Loading...
1// SPDX-License-Identifier: GPL-2.0+
2// Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3// Copyright (C) 2008 Juergen Beisert
4
5#include <linux/clk.h>
6#include <linux/completion.h>
7#include <linux/delay.h>
8#include <linux/dmaengine.h>
9#include <linux/dma-mapping.h>
10#include <linux/err.h>
11#include <linux/interrupt.h>
12#include <linux/io.h>
13#include <linux/irq.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/pinctrl/consumer.h>
17#include <linux/platform_device.h>
18#include <linux/pm_runtime.h>
19#include <linux/slab.h>
20#include <linux/spi/spi.h>
21#include <linux/types.h>
22#include <linux/of.h>
23#include <linux/of_device.h>
24#include <linux/property.h>
25
26#include <linux/dma/imx-dma.h>
27
28#define DRIVER_NAME "spi_imx"
29
30static bool use_dma = true;
31module_param(use_dma, bool, 0644);
32MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
33
34/* define polling limits */
35static unsigned int polling_limit_us = 30;
36module_param(polling_limit_us, uint, 0664);
37MODULE_PARM_DESC(polling_limit_us,
38 "time in us to run a transfer in polling mode\n");
39
40#define MXC_RPM_TIMEOUT 2000 /* 2000ms */
41
42#define MXC_CSPIRXDATA 0x00
43#define MXC_CSPITXDATA 0x04
44#define MXC_CSPICTRL 0x08
45#define MXC_CSPIINT 0x0c
46#define MXC_RESET 0x1c
47
48/* generic defines to abstract from the different register layouts */
49#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
50#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
51#define MXC_INT_RDR BIT(4) /* Receive date threshold interrupt */
52
53/* The maximum bytes that a sdma BD can transfer. */
54#define MAX_SDMA_BD_BYTES (1 << 15)
55#define MX51_ECSPI_CTRL_MAX_BURST 512
56/* The maximum bytes that IMX53_ECSPI can transfer in slave mode.*/
57#define MX53_MAX_TRANSFER_BYTES 512
58
59enum spi_imx_devtype {
60 IMX1_CSPI,
61 IMX21_CSPI,
62 IMX27_CSPI,
63 IMX31_CSPI,
64 IMX35_CSPI, /* CSPI on all i.mx except above */
65 IMX51_ECSPI, /* ECSPI on i.mx51 */
66 IMX53_ECSPI, /* ECSPI on i.mx53 and later */
67};
68
69struct spi_imx_data;
70
71struct spi_imx_devtype_data {
72 void (*intctrl)(struct spi_imx_data *spi_imx, int enable);
73 int (*prepare_message)(struct spi_imx_data *spi_imx, struct spi_message *msg);
74 int (*prepare_transfer)(struct spi_imx_data *spi_imx, struct spi_device *spi);
75 void (*trigger)(struct spi_imx_data *spi_imx);
76 int (*rx_available)(struct spi_imx_data *spi_imx);
77 void (*reset)(struct spi_imx_data *spi_imx);
78 void (*setup_wml)(struct spi_imx_data *spi_imx);
79 void (*disable)(struct spi_imx_data *spi_imx);
80 bool has_dmamode;
81 bool has_slavemode;
82 unsigned int fifo_size;
83 bool dynamic_burst;
84 /*
85 * ERR009165 fixed or not:
86 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
87 */
88 bool tx_glitch_fixed;
89 enum spi_imx_devtype devtype;
90};
91
92struct spi_imx_data {
93 struct spi_controller *controller;
94 struct device *dev;
95
96 struct completion xfer_done;
97 void __iomem *base;
98 unsigned long base_phys;
99
100 struct clk *clk_per;
101 struct clk *clk_ipg;
102 unsigned long spi_clk;
103 unsigned int spi_bus_clk;
104
105 unsigned int bits_per_word;
106 unsigned int spi_drctl;
107
108 unsigned int count, remainder;
109 void (*tx)(struct spi_imx_data *spi_imx);
110 void (*rx)(struct spi_imx_data *spi_imx);
111 void *rx_buf;
112 const void *tx_buf;
113 unsigned int txfifo; /* number of words pushed in tx FIFO */
114 unsigned int dynamic_burst;
115 bool rx_only;
116
117 /* Slave mode */
118 bool slave_mode;
119 bool slave_aborted;
120 unsigned int slave_burst;
121
122 /* DMA */
123 bool usedma;
124 u32 wml;
125 struct completion dma_rx_completion;
126 struct completion dma_tx_completion;
127
128 const struct spi_imx_devtype_data *devtype_data;
129};
130
131static inline int is_imx27_cspi(struct spi_imx_data *d)
132{
133 return d->devtype_data->devtype == IMX27_CSPI;
134}
135
136static inline int is_imx35_cspi(struct spi_imx_data *d)
137{
138 return d->devtype_data->devtype == IMX35_CSPI;
139}
140
141static inline int is_imx51_ecspi(struct spi_imx_data *d)
142{
143 return d->devtype_data->devtype == IMX51_ECSPI;
144}
145
146static inline int is_imx53_ecspi(struct spi_imx_data *d)
147{
148 return d->devtype_data->devtype == IMX53_ECSPI;
149}
150
151#define MXC_SPI_BUF_RX(type) \
152static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
153{ \
154 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
155 \
156 if (spi_imx->rx_buf) { \
157 *(type *)spi_imx->rx_buf = val; \
158 spi_imx->rx_buf += sizeof(type); \
159 } \
160 \
161 spi_imx->remainder -= sizeof(type); \
162}
163
164#define MXC_SPI_BUF_TX(type) \
165static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
166{ \
167 type val = 0; \
168 \
169 if (spi_imx->tx_buf) { \
170 val = *(type *)spi_imx->tx_buf; \
171 spi_imx->tx_buf += sizeof(type); \
172 } \
173 \
174 spi_imx->count -= sizeof(type); \
175 \
176 writel(val, spi_imx->base + MXC_CSPITXDATA); \
177}
178
179MXC_SPI_BUF_RX(u8)
180MXC_SPI_BUF_TX(u8)
181MXC_SPI_BUF_RX(u16)
182MXC_SPI_BUF_TX(u16)
183MXC_SPI_BUF_RX(u32)
184MXC_SPI_BUF_TX(u32)
185
186/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
187 * (which is currently not the case in this driver)
188 */
189static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
190 256, 384, 512, 768, 1024};
191
192/* MX21, MX27 */
193static unsigned int spi_imx_clkdiv_1(unsigned int fin,
194 unsigned int fspi, unsigned int max, unsigned int *fres)
195{
196 int i;
197
198 for (i = 2; i < max; i++)
199 if (fspi * mxc_clkdivs[i] >= fin)
200 break;
201
202 *fres = fin / mxc_clkdivs[i];
203 return i;
204}
205
206/* MX1, MX31, MX35, MX51 CSPI */
207static unsigned int spi_imx_clkdiv_2(unsigned int fin,
208 unsigned int fspi, unsigned int *fres)
209{
210 int i, div = 4;
211
212 for (i = 0; i < 7; i++) {
213 if (fspi * div >= fin)
214 goto out;
215 div <<= 1;
216 }
217
218out:
219 *fres = fin / div;
220 return i;
221}
222
223static int spi_imx_bytes_per_word(const int bits_per_word)
224{
225 if (bits_per_word <= 8)
226 return 1;
227 else if (bits_per_word <= 16)
228 return 2;
229 else
230 return 4;
231}
232
233static bool spi_imx_can_dma(struct spi_controller *controller, struct spi_device *spi,
234 struct spi_transfer *transfer)
235{
236 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
237
238 if (!use_dma || controller->fallback)
239 return false;
240
241 if (!controller->dma_rx)
242 return false;
243
244 if (spi_imx->slave_mode)
245 return false;
246
247 if (transfer->len < spi_imx->devtype_data->fifo_size)
248 return false;
249
250 spi_imx->dynamic_burst = 0;
251
252 return true;
253}
254
255#define MX51_ECSPI_CTRL 0x08
256#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
257#define MX51_ECSPI_CTRL_XCH (1 << 2)
258#define MX51_ECSPI_CTRL_SMC (1 << 3)
259#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
260#define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16)
261#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
262#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
263#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
264#define MX51_ECSPI_CTRL_BL_OFFSET 20
265#define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20)
266
267#define MX51_ECSPI_CONFIG 0x0c
268#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
269#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
270#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
271#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
272#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20))
273
274#define MX51_ECSPI_INT 0x10
275#define MX51_ECSPI_INT_TEEN (1 << 0)
276#define MX51_ECSPI_INT_RREN (1 << 3)
277#define MX51_ECSPI_INT_RDREN (1 << 4)
278
279#define MX51_ECSPI_DMA 0x14
280#define MX51_ECSPI_DMA_TX_WML(wml) ((wml) & 0x3f)
281#define MX51_ECSPI_DMA_RX_WML(wml) (((wml) & 0x3f) << 16)
282#define MX51_ECSPI_DMA_RXT_WML(wml) (((wml) & 0x3f) << 24)
283
284#define MX51_ECSPI_DMA_TEDEN (1 << 7)
285#define MX51_ECSPI_DMA_RXDEN (1 << 23)
286#define MX51_ECSPI_DMA_RXTDEN (1 << 31)
287
288#define MX51_ECSPI_STAT 0x18
289#define MX51_ECSPI_STAT_RR (1 << 3)
290
291#define MX51_ECSPI_TESTREG 0x20
292#define MX51_ECSPI_TESTREG_LBC BIT(31)
293
294static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
295{
296 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);
297
298 if (spi_imx->rx_buf) {
299#ifdef __LITTLE_ENDIAN
300 unsigned int bytes_per_word;
301
302 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
303 if (bytes_per_word == 1)
304 swab32s(&val);
305 else if (bytes_per_word == 2)
306 swahw32s(&val);
307#endif
308 *(u32 *)spi_imx->rx_buf = val;
309 spi_imx->rx_buf += sizeof(u32);
310 }
311
312 spi_imx->remainder -= sizeof(u32);
313}
314
315static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
316{
317 int unaligned;
318 u32 val;
319
320 unaligned = spi_imx->remainder % 4;
321
322 if (!unaligned) {
323 spi_imx_buf_rx_swap_u32(spi_imx);
324 return;
325 }
326
327 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
328 spi_imx_buf_rx_u16(spi_imx);
329 return;
330 }
331
332 val = readl(spi_imx->base + MXC_CSPIRXDATA);
333
334 while (unaligned--) {
335 if (spi_imx->rx_buf) {
336 *(u8 *)spi_imx->rx_buf = (val >> (8 * unaligned)) & 0xff;
337 spi_imx->rx_buf++;
338 }
339 spi_imx->remainder--;
340 }
341}
342
343static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
344{
345 u32 val = 0;
346#ifdef __LITTLE_ENDIAN
347 unsigned int bytes_per_word;
348#endif
349
350 if (spi_imx->tx_buf) {
351 val = *(u32 *)spi_imx->tx_buf;
352 spi_imx->tx_buf += sizeof(u32);
353 }
354
355 spi_imx->count -= sizeof(u32);
356#ifdef __LITTLE_ENDIAN
357 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
358
359 if (bytes_per_word == 1)
360 swab32s(&val);
361 else if (bytes_per_word == 2)
362 swahw32s(&val);
363#endif
364 writel(val, spi_imx->base + MXC_CSPITXDATA);
365}
366
367static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
368{
369 int unaligned;
370 u32 val = 0;
371
372 unaligned = spi_imx->count % 4;
373
374 if (!unaligned) {
375 spi_imx_buf_tx_swap_u32(spi_imx);
376 return;
377 }
378
379 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
380 spi_imx_buf_tx_u16(spi_imx);
381 return;
382 }
383
384 while (unaligned--) {
385 if (spi_imx->tx_buf) {
386 val |= *(u8 *)spi_imx->tx_buf << (8 * unaligned);
387 spi_imx->tx_buf++;
388 }
389 spi_imx->count--;
390 }
391
392 writel(val, spi_imx->base + MXC_CSPITXDATA);
393}
394
395static void mx53_ecspi_rx_slave(struct spi_imx_data *spi_imx)
396{
397 u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA));
398
399 if (spi_imx->rx_buf) {
400 int n_bytes = spi_imx->slave_burst % sizeof(val);
401
402 if (!n_bytes)
403 n_bytes = sizeof(val);
404
405 memcpy(spi_imx->rx_buf,
406 ((u8 *)&val) + sizeof(val) - n_bytes, n_bytes);
407
408 spi_imx->rx_buf += n_bytes;
409 spi_imx->slave_burst -= n_bytes;
410 }
411
412 spi_imx->remainder -= sizeof(u32);
413}
414
415static void mx53_ecspi_tx_slave(struct spi_imx_data *spi_imx)
416{
417 u32 val = 0;
418 int n_bytes = spi_imx->count % sizeof(val);
419
420 if (!n_bytes)
421 n_bytes = sizeof(val);
422
423 if (spi_imx->tx_buf) {
424 memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
425 spi_imx->tx_buf, n_bytes);
426 val = cpu_to_be32(val);
427 spi_imx->tx_buf += n_bytes;
428 }
429
430 spi_imx->count -= n_bytes;
431
432 writel(val, spi_imx->base + MXC_CSPITXDATA);
433}
434
435/* MX51 eCSPI */
436static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
437 unsigned int fspi, unsigned int *fres)
438{
439 /*
440 * there are two 4-bit dividers, the pre-divider divides by
441 * $pre, the post-divider by 2^$post
442 */
443 unsigned int pre, post;
444 unsigned int fin = spi_imx->spi_clk;
445
446 fspi = min(fspi, fin);
447
448 post = fls(fin) - fls(fspi);
449 if (fin > fspi << post)
450 post++;
451
452 /* now we have: (fin <= fspi << post) with post being minimal */
453
454 post = max(4U, post) - 4;
455 if (unlikely(post > 0xf)) {
456 dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
457 fspi, fin);
458 return 0xff;
459 }
460
461 pre = DIV_ROUND_UP(fin, fspi << post) - 1;
462
463 dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
464 __func__, fin, fspi, post, pre);
465
466 /* Resulting frequency for the SCLK line. */
467 *fres = (fin / (pre + 1)) >> post;
468
469 return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
470 (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
471}
472
473static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
474{
475 unsigned int val = 0;
476
477 if (enable & MXC_INT_TE)
478 val |= MX51_ECSPI_INT_TEEN;
479
480 if (enable & MXC_INT_RR)
481 val |= MX51_ECSPI_INT_RREN;
482
483 if (enable & MXC_INT_RDR)
484 val |= MX51_ECSPI_INT_RDREN;
485
486 writel(val, spi_imx->base + MX51_ECSPI_INT);
487}
488
489static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
490{
491 u32 reg;
492
493 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
494 reg |= MX51_ECSPI_CTRL_XCH;
495 writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
496}
497
498static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
499{
500 u32 ctrl;
501
502 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
503 ctrl &= ~MX51_ECSPI_CTRL_ENABLE;
504 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
505}
506
507static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
508 struct spi_message *msg)
509{
510 struct spi_device *spi = msg->spi;
511 struct spi_transfer *xfer;
512 u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
513 u32 min_speed_hz = ~0U;
514 u32 testreg, delay;
515 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
516 u32 current_cfg = cfg;
517
518 /* set Master or Slave mode */
519 if (spi_imx->slave_mode)
520 ctrl &= ~MX51_ECSPI_CTRL_MODE_MASK;
521 else
522 ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
523
524 /*
525 * Enable SPI_RDY handling (falling edge/level triggered).
