Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright Linus Torvalds 1999
4 * (C) Copyright Johannes Erdfelt 1999-2001
5 * (C) Copyright Andreas Gal 1999
6 * (C) Copyright Gregory P. Smith 1999
7 * (C) Copyright Deti Fliegl 1999
8 * (C) Copyright Randy Dunlap 2000
9 * (C) Copyright David Brownell 2000-2002
10 */
11
12#include <linux/bcd.h>
13#include <linux/module.h>
14#include <linux/version.h>
15#include <linux/kernel.h>
16#include <linux/sched/task_stack.h>
17#include <linux/slab.h>
18#include <linux/completion.h>
19#include <linux/utsname.h>
20#include <linux/mm.h>
21#include <asm/io.h>
22#include <linux/device.h>
23#include <linux/dma-mapping.h>
24#include <linux/mutex.h>
25#include <asm/irq.h>
26#include <asm/byteorder.h>
27#include <linux/unaligned.h>
28#include <linux/platform_device.h>
29#include <linux/workqueue.h>
30#include <linux/pm_runtime.h>
31#include <linux/types.h>
32#include <linux/genalloc.h>
33#include <linux/io.h>
34#include <linux/kcov.h>
35
36#include <linux/phy/phy.h>
37#include <linux/usb.h>
38#include <linux/usb/hcd.h>
39#include <linux/usb/otg.h>
40
41#include "usb.h"
42#include "phy.h"
43
44
45/*-------------------------------------------------------------------------*/
46
47/*
48 * USB Host Controller Driver framework
49 *
50 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
51 * HCD-specific behaviors/bugs.
52 *
53 * This does error checks, tracks devices and urbs, and delegates to a
54 * "hc_driver" only for code (and data) that really needs to know about
55 * hardware differences. That includes root hub registers, i/o queues,
56 * and so on ... but as little else as possible.
57 *
58 * Shared code includes most of the "root hub" code (these are emulated,
59 * though each HC's hardware works differently) and PCI glue, plus request
60 * tracking overhead. The HCD code should only block on spinlocks or on
61 * hardware handshaking; blocking on software events (such as other kernel
62 * threads releasing resources, or completing actions) is all generic.
63 *
64 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
65 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
66 * only by the hub driver ... and that neither should be seen or used by
67 * usb client device drivers.
68 *
69 * Contributors of ideas or unattributed patches include: David Brownell,
70 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
71 *
72 * HISTORY:
73 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
74 * associated cleanup. "usb_hcd" still != "usb_bus".
75 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
76 */
77
78/*-------------------------------------------------------------------------*/
79
80/* Keep track of which host controller drivers are loaded */
81unsigned long usb_hcds_loaded;
82EXPORT_SYMBOL_GPL(usb_hcds_loaded);
83
84/* host controllers we manage */
85DEFINE_IDR (usb_bus_idr);
86EXPORT_SYMBOL_GPL (usb_bus_idr);
87
88/* used when allocating bus numbers */
89#define USB_MAXBUS 64
90
91/* used when updating list of hcds */
92DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
93EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
94
95/* used for controlling access to virtual root hubs */
96static DEFINE_SPINLOCK(hcd_root_hub_lock);
97
98/* used when updating an endpoint's URB list */
99static DEFINE_SPINLOCK(hcd_urb_list_lock);
100
101/* used to protect against unlinking URBs after the device is gone */
102static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
103
104/* wait queue for synchronous unlinks */
105DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
106
107/*-------------------------------------------------------------------------*/
108
109/*
110 * Sharable chunks of root hub code.
111 */
112
113/*-------------------------------------------------------------------------*/
114#define KERNEL_REL bin2bcd(LINUX_VERSION_MAJOR)
115#define KERNEL_VER bin2bcd(LINUX_VERSION_PATCHLEVEL)
116
117/* usb 3.1 root hub device descriptor */
118static const u8 usb31_rh_dev_descriptor[18] = {
119 0x12, /* __u8 bLength; */
120 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
121 0x10, 0x03, /* __le16 bcdUSB; v3.1 */
122
123 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
124 0x00, /* __u8 bDeviceSubClass; */
125 0x03, /* __u8 bDeviceProtocol; USB 3 hub */
126 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
127
128 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
129 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
130 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
131
132 0x03, /* __u8 iManufacturer; */
133 0x02, /* __u8 iProduct; */
134 0x01, /* __u8 iSerialNumber; */
135 0x01 /* __u8 bNumConfigurations; */
136};
137
138/* usb 3.0 root hub device descriptor */
139static const u8 usb3_rh_dev_descriptor[18] = {
140 0x12, /* __u8 bLength; */
141 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
142 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
143
144 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
145 0x00, /* __u8 bDeviceSubClass; */
146 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
147 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
148
149 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
150 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
151 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
152
153 0x03, /* __u8 iManufacturer; */
154 0x02, /* __u8 iProduct; */
155 0x01, /* __u8 iSerialNumber; */
156 0x01 /* __u8 bNumConfigurations; */
157};
158
159/* usb 2.0 root hub device descriptor */
160static const u8 usb2_rh_dev_descriptor[18] = {
161 0x12, /* __u8 bLength; */
162 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
163 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
164
165 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
166 0x00, /* __u8 bDeviceSubClass; */
167 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
168 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
169
170 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
171 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
172 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
173
174 0x03, /* __u8 iManufacturer; */
175 0x02, /* __u8 iProduct; */
176 0x01, /* __u8 iSerialNumber; */
177 0x01 /* __u8 bNumConfigurations; */
178};
179
180/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
181
182/* usb 1.1 root hub device descriptor */
183static const u8 usb11_rh_dev_descriptor[18] = {
184 0x12, /* __u8 bLength; */
185 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
186 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
187
188 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
189 0x00, /* __u8 bDeviceSubClass; */
190 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
191 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
192
193 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
194 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
195 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
196
197 0x03, /* __u8 iManufacturer; */
198 0x02, /* __u8 iProduct; */
199 0x01, /* __u8 iSerialNumber; */
200 0x01 /* __u8 bNumConfigurations; */
201};
202
203
204/*-------------------------------------------------------------------------*/
205
206/* Configuration descriptors for our root hubs */
207
208static const u8 fs_rh_config_descriptor[] = {
209
210 /* one configuration */
211 0x09, /* __u8 bLength; */
212 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
213 0x19, 0x00, /* __le16 wTotalLength; */
214 0x01, /* __u8 bNumInterfaces; (1) */
215 0x01, /* __u8 bConfigurationValue; */
216 0x00, /* __u8 iConfiguration; */
217 0xc0, /* __u8 bmAttributes;
218 Bit 7: must be set,
219 6: Self-powered,
220 5: Remote wakeup,
221 4..0: resvd */
222 0x00, /* __u8 MaxPower; */
223
224 /* USB 1.1:
225 * USB 2.0, single TT organization (mandatory):
226 * one interface, protocol 0
227 *
228 * USB 2.0, multiple TT organization (optional):
229 * two interfaces, protocols 1 (like single TT)
230 * and 2 (multiple TT mode) ... config is
231 * sometimes settable
232 * NOT IMPLEMENTED
233 */
234
235 /* one interface */
236 0x09, /* __u8 if_bLength; */
237 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
238 0x00, /* __u8 if_bInterfaceNumber; */
239 0x00, /* __u8 if_bAlternateSetting; */
240 0x01, /* __u8 if_bNumEndpoints; */
241 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
242 0x00, /* __u8 if_bInterfaceSubClass; */
243 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
244 0x00, /* __u8 if_iInterface; */
245
246 /* one endpoint (status change endpoint) */
247 0x07, /* __u8 ep_bLength; */
248 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
249 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
250 0x03, /* __u8 ep_bmAttributes; Interrupt */
251 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
252 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
253};
254
255static const u8 hs_rh_config_descriptor[] = {
256
257 /* one configuration */
258 0x09, /* __u8 bLength; */
259 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
260 0x19, 0x00, /* __le16 wTotalLength; */
261 0x01, /* __u8 bNumInterfaces; (1) */
262 0x01, /* __u8 bConfigurationValue; */
263 0x00, /* __u8 iConfiguration; */
264 0xc0, /* __u8 bmAttributes;
265 Bit 7: must be set,
266 6: Self-powered,
267 5: Remote wakeup,
268 4..0: resvd */
269 0x00, /* __u8 MaxPower; */
270
271 /* USB 1.1:
272 * USB 2.0, single TT organization (mandatory):
273 * one interface, protocol 0
274 *
275 * USB 2.0, multiple TT organization (optional):
276 * two interfaces, protocols 1 (like single TT)
277 * and 2 (multiple TT mode) ... config is
278 * sometimes settable
279 * NOT IMPLEMENTED
280 */
281
282 /* one interface */
283 0x09, /* __u8 if_bLength; */
284 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
285 0x00, /* __u8 if_bInterfaceNumber; */
286 0x00, /* __u8 if_bAlternateSetting; */
287 0x01, /* __u8 if_bNumEndpoints; */
288 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
289 0x00, /* __u8 if_bInterfaceSubClass; */
290 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
291 0x00, /* __u8 if_iInterface; */
292
293 /* one endpoint (status change endpoint) */
294 0x07, /* __u8 ep_bLength; */
295 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
296 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
297 0x03, /* __u8 ep_bmAttributes; Interrupt */
298 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
299 * see hub.c:hub_configure() for details. */
300 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
301 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
302};
303
304static const u8 ss_rh_config_descriptor[] = {
305 /* one configuration */
306 0x09, /* __u8 bLength; */
307 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
308 0x1f, 0x00, /* __le16 wTotalLength; */
309 0x01, /* __u8 bNumInterfaces; (1) */
310 0x01, /* __u8 bConfigurationValue; */
311 0x00, /* __u8 iConfiguration; */
312 0xc0, /* __u8 bmAttributes;
313 Bit 7: must be set,
314 6: Self-powered,
315 5: Remote wakeup,
316 4..0: resvd */
317 0x00, /* __u8 MaxPower; */
318
319 /* one interface */
320 0x09, /* __u8 if_bLength; */
321 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
322 0x00, /* __u8 if_bInterfaceNumber; */
323 0x00, /* __u8 if_bAlternateSetting; */
324 0x01, /* __u8 if_bNumEndpoints; */
325 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
326 0x00, /* __u8 if_bInterfaceSubClass; */
327 0x00, /* __u8 if_bInterfaceProtocol; */
328 0x00, /* __u8 if_iInterface; */
329
330 /* one endpoint (status change endpoint) */
331 0x07, /* __u8 ep_bLength; */
332 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
333 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
334 0x03, /* __u8 ep_bmAttributes; Interrupt */
335 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
336 * see hub.c:hub_configure() for details. */
337 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
338 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
339
340 /* one SuperSpeed endpoint companion descriptor */
341 0x06, /* __u8 ss_bLength */
342 USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
343 /* Companion */
344 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
345 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
346 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
347};
348
349/* authorized_default behaviour:
350 * -1 is authorized for all devices (leftover from wireless USB)
351 * 0 is unauthorized for all devices
352 * 1 is authorized for all devices
353 * 2 is authorized for internal devices
354 */
355#define USB_AUTHORIZE_WIRED -1
356#define USB_AUTHORIZE_NONE 0
357#define USB_AUTHORIZE_ALL 1
358#define USB_AUTHORIZE_INTERNAL 2
359
360static int authorized_default = CONFIG_USB_DEFAULT_AUTHORIZATION_MODE;
361module_param(authorized_default, int, S_IRUGO|S_IWUSR);
362MODULE_PARM_DESC(authorized_default,
363 "Default USB device authorization: 0 is not authorized, 1 is authorized (default), 2 is authorized for internal devices, -1 is authorized (same as 1)");
364/*-------------------------------------------------------------------------*/
365
366/**
367 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
368 * @s: Null-terminated ASCII (actually ISO-8859-1) string
369 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
370 * @len: Length (in bytes; may be odd) of descriptor buffer.
371 *
372 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
373 * whichever is less.
374 *
375 * Note:
376 * USB String descriptors can contain at most 126 characters; input
377 * strings longer than that are truncated.
378 */
379static unsigned
380ascii2desc(char const *s, u8 *buf, unsigned len)
381{
382 unsigned n, t = 2 + 2*strlen(s);
383
384 if (t > 254)
385 t = 254; /* Longest possible UTF string descriptor */
386 if (len > t)
387 len = t;
388
389 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
390
391 n = len;
392 while (n--) {
393 *buf++ = t;
394 if (!n--)
395 break;
396 *buf++ = t >> 8;
397 t = (unsigned char)*s++;
398 }
399 return len;
400}
401
402/**
403 * rh_string() - provides string descriptors for root hub
404 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
405 * @hcd: the host controller for this root hub
406 * @data: buffer for output packet
407 * @len: length of the provided buffer
408 *
409 * Produces either a manufacturer, product or serial number string for the
410 * virtual root hub device.
411 *
412 * Return: The number of bytes filled in: the length of the descriptor or
413 * of the provided buffer, whichever is less.
414 */
415static unsigned
416rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
417{
418 char buf[100];
419 char const *s;
420 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
421
422 /* language ids */
423 switch (id) {
424 case 0:
425 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
426 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
427 if (len > 4)
428 len = 4;
429 memcpy(data, langids, len);
430 return len;
431 case 1:
432 /* Serial number */
433 s = hcd->self.bus_name;
434 break;
435 case 2:
436 /* Product name */
437 s = hcd->product_desc;
438 break;
439 case 3:
440 /* Manufacturer */
441 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
442 init_utsname()->release, hcd->driver->description);
443 s = buf;
444 break;
445 default:
446 /* Can't happen; caller guarantees it */
447 return 0;
448 }
449
450 return ascii2desc(s, data, len);
451}
452
453
454/* Root hub control transfers execute synchronously */
455static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
456{
457 struct usb_ctrlrequest *cmd;
458 u16 typeReq, wValue, wIndex, wLength;
459 u8 *ubuf = urb->transfer_buffer;
460 unsigned len = 0;
461 int status;
462 u8 patch_wakeup = 0;
463 u8 patch_protocol = 0;
464 u16 tbuf_size;
465 u8 *tbuf = NULL;
466 const u8 *bufp;
467
468 might_sleep();
469
470 spin_lock_irq(&hcd_root_hub_lock);
471 status = usb_hcd_link_urb_to_ep(hcd, urb);
472 spin_unlock_irq(&hcd_root_hub_lock);
473 if (status)
474 return status;
475 urb->hcpriv = hcd; /* Indicate it's queued */
476
477 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
478 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
479 wValue = le16_to_cpu (cmd->wValue);
480 wIndex = le16_to_cpu (cmd->wIndex);
481 wLength = le16_to_cpu (cmd->wLength);
482
483 if (wLength > urb->transfer_buffer_length)
484 goto error;
485
486 /*
487 * tbuf should be at least as big as the
488 * USB hub descriptor.
489 */
490 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
491 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
492 if (!tbuf) {
493 status = -ENOMEM;
494 goto err_alloc;
495 }
496
497 bufp = tbuf;
498
499
500 urb->actual_length = 0;
501 switch (typeReq) {
502
503 /* DEVICE REQUESTS */
504
505 /* The root hub's remote wakeup enable bit is implemented using
506 * driver model wakeup flags. If this system supports wakeup
507 * through USB, userspace may change the default "allow wakeup"
508 * policy through sysfs or these calls.
509 *
510 * Most root hubs support wakeup from downstream devices, for
511 * runtime power management (disabling USB clocks and reducing
512 * VBUS power usage). However, not all of them do so; silicon,
513 * board, and BIOS bugs here are not uncommon, so these can't
514 * be treated quite like external hubs.
515 *
516 * Likewise, not all root hubs will pass wakeup events upstream,
517 * to wake up the whole system. So don't assume root hub and
518 * controller capabilities are identical.
519 */
520
521 case DeviceRequest | USB_REQ_GET_STATUS:
522 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
523 << USB_DEVICE_REMOTE_WAKEUP)
524 | (1 << USB_DEVICE_SELF_POWERED);
525 tbuf[1] = 0;
526 len = 2;
527 break;
528 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
529 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
530 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
531 else
532 goto error;
533 break;
534 case DeviceOutRequest | USB_REQ_SET_FEATURE:
535 if (device_can_wakeup(&hcd->self.root_hub->dev)
536 && wValue == USB_DEVICE_REMOTE_WAKEUP)
537 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
538 else
539 goto error;
540 break;
541 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
542 tbuf[0] = 1;
543 len = 1;
544 fallthrough;
545 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
546 break;
547 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
548 switch (wValue & 0xff00) {
549 case USB_DT_DEVICE << 8:
550 switch (hcd->speed) {
551 case HCD_USB32:
552 case HCD_USB31:
553 bufp = usb31_rh_dev_descriptor;
554 break;
555 case HCD_USB3:
556 bufp = usb3_rh_dev_descriptor;
557 break;
558 case HCD_USB2:
559 bufp = usb2_rh_dev_descriptor;
560 break;
561 case HCD_USB11:
562 bufp = usb11_rh_dev_descriptor;
563 break;
564 default:
565 goto error;
566 }
567 len = 18;
568 if (hcd->has_tt)
569 patch_protocol = 1;
570 break;
571 case USB_DT_CONFIG << 8:
572 switch (hcd->speed) {
573 case HCD_USB32:
574 case HCD_USB31:
575 case HCD_USB3:
576 bufp = ss_rh_config_descriptor;
577 len = sizeof ss_rh_config_descriptor;
578 break;
579 case HCD_USB2:
580 bufp = hs_rh_config_descriptor;
581 len = sizeof hs_rh_config_descriptor;
582 break;
583 case HCD_USB11:
584 bufp = fs_rh_config_descriptor;
585 len = sizeof fs_rh_config_descriptor;
586 break;
587 default:
588 goto error;
589 }
590 if (device_can_wakeup(&hcd->self.root_hub->dev))
591 patch_wakeup = 1;
592 break;
593 case USB_DT_STRING << 8:
594 if ((wValue & 0xff) < 4)
595 urb->actual_length = rh_string(wValue & 0xff,
596 hcd, ubuf, wLength);
597 else /* unsupported IDs --> "protocol stall" */
598 goto error;
599 break;
600 case USB_DT_BOS << 8:
601 goto nongeneric;
602 default:
603 goto error;
604 }
605 break;
606 case DeviceRequest | USB_REQ_GET_INTERFACE:
607 tbuf[0] = 0;
608 len = 1;
609 fallthrough;
610 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
611 break;
612 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
613 /* wValue == urb->dev->devaddr */
614 dev_dbg (hcd->self.controller, "root hub device address %d\n",
615 wValue);
616 break;
617
618 /* INTERFACE REQUESTS (no defined feature/status flags) */
619
620 /* ENDPOINT REQUESTS */
621
622 case EndpointRequest | USB_REQ_GET_STATUS:
623 /* ENDPOINT_HALT flag */
624 tbuf[0] = 0;
625 tbuf[1] = 0;
626 len = 2;
627 fallthrough;
628 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
629 case EndpointOutRequest | USB_REQ_SET_FEATURE:
630 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
631 break;
632
633 /* CLASS REQUESTS (and errors) */
634
635 default:
636nongeneric:
637 /* non-generic request */
638 switch (typeReq) {
639 case GetHubStatus:
640 len = 4;
641 break;
642 case GetPortStatus:
643 if (wValue == HUB_PORT_STATUS)
644 len = 4;
645 else
646 /* other port status types return 8 bytes */
647 len = 8;
648 break;
649 case GetHubDescriptor:
650 len = sizeof (struct usb_hub_descriptor);
651 break;
652 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
653 /* len is returned by hub_control */
654 break;
655 }
656 status = hcd->driver->hub_control (hcd,
657 typeReq, wValue, wIndex,
658 tbuf, wLength);
659
660 if (typeReq == GetHubDescriptor)
661 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
662 (struct usb_hub_descriptor *)tbuf);
663 break;
664error:
665 /* "protocol stall" on error */
666 status = -EPIPE;
667 }
668
669 if (status < 0) {
670 len = 0;
671 if (status != -EPIPE) {
672 dev_dbg (hcd->self.controller,
673 "CTRL: TypeReq=0x%x val=0x%x "
674 "idx=0x%x len=%d ==> %d\n",
675 typeReq, wValue, wIndex,
676 wLength, status);
677 }
678 } else if (status > 0) {
679 /* hub_control may return the length of data copied. */
680 len = status;
681 status = 0;
682 }
683 if (len) {
684 if (urb->transfer_buffer_length < len)
685 len = urb->transfer_buffer_length;
686 urb->actual_length = len;
687 /* always USB_DIR_IN, toward host */
688 memcpy (ubuf, bufp, len);
689
690 /* report whether RH hardware supports remote wakeup */
691 if (patch_wakeup &&
692 len > offsetof (struct usb_config_descriptor,
693 bmAttributes))
694 ((struct usb_config_descriptor *)ubuf)->bmAttributes
695 |= USB_CONFIG_ATT_WAKEUP;
696
697 /* report whether RH hardware has an integrated TT */
698 if (patch_protocol &&
699 len > offsetof(struct usb_device_descriptor,
700 bDeviceProtocol))
701 ((struct usb_device_descriptor *) ubuf)->
702 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
703 }
704
705 kfree(tbuf);
706 err_alloc:
707
708 /* any errors get returned through the urb completion */
709 spin_lock_irq(&hcd_root_hub_lock);
710 usb_hcd_unlink_urb_from_ep(hcd, urb);
711 usb_hcd_giveback_urb(hcd, urb, status);
712 spin_unlock_irq(&hcd_root_hub_lock);
713 return 0;
714}
715
716/*-------------------------------------------------------------------------*/
717
718/*
719 * Root Hub interrupt transfers are polled using a timer if the
720 * driver requests it; otherwise the driver is responsible for
721 * calling usb_hcd_poll_rh_status() when an event occurs.
722 *
723 * Completion handler may not sleep. See usb_hcd_giveback_urb() for details.
724 */
725void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
726{
727 struct urb *urb;
728 int length;
729 int status;
730 unsigned long flags;
731 char buffer[6]; /* Any root hubs with > 31 ports? */
732
733 if (unlikely(!hcd->rh_pollable))
734 return;
735 if (!hcd->uses_new_polling && !hcd->status_urb)
736 return;
737
738 length = hcd->driver->hub_status_data(hcd, buffer);
739 if (length > 0) {
740
741 /* try to complete the status urb */
742 spin_lock_irqsave(&hcd_root_hub_lock, flags);
743 urb = hcd->status_urb;
744 if (urb) {
745 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
746 hcd->status_urb = NULL;
747 if (urb->transfer_buffer_length >= length) {
748 status = 0;
749 } else {
750 status = -EOVERFLOW;
751 length = urb->transfer_buffer_length;
752 }
753 urb->actual_length = length;
754 memcpy(urb->transfer_buffer, buffer, length);
755
756 usb_hcd_unlink_urb_from_ep(hcd, urb);
757 usb_hcd_giveback_urb(hcd, urb, status);
758 } else {
759 length = 0;
760 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
761 }
762 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
763 }
764
765 /* The USB 2.0 spec says 256 ms. This is close enough and won't
766 * exceed that limit if HZ is 100. The math is more clunky than
767 * maybe expected, this is to make sure that all timers for USB devices
768 * fire at the same time to give the CPU a break in between */
769 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
770 (length == 0 && hcd->status_urb != NULL))
771 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
772}
773EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
774
775/* timer callback */
776static void rh_timer_func (struct timer_list *t)
777{
778 struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
779
780 usb_hcd_poll_rh_status(_hcd);
781}
782
783/*-------------------------------------------------------------------------*/
784
785static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
786{
787 int retval;
788 unsigned long flags;
789 unsigned len = 1 + (urb->dev->maxchild / 8);
790
791 spin_lock_irqsave (&hcd_root_hub_lock, flags);
792 if (hcd->status_urb || urb->transfer_buffer_length < len) {
793 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
794 retval = -EINVAL;
795 goto done;
796 }
797
798 retval = usb_hcd_link_urb_to_ep(hcd, urb);
799 if (retval)
800 goto done;
801
802 hcd->status_urb = urb;
803 urb->hcpriv = hcd; /* indicate it's queued */
804 if (!hcd->uses_new_polling)
805 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
806
807 /* If a status change has already occurred, report it ASAP */
808 else if (HCD_POLL_PENDING(hcd))
809 mod_timer(&hcd->rh_timer, jiffies);
810 retval = 0;
811 done:
812 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
813 return retval;
814}
815
816static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
817{
818 if (usb_endpoint_xfer_int(&urb->ep->desc))
819 return rh_queue_status (hcd, urb);
820 if (usb_endpoint_xfer_control(&urb->ep->desc))
821 return rh_call_control (hcd, urb);
822 return -EINVAL;
823}
824
825/*-------------------------------------------------------------------------*/
826
827/* Unlinks of root-hub control URBs are legal, but they don't do anything
828 * since these URBs always execute synchronously.
