Loading...
1// SPDX-License-Identifier: GPL-2.0+
2// Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3// Copyright (C) 2008 Juergen Beisert
4
5#include <linux/clk.h>
6#include <linux/completion.h>
7#include <linux/delay.h>
8#include <linux/dmaengine.h>
9#include <linux/dma-mapping.h>
10#include <linux/err.h>
11#include <linux/interrupt.h>
12#include <linux/io.h>
13#include <linux/irq.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/pinctrl/consumer.h>
17#include <linux/platform_device.h>
18#include <linux/pm_runtime.h>
19#include <linux/slab.h>
20#include <linux/spi/spi.h>
21#include <linux/types.h>
22#include <linux/of.h>
23#include <linux/of_device.h>
24#include <linux/property.h>
25
26#include <linux/dma/imx-dma.h>
27
28#define DRIVER_NAME "spi_imx"
29
30static bool use_dma = true;
31module_param(use_dma, bool, 0644);
32MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
33
34/* define polling limits */
35static unsigned int polling_limit_us = 30;
36module_param(polling_limit_us, uint, 0664);
37MODULE_PARM_DESC(polling_limit_us,
38 "time in us to run a transfer in polling mode\n");
39
40#define MXC_RPM_TIMEOUT 2000 /* 2000ms */
41
42#define MXC_CSPIRXDATA 0x00
43#define MXC_CSPITXDATA 0x04
44#define MXC_CSPICTRL 0x08
45#define MXC_CSPIINT 0x0c
46#define MXC_RESET 0x1c
47
48/* generic defines to abstract from the different register layouts */
49#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
50#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
51#define MXC_INT_RDR BIT(4) /* Receive date threshold interrupt */
52
53/* The maximum bytes that a sdma BD can transfer. */
54#define MAX_SDMA_BD_BYTES (1 << 15)
55#define MX51_ECSPI_CTRL_MAX_BURST 512
56/* The maximum bytes that IMX53_ECSPI can transfer in slave mode.*/
57#define MX53_MAX_TRANSFER_BYTES 512
58
59enum spi_imx_devtype {
60 IMX1_CSPI,
61 IMX21_CSPI,
62 IMX27_CSPI,
63 IMX31_CSPI,
64 IMX35_CSPI, /* CSPI on all i.mx except above */
65 IMX51_ECSPI, /* ECSPI on i.mx51 */
66 IMX53_ECSPI, /* ECSPI on i.mx53 and later */
67};
68
69struct spi_imx_data;
70
71struct spi_imx_devtype_data {
72 void (*intctrl)(struct spi_imx_data *spi_imx, int enable);
73 int (*prepare_message)(struct spi_imx_data *spi_imx, struct spi_message *msg);
74 int (*prepare_transfer)(struct spi_imx_data *spi_imx, struct spi_device *spi);
75 void (*trigger)(struct spi_imx_data *spi_imx);
76 int (*rx_available)(struct spi_imx_data *spi_imx);
77 void (*reset)(struct spi_imx_data *spi_imx);
78 void (*setup_wml)(struct spi_imx_data *spi_imx);
79 void (*disable)(struct spi_imx_data *spi_imx);
80 bool has_dmamode;
81 bool has_slavemode;
82 unsigned int fifo_size;
83 bool dynamic_burst;
84 /*
85 * ERR009165 fixed or not:
86 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
87 */
88 bool tx_glitch_fixed;
89 enum spi_imx_devtype devtype;
90};
91
92struct spi_imx_data {
93 struct spi_controller *controller;
94 struct device *dev;
95
96 struct completion xfer_done;
97 void __iomem *base;
98 unsigned long base_phys;
99
100 struct clk *clk_per;
101 struct clk *clk_ipg;
102 unsigned long spi_clk;
103 unsigned int spi_bus_clk;
104
105 unsigned int bits_per_word;
106 unsigned int spi_drctl;
107
108 unsigned int count, remainder;
109 void (*tx)(struct spi_imx_data *spi_imx);
110 void (*rx)(struct spi_imx_data *spi_imx);
111 void *rx_buf;
112 const void *tx_buf;
113 unsigned int txfifo; /* number of words pushed in tx FIFO */
114 unsigned int dynamic_burst;
115 bool rx_only;
116
117 /* Slave mode */
118 bool slave_mode;
119 bool slave_aborted;
120 unsigned int slave_burst;
121
122 /* DMA */
123 bool usedma;
124 u32 wml;
125 struct completion dma_rx_completion;
126 struct completion dma_tx_completion;
127
128 const struct spi_imx_devtype_data *devtype_data;
129};
130
131static inline int is_imx27_cspi(struct spi_imx_data *d)
132{
133 return d->devtype_data->devtype == IMX27_CSPI;
134}
135
136static inline int is_imx35_cspi(struct spi_imx_data *d)
137{
138 return d->devtype_data->devtype == IMX35_CSPI;
139}
140
141static inline int is_imx51_ecspi(struct spi_imx_data *d)
142{
143 return d->devtype_data->devtype == IMX51_ECSPI;
144}
145
146static inline int is_imx53_ecspi(struct spi_imx_data *d)
147{
148 return d->devtype_data->devtype == IMX53_ECSPI;
149}
150
151#define MXC_SPI_BUF_RX(type) \
152static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
153{ \
154 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
155 \
156 if (spi_imx->rx_buf) { \
157 *(type *)spi_imx->rx_buf = val; \
158 spi_imx->rx_buf += sizeof(type); \
159 } \
160 \
161 spi_imx->remainder -= sizeof(type); \
162}
163
164#define MXC_SPI_BUF_TX(type) \
165static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
166{ \
167 type val = 0; \
168 \
169 if (spi_imx->tx_buf) { \
170 val = *(type *)spi_imx->tx_buf; \
171 spi_imx->tx_buf += sizeof(type); \
172 } \
173 \
174 spi_imx->count -= sizeof(type); \
175 \
176 writel(val, spi_imx->base + MXC_CSPITXDATA); \
177}
178
179MXC_SPI_BUF_RX(u8)
180MXC_SPI_BUF_TX(u8)
181MXC_SPI_BUF_RX(u16)
182MXC_SPI_BUF_TX(u16)
183MXC_SPI_BUF_RX(u32)
184MXC_SPI_BUF_TX(u32)
185
186/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
187 * (which is currently not the case in this driver)
188 */
189static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
190 256, 384, 512, 768, 1024};
191
192/* MX21, MX27 */
193static unsigned int spi_imx_clkdiv_1(unsigned int fin,
194 unsigned int fspi, unsigned int max, unsigned int *fres)
195{
196 int i;
197
198 for (i = 2; i < max; i++)
199 if (fspi * mxc_clkdivs[i] >= fin)
200 break;
201
202 *fres = fin / mxc_clkdivs[i];
203 return i;
204}
205
206/* MX1, MX31, MX35, MX51 CSPI */
207static unsigned int spi_imx_clkdiv_2(unsigned int fin,
208 unsigned int fspi, unsigned int *fres)
209{
210 int i, div = 4;
211
212 for (i = 0; i < 7; i++) {
213 if (fspi * div >= fin)
214 goto out;
215 div <<= 1;
216 }
217
218out:
219 *fres = fin / div;
220 return i;
221}
222
223static int spi_imx_bytes_per_word(const int bits_per_word)
224{
225 if (bits_per_word <= 8)
226 return 1;
227 else if (bits_per_word <= 16)
228 return 2;
229 else
230 return 4;
231}
232
233static bool spi_imx_can_dma(struct spi_controller *controller, struct spi_device *spi,
234 struct spi_transfer *transfer)
235{
236 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
237
238 if (!use_dma || controller->fallback)
239 return false;
240
241 if (!controller->dma_rx)
242 return false;
243
244 if (spi_imx->slave_mode)
245 return false;
246
247 if (transfer->len < spi_imx->devtype_data->fifo_size)
248 return false;
249
250 spi_imx->dynamic_burst = 0;
251
252 return true;
253}
254
255#define MX51_ECSPI_CTRL 0x08
256#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
257#define MX51_ECSPI_CTRL_XCH (1 << 2)
258#define MX51_ECSPI_CTRL_SMC (1 << 3)
259#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
260#define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16)
261#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
262#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
263#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
264#define MX51_ECSPI_CTRL_BL_OFFSET 20
265#define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20)
266
267#define MX51_ECSPI_CONFIG 0x0c
268#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
269#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
270#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
271#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
272#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20))
273
274#define MX51_ECSPI_INT 0x10
275#define MX51_ECSPI_INT_TEEN (1 << 0)
276#define MX51_ECSPI_INT_RREN (1 << 3)
277#define MX51_ECSPI_INT_RDREN (1 << 4)
278
279#define MX51_ECSPI_DMA 0x14
280#define MX51_ECSPI_DMA_TX_WML(wml) ((wml) & 0x3f)
281#define MX51_ECSPI_DMA_RX_WML(wml) (((wml) & 0x3f) << 16)
282#define MX51_ECSPI_DMA_RXT_WML(wml) (((wml) & 0x3f) << 24)
283
284#define MX51_ECSPI_DMA_TEDEN (1 << 7)
285#define MX51_ECSPI_DMA_RXDEN (1 << 23)
286#define MX51_ECSPI_DMA_RXTDEN (1 << 31)
287
288#define MX51_ECSPI_STAT 0x18
289#define MX51_ECSPI_STAT_RR (1 << 3)
290
291#define MX51_ECSPI_TESTREG 0x20
292#define MX51_ECSPI_TESTREG_LBC BIT(31)
293
294static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
295{
296 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);
297
298 if (spi_imx->rx_buf) {
299#ifdef __LITTLE_ENDIAN
300 unsigned int bytes_per_word;
301
302 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
303 if (bytes_per_word == 1)
304 swab32s(&val);
305 else if (bytes_per_word == 2)
306 swahw32s(&val);
307#endif
308 *(u32 *)spi_imx->rx_buf = val;
309 spi_imx->rx_buf += sizeof(u32);
310 }
311
312 spi_imx->remainder -= sizeof(u32);
313}
314
315static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
316{
317 int unaligned;
318 u32 val;
319
320 unaligned = spi_imx->remainder % 4;
321
322 if (!unaligned) {
323 spi_imx_buf_rx_swap_u32(spi_imx);
324 return;
325 }
326
327 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
328 spi_imx_buf_rx_u16(spi_imx);
329 return;
330 }
331
332 val = readl(spi_imx->base + MXC_CSPIRXDATA);
333
334 while (unaligned--) {
335 if (spi_imx->rx_buf) {
336 *(u8 *)spi_imx->rx_buf = (val >> (8 * unaligned)) & 0xff;
337 spi_imx->rx_buf++;
338 }
339 spi_imx->remainder--;
340 }
341}
342
343static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
344{
345 u32 val = 0;
346#ifdef __LITTLE_ENDIAN
347 unsigned int bytes_per_word;
348#endif
349
350 if (spi_imx->tx_buf) {
351 val = *(u32 *)spi_imx->tx_buf;
352 spi_imx->tx_buf += sizeof(u32);
353 }
354
355 spi_imx->count -= sizeof(u32);
356#ifdef __LITTLE_ENDIAN
357 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
358
359 if (bytes_per_word == 1)
360 swab32s(&val);
361 else if (bytes_per_word == 2)
362 swahw32s(&val);
363#endif
364 writel(val, spi_imx->base + MXC_CSPITXDATA);
365}
366
367static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
368{
369 int unaligned;
370 u32 val = 0;
371
372 unaligned = spi_imx->count % 4;
373
374 if (!unaligned) {
375 spi_imx_buf_tx_swap_u32(spi_imx);
376 return;
377 }
378
379 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
380 spi_imx_buf_tx_u16(spi_imx);
381 return;
382 }
383
384 while (unaligned--) {
385 if (spi_imx->tx_buf) {
386 val |= *(u8 *)spi_imx->tx_buf << (8 * unaligned);
387 spi_imx->tx_buf++;
388 }
389 spi_imx->count--;
390 }
391
392 writel(val, spi_imx->base + MXC_CSPITXDATA);
393}
394
395static void mx53_ecspi_rx_slave(struct spi_imx_data *spi_imx)
396{
397 u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA));
398
399 if (spi_imx->rx_buf) {
400 int n_bytes = spi_imx->slave_burst % sizeof(val);
401
402 if (!n_bytes)
403 n_bytes = sizeof(val);
404
405 memcpy(spi_imx->rx_buf,
406 ((u8 *)&val) + sizeof(val) - n_bytes, n_bytes);
407
408 spi_imx->rx_buf += n_bytes;
409 spi_imx->slave_burst -= n_bytes;
410 }
411
412 spi_imx->remainder -= sizeof(u32);
413}
414
415static void mx53_ecspi_tx_slave(struct spi_imx_data *spi_imx)
416{
417 u32 val = 0;
418 int n_bytes = spi_imx->count % sizeof(val);
419
420 if (!n_bytes)
421 n_bytes = sizeof(val);
422
423 if (spi_imx->tx_buf) {
424 memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
425 spi_imx->tx_buf, n_bytes);
426 val = cpu_to_be32(val);
427 spi_imx->tx_buf += n_bytes;
428 }
429
430 spi_imx->count -= n_bytes;
431
432 writel(val, spi_imx->base + MXC_CSPITXDATA);
433}
434
435/* MX51 eCSPI */
436static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
437 unsigned int fspi, unsigned int *fres)
438{
439 /*
440 * there are two 4-bit dividers, the pre-divider divides by
441 * $pre, the post-divider by 2^$post
442 */
443 unsigned int pre, post;
444 unsigned int fin = spi_imx->spi_clk;
445
446 fspi = min(fspi, fin);
447
448 post = fls(fin) - fls(fspi);
449 if (fin > fspi << post)
450 post++;
451
452 /* now we have: (fin <= fspi << post) with post being minimal */
453
454 post = max(4U, post) - 4;
455 if (unlikely(post > 0xf)) {
456 dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
457 fspi, fin);
458 return 0xff;
459 }
460
461 pre = DIV_ROUND_UP(fin, fspi << post) - 1;
462
463 dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
464 __func__, fin, fspi, post, pre);
465
466 /* Resulting frequency for the SCLK line. */
467 *fres = (fin / (pre + 1)) >> post;
468
469 return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
470 (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
471}
472
473static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
474{
475 unsigned int val = 0;
476
477 if (enable & MXC_INT_TE)
478 val |= MX51_ECSPI_INT_TEEN;
479
480 if (enable & MXC_INT_RR)
481 val |= MX51_ECSPI_INT_RREN;
482
483 if (enable & MXC_INT_RDR)
484 val |= MX51_ECSPI_INT_RDREN;
485
486 writel(val, spi_imx->base + MX51_ECSPI_INT);
487}
488
489static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
490{
491 u32 reg;
492
493 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
494 reg |= MX51_ECSPI_CTRL_XCH;
495 writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
496}
497
498static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
499{
500 u32 ctrl;
501
502 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
503 ctrl &= ~MX51_ECSPI_CTRL_ENABLE;
504 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
505}
506
507static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
508 struct spi_message *msg)
509{
510 struct spi_device *spi = msg->spi;
511 struct spi_transfer *xfer;
512 u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
513 u32 min_speed_hz = ~0U;
514 u32 testreg, delay;
515 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
516 u32 current_cfg = cfg;
517
518 /* set Master or Slave mode */
519 if (spi_imx->slave_mode)
520 ctrl &= ~MX51_ECSPI_CTRL_MODE_MASK;
521 else
522 ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
523
524 /*
525 * Enable SPI_RDY handling (falling edge/level triggered).
