1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * "splice": joining two ropes together by interweaving their strands.
   4 *
   5 * This is the "extended pipe" functionality, where a pipe is used as
   6 * an arbitrary in-memory buffer. Think of a pipe as a small kernel
   7 * buffer that you can use to transfer data from one end to the other.
   8 *
   9 * The traditional unix read/write is extended with a "splice()" operation
  10 * that transfers data buffers to or from a pipe buffer.
  11 *
  12 * Named by Larry McVoy, original implementation from Linus, extended by
  13 * Jens to support splicing to files, network, direct splicing, etc and
  14 * fixing lots of bugs.
  15 *
  16 * Copyright (C) 2005-2006 Jens Axboe <axboe@kernel.dk>
  17 * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
  18 * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>
  19 *
  20 */
  21#include <linux/bvec.h>
  22#include <linux/fs.h>
  23#include <linux/file.h>
  24#include <linux/pagemap.h>
  25#include <linux/splice.h>
  26#include <linux/memcontrol.h>
  27#include <linux/mm_inline.h>
  28#include <linux/swap.h>
  29#include <linux/writeback.h>
  30#include <linux/export.h>
  31#include <linux/syscalls.h>
  32#include <linux/uio.h>
  33#include <linux/fsnotify.h>
  34#include <linux/security.h>
  35#include <linux/gfp.h>
  36#include <linux/net.h>
  37#include <linux/socket.h>
 
  38#include <linux/sched/signal.h>
  39
  40#include "internal.h"
  41
  42/*
  43 * Splice doesn't support FMODE_NOWAIT. Since pipes may set this flag to
  44 * indicate they support non-blocking reads or writes, we must clear it
  45 * here if set to avoid blocking other users of this pipe if splice is
  46 * being done on it.
  47 */
  48static noinline void noinline pipe_clear_nowait(struct file *file)
  49{
  50	fmode_t fmode = READ_ONCE(file->f_mode);
  51
  52	do {
  53		if (!(fmode & FMODE_NOWAIT))
  54			break;
  55	} while (!try_cmpxchg(&file->f_mode, &fmode, fmode & ~FMODE_NOWAIT));
  56}
  57
  58/*
  59 * Attempt to steal a page from a pipe buffer. This should perhaps go into
  60 * a vm helper function, it's already simplified quite a bit by the
  61 * addition of remove_mapping(). If success is returned, the caller may
  62 * attempt to reuse this page for another destination.
  63 */
  64static bool page_cache_pipe_buf_try_steal(struct pipe_inode_info *pipe,
  65		struct pipe_buffer *buf)
  66{
  67	struct folio *folio = page_folio(buf->page);
  68	struct address_space *mapping;
  69
  70	folio_lock(folio);
  71
  72	mapping = folio_mapping(folio);
  73	if (mapping) {
  74		WARN_ON(!folio_test_uptodate(folio));
  75
  76		/*
  77		 * At least for ext2 with nobh option, we need to wait on
  78		 * writeback completing on this folio, since we'll remove it
  79		 * from the pagecache.  Otherwise truncate wont wait on the
  80		 * folio, allowing the disk blocks to be reused by someone else
  81		 * before we actually wrote our data to them. fs corruption
  82		 * ensues.
  83		 */
  84		folio_wait_writeback(folio);
  85
  86		if (!filemap_release_folio(folio, GFP_KERNEL))
 
  87			goto out_unlock;
  88
  89		/*
  90		 * If we succeeded in removing the mapping, set LRU flag
  91		 * and return good.
  92		 */
  93		if (remove_mapping(mapping, folio)) {
  94			buf->flags |= PIPE_BUF_FLAG_LRU;
  95			return true;
  96		}
  97	}
  98
  99	/*
 100	 * Raced with truncate or failed to remove folio from current
 101	 * address space, unlock and return failure.
 102	 */
 103out_unlock:
 104	folio_unlock(folio);
 105	return false;
 106}
 107
 108static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,
 109					struct pipe_buffer *buf)
 110{
 111	put_page(buf->page);
 112	buf->flags &= ~PIPE_BUF_FLAG_LRU;
 113}
 114
 115/*
 116 * Check whether the contents of buf is OK to access. Since the content
 117 * is a page cache page, IO may be in flight.
 118 */
 119static int page_cache_pipe_buf_confirm(struct pipe_inode_info *pipe,
 120				       struct pipe_buffer *buf)
 121{
 122	struct folio *folio = page_folio(buf->page);
 123	int err;
 124
 125	if (!folio_test_uptodate(folio)) {
 126		folio_lock(folio);
 127
 128		/*
 129		 * Folio got truncated/unhashed. This will cause a 0-byte
 130		 * splice, if this is the first page.
 131		 */
 132		if (!folio->mapping) {
 133			err = -ENODATA;
 134			goto error;
 135		}
 136
 137		/*
 138		 * Uh oh, read-error from disk.
 139		 */
 140		if (!folio_test_uptodate(folio)) {
 141			err = -EIO;
 142			goto error;
 143		}
 144
 145		/* Folio is ok after all, we are done */
 146		folio_unlock(folio);
 
 
 147	}
 148
 149	return 0;
 150error:
 151	folio_unlock(folio);
 152	return err;
 153}
 154
 155const struct pipe_buf_operations page_cache_pipe_buf_ops = {
 156	.confirm	= page_cache_pipe_buf_confirm,
 157	.release	= page_cache_pipe_buf_release,
 158	.try_steal	= page_cache_pipe_buf_try_steal,
 159	.get		= generic_pipe_buf_get,
 
 160};
 161
 162static bool user_page_pipe_buf_try_steal(struct pipe_inode_info *pipe,
 163		struct pipe_buffer *buf)
 164{
 165	if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
 166		return false;
 167
 168	buf->flags |= PIPE_BUF_FLAG_LRU;
 169	return generic_pipe_buf_try_steal(pipe, buf);
 170}
 171
 172static const struct pipe_buf_operations user_page_pipe_buf_ops = {
 173	.release	= page_cache_pipe_buf_release,
 174	.try_steal	= user_page_pipe_buf_try_steal,
 175	.get		= generic_pipe_buf_get,
 
 
 176};
 177
 178static void wakeup_pipe_readers(struct pipe_inode_info *pipe)
 179{
 180	smp_mb();
 181	if (waitqueue_active(&pipe->rd_wait))
 182		wake_up_interruptible(&pipe->rd_wait);
 183	kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 184}
 185
 186/**
 187 * splice_to_pipe - fill passed data into a pipe
 188 * @pipe:	pipe to fill
 189 * @spd:	data to fill
 190 *
 191 * Description:
 192 *    @spd contains a map of pages and len/offset tuples, along with
 193 *    the struct pipe_buf_operations associated with these pages. This
 194 *    function will link that data to the pipe.
 195 *
 196 */
 197ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
 198		       struct splice_pipe_desc *spd)
 199{
 200	unsigned int spd_pages = spd->nr_pages;
 201	unsigned int tail = pipe->tail;
 202	unsigned int head = pipe->head;
 203	unsigned int mask = pipe->ring_size - 1;
 204	ssize_t ret = 0;
 205	int page_nr = 0;
 206
 207	if (!spd_pages)
 208		return 0;
 209
 210	if (unlikely(!pipe->readers)) {
 211		send_sig(SIGPIPE, current, 0);
 212		ret = -EPIPE;
 213		goto out;
 214	}
 215
 216	while (!pipe_full(head, tail, pipe->max_usage)) {
 217		struct pipe_buffer *buf = &pipe->bufs[head & mask];
 
 218
 219		buf->page = spd->pages[page_nr];
 220		buf->offset = spd->partial[page_nr].offset;
 221		buf->len = spd->partial[page_nr].len;
 222		buf->private = spd->partial[page_nr].private;
 223		buf->ops = spd->ops;
 224		buf->flags = 0;
 225
 226		head++;
 227		pipe->head = head;
 228		page_nr++;
 229		ret += buf->len;
 230
 231		if (!--spd->nr_pages)
 232			break;
 233	}
 234
 235	if (!ret)
 236		ret = -EAGAIN;
 237
 238out:
 239	while (page_nr < spd_pages)
 240		spd->spd_release(spd, page_nr++);
 241
 242	return ret;
 243}
 244EXPORT_SYMBOL_GPL(splice_to_pipe);
 245
 246ssize_t add_to_pipe(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
 247{
 248	unsigned int head = pipe->head;
 249	unsigned int tail = pipe->tail;
 250	unsigned int mask = pipe->ring_size - 1;
 251	int ret;
 252
 253	if (unlikely(!pipe->readers)) {
 254		send_sig(SIGPIPE, current, 0);
 255		ret = -EPIPE;
 256	} else if (pipe_full(head, tail, pipe->max_usage)) {
 257		ret = -EAGAIN;
 258	} else {
 259		pipe->bufs[head & mask] = *buf;
 260		pipe->head = head + 1;
 