829 */
830static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
831{
832 unsigned long flags;
833 int rc;
834
835 spin_lock_irqsave(&hcd_root_hub_lock, flags);
836 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
837 if (rc)
838 goto done;
839
840 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
841 ; /* Do nothing */
842
843 } else { /* Status URB */
844 if (!hcd->uses_new_polling)
845 del_timer (&hcd->rh_timer);
846 if (urb == hcd->status_urb) {
847 hcd->status_urb = NULL;
848 usb_hcd_unlink_urb_from_ep(hcd, urb);
849 usb_hcd_giveback_urb(hcd, urb, status);
850 }
851 }
852 done:
853 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
854 return rc;
855}
856
857
858/*-------------------------------------------------------------------------*/
859
860/**
861 * usb_bus_init - shared initialization code
862 * @bus: the bus structure being initialized
863 *
864 * This code is used to initialize a usb_bus structure, memory for which is
865 * separately managed.
866 */
867static void usb_bus_init (struct usb_bus *bus)
868{
869 memset(&bus->devmap, 0, sizeof(bus->devmap));
870
871 bus->devnum_next = 1;
872
873 bus->root_hub = NULL;
874 bus->busnum = -1;
875 bus->bandwidth_allocated = 0;
876 bus->bandwidth_int_reqs = 0;
877 bus->bandwidth_isoc_reqs = 0;
878 mutex_init(&bus->devnum_next_mutex);
879}
880
881/*-------------------------------------------------------------------------*/
882
883/**
884 * usb_register_bus - registers the USB host controller with the usb core
885 * @bus: pointer to the bus to register
886 *
887 * Context: task context, might sleep.
888 *
889 * Assigns a bus number, and links the controller into usbcore data
890 * structures so that it can be seen by scanning the bus list.
891 *
892 * Return: 0 if successful. A negative error code otherwise.
893 */
894static int usb_register_bus(struct usb_bus *bus)
895{
896 int result = -E2BIG;
897 int busnum;
898
899 mutex_lock(&usb_bus_idr_lock);
900 busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
901 if (busnum < 0) {
902 pr_err("%s: failed to get bus number\n", usbcore_name);
903 goto error_find_busnum;
904 }
905 bus->busnum = busnum;
906 mutex_unlock(&usb_bus_idr_lock);
907
908 usb_notify_add_bus(bus);
909
910 dev_info (bus->controller, "new USB bus registered, assigned bus "
911 "number %d\n", bus->busnum);
912 return 0;
913
914error_find_busnum:
915 mutex_unlock(&usb_bus_idr_lock);
916 return result;
917}
918
919/**
920 * usb_deregister_bus - deregisters the USB host controller
921 * @bus: pointer to the bus to deregister
922 *
923 * Context: task context, might sleep.
924 *
925 * Recycles the bus number, and unlinks the controller from usbcore data
926 * structures so that it won't be seen by scanning the bus list.
927 */
928static void usb_deregister_bus (struct usb_bus *bus)
929{
930 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
931
932 /*
933 * NOTE: make sure that all the devices are removed by the
934 * controller code, as well as having it call this when cleaning
935 * itself up
936 */
937 mutex_lock(&usb_bus_idr_lock);
938 idr_remove(&usb_bus_idr, bus->busnum);
939 mutex_unlock(&usb_bus_idr_lock);
940
941 usb_notify_remove_bus(bus);
942}
943
944/**
945 * register_root_hub - called by usb_add_hcd() to register a root hub
946 * @hcd: host controller for this root hub
947 *
948 * This function registers the root hub with the USB subsystem. It sets up
949 * the device properly in the device tree and then calls usb_new_device()
950 * to register the usb device. It also assigns the root hub's USB address
951 * (always 1).
952 *
953 * Return: 0 if successful. A negative error code otherwise.
954 */
955static int register_root_hub(struct usb_hcd *hcd)
956{
957 struct device *parent_dev = hcd->self.controller;
958 struct usb_device *usb_dev = hcd->self.root_hub;
959 struct usb_device_descriptor *descr;
960 const int devnum = 1;
961 int retval;
962
963 usb_dev->devnum = devnum;
964 usb_dev->bus->devnum_next = devnum + 1;
965 set_bit(devnum, usb_dev->bus->devmap);
966 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
967
968 mutex_lock(&usb_bus_idr_lock);
969
970 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
971 descr = usb_get_device_descriptor(usb_dev);
972 if (IS_ERR(descr)) {
973 retval = PTR_ERR(descr);
974 mutex_unlock(&usb_bus_idr_lock);
975 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
976 dev_name(&usb_dev->dev), retval);
977 return retval;
978 }
979 usb_dev->descriptor = *descr;
980 kfree(descr);
981
982 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
983 retval = usb_get_bos_descriptor(usb_dev);
984 if (!retval) {
985 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
986 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
987 mutex_unlock(&usb_bus_idr_lock);
988 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
989 dev_name(&usb_dev->dev), retval);
990 return retval;
991 }
992 }
993
994 retval = usb_new_device (usb_dev);
995 if (retval) {
996 dev_err (parent_dev, "can't register root hub for %s, %d\n",
997 dev_name(&usb_dev->dev), retval);
998 } else {
999 spin_lock_irq (&hcd_root_hub_lock);
1000 hcd->rh_registered = 1;
1001 spin_unlock_irq (&hcd_root_hub_lock);
1002
1003 /* Did the HC die before the root hub was registered? */
1004 if (HCD_DEAD(hcd))
1005 usb_hc_died (hcd); /* This time clean up */
1006 }
1007 mutex_unlock(&usb_bus_idr_lock);
1008
1009 return retval;
1010}
1011
1012/*
1013 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1014 * @bus: the bus which the root hub belongs to
1015 * @portnum: the port which is being resumed
1016 *
1017 * HCDs should call this function when they know that a resume signal is
1018 * being sent to a root-hub port. The root hub will be prevented from
1019 * going into autosuspend until usb_hcd_end_port_resume() is called.
1020 *
1021 * The bus's private lock must be held by the caller.
1022 */
1023void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1024{
1025 unsigned bit = 1 << portnum;
1026
1027 if (!(bus->resuming_ports & bit)) {
1028 bus->resuming_ports |= bit;
1029 pm_runtime_get_noresume(&bus->root_hub->dev);
1030 }
1031}
1032EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1033
1034/*
1035 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1036 * @bus: the bus which the root hub belongs to
1037 * @portnum: the port which is being resumed
1038 *
1039 * HCDs should call this function when they know that a resume signal has
1040 * stopped being sent to a root-hub port. The root hub will be allowed to
1041 * autosuspend again.
1042 *
1043 * The bus's private lock must be held by the caller.
1044 */
1045void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1046{
1047 unsigned bit = 1 << portnum;
1048
1049 if (bus->resuming_ports & bit) {
1050 bus->resuming_ports &= ~bit;
1051 pm_runtime_put_noidle(&bus->root_hub->dev);
1052 }
1053}
1054EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1055
1056/*-------------------------------------------------------------------------*/
1057
1058/**
1059 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1060 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1061 * @is_input: true iff the transaction sends data to the host
1062 * @isoc: true for isochronous transactions, false for interrupt ones
1063 * @bytecount: how many bytes in the transaction.
1064 *
1065 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1066 *
1067 * Note:
1068 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1069 * scheduled in software, this function is only used for such scheduling.
1070 */
1071long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1072{
1073 unsigned long tmp;
1074
1075 switch (speed) {
1076 case USB_SPEED_LOW: /* INTR only */
1077 if (is_input) {
1078 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1079 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1080 } else {
1081 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1082 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1083 }
1084 case USB_SPEED_FULL: /* ISOC or INTR */
1085 if (isoc) {
1086 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1087 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1088 } else {
1089 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1090 return 9107L + BW_HOST_DELAY + tmp;
1091 }
1092 case USB_SPEED_HIGH: /* ISOC or INTR */
1093 /* FIXME adjust for input vs output */
1094 if (isoc)
1095 tmp = HS_NSECS_ISO (bytecount);
1096 else
1097 tmp = HS_NSECS (bytecount);
1098 return tmp;
1099 default:
1100 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1101 return -1;
1102 }
1103}
1104EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1105
1106
1107/*-------------------------------------------------------------------------*/
1108
1109/*
1110 * Generic HC operations.
1111 */
1112
1113/*-------------------------------------------------------------------------*/
1114
1115/**
1116 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1117 * @hcd: host controller to which @urb was submitted
1118 * @urb: URB being submitted
1119 *
1120 * Host controller drivers should call this routine in their enqueue()
1121 * method. The HCD's private spinlock must be held and interrupts must
1122 * be disabled. The actions carried out here are required for URB
1123 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1124 *
1125 * Return: 0 for no error, otherwise a negative error code (in which case
1126 * the enqueue() method must fail). If no error occurs but enqueue() fails
1127 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1128 * the private spinlock and returning.
1129 */
1130int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1131{
1132 int rc = 0;
1133
1134 spin_lock(&hcd_urb_list_lock);
1135
1136 /* Check that the URB isn't being killed */
1137 if (unlikely(atomic_read(&urb->reject))) {
1138 rc = -EPERM;
1139 goto done;
1140 }
1141
1142 if (unlikely(!urb->ep->enabled)) {
1143 rc = -ENOENT;
1144 goto done;
1145 }
1146
1147 if (unlikely(!urb->dev->can_submit)) {
1148 rc = -EHOSTUNREACH;
1149 goto done;
1150 }
1151
1152 /*
1153 * Check the host controller's state and add the URB to the
1154 * endpoint's queue.
1155 */
1156 if (HCD_RH_RUNNING(hcd)) {
1157 urb->unlinked = 0;
1158 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1159 } else {
1160 rc = -ESHUTDOWN;
1161 goto done;
1162 }
1163 done:
1164 spin_unlock(&hcd_urb_list_lock);
1165 return rc;
1166}
1167EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1168
1169/**
1170 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1171 * @hcd: host controller to which @urb was submitted
1172 * @urb: URB being checked for unlinkability
1173 * @status: error code to store in @urb if the unlink succeeds
1174 *
1175 * Host controller drivers should call this routine in their dequeue()
1176 * method. The HCD's private spinlock must be held and interrupts must
1177 * be disabled. The actions carried out here are required for making
1178 * sure than an unlink is valid.
1179 *
1180 * Return: 0 for no error, otherwise a negative error code (in which case
1181 * the dequeue() method must fail). The possible error codes are:
1182 *
1183 * -EIDRM: @urb was not submitted or has already completed.
1184 * The completion function may not have been called yet.
1185 *
1186 * -EBUSY: @urb has already been unlinked.
1187 */
1188int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1189 int status)
1190{
1191 struct list_head *tmp;
1192
1193 /* insist the urb is still queued */
1194 list_for_each(tmp, &urb->ep->urb_list) {
1195 if (tmp == &urb->urb_list)
1196 break;
1197 }
1198 if (tmp != &urb->urb_list)
1199 return -EIDRM;
1200
1201 /* Any status except -EINPROGRESS means something already started to
1202 * unlink this URB from the hardware. So there's no more work to do.
1203 */
1204 if (urb->unlinked)
1205 return -EBUSY;
1206 urb->unlinked = status;
1207 return 0;
1208}
1209EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1210
1211/**
1212 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1213 * @hcd: host controller to which @urb was submitted
1214 * @urb: URB being unlinked
1215 *
1216 * Host controller drivers should call this routine before calling
1217 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1218 * interrupts must be disabled. The actions carried out here are required
1219 * for URB completion.
1220 */
1221void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1222{
1223 /* clear all state linking urb to this dev (and hcd) */
1224 spin_lock(&hcd_urb_list_lock);
1225 list_del_init(&urb->urb_list);
1226 spin_unlock(&hcd_urb_list_lock);
1227}
1228EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1229
1230/*
1231 * Some usb host controllers can only perform dma using a small SRAM area,
1232 * or have restrictions on addressable DRAM.
1233 * The usb core itself is however optimized for host controllers that can dma
1234 * using regular system memory - like pci devices doing bus mastering.
1235 *
1236 * To support host controllers with limited dma capabilities we provide dma
1237 * bounce buffers. This feature can be enabled by initializing
1238 * hcd->localmem_pool using usb_hcd_setup_local_mem().
1239 *
1240 * The initialized hcd->localmem_pool then tells the usb code to allocate all
1241 * data for dma using the genalloc API.
1242 *
1243 * So, to summarize...
1244 *
1245 * - We need "local" memory, canonical example being
1246 * a small SRAM on a discrete controller being the
1247 * only memory that the controller can read ...
1248 * (a) "normal" kernel memory is no good, and
1249 * (b) there's not enough to share
1250 *
1251 * - So we use that, even though the primary requirement
1252 * is that the memory be "local" (hence addressable
1253 * by that device), not "coherent".
1254 *
1255 */
1256
1257static int hcd_alloc_coherent(struct usb_bus *bus,
1258 gfp_t mem_flags, dma_addr_t *dma_handle,
1259 void **vaddr_handle, size_t size,
1260 enum dma_data_direction dir)
1261{
1262 unsigned char *vaddr;
1263
1264 if (*vaddr_handle == NULL) {
1265 WARN_ON_ONCE(1);
1266 return -EFAULT;
1267 }
1268
1269 vaddr = hcd_buffer_alloc(bus, size + sizeof(unsigned long),
1270 mem_flags, dma_handle);
1271 if (!vaddr)
1272 return -ENOMEM;
1273
1274 /*
1275 * Store the virtual address of the buffer at the end
1276 * of the allocated dma buffer. The size of the buffer
1277 * may be uneven so use unaligned functions instead
1278 * of just rounding up. It makes sense to optimize for
1279 * memory footprint over access speed since the amount
1280 * of memory available for dma may be limited.
1281 */
1282 put_unaligned((unsigned long)*vaddr_handle,
1283 (unsigned long *)(vaddr + size));
1284
1285 if (dir == DMA_TO_DEVICE)
1286 memcpy(vaddr, *vaddr_handle, size);
1287
1288 *vaddr_handle = vaddr;
1289 return 0;
1290}
1291
1292static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1293 void **vaddr_handle, size_t size,
1294 enum dma_data_direction dir)
1295{
1296 unsigned char *vaddr = *vaddr_handle;
1297
1298 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1299
1300 if (dir == DMA_FROM_DEVICE)
1301 memcpy(vaddr, *vaddr_handle, size);
1302
1303 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1304
1305 *vaddr_handle = vaddr;
1306 *dma_handle = 0;
1307}
1308
1309void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1310{
1311 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1312 (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1313 dma_unmap_single(hcd->self.sysdev,
1314 urb->setup_dma,
1315 sizeof(struct usb_ctrlrequest),
1316 DMA_TO_DEVICE);
1317 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1318 hcd_free_coherent(urb->dev->bus,
1319 &urb->setup_dma,
1320 (void **) &urb->setup_packet,
1321 sizeof(struct usb_ctrlrequest),
1322 DMA_TO_DEVICE);
1323
1324 /* Make it safe to call this routine more than once */
1325 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1326}
1327EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1328
1329static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1330{
1331 if (hcd->driver->unmap_urb_for_dma)
1332 hcd->driver->unmap_urb_for_dma(hcd, urb);
1333 else
1334 usb_hcd_unmap_urb_for_dma(hcd, urb);
1335}
1336
1337void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1338{
1339 enum dma_data_direction dir;
1340
1341 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1342
1343 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1344 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1345 (urb->transfer_flags & URB_DMA_MAP_SG))
1346 dma_unmap_sg(hcd->self.sysdev,
1347 urb->sg,
1348 urb->num_sgs,
1349 dir);
1350 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1351 (urb->transfer_flags & URB_DMA_MAP_PAGE))
1352 dma_unmap_page(hcd->self.sysdev,
1353 urb->transfer_dma,
1354 urb->transfer_buffer_length,
1355 dir);
1356 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1357 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1358 dma_unmap_single(hcd->self.sysdev,
1359 urb->transfer_dma,
1360 urb->transfer_buffer_length,
1361 dir);
1362 else if (urb->transfer_flags & URB_MAP_LOCAL)
1363 hcd_free_coherent(urb->dev->bus,
1364 &urb->transfer_dma,
1365 &urb->transfer_buffer,
1366 urb->transfer_buffer_length,
1367 dir);
1368
1369 /* Make it safe to call this routine more than once */
1370 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1371 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1372}
1373EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1374
1375static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1376 gfp_t mem_flags)
1377{
1378 if (hcd->driver->map_urb_for_dma)
1379 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1380 else
1381 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1382}
1383
1384int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1385 gfp_t mem_flags)
1386{
1387 enum dma_data_direction dir;
1388 int ret = 0;
1389
1390 /* Map the URB's buffers for DMA access.
1391 * Lower level HCD code should use *_dma exclusively,
1392 * unless it uses pio or talks to another transport,
1393 * or uses the provided scatter gather list for bulk.
1394 */
1395
1396 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1397 if (hcd->self.uses_pio_for_control)
1398 return ret;
1399 if (hcd->localmem_pool) {
1400 ret = hcd_alloc_coherent(
1401 urb->dev->bus, mem_flags,
1402 &urb->setup_dma,
1403 (void **)&urb->setup_packet,
1404 sizeof(struct usb_ctrlrequest),
1405 DMA_TO_DEVICE);
1406 if (ret)
1407 return ret;
1408 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1409 } else if (hcd_uses_dma(hcd)) {
1410 if (object_is_on_stack(urb->setup_packet)) {
1411 WARN_ONCE(1, "setup packet is on stack\n");
1412 return -EAGAIN;
1413 }
1414
1415 urb->setup_dma = dma_map_single(
1416 hcd->self.sysdev,
1417 urb->setup_packet,
1418 sizeof(struct usb_ctrlrequest),
1419 DMA_TO_DEVICE);
1420 if (dma_mapping_error(hcd->self.sysdev,
1421 urb->setup_dma))
1422 return -EAGAIN;
1423 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1424 }
1425 }
1426
1427 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1428 if (urb->transfer_buffer_length != 0
1429 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1430 if (hcd->localmem_pool) {
1431 ret = hcd_alloc_coherent(
1432 urb->dev->bus, mem_flags,
1433 &urb->transfer_dma,
1434 &urb->transfer_buffer,
1435 urb->transfer_buffer_length,
1436 dir);
1437 if (ret == 0)
1438 urb->transfer_flags |= URB_MAP_LOCAL;
1439 } else if (hcd_uses_dma(hcd)) {
1440 if (urb->num_sgs) {
1441 int n;
1442
1443 /* We don't support sg for isoc transfers ! */
1444 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1445 WARN_ON(1);
1446 return -EINVAL;
1447 }
1448
1449 n = dma_map_sg(
1450 hcd->self.sysdev,
1451 urb->sg,
1452 urb->num_sgs,
1453 dir);
1454 if (!n)
1455 ret = -EAGAIN;
1456 else
1457 urb->transfer_flags |= URB_DMA_MAP_SG;
1458 urb->num_mapped_sgs = n;
1459 if (n != urb->num_sgs)
1460 urb->transfer_flags |=
1461 URB_DMA_SG_COMBINED;
1462 } else if (urb->sg) {
1463 struct scatterlist *sg = urb->sg;
1464 urb->transfer_dma = dma_map_page(
1465 hcd->self.sysdev,
1466 sg_page(sg),
1467 sg->offset,
1468 urb->transfer_buffer_length,
1469 dir);
1470 if (dma_mapping_error(hcd->self.sysdev,
1471 urb->transfer_dma))
1472 ret = -EAGAIN;
1473 else
1474 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1475 } else if (object_is_on_stack(urb->transfer_buffer)) {
1476 WARN_ONCE(1, "transfer buffer is on stack\n");
1477 ret = -EAGAIN;
1478 } else {
1479 urb->transfer_dma = dma_map_single(
1480 hcd->self.sysdev,
1481 urb->transfer_buffer,
1482 urb->transfer_buffer_length,
1483 dir);
1484 if (dma_mapping_error(hcd->self.sysdev,
1485 urb->transfer_dma))
1486 ret = -EAGAIN;
1487 else
1488 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1489 }
1490 }
1491 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1492 URB_SETUP_MAP_LOCAL)))
1493 usb_hcd_unmap_urb_for_dma(hcd, urb);
1494 }
1495 return ret;
1496}
1497EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1498
1499/*-------------------------------------------------------------------------*/
1500
1501/* may be called in any context with a valid urb->dev usecount
1502 * caller surrenders "ownership" of urb
1503 * expects usb_submit_urb() to have sanity checked and conditioned all
1504 * inputs in the urb
1505 */
1506int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1507{
1508 int status;
1509 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1510
1511 /* increment urb's reference count as part of giving it to the HCD
1512 * (which will control it). HCD guarantees that it either returns
1513 * an error or calls giveback(), but not both.
1514 */
1515 usb_get_urb(urb);
1516 atomic_inc(&urb->use_count);
1517 atomic_inc(&urb->dev->urbnum);
1518 usbmon_urb_submit(&hcd->self, urb);
1519
1520 /* NOTE requirements on root-hub callers (usbfs and the hub
1521 * driver, for now): URBs' urb->transfer_buffer must be
1522 * valid and usb_buffer_{sync,unmap}() not be needed, since
1523 * they could clobber root hub response data. Also, control
1524 * URBs must be submitted in process context with interrupts
1525 * enabled.
1526 */
1527
1528 if (is_root_hub(urb->dev)) {
1529 status = rh_urb_enqueue(hcd, urb);
1530 } else {
1531 status = map_urb_for_dma(hcd, urb, mem_flags);
1532 if (likely(status == 0)) {
1533 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1534 if (unlikely(status))
1535 unmap_urb_for_dma(hcd, urb);
1536 }
1537 }
1538
1539 if (unlikely(status)) {
1540 usbmon_urb_submit_error(&hcd->self, urb, status);
1541 urb->hcpriv = NULL;
1542 INIT_LIST_HEAD(&urb->urb_list);
1543 atomic_dec(&urb->use_count);
1544 /*
1545 * Order the write of urb->use_count above before the read
1546 * of urb->reject below. Pairs with the memory barriers in
1547 * usb_kill_urb() and usb_poison_urb().
1548 */
1549 smp_mb__after_atomic();
1550
1551 atomic_dec(&urb->dev->urbnum);
1552 if (atomic_read(&urb->reject))
1553 wake_up(&usb_kill_urb_queue);
1554 usb_put_urb(urb);
1555 }
1556 return status;
1557}
1558
1559/*-------------------------------------------------------------------------*/
1560
1561/* this makes the hcd giveback() the urb more quickly, by kicking it
1562 * off hardware queues (which may take a while) and returning it as
1563 * soon as practical. we've already set up the urb's return status,
1564 * but we can't know if the callback completed already.
1565 */
1566static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1567{
1568 int value;
1569
1570 if (is_root_hub(urb->dev))
1571 value = usb_rh_urb_dequeue(hcd, urb, status);
1572 else {
1573
1574 /* The only reason an HCD might fail this call is if
1575 * it has not yet fully queued the urb to begin with.
1576 * Such failures should be harmless. */
1577 value = hcd->driver->urb_dequeue(hcd, urb, status);
1578 }
1579 return value;
1580}
1581
1582/*
1583 * called in any context
1584 *
1585 * caller guarantees urb won't be recycled till both unlink()
1586 * and the urb's completion function return
1587 */
1588int usb_hcd_unlink_urb (struct urb *urb, int status)
1589{
1590 struct usb_hcd *hcd;
1591 struct usb_device *udev = urb->dev;
1592 int retval = -EIDRM;
1593 unsigned long flags;
1594
1595 /* Prevent the device and bus from going away while
1596 * the unlink is carried out. If they are already gone
1597 * then urb->use_count must be 0, since disconnected
1598 * devices can't have any active URBs.
