Loading...
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994, 1995 Waldorf GmbH
7 * Copyright (C) 1994 - 2000, 06 Ralf Baechle
8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
9 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
10 * Author: Maciej W. Rozycki <macro@mips.com>
11 */
12#ifndef _ASM_IO_H
13#define _ASM_IO_H
14
15#include <linux/compiler.h>
16#include <linux/types.h>
17#include <linux/irqflags.h>
18
19#include <asm/addrspace.h>
20#include <asm/barrier.h>
21#include <asm/bug.h>
22#include <asm/byteorder.h>
23#include <asm/cpu.h>
24#include <asm/cpu-features.h>
25#include <asm/page.h>
26#include <asm/pgtable-bits.h>
27#include <asm/string.h>
28#include <mangle-port.h>
29
30/*
31 * Raw operations are never swapped in software. OTOH values that raw
32 * operations are working on may or may not have been swapped by the bus
33 * hardware. An example use would be for flash memory that's used for
34 * execute in place.
35 */
36# define __raw_ioswabb(a, x) (x)
37# define __raw_ioswabw(a, x) (x)
38# define __raw_ioswabl(a, x) (x)
39# define __raw_ioswabq(a, x) (x)
40# define ____raw_ioswabq(a, x) (x)
41
42# define _ioswabb ioswabb
43# define _ioswabw ioswabw
44# define _ioswabl ioswabl
45# define _ioswabq ioswabq
46
47# define __relaxed_ioswabb ioswabb
48# define __relaxed_ioswabw ioswabw
49# define __relaxed_ioswabl ioswabl
50# define __relaxed_ioswabq ioswabq
51
52/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
53
54/*
55 * On MIPS I/O ports are memory mapped, so we access them using normal
56 * load/store instructions. mips_io_port_base is the virtual address to
57 * which all ports are being mapped. For sake of efficiency some code
58 * assumes that this is an address that can be loaded with a single lui
59 * instruction, so the lower 16 bits must be zero. Should be true on
60 * any sane architecture; generic code does not use this assumption.
61 */
62extern unsigned long mips_io_port_base;
63
64static inline void set_io_port_base(unsigned long base)
65{
66 mips_io_port_base = base;
67}
68
69/*
70 * Provide the necessary definitions for generic iomap. We make use of
71 * mips_io_port_base for iomap(), but we don't reserve any low addresses for
72 * use with I/O ports.
73 */
74
75#define HAVE_ARCH_PIO_SIZE
76#define PIO_OFFSET mips_io_port_base
77#define PIO_MASK IO_SPACE_LIMIT
78#define PIO_RESERVED 0x0UL
79
80/*
81 * Enforce in-order execution of data I/O. In the MIPS architecture
82 * these are equivalent to corresponding platform-specific memory
83 * barriers defined in <asm/barrier.h>. API pinched from PowerPC,
84 * with sync additionally defined.
85 */
86#define iobarrier_rw() mb()
87#define iobarrier_r() rmb()
88#define iobarrier_w() wmb()
89#define iobarrier_sync() iob()
90
91/*
92 * virt_to_phys - map virtual addresses to physical
93 * @address: address to remap
94 *
95 * The returned physical address is the physical (CPU) mapping for
96 * the memory address given. It is only valid to use this function on
97 * addresses directly mapped or allocated via kmalloc.
98 *
99 * This function does not give bus mappings for DMA transfers. In
100 * almost all conceivable cases a device driver should not be using
101 * this function
102 */
103static inline unsigned long __virt_to_phys_nodebug(volatile const void *address)
104{
105 return __pa(address);
106}
107
108#ifdef CONFIG_DEBUG_VIRTUAL
109extern phys_addr_t __virt_to_phys(volatile const void *x);
110#else
111#define __virt_to_phys(x) __virt_to_phys_nodebug(x)
112#endif
113
114#define virt_to_phys virt_to_phys
115static inline phys_addr_t virt_to_phys(const volatile void *x)
116{
117 return __virt_to_phys(x);
118}
119
120/*
121 * ISA I/O bus memory addresses are 1:1 with the physical address.
122 */
123static inline unsigned long isa_virt_to_bus(volatile void *address)
124{
125 return virt_to_phys(address);
126}
127
128/*
129 * Change "struct page" to physical address.
130 */
131#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
132
133void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
134 unsigned long prot_val);
135void iounmap(const volatile void __iomem *addr);
136
137/*
138 * ioremap - map bus memory into CPU space
139 * @offset: bus address of the memory
140 * @size: size of the resource to map
141 *
142 * ioremap performs a platform specific sequence of operations to
143 * make bus memory CPU accessible via the readb/readw/readl/writeb/
144 * writew/writel functions and the other mmio helpers. The returned
145 * address is not guaranteed to be usable directly as a virtual
146 * address.
