Loading...
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994, 1995 Waldorf GmbH
7 * Copyright (C) 1994 - 2000, 06 Ralf Baechle
8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
9 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
10 * Author: Maciej W. Rozycki <macro@mips.com>
11 */
12#ifndef _ASM_IO_H
13#define _ASM_IO_H
14
15#include <linux/compiler.h>
16#include <linux/types.h>
17#include <linux/irqflags.h>
18
19#include <asm/addrspace.h>
20#include <asm/barrier.h>
21#include <asm/bug.h>
22#include <asm/byteorder.h>
23#include <asm/cpu.h>
24#include <asm/cpu-features.h>
25#include <asm/page.h>
26#include <asm/pgtable-bits.h>
27#include <asm/string.h>
28#include <mangle-port.h>
29
30/*
31 * Raw operations are never swapped in software. OTOH values that raw
32 * operations are working on may or may not have been swapped by the bus
33 * hardware. An example use would be for flash memory that's used for
34 * execute in place.
35 */
36# define __raw_ioswabb(a, x) (x)
37# define __raw_ioswabw(a, x) (x)
38# define __raw_ioswabl(a, x) (x)
39# define __raw_ioswabq(a, x) (x)
40# define ____raw_ioswabq(a, x) (x)
41
42# define _ioswabb ioswabb
43# define _ioswabw ioswabw
44# define _ioswabl ioswabl
45# define _ioswabq ioswabq
46
47# define __relaxed_ioswabb ioswabb
48# define __relaxed_ioswabw ioswabw
49# define __relaxed_ioswabl ioswabl
50# define __relaxed_ioswabq ioswabq
51
52/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
53
54/*
55 * On MIPS I/O ports are memory mapped, so we access them using normal
56 * load/store instructions. mips_io_port_base is the virtual address to
57 * which all ports are being mapped. For sake of efficiency some code
58 * assumes that this is an address that can be loaded with a single lui
59 * instruction, so the lower 16 bits must be zero. Should be true on
60 * any sane architecture; generic code does not use this assumption.
61 */
62extern unsigned long mips_io_port_base;
63
64static inline void set_io_port_base(unsigned long base)
65{
66 mips_io_port_base = base;
67}
68
69/*
70 * Provide the necessary definitions for generic iomap. We make use of
71 * mips_io_port_base for iomap(), but we don't reserve any low addresses for
72 * use with I/O ports.
73 */
74
75#define HAVE_ARCH_PIO_SIZE
76#define PIO_OFFSET mips_io_port_base
77#define PIO_MASK IO_SPACE_LIMIT
78#define PIO_RESERVED 0x0UL
79
80/*
81 * Enforce in-order execution of data I/O. In the MIPS architecture
82 * these are equivalent to corresponding platform-specific memory
83 * barriers defined in <asm/barrier.h>. API pinched from PowerPC,
84 * with sync additionally defined.
85 */
86#define iobarrier_rw() mb()
87#define iobarrier_r() rmb()
88#define iobarrier_w() wmb()
89#define iobarrier_sync() iob()
90
91/*
92 * virt_to_phys - map virtual addresses to physical
93 * @address: address to remap
94 *
95 * The returned physical address is the physical (CPU) mapping for
96 * the memory address given. It is only valid to use this function on
97 * addresses directly mapped or allocated via kmalloc.
98 *
99 * This function does not give bus mappings for DMA transfers. In
100 * almost all conceivable cases a device driver should not be using
101 * this function
102 */
103static inline unsigned long __virt_to_phys_nodebug(volatile const void *address)
104{
105 return __pa(address);
106}
107
108#ifdef CONFIG_DEBUG_VIRTUAL
109extern phys_addr_t __virt_to_phys(volatile const void *x);
110#else
111#define __virt_to_phys(x) __virt_to_phys_nodebug(x)
112#endif
113
114#define virt_to_phys virt_to_phys
115static inline phys_addr_t virt_to_phys(const volatile void *x)
116{
117 return __virt_to_phys(x);
118}
119
120/*
121 * ISA I/O bus memory addresses are 1:1 with the physical address.
122 */
123static inline unsigned long isa_virt_to_bus(volatile void *address)
124{
125 return virt_to_phys(address);
126}
127
128/*
129 * Change "struct page" to physical address.
130 */
131#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
132
133void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
134 unsigned long prot_val);
135void iounmap(const volatile void __iomem *addr);
136
137/*
138 * ioremap - map bus memory into CPU space
139 * @offset: bus address of the memory
140 * @size: size of the resource to map
141 *
142 * ioremap performs a platform specific sequence of operations to
143 * make bus memory CPU accessible via the readb/readw/readl/writeb/
144 * writew/writel functions and the other mmio helpers. The returned
145 * address is not guaranteed to be usable directly as a virtual
146 * address.