1599 */
1600 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1601 if (atomic_read(&urb->use_count) > 0) {
1602 retval = 0;
1603 usb_get_dev(udev);
1604 }
1605 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1606 if (retval == 0) {
1607 hcd = bus_to_hcd(urb->dev->bus);
1608 retval = unlink1(hcd, urb, status);
1609 if (retval == 0)
1610 retval = -EINPROGRESS;
1611 else if (retval != -EIDRM && retval != -EBUSY)
1612 dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
1613 urb, retval);
1614 usb_put_dev(udev);
1615 }
1616 return retval;
1617}
1618
1619/*-------------------------------------------------------------------------*/
1620
1621static void __usb_hcd_giveback_urb(struct urb *urb)
1622{
1623 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1624 struct usb_anchor *anchor = urb->anchor;
1625 int status = urb->unlinked;
1626 unsigned long flags;
1627
1628 urb->hcpriv = NULL;
1629 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1630 urb->actual_length < urb->transfer_buffer_length &&
1631 !status))
1632 status = -EREMOTEIO;
1633
1634 unmap_urb_for_dma(hcd, urb);
1635 usbmon_urb_complete(&hcd->self, urb, status);
1636 usb_anchor_suspend_wakeups(anchor);
1637 usb_unanchor_urb(urb);
1638 if (likely(status == 0))
1639 usb_led_activity(USB_LED_EVENT_HOST);
1640
1641 /* pass ownership to the completion handler */
1642 urb->status = status;
1643 /*
1644 * Only collect coverage in the softirq context and disable interrupts
1645 * to avoid scenarios with nested remote coverage collection sections
1646 * that KCOV does not support.
1647 * See the comment next to kcov_remote_start_usb_softirq() for details.
1648 */
1649 flags = kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
1650 urb->complete(urb);
1651 kcov_remote_stop_softirq(flags);
1652
1653 usb_anchor_resume_wakeups(anchor);
1654 atomic_dec(&urb->use_count);
1655 /*
1656 * Order the write of urb->use_count above before the read
1657 * of urb->reject below. Pairs with the memory barriers in
1658 * usb_kill_urb() and usb_poison_urb().
1659 */
1660 smp_mb__after_atomic();
1661
1662 if (unlikely(atomic_read(&urb->reject)))
1663 wake_up(&usb_kill_urb_queue);
1664 usb_put_urb(urb);
1665}
1666
1667static void usb_giveback_urb_bh(struct work_struct *work)
1668{
1669 struct giveback_urb_bh *bh =
1670 container_of(work, struct giveback_urb_bh, bh);
1671 struct list_head local_list;
1672
1673 spin_lock_irq(&bh->lock);
1674 bh->running = true;
1675 list_replace_init(&bh->head, &local_list);
1676 spin_unlock_irq(&bh->lock);
1677
1678 while (!list_empty(&local_list)) {
1679 struct urb *urb;
1680
1681 urb = list_entry(local_list.next, struct urb, urb_list);
1682 list_del_init(&urb->urb_list);
1683 bh->completing_ep = urb->ep;
1684 __usb_hcd_giveback_urb(urb);
1685 bh->completing_ep = NULL;
1686 }
1687
1688 /*
1689 * giveback new URBs next time to prevent this function
1690 * from not exiting for a long time.
1691 */
1692 spin_lock_irq(&bh->lock);
1693 if (!list_empty(&bh->head)) {
1694 if (bh->high_prio)
1695 queue_work(system_bh_highpri_wq, &bh->bh);
1696 else
1697 queue_work(system_bh_wq, &bh->bh);
1698 }
1699 bh->running = false;
1700 spin_unlock_irq(&bh->lock);
1701}
1702
1703/**
1704 * usb_hcd_giveback_urb - return URB from HCD to device driver
1705 * @hcd: host controller returning the URB
1706 * @urb: urb being returned to the USB device driver.
1707 * @status: completion status code for the URB.
1708 *
1709 * Context: atomic. The completion callback is invoked in caller's context.
1710 * For HCDs with HCD_BH flag set, the completion callback is invoked in BH
1711 * context (except for URBs submitted to the root hub which always complete in
1712 * caller's context).
1713 *
1714 * This hands the URB from HCD to its USB device driver, using its
1715 * completion function. The HCD has freed all per-urb resources
1716 * (and is done using urb->hcpriv). It also released all HCD locks;
1717 * the device driver won't cause problems if it frees, modifies,
1718 * or resubmits this URB.
1719 *
1720 * If @urb was unlinked, the value of @status will be overridden by
1721 * @urb->unlinked. Erroneous short transfers are detected in case
1722 * the HCD hasn't checked for them.
1723 */
1724void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1725{
1726 struct giveback_urb_bh *bh;
1727 bool running;
1728
1729 /* pass status to BH via unlinked */
1730 if (likely(!urb->unlinked))
1731 urb->unlinked = status;
1732
1733 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1734 __usb_hcd_giveback_urb(urb);
1735 return;
1736 }
1737
1738 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe))
1739 bh = &hcd->high_prio_bh;
1740 else
1741 bh = &hcd->low_prio_bh;
1742
1743 spin_lock(&bh->lock);
1744 list_add_tail(&urb->urb_list, &bh->head);
1745 running = bh->running;
1746 spin_unlock(&bh->lock);
1747
1748 if (running)
1749 ;
1750 else if (bh->high_prio)
1751 queue_work(system_bh_highpri_wq, &bh->bh);
1752 else
1753 queue_work(system_bh_wq, &bh->bh);
1754}
1755EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1756
1757/*-------------------------------------------------------------------------*/
1758
1759/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1760 * queue to drain completely. The caller must first insure that no more
1761 * URBs can be submitted for this endpoint.
1762 */
1763void usb_hcd_flush_endpoint(struct usb_device *udev,
1764 struct usb_host_endpoint *ep)
1765{
1766 struct usb_hcd *hcd;
1767 struct urb *urb;
1768
1769 if (!ep)
1770 return;
1771 might_sleep();
1772 hcd = bus_to_hcd(udev->bus);
1773
1774 /* No more submits can occur */
1775 spin_lock_irq(&hcd_urb_list_lock);
1776rescan:
1777 list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
1778 int is_in;
1779
1780 if (urb->unlinked)
1781 continue;
1782 usb_get_urb (urb);
1783 is_in = usb_urb_dir_in(urb);
1784 spin_unlock(&hcd_urb_list_lock);
1785
1786 /* kick hcd */
1787 unlink1(hcd, urb, -ESHUTDOWN);
1788 dev_dbg (hcd->self.controller,
1789 "shutdown urb %pK ep%d%s-%s\n",
1790 urb, usb_endpoint_num(&ep->desc),
1791 is_in ? "in" : "out",
1792 usb_ep_type_string(usb_endpoint_type(&ep->desc)));
1793 usb_put_urb (urb);
1794
1795 /* list contents may have changed */
1796 spin_lock(&hcd_urb_list_lock);
1797 goto rescan;
1798 }
1799 spin_unlock_irq(&hcd_urb_list_lock);
1800
1801 /* Wait until the endpoint queue is completely empty */
1802 while (!list_empty (&ep->urb_list)) {
1803 spin_lock_irq(&hcd_urb_list_lock);
1804
1805 /* The list may have changed while we acquired the spinlock */
1806 urb = NULL;
1807 if (!list_empty (&ep->urb_list)) {
1808 urb = list_entry (ep->urb_list.prev, struct urb,
1809 urb_list);
1810 usb_get_urb (urb);
1811 }
1812 spin_unlock_irq(&hcd_urb_list_lock);
1813
1814 if (urb) {
1815 usb_kill_urb (urb);
1816 usb_put_urb (urb);
1817 }
1818 }
1819}
1820
1821/**
1822 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1823 * the bus bandwidth
1824 * @udev: target &usb_device
1825 * @new_config: new configuration to install
1826 * @cur_alt: the current alternate interface setting
1827 * @new_alt: alternate interface setting that is being installed
1828 *
1829 * To change configurations, pass in the new configuration in new_config,
1830 * and pass NULL for cur_alt and new_alt.
1831 *
1832 * To reset a device's configuration (put the device in the ADDRESSED state),
1833 * pass in NULL for new_config, cur_alt, and new_alt.
1834 *
1835 * To change alternate interface settings, pass in NULL for new_config,
1836 * pass in the current alternate interface setting in cur_alt,
1837 * and pass in the new alternate interface setting in new_alt.
1838 *
1839 * Return: An error if the requested bandwidth change exceeds the
1840 * bus bandwidth or host controller internal resources.
1841 */
1842int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1843 struct usb_host_config *new_config,
1844 struct usb_host_interface *cur_alt,
1845 struct usb_host_interface *new_alt)
1846{
1847 int num_intfs, i, j;
1848 struct usb_host_interface *alt = NULL;
1849 int ret = 0;
1850 struct usb_hcd *hcd;
1851 struct usb_host_endpoint *ep;
1852
1853 hcd = bus_to_hcd(udev->bus);
1854 if (!hcd->driver->check_bandwidth)
1855 return 0;
1856
1857 /* Configuration is being removed - set configuration 0 */
1858 if (!new_config && !cur_alt) {
1859 for (i = 1; i < 16; ++i) {
1860 ep = udev->ep_out[i];
1861 if (ep)
1862 hcd->driver->drop_endpoint(hcd, udev, ep);
1863 ep = udev->ep_in[i];
1864 if (ep)
1865 hcd->driver->drop_endpoint(hcd, udev, ep);
1866 }
1867 hcd->driver->check_bandwidth(hcd, udev);
1868 return 0;
1869 }
1870 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1871 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1872 * of the bus. There will always be bandwidth for endpoint 0, so it's
1873 * ok to exclude it.
1874 */
1875 if (new_config) {
1876 num_intfs = new_config->desc.bNumInterfaces;
1877 /* Remove endpoints (except endpoint 0, which is always on the
1878 * schedule) from the old config from the schedule
1879 */
1880 for (i = 1; i < 16; ++i) {
1881 ep = udev->ep_out[i];
1882 if (ep) {
1883 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1884 if (ret < 0)
1885 goto reset;
1886 }
1887 ep = udev->ep_in[i];
1888 if (ep) {
1889 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1890 if (ret < 0)
1891 goto reset;
1892 }
1893 }
1894 for (i = 0; i < num_intfs; ++i) {
1895 struct usb_host_interface *first_alt;
1896 int iface_num;
1897
1898 first_alt = &new_config->intf_cache[i]->altsetting[0];
1899 iface_num = first_alt->desc.bInterfaceNumber;
1900 /* Set up endpoints for alternate interface setting 0 */
1901 alt = usb_find_alt_setting(new_config, iface_num, 0);
1902 if (!alt)
1903 /* No alt setting 0? Pick the first setting. */
1904 alt = first_alt;
1905
1906 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1907 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1908 if (ret < 0)
1909 goto reset;
1910 }
1911 }
1912 }
1913 if (cur_alt && new_alt) {
1914 struct usb_interface *iface = usb_ifnum_to_if(udev,
1915 cur_alt->desc.bInterfaceNumber);
1916
1917 if (!iface)
1918 return -EINVAL;
1919 if (iface->resetting_device) {
1920 /*
1921 * The USB core just reset the device, so the xHCI host
1922 * and the device will think alt setting 0 is installed.
1923 * However, the USB core will pass in the alternate
1924 * setting installed before the reset as cur_alt. Dig
1925 * out the alternate setting 0 structure, or the first
1926 * alternate setting if a broken device doesn't have alt
1927 * setting 0.
1928 */
1929 cur_alt = usb_altnum_to_altsetting(iface, 0);
1930 if (!cur_alt)
1931 cur_alt = &iface->altsetting[0];
1932 }
1933
1934 /* Drop all the endpoints in the current alt setting */
1935 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
1936 ret = hcd->driver->drop_endpoint(hcd, udev,
1937 &cur_alt->endpoint[i]);
1938 if (ret < 0)
1939 goto reset;
1940 }
1941 /* Add all the endpoints in the new alt setting */
1942 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
1943 ret = hcd->driver->add_endpoint(hcd, udev,
1944 &new_alt->endpoint[i]);
1945 if (ret < 0)
1946 goto reset;
1947 }
1948 }
1949 ret = hcd->driver->check_bandwidth(hcd, udev);
1950reset:
1951 if (ret < 0)
1952 hcd->driver->reset_bandwidth(hcd, udev);
1953 return ret;
1954}
1955
1956/* Disables the endpoint: synchronizes with the hcd to make sure all
1957 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
1958 * have been called previously. Use for set_configuration, set_interface,
1959 * driver removal, physical disconnect.
1960 *
1961 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1962 * type, maxpacket size, toggle, halt status, and scheduling.
1963 */
1964void usb_hcd_disable_endpoint(struct usb_device *udev,
1965 struct usb_host_endpoint *ep)
1966{
1967 struct usb_hcd *hcd;
1968
1969 might_sleep();
1970 hcd = bus_to_hcd(udev->bus);
1971 if (hcd->driver->endpoint_disable)
1972 hcd->driver->endpoint_disable(hcd, ep);
1973}
1974
1975/**
1976 * usb_hcd_reset_endpoint - reset host endpoint state
1977 * @udev: USB device.
1978 * @ep: the endpoint to reset.
1979 *
1980 * Resets any host endpoint state such as the toggle bit, sequence
1981 * number and current window.
1982 */
1983void usb_hcd_reset_endpoint(struct usb_device *udev,
1984 struct usb_host_endpoint *ep)
1985{
1986 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
1987
1988 if (hcd->driver->endpoint_reset)
1989 hcd->driver->endpoint_reset(hcd, ep);
1990 else {
1991 int epnum = usb_endpoint_num(&ep->desc);
1992 int is_out = usb_endpoint_dir_out(&ep->desc);
1993 int is_control = usb_endpoint_xfer_control(&ep->desc);
1994
1995 usb_settoggle(udev, epnum, is_out, 0);
1996 if (is_control)
1997 usb_settoggle(udev, epnum, !is_out, 0);
1998 }
1999}
2000
2001/**
2002 * usb_alloc_streams - allocate bulk endpoint stream IDs.
2003 * @interface: alternate setting that includes all endpoints.
2004 * @eps: array of endpoints that need streams.
2005 * @num_eps: number of endpoints in the array.
2006 * @num_streams: number of streams to allocate.
2007 * @mem_flags: flags hcd should use to allocate memory.
2008 *
2009 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2010 * Drivers may queue multiple transfers to different stream IDs, which may
2011 * complete in a different order than they were queued.
2012 *
2013 * Return: On success, the number of allocated streams. On failure, a negative
2014 * error code.
2015 */
2016int usb_alloc_streams(struct usb_interface *interface,
2017 struct usb_host_endpoint **eps, unsigned int num_eps,
2018 unsigned int num_streams, gfp_t mem_flags)
2019{
2020 struct usb_hcd *hcd;
2021 struct usb_device *dev;
2022 int i, ret;
2023
2024 dev = interface_to_usbdev(interface);
2025 hcd = bus_to_hcd(dev->bus);
2026 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2027 return -EINVAL;
2028 if (dev->speed < USB_SPEED_SUPER)
2029 return -EINVAL;
2030 if (dev->state < USB_STATE_CONFIGURED)
2031 return -ENODEV;
2032
2033 for (i = 0; i < num_eps; i++) {
2034 /* Streams only apply to bulk endpoints. */
2035 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2036 return -EINVAL;
2037 /* Re-alloc is not allowed */
2038 if (eps[i]->streams)
2039 return -EINVAL;
2040 }
2041
2042 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2043 num_streams, mem_flags);
2044 if (ret < 0)
2045 return ret;
2046
2047 for (i = 0; i < num_eps; i++)
2048 eps[i]->streams = ret;
2049
2050 return ret;
2051}
2052EXPORT_SYMBOL_GPL(usb_alloc_streams);
2053
2054/**
2055 * usb_free_streams - free bulk endpoint stream IDs.
2056 * @interface: alternate setting that includes all endpoints.
2057 * @eps: array of endpoints to remove streams from.
2058 * @num_eps: number of endpoints in the array.
2059 * @mem_flags: flags hcd should use to allocate memory.
2060 *
2061 * Reverts a group of bulk endpoints back to not using stream IDs.
2062 * Can fail if we are given bad arguments, or HCD is broken.
2063 *
2064 * Return: 0 on success. On failure, a negative error code.
2065 */
2066int usb_free_streams(struct usb_interface *interface,
2067 struct usb_host_endpoint **eps, unsigned int num_eps,
2068 gfp_t mem_flags)
2069{
2070 struct usb_hcd *hcd;
2071 struct usb_device *dev;
2072 int i, ret;
2073
2074 dev = interface_to_usbdev(interface);
2075 hcd = bus_to_hcd(dev->bus);
2076 if (dev->speed < USB_SPEED_SUPER)
2077 return -EINVAL;
2078
2079 /* Double-free is not allowed */
2080 for (i = 0; i < num_eps; i++)
2081 if (!eps[i] || !eps[i]->streams)
2082 return -EINVAL;
2083
2084 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2085 if (ret < 0)
2086 return ret;
2087
2088 for (i = 0; i < num_eps; i++)
2089 eps[i]->streams = 0;
2090
2091 return ret;
2092}
2093EXPORT_SYMBOL_GPL(usb_free_streams);
2094
2095/* Protect against drivers that try to unlink URBs after the device
2096 * is gone, by waiting until all unlinks for @udev are finished.
2097 * Since we don't currently track URBs by device, simply wait until
2098 * nothing is running in the locked region of usb_hcd_unlink_urb().
2099 */
2100void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2101{
2102 spin_lock_irq(&hcd_urb_unlink_lock);
2103 spin_unlock_irq(&hcd_urb_unlink_lock);
2104}
2105
2106/*-------------------------------------------------------------------------*/
2107
2108/* called in any context */
2109int usb_hcd_get_frame_number (struct usb_device *udev)
2110{
2111 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2112
2113 if (!HCD_RH_RUNNING(hcd))
2114 return -ESHUTDOWN;
2115 return hcd->driver->get_frame_number (hcd);
2116}
2117
2118/*-------------------------------------------------------------------------*/
2119#ifdef CONFIG_USB_HCD_TEST_MODE
2120
2121static void usb_ehset_completion(struct urb *urb)
2122{
2123 struct completion *done = urb->context;
2124
2125 complete(done);
2126}
2127/*
2128 * Allocate and initialize a control URB. This request will be used by the
2129 * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
2130 * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
2131 * Return NULL if failed.
2132 */
2133static struct urb *request_single_step_set_feature_urb(
2134 struct usb_device *udev,
2135 void *dr,
2136 void *buf,
2137 struct completion *done)
2138{
2139 struct urb *urb;
2140 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2141
2142 urb = usb_alloc_urb(0, GFP_KERNEL);
2143 if (!urb)
2144 return NULL;
2145
2146 urb->pipe = usb_rcvctrlpipe(udev, 0);
2147
2148 urb->ep = &udev->ep0;
2149 urb->dev = udev;
2150 urb->setup_packet = (void *)dr;
2151 urb->transfer_buffer = buf;
2152 urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
2153 urb->complete = usb_ehset_completion;
2154 urb->status = -EINPROGRESS;
2155 urb->actual_length = 0;
2156 urb->transfer_flags = URB_DIR_IN;
2157 usb_get_urb(urb);
2158 atomic_inc(&urb->use_count);
2159 atomic_inc(&urb->dev->urbnum);
2160 if (map_urb_for_dma(hcd, urb, GFP_KERNEL)) {
2161 usb_put_urb(urb);
2162 usb_free_urb(urb);
2163 return NULL;
2164 }
2165
2166 urb->context = done;
2167 return urb;
2168}
2169
2170int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
2171{
2172 int retval = -ENOMEM;
2173 struct usb_ctrlrequest *dr;
2174 struct urb *urb;
2175 struct usb_device *udev;
2176 struct usb_device_descriptor *buf;
2177 DECLARE_COMPLETION_ONSTACK(done);
2178
2179 /* Obtain udev of the rhub's child port */
2180 udev = usb_hub_find_child(hcd->self.root_hub, port);
2181 if (!udev) {
2182 dev_err(hcd->self.controller, "No device attached to the RootHub\n");
2183 return -ENODEV;
2184 }
2185 buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
2186 if (!buf)
2187 return -ENOMEM;
2188
2189 dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
2190 if (!dr) {
2191 kfree(buf);
2192 return -ENOMEM;
2193 }
2194
2195 /* Fill Setup packet for GetDescriptor */
2196 dr->bRequestType = USB_DIR_IN;
2197 dr->bRequest = USB_REQ_GET_DESCRIPTOR;
2198 dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
2199 dr->wIndex = 0;
2200 dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
2201 urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
2202 if (!urb)
2203 goto cleanup;
2204
2205 /* Submit just the SETUP stage */
2206 retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 1);
2207 if (retval)
2208 goto out1;
2209 if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
2210 usb_kill_urb(urb);
2211 retval = -ETIMEDOUT;
2212 dev_err(hcd->self.controller,
2213 "%s SETUP stage timed out on ep0\n", __func__);
2214 goto out1;
2215 }
2216 msleep(15 * 1000);
2217
2218 /* Complete remaining DATA and STATUS stages using the same URB */
2219 urb->status = -EINPROGRESS;
2220 usb_get_urb(urb);
2221 atomic_inc(&urb->use_count);
2222 atomic_inc(&urb->dev->urbnum);
2223 retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 0);
2224 if (!retval && !wait_for_completion_timeout(&done,
2225 msecs_to_jiffies(2000))) {
2226 usb_kill_urb(urb);
2227 retval = -ETIMEDOUT;
2228 dev_err(hcd->self.controller,
2229 "%s IN stage timed out on ep0\n", __func__);
2230 }
2231out1:
2232 usb_free_urb(urb);
2233cleanup:
2234 kfree(dr);
2235 kfree(buf);
2236 return retval;
2237}
2238EXPORT_SYMBOL_GPL(ehset_single_step_set_feature);
2239#endif /* CONFIG_USB_HCD_TEST_MODE */
2240
2241/*-------------------------------------------------------------------------*/
2242
2243#ifdef CONFIG_PM
2244
2245int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2246{
2247 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2248 int status;
2249 int old_state = hcd->state;
2250
2251 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2252 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2253 rhdev->do_remote_wakeup);
2254 if (HCD_DEAD(hcd)) {
2255 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2256 return 0;
2257 }
2258
2259 if (!hcd->driver->bus_suspend) {
2260 status = -ENOENT;
2261 } else {
2262 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2263 hcd->state = HC_STATE_QUIESCING;
2264 status = hcd->driver->bus_suspend(hcd);
2265 }
2266 if (status == 0) {
2267 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2268 hcd->state = HC_STATE_SUSPENDED;
2269
2270 if (!PMSG_IS_AUTO(msg))
2271 usb_phy_roothub_suspend(hcd->self.sysdev,
2272 hcd->phy_roothub);
2273
2274 /* Did we race with a root-hub wakeup event? */
2275 if (rhdev->do_remote_wakeup) {
2276 char buffer[6];
2277
2278 status = hcd->driver->hub_status_data(hcd, buffer);
2279 if (status != 0) {
2280 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2281 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2282 status = -EBUSY;
2283 }
2284 }
2285 } else {
2286 spin_lock_irq(&hcd_root_hub_lock);
2287 if (!HCD_DEAD(hcd)) {
2288 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2289 hcd->state = old_state;
2290 }
2291 spin_unlock_irq(&hcd_root_hub_lock);
2292 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2293 "suspend", status);
2294 }
2295 return status;
2296}
2297
2298int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2299{
2300 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2301 int status;
2302 int old_state = hcd->state;
2303
2304 dev_dbg(&rhdev->dev, "usb %sresume\n",
2305 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2306 if (HCD_DEAD(hcd)) {
2307 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2308 return 0;
2309 }
2310
2311 if (!PMSG_IS_AUTO(msg)) {
2312 status = usb_phy_roothub_resume(hcd->self.sysdev,
2313 hcd->phy_roothub);
2314 if (status)
2315 return status;
2316 }
2317
2318 if (!hcd->driver->bus_resume)
2319 return -ENOENT;
2320 if (HCD_RH_RUNNING(hcd))
2321 return 0;
2322
2323 hcd->state = HC_STATE_RESUMING;
2324 status = hcd->driver->bus_resume(hcd);
2325 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2326 if (status == 0)
2327 status = usb_phy_roothub_calibrate(hcd->phy_roothub);
2328
2329 if (status == 0) {
2330 struct usb_device *udev;
2331 int port1;
2332
2333 spin_lock_irq(&hcd_root_hub_lock);
2334 if (!HCD_DEAD(hcd)) {
2335 usb_set_device_state(rhdev, rhdev->actconfig
2336 ? USB_STATE_CONFIGURED
2337 : USB_STATE_ADDRESS);
2338 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2339 hcd->state = HC_STATE_RUNNING;
2340 }
2341 spin_unlock_irq(&hcd_root_hub_lock);
2342
2343 /*
2344 * Check whether any of the enabled ports on the root hub are
2345 * unsuspended. If they are then a TRSMRCY delay is needed
2346 * (this is what the USB-2 spec calls a "global resume").