147 */
148#define ioremap(offset, size) \
149 ioremap_prot((offset), (size), _CACHE_UNCACHED)
150
151/*
152 * ioremap_cache - map bus memory into CPU space
153 * @offset: bus address of the memory
154 * @size: size of the resource to map
155 *
156 * ioremap_cache performs a platform specific sequence of operations to
157 * make bus memory CPU accessible via the readb/readw/readl/writeb/
158 * writew/writel functions and the other mmio helpers. The returned
159 * address is not guaranteed to be usable directly as a virtual
160 * address.
161 *
162 * This version of ioremap ensures that the memory is marked cacheable by
163 * the CPU. Also enables full write-combining. Useful for some
164 * memory-like regions on I/O busses.
165 */
166#define ioremap_cache(offset, size) \
167 ioremap_prot((offset), (size), _page_cachable_default)
168
169/*
170 * ioremap_wc - map bus memory into CPU space
171 * @offset: bus address of the memory
172 * @size: size of the resource to map
173 *
174 * ioremap_wc performs a platform specific sequence of operations to
175 * make bus memory CPU accessible via the readb/readw/readl/writeb/
176 * writew/writel functions and the other mmio helpers. The returned
177 * address is not guaranteed to be usable directly as a virtual
178 * address.
179 *
180 * This version of ioremap ensures that the memory is marked uncacheable
181 * but accelerated by means of write-combining feature. It is specifically
182 * useful for PCIe prefetchable windows, which may vastly improve a
183 * communications performance. If it was determined on boot stage, what
184 * CPU CCA doesn't support UCA, the method shall fall-back to the
185 * _CACHE_UNCACHED option (see cpu_probe() method).
186 */
187#define ioremap_wc(offset, size) \
188 ioremap_prot((offset), (size), boot_cpu_data.writecombine)
189
190#if defined(CONFIG_CPU_CAVIUM_OCTEON)
191#define war_io_reorder_wmb() wmb()
192#else
193#define war_io_reorder_wmb() barrier()
194#endif
195
196#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, barrier, relax, irq) \
197 \
198static inline void pfx##write##bwlq(type val, \
199 volatile void __iomem *mem) \
200{ \
201 volatile type *__mem; \
202 type __val; \
203 \
204 if (barrier) \
205 iobarrier_rw(); \
206 else \
207 war_io_reorder_wmb(); \
208 \
209 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
210 \
211 __val = pfx##ioswab##bwlq(__mem, val); \
212 \
213 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
214 *__mem = __val; \
215 else if (cpu_has_64bits) { \
216 unsigned long __flags; \
217 type __tmp; \
218 \
219 if (irq) \
220 local_irq_save(__flags); \
221 __asm__ __volatile__( \
222 ".set push" "\t\t# __writeq""\n\t" \
223 ".set arch=r4000" "\n\t" \
224 "dsll32 %L0, %L0, 0" "\n\t" \
225 "dsrl32 %L0, %L0, 0" "\n\t" \
226 "dsll32 %M0, %M0, 0" "\n\t" \
227 "or %L0, %L0, %M0" "\n\t" \
228 "sd %L0, %2" "\n\t" \
229 ".set pop" "\n" \
230 : "=r" (__tmp) \
231 : "0" (__val), "m" (*__mem)); \
232 if (irq) \
233 local_irq_restore(__flags); \
234 } else \
235 BUG(); \
236} \
237 \
238static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
239{ \
240 volatile type *__mem; \
241 type __val; \
242 \
243 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
244 \
245 if (barrier) \
246 iobarrier_rw(); \
247 \
248 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
249 __val = *__mem; \
250 else if (cpu_has_64bits) { \
251 unsigned long __flags; \
252 \
253 if (irq) \
254 local_irq_save(__flags); \
255 __asm__ __volatile__( \
256 ".set push" "\t\t# __readq" "\n\t" \
257 ".set arch=r4000" "\n\t" \
258 "ld %L0, %1" "\n\t" \
259 "dsra32 %M0, %L0, 0" "\n\t" \
260 "sll %L0, %L0, 0" "\n\t" \
261 ".set pop" "\n" \
262 : "=r" (__val) \
263 : "m" (*__mem)); \
264 if (irq) \
265 local_irq_restore(__flags); \
266 } else { \
267 __val = 0; \
268 BUG(); \
269 } \
270 \
271 /* prevent prefetching of coherent DMA data prematurely */ \
272 if (!relax) \
273 rmb(); \
274 return pfx##ioswab##bwlq(__mem, __val); \
275}
276
277#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax) \
278 \
279static inline void pfx##out##bwlq(type val, unsigned long port) \
280{ \
281 volatile type *__addr; \
282 type __val; \
283 \
284 if (barrier) \
285 iobarrier_rw(); \
286 else \
287 war_io_reorder_wmb(); \
288 \
289 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
290 \
291 __val = pfx##ioswab##bwlq(__addr, val); \
292 \