526 */
527 if (spi->mode & SPI_READY)
528 ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
529
530 /* set chip select to use */
531 ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
532
533 /*
534 * The ctrl register must be written first, with the EN bit set other
535 * registers must not be written to.
536 */
537 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
538
539 testreg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
540 if (spi->mode & SPI_LOOP)
541 testreg |= MX51_ECSPI_TESTREG_LBC;
542 else
543 testreg &= ~MX51_ECSPI_TESTREG_LBC;
544 writel(testreg, spi_imx->base + MX51_ECSPI_TESTREG);
545
546 /*
547 * eCSPI burst completion by Chip Select signal in Slave mode
548 * is not functional for imx53 Soc, config SPI burst completed when
549 * BURST_LENGTH + 1 bits are received
550 */
551 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
552 cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
553 else
554 cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
555
556 if (spi->mode & SPI_CPOL) {
557 cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
558 cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
559 } else {
560 cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
561 cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
562 }
563
564 if (spi->mode & SPI_CS_HIGH)
565 cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
566 else
567 cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
568
569 if (cfg == current_cfg)
570 return 0;
571
572 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
573
574 /*
575 * Wait until the changes in the configuration register CONFIGREG
576 * propagate into the hardware. It takes exactly one tick of the
577 * SCLK clock, but we will wait two SCLK clock just to be sure. The
578 * effect of the delay it takes for the hardware to apply changes
579 * is noticable if the SCLK clock run very slow. In such a case, if
580 * the polarity of SCLK should be inverted, the GPIO ChipSelect might
581 * be asserted before the SCLK polarity changes, which would disrupt
582 * the SPI communication as the device on the other end would consider
583 * the change of SCLK polarity as a clock tick already.
584 *
585 * Because spi_imx->spi_bus_clk is only set in prepare_message
586 * callback, iterate over all the transfers in spi_message, find the
587 * one with lowest bus frequency, and use that bus frequency for the
588 * delay calculation. In case all transfers have speed_hz == 0, then
589 * min_speed_hz is ~0 and the resulting delay is zero.
590 */
591 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
592 if (!xfer->speed_hz)
593 continue;
594 min_speed_hz = min(xfer->speed_hz, min_speed_hz);
595 }
596
597 delay = (2 * 1000000) / min_speed_hz;
598 if (likely(delay < 10)) /* SCLK is faster than 200 kHz */
599 udelay(delay);
600 else /* SCLK is _very_ slow */
601 usleep_range(delay, delay + 10);
602
603 return 0;
604}
605
606static void mx51_configure_cpha(struct spi_imx_data *spi_imx,
607 struct spi_device *spi)
608{
609 bool cpha = (spi->mode & SPI_CPHA);
610 bool flip_cpha = (spi->mode & SPI_RX_CPHA_FLIP) && spi_imx->rx_only;
611 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
612
613 /* Flip cpha logical value iff flip_cpha */
614 cpha ^= flip_cpha;
615
616 if (cpha)
617 cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
618 else
619 cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
620
621 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
622}
623
624static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
625 struct spi_device *spi)
626{
627 u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
628 u32 clk;
629
630 /* Clear BL field and set the right value */
631 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
632 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
633 ctrl |= (spi_imx->slave_burst * 8 - 1)
634 << MX51_ECSPI_CTRL_BL_OFFSET;
635 else
636 ctrl |= (spi_imx->bits_per_word - 1)
637 << MX51_ECSPI_CTRL_BL_OFFSET;
638
639 /* set clock speed */
640 ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
641 0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
642 ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
643 spi_imx->spi_bus_clk = clk;
644
645 mx51_configure_cpha(spi_imx, spi);
646
647 /*
648 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
649 * before i.mx6ul.
650 */
651 if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
652 ctrl |= MX51_ECSPI_CTRL_SMC;
653 else
654 ctrl &= ~MX51_ECSPI_CTRL_SMC;
655
656 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
657
658 return 0;
659}
660
661static void mx51_setup_wml(struct spi_imx_data *spi_imx)
662{
663 u32 tx_wml = 0;
664
665 if (spi_imx->devtype_data->tx_glitch_fixed)
666 tx_wml = spi_imx->wml;
667 /*
668 * Configure the DMA register: setup the watermark
669 * and enable DMA request.
670 */
671 writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
672 MX51_ECSPI_DMA_TX_WML(tx_wml) |
673 MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
674 MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
675 MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
676}
677
678static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
679{
680 return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
681}
682
683static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
684{
685 /* drain receive buffer */
686 while (mx51_ecspi_rx_available(spi_imx))
687 readl(spi_imx->base + MXC_CSPIRXDATA);
688}
689
690#define MX31_INTREG_TEEN (1 << 0)
691#define MX31_INTREG_RREN (1 << 3)
692
693#define MX31_CSPICTRL_ENABLE (1 << 0)
694#define MX31_CSPICTRL_MASTER (1 << 1)
695#define MX31_CSPICTRL_XCH (1 << 2)
696#define MX31_CSPICTRL_SMC (1 << 3)
697#define MX31_CSPICTRL_POL (1 << 4)
698#define MX31_CSPICTRL_PHA (1 << 5)
699#define MX31_CSPICTRL_SSCTL (1 << 6)
700#define MX31_CSPICTRL_SSPOL (1 << 7)
701#define MX31_CSPICTRL_BC_SHIFT 8
702#define MX35_CSPICTRL_BL_SHIFT 20
703#define MX31_CSPICTRL_CS_SHIFT 24
704#define MX35_CSPICTRL_CS_SHIFT 12
705#define MX31_CSPICTRL_DR_SHIFT 16
706
707#define MX31_CSPI_DMAREG 0x10
708#define MX31_DMAREG_RH_DEN (1<<4)
709#define MX31_DMAREG_TH_DEN (1<<1)
710
711#define MX31_CSPISTATUS 0x14
712#define MX31_STATUS_RR (1 << 3)
713
714#define MX31_CSPI_TESTREG 0x1C
715#define MX31_TEST_LBC (1 << 14)
716
717/* These functions also work for the i.MX35, but be aware that
718 * the i.MX35 has a slightly different register layout for bits
719 * we do not use here.
720 */
721static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
722{
723 unsigned int val = 0;
724
725 if (enable & MXC_INT_TE)
726 val |= MX31_INTREG_TEEN;
727 if (enable & MXC_INT_RR)
728 val |= MX31_INTREG_RREN;
729
730 writel(val, spi_imx->base + MXC_CSPIINT);
731}
732
733static void mx31_trigger(struct spi_imx_data *spi_imx)
734{
735 unsigned int reg;
736
737 reg = readl(spi_imx->base + MXC_CSPICTRL);
738 reg |= MX31_CSPICTRL_XCH;
739 writel(reg, spi_imx->base + MXC_CSPICTRL);
740}
741
742static int mx31_prepare_message(struct spi_imx_data *spi_imx,
743 struct spi_message *msg)
744{
745 return 0;
746}
747
748static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
749 struct spi_device *spi)
750{
751 unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
752 unsigned int clk;
753
754 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
755 MX31_CSPICTRL_DR_SHIFT;
756 spi_imx->spi_bus_clk = clk;
757
758 if (is_imx35_cspi(spi_imx)) {
759 reg |= (spi_imx->bits_per_word - 1) << MX35_CSPICTRL_BL_SHIFT;
760 reg |= MX31_CSPICTRL_SSCTL;
761 } else {
762 reg |= (spi_imx->bits_per_word - 1) << MX31_CSPICTRL_BC_SHIFT;
763 }
764
765 if (spi->mode & SPI_CPHA)
766 reg |= MX31_CSPICTRL_PHA;
767 if (spi->mode & SPI_CPOL)
768 reg |= MX31_CSPICTRL_POL;
769 if (spi->mode & SPI_CS_HIGH)
770 reg |= MX31_CSPICTRL_SSPOL;
771 if (!spi->cs_gpiod)
772 reg |= (spi->chip_select) <<
773 (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
774 MX31_CSPICTRL_CS_SHIFT);
775
776 if (spi_imx->usedma)
777 reg |= MX31_CSPICTRL_SMC;
778
779 writel(reg, spi_imx->base + MXC_CSPICTRL);
780
781 reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
782 if (spi->mode & SPI_LOOP)
783 reg |= MX31_TEST_LBC;
784 else
785 reg &= ~MX31_TEST_LBC;
786 writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
787
788 if (spi_imx->usedma) {
789 /*
790 * configure DMA requests when RXFIFO is half full and
791 * when TXFIFO is half empty
792 */
793 writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
794 spi_imx->base + MX31_CSPI_DMAREG);
795 }
796
797 return 0;
798}
799
800static int mx31_rx_available(struct spi_imx_data *spi_imx)
801{
802 return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
803}
804
805static void mx31_reset(struct spi_imx_data *spi_imx)
806{
807 /* drain receive buffer */
808 while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
809 readl(spi_imx->base + MXC_CSPIRXDATA);
810}
811
812#define MX21_INTREG_RR (1 << 4)
813#define MX21_INTREG_TEEN (1 << 9)
814#define MX21_INTREG_RREN (1 << 13)
815
816#define MX21_CSPICTRL_POL (1 << 5)
817#define MX21_CSPICTRL_PHA (1 << 6)
818#define MX21_CSPICTRL_SSPOL (1 << 8)
819#define MX21_CSPICTRL_XCH (1 << 9)
820#define MX21_CSPICTRL_ENABLE (1 << 10)
821#define MX21_CSPICTRL_MASTER (1 << 11)
822#define MX21_CSPICTRL_DR_SHIFT 14
823#define MX21_CSPICTRL_CS_SHIFT 19
824
825static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
826{
827 unsigned int val = 0;
828
829 if (enable & MXC_INT_TE)
830 val |= MX21_INTREG_TEEN;
831 if (enable & MXC_INT_RR)
832 val |= MX21_INTREG_RREN;
833
834 writel(val, spi_imx->base + MXC_CSPIINT);
835}
836
837static void mx21_trigger(struct spi_imx_data *spi_imx)
838{
839 unsigned int reg;
840
841 reg = readl(spi_imx->base + MXC_CSPICTRL);
842 reg |= MX21_CSPICTRL_XCH;
843 writel(reg, spi_imx->base + MXC_CSPICTRL);
844}
845
846static int mx21_prepare_message(struct spi_imx_data *spi_imx,
847 struct spi_message *msg)
848{
849 return 0;
850}
851
852static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
853 struct spi_device *spi)
854{
855 unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
856 unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
857 unsigned int clk;
858
859 reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, spi_imx->spi_bus_clk, max, &clk)
860 << MX21_CSPICTRL_DR_SHIFT;
861 spi_imx->spi_bus_clk = clk;
862
863 reg |= spi_imx->bits_per_word - 1;
864
865 if (spi->mode & SPI_CPHA)
866 reg |= MX21_CSPICTRL_PHA;
867 if (spi->mode & SPI_CPOL)
868 reg |= MX21_CSPICTRL_POL;
869 if (spi->mode & SPI_CS_HIGH)
870 reg |= MX21_CSPICTRL_SSPOL;
871 if (!spi->cs_gpiod)
872 reg |= spi->chip_select << MX21_CSPICTRL_CS_SHIFT;
873
874 writel(reg, spi_imx->base + MXC_CSPICTRL);
875
876 return 0;
877}
878
879static int mx21_rx_available(struct spi_imx_data *spi_imx)
880{
881 return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
882}
883
884static void mx21_reset(struct spi_imx_data *spi_imx)
885{
886 writel(1, spi_imx->base + MXC_RESET);
887}
888
889#define MX1_INTREG_RR (1 << 3)
890#define MX1_INTREG_TEEN (1 << 8)
891#define MX1_INTREG_RREN (1 << 11)
892
893#define MX1_CSPICTRL_POL (1 << 4)
894#define MX1_CSPICTRL_PHA (1 << 5)
895#define MX1_CSPICTRL_XCH (1 << 8)
896#define MX1_CSPICTRL_ENABLE (1 << 9)
897#define MX1_CSPICTRL_MASTER (1 << 10)
898#define MX1_CSPICTRL_DR_SHIFT 13
899
900static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
901{
902 unsigned int val = 0;
903
904 if (enable & MXC_INT_TE)
905 val |= MX1_INTREG_TEEN;
906 if (enable & MXC_INT_RR)
907 val |= MX1_INTREG_RREN;
908
909 writel(val, spi_imx->base + MXC_CSPIINT);
910}
911
912static void mx1_trigger(struct spi_imx_data *spi_imx)
913{
914 unsigned int reg;
915
916 reg = readl(spi_imx->base + MXC_CSPICTRL);
917 reg |= MX1_CSPICTRL_XCH;
918 writel(reg, spi_imx->base + MXC_CSPICTRL);
919}
920
921static int mx1_prepare_message(struct spi_imx_data *spi_imx,
922 struct spi_message *msg)
923{
924 return 0;
925}
926
927static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
928 struct spi_device *spi)
929{
930 unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
931 unsigned int clk;
932
933 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
934 MX1_CSPICTRL_DR_SHIFT;
935 spi_imx->spi_bus_clk = clk;
936
937 reg |= spi_imx->bits_per_word - 1;
938
939 if (spi->mode & SPI_CPHA)
940 reg |= MX1_CSPICTRL_PHA;
941 if (spi->mode & SPI_CPOL)
942 reg |= MX1_CSPICTRL_POL;
943
944 writel(reg, spi_imx->base + MXC_CSPICTRL);
945
946 return 0;
947}
948
949static int mx1_rx_available(struct spi_imx_data *spi_imx)
950{
951 return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
952}
953
954static void mx1_reset(struct spi_imx_data *spi_imx)
955{
956 writel(1, spi_imx->base + MXC_RESET);
957}
958
959static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
960 .intctrl = mx1_intctrl,
961 .prepare_message = mx1_prepare_message,
962 .prepare_transfer = mx1_prepare_transfer,
963 .trigger = mx1_trigger,
964 .rx_available = mx1_rx_available,
965 .reset = mx1_reset,
966 .fifo_size = 8,
967 .has_dmamode = false,
968 .dynamic_burst = false,
969 .has_slavemode = false,
970 .devtype = IMX1_CSPI,
971};
972
973static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
974 .intctrl = mx21_intctrl,
975 .prepare_message = mx21_prepare_message,
976 .prepare_transfer = mx21_prepare_transfer,
977 .trigger = mx21_trigger,
978 .rx_available = mx21_rx_available,
979 .reset = mx21_reset,
980 .fifo_size = 8,
981 .has_dmamode = false,
982 .dynamic_burst = false,
983 .has_slavemode = false,
984 .devtype = IMX21_CSPI,
985};
986
987static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
988 /* i.mx27 cspi shares the functions with i.mx21 one */
989 .intctrl = mx21_intctrl,
990 .prepare_message = mx21_prepare_message,
991 .prepare_transfer = mx21_prepare_transfer,
992 .trigger = mx21_trigger,
993 .rx_available = mx21_rx_available,
994 .reset = mx21_reset,
995 .fifo_size = 8,
996 .has_dmamode = false,
997 .dynamic_burst = false,
998 .has_slavemode = false,
999 .devtype = IMX27_CSPI,
1000};
1001
1002static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
1003 .intctrl = mx31_intctrl,
1004 .prepare_message = mx31_prepare_message,
1005 .prepare_transfer = mx31_prepare_transfer,
1006 .trigger = mx31_trigger,
1007 .rx_available = mx31_rx_available,
1008 .reset = mx31_reset,
1009 .fifo_size = 8,
1010 .has_dmamode = false,
1011 .dynamic_burst = false,
1012 .has_slavemode = false,
1013 .devtype = IMX31_CSPI,
1014};
1015
1016static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
1017 /* i.mx35 and later cspi shares the functions with i.mx31 one */
1018 .intctrl = mx31_intctrl,
1019 .prepare_message = mx31_prepare_message,
1020 .prepare_transfer = mx31_prepare_transfer,
1021 .trigger = mx31_trigger,
1022 .rx_available = mx31_rx_available,
1023 .reset = mx31_reset,
1024 .fifo_size = 8,
1025 .has_dmamode = true,
1026 .dynamic_burst = false,
1027 .has_slavemode = false,
1028 .devtype = IMX35_CSPI,
1029};
1030
1031static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
1032 .intctrl = mx51_ecspi_intctrl,
1033 .prepare_message = mx51_ecspi_prepare_message,
1034 .prepare_transfer = mx51_ecspi_prepare_transfer,
1035 .trigger = mx51_ecspi_trigger,
1036 .rx_available = mx51_ecspi_rx_available,
1037 .reset = mx51_ecspi_reset,
1038 .setup_wml = mx51_setup_wml,
1039 .fifo_size = 64,
1040 .has_dmamode = true,
1041 .dynamic_burst = true,
1042 .has_slavemode = true,
1043 .disable = mx51_ecspi_disable,
1044 .devtype = IMX51_ECSPI,
1045};
1046
1047static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
1048 .intctrl = mx51_ecspi_intctrl,
1049 .prepare_message = mx51_ecspi_prepare_message,
1050 .prepare_transfer = mx51_ecspi_prepare_transfer,
1051 .trigger = mx51_ecspi_trigger,
1052 .rx_available = mx51_ecspi_rx_available,
1053 .reset = mx51_ecspi_reset,
1054 .fifo_size = 64,
1055 .has_dmamode = true,
1056 .has_slavemode = true,
1057 .disable = mx51_ecspi_disable,
1058 .devtype = IMX53_ECSPI,
1059};
1060
1061static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
1062 .intctrl = mx51_ecspi_intctrl,
1063 .prepare_message = mx51_ecspi_prepare_message,
1064 .prepare_transfer = mx51_ecspi_prepare_transfer,
1065 .trigger = mx51_ecspi_trigger,
1066 .rx_available = mx51_ecspi_rx_available,
1067 .reset = mx51_ecspi_reset,
1068 .setup_wml = mx51_setup_wml,
1069 .fifo_size = 64,
1070 .has_dmamode = true,
1071 .dynamic_burst = true,
1072 .has_slavemode = true,
1073 .tx_glitch_fixed = true,
1074 .disable = mx51_ecspi_disable,
1075 .devtype = IMX51_ECSPI,
1076};
1077
1078static const struct of_device_id spi_imx_dt_ids[] = {
1079 { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
1080 { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
1081 { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
1082 { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
1083 { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
1084 { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
1085 { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
1086 { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
1087 { /* sentinel */ }
1088};
1089MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
1090
1091static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
1092{
1093 u32 ctrl;
1094
1095 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
1096 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
1097 ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
1098 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
1099}
1100
1101static void spi_imx_push(struct spi_imx_data *spi_imx)
1102{
1103 unsigned int burst_len;
1104
1105 /*
1106 * Reload the FIFO when the remaining bytes to be transferred in the
1107 * current burst is 0. This only applies when bits_per_word is a
1108 * multiple of 8.
1109 */
1110 if (!spi_imx->remainder) {
1111 if (spi_imx->dynamic_burst) {
1112
1113 /* We need to deal unaligned data first */
1114 burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
1115
1116 if (!burst_len)
1117 burst_len = MX51_ECSPI_CTRL_MAX_BURST;
1118
1119 spi_imx_set_burst_len(spi_imx, burst_len * 8);
1120
1121 spi_imx->remainder = burst_len;
1122 } else {
1123 spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
1124 }
1125 }
1126
1127 while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
1128 if (!spi_imx->count)
1129 break;
1130 if (spi_imx->dynamic_burst &&
1131 spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
1132 break;
1133 spi_imx->tx(spi_imx);
1134 spi_imx->txfifo++;
1135 }
1136
1137 if (!spi_imx->slave_mode)
1138 spi_imx->devtype_data->trigger(spi_imx);
1139}
1140
1141static irqreturn_t spi_imx_isr(int irq, void *dev_id)
1142{
1143 struct spi_imx_data *spi_imx = dev_id;
1144
1145 while (spi_imx->txfifo &&
1146 spi_imx->devtype_data->rx_available(spi_imx)) {
1147 spi_imx->rx(spi_imx);
1148 spi_imx->txfifo--;
1149 }
1150
1151 if (spi_imx->count) {
1152 spi_imx_push(spi_imx);
1153 return IRQ_HANDLED;
1154 }
1155
1156 if (spi_imx->txfifo) {
1157 /* No data left to push, but still waiting for rx data,
1158 * enable receive data available interrupt.
1159 */
1160 spi_imx->devtype_data->intctrl(
1161 spi_imx, MXC_INT_RR);
1162 return IRQ_HANDLED;
1163 }
1164
1165 spi_imx->devtype_data->intctrl(spi_imx, 0);
1166 complete(&spi_imx->xfer_done);
1167
1168 return IRQ_HANDLED;
1169}
1170
1171static int spi_imx_dma_configure(struct spi_controller *controller)
1172{
1173 int ret;
1174 enum dma_slave_buswidth buswidth;
1175 struct dma_slave_config rx = {}, tx = {};
1176 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1177
1178 switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
1179 case 4:
1180 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
1181 break;
1182 case 2:
1183 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
1184 break;
1185 case 1:
1186 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
1187 break;
1188 default:
1189 return -EINVAL;
1190 }
1191
1192 tx.direction = DMA_MEM_TO_DEV;
1193 tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
1194 tx.dst_addr_width = buswidth;
1195 tx.dst_maxburst = spi_imx->wml;
1196 ret = dmaengine_slave_config(controller->dma_tx, &tx);
1197 if (ret) {
1198 dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
1199 return ret;
1200 }
1201
1202 rx.direction = DMA_DEV_TO_MEM;
1203 rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
1204 rx.src_addr_width = buswidth;
1205 rx.src_maxburst = spi_imx->wml;
1206 ret = dmaengine_slave_config(controller->dma_rx, &rx);
1207 if (ret) {
1208 dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
1209 return ret;
1210 }
1211
1212 return 0;
1213}
1214
1215static int spi_imx_setupxfer(struct spi_device *spi,
1216 struct spi_transfer *t)
1217{
1218 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1219
1220 if (!t)
1221 return 0;
1222
1223 if (!t->speed_hz) {
1224 if (!spi->max_speed_hz) {
1225 dev_err(&spi->dev, "no speed_hz provided!\n");
1226 return -EINVAL;
1227 }
1228 dev_dbg(&spi->dev, "using spi->max_speed_hz!\n");
1229 spi_imx->spi_bus_clk = spi->max_speed_hz;
1230 } else
1231 spi_imx->spi_bus_clk = t->speed_hz;
1232
1233 spi_imx->bits_per_word = t->bits_per_word;
1234
1235 /*
1236 * Initialize the functions for transfer. To transfer non byte-aligned
1237 * words, we have to use multiple word-size bursts, we can't use
1238 * dynamic_burst in that case.
1239 */
1240 if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
1241 !(spi->mode & SPI_CS_WORD) &&
1242 (spi_imx->bits_per_word == 8 ||
1243 spi_imx->bits_per_word == 16 ||
1244 spi_imx->bits_per_word == 32)) {
1245
1246 spi_imx->rx = spi_imx_buf_rx_swap;
1247 spi_imx->tx = spi_imx_buf_tx_swap;
1248 spi_imx->dynamic_burst = 1;
1249
1250 } else {
1251 if (spi_imx->bits_per_word <= 8) {
1252 spi_imx->rx = spi_imx_buf_rx_u8;
1253 spi_imx->tx = spi_imx_buf_tx_u8;
1254 } else if (spi_imx->bits_per_word <= 16) {
1255 spi_imx->rx = spi_imx_buf_rx_u16;
1256 spi_imx->tx = spi_imx_buf_tx_u16;
1257 } else {
1258 spi_imx->rx = spi_imx_buf_rx_u32;
1259 spi_imx->tx = spi_imx_buf_tx_u32;
1260 }
1261 spi_imx->dynamic_burst = 0;
1262 }
1263
1264 if (spi_imx_can_dma(spi_imx->controller, spi, t))
1265 spi_imx->usedma = true;
1266 else
1267 spi_imx->usedma = false;
1268
1269 spi_imx->rx_only = ((t->tx_buf == NULL)
1270 || (t->tx_buf == spi->controller->dummy_tx));
1271
1272 if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) {
1273 spi_imx->rx = mx53_ecspi_rx_slave;
1274 spi_imx->tx = mx53_ecspi_tx_slave;
1275 spi_imx->slave_burst = t->len;
1276 }
1277
1278 spi_imx->devtype_data->prepare_transfer(spi_imx, spi);
1279
1280 return 0;
1281}
1282
1283static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
1284{
1285 struct spi_controller *controller = spi_imx->controller;
1286
1287 if (controller->dma_rx) {
1288 dma_release_channel(controller->dma_rx);
1289 controller->dma_rx = NULL;
1290 }
1291
1292 if (controller->dma_tx) {
1293 dma_release_channel(controller->dma_tx);
1294 controller->dma_tx = NULL;
1295 }
1296}
1297
1298static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
1299 struct spi_controller *controller)
1300{
1301 int ret;
1302
1303 spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
1304
1305 /* Prepare for TX DMA: */
1306 controller->dma_tx = dma_request_chan(dev, "tx");
1307 if (IS_ERR(controller->dma_tx)) {
1308 ret = PTR_ERR(controller->dma_tx);
1309 dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
1310 controller->dma_tx = NULL;
1311 goto err;
1312 }
1313
1314 /* Prepare for RX : */
1315 controller->dma_rx = dma_request_chan(dev, "rx");
1316 if (IS_ERR(controller->dma_rx)) {
1317 ret = PTR_ERR(controller->dma_rx);
1318 dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
1319 controller->dma_rx = NULL;
1320 goto err;
1321 }
1322
1323 init_completion(&spi_imx->dma_rx_completion);
1324 init_completion(&spi_imx->dma_tx_completion);
1325 controller->can_dma = spi_imx_can_dma;
1326 controller->max_dma_len = MAX_SDMA_BD_BYTES;
1327 spi_imx->controller->flags = SPI_CONTROLLER_MUST_RX |
1328 SPI_CONTROLLER_MUST_TX;
1329
1330 return 0;
1331err:
1332 spi_imx_sdma_exit(spi_imx);
1333 return ret;
1334}
1335
1336static void spi_imx_dma_rx_callback(void *cookie)
1337{
1338 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1339
1340 complete(&spi_imx->dma_rx_completion);
1341}
1342
1343static void spi_imx_dma_tx_callback(void *cookie)
1344{
1345 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1346
1347 complete(&spi_imx->dma_tx_completion);
1348}
1349
1350static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1351{
1352 unsigned long timeout = 0;
1353
1354 /* Time with actual data transfer and CS change delay related to HW */
1355 timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1356
1357 /* Add extra second for scheduler related activities */
1358 timeout += 1;
1359
1360 /* Double calculated timeout */
1361 return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1362}
1363
1364static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1365 struct spi_transfer *transfer)
1366{
1367 struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1368 unsigned long transfer_timeout;
1369 unsigned long timeout;
1370 struct spi_controller *controller = spi_imx->controller;
1371 struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1372 struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
1373 unsigned int bytes_per_word, i;
1374 int ret;
1375
1376 /* Get the right burst length from the last sg to ensure no tail data */
1377 bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
1378 for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
1379 if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
1380 break;
1381 }
1382 /* Use 1 as wml in case no available burst length got */
1383 if (i == 0)
1384 i = 1;
1385
1386 spi_imx->wml = i;
1387
1388 ret = spi_imx_dma_configure(controller);
1389 if (ret)
1390 goto dma_failure_no_start;
1391
1392 if (!spi_imx->devtype_data->setup_wml) {
1393 dev_err(spi_imx->dev, "No setup_wml()?\n");
1394 ret = -EINVAL;
1395 goto dma_failure_no_start;
1396 }
1397 spi_imx->devtype_data->setup_wml(spi_imx);
1398
1399 /*
1400 * The TX DMA setup starts the transfer, so make sure RX is configured
1401 * before TX.