2347 * Otherwise we can skip the delay.
2348 */
2349 usb_hub_for_each_child(rhdev, port1, udev) {
2350 if (udev->state != USB_STATE_NOTATTACHED &&
2351 !udev->port_is_suspended) {
2352 usleep_range(10000, 11000); /* TRSMRCY */
2353 break;
2354 }
2355 }
2356 } else {
2357 hcd->state = old_state;
2358 usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
2359 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2360 "resume", status);
2361 if (status != -ESHUTDOWN)
2362 usb_hc_died(hcd);
2363 }
2364 return status;
2365}
2366
2367/* Workqueue routine for root-hub remote wakeup */
2368static void hcd_resume_work(struct work_struct *work)
2369{
2370 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2371 struct usb_device *udev = hcd->self.root_hub;
2372
2373 usb_remote_wakeup(udev);
2374}
2375
2376/**
2377 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2378 * @hcd: host controller for this root hub
2379 *
2380 * The USB host controller calls this function when its root hub is
2381 * suspended (with the remote wakeup feature enabled) and a remote
2382 * wakeup request is received. The routine submits a workqueue request
2383 * to resume the root hub (that is, manage its downstream ports again).
2384 */
2385void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2386{
2387 unsigned long flags;
2388
2389 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2390 if (hcd->rh_registered) {
2391 pm_wakeup_event(&hcd->self.root_hub->dev, 0);
2392 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2393 queue_work(pm_wq, &hcd->wakeup_work);
2394 }
2395 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2396}
2397EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2398
2399#endif /* CONFIG_PM */
2400
2401/*-------------------------------------------------------------------------*/
2402
2403#ifdef CONFIG_USB_OTG
2404
2405/**
2406 * usb_bus_start_enum - start immediate enumeration (for OTG)
2407 * @bus: the bus (must use hcd framework)
2408 * @port_num: 1-based number of port; usually bus->otg_port
2409 * Context: atomic
2410 *
2411 * Starts enumeration, with an immediate reset followed later by
2412 * hub_wq identifying and possibly configuring the device.
2413 * This is needed by OTG controller drivers, where it helps meet
2414 * HNP protocol timing requirements for starting a port reset.
2415 *
2416 * Return: 0 if successful.
2417 */
2418int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2419{
2420 struct usb_hcd *hcd;
2421 int status = -EOPNOTSUPP;
2422
2423 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2424 * boards with root hubs hooked up to internal devices (instead of
2425 * just the OTG port) may need more attention to resetting...
2426 */
2427 hcd = bus_to_hcd(bus);
2428 if (port_num && hcd->driver->start_port_reset)
2429 status = hcd->driver->start_port_reset(hcd, port_num);
2430
2431 /* allocate hub_wq shortly after (first) root port reset finishes;
2432 * it may issue others, until at least 50 msecs have passed.
2433 */
2434 if (status == 0)
2435 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2436 return status;
2437}
2438EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2439
2440#endif
2441
2442/*-------------------------------------------------------------------------*/
2443
2444/**
2445 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2446 * @irq: the IRQ being raised
2447 * @__hcd: pointer to the HCD whose IRQ is being signaled
2448 *
2449 * If the controller isn't HALTed, calls the driver's irq handler.
2450 * Checks whether the controller is now dead.
2451 *
2452 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2453 */
2454irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2455{
2456 struct usb_hcd *hcd = __hcd;
2457 irqreturn_t rc;
2458
2459 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2460 rc = IRQ_NONE;
2461 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2462 rc = IRQ_NONE;
2463 else
2464 rc = IRQ_HANDLED;
2465
2466 return rc;
2467}
2468EXPORT_SYMBOL_GPL(usb_hcd_irq);
2469
2470/*-------------------------------------------------------------------------*/
2471
2472/* Workqueue routine for when the root-hub has died. */
2473static void hcd_died_work(struct work_struct *work)
2474{
2475 struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work);
2476 static char *env[] = {
2477 "ERROR=DEAD",
2478 NULL
2479 };
2480
2481 /* Notify user space that the host controller has died */
2482 kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env);
2483}
2484
2485/**
2486 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2487 * @hcd: pointer to the HCD representing the controller
2488 *
2489 * This is called by bus glue to report a USB host controller that died
2490 * while operations may still have been pending. It's called automatically
2491 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2492 *
2493 * Only call this function with the primary HCD.
2494 */
2495void usb_hc_died (struct usb_hcd *hcd)
2496{
2497 unsigned long flags;
2498
2499 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2500
2501 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2502 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2503 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2504 if (hcd->rh_registered) {
2505 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2506
2507 /* make hub_wq clean up old urbs and devices */
2508 usb_set_device_state (hcd->self.root_hub,
2509 USB_STATE_NOTATTACHED);
2510 usb_kick_hub_wq(hcd->self.root_hub);
2511 }
2512 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2513 hcd = hcd->shared_hcd;
2514 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2515 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2516 if (hcd->rh_registered) {
2517 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2518
2519 /* make hub_wq clean up old urbs and devices */
2520 usb_set_device_state(hcd->self.root_hub,
2521 USB_STATE_NOTATTACHED);
2522 usb_kick_hub_wq(hcd->self.root_hub);
2523 }
2524 }
2525
2526 /* Handle the case where this function gets called with a shared HCD */
2527 if (usb_hcd_is_primary_hcd(hcd))
2528 schedule_work(&hcd->died_work);
2529 else
2530 schedule_work(&hcd->primary_hcd->died_work);
2531
2532 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2533 /* Make sure that the other roothub is also deallocated. */
2534}
2535EXPORT_SYMBOL_GPL (usb_hc_died);
2536
2537/*-------------------------------------------------------------------------*/
2538
2539static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2540{
2541
2542 spin_lock_init(&bh->lock);
2543 INIT_LIST_HEAD(&bh->head);
2544 INIT_WORK(&bh->bh, usb_giveback_urb_bh);
2545}
2546
2547struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
2548 struct device *sysdev, struct device *dev, const char *bus_name,
2549 struct usb_hcd *primary_hcd)
2550{
2551 struct usb_hcd *hcd;
2552
2553 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2554 if (!hcd)
2555 return NULL;
2556 if (primary_hcd == NULL) {
2557 hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
2558 GFP_KERNEL);
2559 if (!hcd->address0_mutex) {
2560 kfree(hcd);
2561 dev_dbg(dev, "hcd address0 mutex alloc failed\n");
2562 return NULL;
2563 }
2564 mutex_init(hcd->address0_mutex);
2565 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2566 GFP_KERNEL);
2567 if (!hcd->bandwidth_mutex) {
2568 kfree(hcd->address0_mutex);
2569 kfree(hcd);
2570 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2571 return NULL;
2572 }
2573 mutex_init(hcd->bandwidth_mutex);
2574 dev_set_drvdata(dev, hcd);
2575 } else {
2576 mutex_lock(&usb_port_peer_mutex);
2577 hcd->address0_mutex = primary_hcd->address0_mutex;
2578 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2579 hcd->primary_hcd = primary_hcd;
2580 primary_hcd->primary_hcd = primary_hcd;
2581 hcd->shared_hcd = primary_hcd;
2582 primary_hcd->shared_hcd = hcd;
2583 mutex_unlock(&usb_port_peer_mutex);
2584 }
2585
2586 kref_init(&hcd->kref);
2587
2588 usb_bus_init(&hcd->self);
2589 hcd->self.controller = dev;
2590 hcd->self.sysdev = sysdev;
2591 hcd->self.bus_name = bus_name;
2592
2593 timer_setup(&hcd->rh_timer, rh_timer_func, 0);
2594#ifdef CONFIG_PM
2595 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2596#endif
2597
2598 INIT_WORK(&hcd->died_work, hcd_died_work);
2599
2600 hcd->driver = driver;
2601 hcd->speed = driver->flags & HCD_MASK;
2602 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2603 "USB Host Controller";
2604 return hcd;
2605}
2606EXPORT_SYMBOL_GPL(__usb_create_hcd);
2607
2608/**
2609 * usb_create_shared_hcd - create and initialize an HCD structure
2610 * @driver: HC driver that will use this hcd
2611 * @dev: device for this HC, stored in hcd->self.controller
2612 * @bus_name: value to store in hcd->self.bus_name
2613 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2614 * PCI device. Only allocate certain resources for the primary HCD
2615 *
2616 * Context: task context, might sleep.
2617 *
2618 * Allocate a struct usb_hcd, with extra space at the end for the
2619 * HC driver's private data. Initialize the generic members of the
2620 * hcd structure.
2621 *
2622 * Return: On success, a pointer to the created and initialized HCD structure.
2623 * On failure (e.g. if memory is unavailable), %NULL.
2624 */
2625struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2626 struct device *dev, const char *bus_name,
2627 struct usb_hcd *primary_hcd)
2628{
2629 return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
2630}
2631EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2632
2633/**
2634 * usb_create_hcd - create and initialize an HCD structure
2635 * @driver: HC driver that will use this hcd
2636 * @dev: device for this HC, stored in hcd->self.controller
2637 * @bus_name: value to store in hcd->self.bus_name
2638 *
2639 * Context: task context, might sleep.
2640 *
2641 * Allocate a struct usb_hcd, with extra space at the end for the
2642 * HC driver's private data. Initialize the generic members of the
2643 * hcd structure.
2644 *
2645 * Return: On success, a pointer to the created and initialized HCD
2646 * structure. On failure (e.g. if memory is unavailable), %NULL.
2647 */
2648struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2649 struct device *dev, const char *bus_name)
2650{
2651 return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
2652}
2653EXPORT_SYMBOL_GPL(usb_create_hcd);
2654
2655/*
2656 * Roothubs that share one PCI device must also share the bandwidth mutex.
2657 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2658 * deallocated.
2659 *
2660 * Make sure to deallocate the bandwidth_mutex only when the last HCD is
2661 * freed. When hcd_release() is called for either hcd in a peer set,
2662 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
2663 */
2664static void hcd_release(struct kref *kref)
2665{
2666 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2667
2668 mutex_lock(&usb_port_peer_mutex);
2669 if (hcd->shared_hcd) {
2670 struct usb_hcd *peer = hcd->shared_hcd;
2671
2672 peer->shared_hcd = NULL;
2673 peer->primary_hcd = NULL;
2674 } else {
2675 kfree(hcd->address0_mutex);
2676 kfree(hcd->bandwidth_mutex);
2677 }
2678 mutex_unlock(&usb_port_peer_mutex);
2679 kfree(hcd);
2680}
2681
2682struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2683{
2684 if (hcd)
2685 kref_get (&hcd->kref);
2686 return hcd;
2687}
2688EXPORT_SYMBOL_GPL(usb_get_hcd);
2689
2690void usb_put_hcd (struct usb_hcd *hcd)
2691{
2692 if (hcd)
2693 kref_put (&hcd->kref, hcd_release);
2694}
2695EXPORT_SYMBOL_GPL(usb_put_hcd);
2696
2697int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2698{
2699 if (!hcd->primary_hcd)
2700 return 1;
2701 return hcd == hcd->primary_hcd;
2702}
2703EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2704
2705int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2706{
2707 if (!hcd->driver->find_raw_port_number)
2708 return port1;
2709
2710 return hcd->driver->find_raw_port_number(hcd, port1);
2711}
2712
2713static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2714 unsigned int irqnum, unsigned long irqflags)
2715{
2716 int retval;
2717
2718 if (hcd->driver->irq) {
2719
2720 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2721 hcd->driver->description, hcd->self.busnum);
2722 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2723 hcd->irq_descr, hcd);
2724 if (retval != 0) {
2725 dev_err(hcd->self.controller,
2726 "request interrupt %d failed\n",
2727 irqnum);
2728 return retval;
2729 }
2730 hcd->irq = irqnum;
2731 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2732 (hcd->driver->flags & HCD_MEMORY) ?
2733 "io mem" : "io port",
2734 (unsigned long long)hcd->rsrc_start);
2735 } else {
2736 hcd->irq = 0;
2737 if (hcd->rsrc_start)
2738 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2739 (hcd->driver->flags & HCD_MEMORY) ?
2740 "io mem" : "io port",
2741 (unsigned long long)hcd->rsrc_start);
2742 }
2743 return 0;
2744}
2745
2746/*
2747 * Before we free this root hub, flush in-flight peering attempts
2748 * and disable peer lookups
2749 */
2750static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2751{
2752 struct usb_device *rhdev;
2753
2754 mutex_lock(&usb_port_peer_mutex);
2755 rhdev = hcd->self.root_hub;
2756 hcd->self.root_hub = NULL;
2757 mutex_unlock(&usb_port_peer_mutex);
2758 usb_put_dev(rhdev);
2759}
2760
2761/**
2762 * usb_stop_hcd - Halt the HCD
2763 * @hcd: the usb_hcd that has to be halted
2764 *
2765 * Stop the root-hub polling timer and invoke the HCD's ->stop callback.
2766 */
2767static void usb_stop_hcd(struct usb_hcd *hcd)
2768{
2769 hcd->rh_pollable = 0;
2770 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2771 del_timer_sync(&hcd->rh_timer);
2772
2773 hcd->driver->stop(hcd);
2774 hcd->state = HC_STATE_HALT;
2775
2776 /* In case the HCD restarted the timer, stop it again. */
2777 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2778 del_timer_sync(&hcd->rh_timer);
2779}
2780
2781/**
2782 * usb_add_hcd - finish generic HCD structure initialization and register
2783 * @hcd: the usb_hcd structure to initialize
2784 * @irqnum: Interrupt line to allocate
2785 * @irqflags: Interrupt type flags
2786 *
2787 * Finish the remaining parts of generic HCD initialization: allocate the
2788 * buffers of consistent memory, register the bus, request the IRQ line,
2789 * and call the driver's reset() and start() routines.
2790 */
2791int usb_add_hcd(struct usb_hcd *hcd,
2792 unsigned int irqnum, unsigned long irqflags)
2793{
2794 int retval;
2795 struct usb_device *rhdev;
2796 struct usb_hcd *shared_hcd;
2797 int skip_phy_initialization;
2798
2799 if (usb_hcd_is_primary_hcd(hcd))
2800 skip_phy_initialization = hcd->skip_phy_initialization;
2801 else
2802 skip_phy_initialization = hcd->primary_hcd->skip_phy_initialization;
2803
2804 if (!skip_phy_initialization) {
2805 if (usb_hcd_is_primary_hcd(hcd)) {
2806 hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
2807 if (IS_ERR(hcd->phy_roothub))
2808 return PTR_ERR(hcd->phy_roothub);
2809 } else {
2810 hcd->phy_roothub = usb_phy_roothub_alloc_usb3_phy(hcd->self.sysdev);
2811 if (IS_ERR(hcd->phy_roothub))
2812 return PTR_ERR(hcd->phy_roothub);
2813 }
2814
2815 retval = usb_phy_roothub_init(hcd->phy_roothub);
2816 if (retval)
2817 return retval;
2818
2819 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2820 PHY_MODE_USB_HOST_SS);
2821 if (retval)
2822 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2823 PHY_MODE_USB_HOST);
2824 if (retval)
2825 goto err_usb_phy_roothub_power_on;
2826
2827 retval = usb_phy_roothub_power_on(hcd->phy_roothub);
2828 if (retval)
2829 goto err_usb_phy_roothub_power_on;
2830 }
2831
2832 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2833
2834 switch (authorized_default) {
2835 case USB_AUTHORIZE_NONE:
2836 hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
2837 break;
2838
2839 case USB_AUTHORIZE_INTERNAL:
2840 hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
2841 break;
2842
2843 case USB_AUTHORIZE_ALL:
2844 case USB_AUTHORIZE_WIRED:
2845 default:
2846 hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
2847 break;
2848 }
2849
2850 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2851
2852 /* per default all interfaces are authorized */
2853 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2854
2855 /* HC is in reset state, but accessible. Now do the one-time init,
2856 * bottom up so that hcds can customize the root hubs before hub_wq
2857 * starts talking to them. (Note, bus id is assigned early too.)
2858 */
2859 retval = hcd_buffer_create(hcd);
2860 if (retval != 0) {
2861 dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
2862 goto err_create_buf;
2863 }
2864
2865 retval = usb_register_bus(&hcd->self);
2866 if (retval < 0)
2867 goto err_register_bus;
2868
2869 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2870 if (rhdev == NULL) {
2871 dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
2872 retval = -ENOMEM;
2873 goto err_allocate_root_hub;
2874 }
2875 mutex_lock(&usb_port_peer_mutex);
2876 hcd->self.root_hub = rhdev;
2877 mutex_unlock(&usb_port_peer_mutex);
2878
2879 rhdev->rx_lanes = 1;
2880 rhdev->tx_lanes = 1;
2881 rhdev->ssp_rate = USB_SSP_GEN_UNKNOWN;
2882
2883 switch (hcd->speed) {
2884 case HCD_USB11:
2885 rhdev->speed = USB_SPEED_FULL;
2886 break;
2887 case HCD_USB2:
2888 rhdev->speed = USB_SPEED_HIGH;
2889 break;
2890 case HCD_USB3:
2891 rhdev->speed = USB_SPEED_SUPER;
2892 break;
2893 case HCD_USB32:
2894 rhdev->rx_lanes = 2;
2895 rhdev->tx_lanes = 2;
2896 rhdev->ssp_rate = USB_SSP_GEN_2x2;
2897 rhdev->speed = USB_SPEED_SUPER_PLUS;
2898 break;
2899 case HCD_USB31:
2900 rhdev->ssp_rate = USB_SSP_GEN_2x1;
2901 rhdev->speed = USB_SPEED_SUPER_PLUS;
2902 break;
2903 default:
2904 retval = -EINVAL;
2905 goto err_set_rh_speed;
2906 }
2907
2908 /* wakeup flag init defaults to "everything works" for root hubs,
2909 * but drivers can override it in reset() if needed, along with
2910 * recording the overall controller's system wakeup capability.
2911 */
2912 device_set_wakeup_capable(&rhdev->dev, 1);
2913
2914 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2915 * registered. But since the controller can die at any time,
2916 * let's initialize the flag before touching the hardware.
2917 */
2918 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2919
2920 /* "reset" is misnamed; its role is now one-time init. the controller
2921 * should already have been reset (and boot firmware kicked off etc).
2922 */
2923 if (hcd->driver->reset) {
2924 retval = hcd->driver->reset(hcd);
2925 if (retval < 0) {
2926 dev_err(hcd->self.controller, "can't setup: %d\n",
2927 retval);
2928 goto err_hcd_driver_setup;
2929 }
2930 }
2931 hcd->rh_pollable = 1;
2932
2933 retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
2934 if (retval)
2935 goto err_hcd_driver_setup;
2936
2937 /* NOTE: root hub and controller capabilities may not be the same */
2938 if (device_can_wakeup(hcd->self.controller)
2939 && device_can_wakeup(&hcd->self.root_hub->dev))
2940 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2941
2942 /* initialize BHs */
2943 init_giveback_urb_bh(&hcd->high_prio_bh);
2944 hcd->high_prio_bh.high_prio = true;
2945 init_giveback_urb_bh(&hcd->low_prio_bh);
2946
2947 /* enable irqs just before we start the controller,
2948 * if the BIOS provides legacy PCI irqs.
2949 */
2950 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2951 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2952 if (retval)
2953 goto err_request_irq;
2954 }
2955
2956 hcd->state = HC_STATE_RUNNING;
2957 retval = hcd->driver->start(hcd);
2958 if (retval < 0) {
2959 dev_err(hcd->self.controller, "startup error %d\n", retval);
2960 goto err_hcd_driver_start;
2961 }
2962
2963 /* starting here, usbcore will pay attention to the shared HCD roothub */
2964 shared_hcd = hcd->shared_hcd;
2965 if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) {
2966 retval = register_root_hub(shared_hcd);
2967 if (retval != 0)
2968 goto err_register_root_hub;
2969
2970 if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd))
2971 usb_hcd_poll_rh_status(shared_hcd);
2972 }
2973
2974 /* starting here, usbcore will pay attention to this root hub */
2975 if (!HCD_DEFER_RH_REGISTER(hcd)) {
2976 retval = register_root_hub(hcd);
2977 if (retval != 0)
2978 goto err_register_root_hub;
2979
2980 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2981 usb_hcd_poll_rh_status(hcd);
2982 }
2983
2984 return retval;
2985
2986err_register_root_hub:
2987 usb_stop_hcd(hcd);
2988err_hcd_driver_start:
2989 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2990 free_irq(irqnum, hcd);
2991err_request_irq:
2992err_hcd_driver_setup:
2993err_set_rh_speed:
2994 usb_put_invalidate_rhdev(hcd);
2995err_allocate_root_hub:
2996 usb_deregister_bus(&hcd->self);
2997err_register_bus:
2998 hcd_buffer_destroy(hcd);
2999err_create_buf:
3000 usb_phy_roothub_power_off(hcd->phy_roothub);
3001err_usb_phy_roothub_power_on:
3002 usb_phy_roothub_exit(hcd->phy_roothub);
3003
3004 return retval;
3005}
3006EXPORT_SYMBOL_GPL(usb_add_hcd);
3007
3008/**
3009 * usb_remove_hcd - shutdown processing for generic HCDs
3010 * @hcd: the usb_hcd structure to remove
3011 *
3012 * Context: task context, might sleep.
3013 *
3014 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
3015 * invoking the HCD's stop() method.
3016 */
3017void usb_remove_hcd(struct usb_hcd *hcd)
3018{
3019 struct usb_device *rhdev;
3020 bool rh_registered;
3021
3022 if (!hcd) {
3023 pr_debug("%s: hcd is NULL\n", __func__);
3024 return;
3025 }
3026 rhdev = hcd->self.root_hub;
3027
3028 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
3029
3030 usb_get_dev(rhdev);
3031 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
3032 if (HC_IS_RUNNING (hcd->state))
3033 hcd->state = HC_STATE_QUIESCING;
3034
3035 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
3036 spin_lock_irq (&hcd_root_hub_lock);
3037 rh_registered = hcd->rh_registered;
3038 hcd->rh_registered = 0;
3039 spin_unlock_irq (&hcd_root_hub_lock);
3040
3041#ifdef CONFIG_PM
3042 cancel_work_sync(&hcd->wakeup_work);
3043#endif
3044 cancel_work_sync(&hcd->died_work);
3045
3046 mutex_lock(&usb_bus_idr_lock);
3047 if (rh_registered)
3048 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
3049 mutex_unlock(&usb_bus_idr_lock);
3050
3051 /*
3052 * flush_work() isn't needed here because:
3053 * - driver's disconnect() called from usb_disconnect() should
3054 * make sure its URBs are completed during the disconnect()
3055 * callback
3056 *
3057 * - it is too late to run complete() here since driver may have
3058 * been removed already now
3059 */
3060
3061 /* Prevent any more root-hub status calls from the timer.
