Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * linux/kernel/power/swap.c
4 *
5 * This file provides functions for reading the suspend image from
6 * and writing it to a swap partition.
7 *
8 * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
9 * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
10 * Copyright (C) 2010-2012 Bojan Smojver <bojan@rexursive.com>
11 */
12
13#define pr_fmt(fmt) "PM: " fmt
14
15#include <linux/module.h>
16#include <linux/file.h>
17#include <linux/delay.h>
18#include <linux/bitops.h>
19#include <linux/device.h>
20#include <linux/bio.h>
21#include <linux/blkdev.h>
22#include <linux/swap.h>
23#include <linux/swapops.h>
24#include <linux/pm.h>
25#include <linux/slab.h>
26#include <linux/lzo.h>
27#include <linux/vmalloc.h>
28#include <linux/cpumask.h>
29#include <linux/atomic.h>
30#include <linux/kthread.h>
31#include <linux/crc32.h>
32#include <linux/ktime.h>
33
34#include "power.h"
35
36#define HIBERNATE_SIG "S1SUSPEND"
37
38u32 swsusp_hardware_signature;
39
40/*
41 * When reading an {un,}compressed image, we may restore pages in place,
42 * in which case some architectures need these pages cleaning before they
43 * can be executed. We don't know which pages these may be, so clean the lot.
44 */
45static bool clean_pages_on_read;
46static bool clean_pages_on_decompress;
47
48/*
49 * The swap map is a data structure used for keeping track of each page
50 * written to a swap partition. It consists of many swap_map_page
51 * structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
52 * These structures are stored on the swap and linked together with the
53 * help of the .next_swap member.
54 *
55 * The swap map is created during suspend. The swap map pages are
56 * allocated and populated one at a time, so we only need one memory
57 * page to set up the entire structure.
58 *
59 * During resume we pick up all swap_map_page structures into a list.
60 */
61
62#define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1)
63
64/*
65 * Number of free pages that are not high.
66 */
67static inline unsigned long low_free_pages(void)
68{
69 return nr_free_pages() - nr_free_highpages();
70}
71
72/*
73 * Number of pages required to be kept free while writing the image. Always
74 * half of all available low pages before the writing starts.
75 */
76static inline unsigned long reqd_free_pages(void)
77{
78 return low_free_pages() / 2;
79}
80
81struct swap_map_page {
82 sector_t entries[MAP_PAGE_ENTRIES];
83 sector_t next_swap;
84};
85
86struct swap_map_page_list {
87 struct swap_map_page *map;
88 struct swap_map_page_list *next;
89};
90
91/*
92 * The swap_map_handle structure is used for handling swap in
93 * a file-alike way
94 */
95
96struct swap_map_handle {
97 struct swap_map_page *cur;
98 struct swap_map_page_list *maps;
99 sector_t cur_swap;
100 sector_t first_sector;
101 unsigned int k;
102 unsigned long reqd_free_pages;
103 u32 crc32;
104};
105
106struct swsusp_header {
107 char reserved[PAGE_SIZE - 20 - sizeof(sector_t) - sizeof(int) -
108 sizeof(u32) - sizeof(u32)];
109 u32 hw_sig;
110 u32 crc32;
111 sector_t image;
112 unsigned int flags; /* Flags to pass to the "boot" kernel */
113 char orig_sig[10];
114 char sig[10];
115} __packed;
116
117static struct swsusp_header *swsusp_header;
118
119/*
120 * The following functions are used for tracing the allocated
121 * swap pages, so that they can be freed in case of an error.
122 */
123
124struct swsusp_extent {
125 struct rb_node node;
126 unsigned long start;
127 unsigned long end;
128};
129
130static struct rb_root swsusp_extents = RB_ROOT;
131
132static int swsusp_extents_insert(unsigned long swap_offset)
133{
134 struct rb_node **new = &(swsusp_extents.rb_node);
135 struct rb_node *parent = NULL;
136 struct swsusp_extent *ext;
137
138 /* Figure out where to put the new node */
139 while (*new) {
140 ext = rb_entry(*new, struct swsusp_extent, node);
141 parent = *new;
142 if (swap_offset < ext->start) {
143 /* Try to merge */
144 if (swap_offset == ext->start - 1) {
145 ext->start--;
146 return 0;
147 }
148 new = &((*new)->rb_left);
149 } else if (swap_offset > ext->end) {
150 /* Try to merge */
151 if (swap_offset == ext->end + 1) {
152 ext->end++;
153 return 0;
154 }
155 new = &((*new)->rb_right);
156 } else {
157 /* It already is in the tree */
158 return -EINVAL;
159 }
160 }
161 /* Add the new node and rebalance the tree. */
162 ext = kzalloc(sizeof(struct swsusp_extent), GFP_KERNEL);
163 if (!ext)
164 return -ENOMEM;
165
166 ext->start = swap_offset;
167 ext->end = swap_offset;
168 rb_link_node(&ext->node, parent, new);
169 rb_insert_color(&ext->node, &swsusp_extents);
170 return 0;
171}
172
173/*
174 * alloc_swapdev_block - allocate a swap page and register that it has
175 * been allocated, so that it can be freed in case of an error.
176 */
177
178sector_t alloc_swapdev_block(int swap)
179{
180 unsigned long offset;
181
182 offset = swp_offset(get_swap_page_of_type(swap));
183 if (offset) {
184 if (swsusp_extents_insert(offset))
185 swap_free(swp_entry(swap, offset));
186 else
187 return swapdev_block(swap, offset);
188 }
189 return 0;
190}
191
192/*
193 * free_all_swap_pages - free swap pages allocated for saving image data.
194 * It also frees the extents used to register which swap entries had been
195 * allocated.
196 */
197
198void free_all_swap_pages(int swap)
199{
200 struct rb_node *node;
201
202 while ((node = swsusp_extents.rb_node)) {
203 struct swsusp_extent *ext;
204 unsigned long offset;
205
206 ext = rb_entry(node, struct swsusp_extent, node);
207 rb_erase(node, &swsusp_extents);
208 for (offset = ext->start; offset <= ext->end; offset++)
209 swap_free(swp_entry(swap, offset));
210
211 kfree(ext);
212 }
213}
214
215int swsusp_swap_in_use(void)
216{
217 return (swsusp_extents.rb_node != NULL);
218}
219
220/*
221 * General things
222 */
223
224static unsigned short root_swap = 0xffff;
225static struct block_device *hib_resume_bdev;
226
227struct hib_bio_batch {
228 atomic_t count;
229 wait_queue_head_t wait;
230 blk_status_t error;
231 struct blk_plug plug;
232};
233
234static void hib_init_batch(struct hib_bio_batch *hb)
235{
236 atomic_set(&hb->count, 0);
237 init_waitqueue_head(&hb->wait);
238 hb->error = BLK_STS_OK;
239 blk_start_plug(&hb->plug);
240}
241
242static void hib_finish_batch(struct hib_bio_batch *hb)
243{
244 blk_finish_plug(&hb->plug);
245}
246
247static void hib_end_io(struct bio *bio)
248{
249 struct hib_bio_batch *hb = bio->bi_private;
250 struct page *page = bio_first_page_all(bio);
251
252 if (bio->bi_status) {
253 pr_alert("Read-error on swap-device (%u:%u:%Lu)\n",
254 MAJOR(bio_dev(bio)), MINOR(bio_dev(bio)),
255 (unsigned long long)bio->bi_iter.bi_sector);
256 }
257
258 if (bio_data_dir(bio) == WRITE)
259 put_page(page);
260 else if (clean_pages_on_read)
261 flush_icache_range((unsigned long)page_address(page),
262 (unsigned long)page_address(page) + PAGE_SIZE);
263
264 if (bio->bi_status && !hb->error)
265 hb->error = bio->bi_status;
266 if (atomic_dec_and_test(&hb->count))
267 wake_up(&hb->wait);
268
269 bio_put(bio);
270}
271
272static int hib_submit_io(blk_opf_t opf, pgoff_t page_off, void *addr,
273 struct hib_bio_batch *hb)
274{
275 struct page *page = virt_to_page(addr);
276 struct bio *bio;
277 int error = 0;
278
279 bio = bio_alloc(hib_resume_bdev, 1, opf, GFP_NOIO | __GFP_HIGH);
280 bio->bi_iter.bi_sector = page_off * (PAGE_SIZE >> 9);
281
282 if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {
283 pr_err("Adding page to bio failed at %llu\n",
284 (unsigned long long)bio->bi_iter.bi_sector);
285 bio_put(bio);
286 return -EFAULT;
287 }
288
289 if (hb) {
290 bio->bi_end_io = hib_end_io;
291 bio->bi_private = hb;
292 atomic_inc(&hb->count);
293 submit_bio(bio);
294 } else {
295 error = submit_bio_wait(bio);
296 bio_put(bio);
297 }
298
299 return error;
300}
301
302static int hib_wait_io(struct hib_bio_batch *hb)
303{
304 /*
305 * We are relying on the behavior of blk_plug that a thread with
306 * a plug will flush the plug list before sleeping.
307 */
308 wait_event(hb->wait, atomic_read(&hb->count) == 0);
309 return blk_status_to_errno(hb->error);
310}
311
312/*
313 * Saving part
314 */
315static int mark_swapfiles(struct swap_map_handle *handle, unsigned int flags)
316{
317 int error;
318
319 hib_submit_io(REQ_OP_READ, swsusp_resume_block, swsusp_header, NULL);
320 if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) ||
321 !memcmp("SWAPSPACE2",swsusp_header->sig, 10)) {
322 memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10);
323 memcpy(swsusp_header->sig, HIBERNATE_SIG, 10);
324 swsusp_header->image = handle->first_sector;
325 if (swsusp_hardware_signature) {
326 swsusp_header->hw_sig = swsusp_hardware_signature;
327 flags |= SF_HW_SIG;
328 }
329 swsusp_header->flags = flags;
330 if (flags & SF_CRC32_MODE)
331 swsusp_header->crc32 = handle->crc32;
332 error = hib_submit_io(REQ_OP_WRITE | REQ_SYNC,
333 swsusp_resume_block, swsusp_header, NULL);
334 } else {
335 pr_err("Swap header not found!\n");
336 error = -ENODEV;
337 }
338 return error;
339}
340
341/**
342 * swsusp_swap_check - check if the resume device is a swap device
343 * and get its index (if so)
344 *
345 * This is called before saving image
346 */
347static int swsusp_swap_check(void)
348{
349 int res;
350
351 if (swsusp_resume_device)
352 res = swap_type_of(swsusp_resume_device, swsusp_resume_block);
353 else
354 res = find_first_swap(&swsusp_resume_device);
355 if (res < 0)
356 return res;
357 root_swap = res;
358
359 hib_resume_bdev = blkdev_get_by_dev(swsusp_resume_device, FMODE_WRITE,
360 NULL);
361 if (IS_ERR(hib_resume_bdev))
362 return PTR_ERR(hib_resume_bdev);
363
364 res = set_blocksize(hib_resume_bdev, PAGE_SIZE);
365 if (res < 0)
366 blkdev_put(hib_resume_bdev, FMODE_WRITE);
367
368 return res;
369}
370
371/**
372 * write_page - Write one page to given swap location.
373 * @buf: Address we're writing.
374 * @offset: Offset of the swap page we're writing to.
375 * @hb: bio completion batch
376 */
377
378static int write_page(void *buf, sector_t offset, struct hib_bio_batch *hb)
379{
380 void *src;
381 int ret;
382
383 if (!offset)
384 return -ENOSPC;
385
386 if (hb) {
387 src = (void *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
388 __GFP_NORETRY);
389 if (src) {
390 copy_page(src, buf);
391 } else {
392 ret = hib_wait_io(hb); /* Free pages */
393 if (ret)
394 return ret;
395 src = (void *)__get_free_page(GFP_NOIO |
396 __GFP_NOWARN |
397 __GFP_NORETRY);
398 if (src) {
399 copy_page(src, buf);
400 } else {
401 WARN_ON_ONCE(1);
402 hb = NULL; /* Go synchronous */
403 src = buf;
404 }
405 }
406 } else {
407 src = buf;
408 }
409 return hib_submit_io(REQ_OP_WRITE | REQ_SYNC, offset, src, hb);
410}
411
412static void release_swap_writer(struct swap_map_handle *handle)
413{
414 if (handle->cur)
415 free_page((unsigned long)handle->cur);
416 handle->cur = NULL;
417}
418
419static int get_swap_writer(struct swap_map_handle *handle)
420{
421 int ret;
422
423 ret = swsusp_swap_check();
424 if (ret) {
425 if (ret != -ENOSPC)
426 pr_err("Cannot find swap device, try swapon -a\n");
427 return ret;
428 }
429 handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL);
430 if (!handle->cur) {
431 ret = -ENOMEM;
432 goto err_close;
433 }
434 handle->cur_swap = alloc_swapdev_block(root_swap);
435 if (!handle->cur_swap) {
436 ret = -ENOSPC;
437 goto err_rel;
438 }
439 handle->k = 0;
440 handle->reqd_free_pages = reqd_free_pages();
441 handle->first_sector = handle->cur_swap;
442 return 0;
443err_rel:
444 release_swap_writer(handle);
445err_close:
446 swsusp_close(FMODE_WRITE);
447 return ret;
448}
449
450static int swap_write_page(struct swap_map_handle *handle, void *buf,
451 struct hib_bio_batch *hb)
452{
453 int error = 0;
454 sector_t offset;
455
456 if (!handle->cur)
457 return -EINVAL;
458 offset = alloc_swapdev_block(root_swap);
459 error = write_page(buf, offset, hb);
460 if (error)
461 return error;
462 handle->cur->entries[handle->k++] = offset;
463 if (handle->k >= MAP_PAGE_ENTRIES) {
464 offset = alloc_swapdev_block(root_swap);
465 if (!offset)
466 return -ENOSPC;
467 handle->cur->next_swap = offset;
468 error = write_page(handle->cur, handle->cur_swap, hb);
469 if (error)
470 goto out;
471 clear_page(handle->cur);
472 handle->cur_swap = offset;
473 handle->k = 0;
474
475 if (hb && low_free_pages() <= handle->reqd_free_pages) {
476 error = hib_wait_io(hb);
477 if (error)
478 goto out;
479 /*
480 * Recalculate the number of required free pages, to
481 * make sure we never take more than half.
