Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2// SPI init/core code
3//
4// Copyright (C) 2005 David Brownell
5// Copyright (C) 2008 Secret Lab Technologies Ltd.
6
7#include <linux/acpi.h>
8#include <linux/cache.h>
9#include <linux/clk/clk-conf.h>
10#include <linux/delay.h>
11#include <linux/device.h>
12#include <linux/dmaengine.h>
13#include <linux/dma-mapping.h>
14#include <linux/export.h>
15#include <linux/gpio/consumer.h>
16#include <linux/highmem.h>
17#include <linux/idr.h>
18#include <linux/init.h>
19#include <linux/ioport.h>
20#include <linux/kernel.h>
21#include <linux/kthread.h>
22#include <linux/mod_devicetable.h>
23#include <linux/mutex.h>
24#include <linux/of_device.h>
25#include <linux/of_irq.h>
26#include <linux/percpu.h>
27#include <linux/platform_data/x86/apple.h>
28#include <linux/pm_domain.h>
29#include <linux/pm_runtime.h>
30#include <linux/property.h>
31#include <linux/ptp_clock_kernel.h>
32#include <linux/sched/rt.h>
33#include <linux/slab.h>
34#include <linux/spi/spi.h>
35#include <linux/spi/spi-mem.h>
36#include <uapi/linux/sched/types.h>
37
38#define CREATE_TRACE_POINTS
39#include <trace/events/spi.h>
40EXPORT_TRACEPOINT_SYMBOL(spi_transfer_start);
41EXPORT_TRACEPOINT_SYMBOL(spi_transfer_stop);
42
43#include "internals.h"
44
45static DEFINE_IDR(spi_master_idr);
46
47static void spidev_release(struct device *dev)
48{
49 struct spi_device *spi = to_spi_device(dev);
50
51 spi_controller_put(spi->controller);
52 kfree(spi->driver_override);
53 free_percpu(spi->pcpu_statistics);
54 kfree(spi);
55}
56
57static ssize_t
58modalias_show(struct device *dev, struct device_attribute *a, char *buf)
59{
60 const struct spi_device *spi = to_spi_device(dev);
61 int len;
62
63 len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
64 if (len != -ENODEV)
65 return len;
66
67 return sysfs_emit(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
68}
69static DEVICE_ATTR_RO(modalias);
70
71static ssize_t driver_override_store(struct device *dev,
72 struct device_attribute *a,
73 const char *buf, size_t count)
74{
75 struct spi_device *spi = to_spi_device(dev);
76 int ret;
77
78 ret = driver_set_override(dev, &spi->driver_override, buf, count);
79 if (ret)
80 return ret;
81
82 return count;
83}
84
85static ssize_t driver_override_show(struct device *dev,
86 struct device_attribute *a, char *buf)
87{
88 const struct spi_device *spi = to_spi_device(dev);
89 ssize_t len;
90
91 device_lock(dev);
92 len = sysfs_emit(buf, "%s\n", spi->driver_override ? : "");
93 device_unlock(dev);
94 return len;
95}
96static DEVICE_ATTR_RW(driver_override);
97
98static struct spi_statistics __percpu *spi_alloc_pcpu_stats(struct device *dev)
99{
100 struct spi_statistics __percpu *pcpu_stats;
101
102 if (dev)
103 pcpu_stats = devm_alloc_percpu(dev, struct spi_statistics);
104 else
105 pcpu_stats = alloc_percpu_gfp(struct spi_statistics, GFP_KERNEL);
106
107 if (pcpu_stats) {
108 int cpu;
109
110 for_each_possible_cpu(cpu) {
111 struct spi_statistics *stat;
112
113 stat = per_cpu_ptr(pcpu_stats, cpu);
114 u64_stats_init(&stat->syncp);
115 }
116 }
117 return pcpu_stats;
118}
119
120static ssize_t spi_emit_pcpu_stats(struct spi_statistics __percpu *stat,
121 char *buf, size_t offset)
122{
123 u64 val = 0;
124 int i;
125
126 for_each_possible_cpu(i) {
127 const struct spi_statistics *pcpu_stats;
128 u64_stats_t *field;
129 unsigned int start;
130 u64 inc;
131
132 pcpu_stats = per_cpu_ptr(stat, i);
133 field = (void *)pcpu_stats + offset;
134 do {
135 start = u64_stats_fetch_begin(&pcpu_stats->syncp);
136 inc = u64_stats_read(field);
137 } while (u64_stats_fetch_retry(&pcpu_stats->syncp, start));
138 val += inc;
139 }
140 return sysfs_emit(buf, "%llu\n", val);
141}
142
143#define SPI_STATISTICS_ATTRS(field, file) \
144static ssize_t spi_controller_##field##_show(struct device *dev, \
145 struct device_attribute *attr, \
146 char *buf) \
147{ \
148 struct spi_controller *ctlr = container_of(dev, \
149 struct spi_controller, dev); \
150 return spi_statistics_##field##_show(ctlr->pcpu_statistics, buf); \
151} \
152static struct device_attribute dev_attr_spi_controller_##field = { \
153 .attr = { .name = file, .mode = 0444 }, \
154 .show = spi_controller_##field##_show, \
155}; \
156static ssize_t spi_device_##field##_show(struct device *dev, \
157 struct device_attribute *attr, \
158 char *buf) \
159{ \
160 struct spi_device *spi = to_spi_device(dev); \
161 return spi_statistics_##field##_show(spi->pcpu_statistics, buf); \
162} \
163static struct device_attribute dev_attr_spi_device_##field = { \
164 .attr = { .name = file, .mode = 0444 }, \
165 .show = spi_device_##field##_show, \
166}
167
168#define SPI_STATISTICS_SHOW_NAME(name, file, field) \
169static ssize_t spi_statistics_##name##_show(struct spi_statistics __percpu *stat, \
170 char *buf) \
171{ \
172 return spi_emit_pcpu_stats(stat, buf, \
173 offsetof(struct spi_statistics, field)); \
174} \
175SPI_STATISTICS_ATTRS(name, file)
176
177#define SPI_STATISTICS_SHOW(field) \
178 SPI_STATISTICS_SHOW_NAME(field, __stringify(field), \
179 field)
180
181SPI_STATISTICS_SHOW(messages);
182SPI_STATISTICS_SHOW(transfers);
183SPI_STATISTICS_SHOW(errors);
184SPI_STATISTICS_SHOW(timedout);
185
186SPI_STATISTICS_SHOW(spi_sync);
187SPI_STATISTICS_SHOW(spi_sync_immediate);
188SPI_STATISTICS_SHOW(spi_async);
189
190SPI_STATISTICS_SHOW(bytes);
191SPI_STATISTICS_SHOW(bytes_rx);
192SPI_STATISTICS_SHOW(bytes_tx);
193
194#define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \
195 SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \
196 "transfer_bytes_histo_" number, \
197 transfer_bytes_histo[index])
198SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1");
199SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3");
200SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7");
201SPI_STATISTICS_TRANSFER_BYTES_HISTO(3, "8-15");
202SPI_STATISTICS_TRANSFER_BYTES_HISTO(4, "16-31");
203SPI_STATISTICS_TRANSFER_BYTES_HISTO(5, "32-63");
204SPI_STATISTICS_TRANSFER_BYTES_HISTO(6, "64-127");
205SPI_STATISTICS_TRANSFER_BYTES_HISTO(7, "128-255");
206SPI_STATISTICS_TRANSFER_BYTES_HISTO(8, "256-511");
207SPI_STATISTICS_TRANSFER_BYTES_HISTO(9, "512-1023");
208SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047");
209SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095");
210SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191");
211SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383");
212SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
213SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
214SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
215
216SPI_STATISTICS_SHOW(transfers_split_maxsize);
217
218static struct attribute *spi_dev_attrs[] = {
219 &dev_attr_modalias.attr,
220 &dev_attr_driver_override.attr,
221 NULL,
222};
223
224static const struct attribute_group spi_dev_group = {
225 .attrs = spi_dev_attrs,
226};
227
228static struct attribute *spi_device_statistics_attrs[] = {
229 &dev_attr_spi_device_messages.attr,
230 &dev_attr_spi_device_transfers.attr,
231 &dev_attr_spi_device_errors.attr,
232 &dev_attr_spi_device_timedout.attr,
233 &dev_attr_spi_device_spi_sync.attr,
234 &dev_attr_spi_device_spi_sync_immediate.attr,
235 &dev_attr_spi_device_spi_async.attr,
236 &dev_attr_spi_device_bytes.attr,
237 &dev_attr_spi_device_bytes_rx.attr,
238 &dev_attr_spi_device_bytes_tx.attr,
239 &dev_attr_spi_device_transfer_bytes_histo0.attr,
240 &dev_attr_spi_device_transfer_bytes_histo1.attr,
241 &dev_attr_spi_device_transfer_bytes_histo2.attr,
242 &dev_attr_spi_device_transfer_bytes_histo3.attr,
243 &dev_attr_spi_device_transfer_bytes_histo4.attr,
244 &dev_attr_spi_device_transfer_bytes_histo5.attr,
245 &dev_attr_spi_device_transfer_bytes_histo6.attr,
246 &dev_attr_spi_device_transfer_bytes_histo7.attr,
247 &dev_attr_spi_device_transfer_bytes_histo8.attr,
248 &dev_attr_spi_device_transfer_bytes_histo9.attr,
249 &dev_attr_spi_device_transfer_bytes_histo10.attr,
250 &dev_attr_spi_device_transfer_bytes_histo11.attr,
251 &dev_attr_spi_device_transfer_bytes_histo12.attr,
252 &dev_attr_spi_device_transfer_bytes_histo13.attr,
253 &dev_attr_spi_device_transfer_bytes_histo14.attr,
254 &dev_attr_spi_device_transfer_bytes_histo15.attr,
255 &dev_attr_spi_device_transfer_bytes_histo16.attr,
256 &dev_attr_spi_device_transfers_split_maxsize.attr,
257 NULL,
258};
259
260static const struct attribute_group spi_device_statistics_group = {
261 .name = "statistics",
262 .attrs = spi_device_statistics_attrs,
263};
264
265static const struct attribute_group *spi_dev_groups[] = {
266 &spi_dev_group,
267 &spi_device_statistics_group,
268 NULL,
269};
270
271static struct attribute *spi_controller_statistics_attrs[] = {
272 &dev_attr_spi_controller_messages.attr,
273 &dev_attr_spi_controller_transfers.attr,
274 &dev_attr_spi_controller_errors.attr,
275 &dev_attr_spi_controller_timedout.attr,
276 &dev_attr_spi_controller_spi_sync.attr,
277 &dev_attr_spi_controller_spi_sync_immediate.attr,
278 &dev_attr_spi_controller_spi_async.attr,
279 &dev_attr_spi_controller_bytes.attr,
280 &dev_attr_spi_controller_bytes_rx.attr,
281 &dev_attr_spi_controller_bytes_tx.attr,
282 &dev_attr_spi_controller_transfer_bytes_histo0.attr,
283 &dev_attr_spi_controller_transfer_bytes_histo1.attr,
284 &dev_attr_spi_controller_transfer_bytes_histo2.attr,
285 &dev_attr_spi_controller_transfer_bytes_histo3.attr,
286 &dev_attr_spi_controller_transfer_bytes_histo4.attr,
287 &dev_attr_spi_controller_transfer_bytes_histo5.attr,
288 &dev_attr_spi_controller_transfer_bytes_histo6.attr,
289 &dev_attr_spi_controller_transfer_bytes_histo7.attr,
290 &dev_attr_spi_controller_transfer_bytes_histo8.attr,
291 &dev_attr_spi_controller_transfer_bytes_histo9.attr,
292 &dev_attr_spi_controller_transfer_bytes_histo10.attr,
293 &dev_attr_spi_controller_transfer_bytes_histo11.attr,
294 &dev_attr_spi_controller_transfer_bytes_histo12.attr,
295 &dev_attr_spi_controller_transfer_bytes_histo13.attr,
296 &dev_attr_spi_controller_transfer_bytes_histo14.attr,
297 &dev_attr_spi_controller_transfer_bytes_histo15.attr,
298 &dev_attr_spi_controller_transfer_bytes_histo16.attr,
299 &dev_attr_spi_controller_transfers_split_maxsize.attr,
300 NULL,
301};
302
303static const struct attribute_group spi_controller_statistics_group = {
304 .name = "statistics",
305 .attrs = spi_controller_statistics_attrs,
306};
307
308static const struct attribute_group *spi_master_groups[] = {
309 &spi_controller_statistics_group,
310 NULL,
311};
312
313static void spi_statistics_add_transfer_stats(struct spi_statistics __percpu *pcpu_stats,
314 struct spi_transfer *xfer,
315 struct spi_message *msg)
316{
317 int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
318 struct spi_statistics *stats;
319
320 if (l2len < 0)
321 l2len = 0;
322
323 get_cpu();
324 stats = this_cpu_ptr(pcpu_stats);
325 u64_stats_update_begin(&stats->syncp);
326
327 u64_stats_inc(&stats->transfers);
328 u64_stats_inc(&stats->transfer_bytes_histo[l2len]);
329
330 u64_stats_add(&stats->bytes, xfer->len);
331 if (spi_valid_txbuf(msg, xfer))
332 u64_stats_add(&stats->bytes_tx, xfer->len);
333 if (spi_valid_rxbuf(msg, xfer))
334 u64_stats_add(&stats->bytes_rx, xfer->len);
335
336 u64_stats_update_end(&stats->syncp);
337 put_cpu();
338}
339
340/*
341 * modalias support makes "modprobe $MODALIAS" new-style hotplug work,
342 * and the sysfs version makes coldplug work too.
343 */
344static const struct spi_device_id *spi_match_id(const struct spi_device_id *id, const char *name)
345{
346 while (id->name[0]) {
347 if (!strcmp(name, id->name))
348 return id;
349 id++;
350 }
351 return NULL;
352}
353
354const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
355{
356 const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
357
358 return spi_match_id(sdrv->id_table, sdev->modalias);
359}
360EXPORT_SYMBOL_GPL(spi_get_device_id);
361
362const void *spi_get_device_match_data(const struct spi_device *sdev)
363{
364 const void *match;
365
366 match = device_get_match_data(&sdev->dev);
367 if (match)
368 return match;
369
370 return (const void *)spi_get_device_id(sdev)->driver_data;
371}
372EXPORT_SYMBOL_GPL(spi_get_device_match_data);
373
374static int spi_match_device(struct device *dev, const struct device_driver *drv)
375{
376 const struct spi_device *spi = to_spi_device(dev);
377 const struct spi_driver *sdrv = to_spi_driver(drv);
378
379 /* Check override first, and if set, only use the named driver */
380 if (spi->driver_override)
381 return strcmp(spi->driver_override, drv->name) == 0;
382
383 /* Attempt an OF style match */
384 if (of_driver_match_device(dev, drv))
385 return 1;
386
387 /* Then try ACPI */
388 if (acpi_driver_match_device(dev, drv))
389 return 1;
390
391 if (sdrv->id_table)
392 return !!spi_match_id(sdrv->id_table, spi->modalias);
393
394 return strcmp(spi->modalias, drv->name) == 0;
395}
396
397static int spi_uevent(const struct device *dev, struct kobj_uevent_env *env)
398{
399 const struct spi_device *spi = to_spi_device(dev);
400 int rc;
401
402 rc = acpi_device_uevent_modalias(dev, env);
403 if (rc != -ENODEV)
404 return rc;
405
406 return add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
407}
408
409static int spi_probe(struct device *dev)
410{
411 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
412 struct spi_device *spi = to_spi_device(dev);
413 int ret;
414
415 ret = of_clk_set_defaults(dev->of_node, false);
416 if (ret)
417 return ret;
418
419 if (dev->of_node) {
420 spi->irq = of_irq_get(dev->of_node, 0);
421 if (spi->irq == -EPROBE_DEFER)
422 return dev_err_probe(dev, -EPROBE_DEFER, "Failed to get irq\n");
423 if (spi->irq < 0)
424 spi->irq = 0;
425 }
426
427 if (has_acpi_companion(dev) && spi->irq < 0) {
428 struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
429
430 spi->irq = acpi_dev_gpio_irq_get(adev, 0);
431 if (spi->irq == -EPROBE_DEFER)
432 return -EPROBE_DEFER;
433 if (spi->irq < 0)
434 spi->irq = 0;
435 }
436
437 ret = dev_pm_domain_attach(dev, true);
438 if (ret)
439 return ret;
440
441 if (sdrv->probe) {
442 ret = sdrv->probe(spi);
443 if (ret)
444 dev_pm_domain_detach(dev, true);
445 }
446
447 return ret;
448}
449
450static void spi_remove(struct device *dev)
451{
452 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
453
454 if (sdrv->remove)
455 sdrv->remove(to_spi_device(dev));
456
457 dev_pm_domain_detach(dev, true);
458}
459
460static void spi_shutdown(struct device *dev)
461{
462 if (dev->driver) {
463 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
464
465 if (sdrv->shutdown)
466 sdrv->shutdown(to_spi_device(dev));
467 }
468}
469
470const struct bus_type spi_bus_type = {
471 .name = "spi",
472 .dev_groups = spi_dev_groups,
473 .match = spi_match_device,
474 .uevent = spi_uevent,
475 .probe = spi_probe,
476 .remove = spi_remove,
477 .shutdown = spi_shutdown,
478};
479EXPORT_SYMBOL_GPL(spi_bus_type);
480
481/**
482 * __spi_register_driver - register a SPI driver
483 * @owner: owner module of the driver to register
484 * @sdrv: the driver to register
485 * Context: can sleep
486 *
487 * Return: zero on success, else a negative error code.
488 */
489int __spi_register_driver(struct module *owner, struct spi_driver *sdrv)
490{
491 sdrv->driver.owner = owner;
492 sdrv->driver.bus = &spi_bus_type;
493
494 /*
495 * For Really Good Reasons we use spi: modaliases not of:
496 * modaliases for DT so module autoloading won't work if we
497 * don't have a spi_device_id as well as a compatible string.