3062 * The HCD might still restart the timer (if a port status change
3063 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
3064 * the hub_status_data() callback.
3065 */
3066 usb_stop_hcd(hcd);
3067
3068 if (usb_hcd_is_primary_hcd(hcd)) {
3069 if (hcd->irq > 0)
3070 free_irq(hcd->irq, hcd);
3071 }
3072
3073 usb_deregister_bus(&hcd->self);
3074 hcd_buffer_destroy(hcd);
3075
3076 usb_phy_roothub_power_off(hcd->phy_roothub);
3077 usb_phy_roothub_exit(hcd->phy_roothub);
3078
3079 usb_put_invalidate_rhdev(hcd);
3080 hcd->flags = 0;
3081}
3082EXPORT_SYMBOL_GPL(usb_remove_hcd);
3083
3084void
3085usb_hcd_platform_shutdown(struct platform_device *dev)
3086{
3087 struct usb_hcd *hcd = platform_get_drvdata(dev);
3088
3089 /* No need for pm_runtime_put(), we're shutting down */
3090 pm_runtime_get_sync(&dev->dev);
3091
3092 if (hcd->driver->shutdown)
3093 hcd->driver->shutdown(hcd);
3094}
3095EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
3096
3097int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
3098 dma_addr_t dma, size_t size)
3099{
3100 int err;
3101 void *local_mem;
3102
3103 hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4,
3104 dev_to_node(hcd->self.sysdev),
3105 dev_name(hcd->self.sysdev));
3106 if (IS_ERR(hcd->localmem_pool))
3107 return PTR_ERR(hcd->localmem_pool);
3108
3109 /*
3110 * if a physical SRAM address was passed, map it, otherwise
3111 * allocate system memory as a buffer.
3112 */
3113 if (phys_addr)
3114 local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
3115 size, MEMREMAP_WC);
3116 else
3117 local_mem = dmam_alloc_attrs(hcd->self.sysdev, size, &dma,
3118 GFP_KERNEL,
3119 DMA_ATTR_WRITE_COMBINE);
3120
3121 if (IS_ERR_OR_NULL(local_mem)) {
3122 if (!local_mem)
3123 return -ENOMEM;
3124
3125 return PTR_ERR(local_mem);
3126 }
3127
3128 /*
3129 * Here we pass a dma_addr_t but the arg type is a phys_addr_t.
3130 * It's not backed by system memory and thus there's no kernel mapping
3131 * for it.
3132 */
3133 err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem,
3134 dma, size, dev_to_node(hcd->self.sysdev));
3135 if (err < 0) {
3136 dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n",
3137 err);
3138 return err;
3139 }
3140
3141 return 0;
3142}
3143EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem);
3144
3145/*-------------------------------------------------------------------------*/
3146
3147#if IS_ENABLED(CONFIG_USB_MON)
3148
3149const struct usb_mon_operations *mon_ops;
3150
3151/*
3152 * The registration is unlocked.
3153 * We do it this way because we do not want to lock in hot paths.
3154 *
3155 * Notice that the code is minimally error-proof. Because usbmon needs
3156 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
3157 */
3158
3159int usb_mon_register(const struct usb_mon_operations *ops)
3160{
3161
3162 if (mon_ops)
3163 return -EBUSY;
3164
3165 mon_ops = ops;
3166 mb();
3167 return 0;
3168}
3169EXPORT_SYMBOL_GPL (usb_mon_register);
3170
3171void usb_mon_deregister (void)
3172{
3173
3174 if (mon_ops == NULL) {
3175 printk(KERN_ERR "USB: monitor was not registered\n");
3176 return;
3177 }
3178 mon_ops = NULL;
3179 mb();
3180}
3181EXPORT_SYMBOL_GPL (usb_mon_deregister);
3182
3183#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright Linus Torvalds 1999
4 * (C) Copyright Johannes Erdfelt 1999-2001
5 * (C) Copyright Andreas Gal 1999
6 * (C) Copyright Gregory P. Smith 1999
7 * (C) Copyright Deti Fliegl 1999
8 * (C) Copyright Randy Dunlap 2000
9 * (C) Copyright David Brownell 2000-2002
10 */
11
12#include <linux/bcd.h>
13#include <linux/module.h>
14#include <linux/version.h>
15#include <linux/kernel.h>
16#include <linux/sched/task_stack.h>
17#include <linux/slab.h>
18#include <linux/completion.h>
19#include <linux/utsname.h>
20#include <linux/mm.h>
21#include <asm/io.h>
22#include <linux/device.h>
23#include <linux/dma-mapping.h>
24#include <linux/mutex.h>
25#include <asm/irq.h>
26#include <asm/byteorder.h>
27#include <asm/unaligned.h>
28#include <linux/platform_device.h>
29#include <linux/workqueue.h>
30#include <linux/pm_runtime.h>
31#include <linux/types.h>
32#include <linux/genalloc.h>
33#include <linux/io.h>
34
35#include <linux/phy/phy.h>
36#include <linux/usb.h>
37#include <linux/usb/hcd.h>
38#include <linux/usb/otg.h>
39
40#include "usb.h"
41#include "phy.h"
42
43
44/*-------------------------------------------------------------------------*/
45
46/*
47 * USB Host Controller Driver framework
48 *
49 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
50 * HCD-specific behaviors/bugs.
51 *
52 * This does error checks, tracks devices and urbs, and delegates to a
53 * "hc_driver" only for code (and data) that really needs to know about
54 * hardware differences. That includes root hub registers, i/o queues,
55 * and so on ... but as little else as possible.
56 *
57 * Shared code includes most of the "root hub" code (these are emulated,
58 * though each HC's hardware works differently) and PCI glue, plus request
59 * tracking overhead. The HCD code should only block on spinlocks or on
60 * hardware handshaking; blocking on software events (such as other kernel
61 * threads releasing resources, or completing actions) is all generic.
62 *
63 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
64 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
65 * only by the hub driver ... and that neither should be seen or used by
66 * usb client device drivers.
67 *
68 * Contributors of ideas or unattributed patches include: David Brownell,
69 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
70 *
71 * HISTORY:
72 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
73 * associated cleanup. "usb_hcd" still != "usb_bus".
74 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
75 */
76
77/*-------------------------------------------------------------------------*/
78
79/* Keep track of which host controller drivers are loaded */
80unsigned long usb_hcds_loaded;
81EXPORT_SYMBOL_GPL(usb_hcds_loaded);
82
83/* host controllers we manage */
84DEFINE_IDR (usb_bus_idr);
85EXPORT_SYMBOL_GPL (usb_bus_idr);
86
87/* used when allocating bus numbers */
88#define USB_MAXBUS 64
89
90/* used when updating list of hcds */
91DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
92EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
93
94/* used for controlling access to virtual root hubs */
95static DEFINE_SPINLOCK(hcd_root_hub_lock);
96
97/* used when updating an endpoint's URB list */
98static DEFINE_SPINLOCK(hcd_urb_list_lock);
99
100/* used to protect against unlinking URBs after the device is gone */
101static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
102
103/* wait queue for synchronous unlinks */
104DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
105
106/*-------------------------------------------------------------------------*/
107
108/*
109 * Sharable chunks of root hub code.
110 */
111
112/*-------------------------------------------------------------------------*/
113#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
114#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
115
116/* usb 3.1 root hub device descriptor */
117static const u8 usb31_rh_dev_descriptor[18] = {
118 0x12, /* __u8 bLength; */
119 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
120 0x10, 0x03, /* __le16 bcdUSB; v3.1 */
121
122 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
123 0x00, /* __u8 bDeviceSubClass; */
124 0x03, /* __u8 bDeviceProtocol; USB 3 hub */
125 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
126
127 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
128 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
129 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
130
131 0x03, /* __u8 iManufacturer; */
132 0x02, /* __u8 iProduct; */
133 0x01, /* __u8 iSerialNumber; */
134 0x01 /* __u8 bNumConfigurations; */
135};
136
137/* usb 3.0 root hub device descriptor */
138static const u8 usb3_rh_dev_descriptor[18] = {
139 0x12, /* __u8 bLength; */
140 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
141 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
142
143 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
144 0x00, /* __u8 bDeviceSubClass; */
145 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
146 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
147
148 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
149 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
150 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
151
152 0x03, /* __u8 iManufacturer; */
153 0x02, /* __u8 iProduct; */
154 0x01, /* __u8 iSerialNumber; */
155 0x01 /* __u8 bNumConfigurations; */
156};
157
158/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
159static const u8 usb25_rh_dev_descriptor[18] = {
160 0x12, /* __u8 bLength; */
161 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
162 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
163
164 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
165 0x00, /* __u8 bDeviceSubClass; */
166 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
167 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
168
169 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
170 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
171 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
172
173 0x03, /* __u8 iManufacturer; */
174 0x02, /* __u8 iProduct; */
175 0x01, /* __u8 iSerialNumber; */
176 0x01 /* __u8 bNumConfigurations; */
177};
178
179/* usb 2.0 root hub device descriptor */
180static const u8 usb2_rh_dev_descriptor[18] = {
181 0x12, /* __u8 bLength; */
182 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
183 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
184
185 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
186 0x00, /* __u8 bDeviceSubClass; */
187 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
188 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
189
190 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
191 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
192 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
193
194 0x03, /* __u8 iManufacturer; */
195 0x02, /* __u8 iProduct; */
196 0x01, /* __u8 iSerialNumber; */
197 0x01 /* __u8 bNumConfigurations; */
198};
199
200/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
201
202/* usb 1.1 root hub device descriptor */
203static const u8 usb11_rh_dev_descriptor[18] = {
204 0x12, /* __u8 bLength; */
205 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
206 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
207
208 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
209 0x00, /* __u8 bDeviceSubClass; */
210 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
211 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
212
213 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
214 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
215 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
216
217 0x03, /* __u8 iManufacturer; */
218 0x02, /* __u8 iProduct; */
219 0x01, /* __u8 iSerialNumber; */
220 0x01 /* __u8 bNumConfigurations; */
221};
222
223
224/*-------------------------------------------------------------------------*/
225
226/* Configuration descriptors for our root hubs */
227
228static const u8 fs_rh_config_descriptor[] = {
229
230 /* one configuration */
231 0x09, /* __u8 bLength; */
232 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
233 0x19, 0x00, /* __le16 wTotalLength; */
234 0x01, /* __u8 bNumInterfaces; (1) */
235 0x01, /* __u8 bConfigurationValue; */
236 0x00, /* __u8 iConfiguration; */
237 0xc0, /* __u8 bmAttributes;
238 Bit 7: must be set,
239 6: Self-powered,
240 5: Remote wakeup,
241 4..0: resvd */
242 0x00, /* __u8 MaxPower; */
243
244 /* USB 1.1:
245 * USB 2.0, single TT organization (mandatory):
246 * one interface, protocol 0
247 *
248 * USB 2.0, multiple TT organization (optional):
249 * two interfaces, protocols 1 (like single TT)
250 * and 2 (multiple TT mode) ... config is
251 * sometimes settable
252 * NOT IMPLEMENTED
253 */
254
255 /* one interface */
256 0x09, /* __u8 if_bLength; */
257 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
258 0x00, /* __u8 if_bInterfaceNumber; */
259 0x00, /* __u8 if_bAlternateSetting; */
260 0x01, /* __u8 if_bNumEndpoints; */
261 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
262 0x00, /* __u8 if_bInterfaceSubClass; */
263 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
264 0x00, /* __u8 if_iInterface; */
265
266 /* one endpoint (status change endpoint) */
267 0x07, /* __u8 ep_bLength; */
268 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
269 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
270 0x03, /* __u8 ep_bmAttributes; Interrupt */
271 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
272 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
273};
274
275static const u8 hs_rh_config_descriptor[] = {
276
277 /* one configuration */
278 0x09, /* __u8 bLength; */
279 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
280 0x19, 0x00, /* __le16 wTotalLength; */
281 0x01, /* __u8 bNumInterfaces; (1) */
282 0x01, /* __u8 bConfigurationValue; */
283 0x00, /* __u8 iConfiguration; */
284 0xc0, /* __u8 bmAttributes;
285 Bit 7: must be set,
286 6: Self-powered,
287 5: Remote wakeup,
288 4..0: resvd */
289 0x00, /* __u8 MaxPower; */
290
291 /* USB 1.1:
292 * USB 2.0, single TT organization (mandatory):
293 * one interface, protocol 0
294 *
295 * USB 2.0, multiple TT organization (optional):
296 * two interfaces, protocols 1 (like single TT)
297 * and 2 (multiple TT mode) ... config is
298 * sometimes settable
299 * NOT IMPLEMENTED
300 */
301
302 /* one interface */
303 0x09, /* __u8 if_bLength; */
304 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
305 0x00, /* __u8 if_bInterfaceNumber; */
306 0x00, /* __u8 if_bAlternateSetting; */
307 0x01, /* __u8 if_bNumEndpoints; */
308 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
309 0x00, /* __u8 if_bInterfaceSubClass; */
310 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
311 0x00, /* __u8 if_iInterface; */
312
313 /* one endpoint (status change endpoint) */
314 0x07, /* __u8 ep_bLength; */
315 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
316 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
317 0x03, /* __u8 ep_bmAttributes; Interrupt */
318 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
319 * see hub.c:hub_configure() for details. */
320 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
321 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
322};
323
324static const u8 ss_rh_config_descriptor[] = {
325 /* one configuration */
326 0x09, /* __u8 bLength; */
327 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
328 0x1f, 0x00, /* __le16 wTotalLength; */
329 0x01, /* __u8 bNumInterfaces; (1) */
330 0x01, /* __u8 bConfigurationValue; */
331 0x00, /* __u8 iConfiguration; */
332 0xc0, /* __u8 bmAttributes;
333 Bit 7: must be set,
334 6: Self-powered,
335 5: Remote wakeup,
336 4..0: resvd */
337 0x00, /* __u8 MaxPower; */
338
339 /* one interface */
340 0x09, /* __u8 if_bLength; */
341 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
342 0x00, /* __u8 if_bInterfaceNumber; */
343 0x00, /* __u8 if_bAlternateSetting; */
344 0x01, /* __u8 if_bNumEndpoints; */
345 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
346 0x00, /* __u8 if_bInterfaceSubClass; */
347 0x00, /* __u8 if_bInterfaceProtocol; */
348 0x00, /* __u8 if_iInterface; */
349
350 /* one endpoint (status change endpoint) */
351 0x07, /* __u8 ep_bLength; */
352 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
353 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
354 0x03, /* __u8 ep_bmAttributes; Interrupt */
355 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
356 * see hub.c:hub_configure() for details. */
357 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
358 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
359
360 /* one SuperSpeed endpoint companion descriptor */
361 0x06, /* __u8 ss_bLength */
362 USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
363 /* Companion */
364 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
365 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
366 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
367};
368
369/* authorized_default behaviour:
370 * -1 is authorized for all devices except wireless (old behaviour)
371 * 0 is unauthorized for all devices
372 * 1 is authorized for all devices
373 * 2 is authorized for internal devices
374 */
375#define USB_AUTHORIZE_WIRED -1
376#define USB_AUTHORIZE_NONE 0
377#define USB_AUTHORIZE_ALL 1
378#define USB_AUTHORIZE_INTERNAL 2
379
380static int authorized_default = USB_AUTHORIZE_WIRED;
381module_param(authorized_default, int, S_IRUGO|S_IWUSR);
382MODULE_PARM_DESC(authorized_default,
383 "Default USB device authorization: 0 is not authorized, 1 is "
384 "authorized, 2 is authorized for internal devices, -1 is "
385 "authorized except for wireless USB (default, old behaviour)");
386/*-------------------------------------------------------------------------*/
387
388/**
389 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
390 * @s: Null-terminated ASCII (actually ISO-8859-1) string
391 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
392 * @len: Length (in bytes; may be odd) of descriptor buffer.
393 *
394 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
395 * whichever is less.
396 *
397 * Note:
398 * USB String descriptors can contain at most 126 characters; input
399 * strings longer than that are truncated.
400 */
401static unsigned
402ascii2desc(char const *s, u8 *buf, unsigned len)
403{
404 unsigned n, t = 2 + 2*strlen(s);
405
406 if (t > 254)
407 t = 254; /* Longest possible UTF string descriptor */
408 if (len > t)
409 len = t;
410
411 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
412
413 n = len;
414 while (n--) {
415 *buf++ = t;
416 if (!n--)
417 break;
418 *buf++ = t >> 8;
419 t = (unsigned char)*s++;
420 }
421 return len;
422}
423
424/**
425 * rh_string() - provides string descriptors for root hub
426 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
427 * @hcd: the host controller for this root hub
428 * @data: buffer for output packet
429 * @len: length of the provided buffer
430 *
431 * Produces either a manufacturer, product or serial number string for the
432 * virtual root hub device.
433 *
434 * Return: The number of bytes filled in: the length of the descriptor or
435 * of the provided buffer, whichever is less.
436 */
437static unsigned
438rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
439{
440 char buf[100];
441 char const *s;
442 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
443
444 /* language ids */
445 switch (id) {
446 case 0:
447 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
448 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
449 if (len > 4)
450 len = 4;
451 memcpy(data, langids, len);
452 return len;
453 case 1:
454 /* Serial number */
455 s = hcd->self.bus_name;
456 break;
457 case 2:
458 /* Product name */
459 s = hcd->product_desc;
460 break;
461 case 3:
462 /* Manufacturer */
463 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
464 init_utsname()->release, hcd->driver->description);
465 s = buf;
466 break;
467 default:
468 /* Can't happen; caller guarantees it */
469 return 0;
470 }
471
472 return ascii2desc(s, data, len);
473}
474
475
476/* Root hub control transfers execute synchronously */
477static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
478{
479 struct usb_ctrlrequest *cmd;
480 u16 typeReq, wValue, wIndex, wLength;
481 u8 *ubuf = urb->transfer_buffer;
482 unsigned len = 0;
483 int status;
484 u8 patch_wakeup = 0;
485 u8 patch_protocol = 0;
486 u16 tbuf_size;
487 u8 *tbuf = NULL;
488 const u8 *bufp;
489
490 might_sleep();
491
492 spin_lock_irq(&hcd_root_hub_lock);
493 status = usb_hcd_link_urb_to_ep(hcd, urb);
494 spin_unlock_irq(&hcd_root_hub_lock);
495 if (status)
496 return status;
497 urb->hcpriv = hcd; /* Indicate it's queued */
498
499 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
500 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
501 wValue = le16_to_cpu (cmd->wValue);
502 wIndex = le16_to_cpu (cmd->wIndex);
503 wLength = le16_to_cpu (cmd->wLength);
504
505 if (wLength > urb->transfer_buffer_length)
506 goto error;
507
508 /*
509 * tbuf should be at least as big as the
510 * USB hub descriptor.
511 */
512 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
513 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
514 if (!tbuf) {
515 status = -ENOMEM;
516 goto err_alloc;
517 }
518
519 bufp = tbuf;
520
521
522 urb->actual_length = 0;
523 switch (typeReq) {
524
525 /* DEVICE REQUESTS */
526
527 /* The root hub's remote wakeup enable bit is implemented using
528 * driver model wakeup flags. If this system supports wakeup
529 * through USB, userspace may change the default "allow wakeup"
530 * policy through sysfs or these calls.
531 *
532 * Most root hubs support wakeup from downstream devices, for
533 * runtime power management (disabling USB clocks and reducing
534 * VBUS power usage). However, not all of them do so; silicon,
535 * board, and BIOS bugs here are not uncommon, so these can't
536 * be treated quite like external hubs.
537 *
538 * Likewise, not all root hubs will pass wakeup events upstream,
539 * to wake up the whole system. So don't assume root hub and
540 * controller capabilities are identical.
541 */
542
543 case DeviceRequest | USB_REQ_GET_STATUS:
544 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
545 << USB_DEVICE_REMOTE_WAKEUP)
546 | (1 << USB_DEVICE_SELF_POWERED);
547 tbuf[1] = 0;
548 len = 2;
549 break;
550 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
551 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
552 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
553 else
554 goto error;
555 break;
556 case DeviceOutRequest | USB_REQ_SET_FEATURE:
557 if (device_can_wakeup(&hcd->self.root_hub->dev)
558 && wValue == USB_DEVICE_REMOTE_WAKEUP)
559 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
560 else
561 goto error;
562 break;
563 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
564 tbuf[0] = 1;
565 len = 1;
566 /* FALLTHROUGH */
567 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
568 break;
569 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
570 switch (wValue & 0xff00) {
571 case USB_DT_DEVICE << 8:
572 switch (hcd->speed) {
573 case HCD_USB32:
574 case HCD_USB31:
575 bufp = usb31_rh_dev_descriptor;
576 break;
577 case HCD_USB3:
578 bufp = usb3_rh_dev_descriptor;
579 break;
580 case HCD_USB25:
581 bufp = usb25_rh_dev_descriptor;
582 break;
583 case HCD_USB2:
584 bufp = usb2_rh_dev_descriptor;
585 break;
586 case HCD_USB11:
587 bufp = usb11_rh_dev_descriptor;
588 break;
589 default:
590 goto error;
591 }
592 len = 18;
593 if (hcd->has_tt)
594 patch_protocol = 1;
595 break;
596 case USB_DT_CONFIG << 8:
597 switch (hcd->speed) {
598 case HCD_USB32:
599 case HCD_USB31:
600 case HCD_USB3:
601 bufp = ss_rh_config_descriptor;
602 len = sizeof ss_rh_config_descriptor;
603 break;
604 case HCD_USB25:
605 case HCD_USB2:
606 bufp = hs_rh_config_descriptor;
607 len = sizeof hs_rh_config_descriptor;
608 break;
609 case HCD_USB11:
610 bufp = fs_rh_config_descriptor;
611 len = sizeof fs_rh_config_descriptor;
612 break;
613 default:
614 goto error;
615 }
616 if (device_can_wakeup(&hcd->self.root_hub->dev))
617 patch_wakeup = 1;
618 break;
619 case USB_DT_STRING << 8:
620 if ((wValue & 0xff) < 4)
621 urb->actual_length = rh_string(wValue & 0xff,
622 hcd, ubuf, wLength);
623 else /* unsupported IDs --> "protocol stall" */
624 goto error;
625 break;
626 case USB_DT_BOS << 8:
627 goto nongeneric;
628 default:
629 goto error;
630 }
631 break;
632 case DeviceRequest | USB_REQ_GET_INTERFACE:
633 tbuf[0] = 0;
634 len = 1;
635 /* FALLTHROUGH */
636 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
637 break;
638 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
639 /* wValue == urb->dev->devaddr */
640 dev_dbg (hcd->self.controller, "root hub device address %d\n",
641 wValue);
642 break;
643
644 /* INTERFACE REQUESTS (no defined feature/status flags) */
645
646 /* ENDPOINT REQUESTS */
647
648 case EndpointRequest | USB_REQ_GET_STATUS:
649 /* ENDPOINT_HALT flag */
650 tbuf[0] = 0;
651 tbuf[1] = 0;
652 len = 2;
653 /* FALLTHROUGH */
654 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
655 case EndpointOutRequest | USB_REQ_SET_FEATURE:
656 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
657 break;
658
659 /* CLASS REQUESTS (and errors) */
660
661 default:
662nongeneric:
663 /* non-generic request */
664 switch (typeReq) {
665 case GetHubStatus:
666 len = 4;
667 break;
668 case GetPortStatus:
669 if (wValue == HUB_PORT_STATUS)
670 len = 4;
671 else
672 /* other port status types return 8 bytes */
673 len = 8;
674 break;
675 case GetHubDescriptor:
676 len = sizeof (struct usb_hub_descriptor);
677 break;
678 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
679 /* len is returned by hub_control */
680 break;
681 }
682 status = hcd->driver->hub_control (hcd,
683 typeReq, wValue, wIndex,
684 tbuf, wLength);
685
686 if (typeReq == GetHubDescriptor)
687 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
688 (struct usb_hub_descriptor *)tbuf);
689 break;
690error:
691 /* "protocol stall" on error */
692 status = -EPIPE;
693 }
694
695 if (status < 0) {
696 len = 0;
697 if (status != -EPIPE) {
698 dev_dbg (hcd->self.controller,
699 "CTRL: TypeReq=0x%x val=0x%x "
700 "idx=0x%x len=%d ==> %d\n",
701 typeReq, wValue, wIndex,
702 wLength, status);
703 }
704 } else if (status > 0) {
705 /* hub_control may return the length of data copied. */
706 len = status;
707 status = 0;
708 }
709 if (len) {
710 if (urb->transfer_buffer_length < len)
711 len = urb->transfer_buffer_length;
712 urb->actual_length = len;
713 /* always USB_DIR_IN, toward host */
714 memcpy (ubuf, bufp, len);
715
716 /* report whether RH hardware supports remote wakeup */
717 if (patch_wakeup &&
718 len > offsetof (struct usb_config_descriptor,
719 bmAttributes))
720 ((struct usb_config_descriptor *)ubuf)->bmAttributes
721 |= USB_CONFIG_ATT_WAKEUP;
722
723 /* report whether RH hardware has an integrated TT */
724 if (patch_protocol &&
725 len > offsetof(struct usb_device_descriptor,
726 bDeviceProtocol))
727 ((struct usb_device_descriptor *) ubuf)->
728 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
729 }
730
731 kfree(tbuf);
732 err_alloc:
733
734 /* any errors get returned through the urb completion */
735 spin_lock_irq(&hcd_root_hub_lock);
736 usb_hcd_unlink_urb_from_ep(hcd, urb);
737 usb_hcd_giveback_urb(hcd, urb, status);
738 spin_unlock_irq(&hcd_root_hub_lock);
739 return 0;
740}
741
742/*-------------------------------------------------------------------------*/
743
744/*
745 * Root Hub interrupt transfers are polled using a timer if the
746 * driver requests it; otherwise the driver is responsible for
747 * calling usb_hcd_poll_rh_status() when an event occurs.