482 */
483 handle->reqd_free_pages = reqd_free_pages();
484 }
485 }
486 out:
487 return error;
488}
489
490static int flush_swap_writer(struct swap_map_handle *handle)
491{
492 if (handle->cur && handle->cur_swap)
493 return write_page(handle->cur, handle->cur_swap, NULL);
494 else
495 return -EINVAL;
496}
497
498static int swap_writer_finish(struct swap_map_handle *handle,
499 unsigned int flags, int error)
500{
501 if (!error) {
502 pr_info("S");
503 error = mark_swapfiles(handle, flags);
504 pr_cont("|\n");
505 flush_swap_writer(handle);
506 }
507
508 if (error)
509 free_all_swap_pages(root_swap);
510 release_swap_writer(handle);
511 swsusp_close(FMODE_WRITE);
512
513 return error;
514}
515
516/* We need to remember how much compressed data we need to read. */
517#define LZO_HEADER sizeof(size_t)
518
519/* Number of pages/bytes we'll compress at one time. */
520#define LZO_UNC_PAGES 32
521#define LZO_UNC_SIZE (LZO_UNC_PAGES * PAGE_SIZE)
522
523/* Number of pages/bytes we need for compressed data (worst case). */
524#define LZO_CMP_PAGES DIV_ROUND_UP(lzo1x_worst_compress(LZO_UNC_SIZE) + \
525 LZO_HEADER, PAGE_SIZE)
526#define LZO_CMP_SIZE (LZO_CMP_PAGES * PAGE_SIZE)
527
528/* Maximum number of threads for compression/decompression. */
529#define LZO_THREADS 3
530
531/* Minimum/maximum number of pages for read buffering. */
532#define LZO_MIN_RD_PAGES 1024
533#define LZO_MAX_RD_PAGES 8192
534
535
536/**
537 * save_image - save the suspend image data
538 */
539
540static int save_image(struct swap_map_handle *handle,
541 struct snapshot_handle *snapshot,
542 unsigned int nr_to_write)
543{
544 unsigned int m;
545 int ret;
546 int nr_pages;
547 int err2;
548 struct hib_bio_batch hb;
549 ktime_t start;
550 ktime_t stop;
551
552 hib_init_batch(&hb);
553
554 pr_info("Saving image data pages (%u pages)...\n",
555 nr_to_write);
556 m = nr_to_write / 10;
557 if (!m)
558 m = 1;
559 nr_pages = 0;
560 start = ktime_get();
561 while (1) {
562 ret = snapshot_read_next(snapshot);
563 if (ret <= 0)
564 break;
565 ret = swap_write_page(handle, data_of(*snapshot), &hb);
566 if (ret)
567 break;
568 if (!(nr_pages % m))
569 pr_info("Image saving progress: %3d%%\n",
570 nr_pages / m * 10);
571 nr_pages++;
572 }
573 err2 = hib_wait_io(&hb);
574 hib_finish_batch(&hb);
575 stop = ktime_get();
576 if (!ret)
577 ret = err2;
578 if (!ret)
579 pr_info("Image saving done\n");
580 swsusp_show_speed(start, stop, nr_to_write, "Wrote");
581 return ret;
582}
583
584/**
585 * Structure used for CRC32.
586 */
587struct crc_data {
588 struct task_struct *thr; /* thread */
589 atomic_t ready; /* ready to start flag */
590 atomic_t stop; /* ready to stop flag */
591 unsigned run_threads; /* nr current threads */
592 wait_queue_head_t go; /* start crc update */
593 wait_queue_head_t done; /* crc update done */
594 u32 *crc32; /* points to handle's crc32 */
595 size_t *unc_len[LZO_THREADS]; /* uncompressed lengths */
596 unsigned char *unc[LZO_THREADS]; /* uncompressed data */
597};
598
599/**
600 * CRC32 update function that runs in its own thread.
601 */
602static int crc32_threadfn(void *data)
603{
604 struct crc_data *d = data;
605 unsigned i;
606
607 while (1) {
608 wait_event(d->go, atomic_read(&d->ready) ||
609 kthread_should_stop());
610 if (kthread_should_stop()) {
611 d->thr = NULL;
612 atomic_set(&d->stop, 1);
613 wake_up(&d->done);
614 break;
615 }
616 atomic_set(&d->ready, 0);
617
618 for (i = 0; i < d->run_threads; i++)
619 *d->crc32 = crc32_le(*d->crc32,
620 d->unc[i], *d->unc_len[i]);
621 atomic_set(&d->stop, 1);
622 wake_up(&d->done);
623 }
624 return 0;
625}
626/**
627 * Structure used for LZO data compression.
628 */
629struct cmp_data {
630 struct task_struct *thr; /* thread */
631 atomic_t ready; /* ready to start flag */
632 atomic_t stop; /* ready to stop flag */
633 int ret; /* return code */
634 wait_queue_head_t go; /* start compression */
635 wait_queue_head_t done; /* compression done */
636 size_t unc_len; /* uncompressed length */
637 size_t cmp_len; /* compressed length */
638 unsigned char unc[LZO_UNC_SIZE]; /* uncompressed buffer */
639 unsigned char cmp[LZO_CMP_SIZE]; /* compressed buffer */
640 unsigned char wrk[LZO1X_1_MEM_COMPRESS]; /* compression workspace */
641};
642
643/**
644 * Compression function that runs in its own thread.
645 */
646static int lzo_compress_threadfn(void *data)
647{
648 struct cmp_data *d = data;
649
650 while (1) {
651 wait_event(d->go, atomic_read(&d->ready) ||
652 kthread_should_stop());
653 if (kthread_should_stop()) {
654 d->thr = NULL;
655 d->ret = -1;
656 atomic_set(&d->stop, 1);
657 wake_up(&d->done);
658 break;
659 }
660 atomic_set(&d->ready, 0);
661
662 d->ret = lzo1x_1_compress(d->unc, d->unc_len,
663 d->cmp + LZO_HEADER, &d->cmp_len,
664 d->wrk);
665 atomic_set(&d->stop, 1);
666 wake_up(&d->done);
667 }
668 return 0;
669}
670
671/**
672 * save_image_lzo - Save the suspend image data compressed with LZO.
673 * @handle: Swap map handle to use for saving the image.
674 * @snapshot: Image to read data from.
675 * @nr_to_write: Number of pages to save.
676 */
677static int save_image_lzo(struct swap_map_handle *handle,
678 struct snapshot_handle *snapshot,
679 unsigned int nr_to_write)
680{
681 unsigned int m;
682 int ret = 0;
683 int nr_pages;
684 int err2;
685 struct hib_bio_batch hb;
686 ktime_t start;
687 ktime_t stop;
688 size_t off;
689 unsigned thr, run_threads, nr_threads;
690 unsigned char *page = NULL;
691 struct cmp_data *data = NULL;
692 struct crc_data *crc = NULL;
693
694 hib_init_batch(&hb);
695
696 /*
697 * We'll limit the number of threads for compression to limit memory
698 * footprint.
699 */
700 nr_threads = num_online_cpus() - 1;
701 nr_threads = clamp_val(nr_threads, 1, LZO_THREADS);
702
703 page = (void *)__get_free_page(GFP_NOIO | __GFP_HIGH);
704 if (!page) {
705 pr_err("Failed to allocate LZO page\n");
706 ret = -ENOMEM;
707 goto out_clean;
708 }
709
710 data = vzalloc(array_size(nr_threads, sizeof(*data)));
711 if (!data) {
712 pr_err("Failed to allocate LZO data\n");
713 ret = -ENOMEM;
714 goto out_clean;
715 }
716
717 crc = kzalloc(sizeof(*crc), GFP_KERNEL);
718 if (!crc) {
719 pr_err("Failed to allocate crc\n");
720 ret = -ENOMEM;
721 goto out_clean;
722 }
723
724 /*
725 * Start the compression threads.
726 */
727 for (thr = 0; thr < nr_threads; thr++) {
728 init_waitqueue_head(&data[thr].go);
729 init_waitqueue_head(&data[thr].done);
730
731 data[thr].thr = kthread_run(lzo_compress_threadfn,
732 &data[thr],
733 "image_compress/%u", thr);
734 if (IS_ERR(data[thr].thr)) {
735 data[thr].thr = NULL;
736 pr_err("Cannot start compression threads\n");
737 ret = -ENOMEM;
738 goto out_clean;
739 }
740 }
741
742 /*
743 * Start the CRC32 thread.
744 */
745 init_waitqueue_head(&crc->go);
746 init_waitqueue_head(&crc->done);
747
748 handle->crc32 = 0;
749 crc->crc32 = &handle->crc32;
750 for (thr = 0; thr < nr_threads; thr++) {
751 crc->unc[thr] = data[thr].unc;
752 crc->unc_len[thr] = &data[thr].unc_len;
753 }
754
755 crc->thr = kthread_run(crc32_threadfn, crc, "image_crc32");
756 if (IS_ERR(crc->thr)) {
757 crc->thr = NULL;
758 pr_err("Cannot start CRC32 thread\n");
759 ret = -ENOMEM;
760 goto out_clean;
761 }
762
763 /*
764 * Adjust the number of required free pages after all allocations have
765 * been done. We don't want to run out of pages when writing.
766 */
767 handle->reqd_free_pages = reqd_free_pages();
768
769 pr_info("Using %u thread(s) for compression\n", nr_threads);
770 pr_info("Compressing and saving image data (%u pages)...\n",
771 nr_to_write);
772 m = nr_to_write / 10;
773 if (!m)
774 m = 1;
775 nr_pages = 0;
776 start = ktime_get();
777 for (;;) {
778 for (thr = 0; thr < nr_threads; thr++) {
779 for (off = 0; off < LZO_UNC_SIZE; off += PAGE_SIZE) {
780 ret = snapshot_read_next(snapshot);
781 if (ret < 0)
782 goto out_finish;
783
784 if (!ret)
785 break;
786
787 memcpy(data[thr].unc + off,
788 data_of(*snapshot), PAGE_SIZE);
789
790 if (!(nr_pages % m))
791 pr_info("Image saving progress: %3d%%\n",
792 nr_pages / m * 10);
793 nr_pages++;
794 }
795 if (!off)
796 break;
797
798 data[thr].unc_len = off;
799
800 atomic_set(&data[thr].ready, 1);
801 wake_up(&data[thr].go);
802 }
803
804 if (!thr)
805 break;
806
807 crc->run_threads = thr;
808 atomic_set(&crc->ready, 1);
809 wake_up(&crc->go);
810
811 for (run_threads = thr, thr = 0; thr < run_threads; thr++) {
812 wait_event(data[thr].done,
813 atomic_read(&data[thr].stop));
814 atomic_set(&data[thr].stop, 0);
815
816 ret = data[thr].ret;
817
818 if (ret < 0) {
819 pr_err("LZO compression failed\n");
820 goto out_finish;
821 }
822
823 if (unlikely(!data[thr].cmp_len ||
824 data[thr].cmp_len >
825 lzo1x_worst_compress(data[thr].unc_len))) {
826 pr_err("Invalid LZO compressed length\n");
827 ret = -1;
828 goto out_finish;
829 }
830
831 *(size_t *)data[thr].cmp = data[thr].cmp_len;
832
833 /*
834 * Given we are writing one page at a time to disk, we
835 * copy that much from the buffer, although the last
836 * bit will likely be smaller than full page. This is
837 * OK - we saved the length of the compressed data, so
838 * any garbage at the end will be discarded when we
839 * read it.
840 */
841 for (off = 0;
842 off < LZO_HEADER + data[thr].cmp_len;
843 off += PAGE_SIZE) {
844 memcpy(page, data[thr].cmp + off, PAGE_SIZE);
845
846 ret = swap_write_page(handle, page, &hb);
847 if (ret)
848 goto out_finish;
849 }
850 }
851
852 wait_event(crc->done, atomic_read(&crc->stop));
853 atomic_set(&crc->stop, 0);
854 }
855
856out_finish:
857 err2 = hib_wait_io(&hb);
858 stop = ktime_get();
859 if (!ret)
860 ret = err2;
861 if (!ret)
862 pr_info("Image saving done\n");
863 swsusp_show_speed(start, stop, nr_to_write, "Wrote");
864out_clean:
865 hib_finish_batch(&hb);
866 if (crc) {
867 if (crc->thr)
868 kthread_stop(crc->thr);
869 kfree(crc);
870 }
871 if (data) {
872 for (thr = 0; thr < nr_threads; thr++)
873 if (data[thr].thr)
874 kthread_stop(data[thr].thr);
875 vfree(data);
876 }
877 if (page) free_page((unsigned long)page);
878
879 return ret;
880}
881
882/**
883 * enough_swap - Make sure we have enough swap to save the image.
884 *
885 * Returns TRUE or FALSE after checking the total amount of swap
886 * space available from the resume partition.
887 */
888
889static int enough_swap(unsigned int nr_pages)
890{
891 unsigned int free_swap = count_swap_pages(root_swap, 1);
892 unsigned int required;
893
894 pr_debug("Free swap pages: %u\n", free_swap);
895
896 required = PAGES_FOR_IO + nr_pages;
897 return free_swap > required;
898}
899
900/**
901 * swsusp_write - Write entire image and metadata.
902 * @flags: flags to pass to the "boot" kernel in the image header
903 *
904 * It is important _NOT_ to umount filesystems at this point. We want
905 * them synced (in case something goes wrong) but we DO not want to mark
906 * filesystem clean: it is not. (And it does not matter, if we resume
907 * correctly, we'll mark system clean, anyway.)
908 */
909
910int swsusp_write(unsigned int flags)
911{
912 struct swap_map_handle handle;
913 struct snapshot_handle snapshot;
914 struct swsusp_info *header;
915 unsigned long pages;
916 int error;
917
918 pages = snapshot_get_image_size();
919 error = get_swap_writer(&handle);
920 if (error) {
921 pr_err("Cannot get swap writer\n");
922 return error;
923 }
924 if (flags & SF_NOCOMPRESS_MODE) {
925 if (!enough_swap(pages)) {
926 pr_err("Not enough free swap\n");
927 error = -ENOSPC;
928 goto out_finish;
929 }
930 }
931 memset(&snapshot, 0, sizeof(struct snapshot_handle));
932 error = snapshot_read_next(&snapshot);
933 if (error < (int)PAGE_SIZE) {
934 if (error >= 0)
935 error = -EFAULT;
936
937 goto out_finish;
938 }
939 header = (struct swsusp_info *)data_of(snapshot);
940 error = swap_write_page(&handle, header, NULL);
941 if (!error) {
942 error = (flags & SF_NOCOMPRESS_MODE) ?
943 save_image(&handle, &snapshot, pages - 1) :
944 save_image_lzo(&handle, &snapshot, pages - 1);
945 }
946out_finish:
947 error = swap_writer_finish(&handle, flags, error);
948 return error;
949}
950
951/**
952 * The following functions allow us to read data using a swap map
953 * in a file-alike way
954 */
955
956static void release_swap_reader(struct swap_map_handle *handle)
957{
958 struct swap_map_page_list *tmp;
959
960 while (handle->maps) {
961 if (handle->maps->map)
962 free_page((unsigned long)handle->maps->map);
963 tmp = handle->maps;
964 handle->maps = handle->maps->next;
965 kfree(tmp);
966 }
967 handle->cur = NULL;
968}
969
970static int get_swap_reader(struct swap_map_handle *handle,
971 unsigned int *flags_p)
972{
973 int error;
974 struct swap_map_page_list *tmp, *last;
975 sector_t offset;
976
977 *flags_p = swsusp_header->flags;
978
979 if (!swsusp_header->image) /* how can this happen? */
980 return -EINVAL;
981
982 handle->cur = NULL;
983 last = handle->maps = NULL;
984 offset = swsusp_header->image;
985 while (offset) {
986 tmp = kzalloc(sizeof(*handle->maps), GFP_KERNEL);
987 if (!tmp) {
988 release_swap_reader(handle);
989 return -ENOMEM;
990 }
991 if (!handle->maps)
992 handle->maps = tmp;
993 if (last)
994 last->next = tmp;
995 last = tmp;
996
997 tmp->map = (struct swap_map_page *)
998 __get_free_page(GFP_NOIO | __GFP_HIGH);
999 if (!tmp->map) {
1000 release_swap_reader(handle);
1001 return -ENOMEM;
1002 }
1003
1004 error = hib_submit_io(REQ_OP_READ, offset, tmp->map, NULL);
1005 if (error) {
1006 release_swap_reader(handle);
1007 return error;
1008 }
1009 offset = tmp->map->next_swap;
1010 }
1011 handle->k = 0;
1012 handle->cur = handle->maps->map;
1013 return 0;
1014}
1015
1016static int swap_read_page(struct swap_map_handle *handle, void *buf,
1017 struct hib_bio_batch *hb)
1018{
1019 sector_t offset;
1020 int error;
1021 struct swap_map_page_list *tmp;
1022
1023 if (!handle->cur)
1024 return -EINVAL;
1025 offset = handle->cur->entries[handle->k];
1026 if (!offset)
1027 return -EFAULT;
1028 error = hib_submit_io(REQ_OP_READ, offset, buf, hb);
1029 if (error)
1030 return error;
1031 if (++handle->k >= MAP_PAGE_ENTRIES) {
1032 handle->k = 0;
1033 free_page((unsigned long)handle->maps->map);
1034 tmp = handle->maps;
1035 handle->maps = handle->maps->next;
1036 kfree(tmp);
1037 if (!handle->maps)
1038 release_swap_reader(handle);
1039 else
1040 handle->cur = handle->maps->map;
1041 }
1042 return error;
1043}
1044
1045static int swap_reader_finish(struct swap_map_handle *handle)
1046{
1047 release_swap_reader(handle);
1048
1049 return 0;
1050}
1051
1052/**
1053 * load_image - load the image using the swap map handle
1054 * @handle and the snapshot handle @snapshot
1055 * (assume there are @nr_pages pages to load)
1056 */
1057
1058static int load_image(struct swap_map_handle *handle,
1059 struct snapshot_handle *snapshot,
1060 unsigned int nr_to_read)
1061{
1062 unsigned int m;
1063 int ret = 0;
1064 ktime_t start;
1065 ktime_t stop;
1066 struct hib_bio_batch hb;
1067 int err2;
1068 unsigned nr_pages;
1069
1070 hib_init_batch(&hb);
1071
1072 clean_pages_on_read = true;
1073 pr_info("Loading image data pages (%u pages)...\n", nr_to_read);
1074 m = nr_to_read / 10;
1075 if (!m)
1076 m = 1;
1077 nr_pages = 0;
1078 start = ktime_get();
1079 for ( ; ; ) {
1080 ret = snapshot_write_next(snapshot);
1081 if (ret <= 0)
1082 break;
1083 ret = swap_read_page(handle, data_of(*snapshot), &hb);
1084 if (ret)
1085 break;
1086 if (snapshot->sync_read)
1087 ret = hib_wait_io(&hb);
1088 if (ret)
1089 break;
1090 if (!(nr_pages % m))
1091 pr_info("Image loading progress: %3d%%\n",
1092 nr_pages / m * 10);
1093 nr_pages++;
1094 }
1095 err2 = hib_wait_io(&hb);
1096 hib_finish_batch(&hb);
1097 stop = ktime_get();
1098 if (!ret)
1099 ret = err2;
1100 if (!ret) {
1101 pr_info("Image loading done\n");
1102 snapshot_write_finalize(snapshot);
1103 if (!snapshot_image_loaded(snapshot))
1104 ret = -ENODATA;
1105 }
1106 swsusp_show_speed(start, stop, nr_to_read, "Read");
1107 return ret;
1108}
1109
1110/**
1111 * Structure used for LZO data decompression.
1112 */
1113struct dec_data {
1114 struct task_struct *thr; /* thread */
1115 atomic_t ready; /* ready to start flag */
1116 atomic_t stop; /* ready to stop flag */
1117 int ret; /* return code */
1118 wait_queue_head_t go; /* start decompression */
1119 wait_queue_head_t done; /* decompression done */
1120 size_t unc_len; /* uncompressed length */
1121 size_t cmp_len; /* compressed length */
1122 unsigned char unc[LZO_UNC_SIZE]; /* uncompressed buffer */
1123 unsigned char cmp[LZO_CMP_SIZE]; /* compressed buffer */
1124};
1125
1126/**
1127 * Decompression function that runs in its own thread.
1128 */
1129static int lzo_decompress_threadfn(void *data)
1130{
1131 struct dec_data *d = data;
1132
1133 while (1) {
1134 wait_event(d->go, atomic_read(&d->ready) ||
1135 kthread_should_stop());
1136 if (kthread_should_stop()) {
1137 d->thr = NULL;
1138 d->ret = -1;
1139 atomic_set(&d->stop, 1);
1140 wake_up(&d->done);
1141 break;
1142 }
1143 atomic_set(&d->ready, 0);
1144
1145 d->unc_len = LZO_UNC_SIZE;
1146 d->ret = lzo1x_decompress_safe(d->cmp + LZO_HEADER, d->cmp_len,
1147 d->unc, &d->unc_len);
1148 if (clean_pages_on_decompress)
1149 flush_icache_range((unsigned long)d->unc,
1150 (unsigned long)d->unc + d->unc_len);
1151
1152 atomic_set(&d->stop, 1);
1153 wake_up(&d->done);
1154 }
1155 return 0;
1156}
1157
1158/**
1159 * load_image_lzo - Load compressed image data and decompress them with LZO.
1160 * @handle: Swap map handle to use for loading data.
1161 * @snapshot: Image to copy uncompressed data into.
1162 * @nr_to_read: Number of pages to load.
1163 */
1164static int load_image_lzo(struct swap_map_handle *handle,
1165 struct snapshot_handle *snapshot,
1166 unsigned int nr_to_read)
1167{
1168 unsigned int m;
1169 int ret = 0;
1170 int eof = 0;
1171 struct hib_bio_batch hb;
1172 ktime_t start;
1173 ktime_t stop;
1174 unsigned nr_pages;
1175 size_t off;
1176 unsigned i, thr, run_threads, nr_threads;
1177 unsigned ring = 0, pg = 0, ring_size = 0,
1178 have = 0, want, need, asked = 0;
1179 unsigned long read_pages = 0;
1180 unsigned char **page = NULL;
1181 struct dec_data *data = NULL;
1182 struct crc_data *crc = NULL;
1183
1184 hib_init_batch(&hb);
1185
1186 /*
1187 * We'll limit the number of threads for decompression to limit memory
1188 * footprint.
1189 */
1190 nr_threads = num_online_cpus() - 1;
1191 nr_threads = clamp_val(nr_threads, 1, LZO_THREADS);
1192
1193 page = vmalloc(array_size(LZO_MAX_RD_PAGES, sizeof(*page)));
1194 if (!page) {
1195 pr_err("Failed to allocate LZO page\n");
1196 ret = -ENOMEM;
1197 goto out_clean;
1198 }
1199
1200 data = vzalloc(array_size(nr_threads, sizeof(*data)));
1201 if (!data) {
1202 pr_err("Failed to allocate LZO data\n");
1203 ret = -ENOMEM;
1204 goto out_clean;
1205 }
1206
1207 crc = kzalloc(sizeof(*crc), GFP_KERNEL);
1208 if (!crc) {
1209 pr_err("Failed to allocate crc\n");
1210 ret = -ENOMEM;
1211 goto out_clean;
1212 }
1213
1214 clean_pages_on_decompress = true;
1215
1216 /*
1217 * Start the decompression threads.
1218 */
1219 for (thr = 0; thr < nr_threads; thr++) {
1220 init_waitqueue_head(&data[thr].go);
1221 init_waitqueue_head(&data[thr].done);
1222
1223 data[thr].thr = kthread_run(lzo_decompress_threadfn,
1224 &data[thr],
1225 "image_decompress/%u", thr);
1226 if (IS_ERR(data[thr].thr)) {
1227 data[thr].thr = NULL;
1228 pr_err("Cannot start decompression threads\n");
1229 ret = -ENOMEM;
1230 goto out_clean;
1231 }
1232 }
1233
1234 /*
1235 * Start the CRC32 thread.