1402 */
1403 desc_rx = dmaengine_prep_slave_sg(controller->dma_rx,
1404 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1405 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1406 if (!desc_rx) {
1407 ret = -EINVAL;
1408 goto dma_failure_no_start;
1409 }
1410
1411 desc_rx->callback = spi_imx_dma_rx_callback;
1412 desc_rx->callback_param = (void *)spi_imx;
1413 dmaengine_submit(desc_rx);
1414 reinit_completion(&spi_imx->dma_rx_completion);
1415 dma_async_issue_pending(controller->dma_rx);
1416
1417 desc_tx = dmaengine_prep_slave_sg(controller->dma_tx,
1418 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1419 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1420 if (!desc_tx) {
1421 dmaengine_terminate_all(controller->dma_tx);
1422 dmaengine_terminate_all(controller->dma_rx);
1423 return -EINVAL;
1424 }
1425
1426 desc_tx->callback = spi_imx_dma_tx_callback;
1427 desc_tx->callback_param = (void *)spi_imx;
1428 dmaengine_submit(desc_tx);
1429 reinit_completion(&spi_imx->dma_tx_completion);
1430 dma_async_issue_pending(controller->dma_tx);
1431
1432 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1433
1434 /* Wait SDMA to finish the data transfer.*/
1435 timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1436 transfer_timeout);
1437 if (!timeout) {
1438 dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1439 dmaengine_terminate_all(controller->dma_tx);
1440 dmaengine_terminate_all(controller->dma_rx);
1441 return -ETIMEDOUT;
1442 }
1443
1444 timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1445 transfer_timeout);
1446 if (!timeout) {
1447 dev_err(&controller->dev, "I/O Error in DMA RX\n");
1448 spi_imx->devtype_data->reset(spi_imx);
1449 dmaengine_terminate_all(controller->dma_rx);
1450 return -ETIMEDOUT;
1451 }
1452
1453 return 0;
1454/* fallback to pio */
1455dma_failure_no_start:
1456 transfer->error |= SPI_TRANS_FAIL_NO_START;
1457 return ret;
1458}
1459
1460static int spi_imx_pio_transfer(struct spi_device *spi,
1461 struct spi_transfer *transfer)
1462{
1463 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1464 unsigned long transfer_timeout;
1465 unsigned long timeout;
1466
1467 spi_imx->tx_buf = transfer->tx_buf;
1468 spi_imx->rx_buf = transfer->rx_buf;
1469 spi_imx->count = transfer->len;
1470 spi_imx->txfifo = 0;
1471 spi_imx->remainder = 0;
1472
1473 reinit_completion(&spi_imx->xfer_done);
1474
1475 spi_imx_push(spi_imx);
1476
1477 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1478
1479 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1480
1481 timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1482 transfer_timeout);
1483 if (!timeout) {
1484 dev_err(&spi->dev, "I/O Error in PIO\n");
1485 spi_imx->devtype_data->reset(spi_imx);
1486 return -ETIMEDOUT;
1487 }
1488
1489 return 0;
1490}
1491
1492static int spi_imx_poll_transfer(struct spi_device *spi,
1493 struct spi_transfer *transfer)
1494{
1495 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1496 unsigned long timeout;
1497
1498 spi_imx->tx_buf = transfer->tx_buf;
1499 spi_imx->rx_buf = transfer->rx_buf;
1500 spi_imx->count = transfer->len;
1501 spi_imx->txfifo = 0;
1502 spi_imx->remainder = 0;
1503
1504 /* fill in the fifo before timeout calculations if we are
1505 * interrupted here, then the data is getting transferred by
1506 * the HW while we are interrupted
1507 */
1508 spi_imx_push(spi_imx);
1509
1510 timeout = spi_imx_calculate_timeout(spi_imx, transfer->len) + jiffies;
1511 while (spi_imx->txfifo) {
1512 /* RX */
1513 while (spi_imx->txfifo &&
1514 spi_imx->devtype_data->rx_available(spi_imx)) {
1515 spi_imx->rx(spi_imx);
1516 spi_imx->txfifo--;
1517 }
1518
1519 /* TX */
1520 if (spi_imx->count) {
1521 spi_imx_push(spi_imx);
1522 continue;
1523 }
1524
1525 if (spi_imx->txfifo &&
1526 time_after(jiffies, timeout)) {
1527
1528 dev_err_ratelimited(&spi->dev,
1529 "timeout period reached: jiffies: %lu- falling back to interrupt mode\n",
1530 jiffies - timeout);
1531
1532 /* fall back to interrupt mode */
1533 return spi_imx_pio_transfer(spi, transfer);
1534 }
1535 }
1536
1537 return 0;
1538}
1539
1540static int spi_imx_pio_transfer_slave(struct spi_device *spi,
1541 struct spi_transfer *transfer)
1542{
1543 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1544 int ret = 0;
1545
1546 if (is_imx53_ecspi(spi_imx) &&
1547 transfer->len > MX53_MAX_TRANSFER_BYTES) {
1548 dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
1549 MX53_MAX_TRANSFER_BYTES);
1550 return -EMSGSIZE;
1551 }
1552
1553 spi_imx->tx_buf = transfer->tx_buf;
1554 spi_imx->rx_buf = transfer->rx_buf;
1555 spi_imx->count = transfer->len;
1556 spi_imx->txfifo = 0;
1557 spi_imx->remainder = 0;
1558
1559 reinit_completion(&spi_imx->xfer_done);
1560 spi_imx->slave_aborted = false;
1561
1562 spi_imx_push(spi_imx);
1563
1564 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE | MXC_INT_RDR);
1565
1566 if (wait_for_completion_interruptible(&spi_imx->xfer_done) ||
1567 spi_imx->slave_aborted) {
1568 dev_dbg(&spi->dev, "interrupted\n");
1569 ret = -EINTR;
1570 }
1571
1572 /* ecspi has a HW issue when works in Slave mode,
1573 * after 64 words writtern to TXFIFO, even TXFIFO becomes empty,
1574 * ECSPI_TXDATA keeps shift out the last word data,
1575 * so we have to disable ECSPI when in slave mode after the
1576 * transfer completes
1577 */
1578 if (spi_imx->devtype_data->disable)
1579 spi_imx->devtype_data->disable(spi_imx);
1580
1581 return ret;
1582}
1583
1584static int spi_imx_transfer_one(struct spi_controller *controller,
1585 struct spi_device *spi,
1586 struct spi_transfer *transfer)
1587{
1588 struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
1589 unsigned long hz_per_byte, byte_limit;
1590
1591 spi_imx_setupxfer(spi, transfer);
1592 transfer->effective_speed_hz = spi_imx->spi_bus_clk;
1593
1594 /* flush rxfifo before transfer */
1595 while (spi_imx->devtype_data->rx_available(spi_imx))
1596 readl(spi_imx->base + MXC_CSPIRXDATA);
1597
1598 if (spi_imx->slave_mode)
1599 return spi_imx_pio_transfer_slave(spi, transfer);
1600
1601 /*
1602 * If we decided in spi_imx_can_dma() that we want to do a DMA
1603 * transfer, the SPI transfer has already been mapped, so we
1604 * have to do the DMA transfer here.
1605 */
1606 if (spi_imx->usedma)
1607 return spi_imx_dma_transfer(spi_imx, transfer);
1608 /*
1609 * Calculate the estimated time in us the transfer runs. Find
1610 * the number of Hz per byte per polling limit.
1611 */
1612 hz_per_byte = polling_limit_us ? ((8 + 4) * USEC_PER_SEC) / polling_limit_us : 0;
1613 byte_limit = hz_per_byte ? transfer->effective_speed_hz / hz_per_byte : 1;
1614
1615 /* run in polling mode for short transfers */
1616 if (transfer->len < byte_limit)
1617 return spi_imx_poll_transfer(spi, transfer);
1618
1619 return spi_imx_pio_transfer(spi, transfer);
1620}
1621
1622static int spi_imx_setup(struct spi_device *spi)
1623{
1624 dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1625 spi->mode, spi->bits_per_word, spi->max_speed_hz);
1626
1627 return 0;
1628}
1629
1630static void spi_imx_cleanup(struct spi_device *spi)
1631{
1632}
1633
1634static int
1635spi_imx_prepare_message(struct spi_controller *controller, struct spi_message *msg)
1636{
1637 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1638 int ret;
1639
1640 ret = pm_runtime_resume_and_get(spi_imx->dev);
1641 if (ret < 0) {
1642 dev_err(spi_imx->dev, "failed to enable clock\n");
1643 return ret;
1644 }
1645
1646 ret = spi_imx->devtype_data->prepare_message(spi_imx, msg);
1647 if (ret) {
1648 pm_runtime_mark_last_busy(spi_imx->dev);
1649 pm_runtime_put_autosuspend(spi_imx->dev);
1650 }
1651
1652 return ret;
1653}
1654
1655static int
1656spi_imx_unprepare_message(struct spi_controller *controller, struct spi_message *msg)
1657{
1658 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1659
1660 pm_runtime_mark_last_busy(spi_imx->dev);
1661 pm_runtime_put_autosuspend(spi_imx->dev);
1662 return 0;
1663}
1664
1665static int spi_imx_slave_abort(struct spi_controller *controller)
1666{
1667 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1668
1669 spi_imx->slave_aborted = true;
1670 complete(&spi_imx->xfer_done);
1671
1672 return 0;
1673}
1674
1675static int spi_imx_probe(struct platform_device *pdev)
1676{
1677 struct device_node *np = pdev->dev.of_node;
1678 struct spi_controller *controller;
1679 struct spi_imx_data *spi_imx;
1680 struct resource *res;
1681 int ret, irq, spi_drctl;
1682 const struct spi_imx_devtype_data *devtype_data =
1683 of_device_get_match_data(&pdev->dev);
1684 bool slave_mode;
1685 u32 val;
1686
1687 slave_mode = devtype_data->has_slavemode &&
1688 of_property_read_bool(np, "spi-slave");
1689 if (slave_mode)
1690 controller = spi_alloc_slave(&pdev->dev,
1691 sizeof(struct spi_imx_data));
1692 else
1693 controller = spi_alloc_master(&pdev->dev,
1694 sizeof(struct spi_imx_data));
1695 if (!controller)
1696 return -ENOMEM;
1697
1698 ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
1699 if ((ret < 0) || (spi_drctl >= 0x3)) {
1700 /* '11' is reserved */
1701 spi_drctl = 0;
1702 }
1703
1704 platform_set_drvdata(pdev, controller);
1705
1706 controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1707 controller->bus_num = np ? -1 : pdev->id;
1708 controller->use_gpio_descriptors = true;
1709
1710 spi_imx = spi_controller_get_devdata(controller);
1711 spi_imx->controller = controller;
1712 spi_imx->dev = &pdev->dev;
1713 spi_imx->slave_mode = slave_mode;
1714
1715 spi_imx->devtype_data = devtype_data;
1716
1717 /*
1718 * Get number of chip selects from device properties. This can be
1719 * coming from device tree or boardfiles, if it is not defined,
1720 * a default value of 3 chip selects will be used, as all the legacy
1721 * board files have <= 3 chip selects.
1722 */
1723 if (!device_property_read_u32(&pdev->dev, "num-cs", &val))
1724 controller->num_chipselect = val;
1725 else
1726 controller->num_chipselect = 3;
1727
1728 spi_imx->controller->transfer_one = spi_imx_transfer_one;
1729 spi_imx->controller->setup = spi_imx_setup;
1730 spi_imx->controller->cleanup = spi_imx_cleanup;
1731 spi_imx->controller->prepare_message = spi_imx_prepare_message;
1732 spi_imx->controller->unprepare_message = spi_imx_unprepare_message;
1733 spi_imx->controller->slave_abort = spi_imx_slave_abort;
1734 spi_imx->controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS;
1735
1736 if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
1737 is_imx53_ecspi(spi_imx))
1738 spi_imx->controller->mode_bits |= SPI_LOOP | SPI_READY;
1739
1740 if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx))
1741 spi_imx->controller->mode_bits |= SPI_RX_CPHA_FLIP;
1742
1743 if (is_imx51_ecspi(spi_imx) &&
1744 device_property_read_u32(&pdev->dev, "cs-gpios", NULL))
1745 /*
1746 * When using HW-CS implementing SPI_CS_WORD can be done by just
1747 * setting the burst length to the word size. This is
1748 * considerably faster than manually controlling the CS.
1749 */
1750 spi_imx->controller->mode_bits |= SPI_CS_WORD;
1751
1752 spi_imx->spi_drctl = spi_drctl;
1753
1754 init_completion(&spi_imx->xfer_done);
1755
1756 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1757 spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
1758 if (IS_ERR(spi_imx->base)) {
1759 ret = PTR_ERR(spi_imx->base);
1760 goto out_controller_put;
1761 }
1762 spi_imx->base_phys = res->start;
1763
1764 irq = platform_get_irq(pdev, 0);
1765 if (irq < 0) {
1766 ret = irq;
1767 goto out_controller_put;
1768 }
1769
1770 ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1771 dev_name(&pdev->dev), spi_imx);
1772 if (ret) {
1773 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1774 goto out_controller_put;
1775 }
1776
1777 spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1778 if (IS_ERR(spi_imx->clk_ipg)) {
1779 ret = PTR_ERR(spi_imx->clk_ipg);
1780 goto out_controller_put;
1781 }
1782
1783 spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1784 if (IS_ERR(spi_imx->clk_per)) {
1785 ret = PTR_ERR(spi_imx->clk_per);
1786 goto out_controller_put;
1787 }
1788
1789 ret = clk_prepare_enable(spi_imx->clk_per);
1790 if (ret)
1791 goto out_controller_put;
1792
1793 ret = clk_prepare_enable(spi_imx->clk_ipg);
1794 if (ret)
1795 goto out_put_per;
1796
1797 pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
1798 pm_runtime_use_autosuspend(spi_imx->dev);
1799 pm_runtime_get_noresume(spi_imx->dev);
1800 pm_runtime_set_active(spi_imx->dev);
1801 pm_runtime_enable(spi_imx->dev);
1802
1803 spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1804 /*
1805 * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1806 * if validated on other chips.