748 *
749 * Completions are called in_interrupt(), but they may or may not
750 * be in_irq().
751 */
752void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
753{
754 struct urb *urb;
755 int length;
756 unsigned long flags;
757 char buffer[6]; /* Any root hubs with > 31 ports? */
758
759 if (unlikely(!hcd->rh_pollable))
760 return;
761 if (!hcd->uses_new_polling && !hcd->status_urb)
762 return;
763
764 length = hcd->driver->hub_status_data(hcd, buffer);
765 if (length > 0) {
766
767 /* try to complete the status urb */
768 spin_lock_irqsave(&hcd_root_hub_lock, flags);
769 urb = hcd->status_urb;
770 if (urb) {
771 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
772 hcd->status_urb = NULL;
773 urb->actual_length = length;
774 memcpy(urb->transfer_buffer, buffer, length);
775
776 usb_hcd_unlink_urb_from_ep(hcd, urb);
777 usb_hcd_giveback_urb(hcd, urb, 0);
778 } else {
779 length = 0;
780 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
781 }
782 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
783 }
784
785 /* The USB 2.0 spec says 256 ms. This is close enough and won't
786 * exceed that limit if HZ is 100. The math is more clunky than
787 * maybe expected, this is to make sure that all timers for USB devices
788 * fire at the same time to give the CPU a break in between */
789 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
790 (length == 0 && hcd->status_urb != NULL))
791 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
792}
793EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
794
795/* timer callback */
796static void rh_timer_func (struct timer_list *t)
797{
798 struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
799
800 usb_hcd_poll_rh_status(_hcd);
801}
802
803/*-------------------------------------------------------------------------*/
804
805static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
806{
807 int retval;
808 unsigned long flags;
809 unsigned len = 1 + (urb->dev->maxchild / 8);
810
811 spin_lock_irqsave (&hcd_root_hub_lock, flags);
812 if (hcd->status_urb || urb->transfer_buffer_length < len) {
813 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
814 retval = -EINVAL;
815 goto done;
816 }
817
818 retval = usb_hcd_link_urb_to_ep(hcd, urb);
819 if (retval)
820 goto done;
821
822 hcd->status_urb = urb;
823 urb->hcpriv = hcd; /* indicate it's queued */
824 if (!hcd->uses_new_polling)
825 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
826
827 /* If a status change has already occurred, report it ASAP */
828 else if (HCD_POLL_PENDING(hcd))
829 mod_timer(&hcd->rh_timer, jiffies);
830 retval = 0;
831 done:
832 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
833 return retval;
834}
835
836static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
837{
838 if (usb_endpoint_xfer_int(&urb->ep->desc))
839 return rh_queue_status (hcd, urb);
840 if (usb_endpoint_xfer_control(&urb->ep->desc))
841 return rh_call_control (hcd, urb);
842 return -EINVAL;
843}
844
845/*-------------------------------------------------------------------------*/
846
847/* Unlinks of root-hub control URBs are legal, but they don't do anything
848 * since these URBs always execute synchronously.
849 */
850static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
851{
852 unsigned long flags;
853 int rc;
854
855 spin_lock_irqsave(&hcd_root_hub_lock, flags);
856 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
857 if (rc)
858 goto done;
859
860 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
861 ; /* Do nothing */
862
863 } else { /* Status URB */
864 if (!hcd->uses_new_polling)
865 del_timer (&hcd->rh_timer);
866 if (urb == hcd->status_urb) {
867 hcd->status_urb = NULL;
868 usb_hcd_unlink_urb_from_ep(hcd, urb);
869 usb_hcd_giveback_urb(hcd, urb, status);
870 }
871 }
872 done:
873 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
874 return rc;
875}
876
877
878/*-------------------------------------------------------------------------*/
879
880/**
881 * usb_bus_init - shared initialization code
882 * @bus: the bus structure being initialized
883 *
884 * This code is used to initialize a usb_bus structure, memory for which is
885 * separately managed.
886 */
887static void usb_bus_init (struct usb_bus *bus)
888{
889 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
890
891 bus->devnum_next = 1;
892
893 bus->root_hub = NULL;
894 bus->busnum = -1;
895 bus->bandwidth_allocated = 0;
896 bus->bandwidth_int_reqs = 0;
897 bus->bandwidth_isoc_reqs = 0;
898 mutex_init(&bus->devnum_next_mutex);
899}
900
901/*-------------------------------------------------------------------------*/
902
903/**
904 * usb_register_bus - registers the USB host controller with the usb core
905 * @bus: pointer to the bus to register
906 * Context: !in_interrupt()
907 *
908 * Assigns a bus number, and links the controller into usbcore data
909 * structures so that it can be seen by scanning the bus list.
910 *
911 * Return: 0 if successful. A negative error code otherwise.
912 */
913static int usb_register_bus(struct usb_bus *bus)
914{
915 int result = -E2BIG;
916 int busnum;
917
918 mutex_lock(&usb_bus_idr_lock);
919 busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
920 if (busnum < 0) {
921 pr_err("%s: failed to get bus number\n", usbcore_name);
922 goto error_find_busnum;
923 }
924 bus->busnum = busnum;
925 mutex_unlock(&usb_bus_idr_lock);
926
927 usb_notify_add_bus(bus);
928
929 dev_info (bus->controller, "new USB bus registered, assigned bus "
930 "number %d\n", bus->busnum);
931 return 0;
932
933error_find_busnum:
934 mutex_unlock(&usb_bus_idr_lock);
935 return result;
936}
937
938/**
939 * usb_deregister_bus - deregisters the USB host controller
940 * @bus: pointer to the bus to deregister
941 * Context: !in_interrupt()
942 *
943 * Recycles the bus number, and unlinks the controller from usbcore data
944 * structures so that it won't be seen by scanning the bus list.
945 */
946static void usb_deregister_bus (struct usb_bus *bus)
947{
948 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
949
950 /*
951 * NOTE: make sure that all the devices are removed by the
952 * controller code, as well as having it call this when cleaning
953 * itself up
954 */
955 mutex_lock(&usb_bus_idr_lock);
956 idr_remove(&usb_bus_idr, bus->busnum);
957 mutex_unlock(&usb_bus_idr_lock);
958
959 usb_notify_remove_bus(bus);
960}
961
962/**
963 * register_root_hub - called by usb_add_hcd() to register a root hub
964 * @hcd: host controller for this root hub
965 *
966 * This function registers the root hub with the USB subsystem. It sets up
967 * the device properly in the device tree and then calls usb_new_device()
968 * to register the usb device. It also assigns the root hub's USB address
969 * (always 1).
970 *
971 * Return: 0 if successful. A negative error code otherwise.
972 */
973static int register_root_hub(struct usb_hcd *hcd)
974{
975 struct device *parent_dev = hcd->self.controller;
976 struct usb_device *usb_dev = hcd->self.root_hub;
977 const int devnum = 1;
978 int retval;
979
980 usb_dev->devnum = devnum;
981 usb_dev->bus->devnum_next = devnum + 1;
982 set_bit (devnum, usb_dev->bus->devmap.devicemap);
983 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
984
985 mutex_lock(&usb_bus_idr_lock);
986
987 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
988 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
989 if (retval != sizeof usb_dev->descriptor) {
990 mutex_unlock(&usb_bus_idr_lock);
991 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
992 dev_name(&usb_dev->dev), retval);
993 return (retval < 0) ? retval : -EMSGSIZE;
994 }
995
996 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
997 retval = usb_get_bos_descriptor(usb_dev);
998 if (!retval) {
999 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1000 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
1001 mutex_unlock(&usb_bus_idr_lock);
1002 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1003 dev_name(&usb_dev->dev), retval);
1004 return retval;
1005 }
1006 }
1007
1008 retval = usb_new_device (usb_dev);
1009 if (retval) {
1010 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1011 dev_name(&usb_dev->dev), retval);
1012 } else {
1013 spin_lock_irq (&hcd_root_hub_lock);
1014 hcd->rh_registered = 1;
1015 spin_unlock_irq (&hcd_root_hub_lock);
1016
1017 /* Did the HC die before the root hub was registered? */
1018 if (HCD_DEAD(hcd))
1019 usb_hc_died (hcd); /* This time clean up */
1020 }
1021 mutex_unlock(&usb_bus_idr_lock);
1022
1023 return retval;
1024}
1025
1026/*
1027 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1028 * @bus: the bus which the root hub belongs to
1029 * @portnum: the port which is being resumed
1030 *
1031 * HCDs should call this function when they know that a resume signal is
1032 * being sent to a root-hub port. The root hub will be prevented from
1033 * going into autosuspend until usb_hcd_end_port_resume() is called.
1034 *
1035 * The bus's private lock must be held by the caller.
1036 */
1037void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1038{
1039 unsigned bit = 1 << portnum;
1040
1041 if (!(bus->resuming_ports & bit)) {
1042 bus->resuming_ports |= bit;
1043 pm_runtime_get_noresume(&bus->root_hub->dev);
1044 }
1045}
1046EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1047
1048/*
1049 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1050 * @bus: the bus which the root hub belongs to
1051 * @portnum: the port which is being resumed
1052 *
1053 * HCDs should call this function when they know that a resume signal has
1054 * stopped being sent to a root-hub port. The root hub will be allowed to
1055 * autosuspend again.
1056 *
1057 * The bus's private lock must be held by the caller.
1058 */
1059void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1060{
1061 unsigned bit = 1 << portnum;
1062
1063 if (bus->resuming_ports & bit) {
1064 bus->resuming_ports &= ~bit;
1065 pm_runtime_put_noidle(&bus->root_hub->dev);
1066 }
1067}
1068EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1069
1070/*-------------------------------------------------------------------------*/
1071
1072/**
1073 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1074 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1075 * @is_input: true iff the transaction sends data to the host
1076 * @isoc: true for isochronous transactions, false for interrupt ones
1077 * @bytecount: how many bytes in the transaction.
1078 *
1079 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1080 *
1081 * Note:
1082 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1083 * scheduled in software, this function is only used for such scheduling.
1084 */
1085long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1086{
1087 unsigned long tmp;
1088
1089 switch (speed) {
1090 case USB_SPEED_LOW: /* INTR only */
1091 if (is_input) {
1092 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1093 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1094 } else {
1095 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1096 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1097 }
1098 case USB_SPEED_FULL: /* ISOC or INTR */
1099 if (isoc) {
1100 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1101 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1102 } else {
1103 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1104 return 9107L + BW_HOST_DELAY + tmp;
1105 }
1106 case USB_SPEED_HIGH: /* ISOC or INTR */
1107 /* FIXME adjust for input vs output */
1108 if (isoc)
1109 tmp = HS_NSECS_ISO (bytecount);
1110 else
1111 tmp = HS_NSECS (bytecount);
1112 return tmp;
1113 default:
1114 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1115 return -1;
1116 }
1117}
1118EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1119
1120
1121/*-------------------------------------------------------------------------*/
1122
1123/*
1124 * Generic HC operations.
1125 */
1126
1127/*-------------------------------------------------------------------------*/
1128
1129/**
1130 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1131 * @hcd: host controller to which @urb was submitted
1132 * @urb: URB being submitted
1133 *
1134 * Host controller drivers should call this routine in their enqueue()
1135 * method. The HCD's private spinlock must be held and interrupts must
1136 * be disabled. The actions carried out here are required for URB
1137 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1138 *
1139 * Return: 0 for no error, otherwise a negative error code (in which case
1140 * the enqueue() method must fail). If no error occurs but enqueue() fails
1141 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1142 * the private spinlock and returning.
1143 */
1144int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1145{
1146 int rc = 0;
1147
1148 spin_lock(&hcd_urb_list_lock);
1149
1150 /* Check that the URB isn't being killed */
1151 if (unlikely(atomic_read(&urb->reject))) {
1152 rc = -EPERM;
1153 goto done;
1154 }
1155
1156 if (unlikely(!urb->ep->enabled)) {
1157 rc = -ENOENT;
1158 goto done;
1159 }
1160
1161 if (unlikely(!urb->dev->can_submit)) {
1162 rc = -EHOSTUNREACH;
1163 goto done;
1164 }
1165
1166 /*
1167 * Check the host controller's state and add the URB to the
1168 * endpoint's queue.
1169 */
1170 if (HCD_RH_RUNNING(hcd)) {
1171 urb->unlinked = 0;
1172 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1173 } else {
1174 rc = -ESHUTDOWN;
1175 goto done;
1176 }
1177 done:
1178 spin_unlock(&hcd_urb_list_lock);
1179 return rc;
1180}
1181EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1182
1183/**
1184 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1185 * @hcd: host controller to which @urb was submitted
1186 * @urb: URB being checked for unlinkability
1187 * @status: error code to store in @urb if the unlink succeeds
1188 *
1189 * Host controller drivers should call this routine in their dequeue()
1190 * method. The HCD's private spinlock must be held and interrupts must
1191 * be disabled. The actions carried out here are required for making
1192 * sure than an unlink is valid.
1193 *
1194 * Return: 0 for no error, otherwise a negative error code (in which case
1195 * the dequeue() method must fail). The possible error codes are:
1196 *
1197 * -EIDRM: @urb was not submitted or has already completed.
1198 * The completion function may not have been called yet.
1199 *
1200 * -EBUSY: @urb has already been unlinked.
1201 */
1202int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1203 int status)
1204{
1205 struct list_head *tmp;
1206
1207 /* insist the urb is still queued */
1208 list_for_each(tmp, &urb->ep->urb_list) {
1209 if (tmp == &urb->urb_list)
1210 break;
1211 }
1212 if (tmp != &urb->urb_list)
1213 return -EIDRM;
1214
1215 /* Any status except -EINPROGRESS means something already started to
1216 * unlink this URB from the hardware. So there's no more work to do.
1217 */
1218 if (urb->unlinked)
1219 return -EBUSY;
1220 urb->unlinked = status;
1221 return 0;
1222}
1223EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1224
1225/**
1226 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1227 * @hcd: host controller to which @urb was submitted
1228 * @urb: URB being unlinked
1229 *
1230 * Host controller drivers should call this routine before calling
1231 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1232 * interrupts must be disabled. The actions carried out here are required
1233 * for URB completion.
1234 */
1235void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1236{
1237 /* clear all state linking urb to this dev (and hcd) */
1238 spin_lock(&hcd_urb_list_lock);
1239 list_del_init(&urb->urb_list);
1240 spin_unlock(&hcd_urb_list_lock);
1241}
1242EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1243
1244/*
1245 * Some usb host controllers can only perform dma using a small SRAM area.
1246 * The usb core itself is however optimized for host controllers that can dma
1247 * using regular system memory - like pci devices doing bus mastering.
1248 *
1249 * To support host controllers with limited dma capabilities we provide dma
1250 * bounce buffers. This feature can be enabled by initializing
1251 * hcd->localmem_pool using usb_hcd_setup_local_mem().
1252 *
1253 * The initialized hcd->localmem_pool then tells the usb code to allocate all
1254 * data for dma using the genalloc API.
1255 *
1256 * So, to summarize...
1257 *
1258 * - We need "local" memory, canonical example being
1259 * a small SRAM on a discrete controller being the
1260 * only memory that the controller can read ...
1261 * (a) "normal" kernel memory is no good, and
1262 * (b) there's not enough to share
1263 *
1264 * - So we use that, even though the primary requirement
1265 * is that the memory be "local" (hence addressable
1266 * by that device), not "coherent".
1267 *
1268 */
1269
1270static int hcd_alloc_coherent(struct usb_bus *bus,
1271 gfp_t mem_flags, dma_addr_t *dma_handle,
1272 void **vaddr_handle, size_t size,
1273 enum dma_data_direction dir)
1274{
1275 unsigned char *vaddr;
1276
1277 if (*vaddr_handle == NULL) {
1278 WARN_ON_ONCE(1);
1279 return -EFAULT;
1280 }
1281
1282 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1283 mem_flags, dma_handle);
1284 if (!vaddr)
1285 return -ENOMEM;
1286
1287 /*
1288 * Store the virtual address of the buffer at the end
1289 * of the allocated dma buffer. The size of the buffer
1290 * may be uneven so use unaligned functions instead
1291 * of just rounding up. It makes sense to optimize for
1292 * memory footprint over access speed since the amount
1293 * of memory available for dma may be limited.
1294 */
1295 put_unaligned((unsigned long)*vaddr_handle,
1296 (unsigned long *)(vaddr + size));
1297
1298 if (dir == DMA_TO_DEVICE)
1299 memcpy(vaddr, *vaddr_handle, size);
1300
1301 *vaddr_handle = vaddr;
1302 return 0;
1303}
1304
1305static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1306 void **vaddr_handle, size_t size,
1307 enum dma_data_direction dir)
1308{
1309 unsigned char *vaddr = *vaddr_handle;
1310
1311 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1312
1313 if (dir == DMA_FROM_DEVICE)
1314 memcpy(vaddr, *vaddr_handle, size);
1315
1316 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1317
1318 *vaddr_handle = vaddr;
1319 *dma_handle = 0;
1320}
1321
1322void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1323{
1324 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1325 (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1326 dma_unmap_single(hcd->self.sysdev,
1327 urb->setup_dma,
1328 sizeof(struct usb_ctrlrequest),
1329 DMA_TO_DEVICE);
1330 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1331 hcd_free_coherent(urb->dev->bus,
1332 &urb->setup_dma,
1333 (void **) &urb->setup_packet,
1334 sizeof(struct usb_ctrlrequest),
1335 DMA_TO_DEVICE);
1336
1337 /* Make it safe to call this routine more than once */
1338 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1339}
1340EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1341
1342static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1343{
1344 if (hcd->driver->unmap_urb_for_dma)
1345 hcd->driver->unmap_urb_for_dma(hcd, urb);
1346 else
1347 usb_hcd_unmap_urb_for_dma(hcd, urb);
1348}
1349
1350void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1351{
1352 enum dma_data_direction dir;
1353
1354 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1355
1356 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1357 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1358 (urb->transfer_flags & URB_DMA_MAP_SG))
1359 dma_unmap_sg(hcd->self.sysdev,
1360 urb->sg,
1361 urb->num_sgs,
1362 dir);
1363 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1364 (urb->transfer_flags & URB_DMA_MAP_PAGE))
1365 dma_unmap_page(hcd->self.sysdev,
1366 urb->transfer_dma,
1367 urb->transfer_buffer_length,
1368 dir);
1369 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1370 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1371 dma_unmap_single(hcd->self.sysdev,
1372 urb->transfer_dma,
1373 urb->transfer_buffer_length,
1374 dir);
1375 else if (urb->transfer_flags & URB_MAP_LOCAL)
1376 hcd_free_coherent(urb->dev->bus,
1377 &urb->transfer_dma,
1378 &urb->transfer_buffer,
1379 urb->transfer_buffer_length,
1380 dir);
1381
1382 /* Make it safe to call this routine more than once */
1383 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1384 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1385}
1386EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1387
1388static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1389 gfp_t mem_flags)
1390{
1391 if (hcd->driver->map_urb_for_dma)
1392 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1393 else
1394 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1395}
1396
1397int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1398 gfp_t mem_flags)
1399{
1400 enum dma_data_direction dir;
1401 int ret = 0;
1402
1403 /* Map the URB's buffers for DMA access.
1404 * Lower level HCD code should use *_dma exclusively,
1405 * unless it uses pio or talks to another transport,
1406 * or uses the provided scatter gather list for bulk.
1407 */
1408
1409 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1410 if (hcd->self.uses_pio_for_control)
1411 return ret;
1412 if (hcd_uses_dma(hcd)) {
1413 if (is_vmalloc_addr(urb->setup_packet)) {
1414 WARN_ONCE(1, "setup packet is not dma capable\n");
1415 return -EAGAIN;
1416 } else if (object_is_on_stack(urb->setup_packet)) {
1417 WARN_ONCE(1, "setup packet is on stack\n");
1418 return -EAGAIN;
1419 }
1420
1421 urb->setup_dma = dma_map_single(
1422 hcd->self.sysdev,
1423 urb->setup_packet,
1424 sizeof(struct usb_ctrlrequest),
1425 DMA_TO_DEVICE);
1426 if (dma_mapping_error(hcd->self.sysdev,
1427 urb->setup_dma))
1428 return -EAGAIN;
1429 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1430 } else if (hcd->localmem_pool) {
1431 ret = hcd_alloc_coherent(
1432 urb->dev->bus, mem_flags,
1433 &urb->setup_dma,
1434 (void **)&urb->setup_packet,
1435 sizeof(struct usb_ctrlrequest),
1436 DMA_TO_DEVICE);
1437 if (ret)
1438 return ret;
1439 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1440 }
1441 }
1442
1443 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1444 if (urb->transfer_buffer_length != 0
1445 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1446 if (hcd_uses_dma(hcd)) {
1447 if (urb->num_sgs) {
1448 int n;
1449
1450 /* We don't support sg for isoc transfers ! */
1451 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1452 WARN_ON(1);
1453 return -EINVAL;
1454 }
1455
1456 n = dma_map_sg(
1457 hcd->self.sysdev,
1458 urb->sg,
1459 urb->num_sgs,
1460 dir);
1461 if (n <= 0)
1462 ret = -EAGAIN;
1463 else
1464 urb->transfer_flags |= URB_DMA_MAP_SG;
1465 urb->num_mapped_sgs = n;
1466 if (n != urb->num_sgs)
1467 urb->transfer_flags |=
1468 URB_DMA_SG_COMBINED;
1469 } else if (urb->sg) {
1470 struct scatterlist *sg = urb->sg;
1471 urb->transfer_dma = dma_map_page(
1472 hcd->self.sysdev,
1473 sg_page(sg),
1474 sg->offset,
1475 urb->transfer_buffer_length,
1476 dir);
1477 if (dma_mapping_error(hcd->self.sysdev,
1478 urb->transfer_dma))
1479 ret = -EAGAIN;
1480 else
1481 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1482 } else if (is_vmalloc_addr(urb->transfer_buffer)) {
1483 WARN_ONCE(1, "transfer buffer not dma capable\n");
1484 ret = -EAGAIN;
1485 } else if (object_is_on_stack(urb->transfer_buffer)) {
1486 WARN_ONCE(1, "transfer buffer is on stack\n");
1487 ret = -EAGAIN;
1488 } else {
1489 urb->transfer_dma = dma_map_single(
1490 hcd->self.sysdev,
1491 urb->transfer_buffer,
1492 urb->transfer_buffer_length,
1493 dir);
1494 if (dma_mapping_error(hcd->self.sysdev,
1495 urb->transfer_dma))
1496 ret = -EAGAIN;
1497 else
1498 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1499 }
1500 } else if (hcd->localmem_pool) {
1501 ret = hcd_alloc_coherent(
1502 urb->dev->bus, mem_flags,
1503 &urb->transfer_dma,
1504 &urb->transfer_buffer,
1505 urb->transfer_buffer_length,
1506 dir);
1507 if (ret == 0)
1508 urb->transfer_flags |= URB_MAP_LOCAL;
1509 }
1510 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1511 URB_SETUP_MAP_LOCAL)))
1512 usb_hcd_unmap_urb_for_dma(hcd, urb);
1513 }
1514 return ret;
1515}
1516EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1517
1518/*-------------------------------------------------------------------------*/
1519
1520/* may be called in any context with a valid urb->dev usecount
1521 * caller surrenders "ownership" of urb
1522 * expects usb_submit_urb() to have sanity checked and conditioned all
1523 * inputs in the urb
1524 */
1525int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1526{
1527 int status;
1528 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1529
1530 /* increment urb's reference count as part of giving it to the HCD
1531 * (which will control it). HCD guarantees that it either returns
1532 * an error or calls giveback(), but not both.