 261		return buf->len;
 262	}
 263	pipe_buf_release(pipe, buf);
 264	return ret;
 265}
 266EXPORT_SYMBOL(add_to_pipe);
 267
 268/*
 269 * Check if we need to grow the arrays holding pages and partial page
 270 * descriptions.
 271 */
 272int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
 273{
 274	unsigned int max_usage = READ_ONCE(pipe->max_usage);
 275
 276	spd->nr_pages_max = max_usage;
 277	if (max_usage <= PIPE_DEF_BUFFERS)
 278		return 0;
 279
 280	spd->pages = kmalloc_array(max_usage, sizeof(struct page *), GFP_KERNEL);
 281	spd->partial = kmalloc_array(max_usage, sizeof(struct partial_page),
 282				     GFP_KERNEL);
 283
 284	if (spd->pages && spd->partial)
 285		return 0;
 286
 287	kfree(spd->pages);
 288	kfree(spd->partial);
 289	return -ENOMEM;
 290}
 291
 292void splice_shrink_spd(struct splice_pipe_desc *spd)
 293{
 294	if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
 295		return;
 296
 297	kfree(spd->pages);
 298	kfree(spd->partial);
 299}
 300
 301/**
 302 * copy_splice_read -  Copy data from a file and splice the copy into a pipe
 303 * @in: The file to read from
 304 * @ppos: Pointer to the file position to read from
 305 * @pipe: The pipe to splice into
 306 * @len: The amount to splice
 307 * @flags: The SPLICE_F_* flags
 308 *
 309 * This function allocates a bunch of pages sufficient to hold the requested
 310 * amount of data (but limited by the remaining pipe capacity), passes it to
 311 * the file's ->read_iter() to read into and then splices the used pages into
 312 * the pipe.
 313 *
 314 * Return: On success, the number of bytes read will be returned and *@ppos
 315 * will be updated if appropriate; 0 will be returned if there is no more data
 316 * to be read; -EAGAIN will be returned if the pipe had no space, and some
 317 * other negative error code will be returned on error.  A short read may occur
 318 * if the pipe has insufficient space, we reach the end of the data or we hit a
 319 * hole.
 320 */
 321ssize_t copy_splice_read(struct file *in, loff_t *ppos,
 322			 struct pipe_inode_info *pipe,
 323			 size_t len, unsigned int flags)
 324{
 325	struct iov_iter to;
 326	struct bio_vec *bv;
 327	struct kiocb kiocb;
 328	struct page **pages;
 329	ssize_t ret;
 330	size_t used, npages, chunk, remain, keep = 0;
 331	int i;
 332
 333	/* Work out how much data we can actually add into the pipe */
 334	used = pipe_occupancy(pipe->head, pipe->tail);
 335	npages = max_t(ssize_t, pipe->max_usage - used, 0);
 336	len = min_t(size_t, len, npages * PAGE_SIZE);
 337	npages = DIV_ROUND_UP(len, PAGE_SIZE);
 338
 339	bv = kzalloc(array_size(npages, sizeof(bv[0])) +
 340		     array_size(npages, sizeof(struct page *)), GFP_KERNEL);
 341	if (!bv)
 342		return -ENOMEM;
 343
 344	pages = (struct page **)(bv + npages);
 345	npages = alloc_pages_bulk_array(GFP_USER, npages, pages);
 346	if (!npages) {
 347		kfree(bv);
 348		return -ENOMEM;
 349	}
 350
 351	remain = len = min_t(size_t, len, npages * PAGE_SIZE);
 352
 353	for (i = 0; i < npages; i++) {
 354		chunk = min_t(size_t, PAGE_SIZE, remain);
 355		bv[i].bv_page = pages[i];
 356		bv[i].bv_offset = 0;
 357		bv[i].bv_len = chunk;
 358		remain -= chunk;
 359	}
 360
 361	/* Do the I/O */
 362	iov_iter_bvec(&to, ITER_DEST, bv, npages, len);
 363	init_sync_kiocb(&kiocb, in);
 364	kiocb.ki_pos = *ppos;
 365	ret = in->f_op->read_iter(&kiocb, &to);
 366
 367	if (ret > 0) {
 368		keep = DIV_ROUND_UP(ret, PAGE_SIZE);
 369		*ppos = kiocb.ki_pos;
 
 
 
 
 
 
 
 
 
 
 
 370	}
 371
 372	/*
 373	 * Callers of ->splice_read() expect -EAGAIN on "can't put anything in
 374	 * there", rather than -EFAULT.
 375	 */
 376	if (ret == -EFAULT)
 377		ret = -EAGAIN;
 378
 379	/* Free any pages that didn't get touched at all. */
 380	if (keep < npages)
 381		release_pages(pages + keep, npages - keep);
 382
 383	/* Push the remaining pages into the pipe. */
 384	remain = ret;
 385	for (i = 0; i < keep; i++) {
 386		struct pipe_buffer *buf = pipe_head_buf(pipe);
 387
 388		chunk = min_t(size_t, remain, PAGE_SIZE);
 389		*buf = (struct pipe_buffer) {
 390			.ops	= &default_pipe_buf_ops,
 391			.page	= bv[i].bv_page,
 392			.offset	= 0,
 393			.len	= chunk,
 394		};
 395		pipe->head++;
 396		remain -= chunk;
 397	}
 398
 399	kfree(bv);
 400	return ret;
 401}
 402EXPORT_SYMBOL(copy_splice_read);
 403
 404const struct pipe_buf_operations default_pipe_buf_ops = {
 405	.release	= generic_pipe_buf_release,
 406	.try_steal	= generic_pipe_buf_try_steal,
 407	.get		= generic_pipe_buf_get,
 
 
 408};
 409
 
 
 
 
 
 
 410/* Pipe buffer operations for a socket and similar. */
 411const struct pipe_buf_operations nosteal_pipe_buf_ops = {
 412	.release	= generic_pipe_buf_release,
 413	.get		= generic_pipe_buf_get,
 
 
 