147 */
148#define ioremap(offset, size) \
149 ioremap_prot((offset), (size), _CACHE_UNCACHED)
150
151/*
152 * ioremap_cache - map bus memory into CPU space
153 * @offset: bus address of the memory
154 * @size: size of the resource to map
155 *
156 * ioremap_cache performs a platform specific sequence of operations to
157 * make bus memory CPU accessible via the readb/readw/readl/writeb/
158 * writew/writel functions and the other mmio helpers. The returned
159 * address is not guaranteed to be usable directly as a virtual
160 * address.
161 *
162 * This version of ioremap ensures that the memory is marked cacheable by
163 * the CPU. Also enables full write-combining. Useful for some
164 * memory-like regions on I/O busses.
165 */
166#define ioremap_cache(offset, size) \
167 ioremap_prot((offset), (size), _page_cachable_default)
168
169/*
170 * ioremap_wc - map bus memory into CPU space
171 * @offset: bus address of the memory
172 * @size: size of the resource to map
173 *
174 * ioremap_wc performs a platform specific sequence of operations to
175 * make bus memory CPU accessible via the readb/readw/readl/writeb/
176 * writew/writel functions and the other mmio helpers. The returned
177 * address is not guaranteed to be usable directly as a virtual
178 * address.
179 *
180 * This version of ioremap ensures that the memory is marked uncacheable
181 * but accelerated by means of write-combining feature. It is specifically
182 * useful for PCIe prefetchable windows, which may vastly improve a
183 * communications performance. If it was determined on boot stage, what
184 * CPU CCA doesn't support UCA, the method shall fall-back to the
185 * _CACHE_UNCACHED option (see cpu_probe() method).
186 */
187#define ioremap_wc(offset, size) \
188 ioremap_prot((offset), (size), boot_cpu_data.writecombine)
189
190#if defined(CONFIG_CPU_CAVIUM_OCTEON)
191#define war_io_reorder_wmb() wmb()
192#else
193#define war_io_reorder_wmb() barrier()
194#endif
195
196#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, barrier, relax, irq) \
197 \
198static inline void pfx##write##bwlq(type val, \
199 volatile void __iomem *mem) \
200{ \
201 volatile type *__mem; \
202 type __val; \
203 \
204 if (barrier) \
205 iobarrier_rw(); \
206 else \
207 war_io_reorder_wmb(); \
208 \
209 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
210 \
211 __val = pfx##ioswab##bwlq(__mem, val); \
212 \
213 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
214 *__mem = __val; \
215 else if (cpu_has_64bits) { \
216 unsigned long __flags; \
217 type __tmp; \
218 \
219 if (irq) \
220 local_irq_save(__flags); \
221 __asm__ __volatile__( \
222 ".set push" "\t\t# __writeq""\n\t" \
223 ".set arch=r4000" "\n\t" \
224 "dsll32 %L0, %L0, 0" "\n\t" \
225 "dsrl32 %L0, %L0, 0" "\n\t" \
226 "dsll32 %M0, %M0, 0" "\n\t" \
227 "or %L0, %L0, %M0" "\n\t" \
228 "sd %L0, %2" "\n\t" \
229 ".set pop" "\n" \
230 : "=r" (__tmp) \
231 : "0" (__val), "m" (*__mem)); \
232 if (irq) \
233 local_irq_restore(__flags); \
234 } else \
235 BUG(); \
236} \
237 \
238static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
239{ \
240 volatile type *__mem; \
241 type __val; \
242 \
243 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
244 \
245 if (barrier) \
246 iobarrier_rw(); \
247 \
248 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
249 __val = *__mem; \
250 else if (cpu_has_64bits) { \
251 unsigned long __flags; \
252 \
253 if (irq) \
254 local_irq_save(__flags); \
255 __asm__ __volatile__( \
256 ".set push" "\t\t# __readq" "\n\t" \
257 ".set arch=r4000" "\n\t" \
258 "ld %L0, %1" "\n\t" \
259 "dsra32 %M0, %L0, 0" "\n\t" \
260 "sll %L0, %L0, 0" "\n\t" \
261 ".set pop" "\n" \
262 : "=r" (__val) \
263 : "m" (*__mem)); \
264 if (irq) \
265 local_irq_restore(__flags); \
266 } else { \
267 __val = 0; \
268 BUG(); \
269 } \
270 \
271 /* prevent prefetching of coherent DMA data prematurely */ \
272 if (!relax) \
273 rmb(); \
274 return pfx##ioswab##bwlq(__mem, __val); \
275}
276
277#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax) \
278 \
279static inline void pfx##out##bwlq(type val, unsigned long port) \
280{ \
281 volatile type *__addr; \
282 type __val; \
283 \
284 if (barrier) \
285 iobarrier_rw(); \
286 else \
287 war_io_reorder_wmb(); \
288 \
289 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
290 \
291 __val = pfx##ioswab##bwlq(__addr, val); \
292 \