1533 */
1534 usb_get_urb(urb);
1535 atomic_inc(&urb->use_count);
1536 atomic_inc(&urb->dev->urbnum);
1537 usbmon_urb_submit(&hcd->self, urb);
1538
1539 /* NOTE requirements on root-hub callers (usbfs and the hub
1540 * driver, for now): URBs' urb->transfer_buffer must be
1541 * valid and usb_buffer_{sync,unmap}() not be needed, since
1542 * they could clobber root hub response data. Also, control
1543 * URBs must be submitted in process context with interrupts
1544 * enabled.
1545 */
1546
1547 if (is_root_hub(urb->dev)) {
1548 status = rh_urb_enqueue(hcd, urb);
1549 } else {
1550 status = map_urb_for_dma(hcd, urb, mem_flags);
1551 if (likely(status == 0)) {
1552 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1553 if (unlikely(status))
1554 unmap_urb_for_dma(hcd, urb);
1555 }
1556 }
1557
1558 if (unlikely(status)) {
1559 usbmon_urb_submit_error(&hcd->self, urb, status);
1560 urb->hcpriv = NULL;
1561 INIT_LIST_HEAD(&urb->urb_list);
1562 atomic_dec(&urb->use_count);
1563 atomic_dec(&urb->dev->urbnum);
1564 if (atomic_read(&urb->reject))
1565 wake_up(&usb_kill_urb_queue);
1566 usb_put_urb(urb);
1567 }
1568 return status;
1569}
1570
1571/*-------------------------------------------------------------------------*/
1572
1573/* this makes the hcd giveback() the urb more quickly, by kicking it
1574 * off hardware queues (which may take a while) and returning it as
1575 * soon as practical. we've already set up the urb's return status,
1576 * but we can't know if the callback completed already.
1577 */
1578static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1579{
1580 int value;
1581
1582 if (is_root_hub(urb->dev))
1583 value = usb_rh_urb_dequeue(hcd, urb, status);
1584 else {
1585
1586 /* The only reason an HCD might fail this call is if
1587 * it has not yet fully queued the urb to begin with.
1588 * Such failures should be harmless. */
1589 value = hcd->driver->urb_dequeue(hcd, urb, status);
1590 }
1591 return value;
1592}
1593
1594/*
1595 * called in any context
1596 *
1597 * caller guarantees urb won't be recycled till both unlink()
1598 * and the urb's completion function return
1599 */
1600int usb_hcd_unlink_urb (struct urb *urb, int status)
1601{
1602 struct usb_hcd *hcd;
1603 struct usb_device *udev = urb->dev;
1604 int retval = -EIDRM;
1605 unsigned long flags;
1606
1607 /* Prevent the device and bus from going away while
1608 * the unlink is carried out. If they are already gone
1609 * then urb->use_count must be 0, since disconnected
1610 * devices can't have any active URBs.
1611 */
1612 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1613 if (atomic_read(&urb->use_count) > 0) {
1614 retval = 0;
1615 usb_get_dev(udev);
1616 }
1617 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1618 if (retval == 0) {
1619 hcd = bus_to_hcd(urb->dev->bus);
1620 retval = unlink1(hcd, urb, status);
1621 if (retval == 0)
1622 retval = -EINPROGRESS;
1623 else if (retval != -EIDRM && retval != -EBUSY)
1624 dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
1625 urb, retval);
1626 usb_put_dev(udev);
1627 }
1628 return retval;
1629}
1630
1631/*-------------------------------------------------------------------------*/
1632
1633static void __usb_hcd_giveback_urb(struct urb *urb)
1634{
1635 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1636 struct usb_anchor *anchor = urb->anchor;
1637 int status = urb->unlinked;
1638
1639 urb->hcpriv = NULL;
1640 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1641 urb->actual_length < urb->transfer_buffer_length &&
1642 !status))
1643 status = -EREMOTEIO;
1644
1645 unmap_urb_for_dma(hcd, urb);
1646 usbmon_urb_complete(&hcd->self, urb, status);
1647 usb_anchor_suspend_wakeups(anchor);
1648 usb_unanchor_urb(urb);
1649 if (likely(status == 0))
1650 usb_led_activity(USB_LED_EVENT_HOST);
1651
1652 /* pass ownership to the completion handler */
1653 urb->status = status;
1654 urb->complete(urb);
1655
1656 usb_anchor_resume_wakeups(anchor);
1657 atomic_dec(&urb->use_count);
1658 if (unlikely(atomic_read(&urb->reject)))
1659 wake_up(&usb_kill_urb_queue);
1660 usb_put_urb(urb);
1661}
1662
1663static void usb_giveback_urb_bh(unsigned long param)
1664{
1665 struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
1666 struct list_head local_list;
1667
1668 spin_lock_irq(&bh->lock);
1669 bh->running = true;
1670 restart:
1671 list_replace_init(&bh->head, &local_list);
1672 spin_unlock_irq(&bh->lock);
1673
1674 while (!list_empty(&local_list)) {
1675 struct urb *urb;
1676
1677 urb = list_entry(local_list.next, struct urb, urb_list);
1678 list_del_init(&urb->urb_list);
1679 bh->completing_ep = urb->ep;
1680 __usb_hcd_giveback_urb(urb);
1681 bh->completing_ep = NULL;
1682 }
1683
1684 /* check if there are new URBs to giveback */
1685 spin_lock_irq(&bh->lock);
1686 if (!list_empty(&bh->head))
1687 goto restart;
1688 bh->running = false;
1689 spin_unlock_irq(&bh->lock);
1690}
1691
1692/**
1693 * usb_hcd_giveback_urb - return URB from HCD to device driver
1694 * @hcd: host controller returning the URB
1695 * @urb: urb being returned to the USB device driver.
1696 * @status: completion status code for the URB.
1697 * Context: in_interrupt()
1698 *
1699 * This hands the URB from HCD to its USB device driver, using its
1700 * completion function. The HCD has freed all per-urb resources
1701 * (and is done using urb->hcpriv). It also released all HCD locks;
1702 * the device driver won't cause problems if it frees, modifies,
1703 * or resubmits this URB.
1704 *
1705 * If @urb was unlinked, the value of @status will be overridden by
1706 * @urb->unlinked. Erroneous short transfers are detected in case
1707 * the HCD hasn't checked for them.
1708 */
1709void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1710{
1711 struct giveback_urb_bh *bh;
1712 bool running, high_prio_bh;
1713
1714 /* pass status to tasklet via unlinked */
1715 if (likely(!urb->unlinked))
1716 urb->unlinked = status;
1717
1718 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1719 __usb_hcd_giveback_urb(urb);
1720 return;
1721 }
1722
1723 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
1724 bh = &hcd->high_prio_bh;
1725 high_prio_bh = true;
1726 } else {
1727 bh = &hcd->low_prio_bh;
1728 high_prio_bh = false;
1729 }
1730
1731 spin_lock(&bh->lock);
1732 list_add_tail(&urb->urb_list, &bh->head);
1733 running = bh->running;
1734 spin_unlock(&bh->lock);
1735
1736 if (running)
1737 ;
1738 else if (high_prio_bh)
1739 tasklet_hi_schedule(&bh->bh);
1740 else
1741 tasklet_schedule(&bh->bh);
1742}
1743EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1744
1745/*-------------------------------------------------------------------------*/
1746
1747/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1748 * queue to drain completely. The caller must first insure that no more
1749 * URBs can be submitted for this endpoint.
1750 */
1751void usb_hcd_flush_endpoint(struct usb_device *udev,
1752 struct usb_host_endpoint *ep)
1753{
1754 struct usb_hcd *hcd;
1755 struct urb *urb;
1756
1757 if (!ep)
1758 return;
1759 might_sleep();
1760 hcd = bus_to_hcd(udev->bus);
1761
1762 /* No more submits can occur */
1763 spin_lock_irq(&hcd_urb_list_lock);
1764rescan:
1765 list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
1766 int is_in;
1767
1768 if (urb->unlinked)
1769 continue;
1770 usb_get_urb (urb);
1771 is_in = usb_urb_dir_in(urb);
1772 spin_unlock(&hcd_urb_list_lock);
1773
1774 /* kick hcd */
1775 unlink1(hcd, urb, -ESHUTDOWN);
1776 dev_dbg (hcd->self.controller,
1777 "shutdown urb %pK ep%d%s-%s\n",
1778 urb, usb_endpoint_num(&ep->desc),
1779 is_in ? "in" : "out",
1780 usb_ep_type_string(usb_endpoint_type(&ep->desc)));
1781 usb_put_urb (urb);
1782
1783 /* list contents may have changed */
1784 spin_lock(&hcd_urb_list_lock);
1785 goto rescan;
1786 }
1787 spin_unlock_irq(&hcd_urb_list_lock);
1788
1789 /* Wait until the endpoint queue is completely empty */
1790 while (!list_empty (&ep->urb_list)) {
1791 spin_lock_irq(&hcd_urb_list_lock);
1792
1793 /* The list may have changed while we acquired the spinlock */
1794 urb = NULL;
1795 if (!list_empty (&ep->urb_list)) {
1796 urb = list_entry (ep->urb_list.prev, struct urb,
1797 urb_list);
1798 usb_get_urb (urb);
1799 }
1800 spin_unlock_irq(&hcd_urb_list_lock);
1801
1802 if (urb) {
1803 usb_kill_urb (urb);
1804 usb_put_urb (urb);
1805 }
1806 }
1807}
1808
1809/**
1810 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1811 * the bus bandwidth
1812 * @udev: target &usb_device
1813 * @new_config: new configuration to install
1814 * @cur_alt: the current alternate interface setting
1815 * @new_alt: alternate interface setting that is being installed
1816 *
1817 * To change configurations, pass in the new configuration in new_config,
1818 * and pass NULL for cur_alt and new_alt.
1819 *
1820 * To reset a device's configuration (put the device in the ADDRESSED state),
1821 * pass in NULL for new_config, cur_alt, and new_alt.
1822 *
1823 * To change alternate interface settings, pass in NULL for new_config,
1824 * pass in the current alternate interface setting in cur_alt,
1825 * and pass in the new alternate interface setting in new_alt.
1826 *
1827 * Return: An error if the requested bandwidth change exceeds the
1828 * bus bandwidth or host controller internal resources.
1829 */
1830int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1831 struct usb_host_config *new_config,
1832 struct usb_host_interface *cur_alt,
1833 struct usb_host_interface *new_alt)
1834{
1835 int num_intfs, i, j;
1836 struct usb_host_interface *alt = NULL;
1837 int ret = 0;
1838 struct usb_hcd *hcd;
1839 struct usb_host_endpoint *ep;
1840
1841 hcd = bus_to_hcd(udev->bus);
1842 if (!hcd->driver->check_bandwidth)
1843 return 0;
1844
1845 /* Configuration is being removed - set configuration 0 */
1846 if (!new_config && !cur_alt) {
1847 for (i = 1; i < 16; ++i) {
1848 ep = udev->ep_out[i];
1849 if (ep)
1850 hcd->driver->drop_endpoint(hcd, udev, ep);
1851 ep = udev->ep_in[i];
1852 if (ep)
1853 hcd->driver->drop_endpoint(hcd, udev, ep);
1854 }
1855 hcd->driver->check_bandwidth(hcd, udev);
1856 return 0;
1857 }
1858 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1859 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1860 * of the bus. There will always be bandwidth for endpoint 0, so it's
1861 * ok to exclude it.
1862 */
1863 if (new_config) {
1864 num_intfs = new_config->desc.bNumInterfaces;
1865 /* Remove endpoints (except endpoint 0, which is always on the
1866 * schedule) from the old config from the schedule
1867 */
1868 for (i = 1; i < 16; ++i) {
1869 ep = udev->ep_out[i];
1870 if (ep) {
1871 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1872 if (ret < 0)
1873 goto reset;
1874 }
1875 ep = udev->ep_in[i];
1876 if (ep) {
1877 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1878 if (ret < 0)
1879 goto reset;
1880 }
1881 }
1882 for (i = 0; i < num_intfs; ++i) {
1883 struct usb_host_interface *first_alt;
1884 int iface_num;
1885
1886 first_alt = &new_config->intf_cache[i]->altsetting[0];
1887 iface_num = first_alt->desc.bInterfaceNumber;
1888 /* Set up endpoints for alternate interface setting 0 */
1889 alt = usb_find_alt_setting(new_config, iface_num, 0);
1890 if (!alt)
1891 /* No alt setting 0? Pick the first setting. */
1892 alt = first_alt;
1893
1894 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1895 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1896 if (ret < 0)
1897 goto reset;
1898 }
1899 }
1900 }
1901 if (cur_alt && new_alt) {
1902 struct usb_interface *iface = usb_ifnum_to_if(udev,
1903 cur_alt->desc.bInterfaceNumber);
1904
1905 if (!iface)
1906 return -EINVAL;
1907 if (iface->resetting_device) {
1908 /*
1909 * The USB core just reset the device, so the xHCI host
1910 * and the device will think alt setting 0 is installed.
1911 * However, the USB core will pass in the alternate
1912 * setting installed before the reset as cur_alt. Dig
1913 * out the alternate setting 0 structure, or the first
1914 * alternate setting if a broken device doesn't have alt
1915 * setting 0.
1916 */
1917 cur_alt = usb_altnum_to_altsetting(iface, 0);
1918 if (!cur_alt)
1919 cur_alt = &iface->altsetting[0];
1920 }
1921
1922 /* Drop all the endpoints in the current alt setting */
1923 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
1924 ret = hcd->driver->drop_endpoint(hcd, udev,
1925 &cur_alt->endpoint[i]);
1926 if (ret < 0)
1927 goto reset;
1928 }
1929 /* Add all the endpoints in the new alt setting */
1930 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
1931 ret = hcd->driver->add_endpoint(hcd, udev,
1932 &new_alt->endpoint[i]);
1933 if (ret < 0)
1934 goto reset;
1935 }
1936 }
1937 ret = hcd->driver->check_bandwidth(hcd, udev);
1938reset:
1939 if (ret < 0)
1940 hcd->driver->reset_bandwidth(hcd, udev);
1941 return ret;
1942}
1943
1944/* Disables the endpoint: synchronizes with the hcd to make sure all
1945 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
1946 * have been called previously. Use for set_configuration, set_interface,
1947 * driver removal, physical disconnect.
1948 *
1949 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1950 * type, maxpacket size, toggle, halt status, and scheduling.
1951 */
1952void usb_hcd_disable_endpoint(struct usb_device *udev,
1953 struct usb_host_endpoint *ep)
1954{
1955 struct usb_hcd *hcd;
1956
1957 might_sleep();
1958 hcd = bus_to_hcd(udev->bus);
1959 if (hcd->driver->endpoint_disable)
1960 hcd->driver->endpoint_disable(hcd, ep);
1961}
1962
1963/**
1964 * usb_hcd_reset_endpoint - reset host endpoint state
1965 * @udev: USB device.
1966 * @ep: the endpoint to reset.
1967 *
1968 * Resets any host endpoint state such as the toggle bit, sequence
1969 * number and current window.
1970 */
1971void usb_hcd_reset_endpoint(struct usb_device *udev,
1972 struct usb_host_endpoint *ep)
1973{
1974 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
1975
1976 if (hcd->driver->endpoint_reset)
1977 hcd->driver->endpoint_reset(hcd, ep);
1978 else {
1979 int epnum = usb_endpoint_num(&ep->desc);
1980 int is_out = usb_endpoint_dir_out(&ep->desc);
1981 int is_control = usb_endpoint_xfer_control(&ep->desc);
1982
1983 usb_settoggle(udev, epnum, is_out, 0);
1984 if (is_control)
1985 usb_settoggle(udev, epnum, !is_out, 0);
1986 }
1987}
1988
1989/**
1990 * usb_alloc_streams - allocate bulk endpoint stream IDs.
1991 * @interface: alternate setting that includes all endpoints.
1992 * @eps: array of endpoints that need streams.
1993 * @num_eps: number of endpoints in the array.
1994 * @num_streams: number of streams to allocate.
1995 * @mem_flags: flags hcd should use to allocate memory.
1996 *
1997 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
1998 * Drivers may queue multiple transfers to different stream IDs, which may
1999 * complete in a different order than they were queued.
2000 *
2001 * Return: On success, the number of allocated streams. On failure, a negative
2002 * error code.
2003 */
2004int usb_alloc_streams(struct usb_interface *interface,
2005 struct usb_host_endpoint **eps, unsigned int num_eps,
2006 unsigned int num_streams, gfp_t mem_flags)
2007{
2008 struct usb_hcd *hcd;
2009 struct usb_device *dev;
2010 int i, ret;
2011
2012 dev = interface_to_usbdev(interface);
2013 hcd = bus_to_hcd(dev->bus);
2014 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2015 return -EINVAL;
2016 if (dev->speed < USB_SPEED_SUPER)
2017 return -EINVAL;
2018 if (dev->state < USB_STATE_CONFIGURED)
2019 return -ENODEV;
2020
2021 for (i = 0; i < num_eps; i++) {
2022 /* Streams only apply to bulk endpoints. */
2023 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2024 return -EINVAL;
2025 /* Re-alloc is not allowed */
2026 if (eps[i]->streams)
2027 return -EINVAL;
2028 }
2029
2030 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2031 num_streams, mem_flags);
2032 if (ret < 0)
2033 return ret;
2034
2035 for (i = 0; i < num_eps; i++)
2036 eps[i]->streams = ret;
2037
2038 return ret;
2039}
2040EXPORT_SYMBOL_GPL(usb_alloc_streams);
2041
2042/**
2043 * usb_free_streams - free bulk endpoint stream IDs.
2044 * @interface: alternate setting that includes all endpoints.
2045 * @eps: array of endpoints to remove streams from.
2046 * @num_eps: number of endpoints in the array.
2047 * @mem_flags: flags hcd should use to allocate memory.
2048 *
2049 * Reverts a group of bulk endpoints back to not using stream IDs.
2050 * Can fail if we are given bad arguments, or HCD is broken.
2051 *
2052 * Return: 0 on success. On failure, a negative error code.
2053 */
2054int usb_free_streams(struct usb_interface *interface,
2055 struct usb_host_endpoint **eps, unsigned int num_eps,
2056 gfp_t mem_flags)
2057{
2058 struct usb_hcd *hcd;
2059 struct usb_device *dev;
2060 int i, ret;
2061
2062 dev = interface_to_usbdev(interface);
2063 hcd = bus_to_hcd(dev->bus);
2064 if (dev->speed < USB_SPEED_SUPER)
2065 return -EINVAL;
2066
2067 /* Double-free is not allowed */
2068 for (i = 0; i < num_eps; i++)
2069 if (!eps[i] || !eps[i]->streams)
2070 return -EINVAL;
2071
2072 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2073 if (ret < 0)
2074 return ret;
2075
2076 for (i = 0; i < num_eps; i++)
2077 eps[i]->streams = 0;
2078
2079 return ret;
2080}
2081EXPORT_SYMBOL_GPL(usb_free_streams);
2082
2083/* Protect against drivers that try to unlink URBs after the device
2084 * is gone, by waiting until all unlinks for @udev are finished.
2085 * Since we don't currently track URBs by device, simply wait until
2086 * nothing is running in the locked region of usb_hcd_unlink_urb().
2087 */
2088void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2089{
2090 spin_lock_irq(&hcd_urb_unlink_lock);
2091 spin_unlock_irq(&hcd_urb_unlink_lock);
2092}
2093
2094/*-------------------------------------------------------------------------*/
2095
2096/* called in any context */
2097int usb_hcd_get_frame_number (struct usb_device *udev)
2098{
2099 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2100
2101 if (!HCD_RH_RUNNING(hcd))
2102 return -ESHUTDOWN;
2103 return hcd->driver->get_frame_number (hcd);
2104}
2105
2106/*-------------------------------------------------------------------------*/
2107
2108#ifdef CONFIG_PM
2109
2110int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2111{
2112 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2113 int status;
2114 int old_state = hcd->state;
2115
2116 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2117 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2118 rhdev->do_remote_wakeup);
2119 if (HCD_DEAD(hcd)) {
2120 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2121 return 0;
2122 }
2123
2124 if (!hcd->driver->bus_suspend) {
2125 status = -ENOENT;
2126 } else {
2127 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2128 hcd->state = HC_STATE_QUIESCING;
2129 status = hcd->driver->bus_suspend(hcd);
2130 }
2131 if (status == 0) {
2132 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2133 hcd->state = HC_STATE_SUSPENDED;
2134
2135 if (!PMSG_IS_AUTO(msg))
2136 usb_phy_roothub_suspend(hcd->self.sysdev,
2137 hcd->phy_roothub);
2138
2139 /* Did we race with a root-hub wakeup event? */
2140 if (rhdev->do_remote_wakeup) {
2141 char buffer[6];
2142
2143 status = hcd->driver->hub_status_data(hcd, buffer);
2144 if (status != 0) {
2145 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2146 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2147 status = -EBUSY;
2148 }
2149 }
2150 } else {
2151 spin_lock_irq(&hcd_root_hub_lock);
2152 if (!HCD_DEAD(hcd)) {
2153 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2154 hcd->state = old_state;
2155 }
2156 spin_unlock_irq(&hcd_root_hub_lock);
2157 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2158 "suspend", status);
2159 }
2160 return status;
2161}
2162
2163int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2164{
2165 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2166 int status;
2167 int old_state = hcd->state;
2168
2169 dev_dbg(&rhdev->dev, "usb %sresume\n",
2170 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2171 if (HCD_DEAD(hcd)) {
2172 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2173 return 0;
2174 }
2175
2176 if (!PMSG_IS_AUTO(msg)) {
2177 status = usb_phy_roothub_resume(hcd->self.sysdev,
2178 hcd->phy_roothub);
2179 if (status)
2180 return status;
2181 }
2182
2183 if (!hcd->driver->bus_resume)
2184 return -ENOENT;
2185 if (HCD_RH_RUNNING(hcd))
2186 return 0;
2187
2188 hcd->state = HC_STATE_RESUMING;
2189 status = hcd->driver->bus_resume(hcd);
2190 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2191 if (status == 0)
2192 status = usb_phy_roothub_calibrate(hcd->phy_roothub);
2193
2194 if (status == 0) {
2195 struct usb_device *udev;
2196 int port1;
2197
2198 spin_lock_irq(&hcd_root_hub_lock);
2199 if (!HCD_DEAD(hcd)) {
2200 usb_set_device_state(rhdev, rhdev->actconfig
2201 ? USB_STATE_CONFIGURED
2202 : USB_STATE_ADDRESS);
2203 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2204 hcd->state = HC_STATE_RUNNING;
2205 }
2206 spin_unlock_irq(&hcd_root_hub_lock);
2207
2208 /*
2209 * Check whether any of the enabled ports on the root hub are
2210 * unsuspended. If they are then a TRSMRCY delay is needed
2211 * (this is what the USB-2 spec calls a "global resume").
2212 * Otherwise we can skip the delay.