293 /* Really, we want this to be atomic */ \
294 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
295 \
296 *__addr = __val; \
297} \
298 \
299static inline type pfx##in##bwlq(unsigned long port) \
300{ \
301 volatile type *__addr; \
302 type __val; \
303 \
304 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
305 \
306 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
307 \
308 if (barrier) \
309 iobarrier_rw(); \
310 \
311 __val = *__addr; \
312 \
313 /* prevent prefetching of coherent DMA data prematurely */ \
314 if (!relax) \
315 rmb(); \
316 return pfx##ioswab##bwlq(__addr, __val); \
317}
318
319#define __BUILD_MEMORY_PFX(bus, bwlq, type, relax) \
320 \
321__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, relax, 1)
322
323#define BUILDIO_MEM(bwlq, type) \
324 \
325__BUILD_MEMORY_PFX(__raw_, bwlq, type, 0) \
326__BUILD_MEMORY_PFX(__relaxed_, bwlq, type, 1) \
327__BUILD_MEMORY_PFX(__mem_, bwlq, type, 0) \
328__BUILD_MEMORY_PFX(, bwlq, type, 0)
329
330BUILDIO_MEM(b, u8)
331BUILDIO_MEM(w, u16)
332BUILDIO_MEM(l, u32)
333#ifdef CONFIG_64BIT
334BUILDIO_MEM(q, u64)
335#else
336__BUILD_MEMORY_PFX(__raw_, q, u64, 0)
337__BUILD_MEMORY_PFX(__mem_, q, u64, 0)
338#endif
339
340#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
341 __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0)
342
343#define BUILDIO_IOPORT(bwlq, type) \
344 __BUILD_IOPORT_PFX(_, bwlq, type) \
345 __BUILD_IOPORT_PFX(__mem_, bwlq, type)
346
347BUILDIO_IOPORT(b, u8)
348BUILDIO_IOPORT(w, u16)
349BUILDIO_IOPORT(l, u32)
350#ifdef CONFIG_64BIT
351BUILDIO_IOPORT(q, u64)
352#endif
353
354#define __BUILDIO(bwlq, type) \
355 \
356__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 1, 0, 0)
357
358__BUILDIO(q, u64)
359
360#define readb_relaxed __relaxed_readb
361#define readw_relaxed __relaxed_readw
362#define readl_relaxed __relaxed_readl
363#ifdef CONFIG_64BIT
364#define readq_relaxed __relaxed_readq
365#endif
366
367#define writeb_relaxed __relaxed_writeb
368#define writew_relaxed __relaxed_writew
369#define writel_relaxed __relaxed_writel
370#ifdef CONFIG_64BIT
371#define writeq_relaxed __relaxed_writeq
372#endif
373
374#define readb_be(addr) \
375 __raw_readb((__force unsigned *)(addr))
376#define readw_be(addr) \
377 be16_to_cpu(__raw_readw((__force unsigned *)(addr)))
378#define readl_be(addr) \
379 be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
380#define readq_be(addr) \
381 be64_to_cpu(__raw_readq((__force unsigned *)(addr)))
382
383#define writeb_be(val, addr) \
384 __raw_writeb((val), (__force unsigned *)(addr))
385#define writew_be(val, addr) \
386 __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr))
387#define writel_be(val, addr) \
388 __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
389#define writeq_be(val, addr) \
390 __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
391
392#define __BUILD_MEMORY_STRING(bwlq, type) \
393 \
394static inline void writes##bwlq(volatile void __iomem *mem, \
395 const void *addr, unsigned int count) \
396{ \
397 const volatile type *__addr = addr; \
398 \
399 while (count--) { \
400 __mem_write##bwlq(*__addr, mem); \
401 __addr++; \
402 } \
403} \
404 \
405static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
406 unsigned int count) \
407{ \
408 volatile type *__addr = addr; \
409 \
410 while (count--) { \
411 *__addr = __mem_read##bwlq(mem); \
412 __addr++; \
413 } \
414}
415
416#define __BUILD_IOPORT_STRING(bwlq, type) \
417 \
418static inline void outs##bwlq(unsigned long port, const void *addr, \
419 unsigned int count) \
420{ \
421 const volatile type *__addr = addr; \
422 \
423 while (count--) { \
424 __mem_out##bwlq(*__addr, port); \
425 __addr++; \
426 } \
427} \
428 \
429static inline void ins##bwlq(unsigned long port, void *addr, \
430 unsigned int count) \
431{ \
432 volatile type *__addr = addr; \
433 \
434 while (count--) { \
435 *__addr = __mem_in##bwlq(port); \
436 __addr++; \
437 } \
438}
439
440#define BUILDSTRING(bwlq, type) \
441 \
442__BUILD_MEMORY_STRING(bwlq, type) \
443__BUILD_IOPORT_STRING(bwlq, type)
444
445BUILDSTRING(b, u8)
446BUILDSTRING(w, u16)
447BUILDSTRING(l, u32)
448#ifdef CONFIG_64BIT
449BUILDSTRING(q, u64)
450#endif
451
452
453/*
454 * The caches on some architectures aren't dma-coherent and have need to
455 * handle this in software. There are three types of operations that
456 * can be applied to dma buffers.