293 /* Really, we want this to be atomic */ \
294 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
295 \
296 *__addr = __val; \
297} \
298 \
299static inline type pfx##in##bwlq(unsigned long port) \
300{ \
301 volatile type *__addr; \
302 type __val; \
303 \
304 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
305 \
306 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
307 \
308 if (barrier) \
309 iobarrier_rw(); \
310 \
311 __val = *__addr; \
312 \
313 /* prevent prefetching of coherent DMA data prematurely */ \
314 if (!relax) \
315 rmb(); \
316 return pfx##ioswab##bwlq(__addr, __val); \
317}
318
319#define __BUILD_MEMORY_PFX(bus, bwlq, type, relax) \
320 \
321__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, relax, 1)
322
323#define BUILDIO_MEM(bwlq, type) \
324 \
325__BUILD_MEMORY_PFX(__raw_, bwlq, type, 0) \
326__BUILD_MEMORY_PFX(__relaxed_, bwlq, type, 1) \
327__BUILD_MEMORY_PFX(__mem_, bwlq, type, 0) \
328__BUILD_MEMORY_PFX(, bwlq, type, 0)
329
330BUILDIO_MEM(b, u8)
331BUILDIO_MEM(w, u16)
332BUILDIO_MEM(l, u32)
333#ifdef CONFIG_64BIT
334BUILDIO_MEM(q, u64)
335#else
336__BUILD_MEMORY_PFX(__raw_, q, u64, 0)
337__BUILD_MEMORY_PFX(__mem_, q, u64, 0)
338#endif
339
340#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
341 __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0)
342
343#define BUILDIO_IOPORT(bwlq, type) \
344 __BUILD_IOPORT_PFX(_, bwlq, type) \
345 __BUILD_IOPORT_PFX(__mem_, bwlq, type)
346
347BUILDIO_IOPORT(b, u8)
348BUILDIO_IOPORT(w, u16)
349BUILDIO_IOPORT(l, u32)
350#ifdef CONFIG_64BIT
351BUILDIO_IOPORT(q, u64)
352#endif
353
354#define __BUILDIO(bwlq, type) \
355 \
356__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 1, 0, 0)
357
358__BUILDIO(q, u64)
359
360#define readb_relaxed __relaxed_readb
361#define readw_relaxed __relaxed_readw
362#define readl_relaxed __relaxed_readl
363#ifdef CONFIG_64BIT
364#define readq_relaxed __relaxed_readq
365#endif
366
367#define writeb_relaxed __relaxed_writeb
368#define writew_relaxed __relaxed_writew
369#define writel_relaxed __relaxed_writel
370#ifdef CONFIG_64BIT
371#define writeq_relaxed __relaxed_writeq
372#endif
373
374#define readb_be(addr) \
375 __raw_readb((__force unsigned *)(addr))
376#define readw_be(addr) \
377 be16_to_cpu(__raw_readw((__force unsigned *)(addr)))
378#define readl_be(addr) \
379 be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
380#define readq_be(addr) \
381 be64_to_cpu(__raw_readq((__force unsigned *)(addr)))
382
383#define writeb_be(val, addr) \
384 __raw_writeb((val), (__force unsigned *)(addr))
385#define writew_be(val, addr) \
386 __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr))
387#define writel_be(val, addr) \
388 __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
389#define writeq_be(val, addr) \
390 __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
391
392#define __BUILD_MEMORY_STRING(bwlq, type) \
393 \
394static inline void writes##bwlq(volatile void __iomem *mem, \
395 const void *addr, unsigned int count) \
396{ \
397 const volatile type *__addr = addr; \
398 \
399 while (count--) { \
400 __mem_write##bwlq(*__addr, mem); \
401 __addr++; \
402 } \
403} \
404 \
405static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
406 unsigned int count) \
407{ \
408 volatile type *__addr = addr; \
409 \
410 while (count--) { \
411 *__addr = __mem_read##bwlq(mem); \
412 __addr++; \
413 } \
414}
415
416#define __BUILD_IOPORT_STRING(bwlq, type) \
417 \
418static inline void outs##bwlq(unsigned long port, const void *addr, \
419 unsigned int count) \
420{ \
421 const volatile type *__addr = addr; \
422 \
423 while (count--) { \
424 __mem_out##bwlq(*__addr, port); \
425 __addr++; \
426 } \
427} \
428 \
429static inline void ins##bwlq(unsigned long port, void *addr, \
430 unsigned int count) \
431{ \
432 volatile type *__addr = addr; \
433 \
434 while (count--) { \
435 *__addr = __mem_in##bwlq(port); \
436 __addr++; \
437 } \
438}
439
440#define BUILDSTRING(bwlq, type) \
441 \
442__BUILD_MEMORY_STRING(bwlq, type) \
443__BUILD_IOPORT_STRING(bwlq, type)
444
445BUILDSTRING(b, u8)
446BUILDSTRING(w, u16)
447BUILDSTRING(l, u32)
448#ifdef CONFIG_64BIT
449BUILDSTRING(q, u64)
450#endif
451
452
453/*
454 * The caches on some architectures aren't dma-coherent and have need to
455 * handle this in software. There are three types of operations that
456 * can be applied to dma buffers.