1236 */
1237 init_waitqueue_head(&crc->go);
1238 init_waitqueue_head(&crc->done);
1239
1240 handle->crc32 = 0;
1241 crc->crc32 = &handle->crc32;
1242 for (thr = 0; thr < nr_threads; thr++) {
1243 crc->unc[thr] = data[thr].unc;
1244 crc->unc_len[thr] = &data[thr].unc_len;
1245 }
1246
1247 crc->thr = kthread_run(crc32_threadfn, crc, "image_crc32");
1248 if (IS_ERR(crc->thr)) {
1249 crc->thr = NULL;
1250 pr_err("Cannot start CRC32 thread\n");
1251 ret = -ENOMEM;
1252 goto out_clean;
1253 }
1254
1255 /*
1256 * Set the number of pages for read buffering.
1257 * This is complete guesswork, because we'll only know the real
1258 * picture once prepare_image() is called, which is much later on
1259 * during the image load phase. We'll assume the worst case and
1260 * say that none of the image pages are from high memory.
1261 */
1262 if (low_free_pages() > snapshot_get_image_size())
1263 read_pages = (low_free_pages() - snapshot_get_image_size()) / 2;
1264 read_pages = clamp_val(read_pages, LZO_MIN_RD_PAGES, LZO_MAX_RD_PAGES);
1265
1266 for (i = 0; i < read_pages; i++) {
1267 page[i] = (void *)__get_free_page(i < LZO_CMP_PAGES ?
1268 GFP_NOIO | __GFP_HIGH :
1269 GFP_NOIO | __GFP_NOWARN |
1270 __GFP_NORETRY);
1271
1272 if (!page[i]) {
1273 if (i < LZO_CMP_PAGES) {
1274 ring_size = i;
1275 pr_err("Failed to allocate LZO pages\n");
1276 ret = -ENOMEM;
1277 goto out_clean;
1278 } else {
1279 break;
1280 }
1281 }
1282 }
1283 want = ring_size = i;
1284
1285 pr_info("Using %u thread(s) for decompression\n", nr_threads);
1286 pr_info("Loading and decompressing image data (%u pages)...\n",
1287 nr_to_read);
1288 m = nr_to_read / 10;
1289 if (!m)
1290 m = 1;
1291 nr_pages = 0;
1292 start = ktime_get();
1293
1294 ret = snapshot_write_next(snapshot);
1295 if (ret <= 0)
1296 goto out_finish;
1297
1298 for(;;) {
1299 for (i = 0; !eof && i < want; i++) {
1300 ret = swap_read_page(handle, page[ring], &hb);
1301 if (ret) {
1302 /*
1303 * On real read error, finish. On end of data,
1304 * set EOF flag and just exit the read loop.
1305 */
1306 if (handle->cur &&
1307 handle->cur->entries[handle->k]) {
1308 goto out_finish;
1309 } else {
1310 eof = 1;
1311 break;
1312 }
1313 }
1314 if (++ring >= ring_size)
1315 ring = 0;
1316 }
1317 asked += i;
1318 want -= i;
1319
1320 /*
1321 * We are out of data, wait for some more.
1322 */
1323 if (!have) {
1324 if (!asked)
1325 break;
1326
1327 ret = hib_wait_io(&hb);
1328 if (ret)
1329 goto out_finish;
1330 have += asked;
1331 asked = 0;
1332 if (eof)
1333 eof = 2;
1334 }
1335
1336 if (crc->run_threads) {
1337 wait_event(crc->done, atomic_read(&crc->stop));
1338 atomic_set(&crc->stop, 0);
1339 crc->run_threads = 0;
1340 }
1341
1342 for (thr = 0; have && thr < nr_threads; thr++) {
1343 data[thr].cmp_len = *(size_t *)page[pg];
1344 if (unlikely(!data[thr].cmp_len ||
1345 data[thr].cmp_len >
1346 lzo1x_worst_compress(LZO_UNC_SIZE))) {
1347 pr_err("Invalid LZO compressed length\n");
1348 ret = -1;
1349 goto out_finish;
1350 }
1351
1352 need = DIV_ROUND_UP(data[thr].cmp_len + LZO_HEADER,
1353 PAGE_SIZE);
1354 if (need > have) {
1355 if (eof > 1) {
1356 ret = -1;
1357 goto out_finish;
1358 }
1359 break;
1360 }
1361
1362 for (off = 0;
1363 off < LZO_HEADER + data[thr].cmp_len;
1364 off += PAGE_SIZE) {
1365 memcpy(data[thr].cmp + off,
1366 page[pg], PAGE_SIZE);
1367 have--;
1368 want++;
1369 if (++pg >= ring_size)
1370 pg = 0;
1371 }
1372
1373 atomic_set(&data[thr].ready, 1);
1374 wake_up(&data[thr].go);
1375 }
1376
1377 /*
1378 * Wait for more data while we are decompressing.
1379 */
1380 if (have < LZO_CMP_PAGES && asked) {
1381 ret = hib_wait_io(&hb);
1382 if (ret)
1383 goto out_finish;
1384 have += asked;
1385 asked = 0;
1386 if (eof)
1387 eof = 2;
1388 }
1389
1390 for (run_threads = thr, thr = 0; thr < run_threads; thr++) {
1391 wait_event(data[thr].done,
1392 atomic_read(&data[thr].stop));
1393 atomic_set(&data[thr].stop, 0);
1394
1395 ret = data[thr].ret;
1396
1397 if (ret < 0) {
1398 pr_err("LZO decompression failed\n");
1399 goto out_finish;
1400 }
1401
1402 if (unlikely(!data[thr].unc_len ||
1403 data[thr].unc_len > LZO_UNC_SIZE ||
1404 data[thr].unc_len & (PAGE_SIZE - 1))) {
1405 pr_err("Invalid LZO uncompressed length\n");
1406 ret = -1;
1407 goto out_finish;
1408 }
1409
1410 for (off = 0;
1411 off < data[thr].unc_len; off += PAGE_SIZE) {
1412 memcpy(data_of(*snapshot),
1413 data[thr].unc + off, PAGE_SIZE);
1414
1415 if (!(nr_pages % m))
1416 pr_info("Image loading progress: %3d%%\n",
1417 nr_pages / m * 10);
1418 nr_pages++;
1419
1420 ret = snapshot_write_next(snapshot);
1421 if (ret <= 0) {
1422 crc->run_threads = thr + 1;
1423 atomic_set(&crc->ready, 1);
1424 wake_up(&crc->go);
1425 goto out_finish;
1426 }
1427 }
1428 }
1429
1430 crc->run_threads = thr;
1431 atomic_set(&crc->ready, 1);
1432 wake_up(&crc->go);
1433 }
1434
1435out_finish:
1436 if (crc->run_threads) {
1437 wait_event(crc->done, atomic_read(&crc->stop));
1438 atomic_set(&crc->stop, 0);
1439 }
1440 stop = ktime_get();
1441 if (!ret) {
1442 pr_info("Image loading done\n");
1443 snapshot_write_finalize(snapshot);
1444 if (!snapshot_image_loaded(snapshot))
1445 ret = -ENODATA;
1446 if (!ret) {
1447 if (swsusp_header->flags & SF_CRC32_MODE) {
1448 if(handle->crc32 != swsusp_header->crc32) {
1449 pr_err("Invalid image CRC32!\n");
1450 ret = -ENODATA;
1451 }
1452 }
1453 }
1454 }
1455 swsusp_show_speed(start, stop, nr_to_read, "Read");
1456out_clean:
1457 hib_finish_batch(&hb);
1458 for (i = 0; i < ring_size; i++)
1459 free_page((unsigned long)page[i]);
1460 if (crc) {
1461 if (crc->thr)
1462 kthread_stop(crc->thr);
1463 kfree(crc);
1464 }
1465 if (data) {
1466 for (thr = 0; thr < nr_threads; thr++)
1467 if (data[thr].thr)
1468 kthread_stop(data[thr].thr);
1469 vfree(data);
1470 }
1471 vfree(page);
1472
1473 return ret;
1474}
1475
1476/**
1477 * swsusp_read - read the hibernation image.
1478 * @flags_p: flags passed by the "frozen" kernel in the image header should
1479 * be written into this memory location
1480 */
1481
1482int swsusp_read(unsigned int *flags_p)
1483{
1484 int error;
1485 struct swap_map_handle handle;
1486 struct snapshot_handle snapshot;
1487 struct swsusp_info *header;
1488
1489 memset(&snapshot, 0, sizeof(struct snapshot_handle));
1490 error = snapshot_write_next(&snapshot);
1491 if (error < (int)PAGE_SIZE)
1492 return error < 0 ? error : -EFAULT;
1493 header = (struct swsusp_info *)data_of(snapshot);
1494 error = get_swap_reader(&handle, flags_p);
1495 if (error)
1496 goto end;
1497 if (!error)
1498 error = swap_read_page(&handle, header, NULL);
1499 if (!error) {
1500 error = (*flags_p & SF_NOCOMPRESS_MODE) ?
1501 load_image(&handle, &snapshot, header->pages - 1) :
1502 load_image_lzo(&handle, &snapshot, header->pages - 1);
1503 }
1504 swap_reader_finish(&handle);
1505end:
1506 if (!error)
1507 pr_debug("Image successfully loaded\n");
1508 else
1509 pr_debug("Error %d resuming\n", error);
1510 return error;
1511}
1512
1513/**
1514 * swsusp_check - Check for swsusp signature in the resume device
1515 */
1516
1517int swsusp_check(void)
1518{
1519 int error;
1520 void *holder;
1521
1522 hib_resume_bdev = blkdev_get_by_dev(swsusp_resume_device,
1523 FMODE_READ | FMODE_EXCL, &holder);
1524 if (!IS_ERR(hib_resume_bdev)) {
1525 set_blocksize(hib_resume_bdev, PAGE_SIZE);
1526 clear_page(swsusp_header);
1527 error = hib_submit_io(REQ_OP_READ, swsusp_resume_block,
1528 swsusp_header, NULL);
1529 if (error)
1530 goto put;
1531
1532 if (!memcmp(HIBERNATE_SIG, swsusp_header->sig, 10)) {
1533 memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10);
1534 /* Reset swap signature now */
1535 error = hib_submit_io(REQ_OP_WRITE | REQ_SYNC,
1536 swsusp_resume_block,
1537 swsusp_header, NULL);
1538 } else {
1539 error = -EINVAL;
1540 }
1541 if (!error && swsusp_header->flags & SF_HW_SIG &&
1542 swsusp_header->hw_sig != swsusp_hardware_signature) {
1543 pr_info("Suspend image hardware signature mismatch (%08x now %08x); aborting resume.\n",
1544 swsusp_header->hw_sig, swsusp_hardware_signature);
1545 error = -EINVAL;
1546 }
1547
1548put:
1549 if (error)
1550 blkdev_put(hib_resume_bdev, FMODE_READ | FMODE_EXCL);
1551 else
1552 pr_debug("Image signature found, resuming\n");
1553 } else {
1554 error = PTR_ERR(hib_resume_bdev);
1555 }
1556
1557 if (error)
1558 pr_debug("Image not found (code %d)\n", error);
1559
1560 return error;
1561}
1562
1563/**
1564 * swsusp_close - close swap device.
1565 */
1566
1567void swsusp_close(fmode_t mode)
1568{
1569 if (IS_ERR(hib_resume_bdev)) {
1570 pr_debug("Image device not initialised\n");
1571 return;
1572 }
1573
1574 blkdev_put(hib_resume_bdev, mode);
1575}
1576
1577/**
1578 * swsusp_unmark - Unmark swsusp signature in the resume device
1579 */
1580
1581#ifdef CONFIG_SUSPEND
1582int swsusp_unmark(void)
1583{
1584 int error;
1585
1586 hib_submit_io(REQ_OP_READ, swsusp_resume_block,
1587 swsusp_header, NULL);
1588 if (!memcmp(HIBERNATE_SIG,swsusp_header->sig, 10)) {
1589 memcpy(swsusp_header->sig,swsusp_header->orig_sig, 10);
1590 error = hib_submit_io(REQ_OP_WRITE | REQ_SYNC,
1591 swsusp_resume_block,
1592 swsusp_header, NULL);
1593 } else {
1594 pr_err("Cannot find swsusp signature!\n");
1595 error = -ENODEV;
1596 }
1597
1598 /*
1599 * We just returned from suspend, we don't need the image any more.
1600 */
1601 free_all_swap_pages(root_swap);
1602
1603 return error;
1604}
1605#endif
1606
1607static int __init swsusp_header_init(void)
1608{
1609 swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL);
1610 if (!swsusp_header)
1611 panic("Could not allocate memory for swsusp_header\n");
1612 return 0;
1613}
1614
1615core_initcall(swsusp_header_init);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * linux/kernel/power/swap.c
4 *
5 * This file provides functions for reading the suspend image from
6 * and writing it to a swap partition.