457 *
458 * - dma_cache_wback_inv(start, size) makes caches and coherent by
459 * writing the content of the caches back to memory, if necessary.
460 * The function also invalidates the affected part of the caches as
461 * necessary before DMA transfers from outside to memory.
462 * - dma_cache_wback(start, size) makes caches and coherent by
463 * writing the content of the caches back to memory, if necessary.
464 * The function also invalidates the affected part of the caches as
465 * necessary before DMA transfers from outside to memory.
466 * - dma_cache_inv(start, size) invalidates the affected parts of the
467 * caches. Dirty lines of the caches may be written back or simply
468 * be discarded. This operation is necessary before dma operations
469 * to the memory.
470 *
471 * This API used to be exported; it now is for arch code internal use only.
472 */
473#ifdef CONFIG_DMA_NONCOHERENT
474
475extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
476extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
477extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
478
479#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size)
480#define dma_cache_wback(start, size) _dma_cache_wback(start, size)
481#define dma_cache_inv(start, size) _dma_cache_inv(start, size)
482
483#else /* Sane hardware */
484
485#define dma_cache_wback_inv(start,size) \
486 do { (void) (start); (void) (size); } while (0)
487#define dma_cache_wback(start,size) \
488 do { (void) (start); (void) (size); } while (0)
489#define dma_cache_inv(start,size) \
490 do { (void) (start); (void) (size); } while (0)
491
492#endif /* CONFIG_DMA_NONCOHERENT */
493
494/*
495 * Read a 32-bit register that requires a 64-bit read cycle on the bus.
496 * Avoid interrupt mucking, just adjust the address for 4-byte access.
497 * Assume the addresses are 8-byte aligned.
498 */
499#ifdef __MIPSEB__
500#define __CSR_32_ADJUST 4
501#else
502#define __CSR_32_ADJUST 0
503#endif
504
505#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
506#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
507
508#define __raw_readb __raw_readb
509#define __raw_readw __raw_readw
510#define __raw_readl __raw_readl
511#ifdef CONFIG_64BIT
512#define __raw_readq __raw_readq
513#endif
514#define __raw_writeb __raw_writeb
515#define __raw_writew __raw_writew
516#define __raw_writel __raw_writel
517#ifdef CONFIG_64BIT
518#define __raw_writeq __raw_writeq
519#endif
520
521#define readb readb
522#define readw readw
523#define readl readl
524#ifdef CONFIG_64BIT
525#define readq readq
526#endif
527#define writeb writeb
528#define writew writew
529#define writel writel
530#ifdef CONFIG_64BIT
531#define writeq writeq
532#endif
533
534#define readsb readsb
535#define readsw readsw
536#define readsl readsl
537#ifdef CONFIG_64BIT
538#define readsq readsq
539#endif
540#define writesb writesb
541#define writesw writesw
542#define writesl writesl
543#ifdef CONFIG_64BIT
544#define writesq writesq
545#endif
546
547#define _inb _inb
548#define _inw _inw
549#define _inl _inl
550#define insb insb
551#define insw insw
552#define insl insl
553
554#define _outb _outb
555#define _outw _outw
556#define _outl _outl
557#define outsb outsb
558#define outsw outsw
559#define outsl outsl
560
561void __ioread64_copy(void *to, const void __iomem *from, size_t count);
562
563#include <asm-generic/io.h>
564
565static inline void *isa_bus_to_virt(unsigned long address)
566{
567 return phys_to_virt(address);
568}
569
570#endif /* _ASM_IO_H */
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994, 1995 Waldorf GmbH
7 * Copyright (C) 1994 - 2000, 06 Ralf Baechle
8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
9 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
10 * Author: Maciej W. Rozycki <macro@mips.com>
11 */
12#ifndef _ASM_IO_H
13#define _ASM_IO_H
14
15#define ARCH_HAS_IOREMAP_WC
16
17#include <linux/compiler.h>
18#include <linux/kernel.h>
19#include <linux/types.h>
20#include <linux/irqflags.h>
21
22#include <asm/addrspace.h>
23#include <asm/barrier.h>
24#include <asm/bug.h>
25#include <asm/byteorder.h>
26#include <asm/cpu.h>
27#include <asm/cpu-features.h>
28#include <asm-generic/iomap.h>
29#include <asm/page.h>
30#include <asm/pgtable-bits.h>
31#include <asm/processor.h>
32#include <asm/string.h>
33#include <mangle-port.h>
34
35/*
36 * Raw operations are never swapped in software. OTOH values that raw
37 * operations are working on may or may not have been swapped by the bus
38 * hardware. An example use would be for flash memory that's used for
39 * execute in place.