1807 */
1808 if (spi_imx->devtype_data->has_dmamode) {
1809 ret = spi_imx_sdma_init(&pdev->dev, spi_imx, controller);
1810 if (ret == -EPROBE_DEFER)
1811 goto out_runtime_pm_put;
1812
1813 if (ret < 0)
1814 dev_dbg(&pdev->dev, "dma setup error %d, use pio\n",
1815 ret);
1816 }
1817
1818 spi_imx->devtype_data->reset(spi_imx);
1819
1820 spi_imx->devtype_data->intctrl(spi_imx, 0);
1821
1822 controller->dev.of_node = pdev->dev.of_node;
1823 ret = spi_register_controller(controller);
1824 if (ret) {
1825 dev_err_probe(&pdev->dev, ret, "register controller failed\n");
1826 goto out_register_controller;
1827 }
1828
1829 pm_runtime_mark_last_busy(spi_imx->dev);
1830 pm_runtime_put_autosuspend(spi_imx->dev);
1831
1832 return ret;
1833
1834out_register_controller:
1835 if (spi_imx->devtype_data->has_dmamode)
1836 spi_imx_sdma_exit(spi_imx);
1837out_runtime_pm_put:
1838 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1839 pm_runtime_set_suspended(&pdev->dev);
1840 pm_runtime_disable(spi_imx->dev);
1841
1842 clk_disable_unprepare(spi_imx->clk_ipg);
1843out_put_per:
1844 clk_disable_unprepare(spi_imx->clk_per);
1845out_controller_put:
1846 spi_controller_put(controller);
1847
1848 return ret;
1849}
1850
1851static int spi_imx_remove(struct platform_device *pdev)
1852{
1853 struct spi_controller *controller = platform_get_drvdata(pdev);
1854 struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
1855 int ret;
1856
1857 spi_unregister_controller(controller);
1858
1859 ret = pm_runtime_resume_and_get(spi_imx->dev);
1860 if (ret < 0) {
1861 dev_err(spi_imx->dev, "failed to enable clock\n");
1862 return ret;
1863 }
1864
1865 writel(0, spi_imx->base + MXC_CSPICTRL);
1866
1867 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1868 pm_runtime_put_sync(spi_imx->dev);
1869 pm_runtime_disable(spi_imx->dev);
1870
1871 spi_imx_sdma_exit(spi_imx);
1872
1873 return 0;
1874}
1875
1876static int __maybe_unused spi_imx_runtime_resume(struct device *dev)
1877{
1878 struct spi_controller *controller = dev_get_drvdata(dev);
1879 struct spi_imx_data *spi_imx;
1880 int ret;
1881
1882 spi_imx = spi_controller_get_devdata(controller);
1883
1884 ret = clk_prepare_enable(spi_imx->clk_per);
1885 if (ret)
1886 return ret;
1887
1888 ret = clk_prepare_enable(spi_imx->clk_ipg);
1889 if (ret) {
1890 clk_disable_unprepare(spi_imx->clk_per);
1891 return ret;
1892 }
1893
1894 return 0;
1895}
1896
1897static int __maybe_unused spi_imx_runtime_suspend(struct device *dev)
1898{
1899 struct spi_controller *controller = dev_get_drvdata(dev);
1900 struct spi_imx_data *spi_imx;
1901
1902 spi_imx = spi_controller_get_devdata(controller);
1903
1904 clk_disable_unprepare(spi_imx->clk_per);
1905 clk_disable_unprepare(spi_imx->clk_ipg);
1906
1907 return 0;
1908}
1909
1910static int __maybe_unused spi_imx_suspend(struct device *dev)
1911{
1912 pinctrl_pm_select_sleep_state(dev);
1913 return 0;
1914}
1915
1916static int __maybe_unused spi_imx_resume(struct device *dev)
1917{
1918 pinctrl_pm_select_default_state(dev);
1919 return 0;
1920}
1921
1922static const struct dev_pm_ops imx_spi_pm = {
1923 SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend,
1924 spi_imx_runtime_resume, NULL)
1925 SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume)
1926};
1927
1928static struct platform_driver spi_imx_driver = {
1929 .driver = {
1930 .name = DRIVER_NAME,
1931 .of_match_table = spi_imx_dt_ids,
1932 .pm = &imx_spi_pm,
1933 },
1934 .probe = spi_imx_probe,
1935 .remove = spi_imx_remove,
1936};
1937module_platform_driver(spi_imx_driver);
1938
1939MODULE_DESCRIPTION("i.MX SPI Controller driver");
1940MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1941MODULE_LICENSE("GPL");
1942MODULE_ALIAS("platform:" DRIVER_NAME);
1// SPDX-License-Identifier: GPL-2.0+
2// Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3// Copyright (C) 2008 Juergen Beisert
4
5#include <linux/clk.h>
6#include <linux/completion.h>
7#include <linux/delay.h>
8#include <linux/dmaengine.h>
9#include <linux/dma-mapping.h>
10#include <linux/err.h>
11#include <linux/interrupt.h>
12#include <linux/io.h>
13#include <linux/irq.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/pinctrl/consumer.h>
17#include <linux/platform_device.h>
18#include <linux/pm_runtime.h>
19#include <linux/slab.h>
20#include <linux/spi/spi.h>
21#include <linux/spi/spi_bitbang.h>
22#include <linux/types.h>
23#include <linux/of.h>
24#include <linux/of_device.h>
25#include <linux/property.h>
26
27#include <linux/platform_data/dma-imx.h>
28
29#define DRIVER_NAME "spi_imx"
30
31static bool use_dma = true;
32module_param(use_dma, bool, 0644);
33MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
34
35#define MXC_RPM_TIMEOUT 2000 /* 2000ms */
36
37#define MXC_CSPIRXDATA 0x00
38#define MXC_CSPITXDATA 0x04
39#define MXC_CSPICTRL 0x08
40#define MXC_CSPIINT 0x0c
41#define MXC_RESET 0x1c
42
43/* generic defines to abstract from the different register layouts */
44#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
45#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
46#define MXC_INT_RDR BIT(4) /* Receive date threshold interrupt */
47
48/* The maximum bytes that a sdma BD can transfer. */
49#define MAX_SDMA_BD_BYTES (1 << 15)
50#define MX51_ECSPI_CTRL_MAX_BURST 512
51/* The maximum bytes that IMX53_ECSPI can transfer in slave mode.*/
52#define MX53_MAX_TRANSFER_BYTES 512
53
54enum spi_imx_devtype {
55 IMX1_CSPI,
56 IMX21_CSPI,
57 IMX27_CSPI,
58 IMX31_CSPI,
59 IMX35_CSPI, /* CSPI on all i.mx except above */
60 IMX51_ECSPI, /* ECSPI on i.mx51 */
61 IMX53_ECSPI, /* ECSPI on i.mx53 and later */
62};
63
64struct spi_imx_data;
65
66struct spi_imx_devtype_data {
67 void (*intctrl)(struct spi_imx_data *, int);
68 int (*prepare_message)(struct spi_imx_data *, struct spi_message *);
69 int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *);
70 void (*trigger)(struct spi_imx_data *);
71 int (*rx_available)(struct spi_imx_data *);
72 void (*reset)(struct spi_imx_data *);
73 void (*setup_wml)(struct spi_imx_data *);
74 void (*disable)(struct spi_imx_data *);
75 void (*disable_dma)(struct spi_imx_data *);
76 bool has_dmamode;
77 bool has_slavemode;
78 unsigned int fifo_size;
79 bool dynamic_burst;
80 enum spi_imx_devtype devtype;
81};
82
83struct spi_imx_data {
84 struct spi_bitbang bitbang;
85 struct device *dev;
86
87 struct completion xfer_done;
88 void __iomem *base;
89 unsigned long base_phys;
90
91 struct clk *clk_per;
92 struct clk *clk_ipg;
93 unsigned long spi_clk;
94 unsigned int spi_bus_clk;
95
96 unsigned int bits_per_word;
97 unsigned int spi_drctl;
98
99 unsigned int count, remainder;
100 void (*tx)(struct spi_imx_data *);
101 void (*rx)(struct spi_imx_data *);
102 void *rx_buf;
103 const void *tx_buf;
104 unsigned int txfifo; /* number of words pushed in tx FIFO */
105 unsigned int dynamic_burst;
106
107 /* Slave mode */
108 bool slave_mode;
109 bool slave_aborted;
110 unsigned int slave_burst;
111
112 /* DMA */
113 bool usedma;
114 u32 wml;
115 struct completion dma_rx_completion;
116 struct completion dma_tx_completion;
117
118 const struct spi_imx_devtype_data *devtype_data;
119};
120
121static inline int is_imx27_cspi(struct spi_imx_data *d)
122{
123 return d->devtype_data->devtype == IMX27_CSPI;
124}
125
126static inline int is_imx35_cspi(struct spi_imx_data *d)
127{
128 return d->devtype_data->devtype == IMX35_CSPI;
129}
130
131static inline int is_imx51_ecspi(struct spi_imx_data *d)
132{
133 return d->devtype_data->devtype == IMX51_ECSPI;
134}
135
136static inline int is_imx53_ecspi(struct spi_imx_data *d)
137{
138 return d->devtype_data->devtype == IMX53_ECSPI;
139}
140
141#define MXC_SPI_BUF_RX(type) \
142static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
143{ \
144 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
145 \
146 if (spi_imx->rx_buf) { \
147 *(type *)spi_imx->rx_buf = val; \
148 spi_imx->rx_buf += sizeof(type); \
149 } \
150 \
151 spi_imx->remainder -= sizeof(type); \
152}
153
154#define MXC_SPI_BUF_TX(type) \
155static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
156{ \
157 type val = 0; \
158 \
159 if (spi_imx->tx_buf) { \
160 val = *(type *)spi_imx->tx_buf; \
161 spi_imx->tx_buf += sizeof(type); \
162 } \
163 \
164 spi_imx->count -= sizeof(type); \
165 \
166 writel(val, spi_imx->base + MXC_CSPITXDATA); \
167}
168
169MXC_SPI_BUF_RX(u8)
170MXC_SPI_BUF_TX(u8)
171MXC_SPI_BUF_RX(u16)
172MXC_SPI_BUF_TX(u16)
173MXC_SPI_BUF_RX(u32)
174MXC_SPI_BUF_TX(u32)
175
176/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
177 * (which is currently not the case in this driver)
178 */
179static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
180 256, 384, 512, 768, 1024};
181
182/* MX21, MX27 */
183static unsigned int spi_imx_clkdiv_1(unsigned int fin,
184 unsigned int fspi, unsigned int max, unsigned int *fres)
185{
186 int i;
187
188 for (i = 2; i < max; i++)
189 if (fspi * mxc_clkdivs[i] >= fin)
190 break;
191
192 *fres = fin / mxc_clkdivs[i];
193 return i;
194}
195
196/* MX1, MX31, MX35, MX51 CSPI */
197static unsigned int spi_imx_clkdiv_2(unsigned int fin,
198 unsigned int fspi, unsigned int *fres)
199{
200 int i, div = 4;
201
202 for (i = 0; i < 7; i++) {
203 if (fspi * div >= fin)
204 goto out;
205 div <<= 1;
206 }
207
208out:
209 *fres = fin / div;
210 return i;
211}
212
213static int spi_imx_bytes_per_word(const int bits_per_word)
214{
215 if (bits_per_word <= 8)
216 return 1;
217 else if (bits_per_word <= 16)
218 return 2;
219 else
220 return 4;
221}
222
223static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
224 struct spi_transfer *transfer)
225{
226 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
227
228 if (!use_dma || master->fallback)
229 return false;
230
231 if (!master->dma_rx)
232 return false;
233
234 if (spi_imx->slave_mode)
235 return false;
236
237 if (transfer->len < spi_imx->devtype_data->fifo_size)
238 return false;
239
240 spi_imx->dynamic_burst = 0;
241
242 return true;
243}
244
245#define MX51_ECSPI_CTRL 0x08
246#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
247#define MX51_ECSPI_CTRL_XCH (1 << 2)
248#define MX51_ECSPI_CTRL_SMC (1 << 3)
249#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
250#define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16)
251#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
252#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
253#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
254#define MX51_ECSPI_CTRL_BL_OFFSET 20
255#define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20)
256
257#define MX51_ECSPI_CONFIG 0x0c
258#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
259#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
260#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
261#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
262#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20))
263
264#define MX51_ECSPI_INT 0x10
265#define MX51_ECSPI_INT_TEEN (1 << 0)
266#define MX51_ECSPI_INT_RREN (1 << 3)
267#define MX51_ECSPI_INT_RDREN (1 << 4)
268
269#define MX51_ECSPI_DMA 0x14
270#define MX51_ECSPI_DMA_TX_WML(wml) ((wml) & 0x3f)
271#define MX51_ECSPI_DMA_RX_WML(wml) (((wml) & 0x3f) << 16)
272#define MX51_ECSPI_DMA_RXT_WML(wml) (((wml) & 0x3f) << 24)
273
274#define MX51_ECSPI_DMA_TEDEN (1 << 7)
275#define MX51_ECSPI_DMA_RXDEN (1 << 23)
276#define MX51_ECSPI_DMA_RXTDEN (1 << 31)
277
278#define MX51_ECSPI_STAT 0x18
279#define MX51_ECSPI_STAT_RR (1 << 3)
280
281#define MX51_ECSPI_TESTREG 0x20
282#define MX51_ECSPI_TESTREG_LBC BIT(31)
283
284static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
285{
286 unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);
287#ifdef __LITTLE_ENDIAN
288 unsigned int bytes_per_word;
289#endif
290
291 if (spi_imx->rx_buf) {
292#ifdef __LITTLE_ENDIAN
293 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
294 if (bytes_per_word == 1)
295 val = cpu_to_be32(val);
296 else if (bytes_per_word == 2)
297 val = (val << 16) | (val >> 16);
298#endif
299 *(u32 *)spi_imx->rx_buf = val;
300 spi_imx->rx_buf += sizeof(u32);
301 }
302
303 spi_imx->remainder -= sizeof(u32);
304}
305
306static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
307{
308 int unaligned;
309 u32 val;
310
311 unaligned = spi_imx->remainder % 4;
312
313 if (!unaligned) {
314 spi_imx_buf_rx_swap_u32(spi_imx);
315 return;
316 }
317
318 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
319 spi_imx_buf_rx_u16(spi_imx);
320 return;
321 }
322
323 val = readl(spi_imx->base + MXC_CSPIRXDATA);
324
325 while (unaligned--) {
326 if (spi_imx->rx_buf) {
327 *(u8 *)spi_imx->rx_buf = (val >> (8 * unaligned)) & 0xff;
328 spi_imx->rx_buf++;
329 }
330 spi_imx->remainder--;
331 }
332}
333
334static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
335{
336 u32 val = 0;
337#ifdef __LITTLE_ENDIAN
338 unsigned int bytes_per_word;
339#endif
340
341 if (spi_imx->tx_buf) {
342 val = *(u32 *)spi_imx->tx_buf;
343 spi_imx->tx_buf += sizeof(u32);
344 }
345
346 spi_imx->count -= sizeof(u32);
347#ifdef __LITTLE_ENDIAN
348 bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
349
350 if (bytes_per_word == 1)
351 val = cpu_to_be32(val);
352 else if (bytes_per_word == 2)
353 val = (val << 16) | (val >> 16);
354#endif
355 writel(val, spi_imx->base + MXC_CSPITXDATA);
356}
357
358static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
359{
360 int unaligned;
361 u32 val = 0;
362
363 unaligned = spi_imx->count % 4;
364
365 if (!unaligned) {
366 spi_imx_buf_tx_swap_u32(spi_imx);
367 return;
368 }
369
370 if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
371 spi_imx_buf_tx_u16(spi_imx);
372 return;
373 }
374
375 while (unaligned--) {
376 if (spi_imx->tx_buf) {
377 val |= *(u8 *)spi_imx->tx_buf << (8 * unaligned);
378 spi_imx->tx_buf++;
379 }
380 spi_imx->count--;
381 }
382
383 writel(val, spi_imx->base + MXC_CSPITXDATA);
384}
385
386static void mx53_ecspi_rx_slave(struct spi_imx_data *spi_imx)
387{
388 u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA));
389
390 if (spi_imx->rx_buf) {
391 int n_bytes = spi_imx->slave_burst % sizeof(val);
392
393 if (!n_bytes)
394 n_bytes = sizeof(val);
395
396 memcpy(spi_imx->rx_buf,
397 ((u8 *)&val) + sizeof(val) - n_bytes, n_bytes);
398
399 spi_imx->rx_buf += n_bytes;
400 spi_imx->slave_burst -= n_bytes;
401 }
402
403 spi_imx->remainder -= sizeof(u32);
404}
405
406static void mx53_ecspi_tx_slave(struct spi_imx_data *spi_imx)
407{
408 u32 val = 0;
409 int n_bytes = spi_imx->count % sizeof(val);
410
411 if (!n_bytes)
412 n_bytes = sizeof(val);
413
414 if (spi_imx->tx_buf) {
415 memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
416 spi_imx->tx_buf, n_bytes);
417 val = cpu_to_be32(val);
418 spi_imx->tx_buf += n_bytes;
419 }
420
421 spi_imx->count -= n_bytes;
422
423 writel(val, spi_imx->base + MXC_CSPITXDATA);
424}
425
426/* MX51 eCSPI */
427static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
428 unsigned int fspi, unsigned int *fres)
429{
430 /*
431 * there are two 4-bit dividers, the pre-divider divides by
432 * $pre, the post-divider by 2^$post
433 */
434 unsigned int pre, post;
435 unsigned int fin = spi_imx->spi_clk;
436
437 if (unlikely(fspi > fin))
438 return 0;
439
440 post = fls(fin) - fls(fspi);
441 if (fin > fspi << post)
442 post++;
443
444 /* now we have: (fin <= fspi << post) with post being minimal */
445
446 post = max(4U, post) - 4;
447 if (unlikely(post > 0xf)) {
448 dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
449 fspi, fin);
450 return 0xff;
451 }
452
453 pre = DIV_ROUND_UP(fin, fspi << post) - 1;
454
455 dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
456 __func__, fin, fspi, post, pre);
457
458 /* Resulting frequency for the SCLK line. */
459 *fres = (fin / (pre + 1)) >> post;
460
461 return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
462 (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
463}
464
465static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
466{
467 unsigned val = 0;
468
469 if (enable & MXC_INT_TE)
470 val |= MX51_ECSPI_INT_TEEN;
471
472 if (enable & MXC_INT_RR)
473 val |= MX51_ECSPI_INT_RREN;
474
475 if (enable & MXC_INT_RDR)
476 val |= MX51_ECSPI_INT_RDREN;
477
478 writel(val, spi_imx->base + MX51_ECSPI_INT);
479}
480
481static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
482{
483 u32 reg;
484
485 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
486 reg |= MX51_ECSPI_CTRL_XCH;
487 writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
488}
489
490static void mx51_disable_dma(struct spi_imx_data *spi_imx)
491{
492 writel(0, spi_imx->base + MX51_ECSPI_DMA);
493}
494
495static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
496{
497 u32 ctrl;
498
499 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
500 ctrl &= ~MX51_ECSPI_CTRL_ENABLE;
501 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
502}
503
504static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
505 struct spi_message *msg)
506{
507 struct spi_device *spi = msg->spi;
508 struct spi_transfer *xfer;
509 u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
510 u32 min_speed_hz = ~0U;
511 u32 testreg, delay;
512 u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
513
514 /* set Master or Slave mode */
515 if (spi_imx->slave_mode)
516 ctrl &= ~MX51_ECSPI_CTRL_MODE_MASK;
517 else
518 ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
519
520 /*
521 * Enable SPI_RDY handling (falling edge/level triggered).