7 *
8 * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
9 * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
10 * Copyright (C) 2010-2012 Bojan Smojver <bojan@rexursive.com>
11 */
12
13#define pr_fmt(fmt) "PM: " fmt
14
15#include <linux/module.h>
16#include <linux/file.h>
17#include <linux/delay.h>
18#include <linux/bitops.h>
19#include <linux/device.h>
20#include <linux/bio.h>
21#include <linux/blkdev.h>
22#include <linux/swap.h>
23#include <linux/swapops.h>
24#include <linux/pm.h>
25#include <linux/slab.h>
26#include <linux/lzo.h>
27#include <linux/vmalloc.h>
28#include <linux/cpumask.h>
29#include <linux/atomic.h>
30#include <linux/kthread.h>
31#include <linux/crc32.h>
32#include <linux/ktime.h>
33
34#include "power.h"
35
36#define HIBERNATE_SIG "S1SUSPEND"
37
38u32 swsusp_hardware_signature;
39
40/*
41 * When reading an {un,}compressed image, we may restore pages in place,
42 * in which case some architectures need these pages cleaning before they
43 * can be executed. We don't know which pages these may be, so clean the lot.
44 */
45static bool clean_pages_on_read;
46static bool clean_pages_on_decompress;
47
48/*
49 * The swap map is a data structure used for keeping track of each page
50 * written to a swap partition. It consists of many swap_map_page
51 * structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
52 * These structures are stored on the swap and linked together with the
53 * help of the .next_swap member.
54 *
55 * The swap map is created during suspend. The swap map pages are
56 * allocated and populated one at a time, so we only need one memory
57 * page to set up the entire structure.
58 *
59 * During resume we pick up all swap_map_page structures into a list.
60 */
61
62#define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1)
63
64/*
65 * Number of free pages that are not high.
66 */
67static inline unsigned long low_free_pages(void)
68{
69 return nr_free_pages() - nr_free_highpages();
70}
71
72/*
73 * Number of pages required to be kept free while writing the image. Always
74 * half of all available low pages before the writing starts.
75 */
76static inline unsigned long reqd_free_pages(void)
77{
78 return low_free_pages() / 2;
79}
80
81struct swap_map_page {
82 sector_t entries[MAP_PAGE_ENTRIES];
83 sector_t next_swap;
84};
85
86struct swap_map_page_list {
87 struct swap_map_page *map;
88 struct swap_map_page_list *next;
89};
90
91/*
92 * The swap_map_handle structure is used for handling swap in
93 * a file-alike way
94 */
95
96struct swap_map_handle {
97 struct swap_map_page *cur;
98 struct swap_map_page_list *maps;
99 sector_t cur_swap;
100 sector_t first_sector;
101 unsigned int k;
102 unsigned long reqd_free_pages;
103 u32 crc32;
104};
105
106struct swsusp_header {
107 char reserved[PAGE_SIZE - 20 - sizeof(sector_t) - sizeof(int) -
108 sizeof(u32) - sizeof(u32)];
109 u32 hw_sig;
110 u32 crc32;
111 sector_t image;
112 unsigned int flags; /* Flags to pass to the "boot" kernel */
113 char orig_sig[10];
114 char sig[10];
115} __packed;
116
117static struct swsusp_header *swsusp_header;
118
119/*
120 * The following functions are used for tracing the allocated
121 * swap pages, so that they can be freed in case of an error.
122 */
123
124struct swsusp_extent {
125 struct rb_node node;
126 unsigned long start;
127 unsigned long end;
128};
129
130static struct rb_root swsusp_extents = RB_ROOT;
131
132static int swsusp_extents_insert(unsigned long swap_offset)
133{
134 struct rb_node **new = &(swsusp_extents.rb_node);
135 struct rb_node *parent = NULL;
136 struct swsusp_extent *ext;
137
138 /* Figure out where to put the new node */
139 while (*new) {
140 ext = rb_entry(*new, struct swsusp_extent, node);
141 parent = *new;
142 if (swap_offset < ext->start) {
143 /* Try to merge */
144 if (swap_offset == ext->start - 1) {
145 ext->start--;
146 return 0;
147 }
148 new = &((*new)->rb_left);
149 } else if (swap_offset > ext->end) {
150 /* Try to merge */
151 if (swap_offset == ext->end + 1) {
152 ext->end++;
153 return 0;
154 }
155 new = &((*new)->rb_right);
156 } else {
157 /* It already is in the tree */
158 return -EINVAL;
159 }
160 }
161 /* Add the new node and rebalance the tree. */
162 ext = kzalloc(sizeof(struct swsusp_extent), GFP_KERNEL);
163 if (!ext)
164 return -ENOMEM;
165
166 ext->start = swap_offset;
167 ext->end = swap_offset;
168 rb_link_node(&ext->node, parent, new);
169 rb_insert_color(&ext->node, &swsusp_extents);
170 return 0;
171}
172
173/*
174 * alloc_swapdev_block - allocate a swap page and register that it has
175 * been allocated, so that it can be freed in case of an error.
176 */
177
178sector_t alloc_swapdev_block(int swap)
179{
180 unsigned long offset;
181
182 offset = swp_offset(get_swap_page_of_type(swap));
183 if (offset) {
184 if (swsusp_extents_insert(offset))
185 swap_free(swp_entry(swap, offset));
186 else
187 return swapdev_block(swap, offset);
188 }
189 return 0;
190}
191
192/*
193 * free_all_swap_pages - free swap pages allocated for saving image data.
194 * It also frees the extents used to register which swap entries had been
195 * allocated.
196 */
197
198void free_all_swap_pages(int swap)
199{
200 struct rb_node *node;
201
202 while ((node = swsusp_extents.rb_node)) {
203 struct swsusp_extent *ext;
204 unsigned long offset;
205
206 ext = rb_entry(node, struct swsusp_extent, node);
207 rb_erase(node, &swsusp_extents);
208 for (offset = ext->start; offset <= ext->end; offset++)
209 swap_free(swp_entry(swap, offset));
210
211 kfree(ext);
212 }
213}
214
215int swsusp_swap_in_use(void)
216{
217 return (swsusp_extents.rb_node != NULL);
218}
219
220/*
221 * General things
222 */
223
224static unsigned short root_swap = 0xffff;
225static struct bdev_handle *hib_resume_bdev_handle;
226
227struct hib_bio_batch {
228 atomic_t count;
229 wait_queue_head_t wait;
230 blk_status_t error;
231 struct blk_plug plug;
232};
233
234static void hib_init_batch(struct hib_bio_batch *hb)
235{
236 atomic_set(&hb->count, 0);
237 init_waitqueue_head(&hb->wait);
238 hb->error = BLK_STS_OK;
239 blk_start_plug(&hb->plug);
240}
241
242static void hib_finish_batch(struct hib_bio_batch *hb)
243{
244 blk_finish_plug(&hb->plug);
245}
246
247static void hib_end_io(struct bio *bio)
248{
249 struct hib_bio_batch *hb = bio->bi_private;
250 struct page *page = bio_first_page_all(bio);
251
252 if (bio->bi_status) {
253 pr_alert("Read-error on swap-device (%u:%u:%Lu)\n",
254 MAJOR(bio_dev(bio)), MINOR(bio_dev(bio)),
255 (unsigned long long)bio->bi_iter.bi_sector);
256 }
257
258 if (bio_data_dir(bio) == WRITE)
259 put_page(page);
260 else if (clean_pages_on_read)
261 flush_icache_range((unsigned long)page_address(page),
262 (unsigned long)page_address(page) + PAGE_SIZE);
263
264 if (bio->bi_status && !hb->error)
265 hb->error = bio->bi_status;
266 if (atomic_dec_and_test(&hb->count))
267 wake_up(&hb->wait);
268
269 bio_put(bio);
270}
271
272static int hib_submit_io(blk_opf_t opf, pgoff_t page_off, void *addr,
273 struct hib_bio_batch *hb)
274{
275 struct page *page = virt_to_page(addr);
276 struct bio *bio;
277 int error = 0;
278
279 bio = bio_alloc(hib_resume_bdev_handle->bdev, 1, opf,
280 GFP_NOIO | __GFP_HIGH);
281 bio->bi_iter.bi_sector = page_off * (PAGE_SIZE >> 9);
282
283 if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {
284 pr_err("Adding page to bio failed at %llu\n",
285 (unsigned long long)bio->bi_iter.bi_sector);
286 bio_put(bio);
287 return -EFAULT;
288 }
289
290 if (hb) {
291 bio->bi_end_io = hib_end_io;
292 bio->bi_private = hb;
293 atomic_inc(&hb->count);
294 submit_bio(bio);
295 } else {
296 error = submit_bio_wait(bio);
297 bio_put(bio);
298 }
299
300 return error;
301}
302
303static int hib_wait_io(struct hib_bio_batch *hb)
304{
305 /*
306 * We are relying on the behavior of blk_plug that a thread with
307 * a plug will flush the plug list before sleeping.
308 */
309 wait_event(hb->wait, atomic_read(&hb->count) == 0);
310 return blk_status_to_errno(hb->error);
311}
312
313/*
314 * Saving part
315 */
316static int mark_swapfiles(struct swap_map_handle *handle, unsigned int flags)
317{
318 int error;
319
320 hib_submit_io(REQ_OP_READ, swsusp_resume_block, swsusp_header, NULL);
321 if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) ||
322 !memcmp("SWAPSPACE2",swsusp_header->sig, 10)) {
323 memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10);
324 memcpy(swsusp_header->sig, HIBERNATE_SIG, 10);
325 swsusp_header->image = handle->first_sector;
326 if (swsusp_hardware_signature) {
327 swsusp_header->hw_sig = swsusp_hardware_signature;
328 flags |= SF_HW_SIG;
329 }
330 swsusp_header->flags = flags;
331 if (flags & SF_CRC32_MODE)
332 swsusp_header->crc32 = handle->crc32;
333 error = hib_submit_io(REQ_OP_WRITE | REQ_SYNC,
334 swsusp_resume_block, swsusp_header, NULL);
335 } else {
336 pr_err("Swap header not found!\n");
337 error = -ENODEV;
338 }
339 return error;
340}
341
342/**
343 * swsusp_swap_check - check if the resume device is a swap device
344 * and get its index (if so)
345 *
346 * This is called before saving image
347 */
348static int swsusp_swap_check(void)
349{
350 int res;
351
352 if (swsusp_resume_device)
353 res = swap_type_of(swsusp_resume_device, swsusp_resume_block);
354 else
355 res = find_first_swap(&swsusp_resume_device);
356 if (res < 0)
357 return res;
358 root_swap = res;
359
360 hib_resume_bdev_handle = bdev_open_by_dev(swsusp_resume_device,
361 BLK_OPEN_WRITE, NULL, NULL);
362 if (IS_ERR(hib_resume_bdev_handle))
363 return PTR_ERR(hib_resume_bdev_handle);
364
365 res = set_blocksize(hib_resume_bdev_handle->bdev, PAGE_SIZE);
366 if (res < 0)
367 bdev_release(hib_resume_bdev_handle);
368
369 return res;
370}
371
372/**
373 * write_page - Write one page to given swap location.
374 * @buf: Address we're writing.
375 * @offset: Offset of the swap page we're writing to.
376 * @hb: bio completion batch
377 */
378
379static int write_page(void *buf, sector_t offset, struct hib_bio_batch *hb)
380{
381 void *src;
382 int ret;
383
384 if (!offset)
385 return -ENOSPC;
386
387 if (hb) {
388 src = (void *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
389 __GFP_NORETRY);
390 if (src) {
391 copy_page(src, buf);
392 } else {
393 ret = hib_wait_io(hb); /* Free pages */
394 if (ret)
395 return ret;
396 src = (void *)__get_free_page(GFP_NOIO |
397 __GFP_NOWARN |
398 __GFP_NORETRY);
399 if (src) {
400 copy_page(src, buf);
401 } else {
402 WARN_ON_ONCE(1);
403 hb = NULL; /* Go synchronous */
404 src = buf;
405 }
406 }
407 } else {
408 src = buf;
409 }
410 return hib_submit_io(REQ_OP_WRITE | REQ_SYNC, offset, src, hb);
411}
412
413static void release_swap_writer(struct swap_map_handle *handle)
414{
415 if (handle->cur)
416 free_page((unsigned long)handle->cur);
417 handle->cur = NULL;
418}
419
420static int get_swap_writer(struct swap_map_handle *handle)
421{
422 int ret;
423
424 ret = swsusp_swap_check();
425 if (ret) {
426 if (ret != -ENOSPC)
427 pr_err("Cannot find swap device, try swapon -a\n");
428 return ret;
429 }
430 handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL);
431 if (!handle->cur) {
432 ret = -ENOMEM;
433 goto err_close;
434 }
435 handle->cur_swap = alloc_swapdev_block(root_swap);
436 if (!handle->cur_swap) {
437 ret = -ENOSPC;
438 goto err_rel;
439 }
440 handle->k = 0;
441 handle->reqd_free_pages = reqd_free_pages();
442 handle->first_sector = handle->cur_swap;
443 return 0;
444err_rel:
445 release_swap_writer(handle);
446err_close:
447 swsusp_close();
448 return ret;
449}
450
451static int swap_write_page(struct swap_map_handle *handle, void *buf,
452 struct hib_bio_batch *hb)
453{
454 int error;
455 sector_t offset;
456
457 if (!handle->cur)
458 return -EINVAL;
459 offset = alloc_swapdev_block(root_swap);
460 error = write_page(buf, offset, hb);
461 if (error)
462 return error;
463 handle->cur->entries[handle->k++] = offset;
464 if (handle->k >= MAP_PAGE_ENTRIES) {
465 offset = alloc_swapdev_block(root_swap);
466 if (!offset)
467 return -ENOSPC;
468 handle->cur->next_swap = offset;
469 error = write_page(handle->cur, handle->cur_swap, hb);
470 if (error)
471 goto out;
472 clear_page(handle->cur);
473 handle->cur_swap = offset;
474 handle->k = 0;
475
476 if (hb && low_free_pages() <= handle->reqd_free_pages) {
477 error = hib_wait_io(hb);
478 if (error)
479 goto out;
480 /*
481 * Recalculate the number of required free pages, to
482 * make sure we never take more than half.