 414};
 415EXPORT_SYMBOL(nosteal_pipe_buf_ops);
 416
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 417static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
 418{
 419	smp_mb();
 420	if (waitqueue_active(&pipe->wr_wait))
 421		wake_up_interruptible(&pipe->wr_wait);
 422	kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
 423}
 424
 425/**
 426 * splice_from_pipe_feed - feed available data from a pipe to a file
 427 * @pipe:	pipe to splice from
 428 * @sd:		information to @actor
 429 * @actor:	handler that splices the data
 430 *
 431 * Description:
 432 *    This function loops over the pipe and calls @actor to do the
 433 *    actual moving of a single struct pipe_buffer to the desired
 434 *    destination.  It returns when there's no more buffers left in
 435 *    the pipe or if the requested number of bytes (@sd->total_len)
 436 *    have been copied.  It returns a positive number (one) if the
 437 *    pipe needs to be filled with more data, zero if the required
 438 *    number of bytes have been copied and -errno on error.
 439 *
 440 *    This, together with splice_from_pipe_{begin,end,next}, may be
 441 *    used to implement the functionality of __splice_from_pipe() when
 442 *    locking is required around copying the pipe buffers to the
 443 *    destination.
 444 */
 445static int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
 446			  splice_actor *actor)
 447{
 448	unsigned int head = pipe->head;
 449	unsigned int tail = pipe->tail;
 450	unsigned int mask = pipe->ring_size - 1;
 451	int ret;
 452
 453	while (!pipe_empty(head, tail)) {
 454		struct pipe_buffer *buf = &pipe->bufs[tail & mask];
 455
 456		sd->len = buf->len;
 457		if (sd->len > sd->total_len)
 458			sd->len = sd->total_len;
 459
 460		ret = pipe_buf_confirm(pipe, buf);
 461		if (unlikely(ret)) {
 462			if (ret == -ENODATA)
 463				ret = 0;
 464			return ret;
 465		}
 466
 467		ret = actor(pipe, buf, sd);
 468		if (ret <= 0)
 469			return ret;
 470
 471		buf->offset += ret;
 472		buf->len -= ret;
 473
 474		sd->num_spliced += ret;
 475		sd->len -= ret;
 476		sd->pos += ret;
 477		sd->total_len -= ret;
 478
 479		if (!buf->len) {
 480			pipe_buf_release(pipe, buf);
 481			tail++;
 482			pipe->tail = tail;
 483			if (pipe->files)
 484				sd->need_wakeup = true;
 485		}
 486
 487		if (!sd->total_len)
 488			return 0;
 489	}
 490
 491	return 1;
 492}
 493
 494/* We know we have a pipe buffer, but maybe it's empty? */
 495static inline bool eat_empty_buffer(struct pipe_inode_info *pipe)
 496{
 497	unsigned int tail = pipe->tail;
 498	unsigned int mask = pipe->ring_size - 1;
 499	struct pipe_buffer *buf = &pipe->bufs[tail & mask];
 500
 501	if (unlikely(!buf->len)) {
 502		pipe_buf_release(pipe, buf);
 503		pipe->tail = tail+1;
 504		return true;
 505	}
 506
 507	return false;
 508}
 509
 510/**
 511 * splice_from_pipe_next - wait for some data to splice from
 512 * @pipe:	pipe to splice from
 513 * @sd:		information about the splice operation
 514 *
 515 * Description:
 516 *    This function will wait for some data and return a positive
 517 *    value (one) if pipe buffers are available.  It will return zero
 518 *    or -errno if no more data needs to be spliced.
 519 */
 520static int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
 521{
 522	/*
 523	 * Check for signal early to make process killable when there are
 524	 * always buffers available
 525	 */
 526	if (signal_pending(current))
 527		return -ERESTARTSYS;
 528
 529repeat:
 530	while (pipe_empty(pipe->head, pipe->tail)) {
 531		if (!pipe->writers)
 532			return 0;
 533
 534		if (sd->num_spliced)
 535			return 0;
 536
 537		if (sd->flags & SPLICE_F_NONBLOCK)
 538			return -EAGAIN;
 539
 540		if (signal_pending(current))
 541			return -ERESTARTSYS;
 542
 543		if (sd->need_wakeup) {
 544			wakeup_pipe_writers(pipe);
 545			sd->need_wakeup = false;
 546		}
 547
 548		pipe_wait_readable(pipe);
 549	}
 550
 551	if (eat_empty_buffer(pipe))
 552		goto repeat;
 553
 554	return 1;
 555}
 556
 557/**
 558 * splice_from_pipe_begin - start splicing from pipe
 559 * @sd:		information about the splice operation
 560 *
 561 * Description:
 562 *    This function should be called before a loop containing
 563 *    splice_from_pipe_next() and splice_from_pipe_feed() to
 564 *    initialize the necessary fields of @sd.
 565 */
 566static void splice_from_pipe_begin(struct splice_desc *sd)
 567{
 568	sd->num_spliced = 0;
 569	sd->need_wakeup = false;
 570}
 571
 572/**
 573 * splice_from_pipe_end - finish splicing from pipe
 574 * @pipe:	pipe to splice from
 575 * @sd:		information about the splice operation
 576 *
 577 * Description:
 578 *    This function will wake up pipe writers if necessary.  It should
 579 *    be called after a loop containing splice_from_pipe_next() and
 580 *    splice_from_pipe_feed().
 581 */
 582static void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
 583{
 584	if (sd->need_wakeup)
 585		wakeup_pipe_writers(pipe);
 586}
 587
 588/**
 589 * __splice_from_pipe - splice data from a pipe to given actor
 590 * @pipe:	pipe to splice from
 591 * @sd:		information to @actor
 592 * @actor:	handler that splices the data
 593 *
 594 * Description:
 595 *    This function does little more than loop over the pipe and call
 596 *    @actor to do the actual moving of a single struct pipe_buffer to
 597 *    the desired destination. See pipe_to_file, pipe_to_sendmsg, or
 598 *    pipe_to_user.
 599 *
 600 */
 601ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
 602			   splice_actor *actor)
 603{
 604	int ret;
 605
 606	splice_from_pipe_begin(sd);
 607	do {
 608		cond_resched();
 609		ret = splice_from_pipe_next(pipe, sd);
 610		if (ret > 0)
 611			ret = splice_from_pipe_feed(pipe, sd, actor);
 612	} while (ret > 0);
 613	splice_from_pipe_end(pipe, sd);
 614
 615	return sd->num_spliced ? sd->num_spliced : ret;
 616}
 617EXPORT_SYMBOL(__splice_from_pipe);
 618
 619/**
 620 * splice_from_pipe - splice data from a pipe to a file
 621 * @pipe:	pipe to splice from
 622 * @out:	file to splice to
 623 * @ppos:	position in @out
 624 * @len:	how many bytes to splice
 625 * @flags:	splice modifier flags
 626 * @actor:	handler that splices the data
 627 *
 628 * Description:
 629 *    See __splice_from_pipe. This function locks the pipe inode,
 630 *    otherwise it's identical to __splice_from_pipe().
 631 *
 632 */
 633ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 634			 loff_t *ppos, size_t len, unsigned int flags,
 635			 splice_actor *actor)
 636{
 637	ssize_t ret;
 638	struct splice_desc sd = {
 639		.total_len = len,
 640		.flags = flags,
 641		.pos = *ppos,
 642		.u.file = out,
 643	};
 644
 645	pipe_lock(pipe);
 646	ret = __splice_from_pipe(pipe, &sd, actor);
 647	pipe_unlock(pipe);
 648
 649	return ret;
 650}
 651
 652/**
 653 * iter_file_splice_write - splice data from a pipe to a file
 654 * @pipe:	pipe info
 655 * @out:	file to write to
 656 * @ppos:	position in @out
 657 * @len:	number of bytes to splice
 658 * @flags:	splice modifier flags
 659 *
 660 * Description:
 661 *    Will either move or copy pages (determined by @flags options) from
 662 *    the given pipe inode to the given file.
 663 *    This one is ->write_iter-based.
 664 *
 665 */
 666ssize_t
 667iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 668			  loff_t *ppos, size_t len, unsigned int flags)
 669{
 670	struct splice_desc sd = {
 671		.total_len = len,
 672		.flags = flags,
 673		.pos = *ppos,
 674		.u.file = out,
 675	};
 676	int nbufs = pipe->max_usage;
 677	struct bio_vec *array;
 
 678	ssize_t ret;
 679
 680	if (!out->f_op->write_iter)
 681		return -EINVAL;
 682
 683	array = kcalloc(nbufs, sizeof(struct bio_vec), GFP_KERNEL);
 684	if (unlikely(!array))
 685		return -ENOMEM;
 686
 687	pipe_lock(pipe);
 688
 689	splice_from_pipe_begin(&sd);
 690	while (sd.total_len) {
 691		struct kiocb kiocb;
 692		struct iov_iter from;
 693		unsigned int head, tail, mask;
 694		size_t left;
 695		int n;
 696
 697		ret = splice_from_pipe_next(pipe, &sd);
 698		if (ret <= 0)
 699			break;
 700
 701		if (unlikely(nbufs < pipe->max_usage)) {
 702			kfree(array);
 703			nbufs = pipe->max_usage;
 704			array = kcalloc(nbufs, sizeof(struct bio_vec),
 705					GFP_KERNEL);
 706			if (!array) {
 707				ret = -ENOMEM;
 708				break;
 709			}
 710		}
 711
 712		head = pipe->head;
 713		tail = pipe->tail;
 714		mask = pipe->ring_size - 1;
 715
 716		/* build the vector */
 717		left = sd.total_len;
 718		for (n = 0; !pipe_empty(head, tail) && left && n < nbufs; tail++) {
 719			struct pipe_buffer *buf = &pipe->bufs[tail & mask];
 720			size_t this_len = buf->len;
 721
 722			/* zero-length bvecs are not supported, skip them */
 723			if (!this_len)
 724				continue;
 725			this_len = min(this_len, left);
 
 726
 727			ret = pipe_buf_confirm(pipe, buf);
 728			if (unlikely(ret)) {
 729				if (ret == -ENODATA)
 730					ret = 0;
 731				goto done;
 732			}
 733
 734			bvec_set_page(&array[n], buf->page, this_len,
 735				      buf->offset);
 