526 */
527 if (spi->mode & SPI_READY)
528 ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
529
530 /* set chip select to use */
531 ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
532
533 /*
534 * The ctrl register must be written first, with the EN bit set other
535 * registers must not be written to.
536 */
537 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
538
539 testreg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
540 if (spi->mode & SPI_LOOP)
541 testreg |= MX51_ECSPI_TESTREG_LBC;
542 else
543 testreg &= ~MX51_ECSPI_TESTREG_LBC;
544 writel(testreg, spi_imx->base + MX51_ECSPI_TESTREG);
545
546 /*
547 * eCSPI burst completion by Chip Select signal in Slave mode
548 * is not functional for imx53 Soc, config SPI burst completed when
549 * BURST_LENGTH + 1 bits are received
550 */
551 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
552 cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
553 else
554 cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
555
556 if (spi->mode & SPI_CPOL) {
557 cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
558 cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
559 } else {
560 cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
561 cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
562 }
563
564 if (spi->mode & SPI_CS_HIGH)
565 cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
566 else
567 cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
568
569 if (cfg == current_cfg)
570 return 0;
571
572 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
573
574 /*
575 * Wait until the changes in the configuration register CONFIGREG
576 * propagate into the hardware. It takes exactly one tick of the
577 * SCLK clock, but we will wait two SCLK clock just to be sure. The
578 * effect of the delay it takes for the hardware to apply changes
579 * is noticable if the SCLK clock run very slow. In such a case, if
580 * the polarity of SCLK should be inverted, the GPIO ChipSelect might
581 * be asserted before the SCLK polarity changes, which would disrupt
582 * the SPI communication as the device on the other end would consider
583 * the change of SCLK polarity as a clock tick already.
584 *
585 * Because spi_imx->spi_bus_clk is only set in prepare_message
586 * callback, iterate over all the transfers in spi_message, find the
587 * one with lowest bus frequency, and use that bus frequency for the
588 * delay calculation. In case all transfers have speed_hz == 0, then
589 * min_speed_hz is ~0 and the resulting delay is zero.
590 */
591 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
592 if (!xfer->speed_hz)
593 continue;
594 min_speed_hz = min(xfer->speed_hz, min_speed_hz);
595 }
596
597 delay = (2 * 1000000) / min_speed_hz;
598 if (likely(delay < 10)) /* SCLK is faster than 200 kHz */
599 udelay(delay);
600 else /* SCLK is _very_ slow */
601 usleep_range(delay, delay + 10);
602
603 return 0;
604}
605
606static void mx51_configure_cpha(struct spi_imx_data *spi_imx,
607 struct spi_device *spi)
608{
609 bool cpha = (spi->mode & SPI_CPHA);
610 bool flip_cpha = (spi->mode & SPI_RX_CPHA_FLIP) && spi_imx->rx_only;
611 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
612
613 /* Flip cpha logical value iff flip_cpha */
614 cpha ^= flip_cpha;
615
616 if (cpha)
617 cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
618 else
619 cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
620
621 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
622}
623
624static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
625 struct spi_device *spi)
626{
627 u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
628 u32 clk;
629
630 /* Clear BL field and set the right value */
631 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
632 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
633 ctrl |= (spi_imx->slave_burst * 8 - 1)
634 << MX51_ECSPI_CTRL_BL_OFFSET;
635 else
636 ctrl |= (spi_imx->bits_per_word - 1)
637 << MX51_ECSPI_CTRL_BL_OFFSET;
638
639 /* set clock speed */
640 ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
641 0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
642 ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
643 spi_imx->spi_bus_clk = clk;
644
645 mx51_configure_cpha(spi_imx, spi);
646
647 /*
648 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
649 * before i.mx6ul.
650 */
651 if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
652 ctrl |= MX51_ECSPI_CTRL_SMC;
653 else
654 ctrl &= ~MX51_ECSPI_CTRL_SMC;
655
656 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
657
658 return 0;
659}
660
661static void mx51_setup_wml(struct spi_imx_data *spi_imx)
662{
663 u32 tx_wml = 0;
664
665 if (spi_imx->devtype_data->tx_glitch_fixed)
666 tx_wml = spi_imx->wml;
667 /*
668 * Configure the DMA register: setup the watermark
669 * and enable DMA request.
670 */
671 writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
672 MX51_ECSPI_DMA_TX_WML(tx_wml) |
673 MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
674 MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
675 MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
676}
677
678static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
679{
680 return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
681}
682
683static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
684{
685 /* drain receive buffer */
686 while (mx51_ecspi_rx_available(spi_imx))
687 readl(spi_imx->base + MXC_CSPIRXDATA);
688}
689
690#define MX31_INTREG_TEEN (1 << 0)
691#define MX31_INTREG_RREN (1 << 3)
692
693#define MX31_CSPICTRL_ENABLE (1 << 0)
694#define MX31_CSPICTRL_MASTER (1 << 1)
695#define MX31_CSPICTRL_XCH (1 << 2)
696#define MX31_CSPICTRL_SMC (1 << 3)
697#define MX31_CSPICTRL_POL (1 << 4)
698#define MX31_CSPICTRL_PHA (1 << 5)
699#define MX31_CSPICTRL_SSCTL (1 << 6)
700#define MX31_CSPICTRL_SSPOL (1 << 7)
701#define MX31_CSPICTRL_BC_SHIFT 8
702#define MX35_CSPICTRL_BL_SHIFT 20
703#define MX31_CSPICTRL_CS_SHIFT 24
704#define MX35_CSPICTRL_CS_SHIFT 12
705#define MX31_CSPICTRL_DR_SHIFT 16
706
707#define MX31_CSPI_DMAREG 0x10
708#define MX31_DMAREG_RH_DEN (1<<4)
709#define MX31_DMAREG_TH_DEN (1<<1)
710
711#define MX31_CSPISTATUS 0x14
712#define MX31_STATUS_RR (1 << 3)
713
714#define MX31_CSPI_TESTREG 0x1C
715#define MX31_TEST_LBC (1 << 14)
716
717/* These functions also work for the i.MX35, but be aware that
718 * the i.MX35 has a slightly different register layout for bits
719 * we do not use here.
720 */
721static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
722{
723 unsigned int val = 0;
724
725 if (enable & MXC_INT_TE)
726 val |= MX31_INTREG_TEEN;
727 if (enable & MXC_INT_RR)
728 val |= MX31_INTREG_RREN;
729
730 writel(val, spi_imx->base + MXC_CSPIINT);
731}
732
733static void mx31_trigger(struct spi_imx_data *spi_imx)
734{
735 unsigned int reg;
736
737 reg = readl(spi_imx->base + MXC_CSPICTRL);
738 reg |= MX31_CSPICTRL_XCH;
739 writel(reg, spi_imx->base + MXC_CSPICTRL);
740}
741
742static int mx31_prepare_message(struct spi_imx_data *spi_imx,
743 struct spi_message *msg)
744{
745 return 0;
746}
747
748static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
749 struct spi_device *spi)
750{
751 unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
752 unsigned int clk;
753
754 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
755 MX31_CSPICTRL_DR_SHIFT;
756 spi_imx->spi_bus_clk = clk;
757
758 if (is_imx35_cspi(spi_imx)) {
759 reg |= (spi_imx->bits_per_word - 1) << MX35_CSPICTRL_BL_SHIFT;
760 reg |= MX31_CSPICTRL_SSCTL;
761 } else {
762 reg |= (spi_imx->bits_per_word - 1) << MX31_CSPICTRL_BC_SHIFT;
763 }
764
765 if (spi->mode & SPI_CPHA)
766 reg |= MX31_CSPICTRL_PHA;
767 if (spi->mode & SPI_CPOL)
768 reg |= MX31_CSPICTRL_POL;
769 if (spi->mode & SPI_CS_HIGH)
770 reg |= MX31_CSPICTRL_SSPOL;
771 if (!spi->cs_gpiod)
772 reg |= (spi->chip_select) <<
773 (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
774 MX31_CSPICTRL_CS_SHIFT);
775
776 if (spi_imx->usedma)
777 reg |= MX31_CSPICTRL_SMC;
778
779 writel(reg, spi_imx->base + MXC_CSPICTRL);
780
781 reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
782 if (spi->mode & SPI_LOOP)
783 reg |= MX31_TEST_LBC;
784 else
785 reg &= ~MX31_TEST_LBC;
786 writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
787
788 if (spi_imx->usedma) {
789 /*
790 * configure DMA requests when RXFIFO is half full and
791 * when TXFIFO is half empty
792 */
793 writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
794 spi_imx->base + MX31_CSPI_DMAREG);
795 }
796
797 return 0;
798}
799
800static int mx31_rx_available(struct spi_imx_data *spi_imx)
801{
802 return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
803}
804
805static void mx31_reset(struct spi_imx_data *spi_imx)
806{
807 /* drain receive buffer */
808 while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
809 readl(spi_imx->base + MXC_CSPIRXDATA);
810}
811
812#define MX21_INTREG_RR (1 << 4)
813#define MX21_INTREG_TEEN (1 << 9)
814#define MX21_INTREG_RREN (1 << 13)
815
816#define MX21_CSPICTRL_POL (1 << 5)
817#define MX21_CSPICTRL_PHA (1 << 6)
818#define MX21_CSPICTRL_SSPOL (1 << 8)
819#define MX21_CSPICTRL_XCH (1 << 9)
820#define MX21_CSPICTRL_ENABLE (1 << 10)
821#define MX21_CSPICTRL_MASTER (1 << 11)
822#define MX21_CSPICTRL_DR_SHIFT 14
823#define MX21_CSPICTRL_CS_SHIFT 19
824
825static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
826{
827 unsigned int val = 0;
828
829 if (enable & MXC_INT_TE)
830 val |= MX21_INTREG_TEEN;
831 if (enable & MXC_INT_RR)
832 val |= MX21_INTREG_RREN;
833
834 writel(val, spi_imx->base + MXC_CSPIINT);
835}
836
837static void mx21_trigger(struct spi_imx_data *spi_imx)
838{
839 unsigned int reg;
840
841 reg = readl(spi_imx->base + MXC_CSPICTRL);
842 reg |= MX21_CSPICTRL_XCH;
843 writel(reg, spi_imx->base + MXC_CSPICTRL);
844}
845
846static int mx21_prepare_message(struct spi_imx_data *spi_imx,
847 struct spi_message *msg)
848{
849 return 0;
850}
851
852static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
853 struct spi_device *spi)
854{
855 unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
856 unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
857 unsigned int clk;
858
859 reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, spi_imx->spi_bus_clk, max, &clk)
860 << MX21_CSPICTRL_DR_SHIFT;
861 spi_imx->spi_bus_clk = clk;
862
863 reg |= spi_imx->bits_per_word - 1;
864
865 if (spi->mode & SPI_CPHA)
866 reg |= MX21_CSPICTRL_PHA;
867 if (spi->mode & SPI_CPOL)
868 reg |= MX21_CSPICTRL_POL;
869 if (spi->mode & SPI_CS_HIGH)
870 reg |= MX21_CSPICTRL_SSPOL;
871 if (!spi->cs_gpiod)
872 reg |= spi->chip_select << MX21_CSPICTRL_CS_SHIFT;
873