40 */
41# define __raw_ioswabb(a, x) (x)
42# define __raw_ioswabw(a, x) (x)
43# define __raw_ioswabl(a, x) (x)
44# define __raw_ioswabq(a, x) (x)
45# define ____raw_ioswabq(a, x) (x)
46
47# define __relaxed_ioswabb ioswabb
48# define __relaxed_ioswabw ioswabw
49# define __relaxed_ioswabl ioswabl
50# define __relaxed_ioswabq ioswabq
51
52/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
53
54/*
55 * On MIPS I/O ports are memory mapped, so we access them using normal
56 * load/store instructions. mips_io_port_base is the virtual address to
57 * which all ports are being mapped. For sake of efficiency some code
58 * assumes that this is an address that can be loaded with a single lui
59 * instruction, so the lower 16 bits must be zero. Should be true on
60 * any sane architecture; generic code does not use this assumption.
61 */
62extern unsigned long mips_io_port_base;
63
64static inline void set_io_port_base(unsigned long base)
65{
66 mips_io_port_base = base;
67}
68
69/*
70 * Provide the necessary definitions for generic iomap. We make use of
71 * mips_io_port_base for iomap(), but we don't reserve any low addresses for
72 * use with I/O ports.
73 */
74
75#define HAVE_ARCH_PIO_SIZE
76#define PIO_OFFSET mips_io_port_base
77#define PIO_MASK IO_SPACE_LIMIT
78#define PIO_RESERVED 0x0UL
79
80/*
81 * Enforce in-order execution of data I/O. In the MIPS architecture
82 * these are equivalent to corresponding platform-specific memory
83 * barriers defined in <asm/barrier.h>. API pinched from PowerPC,
84 * with sync additionally defined.
85 */
86#define iobarrier_rw() mb()
87#define iobarrier_r() rmb()
88#define iobarrier_w() wmb()
89#define iobarrier_sync() iob()
90
91/*
92 * virt_to_phys - map virtual addresses to physical
93 * @address: address to remap
94 *
95 * The returned physical address is the physical (CPU) mapping for
96 * the memory address given. It is only valid to use this function on
97 * addresses directly mapped or allocated via kmalloc.
98 *
99 * This function does not give bus mappings for DMA transfers. In
100 * almost all conceivable cases a device driver should not be using
101 * this function
102 */
103static inline unsigned long virt_to_phys(volatile const void *address)
104{
105 return __pa(address);
106}
107
108/*
109 * phys_to_virt - map physical address to virtual
110 * @address: address to remap
111 *
112 * The returned virtual address is a current CPU mapping for
113 * the memory address given. It is only valid to use this function on
114 * addresses that have a kernel mapping
115 *
116 * This function does not handle bus mappings for DMA transfers. In
117 * almost all conceivable cases a device driver should not be using
118 * this function
119 */
120static inline void * phys_to_virt(unsigned long address)
121{
122 return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
123}
124
125/*
126 * ISA I/O bus memory addresses are 1:1 with the physical address.
127 */
128static inline unsigned long isa_virt_to_bus(volatile void *address)
129{
130 return virt_to_phys(address);
131}
132
133static inline void *isa_bus_to_virt(unsigned long address)
134{
135 return phys_to_virt(address);
136}
137
138/*
139 * However PCI ones are not necessarily 1:1 and therefore these interfaces
140 * are forbidden in portable PCI drivers.