 736			left -= this_len;
 737			n++;
 738		}
 739
 740		iov_iter_bvec(&from, ITER_SOURCE, array, n, sd.total_len - left);
 741		init_sync_kiocb(&kiocb, out);
 742		kiocb.ki_pos = sd.pos;
 743		ret = out->f_op->write_iter(&kiocb, &from);
 744		sd.pos = kiocb.ki_pos;
 745		if (ret <= 0)
 746			break;
 747
 748		sd.num_spliced += ret;
 749		sd.total_len -= ret;
 750		*ppos = sd.pos;
 751
 752		/* dismiss the fully eaten buffers, adjust the partial one */
 753		tail = pipe->tail;
 754		while (ret) {
 755			struct pipe_buffer *buf = &pipe->bufs[tail & mask];
 756			if (ret >= buf->len) {
 757				ret -= buf->len;
 758				buf->len = 0;
 759				pipe_buf_release(pipe, buf);
 760				tail++;
 761				pipe->tail = tail;
 762				if (pipe->files)
 763					sd.need_wakeup = true;
 764			} else {
 765				buf->offset += ret;
 766				buf->len -= ret;
 767				ret = 0;
 768			}
 769		}
 770	}
 771done:
 772	kfree(array);
 773	splice_from_pipe_end(pipe, &sd);
 774
 775	pipe_unlock(pipe);
 776
 777	if (sd.num_spliced)
 778		ret = sd.num_spliced;
 779
 780	return ret;
 781}
 782
 783EXPORT_SYMBOL(iter_file_splice_write);
 784
 785#ifdef CONFIG_NET
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 786/**
 787 * splice_to_socket - splice data from a pipe to a socket
 788 * @pipe:	pipe to splice from
 789 * @out:	socket to write to
 790 * @ppos:	position in @out
 791 * @len:	number of bytes to splice
 792 * @flags:	splice modifier flags
 793 *
 794 * Description:
 795 *    Will send @len bytes from the pipe to a network socket. No data copying
 796 *    is involved.
 797 *
 798 */
 799ssize_t splice_to_socket(struct pipe_inode_info *pipe, struct file *out,
 800			 loff_t *ppos, size_t len, unsigned int flags)
 801{
 802	struct socket *sock = sock_from_file(out);
 803	struct bio_vec bvec[16];
 804	struct msghdr msg = {};
 805	ssize_t ret = 0;
 806	size_t spliced = 0;
 807	bool need_wakeup = false;
 808
 809	pipe_lock(pipe);
 810
 811	while (len > 0) {
 812		unsigned int head, tail, mask, bc = 0;
 813		size_t remain = len;
 814
 815		/*
 816		 * Check for signal early to make process killable when there
 817		 * are always buffers available
 818		 */
 819		ret = -ERESTARTSYS;
 820		if (signal_pending(current))
 821			break;
 822
 823		while (pipe_empty(pipe->head, pipe->tail)) {
 824			ret = 0;
 825			if (!pipe->writers)
 826				goto out;
 827
 828			if (spliced)
 829				goto out;
 830
 831			ret = -EAGAIN;
 832			if (flags & SPLICE_F_NONBLOCK)
 833				goto out;
 834
 835			ret = -ERESTARTSYS;
 836			if (signal_pending(current))
 837				goto out;
 838
 839			if (need_wakeup) {
 840				wakeup_pipe_writers(pipe);
 841				need_wakeup = false;
 842			}
 843
 844			pipe_wait_readable(pipe);
 845		}
 846
 847		head = pipe->head;
 848		tail = pipe->tail;
 849		mask = pipe->ring_size - 1;
 850
 851		while (!pipe_empty(head, tail)) {
 852			struct pipe_buffer *buf = &pipe->bufs[tail & mask];
 853			size_t seg;
 854
 855			if (!buf->len) {
 856				tail++;
 857				continue;
 858			}
 859
 860			seg = min_t(size_t, remain, buf->len);
 861
 862			ret = pipe_buf_confirm(pipe, buf);
 863			if (unlikely(ret)) {
 864				if (ret == -ENODATA)
 865					ret = 0;
 866				break;
 867			}
 868
 869			bvec_set_page(&bvec[bc++], buf->page, seg, buf->offset);
 870			remain -= seg;
 871			if (remain == 0 || bc >= ARRAY_SIZE(bvec))
 872				break;
 873			tail++;
 874		}
 875
 876		if (!bc)
 877			break;
 878
 879		msg.msg_flags = MSG_SPLICE_PAGES;
 880		if (flags & SPLICE_F_MORE)
 881			msg.msg_flags |= MSG_MORE;
 882		if (remain && pipe_occupancy(pipe->head, tail) > 0)
 883			msg.msg_flags |= MSG_MORE;
 884		if (out->f_flags & O_NONBLOCK)
 885			msg.msg_flags |= MSG_DONTWAIT;
 886
 887		iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, bvec, bc,
 888			      len - remain);
 889		ret = sock_sendmsg(sock, &msg);
 890		if (ret <= 0)
 891			break;
 892
 893		spliced += ret;
 894		len -= ret;
 895		tail = pipe->tail;
 896		while (ret > 0) {
 897			struct pipe_buffer *buf = &pipe->bufs[tail & mask];
 898			size_t seg = min_t(size_t, ret, buf->len);
 899
 900			buf->offset += seg;
 901			buf->len -= seg;
 902			ret -= seg;
 903
 904			if (!buf->len) {
 905				pipe_buf_release(pipe, buf);
 906				tail++;
 907			}
 908		}
 909
 910		if (tail != pipe->tail) {
 911			pipe->tail = tail;
 912			if (pipe->files)
 913				need_wakeup = true;
 914		}
 915	}
 916
 917out:
 918	pipe_unlock(pipe);
 919	if (need_wakeup)
 920		wakeup_pipe_writers(pipe);
 921	return spliced ?: ret;
 922}
 923#endif
 924
 925static int warn_unsupported(struct file *file, const char *op)
 926{
 927	pr_debug_ratelimited(
 928		"splice %s not supported for file %pD4 (pid: %d comm: %.20s)\n",
 929		op, file, current->pid, current->comm);
 930	return -EINVAL;
 931}
 932
 933/*
 934 * Attempt to initiate a splice from pipe to file.
 935 */
 936static ssize_t do_splice_from(struct pipe_inode_info *pipe, struct file *out,
 937			      loff_t *ppos, size_t len, unsigned int flags)
 938{
 939	if (unlikely(!out->f_op->splice_write))
 940		return warn_unsupported(out, "write");
 941	return out->f_op->splice_write(pipe, out, ppos, len, flags);
 942}
 943
 944/*
 945 * Indicate to the caller that there was a premature EOF when reading from the
 946 * source and the caller didn't indicate they would be sending more data after
 947 * this.
 948 */
 949static void do_splice_eof(struct splice_desc *sd)
 950{
 951	if (sd->splice_eof)
 952		sd->splice_eof(sd);
 953}
 954
 955/*
 956 * Callers already called rw_verify_area() on the entire range.
 957 * No need to call it for sub ranges.
 958 */
 959static ssize_t do_splice_read(struct file *in, loff_t *ppos,
 960			      struct pipe_inode_info *pipe, size_t len,
 961			      unsigned int flags)
 962{
 963	unsigned int p_space;
 