2213 */
2214 usb_hub_for_each_child(rhdev, port1, udev) {
2215 if (udev->state != USB_STATE_NOTATTACHED &&
2216 !udev->port_is_suspended) {
2217 usleep_range(10000, 11000); /* TRSMRCY */
2218 break;
2219 }
2220 }
2221 } else {
2222 hcd->state = old_state;
2223 usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
2224 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2225 "resume", status);
2226 if (status != -ESHUTDOWN)
2227 usb_hc_died(hcd);
2228 }
2229 return status;
2230}
2231
2232/* Workqueue routine for root-hub remote wakeup */
2233static void hcd_resume_work(struct work_struct *work)
2234{
2235 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2236 struct usb_device *udev = hcd->self.root_hub;
2237
2238 usb_remote_wakeup(udev);
2239}
2240
2241/**
2242 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2243 * @hcd: host controller for this root hub
2244 *
2245 * The USB host controller calls this function when its root hub is
2246 * suspended (with the remote wakeup feature enabled) and a remote
2247 * wakeup request is received. The routine submits a workqueue request
2248 * to resume the root hub (that is, manage its downstream ports again).
2249 */
2250void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2251{
2252 unsigned long flags;
2253
2254 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2255 if (hcd->rh_registered) {
2256 pm_wakeup_event(&hcd->self.root_hub->dev, 0);
2257 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2258 queue_work(pm_wq, &hcd->wakeup_work);
2259 }
2260 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2261}
2262EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2263
2264#endif /* CONFIG_PM */
2265
2266/*-------------------------------------------------------------------------*/
2267
2268#ifdef CONFIG_USB_OTG
2269
2270/**
2271 * usb_bus_start_enum - start immediate enumeration (for OTG)
2272 * @bus: the bus (must use hcd framework)
2273 * @port_num: 1-based number of port; usually bus->otg_port
2274 * Context: in_interrupt()
2275 *
2276 * Starts enumeration, with an immediate reset followed later by
2277 * hub_wq identifying and possibly configuring the device.
2278 * This is needed by OTG controller drivers, where it helps meet
2279 * HNP protocol timing requirements for starting a port reset.
2280 *
2281 * Return: 0 if successful.
2282 */
2283int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2284{
2285 struct usb_hcd *hcd;
2286 int status = -EOPNOTSUPP;
2287
2288 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2289 * boards with root hubs hooked up to internal devices (instead of
2290 * just the OTG port) may need more attention to resetting...
2291 */
2292 hcd = bus_to_hcd(bus);
2293 if (port_num && hcd->driver->start_port_reset)
2294 status = hcd->driver->start_port_reset(hcd, port_num);
2295
2296 /* allocate hub_wq shortly after (first) root port reset finishes;
2297 * it may issue others, until at least 50 msecs have passed.
2298 */
2299 if (status == 0)
2300 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2301 return status;
2302}
2303EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2304
2305#endif
2306
2307/*-------------------------------------------------------------------------*/
2308
2309/**
2310 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2311 * @irq: the IRQ being raised
2312 * @__hcd: pointer to the HCD whose IRQ is being signaled
2313 *
2314 * If the controller isn't HALTed, calls the driver's irq handler.
2315 * Checks whether the controller is now dead.
2316 *
2317 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2318 */
2319irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2320{
2321 struct usb_hcd *hcd = __hcd;
2322 irqreturn_t rc;
2323
2324 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2325 rc = IRQ_NONE;
2326 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2327 rc = IRQ_NONE;
2328 else
2329 rc = IRQ_HANDLED;
2330
2331 return rc;
2332}
2333EXPORT_SYMBOL_GPL(usb_hcd_irq);
2334
2335/*-------------------------------------------------------------------------*/
2336
2337/* Workqueue routine for when the root-hub has died. */
2338static void hcd_died_work(struct work_struct *work)
2339{
2340 struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work);
2341 static char *env[] = {
2342 "ERROR=DEAD",
2343 NULL
2344 };
2345
2346 /* Notify user space that the host controller has died */
2347 kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env);
2348}
2349
2350/**
2351 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2352 * @hcd: pointer to the HCD representing the controller
2353 *
2354 * This is called by bus glue to report a USB host controller that died
2355 * while operations may still have been pending. It's called automatically
2356 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2357 *
2358 * Only call this function with the primary HCD.
2359 */
2360void usb_hc_died (struct usb_hcd *hcd)
2361{
2362 unsigned long flags;
2363
2364 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2365
2366 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2367 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2368 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2369 if (hcd->rh_registered) {
2370 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2371
2372 /* make hub_wq clean up old urbs and devices */
2373 usb_set_device_state (hcd->self.root_hub,
2374 USB_STATE_NOTATTACHED);
2375 usb_kick_hub_wq(hcd->self.root_hub);
2376 }
2377 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2378 hcd = hcd->shared_hcd;
2379 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2380 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2381 if (hcd->rh_registered) {
2382 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2383
2384 /* make hub_wq clean up old urbs and devices */
2385 usb_set_device_state(hcd->self.root_hub,
2386 USB_STATE_NOTATTACHED);
2387 usb_kick_hub_wq(hcd->self.root_hub);
2388 }
2389 }
2390
2391 /* Handle the case where this function gets called with a shared HCD */
2392 if (usb_hcd_is_primary_hcd(hcd))
2393 schedule_work(&hcd->died_work);
2394 else
2395 schedule_work(&hcd->primary_hcd->died_work);
2396
2397 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2398 /* Make sure that the other roothub is also deallocated. */
2399}
2400EXPORT_SYMBOL_GPL (usb_hc_died);
2401
2402/*-------------------------------------------------------------------------*/
2403
2404static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2405{
2406
2407 spin_lock_init(&bh->lock);
2408 INIT_LIST_HEAD(&bh->head);
2409 tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
2410}
2411
2412struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
2413 struct device *sysdev, struct device *dev, const char *bus_name,
2414 struct usb_hcd *primary_hcd)
2415{
2416 struct usb_hcd *hcd;
2417
2418 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2419 if (!hcd)
2420 return NULL;
2421 if (primary_hcd == NULL) {
2422 hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
2423 GFP_KERNEL);
2424 if (!hcd->address0_mutex) {
2425 kfree(hcd);
2426 dev_dbg(dev, "hcd address0 mutex alloc failed\n");
2427 return NULL;
2428 }
2429 mutex_init(hcd->address0_mutex);
2430 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2431 GFP_KERNEL);
2432 if (!hcd->bandwidth_mutex) {
2433 kfree(hcd->address0_mutex);
2434 kfree(hcd);
2435 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2436 return NULL;
2437 }
2438 mutex_init(hcd->bandwidth_mutex);
2439 dev_set_drvdata(dev, hcd);
2440 } else {
2441 mutex_lock(&usb_port_peer_mutex);
2442 hcd->address0_mutex = primary_hcd->address0_mutex;
2443 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2444 hcd->primary_hcd = primary_hcd;
2445 primary_hcd->primary_hcd = primary_hcd;
2446 hcd->shared_hcd = primary_hcd;
2447 primary_hcd->shared_hcd = hcd;
2448 mutex_unlock(&usb_port_peer_mutex);
2449 }
2450
2451 kref_init(&hcd->kref);
2452
2453 usb_bus_init(&hcd->self);
2454 hcd->self.controller = dev;
2455 hcd->self.sysdev = sysdev;
2456 hcd->self.bus_name = bus_name;
2457
2458 timer_setup(&hcd->rh_timer, rh_timer_func, 0);
2459#ifdef CONFIG_PM
2460 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2461#endif
2462
2463 INIT_WORK(&hcd->died_work, hcd_died_work);
2464
2465 hcd->driver = driver;
2466 hcd->speed = driver->flags & HCD_MASK;
2467 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2468 "USB Host Controller";
2469 return hcd;
2470}
2471EXPORT_SYMBOL_GPL(__usb_create_hcd);
2472
2473/**
2474 * usb_create_shared_hcd - create and initialize an HCD structure
2475 * @driver: HC driver that will use this hcd
2476 * @dev: device for this HC, stored in hcd->self.controller
2477 * @bus_name: value to store in hcd->self.bus_name
2478 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2479 * PCI device. Only allocate certain resources for the primary HCD
2480 * Context: !in_interrupt()
2481 *
2482 * Allocate a struct usb_hcd, with extra space at the end for the
2483 * HC driver's private data. Initialize the generic members of the
2484 * hcd structure.
2485 *
2486 * Return: On success, a pointer to the created and initialized HCD structure.
2487 * On failure (e.g. if memory is unavailable), %NULL.
2488 */
2489struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2490 struct device *dev, const char *bus_name,
2491 struct usb_hcd *primary_hcd)
2492{
2493 return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
2494}
2495EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2496
2497/**
2498 * usb_create_hcd - create and initialize an HCD structure
2499 * @driver: HC driver that will use this hcd
2500 * @dev: device for this HC, stored in hcd->self.controller
2501 * @bus_name: value to store in hcd->self.bus_name
2502 * Context: !in_interrupt()
2503 *
2504 * Allocate a struct usb_hcd, with extra space at the end for the
2505 * HC driver's private data. Initialize the generic members of the
2506 * hcd structure.
2507 *
2508 * Return: On success, a pointer to the created and initialized HCD
2509 * structure. On failure (e.g. if memory is unavailable), %NULL.
2510 */
2511struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2512 struct device *dev, const char *bus_name)
2513{
2514 return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
2515}
2516EXPORT_SYMBOL_GPL(usb_create_hcd);
2517
2518/*
2519 * Roothubs that share one PCI device must also share the bandwidth mutex.
2520 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2521 * deallocated.
2522 *
2523 * Make sure to deallocate the bandwidth_mutex only when the last HCD is
2524 * freed. When hcd_release() is called for either hcd in a peer set,
2525 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
2526 */
2527static void hcd_release(struct kref *kref)
2528{
2529 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2530
2531 mutex_lock(&usb_port_peer_mutex);
2532 if (hcd->shared_hcd) {
2533 struct usb_hcd *peer = hcd->shared_hcd;
2534
2535 peer->shared_hcd = NULL;
2536 peer->primary_hcd = NULL;
2537 } else {
2538 kfree(hcd->address0_mutex);
2539 kfree(hcd->bandwidth_mutex);
2540 }
2541 mutex_unlock(&usb_port_peer_mutex);
2542 kfree(hcd);
2543}
2544
2545struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2546{
2547 if (hcd)
2548 kref_get (&hcd->kref);
2549 return hcd;
2550}
2551EXPORT_SYMBOL_GPL(usb_get_hcd);
2552
2553void usb_put_hcd (struct usb_hcd *hcd)
2554{
2555 if (hcd)
2556 kref_put (&hcd->kref, hcd_release);
2557}
2558EXPORT_SYMBOL_GPL(usb_put_hcd);
2559
2560int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2561{
2562 if (!hcd->primary_hcd)
2563 return 1;
2564 return hcd == hcd->primary_hcd;
2565}
2566EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2567
2568int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2569{
2570 if (!hcd->driver->find_raw_port_number)
2571 return port1;
2572
2573 return hcd->driver->find_raw_port_number(hcd, port1);
2574}
2575
2576static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2577 unsigned int irqnum, unsigned long irqflags)
2578{
2579 int retval;
2580
2581 if (hcd->driver->irq) {
2582
2583 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2584 hcd->driver->description, hcd->self.busnum);
2585 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2586 hcd->irq_descr, hcd);
2587 if (retval != 0) {
2588 dev_err(hcd->self.controller,
2589 "request interrupt %d failed\n",
2590 irqnum);
2591 return retval;
2592 }
2593 hcd->irq = irqnum;
2594 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2595 (hcd->driver->flags & HCD_MEMORY) ?
2596 "io mem" : "io base",
2597 (unsigned long long)hcd->rsrc_start);
2598 } else {
2599 hcd->irq = 0;
2600 if (hcd->rsrc_start)
2601 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2602 (hcd->driver->flags & HCD_MEMORY) ?
2603 "io mem" : "io base",
2604 (unsigned long long)hcd->rsrc_start);
2605 }
2606 return 0;
2607}
2608
2609/*
2610 * Before we free this root hub, flush in-flight peering attempts
2611 * and disable peer lookups
2612 */
2613static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2614{
2615 struct usb_device *rhdev;
2616
2617 mutex_lock(&usb_port_peer_mutex);
2618 rhdev = hcd->self.root_hub;
2619 hcd->self.root_hub = NULL;
2620 mutex_unlock(&usb_port_peer_mutex);
2621 usb_put_dev(rhdev);
2622}
2623
2624/**
2625 * usb_add_hcd - finish generic HCD structure initialization and register
2626 * @hcd: the usb_hcd structure to initialize
2627 * @irqnum: Interrupt line to allocate
2628 * @irqflags: Interrupt type flags
2629 *
2630 * Finish the remaining parts of generic HCD initialization: allocate the
2631 * buffers of consistent memory, register the bus, request the IRQ line,
2632 * and call the driver's reset() and start() routines.
2633 */
2634int usb_add_hcd(struct usb_hcd *hcd,
2635 unsigned int irqnum, unsigned long irqflags)
2636{
2637 int retval;
2638 struct usb_device *rhdev;
2639
2640 if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
2641 hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
2642 if (IS_ERR(hcd->phy_roothub))
2643 return PTR_ERR(hcd->phy_roothub);
2644
2645 retval = usb_phy_roothub_init(hcd->phy_roothub);
2646 if (retval)
2647 return retval;
2648
2649 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2650 PHY_MODE_USB_HOST_SS);
2651 if (retval)
2652 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2653 PHY_MODE_USB_HOST);
2654 if (retval)
2655 goto err_usb_phy_roothub_power_on;
2656
2657 retval = usb_phy_roothub_power_on(hcd->phy_roothub);
2658 if (retval)
2659 goto err_usb_phy_roothub_power_on;
2660 }
2661
2662 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2663
2664 switch (authorized_default) {
2665 case USB_AUTHORIZE_NONE:
2666 hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
2667 break;
2668
2669 case USB_AUTHORIZE_ALL:
2670 hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
2671 break;
2672
2673 case USB_AUTHORIZE_INTERNAL:
2674 hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
2675 break;
2676
2677 case USB_AUTHORIZE_WIRED:
2678 default:
2679 hcd->dev_policy = hcd->wireless ?
2680 USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
2681 break;
2682 }
2683
2684 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2685
2686 /* per default all interfaces are authorized */
2687 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2688
2689 /* HC is in reset state, but accessible. Now do the one-time init,
2690 * bottom up so that hcds can customize the root hubs before hub_wq
2691 * starts talking to them. (Note, bus id is assigned early too.)
2692 */
2693 retval = hcd_buffer_create(hcd);
2694 if (retval != 0) {
2695 dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
2696 goto err_create_buf;
2697 }
2698
2699 retval = usb_register_bus(&hcd->self);
2700 if (retval < 0)
2701 goto err_register_bus;
2702
2703 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2704 if (rhdev == NULL) {
2705 dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
2706 retval = -ENOMEM;
2707 goto err_allocate_root_hub;
2708 }
2709 mutex_lock(&usb_port_peer_mutex);
2710 hcd->self.root_hub = rhdev;
2711 mutex_unlock(&usb_port_peer_mutex);
2712
2713 rhdev->rx_lanes = 1;
2714 rhdev->tx_lanes = 1;
2715
2716 switch (hcd->speed) {
2717 case HCD_USB11:
2718 rhdev->speed = USB_SPEED_FULL;
2719 break;
2720 case HCD_USB2:
2721 rhdev->speed = USB_SPEED_HIGH;
2722 break;
2723 case HCD_USB25:
2724 rhdev->speed = USB_SPEED_WIRELESS;
2725 break;
2726 case HCD_USB3:
2727 rhdev->speed = USB_SPEED_SUPER;
2728 break;
2729 case HCD_USB32:
2730 rhdev->rx_lanes = 2;
2731 rhdev->tx_lanes = 2;
2732 /* fall through */
2733 case HCD_USB31:
2734 rhdev->speed = USB_SPEED_SUPER_PLUS;
2735 break;
2736 default:
2737 retval = -EINVAL;
2738 goto err_set_rh_speed;
2739 }
2740
2741 /* wakeup flag init defaults to "everything works" for root hubs,
2742 * but drivers can override it in reset() if needed, along with
2743 * recording the overall controller's system wakeup capability.
2744 */
2745 device_set_wakeup_capable(&rhdev->dev, 1);
2746
2747 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2748 * registered. But since the controller can die at any time,
2749 * let's initialize the flag before touching the hardware.
2750 */
2751 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2752
2753 /* "reset" is misnamed; its role is now one-time init. the controller
2754 * should already have been reset (and boot firmware kicked off etc).
2755 */
2756 if (hcd->driver->reset) {
2757 retval = hcd->driver->reset(hcd);
2758 if (retval < 0) {
2759 dev_err(hcd->self.controller, "can't setup: %d\n",
2760 retval);
2761 goto err_hcd_driver_setup;
2762 }
2763 }
2764 hcd->rh_pollable = 1;
2765
2766 retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
2767 if (retval)
2768 goto err_hcd_driver_setup;
2769
2770 /* NOTE: root hub and controller capabilities may not be the same */
2771 if (device_can_wakeup(hcd->self.controller)
2772 && device_can_wakeup(&hcd->self.root_hub->dev))
2773 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2774
2775 /* initialize tasklets */
2776 init_giveback_urb_bh(&hcd->high_prio_bh);
2777 init_giveback_urb_bh(&hcd->low_prio_bh);
2778
2779 /* enable irqs just before we start the controller,
2780 * if the BIOS provides legacy PCI irqs.
2781 */
2782 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2783 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2784 if (retval)
2785 goto err_request_irq;
2786 }
2787
2788 hcd->state = HC_STATE_RUNNING;
2789 retval = hcd->driver->start(hcd);
2790 if (retval < 0) {
2791 dev_err(hcd->self.controller, "startup error %d\n", retval);
2792 goto err_hcd_driver_start;
2793 }
2794
2795 /* starting here, usbcore will pay attention to this root hub */
2796 retval = register_root_hub(hcd);
2797 if (retval != 0)
2798 goto err_register_root_hub;
2799
2800 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2801 usb_hcd_poll_rh_status(hcd);
2802
2803 return retval;
2804
2805err_register_root_hub:
2806 hcd->rh_pollable = 0;
2807 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2808 del_timer_sync(&hcd->rh_timer);
2809 hcd->driver->stop(hcd);
2810 hcd->state = HC_STATE_HALT;
2811 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2812 del_timer_sync(&hcd->rh_timer);
2813err_hcd_driver_start:
2814 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2815 free_irq(irqnum, hcd);
2816err_request_irq:
2817err_hcd_driver_setup:
2818err_set_rh_speed:
2819 usb_put_invalidate_rhdev(hcd);
2820err_allocate_root_hub:
2821 usb_deregister_bus(&hcd->self);
2822err_register_bus:
2823 hcd_buffer_destroy(hcd);
2824err_create_buf:
2825 usb_phy_roothub_power_off(hcd->phy_roothub);
2826err_usb_phy_roothub_power_on:
2827 usb_phy_roothub_exit(hcd->phy_roothub);
2828
2829 return retval;
2830}
2831EXPORT_SYMBOL_GPL(usb_add_hcd);
2832
2833/**
2834 * usb_remove_hcd - shutdown processing for generic HCDs
2835 * @hcd: the usb_hcd structure to remove
2836 * Context: !in_interrupt()
2837 *
2838 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2839 * invoking the HCD's stop() method.
2840 */
2841void usb_remove_hcd(struct usb_hcd *hcd)
2842{
2843 struct usb_device *rhdev = hcd->self.root_hub;
2844
2845 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2846
2847 usb_get_dev(rhdev);
2848 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2849 if (HC_IS_RUNNING (hcd->state))
2850 hcd->state = HC_STATE_QUIESCING;
2851
2852 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2853 spin_lock_irq (&hcd_root_hub_lock);
2854 hcd->rh_registered = 0;
2855 spin_unlock_irq (&hcd_root_hub_lock);
2856
2857#ifdef CONFIG_PM
2858 cancel_work_sync(&hcd->wakeup_work);
2859#endif
2860 cancel_work_sync(&hcd->died_work);
2861
2862 mutex_lock(&usb_bus_idr_lock);
2863 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2864 mutex_unlock(&usb_bus_idr_lock);
2865
2866 /*
2867 * tasklet_kill() isn't needed here because:
2868 * - driver's disconnect() called from usb_disconnect() should
2869 * make sure its URBs are completed during the disconnect()
2870 * callback
2871 *
2872 * - it is too late to run complete() here since driver may have
2873 * been removed already now
2874 */
2875
2876 /* Prevent any more root-hub status calls from the timer.
2877 * The HCD might still restart the timer (if a port status change
2878 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
2879 * the hub_status_data() callback.
2880 */
2881 hcd->rh_pollable = 0;
2882 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2883 del_timer_sync(&hcd->rh_timer);
2884
2885 hcd->driver->stop(hcd);
2886 hcd->state = HC_STATE_HALT;
2887
2888 /* In case the HCD restarted the timer, stop it again. */
2889 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2890 del_timer_sync(&hcd->rh_timer);
2891
2892 if (usb_hcd_is_primary_hcd(hcd)) {
2893 if (hcd->irq > 0)
2894 free_irq(hcd->irq, hcd);
2895 }
2896
2897 usb_deregister_bus(&hcd->self);
2898 hcd_buffer_destroy(hcd);
2899
2900 usb_phy_roothub_power_off(hcd->phy_roothub);
2901 usb_phy_roothub_exit(hcd->phy_roothub);
2902
2903 usb_put_invalidate_rhdev(hcd);
2904 hcd->flags = 0;
2905}
2906EXPORT_SYMBOL_GPL(usb_remove_hcd);
2907
2908void
2909usb_hcd_platform_shutdown(struct platform_device *dev)
2910{
2911 struct usb_hcd *hcd = platform_get_drvdata(dev);
2912
2913 /* No need for pm_runtime_put(), we're shutting down */
2914 pm_runtime_get_sync(&dev->dev);
2915
2916 if (hcd->driver->shutdown)
2917 hcd->driver->shutdown(hcd);
2918}
2919EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
2920
2921int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
2922 dma_addr_t dma, size_t size)
2923{
2924 int err;
2925 void *local_mem;
2926
2927 hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4,
2928 dev_to_node(hcd->self.sysdev),
2929 dev_name(hcd->self.sysdev));
2930 if (IS_ERR(hcd->localmem_pool))
2931 return PTR_ERR(hcd->localmem_pool);
2932
2933 local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
2934 size, MEMREMAP_WC);
2935 if (IS_ERR(local_mem))
2936 return PTR_ERR(local_mem);
2937
2938 /*
2939 * Here we pass a dma_addr_t but the arg type is a phys_addr_t.
2940 * It's not backed by system memory and thus there's no kernel mapping
2941 * for it.
2942 */
2943 err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem,
2944 dma, size, dev_to_node(hcd->self.sysdev));
2945 if (err < 0) {
2946 dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n",
2947 err);
2948 return err;
2949 }
2950
2951 return 0;
2952}
2953EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem);
2954
2955/*-------------------------------------------------------------------------*/
2956
2957#if IS_ENABLED(CONFIG_USB_MON)
2958
2959const struct usb_mon_operations *mon_ops;
2960
2961/*
2962 * The registration is unlocked.
2963 * We do it this way because we do not want to lock in hot paths.
2964 *
2965 * Notice that the code is minimally error-proof. Because usbmon needs
2966 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
2967 */
2968
2969int usb_mon_register(const struct usb_mon_operations *ops)
2970{
2971
2972 if (mon_ops)
2973 return -EBUSY;
2974
2975 mon_ops = ops;
2976 mb();
2977 return 0;
2978}
2979EXPORT_SYMBOL_GPL (usb_mon_register);
2980
2981void usb_mon_deregister (void)
2982{
2983
2984 if (mon_ops == NULL) {
2985 printk(KERN_ERR "USB: monitor was not registered\n");
2986 return;
2987 }
2988 mon_ops = NULL;
2989 mb();
2990}
2991EXPORT_SYMBOL_GPL (usb_mon_deregister);
2992
2993#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */