Loading...
1// SPDX-License-Identifier: GPL-2.0+
2// Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3// Copyright (C) 2008 Juergen Beisert
4
5#include <linux/clk.h>
6#include <linux/completion.h>
7#include <linux/delay.h>
8#include <linux/dmaengine.h>
9#include <linux/dma-mapping.h>
10#include <linux/err.h>
11#include <linux/interrupt.h>
12#include <linux/io.h>
13#include <linux/irq.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/pinctrl/consumer.h>
17#include <linux/platform_device.h>
18#include <linux/pm_runtime.h>
19#include <linux/slab.h>
20#include <linux/spi/spi.h>
21#include <linux/types.h>
22#include <linux/of.h>
23#include <linux/of_device.h>
24#include <linux/property.h>
25
26#include <linux/dma/imx-dma.h>
27
28#define DRIVER_NAME "spi_imx"
29
30static bool use_dma = true;
31module_param(use_dma, bool, 0644);
32MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
33
34/* define polling limits */
35static unsigned int polling_limit_us = 30;
36module_param(polling_limit_us, uint, 0664);
37MODULE_PARM_DESC(polling_limit_us,
38 "time in us to run a transfer in polling mode\n");
39
40#define MXC_RPM_TIMEOUT 2000 /* 2000ms */
41
42#define MXC_CSPIRXDATA 0x00
43#define MXC_CSPITXDATA 0x04
44#define MXC_CSPICTRL 0x08
45#define MXC_CSPIINT 0x0c
46#define MXC_RESET 0x1c
47
48/* generic defines to abstract from the different register layouts */
49#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
50#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
51#define MXC_INT_RDR BIT(4) /* Receive date threshold interrupt */
52
53/* The maximum bytes that a sdma BD can transfer. */
54#define MAX_SDMA_BD_BYTES (1 << 15)
55#define MX51_ECSPI_CTRL_MAX_BURST 512
56/* The maximum bytes that IMX53_ECSPI can transfer in slave mode.*/
57#define MX53_MAX_TRANSFER_BYTES 512
58
59enum spi_imx_devtype {
60 IMX1_CSPI,
61 IMX21_CSPI,
62 IMX27_CSPI,
63 IMX31_CSPI,
64 IMX35_CSPI, /* CSPI on all i.mx except above */
65 IMX51_ECSPI, /* ECSPI on i.mx51 */
66 IMX53_ECSPI, /* ECSPI on i.mx53 and later */
67};
68
69struct spi_imx_data;
70
71struct spi_imx_devtype_data {
72 void (*intctrl)(struct spi_imx_data *spi_imx, int enable);
73 int (*prepare_message)(struct spi_imx_data *spi_imx, struct spi_message *msg);
74 int (*prepare_transfer)(struct spi_imx_data *spi_imx, struct spi_device *spi);
75 void (*trigger)(struct spi_imx_data *spi_imx);
76 int (*rx_available)(struct spi_imx_data *spi_imx);
77 void (*reset)(struct spi_imx_data *spi_imx);
78 void (*setup_wml)(struct spi_imx_data *spi_imx);
79 void (*disable)(struct spi_imx_data *spi_imx);
80 bool has_dmamode;
81 bool has_slavemode;
82 unsigned int fifo_size;
83 bool dynamic_burst;
84 /*
85 * ERR009165 fixed or not:
86 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
87 */
88 bool tx_glitch_fixed;
89 enum spi_imx_devtype devtype;
90};
91
92struct spi_imx_data {
93 struct spi_controller *controller;
94 struct device *dev;
95
96 struct completion xfer_done;
97 void __iomem *base;
98 unsigned long base_phys;
99
100 struct clk *clk_per;
101 struct clk *clk_ipg;
102 unsigned long spi_clk;
103 unsigned int spi_bus_clk;
104
105 unsigned int bits_per_word;
106 unsigned int spi_drctl;
107
108 unsigned int count, remainder;
109 void (*tx)(struct spi_imx_data *spi_imx);
110 void (*rx)(struct spi_imx_data *spi_imx);
111 void *rx_buf;
112 const void *tx_buf;
113 unsigned int txfifo; /* number of words pushed in tx FIFO */
114 unsigned int dynamic_burst;
115 bool rx_only;
116
117 /* Slave mode */
118 bool slave_mode;
119 bool slave_aborted;
120 unsigned int slave_burst;
121
122 /* DMA */
123 bool usedma;
124 u32 wml;
125 struct completion dma_rx_completion;
126 struct completion dma_tx_completion;
127
128 const struct spi_imx_devtype_data *devtype_data;
129};
130
131static inline int is_imx27_cspi(struct spi_imx_data *d)
132{
133 return d->devtype_data->devtype == IMX27_CSPI;
134}
135
136static inline int is_imx35_cspi(struct spi_imx_data *d)
137{
138 return d->devtype_data->devtype == IMX35_CSPI;
139}
140
141static inline int is_imx51_ecspi(struct spi_imx_data *d)
142{
143 return d->devtype_data->devtype == IMX51_ECSPI;
144}
145
146static inline int is_imx53_ecspi(struct spi_imx_data *d)
147{
148 return d->devtype_data->devtype == IMX53_ECSPI;
149}
150
151#define MXC_SPI_BUF_RX(type) \
152static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
153{ \
154 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
155 \
156 if (spi_imx->rx_buf) { \
157 *(type *)spi_imx->rx_buf = val; \
158 spi_imx->rx_buf += sizeof(type); \
159 } \
160 \
161 spi_imx->remainder -= sizeof(type); \
162}
163
164#define MXC_SPI_BUF_TX(type) \
165static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
166{ \
167 type val = 0; \
168 \
169 if (spi_imx->tx_buf) { \
170 val = *(type *)spi_imx->tx_buf; \
171 spi_imx->tx_buf += sizeof(type); \
172 } \
173 \
174 spi_imx->count -= sizeof(type); \
175 \
176 writel(val, spi_imx->base + MXC_CSPITXDATA); \
177}
178
179MXC_SPI_BUF_RX(u8)
180MXC_SPI_BUF_TX(u8)
181MXC_SPI_BUF_RX(u16)
182MXC_SPI_BUF_TX(u16)
183MXC_SPI_BUF_RX(u32)
184MXC_SPI_BUF_TX(u32)
185
186/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
187 * (which is currently not the case in this driver)
188 */
189static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
190 256, 384, 512, 768, 1024};
191
192/* MX21, MX27 */
193static unsigned int spi_imx_clkdiv_1(unsigned int fin,
194 unsigned int fspi, unsigned int max, unsigned int *fres)
195{
196 int i;
197
198 for (i = 2; i < max; i++)
199 if (fspi * mxc_clkdivs[i] >= fin)
200 break;
201
202 *fres = fin / mxc_clkdivs[i];
203 return i;
204}
205
206/* MX1, MX31, MX35, MX51 CSPI */
207static unsigned int spi_imx_clkdiv_2(unsigned int fin,
208 unsigned int fspi, unsigned int *fres)
209{
210 int i, div = 4;
211
212 for (i = 0; i < 7; i++) {
213 if (fspi * div >= fin)
214 goto out;
215 div <<= 1;
216 }
217
218out:
219 *fres = fin / div;
220 return i;
221}
222
223static int spi_imx_bytes_per_word(const int bits_per_word)
224{
225 if (bits_per_word <= 8)
226 return 1;
227 else if (bits_per_word <= 16)
228 return 2;
229 else
230 return 4;
231}
232
233static bool spi_imx_can_dma(struct spi_controller *controller, struct spi_device *spi,
234 struct spi_transfer *transfer)
235{
236 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
237
238 if (!use_dma || controller->fallback)
239 return false;
240
241 if (!controller->dma_rx)
242 return false;
243
244 if (spi_imx->slave_mode)
245 return false;
246
247 if (transfer->len < spi_imx->devtype_data->fifo_size)
248 return false;
249
250 spi_imx->dynamic_burst = 0;
251
252 return true;
253}
254
255#define MX51_ECSPI_CTRL 0x08
256#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
257#define MX51_ECSPI_CTRL_XCH (1 << 2)
258#define MX51_ECSPI_CTRL_SMC (1 << 3)
259#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
260#define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16)
261#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
262#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
263#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
264#define MX51_ECSPI_CTRL_BL_OFFSET 20
265#define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20)
266
267#define MX51_ECSPI_CONFIG 0x0c
268#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
269#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
270#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
271#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
272#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20))
273
274#define MX51_ECSPI_INT 0x10
275#define MX51_ECSPI_INT_TEEN (1 << 0)
276#define MX51_ECSPI_INT_RREN (1 << 3)
277#define MX51_ECSPI_INT_RDREN (1 << 4)
278
279#define MX51_ECSPI_DMA 0x14
280#define MX51_ECSPI_DMA_TX_WML(wml) ((wml) & 0x3f)
281#define MX51_ECSPI_DMA_RX_WML(wml) (((wml) & 0x3f) << 16)
282#define MX51_ECSPI_DMA_RXT_WML(wml) (((wml) & 0x3f) << 24)
283
284#define MX51_ECSPI_DMA_TEDEN (1 << 7)
285#define MX51_ECSPI_DMA_RXDEN (1 << 23)
286#define MX51_ECSPI_DMA_RXTDEN (1 << 31)
287
288#define MX51_ECSPI_STAT 0x18
289#define MX51_ECSPI_STAT_RR (1 << 3)
290
291#define MX51_ECSPI_TESTREG 0x20
292#define MX51_ECSPI_TESTREG_LBC BIT(31)
293
294static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
295{
296 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);
297
298 if (spi_imx->rx_buf) {
299#ifdef __LITTLE_ENDIAN
300 unsigned int bytes_per_word;
301
302 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
303 if (bytes_per_word == 1)
304 swab32s(&val);
305 else if (bytes_per_word == 2)
306 swahw32s(&val);
307#endif
308 *(u32 *)spi_imx->rx_buf = val;
309 spi_imx->rx_buf += sizeof(u32);
310 }
311
312 spi_imx->remainder -= sizeof(u32);
313}
314
315static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
316{
317 int unaligned;
318 u32 val;
319
320 unaligned = spi_imx->remainder % 4;
321
322 if (!unaligned) {
323 spi_imx_buf_rx_swap_u32(spi_imx);
324 return;
325 }
326
327 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
328 spi_imx_buf_rx_u16(spi_imx);
329 return;
330 }
331
332 val = readl(spi_imx->base + MXC_CSPIRXDATA);
333
334 while (unaligned--) {
335 if (spi_imx->rx_buf) {
336 *(u8 *)spi_imx->rx_buf = (val >> (8 * unaligned)) & 0xff;
337 spi_imx->rx_buf++;
338 }
339 spi_imx->remainder--;
340 }
341}
342
343static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
344{
345 u32 val = 0;
346#ifdef __LITTLE_ENDIAN
347 unsigned int bytes_per_word;
348#endif
349
350 if (spi_imx->tx_buf) {
351 val = *(u32 *)spi_imx->tx_buf;
352 spi_imx->tx_buf += sizeof(u32);
353 }
354
355 spi_imx->count -= sizeof(u32);
356#ifdef __LITTLE_ENDIAN
357 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
358
359 if (bytes_per_word == 1)
360 swab32s(&val);
361 else if (bytes_per_word == 2)
362 swahw32s(&val);
363#endif
364 writel(val, spi_imx->base + MXC_CSPITXDATA);
365}
366
367static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
368{
369 int unaligned;
370 u32 val = 0;
371
372 unaligned = spi_imx->count % 4;
373
374 if (!unaligned) {
375 spi_imx_buf_tx_swap_u32(spi_imx);
376 return;
377 }
378
379 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
380 spi_imx_buf_tx_u16(spi_imx);
381 return;
382 }
383
384 while (unaligned--) {
385 if (spi_imx->tx_buf) {
386 val |= *(u8 *)spi_imx->tx_buf << (8 * unaligned);
387 spi_imx->tx_buf++;
388 }
389 spi_imx->count--;
390 }
391
392 writel(val, spi_imx->base + MXC_CSPITXDATA);
393}
394
395static void mx53_ecspi_rx_slave(struct spi_imx_data *spi_imx)
396{
397 u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA));
398
399 if (spi_imx->rx_buf) {
400 int n_bytes = spi_imx->slave_burst % sizeof(val);
401
402 if (!n_bytes)
403 n_bytes = sizeof(val);
404
405 memcpy(spi_imx->rx_buf,
406 ((u8 *)&val) + sizeof(val) - n_bytes, n_bytes);
407
408 spi_imx->rx_buf += n_bytes;
409 spi_imx->slave_burst -= n_bytes;
410 }
411
412 spi_imx->remainder -= sizeof(u32);
413}
414
415static void mx53_ecspi_tx_slave(struct spi_imx_data *spi_imx)
416{
417 u32 val = 0;
418 int n_bytes = spi_imx->count % sizeof(val);
419
420 if (!n_bytes)
421 n_bytes = sizeof(val);
422
423 if (spi_imx->tx_buf) {
424 memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
425 spi_imx->tx_buf, n_bytes);
426 val = cpu_to_be32(val);
427 spi_imx->tx_buf += n_bytes;
428 }
429
430 spi_imx->count -= n_bytes;
431
432 writel(val, spi_imx->base + MXC_CSPITXDATA);
433}
434
435/* MX51 eCSPI */
436static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
437 unsigned int fspi, unsigned int *fres)
438{
439 /*
440 * there are two 4-bit dividers, the pre-divider divides by
441 * $pre, the post-divider by 2^$post
442 */
443 unsigned int pre, post;
444 unsigned int fin = spi_imx->spi_clk;
445
446 fspi = min(fspi, fin);
447
448 post = fls(fin) - fls(fspi);
449 if (fin > fspi << post)
450 post++;
451
452 /* now we have: (fin <= fspi << post) with post being minimal */
453
454 post = max(4U, post) - 4;
455 if (unlikely(post > 0xf)) {
456 dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
457 fspi, fin);
458 return 0xff;
459 }
460
461 pre = DIV_ROUND_UP(fin, fspi << post) - 1;
462
463 dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
464 __func__, fin, fspi, post, pre);
465
466 /* Resulting frequency for the SCLK line. */
467 *fres = (fin / (pre + 1)) >> post;
468
469 return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
470 (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
471}
472
473static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
474{
475 unsigned int val = 0;
476
477 if (enable & MXC_INT_TE)
478 val |= MX51_ECSPI_INT_TEEN;
479
480 if (enable & MXC_INT_RR)
481 val |= MX51_ECSPI_INT_RREN;
482
483 if (enable & MXC_INT_RDR)
484 val |= MX51_ECSPI_INT_RDREN;
485
486 writel(val, spi_imx->base + MX51_ECSPI_INT);
487}
488
489static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
490{
491 u32 reg;
492
493 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
494 reg |= MX51_ECSPI_CTRL_XCH;
495 writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
496}
497
498static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
499{
500 u32 ctrl;
501
502 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
503 ctrl &= ~MX51_ECSPI_CTRL_ENABLE;
504 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
505}
506
507static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
508 struct spi_message *msg)
509{
510 struct spi_device *spi = msg->spi;
511 struct spi_transfer *xfer;
512 u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
513 u32 min_speed_hz = ~0U;
514 u32 testreg, delay;
515 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
516 u32 current_cfg = cfg;
517
518 /* set Master or Slave mode */
519 if (spi_imx->slave_mode)
520 ctrl &= ~MX51_ECSPI_CTRL_MODE_MASK;
521 else
522 ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
523
524 /*
525 * Enable SPI_RDY handling (falling edge/level triggered).