 
 964
 965	if (unlikely(!(in->f_mode & FMODE_READ)))
 966		return -EBADF;
 967	if (!len)
 968		return 0;
 969
 970	/* Don't try to read more the pipe has space for. */
 971	p_space = pipe->max_usage - pipe_occupancy(pipe->head, pipe->tail);
 972	len = min_t(size_t, len, p_space << PAGE_SHIFT);
 973
 974	if (unlikely(len > MAX_RW_COUNT))
 975		len = MAX_RW_COUNT;
 976
 977	if (unlikely(!in->f_op->splice_read))
 978		return warn_unsupported(in, "read");
 979	/*
 980	 * O_DIRECT and DAX don't deal with the pagecache, so we allocate a
 981	 * buffer, copy into it and splice that into the pipe.
 982	 */
 983	if ((in->f_flags & O_DIRECT) || IS_DAX(in->f_mapping->host))
 984		return copy_splice_read(in, ppos, pipe, len, flags);
 985	return in->f_op->splice_read(in, ppos, pipe, len, flags);
 986}
 987
 988/**
 989 * vfs_splice_read - Read data from a file and splice it into a pipe
 990 * @in:		File to splice from
 991 * @ppos:	Input file offset
 992 * @pipe:	Pipe to splice to
 993 * @len:	Number of bytes to splice
 994 * @flags:	Splice modifier flags (SPLICE_F_*)
 995 *
 996 * Splice the requested amount of data from the input file to the pipe.  This
 997 * is synchronous as the caller must hold the pipe lock across the entire
 998 * operation.
 999 *
1000 * If successful, it returns the amount of data spliced, 0 if it hit the EOF or
1001 * a hole and a negative error code otherwise.
1002 */
1003ssize_t vfs_splice_read(struct file *in, loff_t *ppos,
1004			struct pipe_inode_info *pipe, size_t len,
1005			unsigned int flags)
1006{
1007	ssize_t ret;
1008
1009	ret = rw_verify_area(READ, in, ppos, len);
1010	if (unlikely(ret < 0))
1011		return ret;
1012
1013	return do_splice_read(in, ppos, pipe, len, flags);
1014}
1015EXPORT_SYMBOL_GPL(vfs_splice_read);
1016
1017/**
1018 * splice_direct_to_actor - splices data directly between two non-pipes
1019 * @in:		file to splice from
1020 * @sd:		actor information on where to splice to
1021 * @actor:	handles the data splicing
1022 *
1023 * Description:
1024 *    This is a special case helper to splice directly between two
1025 *    points, without requiring an explicit pipe. Internally an allocated
1026 *    pipe is cached in the process, and reused during the lifetime of
1027 *    that process.
1028 *
1029 */
1030ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
1031			       splice_direct_actor *actor)
1032{
1033	struct pipe_inode_info *pipe;
1034	ssize_t ret, bytes;
 
1035	size_t len;
1036	int i, flags, more;
1037
1038	/*
1039	 * We require the input to be seekable, as we don't want to randomly
1040	 * drop data for eg socket -> socket splicing. Use the piped splicing
1041	 * for that!
1042	 */
1043	if (unlikely(!(in->f_mode & FMODE_LSEEK)))
 
1044		return -EINVAL;
1045
1046	/*
1047	 * neither in nor out is a pipe, setup an internal pipe attached to
1048	 * 'out' and transfer the wanted data from 'in' to 'out' through that
1049	 */
1050	pipe = current->splice_pipe;
1051	if (unlikely(!pipe)) {
1052		pipe = alloc_pipe_info();
1053		if (!pipe)
1054			return -ENOMEM;
1055
1056		/*
1057		 * We don't have an immediate reader, but we'll read the stuff
1058		 * out of the pipe right after the splice_to_pipe(). So set
1059		 * PIPE_READERS appropriately.
1060		 */
1061		pipe->readers = 1;
1062
1063		current->splice_pipe = pipe;
1064	}
1065
1066	/*
1067	 * Do the splice.
1068	 */
 
1069	bytes = 0;
1070	len = sd->total_len;
1071
1072	/* Don't block on output, we have to drain the direct pipe. */
1073	flags = sd->flags;
1074	sd->flags &= ~SPLICE_F_NONBLOCK;
1075
1076	/*
1077	 * We signal MORE until we've read sufficient data to fulfill the
1078	 * request and we keep signalling it if the caller set it.
1079	 */
 
1080	more = sd->flags & SPLICE_F_MORE;
1081	sd->flags |= SPLICE_F_MORE;
1082
1083	WARN_ON_ONCE(!pipe_empty(pipe->head, pipe->tail));
1084
1085	while (len) {
1086		size_t read_len;
1087		loff_t pos = sd->pos, prev_pos = pos;
1088
1089		ret = do_splice_read(in, &pos, pipe, len, flags);
1090		if (unlikely(ret <= 0))
1091			goto read_failure;
1092
1093		read_len = ret;
1094		sd->total_len = read_len;
1095
1096		/*
1097		 * If we now have sufficient data to fulfill the request then
1098		 * we clear SPLICE_F_MORE if it was not set initially.
 
1099		 */
1100		if (read_len >= len && !more)
 
 
1101			sd->flags &= ~SPLICE_F_MORE;
1102
1103		/*
1104		 * NOTE: nonblocking mode only applies to the input. We
1105		 * must not do the output in nonblocking mode as then we
1106		 * could get stuck data in the internal pipe:
1107		 */
1108		ret = actor(pipe, sd);
1109		if (unlikely(ret <= 0)) {
1110			sd->pos = prev_pos;
1111			goto out_release;
1112		}
1113
1114		bytes += ret;
1115		len -= ret;
1116		sd->pos = pos;
1117
1118		if (ret < read_len) {
1119			sd->pos = prev_pos + ret;
1120			goto out_release;
1121		}
1122	}
1123
1124done:
1125	pipe->tail = pipe->head = 0;
1126	file_accessed(in);
1127	return bytes;
1128
1129read_failure:
1130	/*
1131	 * If the user did *not* set SPLICE_F_MORE *and* we didn't hit that
1132	 * "use all of len" case that cleared SPLICE_F_MORE, *and* we did a
1133	 * "->splice_in()" that returned EOF (ie zero) *and* we have sent at
1134	 * least 1 byte *then* we will also do the ->splice_eof() call.
1135	 */
1136	if (ret == 0 && !more && len > 0 && bytes)
1137		do_splice_eof(sd);
1138out_release:
1139	/*
1140	 * If we did an incomplete transfer we must release
1141	 * the pipe buffers in question:
1142	 */
1143	for (i = 0; i < pipe->ring_size; i++) {
1144		struct pipe_buffer *buf = &pipe->bufs[i];
1145
1146		if (buf->ops)
1147			pipe_buf_release(pipe, buf);
1148	}
1149
1150	if (!bytes)
1151		bytes = ret;
1152
1153	goto done;
1154}
1155EXPORT_SYMBOL(splice_direct_to_actor);
1156
1157static int direct_splice_actor(struct pipe_inode_info *pipe,
1158			       struct splice_desc *sd)
1159{
1160	struct file *file = sd->u.file;
1161	long ret;
1162
1163	file_start_write(file);
1164	ret = do_splice_from(pipe, file, sd->opos, sd->total_len, sd->flags);
1165	file_end_write(file);
1166	return ret;
1167}
1168
1169static int splice_file_range_actor(struct pipe_inode_info *pipe,
1170					struct splice_desc *sd)
1171{
1172	struct file *file = sd->u.file;
1173
1174	return do_splice_from(pipe, file, sd->opos, sd->total_len, sd->flags);
 
1175}
1176
1177static void direct_file_splice_eof(struct splice_desc *sd)
1178{
1179	struct file *file = sd->u.file;
1180
1181	if (file->f_op->splice_eof)
1182		file->f_op->splice_eof(file);
1183}
1184
1185static ssize_t do_splice_direct_actor(struct file *in, loff_t *ppos,
1186				      struct file *out, loff_t *opos,
1187				      size_t len, unsigned int flags,
1188				      splice_direct_actor *actor)
 
 
 
 
 
 
1189{
1190	struct splice_desc sd = {
1191		.len		= len,
1192		.total_len	= len,
1193		.flags		= flags,
1194		.pos		= *ppos,
1195		.u.file		= out,
1196		.splice_eof	= direct_file_splice_eof,
1197		.opos		= opos,
1198	};
1199	ssize_t ret;
1200
1201	if (unlikely(!(out->f_mode & FMODE_WRITE)))
1202		return -EBADF;
1203
1204	if (unlikely(out->f_flags & O_APPEND))
1205		return -EINVAL;
1206
1207	ret = splice_direct_to_actor(in, &sd, actor);
 
 
 