874 writel(reg, spi_imx->base + MXC_CSPICTRL);
875
876 return 0;
877}
878
879static int mx21_rx_available(struct spi_imx_data *spi_imx)
880{
881 return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
882}
883
884static void mx21_reset(struct spi_imx_data *spi_imx)
885{
886 writel(1, spi_imx->base + MXC_RESET);
887}
888
889#define MX1_INTREG_RR (1 << 3)
890#define MX1_INTREG_TEEN (1 << 8)
891#define MX1_INTREG_RREN (1 << 11)
892
893#define MX1_CSPICTRL_POL (1 << 4)
894#define MX1_CSPICTRL_PHA (1 << 5)
895#define MX1_CSPICTRL_XCH (1 << 8)
896#define MX1_CSPICTRL_ENABLE (1 << 9)
897#define MX1_CSPICTRL_MASTER (1 << 10)
898#define MX1_CSPICTRL_DR_SHIFT 13
899
900static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
901{
902 unsigned int val = 0;
903
904 if (enable & MXC_INT_TE)
905 val |= MX1_INTREG_TEEN;
906 if (enable & MXC_INT_RR)
907 val |= MX1_INTREG_RREN;
908
909 writel(val, spi_imx->base + MXC_CSPIINT);
910}
911
912static void mx1_trigger(struct spi_imx_data *spi_imx)
913{
914 unsigned int reg;
915
916 reg = readl(spi_imx->base + MXC_CSPICTRL);
917 reg |= MX1_CSPICTRL_XCH;
918 writel(reg, spi_imx->base + MXC_CSPICTRL);
919}
920
921static int mx1_prepare_message(struct spi_imx_data *spi_imx,
922 struct spi_message *msg)
923{
924 return 0;
925}
926
927static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
928 struct spi_device *spi)
929{
930 unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
931 unsigned int clk;
932
933 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
934 MX1_CSPICTRL_DR_SHIFT;
935 spi_imx->spi_bus_clk = clk;
936
937 reg |= spi_imx->bits_per_word - 1;
938
939 if (spi->mode & SPI_CPHA)
940 reg |= MX1_CSPICTRL_PHA;
941 if (spi->mode & SPI_CPOL)
942 reg |= MX1_CSPICTRL_POL;
943
944 writel(reg, spi_imx->base + MXC_CSPICTRL);
945
946 return 0;
947}
948
949static int mx1_rx_available(struct spi_imx_data *spi_imx)
950{
951 return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
952}
953
954static void mx1_reset(struct spi_imx_data *spi_imx)
955{
956 writel(1, spi_imx->base + MXC_RESET);
957}
958
959static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
960 .intctrl = mx1_intctrl,
961 .prepare_message = mx1_prepare_message,
962 .prepare_transfer = mx1_prepare_transfer,
963 .trigger = mx1_trigger,
964 .rx_available = mx1_rx_available,
965 .reset = mx1_reset,
966 .fifo_size = 8,
967 .has_dmamode = false,
968 .dynamic_burst = false,
969 .has_slavemode = false,
970 .devtype = IMX1_CSPI,
971};
972
973static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
974 .intctrl = mx21_intctrl,
975 .prepare_message = mx21_prepare_message,
976 .prepare_transfer = mx21_prepare_transfer,
977 .trigger = mx21_trigger,
978 .rx_available = mx21_rx_available,
979 .reset = mx21_reset,
980 .fifo_size = 8,
981 .has_dmamode = false,
982 .dynamic_burst = false,
983 .has_slavemode = false,
984 .devtype = IMX21_CSPI,
985};
986
987static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
988 /* i.mx27 cspi shares the functions with i.mx21 one */
989 .intctrl = mx21_intctrl,
990 .prepare_message = mx21_prepare_message,
991 .prepare_transfer = mx21_prepare_transfer,
992 .trigger = mx21_trigger,
993 .rx_available = mx21_rx_available,
994 .reset = mx21_reset,
995 .fifo_size = 8,
996 .has_dmamode = false,
997 .dynamic_burst = false,
998 .has_slavemode = false,
999 .devtype = IMX27_CSPI,
1000};
1001
1002static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
1003 .intctrl = mx31_intctrl,
1004 .prepare_message = mx31_prepare_message,
1005 .prepare_transfer = mx31_prepare_transfer,
1006 .trigger = mx31_trigger,
1007 .rx_available = mx31_rx_available,
1008 .reset = mx31_reset,
1009 .fifo_size = 8,
1010 .has_dmamode = false,
1011 .dynamic_burst = false,
1012 .has_slavemode = false,
1013 .devtype = IMX31_CSPI,
1014};
1015
1016static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
1017 /* i.mx35 and later cspi shares the functions with i.mx31 one */
1018 .intctrl = mx31_intctrl,
1019 .prepare_message = mx31_prepare_message,
1020 .prepare_transfer = mx31_prepare_transfer,
1021 .trigger = mx31_trigger,
1022 .rx_available = mx31_rx_available,
1023 .reset = mx31_reset,
1024 .fifo_size = 8,
1025 .has_dmamode = true,
1026 .dynamic_burst = false,
1027 .has_slavemode = false,
1028 .devtype = IMX35_CSPI,
1029};
1030
1031static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
1032 .intctrl = mx51_ecspi_intctrl,
1033 .prepare_message = mx51_ecspi_prepare_message,
1034 .prepare_transfer = mx51_ecspi_prepare_transfer,
1035 .trigger = mx51_ecspi_trigger,
1036 .rx_available = mx51_ecspi_rx_available,
1037 .reset = mx51_ecspi_reset,
1038 .setup_wml = mx51_setup_wml,
1039 .fifo_size = 64,
1040 .has_dmamode = true,
1041 .dynamic_burst = true,
1042 .has_slavemode = true,
1043 .disable = mx51_ecspi_disable,
1044 .devtype = IMX51_ECSPI,
1045};
1046
1047static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
1048 .intctrl = mx51_ecspi_intctrl,
1049 .prepare_message = mx51_ecspi_prepare_message,
1050 .prepare_transfer = mx51_ecspi_prepare_transfer,
1051 .trigger = mx51_ecspi_trigger,
1052 .rx_available = mx51_ecspi_rx_available,
1053 .reset = mx51_ecspi_reset,
1054 .fifo_size = 64,
1055 .has_dmamode = true,
1056 .has_slavemode = true,
1057 .disable = mx51_ecspi_disable,
1058 .devtype = IMX53_ECSPI,
1059};
1060
1061static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
1062 .intctrl = mx51_ecspi_intctrl,
1063 .prepare_message = mx51_ecspi_prepare_message,
1064 .prepare_transfer = mx51_ecspi_prepare_transfer,
1065 .trigger = mx51_ecspi_trigger,
1066 .rx_available = mx51_ecspi_rx_available,
1067 .reset = mx51_ecspi_reset,
1068 .setup_wml = mx51_setup_wml,
1069 .fifo_size = 64,
1070 .has_dmamode = true,
1071 .dynamic_burst = true,
1072 .has_slavemode = true,
1073 .tx_glitch_fixed = true,
1074 .disable = mx51_ecspi_disable,
1075 .devtype = IMX51_ECSPI,
1076};
1077
1078static const struct of_device_id spi_imx_dt_ids[] = {
1079 { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
1080 { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
1081 { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
1082 { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
1083 { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
1084 { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
1085 { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
1086 { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
1087 { /* sentinel */ }
1088};
1089MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
1090
1091static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
1092{
1093 u32 ctrl;
1094
1095 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
1096 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
1097 ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
1098 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
1099}
1100
1101static void spi_imx_push(struct spi_imx_data *spi_imx)
1102{
1103 unsigned int burst_len;
1104
1105 /*
1106 * Reload the FIFO when the remaining bytes to be transferred in the
1107 * current burst is 0. This only applies when bits_per_word is a
1108 * multiple of 8.
1109 */
1110 if (!spi_imx->remainder) {
1111 if (spi_imx->dynamic_burst) {
1112
1113 /* We need to deal unaligned data first */
1114 burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
1115
1116 if (!burst_len)
1117 burst_len = MX51_ECSPI_CTRL_MAX_BURST;
1118
1119 spi_imx_set_burst_len(spi_imx, burst_len * 8);
1120
1121 spi_imx->remainder = burst_len;
1122 } else {
1123 spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
1124 }
1125 }
1126
1127 while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
1128 if (!spi_imx->count)
1129 break;
1130 if (spi_imx->dynamic_burst &&
1131 spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
1132 break;
1133 spi_imx->tx(spi_imx);
1134 spi_imx->txfifo++;
1135 }
1136
1137 if (!spi_imx->slave_mode)
1138 spi_imx->devtype_data->trigger(spi_imx);
1139}
1140
1141static irqreturn_t spi_imx_isr(int irq, void *dev_id)
1142{
1143 struct spi_imx_data *spi_imx = dev_id;
1144
1145 while (spi_imx->txfifo &&
1146 spi_imx->devtype_data->rx_available(spi_imx)) {
1147 spi_imx->rx(spi_imx);
1148 spi_imx->txfifo--;
1149 }
1150
1151 if (spi_imx->count) {
1152 spi_imx_push(spi_imx);
1153 return IRQ_HANDLED;
1154 }
1155
1156 if (spi_imx->txfifo) {
1157 /* No data left to push, but still waiting for rx data,
1158 * enable receive data available interrupt.
1159 */
1160 spi_imx->devtype_data->intctrl(
1161 spi_imx, MXC_INT_RR);
1162 return IRQ_HANDLED;
1163 }
1164
1165 spi_imx->devtype_data->intctrl(spi_imx, 0);
1166 complete(&spi_imx->xfer_done);
1167
1168 return IRQ_HANDLED;
1169}
1170
1171static int spi_imx_dma_configure(struct spi_controller *controller)
1172{
1173 int ret;
1174 enum dma_slave_buswidth buswidth;
1175 struct dma_slave_config rx = {}, tx = {};
1176 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1177
1178 switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
1179 case 4:
1180 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
1181 break;
1182 case 2:
1183 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
1184 break;
1185 case 1:
1186 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
1187 break;
1188 default:
1189 return -EINVAL;
1190 }
1191
1192 tx.direction = DMA_MEM_TO_DEV;
1193 tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
1194 tx.dst_addr_width = buswidth;
1195 tx.dst_maxburst = spi_imx->wml;
1196 ret = dmaengine_slave_config(controller->dma_tx, &tx);
1197 if (ret) {
1198 dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
1199 return ret;
1200 }
1201
1202 rx.direction = DMA_DEV_TO_MEM;
1203 rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
1204 rx.src_addr_width = buswidth;
1205 rx.src_maxburst = spi_imx->wml;
1206 ret = dmaengine_slave_config(controller->dma_rx, &rx);
1207 if (ret) {
1208 dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
1209 return ret;
1210 }
1211
1212 return 0;
1213}
1214
1215static int spi_imx_setupxfer(struct spi_device *spi,
1216 struct spi_transfer *t)
1217{
1218 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1219
1220 if (!t)
1221 return 0;
1222
1223 if (!t->speed_hz) {
1224 if (!spi->max_speed_hz) {
1225 dev_err(&spi->dev, "no speed_hz provided!\n");
1226 return -EINVAL;
1227 }
1228 dev_dbg(&spi->dev, "using spi->max_speed_hz!\n");
1229 spi_imx->spi_bus_clk = spi->max_speed_hz;
1230 } else
1231 spi_imx->spi_bus_clk = t->speed_hz;
1232
1233 spi_imx->bits_per_word = t->bits_per_word;
1234
1235 /*
1236 * Initialize the functions for transfer. To transfer non byte-aligned
1237 * words, we have to use multiple word-size bursts, we can't use
1238 * dynamic_burst in that case.