526 */
527 if (spi->mode & SPI_READY)
528 ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
529
530 /* set chip select to use */
531 ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
532
533 /*
534 * The ctrl register must be written first, with the EN bit set other
535 * registers must not be written to.
536 */
537 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
538
539 testreg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
540 if (spi->mode & SPI_LOOP)
541 testreg |= MX51_ECSPI_TESTREG_LBC;
542 else
543 testreg &= ~MX51_ECSPI_TESTREG_LBC;
544 writel(testreg, spi_imx->base + MX51_ECSPI_TESTREG);
545
546 /*
547 * eCSPI burst completion by Chip Select signal in Slave mode
548 * is not functional for imx53 Soc, config SPI burst completed when
549 * BURST_LENGTH + 1 bits are received
550 */
551 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
552 cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
553 else
554 cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
555
556 if (spi->mode & SPI_CPOL) {
557 cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
558 cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
559 } else {
560 cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
561 cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
562 }
563
564 if (spi->mode & SPI_CS_HIGH)
565 cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
566 else
567 cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
568
569 if (cfg == current_cfg)
570 return 0;
571
572 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
573
574 /*
575 * Wait until the changes in the configuration register CONFIGREG
576 * propagate into the hardware. It takes exactly one tick of the
577 * SCLK clock, but we will wait two SCLK clock just to be sure. The
578 * effect of the delay it takes for the hardware to apply changes
579 * is noticable if the SCLK clock run very slow. In such a case, if
580 * the polarity of SCLK should be inverted, the GPIO ChipSelect might
581 * be asserted before the SCLK polarity changes, which would disrupt
582 * the SPI communication as the device on the other end would consider
583 * the change of SCLK polarity as a clock tick already.
584 *
585 * Because spi_imx->spi_bus_clk is only set in prepare_message
586 * callback, iterate over all the transfers in spi_message, find the
587 * one with lowest bus frequency, and use that bus frequency for the
588 * delay calculation. In case all transfers have speed_hz == 0, then
589 * min_speed_hz is ~0 and the resulting delay is zero.
590 */
591 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
592 if (!xfer->speed_hz)
593 continue;
594 min_speed_hz = min(xfer->speed_hz, min_speed_hz);
595 }
596
597 delay = (2 * 1000000) / min_speed_hz;
598 if (likely(delay < 10)) /* SCLK is faster than 200 kHz */
599 udelay(delay);
600 else /* SCLK is _very_ slow */
601 usleep_range(delay, delay + 10);
602
603 return 0;
604}
605
606static void mx51_configure_cpha(struct spi_imx_data *spi_imx,
607 struct spi_device *spi)
608{
609 bool cpha = (spi->mode & SPI_CPHA);
610 bool flip_cpha = (spi->mode & SPI_RX_CPHA_FLIP) && spi_imx->rx_only;
611 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
612
613 /* Flip cpha logical value iff flip_cpha */
614 cpha ^= flip_cpha;
615
616 if (cpha)
617 cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
618 else
619 cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
620
621 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
622}
623
624static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
625 struct spi_device *spi)
626{
627 u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
628 u32 clk;
629
630 /* Clear BL field and set the right value */
631 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
632 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
633 ctrl |= (spi_imx->slave_burst * 8 - 1)
634 << MX51_ECSPI_CTRL_BL_OFFSET;
635 else
636 ctrl |= (spi_imx->bits_per_word - 1)
637 << MX51_ECSPI_CTRL_BL_OFFSET;
638
639 /* set clock speed */
640 ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
641 0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
642 ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
643 spi_imx->spi_bus_clk = clk;
644
645 mx51_configure_cpha(spi_imx, spi);
646
647 /*
648 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
649 * before i.mx6ul.
650 */
651 if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
652 ctrl |= MX51_ECSPI_CTRL_SMC;
653 else
654 ctrl &= ~MX51_ECSPI_CTRL_SMC;
655
656 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
657
658 return 0;
659}
660
661static void mx51_setup_wml(struct spi_imx_data *spi_imx)
662{
663 u32 tx_wml = 0;
664
665 if (spi_imx->devtype_data->tx_glitch_fixed)
666 tx_wml = spi_imx->wml;
667 /*
668 * Configure the DMA register: setup the watermark
669 * and enable DMA request.
670 */
671 writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
672 MX51_ECSPI_DMA_TX_WML(tx_wml) |
673 MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
674 MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
675 MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
676}
677
678static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
679{
680 return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
681}
682
683static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
684{
685 /* drain receive buffer */
686 while (mx51_ecspi_rx_available(spi_imx))
687 readl(spi_imx->base + MXC_CSPIRXDATA);
688}
689
690#define MX31_INTREG_TEEN (1 << 0)
691#define MX31_INTREG_RREN (1 << 3)
692
693#define MX31_CSPICTRL_ENABLE (1 << 0)
694#define MX31_CSPICTRL_MASTER (1 << 1)
695#define MX31_CSPICTRL_XCH (1 << 2)
696#define MX31_CSPICTRL_SMC (1 << 3)
697#define MX31_CSPICTRL_POL (1 << 4)
698#define MX31_CSPICTRL_PHA (1 << 5)
699#define MX31_CSPICTRL_SSCTL (1 << 6)
700#define MX31_CSPICTRL_SSPOL (1 << 7)
701#define MX31_CSPICTRL_BC_SHIFT 8
702#define MX35_CSPICTRL_BL_SHIFT 20
703#define MX31_CSPICTRL_CS_SHIFT 24
704#define MX35_CSPICTRL_CS_SHIFT 12
705#define MX31_CSPICTRL_DR_SHIFT 16
706
707#define MX31_CSPI_DMAREG 0x10
708#define MX31_DMAREG_RH_DEN (1<<4)
709#define MX31_DMAREG_TH_DEN (1<<1)
710
711#define MX31_CSPISTATUS 0x14
712#define MX31_STATUS_RR (1 << 3)
713
714#define MX31_CSPI_TESTREG 0x1C
715#define MX31_TEST_LBC (1 << 14)
716
717/* These functions also work for the i.MX35, but be aware that
718 * the i.MX35 has a slightly different register layout for bits
719 * we do not use here.
720 */
721static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
722{
723 unsigned int val = 0;
724
725 if (enable & MXC_INT_TE)
726 val |= MX31_INTREG_TEEN;
727 if (enable & MXC_INT_RR)
728 val |= MX31_INTREG_RREN;
729
730 writel(val, spi_imx->base + MXC_CSPIINT);
731}
732
733static void mx31_trigger(struct spi_imx_data *spi_imx)
734{
735 unsigned int reg;
736
737 reg = readl(spi_imx->base + MXC_CSPICTRL);
738 reg |= MX31_CSPICTRL_XCH;
739 writel(reg, spi_imx->base + MXC_CSPICTRL);
740}
741
742static int mx31_prepare_message(struct spi_imx_data *spi_imx,
743 struct spi_message *msg)
744{
745 return 0;
746}
747
748static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
749 struct spi_device *spi)
750{
751 unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
752 unsigned int clk;
753
754 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
755 MX31_CSPICTRL_DR_SHIFT;
756 spi_imx->spi_bus_clk = clk;
757
758 if (is_imx35_cspi(spi_imx)) {
759 reg |= (spi_imx->bits_per_word - 1) << MX35_CSPICTRL_BL_SHIFT;
760 reg |= MX31_CSPICTRL_SSCTL;
761 } else {
762 reg |= (spi_imx->bits_per_word - 1) << MX31_CSPICTRL_BC_SHIFT;
763 }
764
765 if (spi->mode & SPI_CPHA)
766 reg |= MX31_CSPICTRL_PHA;
767 if (spi->mode & SPI_CPOL)
768 reg |= MX31_CSPICTRL_POL;
769 if (spi->mode & SPI_CS_HIGH)
770 reg |= MX31_CSPICTRL_SSPOL;
771 if (!spi->cs_gpiod)
772 reg |= (spi->chip_select) <<
773 (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
774 MX31_CSPICTRL_CS_SHIFT);
775
776 if (spi_imx->usedma)
777 reg |= MX31_CSPICTRL_SMC;
778
779 writel(reg, spi_imx->base + MXC_CSPICTRL);
780
781 reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
782 if (spi->mode & SPI_LOOP)
783 reg |= MX31_TEST_LBC;
784 else
785 reg &= ~MX31_TEST_LBC;
786 writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
787
788 if (spi_imx->usedma) {
789 /*
790 * configure DMA requests when RXFIFO is half full and
791 * when TXFIFO is half empty
792 */
793 writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
794 spi_imx->base + MX31_CSPI_DMAREG);
795 }
796
797 return 0;
798}
799
800static int mx31_rx_available(struct spi_imx_data *spi_imx)
801{
802 return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
803}
804
805static void mx31_reset(struct spi_imx_data *spi_imx)
806{
807 /* drain receive buffer */
808 while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
809 readl(spi_imx->base + MXC_CSPIRXDATA);
810}
811
812#define MX21_INTREG_RR (1 << 4)
813#define MX21_INTREG_TEEN (1 << 9)
814#define MX21_INTREG_RREN (1 << 13)
815
816#define MX21_CSPICTRL_POL (1 << 5)
817#define MX21_CSPICTRL_PHA (1 << 6)
818#define MX21_CSPICTRL_SSPOL (1 << 8)
819#define MX21_CSPICTRL_XCH (1 << 9)
820#define MX21_CSPICTRL_ENABLE (1 << 10)
821#define MX21_CSPICTRL_MASTER (1 << 11)
822#define MX21_CSPICTRL_DR_SHIFT 14
823#define MX21_CSPICTRL_CS_SHIFT 19
824
825static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
826{
827 unsigned int val = 0;
828
829 if (enable & MXC_INT_TE)
830 val |= MX21_INTREG_TEEN;
831 if (enable & MXC_INT_RR)
832 val |= MX21_INTREG_RREN;
833
834 writel(val, spi_imx->base + MXC_CSPIINT);
835}
836
837static void mx21_trigger(struct spi_imx_data *spi_imx)
838{
839 unsigned int reg;
840
841 reg = readl(spi_imx->base + MXC_CSPICTRL);
842 reg |= MX21_CSPICTRL_XCH;
843 writel(reg, spi_imx->base + MXC_CSPICTRL);
844}
845
846static int mx21_prepare_message(struct spi_imx_data *spi_imx,
847 struct spi_message *msg)
848{
849 return 0;
850}
851
852static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
853 struct spi_device *spi)
854{
855 unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
856 unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
857 unsigned int clk;
858
859 reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, spi_imx->spi_bus_clk, max, &clk)
860 << MX21_CSPICTRL_DR_SHIFT;
861 spi_imx->spi_bus_clk = clk;
862
863 reg |= spi_imx->bits_per_word - 1;
864
865 if (spi->mode & SPI_CPHA)
866 reg |= MX21_CSPICTRL_PHA;
867 if (spi->mode & SPI_CPOL)
868 reg |= MX21_CSPICTRL_POL;
869 if (spi->mode & SPI_CS_HIGH)
870 reg |= MX21_CSPICTRL_SSPOL;
871 if (!spi->cs_gpiod)
872 reg |= spi->chip_select << MX21_CSPICTRL_CS_SHIFT;
873
874 writel(reg, spi_imx->base + MXC_CSPICTRL);
875
876 return 0;
877}
878
879static int mx21_rx_available(struct spi_imx_data *spi_imx)
880{
881 return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
882}
883
884static void mx21_reset(struct spi_imx_data *spi_imx)
885{
886 writel(1, spi_imx->base + MXC_RESET);
887}
888
889#define MX1_INTREG_RR (1 << 3)
890#define MX1_INTREG_TEEN (1 << 8)
891#define MX1_INTREG_RREN (1 << 11)
892
893#define MX1_CSPICTRL_POL (1 << 4)
894#define MX1_CSPICTRL_PHA (1 << 5)
895#define MX1_CSPICTRL_XCH (1 << 8)
896#define MX1_CSPICTRL_ENABLE (1 << 9)
897#define MX1_CSPICTRL_MASTER (1 << 10)
898#define MX1_CSPICTRL_DR_SHIFT 13
899
900static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
901{
902 unsigned int val = 0;
903
904 if (enable & MXC_INT_TE)
905 val |= MX1_INTREG_TEEN;
906 if (enable & MXC_INT_RR)
907 val |= MX1_INTREG_RREN;
908
909 writel(val, spi_imx->base + MXC_CSPIINT);
910}
911
912static void mx1_trigger(struct spi_imx_data *spi_imx)
913{
914 unsigned int reg;
915
916 reg = readl(spi_imx->base + MXC_CSPICTRL);
917 reg |= MX1_CSPICTRL_XCH;
918 writel(reg, spi_imx->base + MXC_CSPICTRL);
919}
920
921static int mx1_prepare_message(struct spi_imx_data *spi_imx,
922 struct spi_message *msg)
923{
924 return 0;
925}
926
927static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
928 struct spi_device *spi)
929{
930 unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
931 unsigned int clk;
932
933 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
934 MX1_CSPICTRL_DR_SHIFT;
935 spi_imx->spi_bus_clk = clk;
936
937 reg |= spi_imx->bits_per_word - 1;
938
939 if (spi->mode & SPI_CPHA)
940 reg |= MX1_CSPICTRL_PHA;
941 if (spi->mode & SPI_CPOL)
942 reg |= MX1_CSPICTRL_POL;
943
944 writel(reg, spi_imx->base + MXC_CSPICTRL);
945
946 return 0;
947}
948
949static int mx1_rx_available(struct spi_imx_data *spi_imx)
950{
951 return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
952}
953
954static void mx1_reset(struct spi_imx_data *spi_imx)
955{
956 writel(1, spi_imx->base + MXC_RESET);
957}
958
959static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
960 .intctrl = mx1_intctrl,
961 .prepare_message = mx1_prepare_message,
962 .prepare_transfer = mx1_prepare_transfer,
963 .trigger = mx1_trigger,
964 .rx_available = mx1_rx_available,
965 .reset = mx1_reset,
966 .fifo_size = 8,
967 .has_dmamode = false,
968 .dynamic_burst = false,
969 .has_slavemode = false,