 
1208	if (ret > 0)
1209		*ppos = sd.pos;
1210
1211	return ret;
1212}
1213/**
1214 * do_splice_direct - splices data directly between two files
1215 * @in:		file to splice from
1216 * @ppos:	input file offset
1217 * @out:	file to splice to
1218 * @opos:	output file offset
1219 * @len:	number of bytes to splice
1220 * @flags:	splice modifier flags
1221 *
1222 * Description:
1223 *    For use by do_sendfile(). splice can easily emulate sendfile, but
1224 *    doing it in the application would incur an extra system call
1225 *    (splice in + splice out, as compared to just sendfile()). So this helper
1226 *    can splice directly through a process-private pipe.
1227 *
1228 * Callers already called rw_verify_area() on the entire range.
1229 */
1230ssize_t do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
1231			 loff_t *opos, size_t len, unsigned int flags)
1232{
1233	return do_splice_direct_actor(in, ppos, out, opos, len, flags,
1234				      direct_splice_actor);
1235}
1236EXPORT_SYMBOL(do_splice_direct);
1237
1238/**
1239 * splice_file_range - splices data between two files for copy_file_range()
1240 * @in:		file to splice from
1241 * @ppos:	input file offset
1242 * @out:	file to splice to
1243 * @opos:	output file offset
1244 * @len:	number of bytes to splice
1245 *
1246 * Description:
1247 *    For use by ->copy_file_range() methods.
1248 *    Like do_splice_direct(), but vfs_copy_file_range() already holds
1249 *    start_file_write() on @out file.
1250 *
1251 * Callers already called rw_verify_area() on the entire range.
1252 */
1253ssize_t splice_file_range(struct file *in, loff_t *ppos, struct file *out,
1254			  loff_t *opos, size_t len)
1255{
1256	lockdep_assert(file_write_started(out));
1257
1258	return do_splice_direct_actor(in, ppos, out, opos,
1259				      min_t(size_t, len, MAX_RW_COUNT),
1260				      0, splice_file_range_actor);
1261}
1262EXPORT_SYMBOL(splice_file_range);
1263
1264static int wait_for_space(struct pipe_inode_info *pipe, unsigned flags)
1265{
1266	for (;;) {
1267		if (unlikely(!pipe->readers)) {
1268			send_sig(SIGPIPE, current, 0);
1269			return -EPIPE;
1270		}
1271		if (!pipe_full(pipe->head, pipe->tail, pipe->max_usage))
1272			return 0;
1273		if (flags & SPLICE_F_NONBLOCK)
1274			return -EAGAIN;
1275		if (signal_pending(current))
1276			return -ERESTARTSYS;
1277		pipe_wait_writable(pipe);
 
 
1278	}
1279}
1280
1281static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
1282			       struct pipe_inode_info *opipe,
1283			       size_t len, unsigned int flags);
1284
1285ssize_t splice_file_to_pipe(struct file *in,
1286			    struct pipe_inode_info *opipe,
1287			    loff_t *offset,
1288			    size_t len, unsigned int flags)
1289{
1290	ssize_t ret;
1291
1292	pipe_lock(opipe);
1293	ret = wait_for_space(opipe, flags);
1294	if (!ret)
1295		ret = do_splice_read(in, offset, opipe, len, flags);
1296	pipe_unlock(opipe);
1297	if (ret > 0)
1298		wakeup_pipe_readers(opipe);
1299	return ret;
1300}
1301
1302/*
1303 * Determine where to splice to/from.
1304 */
1305ssize_t do_splice(struct file *in, loff_t *off_in, struct file *out,
1306		  loff_t *off_out, size_t len, unsigned int flags)
 
1307{
1308	struct pipe_inode_info *ipipe;
1309	struct pipe_inode_info *opipe;
1310	loff_t offset;
1311	ssize_t ret;
1312
1313	if (unlikely(!(in->f_mode & FMODE_READ) ||
1314		     !(out->f_mode & FMODE_WRITE)))
1315		return -EBADF;
1316
1317	ipipe = get_pipe_info(in, true);
1318	opipe = get_pipe_info(out, true);
1319
1320	if (ipipe && opipe) {
1321		if (off_in || off_out)
1322			return -ESPIPE;
1323
 
 
 
 
 
 
1324		/* Splicing to self would be fun, but... */
1325		if (ipipe == opipe)
1326			return -EINVAL;
1327
1328		if ((in->f_flags | out->f_flags) & O_NONBLOCK)
1329			flags |= SPLICE_F_NONBLOCK;
1330
1331		ret = splice_pipe_to_pipe(ipipe, opipe, len, flags);
1332	} else if (ipipe) {
1333		if (off_in)
1334			return -ESPIPE;
1335		if (off_out) {
1336			if (!(out->f_mode & FMODE_PWRITE))
1337				return -EINVAL;
1338			offset = *off_out;
 
1339		} else {
1340			offset = out->f_pos;
1341		}
1342
 
 
 
1343		if (unlikely(out->f_flags & O_APPEND))
1344			return -EINVAL;
1345
1346		ret = rw_verify_area(WRITE, out, &offset, len);
1347		if (unlikely(ret < 0))
1348			return ret;
1349
1350		if (in->f_flags & O_NONBLOCK)
1351			flags |= SPLICE_F_NONBLOCK;
1352
1353		file_start_write(out);
1354		ret = do_splice_from(ipipe, out, &offset, len, flags);
1355		file_end_write(out);
1356
1357		if (!off_out)
1358			out->f_pos = offset;
1359		else
1360			*off_out = offset;
1361	} else if (opipe) {
 
 
 
 
1362		if (off_out)
1363			return -ESPIPE;
1364		if (off_in) {
1365			if (!(in->f_mode & FMODE_PREAD))
1366				return -EINVAL;
1367			offset = *off_in;
 
1368		} else {
1369			offset = in->f_pos;
1370		}
1371
1372		ret = rw_verify_area(READ, in, &offset, len);
1373		if (unlikely(ret < 0))
1374			return ret;
1375
1376		if (out->f_flags & O_NONBLOCK)
1377			flags |= SPLICE_F_NONBLOCK;
1378
1379		ret = splice_file_to_pipe(in, opipe, &offset, len, flags);
1380
1381		if (!off_in)
1382			in->f_pos = offset;
1383		else
1384			*off_in = offset;
1385	} else {
1386		ret = -EINVAL;
1387	}
1388
1389	if (ret > 0) {
1390		/*
1391		 * Generate modify out before access in:
1392		 * do_splice_from() may've already sent modify out,
1393		 * and this ensures the events get merged.
1394		 */
1395		fsnotify_modify(out);
1396		fsnotify_access(in);
1397	}
1398
1399	return ret;
1400}
1401
1402static ssize_t __do_splice(struct file *in, loff_t __user *off_in,
1403			   struct file *out, loff_t __user *off_out,
1404			   size_t len, unsigned int flags)
1405{
1406	struct pipe_inode_info *ipipe;
1407	struct pipe_inode_info *opipe;
1408	loff_t offset, *__off_in = NULL, *__off_out = NULL;
1409	ssize_t ret;
1410
1411	ipipe = get_pipe_info(in, true);
1412	opipe = get_pipe_info(out, true);
1413
1414	if (ipipe) {
1415		if (off_in)
1416			return -ESPIPE;
1417		pipe_clear_nowait(in);
1418	}
1419	if (opipe) {
1420		if (off_out)
1421			return -ESPIPE;
1422		pipe_clear_nowait(out);
1423	}
1424
1425	if (off_out) {
1426		if (copy_from_user(&offset, off_out, sizeof(loff_t)))
1427			return -EFAULT;
1428		__off_out = &offset;
1429	}
1430	if (off_in) {
1431		if (copy_from_user(&offset, off_in, sizeof(loff_t)))
1432			return -EFAULT;
1433		__off_in = &offset;
1434	}
1435
1436	ret = do_splice(in, __off_in, out, __off_out, len, flags);
1437	if (ret < 0)
1438		return ret;
 
1439
1440	if (__off_out && copy_to_user(off_out, __off_out, sizeof(loff_t)))
1441		return -EFAULT;
1442	if (__off_in && copy_to_user(off_in, __off_in, sizeof(loff_t)))
1443		return -EFAULT;
1444
1445	return ret;
1446}
1447
1448static ssize_t iter_to_pipe(struct iov_iter *from,
1449			    struct pipe_inode_info *pipe,
1450			    unsigned int flags)
1451{
1452	struct pipe_buffer buf = {
1453		.ops = &user_page_pipe_buf_ops,
1454		.flags = flags
1455	};
1456	size_t total = 0;
1457	ssize_t ret = 0;
 
1458
1459	while (iov_iter_count(from)) {
1460		struct page *pages[16];
1461		ssize_t left;
1462		size_t start;
1463		int i, n;
1464
1465		left = iov_iter_get_pages2(from, pages, ~0UL, 16, &start);
1466		if (left <= 0) {
1467			ret = left;
1468			break;
1469		}
1470
1471		n = DIV_ROUND_UP(left + start, PAGE_SIZE);
1472		for (i = 0; i < n; i++) {
1473			int size = min_t(int, left, PAGE_SIZE - start);
1474
1475			buf.page = pages[i];
1476			buf.offset = start;
1477			buf.len = size;
1478			ret = add_to_pipe(pipe, &buf);
1479			if (unlikely(ret < 0)) {
1480				iov_iter_revert(from, left);
1481				// this one got dropped by add_to_pipe()
1482				while (++i < n)
1483					put_page(pages[i]);
1484				goto out;
 