498 */
499 if (sdrv->driver.of_match_table) {
500 const struct of_device_id *of_id;
501
502 for (of_id = sdrv->driver.of_match_table; of_id->compatible[0];
503 of_id++) {
504 const char *of_name;
505
506 /* Strip off any vendor prefix */
507 of_name = strnchr(of_id->compatible,
508 sizeof(of_id->compatible), ',');
509 if (of_name)
510 of_name++;
511 else
512 of_name = of_id->compatible;
513
514 if (sdrv->id_table) {
515 const struct spi_device_id *spi_id;
516
517 spi_id = spi_match_id(sdrv->id_table, of_name);
518 if (spi_id)
519 continue;
520 } else {
521 if (strcmp(sdrv->driver.name, of_name) == 0)
522 continue;
523 }
524
525 pr_warn("SPI driver %s has no spi_device_id for %s\n",
526 sdrv->driver.name, of_id->compatible);
527 }
528 }
529
530 return driver_register(&sdrv->driver);
531}
532EXPORT_SYMBOL_GPL(__spi_register_driver);
533
534/*-------------------------------------------------------------------------*/
535
536/*
537 * SPI devices should normally not be created by SPI device drivers; that
538 * would make them board-specific. Similarly with SPI controller drivers.
539 * Device registration normally goes into like arch/.../mach.../board-YYY.c
540 * with other readonly (flashable) information about mainboard devices.
541 */
542
543struct boardinfo {
544 struct list_head list;
545 struct spi_board_info board_info;
546};
547
548static LIST_HEAD(board_list);
549static LIST_HEAD(spi_controller_list);
550
551/*
552 * Used to protect add/del operation for board_info list and
553 * spi_controller list, and their matching process also used
554 * to protect object of type struct idr.
555 */
556static DEFINE_MUTEX(board_lock);
557
558/**
559 * spi_alloc_device - Allocate a new SPI device
560 * @ctlr: Controller to which device is connected
561 * Context: can sleep
562 *
563 * Allows a driver to allocate and initialize a spi_device without
564 * registering it immediately. This allows a driver to directly
565 * fill the spi_device with device parameters before calling
566 * spi_add_device() on it.
567 *
568 * Caller is responsible to call spi_add_device() on the returned
569 * spi_device structure to add it to the SPI controller. If the caller
570 * needs to discard the spi_device without adding it, then it should
571 * call spi_dev_put() on it.
572 *
573 * Return: a pointer to the new device, or NULL.
574 */
575struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
576{
577 struct spi_device *spi;
578
579 if (!spi_controller_get(ctlr))
580 return NULL;
581
582 spi = kzalloc(sizeof(*spi), GFP_KERNEL);
583 if (!spi) {
584 spi_controller_put(ctlr);
585 return NULL;
586 }
587
588 spi->pcpu_statistics = spi_alloc_pcpu_stats(NULL);
589 if (!spi->pcpu_statistics) {
590 kfree(spi);
591 spi_controller_put(ctlr);
592 return NULL;
593 }
594
595 spi->controller = ctlr;
596 spi->dev.parent = &ctlr->dev;
597 spi->dev.bus = &spi_bus_type;
598 spi->dev.release = spidev_release;
599 spi->mode = ctlr->buswidth_override_bits;
600
601 device_initialize(&spi->dev);
602 return spi;
603}
604EXPORT_SYMBOL_GPL(spi_alloc_device);
605
606static void spi_dev_set_name(struct spi_device *spi)
607{
608 struct device *dev = &spi->dev;
609 struct fwnode_handle *fwnode = dev_fwnode(dev);
610
611 if (is_acpi_device_node(fwnode)) {
612 dev_set_name(dev, "spi-%s", acpi_dev_name(to_acpi_device_node(fwnode)));
613 return;
614 }
615
616 if (is_software_node(fwnode)) {
617 dev_set_name(dev, "spi-%pfwP", fwnode);
618 return;
619 }
620
621 dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->controller->dev),
622 spi_get_chipselect(spi, 0));
623}
624
625/*
626 * Zero(0) is a valid physical CS value and can be located at any
627 * logical CS in the spi->chip_select[]. If all the physical CS
628 * are initialized to 0 then It would be difficult to differentiate
629 * between a valid physical CS 0 & an unused logical CS whose physical
630 * CS can be 0. As a solution to this issue initialize all the CS to -1.
631 * Now all the unused logical CS will have -1 physical CS value & can be
632 * ignored while performing physical CS validity checks.
633 */
634#define SPI_INVALID_CS ((s8)-1)
635
636static inline bool is_valid_cs(s8 chip_select)
637{
638 return chip_select != SPI_INVALID_CS;
639}
640
641static inline int spi_dev_check_cs(struct device *dev,
642 struct spi_device *spi, u8 idx,
643 struct spi_device *new_spi, u8 new_idx)
644{
645 u8 cs, cs_new;
646 u8 idx_new;
647
648 cs = spi_get_chipselect(spi, idx);
649 for (idx_new = new_idx; idx_new < SPI_CS_CNT_MAX; idx_new++) {
650 cs_new = spi_get_chipselect(new_spi, idx_new);
651 if (is_valid_cs(cs) && is_valid_cs(cs_new) && cs == cs_new) {
652 dev_err(dev, "chipselect %u already in use\n", cs_new);
653 return -EBUSY;
654 }
655 }
656 return 0;
657}
658
659static int spi_dev_check(struct device *dev, void *data)
660{
661 struct spi_device *spi = to_spi_device(dev);
662 struct spi_device *new_spi = data;
663 int status, idx;
664
665 if (spi->controller == new_spi->controller) {
666 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
667 status = spi_dev_check_cs(dev, spi, idx, new_spi, 0);
668 if (status)
669 return status;
670 }
671 }
672 return 0;
673}
674
675static void spi_cleanup(struct spi_device *spi)
676{
677 if (spi->controller->cleanup)
678 spi->controller->cleanup(spi);
679}
680
681static int __spi_add_device(struct spi_device *spi)
682{
683 struct spi_controller *ctlr = spi->controller;
684 struct device *dev = ctlr->dev.parent;
685 int status, idx;
686 u8 cs;
687
688 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
689 /* Chipselects are numbered 0..max; validate. */
690 cs = spi_get_chipselect(spi, idx);
691 if (is_valid_cs(cs) && cs >= ctlr->num_chipselect) {
692 dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx),
693 ctlr->num_chipselect);
694 return -EINVAL;
695 }
696 }
697
698 /*
699 * Make sure that multiple logical CS doesn't map to the same physical CS.
700 * For example, spi->chip_select[0] != spi->chip_select[1] and so on.
701 */
702 if (!spi_controller_is_target(ctlr)) {
703 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
704 status = spi_dev_check_cs(dev, spi, idx, spi, idx + 1);
705 if (status)
706 return status;
707 }
708 }
709
710 /* Set the bus ID string */
711 spi_dev_set_name(spi);
712
713 /*
714 * We need to make sure there's no other device with this
715 * chipselect **BEFORE** we call setup(), else we'll trash
716 * its configuration.
717 */
718 status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
719 if (status)
720 return status;
721
722 /* Controller may unregister concurrently */
723 if (IS_ENABLED(CONFIG_SPI_DYNAMIC) &&
724 !device_is_registered(&ctlr->dev)) {
725 return -ENODEV;
726 }
727
728 if (ctlr->cs_gpiods) {
729 u8 cs;
730
731 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
732 cs = spi_get_chipselect(spi, idx);
733 if (is_valid_cs(cs))
734 spi_set_csgpiod(spi, idx, ctlr->cs_gpiods[cs]);
735 }
736 }
737
738 /*
739 * Drivers may modify this initial i/o setup, but will
740 * normally rely on the device being setup. Devices
741 * using SPI_CS_HIGH can't coexist well otherwise...
742 */
743 status = spi_setup(spi);
744 if (status < 0) {
745 dev_err(dev, "can't setup %s, status %d\n",
746 dev_name(&spi->dev), status);
747 return status;
748 }
749
750 /* Device may be bound to an active driver when this returns */
751 status = device_add(&spi->dev);
752 if (status < 0) {
753 dev_err(dev, "can't add %s, status %d\n",
754 dev_name(&spi->dev), status);
755 spi_cleanup(spi);
756 } else {
757 dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
758 }
759
760 return status;
761}
762
763/**
764 * spi_add_device - Add spi_device allocated with spi_alloc_device
765 * @spi: spi_device to register
766 *
767 * Companion function to spi_alloc_device. Devices allocated with
768 * spi_alloc_device can be added onto the SPI bus with this function.
769 *
770 * Return: 0 on success; negative errno on failure
771 */
772int spi_add_device(struct spi_device *spi)
773{
774 struct spi_controller *ctlr = spi->controller;
775 int status;
776
777 /* Set the bus ID string */
778 spi_dev_set_name(spi);
779
780 mutex_lock(&ctlr->add_lock);
781 status = __spi_add_device(spi);
782 mutex_unlock(&ctlr->add_lock);
783 return status;
784}
785EXPORT_SYMBOL_GPL(spi_add_device);
786
787static void spi_set_all_cs_unused(struct spi_device *spi)
788{
789 u8 idx;
790
791 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
792 spi_set_chipselect(spi, idx, SPI_INVALID_CS);
793}
794
795/**
796 * spi_new_device - instantiate one new SPI device
797 * @ctlr: Controller to which device is connected
798 * @chip: Describes the SPI device
799 * Context: can sleep
800 *
801 * On typical mainboards, this is purely internal; and it's not needed
802 * after board init creates the hard-wired devices. Some development
803 * platforms may not be able to use spi_register_board_info though, and
804 * this is exported so that for example a USB or parport based adapter
805 * driver could add devices (which it would learn about out-of-band).
806 *
807 * Return: the new device, or NULL.
808 */
809struct spi_device *spi_new_device(struct spi_controller *ctlr,
810 struct spi_board_info *chip)
811{
812 struct spi_device *proxy;
813 int status;
814
815 /*
816 * NOTE: caller did any chip->bus_num checks necessary.
817 *
818 * Also, unless we change the return value convention to use
819 * error-or-pointer (not NULL-or-pointer), troubleshootability
820 * suggests syslogged diagnostics are best here (ugh).
821 */
822
823 proxy = spi_alloc_device(ctlr);
824 if (!proxy)
825 return NULL;
826
827 WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
828
829 /* Use provided chip-select for proxy device */
830 spi_set_all_cs_unused(proxy);
831 spi_set_chipselect(proxy, 0, chip->chip_select);
832
833 proxy->max_speed_hz = chip->max_speed_hz;
834 proxy->mode = chip->mode;
835 proxy->irq = chip->irq;
836 strscpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
837 proxy->dev.platform_data = (void *) chip->platform_data;
838 proxy->controller_data = chip->controller_data;
839 proxy->controller_state = NULL;
840 /*
841 * By default spi->chip_select[0] will hold the physical CS number,
842 * so set bit 0 in spi->cs_index_mask.
843 */
844 proxy->cs_index_mask = BIT(0);
845
846 if (chip->swnode) {
847 status = device_add_software_node(&proxy->dev, chip->swnode);
848 if (status) {
849 dev_err(&ctlr->dev, "failed to add software node to '%s': %d\n",
850 chip->modalias, status);
851 goto err_dev_put;
852 }
853 }
854
855 status = spi_add_device(proxy);
856 if (status < 0)
857 goto err_dev_put;
858
859 return proxy;
860
861err_dev_put:
862 device_remove_software_node(&proxy->dev);
863 spi_dev_put(proxy);
864 return NULL;
865}
866EXPORT_SYMBOL_GPL(spi_new_device);
867
868/**
869 * spi_unregister_device - unregister a single SPI device
870 * @spi: spi_device to unregister
871 *
872 * Start making the passed SPI device vanish. Normally this would be handled
873 * by spi_unregister_controller().
874 */
875void spi_unregister_device(struct spi_device *spi)
876{
877 if (!spi)
878 return;
879
880 if (spi->dev.of_node) {
881 of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
882 of_node_put(spi->dev.of_node);
883 }
884 if (ACPI_COMPANION(&spi->dev))
885 acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
886 device_remove_software_node(&spi->dev);
887 device_del(&spi->dev);
888 spi_cleanup(spi);
889 put_device(&spi->dev);
890}
891EXPORT_SYMBOL_GPL(spi_unregister_device);
892
893static void spi_match_controller_to_boardinfo(struct spi_controller *ctlr,
894 struct spi_board_info *bi)
895{
896 struct spi_device *dev;
897
898 if (ctlr->bus_num != bi->bus_num)
899 return;
900
901 dev = spi_new_device(ctlr, bi);
902 if (!dev)
903 dev_err(ctlr->dev.parent, "can't create new device for %s\n",
904 bi->modalias);
905}
906
907/**
908 * spi_register_board_info - register SPI devices for a given board
909 * @info: array of chip descriptors
910 * @n: how many descriptors are provided
911 * Context: can sleep
912 *
913 * Board-specific early init code calls this (probably during arch_initcall)
914 * with segments of the SPI device table. Any device nodes are created later,
915 * after the relevant parent SPI controller (bus_num) is defined. We keep
916 * this table of devices forever, so that reloading a controller driver will
917 * not make Linux forget about these hard-wired devices.
918 *
919 * Other code can also call this, e.g. a particular add-on board might provide
920 * SPI devices through its expansion connector, so code initializing that board
921 * would naturally declare its SPI devices.
922 *
923 * The board info passed can safely be __initdata ... but be careful of
924 * any embedded pointers (platform_data, etc), they're copied as-is.
925 *
926 * Return: zero on success, else a negative error code.
927 */
928int spi_register_board_info(struct spi_board_info const *info, unsigned n)
929{
930 struct boardinfo *bi;
931 int i;
932
933 if (!n)
934 return 0;
935
936 bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
937 if (!bi)
938 return -ENOMEM;
939
940 for (i = 0; i < n; i++, bi++, info++) {
941 struct spi_controller *ctlr;
942
943 memcpy(&bi->board_info, info, sizeof(*info));
944
945 mutex_lock(&board_lock);
946 list_add_tail(&bi->list, &board_list);
947 list_for_each_entry(ctlr, &spi_controller_list, list)
948 spi_match_controller_to_boardinfo(ctlr,
949 &bi->board_info);
950 mutex_unlock(&board_lock);
951 }
952
953 return 0;
954}
955
956/*-------------------------------------------------------------------------*/
957
958/* Core methods for SPI resource management */
959
960/**
961 * spi_res_alloc - allocate a spi resource that is life-cycle managed
962 * during the processing of a spi_message while using
963 * spi_transfer_one
964 * @spi: the SPI device for which we allocate memory
965 * @release: the release code to execute for this resource
966 * @size: size to alloc and return
967 * @gfp: GFP allocation flags
968 *
969 * Return: the pointer to the allocated data
970 *
971 * This may get enhanced in the future to allocate from a memory pool
972 * of the @spi_device or @spi_controller to avoid repeated allocations.
973 */
974static void *spi_res_alloc(struct spi_device *spi, spi_res_release_t release,
975 size_t size, gfp_t gfp)
976{
977 struct spi_res *sres;
978
979 sres = kzalloc(sizeof(*sres) + size, gfp);
980 if (!sres)
981 return NULL;
982
983 INIT_LIST_HEAD(&sres->entry);
984 sres->release = release;
985
986 return sres->data;
987}
988
989/**
990 * spi_res_free - free an SPI resource
991 * @res: pointer to the custom data of a resource
992 */
993static void spi_res_free(void *res)
994{
995 struct spi_res *sres = container_of(res, struct spi_res, data);
996
997 WARN_ON(!list_empty(&sres->entry));
998 kfree(sres);
999}
1000
1001/**
1002 * spi_res_add - add a spi_res to the spi_message
1003 * @message: the SPI message
1004 * @res: the spi_resource
1005 */
1006static void spi_res_add(struct spi_message *message, void *res)
1007{
1008 struct spi_res *sres = container_of(res, struct spi_res, data);
1009
1010 WARN_ON(!list_empty(&sres->entry));
1011 list_add_tail(&sres->entry, &message->resources);
1012}
1013
1014/**
1015 * spi_res_release - release all SPI resources for this message
1016 * @ctlr: the @spi_controller
1017 * @message: the @spi_message
1018 */
1019static void spi_res_release(struct spi_controller *ctlr, struct spi_message *message)
1020{
1021 struct spi_res *res, *tmp;
1022
1023 list_for_each_entry_safe_reverse(res, tmp, &message->resources, entry) {
1024 if (res->release)
1025 res->release(ctlr, message, res->data);
1026
1027 list_del(&res->entry);
1028
1029 kfree(res);
1030 }
1031}
1032
1033/*-------------------------------------------------------------------------*/
1034#define spi_for_each_valid_cs(spi, idx) \
1035 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) \
1036 if (!(spi->cs_index_mask & BIT(idx))) {} else
1037
1038static inline bool spi_is_last_cs(struct spi_device *spi)
1039{
1040 u8 idx;
1041 bool last = false;
1042
1043 spi_for_each_valid_cs(spi, idx) {
1044 if (spi->controller->last_cs[idx] == spi_get_chipselect(spi, idx))
1045 last = true;
1046 }
1047 return last;
1048}
1049
1050static void spi_toggle_csgpiod(struct spi_device *spi, u8 idx, bool enable, bool activate)
1051{
1052 /*
1053 * Historically ACPI has no means of the GPIO polarity and
1054 * thus the SPISerialBus() resource defines it on the per-chip
1055 * basis. In order to avoid a chain of negations, the GPIO
1056 * polarity is considered being Active High. Even for the cases
1057 * when _DSD() is involved (in the updated versions of ACPI)
1058 * the GPIO CS polarity must be defined Active High to avoid
1059 * ambiguity. That's why we use enable, that takes SPI_CS_HIGH
1060 * into account.
1061 */
1062 if (has_acpi_companion(&spi->dev))
1063 gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), !enable);
1064 else
1065 /* Polarity handled by GPIO library */
1066 gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), activate);
1067
1068 if (activate)
1069 spi_delay_exec(&spi->cs_setup, NULL);
1070 else
1071 spi_delay_exec(&spi->cs_inactive, NULL);
1072}
1073
1074static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
1075{
1076 bool activate = enable;
1077 u8 idx;
1078
1079 /*
1080 * Avoid calling into the driver (or doing delays) if the chip select
1081 * isn't actually changing from the last time this was called.