141 *
142 * Allow them for x86 for legacy drivers, though.
143 */
144#define virt_to_bus virt_to_phys
145#define bus_to_virt phys_to_virt
146
147/*
148 * Change "struct page" to physical address.
149 */
150#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
151
152void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
153 unsigned long prot_val);
154void iounmap(const volatile void __iomem *addr);
155
156/*
157 * ioremap - map bus memory into CPU space
158 * @offset: bus address of the memory
159 * @size: size of the resource to map
160 *
161 * ioremap performs a platform specific sequence of operations to
162 * make bus memory CPU accessible via the readb/readw/readl/writeb/
163 * writew/writel functions and the other mmio helpers. The returned
164 * address is not guaranteed to be usable directly as a virtual
165 * address.
166 */
167#define ioremap(offset, size) \
168 ioremap_prot((offset), (size), _CACHE_UNCACHED)
169#define ioremap_uc ioremap
170
171/*
172 * ioremap_cache - map bus memory into CPU space
173 * @offset: bus address of the memory
174 * @size: size of the resource to map
175 *
176 * ioremap_cache performs a platform specific sequence of operations to
177 * make bus memory CPU accessible via the readb/readw/readl/writeb/
178 * writew/writel functions and the other mmio helpers. The returned
179 * address is not guaranteed to be usable directly as a virtual
180 * address.
181 *
182 * This version of ioremap ensures that the memory is marked cachable by
183 * the CPU. Also enables full write-combining. Useful for some
184 * memory-like regions on I/O busses.
185 */
186#define ioremap_cache(offset, size) \
187 ioremap_prot((offset), (size), _page_cachable_default)
188
189/*
190 * ioremap_wc - map bus memory into CPU space
191 * @offset: bus address of the memory
192 * @size: size of the resource to map
193 *
194 * ioremap_wc performs a platform specific sequence of operations to
195 * make bus memory CPU accessible via the readb/readw/readl/writeb/
196 * writew/writel functions and the other mmio helpers. The returned
197 * address is not guaranteed to be usable directly as a virtual
198 * address.
199 *
200 * This version of ioremap ensures that the memory is marked uncachable
201 * but accelerated by means of write-combining feature. It is specifically
202 * useful for PCIe prefetchable windows, which may vastly improve a
203 * communications performance. If it was determined on boot stage, what
204 * CPU CCA doesn't support UCA, the method shall fall-back to the
205 * _CACHE_UNCACHED option (see cpu_probe() method).
206 */
207#define ioremap_wc(offset, size) \
208 ioremap_prot((offset), (size), boot_cpu_data.writecombine)
209
210#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64)
211#define war_io_reorder_wmb() wmb()
212#else
213#define war_io_reorder_wmb() barrier()
214#endif
215
216#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, barrier, relax, irq) \
217 \
218static inline void pfx##write##bwlq(type val, \
219 volatile void __iomem *mem) \
220{ \
221 volatile type *__mem; \
222 type __val; \
223 \
224 if (barrier) \
225 iobarrier_rw(); \
226 else \
227 war_io_reorder_wmb(); \
228 \
229 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
230 \
231 __val = pfx##ioswab##bwlq(__mem, val); \
232 \
233 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
234 *__mem = __val; \
235 else if (cpu_has_64bits) { \
236 unsigned long __flags; \
237 type __tmp; \
238 \
239 if (irq) \
240 local_irq_save(__flags); \
241 __asm__ __volatile__( \
242 ".set push" "\t\t# __writeq""\n\t" \
243 ".set arch=r4000" "\n\t" \
244 "dsll32 %L0, %L0, 0" "\n\t" \
245 "dsrl32 %L0, %L0, 0" "\n\t" \
246 "dsll32 %M0, %M0, 0" "\n\t" \
247 "or %L0, %L0, %M0" "\n\t" \
248 "sd %L0, %2" "\n\t" \
249 ".set pop" "\n" \
250 : "=r" (__tmp) \
251 : "0" (__val), "m" (*__mem)); \
252 if (irq) \
253 local_irq_restore(__flags); \
254 } else \
255 BUG(); \
256} \
257 \
258static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
259{ \
260 volatile type *__mem; \
261 type __val; \
262 \
263 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
264 \
265 if (barrier) \
266 iobarrier_rw(); \
267 \
268 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