483 */
484 handle->reqd_free_pages = reqd_free_pages();
485 }
486 }
487 out:
488 return error;
489}
490
491static int flush_swap_writer(struct swap_map_handle *handle)
492{
493 if (handle->cur && handle->cur_swap)
494 return write_page(handle->cur, handle->cur_swap, NULL);
495 else
496 return -EINVAL;
497}
498
499static int swap_writer_finish(struct swap_map_handle *handle,
500 unsigned int flags, int error)
501{
502 if (!error) {
503 pr_info("S");
504 error = mark_swapfiles(handle, flags);
505 pr_cont("|\n");
506 flush_swap_writer(handle);
507 }
508
509 if (error)
510 free_all_swap_pages(root_swap);
511 release_swap_writer(handle);
512 swsusp_close();
513
514 return error;
515}
516
517/* We need to remember how much compressed data we need to read. */
518#define LZO_HEADER sizeof(size_t)
519
520/* Number of pages/bytes we'll compress at one time. */
521#define LZO_UNC_PAGES 32
522#define LZO_UNC_SIZE (LZO_UNC_PAGES * PAGE_SIZE)
523
524/* Number of pages/bytes we need for compressed data (worst case). */
525#define LZO_CMP_PAGES DIV_ROUND_UP(lzo1x_worst_compress(LZO_UNC_SIZE) + \
526 LZO_HEADER, PAGE_SIZE)
527#define LZO_CMP_SIZE (LZO_CMP_PAGES * PAGE_SIZE)
528
529/* Maximum number of threads for compression/decompression. */
530#define LZO_THREADS 3
531
532/* Minimum/maximum number of pages for read buffering. */
533#define LZO_MIN_RD_PAGES 1024
534#define LZO_MAX_RD_PAGES 8192
535
536
537/**
538 * save_image - save the suspend image data
539 */
540
541static int save_image(struct swap_map_handle *handle,
542 struct snapshot_handle *snapshot,
543 unsigned int nr_to_write)
544{
545 unsigned int m;
546 int ret;
547 int nr_pages;
548 int err2;
549 struct hib_bio_batch hb;
550 ktime_t start;
551 ktime_t stop;
552
553 hib_init_batch(&hb);
554
555 pr_info("Saving image data pages (%u pages)...\n",
556 nr_to_write);
557 m = nr_to_write / 10;
558 if (!m)
559 m = 1;
560 nr_pages = 0;
561 start = ktime_get();
562 while (1) {
563 ret = snapshot_read_next(snapshot);
564 if (ret <= 0)
565 break;
566 ret = swap_write_page(handle, data_of(*snapshot), &hb);
567 if (ret)
568 break;
569 if (!(nr_pages % m))
570 pr_info("Image saving progress: %3d%%\n",
571 nr_pages / m * 10);
572 nr_pages++;
573 }
574 err2 = hib_wait_io(&hb);
575 hib_finish_batch(&hb);
576 stop = ktime_get();
577 if (!ret)
578 ret = err2;
579 if (!ret)
580 pr_info("Image saving done\n");
581 swsusp_show_speed(start, stop, nr_to_write, "Wrote");
582 return ret;
583}
584
585/*
586 * Structure used for CRC32.
587 */
588struct crc_data {
589 struct task_struct *thr; /* thread */
590 atomic_t ready; /* ready to start flag */
591 atomic_t stop; /* ready to stop flag */
592 unsigned run_threads; /* nr current threads */
593 wait_queue_head_t go; /* start crc update */
594 wait_queue_head_t done; /* crc update done */
595 u32 *crc32; /* points to handle's crc32 */
596 size_t *unc_len[LZO_THREADS]; /* uncompressed lengths */
597 unsigned char *unc[LZO_THREADS]; /* uncompressed data */
598};
599
600/*
601 * CRC32 update function that runs in its own thread.
602 */
603static int crc32_threadfn(void *data)
604{
605 struct crc_data *d = data;
606 unsigned i;
607
608 while (1) {
609 wait_event(d->go, atomic_read_acquire(&d->ready) ||
610 kthread_should_stop());
611 if (kthread_should_stop()) {
612 d->thr = NULL;
613 atomic_set_release(&d->stop, 1);
614 wake_up(&d->done);
615 break;
616 }
617 atomic_set(&d->ready, 0);
618
619 for (i = 0; i < d->run_threads; i++)
620 *d->crc32 = crc32_le(*d->crc32,
621 d->unc[i], *d->unc_len[i]);
622 atomic_set_release(&d->stop, 1);
623 wake_up(&d->done);
624 }
625 return 0;
626}
627/*
628 * Structure used for LZO data compression.
629 */
630struct cmp_data {
631 struct task_struct *thr; /* thread */
632 atomic_t ready; /* ready to start flag */
633 atomic_t stop; /* ready to stop flag */
634 int ret; /* return code */
635 wait_queue_head_t go; /* start compression */
636 wait_queue_head_t done; /* compression done */
637 size_t unc_len; /* uncompressed length */
638 size_t cmp_len; /* compressed length */
639 unsigned char unc[LZO_UNC_SIZE]; /* uncompressed buffer */
640 unsigned char cmp[LZO_CMP_SIZE]; /* compressed buffer */
641 unsigned char wrk[LZO1X_1_MEM_COMPRESS]; /* compression workspace */
642};
643
644/*
645 * Compression function that runs in its own thread.
646 */
647static int lzo_compress_threadfn(void *data)
648{
649 struct cmp_data *d = data;
650
651 while (1) {
652 wait_event(d->go, atomic_read_acquire(&d->ready) ||
653 kthread_should_stop());
654 if (kthread_should_stop()) {
655 d->thr = NULL;
656 d->ret = -1;
657 atomic_set_release(&d->stop, 1);
658 wake_up(&d->done);
659 break;
660 }
661 atomic_set(&d->ready, 0);
662
663 d->ret = lzo1x_1_compress(d->unc, d->unc_len,
664 d->cmp + LZO_HEADER, &d->cmp_len,
665 d->wrk);
666 atomic_set_release(&d->stop, 1);
667 wake_up(&d->done);
668 }
669 return 0;
670}
671
672/**
673 * save_image_lzo - Save the suspend image data compressed with LZO.
674 * @handle: Swap map handle to use for saving the image.
675 * @snapshot: Image to read data from.
676 * @nr_to_write: Number of pages to save.
677 */
678static int save_image_lzo(struct swap_map_handle *handle,
679 struct snapshot_handle *snapshot,
680 unsigned int nr_to_write)
681{
682 unsigned int m;
683 int ret = 0;
684 int nr_pages;
685 int err2;
686 struct hib_bio_batch hb;
687 ktime_t start;
688 ktime_t stop;
689 size_t off;
690 unsigned thr, run_threads, nr_threads;
691 unsigned char *page = NULL;
692 struct cmp_data *data = NULL;
693 struct crc_data *crc = NULL;
694
695 hib_init_batch(&hb);
696
697 /*
698 * We'll limit the number of threads for compression to limit memory
699 * footprint.
700 */
701 nr_threads = num_online_cpus() - 1;
702 nr_threads = clamp_val(nr_threads, 1, LZO_THREADS);
703
704 page = (void *)__get_free_page(GFP_NOIO | __GFP_HIGH);
705 if (!page) {
706 pr_err("Failed to allocate LZO page\n");
707 ret = -ENOMEM;
708 goto out_clean;
709 }
710
711 data = vzalloc(array_size(nr_threads, sizeof(*data)));
712 if (!data) {
713 pr_err("Failed to allocate LZO data\n");
714 ret = -ENOMEM;
715 goto out_clean;
716 }
717
718 crc = kzalloc(sizeof(*crc), GFP_KERNEL);
719 if (!crc) {
720 pr_err("Failed to allocate crc\n");
721 ret = -ENOMEM;
722 goto out_clean;
723 }
724
725 /*
726 * Start the compression threads.
727 */
728 for (thr = 0; thr < nr_threads; thr++) {
729 init_waitqueue_head(&data[thr].go);
730 init_waitqueue_head(&data[thr].done);
731
732 data[thr].thr = kthread_run(lzo_compress_threadfn,
733 &data[thr],
734 "image_compress/%u", thr);
735 if (IS_ERR(data[thr].thr)) {
736 data[thr].thr = NULL;
737 pr_err("Cannot start compression threads\n");
738 ret = -ENOMEM;
739 goto out_clean;
740 }
741 }
742
743 /*
744 * Start the CRC32 thread.
745 */
746 init_waitqueue_head(&crc->go);
747 init_waitqueue_head(&crc->done);
748
749 handle->crc32 = 0;
750 crc->crc32 = &handle->crc32;
751 for (thr = 0; thr < nr_threads; thr++) {
752 crc->unc[thr] = data[thr].unc;
753 crc->unc_len[thr] = &data[thr].unc_len;
754 }
755
756 crc->thr = kthread_run(crc32_threadfn, crc, "image_crc32");
757 if (IS_ERR(crc->thr)) {
758 crc->thr = NULL;
759 pr_err("Cannot start CRC32 thread\n");
760 ret = -ENOMEM;
761 goto out_clean;
762 }
763
764 /*
765 * Adjust the number of required free pages after all allocations have
766 * been done. We don't want to run out of pages when writing.
767 */
768 handle->reqd_free_pages = reqd_free_pages();
769
770 pr_info("Using %u thread(s) for compression\n", nr_threads);
771 pr_info("Compressing and saving image data (%u pages)...\n",
772 nr_to_write);
773 m = nr_to_write / 10;
774 if (!m)
775 m = 1;
776 nr_pages = 0;
777 start = ktime_get();
778 for (;;) {
779 for (thr = 0; thr < nr_threads; thr++) {
780 for (off = 0; off < LZO_UNC_SIZE; off += PAGE_SIZE) {
781 ret = snapshot_read_next(snapshot);
782 if (ret < 0)
783 goto out_finish;
784
785 if (!ret)
786 break;
787
788 memcpy(data[thr].unc + off,
789 data_of(*snapshot), PAGE_SIZE);
790
791 if (!(nr_pages % m))
792 pr_info("Image saving progress: %3d%%\n",
793 nr_pages / m * 10);
794 nr_pages++;
795 }
796 if (!off)
797 break;
798
799 data[thr].unc_len = off;
800
801 atomic_set_release(&data[thr].ready, 1);
802 wake_up(&data[thr].go);
803 }
804
805 if (!thr)
806 break;
807
808 crc->run_threads = thr;
809 atomic_set_release(&crc->ready, 1);
810 wake_up(&crc->go);
811
812 for (run_threads = thr, thr = 0; thr < run_threads; thr++) {
813 wait_event(data[thr].done,
814 atomic_read_acquire(&data[thr].stop));
815 atomic_set(&data[thr].stop, 0);
816
817 ret = data[thr].ret;
818
819 if (ret < 0) {
820 pr_err("LZO compression failed\n");
821 goto out_finish;
822 }
823
824 if (unlikely(!data[thr].cmp_len ||
825 data[thr].cmp_len >
826 lzo1x_worst_compress(data[thr].unc_len))) {
827 pr_err("Invalid LZO compressed length\n");
828 ret = -1;
829 goto out_finish;
830 }
831
832 *(size_t *)data[thr].cmp = data[thr].cmp_len;
833
834 /*
835 * Given we are writing one page at a time to disk, we
836 * copy that much from the buffer, although the last
837 * bit will likely be smaller than full page. This is
838 * OK - we saved the length of the compressed data, so
839 * any garbage at the end will be discarded when we
840 * read it.