1082 */
1083 if (!force && ((enable && spi->controller->last_cs_index_mask == spi->cs_index_mask &&
1084 spi_is_last_cs(spi)) ||
1085 (!enable && spi->controller->last_cs_index_mask == spi->cs_index_mask &&
1086 !spi_is_last_cs(spi))) &&
1087 (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH)))
1088 return;
1089
1090 trace_spi_set_cs(spi, activate);
1091
1092 spi->controller->last_cs_index_mask = spi->cs_index_mask;
1093 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
1094 spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : SPI_INVALID_CS;
1095 spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
1096
1097 if (spi->mode & SPI_CS_HIGH)
1098 enable = !enable;
1099
1100 /*
1101 * Handle chip select delays for GPIO based CS or controllers without
1102 * programmable chip select timing.
1103 */
1104 if ((spi_is_csgpiod(spi) || !spi->controller->set_cs_timing) && !activate)
1105 spi_delay_exec(&spi->cs_hold, NULL);
1106
1107 if (spi_is_csgpiod(spi)) {
1108 if (!(spi->mode & SPI_NO_CS)) {
1109 spi_for_each_valid_cs(spi, idx) {
1110 if (spi_get_csgpiod(spi, idx))
1111 spi_toggle_csgpiod(spi, idx, enable, activate);
1112 }
1113 }
1114 /* Some SPI masters need both GPIO CS & slave_select */
1115 if ((spi->controller->flags & SPI_CONTROLLER_GPIO_SS) &&
1116 spi->controller->set_cs)
1117 spi->controller->set_cs(spi, !enable);
1118 } else if (spi->controller->set_cs) {
1119 spi->controller->set_cs(spi, !enable);
1120 }
1121
1122 if (spi_is_csgpiod(spi) || !spi->controller->set_cs_timing) {
1123 if (activate)
1124 spi_delay_exec(&spi->cs_setup, NULL);
1125 else
1126 spi_delay_exec(&spi->cs_inactive, NULL);
1127 }
1128}
1129
1130#ifdef CONFIG_HAS_DMA
1131static int spi_map_buf_attrs(struct spi_controller *ctlr, struct device *dev,
1132 struct sg_table *sgt, void *buf, size_t len,
1133 enum dma_data_direction dir, unsigned long attrs)
1134{
1135 const bool vmalloced_buf = is_vmalloc_addr(buf);
1136 unsigned int max_seg_size = dma_get_max_seg_size(dev);
1137#ifdef CONFIG_HIGHMEM
1138 const bool kmap_buf = ((unsigned long)buf >= PKMAP_BASE &&
1139 (unsigned long)buf < (PKMAP_BASE +
1140 (LAST_PKMAP * PAGE_SIZE)));
1141#else
1142 const bool kmap_buf = false;
1143#endif
1144 int desc_len;
1145 int sgs;
1146 struct page *vm_page;
1147 struct scatterlist *sg;
1148 void *sg_buf;
1149 size_t min;
1150 int i, ret;
1151
1152 if (vmalloced_buf || kmap_buf) {
1153 desc_len = min_t(unsigned long, max_seg_size, PAGE_SIZE);
1154 sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
1155 } else if (virt_addr_valid(buf)) {
1156 desc_len = min_t(size_t, max_seg_size, ctlr->max_dma_len);
1157 sgs = DIV_ROUND_UP(len, desc_len);
1158 } else {
1159 return -EINVAL;
1160 }
1161
1162 ret = sg_alloc_table(sgt, sgs, GFP_KERNEL);
1163 if (ret != 0)
1164 return ret;
1165
1166 sg = &sgt->sgl[0];
1167 for (i = 0; i < sgs; i++) {
1168
1169 if (vmalloced_buf || kmap_buf) {
1170 /*
1171 * Next scatterlist entry size is the minimum between
1172 * the desc_len and the remaining buffer length that
1173 * fits in a page.
1174 */
1175 min = min_t(size_t, desc_len,
1176 min_t(size_t, len,
1177 PAGE_SIZE - offset_in_page(buf)));
1178 if (vmalloced_buf)
1179 vm_page = vmalloc_to_page(buf);
1180 else
1181 vm_page = kmap_to_page(buf);
1182 if (!vm_page) {
1183 sg_free_table(sgt);
1184 return -ENOMEM;
1185 }
1186 sg_set_page(sg, vm_page,
1187 min, offset_in_page(buf));
1188 } else {
1189 min = min_t(size_t, len, desc_len);
1190 sg_buf = buf;
1191 sg_set_buf(sg, sg_buf, min);
1192 }
1193
1194 buf += min;
1195 len -= min;
1196 sg = sg_next(sg);
1197 }
1198
1199 ret = dma_map_sgtable(dev, sgt, dir, attrs);
1200 if (ret < 0) {
1201 sg_free_table(sgt);
1202 return ret;
1203 }
1204
1205 return 0;
1206}
1207
1208int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
1209 struct sg_table *sgt, void *buf, size_t len,
1210 enum dma_data_direction dir)
1211{
1212 return spi_map_buf_attrs(ctlr, dev, sgt, buf, len, dir, 0);
1213}
1214
1215static void spi_unmap_buf_attrs(struct spi_controller *ctlr,
1216 struct device *dev, struct sg_table *sgt,
1217 enum dma_data_direction dir,
1218 unsigned long attrs)
1219{
1220 dma_unmap_sgtable(dev, sgt, dir, attrs);
1221 sg_free_table(sgt);
1222 sgt->orig_nents = 0;
1223 sgt->nents = 0;
1224}
1225
1226void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
1227 struct sg_table *sgt, enum dma_data_direction dir)
1228{
1229 spi_unmap_buf_attrs(ctlr, dev, sgt, dir, 0);
1230}
1231
1232static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
1233{
1234 struct device *tx_dev, *rx_dev;
1235 struct spi_transfer *xfer;
1236 int ret;
1237
1238 if (!ctlr->can_dma)
1239 return 0;
1240
1241 if (ctlr->dma_tx)
1242 tx_dev = ctlr->dma_tx->device->dev;
1243 else if (ctlr->dma_map_dev)
1244 tx_dev = ctlr->dma_map_dev;
1245 else
1246 tx_dev = ctlr->dev.parent;
1247
1248 if (ctlr->dma_rx)
1249 rx_dev = ctlr->dma_rx->device->dev;
1250 else if (ctlr->dma_map_dev)
1251 rx_dev = ctlr->dma_map_dev;
1252 else
1253 rx_dev = ctlr->dev.parent;
1254
1255 ret = -ENOMSG;
1256 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1257 /* The sync is done before each transfer. */
1258 unsigned long attrs = DMA_ATTR_SKIP_CPU_SYNC;
1259
1260 if (!ctlr->can_dma(ctlr, msg->spi, xfer))
1261 continue;
1262
1263 if (xfer->tx_buf != NULL) {
1264 ret = spi_map_buf_attrs(ctlr, tx_dev, &xfer->tx_sg,
1265 (void *)xfer->tx_buf,
1266 xfer->len, DMA_TO_DEVICE,
1267 attrs);
1268 if (ret != 0)
1269 return ret;
1270
1271 xfer->tx_sg_mapped = true;
1272 }
1273
1274 if (xfer->rx_buf != NULL) {
1275 ret = spi_map_buf_attrs(ctlr, rx_dev, &xfer->rx_sg,
1276 xfer->rx_buf, xfer->len,
1277 DMA_FROM_DEVICE, attrs);
1278 if (ret != 0) {
1279 spi_unmap_buf_attrs(ctlr, tx_dev,
1280 &xfer->tx_sg, DMA_TO_DEVICE,
1281 attrs);
1282
1283 return ret;
1284 }
1285
1286 xfer->rx_sg_mapped = true;
1287 }
1288 }
1289 /* No transfer has been mapped, bail out with success */
1290 if (ret)
1291 return 0;
1292
1293 ctlr->cur_rx_dma_dev = rx_dev;
1294 ctlr->cur_tx_dma_dev = tx_dev;
1295
1296 return 0;
1297}
1298
1299static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
1300{
1301 struct device *rx_dev = ctlr->cur_rx_dma_dev;
1302 struct device *tx_dev = ctlr->cur_tx_dma_dev;
1303 struct spi_transfer *xfer;
1304
1305 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1306 /* The sync has already been done after each transfer. */
1307 unsigned long attrs = DMA_ATTR_SKIP_CPU_SYNC;
1308
1309 if (xfer->rx_sg_mapped)
1310 spi_unmap_buf_attrs(ctlr, rx_dev, &xfer->rx_sg,
1311 DMA_FROM_DEVICE, attrs);
1312 xfer->rx_sg_mapped = false;
1313
1314 if (xfer->tx_sg_mapped)
1315 spi_unmap_buf_attrs(ctlr, tx_dev, &xfer->tx_sg,
1316 DMA_TO_DEVICE, attrs);
1317 xfer->tx_sg_mapped = false;
1318 }
1319
1320 return 0;
1321}
1322
1323static void spi_dma_sync_for_device(struct spi_controller *ctlr,
1324 struct spi_transfer *xfer)
1325{
1326 struct device *rx_dev = ctlr->cur_rx_dma_dev;
1327 struct device *tx_dev = ctlr->cur_tx_dma_dev;
1328
1329 if (xfer->tx_sg_mapped)
1330 dma_sync_sgtable_for_device(tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
1331 if (xfer->rx_sg_mapped)
1332 dma_sync_sgtable_for_device(rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
1333}
1334
1335static void spi_dma_sync_for_cpu(struct spi_controller *ctlr,
1336 struct spi_transfer *xfer)
1337{
1338 struct device *rx_dev = ctlr->cur_rx_dma_dev;
1339 struct device *tx_dev = ctlr->cur_tx_dma_dev;
1340
1341 if (xfer->rx_sg_mapped)
1342 dma_sync_sgtable_for_cpu(rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
1343 if (xfer->tx_sg_mapped)
1344 dma_sync_sgtable_for_cpu(tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
1345}
1346#else /* !CONFIG_HAS_DMA */
1347static inline int __spi_map_msg(struct spi_controller *ctlr,
1348 struct spi_message *msg)
1349{
1350 return 0;
1351}
1352
1353static inline int __spi_unmap_msg(struct spi_controller *ctlr,
1354 struct spi_message *msg)
1355{
1356 return 0;
1357}
1358
1359static void spi_dma_sync_for_device(struct spi_controller *ctrl,
1360 struct spi_transfer *xfer)
1361{
1362}
1363
1364static void spi_dma_sync_for_cpu(struct spi_controller *ctrl,
1365 struct spi_transfer *xfer)
1366{
1367}
1368#endif /* !CONFIG_HAS_DMA */
1369
1370static inline int spi_unmap_msg(struct spi_controller *ctlr,
1371 struct spi_message *msg)
1372{
1373 struct spi_transfer *xfer;
1374
1375 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1376 /*
1377 * Restore the original value of tx_buf or rx_buf if they are
1378 * NULL.
1379 */
1380 if (xfer->tx_buf == ctlr->dummy_tx)
1381 xfer->tx_buf = NULL;
1382 if (xfer->rx_buf == ctlr->dummy_rx)
1383 xfer->rx_buf = NULL;
1384 }
1385
1386 return __spi_unmap_msg(ctlr, msg);
1387}
1388
1389static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
1390{
1391 struct spi_transfer *xfer;
1392 void *tmp;
1393 unsigned int max_tx, max_rx;
1394
1395 if ((ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX))
1396 && !(msg->spi->mode & SPI_3WIRE)) {
1397 max_tx = 0;
1398 max_rx = 0;
1399
1400 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1401 if ((ctlr->flags & SPI_CONTROLLER_MUST_TX) &&
1402 !xfer->tx_buf)
1403 max_tx = max(xfer->len, max_tx);
1404 if ((ctlr->flags & SPI_CONTROLLER_MUST_RX) &&
1405 !xfer->rx_buf)
1406 max_rx = max(xfer->len, max_rx);
1407 }
1408
1409 if (max_tx) {
1410 tmp = krealloc(ctlr->dummy_tx, max_tx,
1411 GFP_KERNEL | GFP_DMA | __GFP_ZERO);
1412 if (!tmp)
1413 return -ENOMEM;
1414 ctlr->dummy_tx = tmp;
1415 }
1416
1417 if (max_rx) {
1418 tmp = krealloc(ctlr->dummy_rx, max_rx,
1419 GFP_KERNEL | GFP_DMA);
1420 if (!tmp)
1421 return -ENOMEM;
1422 ctlr->dummy_rx = tmp;
1423 }
1424
1425 if (max_tx || max_rx) {
1426 list_for_each_entry(xfer, &msg->transfers,
1427 transfer_list) {
1428 if (!xfer->len)
1429 continue;
1430 if (!xfer->tx_buf)
1431 xfer->tx_buf = ctlr->dummy_tx;
1432 if (!xfer->rx_buf)
1433 xfer->rx_buf = ctlr->dummy_rx;
1434 }
1435 }
1436 }
1437
1438 return __spi_map_msg(ctlr, msg);
1439}
1440
1441static int spi_transfer_wait(struct spi_controller *ctlr,
1442 struct spi_message *msg,
1443 struct spi_transfer *xfer)
1444{
1445 struct spi_statistics __percpu *statm = ctlr->pcpu_statistics;
1446 struct spi_statistics __percpu *stats = msg->spi->pcpu_statistics;
1447 u32 speed_hz = xfer->speed_hz;
1448 unsigned long long ms;
1449
1450 if (spi_controller_is_target(ctlr)) {
1451 if (wait_for_completion_interruptible(&ctlr->xfer_completion)) {
1452 dev_dbg(&msg->spi->dev, "SPI transfer interrupted\n");
1453 return -EINTR;
1454 }
1455 } else {
1456 if (!speed_hz)
1457 speed_hz = 100000;
1458
1459 /*
1460 * For each byte we wait for 8 cycles of the SPI clock.
1461 * Since speed is defined in Hz and we want milliseconds,
1462 * use respective multiplier, but before the division,
1463 * otherwise we may get 0 for short transfers.
1464 */
1465 ms = 8LL * MSEC_PER_SEC * xfer->len;
1466 do_div(ms, speed_hz);
1467
1468 /*
1469 * Increase it twice and add 200 ms tolerance, use
1470 * predefined maximum in case of overflow.
1471 */
1472 ms += ms + 200;
1473 if (ms > UINT_MAX)
1474 ms = UINT_MAX;
1475
1476 ms = wait_for_completion_timeout(&ctlr->xfer_completion,
1477 msecs_to_jiffies(ms));
1478
1479 if (ms == 0) {
1480 SPI_STATISTICS_INCREMENT_FIELD(statm, timedout);
1481 SPI_STATISTICS_INCREMENT_FIELD(stats, timedout);
1482 dev_err(&msg->spi->dev,
1483 "SPI transfer timed out\n");
1484 return -ETIMEDOUT;
1485 }
1486
1487 if (xfer->error & SPI_TRANS_FAIL_IO)
1488 return -EIO;
1489 }
1490
1491 return 0;
1492}
1493
1494static void _spi_transfer_delay_ns(u32 ns)
1495{
1496 if (!ns)
1497 return;
1498 if (ns <= NSEC_PER_USEC) {
1499 ndelay(ns);
1500 } else {
1501 u32 us = DIV_ROUND_UP(ns, NSEC_PER_USEC);
1502
1503 if (us <= 10)
1504 udelay(us);
1505 else
1506 usleep_range(us, us + DIV_ROUND_UP(us, 10));
1507 }
1508}
1509
1510int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer)
1511{
1512 u32 delay = _delay->value;
1513 u32 unit = _delay->unit;
1514 u32 hz;
1515
1516 if (!delay)
1517 return 0;
1518
1519 switch (unit) {
1520 case SPI_DELAY_UNIT_USECS:
1521 delay *= NSEC_PER_USEC;
1522 break;
1523 case SPI_DELAY_UNIT_NSECS:
1524 /* Nothing to do here */
1525 break;
1526 case SPI_DELAY_UNIT_SCK:
1527 /* Clock cycles need to be obtained from spi_transfer */
1528 if (!xfer)
1529 return -EINVAL;
1530 /*
1531 * If there is unknown effective speed, approximate it
1532 * by underestimating with half of the requested Hz.
1533 */
1534 hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2;
1535 if (!hz)
1536 return -EINVAL;
1537
1538 /* Convert delay to nanoseconds */
1539 delay *= DIV_ROUND_UP(NSEC_PER_SEC, hz);
1540 break;
1541 default:
1542 return -EINVAL;
1543 }
1544
1545 return delay;
1546}
1547EXPORT_SYMBOL_GPL(spi_delay_to_ns);
1548
1549int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer)
1550{
1551 int delay;
1552
1553 might_sleep();
1554
1555 if (!_delay)
1556 return -EINVAL;
1557
1558 delay = spi_delay_to_ns(_delay, xfer);
1559 if (delay < 0)
1560 return delay;
1561
1562 _spi_transfer_delay_ns(delay);
1563
1564 return 0;
1565}
1566EXPORT_SYMBOL_GPL(spi_delay_exec);
1567
1568static void _spi_transfer_cs_change_delay(struct spi_message *msg,
1569 struct spi_transfer *xfer)
1570{
1571 u32 default_delay_ns = 10 * NSEC_PER_USEC;
1572 u32 delay = xfer->cs_change_delay.value;
1573 u32 unit = xfer->cs_change_delay.unit;
1574 int ret;
1575
1576 /* Return early on "fast" mode - for everything but USECS */
1577 if (!delay) {
1578 if (unit == SPI_DELAY_UNIT_USECS)
1579 _spi_transfer_delay_ns(default_delay_ns);
1580 return;
1581 }
1582
1583 ret = spi_delay_exec(&xfer->cs_change_delay, xfer);
1584 if (ret) {
1585 dev_err_once(&msg->spi->dev,
1586 "Use of unsupported delay unit %i, using default of %luus\n",
1587 unit, default_delay_ns / NSEC_PER_USEC);
1588 _spi_transfer_delay_ns(default_delay_ns);
1589 }
1590}
1591
1592void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
1593 struct spi_transfer *xfer)
1594{
1595 _spi_transfer_cs_change_delay(msg, xfer);
1596}
1597EXPORT_SYMBOL_GPL(spi_transfer_cs_change_delay_exec);
1598
1599/*
1600 * spi_transfer_one_message - Default implementation of transfer_one_message()
1601 *
1602 * This is a standard implementation of transfer_one_message() for
1603 * drivers which implement a transfer_one() operation. It provides
1604 * standard handling of delays and chip select management.