522 */
523 if (spi->mode & SPI_READY)
524 ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
525
526 /* set chip select to use */
527 ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
528
529 /*
530 * The ctrl register must be written first, with the EN bit set other
531 * registers must not be written to.
532 */
533 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
534
535 testreg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
536 if (spi->mode & SPI_LOOP)
537 testreg |= MX51_ECSPI_TESTREG_LBC;
538 else
539 testreg &= ~MX51_ECSPI_TESTREG_LBC;
540 writel(testreg, spi_imx->base + MX51_ECSPI_TESTREG);
541
542 /*
543 * eCSPI burst completion by Chip Select signal in Slave mode
544 * is not functional for imx53 Soc, config SPI burst completed when
545 * BURST_LENGTH + 1 bits are received
546 */
547 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
548 cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
549 else
550 cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
551
552 if (spi->mode & SPI_CPHA)
553 cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
554 else
555 cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
556
557 if (spi->mode & SPI_CPOL) {
558 cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
559 cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
560 } else {
561 cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
562 cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
563 }
564
565 if (spi->mode & SPI_CS_HIGH)
566 cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
567 else
568 cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
569
570 writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
571
572 /*
573 * Wait until the changes in the configuration register CONFIGREG
574 * propagate into the hardware. It takes exactly one tick of the
575 * SCLK clock, but we will wait two SCLK clock just to be sure. The
576 * effect of the delay it takes for the hardware to apply changes
577 * is noticable if the SCLK clock run very slow. In such a case, if
578 * the polarity of SCLK should be inverted, the GPIO ChipSelect might
579 * be asserted before the SCLK polarity changes, which would disrupt
580 * the SPI communication as the device on the other end would consider
581 * the change of SCLK polarity as a clock tick already.
582 *
583 * Because spi_imx->spi_bus_clk is only set in bitbang prepare_message
584 * callback, iterate over all the transfers in spi_message, find the
585 * one with lowest bus frequency, and use that bus frequency for the
586 * delay calculation. In case all transfers have speed_hz == 0, then
587 * min_speed_hz is ~0 and the resulting delay is zero.
588 */
589 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
590 if (!xfer->speed_hz)
591 continue;
592 min_speed_hz = min(xfer->speed_hz, min_speed_hz);
593 }
594
595 delay = (2 * 1000000) / min_speed_hz;
596 if (likely(delay < 10)) /* SCLK is faster than 200 kHz */
597 udelay(delay);
598 else /* SCLK is _very_ slow */
599 usleep_range(delay, delay + 10);
600
601 return 0;
602}
603
604static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
605 struct spi_device *spi)
606{
607 u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
608 u32 clk;
609
610 /* Clear BL field and set the right value */
611 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
612 if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
613 ctrl |= (spi_imx->slave_burst * 8 - 1)
614 << MX51_ECSPI_CTRL_BL_OFFSET;
615 else
616 ctrl |= (spi_imx->bits_per_word - 1)
617 << MX51_ECSPI_CTRL_BL_OFFSET;
618
619 /* set clock speed */
620 ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
621 0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
622 ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
623 spi_imx->spi_bus_clk = clk;
624
625 if (spi_imx->usedma)
626 ctrl |= MX51_ECSPI_CTRL_SMC;
627
628 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
629
630 return 0;
631}
632
633static void mx51_setup_wml(struct spi_imx_data *spi_imx)
634{
635 /*
636 * Configure the DMA register: setup the watermark
637 * and enable DMA request.
638 */
639 writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
640 MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
641 MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
642 MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
643 MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
644}
645
646static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
647{
648 return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
649}
650
651static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
652{
653 /* drain receive buffer */
654 while (mx51_ecspi_rx_available(spi_imx))
655 readl(spi_imx->base + MXC_CSPIRXDATA);
656}
657
658#define MX31_INTREG_TEEN (1 << 0)
659#define MX31_INTREG_RREN (1 << 3)
660
661#define MX31_CSPICTRL_ENABLE (1 << 0)
662#define MX31_CSPICTRL_MASTER (1 << 1)
663#define MX31_CSPICTRL_XCH (1 << 2)
664#define MX31_CSPICTRL_SMC (1 << 3)
665#define MX31_CSPICTRL_POL (1 << 4)
666#define MX31_CSPICTRL_PHA (1 << 5)
667#define MX31_CSPICTRL_SSCTL (1 << 6)
668#define MX31_CSPICTRL_SSPOL (1 << 7)
669#define MX31_CSPICTRL_BC_SHIFT 8
670#define MX35_CSPICTRL_BL_SHIFT 20
671#define MX31_CSPICTRL_CS_SHIFT 24
672#define MX35_CSPICTRL_CS_SHIFT 12
673#define MX31_CSPICTRL_DR_SHIFT 16
674
675#define MX31_CSPI_DMAREG 0x10
676#define MX31_DMAREG_RH_DEN (1<<4)
677#define MX31_DMAREG_TH_DEN (1<<1)
678
679#define MX31_CSPISTATUS 0x14
680#define MX31_STATUS_RR (1 << 3)
681
682#define MX31_CSPI_TESTREG 0x1C
683#define MX31_TEST_LBC (1 << 14)
684
685/* These functions also work for the i.MX35, but be aware that
686 * the i.MX35 has a slightly different register layout for bits
687 * we do not use here.
688 */
689static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
690{
691 unsigned int val = 0;
692
693 if (enable & MXC_INT_TE)
694 val |= MX31_INTREG_TEEN;
695 if (enable & MXC_INT_RR)
696 val |= MX31_INTREG_RREN;
697
698 writel(val, spi_imx->base + MXC_CSPIINT);
699}
700
701static void mx31_trigger(struct spi_imx_data *spi_imx)
702{
703 unsigned int reg;
704
705 reg = readl(spi_imx->base + MXC_CSPICTRL);
706 reg |= MX31_CSPICTRL_XCH;
707 writel(reg, spi_imx->base + MXC_CSPICTRL);
708}
709
710static int mx31_prepare_message(struct spi_imx_data *spi_imx,
711 struct spi_message *msg)
712{
713 return 0;
714}
715
716static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
717 struct spi_device *spi)
718{
719 unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
720 unsigned int clk;
721
722 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
723 MX31_CSPICTRL_DR_SHIFT;
724 spi_imx->spi_bus_clk = clk;
725
726 if (is_imx35_cspi(spi_imx)) {
727 reg |= (spi_imx->bits_per_word - 1) << MX35_CSPICTRL_BL_SHIFT;
728 reg |= MX31_CSPICTRL_SSCTL;
729 } else {
730 reg |= (spi_imx->bits_per_word - 1) << MX31_CSPICTRL_BC_SHIFT;
731 }
732
733 if (spi->mode & SPI_CPHA)
734 reg |= MX31_CSPICTRL_PHA;
735 if (spi->mode & SPI_CPOL)
736 reg |= MX31_CSPICTRL_POL;
737 if (spi->mode & SPI_CS_HIGH)
738 reg |= MX31_CSPICTRL_SSPOL;
739 if (!spi->cs_gpiod)
740 reg |= (spi->chip_select) <<
741 (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
742 MX31_CSPICTRL_CS_SHIFT);
743
744 if (spi_imx->usedma)
745 reg |= MX31_CSPICTRL_SMC;
746
747 writel(reg, spi_imx->base + MXC_CSPICTRL);
748
749 reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
750 if (spi->mode & SPI_LOOP)
751 reg |= MX31_TEST_LBC;
752 else
753 reg &= ~MX31_TEST_LBC;
754 writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
755
756 if (spi_imx->usedma) {
757 /*
758 * configure DMA requests when RXFIFO is half full and
759 * when TXFIFO is half empty
760 */
761 writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
762 spi_imx->base + MX31_CSPI_DMAREG);
763 }
764
765 return 0;
766}
767
768static int mx31_rx_available(struct spi_imx_data *spi_imx)
769{
770 return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
771}
772
773static void mx31_reset(struct spi_imx_data *spi_imx)
774{
775 /* drain receive buffer */
776 while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
777 readl(spi_imx->base + MXC_CSPIRXDATA);
778}
779
780#define MX21_INTREG_RR (1 << 4)
781#define MX21_INTREG_TEEN (1 << 9)
782#define MX21_INTREG_RREN (1 << 13)
783
784#define MX21_CSPICTRL_POL (1 << 5)
785#define MX21_CSPICTRL_PHA (1 << 6)
786#define MX21_CSPICTRL_SSPOL (1 << 8)
787#define MX21_CSPICTRL_XCH (1 << 9)
788#define MX21_CSPICTRL_ENABLE (1 << 10)
789#define MX21_CSPICTRL_MASTER (1 << 11)
790#define MX21_CSPICTRL_DR_SHIFT 14
791#define MX21_CSPICTRL_CS_SHIFT 19
792
793static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
794{
795 unsigned int val = 0;
796
797 if (enable & MXC_INT_TE)
798 val |= MX21_INTREG_TEEN;
799 if (enable & MXC_INT_RR)
800 val |= MX21_INTREG_RREN;
801
802 writel(val, spi_imx->base + MXC_CSPIINT);
803}
804
805static void mx21_trigger(struct spi_imx_data *spi_imx)
806{
807 unsigned int reg;
808
809 reg = readl(spi_imx->base + MXC_CSPICTRL);
810 reg |= MX21_CSPICTRL_XCH;
811 writel(reg, spi_imx->base + MXC_CSPICTRL);
812}
813
814static int mx21_prepare_message(struct spi_imx_data *spi_imx,
815 struct spi_message *msg)
816{
817 return 0;
818}
819
820static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
821 struct spi_device *spi)
822{
823 unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
824 unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
825 unsigned int clk;
826
827 reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, spi_imx->spi_bus_clk, max, &clk)
828 << MX21_CSPICTRL_DR_SHIFT;
829 spi_imx->spi_bus_clk = clk;
830
831 reg |= spi_imx->bits_per_word - 1;
832
833 if (spi->mode & SPI_CPHA)
834 reg |= MX21_CSPICTRL_PHA;
835 if (spi->mode & SPI_CPOL)
836 reg |= MX21_CSPICTRL_POL;
837 if (spi->mode & SPI_CS_HIGH)
838 reg |= MX21_CSPICTRL_SSPOL;
839 if (!spi->cs_gpiod)
840 reg |= spi->chip_select << MX21_CSPICTRL_CS_SHIFT;
841
842 writel(reg, spi_imx->base + MXC_CSPICTRL);
843
844 return 0;
845}
846
847static int mx21_rx_available(struct spi_imx_data *spi_imx)
848{
849 return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
850}
851
852static void mx21_reset(struct spi_imx_data *spi_imx)
853{
854 writel(1, spi_imx->base + MXC_RESET);
855}
856
857#define MX1_INTREG_RR (1 << 3)
858#define MX1_INTREG_TEEN (1 << 8)
859#define MX1_INTREG_RREN (1 << 11)
860
861#define MX1_CSPICTRL_POL (1 << 4)
862#define MX1_CSPICTRL_PHA (1 << 5)
863#define MX1_CSPICTRL_XCH (1 << 8)
864#define MX1_CSPICTRL_ENABLE (1 << 9)
865#define MX1_CSPICTRL_MASTER (1 << 10)
866#define MX1_CSPICTRL_DR_SHIFT 13
867
868static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
869{
870 unsigned int val = 0;
871
872 if (enable & MXC_INT_TE)
873 val |= MX1_INTREG_TEEN;
874 if (enable & MXC_INT_RR)
875 val |= MX1_INTREG_RREN;
876
877 writel(val, spi_imx->base + MXC_CSPIINT);
878}
879
880static void mx1_trigger(struct spi_imx_data *spi_imx)
881{
882 unsigned int reg;
883
884 reg = readl(spi_imx->base + MXC_CSPICTRL);
885 reg |= MX1_CSPICTRL_XCH;
886 writel(reg, spi_imx->base + MXC_CSPICTRL);
887}
888
889static int mx1_prepare_message(struct spi_imx_data *spi_imx,
890 struct spi_message *msg)
891{
892 return 0;
893}
894
895static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
896 struct spi_device *spi)
897{
898 unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
899 unsigned int clk;
900
901 reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
902 MX1_CSPICTRL_DR_SHIFT;
903 spi_imx->spi_bus_clk = clk;
904
905 reg |= spi_imx->bits_per_word - 1;
906
907 if (spi->mode & SPI_CPHA)
908 reg |= MX1_CSPICTRL_PHA;
909 if (spi->mode & SPI_CPOL)
910 reg |= MX1_CSPICTRL_POL;
911
912 writel(reg, spi_imx->base + MXC_CSPICTRL);
913
914 return 0;
915}
916
917static int mx1_rx_available(struct spi_imx_data *spi_imx)
918{
919 return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
920}
921
922static void mx1_reset(struct spi_imx_data *spi_imx)
923{
924 writel(1, spi_imx->base + MXC_RESET);
925}
926
927static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
928 .intctrl = mx1_intctrl,
929 .prepare_message = mx1_prepare_message,
930 .prepare_transfer = mx1_prepare_transfer,
931 .trigger = mx1_trigger,
932 .rx_available = mx1_rx_available,
933 .reset = mx1_reset,
934 .fifo_size = 8,
935 .has_dmamode = false,
936 .dynamic_burst = false,
937 .has_slavemode = false,
938 .devtype = IMX1_CSPI,
939};
940
941static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