841 */
842 for (off = 0;
843 off < LZO_HEADER + data[thr].cmp_len;
844 off += PAGE_SIZE) {
845 memcpy(page, data[thr].cmp + off, PAGE_SIZE);
846
847 ret = swap_write_page(handle, page, &hb);
848 if (ret)
849 goto out_finish;
850 }
851 }
852
853 wait_event(crc->done, atomic_read_acquire(&crc->stop));
854 atomic_set(&crc->stop, 0);
855 }
856
857out_finish:
858 err2 = hib_wait_io(&hb);
859 stop = ktime_get();
860 if (!ret)
861 ret = err2;
862 if (!ret)
863 pr_info("Image saving done\n");
864 swsusp_show_speed(start, stop, nr_to_write, "Wrote");
865out_clean:
866 hib_finish_batch(&hb);
867 if (crc) {
868 if (crc->thr)
869 kthread_stop(crc->thr);
870 kfree(crc);
871 }
872 if (data) {
873 for (thr = 0; thr < nr_threads; thr++)
874 if (data[thr].thr)
875 kthread_stop(data[thr].thr);
876 vfree(data);
877 }
878 if (page) free_page((unsigned long)page);
879
880 return ret;
881}
882
883/**
884 * enough_swap - Make sure we have enough swap to save the image.
885 *
886 * Returns TRUE or FALSE after checking the total amount of swap
887 * space available from the resume partition.
888 */
889
890static int enough_swap(unsigned int nr_pages)
891{
892 unsigned int free_swap = count_swap_pages(root_swap, 1);
893 unsigned int required;
894
895 pr_debug("Free swap pages: %u\n", free_swap);
896
897 required = PAGES_FOR_IO + nr_pages;
898 return free_swap > required;
899}
900
901/**
902 * swsusp_write - Write entire image and metadata.
903 * @flags: flags to pass to the "boot" kernel in the image header
904 *
905 * It is important _NOT_ to umount filesystems at this point. We want
906 * them synced (in case something goes wrong) but we DO not want to mark
907 * filesystem clean: it is not. (And it does not matter, if we resume
908 * correctly, we'll mark system clean, anyway.)
909 */
910
911int swsusp_write(unsigned int flags)
912{
913 struct swap_map_handle handle;
914 struct snapshot_handle snapshot;
915 struct swsusp_info *header;
916 unsigned long pages;
917 int error;
918
919 pages = snapshot_get_image_size();
920 error = get_swap_writer(&handle);
921 if (error) {
922 pr_err("Cannot get swap writer\n");
923 return error;
924 }
925 if (flags & SF_NOCOMPRESS_MODE) {
926 if (!enough_swap(pages)) {
927 pr_err("Not enough free swap\n");
928 error = -ENOSPC;
929 goto out_finish;
930 }
931 }
932 memset(&snapshot, 0, sizeof(struct snapshot_handle));
933 error = snapshot_read_next(&snapshot);
934 if (error < (int)PAGE_SIZE) {
935 if (error >= 0)
936 error = -EFAULT;
937
938 goto out_finish;
939 }
940 header = (struct swsusp_info *)data_of(snapshot);
941 error = swap_write_page(&handle, header, NULL);
942 if (!error) {
943 error = (flags & SF_NOCOMPRESS_MODE) ?
944 save_image(&handle, &snapshot, pages - 1) :
945 save_image_lzo(&handle, &snapshot, pages - 1);
946 }
947out_finish:
948 error = swap_writer_finish(&handle, flags, error);
949 return error;
950}
951
952/*
953 * The following functions allow us to read data using a swap map
954 * in a file-like way.
955 */
956
957static void release_swap_reader(struct swap_map_handle *handle)
958{
959 struct swap_map_page_list *tmp;
960
961 while (handle->maps) {
962 if (handle->maps->map)
963 free_page((unsigned long)handle->maps->map);
964 tmp = handle->maps;
965 handle->maps = handle->maps->next;
966 kfree(tmp);
967 }
968 handle->cur = NULL;
969}
970
971static int get_swap_reader(struct swap_map_handle *handle,
972 unsigned int *flags_p)
973{
974 int error;
975 struct swap_map_page_list *tmp, *last;
976 sector_t offset;
977
978 *flags_p = swsusp_header->flags;
979
980 if (!swsusp_header->image) /* how can this happen? */
981 return -EINVAL;
982
983 handle->cur = NULL;
984 last = handle->maps = NULL;
985 offset = swsusp_header->image;
986 while (offset) {
987 tmp = kzalloc(sizeof(*handle->maps), GFP_KERNEL);
988 if (!tmp) {
989 release_swap_reader(handle);
990 return -ENOMEM;
991 }
992 if (!handle->maps)
993 handle->maps = tmp;
994 if (last)
995 last->next = tmp;
996 last = tmp;
997
998 tmp->map = (struct swap_map_page *)
999 __get_free_page(GFP_NOIO | __GFP_HIGH);
1000 if (!tmp->map) {
1001 release_swap_reader(handle);
1002 return -ENOMEM;
1003 }
1004
1005 error = hib_submit_io(REQ_OP_READ, offset, tmp->map, NULL);
1006 if (error) {
1007 release_swap_reader(handle);
1008 return error;
1009 }
1010 offset = tmp->map->next_swap;
1011 }
1012 handle->k = 0;
1013 handle->cur = handle->maps->map;
1014 return 0;
1015}
1016
1017static int swap_read_page(struct swap_map_handle *handle, void *buf,
1018 struct hib_bio_batch *hb)
1019{
1020 sector_t offset;
1021 int error;
1022 struct swap_map_page_list *tmp;
1023
1024 if (!handle->cur)
1025 return -EINVAL;
1026 offset = handle->cur->entries[handle->k];
1027 if (!offset)
1028 return -EFAULT;
1029 error = hib_submit_io(REQ_OP_READ, offset, buf, hb);
1030 if (error)
1031 return error;
1032 if (++handle->k >= MAP_PAGE_ENTRIES) {
1033 handle->k = 0;
1034 free_page((unsigned long)handle->maps->map);
1035 tmp = handle->maps;
1036 handle->maps = handle->maps->next;
1037 kfree(tmp);
1038 if (!handle->maps)
1039 release_swap_reader(handle);
1040 else
1041 handle->cur = handle->maps->map;
1042 }
1043 return error;
1044}
1045
1046static int swap_reader_finish(struct swap_map_handle *handle)
1047{
1048 release_swap_reader(handle);
1049
1050 return 0;
1051}
1052
1053/**
1054 * load_image - load the image using the swap map handle
1055 * @handle and the snapshot handle @snapshot
1056 * (assume there are @nr_pages pages to load)
1057 */
1058
1059static int load_image(struct swap_map_handle *handle,
1060 struct snapshot_handle *snapshot,
1061 unsigned int nr_to_read)
1062{
1063 unsigned int m;
1064 int ret = 0;
1065 ktime_t start;
1066 ktime_t stop;
1067 struct hib_bio_batch hb;
1068 int err2;
1069 unsigned nr_pages;
1070
1071 hib_init_batch(&hb);
1072
1073 clean_pages_on_read = true;
1074 pr_info("Loading image data pages (%u pages)...\n", nr_to_read);
1075 m = nr_to_read / 10;
1076 if (!m)
1077 m = 1;
1078 nr_pages = 0;
1079 start = ktime_get();
1080 for ( ; ; ) {
1081 ret = snapshot_write_next(snapshot);
1082 if (ret <= 0)
1083 break;
1084 ret = swap_read_page(handle, data_of(*snapshot), &hb);
1085 if (ret)
1086 break;
1087 if (snapshot->sync_read)
1088 ret = hib_wait_io(&hb);
1089 if (ret)
1090 break;
1091 if (!(nr_pages % m))
1092 pr_info("Image loading progress: %3d%%\n",
1093 nr_pages / m * 10);
1094 nr_pages++;
1095 }
1096 err2 = hib_wait_io(&hb);
1097 hib_finish_batch(&hb);
1098 stop = ktime_get();
1099 if (!ret)
1100 ret = err2;
1101 if (!ret) {
1102 pr_info("Image loading done\n");
1103 snapshot_write_finalize(snapshot);
1104 if (!snapshot_image_loaded(snapshot))
1105 ret = -ENODATA;
1106 }
1107 swsusp_show_speed(start, stop, nr_to_read, "Read");
1108 return ret;
1109}
1110
1111/*
1112 * Structure used for LZO data decompression.
1113 */
1114struct dec_data {
1115 struct task_struct *thr; /* thread */
1116 atomic_t ready; /* ready to start flag */
1117 atomic_t stop; /* ready to stop flag */
1118 int ret; /* return code */
1119 wait_queue_head_t go; /* start decompression */
1120 wait_queue_head_t done; /* decompression done */
1121 size_t unc_len; /* uncompressed length */
1122 size_t cmp_len; /* compressed length */
1123 unsigned char unc[LZO_UNC_SIZE]; /* uncompressed buffer */
1124 unsigned char cmp[LZO_CMP_SIZE]; /* compressed buffer */
1125};
1126
1127/*
1128 * Decompression function that runs in its own thread.
1129 */
1130static int lzo_decompress_threadfn(void *data)
1131{
1132 struct dec_data *d = data;
1133
1134 while (1) {
1135 wait_event(d->go, atomic_read_acquire(&d->ready) ||
1136 kthread_should_stop());
1137 if (kthread_should_stop()) {
1138 d->thr = NULL;
1139 d->ret = -1;
1140 atomic_set_release(&d->stop, 1);
1141 wake_up(&d->done);
1142 break;
1143 }
1144 atomic_set(&d->ready, 0);
1145
1146 d->unc_len = LZO_UNC_SIZE;
1147 d->ret = lzo1x_decompress_safe(d->cmp + LZO_HEADER, d->cmp_len,
1148 d->unc, &d->unc_len);
1149 if (clean_pages_on_decompress)
1150 flush_icache_range((unsigned long)d->unc,
1151 (unsigned long)d->unc + d->unc_len);
1152
1153 atomic_set_release(&d->stop, 1);
1154 wake_up(&d->done);
1155 }
1156 return 0;
1157}
1158
1159/**
1160 * load_image_lzo - Load compressed image data and decompress them with LZO.
1161 * @handle: Swap map handle to use for loading data.
1162 * @snapshot: Image to copy uncompressed data into.
1163 * @nr_to_read: Number of pages to load.
1164 */
1165static int load_image_lzo(struct swap_map_handle *handle,
1166 struct snapshot_handle *snapshot,
1167 unsigned int nr_to_read)
1168{
1169 unsigned int m;
1170 int ret = 0;
1171 int eof = 0;
1172 struct hib_bio_batch hb;
1173 ktime_t start;
1174 ktime_t stop;
1175 unsigned nr_pages;
1176 size_t off;
1177 unsigned i, thr, run_threads, nr_threads;
1178 unsigned ring = 0, pg = 0, ring_size = 0,
1179 have = 0, want, need, asked = 0;
1180 unsigned long read_pages = 0;
1181 unsigned char **page = NULL;
1182 struct dec_data *data = NULL;
1183 struct crc_data *crc = NULL;
1184
1185 hib_init_batch(&hb);
1186
1187 /*
1188 * We'll limit the number of threads for decompression to limit memory
1189 * footprint.
1190 */
1191 nr_threads = num_online_cpus() - 1;
1192 nr_threads = clamp_val(nr_threads, 1, LZO_THREADS);
1193
1194 page = vmalloc(array_size(LZO_MAX_RD_PAGES, sizeof(*page)));
1195 if (!page) {
1196 pr_err("Failed to allocate LZO page\n");
1197 ret = -ENOMEM;
1198 goto out_clean;
1199 }
1200
1201 data = vzalloc(array_size(nr_threads, sizeof(*data)));
1202 if (!data) {
1203 pr_err("Failed to allocate LZO data\n");
1204 ret = -ENOMEM;
1205 goto out_clean;
1206 }
1207
1208 crc = kzalloc(sizeof(*crc), GFP_KERNEL);
1209 if (!crc) {
1210 pr_err("Failed to allocate crc\n");
1211 ret = -ENOMEM;
1212 goto out_clean;
1213 }
1214
1215 clean_pages_on_decompress = true;
1216
1217 /*
1218 * Start the decompression threads.
1219 */
1220 for (thr = 0; thr < nr_threads; thr++) {
1221 init_waitqueue_head(&data[thr].go);
1222 init_waitqueue_head(&data[thr].done);
1223
1224 data[thr].thr = kthread_run(lzo_decompress_threadfn,
1225 &data[thr],
1226 "image_decompress/%u", thr);
1227 if (IS_ERR(data[thr].thr)) {
1228 data[thr].thr = NULL;
1229 pr_err("Cannot start decompression threads\n");
1230 ret = -ENOMEM;
1231 goto out_clean;
1232 }
1233 }
1234
1235 /*
1236 * Start the CRC32 thread.