1605 */
1606static int spi_transfer_one_message(struct spi_controller *ctlr,
1607 struct spi_message *msg)
1608{
1609 struct spi_transfer *xfer;
1610 bool keep_cs = false;
1611 int ret = 0;
1612 struct spi_statistics __percpu *statm = ctlr->pcpu_statistics;
1613 struct spi_statistics __percpu *stats = msg->spi->pcpu_statistics;
1614
1615 xfer = list_first_entry(&msg->transfers, struct spi_transfer, transfer_list);
1616 spi_set_cs(msg->spi, !xfer->cs_off, false);
1617
1618 SPI_STATISTICS_INCREMENT_FIELD(statm, messages);
1619 SPI_STATISTICS_INCREMENT_FIELD(stats, messages);
1620
1621 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1622 trace_spi_transfer_start(msg, xfer);
1623
1624 spi_statistics_add_transfer_stats(statm, xfer, msg);
1625 spi_statistics_add_transfer_stats(stats, xfer, msg);
1626
1627 if (!ctlr->ptp_sts_supported) {
1628 xfer->ptp_sts_word_pre = 0;
1629 ptp_read_system_prets(xfer->ptp_sts);
1630 }
1631
1632 if ((xfer->tx_buf || xfer->rx_buf) && xfer->len) {
1633 reinit_completion(&ctlr->xfer_completion);
1634
1635fallback_pio:
1636 spi_dma_sync_for_device(ctlr, xfer);
1637 ret = ctlr->transfer_one(ctlr, msg->spi, xfer);
1638 if (ret < 0) {
1639 spi_dma_sync_for_cpu(ctlr, xfer);
1640
1641 if ((xfer->tx_sg_mapped || xfer->rx_sg_mapped) &&
1642 (xfer->error & SPI_TRANS_FAIL_NO_START)) {
1643 __spi_unmap_msg(ctlr, msg);
1644 ctlr->fallback = true;
1645 xfer->error &= ~SPI_TRANS_FAIL_NO_START;
1646 goto fallback_pio;
1647 }
1648
1649 SPI_STATISTICS_INCREMENT_FIELD(statm,
1650 errors);
1651 SPI_STATISTICS_INCREMENT_FIELD(stats,
1652 errors);
1653 dev_err(&msg->spi->dev,
1654 "SPI transfer failed: %d\n", ret);
1655 goto out;
1656 }
1657
1658 if (ret > 0) {
1659 ret = spi_transfer_wait(ctlr, msg, xfer);
1660 if (ret < 0)
1661 msg->status = ret;
1662 }
1663
1664 spi_dma_sync_for_cpu(ctlr, xfer);
1665 } else {
1666 if (xfer->len)
1667 dev_err(&msg->spi->dev,
1668 "Bufferless transfer has length %u\n",
1669 xfer->len);
1670 }
1671
1672 if (!ctlr->ptp_sts_supported) {
1673 ptp_read_system_postts(xfer->ptp_sts);
1674 xfer->ptp_sts_word_post = xfer->len;
1675 }
1676
1677 trace_spi_transfer_stop(msg, xfer);
1678
1679 if (msg->status != -EINPROGRESS)
1680 goto out;
1681
1682 spi_transfer_delay_exec(xfer);
1683
1684 if (xfer->cs_change) {
1685 if (list_is_last(&xfer->transfer_list,
1686 &msg->transfers)) {
1687 keep_cs = true;
1688 } else {
1689 if (!xfer->cs_off)
1690 spi_set_cs(msg->spi, false, false);
1691 _spi_transfer_cs_change_delay(msg, xfer);
1692 if (!list_next_entry(xfer, transfer_list)->cs_off)
1693 spi_set_cs(msg->spi, true, false);
1694 }
1695 } else if (!list_is_last(&xfer->transfer_list, &msg->transfers) &&
1696 xfer->cs_off != list_next_entry(xfer, transfer_list)->cs_off) {
1697 spi_set_cs(msg->spi, xfer->cs_off, false);
1698 }
1699
1700 msg->actual_length += xfer->len;
1701 }
1702
1703out:
1704 if (ret != 0 || !keep_cs)
1705 spi_set_cs(msg->spi, false, false);
1706
1707 if (msg->status == -EINPROGRESS)
1708 msg->status = ret;
1709
1710 if (msg->status && ctlr->handle_err)
1711 ctlr->handle_err(ctlr, msg);
1712
1713 spi_finalize_current_message(ctlr);
1714
1715 return ret;
1716}
1717
1718/**
1719 * spi_finalize_current_transfer - report completion of a transfer
1720 * @ctlr: the controller reporting completion
1721 *
1722 * Called by SPI drivers using the core transfer_one_message()
1723 * implementation to notify it that the current interrupt driven
1724 * transfer has finished and the next one may be scheduled.
1725 */
1726void spi_finalize_current_transfer(struct spi_controller *ctlr)
1727{
1728 complete(&ctlr->xfer_completion);
1729}
1730EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
1731
1732static void spi_idle_runtime_pm(struct spi_controller *ctlr)
1733{
1734 if (ctlr->auto_runtime_pm) {
1735 pm_runtime_mark_last_busy(ctlr->dev.parent);
1736 pm_runtime_put_autosuspend(ctlr->dev.parent);
1737 }
1738}
1739
1740static int __spi_pump_transfer_message(struct spi_controller *ctlr,
1741 struct spi_message *msg, bool was_busy)
1742{
1743 struct spi_transfer *xfer;
1744 int ret;
1745
1746 if (!was_busy && ctlr->auto_runtime_pm) {
1747 ret = pm_runtime_get_sync(ctlr->dev.parent);
1748 if (ret < 0) {
1749 pm_runtime_put_noidle(ctlr->dev.parent);
1750 dev_err(&ctlr->dev, "Failed to power device: %d\n",
1751 ret);
1752
1753 msg->status = ret;
1754 spi_finalize_current_message(ctlr);
1755
1756 return ret;
1757 }
1758 }
1759
1760 if (!was_busy)
1761 trace_spi_controller_busy(ctlr);
1762
1763 if (!was_busy && ctlr->prepare_transfer_hardware) {
1764 ret = ctlr->prepare_transfer_hardware(ctlr);
1765 if (ret) {
1766 dev_err(&ctlr->dev,
1767 "failed to prepare transfer hardware: %d\n",
1768 ret);
1769
1770 if (ctlr->auto_runtime_pm)
1771 pm_runtime_put(ctlr->dev.parent);
1772
1773 msg->status = ret;
1774 spi_finalize_current_message(ctlr);
1775
1776 return ret;
1777 }
1778 }
1779
1780 trace_spi_message_start(msg);
1781
1782 if (ctlr->prepare_message) {
1783 ret = ctlr->prepare_message(ctlr, msg);
1784 if (ret) {
1785 dev_err(&ctlr->dev, "failed to prepare message: %d\n",
1786 ret);
1787 msg->status = ret;
1788 spi_finalize_current_message(ctlr);
1789 return ret;
1790 }
1791 msg->prepared = true;
1792 }
1793
1794 ret = spi_map_msg(ctlr, msg);
1795 if (ret) {
1796 msg->status = ret;
1797 spi_finalize_current_message(ctlr);
1798 return ret;
1799 }
1800
1801 if (!ctlr->ptp_sts_supported && !ctlr->transfer_one) {
1802 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1803 xfer->ptp_sts_word_pre = 0;
1804 ptp_read_system_prets(xfer->ptp_sts);
1805 }
1806 }
1807
1808 /*
1809 * Drivers implementation of transfer_one_message() must arrange for
1810 * spi_finalize_current_message() to get called. Most drivers will do
1811 * this in the calling context, but some don't. For those cases, a
1812 * completion is used to guarantee that this function does not return
1813 * until spi_finalize_current_message() is done accessing
1814 * ctlr->cur_msg.
1815 * Use of the following two flags enable to opportunistically skip the
1816 * use of the completion since its use involves expensive spin locks.
1817 * In case of a race with the context that calls
1818 * spi_finalize_current_message() the completion will always be used,
1819 * due to strict ordering of these flags using barriers.
1820 */
1821 WRITE_ONCE(ctlr->cur_msg_incomplete, true);
1822 WRITE_ONCE(ctlr->cur_msg_need_completion, false);
1823 reinit_completion(&ctlr->cur_msg_completion);
1824 smp_wmb(); /* Make these available to spi_finalize_current_message() */
1825
1826 ret = ctlr->transfer_one_message(ctlr, msg);
1827 if (ret) {
1828 dev_err(&ctlr->dev,
1829 "failed to transfer one message from queue\n");
1830 return ret;
1831 }
1832
1833 WRITE_ONCE(ctlr->cur_msg_need_completion, true);
1834 smp_mb(); /* See spi_finalize_current_message()... */
1835 if (READ_ONCE(ctlr->cur_msg_incomplete))
1836 wait_for_completion(&ctlr->cur_msg_completion);
1837
1838 return 0;
1839}
1840
1841/**
1842 * __spi_pump_messages - function which processes SPI message queue
1843 * @ctlr: controller to process queue for
1844 * @in_kthread: true if we are in the context of the message pump thread
1845 *
1846 * This function checks if there is any SPI message in the queue that
1847 * needs processing and if so call out to the driver to initialize hardware
1848 * and transfer each message.
1849 *
1850 * Note that it is called both from the kthread itself and also from
1851 * inside spi_sync(); the queue extraction handling at the top of the
1852 * function should deal with this safely.
1853 */
1854static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
1855{
1856 struct spi_message *msg;
1857 bool was_busy = false;
1858 unsigned long flags;
1859 int ret;
1860
1861 /* Take the I/O mutex */
1862 mutex_lock(&ctlr->io_mutex);
1863
1864 /* Lock queue */
1865 spin_lock_irqsave(&ctlr->queue_lock, flags);
1866
1867 /* Make sure we are not already running a message */
1868 if (ctlr->cur_msg)
1869 goto out_unlock;
1870
1871 /* Check if the queue is idle */
1872 if (list_empty(&ctlr->queue) || !ctlr->running) {
1873 if (!ctlr->busy)
1874 goto out_unlock;
1875
1876 /* Defer any non-atomic teardown to the thread */
1877 if (!in_kthread) {
1878 if (!ctlr->dummy_rx && !ctlr->dummy_tx &&
1879 !ctlr->unprepare_transfer_hardware) {
1880 spi_idle_runtime_pm(ctlr);
1881 ctlr->busy = false;
1882 ctlr->queue_empty = true;
1883 trace_spi_controller_idle(ctlr);
1884 } else {
1885 kthread_queue_work(ctlr->kworker,
1886 &ctlr->pump_messages);
1887 }
1888 goto out_unlock;
1889 }
1890
1891 ctlr->busy = false;
1892 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1893
1894 kfree(ctlr->dummy_rx);
1895 ctlr->dummy_rx = NULL;
1896 kfree(ctlr->dummy_tx);
1897 ctlr->dummy_tx = NULL;
1898 if (ctlr->unprepare_transfer_hardware &&
1899 ctlr->unprepare_transfer_hardware(ctlr))
1900 dev_err(&ctlr->dev,
1901 "failed to unprepare transfer hardware\n");
1902 spi_idle_runtime_pm(ctlr);
1903 trace_spi_controller_idle(ctlr);
1904
1905 spin_lock_irqsave(&ctlr->queue_lock, flags);
1906 ctlr->queue_empty = true;
1907 goto out_unlock;
1908 }
1909
1910 /* Extract head of queue */
1911 msg = list_first_entry(&ctlr->queue, struct spi_message, queue);
1912 ctlr->cur_msg = msg;
1913
1914 list_del_init(&msg->queue);
1915 if (ctlr->busy)
1916 was_busy = true;
1917 else
1918 ctlr->busy = true;
1919 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1920
1921 ret = __spi_pump_transfer_message(ctlr, msg, was_busy);
1922 kthread_queue_work(ctlr->kworker, &ctlr->pump_messages);
1923
1924 ctlr->cur_msg = NULL;
1925 ctlr->fallback = false;
1926
1927 mutex_unlock(&ctlr->io_mutex);
1928
1929 /* Prod the scheduler in case transfer_one() was busy waiting */
1930 if (!ret)
1931 cond_resched();
1932 return;
1933
1934out_unlock:
1935 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1936 mutex_unlock(&ctlr->io_mutex);
1937}
1938
1939/**
1940 * spi_pump_messages - kthread work function which processes spi message queue
1941 * @work: pointer to kthread work struct contained in the controller struct
1942 */
1943static void spi_pump_messages(struct kthread_work *work)
1944{
1945 struct spi_controller *ctlr =
1946 container_of(work, struct spi_controller, pump_messages);
1947
1948 __spi_pump_messages(ctlr, true);
1949}
1950
1951/**
1952 * spi_take_timestamp_pre - helper to collect the beginning of the TX timestamp
1953 * @ctlr: Pointer to the spi_controller structure of the driver
1954 * @xfer: Pointer to the transfer being timestamped
1955 * @progress: How many words (not bytes) have been transferred so far
1956 * @irqs_off: If true, will disable IRQs and preemption for the duration of the
1957 * transfer, for less jitter in time measurement. Only compatible
1958 * with PIO drivers. If true, must follow up with
1959 * spi_take_timestamp_post or otherwise system will crash.
1960 * WARNING: for fully predictable results, the CPU frequency must
1961 * also be under control (governor).
1962 *
1963 * This is a helper for drivers to collect the beginning of the TX timestamp
1964 * for the requested byte from the SPI transfer. The frequency with which this
1965 * function must be called (once per word, once for the whole transfer, once
1966 * per batch of words etc) is arbitrary as long as the @tx buffer offset is
1967 * greater than or equal to the requested byte at the time of the call. The
1968 * timestamp is only taken once, at the first such call. It is assumed that
1969 * the driver advances its @tx buffer pointer monotonically.
1970 */
1971void spi_take_timestamp_pre(struct spi_controller *ctlr,
1972 struct spi_transfer *xfer,
1973 size_t progress, bool irqs_off)
1974{
1975 if (!xfer->ptp_sts)
1976 return;
1977
1978 if (xfer->timestamped)
1979 return;
1980
1981 if (progress > xfer->ptp_sts_word_pre)
1982 return;
1983
1984 /* Capture the resolution of the timestamp */
1985 xfer->ptp_sts_word_pre = progress;
1986
1987 if (irqs_off) {
1988 local_irq_save(ctlr->irq_flags);
1989 preempt_disable();
1990 }
1991
1992 ptp_read_system_prets(xfer->ptp_sts);
1993}
1994EXPORT_SYMBOL_GPL(spi_take_timestamp_pre);
1995
1996/**
1997 * spi_take_timestamp_post - helper to collect the end of the TX timestamp
1998 * @ctlr: Pointer to the spi_controller structure of the driver
1999 * @xfer: Pointer to the transfer being timestamped
2000 * @progress: How many words (not bytes) have been transferred so far
2001 * @irqs_off: If true, will re-enable IRQs and preemption for the local CPU.
2002 *
2003 * This is a helper for drivers to collect the end of the TX timestamp for
2004 * the requested byte from the SPI transfer. Can be called with an arbitrary
2005 * frequency: only the first call where @tx exceeds or is equal to the
2006 * requested word will be timestamped.
2007 */
2008void spi_take_timestamp_post(struct spi_controller *ctlr,
2009 struct spi_transfer *xfer,
2010 size_t progress, bool irqs_off)
2011{
2012 if (!xfer->ptp_sts)
2013 return;
2014
2015 if (xfer->timestamped)
2016 return;
2017
2018 if (progress < xfer->ptp_sts_word_post)
2019 return;
2020
2021 ptp_read_system_postts(xfer->ptp_sts);
2022
2023 if (irqs_off) {
2024 local_irq_restore(ctlr->irq_flags);
2025 preempt_enable();
2026 }
2027
2028 /* Capture the resolution of the timestamp */
2029 xfer->ptp_sts_word_post = progress;
2030
2031 xfer->timestamped = 1;
2032}
2033EXPORT_SYMBOL_GPL(spi_take_timestamp_post);
2034
2035/**
2036 * spi_set_thread_rt - set the controller to pump at realtime priority
2037 * @ctlr: controller to boost priority of
2038 *
2039 * This can be called because the controller requested realtime priority
2040 * (by setting the ->rt value before calling spi_register_controller()) or
2041 * because a device on the bus said that its transfers needed realtime
2042 * priority.
2043 *
2044 * NOTE: at the moment if any device on a bus says it needs realtime then
2045 * the thread will be at realtime priority for all transfers on that
2046 * controller. If this eventually becomes a problem we may see if we can
2047 * find a way to boost the priority only temporarily during relevant
2048 * transfers.
2049 */
2050static void spi_set_thread_rt(struct spi_controller *ctlr)
2051{
2052 dev_info(&ctlr->dev,
2053 "will run message pump with realtime priority\n");
2054 sched_set_fifo(ctlr->kworker->task);
2055}
2056
2057static int spi_init_queue(struct spi_controller *ctlr)
2058{
2059 ctlr->running = false;
2060 ctlr->busy = false;
2061 ctlr->queue_empty = true;
2062
2063 ctlr->kworker = kthread_create_worker(0, dev_name(&ctlr->dev));
2064 if (IS_ERR(ctlr->kworker)) {
2065 dev_err(&ctlr->dev, "failed to create message pump kworker\n");
2066 return PTR_ERR(ctlr->kworker);
2067 }
2068
2069 kthread_init_work(&ctlr->pump_messages, spi_pump_messages);
2070
2071 /*
2072 * Controller config will indicate if this controller should run the
2073 * message pump with high (realtime) priority to reduce the transfer
2074 * latency on the bus by minimising the delay between a transfer
2075 * request and the scheduling of the message pump thread. Without this
2076 * setting the message pump thread will remain at default priority.
2077 */
2078 if (ctlr->rt)
2079 spi_set_thread_rt(ctlr);
2080
2081 return 0;
2082}
2083
2084/**
2085 * spi_get_next_queued_message() - called by driver to check for queued
2086 * messages
2087 * @ctlr: the controller to check for queued messages
2088 *
2089 * If there are more messages in the queue, the next message is returned from
2090 * this call.
2091 *
2092 * Return: the next message in the queue, else NULL if the queue is empty.