942 .intctrl = mx21_intctrl,
943 .prepare_message = mx21_prepare_message,
944 .prepare_transfer = mx21_prepare_transfer,
945 .trigger = mx21_trigger,
946 .rx_available = mx21_rx_available,
947 .reset = mx21_reset,
948 .fifo_size = 8,
949 .has_dmamode = false,
950 .dynamic_burst = false,
951 .has_slavemode = false,
952 .devtype = IMX21_CSPI,
953};
954
955static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
956 /* i.mx27 cspi shares the functions with i.mx21 one */
957 .intctrl = mx21_intctrl,
958 .prepare_message = mx21_prepare_message,
959 .prepare_transfer = mx21_prepare_transfer,
960 .trigger = mx21_trigger,
961 .rx_available = mx21_rx_available,
962 .reset = mx21_reset,
963 .fifo_size = 8,
964 .has_dmamode = false,
965 .dynamic_burst = false,
966 .has_slavemode = false,
967 .devtype = IMX27_CSPI,
968};
969
970static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
971 .intctrl = mx31_intctrl,
972 .prepare_message = mx31_prepare_message,
973 .prepare_transfer = mx31_prepare_transfer,
974 .trigger = mx31_trigger,
975 .rx_available = mx31_rx_available,
976 .reset = mx31_reset,
977 .fifo_size = 8,
978 .has_dmamode = false,
979 .dynamic_burst = false,
980 .has_slavemode = false,
981 .devtype = IMX31_CSPI,
982};
983
984static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
985 /* i.mx35 and later cspi shares the functions with i.mx31 one */
986 .intctrl = mx31_intctrl,
987 .prepare_message = mx31_prepare_message,
988 .prepare_transfer = mx31_prepare_transfer,
989 .trigger = mx31_trigger,
990 .rx_available = mx31_rx_available,
991 .reset = mx31_reset,
992 .fifo_size = 8,
993 .has_dmamode = true,
994 .dynamic_burst = false,
995 .has_slavemode = false,
996 .devtype = IMX35_CSPI,
997};
998
999static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
1000 .intctrl = mx51_ecspi_intctrl,
1001 .prepare_message = mx51_ecspi_prepare_message,
1002 .prepare_transfer = mx51_ecspi_prepare_transfer,
1003 .trigger = mx51_ecspi_trigger,
1004 .rx_available = mx51_ecspi_rx_available,
1005 .reset = mx51_ecspi_reset,
1006 .setup_wml = mx51_setup_wml,
1007 .disable_dma = mx51_disable_dma,
1008 .fifo_size = 64,
1009 .has_dmamode = true,
1010 .dynamic_burst = true,
1011 .has_slavemode = true,
1012 .disable = mx51_ecspi_disable,
1013 .devtype = IMX51_ECSPI,
1014};
1015
1016static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
1017 .intctrl = mx51_ecspi_intctrl,
1018 .prepare_message = mx51_ecspi_prepare_message,
1019 .prepare_transfer = mx51_ecspi_prepare_transfer,
1020 .trigger = mx51_ecspi_trigger,
1021 .rx_available = mx51_ecspi_rx_available,
1022 .disable_dma = mx51_disable_dma,
1023 .reset = mx51_ecspi_reset,
1024 .fifo_size = 64,
1025 .has_dmamode = true,
1026 .has_slavemode = true,
1027 .disable = mx51_ecspi_disable,
1028 .devtype = IMX53_ECSPI,
1029};
1030
1031static const struct of_device_id spi_imx_dt_ids[] = {
1032 { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
1033 { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
1034 { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
1035 { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
1036 { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
1037 { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
1038 { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
1039 { /* sentinel */ }
1040};
1041MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
1042
1043static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
1044{
1045 u32 ctrl;
1046
1047 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
1048 ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
1049 ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
1050 writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
1051}
1052
1053static void spi_imx_push(struct spi_imx_data *spi_imx)
1054{
1055 unsigned int burst_len, fifo_words;
1056
1057 if (spi_imx->dynamic_burst)
1058 fifo_words = 4;
1059 else
1060 fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word);
1061 /*
1062 * Reload the FIFO when the remaining bytes to be transferred in the
1063 * current burst is 0. This only applies when bits_per_word is a
1064 * multiple of 8.
1065 */
1066 if (!spi_imx->remainder) {
1067 if (spi_imx->dynamic_burst) {
1068
1069 /* We need to deal unaligned data first */
1070 burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
1071
1072 if (!burst_len)
1073 burst_len = MX51_ECSPI_CTRL_MAX_BURST;
1074
1075 spi_imx_set_burst_len(spi_imx, burst_len * 8);
1076
1077 spi_imx->remainder = burst_len;
1078 } else {
1079 spi_imx->remainder = fifo_words;
1080 }
1081 }
1082
1083 while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
1084 if (!spi_imx->count)
1085 break;
1086 if (spi_imx->dynamic_burst &&
1087 spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
1088 fifo_words))
1089 break;
1090 spi_imx->tx(spi_imx);
1091 spi_imx->txfifo++;
1092 }
1093
1094 if (!spi_imx->slave_mode)
1095 spi_imx->devtype_data->trigger(spi_imx);
1096}
1097
1098static irqreturn_t spi_imx_isr(int irq, void *dev_id)
1099{
1100 struct spi_imx_data *spi_imx = dev_id;
1101
1102 while (spi_imx->txfifo &&
1103 spi_imx->devtype_data->rx_available(spi_imx)) {
1104 spi_imx->rx(spi_imx);
1105 spi_imx->txfifo--;
1106 }
1107
1108 if (spi_imx->count) {
1109 spi_imx_push(spi_imx);
1110 return IRQ_HANDLED;
1111 }
1112
1113 if (spi_imx->txfifo) {
1114 /* No data left to push, but still waiting for rx data,
1115 * enable receive data available interrupt.
1116 */
1117 spi_imx->devtype_data->intctrl(
1118 spi_imx, MXC_INT_RR);
1119 return IRQ_HANDLED;
1120 }
1121
1122 spi_imx->devtype_data->intctrl(spi_imx, 0);
1123 complete(&spi_imx->xfer_done);
1124
1125 return IRQ_HANDLED;
1126}
1127
1128static int spi_imx_dma_configure(struct spi_master *master)
1129{
1130 int ret;
1131 enum dma_slave_buswidth buswidth;
1132 struct dma_slave_config rx = {}, tx = {};
1133 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1134
1135 switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
1136 case 4:
1137 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
1138 break;
1139 case 2:
1140 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
1141 break;
1142 case 1:
1143 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
1144 break;
1145 default:
1146 return -EINVAL;
1147 }
1148
1149 tx.direction = DMA_MEM_TO_DEV;
1150 tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
1151 tx.dst_addr_width = buswidth;
1152 tx.dst_maxburst = spi_imx->wml;
1153 ret = dmaengine_slave_config(master->dma_tx, &tx);
1154 if (ret) {
1155 dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
1156 return ret;
1157 }
1158
1159 rx.direction = DMA_DEV_TO_MEM;
1160 rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
1161 rx.src_addr_width = buswidth;
1162 rx.src_maxburst = spi_imx->wml;
1163 ret = dmaengine_slave_config(master->dma_rx, &rx);
1164 if (ret) {
1165 dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
1166 return ret;
1167 }
1168
1169 return 0;
1170}
1171
1172static int spi_imx_setupxfer(struct spi_device *spi,
1173 struct spi_transfer *t)
1174{
1175 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1176
1177 if (!t)
1178 return 0;
1179
1180 if (!t->speed_hz) {
1181 if (!spi->max_speed_hz) {
1182 dev_err(&spi->dev, "no speed_hz provided!\n");
1183 return -EINVAL;
1184 }
1185 dev_dbg(&spi->dev, "using spi->max_speed_hz!\n");
1186 spi_imx->spi_bus_clk = spi->max_speed_hz;
1187 } else
1188 spi_imx->spi_bus_clk = t->speed_hz;
1189
1190 spi_imx->bits_per_word = t->bits_per_word;
1191
1192 /*
1193 * Initialize the functions for transfer. To transfer non byte-aligned
1194 * words, we have to use multiple word-size bursts, we can't use
1195 * dynamic_burst in that case.
1196 */
1197 if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
1198 (spi_imx->bits_per_word == 8 ||
1199 spi_imx->bits_per_word == 16 ||
1200 spi_imx->bits_per_word == 32)) {
1201
1202 spi_imx->rx = spi_imx_buf_rx_swap;
1203 spi_imx->tx = spi_imx_buf_tx_swap;
1204 spi_imx->dynamic_burst = 1;
1205
1206 } else {
1207 if (spi_imx->bits_per_word <= 8) {
1208 spi_imx->rx = spi_imx_buf_rx_u8;
1209 spi_imx->tx = spi_imx_buf_tx_u8;
1210 } else if (spi_imx->bits_per_word <= 16) {
1211 spi_imx->rx = spi_imx_buf_rx_u16;
1212 spi_imx->tx = spi_imx_buf_tx_u16;
1213 } else {
1214 spi_imx->rx = spi_imx_buf_rx_u32;
1215 spi_imx->tx = spi_imx_buf_tx_u32;
1216 }
1217 spi_imx->dynamic_burst = 0;
1218 }
1219
1220 if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
1221 spi_imx->usedma = true;
1222 else
1223 spi_imx->usedma = false;
1224
1225 if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) {
1226 spi_imx->rx = mx53_ecspi_rx_slave;
1227 spi_imx->tx = mx53_ecspi_tx_slave;
1228 spi_imx->slave_burst = t->len;
1229 }
1230
1231 spi_imx->devtype_data->prepare_transfer(spi_imx, spi);
1232
1233 return 0;
1234}
1235
1236static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
1237{
1238 struct spi_master *master = spi_imx->bitbang.master;
1239
1240 if (master->dma_rx) {
1241 dma_release_channel(master->dma_rx);
1242 master->dma_rx = NULL;
1243 }
1244
1245 if (master->dma_tx) {
1246 dma_release_channel(master->dma_tx);
1247 master->dma_tx = NULL;
1248 }
1249}
1250
1251static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
1252 struct spi_master *master)
1253{
1254 int ret;
1255
1256 /* use pio mode for i.mx6dl chip TKT238285 */
1257 if (of_machine_is_compatible("fsl,imx6dl"))
1258 return 0;
1259
1260 spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
1261
1262 /* Prepare for TX DMA: */
1263 master->dma_tx = dma_request_chan(dev, "tx");
1264 if (IS_ERR(master->dma_tx)) {
1265 ret = PTR_ERR(master->dma_tx);
1266 dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
1267 master->dma_tx = NULL;
1268 goto err;
1269 }
1270
1271 /* Prepare for RX : */
1272 master->dma_rx = dma_request_chan(dev, "rx");
1273 if (IS_ERR(master->dma_rx)) {
1274 ret = PTR_ERR(master->dma_rx);
1275 dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
1276 master->dma_rx = NULL;
1277 goto err;
1278 }
1279
1280 init_completion(&spi_imx->dma_rx_completion);
1281 init_completion(&spi_imx->dma_tx_completion);
1282 master->can_dma = spi_imx_can_dma;
1283 master->max_dma_len = MAX_SDMA_BD_BYTES;
1284 spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
1285 SPI_MASTER_MUST_TX;
1286
1287 return 0;
1288err:
1289 spi_imx_sdma_exit(spi_imx);
1290 return ret;
1291}
1292
1293static void spi_imx_dma_rx_callback(void *cookie)
1294{
1295 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1296
1297 complete(&spi_imx->dma_rx_completion);
1298}
1299
1300static void spi_imx_dma_tx_callback(void *cookie)
1301{
1302 struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1303
1304 complete(&spi_imx->dma_tx_completion);
1305}
1306
1307static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1308{
1309 unsigned long timeout = 0;
1310
1311 /* Time with actual data transfer and CS change delay related to HW */
1312 timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1313
1314 /* Add extra second for scheduler related activities */
1315 timeout += 1;
1316
1317 /* Double calculated timeout */
1318 return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1319}
1320
1321static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1322 struct spi_transfer *transfer)
1323{
1324 struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1325 unsigned long transfer_timeout;
1326 unsigned long timeout;
1327 struct spi_master *master = spi_imx->bitbang.master;
1328 struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1329 struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
1330 unsigned int bytes_per_word, i;
1331 int ret;
1332
1333 /* Get the right burst length from the last sg to ensure no tail data */
1334 bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
1335 for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
1336 if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
1337 break;
1338 }
1339 /* Use 1 as wml in case no available burst length got */
1340 if (i == 0)
1341 i = 1;
1342
1343 spi_imx->wml = i;
1344
1345 ret = spi_imx_dma_configure(master);
1346 if (ret)
1347 goto dma_failure_no_start;
1348
1349 if (!spi_imx->devtype_data->setup_wml) {
1350 dev_err(spi_imx->dev, "No setup_wml()?\n");
1351 ret = -EINVAL;
1352 goto dma_failure_no_start;
1353 }
1354 spi_imx->devtype_data->setup_wml(spi_imx);
1355
1356 /*
1357 * The TX DMA setup starts the transfer, so make sure RX is configured
1358 * before TX.