457 *
458 * - dma_cache_wback_inv(start, size) makes caches and coherent by
459 * writing the content of the caches back to memory, if necessary.
460 * The function also invalidates the affected part of the caches as
461 * necessary before DMA transfers from outside to memory.
462 * - dma_cache_wback(start, size) makes caches and coherent by
463 * writing the content of the caches back to memory, if necessary.
464 * The function also invalidates the affected part of the caches as
465 * necessary before DMA transfers from outside to memory.
466 * - dma_cache_inv(start, size) invalidates the affected parts of the
467 * caches. Dirty lines of the caches may be written back or simply
468 * be discarded. This operation is necessary before dma operations
469 * to the memory.
470 *
471 * This API used to be exported; it now is for arch code internal use only.
472 */
473#ifdef CONFIG_DMA_NONCOHERENT
474
475extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
476extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
477extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
478
479#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size)
480#define dma_cache_wback(start, size) _dma_cache_wback(start, size)
481#define dma_cache_inv(start, size) _dma_cache_inv(start, size)
482
483#else /* Sane hardware */
484
485#define dma_cache_wback_inv(start,size) \
486 do { (void) (start); (void) (size); } while (0)
487#define dma_cache_wback(start,size) \
488 do { (void) (start); (void) (size); } while (0)
489#define dma_cache_inv(start,size) \
490 do { (void) (start); (void) (size); } while (0)
491
492#endif /* CONFIG_DMA_NONCOHERENT */
493
494/*
495 * Read a 32-bit register that requires a 64-bit read cycle on the bus.
496 * Avoid interrupt mucking, just adjust the address for 4-byte access.
497 * Assume the addresses are 8-byte aligned.
498 */
499#ifdef __MIPSEB__
500#define __CSR_32_ADJUST 4
501#else
502#define __CSR_32_ADJUST 0
503#endif
504
505#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
506#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
507
508#define __raw_readb __raw_readb
509#define __raw_readw __raw_readw
510#define __raw_readl __raw_readl
511#ifdef CONFIG_64BIT
512#define __raw_readq __raw_readq
513#endif
514#define __raw_writeb __raw_writeb
515#define __raw_writew __raw_writew
516#define __raw_writel __raw_writel
517#ifdef CONFIG_64BIT
518#define __raw_writeq __raw_writeq
519#endif
520
521#define readb readb
522#define readw readw
523#define readl readl
524#ifdef CONFIG_64BIT
525#define readq readq
526#endif
527#define writeb writeb
528#define writew writew
529#define writel writel
530#ifdef CONFIG_64BIT
531#define writeq writeq
532#endif
533
534#define readsb readsb
535#define readsw readsw
536#define readsl readsl
537#ifdef CONFIG_64BIT
538#define readsq readsq
539#endif
540#define writesb writesb
541#define writesw writesw
542#define writesl writesl
543#ifdef CONFIG_64BIT
544#define writesq writesq
545#endif
546
547#define _inb _inb
548#define _inw _inw
549#define _inl _inl
550#define insb insb
551#define insw insw
552#define insl insl
553
554#define _outb _outb
555#define _outw _outw
556#define _outl _outl
557#define outsb outsb
558#define outsw outsw
559#define outsl outsl
560
561void __ioread64_copy(void *to, const void __iomem *from, size_t count);
562
563#include <asm-generic/io.h>
564
565static inline void *isa_bus_to_virt(unsigned long address)
566{
567 return phys_to_virt(address);
568}
569
570#endif /* _ASM_IO_H */
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994, 1995 Waldorf GmbH
7 * Copyright (C) 1994 - 2000, 06 Ralf Baechle
8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
9 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
10 * Author: Maciej W. Rozycki <macro@mips.com>
11 */
12#ifndef _ASM_IO_H
13#define _ASM_IO_H
14
15#include <linux/compiler.h>
16#include <linux/types.h>
17#include <linux/irqflags.h>
18
19#include <asm/addrspace.h>
20#include <asm/barrier.h>
21#include <asm/bug.h>
22#include <asm/byteorder.h>
23#include <asm/cpu.h>
24#include <asm/cpu-features.h>
25#include <asm/page.h>
26#include <asm/pgtable-bits.h>
27#include <asm/string.h>
28#include <mangle-port.h>
29
30/*
31 * Raw operations are never swapped in software. OTOH values that raw
32 * operations are working on may or may not have been swapped by the bus
33 * hardware. An example use would be for flash memory that's used for
34 * execute in place.