2093 */
2094struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr)
2095{
2096 struct spi_message *next;
2097 unsigned long flags;
2098
2099 /* Get a pointer to the next message, if any */
2100 spin_lock_irqsave(&ctlr->queue_lock, flags);
2101 next = list_first_entry_or_null(&ctlr->queue, struct spi_message,
2102 queue);
2103 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
2104
2105 return next;
2106}
2107EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
2108
2109/*
2110 * __spi_unoptimize_message - shared implementation of spi_unoptimize_message()
2111 * and spi_maybe_unoptimize_message()
2112 * @msg: the message to unoptimize
2113 *
2114 * Peripheral drivers should use spi_unoptimize_message() and callers inside
2115 * core should use spi_maybe_unoptimize_message() rather than calling this
2116 * function directly.
2117 *
2118 * It is not valid to call this on a message that is not currently optimized.
2119 */
2120static void __spi_unoptimize_message(struct spi_message *msg)
2121{
2122 struct spi_controller *ctlr = msg->spi->controller;
2123
2124 if (ctlr->unoptimize_message)
2125 ctlr->unoptimize_message(msg);
2126
2127 spi_res_release(ctlr, msg);
2128
2129 msg->optimized = false;
2130 msg->opt_state = NULL;
2131}
2132
2133/*
2134 * spi_maybe_unoptimize_message - unoptimize msg not managed by a peripheral
2135 * @msg: the message to unoptimize
2136 *
2137 * This function is used to unoptimize a message if and only if it was
2138 * optimized by the core (via spi_maybe_optimize_message()).
2139 */
2140static void spi_maybe_unoptimize_message(struct spi_message *msg)
2141{
2142 if (!msg->pre_optimized && msg->optimized &&
2143 !msg->spi->controller->defer_optimize_message)
2144 __spi_unoptimize_message(msg);
2145}
2146
2147/**
2148 * spi_finalize_current_message() - the current message is complete
2149 * @ctlr: the controller to return the message to
2150 *
2151 * Called by the driver to notify the core that the message in the front of the
2152 * queue is complete and can be removed from the queue.
2153 */
2154void spi_finalize_current_message(struct spi_controller *ctlr)
2155{
2156 struct spi_transfer *xfer;
2157 struct spi_message *mesg;
2158 int ret;
2159
2160 mesg = ctlr->cur_msg;
2161
2162 if (!ctlr->ptp_sts_supported && !ctlr->transfer_one) {
2163 list_for_each_entry(xfer, &mesg->transfers, transfer_list) {
2164 ptp_read_system_postts(xfer->ptp_sts);
2165 xfer->ptp_sts_word_post = xfer->len;
2166 }
2167 }
2168
2169 if (unlikely(ctlr->ptp_sts_supported))
2170 list_for_each_entry(xfer, &mesg->transfers, transfer_list)
2171 WARN_ON_ONCE(xfer->ptp_sts && !xfer->timestamped);
2172
2173 spi_unmap_msg(ctlr, mesg);
2174
2175 if (mesg->prepared && ctlr->unprepare_message) {
2176 ret = ctlr->unprepare_message(ctlr, mesg);
2177 if (ret) {
2178 dev_err(&ctlr->dev, "failed to unprepare message: %d\n",
2179 ret);
2180 }
2181 }
2182
2183 mesg->prepared = false;
2184
2185 spi_maybe_unoptimize_message(mesg);
2186
2187 WRITE_ONCE(ctlr->cur_msg_incomplete, false);
2188 smp_mb(); /* See __spi_pump_transfer_message()... */
2189 if (READ_ONCE(ctlr->cur_msg_need_completion))
2190 complete(&ctlr->cur_msg_completion);
2191
2192 trace_spi_message_done(mesg);
2193
2194 mesg->state = NULL;
2195 if (mesg->complete)
2196 mesg->complete(mesg->context);
2197}
2198EXPORT_SYMBOL_GPL(spi_finalize_current_message);
2199
2200static int spi_start_queue(struct spi_controller *ctlr)
2201{
2202 unsigned long flags;
2203
2204 spin_lock_irqsave(&ctlr->queue_lock, flags);
2205
2206 if (ctlr->running || ctlr->busy) {
2207 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
2208 return -EBUSY;
2209 }
2210
2211 ctlr->running = true;
2212 ctlr->cur_msg = NULL;
2213 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
2214
2215 kthread_queue_work(ctlr->kworker, &ctlr->pump_messages);
2216
2217 return 0;
2218}
2219
2220static int spi_stop_queue(struct spi_controller *ctlr)
2221{
2222 unsigned int limit = 500;
2223 unsigned long flags;
2224
2225 /*
2226 * This is a bit lame, but is optimized for the common execution path.
2227 * A wait_queue on the ctlr->busy could be used, but then the common
2228 * execution path (pump_messages) would be required to call wake_up or
2229 * friends on every SPI message. Do this instead.
2230 */
2231 do {
2232 spin_lock_irqsave(&ctlr->queue_lock, flags);
2233 if (list_empty(&ctlr->queue) && !ctlr->busy) {
2234 ctlr->running = false;
2235 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
2236 return 0;
2237 }
2238 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
2239 usleep_range(10000, 11000);
2240 } while (--limit);
2241
2242 return -EBUSY;
2243}
2244
2245static int spi_destroy_queue(struct spi_controller *ctlr)
2246{
2247 int ret;
2248
2249 ret = spi_stop_queue(ctlr);
2250
2251 /*
2252 * kthread_flush_worker will block until all work is done.
2253 * If the reason that stop_queue timed out is that the work will never
2254 * finish, then it does no good to call flush/stop thread, so
2255 * return anyway.
2256 */
2257 if (ret) {
2258 dev_err(&ctlr->dev, "problem destroying queue\n");
2259 return ret;
2260 }
2261
2262 kthread_destroy_worker(ctlr->kworker);
2263
2264 return 0;
2265}
2266
2267static int __spi_queued_transfer(struct spi_device *spi,
2268 struct spi_message *msg,
2269 bool need_pump)
2270{
2271 struct spi_controller *ctlr = spi->controller;
2272 unsigned long flags;
2273
2274 spin_lock_irqsave(&ctlr->queue_lock, flags);
2275
2276 if (!ctlr->running) {
2277 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
2278 return -ESHUTDOWN;
2279 }
2280 msg->actual_length = 0;
2281 msg->status = -EINPROGRESS;
2282
2283 list_add_tail(&msg->queue, &ctlr->queue);
2284 ctlr->queue_empty = false;
2285 if (!ctlr->busy && need_pump)
2286 kthread_queue_work(ctlr->kworker, &ctlr->pump_messages);
2287
2288 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
2289 return 0;
2290}
2291
2292/**
2293 * spi_queued_transfer - transfer function for queued transfers
2294 * @spi: SPI device which is requesting transfer
2295 * @msg: SPI message which is to handled is queued to driver queue
2296 *
2297 * Return: zero on success, else a negative error code.
2298 */
2299static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
2300{
2301 return __spi_queued_transfer(spi, msg, true);
2302}
2303
2304static int spi_controller_initialize_queue(struct spi_controller *ctlr)
2305{
2306 int ret;
2307
2308 ctlr->transfer = spi_queued_transfer;
2309 if (!ctlr->transfer_one_message)
2310 ctlr->transfer_one_message = spi_transfer_one_message;
2311
2312 /* Initialize and start queue */
2313 ret = spi_init_queue(ctlr);
2314 if (ret) {
2315 dev_err(&ctlr->dev, "problem initializing queue\n");
2316 goto err_init_queue;
2317 }
2318 ctlr->queued = true;
2319 ret = spi_start_queue(ctlr);
2320 if (ret) {
2321 dev_err(&ctlr->dev, "problem starting queue\n");
2322 goto err_start_queue;
2323 }
2324
2325 return 0;
2326
2327err_start_queue:
2328 spi_destroy_queue(ctlr);
2329err_init_queue:
2330 return ret;
2331}
2332
2333/**
2334 * spi_flush_queue - Send all pending messages in the queue from the callers'
2335 * context
2336 * @ctlr: controller to process queue for
2337 *
2338 * This should be used when one wants to ensure all pending messages have been
2339 * sent before doing something. Is used by the spi-mem code to make sure SPI
2340 * memory operations do not preempt regular SPI transfers that have been queued
2341 * before the spi-mem operation.
2342 */
2343void spi_flush_queue(struct spi_controller *ctlr)
2344{
2345 if (ctlr->transfer == spi_queued_transfer)
2346 __spi_pump_messages(ctlr, false);
2347}
2348
2349/*-------------------------------------------------------------------------*/
2350
2351#if defined(CONFIG_OF)
2352static void of_spi_parse_dt_cs_delay(struct device_node *nc,
2353 struct spi_delay *delay, const char *prop)
2354{
2355 u32 value;
2356
2357 if (!of_property_read_u32(nc, prop, &value)) {
2358 if (value > U16_MAX) {
2359 delay->value = DIV_ROUND_UP(value, 1000);
2360 delay->unit = SPI_DELAY_UNIT_USECS;
2361 } else {
2362 delay->value = value;
2363 delay->unit = SPI_DELAY_UNIT_NSECS;
2364 }
2365 }
2366}
2367
2368static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
2369 struct device_node *nc)
2370{
2371 u32 value, cs[SPI_CS_CNT_MAX];
2372 int rc, idx;
2373
2374 /* Mode (clock phase/polarity/etc.) */
2375 if (of_property_read_bool(nc, "spi-cpha"))
2376 spi->mode |= SPI_CPHA;
2377 if (of_property_read_bool(nc, "spi-cpol"))
2378 spi->mode |= SPI_CPOL;
2379 if (of_property_read_bool(nc, "spi-3wire"))
2380 spi->mode |= SPI_3WIRE;
2381 if (of_property_read_bool(nc, "spi-lsb-first"))
2382 spi->mode |= SPI_LSB_FIRST;
2383 if (of_property_read_bool(nc, "spi-cs-high"))
2384 spi->mode |= SPI_CS_HIGH;
2385
2386 /* Device DUAL/QUAD mode */
2387 if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
2388 switch (value) {
2389 case 0:
2390 spi->mode |= SPI_NO_TX;
2391 break;
2392 case 1:
2393 break;
2394 case 2:
2395 spi->mode |= SPI_TX_DUAL;
2396 break;
2397 case 4:
2398 spi->mode |= SPI_TX_QUAD;
2399 break;
2400 case 8:
2401 spi->mode |= SPI_TX_OCTAL;
2402 break;
2403 default:
2404 dev_warn(&ctlr->dev,
2405 "spi-tx-bus-width %d not supported\n",
2406 value);
2407 break;
2408 }
2409 }
2410
2411 if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
2412 switch (value) {
2413 case 0:
2414 spi->mode |= SPI_NO_RX;
2415 break;
2416 case 1:
2417 break;
2418 case 2:
2419 spi->mode |= SPI_RX_DUAL;
2420 break;
2421 case 4:
2422 spi->mode |= SPI_RX_QUAD;
2423 break;
2424 case 8:
2425 spi->mode |= SPI_RX_OCTAL;
2426 break;
2427 default:
2428 dev_warn(&ctlr->dev,
2429 "spi-rx-bus-width %d not supported\n",
2430 value);
2431 break;
2432 }
2433 }
2434
2435 if (spi_controller_is_target(ctlr)) {
2436 if (!of_node_name_eq(nc, "slave")) {
2437 dev_err(&ctlr->dev, "%pOF is not called 'slave'\n",
2438 nc);
2439 return -EINVAL;
2440 }
2441 return 0;
2442 }
2443
2444 if (ctlr->num_chipselect > SPI_CS_CNT_MAX) {
2445 dev_err(&ctlr->dev, "No. of CS is more than max. no. of supported CS\n");
2446 return -EINVAL;
2447 }
2448
2449 spi_set_all_cs_unused(spi);
2450
2451 /* Device address */
2452 rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1,
2453 SPI_CS_CNT_MAX);
2454 if (rc < 0) {
2455 dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
2456 nc, rc);
2457 return rc;
2458 }
2459 if (rc > ctlr->num_chipselect) {
2460 dev_err(&ctlr->dev, "%pOF has number of CS > ctlr->num_chipselect (%d)\n",
2461 nc, rc);
2462 return rc;
2463 }
2464 if ((of_property_present(nc, "parallel-memories")) &&
2465 (!(ctlr->flags & SPI_CONTROLLER_MULTI_CS))) {
2466 dev_err(&ctlr->dev, "SPI controller doesn't support multi CS\n");
2467 return -EINVAL;
2468 }
2469 for (idx = 0; idx < rc; idx++)
2470 spi_set_chipselect(spi, idx, cs[idx]);
2471
2472 /*
2473 * By default spi->chip_select[0] will hold the physical CS number,
2474 * so set bit 0 in spi->cs_index_mask.
2475 */
2476 spi->cs_index_mask = BIT(0);
2477
2478 /* Device speed */
2479 if (!of_property_read_u32(nc, "spi-max-frequency", &value))
2480 spi->max_speed_hz = value;
2481
2482 /* Device CS delays */
2483 of_spi_parse_dt_cs_delay(nc, &spi->cs_setup, "spi-cs-setup-delay-ns");
2484 of_spi_parse_dt_cs_delay(nc, &spi->cs_hold, "spi-cs-hold-delay-ns");
2485 of_spi_parse_dt_cs_delay(nc, &spi->cs_inactive, "spi-cs-inactive-delay-ns");
2486
2487 return 0;
2488}
2489
2490static struct spi_device *
2491of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
2492{
2493 struct spi_device *spi;
2494 int rc;
2495
2496 /* Alloc an spi_device */
2497 spi = spi_alloc_device(ctlr);
2498 if (!spi) {
2499 dev_err(&ctlr->dev, "spi_device alloc error for %pOF\n", nc);
2500 rc = -ENOMEM;
2501 goto err_out;
2502 }
2503
2504 /* Select device driver */
2505 rc = of_alias_from_compatible(nc, spi->modalias,
2506 sizeof(spi->modalias));
2507 if (rc < 0) {
2508 dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
2509 goto err_out;
2510 }
2511
2512 rc = of_spi_parse_dt(ctlr, spi, nc);
2513 if (rc)
2514 goto err_out;
2515
2516 /* Store a pointer to the node in the device structure */
2517 of_node_get(nc);
2518
2519 device_set_node(&spi->dev, of_fwnode_handle(nc));
2520
2521 /* Register the new device */
2522 rc = spi_add_device(spi);
2523 if (rc) {
2524 dev_err(&ctlr->dev, "spi_device register error %pOF\n", nc);
2525 goto err_of_node_put;
2526 }
2527
2528 return spi;
2529
2530err_of_node_put:
2531 of_node_put(nc);
2532err_out:
2533 spi_dev_put(spi);
2534 return ERR_PTR(rc);
2535}
2536
2537/**
2538 * of_register_spi_devices() - Register child devices onto the SPI bus
2539 * @ctlr: Pointer to spi_controller device
2540 *
2541 * Registers an spi_device for each child node of controller node which
2542 * represents a valid SPI slave.
2543 */
2544static void of_register_spi_devices(struct spi_controller *ctlr)
2545{
2546 struct spi_device *spi;
2547 struct device_node *nc;
2548
2549 for_each_available_child_of_node(ctlr->dev.of_node, nc) {
2550 if (of_node_test_and_set_flag(nc, OF_POPULATED))
2551 continue;
2552 spi = of_register_spi_device(ctlr, nc);
2553 if (IS_ERR(spi)) {
2554 dev_warn(&ctlr->dev,
2555 "Failed to create SPI device for %pOF\n", nc);
2556 of_node_clear_flag(nc, OF_POPULATED);
2557 }
2558 }
2559}
2560#else
2561static void of_register_spi_devices(struct spi_controller *ctlr) { }
2562#endif
2563
2564/**
2565 * spi_new_ancillary_device() - Register ancillary SPI device
2566 * @spi: Pointer to the main SPI device registering the ancillary device
2567 * @chip_select: Chip Select of the ancillary device
2568 *
2569 * Register an ancillary SPI device; for example some chips have a chip-select
2570 * for normal device usage and another one for setup/firmware upload.
2571 *
2572 * This may only be called from main SPI device's probe routine.
2573 *
2574 * Return: 0 on success; negative errno on failure
2575 */
2576struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
2577 u8 chip_select)
2578{
2579 struct spi_controller *ctlr = spi->controller;
2580 struct spi_device *ancillary;
2581 int rc;
2582
2583 /* Alloc an spi_device */
2584 ancillary = spi_alloc_device(ctlr);
2585 if (!ancillary) {
2586 rc = -ENOMEM;
2587 goto err_out;
2588 }
2589
2590 strscpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias));
2591
2592 /* Use provided chip-select for ancillary device */
2593 spi_set_all_cs_unused(ancillary);
2594 spi_set_chipselect(ancillary, 0, chip_select);
2595
2596 /* Take over SPI mode/speed from SPI main device */
2597 ancillary->max_speed_hz = spi->max_speed_hz;
2598 ancillary->mode = spi->mode;
2599 /*
2600 * By default spi->chip_select[0] will hold the physical CS number,
2601 * so set bit 0 in spi->cs_index_mask.
2602 */
2603 ancillary->cs_index_mask = BIT(0);
2604
2605 WARN_ON(!mutex_is_locked(&ctlr->add_lock));
2606
2607 /* Register the new device */
2608 rc = __spi_add_device(ancillary);
2609 if (rc) {
2610 dev_err(&spi->dev, "failed to register ancillary device\n");
2611 goto err_out;
2612 }
2613
2614 return ancillary;
2615
2616err_out:
2617 spi_dev_put(ancillary);
2618 return ERR_PTR(rc);
2619}
2620EXPORT_SYMBOL_GPL(spi_new_ancillary_device);
2621
2622#ifdef CONFIG_ACPI
2623struct acpi_spi_lookup {
2624 struct spi_controller *ctlr;
2625 u32 max_speed_hz;
2626 u32 mode;
2627 int irq;
2628 u8 bits_per_word;
2629 u8 chip_select;
2630 int n;
2631 int index;
2632};
2633
2634static int acpi_spi_count(struct acpi_resource *ares, void *data)
2635{
2636 struct acpi_resource_spi_serialbus *sb;
2637 int *count = data;
2638
2639 if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
2640 return 1;
2641
2642 sb = &ares->data.spi_serial_bus;
2643 if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_SPI)
2644 return 1;
2645
2646 *count = *count + 1;
2647
2648 return 1;
2649}
2650
2651/**
2652 * acpi_spi_count_resources - Count the number of SpiSerialBus resources
2653 * @adev: ACPI device
2654 *
2655 * Return: the number of SpiSerialBus resources in the ACPI-device's
2656 * resource-list; or a negative error code.
2657 */
2658int acpi_spi_count_resources(struct acpi_device *adev)
2659{
2660 LIST_HEAD(r);
2661 int count = 0;
2662 int ret;
2663
2664 ret = acpi_dev_get_resources(adev, &r, acpi_spi_count, &count);
2665 if (ret < 0)
2666 return ret;
2667
2668 acpi_dev_free_resource_list(&r);
2669
2670 return count;
2671}
2672EXPORT_SYMBOL_GPL(acpi_spi_count_resources);
2673
2674static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
2675 struct acpi_spi_lookup *lookup)
2676{
2677 const union acpi_object *obj;
2678
2679 if (!x86_apple_machine)
2680 return;
2681
2682 if (!acpi_dev_get_property(dev, "spiSclkPeriod", ACPI_TYPE_BUFFER, &obj)
2683 && obj->buffer.length >= 4)
2684 lookup->max_speed_hz = NSEC_PER_SEC / *(u32 *)obj->buffer.pointer;
2685
2686 if (!acpi_dev_get_property(dev, "spiWordSize", ACPI_TYPE_BUFFER, &obj)
2687 && obj->buffer.length == 8)
2688 lookup->bits_per_word = *(u64 *)obj->buffer.pointer;
2689
2690 if (!acpi_dev_get_property(dev, "spiBitOrder", ACPI_TYPE_BUFFER, &obj)
2691 && obj->buffer.length == 8 && !*(u64 *)obj->buffer.pointer)
2692 lookup->mode |= SPI_LSB_FIRST;
2693
2694 if (!acpi_dev_get_property(dev, "spiSPO", ACPI_TYPE_BUFFER, &obj)
2695 && obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
2696 lookup->mode |= SPI_CPOL;
2697
2698 if (!acpi_dev_get_property(dev, "spiSPH", ACPI_TYPE_BUFFER, &obj)
2699 && obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
2700 lookup->mode |= SPI_CPHA;
2701}
2702
2703static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
2704{
2705 struct acpi_spi_lookup *lookup = data;
2706 struct spi_controller *ctlr = lookup->ctlr;
2707
2708 if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
2709 struct acpi_resource_spi_serialbus *sb;
2710 acpi_handle parent_handle;
2711 acpi_status status;
2712
2713 sb = &ares->data.spi_serial_bus;
2714 if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
2715
2716 if (lookup->index != -1 && lookup->n++ != lookup->index)
2717 return 1;
2718
2719 status = acpi_get_handle(NULL,
2720 sb->resource_source.string_ptr,
2721 &parent_handle);
2722
2723 if (ACPI_FAILURE(status))
2724 return -ENODEV;
2725
2726 if (ctlr) {
2727 if (!device_match_acpi_handle(ctlr->dev.parent, parent_handle))
2728 return -ENODEV;
2729 } else {
2730 struct acpi_device *adev;
2731
2732 adev = acpi_fetch_acpi_dev(parent_handle);
2733 if (!adev)
2734 return -ENODEV;
2735
2736 ctlr = acpi_spi_find_controller_by_adev(adev);
2737 if (!ctlr)
2738 return -EPROBE_DEFER;
2739
2740 lookup->ctlr = ctlr;
2741 }
2742
2743 /*
2744 * ACPI DeviceSelection numbering is handled by the
2745 * host controller driver in Windows and can vary
2746 * from driver to driver. In Linux we always expect
2747 * 0 .. max - 1 so we need to ask the driver to
2748 * translate between the two schemes.
2749 */
2750 if (ctlr->fw_translate_cs) {
2751 int cs = ctlr->fw_translate_cs(ctlr,
2752 sb->device_selection);
2753 if (cs < 0)
2754 return cs;
2755 lookup->chip_select = cs;
2756 } else {
2757 lookup->chip_select = sb->device_selection;
2758 }
2759
2760 lookup->max_speed_hz = sb->connection_speed;
2761 lookup->bits_per_word = sb->data_bit_length;
2762
2763 if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
2764 lookup->mode |= SPI_CPHA;
2765 if (sb->clock_polarity == ACPI_SPI_START_HIGH)
2766 lookup->mode |= SPI_CPOL;
2767 if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
2768 lookup->mode |= SPI_CS_HIGH;
2769 }
2770 } else if (lookup->irq < 0) {
2771 struct resource r;
2772
2773 if (acpi_dev_resource_interrupt(ares, 0, &r))
2774 lookup->irq = r.start;
2775 }
2776
2777 /* Always tell the ACPI core to skip this resource */
2778 return 1;
2779}
2780
2781/**
2782 * acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
2783 * @ctlr: controller to which the spi device belongs
2784 * @adev: ACPI Device for the spi device
2785 * @index: Index of the spi resource inside the ACPI Node
2786 *
2787 * This should be used to allocate a new SPI device from and ACPI Device node.
2788 * The caller is responsible for calling spi_add_device to register the SPI device.
2789 *
2790 * If ctlr is set to NULL, the Controller for the SPI device will be looked up
2791 * using the resource.
2792 * If index is set to -1, index is not used.
2793 * Note: If index is -1, ctlr must be set.
2794 *
2795 * Return: a pointer to the new device, or ERR_PTR on error.
2796 */
2797struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
2798 struct acpi_device *adev,
2799 int index)
2800{
2801 acpi_handle parent_handle = NULL;
2802 struct list_head resource_list;
2803 struct acpi_spi_lookup lookup = {};
2804 struct spi_device *spi;
2805 int ret;
2806
2807 if (!ctlr && index == -1)
2808 return ERR_PTR(-EINVAL);
2809
2810 lookup.ctlr = ctlr;
2811 lookup.irq = -1;
2812 lookup.index = index;
2813 lookup.n = 0;
2814
2815 INIT_LIST_HEAD(&resource_list);
2816 ret = acpi_dev_get_resources(adev, &resource_list,
2817 acpi_spi_add_resource, &lookup);
2818 acpi_dev_free_resource_list(&resource_list);
2819
2820 if (ret < 0)
2821 /* Found SPI in _CRS but it points to another controller */
2822 return ERR_PTR(ret);
2823
2824 if (!lookup.max_speed_hz &&
2825 ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
2826 device_match_acpi_handle(lookup.ctlr->dev.parent, parent_handle)) {
2827 /* Apple does not use _CRS but nested devices for SPI slaves */
2828 acpi_spi_parse_apple_properties(adev, &lookup);
2829 }
2830
2831 if (!lookup.max_speed_hz)
2832 return ERR_PTR(-ENODEV);
2833
2834 spi = spi_alloc_device(lookup.ctlr);
2835 if (!spi) {
2836 dev_err(&lookup.ctlr->dev, "failed to allocate SPI device for %s\n",
2837 dev_name(&adev->dev));
2838 return ERR_PTR(-ENOMEM);
2839 }
2840
2841 spi_set_all_cs_unused(spi);
2842 spi_set_chipselect(spi, 0, lookup.chip_select);
2843
2844 ACPI_COMPANION_SET(&spi->dev, adev);
2845 spi->max_speed_hz = lookup.max_speed_hz;
2846 spi->mode |= lookup.mode;
2847 spi->irq = lookup.irq;
2848 spi->bits_per_word = lookup.bits_per_word;
2849 /*
2850 * By default spi->chip_select[0] will hold the physical CS number,
2851 * so set bit 0 in spi->cs_index_mask.
2852 */
2853 spi->cs_index_mask = BIT(0);
2854
2855 return spi;
2856}
2857EXPORT_SYMBOL_GPL(acpi_spi_device_alloc);
2858
2859static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
2860 struct acpi_device *adev)
2861{
2862 struct spi_device *spi;
2863
2864 if (acpi_bus_get_status(adev) || !adev->status.present ||
2865 acpi_device_enumerated(adev))
2866 return AE_OK;
2867
2868 spi = acpi_spi_device_alloc(ctlr, adev, -1);
2869 if (IS_ERR(spi)) {
2870 if (PTR_ERR(spi) == -ENOMEM)
2871 return AE_NO_MEMORY;
2872 else
2873 return AE_OK;
2874 }
2875
2876 acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
2877 sizeof(spi->modalias));
2878
2879 acpi_device_set_enumerated(adev);
2880
2881 adev->power.flags.ignore_parent = true;
2882 if (spi_add_device(spi)) {
2883 adev->power.flags.ignore_parent = false;
2884 dev_err(&ctlr->dev, "failed to add SPI device %s from ACPI\n",
2885 dev_name(&adev->dev));
2886 spi_dev_put(spi);
2887 }
2888
2889 return AE_OK;
2890}
2891
2892static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
2893 void *data, void **return_value)
2894{
2895 struct acpi_device *adev = acpi_fetch_acpi_dev(handle);
2896 struct spi_controller *ctlr = data;
2897
2898 if (!adev)
2899 return AE_OK;
2900
2901 return acpi_register_spi_device(ctlr, adev);
2902}
2903
2904#define SPI_ACPI_ENUMERATE_MAX_DEPTH 32
2905
2906static void acpi_register_spi_devices(struct spi_controller *ctlr)
2907{
2908 acpi_status status;
2909 acpi_handle handle;
2910
2911 handle = ACPI_HANDLE(ctlr->dev.parent);
2912 if (!handle)
2913 return;
2914
2915 status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
2916 SPI_ACPI_ENUMERATE_MAX_DEPTH,
2917 acpi_spi_add_device, NULL, ctlr, NULL);
2918 if (ACPI_FAILURE(status))
2919 dev_warn(&ctlr->dev, "failed to enumerate SPI slaves\n");
2920}
2921#else
2922static inline void acpi_register_spi_devices(struct spi_controller *ctlr) {}
2923#endif /* CONFIG_ACPI */
2924
2925static void spi_controller_release(struct device *dev)
2926{
2927 struct spi_controller *ctlr;
2928
2929 ctlr = container_of(dev, struct spi_controller, dev);
2930 kfree(ctlr);
2931}
2932
2933static const struct class spi_master_class = {
2934 .name = "spi_master",
2935 .dev_release = spi_controller_release,
2936 .dev_groups = spi_master_groups,
2937};
2938
2939#ifdef CONFIG_SPI_SLAVE
2940/**
2941 * spi_target_abort - abort the ongoing transfer request on an SPI slave
2942 * controller
2943 * @spi: device used for the current transfer
2944 */
2945int spi_target_abort(struct spi_device *spi)
2946{
2947 struct spi_controller *ctlr = spi->controller;
2948
2949 if (spi_controller_is_target(ctlr) && ctlr->target_abort)
2950 return ctlr->target_abort(ctlr);
2951
2952 return -ENOTSUPP;
2953}
2954EXPORT_SYMBOL_GPL(spi_target_abort);
2955
2956static ssize_t slave_show(struct device *dev, struct device_attribute *attr,
2957 char *buf)
2958{
2959 struct spi_controller *ctlr = container_of(dev, struct spi_controller,
2960 dev);
2961 struct device *child;
2962
2963 child = device_find_any_child(&ctlr->dev);
2964 return sysfs_emit(buf, "%s\n", child ? to_spi_device(child)->modalias : NULL);
2965}
2966
2967static ssize_t slave_store(struct device *dev, struct device_attribute *attr,
2968 const char *buf, size_t count)
2969{
2970 struct spi_controller *ctlr = container_of(dev, struct spi_controller,
2971 dev);
2972 struct spi_device *spi;
2973 struct device *child;
2974 char name[32];
2975 int rc;
2976
2977 rc = sscanf(buf, "%31s", name);
2978 if (rc != 1 || !name[0])
2979 return -EINVAL;
2980
2981 child = device_find_any_child(&ctlr->dev);
2982 if (child) {
2983 /* Remove registered slave */
2984 device_unregister(child);
2985 put_device(child);
2986 }
2987
2988 if (strcmp(name, "(null)")) {
2989 /* Register new slave */
2990 spi = spi_alloc_device(ctlr);
2991 if (!spi)
2992 return -ENOMEM;
2993
2994 strscpy(spi->modalias, name, sizeof(spi->modalias));
2995
2996 rc = spi_add_device(spi);
2997 if (rc) {
2998 spi_dev_put(spi);
2999 return rc;
3000 }
3001 }
3002
3003 return count;
3004}
3005
3006static DEVICE_ATTR_RW(slave);
3007
3008static struct attribute *spi_slave_attrs[] = {
3009 &dev_attr_slave.attr,
3010 NULL,
3011};
3012
3013static const struct attribute_group spi_slave_group = {
3014 .attrs = spi_slave_attrs,
3015};
3016
3017static const struct attribute_group *spi_slave_groups[] = {
3018 &spi_controller_statistics_group,
3019 &spi_slave_group,
3020 NULL,
3021};
3022
3023static const struct class spi_slave_class = {
3024 .name = "spi_slave",
3025 .dev_release = spi_controller_release,
3026 .dev_groups = spi_slave_groups,
3027};
3028#else
3029extern struct class spi_slave_class; /* dummy */
3030#endif
3031
3032/**
3033 * __spi_alloc_controller - allocate an SPI master or slave controller
3034 * @dev: the controller, possibly using the platform_bus
3035 * @size: how much zeroed driver-private data to allocate; the pointer to this
3036 * memory is in the driver_data field of the returned device, accessible
3037 * with spi_controller_get_devdata(); the memory is cacheline aligned;
3038 * drivers granting DMA access to portions of their private data need to
3039 * round up @size using ALIGN(size, dma_get_cache_alignment()).
3040 * @slave: flag indicating whether to allocate an SPI master (false) or SPI
3041 * slave (true) controller
3042 * Context: can sleep
3043 *
3044 * This call is used only by SPI controller drivers, which are the
3045 * only ones directly touching chip registers. It's how they allocate
3046 * an spi_controller structure, prior to calling spi_register_controller().
3047 *
3048 * This must be called from context that can sleep.
3049 *
3050 * The caller is responsible for assigning the bus number and initializing the
3051 * controller's methods before calling spi_register_controller(); and (after
3052 * errors adding the device) calling spi_controller_put() to prevent a memory
3053 * leak.
3054 *
3055 * Return: the SPI controller structure on success, else NULL.
3056 */
3057struct spi_controller *__spi_alloc_controller(struct device *dev,
3058 unsigned int size, bool slave)
3059{
3060 struct spi_controller *ctlr;
3061 size_t ctlr_size = ALIGN(sizeof(*ctlr), dma_get_cache_alignment());
3062
3063 if (!dev)
3064 return NULL;
3065
3066 ctlr = kzalloc(size + ctlr_size, GFP_KERNEL);
3067 if (!ctlr)
3068 return NULL;
3069
3070 device_initialize(&ctlr->dev);
3071 INIT_LIST_HEAD(&ctlr->queue);
3072 spin_lock_init(&ctlr->queue_lock);
3073 spin_lock_init(&ctlr->bus_lock_spinlock);
3074 mutex_init(&ctlr->bus_lock_mutex);
3075 mutex_init(&ctlr->io_mutex);
3076 mutex_init(&ctlr->add_lock);
3077 ctlr->bus_num = -1;
3078 ctlr->num_chipselect = 1;
3079 ctlr->slave = slave;
3080 if (IS_ENABLED(CONFIG_SPI_SLAVE) && slave)
3081 ctlr->dev.class = &spi_slave_class;
3082 else
3083 ctlr->dev.class = &spi_master_class;
3084 ctlr->dev.parent = dev;
3085 pm_suspend_ignore_children(&ctlr->dev, true);
3086 spi_controller_set_devdata(ctlr, (void *)ctlr + ctlr_size);
3087
3088 return ctlr;
3089}
3090EXPORT_SYMBOL_GPL(__spi_alloc_controller);
3091
3092static void devm_spi_release_controller(struct device *dev, void *ctlr)
3093{
3094 spi_controller_put(*(struct spi_controller **)ctlr);
3095}
3096
3097/**
3098 * __devm_spi_alloc_controller - resource-managed __spi_alloc_controller()
3099 * @dev: physical device of SPI controller
3100 * @size: how much zeroed driver-private data to allocate
3101 * @slave: whether to allocate an SPI master (false) or SPI slave (true)
3102 * Context: can sleep
3103 *
3104 * Allocate an SPI controller and automatically release a reference on it
3105 * when @dev is unbound from its driver. Drivers are thus relieved from
3106 * having to call spi_controller_put().
3107 *
3108 * The arguments to this function are identical to __spi_alloc_controller().
3109 *
3110 * Return: the SPI controller structure on success, else NULL.
3111 */
3112struct spi_controller *__devm_spi_alloc_controller(struct device *dev,
3113 unsigned int size,
3114 bool slave)
3115{
3116 struct spi_controller **ptr, *ctlr;
3117
3118 ptr = devres_alloc(devm_spi_release_controller, sizeof(*ptr),
3119 GFP_KERNEL);
3120 if (!ptr)
3121 return NULL;
3122
3123 ctlr = __spi_alloc_controller(dev, size, slave);
3124 if (ctlr) {
3125 ctlr->devm_allocated = true;
3126 *ptr = ctlr;
3127 devres_add(dev, ptr);
3128 } else {
3129 devres_free(ptr);
3130 }
3131
3132 return ctlr;
3133}
3134EXPORT_SYMBOL_GPL(__devm_spi_alloc_controller);
3135
3136/**
3137 * spi_get_gpio_descs() - grab chip select GPIOs for the master
3138 * @ctlr: The SPI master to grab GPIO descriptors for
3139 */
3140static int spi_get_gpio_descs(struct spi_controller *ctlr)
3141{
3142 int nb, i;
3143 struct gpio_desc **cs;
3144 struct device *dev = &ctlr->dev;
3145 unsigned long native_cs_mask = 0;
3146 unsigned int num_cs_gpios = 0;
3147
3148 nb = gpiod_count(dev, "cs");
3149 if (nb < 0) {
3150 /* No GPIOs at all is fine, else return the error */
3151 if (nb == -ENOENT)
3152 return 0;
3153 return nb;
3154 }
3155
3156 ctlr->num_chipselect = max_t(int, nb, ctlr->num_chipselect);
3157
3158 cs = devm_kcalloc(dev, ctlr->num_chipselect, sizeof(*cs),
3159 GFP_KERNEL);
3160 if (!cs)
3161 return -ENOMEM;
3162 ctlr->cs_gpiods = cs;
3163
3164 for (i = 0; i < nb; i++) {
3165 /*
3166 * Most chipselects are active low, the inverted
3167 * semantics are handled by special quirks in gpiolib,
3168 * so initializing them GPIOD_OUT_LOW here means
3169 * "unasserted", in most cases this will drive the physical
3170 * line high.