269 __val = *__mem; \
270 else if (cpu_has_64bits) { \
271 unsigned long __flags; \
272 \
273 if (irq) \
274 local_irq_save(__flags); \
275 __asm__ __volatile__( \
276 ".set push" "\t\t# __readq" "\n\t" \
277 ".set arch=r4000" "\n\t" \
278 "ld %L0, %1" "\n\t" \
279 "dsra32 %M0, %L0, 0" "\n\t" \
280 "sll %L0, %L0, 0" "\n\t" \
281 ".set pop" "\n" \
282 : "=r" (__val) \
283 : "m" (*__mem)); \
284 if (irq) \
285 local_irq_restore(__flags); \
286 } else { \
287 __val = 0; \
288 BUG(); \
289 } \
290 \
291 /* prevent prefetching of coherent DMA data prematurely */ \
292 if (!relax) \
293 rmb(); \
294 return pfx##ioswab##bwlq(__mem, __val); \
295}
296
297#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax, p) \
298 \
299static inline void pfx##out##bwlq##p(type val, unsigned long port) \
300{ \
301 volatile type *__addr; \
302 type __val; \
303 \
304 if (barrier) \
305 iobarrier_rw(); \
306 else \
307 war_io_reorder_wmb(); \
308 \
309 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
310 \
311 __val = pfx##ioswab##bwlq(__addr, val); \
312 \
313 /* Really, we want this to be atomic */ \
314 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
315 \
316 *__addr = __val; \
317} \
318 \
319static inline type pfx##in##bwlq##p(unsigned long port) \
320{ \
321 volatile type *__addr; \
322 type __val; \
323 \
324 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
325 \
326 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
327 \
328 if (barrier) \
329 iobarrier_rw(); \
330 \
331 __val = *__addr; \
332 \
333 /* prevent prefetching of coherent DMA data prematurely */ \
334 if (!relax) \
335 rmb(); \
336 return pfx##ioswab##bwlq(__addr, __val); \
337}
338
339#define __BUILD_MEMORY_PFX(bus, bwlq, type, relax) \
340 \
341__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, relax, 1)
342
343#define BUILDIO_MEM(bwlq, type) \
344 \
345__BUILD_MEMORY_PFX(__raw_, bwlq, type, 0) \
346__BUILD_MEMORY_PFX(__relaxed_, bwlq, type, 1) \
347__BUILD_MEMORY_PFX(__mem_, bwlq, type, 0) \
348__BUILD_MEMORY_PFX(, bwlq, type, 0)
349
350BUILDIO_MEM(b, u8)
351BUILDIO_MEM(w, u16)
352BUILDIO_MEM(l, u32)
353#ifdef CONFIG_64BIT
354BUILDIO_MEM(q, u64)
355#else
356__BUILD_MEMORY_PFX(__raw_, q, u64, 0)
357__BUILD_MEMORY_PFX(__mem_, q, u64, 0)
358#endif
359
360#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
361 __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0,) \
362 __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0, _p)
363
364#define BUILDIO_IOPORT(bwlq, type) \
365 __BUILD_IOPORT_PFX(, bwlq, type) \
366 __BUILD_IOPORT_PFX(__mem_, bwlq, type)
367
368BUILDIO_IOPORT(b, u8)
369BUILDIO_IOPORT(w, u16)
370BUILDIO_IOPORT(l, u32)
371#ifdef CONFIG_64BIT
372BUILDIO_IOPORT(q, u64)
373#endif
374
375#define __BUILDIO(bwlq, type) \
376 \
377__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 1, 0, 0)
378
379__BUILDIO(q, u64)
380
381#define readb_relaxed __relaxed_readb
382#define readw_relaxed __relaxed_readw
383#define readl_relaxed __relaxed_readl
384#ifdef CONFIG_64BIT
385#define readq_relaxed __relaxed_readq
386#endif
387
388#define writeb_relaxed __relaxed_writeb
389#define writew_relaxed __relaxed_writew
390#define writel_relaxed __relaxed_writel
391#ifdef CONFIG_64BIT
392#define writeq_relaxed __relaxed_writeq
393#endif
394
395#define readb_be(addr) \
396 __raw_readb((__force unsigned *)(addr))
397#define readw_be(addr) \
398 be16_to_cpu(__raw_readw((__force unsigned *)(addr)))
399#define readl_be(addr) \
400 be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
401#define readq_be(addr) \
402 be64_to_cpu(__raw_readq((__force unsigned *)(addr)))
403
404#define writeb_be(val, addr) \
405 __raw_writeb((val), (__force unsigned *)(addr))
406#define writew_be(val, addr) \
407 __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr))
408#define writel_be(val, addr) \
409 __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
410#define writeq_be(val, addr) \
411 __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
412
413/*
414 * Some code tests for these symbols
415 */
416#ifdef CONFIG_64BIT
417#define readq readq
418#define writeq writeq
419#endif
420
421#define __BUILD_MEMORY_STRING(bwlq, type) \
422 \
423static inline void writes##bwlq(volatile void __iomem *mem, \