35 */
36# define __raw_ioswabb(a, x) (x)
37# define __raw_ioswabw(a, x) (x)
38# define __raw_ioswabl(a, x) (x)
39# define __raw_ioswabq(a, x) (x)
40# define ____raw_ioswabq(a, x) (x)
41
42# define _ioswabb ioswabb
43# define _ioswabw ioswabw
44# define _ioswabl ioswabl
45# define _ioswabq ioswabq
46
47# define __relaxed_ioswabb ioswabb
48# define __relaxed_ioswabw ioswabw
49# define __relaxed_ioswabl ioswabl
50# define __relaxed_ioswabq ioswabq
51
52/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
53
54/*
55 * On MIPS I/O ports are memory mapped, so we access them using normal
56 * load/store instructions. mips_io_port_base is the virtual address to
57 * which all ports are being mapped. For sake of efficiency some code
58 * assumes that this is an address that can be loaded with a single lui
59 * instruction, so the lower 16 bits must be zero. Should be true on
60 * any sane architecture; generic code does not use this assumption.
61 */
62extern unsigned long mips_io_port_base;
63
64static inline void set_io_port_base(unsigned long base)
65{
66 mips_io_port_base = base;
67}
68
69/*
70 * Provide the necessary definitions for generic iomap. We make use of
71 * mips_io_port_base for iomap(), but we don't reserve any low addresses for
72 * use with I/O ports.
73 */
74
75#define HAVE_ARCH_PIO_SIZE
76#define PIO_OFFSET mips_io_port_base
77#define PIO_MASK IO_SPACE_LIMIT
78#define PIO_RESERVED 0x0UL
79
80/*
81 * Enforce in-order execution of data I/O. In the MIPS architecture
82 * these are equivalent to corresponding platform-specific memory
83 * barriers defined in <asm/barrier.h>. API pinched from PowerPC,
84 * with sync additionally defined.
85 */
86#define iobarrier_rw() mb()
87#define iobarrier_r() rmb()
88#define iobarrier_w() wmb()
89#define iobarrier_sync() iob()
90
91/*
92 * virt_to_phys - map virtual addresses to physical
93 * @address: address to remap
94 *
95 * The returned physical address is the physical (CPU) mapping for
96 * the memory address given. It is only valid to use this function on
97 * addresses directly mapped or allocated via kmalloc.
98 *
99 * This function does not give bus mappings for DMA transfers. In
100 * almost all conceivable cases a device driver should not be using
101 * this function
102 */
103static inline unsigned long __virt_to_phys_nodebug(volatile const void *address)
104{
105 return __pa(address);
106}
107
108#ifdef CONFIG_DEBUG_VIRTUAL
109extern phys_addr_t __virt_to_phys(volatile const void *x);
110#else
111#define __virt_to_phys(x) __virt_to_phys_nodebug(x)
112#endif
113
114#define virt_to_phys virt_to_phys
115static inline phys_addr_t virt_to_phys(const volatile void *x)
116{
117 return __virt_to_phys(x);
118}
119
120/*
121 * ISA I/O bus memory addresses are 1:1 with the physical address.
122 */
123static inline unsigned long isa_virt_to_bus(volatile void *address)
124{
125 return virt_to_phys(address);
126}
127
128void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
129 unsigned long prot_val);
130void iounmap(const volatile void __iomem *addr);
131
132/*
133 * ioremap - map bus memory into CPU space
134 * @offset: bus address of the memory
135 * @size: size of the resource to map
136 *
137 * ioremap performs a platform specific sequence of operations to
138 * make bus memory CPU accessible via the readb/readw/readl/writeb/
139 * writew/writel functions and the other mmio helpers. The returned
140 * address is not guaranteed to be usable directly as a virtual
141 * address.