3171 */
3172 cs[i] = devm_gpiod_get_index_optional(dev, "cs", i,
3173 GPIOD_OUT_LOW);
3174 if (IS_ERR(cs[i]))
3175 return PTR_ERR(cs[i]);
3176
3177 if (cs[i]) {
3178 /*
3179 * If we find a CS GPIO, name it after the device and
3180 * chip select line.
3181 */
3182 char *gpioname;
3183
3184 gpioname = devm_kasprintf(dev, GFP_KERNEL, "%s CS%d",
3185 dev_name(dev), i);
3186 if (!gpioname)
3187 return -ENOMEM;
3188 gpiod_set_consumer_name(cs[i], gpioname);
3189 num_cs_gpios++;
3190 continue;
3191 }
3192
3193 if (ctlr->max_native_cs && i >= ctlr->max_native_cs) {
3194 dev_err(dev, "Invalid native chip select %d\n", i);
3195 return -EINVAL;
3196 }
3197 native_cs_mask |= BIT(i);
3198 }
3199
3200 ctlr->unused_native_cs = ffs(~native_cs_mask) - 1;
3201
3202 if ((ctlr->flags & SPI_CONTROLLER_GPIO_SS) && num_cs_gpios &&
3203 ctlr->max_native_cs && ctlr->unused_native_cs >= ctlr->max_native_cs) {
3204 dev_err(dev, "No unused native chip select available\n");
3205 return -EINVAL;
3206 }
3207
3208 return 0;
3209}
3210
3211static int spi_controller_check_ops(struct spi_controller *ctlr)
3212{
3213 /*
3214 * The controller may implement only the high-level SPI-memory like
3215 * operations if it does not support regular SPI transfers, and this is
3216 * valid use case.
3217 * If ->mem_ops or ->mem_ops->exec_op is NULL, we request that at least
3218 * one of the ->transfer_xxx() method be implemented.
3219 */
3220 if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
3221 if (!ctlr->transfer && !ctlr->transfer_one &&
3222 !ctlr->transfer_one_message) {
3223 return -EINVAL;
3224 }
3225 }
3226
3227 return 0;
3228}
3229
3230/* Allocate dynamic bus number using Linux idr */
3231static int spi_controller_id_alloc(struct spi_controller *ctlr, int start, int end)
3232{
3233 int id;
3234
3235 mutex_lock(&board_lock);
3236 id = idr_alloc(&spi_master_idr, ctlr, start, end, GFP_KERNEL);
3237 mutex_unlock(&board_lock);
3238 if (WARN(id < 0, "couldn't get idr"))
3239 return id == -ENOSPC ? -EBUSY : id;
3240 ctlr->bus_num = id;
3241 return 0;
3242}
3243
3244/**
3245 * spi_register_controller - register SPI host or target controller
3246 * @ctlr: initialized controller, originally from spi_alloc_host() or
3247 * spi_alloc_target()
3248 * Context: can sleep
3249 *
3250 * SPI controllers connect to their drivers using some non-SPI bus,
3251 * such as the platform bus. The final stage of probe() in that code
3252 * includes calling spi_register_controller() to hook up to this SPI bus glue.
3253 *
3254 * SPI controllers use board specific (often SOC specific) bus numbers,
3255 * and board-specific addressing for SPI devices combines those numbers
3256 * with chip select numbers. Since SPI does not directly support dynamic
3257 * device identification, boards need configuration tables telling which
3258 * chip is at which address.
3259 *
3260 * This must be called from context that can sleep. It returns zero on
3261 * success, else a negative error code (dropping the controller's refcount).
3262 * After a successful return, the caller is responsible for calling
3263 * spi_unregister_controller().
3264 *
3265 * Return: zero on success, else a negative error code.
3266 */
3267int spi_register_controller(struct spi_controller *ctlr)
3268{
3269 struct device *dev = ctlr->dev.parent;
3270 struct boardinfo *bi;
3271 int first_dynamic;
3272 int status;
3273 int idx;
3274
3275 if (!dev)
3276 return -ENODEV;
3277
3278 /*
3279 * Make sure all necessary hooks are implemented before registering
3280 * the SPI controller.
3281 */
3282 status = spi_controller_check_ops(ctlr);
3283 if (status)
3284 return status;
3285
3286 if (ctlr->bus_num < 0)
3287 ctlr->bus_num = of_alias_get_id(ctlr->dev.of_node, "spi");
3288 if (ctlr->bus_num >= 0) {
3289 /* Devices with a fixed bus num must check-in with the num */
3290 status = spi_controller_id_alloc(ctlr, ctlr->bus_num, ctlr->bus_num + 1);
3291 if (status)
3292 return status;
3293 }
3294 if (ctlr->bus_num < 0) {
3295 first_dynamic = of_alias_get_highest_id("spi");
3296 if (first_dynamic < 0)
3297 first_dynamic = 0;
3298 else
3299 first_dynamic++;
3300
3301 status = spi_controller_id_alloc(ctlr, first_dynamic, 0);
3302 if (status)
3303 return status;
3304 }
3305 ctlr->bus_lock_flag = 0;
3306 init_completion(&ctlr->xfer_completion);
3307 init_completion(&ctlr->cur_msg_completion);
3308 if (!ctlr->max_dma_len)
3309 ctlr->max_dma_len = INT_MAX;
3310
3311 /*
3312 * Register the device, then userspace will see it.
3313 * Registration fails if the bus ID is in use.
3314 */
3315 dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
3316
3317 if (!spi_controller_is_target(ctlr) && ctlr->use_gpio_descriptors) {
3318 status = spi_get_gpio_descs(ctlr);
3319 if (status)
3320 goto free_bus_id;
3321 /*
3322 * A controller using GPIO descriptors always
3323 * supports SPI_CS_HIGH if need be.
3324 */
3325 ctlr->mode_bits |= SPI_CS_HIGH;
3326 }
3327
3328 /*
3329 * Even if it's just one always-selected device, there must
3330 * be at least one chipselect.
3331 */
3332 if (!ctlr->num_chipselect) {
3333 status = -EINVAL;
3334 goto free_bus_id;
3335 }
3336
3337 /* Setting last_cs to SPI_INVALID_CS means no chip selected */
3338 for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
3339 ctlr->last_cs[idx] = SPI_INVALID_CS;
3340
3341 status = device_add(&ctlr->dev);
3342 if (status < 0)
3343 goto free_bus_id;
3344 dev_dbg(dev, "registered %s %s\n",
3345 spi_controller_is_target(ctlr) ? "target" : "host",
3346 dev_name(&ctlr->dev));
3347
3348 /*
3349 * If we're using a queued driver, start the queue. Note that we don't
3350 * need the queueing logic if the driver is only supporting high-level
3351 * memory operations.
3352 */
3353 if (ctlr->transfer) {
3354 dev_info(dev, "controller is unqueued, this is deprecated\n");
3355 } else if (ctlr->transfer_one || ctlr->transfer_one_message) {
3356 status = spi_controller_initialize_queue(ctlr);
3357 if (status) {
3358 device_del(&ctlr->dev);
3359 goto free_bus_id;
3360 }
3361 }
3362 /* Add statistics */
3363 ctlr->pcpu_statistics = spi_alloc_pcpu_stats(dev);
3364 if (!ctlr->pcpu_statistics) {
3365 dev_err(dev, "Error allocating per-cpu statistics\n");
3366 status = -ENOMEM;
3367 goto destroy_queue;
3368 }
3369
3370 mutex_lock(&board_lock);
3371 list_add_tail(&ctlr->list, &spi_controller_list);
3372 list_for_each_entry(bi, &board_list, list)
3373 spi_match_controller_to_boardinfo(ctlr, &bi->board_info);
3374 mutex_unlock(&board_lock);
3375
3376 /* Register devices from the device tree and ACPI */
3377 of_register_spi_devices(ctlr);
3378 acpi_register_spi_devices(ctlr);
3379 return status;
3380
3381destroy_queue:
3382 spi_destroy_queue(ctlr);
3383free_bus_id:
3384 mutex_lock(&board_lock);
3385 idr_remove(&spi_master_idr, ctlr->bus_num);
3386 mutex_unlock(&board_lock);
3387 return status;
3388}
3389EXPORT_SYMBOL_GPL(spi_register_controller);
3390
3391static void devm_spi_unregister(struct device *dev, void *res)
3392{
3393 spi_unregister_controller(*(struct spi_controller **)res);
3394}
3395
3396/**
3397 * devm_spi_register_controller - register managed SPI host or target
3398 * controller
3399 * @dev: device managing SPI controller
3400 * @ctlr: initialized controller, originally from spi_alloc_host() or
3401 * spi_alloc_target()
3402 * Context: can sleep
3403 *
3404 * Register a SPI device as with spi_register_controller() which will
3405 * automatically be unregistered and freed.
3406 *
3407 * Return: zero on success, else a negative error code.
3408 */
3409int devm_spi_register_controller(struct device *dev,
3410 struct spi_controller *ctlr)
3411{
3412 struct spi_controller **ptr;
3413 int ret;
3414
3415 ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
3416 if (!ptr)
3417 return -ENOMEM;
3418
3419 ret = spi_register_controller(ctlr);
3420 if (!ret) {
3421 *ptr = ctlr;
3422 devres_add(dev, ptr);
3423 } else {
3424 devres_free(ptr);
3425 }
3426
3427 return ret;
3428}
3429EXPORT_SYMBOL_GPL(devm_spi_register_controller);
3430
3431static int __unregister(struct device *dev, void *null)
3432{
3433 spi_unregister_device(to_spi_device(dev));
3434 return 0;
3435}
3436
3437/**
3438 * spi_unregister_controller - unregister SPI master or slave controller
3439 * @ctlr: the controller being unregistered
3440 * Context: can sleep
3441 *
3442 * This call is used only by SPI controller drivers, which are the
3443 * only ones directly touching chip registers.
3444 *
3445 * This must be called from context that can sleep.
3446 *
3447 * Note that this function also drops a reference to the controller.
3448 */
3449void spi_unregister_controller(struct spi_controller *ctlr)
3450{
3451 struct spi_controller *found;
3452 int id = ctlr->bus_num;
3453
3454 /* Prevent addition of new devices, unregister existing ones */
3455 if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
3456 mutex_lock(&ctlr->add_lock);
3457
3458 device_for_each_child(&ctlr->dev, NULL, __unregister);
3459
3460 /* First make sure that this controller was ever added */
3461 mutex_lock(&board_lock);
3462 found = idr_find(&spi_master_idr, id);
3463 mutex_unlock(&board_lock);
3464 if (ctlr->queued) {
3465 if (spi_destroy_queue(ctlr))
3466 dev_err(&ctlr->dev, "queue remove failed\n");
3467 }
3468 mutex_lock(&board_lock);
3469 list_del(&ctlr->list);
3470 mutex_unlock(&board_lock);
3471
3472 device_del(&ctlr->dev);
3473
3474 /* Free bus id */
3475 mutex_lock(&board_lock);
3476 if (found == ctlr)
3477 idr_remove(&spi_master_idr, id);
3478 mutex_unlock(&board_lock);
3479
3480 if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
3481 mutex_unlock(&ctlr->add_lock);
3482
3483 /*
3484 * Release the last reference on the controller if its driver
3485 * has not yet been converted to devm_spi_alloc_host/target().
3486 */
3487 if (!ctlr->devm_allocated)
3488 put_device(&ctlr->dev);
3489}
3490EXPORT_SYMBOL_GPL(spi_unregister_controller);
3491
3492static inline int __spi_check_suspended(const struct spi_controller *ctlr)
3493{
3494 return ctlr->flags & SPI_CONTROLLER_SUSPENDED ? -ESHUTDOWN : 0;
3495}
3496
3497static inline void __spi_mark_suspended(struct spi_controller *ctlr)
3498{
3499 mutex_lock(&ctlr->bus_lock_mutex);
3500 ctlr->flags |= SPI_CONTROLLER_SUSPENDED;
3501 mutex_unlock(&ctlr->bus_lock_mutex);
3502}
3503
3504static inline void __spi_mark_resumed(struct spi_controller *ctlr)
3505{
3506 mutex_lock(&ctlr->bus_lock_mutex);
3507 ctlr->flags &= ~SPI_CONTROLLER_SUSPENDED;
3508 mutex_unlock(&ctlr->bus_lock_mutex);
3509}
3510
3511int spi_controller_suspend(struct spi_controller *ctlr)
3512{
3513 int ret = 0;
3514
3515 /* Basically no-ops for non-queued controllers */
3516 if (ctlr->queued) {
3517 ret = spi_stop_queue(ctlr);
3518 if (ret)
3519 dev_err(&ctlr->dev, "queue stop failed\n");
3520 }
3521
3522 __spi_mark_suspended(ctlr);
3523 return ret;
3524}
3525EXPORT_SYMBOL_GPL(spi_controller_suspend);
3526
3527int spi_controller_resume(struct spi_controller *ctlr)
3528{
3529 int ret = 0;
3530
3531 __spi_mark_resumed(ctlr);
3532
3533 if (ctlr->queued) {
3534 ret = spi_start_queue(ctlr);
3535 if (ret)
3536 dev_err(&ctlr->dev, "queue restart failed\n");
3537 }
3538 return ret;
3539}
3540EXPORT_SYMBOL_GPL(spi_controller_resume);
3541
3542/*-------------------------------------------------------------------------*/
3543
3544/* Core methods for spi_message alterations */
3545
3546static void __spi_replace_transfers_release(struct spi_controller *ctlr,
3547 struct spi_message *msg,
3548 void *res)
3549{
3550 struct spi_replaced_transfers *rxfer = res;
3551 size_t i;
3552
3553 /* Call extra callback if requested */
3554 if (rxfer->release)
3555 rxfer->release(ctlr, msg, res);
3556
3557 /* Insert replaced transfers back into the message */
3558 list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
3559
3560 /* Remove the formerly inserted entries */
3561 for (i = 0; i < rxfer->inserted; i++)
3562 list_del(&rxfer->inserted_transfers[i].transfer_list);
3563}
3564
3565/**
3566 * spi_replace_transfers - replace transfers with several transfers
3567 * and register change with spi_message.resources
3568 * @msg: the spi_message we work upon
3569 * @xfer_first: the first spi_transfer we want to replace
3570 * @remove: number of transfers to remove
3571 * @insert: the number of transfers we want to insert instead
3572 * @release: extra release code necessary in some circumstances
3573 * @extradatasize: extra data to allocate (with alignment guarantees
3574 * of struct @spi_transfer)
3575 * @gfp: gfp flags
3576 *
3577 * Returns: pointer to @spi_replaced_transfers,
3578 * PTR_ERR(...) in case of errors.
3579 */
3580static struct spi_replaced_transfers *spi_replace_transfers(
3581 struct spi_message *msg,
3582 struct spi_transfer *xfer_first,
3583 size_t remove,
3584 size_t insert,
3585 spi_replaced_release_t release,
3586 size_t extradatasize,
3587 gfp_t gfp)
3588{
3589 struct spi_replaced_transfers *rxfer;
3590 struct spi_transfer *xfer;
3591 size_t i;
3592
3593 /* Allocate the structure using spi_res */
3594 rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
3595 struct_size(rxfer, inserted_transfers, insert)
3596 + extradatasize,
3597 gfp);
3598 if (!rxfer)
3599 return ERR_PTR(-ENOMEM);
3600
3601 /* The release code to invoke before running the generic release */
3602 rxfer->release = release;
3603
3604 /* Assign extradata */
3605 if (extradatasize)
3606 rxfer->extradata =
3607 &rxfer->inserted_transfers[insert];
3608
3609 /* Init the replaced_transfers list */
3610 INIT_LIST_HEAD(&rxfer->replaced_transfers);
3611
3612 /*
3613 * Assign the list_entry after which we should reinsert
3614 * the @replaced_transfers - it may be spi_message.messages!
3615 */
3616 rxfer->replaced_after = xfer_first->transfer_list.prev;
3617
3618 /* Remove the requested number of transfers */
3619 for (i = 0; i < remove; i++) {
3620 /*
3621 * If the entry after replaced_after it is msg->transfers
3622 * then we have been requested to remove more transfers
3623 * than are in the list.
3624 */
3625 if (rxfer->replaced_after->next == &msg->transfers) {
3626 dev_err(&msg->spi->dev,
3627 "requested to remove more spi_transfers than are available\n");
3628 /* Insert replaced transfers back into the message */
3629 list_splice(&rxfer->replaced_transfers,
3630 rxfer->replaced_after);
3631
3632 /* Free the spi_replace_transfer structure... */
3633 spi_res_free(rxfer);
3634
3635 /* ...and return with an error */
3636 return ERR_PTR(-EINVAL);
3637 }
3638
3639 /*
3640 * Remove the entry after replaced_after from list of
3641 * transfers and add it to list of replaced_transfers.
3642 */
3643 list_move_tail(rxfer->replaced_after->next,
3644 &rxfer->replaced_transfers);
3645 }
3646
3647 /*
3648 * Create copy of the given xfer with identical settings
3649 * based on the first transfer to get removed.
3650 */
3651 for (i = 0; i < insert; i++) {
3652 /* We need to run in reverse order */
3653 xfer = &rxfer->inserted_transfers[insert - 1 - i];
3654
3655 /* Copy all spi_transfer data */
3656 memcpy(xfer, xfer_first, sizeof(*xfer));
3657
3658 /* Add to list */
3659 list_add(&xfer->transfer_list, rxfer->replaced_after);
3660
3661 /* Clear cs_change and delay for all but the last */
3662 if (i) {
3663 xfer->cs_change = false;
3664 xfer->delay.value = 0;
3665 }
3666 }
3667
3668 /* Set up inserted... */
3669 rxfer->inserted = insert;
3670
3671 /* ...and register it with spi_res/spi_message */
3672 spi_res_add(msg, rxfer);
3673
3674 return rxfer;
3675}
3676
3677static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
3678 struct spi_message *msg,
3679 struct spi_transfer **xferp,
3680 size_t maxsize)
3681{
3682 struct spi_transfer *xfer = *xferp, *xfers;
3683 struct spi_replaced_transfers *srt;
3684 size_t offset;
3685 size_t count, i;
3686
3687 /* Calculate how many we have to replace */
3688 count = DIV_ROUND_UP(xfer->len, maxsize);
3689
3690 /* Create replacement */
3691 srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, GFP_KERNEL);
3692 if (IS_ERR(srt))
3693 return PTR_ERR(srt);
3694 xfers = srt->inserted_transfers;
3695
3696 /*
3697 * Now handle each of those newly inserted spi_transfers.
