid Switchtec partition %d table_sz %d\n",
5870 pp, table_sz);
5871 continue;
5872 }
5873
5874 for (te = 0; te < table_sz; te++) {
5875 u32 rid_entry;
5876 u8 devfn;
5877
5878 rid_entry = ioread32(&mmio_peer_ctrl->req_id_table[te]);
5879 devfn = (rid_entry >> 1) & 0xFF;
5880 pci_dbg(pdev,
5881 "Aliasing Partition %d Proxy ID %02x.%d\n",
5882 pp, PCI_SLOT(devfn), PCI_FUNC(devfn));
5883 pci_add_dma_alias(pdev, devfn, 1);
5884 }
5885 }
5886
5887 pci_iounmap(pdev, mmio);
5888 pci_disable_device(pdev);
5889}
5890#define SWITCHTEC_QUIRK(vid) \
5891 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_MICROSEMI, vid, \
5892 PCI_CLASS_BRIDGE_OTHER, 8, quirk_switchtec_ntb_dma_alias)
5893
5894SWITCHTEC_QUIRK(0x8531); /* PFX 24xG3 */
5895SWITCHTEC_QUIRK(0x8532); /* PFX 32xG3 */
5896SWITCHTEC_QUIRK(0x8533); /* PFX 48xG3 */
5897SWITCHTEC_QUIRK(0x8534); /* PFX 64xG3 */
5898SWITCHTEC_QUIRK(0x8535); /* PFX 80xG3 */
5899SWITCHTEC_QUIRK(0x8536); /* PFX 96xG3 */
5900SWITCHTEC_QUIRK(0x8541); /* PSX 24xG3 */
5901SWITCHTEC_QUIRK(0x8542); /* PSX 32xG3 */
5902SWITCHTEC_QUIRK(0x8543); /* PSX 48xG3 */
5903SWITCHTEC_QUIRK(0x8544); /* PSX 64xG3 */
5904SWITCHTEC_QUIRK(0x8545); /* PSX 80xG3 */
5905SWITCHTEC_QUIRK(0x8546); /* PSX 96xG3 */
5906SWITCHTEC_QUIRK(0x8551); /* PAX 24XG3 */
5907SWITCHTEC_QUIRK(0x8552); /* PAX 32XG3 */
5908SWITCHTEC_QUIRK(0x8553); /* PAX 48XG3 */
5909SWITCHTEC_QUIRK(0x8554); /* PAX 64XG3 */
5910SWITCHTEC_QUIRK(0x8555); /* PAX 80XG3 */
5911SWITCHTEC_QUIRK(0x8556); /* PAX 96XG3 */
5912SWITCHTEC_QUIRK(0x8561); /* PFXL 24XG3 */
5913SWITCHTEC_QUIRK(0x8562); /* PFXL 32XG3 */
5914SWITCHTEC_QUIRK(0x8563); /* PFXL 48XG3 */
5915SWITCHTEC_QUIRK(0x8564); /* PFXL 64XG3 */
5916SWITCHTEC_QUIRK(0x8565); /* PFXL 80XG3 */
5917SWITCHTEC_QUIRK(0x8566); /* PFXL 96XG3 */
5918SWITCHTEC_QUIRK(0x8571); /* PFXI 24XG3 */
5919SWITCHTEC_QUIRK(0x8572); /* PFXI 32XG3 */
5920SWITCHTEC_QUIRK(0x8573); /* PFXI 48XG3 */
5921SWITCHTEC_QUIRK(0x8574); /* PFXI 64XG3 */
5922SWITCHTEC_QUIRK(0x8575); /* PFXI 80XG3 */
5923SWITCHTEC_QUIRK(0x8576); /* PFXI 96XG3 */
5924SWITCHTEC_QUIRK(0x4000); /* PFX 100XG4 */
5925SWITCHTEC_QUIRK(0x4084); /* PFX 84XG4 */
5926SWITCHTEC_QUIRK(0x4068); /* PFX 68XG4 */
5927SWITCHTEC_QUIRK(0x4052); /* PFX 52XG4 */
5928SWITCHTEC_QUIRK(0x4036); /* PFX 36XG4 */
5929SWITCHTEC_QUIRK(0x4028); /* PFX 28XG4 */