970 .devtype = IMX1_CSPI,
971};
972
973static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
974 .intctrl = mx21_intctrl,
975 .prepare_message = mx21_prepare_message,
976 .prepare_transfer = mx21_prepare_transfer,
977 .trigger = mx21_trigger,
978 .rx_available = mx21_rx_available,
979 .reset = mx21_reset,
980 .fifo_size = 8,
981 .has_dmamode = false,
982 .dynamic_burst = false,
983 .has_slavemode = false,
984 .devtype = IMX21_CSPI,
985};
986
987static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
988 /* i.mx27 cspi shares the functions with i.mx21 one */
989 .intctrl = mx21_intctrl,
990 .prepare_message = mx21_prepare_message,
991 .prepare_transfer = mx21_prepare_transfer,
992 .trigger = mx21_trigger,
993 .rx_available = mx21_rx_available,
994 .reset = mx21_reset,
995 .fifo_size = 8,
996 .has_dmamode = false,
997 .dynamic_burst = false,
998 .has_slavemode = false,
999 .devtype = IMX27_CSPI,
1000};
1001
1002static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
1003 .intctrl = mx31_intctrl,
1004 .prepare_message = mx31_prepare_message,
1005 .prepare_transfer = mx31_prepare_transfer,
1006 .trigger = mx31_trigger,
1007 .rx_available = mx31_rx_available,
1008 .reset = mx31_reset,
1009 .fifo_size = 8,
1010 .has_dmamode = false,
1011 .dynamic_burst = false,
1012 .has_slavemode = false,
1013 .devtype = IMX31_CSPI,
1014};
1015
1016static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
1017 /* i.mx35 and later cspi shares the functions with i.mx31 one */
1018 .intctrl = mx31_intctrl,
1019 .prepare_message = mx31_prepare_message,
1020 .prepare_transfer = mx31_prepare_transfer,
1021 .trigger = mx31_trigger,
1022 .rx_available = mx31_rx_available,
1023 .reset = mx31_reset,
1024 .fifo_size = 8,
1025 .has_dmamode = true,
1026 .dynamic_burst = false,
1027 .has_slavemode = false,
1028 .devtype = IMX35_CSPI,
1029};
1030
1031static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
1032 .intctrl = mx51_ecspi_intctrl,
1033 .prepare_message = mx51_ecspi_prepare_message,
1034 .prepare_transfer = mx51_ecspi_prepare_transfer,
1035 .trigger = mx51_ecspi_trigger,
1036 .rx_available = mx51_ecspi_rx_available,
1037 .reset = mx51_ecspi_reset,
1038 .setup_wml = mx51_setup_wml,
1039 .fifo_size = 64,
1040 .has_dmamode = true,
1041 .dynamic_burst = true,
1042 .has_slavemode = true,
1043 .disable = mx51_ecspi_disable,
1044 .devtype = IMX51_ECSPI,
1045};
1046
1047static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
1048 .intctrl = mx51_ecspi_intctrl,
1049 .prepare_message = mx51_ecspi_prepare_message,
1050 .prepare_transfer = mx51_ecspi_prepare_transfer,
1051 .trigger = mx51_ecspi_trigger,
1052 .rx_available = mx51_ecspi_rx_available,
1053 .reset = mx51_ecspi_reset,
1054 .fifo_size = 64,
1055 .has_dmamode = true,
1056 .has_slavemode = true,
1057 .disable = mx51_ecspi_disable,
1058 .devtype = IMX53_ECSPI,
1059};
1060
1061static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
1062 .intctrl = mx51_ecspi_intctrl,
1063 .prepare_message = mx51_ecspi_prepare_message,
1064 .prepare_transfer = mx51_ecspi_prepare_transfer,
1065 .trigger = mx51_ecspi_trigger,
1066 .rx_available = mx51_ecspi_rx_available,
1067 .reset = mx51_ecspi_reset,
1068 .setup_wml = mx51_setup_wml,
1069 .fifo_size = 64,
1070 .has_dmamode = true,
1071 .dynamic_burst = true,
1072 .has_slavemode = true,
1073 .tx_glitch_fixed = true,
1074 .disable = mx51_ecspi_disable,
1075 .devtype = IMX51_ECSPI,
1076};
1077
1078static const struct of_device_id spi_imx_dt_ids[] = {
1079 { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
1080 { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
1081 { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
1082 { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
1083 { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
1084 { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
1085 { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
1086 { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
1087 { /* sentinel */ }
1088};
1089MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
1090
1091static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
1092{
1093 u32 ctrl;
1094
1095 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
1096 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
1097 ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
1098 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
1099}
1100
1101static void spi_imx_push(struct spi_imx_data *spi_imx)
1102{
1103 unsigned int burst_len;
1104
1105 /*
1106 * Reload the FIFO when the remaining bytes to be transferred in the
1107 * current burst is 0. This only applies when bits_per_word is a
1108 * multiple of 8.
1109 */
1110 if (!spi_imx->remainder) {
1111 if (spi_imx->dynamic_burst) {
1112
1113 /* We need to deal unaligned data first */
1114 burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
1115
1116 if (!burst_len)
1117 burst_len = MX51_ECSPI_CTRL_MAX_BURST;
1118
1119 spi_imx_set_burst_len(spi_imx, burst_len * 8);
1120
1121 spi_imx->remainder = burst_len;
1122 } else {
1123 spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
1124 }
1125 }
1126
1127 while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
1128 if (!spi_imx->count)
1129 break;
1130 if (spi_imx->dynamic_burst &&
1131 spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
1132 break;
1133 spi_imx->tx(spi_imx);
1134 spi_imx->txfifo++;
1135 }
1136
1137 if (!spi_imx->slave_mode)
1138 spi_imx->devtype_data->trigger(spi_imx);
1139}
1140
1141static irqreturn_t spi_imx_isr(int irq, void *dev_id)
1142{
1143 struct spi_imx_data *spi_imx = dev_id;
1144
1145 while (spi_imx->txfifo &&
1146 spi_imx->devtype_data->rx_available(spi_imx)) {
1147 spi_imx->rx(spi_imx);
1148 spi_imx->txfifo--;
1149 }
1150
1151 if (spi_imx->count) {
1152 spi_imx_push(spi_imx);
1153 return IRQ_HANDLED;
1154 }
1155
1156 if (spi_imx->txfifo) {
1157 /* No data left to push, but still waiting for rx data,
1158 * enable receive data available interrupt.
1159 */
1160 spi_imx->devtype_data->intctrl(
1161 spi_imx, MXC_INT_RR);
1162 return IRQ_HANDLED;
1163 }
1164
1165 spi_imx->devtype_data->intctrl(spi_imx, 0);
1166 complete(&spi_imx->xfer_done);
1167
1168 return IRQ_HANDLED;
1169}
1170
1171static int spi_imx_dma_configure(struct spi_controller *controller)
1172{
1173 int ret;
1174 enum dma_slave_buswidth buswidth;
1175 struct dma_slave_config rx = {}, tx = {};
1176 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1177
1178 switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
1179 case 4:
1180 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
1181 break;
1182 case 2:
1183 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
1184 break;
1185 case 1:
1186 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
1187 break;
1188 default:
1189 return -EINVAL;
1190 }
1191
1192 tx.direction = DMA_MEM_TO_DEV;
1193 tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
1194 tx.dst_addr_width = buswidth;
1195 tx.dst_maxburst = spi_imx->wml;
1196 ret = dmaengine_slave_config(controller->dma_tx, &tx);
1197 if (ret) {
1198 dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
1199 return ret;
1200 }
1201
1202 rx.direction = DMA_DEV_TO_MEM;
1203 rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
1204 rx.src_addr_width = buswidth;
1205 rx.src_maxburst = spi_imx->wml;
1206 ret = dmaengine_slave_config(controller->dma_rx, &rx);
1207 if (ret) {
1208 dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
1209 return ret;
1210 }
1211
1212 return 0;
1213}
1214
1215static int spi_imx_setupxfer(struct spi_device *spi,
1216 struct spi_transfer *t)
1217{
1218 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1219
1220 if (!t)
1221 return 0;
1222
1223 if (!t->speed_hz) {
1224 if (!spi->max_speed_hz) {
1225 dev_err(&spi->dev, "no speed_hz provided!\n");
1226 return -EINVAL;
1227 }
1228 dev_dbg(&spi->dev, "using spi->max_speed_hz!\n");
1229 spi_imx->spi_bus_clk = spi->max_speed_hz;
1230 } else
1231 spi_imx->spi_bus_clk = t->speed_hz;
1232
1233 spi_imx->bits_per_word = t->bits_per_word;
1234
1235 /*
1236 * Initialize the functions for transfer. To transfer non byte-aligned
1237 * words, we have to use multiple word-size bursts, we can't use
1238 * dynamic_burst in that case.
1239 */
1240 if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
1241 !(spi->mode & SPI_CS_WORD) &&
1242 (spi_imx->bits_per_word == 8 ||
1243 spi_imx->bits_per_word == 16 ||
1244 spi_imx->bits_per_word == 32)) {
1245
1246 spi_imx->rx = spi_imx_buf_rx_swap;
1247 spi_imx->tx = spi_imx_buf_tx_swap;
1248 spi_imx->dynamic_burst = 1;
1249
1250 } else {
1251 if (spi_imx->bits_per_word <= 8) {
1252 spi_imx->rx = spi_imx_buf_rx_u8;
1253 spi_imx->tx = spi_imx_buf_tx_u8;
1254 } else if (spi_imx->bits_per_word <= 16) {
1255 spi_imx->rx = spi_imx_buf_rx_u16;
1256 spi_imx->tx = spi_imx_buf_tx_u16;
1257 } else {
1258 spi_imx->rx = spi_imx_buf_rx_u32;
1259 spi_imx->tx = spi_imx_buf_tx_u32;
1260 }
1261 spi_imx->dynamic_burst = 0;
1262 }
1263
1264 if (spi_imx_can_dma(spi_imx->controller, spi, t))
1265 spi_imx->usedma = true;
1266 else
1267 spi_imx->usedma = false;
1268
1269 spi_imx->rx_only = ((t->tx_buf == NULL)
1270 || (t->tx_buf == spi->controller->dummy_tx));
1271
1272 if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) {
1273 spi_imx->rx = mx53_ecspi_rx_slave;
1274 spi_imx->tx = mx53_ecspi_tx_slave;
1275 spi_imx->slave_burst = t->len;
1276 }
1277
1278 spi_imx->devtype_data->prepare_transfer(spi_imx, spi);
1279
1280 return 0;
1281}
1282
1283static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
1284{
1285 struct spi_controller *controller = spi_imx->controller;
1286
1287 if (controller->dma_rx) {
1288 dma_release_channel(controller->dma_rx);
1289 controller->dma_rx = NULL;
1290 }
1291
1292 if (controller->dma_tx) {
1293 dma_release_channel(controller->dma_tx);
1294 controller->dma_tx = NULL;
1295 }
1296}
1297
1298static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
1299 struct spi_controller *controller)
1300{
1301 int ret;
1302
1303 spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
1304
1305 /* Prepare for TX DMA: */
1306 controller->dma_tx = dma_request_chan(dev, "tx");
1307 if (IS_ERR(controller->dma_tx)) {
1308 ret = PTR_ERR(controller->dma_tx);
1309 dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
1310 controller->dma_tx = NULL;
1311 goto err;
1312 }
1313
1314 /* Prepare for RX : */
1315 controller->dma_rx = dma_request_chan(dev, "rx");
1316 if (IS_ERR(controller->dma_rx)) {
1317 ret = PTR_ERR(controller->dma_rx);
1318 dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
1319 controller->dma_rx = NULL;
1320 goto err;
1321 }
1322
1323 init_completion(&spi_imx->dma_rx_completion);
1324 init_completion(&spi_imx->dma_tx_completion);
1325 controller->can_dma = spi_imx_can_dma;
1326 controller->max_dma_len = MAX_SDMA_BD_BYTES;
1327 spi_imx->controller->flags = SPI_CONTROLLER_MUST_RX |
1328 SPI_CONTROLLER_MUST_TX;
1329
1330 return 0;
1331err:
1332 spi_imx_sdma_exit(spi_imx);
1333 return ret;
1334}
1335
1336static void spi_imx_dma_rx_callback(void *cookie)
1337{
1338 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1339
1340 complete(&spi_imx->dma_rx_completion);
1341}
1342
1343static void spi_imx_dma_tx_callback(void *cookie)
1344{
1345 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1346
1347 complete(&spi_imx->dma_tx_completion);
1348}
1349
1350static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1351{
1352 unsigned long timeout = 0;
1353
1354 /* Time with actual data transfer and CS change delay related to HW */
1355 timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1356
1357 /* Add extra second for scheduler related activities */
1358 timeout += 1;
1359
1360 /* Double calculated timeout */
1361 return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1362}
1363
1364static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1365 struct spi_transfer *transfer)
1366{
1367 struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1368 unsigned long transfer_timeout;
1369 unsigned long timeout;
1370 struct spi_controller *controller = spi_imx->controller;
1371 struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1372 struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
1373 unsigned int bytes_per_word, i;
1374 int ret;
1375
1376 /* Get the right burst length from the last sg to ensure no tail data */
1377 bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
1378 for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
1379 if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
1380 break;
1381 }
1382 /* Use 1 as wml in case no available burst length got */
1383 if (i == 0)
1384 i = 1;
1385
1386 spi_imx->wml = i;
1387
1388 ret = spi_imx_dma_configure(controller);
1389 if (ret)
1390 goto dma_failure_no_start;
1391
1392 if (!spi_imx->devtype_data->setup_wml) {
1393 dev_err(spi_imx->dev, "No setup_wml()?\n");
1394 ret = -EINVAL;
1395 goto dma_failure_no_start;
1396 }
1397 spi_imx->devtype_data->setup_wml(spi_imx);
1398
1399 /*
1400 * The TX DMA setup starts the transfer, so make sure RX is configured
1401 * before TX.