1359 */
1360 desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
1361 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1362 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1363 if (!desc_rx) {
1364 ret = -EINVAL;
1365 goto dma_failure_no_start;
1366 }
1367
1368 desc_rx->callback = spi_imx_dma_rx_callback;
1369 desc_rx->callback_param = (void *)spi_imx;
1370 dmaengine_submit(desc_rx);
1371 reinit_completion(&spi_imx->dma_rx_completion);
1372 dma_async_issue_pending(master->dma_rx);
1373
1374 desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
1375 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1376 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1377 if (!desc_tx) {
1378 dmaengine_terminate_all(master->dma_tx);
1379 dmaengine_terminate_all(master->dma_rx);
1380 return -EINVAL;
1381 }
1382
1383 desc_tx->callback = spi_imx_dma_tx_callback;
1384 desc_tx->callback_param = (void *)spi_imx;
1385 dmaengine_submit(desc_tx);
1386 reinit_completion(&spi_imx->dma_tx_completion);
1387 dma_async_issue_pending(master->dma_tx);
1388
1389 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1390
1391 /* Wait SDMA to finish the data transfer.*/
1392 timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1393 transfer_timeout);
1394 if (!timeout) {
1395 dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1396 dmaengine_terminate_all(master->dma_tx);
1397 dmaengine_terminate_all(master->dma_rx);
1398 return -ETIMEDOUT;
1399 }
1400
1401 timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1402 transfer_timeout);
1403 if (!timeout) {
1404 dev_err(&master->dev, "I/O Error in DMA RX\n");
1405 spi_imx->devtype_data->reset(spi_imx);
1406 dmaengine_terminate_all(master->dma_rx);
1407 return -ETIMEDOUT;
1408 }
1409
1410 return transfer->len;
1411/* fallback to pio */
1412dma_failure_no_start:
1413 transfer->error |= SPI_TRANS_FAIL_NO_START;
1414 return ret;
1415}
1416
1417static int spi_imx_pio_transfer(struct spi_device *spi,
1418 struct spi_transfer *transfer)
1419{
1420 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1421 unsigned long transfer_timeout;
1422 unsigned long timeout;
1423
1424 spi_imx->tx_buf = transfer->tx_buf;
1425 spi_imx->rx_buf = transfer->rx_buf;
1426 spi_imx->count = transfer->len;
1427 spi_imx->txfifo = 0;
1428 spi_imx->remainder = 0;
1429
1430 reinit_completion(&spi_imx->xfer_done);
1431
1432 spi_imx_push(spi_imx);
1433
1434 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1435
1436 transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1437
1438 timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1439 transfer_timeout);
1440 if (!timeout) {
1441 dev_err(&spi->dev, "I/O Error in PIO\n");
1442 spi_imx->devtype_data->reset(spi_imx);
1443 return -ETIMEDOUT;
1444 }
1445
1446 return transfer->len;
1447}
1448
1449static int spi_imx_pio_transfer_slave(struct spi_device *spi,
1450 struct spi_transfer *transfer)
1451{
1452 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1453 int ret = transfer->len;
1454
1455 if (is_imx53_ecspi(spi_imx) &&
1456 transfer->len > MX53_MAX_TRANSFER_BYTES) {
1457 dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
1458 MX53_MAX_TRANSFER_BYTES);
1459 return -EMSGSIZE;
1460 }
1461
1462 spi_imx->tx_buf = transfer->tx_buf;
1463 spi_imx->rx_buf = transfer->rx_buf;
1464 spi_imx->count = transfer->len;
1465 spi_imx->txfifo = 0;
1466 spi_imx->remainder = 0;
1467
1468 reinit_completion(&spi_imx->xfer_done);
1469 spi_imx->slave_aborted = false;
1470
1471 spi_imx_push(spi_imx);
1472
1473 spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE | MXC_INT_RDR);
1474
1475 if (wait_for_completion_interruptible(&spi_imx->xfer_done) ||
1476 spi_imx->slave_aborted) {
1477 dev_dbg(&spi->dev, "interrupted\n");
1478 ret = -EINTR;
1479 }
1480
1481 /* ecspi has a HW issue when works in Slave mode,
1482 * after 64 words writtern to TXFIFO, even TXFIFO becomes empty,
1483 * ECSPI_TXDATA keeps shift out the last word data,
1484 * so we have to disable ECSPI when in slave mode after the
1485 * transfer completes
1486 */
1487 if (spi_imx->devtype_data->disable)
1488 spi_imx->devtype_data->disable(spi_imx);
1489
1490 return ret;
1491}
1492
1493static int spi_imx_transfer(struct spi_device *spi,
1494 struct spi_transfer *transfer)
1495{
1496 struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1497
1498 transfer->effective_speed_hz = spi_imx->spi_bus_clk;
1499
1500 /* flush rxfifo before transfer */
1501 while (spi_imx->devtype_data->rx_available(spi_imx))
1502 readl(spi_imx->base + MXC_CSPIRXDATA);
1503
1504 if (spi_imx->slave_mode)
1505 return spi_imx_pio_transfer_slave(spi, transfer);
1506
1507 if (spi_imx->usedma)
1508 return spi_imx_dma_transfer(spi_imx, transfer);
1509
1510 return spi_imx_pio_transfer(spi, transfer);
1511}
1512
1513static int spi_imx_setup(struct spi_device *spi)
1514{
1515 dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1516 spi->mode, spi->bits_per_word, spi->max_speed_hz);
1517
1518 return 0;
1519}
1520
1521static void spi_imx_cleanup(struct spi_device *spi)
1522{
1523}
1524
1525static int
1526spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg)
1527{
1528 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1529 int ret;
1530
1531 ret = pm_runtime_get_sync(spi_imx->dev);
1532 if (ret < 0) {
1533 pm_runtime_put_noidle(spi_imx->dev);
1534 dev_err(spi_imx->dev, "failed to enable clock\n");
1535 return ret;
1536 }
1537
1538 ret = spi_imx->devtype_data->prepare_message(spi_imx, msg);
1539 if (ret) {
1540 pm_runtime_mark_last_busy(spi_imx->dev);
1541 pm_runtime_put_autosuspend(spi_imx->dev);
1542 }
1543
1544 return ret;
1545}
1546
1547static int
1548spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg)
1549{
1550 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1551
1552 pm_runtime_mark_last_busy(spi_imx->dev);
1553 pm_runtime_put_autosuspend(spi_imx->dev);
1554 return 0;
1555}
1556
1557static int spi_imx_slave_abort(struct spi_master *master)
1558{
1559 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1560
1561 spi_imx->slave_aborted = true;
1562 complete(&spi_imx->xfer_done);
1563
1564 return 0;
1565}
1566
1567static int spi_imx_probe(struct platform_device *pdev)
1568{
1569 struct device_node *np = pdev->dev.of_node;
1570 struct spi_master *master;
1571 struct spi_imx_data *spi_imx;
1572 struct resource *res;
1573 int ret, irq, spi_drctl;
1574 const struct spi_imx_devtype_data *devtype_data =
1575 of_device_get_match_data(&pdev->dev);
1576 bool slave_mode;
1577 u32 val;
1578
1579 slave_mode = devtype_data->has_slavemode &&
1580 of_property_read_bool(np, "spi-slave");
1581 if (slave_mode)
1582 master = spi_alloc_slave(&pdev->dev,
1583 sizeof(struct spi_imx_data));
1584 else
1585 master = spi_alloc_master(&pdev->dev,
1586 sizeof(struct spi_imx_data));
1587 if (!master)
1588 return -ENOMEM;
1589
1590 ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
1591 if ((ret < 0) || (spi_drctl >= 0x3)) {
1592 /* '11' is reserved */
1593 spi_drctl = 0;
1594 }
1595
1596 platform_set_drvdata(pdev, master);
1597
1598 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1599 master->bus_num = np ? -1 : pdev->id;
1600 master->use_gpio_descriptors = true;
1601
1602 spi_imx = spi_master_get_devdata(master);
1603 spi_imx->bitbang.master = master;
1604 spi_imx->dev = &pdev->dev;
1605 spi_imx->slave_mode = slave_mode;
1606
1607 spi_imx->devtype_data = devtype_data;
1608
1609 /*
1610 * Get number of chip selects from device properties. This can be
1611 * coming from device tree or boardfiles, if it is not defined,
1612 * a default value of 3 chip selects will be used, as all the legacy
1613 * board files have <= 3 chip selects.
1614 */
1615 if (!device_property_read_u32(&pdev->dev, "num-cs", &val))
1616 master->num_chipselect = val;
1617 else
1618 master->num_chipselect = 3;
1619
1620 spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
1621 spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
1622 spi_imx->bitbang.master->setup = spi_imx_setup;
1623 spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
1624 spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
1625 spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
1626 spi_imx->bitbang.master->slave_abort = spi_imx_slave_abort;
1627 spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
1628 | SPI_NO_CS;
1629 if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
1630 is_imx53_ecspi(spi_imx))
1631 spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
1632
1633 spi_imx->spi_drctl = spi_drctl;
1634
1635 init_completion(&spi_imx->xfer_done);
1636
1637 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1638 spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
1639 if (IS_ERR(spi_imx->base)) {
1640 ret = PTR_ERR(spi_imx->base);
1641 goto out_master_put;
1642 }
1643 spi_imx->base_phys = res->start;
1644
1645 irq = platform_get_irq(pdev, 0);
1646 if (irq < 0) {
1647 ret = irq;
1648 goto out_master_put;
1649 }
1650
1651 ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1652 dev_name(&pdev->dev), spi_imx);
1653 if (ret) {
1654 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1655 goto out_master_put;
1656 }
1657
1658 spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1659 if (IS_ERR(spi_imx->clk_ipg)) {
1660 ret = PTR_ERR(spi_imx->clk_ipg);
1661 goto out_master_put;
1662 }
1663
1664 spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1665 if (IS_ERR(spi_imx->clk_per)) {
1666 ret = PTR_ERR(spi_imx->clk_per);
1667 goto out_master_put;
1668 }
1669
1670 ret = clk_prepare_enable(spi_imx->clk_per);
1671 if (ret)
1672 goto out_master_put;
1673
1674 ret = clk_prepare_enable(spi_imx->clk_ipg);
1675 if (ret)
1676 goto out_put_per;
1677
1678 pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
1679 pm_runtime_use_autosuspend(spi_imx->dev);
1680 pm_runtime_get_noresume(spi_imx->dev);
1681 pm_runtime_set_active(spi_imx->dev);
1682 pm_runtime_enable(spi_imx->dev);
1683
1684 spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1685 /*
1686 * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1687 * if validated on other chips.
1688 */
1689 if (spi_imx->devtype_data->has_dmamode) {
1690 ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
1691 if (ret == -EPROBE_DEFER)
1692 goto out_runtime_pm_put;
1693
1694 if (ret < 0)
1695 dev_dbg(&pdev->dev, "dma setup error %d, use pio\n",
1696 ret);
1697 }
1698
1699 spi_imx->devtype_data->reset(spi_imx);
1700
1701 spi_imx->devtype_data->intctrl(spi_imx, 0);
1702
1703 master->dev.of_node = pdev->dev.of_node;
1704 ret = spi_bitbang_start(&spi_imx->bitbang);
1705 if (ret) {
1706 dev_err_probe(&pdev->dev, ret, "bitbang start failed\n");
1707 goto out_bitbang_start;
1708 }
1709
1710 pm_runtime_mark_last_busy(spi_imx->dev);
1711 pm_runtime_put_autosuspend(spi_imx->dev);
1712
1713 return ret;
1714
1715out_bitbang_start:
1716 if (spi_imx->devtype_data->has_dmamode)
1717 spi_imx_sdma_exit(spi_imx);
1718out_runtime_pm_put:
1719 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1720 pm_runtime_set_suspended(&pdev->dev);
1721 pm_runtime_disable(spi_imx->dev);
1722
1723 clk_disable_unprepare(spi_imx->clk_ipg);
1724out_put_per:
1725 clk_disable_unprepare(spi_imx->clk_per);
1726out_master_put:
1727 spi_master_put(master);
1728
1729 return ret;
1730}
1731
1732static int spi_imx_remove(struct platform_device *pdev)
1733{
1734 struct spi_master *master = platform_get_drvdata(pdev);
1735 struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1736 int ret;
1737
1738 spi_bitbang_stop(&spi_imx->bitbang);
1739
1740 ret = pm_runtime_get_sync(spi_imx->dev);
1741 if (ret < 0) {
1742 pm_runtime_put_noidle(spi_imx->dev);
1743 dev_err(spi_imx->dev, "failed to enable clock\n");
1744 return ret;
1745 }
1746
1747 writel(0, spi_imx->base + MXC_CSPICTRL);
1748
1749 pm_runtime_dont_use_autosuspend(spi_imx->dev);
1750 pm_runtime_put_sync(spi_imx->dev);
1751 pm_runtime_disable(spi_imx->dev);
1752
1753 spi_imx_sdma_exit(spi_imx);
1754 spi_master_put(master);
1755
1756 return 0;
1757}
1758
1759static int __maybe_unused spi_imx_runtime_resume(struct device *dev)
1760{
1761 struct spi_master *master = dev_get_drvdata(dev);
1762 struct spi_imx_data *spi_imx;
1763 int ret;
1764
1765 spi_imx = spi_master_get_devdata(master);
1766
1767 ret = clk_prepare_enable(spi_imx->clk_per);
1768 if (ret)
1769 return ret;
1770
1771 ret = clk_prepare_enable(spi_imx->clk_ipg);
1772 if (ret) {
1773 clk_disable_unprepare(spi_imx->clk_per);
1774 return ret;
1775 }
1776
1777 return 0;
1778}
1779
1780static int __maybe_unused spi_imx_runtime_suspend(struct device *dev)
1781{
1782 struct spi_master *master = dev_get_drvdata(dev);
1783 struct spi_imx_data *spi_imx;
1784
1785 spi_imx = spi_master_get_devdata(master);
1786
1787 clk_disable_unprepare(spi_imx->clk_per);
1788 clk_disable_unprepare(spi_imx->clk_ipg);
1789
1790 return 0;
1791}
1792
1793static int __maybe_unused spi_imx_suspend(struct device *dev)
1794{
1795 pinctrl_pm_select_sleep_state(dev);
1796 return 0;
1797}
1798
1799static int __maybe_unused spi_imx_resume(struct device *dev)
1800{
1801 pinctrl_pm_select_default_state(dev);
1802 return 0;
1803}
1804
1805static const struct dev_pm_ops imx_spi_pm = {
1806 SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend,
1807 spi_imx_runtime_resume, NULL)
1808 SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume)
1809};
1810
1811static struct platform_driver spi_imx_driver = {
1812 .driver = {
1813 .name = DRIVER_NAME,
1814 .of_match_table = spi_imx_dt_ids,
1815 .pm = &imx_spi_pm,
1816 },
1817 .probe = spi_imx_probe,
1818 .remove = spi_imx_remove,
1819};
1820module_platform_driver(spi_imx_driver);
1821
1822MODULE_DESCRIPTION("i.MX SPI Controller driver");
1823MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1824MODULE_LICENSE("GPL");
1825MODULE_ALIAS("platform:" DRIVER_NAME);