5930SWITCHTEC_QUIRK(0x4100); /* PSX 100XG4 */
5931SWITCHTEC_QUIRK(0x4184); /* PSX 84XG4 */
5932SWITCHTEC_QUIRK(0x4168); /* PSX 68XG4 */
5933SWITCHTEC_QUIRK(0x4152); /* PSX 52XG4 */
5934SWITCHTEC_QUIRK(0x4136); /* PSX 36XG4 */
5935SWITCHTEC_QUIRK(0x4128); /* PSX 28XG4 */
5936SWITCHTEC_QUIRK(0x4200); /* PAX 100XG4 */
5937SWITCHTEC_QUIRK(0x4284); /* PAX 84XG4 */
5938SWITCHTEC_QUIRK(0x4268); /* PAX 68XG4 */
5939SWITCHTEC_QUIRK(0x4252); /* PAX 52XG4 */
5940SWITCHTEC_QUIRK(0x4236); /* PAX 36XG4 */
5941SWITCHTEC_QUIRK(0x4228); /* PAX 28XG4 */
5942SWITCHTEC_QUIRK(0x4352); /* PFXA 52XG4 */
5943SWITCHTEC_QUIRK(0x4336); /* PFXA 36XG4 */
5944SWITCHTEC_QUIRK(0x4328); /* PFXA 28XG4 */
5945SWITCHTEC_QUIRK(0x4452); /* PSXA 52XG4 */
5946SWITCHTEC_QUIRK(0x4436); /* PSXA 36XG4 */
5947SWITCHTEC_QUIRK(0x4428); /* PSXA 28XG4 */
5948SWITCHTEC_QUIRK(0x4552); /* PAXA 52XG4 */
5949SWITCHTEC_QUIRK(0x4536); /* PAXA 36XG4 */
5950SWITCHTEC_QUIRK(0x4528); /* PAXA 28XG4 */
5951SWITCHTEC_QUIRK(0x5000); /* PFX 100XG5 */
5952SWITCHTEC_QUIRK(0x5084); /* PFX 84XG5 */
5953SWITCHTEC_QUIRK(0x5068); /* PFX 68XG5 */
5954SWITCHTEC_QUIRK(0x5052); /* PFX 52XG5 */
5955SWITCHTEC_QUIRK(0x5036); /* PFX 36XG5 */
5956SWITCHTEC_QUIRK(0x5028); /* PFX 28XG5 */
5957SWITCHTEC_QUIRK(0x5100); /* PSX 100XG5 */
5958SWITCHTEC_QUIRK(0x5184); /* PSX 84XG5 */
5959SWITCHTEC_QUIRK(0x5168); /* PSX 68XG5 */
5960SWITCHTEC_QUIRK(0x5152); /* PSX 52XG5 */
5961SWITCHTEC_QUIRK(0x5136); /* PSX 36XG5 */
5962SWITCHTEC_QUIRK(0x5128); /* PSX 28XG5 */
5963SWITCHTEC_QUIRK(0x5200); /* PAX 100XG5 */
5964SWITCHTEC_QUIRK(0x5284); /* PAX 84XG5 */
5965SWITCHTEC_QUIRK(0x5268); /* PAX 68XG5 */
5966SWITCHTEC_QUIRK(0x5252); /* PAX 52XG5 */
5967SWITCHTEC_QUIRK(0x5236); /* PAX 36XG5 */
5968SWITCHTEC_QUIRK(0x5228); /* PAX 28XG5 */
5969SWITCHTEC_QUIRK(0x5300); /* PFXA 100XG5 */
5970SWITCHTEC_QUIRK(0x5384); /* PFXA 84XG5 */
5971SWITCHTEC_QUIRK(0x5368); /* PFXA 68XG5 */
5972SWITCHTEC_QUIRK(0x5352); /* PFXA 52XG5 */
5973SWITCHTEC_QUIRK(0x5336); /* PFXA 36XG5 */
5974SWITCHTEC_QUIRK(0x5328); /* PFXA 28XG5 */
5975SWITCHTEC_QUIRK(0x5400); /* PSXA 100XG5 */
5976SWITCHTEC_QUIRK(0x5484); /* PSXA 84XG5 */
5977SWITCHTEC_QUIRK(0x5468); /* PSXA 68XG5 */
5978SWITCHTEC_QUIRK(0x5452); /* PSXA 52XG5 */
5979SWITCHTEC_QUIRK(0x5436); /* PSXA 36XG5 */
5980SWITCHTEC_QUIRK(0x5428); /* PSXA 28XG5 */
5981SWITCHTEC_QUIRK(0x5500); /* PAXA 100XG5 */
5982SWITCHTEC_QUIRK(0x5584); /* PAXA 84XG5 */
5983SWITCHTEC_QUIRK(0x5568); /* PAXA 68XG5 */
5984SWITCHTEC_QUIRK(0x5552); /* PAXA 52XG5 */
5985SWITCHTEC_QUIRK(0x5536); /* PAXA 36XG5 */
5986SWITCHTEC_QUIRK(0x5528); /* PAXA 28XG5 */
5987
5988#define SWITCHTEC_PCI100X_QUIRK(vid) \
5989 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_EFAR, vid, \
5990 PCI_CLASS_BRIDGE_OTHER, 8, quirk_switchtec_ntb_dma_alias)
5991SWITCHTEC_PCI100X_QUIRK(0x1001); /* PCI1001XG4 */
5992SWITCHTEC_PCI100X_QUIRK(0x1002); /* PCI1002XG4 */
5993SWITCHTEC_PCI100X_QUIRK(0x1003); /* PCI1003XG4 */
5994SWITCHTEC_PCI100X_QUIRK(0x1004); /* PCI1004XG4 */
5995SWITCHTEC_PCI100X_QUIRK(0x1005); /* PCI1005XG4 */
5996SWITCHTEC_PCI100X_QUIRK(0x1006); /* PCI1006XG4 */
5997
5998
5999/*
6000 * The PLX NTB uses devfn proxy IDs to move TLPs between NT endpoints.
6001 * These IDs are used to forward responses to the originator on the other
6002 * side of the NTB. Alias all possible IDs to the NTB to permit access when
6003 * the IOMMU is turned on.
6004 */
6005static void quirk_plx_ntb_dma_alias(struct pci_dev *pdev)
6006{
6007 pci_info(pdev, "Setting PLX NTB proxy ID aliases\n");
6008 /* PLX NTB may use all 256 devfns */
6009 pci_add_dma_alias(pdev, 0, 256);
6010}
6011DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b0, quirk_plx_ntb_dma_alias);
6012DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b1, quirk_plx_ntb_dma_alias);
6013
6014/*
6015 * On Lenovo Thinkpad P50 SKUs with a Nvidia Quadro M1000M, the BIOS does
6016 * not always reset the secondary Nvidia GPU between reboots if the system
6017 * is configured to use Hybrid Graphics mode. This results in the GPU
6018 * being left in whatever state it was in during the *previous* boot, which
6019 * causes spurious interrupts from the GPU, which in turn causes us to
6020 * disable the wrong IRQ and end up breaking the touchpad. Unsurprisingly,
6021 * this also completely breaks nouveau.
6022 *
6023 * Luckily, it seems a simple reset of the Nvidia GPU brings it back to a
6024 * clean state and fixes all these issues.
6025 *
6026 * When the machine is configured in Dedicated display mode, the issue
6027 * doesn't occur. Fortunately the GPU advertises NoReset+ when in this
6028 * mode, so we can detect that and avoid resetting it.
6029 */
6030static void quirk_reset_lenovo_thinkpad_p50_nvgpu(struct pci_dev *pdev)
6031{
6032 void __iomem *map;
6033 int ret;
6034
6035 if (pdev->subsystem_vendor != PCI_VENDOR_ID_LENOVO ||
6036 pdev->subsystem_device != 0x222e ||
6037 !pci_reset_supported(pdev))
6038 return;
6039
6040 if (pci_enable_device_mem(pdev))
6041 return;
6042
6043 /*
6044 * Based on nvkm_device_ctor() in
6045 * drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
6046 */
6047 map = pci_iomap(pdev, 0, 0x23000);
6048 if (!map) {
6049 pci_err(pdev, "Can't map MMIO space\n");
6050 goto out_disable;
6051 }
6052
6053 /*
6054 * Make sure the GPU looks like it's been POSTed before resetting
6055 * it.
6056 */
6057 if (ioread32(map + 0x2240c) & 0x2) {
6058 pci_info(pdev, FW_BUG "GPU left initialized by EFI, resetting\n");
6059 ret = pci_reset_bus(pdev);
6060 if (ret < 0)
6061 pci_err(pdev, "Failed to reset GPU: %d\n", ret);
6062 }
6063
6064 iounmap(map);
6065out_disable:
6066 pci_disable_device(pdev);
6067}
6068DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, 0x13b1,
6069 PCI_CLASS_DISPLAY_VGA, 8,
6070 quirk_reset_lenovo_thinkpad_p50_nvgpu);
6071
6072/*
6073 * Device [1b21:2142]
6074 * When in D0, PME# doesn't get asserted when plugging USB 3.0 device.
6075 */
6076static void pci_fixup_no_d0_pme(struct pci_dev *dev)
6077{
6078 pci_info(dev, "PME# does not work under D0, disabling it\n");
6079 dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT);
6080}
6081DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
6082
6083/*
6084 * Device 12d8:0x400e [OHCI] and 12d8:0x400f [EHCI]
6085 *
6086 * These devices advertise PME# support in all power states but don't
6087 * reliably assert it.
6088 *
6089 * These devices also advertise MSI, but documentation (PI7C9X440SL.pdf)
6090 * says "The MSI Function is not implemented on this device" in chapters
6091 * 7.3.27, 7.3.29-7.3.31.
6092 */
6093static void pci_fixup_no_msi_no_pme(struct pci_dev *dev)
6094{
6095#ifdef CONFIG_PCI_MSI
6096 pci_info(dev, "MSI is not implemented on this device, disabling it\n");
6097 dev->no_msi = 1;
6098#endif
6099 pci_info(dev, "PME# is unreliable, disabling it\n");
6100 dev->pme_support = 0;
6101}
6102DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_msi_no_pme);
6103DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_msi_no_pme);
6104
6105static void apex_pci_fixup_class(struct pci_dev *pdev)
6106{
6107 pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
6108}
6109DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
6110 PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
6111
6112/*
6113 * Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 switch erratum E5 -
6114 * ACS P2P Request Redirect is not functional
6115 *
6116 * When ACS P2P Request Redirect is enabled and bandwidth is not balanced
6117 * between upstream and downstream ports, packets are queued in an internal
6118 * buffer until CPLD packet. The workaround is to use the switch in store and
6119 * forward mode.
6120 */
6121#define PI7C9X2Gxxx_MODE_REG 0x74
6122#define PI7C9X2Gxxx_STORE_FORWARD_MODE BIT(0)
6123static void pci_fixup_pericom_acs_store_forward(struct pci_dev *pdev)
6124{
6125 struct pci_dev *upstream;
6126 u16 val;
6127
6128 /* Downstream ports only */
6129 if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)
6130 return;
6131
6132 /* Check for ACS P2P Request Redirect use */
6133 if (!pdev->acs_cap)
6134 return;
6135 pci_read_config_word(pdev, pdev->acs_cap + PCI_ACS_CTRL, &val);
6136 if (!(val & PCI_ACS_RR))
6137 return;
6138
6139 upstream = pci_upstream_bridge(pdev);
6140 if (!upstream)
6141 return;
6142
6143 pci_read_config_word(upstream, PI7C9X2Gxxx_MODE_REG, &val);
6144 if (!(val & PI7C9X2Gxxx_STORE_FORWARD_MODE)) {
6145 pci_info(upstream, "Setting PI7C9X2Gxxx store-forward mode to avoid ACS erratum\n");
6146 pci_write_config_word(upstream, PI7C9X2Gxxx_MODE_REG, val |
6147 PI7C9X2Gxxx_STORE_FORWARD_MODE);
6148 }
6149}
6150/*
6151 * Apply fixup on enable and on resume, in order to apply the fix up whenever
6152 * ACS configuration changes or switch mode is reset
6153 */
6154DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_PERICOM, 0x2404,
6155 pci_fixup_pericom_acs_store_forward);
6156DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2404,
6157 pci_fixup_pericom_acs_store_forward);
6158DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_PERICOM, 0x2304,
6159 pci_fixup_pericom_acs_store_forward);
6160DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2304,
6161 pci_fixup_pericom_acs_store_forward);
6162DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_PERICOM, 0x2303,
6163 pci_fixup_pericom_acs_store_forward);
6164DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2303,
6165 pci_fixup_pericom_acs_store_forward);
6166
6167static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
6168{
6169 pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
6170}
6171DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
6172
6173static void rom_bar_overlap_defect(struct pci_dev *dev)
6174{
6175 pci_info(dev, "working around ROM BAR overlap defect\n");
6176 dev->rom_bar_overlap = 1;
6177}
6178DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1533, rom_bar_overlap_defect);
6179DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1536, rom_bar_overlap_defect);
6180DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1537, rom_bar_overlap_defect);
6181DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1538, rom_bar_overlap_defect);
6182
6183#ifdef CONFIG_PCIEASPM
6184/*
6185 * Several Intel DG2 graphics devices advertise that they can only tolerate
6186 * 1us latency when transitioning from L1 to L0, which may prevent ASPM L1
6187 * from being enabled. But in fact these devices can tolerate unlimited
6188 * latency. Override their Device Capabilities value to allow ASPM L1 to
6189 * be enabled.
6190 */
6191static void aspm_l1_acceptable_latency(struct pci_dev *dev)
6192{
6193 u32 l1_lat = FIELD_GET(PCI_EXP_DEVCAP_L1, dev->devcap);
6194
6195 if (l1_lat < 7) {
6196 dev->devcap |= FIELD_PREP(PCI_EXP_DEVCAP_L1, 7);
6197 pci_info(dev, "ASPM: overriding L1 acceptable latency from %#x to 0x7\n",
6198 l1_lat);
6199 }
6200}
6201DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f80, aspm_l1_acceptable_latency);
6202DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f81, aspm_l1_acceptable_latency);
6203DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f82, aspm_l1_acceptable_latency);
6204DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f83, aspm_l1_acceptable_latency);
6205DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f84, aspm_l1_acceptable_latency);
6206DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f85, aspm_l1_acceptable_latency);
6207DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f86, aspm_l1_acceptable_latency);
6208DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f87, aspm_l1_acceptable_latency);
6209DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f88, aspm_l1_acceptable_latency);
6210DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5690, aspm_l1_acceptable_latency);
6211DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5691, aspm_l1_acceptable_latency);
6212DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5692, aspm_l1_acceptable_latency);
6213DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5693, aspm_l1_acceptable_latency);
6214DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5694, aspm_l1_acceptable_latency);
6215DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5695, aspm_l1_acceptable_latency);
6216DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a0, aspm_l1_acceptable_latency);
6217DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a1, aspm_l1_acceptable_latency);
6218DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a2, aspm_l1_acceptable_latency);
6219DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a3, aspm_l1_acceptable_latency);
6220DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a4, aspm_l1_acceptable_latency);
6221DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a5, aspm_l1_acceptable_latency);
6222DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a6, aspm_l1_acceptable_latency);
6223DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b0, aspm_l1_acceptable_latency);
6224DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b1, aspm_l1_acceptable_latency);
6225DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c0, aspm_l1_acceptable_latency);
6226DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c1, aspm_l1_acceptable_latency);
6227#endif
6228
6229#ifdef CONFIG_PCIE_DPC
6230/*
6231 * Intel Ice Lake, Tiger Lake and Alder Lake BIOS has a bug that clears
6232 * the DPC RP PIO Log Size of the integrated Thunderbolt PCIe Root
6233 * Ports.
6234 */
6235static void dpc_log_size(struct pci_dev *dev)
6236{
6237 u16 dpc, val;
6238
6239 dpc = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
6240 if (!dpc)
6241 return;
6242
6243 pci_read_config_word(dev, dpc + PCI_EXP_DPC_CAP, &val);
6244 if (!(val & PCI_EXP_DPC_CAP_RP_EXT))
6245 return;
6246
6247 if (FIELD_GET(PCI_EXP_DPC_RP_PIO_LOG_SIZE, val) == 0) {
6248 pci_info(dev, "Overriding RP PIO Log Size to 4\n");
6249 dev->dpc_rp_log_size = 4;
6250 }
6251}
6252DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x461f, dpc_log_size);
6253DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x462f, dpc_log_size);
6254DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x463f, dpc_log_size);
6255DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x466e, dpc_log_size);
6256DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a1d, dpc_log_size);
6257DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a1f, dpc_log_size);
6258DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a21, dpc_log_size);
6259DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a23, dpc_log_size);
6260DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a23, dpc_log_size);
6261DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a25, dpc_log_size);
6262DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a27, dpc_log_size);
6263DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a29, dpc_log_size);
6264DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2b, dpc_log_size);
6265DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2d, dpc_log_size);
6266DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2f, dpc_log_size);
6267DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a31, dpc_log_size);
6268DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0xa72f, dpc_log_size);
6269DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0xa73f, dpc_log_size);
6270DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0xa76e, dpc_log_size);
6271#endif
6272
6273/*
6274 * For a PCI device with multiple downstream devices, its driver may use
6275 * a flattened device tree to describe the downstream devices.
6276 * To overlay the flattened device tree, the PCI device and all its ancestor
6277 * devices need to have device tree nodes on system base device tree. Thus,
6278 * before driver probing, it might need to add a device tree node as the final
6279 * fixup.
6280 */
6281DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node);
6282DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node);
6283DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node);
6284DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, 0x9660, of_pci_make_dev_node);
6285
6286/*
6287 * Devices known to require a longer delay before first config space access
6288 * after reset recovery or resume from D3cold:
6289 *
6290 * VideoPropulsion (aka Genroco) Torrent QN16e MPEG QAM Modulator
6291 */
6292static void pci_fixup_d3cold_delay_1sec(struct pci_dev *pdev)
6293{
6294 pdev->d3cold_delay = 1000;
6295}
6296DECLARE_PCI_FIXUP_FINAL(0x5555, 0x0004, pci_fixup_d3cold_delay_1sec);
6297
6298#ifdef CONFIG_PCIEAER
6299static void pci_mask_replay_timer_timeout(struct pci_dev *pdev)
6300{
6301 struct pci_dev *parent = pci_upstream_bridge(pdev);
6302 u32 val;
6303
6304 if (!parent || !parent->aer_cap)
6305 return;
6306
6307 pci_info(parent, "mask Replay Timer Timeout Correctable Errors due to %s hardware defect",
6308 pci_name(pdev));
6309
6310 pci_read_config_dword(parent, parent->aer_cap + PCI_ERR_COR_MASK, &val);
6311 val |= PCI_ERR_COR_REP_TIMER;
6312 pci_write_config_dword(parent, parent->aer_cap + PCI_ERR_COR_MASK, val);
6313}
6314DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_GLI, 0x9750, pci_mask_replay_timer_timeout);
6315DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_GLI, 0x9755, pci_mask_replay_timer_timeout);
6316#endif