1239 */
1240 if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
1241 !(spi->mode & SPI_CS_WORD) &&
1242 (spi_imx->bits_per_word == 8 ||
1243 spi_imx->bits_per_word == 16 ||
1244 spi_imx->bits_per_word == 32)) {
1245
1246 spi_imx->rx = spi_imx_buf_rx_swap;
1247 spi_imx->tx = spi_imx_buf_tx_swap;
1248 spi_imx->dynamic_burst = 1;
1249
1250 } else {
1251 if (spi_imx->bits_per_word <= 8) {
1252 spi_imx->rx = spi_imx_buf_rx_u8;
1253 spi_imx->tx = spi_imx_buf_tx_u8;
1254 } else if (spi_imx->bits_per_word <= 16) {
1255 spi_imx->rx = spi_imx_buf_rx_u16;
1256 spi_imx->tx = spi_imx_buf_tx_u16;
1257 } else {
1258 spi_imx->rx = spi_imx_buf_rx_u32;
1259 spi_imx->tx = spi_imx_buf_tx_u32;
1260 }
1261 spi_imx->dynamic_burst = 0;
1262 }
1263
1264 if (spi_imx_can_dma(spi_imx->controller, spi, t))
1265 spi_imx->usedma = true;
1266 else
1267 spi_imx->usedma = false;
1268
1269 spi_imx->rx_only = ((t->tx_buf == NULL)
1270 || (t->tx_buf == spi->controller->dummy_tx));
1271
1272 if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) {
1273 spi_imx->rx = mx53_ecspi_rx_slave;
1274 spi_imx->tx = mx53_ecspi_tx_slave;
1275 spi_imx->slave_burst = t->len;
1276 }
1277
1278 spi_imx->devtype_data->prepare_transfer(spi_imx, spi);
1279
1280 return 0;
1281}
1282
1283static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
1284{
1285 struct spi_controller *controller = spi_imx->controller;
1286
1287 if (controller->dma_rx) {
1288 dma_release_channel(controller->dma_rx);
1289 controller->dma_rx = NULL;
1290 }
1291
1292 if (controller->dma_tx) {
1293 dma_release_channel(controller->dma_tx);
1294 controller->dma_tx = NULL;
1295 }
1296}
1297
1298static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
1299 struct spi_controller *controller)
1300{
1301 int ret;
1302
1303 spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
1304
1305 /* Prepare for TX DMA: */
1306 controller->dma_tx = dma_request_chan(dev, "tx");
1307 if (IS_ERR(controller->dma_tx)) {
1308 ret = PTR_ERR(controller->dma_tx);
1309 dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
1310 controller->dma_tx = NULL;
1311 goto err;
1312 }
1313
1314 /* Prepare for RX : */
1315 controller->dma_rx = dma_request_chan(dev, "rx");
1316 if (IS_ERR(controller->dma_rx)) {
1317 ret = PTR_ERR(controller->dma_rx);
1318 dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
1319 controller->dma_rx = NULL;
1320 goto err;
1321 }
1322
1323 init_completion(&spi_imx->dma_rx_completion);
1324 init_completion(&spi_imx->dma_tx_completion);
1325 controller->can_dma = spi_imx_can_dma;
1326 controller->max_dma_len = MAX_SDMA_BD_BYTES;
1327 spi_imx->controller->flags = SPI_CONTROLLER_MUST_RX |
1328 SPI_CONTROLLER_MUST_TX;
1329
1330 return 0;
1331err:
1332 spi_imx_sdma_exit(spi_imx);
1333 return ret;
1334}
1335
1336static void spi_imx_dma_rx_callback(void *cookie)
1337{
1338 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1339
1340 complete(&spi_imx->dma_rx_completion);
1341}
1342
1343static void spi_imx_dma_tx_callback(void *cookie)
1344{
1345 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1346
1347 complete(&spi_imx->dma_tx_completion);
1348}
1349
1350static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1351{
1352 unsigned long timeout = 0;
1353
1354 /* Time with actual data transfer and CS change delay related to HW */
1355 timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1356
1357 /* Add extra second for scheduler related activities */
1358 timeout += 1;
1359
1360 /* Double calculated timeout */
1361 return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1362}
1363
1364static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1365 struct spi_transfer *transfer)
1366{
1367 struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1368 unsigned long transfer_timeout;
1369 unsigned long timeout;
1370 struct spi_controller *controller = spi_imx->controller;
1371 struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1372 struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
1373 unsigned int bytes_per_word, i;
1374 int ret;
1375
1376 /* Get the right burst length from the last sg to ensure no tail data */
1377 bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
1378 for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
1379 if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
1380 break;
1381 }
1382 /* Use 1 as wml in case no available burst length got */
1383 if (i == 0)
1384 i = 1;
1385
1386 spi_imx->wml = i;
1387
1388 ret = spi_imx_dma_configure(controller);
1389 if (ret)
1390 goto dma_failure_no_start;
1391
1392 if (!spi_imx->devtype_data->setup_wml) {
1393 dev_err(spi_imx->dev, "No setup_wml()?\n");
1394 ret = -EINVAL;
1395 goto dma_failure_no_start;
1396 }
1397 spi_imx->devtype_data->setup_wml(spi_imx);
1398
1399 /*
1400 * The TX DMA setup starts the transfer, so make sure RX is configured
1401 * before TX.
1402 */
1403 desc_rx = dmaengine_prep_slave_sg(controller->dma_rx,
1404 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1405 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1406 if (!desc_rx) {
1407 ret = -EINVAL;
1408 goto dma_failure_no_start;
1409 }
1410
1411 desc_rx->callback = spi_imx_dma_rx_callback;
1412 desc_rx->callback_param = (void *)spi_imx;
1413 dmaengine_submit(desc_rx);
1414 reinit_completion(&spi_imx->dma_rx_completion);
1415 dma_async_issue_pending(controller->dma_rx);
1416
1417 desc_tx = dmaengine_prep_slave_sg(controller->dma_tx,
1418 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1419 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1420 if (!desc_tx) {
1421 dmaengine_terminate_all(controller->dma_tx);
1422 dmaengine_terminate_all(controller->dma_rx);
1423 return -EINVAL;
1424 }
1425
1426 desc_tx->callback = spi_imx_dma_tx_callback;
1427 desc_tx->callback_param = (void *)spi_imx;
1428 dmaengine_submit(desc_tx);
1429 reinit_completion(&spi_imx->dma_tx_completion);
1430 dma_async_issue_pending(controller->dma_tx);
1431
1432 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1433
1434 /* Wait SDMA to finish the data transfer.*/
1435 timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1436 transfer_timeout);
1437 if (!timeout) {
1438 dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1439 dmaengine_terminate_all(controller->dma_tx);
1440 dmaengine_terminate_all(controller->dma_rx);
1441 return -ETIMEDOUT;
1442 }
1443
1444 timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1445 transfer_timeout);
1446 if (!timeout) {
1447 dev_err(&controller->dev, "I/O Error in DMA RX\n");
1448 spi_imx->devtype_data->reset(spi_imx);
1449 dmaengine_terminate_all(controller->dma_rx);
1450 return -ETIMEDOUT;
1451 }
1452
1453 return 0;
1454/* fallback to pio */
1455dma_failure_no_start:
1456 transfer->error |= SPI_TRANS_FAIL_NO_START;
1457 return ret;
1458}
1459
1460static int spi_imx_pio_transfer(struct spi_device *spi,
1461 struct spi_transfer *transfer)
1462{
1463 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1464 unsigned long transfer_timeout;
1465 unsigned long timeout;
1466
1467 spi_imx->tx_buf = transfer->tx_buf;
1468 spi_imx->rx_buf = transfer->rx_buf;
1469 spi_imx->count = transfer->len;
1470 spi_imx->txfifo = 0;
1471 spi_imx->remainder = 0;
1472
1473 reinit_completion(&spi_imx->xfer_done);
1474
1475 spi_imx_push(spi_imx);
1476
1477 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1478
1479 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1480
1481 timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1482 transfer_timeout);
1483 if (!timeout) {
1484 dev_err(&spi->dev, "I/O Error in PIO\n");
1485 spi_imx->devtype_data->reset(spi_imx);
1486 return -ETIMEDOUT;
1487 }
1488
1489 return 0;
1490}
1491
1492static int spi_imx_poll_transfer(struct spi_device *spi,
1493 struct spi_transfer *transfer)
1494{
1495 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1496 unsigned long timeout;
1497
1498 spi_imx->tx_buf = transfer->tx_buf;
1499 spi_imx->rx_buf = transfer->rx_buf;
1500 spi_imx->count = transfer->len;
1501 spi_imx->txfifo = 0;
1502 spi_imx->remainder = 0;
1503
1504 /* fill in the fifo before timeout calculations if we are
1505 * interrupted here, then the data is getting transferred by
1506 * the HW while we are interrupted
1507 */
1508 spi_imx_push(spi_imx);
1509
1510 timeout = spi_imx_calculate_timeout(spi_imx, transfer->len) + jiffies;
1511 while (spi_imx->txfifo) {
1512 /* RX */
1513 while (spi_imx->txfifo &&
1514 spi_imx->devtype_data->rx_available(spi_imx)) {
1515 spi_imx->rx(spi_imx);
1516 spi_imx->txfifo--;
1517 }
1518
1519 /* TX */
1520 if (spi_imx->count) {
1521 spi_imx_push(spi_imx);
1522 continue;
1523 }
1524
1525 if (spi_imx->txfifo &&
1526 time_after(jiffies, timeout)) {
1527
1528 dev_err_ratelimited(&spi->dev,
1529 "timeout period reached: jiffies: %lu- falling back to interrupt mode\n",
1530 jiffies - timeout);
1531
1532 /* fall back to interrupt mode */
1533 return spi_imx_pio_transfer(spi, transfer);
1534 }
1535 }
1536
1537 return 0;
1538}
1539
1540static int spi_imx_pio_transfer_slave(struct spi_device *spi,
1541 struct spi_transfer *transfer)
1542{
1543 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1544 int ret = 0;
1545
1546 if (is_imx53_ecspi(spi_imx) &&
1547 transfer->len > MX53_MAX_TRANSFER_BYTES) {
1548 dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
1549 MX53_MAX_TRANSFER_BYTES);
1550 return -EMSGSIZE;
1551 }
1552
1553 spi_imx->tx_buf = transfer->tx_buf;
1554 spi_imx->rx_buf = transfer->rx_buf;
1555 spi_imx->count = transfer->len;
1556 spi_imx->txfifo = 0;
1557 spi_imx->remainder = 0;
1558
1559 reinit_completion(&spi_imx->xfer_done);
1560 spi_imx->slave_aborted = false;
1561
1562 spi_imx_push(spi_imx);
1563
1564 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE | MXC_INT_RDR);
1565
1566 if (wait_for_completion_interruptible(&spi_imx->xfer_done) ||
1567 spi_imx->slave_aborted) {
1568 dev_dbg(&spi->dev, "interrupted\n");
1569 ret = -EINTR;
1570 }
1571
1572 /* ecspi has a HW issue when works in Slave mode,
1573 * after 64 words writtern to TXFIFO, even TXFIFO becomes empty,
1574 * ECSPI_TXDATA keeps shift out the last word data,
1575 * so we have to disable ECSPI when in slave mode after the
1576 * transfer completes
1577 */
1578 if (spi_imx->devtype_data->disable)
1579 spi_imx->devtype_data->disable(spi_imx);
1580
1581 return ret;
1582}
1583
1584static int spi_imx_transfer_one(struct spi_controller *controller,
1585 struct spi_device *spi,
1586 struct spi_transfer *transfer)
1587{
1588 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1589 unsigned long hz_per_byte, byte_limit;
1590
1591 spi_imx_setupxfer(spi, transfer);
1592 transfer->effective_speed_hz = spi_imx->spi_bus_clk;
1593
1594 /* flush rxfifo before transfer */
1595 while (spi_imx->devtype_data->rx_available(spi_imx))
1596 readl(spi_imx->base + MXC_CSPIRXDATA);
1597
1598 if (spi_imx->slave_mode)
1599 return spi_imx_pio_transfer_slave(spi, transfer);
1600
1601 /*
1602 * If we decided in spi_imx_can_dma() that we want to do a DMA
1603 * transfer, the SPI transfer has already been mapped, so we
1604 * have to do the DMA transfer here.
1605 */
1606 if (spi_imx->usedma)
1607 return spi_imx_dma_transfer(spi_imx, transfer);
1608 /*
1609 * Calculate the estimated time in us the transfer runs. Find
1610 * the number of Hz per byte per polling limit.
1611 */
1612 hz_per_byte = polling_limit_us ? ((8 + 4) * USEC_PER_SEC) / polling_limit_us : 0;
1613 byte_limit = hz_per_byte ? transfer->effective_speed_hz / hz_per_byte : 1;
1614
1615 /* run in polling mode for short transfers */
1616 if (transfer->len < byte_limit)
1617 return spi_imx_poll_transfer(spi, transfer);
1618
1619 return spi_imx_pio_transfer(spi, transfer);
1620}
1621
1622static int spi_imx_setup(struct spi_device *spi)
1623{
1624 dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1625 spi->mode, spi->bits_per_word, spi->max_speed_hz);
1626
1627 return 0;
1628}
1629
1630static void spi_imx_cleanup(struct spi_device *spi)
1631{
1632}
1633
1634static int
1635spi_imx_prepare_message(struct spi_controller *controller, struct spi_message *msg)
1636{
1637 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1638 int ret;
1639
1640 ret = pm_runtime_resume_and_get(spi_imx->dev);
1641 if (ret < 0) {
1642 dev_err(spi_imx->dev, "failed to enable clock\n");
1643 return ret;
1644 }
1645
1646 ret = spi_imx->devtype_data->prepare_message(spi_imx, msg);
1647 if (ret) {
1648 pm_runtime_mark_last_busy(spi_imx->dev);
1649 pm_runtime_put_autosuspend(spi_imx->dev);
1650 }
1651
1652 return ret;
1653}
1654
1655static int
1656spi_imx_unprepare_message(struct spi_controller *controller, struct spi_message *msg)
1657{
1658 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1659
1660 pm_runtime_mark_last_busy(spi_imx->dev);
1661 pm_runtime_put_autosuspend(spi_imx->dev);
1662 return 0;
1663}
1664
1665static int spi_imx_slave_abort(struct spi_controller *controller)
1666{
1667 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1668
1669 spi_imx->slave_aborted = true;
1670 complete(&spi_imx->xfer_done);
1671
1672 return 0;
1673}
1674
1675static int spi_imx_probe(struct platform_device *pdev)
1676{
1677 struct device_node *np = pdev->dev.of_node;
1678 struct spi_controller *controller;
1679 struct spi_imx_data *spi_imx;
1680 struct resource *res;
1681 int ret, irq, spi_drctl;
1682 const struct spi_imx_devtype_data *devtype_data =
1683 of_device_get_match_data(&pdev->dev);
1684 bool slave_mode;
1685 u32 val;
1686
1687 slave_mode = devtype_data->has_slavemode &&
1688 of_property_read_bool(np, "spi-slave");
1689 if (slave_mode)
1690 controller = spi_alloc_slave(&pdev->dev,
1691 sizeof(struct spi_imx_data));
1692 else
1693 controller = spi_alloc_master(&pdev->dev,
1694 sizeof(struct spi_imx_data));
1695 if (!controller)
1696 return -ENOMEM;
1697
1698 ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
1699 if ((ret < 0) || (spi_drctl >= 0x3)) {
1700 /* '11' is reserved */
1701 spi_drctl = 0;
1702 }
1703
1704 platform_set_drvdata(pdev, controller);
1705
1706 controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1707 controller->bus_num = np ? -1 : pdev->id;
1708 controller->use_gpio_descriptors = true;
1709
1710 spi_imx = spi_controller_get_devdata(controller);
1711 spi_imx->controller = controller;
1712 spi_imx->dev = &pdev->dev;
1713 spi_imx->slave_mode = slave_mode;
1714
1715 spi_imx->devtype_data = devtype_data;
1716
1717 /*
1718 * Get number of chip selects from device properties. This can be
1719 * coming from device tree or boardfiles, if it is not defined,
1720 * a default value of 3 chip selects will be used, as all the legacy
1721 * board files have <= 3 chip selects.
1722 */
1723 if (!device_property_read_u32(&pdev->dev, "num-cs", &val))
1724 controller->num_chipselect = val;
1725 else
1726 controller->num_chipselect = 3;
1727
1728 spi_imx->controller->transfer_one = spi_imx_transfer_one;
1729 spi_imx->controller->setup = spi_imx_setup;
1730 spi_imx->controller->cleanup = spi_imx_cleanup;
1731 spi_imx->controller->prepare_message = spi_imx_prepare_message;
1732 spi_imx->controller->unprepare_message = spi_imx_unprepare_message;
1733 spi_imx->controller->slave_abort = spi_imx_slave_abort;
1734 spi_imx->controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS;
1735
1736 if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
1737 is_imx53_ecspi(spi_imx))
1738 spi_imx->controller->mode_bits |= SPI_LOOP | SPI_READY;
1739
1740 if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx))
1741 spi_imx->controller->mode_bits |= SPI_RX_CPHA_FLIP;
1742
1743 if (is_imx51_ecspi(spi_imx) &&
1744 device_property_read_u32(&pdev->dev, "cs-gpios", NULL))
1745 /*
1746 * When using HW-CS implementing SPI_CS_WORD can be done by just
1747 * setting the burst length to the word size. This is
1748 * considerably faster than manually controlling the CS.
1749 */
1750 spi_imx->controller->mode_bits |= SPI_CS_WORD;
1751
1752 spi_imx->spi_drctl = spi_drctl;
1753
1754 init_completion(&spi_imx->xfer_done);
1755
1756 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1757 spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
1758 if (IS_ERR(spi_imx->base)) {
1759 ret = PTR_ERR(spi_imx->base);
1760 goto out_controller_put;
1761 }
1762 spi_imx->base_phys = res->start;
1763
1764 irq = platform_get_irq(pdev, 0);
1765 if (irq < 0) {
1766 ret = irq;
1767 goto out_controller_put;
1768 }
1769
1770 ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1771 dev_name(&pdev->dev), spi_imx);
1772 if (ret) {
1773 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1774 goto out_controller_put;
1775 }
1776
1777 spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1778 if (IS_ERR(spi_imx->clk_ipg)) {
1779 ret = PTR_ERR(spi_imx->clk_ipg);
1780 goto out_controller_put;
1781 }
1782
1783 spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1784 if (IS_ERR(spi_imx->clk_per)) {
1785 ret = PTR_ERR(spi_imx->clk_per);
1786 goto out_controller_put;
1787 }
1788
1789 ret = clk_prepare_enable(spi_imx->clk_per);
1790 if (ret)
1791 goto out_controller_put;
1792
1793 ret = clk_prepare_enable(spi_imx->clk_ipg);
1794 if (ret)
1795 goto out_put_per;
1796
1797 pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
1798 pm_runtime_use_autosuspend(spi_imx->dev);
1799 pm_runtime_get_noresume(spi_imx->dev);
1800 pm_runtime_set_active(spi_imx->dev);
1801 pm_runtime_enable(spi_imx->dev);
1802
1803 spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1804 /*
1805 * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1806 * if validated on other chips.
1807 */
1808 if (spi_imx->devtype_data->has_dmamode) {
1809 ret = spi_imx_sdma_init(&pdev->dev, spi_imx, controller);
1810 if (ret == -EPROBE_DEFER)
1811 goto out_runtime_pm_put;
1812
1813 if (ret < 0)
1814 dev_dbg(&pdev->dev, "dma setup error %d, use pio\n",
1815 ret);
1816 }
1817
1818 spi_imx->devtype_data->reset(spi_imx);
1819
1820 spi_imx->devtype_data->intctrl(spi_imx, 0);
1821
1822 controller->dev.of_node = pdev->dev.of_node;
1823 ret = spi_register_controller(controller);
1824 if (ret) {
1825 dev_err_probe(&pdev->dev, ret, "register controller failed\n");
1826 goto out_register_controller;
1827 }
1828
1829 pm_runtime_mark_last_busy(spi_imx->dev);
1830 pm_runtime_put_autosuspend(spi_imx->dev);
1831
1832 return ret;
1833
1834out_register_controller:
1835 if (spi_imx->devtype_data->has_dmamode)
1836 spi_imx_sdma_exit(spi_imx);
1837out_runtime_pm_put:
1838 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1839 pm_runtime_set_suspended(&pdev->dev);
1840 pm_runtime_disable(spi_imx->dev);
1841
1842 clk_disable_unprepare(spi_imx->clk_ipg);
1843out_put_per:
1844 clk_disable_unprepare(spi_imx->clk_per);
1845out_controller_put:
1846 spi_controller_put(controller);
1847
1848 return ret;
1849}
1850
1851static int spi_imx_remove(struct platform_device *pdev)
1852{
1853 struct spi_controller *controller = platform_get_drvdata(pdev);
1854 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1855 int ret;
1856
1857 spi_unregister_controller(controller);
1858
1859 ret = pm_runtime_resume_and_get(spi_imx->dev);
1860 if (ret < 0) {
1861 dev_err(spi_imx->dev, "failed to enable clock\n");
1862 return ret;
1863 }
1864
1865 writel(0, spi_imx->base + MXC_CSPICTRL);
1866
1867 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1868 pm_runtime_put_sync(spi_imx->dev);
1869 pm_runtime_disable(spi_imx->dev);
1870
1871 spi_imx_sdma_exit(spi_imx);
1872
1873 return 0;
1874}
1875
1876static int __maybe_unused spi_imx_runtime_resume(struct device *dev)
1877{
1878 struct spi_controller *controller = dev_get_drvdata(dev);
1879 struct spi_imx_data *spi_imx;
1880 int ret;
1881
1882 spi_imx = spi_controller_get_devdata(controller);
1883
1884 ret = clk_prepare_enable(spi_imx->clk_per);
1885 if (ret)
1886 return ret;
1887
1888 ret = clk_prepare_enable(spi_imx->clk_ipg);
1889 if (ret) {
1890 clk_disable_unprepare(spi_imx->clk_per);
1891 return ret;
1892 }
1893
1894 return 0;
1895}
1896
1897static int __maybe_unused spi_imx_runtime_suspend(struct device *dev)
1898{
1899 struct spi_controller *controller = dev_get_drvdata(dev);
1900 struct spi_imx_data *spi_imx;
1901
1902 spi_imx = spi_controller_get_devdata(controller);
1903
1904 clk_disable_unprepare(spi_imx->clk_per);
1905 clk_disable_unprepare(spi_imx->clk_ipg);
1906
1907 return 0;
1908}
1909
1910static int __maybe_unused spi_imx_suspend(struct device *dev)
1911{
1912 pinctrl_pm_select_sleep_state(dev);
1913 return 0;
1914}
1915
1916static int __maybe_unused spi_imx_resume(struct device *dev)
1917{
1918 pinctrl_pm_select_default_state(dev);
1919 return 0;
1920}
1921
1922static const struct dev_pm_ops imx_spi_pm = {
1923 SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend,
1924 spi_imx_runtime_resume, NULL)
1925 SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume)
1926};
1927
1928static struct platform_driver spi_imx_driver = {
1929 .driver = {
1930 .name = DRIVER_NAME,
1931 .of_match_table = spi_imx_dt_ids,
1932 .pm = &imx_spi_pm,
1933 },
1934 .probe = spi_imx_probe,
1935 .remove = spi_imx_remove,
1936};
1937module_platform_driver(spi_imx_driver);
1938
1939MODULE_DESCRIPTION("i.MX SPI Controller driver");
1940MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1941MODULE_LICENSE("GPL");
1942MODULE_ALIAS("platform:" DRIVER_NAME);
1/*
2 * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3 * Copyright (C) 2008 Juergen Beisert
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the
16 * Free Software Foundation
17 * 51 Franklin Street, Fifth Floor
18 * Boston, MA 02110-1301, USA.
19 */
20
21#include <linux/clk.h>
22#include <linux/completion.h>
23#include <linux/delay.h>
24#include <linux/dmaengine.h>
25#include <linux/dma-mapping.h>
26#include <linux/err.h>
27#include <linux/gpio.h>
28#include <linux/interrupt.h>
29#include <linux/io.h>
30#include <linux/irq.h>
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/platform_device.h>
34#include <linux/slab.h>
35#include <linux/spi/spi.h>
36#include <linux/spi/spi_bitbang.h>
37#include <linux/types.h>
38#include <linux/of.h>
39#include <linux/of_device.h>
40#include <linux/of_gpio.h>
41
42#include <linux/platform_data/dma-imx.h>
43#include <linux/platform_data/spi-imx.h>
44
45#define DRIVER_NAME "spi_imx"
46
47#define MXC_CSPIRXDATA 0x00
48#define MXC_CSPITXDATA 0x04
49#define MXC_CSPICTRL 0x08
50#define MXC_CSPIINT 0x0c
51#define MXC_RESET 0x1c
52
53/* generic defines to abstract from the different register layouts */
54#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
55#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
56
57/* The maximum bytes that a sdma BD can transfer.*/
58#define MAX_SDMA_BD_BYTES (1 << 15)
59struct spi_imx_config {
60 unsigned int speed_hz;
61 unsigned int bpw;
62};
63
64enum spi_imx_devtype {
65 IMX1_CSPI,
66 IMX21_CSPI,
67 IMX27_CSPI,
68 IMX31_CSPI,
69 IMX35_CSPI, /* CSPI on all i.mx except above */
70 IMX51_ECSPI, /* ECSPI on i.mx51 and later */
71};
72
73struct spi_imx_data;
74
75struct spi_imx_devtype_data {
76 void (*intctrl)(struct spi_imx_data *, int);
77 int (*config)(struct spi_device *, struct spi_imx_config *);
78 void (*trigger)(struct spi_imx_data *);
79 int (*rx_available)(struct spi_imx_data *);
80 void (*reset)(struct spi_imx_data *);
81 enum spi_imx_devtype devtype;
82};
83
84struct spi_imx_data {
85 struct spi_bitbang bitbang;
86 struct device *dev;
87
88 struct completion xfer_done;
89 void __iomem *base;
90 unsigned long base_phys;
91
92 struct clk *clk_per;
93 struct clk *clk_ipg;
94 unsigned long spi_clk;
95 unsigned int spi_bus_clk;
96
97 unsigned int bytes_per_word;
98
99 unsigned int count;
100 void (*tx)(struct spi_imx_data *);
101 void (*rx)(struct spi_imx_data *);
102 void *rx_buf;
103 const void *tx_buf;
104 unsigned int txfifo; /* number of words pushed in tx FIFO */
105
106 /* DMA */
107 bool usedma;
108 u32 wml;
109 struct completion dma_rx_completion;
110 struct completion dma_tx_completion;
111
112 const struct spi_imx_devtype_data *devtype_data;
113};
114
115static inline int is_imx27_cspi(struct spi_imx_data *d)
116{
117 return d->devtype_data->devtype == IMX27_CSPI;
118}
119
120static inline int is_imx35_cspi(struct spi_imx_data *d)
121{
122 return d->devtype_data->devtype == IMX35_CSPI;
123}
124
125static inline int is_imx51_ecspi(struct spi_imx_data *d)
126{
127 return d->devtype_data->devtype == IMX51_ECSPI;
128}
129
130static inline unsigned spi_imx_get_fifosize(struct spi_imx_data *d)
131{
132 return is_imx51_ecspi(d) ? 64 : 8;
133}
134
135#define MXC_SPI_BUF_RX(type) \
136static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
137{ \
138 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
139 \
140 if (spi_imx->rx_buf) { \
141 *(type *)spi_imx->rx_buf = val; \
142 spi_imx->rx_buf += sizeof(type); \
143 } \
144}
145
146#define MXC_SPI_BUF_TX(type) \
147static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
148{ \
149 type val = 0; \
150 \
151 if (spi_imx->tx_buf) { \
152 val = *(type *)spi_imx->tx_buf; \
153 spi_imx->tx_buf += sizeof(type); \
154 } \
155 \
156 spi_imx->count -= sizeof(type); \
157 \
158 writel(val, spi_imx->base + MXC_CSPITXDATA); \
159}
160
161MXC_SPI_BUF_RX(u8)
162MXC_SPI_BUF_TX(u8)
163MXC_SPI_BUF_RX(u16)
164MXC_SPI_BUF_TX(u16)
165MXC_SPI_BUF_RX(u32)
166MXC_SPI_BUF_TX(u32)
167
168/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
169 * (which is currently not the case in this driver)
170 */
171static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
172 256, 384, 512, 768, 1024};
173
174/* MX21, MX27 */
175static unsigned int spi_imx_clkdiv_1(unsigned int fin,
176 unsigned int fspi, unsigned int max, unsigned int *fres)
177{
178 int i;
179
180 for (i = 2; i < max; i++)
181 if (fspi * mxc_clkdivs[i] >= fin)
182 break;
183
184 *fres = fin / mxc_clkdivs[i];
185 return i;
186}
187
188/* MX1, MX31, MX35, MX51 CSPI */
189static unsigned int spi_imx_clkdiv_2(unsigned int fin,
190 unsigned int fspi, unsigned int *fres)
191{
192 int i, div = 4;
193
194 for (i = 0; i < 7; i++) {
195 if (fspi * div >= fin)
196 goto out;
197 div <<= 1;
198 }
199
200out:
201 *fres = fin / div;
202 return i;
203}
204
205static int spi_imx_bytes_per_word(const int bpw)
206{
207 return DIV_ROUND_UP(bpw, BITS_PER_BYTE);
208}
209
210static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
211 struct spi_transfer *transfer)
212{
213 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
214 unsigned int bpw;
215
216 if (!master->dma_rx)
217 return false;
218
219 if (!transfer)
220 return false;
221
222 bpw = transfer->bits_per_word;
223 if (!bpw)
224 bpw = spi->bits_per_word;
225
226 bpw = spi_imx_bytes_per_word(bpw);
227
228 if (bpw != 1 && bpw != 2 && bpw != 4)
229 return false;
230
231 if (transfer->len < spi_imx->wml * bpw)
232 return false;
233
234 if (transfer->len % (spi_imx->wml * bpw))
235 return false;
236
237 return true;
238}
239
240#define MX51_ECSPI_CTRL 0x08
241#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
242#define MX51_ECSPI_CTRL_XCH (1 << 2)
243#define MX51_ECSPI_CTRL_SMC (1 << 3)
244#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
245#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
246#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
247#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
248#define MX51_ECSPI_CTRL_BL_OFFSET 20
249
250#define MX51_ECSPI_CONFIG 0x0c
251#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
252#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
253#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
254#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
255#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20))
256
257#define MX51_ECSPI_INT 0x10
258#define MX51_ECSPI_INT_TEEN (1 << 0)
259#define MX51_ECSPI_INT_RREN (1 << 3)
260
261#define MX51_ECSPI_DMA 0x14
262#define MX51_ECSPI_DMA_TX_WML(wml) ((wml) & 0x3f)
263#define MX51_ECSPI_DMA_RX_WML(wml) (((wml) & 0x3f) << 16)
264#define MX51_ECSPI_DMA_RXT_WML(wml) (((wml) & 0x3f) << 24)
265
266#define MX51_ECSPI_DMA_TEDEN (1 << 7)
267#define MX51_ECSPI_DMA_RXDEN (1 << 23)
268#define MX51_ECSPI_DMA_RXTDEN (1 << 31)
269
270#define MX51_ECSPI_STAT 0x18
271#define MX51_ECSPI_STAT_RR (1 << 3)
272
273#define MX51_ECSPI_TESTREG 0x20
274#define MX51_ECSPI_TESTREG_LBC BIT(31)
275
276/* MX51 eCSPI */
277static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
278 unsigned int fspi, unsigned int *fres)
279{
280 /*
281 * there are two 4-bit dividers, the pre-divider divides by
282 * $pre, the post-divider by 2^$post
283 */
284 unsigned int pre, post;
285 unsigned int fin = spi_imx->spi_clk;
286
287 if (unlikely(fspi > fin))
288 return 0;
289
290 post = fls(fin) - fls(fspi);
291 if (fin > fspi << post)
292 post++;
293
294 /* now we have: (fin <= fspi << post) with post being minimal */
295
296 post = max(4U, post) - 4;
297 if (unlikely(post > 0xf)) {
298 dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
299 fspi, fin);
300 return 0xff;
301 }
302
303 pre = DIV_ROUND_UP(fin, fspi << post) - 1;
304
305 dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
306 __func__, fin, fspi, post, pre);
307
308 /* Resulting frequency for the SCLK line. */
309 *fres = (fin / (pre + 1)) >> post;
310
311 return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
312 (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
313}
314
315static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
316{
317 unsigned val = 0;
318
319 if (enable & MXC_INT_TE)
320 val |= MX51_ECSPI_INT_TEEN;
321
322 if (enable & MXC_INT_RR)
323 val |= MX51_ECSPI_INT_RREN;
324
325 writel(val, spi_imx->base + MX51_ECSPI_INT);
326}
327
328static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
329{
330 u32 reg;
331
332 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
333 reg |= MX51_ECSPI_CTRL_XCH;
334 writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
335}
336
337static int mx51_ecspi_config(struct spi_device *spi,
338 struct spi_imx_config *config)
339{
340 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
341 u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
342 u32 clk = config->speed_hz, delay, reg;
343 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
344
345 /*
346 * The hardware seems to have a race condition when changing modes. The
347 * current assumption is that the selection of the channel arrives
348 * earlier in the hardware than the mode bits when they are written at
349 * the same time.
350 * So set master mode for all channels as we do not support slave mode.
351 */
352 ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
353
354 /* set clock speed */
355 ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
356 spi_imx->spi_bus_clk = clk;
357
358 /* set chip select to use */
359 ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
360
361 ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
362
363 cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
364
365 if (spi->mode & SPI_CPHA)
366 cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
367 else
368 cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
369
370 if (spi->mode & SPI_CPOL) {
371 cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
372 cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
373 } else {
374 cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
375 cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
376 }
377 if (spi->mode & SPI_CS_HIGH)
378 cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
379 else
380 cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
381
382 if (spi_imx->usedma)
383 ctrl |= MX51_ECSPI_CTRL_SMC;
384
385 /* CTRL register always go first to bring out controller from reset */
386 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
387
388 reg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
389 if (spi->mode & SPI_LOOP)
390 reg |= MX51_ECSPI_TESTREG_LBC;
391 else
392 reg &= ~MX51_ECSPI_TESTREG_LBC;
393 writel(reg, spi_imx->base + MX51_ECSPI_TESTREG);
394
395 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
396
397 /*
398 * Wait until the changes in the configuration register CONFIGREG
399 * propagate into the hardware. It takes exactly one tick of the
400 * SCLK clock, but we will wait two SCLK clock just to be sure. The
401 * effect of the delay it takes for the hardware to apply changes
402 * is noticable if the SCLK clock run very slow. In such a case, if
403 * the polarity of SCLK should be inverted, the GPIO ChipSelect might
404 * be asserted before the SCLK polarity changes, which would disrupt
405 * the SPI communication as the device on the other end would consider
406 * the change of SCLK polarity as a clock tick already.
407 */
408 delay = (2 * 1000000) / clk;
409 if (likely(delay < 10)) /* SCLK is faster than 100 kHz */
410 udelay(delay);
411 else /* SCLK is _very_ slow */
412 usleep_range(delay, delay + 10);
413
414 /*
415 * Configure the DMA register: setup the watermark
416 * and enable DMA request.
417 */
418
419 writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml) |
420 MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
421 MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
422 MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
423 MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
424
425 return 0;
426}
427
428static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
429{
430 return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
431}
432
433static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
434{
435 /* drain receive buffer */
436 while (mx51_ecspi_rx_available(spi_imx))
437 readl(spi_imx->base + MXC_CSPIRXDATA);
438}
439
440#define MX31_INTREG_TEEN (1 << 0)
441#define MX31_INTREG_RREN (1 << 3)
442
443#define MX31_CSPICTRL_ENABLE (1 << 0)
444#define MX31_CSPICTRL_MASTER (1 << 1)
445#define MX31_CSPICTRL_XCH (1 << 2)
446#define MX31_CSPICTRL_SMC (1 << 3)
447#define MX31_CSPICTRL_POL (1 << 4)
448#define MX31_CSPICTRL_PHA (1 << 5)
449#define MX31_CSPICTRL_SSCTL (1 << 6)
450#define MX31_CSPICTRL_SSPOL (1 << 7)
451#define MX31_CSPICTRL_BC_SHIFT 8
452#define MX35_CSPICTRL_BL_SHIFT 20
453#define MX31_CSPICTRL_CS_SHIFT 24
454#define MX35_CSPICTRL_CS_SHIFT 12
455#define MX31_CSPICTRL_DR_SHIFT 16
456
457#define MX31_CSPI_DMAREG 0x10
458#define MX31_DMAREG_RH_DEN (1<<4)
459#define MX31_DMAREG_TH_DEN (1<<1)
460
461#define MX31_CSPISTATUS 0x14
462#define MX31_STATUS_RR (1 << 3)
463
464#define MX31_CSPI_TESTREG 0x1C
465#define MX31_TEST_LBC (1 << 14)
466
467/* These functions also work for the i.MX35, but be aware that
468 * the i.MX35 has a slightly different register layout for bits
469 * we do not use here.
470 */
471static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
472{
473 unsigned int val = 0;
474
475 if (enable & MXC_INT_TE)
476 val |= MX31_INTREG_TEEN;
477 if (enable & MXC_INT_RR)
478 val |= MX31_INTREG_RREN;
479
480 writel(val, spi_imx->base + MXC_CSPIINT);
481}
482
483static void mx31_trigger(struct spi_imx_data *spi_imx)
484{
485 unsigned int reg;
486
487 reg = readl(spi_imx->base + MXC_CSPICTRL);
488 reg |= MX31_CSPICTRL_XCH;
489 writel(reg, spi_imx->base + MXC_CSPICTRL);
490}
491
492static int mx31_config(struct spi_device *spi, struct spi_imx_config *config)
493{
494 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
495 unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
496 unsigned int clk;
497
498 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz, &clk) <<
499 MX31_CSPICTRL_DR_SHIFT;
500 spi_imx->spi_bus_clk = clk;
501
502 if (is_imx35_cspi(spi_imx)) {
503 reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
504 reg |= MX31_CSPICTRL_SSCTL;
505 } else {
506 reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
507 }
508
509 if (spi->mode & SPI_CPHA)
510 reg |= MX31_CSPICTRL_PHA;
511 if (spi->mode & SPI_CPOL)
512 reg |= MX31_CSPICTRL_POL;
513 if (spi->mode & SPI_CS_HIGH)
514 reg |= MX31_CSPICTRL_SSPOL;
515 if (spi->cs_gpio < 0)
516 reg |= (spi->cs_gpio + 32) <<
517 (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
518 MX31_CSPICTRL_CS_SHIFT);
519
520 if (spi_imx->usedma)
521 reg |= MX31_CSPICTRL_SMC;
522
523 writel(reg, spi_imx->base + MXC_CSPICTRL);
524
525 reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
526 if (spi->mode & SPI_LOOP)
527 reg |= MX31_TEST_LBC;
528 else
529 reg &= ~MX31_TEST_LBC;
530 writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
531
532 if (spi_imx->usedma) {
533 /* configure DMA requests when RXFIFO is half full and
534 when TXFIFO is half empty */
535 writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
536 spi_imx->base + MX31_CSPI_DMAREG);
537 }
538
539 return 0;
540}
541
542static int mx31_rx_available(struct spi_imx_data *spi_imx)
543{
544 return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
545}
546
547static void mx31_reset(struct spi_imx_data *spi_imx)
548{
549 /* drain receive buffer */
550 while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
551 readl(spi_imx->base + MXC_CSPIRXDATA);
552}
553
554#define MX21_INTREG_RR (1 << 4)
555#define MX21_INTREG_TEEN (1 << 9)
556#define MX21_INTREG_RREN (1 << 13)
557
558#define MX21_CSPICTRL_POL (1 << 5)
559#define MX21_CSPICTRL_PHA (1 << 6)
560#define MX21_CSPICTRL_SSPOL (1 << 8)
561#define MX21_CSPICTRL_XCH (1 << 9)
562#define MX21_CSPICTRL_ENABLE (1 << 10)
563#define MX21_CSPICTRL_MASTER (1 << 11)
564#define MX21_CSPICTRL_DR_SHIFT 14
565#define MX21_CSPICTRL_CS_SHIFT 19
566
567static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
568{
569 unsigned int val = 0;
570
571 if (enable & MXC_INT_TE)
572 val |= MX21_INTREG_TEEN;
573 if (enable & MXC_INT_RR)
574 val |= MX21_INTREG_RREN;
575
576 writel(val, spi_imx->base + MXC_CSPIINT);
577}
578
579static void mx21_trigger(struct spi_imx_data *spi_imx)
580{
581 unsigned int reg;
582
583 reg = readl(spi_imx->base + MXC_CSPICTRL);
584 reg |= MX21_CSPICTRL_XCH;
585 writel(reg, spi_imx->base + MXC_CSPICTRL);
586}
587
588static int mx21_config(struct spi_device *spi, struct spi_imx_config *config)
589{
590 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
591 unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
592 unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
593 unsigned int clk;
594
595 reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz, max, &clk)
596 << MX21_CSPICTRL_DR_SHIFT;
597 spi_imx->spi_bus_clk = clk;
598
599 reg |= config->bpw - 1;
600
601 if (spi->mode & SPI_CPHA)
602 reg |= MX21_CSPICTRL_PHA;
603 if (spi->mode & SPI_CPOL)
604 reg |= MX21_CSPICTRL_POL;
605 if (spi->mode & SPI_CS_HIGH)
606 reg |= MX21_CSPICTRL_SSPOL;
607 if (spi->cs_gpio < 0)
608 reg |= (spi->cs_gpio + 32) << MX21_CSPICTRL_CS_SHIFT;
609
610 writel(reg, spi_imx->base + MXC_CSPICTRL);
611
612 return 0;
613}
614
615static int mx21_rx_available(struct spi_imx_data *spi_imx)
616{
617 return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
618}
619
620static void mx21_reset(struct spi_imx_data *spi_imx)
621{
622 writel(1, spi_imx->base + MXC_RESET);
623}
624
625#define MX1_INTREG_RR (1 << 3)
626#define MX1_INTREG_TEEN (1 << 8)
627#define MX1_INTREG_RREN (1 << 11)
628
629#define MX1_CSPICTRL_POL (1 << 4)
630#define MX1_CSPICTRL_PHA (1 << 5)
631#define MX1_CSPICTRL_XCH (1 << 8)
632#define MX1_CSPICTRL_ENABLE (1 << 9)
633#define MX1_CSPICTRL_MASTER (1 << 10)
634#define MX1_CSPICTRL_DR_SHIFT 13
635
636static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
637{
638 unsigned int val = 0;
639
640 if (enable & MXC_INT_TE)
641 val |= MX1_INTREG_TEEN;
642 if (enable & MXC_INT_RR)
643 val |= MX1_INTREG_RREN;
644
645 writel(val, spi_imx->base + MXC_CSPIINT);
646}
647
648static void mx1_trigger(struct spi_imx_data *spi_imx)
649{
650 unsigned int reg;
651
652 reg = readl(spi_imx->base + MXC_CSPICTRL);
653 reg |= MX1_CSPICTRL_XCH;
654 writel(reg, spi_imx->base + MXC_CSPICTRL);
655}
656
657static int mx1_config(struct spi_device *spi, struct spi_imx_config *config)
658{
659 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
660 unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
661 unsigned int clk;
662
663 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz, &clk) <<
664 MX1_CSPICTRL_DR_SHIFT;
665 spi_imx->spi_bus_clk = clk;
666
667 reg |= config->bpw - 1;
668
669 if (spi->mode & SPI_CPHA)
670 reg |= MX1_CSPICTRL_PHA;
671 if (spi->mode & SPI_CPOL)
672 reg |= MX1_CSPICTRL_POL;
673
674 writel(reg, spi_imx->base + MXC_CSPICTRL);
675
676 return 0;
677}
678
679static int mx1_rx_available(struct spi_imx_data *spi_imx)
680{
681 return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
682}
683
684static void mx1_reset(struct spi_imx_data *spi_imx)
685{
686 writel(1, spi_imx->base + MXC_RESET);
687}
688
689static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
690 .intctrl = mx1_intctrl,
691 .config = mx1_config,
692 .trigger = mx1_trigger,
693 .rx_available = mx1_rx_available,
694 .reset = mx1_reset,
695 .devtype = IMX1_CSPI,
696};
697
698static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
699 .intctrl = mx21_intctrl,
700 .config = mx21_config,
701 .trigger = mx21_trigger,
702 .rx_available = mx21_rx_available,
703 .reset = mx21_reset,
704 .devtype = IMX21_CSPI,
705};
706
707static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
708 /* i.mx27 cspi shares the functions with i.mx21 one */
709 .intctrl = mx21_intctrl,
710 .config = mx21_config,
711 .trigger = mx21_trigger,
712 .rx_available = mx21_rx_available,
713 .reset = mx21_reset,
714 .devtype = IMX27_CSPI,
715};
716
717static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
718 .intctrl = mx31_intctrl,
719 .config = mx31_config,
720 .trigger = mx31_trigger,
721 .rx_available = mx31_rx_available,
722 .reset = mx31_reset,
723 .devtype = IMX31_CSPI,
724};
725
726static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
727 /* i.mx35 and later cspi shares the functions with i.mx31 one */
728 .intctrl = mx31_intctrl,
729 .config = mx31_config,
730 .trigger = mx31_trigger,
731 .rx_available = mx31_rx_available,
732 .reset = mx31_reset,
733 .devtype = IMX35_CSPI,
734};
735
736static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
737 .intctrl = mx51_ecspi_intctrl,
738 .config = mx51_ecspi_config,
739 .trigger = mx51_ecspi_trigger,
740 .rx_available = mx51_ecspi_rx_available,
741 .reset = mx51_ecspi_reset,
742 .devtype = IMX51_ECSPI,
743};
744
745static const struct platform_device_id spi_imx_devtype[] = {
746 {
747 .name = "imx1-cspi",
748 .driver_data = (kernel_ulong_t) &imx1_cspi_devtype_data,
749 }, {
750 .name = "imx21-cspi",
751 .driver_data = (kernel_ulong_t) &imx21_cspi_devtype_data,
752 }, {
753 .name = "imx27-cspi",
754 .driver_data = (kernel_ulong_t) &imx27_cspi_devtype_data,
755 }, {
756 .name = "imx31-cspi",
757 .driver_data = (kernel_ulong_t) &imx31_cspi_devtype_data,
758 }, {
759 .name = "imx35-cspi",
760 .driver_data = (kernel_ulong_t) &imx35_cspi_devtype_data,
761 }, {
762 .name = "imx51-ecspi",
763 .driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data,
764 }, {
765 /* sentinel */
766 }
767};
768
769static const struct of_device_id spi_imx_dt_ids[] = {
770 { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
771 { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
772 { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
773 { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
774 { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
775 { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
776 { /* sentinel */ }
777};
778MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
779
780static void spi_imx_chipselect(struct spi_device *spi, int is_active)
781{
782 int active = is_active != BITBANG_CS_INACTIVE;
783 int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
784
785 if (!gpio_is_valid(spi->cs_gpio))
786 return;
787
788 gpio_set_value(spi->cs_gpio, dev_is_lowactive ^ active);
789}
790
791static void spi_imx_push(struct spi_imx_data *spi_imx)
792{
793 while (spi_imx->txfifo < spi_imx_get_fifosize(spi_imx)) {
794 if (!spi_imx->count)
795 break;
796 spi_imx->tx(spi_imx);
797 spi_imx->txfifo++;
798 }
799
800 spi_imx->devtype_data->trigger(spi_imx);
801}
802
803static irqreturn_t spi_imx_isr(int irq, void *dev_id)
804{
805 struct spi_imx_data *spi_imx = dev_id;
806
807 while (spi_imx->devtype_data->rx_available(spi_imx)) {
808 spi_imx->rx(spi_imx);
809 spi_imx->txfifo--;
810 }
811
812 if (spi_imx->count) {
813 spi_imx_push(spi_imx);
814 return IRQ_HANDLED;
815 }
816
817 if (spi_imx->txfifo) {
818 /* No data left to push, but still waiting for rx data,
819 * enable receive data available interrupt.
820 */
821 spi_imx->devtype_data->intctrl(
822 spi_imx, MXC_INT_RR);
823 return IRQ_HANDLED;
824 }
825
826 spi_imx->devtype_data->intctrl(spi_imx, 0);
827 complete(&spi_imx->xfer_done);
828
829 return IRQ_HANDLED;
830}
831
832static int spi_imx_dma_configure(struct spi_master *master,
833 int bytes_per_word)
834{
835 int ret;
836 enum dma_slave_buswidth buswidth;
837 struct dma_slave_config rx = {}, tx = {};
838 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
839
840 if (bytes_per_word == spi_imx->bytes_per_word)
841 /* Same as last time */
842 return 0;
843
844 switch (bytes_per_word) {
845 case 4:
846 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
847 break;
848 case 2:
849 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
850 break;
851 case 1:
852 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
853 break;
854 default:
855 return -EINVAL;
856 }
857
858 tx.direction = DMA_MEM_TO_DEV;
859 tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
860 tx.dst_addr_width = buswidth;
861 tx.dst_maxburst = spi_imx->wml;
862 ret = dmaengine_slave_config(master->dma_tx, &tx);
863 if (ret) {
864 dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
865 return ret;
866 }
867
868 rx.direction = DMA_DEV_TO_MEM;
869 rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
870 rx.src_addr_width = buswidth;
871 rx.src_maxburst = spi_imx->wml;
872 ret = dmaengine_slave_config(master->dma_rx, &rx);
873 if (ret) {
874 dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
875 return ret;
876 }
877
878 spi_imx->bytes_per_word = bytes_per_word;
879
880 return 0;
881}
882
883static int spi_imx_setupxfer(struct spi_device *spi,
884 struct spi_transfer *t)
885{
886 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
887 struct spi_imx_config config;
888 int ret;
889
890 config.bpw = t ? t->bits_per_word : spi->bits_per_word;
891 config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
892
893 if (!config.speed_hz)
894 config.speed_hz = spi->max_speed_hz;
895 if (!config.bpw)
896 config.bpw = spi->bits_per_word;
897
898 /* Initialize the functions for transfer */
899 if (config.bpw <= 8) {
900 spi_imx->rx = spi_imx_buf_rx_u8;
901 spi_imx->tx = spi_imx_buf_tx_u8;
902 } else if (config.bpw <= 16) {
903 spi_imx->rx = spi_imx_buf_rx_u16;
904 spi_imx->tx = spi_imx_buf_tx_u16;
905 } else {
906 spi_imx->rx = spi_imx_buf_rx_u32;
907 spi_imx->tx = spi_imx_buf_tx_u32;
908 }
909
910 if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
911 spi_imx->usedma = 1;
912 else
913 spi_imx->usedma = 0;
914
915 if (spi_imx->usedma) {
916 ret = spi_imx_dma_configure(spi->master,
917 spi_imx_bytes_per_word(config.bpw));
918 if (ret)
919 return ret;
920 }
921
922 spi_imx->devtype_data->config(spi, &config);
923
924 return 0;
925}
926
927static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
928{
929 struct spi_master *master = spi_imx->bitbang.master;
930
931 if (master->dma_rx) {
932 dma_release_channel(master->dma_rx);
933 master->dma_rx = NULL;
934 }
935
936 if (master->dma_tx) {
937 dma_release_channel(master->dma_tx);
938 master->dma_tx = NULL;
939 }
940}
941
942static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
943 struct spi_master *master)
944{
945 int ret;
946
947 /* use pio mode for i.mx6dl chip TKT238285 */
948 if (of_machine_is_compatible("fsl,imx6dl"))
949 return 0;
950
951 spi_imx->wml = spi_imx_get_fifosize(spi_imx) / 2;
952
953 /* Prepare for TX DMA: */
954 master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
955 if (IS_ERR(master->dma_tx)) {
956 ret = PTR_ERR(master->dma_tx);
957 dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
958 master->dma_tx = NULL;
959 goto err;
960 }
961
962 /* Prepare for RX : */
963 master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
964 if (IS_ERR(master->dma_rx)) {
965 ret = PTR_ERR(master->dma_rx);
966 dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
967 master->dma_rx = NULL;
968 goto err;
969 }
970
971 spi_imx_dma_configure(master, 1);
972
973 init_completion(&spi_imx->dma_rx_completion);
974 init_completion(&spi_imx->dma_tx_completion);
975 master->can_dma = spi_imx_can_dma;
976 master->max_dma_len = MAX_SDMA_BD_BYTES;
977 spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
978 SPI_MASTER_MUST_TX;
979
980 return 0;
981err:
982 spi_imx_sdma_exit(spi_imx);
983 return ret;
984}
985
986static void spi_imx_dma_rx_callback(void *cookie)
987{
988 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
989
990 complete(&spi_imx->dma_rx_completion);
991}
992
993static void spi_imx_dma_tx_callback(void *cookie)
994{
995 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
996
997 complete(&spi_imx->dma_tx_completion);
998}
999
1000static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1001{
1002 unsigned long timeout = 0;
1003
1004 /* Time with actual data transfer and CS change delay related to HW */
1005 timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1006
1007 /* Add extra second for scheduler related activities */
1008 timeout += 1;
1009
1010 /* Double calculated timeout */
1011 return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1012}
1013
1014static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1015 struct spi_transfer *transfer)
1016{
1017 struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1018 unsigned long transfer_timeout;
1019 unsigned long timeout;
1020 struct spi_master *master = spi_imx->bitbang.master;
1021 struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1022
1023 /*
1024 * The TX DMA setup starts the transfer, so make sure RX is configured
1025 * before TX.
1026 */
1027 desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
1028 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1029 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1030 if (!desc_rx)
1031 return -EINVAL;
1032
1033 desc_rx->callback = spi_imx_dma_rx_callback;
1034 desc_rx->callback_param = (void *)spi_imx;
1035 dmaengine_submit(desc_rx);
1036 reinit_completion(&spi_imx->dma_rx_completion);
1037 dma_async_issue_pending(master->dma_rx);
1038
1039 desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
1040 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1041 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1042 if (!desc_tx) {
1043 dmaengine_terminate_all(master->dma_tx);
1044 return -EINVAL;
1045 }
1046
1047 desc_tx->callback = spi_imx_dma_tx_callback;
1048 desc_tx->callback_param = (void *)spi_imx;
1049 dmaengine_submit(desc_tx);
1050 reinit_completion(&spi_imx->dma_tx_completion);
1051 dma_async_issue_pending(master->dma_tx);
1052
1053 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1054
1055 /* Wait SDMA to finish the data transfer.*/
1056 timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1057 transfer_timeout);
1058 if (!timeout) {
1059 dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1060 dmaengine_terminate_all(master->dma_tx);
1061 dmaengine_terminate_all(master->dma_rx);
1062 return -ETIMEDOUT;
1063 }
1064
1065 timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1066 transfer_timeout);
1067 if (!timeout) {
1068 dev_err(&master->dev, "I/O Error in DMA RX\n");
1069 spi_imx->devtype_data->reset(spi_imx);
1070 dmaengine_terminate_all(master->dma_rx);
1071 return -ETIMEDOUT;
1072 }
1073
1074 return transfer->len;
1075}
1076
1077static int spi_imx_pio_transfer(struct spi_device *spi,
1078 struct spi_transfer *transfer)
1079{
1080 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1081 unsigned long transfer_timeout;
1082 unsigned long timeout;
1083
1084 spi_imx->tx_buf = transfer->tx_buf;
1085 spi_imx->rx_buf = transfer->rx_buf;
1086 spi_imx->count = transfer->len;
1087 spi_imx->txfifo = 0;
1088
1089 reinit_completion(&spi_imx->xfer_done);
1090
1091 spi_imx_push(spi_imx);
1092
1093 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1094
1095 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1096
1097 timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1098 transfer_timeout);
1099 if (!timeout) {
1100 dev_err(&spi->dev, "I/O Error in PIO\n");
1101 spi_imx->devtype_data->reset(spi_imx);
1102 return -ETIMEDOUT;
1103 }
1104
1105 return transfer->len;
1106}
1107
1108static int spi_imx_transfer(struct spi_device *spi,
1109 struct spi_transfer *transfer)
1110{
1111 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1112
1113 if (spi_imx->usedma)
1114 return spi_imx_dma_transfer(spi_imx, transfer);
1115 else
1116 return spi_imx_pio_transfer(spi, transfer);
1117}
1118
1119static int spi_imx_setup(struct spi_device *spi)
1120{
1121 dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1122 spi->mode, spi->bits_per_word, spi->max_speed_hz);
1123
1124 if (gpio_is_valid(spi->cs_gpio))
1125 gpio_direction_output(spi->cs_gpio,
1126 spi->mode & SPI_CS_HIGH ? 0 : 1);
1127
1128 spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
1129
1130 return 0;
1131}
1132
1133static void spi_imx_cleanup(struct spi_device *spi)
1134{
1135}
1136
1137static int
1138spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg)
1139{
1140 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1141 int ret;
1142
1143 ret = clk_enable(spi_imx->clk_per);
1144 if (ret)
1145 return ret;
1146
1147 ret = clk_enable(spi_imx->clk_ipg);
1148 if (ret) {
1149 clk_disable(spi_imx->clk_per);
1150 return ret;
1151 }
1152
1153 return 0;
1154}
1155
1156static int
1157spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg)
1158{
1159 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1160
1161 clk_disable(spi_imx->clk_ipg);
1162 clk_disable(spi_imx->clk_per);
1163 return 0;
1164}
1165
1166static int spi_imx_probe(struct platform_device *pdev)
1167{
1168 struct device_node *np = pdev->dev.of_node;
1169 const struct of_device_id *of_id =
1170 of_match_device(spi_imx_dt_ids, &pdev->dev);
1171 struct spi_imx_master *mxc_platform_info =
1172 dev_get_platdata(&pdev->dev);
1173 struct spi_master *master;
1174 struct spi_imx_data *spi_imx;
1175 struct resource *res;
1176 int i, ret, irq;
1177
1178 if (!np && !mxc_platform_info) {
1179 dev_err(&pdev->dev, "can't get the platform data\n");
1180 return -EINVAL;
1181 }
1182
1183 master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
1184 if (!master)
1185 return -ENOMEM;
1186
1187 platform_set_drvdata(pdev, master);
1188
1189 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1190 master->bus_num = np ? -1 : pdev->id;
1191
1192 spi_imx = spi_master_get_devdata(master);
1193 spi_imx->bitbang.master = master;
1194 spi_imx->dev = &pdev->dev;
1195
1196 spi_imx->devtype_data = of_id ? of_id->data :
1197 (struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
1198
1199 if (mxc_platform_info) {
1200 master->num_chipselect = mxc_platform_info->num_chipselect;
1201 master->cs_gpios = devm_kzalloc(&master->dev,
1202 sizeof(int) * master->num_chipselect, GFP_KERNEL);
1203 if (!master->cs_gpios)
1204 return -ENOMEM;
1205
1206 for (i = 0; i < master->num_chipselect; i++)
1207 master->cs_gpios[i] = mxc_platform_info->chipselect[i];
1208 }
1209
1210 spi_imx->bitbang.chipselect = spi_imx_chipselect;
1211 spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
1212 spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
1213 spi_imx->bitbang.master->setup = spi_imx_setup;
1214 spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
1215 spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
1216 spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
1217 spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1218 if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx))
1219 spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
1220
1221 init_completion(&spi_imx->xfer_done);
1222
1223 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1224 spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
1225 if (IS_ERR(spi_imx->base)) {
1226 ret = PTR_ERR(spi_imx->base);
1227 goto out_master_put;
1228 }
1229 spi_imx->base_phys = res->start;
1230
1231 irq = platform_get_irq(pdev, 0);
1232 if (irq < 0) {
1233 ret = irq;
1234 goto out_master_put;
1235 }
1236
1237 ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1238 dev_name(&pdev->dev), spi_imx);
1239 if (ret) {
1240 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1241 goto out_master_put;
1242 }
1243
1244 spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1245 if (IS_ERR(spi_imx->clk_ipg)) {
1246 ret = PTR_ERR(spi_imx->clk_ipg);
1247 goto out_master_put;
1248 }
1249
1250 spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1251 if (IS_ERR(spi_imx->clk_per)) {
1252 ret = PTR_ERR(spi_imx->clk_per);
1253 goto out_master_put;
1254 }
1255
1256 ret = clk_prepare_enable(spi_imx->clk_per);
1257 if (ret)
1258 goto out_master_put;
1259
1260 ret = clk_prepare_enable(spi_imx->clk_ipg);
1261 if (ret)
1262 goto out_put_per;
1263
1264 spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1265 /*
1266 * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1267 * if validated on other chips.
1268 */
1269 if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx)) {
1270 ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
1271 if (ret == -EPROBE_DEFER)
1272 goto out_clk_put;
1273
1274 if (ret < 0)
1275 dev_err(&pdev->dev, "dma setup error %d, use pio\n",
1276 ret);
1277 }
1278
1279 spi_imx->devtype_data->reset(spi_imx);
1280
1281 spi_imx->devtype_data->intctrl(spi_imx, 0);
1282
1283 master->dev.of_node = pdev->dev.of_node;
1284 ret = spi_bitbang_start(&spi_imx->bitbang);
1285 if (ret) {
1286 dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
1287 goto out_clk_put;
1288 }
1289
1290 if (!master->cs_gpios) {
1291 dev_err(&pdev->dev, "No CS GPIOs available\n");
1292 ret = -EINVAL;
1293 goto out_clk_put;
1294 }
1295
1296 for (i = 0; i < master->num_chipselect; i++) {
1297 if (!gpio_is_valid(master->cs_gpios[i]))
1298 continue;
1299
1300 ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
1301 DRIVER_NAME);
1302 if (ret) {
1303 dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
1304 master->cs_gpios[i]);
1305 goto out_clk_put;
1306 }
1307 }
1308
1309 dev_info(&pdev->dev, "probed\n");
1310
1311 clk_disable(spi_imx->clk_ipg);
1312 clk_disable(spi_imx->clk_per);
1313 return ret;
1314
1315out_clk_put:
1316 clk_disable_unprepare(spi_imx->clk_ipg);
1317out_put_per:
1318 clk_disable_unprepare(spi_imx->clk_per);
1319out_master_put:
1320 spi_master_put(master);
1321
1322 return ret;
1323}
1324
1325static int spi_imx_remove(struct platform_device *pdev)
1326{
1327 struct spi_master *master = platform_get_drvdata(pdev);
1328 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1329
1330 spi_bitbang_stop(&spi_imx->bitbang);
1331
1332 writel(0, spi_imx->base + MXC_CSPICTRL);
1333 clk_unprepare(spi_imx->clk_ipg);
1334 clk_unprepare(spi_imx->clk_per);
1335 spi_imx_sdma_exit(spi_imx);
1336 spi_master_put(master);
1337
1338 return 0;
1339}
1340
1341static struct platform_driver spi_imx_driver = {
1342 .driver = {
1343 .name = DRIVER_NAME,
1344 .of_match_table = spi_imx_dt_ids,
1345 },
1346 .id_table = spi_imx_devtype,
1347 .probe = spi_imx_probe,
1348 .remove = spi_imx_remove,
1349};
1350module_platform_driver(spi_imx_driver);
1351
1352MODULE_DESCRIPTION("SPI Master Controller driver");
1353MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1354MODULE_LICENSE("GPL");
1355MODULE_ALIAS("platform:" DRIVER_NAME);