1237 */
1238 init_waitqueue_head(&crc->go);
1239 init_waitqueue_head(&crc->done);
1240
1241 handle->crc32 = 0;
1242 crc->crc32 = &handle->crc32;
1243 for (thr = 0; thr < nr_threads; thr++) {
1244 crc->unc[thr] = data[thr].unc;
1245 crc->unc_len[thr] = &data[thr].unc_len;
1246 }
1247
1248 crc->thr = kthread_run(crc32_threadfn, crc, "image_crc32");
1249 if (IS_ERR(crc->thr)) {
1250 crc->thr = NULL;
1251 pr_err("Cannot start CRC32 thread\n");
1252 ret = -ENOMEM;
1253 goto out_clean;
1254 }
1255
1256 /*
1257 * Set the number of pages for read buffering.
1258 * This is complete guesswork, because we'll only know the real
1259 * picture once prepare_image() is called, which is much later on
1260 * during the image load phase. We'll assume the worst case and
1261 * say that none of the image pages are from high memory.
1262 */
1263 if (low_free_pages() > snapshot_get_image_size())
1264 read_pages = (low_free_pages() - snapshot_get_image_size()) / 2;
1265 read_pages = clamp_val(read_pages, LZO_MIN_RD_PAGES, LZO_MAX_RD_PAGES);
1266
1267 for (i = 0; i < read_pages; i++) {
1268 page[i] = (void *)__get_free_page(i < LZO_CMP_PAGES ?
1269 GFP_NOIO | __GFP_HIGH :
1270 GFP_NOIO | __GFP_NOWARN |
1271 __GFP_NORETRY);
1272
1273 if (!page[i]) {
1274 if (i < LZO_CMP_PAGES) {
1275 ring_size = i;
1276 pr_err("Failed to allocate LZO pages\n");
1277 ret = -ENOMEM;
1278 goto out_clean;
1279 } else {
1280 break;
1281 }
1282 }
1283 }
1284 want = ring_size = i;
1285
1286 pr_info("Using %u thread(s) for decompression\n", nr_threads);
1287 pr_info("Loading and decompressing image data (%u pages)...\n",
1288 nr_to_read);
1289 m = nr_to_read / 10;
1290 if (!m)
1291 m = 1;
1292 nr_pages = 0;
1293 start = ktime_get();
1294
1295 ret = snapshot_write_next(snapshot);
1296 if (ret <= 0)
1297 goto out_finish;
1298
1299 for(;;) {
1300 for (i = 0; !eof && i < want; i++) {
1301 ret = swap_read_page(handle, page[ring], &hb);
1302 if (ret) {
1303 /*
1304 * On real read error, finish. On end of data,
1305 * set EOF flag and just exit the read loop.
1306 */
1307 if (handle->cur &&
1308 handle->cur->entries[handle->k]) {
1309 goto out_finish;
1310 } else {
1311 eof = 1;
1312 break;
1313 }
1314 }
1315 if (++ring >= ring_size)
1316 ring = 0;
1317 }
1318 asked += i;
1319 want -= i;
1320
1321 /*
1322 * We are out of data, wait for some more.
1323 */
1324 if (!have) {
1325 if (!asked)
1326 break;
1327
1328 ret = hib_wait_io(&hb);
1329 if (ret)
1330 goto out_finish;
1331 have += asked;
1332 asked = 0;
1333 if (eof)
1334 eof = 2;
1335 }
1336
1337 if (crc->run_threads) {
1338 wait_event(crc->done, atomic_read_acquire(&crc->stop));
1339 atomic_set(&crc->stop, 0);
1340 crc->run_threads = 0;
1341 }
1342
1343 for (thr = 0; have && thr < nr_threads; thr++) {
1344 data[thr].cmp_len = *(size_t *)page[pg];
1345 if (unlikely(!data[thr].cmp_len ||
1346 data[thr].cmp_len >
1347 lzo1x_worst_compress(LZO_UNC_SIZE))) {
1348 pr_err("Invalid LZO compressed length\n");
1349 ret = -1;
1350 goto out_finish;
1351 }
1352
1353 need = DIV_ROUND_UP(data[thr].cmp_len + LZO_HEADER,
1354 PAGE_SIZE);
1355 if (need > have) {
1356 if (eof > 1) {
1357 ret = -1;
1358 goto out_finish;
1359 }
1360 break;
1361 }
1362
1363 for (off = 0;
1364 off < LZO_HEADER + data[thr].cmp_len;
1365 off += PAGE_SIZE) {
1366 memcpy(data[thr].cmp + off,
1367 page[pg], PAGE_SIZE);
1368 have--;
1369 want++;
1370 if (++pg >= ring_size)
1371 pg = 0;
1372 }
1373
1374 atomic_set_release(&data[thr].ready, 1);
1375 wake_up(&data[thr].go);
1376 }
1377
1378 /*
1379 * Wait for more data while we are decompressing.
1380 */
1381 if (have < LZO_CMP_PAGES && asked) {
1382 ret = hib_wait_io(&hb);
1383 if (ret)
1384 goto out_finish;
1385 have += asked;
1386 asked = 0;
1387 if (eof)
1388 eof = 2;
1389 }
1390
1391 for (run_threads = thr, thr = 0; thr < run_threads; thr++) {
1392 wait_event(data[thr].done,
1393 atomic_read_acquire(&data[thr].stop));
1394 atomic_set(&data[thr].stop, 0);
1395
1396 ret = data[thr].ret;
1397
1398 if (ret < 0) {
1399 pr_err("LZO decompression failed\n");
1400 goto out_finish;
1401 }
1402
1403 if (unlikely(!data[thr].unc_len ||
1404 data[thr].unc_len > LZO_UNC_SIZE ||
1405 data[thr].unc_len & (PAGE_SIZE - 1))) {
1406 pr_err("Invalid LZO uncompressed length\n");
1407 ret = -1;
1408 goto out_finish;
1409 }
1410
1411 for (off = 0;
1412 off < data[thr].unc_len; off += PAGE_SIZE) {
1413 memcpy(data_of(*snapshot),
1414 data[thr].unc + off, PAGE_SIZE);
1415
1416 if (!(nr_pages % m))
1417 pr_info("Image loading progress: %3d%%\n",
1418 nr_pages / m * 10);
1419 nr_pages++;
1420
1421 ret = snapshot_write_next(snapshot);
1422 if (ret <= 0) {
1423 crc->run_threads = thr + 1;
1424 atomic_set_release(&crc->ready, 1);
1425 wake_up(&crc->go);
1426 goto out_finish;
1427 }
1428 }
1429 }
1430
1431 crc->run_threads = thr;
1432 atomic_set_release(&crc->ready, 1);
1433 wake_up(&crc->go);
1434 }
1435
1436out_finish:
1437 if (crc->run_threads) {
1438 wait_event(crc->done, atomic_read_acquire(&crc->stop));
1439 atomic_set(&crc->stop, 0);
1440 }
1441 stop = ktime_get();
1442 if (!ret) {
1443 pr_info("Image loading done\n");
1444 snapshot_write_finalize(snapshot);
1445 if (!snapshot_image_loaded(snapshot))
1446 ret = -ENODATA;
1447 if (!ret) {
1448 if (swsusp_header->flags & SF_CRC32_MODE) {
1449 if(handle->crc32 != swsusp_header->crc32) {
1450 pr_err("Invalid image CRC32!\n");
1451 ret = -ENODATA;
1452 }
1453 }
1454 }
1455 }
1456 swsusp_show_speed(start, stop, nr_to_read, "Read");
1457out_clean:
1458 hib_finish_batch(&hb);
1459 for (i = 0; i < ring_size; i++)
1460 free_page((unsigned long)page[i]);
1461 if (crc) {
1462 if (crc->thr)
1463 kthread_stop(crc->thr);
1464 kfree(crc);
1465 }
1466 if (data) {
1467 for (thr = 0; thr < nr_threads; thr++)
1468 if (data[thr].thr)
1469 kthread_stop(data[thr].thr);
1470 vfree(data);
1471 }
1472 vfree(page);
1473
1474 return ret;
1475}
1476
1477/**
1478 * swsusp_read - read the hibernation image.
1479 * @flags_p: flags passed by the "frozen" kernel in the image header should
1480 * be written into this memory location
1481 */
1482
1483int swsusp_read(unsigned int *flags_p)
1484{
1485 int error;
1486 struct swap_map_handle handle;
1487 struct snapshot_handle snapshot;
1488 struct swsusp_info *header;
1489
1490 memset(&snapshot, 0, sizeof(struct snapshot_handle));
1491 error = snapshot_write_next(&snapshot);
1492 if (error < (int)PAGE_SIZE)
1493 return error < 0 ? error : -EFAULT;
1494 header = (struct swsusp_info *)data_of(snapshot);
1495 error = get_swap_reader(&handle, flags_p);
1496 if (error)
1497 goto end;
1498 if (!error)
1499 error = swap_read_page(&handle, header, NULL);
1500 if (!error) {
1501 error = (*flags_p & SF_NOCOMPRESS_MODE) ?
1502 load_image(&handle, &snapshot, header->pages - 1) :
1503 load_image_lzo(&handle, &snapshot, header->pages - 1);
1504 }
1505 swap_reader_finish(&handle);
1506end:
1507 if (!error)
1508 pr_debug("Image successfully loaded\n");
1509 else
1510 pr_debug("Error %d resuming\n", error);
1511 return error;
1512}
1513
1514static void *swsusp_holder;
1515
1516/**
1517 * swsusp_check - Open the resume device and check for the swsusp signature.
1518 * @exclusive: Open the resume device exclusively.
1519 */
1520
1521int swsusp_check(bool exclusive)
1522{
1523 void *holder = exclusive ? &swsusp_holder : NULL;
1524 int error;
1525
1526 hib_resume_bdev_handle = bdev_open_by_dev(swsusp_resume_device,
1527 BLK_OPEN_READ, holder, NULL);
1528 if (!IS_ERR(hib_resume_bdev_handle)) {
1529 set_blocksize(hib_resume_bdev_handle->bdev, PAGE_SIZE);
1530 clear_page(swsusp_header);
1531 error = hib_submit_io(REQ_OP_READ, swsusp_resume_block,
1532 swsusp_header, NULL);
1533 if (error)
1534 goto put;
1535
1536 if (!memcmp(HIBERNATE_SIG, swsusp_header->sig, 10)) {
1537 memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10);
1538 /* Reset swap signature now */
1539 error = hib_submit_io(REQ_OP_WRITE | REQ_SYNC,
1540 swsusp_resume_block,
1541 swsusp_header, NULL);
1542 } else {
1543 error = -EINVAL;
1544 }
1545 if (!error && swsusp_header->flags & SF_HW_SIG &&
1546 swsusp_header->hw_sig != swsusp_hardware_signature) {
1547 pr_info("Suspend image hardware signature mismatch (%08x now %08x); aborting resume.\n",
1548 swsusp_header->hw_sig, swsusp_hardware_signature);
1549 error = -EINVAL;
1550 }
1551
1552put:
1553 if (error)
1554 bdev_release(hib_resume_bdev_handle);
1555 else
1556 pr_debug("Image signature found, resuming\n");
1557 } else {
1558 error = PTR_ERR(hib_resume_bdev_handle);
1559 }
1560
1561 if (error)
1562 pr_debug("Image not found (code %d)\n", error);
1563
1564 return error;
1565}
1566
1567/**
1568 * swsusp_close - close resume device.
1569 */
1570
1571void swsusp_close(void)
1572{
1573 if (IS_ERR(hib_resume_bdev_handle)) {
1574 pr_debug("Image device not initialised\n");
1575 return;
1576 }
1577
1578 bdev_release(hib_resume_bdev_handle);
1579}
1580
1581/**
1582 * swsusp_unmark - Unmark swsusp signature in the resume device
1583 */
1584
1585#ifdef CONFIG_SUSPEND
1586int swsusp_unmark(void)
1587{
1588 int error;
1589
1590 hib_submit_io(REQ_OP_READ, swsusp_resume_block,
1591 swsusp_header, NULL);
1592 if (!memcmp(HIBERNATE_SIG,swsusp_header->sig, 10)) {
1593 memcpy(swsusp_header->sig,swsusp_header->orig_sig, 10);
1594 error = hib_submit_io(REQ_OP_WRITE | REQ_SYNC,
1595 swsusp_resume_block,
1596 swsusp_header, NULL);
1597 } else {
1598 pr_err("Cannot find swsusp signature!\n");
1599 error = -ENODEV;
1600 }
1601
1602 /*
1603 * We just returned from suspend, we don't need the image any more.
1604 */
1605 free_all_swap_pages(root_swap);
1606
1607 return error;
1608}
1609#endif
1610
1611static int __init swsusp_header_init(void)
1612{
1613 swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL);
1614 if (!swsusp_header)
1615 panic("Could not allocate memory for swsusp_header\n");
1616 return 0;
1617}
1618
1619core_initcall(swsusp_header_init);