1485			}
1486			total += ret;
1487			left -= size;
1488			start = 0;
1489		}
1490	}
1491out:
1492	return total ? total : ret;
1493}
1494
1495static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
1496			struct splice_desc *sd)
1497{
1498	int n = copy_page_to_iter(buf->page, buf->offset, sd->len, sd->u.data);
1499	return n == sd->len ? n : -EFAULT;
1500}
1501
1502/*
1503 * For lack of a better implementation, implement vmsplice() to userspace
1504 * as a simple copy of the pipes pages to the user iov.
1505 */
1506static ssize_t vmsplice_to_user(struct file *file, struct iov_iter *iter,
1507				unsigned int flags)
1508{
1509	struct pipe_inode_info *pipe = get_pipe_info(file, true);
1510	struct splice_desc sd = {
1511		.total_len = iov_iter_count(iter),
1512		.flags = flags,
1513		.u.data = iter
1514	};
1515	ssize_t ret = 0;
1516
 
1517	if (!pipe)
1518		return -EBADF;
1519
1520	pipe_clear_nowait(file);
 
 
 
 
 
 
 
 
 
1521
1522	if (sd.total_len) {
1523		pipe_lock(pipe);
1524		ret = __splice_from_pipe(pipe, &sd, pipe_to_user);
1525		pipe_unlock(pipe);
1526	}
1527
1528	if (ret > 0)
1529		fsnotify_access(file);
1530
1531	return ret;
1532}
1533
1534/*
1535 * vmsplice splices a user address range into a pipe. It can be thought of
1536 * as splice-from-memory, where the regular splice is splice-from-file (or
1537 * to file). In both cases the output is a pipe, naturally.
1538 */
1539static ssize_t vmsplice_to_pipe(struct file *file, struct iov_iter *iter,
1540				unsigned int flags)
1541{
1542	struct pipe_inode_info *pipe;
1543	ssize_t ret = 0;
 
 
 
1544	unsigned buf_flag = 0;
1545
1546	if (flags & SPLICE_F_GIFT)
1547		buf_flag = PIPE_BUF_FLAG_GIFT;
1548
1549	pipe = get_pipe_info(file, true);
1550	if (!pipe)
1551		return -EBADF;
1552
1553	pipe_clear_nowait(file);
 
 
 
1554
1555	pipe_lock(pipe);
1556	ret = wait_for_space(pipe, flags);
1557	if (!ret)
1558		ret = iter_to_pipe(iter, pipe, buf_flag);
1559	pipe_unlock(pipe);
1560	if (ret > 0) {
1561		wakeup_pipe_readers(pipe);
1562		fsnotify_modify(file);
1563	}
1564	return ret;
1565}
1566
1567/*
1568 * Note that vmsplice only really supports true splicing _from_ user memory
1569 * to a pipe, not the other way around. Splicing from user memory is a simple
1570 * operation that can be supported without any funky alignment restrictions
1571 * or nasty vm tricks. We simply map in the user memory and fill them into
1572 * a pipe. The reverse isn't quite as easy, though. There are two possible
1573 * solutions for that:
1574 *
1575 *	- memcpy() the data internally, at which point we might as well just
1576 *	  do a regular read() on the buffer anyway.
1577 *	- Lots of nasty vm tricks, that are neither fast nor flexible (it
1578 *	  has restriction limitations on both ends of the pipe).
1579 *
1580 * Currently we punt and implement it as a normal copy, see pipe_to_user().
1581 *
1582 */
1583SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, uiov,
1584		unsigned long, nr_segs, unsigned int, flags)
1585{
1586	struct iovec iovstack[UIO_FASTIOV];
1587	struct iovec *iov = iovstack;
1588	struct iov_iter iter;
1589	ssize_t error;
1590	int type;
1591
1592	if (unlikely(flags & ~SPLICE_F_ALL))
1593		return -EINVAL;
 
 
 
 
1594
1595	CLASS(fd, f)(fd);
1596	if (fd_empty(f))
1597		return -EBADF;
1598	if (fd_file(f)->f_mode & FMODE_WRITE)
1599		type = ITER_SOURCE;
1600	else if (fd_file(f)->f_mode & FMODE_READ)
1601		type = ITER_DEST;
1602	else
1603		return -EBADF;
1604
1605	error = import_iovec(type, uiov, nr_segs,
1606			     ARRAY_SIZE(iovstack), &iov, &iter);
1607	if (error < 0)
1608		return error;
1609
1610	if (!iov_iter_count(&iter))
1611		error = 0;
1612	else if (type == ITER_SOURCE)
1613		error = vmsplice_to_pipe(fd_file(f), &iter, flags);
1614	else
1615		error = vmsplice_to_user(fd_file(f), &iter, flags);
1616
1617	kfree(iov);
1618	return error;
1619}
1620
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1621SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
1622		int, fd_out, loff_t __user *, off_out,
1623		size_t, len, unsigned int, flags)
1624{
 
 
 
1625	if (unlikely(!len))
1626		return 0;
1627
1628	if (unlikely(flags & ~SPLICE_F_ALL))
1629		return -EINVAL;
1630
1631	CLASS(fd, in)(fd_in);
1632	if (fd_empty(in))
1633		return -EBADF;
1634
1635	CLASS(fd, out)(fd_out);
1636	if (fd_empty(out))
1637		return -EBADF;
1638
1639	return __do_splice(fd_file(in), off_in, fd_file(out), off_out,
1640					    len, flags);
 
 
 
 
 
 
1641}
1642
1643/*
1644 * Make sure there's data to read. Wait for input if we can, otherwise
1645 * return an appropriate error.
1646 */
1647static int ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1648{
1649	int ret;
1650
1651	/*
1652	 * Check the pipe occupancy without the inode lock first. This function
1653	 * is speculative anyways, so missing one is ok.
1654	 */
1655	if (!pipe_empty(pipe->head, pipe->tail))
1656		return 0;
1657
1658	ret = 0;
1659	pipe_lock(pipe);
1660
1661	while (pipe_empty(pipe->head, pipe->tail)) {
1662		if (signal_pending(current)) {
1663			ret = -ERESTARTSYS;
1664			break;
1665		}
1666		if (!pipe->writers)
1667			break;
1668		if (flags & SPLICE_F_NONBLOCK) {
1669			ret = -EAGAIN;
1670			break;
 
 
1671		}
1672		pipe_wait_readable(pipe);
1673	}
1674
1675	pipe_unlock(pipe);
1676	return ret;
1677}
1678
1679/*
1680 * Make sure there's writeable room. Wait for room if we can, otherwise
1681 * return an appropriate error.
1682 */
1683static int opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1684{
1685	int ret;
1686
1687	/*
1688	 * Check pipe occupancy without the inode lock first. This function
1689	 * is speculative anyways, so missing one is ok.
1690	 */
1691	if (!pipe_full(pipe->head, pipe->tail, pipe->max_usage))
1692		return 0;
1693
1694	ret = 0;
1695	pipe_lock(pipe);
1696
1697	while (pipe_full(pipe->head, pipe->tail, pipe->max_usage)) {
1698		if (!pipe->readers) {
1699			send_sig(SIGPIPE, current, 0);
1700			ret = -EPIPE;
1701			break;
1702		}
1703		if (flags & SPLICE_F_NONBLOCK) {
1704			ret = -EAGAIN;
1705			break;
1706		}
1707		if (signal_pending(current)) {
1708			ret = -ERESTARTSYS;
1709			break;
1710		}
1711		pipe_wait_writable(pipe);
 