142 */
143#define ioremap(offset, size) \
144 ioremap_prot((offset), (size), _CACHE_UNCACHED)
145
146/*
147 * ioremap_cache - map bus memory into CPU space
148 * @offset: bus address of the memory
149 * @size: size of the resource to map
150 *
151 * ioremap_cache performs a platform specific sequence of operations to
152 * make bus memory CPU accessible via the readb/readw/readl/writeb/
153 * writew/writel functions and the other mmio helpers. The returned
154 * address is not guaranteed to be usable directly as a virtual
155 * address.
156 *
157 * This version of ioremap ensures that the memory is marked cacheable by
158 * the CPU. Also enables full write-combining. Useful for some
159 * memory-like regions on I/O busses.
160 */
161#define ioremap_cache(offset, size) \
162 ioremap_prot((offset), (size), _page_cachable_default)
163
164/*
165 * ioremap_wc - map bus memory into CPU space
166 * @offset: bus address of the memory
167 * @size: size of the resource to map
168 *
169 * ioremap_wc performs a platform specific sequence of operations to
170 * make bus memory CPU accessible via the readb/readw/readl/writeb/
171 * writew/writel functions and the other mmio helpers. The returned
172 * address is not guaranteed to be usable directly as a virtual
173 * address.
174 *
175 * This version of ioremap ensures that the memory is marked uncacheable
176 * but accelerated by means of write-combining feature. It is specifically
177 * useful for PCIe prefetchable windows, which may vastly improve a
178 * communications performance. If it was determined on boot stage, what
179 * CPU CCA doesn't support UCA, the method shall fall-back to the
180 * _CACHE_UNCACHED option (see cpu_probe() method).
181 */
182#define ioremap_wc(offset, size) \
183 ioremap_prot((offset), (size), boot_cpu_data.writecombine)
184
185#if defined(CONFIG_CPU_CAVIUM_OCTEON)
186#define war_io_reorder_wmb() wmb()
187#else
188#define war_io_reorder_wmb() barrier()
189#endif
190
191#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, barrier, relax, irq) \
192 \
193static inline void pfx##write##bwlq(type val, \
194 volatile void __iomem *mem) \
195{ \
196 volatile type *__mem; \
197 type __val; \
198 \
199 if (barrier) \
200 iobarrier_rw(); \
201 else \
202 war_io_reorder_wmb(); \
203 \
204 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
205 \
206 __val = pfx##ioswab##bwlq(__mem, val); \
207 \
208 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
209 *__mem = __val; \
210 else if (cpu_has_64bits) { \
211 unsigned long __flags; \
212 type __tmp; \
213 \
214 if (irq) \
215 local_irq_save(__flags); \
216 __asm__ __volatile__( \
217 ".set push" "\t\t# __writeq""\n\t" \
218 ".set arch=r4000" "\n\t" \
219 "dsll32 %L0, %L0, 0" "\n\t" \
220 "dsrl32 %L0, %L0, 0" "\n\t" \
221 "dsll32 %M0, %M0, 0" "\n\t" \
222 "or %L0, %L0, %M0" "\n\t" \
223 "sd %L0, %2" "\n\t" \
224 ".set pop" "\n" \
225 : "=r" (__tmp) \
226 : "0" (__val), "m" (*__mem)); \
227 if (irq) \
228 local_irq_restore(__flags); \
229 } else \
230 BUG(); \
231} \
232 \
233static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
234{ \
235 volatile type *__mem; \
236 type __val; \
237 \
238 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
239 \
240 if (barrier) \
241 iobarrier_rw(); \
242 \
243 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
244 __val = *__mem; \
245 else if (cpu_has_64bits) { \
246 unsigned long __flags; \
247 \
248 if (irq) \
249 local_irq_save(__flags); \
250 __asm__ __volatile__( \
251 ".set push" "\t\t# __readq" "\n\t" \
252 ".set arch=r4000" "\n\t" \
253 "ld %L0, %1" "\n\t" \
254 "dsra32 %M0, %L0, 0" "\n\t" \
255 "sll %L0, %L0, 0" "\n\t" \
256 ".set pop" "\n" \
257 : "=r" (__val) \
258 : "m" (*__mem)); \
259 if (irq) \
260 local_irq_restore(__flags); \
261 } else { \
262 __val = 0; \
263 BUG(); \
264 } \
265 \
266 /* prevent prefetching of coherent DMA data prematurely */ \
267 if (!relax) \
268 rmb(); \
269 return pfx##ioswab##bwlq(__mem, __val); \
270}
271
272#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax) \
273 \
274static inline void pfx##out##bwlq(type val, unsigned long port) \
275{ \
276 volatile type *__addr; \
277 type __val; \
278 \
279 if (barrier) \
280 iobarrier_rw(); \
281 else \
282 war_io_reorder_wmb(); \
283 \
284 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
285 \
286 __val = pfx##ioswab##bwlq(__addr, val); \
287 \
288 /* Really, we want this to be atomic */ \
289 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
290 \
291 *__addr = __val; \
292} \
293 \
294static inline type pfx##in##bwlq(unsigned long port) \
295{ \
296 volatile type *__addr; \
297 type __val; \
298 \
299 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
300 \
301 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
302 \
303 if (barrier) \
304 iobarrier_rw(); \
305 \
306 __val = *__addr; \
307 \
308 /* prevent prefetching of coherent DMA data prematurely */ \
309 if (!relax) \
310 rmb(); \
311 return pfx##ioswab##bwlq(__addr, __val); \
312}
313
314#define __BUILD_MEMORY_PFX(bus, bwlq, type, relax) \
315 \
316__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, relax, 1)
317
318#define BUILDIO_MEM(bwlq, type) \
319 \
320__BUILD_MEMORY_PFX(__raw_, bwlq, type, 0) \
321__BUILD_MEMORY_PFX(__relaxed_, bwlq, type, 1) \
322__BUILD_MEMORY_PFX(__mem_, bwlq, type, 0) \
323__BUILD_MEMORY_PFX(, bwlq, type, 0)
324
325BUILDIO_MEM(b, u8)
326BUILDIO_MEM(w, u16)
327BUILDIO_MEM(l, u32)
328#ifdef CONFIG_64BIT
329BUILDIO_MEM(q, u64)
330#else
331__BUILD_MEMORY_PFX(__raw_, q, u64, 0)
332__BUILD_MEMORY_PFX(__mem_, q, u64, 0)
333#endif
334
335#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
336 __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0)
337
338#define BUILDIO_IOPORT(bwlq, type) \
339 __BUILD_IOPORT_PFX(_, bwlq, type) \
340 __BUILD_IOPORT_PFX(__mem_, bwlq, type)
341
342BUILDIO_IOPORT(b, u8)
343BUILDIO_IOPORT(w, u16)
344BUILDIO_IOPORT(l, u32)
345#ifdef CONFIG_64BIT
346BUILDIO_IOPORT(q, u64)
347#endif
348
349#define __BUILDIO(bwlq, type) \
350 \
351__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 1, 0, 0)
352
353__BUILDIO(q, u64)
354
355#define readb_relaxed __relaxed_readb
356#define readw_relaxed __relaxed_readw
357#define readl_relaxed __relaxed_readl
358#ifdef CONFIG_64BIT
359#define readq_relaxed __relaxed_readq
360#endif
361
362#define writeb_relaxed __relaxed_writeb
363#define writew_relaxed __relaxed_writew
364#define writel_relaxed __relaxed_writel
365#ifdef CONFIG_64BIT
366#define writeq_relaxed __relaxed_writeq
367#endif
368
369#define readb_be(addr) \
370 __raw_readb((__force unsigned *)(addr))
371#define readw_be(addr) \
372 be16_to_cpu(__raw_readw((__force unsigned *)(addr)))
373#define readl_be(addr) \
374 be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
375#define readq_be(addr) \
376 be64_to_cpu(__raw_readq((__force unsigned *)(addr)))
377
378#define writeb_be(val, addr) \
379 __raw_writeb((val), (__force unsigned *)(addr))
380#define writew_be(val, addr) \
381 __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr))
382#define writel_be(val, addr) \
383 __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
384#define writeq_be(val, addr) \
385 __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
386
387#define __BUILD_MEMORY_STRING(bwlq, type) \
388 \
389static inline void writes##bwlq(volatile void __iomem *mem, \
390 const void *addr, unsigned int count) \
391{ \
392 const volatile type *__addr = addr; \
393 \
394 while (count--) { \
395 __mem_write##bwlq(*__addr, mem); \
396 __addr++; \
397 } \
398} \
399 \
400static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
401 unsigned int count) \
402{ \
403 volatile type *__addr = addr; \
404 \
405 while (count--) { \
406 *__addr = __mem_read##bwlq(mem); \
407 __addr++; \
408 } \
409}
410
411#define __BUILD_IOPORT_STRING(bwlq, type) \
412 \
413static inline void outs##bwlq(unsigned long port, const void *addr, \
414 unsigned int count) \
415{ \
416 const volatile type *__addr = addr; \
417 \
418 while (count--) { \
419 __mem_out##bwlq(*__addr, port); \
420 __addr++; \
421 } \
422} \
423 \
424static inline void ins##bwlq(unsigned long port, void *addr, \
425 unsigned int count) \
426{ \
427 volatile type *__addr = addr; \
428 \
429 while (count--) { \
430 *__addr = __mem_in##bwlq(port); \
431 __addr++; \
432 } \
433}
434
435#define BUILDSTRING(bwlq, type) \
436 \
437__BUILD_MEMORY_STRING(bwlq, type) \
438__BUILD_IOPORT_STRING(bwlq, type)
439
440BUILDSTRING(b, u8)
441BUILDSTRING(w, u16)
442BUILDSTRING(l, u32)
443#ifdef CONFIG_64BIT
444BUILDSTRING(q, u64)
445#endif
446
447
448/*
449 * The caches on some architectures aren't dma-coherent and have need to
450 * handle this in software. There are three types of operations that
451 * can be applied to dma buffers.
452 *
453 * - dma_cache_wback_inv(start, size) makes caches and coherent by
454 * writing the content of the caches back to memory, if necessary.
455 * The function also invalidates the affected part of the caches as
456 * necessary before DMA transfers from outside to memory.
457 * - dma_cache_wback(start, size) makes caches and coherent by
458 * writing the content of the caches back to memory, if necessary.
459 * The function also invalidates the affected part of the caches as
460 * necessary before DMA transfers from outside to memory.
461 * - dma_cache_inv(start, size) invalidates the affected parts of the
462 * caches. Dirty lines of the caches may be written back or simply
463 * be discarded. This operation is necessary before dma operations
464 * to the memory.
465 *
466 * This API used to be exported; it now is for arch code internal use only.
467 */
468#ifdef CONFIG_DMA_NONCOHERENT
469
470extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
471extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
472extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
473
474#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size)
475#define dma_cache_wback(start, size) _dma_cache_wback(start, size)
476#define dma_cache_inv(start, size) _dma_cache_inv(start, size)
477
478#else /* Sane hardware */
479
480#define dma_cache_wback_inv(start,size) \
481 do { (void) (start); (void) (size); } while (0)
482#define dma_cache_wback(start,size) \
483 do { (void) (start); (void) (size); } while (0)
484#define dma_cache_inv(start,size) \
485 do { (void) (start); (void) (size); } while (0)
486
487#endif /* CONFIG_DMA_NONCOHERENT */
488
489/*
490 * Read a 32-bit register that requires a 64-bit read cycle on the bus.
491 * Avoid interrupt mucking, just adjust the address for 4-byte access.
492 * Assume the addresses are 8-byte aligned.
493 */
494#ifdef __MIPSEB__
495#define __CSR_32_ADJUST 4
496#else
497#define __CSR_32_ADJUST 0
498#endif
499
500#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
501#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
502
503#define __raw_readb __raw_readb
504#define __raw_readw __raw_readw
505#define __raw_readl __raw_readl
506#ifdef CONFIG_64BIT
507#define __raw_readq __raw_readq
508#endif
509#define __raw_writeb __raw_writeb
510#define __raw_writew __raw_writew
511#define __raw_writel __raw_writel
512#ifdef CONFIG_64BIT
513#define __raw_writeq __raw_writeq
514#endif
515
516#define readb readb
517#define readw readw
518#define readl readl
519#ifdef CONFIG_64BIT
520#define readq readq
521#endif
522#define writeb writeb
523#define writew writew
524#define writel writel
525#ifdef CONFIG_64BIT
526#define writeq writeq
527#endif
528
529#define readsb readsb
530#define readsw readsw
531#define readsl readsl
532#ifdef CONFIG_64BIT
533#define readsq readsq
534#endif
535#define writesb writesb
536#define writesw writesw
537#define writesl writesl
538#ifdef CONFIG_64BIT
539#define writesq writesq
540#endif
541
542#define _inb _inb
543#define _inw _inw
544#define _inl _inl
545#define insb insb
546#define insw insw
547#define insl insl
548
549#define _outb _outb
550#define _outw _outw
551#define _outl _outl
552#define outsb outsb
553#define outsw outsw
554#define outsl outsl
555
556void __ioread64_copy(void *to, const void __iomem *from, size_t count);
557
558#include <asm-generic/io.h>
559
560static inline void *isa_bus_to_virt(unsigned long address)
561{
562 return phys_to_virt(address);
563}
564
565#endif /* _ASM_IO_H */