1402 */
1403 desc_rx = dmaengine_prep_slave_sg(controller->dma_rx,
1404 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1405 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1406 if (!desc_rx) {
1407 ret = -EINVAL;
1408 goto dma_failure_no_start;
1409 }
1410
1411 desc_rx->callback = spi_imx_dma_rx_callback;
1412 desc_rx->callback_param = (void *)spi_imx;
1413 dmaengine_submit(desc_rx);
1414 reinit_completion(&spi_imx->dma_rx_completion);
1415 dma_async_issue_pending(controller->dma_rx);
1416
1417 desc_tx = dmaengine_prep_slave_sg(controller->dma_tx,
1418 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1419 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1420 if (!desc_tx) {
1421 dmaengine_terminate_all(controller->dma_tx);
1422 dmaengine_terminate_all(controller->dma_rx);
1423 return -EINVAL;
1424 }
1425
1426 desc_tx->callback = spi_imx_dma_tx_callback;
1427 desc_tx->callback_param = (void *)spi_imx;
1428 dmaengine_submit(desc_tx);
1429 reinit_completion(&spi_imx->dma_tx_completion);
1430 dma_async_issue_pending(controller->dma_tx);
1431
1432 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1433
1434 /* Wait SDMA to finish the data transfer.*/
1435 timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1436 transfer_timeout);
1437 if (!timeout) {
1438 dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1439 dmaengine_terminate_all(controller->dma_tx);
1440 dmaengine_terminate_all(controller->dma_rx);
1441 return -ETIMEDOUT;
1442 }
1443
1444 timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1445 transfer_timeout);
1446 if (!timeout) {
1447 dev_err(&controller->dev, "I/O Error in DMA RX\n");
1448 spi_imx->devtype_data->reset(spi_imx);
1449 dmaengine_terminate_all(controller->dma_rx);
1450 return -ETIMEDOUT;
1451 }
1452
1453 return 0;
1454/* fallback to pio */
1455dma_failure_no_start:
1456 transfer->error |= SPI_TRANS_FAIL_NO_START;
1457 return ret;
1458}
1459
1460static int spi_imx_pio_transfer(struct spi_device *spi,
1461 struct spi_transfer *transfer)
1462{
1463 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1464 unsigned long transfer_timeout;
1465 unsigned long timeout;
1466
1467 spi_imx->tx_buf = transfer->tx_buf;
1468 spi_imx->rx_buf = transfer->rx_buf;
1469 spi_imx->count = transfer->len;
1470 spi_imx->txfifo = 0;
1471 spi_imx->remainder = 0;
1472
1473 reinit_completion(&spi_imx->xfer_done);
1474
1475 spi_imx_push(spi_imx);
1476
1477 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1478
1479 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1480
1481 timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1482 transfer_timeout);
1483 if (!timeout) {
1484 dev_err(&spi->dev, "I/O Error in PIO\n");
1485 spi_imx->devtype_data->reset(spi_imx);
1486 return -ETIMEDOUT;
1487 }
1488
1489 return 0;
1490}
1491
1492static int spi_imx_poll_transfer(struct spi_device *spi,
1493 struct spi_transfer *transfer)
1494{
1495 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1496 unsigned long timeout;
1497
1498 spi_imx->tx_buf = transfer->tx_buf;
1499 spi_imx->rx_buf = transfer->rx_buf;
1500 spi_imx->count = transfer->len;
1501 spi_imx->txfifo = 0;
1502 spi_imx->remainder = 0;
1503
1504 /* fill in the fifo before timeout calculations if we are
1505 * interrupted here, then the data is getting transferred by
1506 * the HW while we are interrupted
1507 */
1508 spi_imx_push(spi_imx);
1509
1510 timeout = spi_imx_calculate_timeout(spi_imx, transfer->len) + jiffies;
1511 while (spi_imx->txfifo) {
1512 /* RX */
1513 while (spi_imx->txfifo &&
1514 spi_imx->devtype_data->rx_available(spi_imx)) {
1515 spi_imx->rx(spi_imx);
1516 spi_imx->txfifo--;
1517 }
1518
1519 /* TX */
1520 if (spi_imx->count) {
1521 spi_imx_push(spi_imx);
1522 continue;
1523 }
1524
1525 if (spi_imx->txfifo &&
1526 time_after(jiffies, timeout)) {
1527
1528 dev_err_ratelimited(&spi->dev,
1529 "timeout period reached: jiffies: %lu- falling back to interrupt mode\n",
1530 jiffies - timeout);
1531
1532 /* fall back to interrupt mode */
1533 return spi_imx_pio_transfer(spi, transfer);
1534 }
1535 }
1536
1537 return 0;
1538}
1539
1540static int spi_imx_pio_transfer_slave(struct spi_device *spi,
1541 struct spi_transfer *transfer)
1542{
1543 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1544 int ret = 0;
1545
1546 if (is_imx53_ecspi(spi_imx) &&
1547 transfer->len > MX53_MAX_TRANSFER_BYTES) {
1548 dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
1549 MX53_MAX_TRANSFER_BYTES);
1550 return -EMSGSIZE;
1551 }
1552
1553 spi_imx->tx_buf = transfer->tx_buf;
1554 spi_imx->rx_buf = transfer->rx_buf;
1555 spi_imx->count = transfer->len;
1556 spi_imx->txfifo = 0;
1557 spi_imx->remainder = 0;
1558
1559 reinit_completion(&spi_imx->xfer_done);
1560 spi_imx->slave_aborted = false;
1561
1562 spi_imx_push(spi_imx);
1563
1564 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE | MXC_INT_RDR);
1565
1566 if (wait_for_completion_interruptible(&spi_imx->xfer_done) ||
1567 spi_imx->slave_aborted) {
1568 dev_dbg(&spi->dev, "interrupted\n");
1569 ret = -EINTR;
1570 }
1571
1572 /* ecspi has a HW issue when works in Slave mode,
1573 * after 64 words writtern to TXFIFO, even TXFIFO becomes empty,
1574 * ECSPI_TXDATA keeps shift out the last word data,
1575 * so we have to disable ECSPI when in slave mode after the
1576 * transfer completes
1577 */
1578 if (spi_imx->devtype_data->disable)
1579 spi_imx->devtype_data->disable(spi_imx);
1580
1581 return ret;
1582}
1583
1584static int spi_imx_transfer_one(struct spi_controller *controller,
1585 struct spi_device *spi,
1586 struct spi_transfer *transfer)
1587{
1588 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1589 unsigned long hz_per_byte, byte_limit;
1590
1591 spi_imx_setupxfer(spi, transfer);
1592 transfer->effective_speed_hz = spi_imx->spi_bus_clk;
1593
1594 /* flush rxfifo before transfer */
1595 while (spi_imx->devtype_data->rx_available(spi_imx))
1596 readl(spi_imx->base + MXC_CSPIRXDATA);
1597
1598 if (spi_imx->slave_mode)
1599 return spi_imx_pio_transfer_slave(spi, transfer);
1600
1601 /*
1602 * If we decided in spi_imx_can_dma() that we want to do a DMA
1603 * transfer, the SPI transfer has already been mapped, so we
1604 * have to do the DMA transfer here.
1605 */
1606 if (spi_imx->usedma)
1607 return spi_imx_dma_transfer(spi_imx, transfer);
1608 /*
1609 * Calculate the estimated time in us the transfer runs. Find
1610 * the number of Hz per byte per polling limit.
1611 */
1612 hz_per_byte = polling_limit_us ? ((8 + 4) * USEC_PER_SEC) / polling_limit_us : 0;
1613 byte_limit = hz_per_byte ? transfer->effective_speed_hz / hz_per_byte : 1;
1614
1615 /* run in polling mode for short transfers */
1616 if (transfer->len < byte_limit)
1617 return spi_imx_poll_transfer(spi, transfer);
1618
1619 return spi_imx_pio_transfer(spi, transfer);
1620}
1621
1622static int spi_imx_setup(struct spi_device *spi)
1623{
1624 dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1625 spi->mode, spi->bits_per_word, spi->max_speed_hz);
1626
1627 return 0;
1628}
1629
1630static void spi_imx_cleanup(struct spi_device *spi)
1631{
1632}
1633
1634static int
1635spi_imx_prepare_message(struct spi_controller *controller, struct spi_message *msg)
1636{
1637 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1638 int ret;
1639
1640 ret = pm_runtime_resume_and_get(spi_imx->dev);
1641 if (ret < 0) {
1642 dev_err(spi_imx->dev, "failed to enable clock\n");
1643 return ret;
1644 }
1645
1646 ret = spi_imx->devtype_data->prepare_message(spi_imx, msg);
1647 if (ret) {
1648 pm_runtime_mark_last_busy(spi_imx->dev);
1649 pm_runtime_put_autosuspend(spi_imx->dev);
1650 }
1651
1652 return ret;
1653}
1654
1655static int
1656spi_imx_unprepare_message(struct spi_controller *controller, struct spi_message *msg)
1657{
1658 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1659
1660 pm_runtime_mark_last_busy(spi_imx->dev);
1661 pm_runtime_put_autosuspend(spi_imx->dev);
1662 return 0;
1663}
1664
1665static int spi_imx_slave_abort(struct spi_controller *controller)
1666{
1667 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1668
1669 spi_imx->slave_aborted = true;
1670 complete(&spi_imx->xfer_done);
1671
1672 return 0;
1673}
1674
1675static int spi_imx_probe(struct platform_device *pdev)
1676{
1677 struct device_node *np = pdev->dev.of_node;
1678 struct spi_controller *controller;
1679 struct spi_imx_data *spi_imx;
1680 struct resource *res;
1681 int ret, irq, spi_drctl;
1682 const struct spi_imx_devtype_data *devtype_data =
1683 of_device_get_match_data(&pdev->dev);
1684 bool slave_mode;
1685 u32 val;
1686
1687 slave_mode = devtype_data->has_slavemode &&
1688 of_property_read_bool(np, "spi-slave");
1689 if (slave_mode)
1690 controller = spi_alloc_slave(&pdev->dev,
1691 sizeof(struct spi_imx_data));
1692 else
1693 controller = spi_alloc_master(&pdev->dev,
1694 sizeof(struct spi_imx_data));
1695 if (!controller)
1696 return -ENOMEM;
1697
1698 ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
1699 if ((ret < 0) || (spi_drctl >= 0x3)) {
1700 /* '11' is reserved */
1701 spi_drctl = 0;
1702 }
1703
1704 platform_set_drvdata(pdev, controller);
1705
1706 controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1707 controller->bus_num = np ? -1 : pdev->id;
1708 controller->use_gpio_descriptors = true;
1709
1710 spi_imx = spi_controller_get_devdata(controller);
1711 spi_imx->controller = controller;
1712 spi_imx->dev = &pdev->dev;
1713 spi_imx->slave_mode = slave_mode;
1714
1715 spi_imx->devtype_data = devtype_data;
1716
1717 /*
1718 * Get number of chip selects from device properties. This can be
1719 * coming from device tree or boardfiles, if it is not defined,
1720 * a default value of 3 chip selects will be used, as all the legacy
1721 * board files have <= 3 chip selects.
1722 */
1723 if (!device_property_read_u32(&pdev->dev, "num-cs", &val))
1724 controller->num_chipselect = val;
1725 else
1726 controller->num_chipselect = 3;
1727
1728 spi_imx->controller->transfer_one = spi_imx_transfer_one;
1729 spi_imx->controller->setup = spi_imx_setup;
1730 spi_imx->controller->cleanup = spi_imx_cleanup;
1731 spi_imx->controller->prepare_message = spi_imx_prepare_message;
1732 spi_imx->controller->unprepare_message = spi_imx_unprepare_message;
1733 spi_imx->controller->slave_abort = spi_imx_slave_abort;
1734 spi_imx->controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS;
1735
1736 if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
1737 is_imx53_ecspi(spi_imx))
1738 spi_imx->controller->mode_bits |= SPI_LOOP | SPI_READY;
1739
1740 if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx))
1741 spi_imx->controller->mode_bits |= SPI_RX_CPHA_FLIP;
1742
1743 if (is_imx51_ecspi(spi_imx) &&
1744 device_property_read_u32(&pdev->dev, "cs-gpios", NULL))
1745 /*
1746 * When using HW-CS implementing SPI_CS_WORD can be done by just
1747 * setting the burst length to the word size. This is
1748 * considerably faster than manually controlling the CS.
1749 */
1750 spi_imx->controller->mode_bits |= SPI_CS_WORD;
1751
1752 spi_imx->spi_drctl = spi_drctl;
1753
1754 init_completion(&spi_imx->xfer_done);
1755
1756 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1757 spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
1758 if (IS_ERR(spi_imx->base)) {
1759 ret = PTR_ERR(spi_imx->base);
1760 goto out_controller_put;
1761 }
1762 spi_imx->base_phys = res->start;
1763
1764 irq = platform_get_irq(pdev, 0);
1765 if (irq < 0) {
1766 ret = irq;
1767 goto out_controller_put;
1768 }
1769
1770 ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1771 dev_name(&pdev->dev), spi_imx);
1772 if (ret) {
1773 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1774 goto out_controller_put;
1775 }
1776
1777 spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1778 if (IS_ERR(spi_imx->clk_ipg)) {
1779 ret = PTR_ERR(spi_imx->clk_ipg);
1780 goto out_controller_put;
1781 }
1782
1783 spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1784 if (IS_ERR(spi_imx->clk_per)) {
1785 ret = PTR_ERR(spi_imx->clk_per);
1786 goto out_controller_put;
1787 }
1788
1789 ret = clk_prepare_enable(spi_imx->clk_per);
1790 if (ret)
1791 goto out_controller_put;
1792
1793 ret = clk_prepare_enable(spi_imx->clk_ipg);
1794 if (ret)
1795 goto out_put_per;
1796
1797 pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
1798 pm_runtime_use_autosuspend(spi_imx->dev);
1799 pm_runtime_get_noresume(spi_imx->dev);
1800 pm_runtime_set_active(spi_imx->dev);
1801 pm_runtime_enable(spi_imx->dev);
1802
1803 spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1804 /*
1805 * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1806 * if validated on other chips.
1807 */
1808 if (spi_imx->devtype_data->has_dmamode) {
1809 ret = spi_imx_sdma_init(&pdev->dev, spi_imx, controller);
1810 if (ret == -EPROBE_DEFER)
1811 goto out_runtime_pm_put;
1812
1813 if (ret < 0)
1814 dev_dbg(&pdev->dev, "dma setup error %d, use pio\n",
1815 ret);
1816 }
1817
1818 spi_imx->devtype_data->reset(spi_imx);
1819
1820 spi_imx->devtype_data->intctrl(spi_imx, 0);
1821
1822 controller->dev.of_node = pdev->dev.of_node;
1823 ret = spi_register_controller(controller);
1824 if (ret) {
1825 dev_err_probe(&pdev->dev, ret, "register controller failed\n");
1826 goto out_register_controller;
1827 }
1828
1829 pm_runtime_mark_last_busy(spi_imx->dev);
1830 pm_runtime_put_autosuspend(spi_imx->dev);
1831
1832 return ret;
1833
1834out_register_controller:
1835 if (spi_imx->devtype_data->has_dmamode)
1836 spi_imx_sdma_exit(spi_imx);
1837out_runtime_pm_put:
1838 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1839 pm_runtime_set_suspended(&pdev->dev);
1840 pm_runtime_disable(spi_imx->dev);
1841
1842 clk_disable_unprepare(spi_imx->clk_ipg);
1843out_put_per:
1844 clk_disable_unprepare(spi_imx->clk_per);
1845out_controller_put:
1846 spi_controller_put(controller);
1847
1848 return ret;
1849}
1850
1851static int spi_imx_remove(struct platform_device *pdev)
1852{
1853 struct spi_controller *controller = platform_get_drvdata(pdev);
1854 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1855 int ret;
1856
1857 spi_unregister_controller(controller);
1858
1859 ret = pm_runtime_resume_and_get(spi_imx->dev);
1860 if (ret < 0) {
1861 dev_err(spi_imx->dev, "failed to enable clock\n");
1862 return ret;
1863 }
1864
1865 writel(0, spi_imx->base + MXC_CSPICTRL);
1866
1867 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1868 pm_runtime_put_sync(spi_imx->dev);
1869 pm_runtime_disable(spi_imx->dev);
1870
1871 spi_imx_sdma_exit(spi_imx);
1872
1873 return 0;
1874}
1875
1876static int __maybe_unused spi_imx_runtime_resume(struct device *dev)
1877{
1878 struct spi_controller *controller = dev_get_drvdata(dev);
1879 struct spi_imx_data *spi_imx;
1880 int ret;
1881
1882 spi_imx = spi_controller_get_devdata(controller);
1883
1884 ret = clk_prepare_enable(spi_imx->clk_per);
1885 if (ret)
1886 return ret;
1887
1888 ret = clk_prepare_enable(spi_imx->clk_ipg);
1889 if (ret) {
1890 clk_disable_unprepare(spi_imx->clk_per);
1891 return ret;
1892 }
1893
1894 return 0;
1895}
1896
1897static int __maybe_unused spi_imx_runtime_suspend(struct device *dev)
1898{
1899 struct spi_controller *controller = dev_get_drvdata(dev);
1900 struct spi_imx_data *spi_imx;
1901
1902 spi_imx = spi_controller_get_devdata(controller);
1903
1904 clk_disable_unprepare(spi_imx->clk_per);
1905 clk_disable_unprepare(spi_imx->clk_ipg);
1906
1907 return 0;
1908}
1909
1910static int __maybe_unused spi_imx_suspend(struct device *dev)
1911{
1912 pinctrl_pm_select_sleep_state(dev);
1913 return 0;
1914}
1915
1916static int __maybe_unused spi_imx_resume(struct device *dev)
1917{
1918 pinctrl_pm_select_default_state(dev);
1919 return 0;
1920}
1921
1922static const struct dev_pm_ops imx_spi_pm = {
1923 SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend,
1924 spi_imx_runtime_resume, NULL)
1925 SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume)
1926};
1927
1928static struct platform_driver spi_imx_driver = {
1929 .driver = {
1930 .name = DRIVER_NAME,
1931 .of_match_table = spi_imx_dt_ids,
1932 .pm = &imx_spi_pm,
1933 },
1934 .probe = spi_imx_probe,
1935 .remove = spi_imx_remove,
1936};
1937module_platform_driver(spi_imx_driver);
1938
1939MODULE_DESCRIPTION("i.MX SPI Controller driver");
1940MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1941MODULE_LICENSE("GPL");
1942MODULE_ALIAS("platform:" DRIVER_NAME);
1// SPDX-License-Identifier: GPL-2.0+
2// Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3// Copyright (C) 2008 Juergen Beisert
4
5#include <linux/clk.h>
6#include <linux/completion.h>
7#include <linux/delay.h>
8#include <linux/dmaengine.h>
9#include <linux/dma-mapping.h>
10#include <linux/err.h>
11#include <linux/interrupt.h>
12#include <linux/io.h>
13#include <linux/irq.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/pinctrl/consumer.h>
17#include <linux/platform_device.h>
18#include <linux/pm_runtime.h>
19#include <linux/slab.h>
20#include <linux/spi/spi.h>
21#include <linux/spi/spi_bitbang.h>
22#include <linux/types.h>
23#include <linux/of.h>
24#include <linux/of_device.h>
25#include <linux/property.h>
26
27#include <linux/platform_data/dma-imx.h>
28
29#define DRIVER_NAME "spi_imx"
30
31static bool use_dma = true;
32module_param(use_dma, bool, 0644);
33MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
34
35#define MXC_RPM_TIMEOUT 2000 /* 2000ms */
36
37#define MXC_CSPIRXDATA 0x00
38#define MXC_CSPITXDATA 0x04
39#define MXC_CSPICTRL 0x08
40#define MXC_CSPIINT 0x0c
41#define MXC_RESET 0x1c
42
43/* generic defines to abstract from the different register layouts */
44#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
45#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
46#define MXC_INT_RDR BIT(4) /* Receive date threshold interrupt */
47
48/* The maximum bytes that a sdma BD can transfer. */
49#define MAX_SDMA_BD_BYTES (1 << 15)
50#define MX51_ECSPI_CTRL_MAX_BURST 512
51/* The maximum bytes that IMX53_ECSPI can transfer in slave mode.*/
52#define MX53_MAX_TRANSFER_BYTES 512
53
54enum spi_imx_devtype {
55 IMX1_CSPI,
56 IMX21_CSPI,
57 IMX27_CSPI,
58 IMX31_CSPI,
59 IMX35_CSPI, /* CSPI on all i.mx except above */
60 IMX51_ECSPI, /* ECSPI on i.mx51 */
61 IMX53_ECSPI, /* ECSPI on i.mx53 and later */
62};
63
64struct spi_imx_data;
65
66struct spi_imx_devtype_data {
67 void (*intctrl)(struct spi_imx_data *, int);
68 int (*prepare_message)(struct spi_imx_data *, struct spi_message *);
69 int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *,
70 struct spi_transfer *);
71 void (*trigger)(struct spi_imx_data *);
72 int (*rx_available)(struct spi_imx_data *);
73 void (*reset)(struct spi_imx_data *);
74 void (*setup_wml)(struct spi_imx_data *);
75 void (*disable)(struct spi_imx_data *);
76 void (*disable_dma)(struct spi_imx_data *);
77 bool has_dmamode;
78 bool has_slavemode;
79 unsigned int fifo_size;
80 bool dynamic_burst;
81 enum spi_imx_devtype devtype;
82};
83
84struct spi_imx_data {
85 struct spi_bitbang bitbang;
86 struct device *dev;
87
88 struct completion xfer_done;
89 void __iomem *base;
90 unsigned long base_phys;
91
92 struct clk *clk_per;
93 struct clk *clk_ipg;
94 unsigned long spi_clk;
95 unsigned int spi_bus_clk;
96
97 unsigned int bits_per_word;
98 unsigned int spi_drctl;
99
100 unsigned int count, remainder;
101 void (*tx)(struct spi_imx_data *);
102 void (*rx)(struct spi_imx_data *);
103 void *rx_buf;
104 const void *tx_buf;
105 unsigned int txfifo; /* number of words pushed in tx FIFO */
106 unsigned int dynamic_burst;
107
108 /* Slave mode */
109 bool slave_mode;
110 bool slave_aborted;
111 unsigned int slave_burst;
112
113 /* DMA */
114 bool usedma;
115 u32 wml;
116 struct completion dma_rx_completion;
117 struct completion dma_tx_completion;
118
119 const struct spi_imx_devtype_data *devtype_data;
120};
121
122static inline int is_imx27_cspi(struct spi_imx_data *d)
123{
124 return d->devtype_data->devtype == IMX27_CSPI;
125}
126
127static inline int is_imx35_cspi(struct spi_imx_data *d)
128{
129 return d->devtype_data->devtype == IMX35_CSPI;
130}
131
132static inline int is_imx51_ecspi(struct spi_imx_data *d)
133{
134 return d->devtype_data->devtype == IMX51_ECSPI;
135}
136
137static inline int is_imx53_ecspi(struct spi_imx_data *d)
138{
139 return d->devtype_data->devtype == IMX53_ECSPI;
140}
141
142#define MXC_SPI_BUF_RX(type) \
143static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
144{ \
145 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
146 \
147 if (spi_imx->rx_buf) { \
148 *(type *)spi_imx->rx_buf = val; \
149 spi_imx->rx_buf += sizeof(type); \
150 } \
151 \
152 spi_imx->remainder -= sizeof(type); \
153}
154
155#define MXC_SPI_BUF_TX(type) \
156static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
157{ \
158 type val = 0; \
159 \
160 if (spi_imx->tx_buf) { \
161 val = *(type *)spi_imx->tx_buf; \
162 spi_imx->tx_buf += sizeof(type); \
163 } \
164 \
165 spi_imx->count -= sizeof(type); \
166 \
167 writel(val, spi_imx->base + MXC_CSPITXDATA); \
168}
169
170MXC_SPI_BUF_RX(u8)
171MXC_SPI_BUF_TX(u8)
172MXC_SPI_BUF_RX(u16)
173MXC_SPI_BUF_TX(u16)
174MXC_SPI_BUF_RX(u32)
175MXC_SPI_BUF_TX(u32)
176
177/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
178 * (which is currently not the case in this driver)
179 */
180static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
181 256, 384, 512, 768, 1024};
182
183/* MX21, MX27 */
184static unsigned int spi_imx_clkdiv_1(unsigned int fin,
185 unsigned int fspi, unsigned int max, unsigned int *fres)
186{
187 int i;
188
189 for (i = 2; i < max; i++)
190 if (fspi * mxc_clkdivs[i] >= fin)
191 break;
192
193 *fres = fin / mxc_clkdivs[i];
194 return i;
195}
196
197/* MX1, MX31, MX35, MX51 CSPI */
198static unsigned int spi_imx_clkdiv_2(unsigned int fin,
199 unsigned int fspi, unsigned int *fres)
200{
201 int i, div = 4;
202
203 for (i = 0; i < 7; i++) {
204 if (fspi * div >= fin)
205 goto out;
206 div <<= 1;
207 }
208
209out:
210 *fres = fin / div;
211 return i;
212}
213
214static int spi_imx_bytes_per_word(const int bits_per_word)
215{
216 if (bits_per_word <= 8)
217 return 1;
218 else if (bits_per_word <= 16)
219 return 2;
220 else
221 return 4;
222}
223
224static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
225 struct spi_transfer *transfer)
226{
227 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
228
229 if (!use_dma || master->fallback)
230 return false;
231
232 if (!master->dma_rx)
233 return false;
234
235 if (spi_imx->slave_mode)
236 return false;
237
238 if (transfer->len < spi_imx->devtype_data->fifo_size)
239 return false;
240
241 spi_imx->dynamic_burst = 0;
242
243 return true;
244}
245
246#define MX51_ECSPI_CTRL 0x08
247#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
248#define MX51_ECSPI_CTRL_XCH (1 << 2)
249#define MX51_ECSPI_CTRL_SMC (1 << 3)
250#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
251#define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16)
252#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
253#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
254#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
255#define MX51_ECSPI_CTRL_BL_OFFSET 20
256#define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20)
257
258#define MX51_ECSPI_CONFIG 0x0c
259#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
260#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
261#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
262#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
263#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20))
264
265#define MX51_ECSPI_INT 0x10
266#define MX51_ECSPI_INT_TEEN (1 << 0)
267#define MX51_ECSPI_INT_RREN (1 << 3)
268#define MX51_ECSPI_INT_RDREN (1 << 4)
269
270#define MX51_ECSPI_DMA 0x14
271#define MX51_ECSPI_DMA_TX_WML(wml) ((wml) & 0x3f)
272#define MX51_ECSPI_DMA_RX_WML(wml) (((wml) & 0x3f) << 16)
273#define MX51_ECSPI_DMA_RXT_WML(wml) (((wml) & 0x3f) << 24)
274
275#define MX51_ECSPI_DMA_TEDEN (1 << 7)
276#define MX51_ECSPI_DMA_RXDEN (1 << 23)
277#define MX51_ECSPI_DMA_RXTDEN (1 << 31)
278
279#define MX51_ECSPI_STAT 0x18
280#define MX51_ECSPI_STAT_RR (1 << 3)
281
282#define MX51_ECSPI_TESTREG 0x20
283#define MX51_ECSPI_TESTREG_LBC BIT(31)
284
285static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
286{
287 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);
288#ifdef __LITTLE_ENDIAN
289 unsigned int bytes_per_word;
290#endif
291
292 if (spi_imx->rx_buf) {
293#ifdef __LITTLE_ENDIAN
294 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
295 if (bytes_per_word == 1)
296 val = cpu_to_be32(val);
297 else if (bytes_per_word == 2)
298 val = (val << 16) | (val >> 16);
299#endif
300 *(u32 *)spi_imx->rx_buf = val;
301 spi_imx->rx_buf += sizeof(u32);
302 }
303
304 spi_imx->remainder -= sizeof(u32);
305}
306
307static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
308{
309 int unaligned;
310 u32 val;
311
312 unaligned = spi_imx->remainder % 4;
313
314 if (!unaligned) {
315 spi_imx_buf_rx_swap_u32(spi_imx);
316 return;
317 }
318
319 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
320 spi_imx_buf_rx_u16(spi_imx);
321 return;
322 }
323
324 val = readl(spi_imx->base + MXC_CSPIRXDATA);
325
326 while (unaligned--) {
327 if (spi_imx->rx_buf) {
328 *(u8 *)spi_imx->rx_buf = (val >> (8 * unaligned)) & 0xff;
329 spi_imx->rx_buf++;
330 }
331 spi_imx->remainder--;
332 }
333}
334
335static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
336{
337 u32 val = 0;
338#ifdef __LITTLE_ENDIAN
339 unsigned int bytes_per_word;
340#endif
341
342 if (spi_imx->tx_buf) {
343 val = *(u32 *)spi_imx->tx_buf;
344 spi_imx->tx_buf += sizeof(u32);
345 }
346
347 spi_imx->count -= sizeof(u32);
348#ifdef __LITTLE_ENDIAN
349 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
350
351 if (bytes_per_word == 1)
352 val = cpu_to_be32(val);
353 else if (bytes_per_word == 2)
354 val = (val << 16) | (val >> 16);
355#endif
356 writel(val, spi_imx->base + MXC_CSPITXDATA);
357}
358
359static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
360{
361 int unaligned;
362 u32 val = 0;
363
364 unaligned = spi_imx->count % 4;
365
366 if (!unaligned) {
367 spi_imx_buf_tx_swap_u32(spi_imx);
368 return;
369 }
370
371 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
372 spi_imx_buf_tx_u16(spi_imx);
373 return;
374 }
375
376 while (unaligned--) {
377 if (spi_imx->tx_buf) {
378 val |= *(u8 *)spi_imx->tx_buf << (8 * unaligned);
379 spi_imx->tx_buf++;
380 }
381 spi_imx->count--;
382 }
383
384 writel(val, spi_imx->base + MXC_CSPITXDATA);
385}
386
387static void mx53_ecspi_rx_slave(struct spi_imx_data *spi_imx)
388{
389 u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA));
390
391 if (spi_imx->rx_buf) {
392 int n_bytes = spi_imx->slave_burst % sizeof(val);
393
394 if (!n_bytes)
395 n_bytes = sizeof(val);
396
397 memcpy(spi_imx->rx_buf,
398 ((u8 *)&val) + sizeof(val) - n_bytes, n_bytes);
399
400 spi_imx->rx_buf += n_bytes;
401 spi_imx->slave_burst -= n_bytes;
402 }
403
404 spi_imx->remainder -= sizeof(u32);
405}
406
407static void mx53_ecspi_tx_slave(struct spi_imx_data *spi_imx)
408{
409 u32 val = 0;
410 int n_bytes = spi_imx->count % sizeof(val);
411
412 if (!n_bytes)
413 n_bytes = sizeof(val);
414
415 if (spi_imx->tx_buf) {
416 memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
417 spi_imx->tx_buf, n_bytes);
418 val = cpu_to_be32(val);
419 spi_imx->tx_buf += n_bytes;
420 }
421
422 spi_imx->count -= n_bytes;
423
424 writel(val, spi_imx->base + MXC_CSPITXDATA);
425}
426
427/* MX51 eCSPI */
428static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
429 unsigned int fspi, unsigned int *fres)
430{
431 /*
432 * there are two 4-bit dividers, the pre-divider divides by
433 * $pre, the post-divider by 2^$post
434 */
435 unsigned int pre, post;
436 unsigned int fin = spi_imx->spi_clk;
437
438 if (unlikely(fspi > fin))
439 return 0;
440
441 post = fls(fin) - fls(fspi);
442 if (fin > fspi << post)
443 post++;
444
445 /* now we have: (fin <= fspi << post) with post being minimal */
446
447 post = max(4U, post) - 4;
448 if (unlikely(post > 0xf)) {
449 dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
450 fspi, fin);
451 return 0xff;
452 }
453
454 pre = DIV_ROUND_UP(fin, fspi << post) - 1;
455
456 dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
457 __func__, fin, fspi, post, pre);
458
459 /* Resulting frequency for the SCLK line. */
460 *fres = (fin / (pre + 1)) >> post;
461
462 return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
463 (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
464}
465
466static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
467{
468 unsigned val = 0;
469
470 if (enable & MXC_INT_TE)
471 val |= MX51_ECSPI_INT_TEEN;
472
473 if (enable & MXC_INT_RR)
474 val |= MX51_ECSPI_INT_RREN;
475
476 if (enable & MXC_INT_RDR)
477 val |= MX51_ECSPI_INT_RDREN;
478
479 writel(val, spi_imx->base + MX51_ECSPI_INT);
480}
481
482static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
483{
484 u32 reg;
485
486 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
487 reg |= MX51_ECSPI_CTRL_XCH;
488 writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
489}
490
491static void mx51_disable_dma(struct spi_imx_data *spi_imx)
492{
493 writel(0, spi_imx->base + MX51_ECSPI_DMA);
494}
495
496static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
497{
498 u32 ctrl;
499
500 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
501 ctrl &= ~MX51_ECSPI_CTRL_ENABLE;
502 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
503}
504
505static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
506 struct spi_message *msg)
507{
508 struct spi_device *spi = msg->spi;
509 u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
510 u32 testreg;
511 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
512
513 /* set Master or Slave mode */
514 if (spi_imx->slave_mode)
515 ctrl &= ~MX51_ECSPI_CTRL_MODE_MASK;
516 else
517 ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
518
519 /*
520 * Enable SPI_RDY handling (falling edge/level triggered).
521 */
522 if (spi->mode & SPI_READY)
523 ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
524
525 /* set chip select to use */
526 ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
527
528 /*
529 * The ctrl register must be written first, with the EN bit set other
530 * registers must not be written to.
531 */
532 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
533
534 testreg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
535 if (spi->mode & SPI_LOOP)
536 testreg |= MX51_ECSPI_TESTREG_LBC;
537 else
538 testreg &= ~MX51_ECSPI_TESTREG_LBC;
539 writel(testreg, spi_imx->base + MX51_ECSPI_TESTREG);
540
541 /*
542 * eCSPI burst completion by Chip Select signal in Slave mode
543 * is not functional for imx53 Soc, config SPI burst completed when
544 * BURST_LENGTH + 1 bits are received
545 */
546 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
547 cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
548 else
549 cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
550
551 if (spi->mode & SPI_CPHA)
552 cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
553 else
554 cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
555
556 if (spi->mode & SPI_CPOL) {
557 cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
558 cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
559 } else {
560 cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
561 cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
562 }
563
564 if (spi->mode & SPI_CS_HIGH)
565 cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
566 else
567 cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
568
569 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
570
571 return 0;
572}
573
574static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
575 struct spi_device *spi,
576 struct spi_transfer *t)
577{
578 u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
579 u32 clk = t->speed_hz, delay;
580
581 /* Clear BL field and set the right value */
582 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
583 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
584 ctrl |= (spi_imx->slave_burst * 8 - 1)
585 << MX51_ECSPI_CTRL_BL_OFFSET;
586 else
587 ctrl |= (spi_imx->bits_per_word - 1)
588 << MX51_ECSPI_CTRL_BL_OFFSET;
589
590 /* set clock speed */
591 ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
592 0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
593 ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
594 spi_imx->spi_bus_clk = clk;
595
596 if (spi_imx->usedma)
597 ctrl |= MX51_ECSPI_CTRL_SMC;
598
599 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
600
601 /*
602 * Wait until the changes in the configuration register CONFIGREG
603 * propagate into the hardware. It takes exactly one tick of the
604 * SCLK clock, but we will wait two SCLK clock just to be sure. The
605 * effect of the delay it takes for the hardware to apply changes
606 * is noticable if the SCLK clock run very slow. In such a case, if
607 * the polarity of SCLK should be inverted, the GPIO ChipSelect might
608 * be asserted before the SCLK polarity changes, which would disrupt
609 * the SPI communication as the device on the other end would consider
610 * the change of SCLK polarity as a clock tick already.
611 */
612 delay = (2 * 1000000) / clk;
613 if (likely(delay < 10)) /* SCLK is faster than 100 kHz */
614 udelay(delay);
615 else /* SCLK is _very_ slow */
616 usleep_range(delay, delay + 10);
617
618 return 0;
619}
620
621static void mx51_setup_wml(struct spi_imx_data *spi_imx)
622{
623 /*
624 * Configure the DMA register: setup the watermark
625 * and enable DMA request.
626 */
627 writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
628 MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
629 MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
630 MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
631 MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
632}
633
634static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
635{
636 return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
637}
638
639static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
640{
641 /* drain receive buffer */
642 while (mx51_ecspi_rx_available(spi_imx))
643 readl(spi_imx->base + MXC_CSPIRXDATA);
644}
645
646#define MX31_INTREG_TEEN (1 << 0)
647#define MX31_INTREG_RREN (1 << 3)
648
649#define MX31_CSPICTRL_ENABLE (1 << 0)
650#define MX31_CSPICTRL_MASTER (1 << 1)
651#define MX31_CSPICTRL_XCH (1 << 2)
652#define MX31_CSPICTRL_SMC (1 << 3)
653#define MX31_CSPICTRL_POL (1 << 4)
654#define MX31_CSPICTRL_PHA (1 << 5)
655#define MX31_CSPICTRL_SSCTL (1 << 6)
656#define MX31_CSPICTRL_SSPOL (1 << 7)
657#define MX31_CSPICTRL_BC_SHIFT 8
658#define MX35_CSPICTRL_BL_SHIFT 20
659#define MX31_CSPICTRL_CS_SHIFT 24
660#define MX35_CSPICTRL_CS_SHIFT 12
661#define MX31_CSPICTRL_DR_SHIFT 16
662
663#define MX31_CSPI_DMAREG 0x10
664#define MX31_DMAREG_RH_DEN (1<<4)
665#define MX31_DMAREG_TH_DEN (1<<1)
666
667#define MX31_CSPISTATUS 0x14
668#define MX31_STATUS_RR (1 << 3)
669
670#define MX31_CSPI_TESTREG 0x1C
671#define MX31_TEST_LBC (1 << 14)
672
673/* These functions also work for the i.MX35, but be aware that
674 * the i.MX35 has a slightly different register layout for bits
675 * we do not use here.
676 */
677static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
678{
679 unsigned int val = 0;
680
681 if (enable & MXC_INT_TE)
682 val |= MX31_INTREG_TEEN;
683 if (enable & MXC_INT_RR)
684 val |= MX31_INTREG_RREN;
685
686 writel(val, spi_imx->base + MXC_CSPIINT);
687}
688
689static void mx31_trigger(struct spi_imx_data *spi_imx)
690{
691 unsigned int reg;
692
693 reg = readl(spi_imx->base + MXC_CSPICTRL);
694 reg |= MX31_CSPICTRL_XCH;
695 writel(reg, spi_imx->base + MXC_CSPICTRL);
696}
697
698static int mx31_prepare_message(struct spi_imx_data *spi_imx,
699 struct spi_message *msg)
700{
701 return 0;
702}
703
704static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
705 struct spi_device *spi,
706 struct spi_transfer *t)
707{
708 unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
709 unsigned int clk;
710
711 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) <<
712 MX31_CSPICTRL_DR_SHIFT;
713 spi_imx->spi_bus_clk = clk;
714
715 if (is_imx35_cspi(spi_imx)) {
716 reg |= (spi_imx->bits_per_word - 1) << MX35_CSPICTRL_BL_SHIFT;
717 reg |= MX31_CSPICTRL_SSCTL;
718 } else {
719 reg |= (spi_imx->bits_per_word - 1) << MX31_CSPICTRL_BC_SHIFT;
720 }
721
722 if (spi->mode & SPI_CPHA)
723 reg |= MX31_CSPICTRL_PHA;
724 if (spi->mode & SPI_CPOL)
725 reg |= MX31_CSPICTRL_POL;
726 if (spi->mode & SPI_CS_HIGH)
727 reg |= MX31_CSPICTRL_SSPOL;
728 if (!spi->cs_gpiod)
729 reg |= (spi->chip_select) <<
730 (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
731 MX31_CSPICTRL_CS_SHIFT);
732
733 if (spi_imx->usedma)
734 reg |= MX31_CSPICTRL_SMC;
735
736 writel(reg, spi_imx->base + MXC_CSPICTRL);
737
738 reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
739 if (spi->mode & SPI_LOOP)
740 reg |= MX31_TEST_LBC;
741 else
742 reg &= ~MX31_TEST_LBC;
743 writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
744
745 if (spi_imx->usedma) {
746 /*
747 * configure DMA requests when RXFIFO is half full and
748 * when TXFIFO is half empty
749 */
750 writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
751 spi_imx->base + MX31_CSPI_DMAREG);
752 }
753
754 return 0;
755}
756
757static int mx31_rx_available(struct spi_imx_data *spi_imx)
758{
759 return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
760}
761
762static void mx31_reset(struct spi_imx_data *spi_imx)
763{
764 /* drain receive buffer */
765 while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
766 readl(spi_imx->base + MXC_CSPIRXDATA);
767}
768
769#define MX21_INTREG_RR (1 << 4)
770#define MX21_INTREG_TEEN (1 << 9)
771#define MX21_INTREG_RREN (1 << 13)
772
773#define MX21_CSPICTRL_POL (1 << 5)
774#define MX21_CSPICTRL_PHA (1 << 6)
775#define MX21_CSPICTRL_SSPOL (1 << 8)
776#define MX21_CSPICTRL_XCH (1 << 9)
777#define MX21_CSPICTRL_ENABLE (1 << 10)
778#define MX21_CSPICTRL_MASTER (1 << 11)
779#define MX21_CSPICTRL_DR_SHIFT 14
780#define MX21_CSPICTRL_CS_SHIFT 19
781
782static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
783{
784 unsigned int val = 0;
785
786 if (enable & MXC_INT_TE)
787 val |= MX21_INTREG_TEEN;
788 if (enable & MXC_INT_RR)
789 val |= MX21_INTREG_RREN;
790
791 writel(val, spi_imx->base + MXC_CSPIINT);
792}
793
794static void mx21_trigger(struct spi_imx_data *spi_imx)
795{
796 unsigned int reg;
797
798 reg = readl(spi_imx->base + MXC_CSPICTRL);
799 reg |= MX21_CSPICTRL_XCH;
800 writel(reg, spi_imx->base + MXC_CSPICTRL);
801}
802
803static int mx21_prepare_message(struct spi_imx_data *spi_imx,
804 struct spi_message *msg)
805{
806 return 0;
807}
808
809static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
810 struct spi_device *spi,
811 struct spi_transfer *t)
812{
813 unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
814 unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
815 unsigned int clk;
816
817 reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, t->speed_hz, max, &clk)
818 << MX21_CSPICTRL_DR_SHIFT;
819 spi_imx->spi_bus_clk = clk;
820
821 reg |= spi_imx->bits_per_word - 1;
822
823 if (spi->mode & SPI_CPHA)
824 reg |= MX21_CSPICTRL_PHA;
825 if (spi->mode & SPI_CPOL)
826 reg |= MX21_CSPICTRL_POL;
827 if (spi->mode & SPI_CS_HIGH)
828 reg |= MX21_CSPICTRL_SSPOL;
829 if (!spi->cs_gpiod)
830 reg |= spi->chip_select << MX21_CSPICTRL_CS_SHIFT;
831
832 writel(reg, spi_imx->base + MXC_CSPICTRL);
833
834 return 0;
835}
836
837static int mx21_rx_available(struct spi_imx_data *spi_imx)
838{
839 return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
840}
841
842static void mx21_reset(struct spi_imx_data *spi_imx)
843{
844 writel(1, spi_imx->base + MXC_RESET);
845}
846
847#define MX1_INTREG_RR (1 << 3)
848#define MX1_INTREG_TEEN (1 << 8)
849#define MX1_INTREG_RREN (1 << 11)
850
851#define MX1_CSPICTRL_POL (1 << 4)
852#define MX1_CSPICTRL_PHA (1 << 5)
853#define MX1_CSPICTRL_XCH (1 << 8)
854#define MX1_CSPICTRL_ENABLE (1 << 9)
855#define MX1_CSPICTRL_MASTER (1 << 10)
856#define MX1_CSPICTRL_DR_SHIFT 13
857
858static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
859{
860 unsigned int val = 0;
861
862 if (enable & MXC_INT_TE)
863 val |= MX1_INTREG_TEEN;
864 if (enable & MXC_INT_RR)
865 val |= MX1_INTREG_RREN;
866
867 writel(val, spi_imx->base + MXC_CSPIINT);
868}
869
870static void mx1_trigger(struct spi_imx_data *spi_imx)
871{
872 unsigned int reg;
873
874 reg = readl(spi_imx->base + MXC_CSPICTRL);
875 reg |= MX1_CSPICTRL_XCH;
876 writel(reg, spi_imx->base + MXC_CSPICTRL);
877}
878
879static int mx1_prepare_message(struct spi_imx_data *spi_imx,
880 struct spi_message *msg)
881{
882 return 0;
883}
884
885static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
886 struct spi_device *spi,
887 struct spi_transfer *t)
888{
889 unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
890 unsigned int clk;
891
892 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) <<
893 MX1_CSPICTRL_DR_SHIFT;
894 spi_imx->spi_bus_clk = clk;
895
896 reg |= spi_imx->bits_per_word - 1;
897
898 if (spi->mode & SPI_CPHA)
899 reg |= MX1_CSPICTRL_PHA;
900 if (spi->mode & SPI_CPOL)
901 reg |= MX1_CSPICTRL_POL;
902
903 writel(reg, spi_imx->base + MXC_CSPICTRL);
904
905 return 0;
906}
907
908static int mx1_rx_available(struct spi_imx_data *spi_imx)
909{
910 return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
911}
912
913static void mx1_reset(struct spi_imx_data *spi_imx)
914{
915 writel(1, spi_imx->base + MXC_RESET);
916}
917
918static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
919 .intctrl = mx1_intctrl,
920 .prepare_message = mx1_prepare_message,
921 .prepare_transfer = mx1_prepare_transfer,
922 .trigger = mx1_trigger,
923 .rx_available = mx1_rx_available,
924 .reset = mx1_reset,
925 .fifo_size = 8,
926 .has_dmamode = false,
927 .dynamic_burst = false,
928 .has_slavemode = false,
929 .devtype = IMX1_CSPI,
930};
931
932static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
933 .intctrl = mx21_intctrl,
934 .prepare_message = mx21_prepare_message,
935 .prepare_transfer = mx21_prepare_transfer,
936 .trigger = mx21_trigger,
937 .rx_available = mx21_rx_available,
938 .reset = mx21_reset,
939 .fifo_size = 8,
940 .has_dmamode = false,
941 .dynamic_burst = false,
942 .has_slavemode = false,
943 .devtype = IMX21_CSPI,
944};
945
946static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
947 /* i.mx27 cspi shares the functions with i.mx21 one */
948 .intctrl = mx21_intctrl,
949 .prepare_message = mx21_prepare_message,
950 .prepare_transfer = mx21_prepare_transfer,
951 .trigger = mx21_trigger,
952 .rx_available = mx21_rx_available,
953 .reset = mx21_reset,
954 .fifo_size = 8,
955 .has_dmamode = false,
956 .dynamic_burst = false,
957 .has_slavemode = false,
958 .devtype = IMX27_CSPI,
959};
960
961static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
962 .intctrl = mx31_intctrl,
963 .prepare_message = mx31_prepare_message,
964 .prepare_transfer = mx31_prepare_transfer,
965 .trigger = mx31_trigger,
966 .rx_available = mx31_rx_available,
967 .reset = mx31_reset,
968 .fifo_size = 8,
969 .has_dmamode = false,
970 .dynamic_burst = false,
971 .has_slavemode = false,
972 .devtype = IMX31_CSPI,
973};
974
975static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
976 /* i.mx35 and later cspi shares the functions with i.mx31 one */
977 .intctrl = mx31_intctrl,
978 .prepare_message = mx31_prepare_message,
979 .prepare_transfer = mx31_prepare_transfer,
980 .trigger = mx31_trigger,
981 .rx_available = mx31_rx_available,
982 .reset = mx31_reset,
983 .fifo_size = 8,
984 .has_dmamode = true,
985 .dynamic_burst = false,
986 .has_slavemode = false,
987 .devtype = IMX35_CSPI,
988};
989
990static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
991 .intctrl = mx51_ecspi_intctrl,
992 .prepare_message = mx51_ecspi_prepare_message,
993 .prepare_transfer = mx51_ecspi_prepare_transfer,
994 .trigger = mx51_ecspi_trigger,
995 .rx_available = mx51_ecspi_rx_available,
996 .reset = mx51_ecspi_reset,
997 .setup_wml = mx51_setup_wml,
998 .disable_dma = mx51_disable_dma,
999 .fifo_size = 64,
1000 .has_dmamode = true,
1001 .dynamic_burst = true,
1002 .has_slavemode = true,
1003 .disable = mx51_ecspi_disable,
1004 .devtype = IMX51_ECSPI,
1005};
1006
1007static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
1008 .intctrl = mx51_ecspi_intctrl,
1009 .prepare_message = mx51_ecspi_prepare_message,
1010 .prepare_transfer = mx51_ecspi_prepare_transfer,
1011 .trigger = mx51_ecspi_trigger,
1012 .rx_available = mx51_ecspi_rx_available,
1013 .disable_dma = mx51_disable_dma,
1014 .reset = mx51_ecspi_reset,
1015 .fifo_size = 64,
1016 .has_dmamode = true,
1017 .has_slavemode = true,
1018 .disable = mx51_ecspi_disable,
1019 .devtype = IMX53_ECSPI,
1020};
1021
1022static const struct platform_device_id spi_imx_devtype[] = {
1023 {
1024 .name = "imx1-cspi",
1025 .driver_data = (kernel_ulong_t) &imx1_cspi_devtype_data,
1026 }, {
1027 .name = "imx21-cspi",
1028 .driver_data = (kernel_ulong_t) &imx21_cspi_devtype_data,
1029 }, {
1030 .name = "imx27-cspi",
1031 .driver_data = (kernel_ulong_t) &imx27_cspi_devtype_data,
1032 }, {
1033 .name = "imx31-cspi",
1034 .driver_data = (kernel_ulong_t) &imx31_cspi_devtype_data,
1035 }, {
1036 .name = "imx35-cspi",
1037 .driver_data = (kernel_ulong_t) &imx35_cspi_devtype_data,
1038 }, {
1039 .name = "imx51-ecspi",
1040 .driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data,
1041 }, {
1042 .name = "imx53-ecspi",
1043 .driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
1044 }, {
1045 /* sentinel */
1046 }
1047};
1048
1049static const struct of_device_id spi_imx_dt_ids[] = {
1050 { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
1051 { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
1052 { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
1053 { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
1054 { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
1055 { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
1056 { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
1057 { /* sentinel */ }
1058};
1059MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
1060
1061static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
1062{
1063 u32 ctrl;
1064
1065 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
1066 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
1067 ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
1068 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
1069}
1070
1071static void spi_imx_push(struct spi_imx_data *spi_imx)
1072{
1073 unsigned int burst_len, fifo_words;
1074
1075 if (spi_imx->dynamic_burst)
1076 fifo_words = 4;
1077 else
1078 fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word);
1079 /*
1080 * Reload the FIFO when the remaining bytes to be transferred in the
1081 * current burst is 0. This only applies when bits_per_word is a
1082 * multiple of 8.
1083 */
1084 if (!spi_imx->remainder) {
1085 if (spi_imx->dynamic_burst) {
1086
1087 /* We need to deal unaligned data first */
1088 burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
1089
1090 if (!burst_len)
1091 burst_len = MX51_ECSPI_CTRL_MAX_BURST;
1092
1093 spi_imx_set_burst_len(spi_imx, burst_len * 8);
1094
1095 spi_imx->remainder = burst_len;
1096 } else {
1097 spi_imx->remainder = fifo_words;
1098 }
1099 }
1100
1101 while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
1102 if (!spi_imx->count)
1103 break;
1104 if (spi_imx->dynamic_burst &&
1105 spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
1106 fifo_words))
1107 break;
1108 spi_imx->tx(spi_imx);
1109 spi_imx->txfifo++;
1110 }
1111
1112 if (!spi_imx->slave_mode)
1113 spi_imx->devtype_data->trigger(spi_imx);
1114}
1115
1116static irqreturn_t spi_imx_isr(int irq, void *dev_id)
1117{
1118 struct spi_imx_data *spi_imx = dev_id;
1119
1120 while (spi_imx->txfifo &&
1121 spi_imx->devtype_data->rx_available(spi_imx)) {
1122 spi_imx->rx(spi_imx);
1123 spi_imx->txfifo--;
1124 }
1125
1126 if (spi_imx->count) {
1127 spi_imx_push(spi_imx);
1128 return IRQ_HANDLED;
1129 }
1130
1131 if (spi_imx->txfifo) {
1132 /* No data left to push, but still waiting for rx data,
1133 * enable receive data available interrupt.
1134 */
1135 spi_imx->devtype_data->intctrl(
1136 spi_imx, MXC_INT_RR);
1137 return IRQ_HANDLED;
1138 }
1139
1140 spi_imx->devtype_data->intctrl(spi_imx, 0);
1141 complete(&spi_imx->xfer_done);
1142
1143 return IRQ_HANDLED;
1144}
1145
1146static int spi_imx_dma_configure(struct spi_master *master)
1147{
1148 int ret;
1149 enum dma_slave_buswidth buswidth;
1150 struct dma_slave_config rx = {}, tx = {};
1151 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1152
1153 switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
1154 case 4:
1155 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
1156 break;
1157 case 2:
1158 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
1159 break;
1160 case 1:
1161 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
1162 break;
1163 default:
1164 return -EINVAL;
1165 }
1166
1167 tx.direction = DMA_MEM_TO_DEV;
1168 tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
1169 tx.dst_addr_width = buswidth;
1170 tx.dst_maxburst = spi_imx->wml;
1171 ret = dmaengine_slave_config(master->dma_tx, &tx);
1172 if (ret) {
1173 dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
1174 return ret;
1175 }
1176
1177 rx.direction = DMA_DEV_TO_MEM;
1178 rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
1179 rx.src_addr_width = buswidth;
1180 rx.src_maxburst = spi_imx->wml;
1181 ret = dmaengine_slave_config(master->dma_rx, &rx);
1182 if (ret) {
1183 dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
1184 return ret;
1185 }
1186
1187 return 0;
1188}
1189
1190static int spi_imx_setupxfer(struct spi_device *spi,
1191 struct spi_transfer *t)
1192{
1193 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1194
1195 if (!t)
1196 return 0;
1197
1198 spi_imx->bits_per_word = t->bits_per_word;
1199
1200 /*
1201 * Initialize the functions for transfer. To transfer non byte-aligned
1202 * words, we have to use multiple word-size bursts, we can't use
1203 * dynamic_burst in that case.
1204 */
1205 if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
1206 (spi_imx->bits_per_word == 8 ||
1207 spi_imx->bits_per_word == 16 ||
1208 spi_imx->bits_per_word == 32)) {
1209
1210 spi_imx->rx = spi_imx_buf_rx_swap;
1211 spi_imx->tx = spi_imx_buf_tx_swap;
1212 spi_imx->dynamic_burst = 1;
1213
1214 } else {
1215 if (spi_imx->bits_per_word <= 8) {
1216 spi_imx->rx = spi_imx_buf_rx_u8;
1217 spi_imx->tx = spi_imx_buf_tx_u8;
1218 } else if (spi_imx->bits_per_word <= 16) {
1219 spi_imx->rx = spi_imx_buf_rx_u16;
1220 spi_imx->tx = spi_imx_buf_tx_u16;
1221 } else {
1222 spi_imx->rx = spi_imx_buf_rx_u32;
1223 spi_imx->tx = spi_imx_buf_tx_u32;
1224 }
1225 spi_imx->dynamic_burst = 0;
1226 }
1227
1228 if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
1229 spi_imx->usedma = true;
1230 else
1231 spi_imx->usedma = false;
1232
1233 if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) {
1234 spi_imx->rx = mx53_ecspi_rx_slave;
1235 spi_imx->tx = mx53_ecspi_tx_slave;
1236 spi_imx->slave_burst = t->len;
1237 }
1238
1239 spi_imx->devtype_data->prepare_transfer(spi_imx, spi, t);
1240
1241 return 0;
1242}
1243
1244static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
1245{
1246 struct spi_master *master = spi_imx->bitbang.master;
1247
1248 if (master->dma_rx) {
1249 dma_release_channel(master->dma_rx);
1250 master->dma_rx = NULL;
1251 }
1252
1253 if (master->dma_tx) {
1254 dma_release_channel(master->dma_tx);
1255 master->dma_tx = NULL;
1256 }
1257}
1258
1259static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
1260 struct spi_master *master)
1261{
1262 int ret;
1263
1264 /* use pio mode for i.mx6dl chip TKT238285 */
1265 if (of_machine_is_compatible("fsl,imx6dl"))
1266 return 0;
1267
1268 spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
1269
1270 /* Prepare for TX DMA: */
1271 master->dma_tx = dma_request_chan(dev, "tx");
1272 if (IS_ERR(master->dma_tx)) {
1273 ret = PTR_ERR(master->dma_tx);
1274 dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
1275 master->dma_tx = NULL;
1276 goto err;
1277 }
1278
1279 /* Prepare for RX : */
1280 master->dma_rx = dma_request_chan(dev, "rx");
1281 if (IS_ERR(master->dma_rx)) {
1282 ret = PTR_ERR(master->dma_rx);
1283 dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
1284 master->dma_rx = NULL;
1285 goto err;
1286 }
1287
1288 init_completion(&spi_imx->dma_rx_completion);
1289 init_completion(&spi_imx->dma_tx_completion);
1290 master->can_dma = spi_imx_can_dma;
1291 master->max_dma_len = MAX_SDMA_BD_BYTES;
1292 spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
1293 SPI_MASTER_MUST_TX;
1294
1295 return 0;
1296err:
1297 spi_imx_sdma_exit(spi_imx);
1298 return ret;
1299}
1300
1301static void spi_imx_dma_rx_callback(void *cookie)
1302{
1303 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1304
1305 complete(&spi_imx->dma_rx_completion);
1306}
1307
1308static void spi_imx_dma_tx_callback(void *cookie)
1309{
1310 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1311
1312 complete(&spi_imx->dma_tx_completion);
1313}
1314
1315static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1316{
1317 unsigned long timeout = 0;
1318
1319 /* Time with actual data transfer and CS change delay related to HW */
1320 timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1321
1322 /* Add extra second for scheduler related activities */
1323 timeout += 1;
1324
1325 /* Double calculated timeout */
1326 return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1327}
1328
1329static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1330 struct spi_transfer *transfer)
1331{
1332 struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1333 unsigned long transfer_timeout;
1334 unsigned long timeout;
1335 struct spi_master *master = spi_imx->bitbang.master;
1336 struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1337 struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
1338 unsigned int bytes_per_word, i;
1339 int ret;
1340
1341 /* Get the right burst length from the last sg to ensure no tail data */
1342 bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
1343 for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
1344 if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
1345 break;
1346 }
1347 /* Use 1 as wml in case no available burst length got */
1348 if (i == 0)
1349 i = 1;
1350
1351 spi_imx->wml = i;
1352
1353 ret = spi_imx_dma_configure(master);
1354 if (ret)
1355 goto dma_failure_no_start;
1356
1357 if (!spi_imx->devtype_data->setup_wml) {
1358 dev_err(spi_imx->dev, "No setup_wml()?\n");
1359 ret = -EINVAL;
1360 goto dma_failure_no_start;
1361 }
1362 spi_imx->devtype_data->setup_wml(spi_imx);
1363
1364 /*
1365 * The TX DMA setup starts the transfer, so make sure RX is configured
1366 * before TX.
1367 */
1368 desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
1369 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1370 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1371 if (!desc_rx) {
1372 ret = -EINVAL;
1373 goto dma_failure_no_start;
1374 }
1375
1376 desc_rx->callback = spi_imx_dma_rx_callback;
1377 desc_rx->callback_param = (void *)spi_imx;
1378 dmaengine_submit(desc_rx);
1379 reinit_completion(&spi_imx->dma_rx_completion);
1380 dma_async_issue_pending(master->dma_rx);
1381
1382 desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
1383 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1384 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1385 if (!desc_tx) {
1386 dmaengine_terminate_all(master->dma_tx);
1387 dmaengine_terminate_all(master->dma_rx);
1388 return -EINVAL;
1389 }
1390
1391 desc_tx->callback = spi_imx_dma_tx_callback;
1392 desc_tx->callback_param = (void *)spi_imx;
1393 dmaengine_submit(desc_tx);
1394 reinit_completion(&spi_imx->dma_tx_completion);
1395 dma_async_issue_pending(master->dma_tx);
1396
1397 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1398
1399 /* Wait SDMA to finish the data transfer.*/
1400 timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1401 transfer_timeout);
1402 if (!timeout) {
1403 dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1404 dmaengine_terminate_all(master->dma_tx);
1405 dmaengine_terminate_all(master->dma_rx);
1406 return -ETIMEDOUT;
1407 }
1408
1409 timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1410 transfer_timeout);
1411 if (!timeout) {
1412 dev_err(&master->dev, "I/O Error in DMA RX\n");
1413 spi_imx->devtype_data->reset(spi_imx);
1414 dmaengine_terminate_all(master->dma_rx);
1415 return -ETIMEDOUT;
1416 }
1417
1418 return transfer->len;
1419/* fallback to pio */
1420dma_failure_no_start:
1421 transfer->error |= SPI_TRANS_FAIL_NO_START;
1422 return ret;
1423}
1424
1425static int spi_imx_pio_transfer(struct spi_device *spi,
1426 struct spi_transfer *transfer)
1427{
1428 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1429 unsigned long transfer_timeout;
1430 unsigned long timeout;
1431
1432 spi_imx->tx_buf = transfer->tx_buf;
1433 spi_imx->rx_buf = transfer->rx_buf;
1434 spi_imx->count = transfer->len;
1435 spi_imx->txfifo = 0;
1436 spi_imx->remainder = 0;
1437
1438 reinit_completion(&spi_imx->xfer_done);
1439
1440 spi_imx_push(spi_imx);
1441
1442 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1443
1444 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1445
1446 timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1447 transfer_timeout);
1448 if (!timeout) {
1449 dev_err(&spi->dev, "I/O Error in PIO\n");
1450 spi_imx->devtype_data->reset(spi_imx);
1451 return -ETIMEDOUT;
1452 }
1453
1454 return transfer->len;
1455}
1456
1457static int spi_imx_pio_transfer_slave(struct spi_device *spi,
1458 struct spi_transfer *transfer)
1459{
1460 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1461 int ret = transfer->len;
1462
1463 if (is_imx53_ecspi(spi_imx) &&
1464 transfer->len > MX53_MAX_TRANSFER_BYTES) {
1465 dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
1466 MX53_MAX_TRANSFER_BYTES);
1467 return -EMSGSIZE;
1468 }
1469
1470 spi_imx->tx_buf = transfer->tx_buf;
1471 spi_imx->rx_buf = transfer->rx_buf;
1472 spi_imx->count = transfer->len;
1473 spi_imx->txfifo = 0;
1474 spi_imx->remainder = 0;
1475
1476 reinit_completion(&spi_imx->xfer_done);
1477 spi_imx->slave_aborted = false;
1478
1479 spi_imx_push(spi_imx);
1480
1481 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE | MXC_INT_RDR);
1482
1483 if (wait_for_completion_interruptible(&spi_imx->xfer_done) ||
1484 spi_imx->slave_aborted) {
1485 dev_dbg(&spi->dev, "interrupted\n");
1486 ret = -EINTR;
1487 }
1488
1489 /* ecspi has a HW issue when works in Slave mode,
1490 * after 64 words writtern to TXFIFO, even TXFIFO becomes empty,
1491 * ECSPI_TXDATA keeps shift out the last word data,
1492 * so we have to disable ECSPI when in slave mode after the
1493 * transfer completes
1494 */
1495 if (spi_imx->devtype_data->disable)
1496 spi_imx->devtype_data->disable(spi_imx);
1497
1498 return ret;
1499}
1500
1501static int spi_imx_transfer(struct spi_device *spi,
1502 struct spi_transfer *transfer)
1503{
1504 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1505
1506 /* flush rxfifo before transfer */
1507 while (spi_imx->devtype_data->rx_available(spi_imx))
1508 readl(spi_imx->base + MXC_CSPIRXDATA);
1509
1510 if (spi_imx->slave_mode)
1511 return spi_imx_pio_transfer_slave(spi, transfer);
1512
1513 if (spi_imx->usedma)
1514 return spi_imx_dma_transfer(spi_imx, transfer);
1515
1516 return spi_imx_pio_transfer(spi, transfer);
1517}
1518
1519static int spi_imx_setup(struct spi_device *spi)
1520{
1521 dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1522 spi->mode, spi->bits_per_word, spi->max_speed_hz);
1523
1524 return 0;
1525}
1526
1527static void spi_imx_cleanup(struct spi_device *spi)
1528{
1529}
1530
1531static int
1532spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg)
1533{
1534 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1535 int ret;
1536
1537 ret = pm_runtime_get_sync(spi_imx->dev);
1538 if (ret < 0) {
1539 dev_err(spi_imx->dev, "failed to enable clock\n");
1540 return ret;
1541 }
1542
1543 ret = spi_imx->devtype_data->prepare_message(spi_imx, msg);
1544 if (ret) {
1545 pm_runtime_mark_last_busy(spi_imx->dev);
1546 pm_runtime_put_autosuspend(spi_imx->dev);
1547 }
1548
1549 return ret;
1550}
1551
1552static int
1553spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg)
1554{
1555 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1556
1557 pm_runtime_mark_last_busy(spi_imx->dev);
1558 pm_runtime_put_autosuspend(spi_imx->dev);
1559 return 0;
1560}
1561
1562static int spi_imx_slave_abort(struct spi_master *master)
1563{
1564 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1565
1566 spi_imx->slave_aborted = true;
1567 complete(&spi_imx->xfer_done);
1568
1569 return 0;
1570}
1571
1572static int spi_imx_probe(struct platform_device *pdev)
1573{
1574 struct device_node *np = pdev->dev.of_node;
1575 const struct of_device_id *of_id =
1576 of_match_device(spi_imx_dt_ids, &pdev->dev);
1577 struct spi_master *master;
1578 struct spi_imx_data *spi_imx;
1579 struct resource *res;
1580 int ret, irq, spi_drctl;
1581 const struct spi_imx_devtype_data *devtype_data = of_id ? of_id->data :
1582 (struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
1583 bool slave_mode;
1584 u32 val;
1585
1586 slave_mode = devtype_data->has_slavemode &&
1587 of_property_read_bool(np, "spi-slave");
1588 if (slave_mode)
1589 master = spi_alloc_slave(&pdev->dev,
1590 sizeof(struct spi_imx_data));
1591 else
1592 master = spi_alloc_master(&pdev->dev,
1593 sizeof(struct spi_imx_data));
1594 if (!master)
1595 return -ENOMEM;
1596
1597 ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
1598 if ((ret < 0) || (spi_drctl >= 0x3)) {
1599 /* '11' is reserved */
1600 spi_drctl = 0;
1601 }
1602
1603 platform_set_drvdata(pdev, master);
1604
1605 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1606 master->bus_num = np ? -1 : pdev->id;
1607 master->use_gpio_descriptors = true;
1608
1609 spi_imx = spi_master_get_devdata(master);
1610 spi_imx->bitbang.master = master;
1611 spi_imx->dev = &pdev->dev;
1612 spi_imx->slave_mode = slave_mode;
1613
1614 spi_imx->devtype_data = devtype_data;
1615
1616 /*
1617 * Get number of chip selects from device properties. This can be
1618 * coming from device tree or boardfiles, if it is not defined,
1619 * a default value of 3 chip selects will be used, as all the legacy
1620 * board files have <= 3 chip selects.
1621 */
1622 if (!device_property_read_u32(&pdev->dev, "num-cs", &val))
1623 master->num_chipselect = val;
1624 else
1625 master->num_chipselect = 3;
1626
1627 spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
1628 spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
1629 spi_imx->bitbang.master->setup = spi_imx_setup;
1630 spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
1631 spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
1632 spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
1633 spi_imx->bitbang.master->slave_abort = spi_imx_slave_abort;
1634 spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
1635 | SPI_NO_CS;
1636 if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
1637 is_imx53_ecspi(spi_imx))
1638 spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
1639
1640 spi_imx->spi_drctl = spi_drctl;
1641
1642 init_completion(&spi_imx->xfer_done);
1643
1644 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1645 spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
1646 if (IS_ERR(spi_imx->base)) {
1647 ret = PTR_ERR(spi_imx->base);
1648 goto out_master_put;
1649 }
1650 spi_imx->base_phys = res->start;
1651
1652 irq = platform_get_irq(pdev, 0);
1653 if (irq < 0) {
1654 ret = irq;
1655 goto out_master_put;
1656 }
1657
1658 ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1659 dev_name(&pdev->dev), spi_imx);
1660 if (ret) {
1661 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1662 goto out_master_put;
1663 }
1664
1665 spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1666 if (IS_ERR(spi_imx->clk_ipg)) {
1667 ret = PTR_ERR(spi_imx->clk_ipg);
1668 goto out_master_put;
1669 }
1670
1671 spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1672 if (IS_ERR(spi_imx->clk_per)) {
1673 ret = PTR_ERR(spi_imx->clk_per);
1674 goto out_master_put;
1675 }
1676
1677 pm_runtime_enable(spi_imx->dev);
1678 pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
1679 pm_runtime_use_autosuspend(spi_imx->dev);
1680
1681 ret = pm_runtime_get_sync(spi_imx->dev);
1682 if (ret < 0) {
1683 dev_err(spi_imx->dev, "failed to enable clock\n");
1684 goto out_runtime_pm_put;
1685 }
1686
1687 spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1688 /*
1689 * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1690 * if validated on other chips.
1691 */
1692 if (spi_imx->devtype_data->has_dmamode) {
1693 ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
1694 if (ret == -EPROBE_DEFER)
1695 goto out_runtime_pm_put;
1696
1697 if (ret < 0)
1698 dev_err(&pdev->dev, "dma setup error %d, use pio\n",
1699 ret);
1700 }
1701
1702 spi_imx->devtype_data->reset(spi_imx);
1703
1704 spi_imx->devtype_data->intctrl(spi_imx, 0);
1705
1706 master->dev.of_node = pdev->dev.of_node;
1707 ret = spi_bitbang_start(&spi_imx->bitbang);
1708 if (ret) {
1709 dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
1710 goto out_runtime_pm_put;
1711 }
1712
1713 dev_info(&pdev->dev, "probed\n");
1714
1715 pm_runtime_mark_last_busy(spi_imx->dev);
1716 pm_runtime_put_autosuspend(spi_imx->dev);
1717
1718 return ret;
1719
1720out_runtime_pm_put:
1721 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1722 pm_runtime_put_sync(spi_imx->dev);
1723 pm_runtime_disable(spi_imx->dev);
1724out_master_put:
1725 spi_master_put(master);
1726
1727 return ret;
1728}
1729
1730static int spi_imx_remove(struct platform_device *pdev)
1731{
1732 struct spi_master *master = platform_get_drvdata(pdev);
1733 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1734 int ret;
1735
1736 spi_bitbang_stop(&spi_imx->bitbang);
1737
1738 ret = pm_runtime_get_sync(spi_imx->dev);
1739 if (ret < 0) {
1740 dev_err(spi_imx->dev, "failed to enable clock\n");
1741 return ret;
1742 }
1743
1744 writel(0, spi_imx->base + MXC_CSPICTRL);
1745
1746 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1747 pm_runtime_put_sync(spi_imx->dev);
1748 pm_runtime_disable(spi_imx->dev);
1749
1750 spi_imx_sdma_exit(spi_imx);
1751 spi_master_put(master);
1752
1753 return 0;
1754}
1755
1756static int __maybe_unused spi_imx_runtime_resume(struct device *dev)
1757{
1758 struct spi_master *master = dev_get_drvdata(dev);
1759 struct spi_imx_data *spi_imx;
1760 int ret;
1761
1762 spi_imx = spi_master_get_devdata(master);
1763
1764 ret = clk_prepare_enable(spi_imx->clk_per);
1765 if (ret)
1766 return ret;
1767
1768 ret = clk_prepare_enable(spi_imx->clk_ipg);
1769 if (ret) {
1770 clk_disable_unprepare(spi_imx->clk_per);
1771 return ret;
1772 }
1773
1774 return 0;
1775}
1776
1777static int __maybe_unused spi_imx_runtime_suspend(struct device *dev)
1778{
1779 struct spi_master *master = dev_get_drvdata(dev);
1780 struct spi_imx_data *spi_imx;
1781
1782 spi_imx = spi_master_get_devdata(master);
1783
1784 clk_disable_unprepare(spi_imx->clk_per);
1785 clk_disable_unprepare(spi_imx->clk_ipg);
1786
1787 return 0;
1788}
1789
1790static int __maybe_unused spi_imx_suspend(struct device *dev)
1791{
1792 pinctrl_pm_select_sleep_state(dev);
1793 return 0;
1794}
1795
1796static int __maybe_unused spi_imx_resume(struct device *dev)
1797{
1798 pinctrl_pm_select_default_state(dev);
1799 return 0;
1800}
1801
1802static const struct dev_pm_ops imx_spi_pm = {
1803 SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend,
1804 spi_imx_runtime_resume, NULL)
1805 SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume)
1806};
1807
1808static struct platform_driver spi_imx_driver = {
1809 .driver = {
1810 .name = DRIVER_NAME,
1811 .of_match_table = spi_imx_dt_ids,
1812 .pm = &imx_spi_pm,
1813 },
1814 .id_table = spi_imx_devtype,
1815 .probe = spi_imx_probe,
1816 .remove = spi_imx_remove,
1817};
1818module_platform_driver(spi_imx_driver);
1819
1820MODULE_DESCRIPTION("SPI Controller driver");
1821MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1822MODULE_LICENSE("GPL");
1823MODULE_ALIAS("platform:" DRIVER_NAME);