 
1712	}
1713
1714	pipe_unlock(pipe);
1715	return ret;
1716}
1717
1718/*
1719 * Splice contents of ipipe to opipe.
1720 */
1721static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
1722			       struct pipe_inode_info *opipe,
1723			       size_t len, unsigned int flags)
1724{
1725	struct pipe_buffer *ibuf, *obuf;
1726	unsigned int i_head, o_head;
1727	unsigned int i_tail, o_tail;
1728	unsigned int i_mask, o_mask;
1729	int ret = 0;
1730	bool input_wakeup = false;
1731
1732
1733retry:
1734	ret = ipipe_prep(ipipe, flags);
1735	if (ret)
1736		return ret;
1737
1738	ret = opipe_prep(opipe, flags);
1739	if (ret)
1740		return ret;
1741
1742	/*
1743	 * Potential ABBA deadlock, work around it by ordering lock
1744	 * grabbing by pipe info address. Otherwise two different processes
1745	 * could deadlock (one doing tee from A -> B, the other from B -> A).
1746	 */
1747	pipe_double_lock(ipipe, opipe);
1748
1749	i_tail = ipipe->tail;
1750	i_mask = ipipe->ring_size - 1;
1751	o_head = opipe->head;
1752	o_mask = opipe->ring_size - 1;
1753
1754	do {
1755		size_t o_len;
1756
1757		if (!opipe->readers) {
1758			send_sig(SIGPIPE, current, 0);
1759			if (!ret)
1760				ret = -EPIPE;
1761			break;
1762		}
1763
1764		i_head = ipipe->head;
1765		o_tail = opipe->tail;
1766
1767		if (pipe_empty(i_head, i_tail) && !ipipe->writers)
1768			break;
1769
1770		/*
1771		 * Cannot make any progress, because either the input
1772		 * pipe is empty or the output pipe is full.
1773		 */
1774		if (pipe_empty(i_head, i_tail) ||
1775		    pipe_full(o_head, o_tail, opipe->max_usage)) {
1776			/* Already processed some buffers, break */
1777			if (ret)
1778				break;
1779
1780			if (flags & SPLICE_F_NONBLOCK) {
1781				ret = -EAGAIN;
1782				break;
1783			}
1784
1785			/*
1786			 * We raced with another reader/writer and haven't
1787			 * managed to process any buffers.  A zero return
1788			 * value means EOF, so retry instead.
1789			 */
1790			pipe_unlock(ipipe);
1791			pipe_unlock(opipe);
1792			goto retry;
1793		}
1794
1795		ibuf = &ipipe->bufs[i_tail & i_mask];
1796		obuf = &opipe->bufs[o_head & o_mask];
 
1797
1798		if (len >= ibuf->len) {
1799			/*
1800			 * Simply move the whole buffer from ipipe to opipe
1801			 */
1802			*obuf = *ibuf;
1803			ibuf->ops = NULL;
1804			i_tail++;
1805			ipipe->tail = i_tail;
 
1806			input_wakeup = true;
1807			o_len = obuf->len;
1808			o_head++;
1809			opipe->head = o_head;
1810		} else {
1811			/*
1812			 * Get a reference to this pipe buffer,
1813			 * so we can copy the contents over.
1814			 */
1815			if (!pipe_buf_get(ipipe, ibuf)) {
1816				if (ret == 0)
1817					ret = -EFAULT;
1818				break;
1819			}
1820			*obuf = *ibuf;
1821
1822			/*
1823			 * Don't inherit the gift and merge flags, we need to
1824			 * prevent multiple steals of this page.
1825			 */
1826			obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
1827			obuf->flags &= ~PIPE_BUF_FLAG_CAN_MERGE;
1828
1829			obuf->len = len;
1830			ibuf->offset += len;
1831			ibuf->len -= len;
1832			o_len = len;
1833			o_head++;
1834			opipe->head = o_head;
1835		}
1836		ret += o_len;
1837		len -= o_len;
1838	} while (len);
1839
1840	pipe_unlock(ipipe);
1841	pipe_unlock(opipe);
1842
1843	/*
1844	 * If we put data in the output pipe, wakeup any potential readers.
1845	 */
1846	if (ret > 0)
1847		wakeup_pipe_readers(opipe);
1848
1849	if (input_wakeup)
1850		wakeup_pipe_writers(ipipe);
1851
1852	return ret;
1853}
1854
1855/*
1856 * Link contents of ipipe to opipe.
1857 */
1858static ssize_t link_pipe(struct pipe_inode_info *ipipe,
1859			 struct pipe_inode_info *opipe,
1860			 size_t len, unsigned int flags)
1861{
1862	struct pipe_buffer *ibuf, *obuf;
1863	unsigned int i_head, o_head;
1864	unsigned int i_tail, o_tail;
1865	unsigned int i_mask, o_mask;
1866	ssize_t ret = 0;
1867
1868	/*
1869	 * Potential ABBA deadlock, work around it by ordering lock
1870	 * grabbing by pipe info address. Otherwise two different processes
1871	 * could deadlock (one doing tee from A -> B, the other from B -> A).
1872	 */
1873	pipe_double_lock(ipipe, opipe);
1874
1875	i_tail = ipipe->tail;
1876	i_mask = ipipe->ring_size - 1;
1877	o_head = opipe->head;
1878	o_mask = opipe->ring_size - 1;
1879
1880	do {
1881		if (!opipe->readers) {
1882			send_sig(SIGPIPE, current, 0);
1883			if (!ret)
1884				ret = -EPIPE;
1885			break;
1886		}
1887
1888		i_head = ipipe->head;
1889		o_tail = opipe->tail;
1890
1891		/*
1892		 * If we have iterated all input buffers or run out of
1893		 * output room, break.
1894		 */
1895		if (pipe_empty(i_head, i_tail) ||
1896		    pipe_full(o_head, o_tail, opipe->max_usage))
1897			break;
1898
1899		ibuf = &ipipe->bufs[i_tail & i_mask];
1900		obuf = &opipe->bufs[o_head & o_mask];
1901
1902		/*
1903		 * Get a reference to this pipe buffer,
1904		 * so we can copy the contents over.
1905		 */
1906		if (!pipe_buf_get(ipipe, ibuf)) {
1907			if (ret == 0)
1908				ret = -EFAULT;
1909			break;
1910		}
1911
 
1912		*obuf = *ibuf;
1913
1914		/*
1915		 * Don't inherit the gift and merge flag, we need to prevent
1916		 * multiple steals of this page.
1917		 */
1918		obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
1919		obuf->flags &= ~PIPE_BUF_FLAG_CAN_MERGE;
1920
1921		if (obuf->len > len)
1922			obuf->len = len;
 
 
1923		ret += obuf->len;
1924		len -= obuf->len;
1925
1926		o_head++;
1927		opipe->head = o_head;
1928		i_tail++;
1929	} while (len);
1930
 
 
 
 
 
 
 
1931	pipe_unlock(ipipe);
1932	pipe_unlock(opipe);
1933
1934	/*
1935	 * If we put data in the output pipe, wakeup any potential readers.
1936	 */
1937	if (ret > 0)
1938		wakeup_pipe_readers(opipe);
1939
1940	return ret;
1941}
1942
1943/*
1944 * This is a tee(1) implementation that works on pipes. It doesn't copy
1945 * any data, it simply references the 'in' pages on the 'out' pipe.
1946 * The 'flags' used are the SPLICE_F_* variants, currently the only
1947 * applicable one is SPLICE_F_NONBLOCK.
1948 */
1949ssize_t do_tee(struct file *in, struct file *out, size_t len,
1950	       unsigned int flags)
1951{
1952	struct pipe_inode_info *ipipe = get_pipe_info(in, true);
1953	struct pipe_inode_info *opipe = get_pipe_info(out, true);
1954	ssize_t ret = -EINVAL;
1955
1956	if (unlikely(!(in->f_mode & FMODE_READ) ||
1957		     !(out->f_mode & FMODE_WRITE)))
1958		return -EBADF;
1959
1960	/*
1961	 * Duplicate the contents of ipipe to opipe without actually
1962	 * copying the data.
1963	 */
1964	if (ipipe && opipe && ipipe != opipe) {
1965		if ((in->f_flags | out->f_flags) & O_NONBLOCK)
1966			flags |= SPLICE_F_NONBLOCK;
1967
1968		/*
1969		 * Keep going, unless we encounter an error. The ipipe/opipe
1970		 * ordering doesn't really matter.
1971		 */
1972		ret = ipipe_prep(ipipe, flags);
1973		if (!ret) {
1974			ret = opipe_prep(opipe, flags);
1975			if (!ret)
1976				ret = link_pipe(ipipe, opipe, len, flags);
1977		}
1978	}
1979
1980	if (ret > 0) {
1981		fsnotify_access(in);
1982		fsnotify_modify(out);
1983	}
1984
1985	return ret;
1986}
1987
1988SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
1989{
 
 
 
1990	if (unlikely(flags & ~SPLICE_F_ALL))
1991		return -EINVAL;
1992
1993	if (unlikely(!len))
1994		return 0;
1995
1996	CLASS(fd, in)(fdin);
1997	if (fd_empty(in))
1998		return -EBADF;
1999
2000	CLASS(fd, out)(fdout);
2001	if (fd_empty(out))
2002		return -EBADF;
 
 
 
 
 
 
 
2003
2004	return do_tee(fd_file(in), fd_file(out), len, flags);
2005}