424 const void *addr, unsigned int count) \
425{ \
426 const volatile type *__addr = addr; \
427 \
428 while (count--) { \
429 __mem_write##bwlq(*__addr, mem); \
430 __addr++; \
431 } \
432} \
433 \
434static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
435 unsigned int count) \
436{ \
437 volatile type *__addr = addr; \
438 \
439 while (count--) { \
440 *__addr = __mem_read##bwlq(mem); \
441 __addr++; \
442 } \
443}
444
445#define __BUILD_IOPORT_STRING(bwlq, type) \
446 \
447static inline void outs##bwlq(unsigned long port, const void *addr, \
448 unsigned int count) \
449{ \
450 const volatile type *__addr = addr; \
451 \
452 while (count--) { \
453 __mem_out##bwlq(*__addr, port); \
454 __addr++; \
455 } \
456} \
457 \
458static inline void ins##bwlq(unsigned long port, void *addr, \
459 unsigned int count) \
460{ \
461 volatile type *__addr = addr; \
462 \
463 while (count--) { \
464 *__addr = __mem_in##bwlq(port); \
465 __addr++; \
466 } \
467}
468
469#define BUILDSTRING(bwlq, type) \
470 \
471__BUILD_MEMORY_STRING(bwlq, type) \
472__BUILD_IOPORT_STRING(bwlq, type)
473
474BUILDSTRING(b, u8)
475BUILDSTRING(w, u16)
476BUILDSTRING(l, u32)
477#ifdef CONFIG_64BIT
478BUILDSTRING(q, u64)
479#endif
480
481static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
482{
483 memset((void __force *) addr, val, count);
484}
485static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
486{
487 memcpy(dst, (void __force *) src, count);
488}
489static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
490{
491 memcpy((void __force *) dst, src, count);
492}
493
494/*
495 * The caches on some architectures aren't dma-coherent and have need to
496 * handle this in software. There are three types of operations that
497 * can be applied to dma buffers.
498 *
499 * - dma_cache_wback_inv(start, size) makes caches and coherent by
500 * writing the content of the caches back to memory, if necessary.
501 * The function also invalidates the affected part of the caches as
502 * necessary before DMA transfers from outside to memory.
503 * - dma_cache_wback(start, size) makes caches and coherent by
504 * writing the content of the caches back to memory, if necessary.
505 * The function also invalidates the affected part of the caches as
506 * necessary before DMA transfers from outside to memory.
507 * - dma_cache_inv(start, size) invalidates the affected parts of the
508 * caches. Dirty lines of the caches may be written back or simply
509 * be discarded. This operation is necessary before dma operations
510 * to the memory.
511 *
512 * This API used to be exported; it now is for arch code internal use only.
513 */
514#ifdef CONFIG_DMA_NONCOHERENT
515
516extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
517extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
518extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
519
520#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size)
521#define dma_cache_wback(start, size) _dma_cache_wback(start, size)
522#define dma_cache_inv(start, size) _dma_cache_inv(start, size)
523
524#else /* Sane hardware */
525
526#define dma_cache_wback_inv(start,size) \
527 do { (void) (start); (void) (size); } while (0)
528#define dma_cache_wback(start,size) \
529 do { (void) (start); (void) (size); } while (0)
530#define dma_cache_inv(start,size) \
531 do { (void) (start); (void) (size); } while (0)
532
533#endif /* CONFIG_DMA_NONCOHERENT */
534
535/*
536 * Read a 32-bit register that requires a 64-bit read cycle on the bus.
537 * Avoid interrupt mucking, just adjust the address for 4-byte access.
538 * Assume the addresses are 8-byte aligned.
539 */
540#ifdef __MIPSEB__
541#define __CSR_32_ADJUST 4
542#else
543#define __CSR_32_ADJUST 0
544#endif
545
546#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
547#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
548
549/*
550 * Convert a physical pointer to a virtual kernel pointer for /dev/mem
551 * access
552 */
553#define xlate_dev_mem_ptr(p) __va(p)
554
555/*
556 * Convert a virtual cached pointer to an uncached pointer
557 */
558#define xlate_dev_kmem_ptr(p) p
559
560void __ioread64_copy(void *to, const void __iomem *from, size_t count);
561
562#endif /* _ASM_IO_H */