3698 * Note that the replacements spi_transfers all are preset
3699 * to the same values as *xferp, so tx_buf, rx_buf and len
3700 * are all identical (as well as most others)
3701 * so we just have to fix up len and the pointers.
3702 */
3703
3704 /*
3705 * The first transfer just needs the length modified, so we
3706 * run it outside the loop.
3707 */
3708 xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
3709
3710 /* All the others need rx_buf/tx_buf also set */
3711 for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
3712 /* Update rx_buf, tx_buf and DMA */
3713 if (xfers[i].rx_buf)
3714 xfers[i].rx_buf += offset;
3715 if (xfers[i].tx_buf)
3716 xfers[i].tx_buf += offset;
3717
3718 /* Update length */
3719 xfers[i].len = min(maxsize, xfers[i].len - offset);
3720 }
3721
3722 /*
3723 * We set up xferp to the last entry we have inserted,
3724 * so that we skip those already split transfers.
3725 */
3726 *xferp = &xfers[count - 1];
3727
3728 /* Increment statistics counters */
3729 SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics,
3730 transfers_split_maxsize);
3731 SPI_STATISTICS_INCREMENT_FIELD(msg->spi->pcpu_statistics,
3732 transfers_split_maxsize);
3733
3734 return 0;
3735}
3736
3737/**
3738 * spi_split_transfers_maxsize - split spi transfers into multiple transfers
3739 * when an individual transfer exceeds a
3740 * certain size
3741 * @ctlr: the @spi_controller for this transfer
3742 * @msg: the @spi_message to transform
3743 * @maxsize: the maximum when to apply this
3744 *
3745 * This function allocates resources that are automatically freed during the
3746 * spi message unoptimize phase so this function should only be called from
3747 * optimize_message callbacks.
3748 *
3749 * Return: status of transformation
3750 */
3751int spi_split_transfers_maxsize(struct spi_controller *ctlr,
3752 struct spi_message *msg,
3753 size_t maxsize)
3754{
3755 struct spi_transfer *xfer;
3756 int ret;
3757
3758 /*
3759 * Iterate over the transfer_list,
3760 * but note that xfer is advanced to the last transfer inserted
3761 * to avoid checking sizes again unnecessarily (also xfer does
3762 * potentially belong to a different list by the time the
3763 * replacement has happened).
3764 */
3765 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
3766 if (xfer->len > maxsize) {
3767 ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
3768 maxsize);
3769 if (ret)
3770 return ret;
3771 }
3772 }
3773
3774 return 0;
3775}
3776EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
3777
3778
3779/**
3780 * spi_split_transfers_maxwords - split SPI transfers into multiple transfers
3781 * when an individual transfer exceeds a
3782 * certain number of SPI words
3783 * @ctlr: the @spi_controller for this transfer
3784 * @msg: the @spi_message to transform
3785 * @maxwords: the number of words to limit each transfer to
3786 *
3787 * This function allocates resources that are automatically freed during the
3788 * spi message unoptimize phase so this function should only be called from
3789 * optimize_message callbacks.
3790 *
3791 * Return: status of transformation
3792 */
3793int spi_split_transfers_maxwords(struct spi_controller *ctlr,
3794 struct spi_message *msg,
3795 size_t maxwords)
3796{
3797 struct spi_transfer *xfer;
3798
3799 /*
3800 * Iterate over the transfer_list,
3801 * but note that xfer is advanced to the last transfer inserted
3802 * to avoid checking sizes again unnecessarily (also xfer does
3803 * potentially belong to a different list by the time the
3804 * replacement has happened).
3805 */
3806 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
3807 size_t maxsize;
3808 int ret;
3809
3810 maxsize = maxwords * roundup_pow_of_two(BITS_TO_BYTES(xfer->bits_per_word));
3811 if (xfer->len > maxsize) {
3812 ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
3813 maxsize);
3814 if (ret)
3815 return ret;
3816 }
3817 }
3818
3819 return 0;
3820}
3821EXPORT_SYMBOL_GPL(spi_split_transfers_maxwords);
3822
3823/*-------------------------------------------------------------------------*/
3824
3825/*
3826 * Core methods for SPI controller protocol drivers. Some of the
3827 * other core methods are currently defined as inline functions.
3828 */
3829
3830static int __spi_validate_bits_per_word(struct spi_controller *ctlr,
3831 u8 bits_per_word)
3832{
3833 if (ctlr->bits_per_word_mask) {
3834 /* Only 32 bits fit in the mask */
3835 if (bits_per_word > 32)
3836 return -EINVAL;
3837 if (!(ctlr->bits_per_word_mask & SPI_BPW_MASK(bits_per_word)))
3838 return -EINVAL;
3839 }
3840
3841 return 0;
3842}
3843
3844/**
3845 * spi_set_cs_timing - configure CS setup, hold, and inactive delays
3846 * @spi: the device that requires specific CS timing configuration
3847 *
3848 * Return: zero on success, else a negative error code.
3849 */
3850static int spi_set_cs_timing(struct spi_device *spi)
3851{
3852 struct device *parent = spi->controller->dev.parent;
3853 int status = 0;
3854
3855 if (spi->controller->set_cs_timing && !spi_get_csgpiod(spi, 0)) {
3856 if (spi->controller->auto_runtime_pm) {
3857 status = pm_runtime_get_sync(parent);
3858 if (status < 0) {
3859 pm_runtime_put_noidle(parent);
3860 dev_err(&spi->controller->dev, "Failed to power device: %d\n",
3861 status);
3862 return status;
3863 }
3864
3865 status = spi->controller->set_cs_timing(spi);
3866 pm_runtime_mark_last_busy(parent);
3867 pm_runtime_put_autosuspend(parent);
3868 } else {
3869 status = spi->controller->set_cs_timing(spi);
3870 }
3871 }
3872 return status;
3873}
3874
3875/**
3876 * spi_setup - setup SPI mode and clock rate
3877 * @spi: the device whose settings are being modified
3878 * Context: can sleep, and no requests are queued to the device
3879 *
3880 * SPI protocol drivers may need to update the transfer mode if the
3881 * device doesn't work with its default. They may likewise need
3882 * to update clock rates or word sizes from initial values. This function
3883 * changes those settings, and must be called from a context that can sleep.
3884 * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
3885 * effect the next time the device is selected and data is transferred to
3886 * or from it. When this function returns, the SPI device is deselected.
3887 *
3888 * Note that this call will fail if the protocol driver specifies an option
3889 * that the underlying controller or its driver does not support. For
3890 * example, not all hardware supports wire transfers using nine bit words,
3891 * LSB-first wire encoding, or active-high chipselects.
3892 *
3893 * Return: zero on success, else a negative error code.
3894 */
3895int spi_setup(struct spi_device *spi)
3896{
3897 unsigned bad_bits, ugly_bits;
3898 int status;
3899
3900 /*
3901 * Check mode to prevent that any two of DUAL, QUAD and NO_MOSI/MISO
3902 * are set at the same time.
3903 */
3904 if ((hweight_long(spi->mode &
3905 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_NO_TX)) > 1) ||
3906 (hweight_long(spi->mode &
3907 (SPI_RX_DUAL | SPI_RX_QUAD | SPI_NO_RX)) > 1)) {
3908 dev_err(&spi->dev,
3909 "setup: can not select any two of dual, quad and no-rx/tx at the same time\n");
3910 return -EINVAL;
3911 }
3912 /* If it is SPI_3WIRE mode, DUAL and QUAD should be forbidden */
3913 if ((spi->mode & SPI_3WIRE) && (spi->mode &
3914 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL |
3915 SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL)))
3916 return -EINVAL;
3917 /* Check against conflicting MOSI idle configuration */
3918 if ((spi->mode & SPI_MOSI_IDLE_LOW) && (spi->mode & SPI_MOSI_IDLE_HIGH)) {
3919 dev_err(&spi->dev,
3920 "setup: MOSI configured to idle low and high at the same time.\n");
3921 return -EINVAL;
3922 }
3923 /*
3924 * Help drivers fail *cleanly* when they need options
3925 * that aren't supported with their current controller.
3926 * SPI_CS_WORD has a fallback software implementation,
3927 * so it is ignored here.
3928 */
3929 bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD |
3930 SPI_NO_TX | SPI_NO_RX);
3931 ugly_bits = bad_bits &
3932 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL |
3933 SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL);
3934 if (ugly_bits) {
3935 dev_warn(&spi->dev,
3936 "setup: ignoring unsupported mode bits %x\n",
3937 ugly_bits);
3938 spi->mode &= ~ugly_bits;
3939 bad_bits &= ~ugly_bits;
3940 }
3941 if (bad_bits) {
3942 dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
3943 bad_bits);
3944 return -EINVAL;
3945 }
3946
3947 if (!spi->bits_per_word) {
3948 spi->bits_per_word = 8;
3949 } else {
3950 /*
3951 * Some controllers may not support the default 8 bits-per-word
3952 * so only perform the check when this is explicitly provided.
3953 */
3954 status = __spi_validate_bits_per_word(spi->controller,
3955 spi->bits_per_word);
3956 if (status)
3957 return status;
3958 }
3959
3960 if (spi->controller->max_speed_hz &&
3961 (!spi->max_speed_hz ||
3962 spi->max_speed_hz > spi->controller->max_speed_hz))
3963 spi->max_speed_hz = spi->controller->max_speed_hz;
3964
3965 mutex_lock(&spi->controller->io_mutex);
3966
3967 if (spi->controller->setup) {
3968 status = spi->controller->setup(spi);
3969 if (status) {
3970 mutex_unlock(&spi->controller->io_mutex);
3971 dev_err(&spi->controller->dev, "Failed to setup device: %d\n",
3972 status);
3973 return status;
3974 }
3975 }
3976
3977 status = spi_set_cs_timing(spi);
3978 if (status) {
3979 mutex_unlock(&spi->controller->io_mutex);
3980 return status;
3981 }
3982
3983 if (spi->controller->auto_runtime_pm && spi->controller->set_cs) {
3984 status = pm_runtime_resume_and_get(spi->controller->dev.parent);
3985 if (status < 0) {
3986 mutex_unlock(&spi->controller->io_mutex);
3987 dev_err(&spi->controller->dev, "Failed to power device: %d\n",
3988 status);
3989 return status;
3990 }
3991
3992 /*
3993 * We do not want to return positive value from pm_runtime_get,
3994 * there are many instances of devices calling spi_setup() and
3995 * checking for a non-zero return value instead of a negative
3996 * return value.
3997 */
3998 status = 0;
3999
4000 spi_set_cs(spi, false, true);
4001 pm_runtime_mark_last_busy(spi->controller->dev.parent);
4002 pm_runtime_put_autosuspend(spi->controller->dev.parent);
4003 } else {
4004 spi_set_cs(spi, false, true);
4005 }
4006
4007 mutex_unlock(&spi->controller->io_mutex);
4008
4009 if (spi->rt && !spi->controller->rt) {
4010 spi->controller->rt = true;
4011 spi_set_thread_rt(spi->controller);
4012 }
4013
4014 trace_spi_setup(spi, status);
4015
4016 dev_dbg(&spi->dev, "setup mode %lu, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
4017 spi->mode & SPI_MODE_X_MASK,
4018 (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
4019 (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
4020 (spi->mode & SPI_3WIRE) ? "3wire, " : "",
4021 (spi->mode & SPI_LOOP) ? "loopback, " : "",
4022 spi->bits_per_word, spi->max_speed_hz,
4023 status);
4024
4025 return status;
4026}
4027EXPORT_SYMBOL_GPL(spi_setup);
4028
4029static int _spi_xfer_word_delay_update(struct spi_transfer *xfer,
4030 struct spi_device *spi)
4031{
4032 int delay1, delay2;
4033
4034 delay1 = spi_delay_to_ns(&xfer->word_delay, xfer);
4035 if (delay1 < 0)
4036 return delay1;
4037
4038 delay2 = spi_delay_to_ns(&spi->word_delay, xfer);
4039 if (delay2 < 0)
4040 return delay2;
4041
4042 if (delay1 < delay2)
4043 memcpy(&xfer->word_delay, &spi->word_delay,
4044 sizeof(xfer->word_delay));
4045
4046 return 0;
4047}
4048
4049static int __spi_validate(struct spi_device *spi, struct spi_message *message)
4050{
4051 struct spi_controller *ctlr = spi->controller;
4052 struct spi_transfer *xfer;
4053 int w_size;
4054
4055 if (list_empty(&message->transfers))
4056 return -EINVAL;
4057
4058 message->spi = spi;
4059
4060 /*
4061 * Half-duplex links include original MicroWire, and ones with
4062 * only one data pin like SPI_3WIRE (switches direction) or where
4063 * either MOSI or MISO is missing. They can also be caused by
4064 * software limitations.
4065 */
4066 if ((ctlr->flags & SPI_CONTROLLER_HALF_DUPLEX) ||
4067 (spi->mode & SPI_3WIRE)) {
4068 unsigned flags = ctlr->flags;
4069
4070 list_for_each_entry(xfer, &message->transfers, transfer_list) {
4071 if (xfer->rx_buf && xfer->tx_buf)
4072 return -EINVAL;
4073 if ((flags & SPI_CONTROLLER_NO_TX) && xfer->tx_buf)
4074 return -EINVAL;
4075 if ((flags & SPI_CONTROLLER_NO_RX) && xfer->rx_buf)
4076 return -EINVAL;
4077 }
4078 }
4079
4080 /*
4081 * Set transfer bits_per_word and max speed as spi device default if
4082 * it is not set for this transfer.
4083 * Set transfer tx_nbits and rx_nbits as single transfer default
4084 * (SPI_NBITS_SINGLE) if it is not set for this transfer.
4085 * Ensure transfer word_delay is at least as long as that required by
4086 * device itself.
4087 */
4088 message->frame_length = 0;
4089 list_for_each_entry(xfer, &message->transfers, transfer_list) {
4090 xfer->effective_speed_hz = 0;
4091 message->frame_length += xfer->len;
4092 if (!xfer->bits_per_word)
4093 xfer->bits_per_word = spi->bits_per_word;
4094
4095 if (!xfer->speed_hz)
4096 xfer->speed_hz = spi->max_speed_hz;
4097
4098 if (ctlr->max_speed_hz && xfer->speed_hz > ctlr->max_speed_hz)
4099 xfer->speed_hz = ctlr->max_speed_hz;
4100
4101 if (__spi_validate_bits_per_word(ctlr, xfer->bits_per_word))
4102 return -EINVAL;
4103
4104 /*
4105 * SPI transfer length should be multiple of SPI word size
4106 * where SPI word size should be power-of-two multiple.
4107 */
4108 if (xfer->bits_per_word <= 8)
4109 w_size = 1;
4110 else if (xfer->bits_per_word <= 16)
4111 w_size = 2;
4112 else
4113 w_size = 4;
4114
4115 /* No partial transfers accepted */
4116 if (xfer->len % w_size)
4117 return -EINVAL;
4118
4119 if (xfer->speed_hz && ctlr->min_speed_hz &&
4120 xfer->speed_hz < ctlr->min_speed_hz)
4121 return -EINVAL;
4122
4123 if (xfer->tx_buf && !xfer->tx_nbits)
4124 xfer->tx_nbits = SPI_NBITS_SINGLE;
4125 if (xfer->rx_buf && !xfer->rx_nbits)
4126 xfer->rx_nbits = SPI_NBITS_SINGLE;
4127 /*
4128 * Check transfer tx/rx_nbits:
4129 * 1. check the value matches one of single, dual and quad
4130 * 2. check tx/rx_nbits match the mode in spi_device
4131 */
4132 if (xfer->tx_buf) {
4133 if (spi->mode & SPI_NO_TX)
4134 return -EINVAL;
4135 if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
4136 xfer->tx_nbits != SPI_NBITS_DUAL &&
4137 xfer->tx_nbits != SPI_NBITS_QUAD &&
4138 xfer->tx_nbits != SPI_NBITS_OCTAL)
4139 return -EINVAL;
4140 if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
4141 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
4142 return -EINVAL;
4143 if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
4144 !(spi->mode & SPI_TX_QUAD))
4145 return -EINVAL;
4146 }
4147 /* Check transfer rx_nbits */
4148 if (xfer->rx_buf) {
4149 if (spi->mode & SPI_NO_RX)
4150 return -EINVAL;
4151 if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
4152 xfer->rx_nbits != SPI_NBITS_DUAL &&
4153 xfer->rx_nbits != SPI_NBITS_QUAD &&
4154 xfer->rx_nbits != SPI_NBITS_OCTAL)
4155 return -EINVAL;
4156 if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
4157 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
4158 return -EINVAL;
4159 if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
4160 !(spi->mode & SPI_RX_QUAD))
4161 return -EINVAL;
4162 }
4163
4164 if (_spi_xfer_word_delay_update(xfer, spi))
4165 return -EINVAL;
4166 }
4167
4168 message->status = -EINPROGRESS;
4169
4170 return 0;
4171}
4172
4173/*
4174 * spi_split_transfers - generic handling of transfer splitting
4175 * @msg: the message to split
4176 *
4177 * Under certain conditions, a SPI controller may not support arbitrary
4178 * transfer sizes or other features required by a peripheral. This function
4179 * will split the transfers in the message into smaller transfers that are
4180 * supported by the controller.
4181 *
4182 * Controllers with special requirements not covered here can also split
4183 * transfers in the optimize_message() callback.
4184 *
4185 * Context: can sleep
4186 * Return: zero on success, else a negative error code
4187 */
4188static int spi_split_transfers(struct spi_message *msg)
4189{
4190 struct spi_controller *ctlr = msg->spi->controller;
4191 struct spi_transfer *xfer;
4192 int ret;
4193
4194 /*
4195 * If an SPI controller does not support toggling the CS line on each
4196 * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO
4197 * for the CS line, we can emulate the CS-per-word hardware function by
4198 * splitting transfers into one-word transfers and ensuring that
4199 * cs_change is set for each transfer.
4200 */
4201 if ((msg->spi->mode & SPI_CS_WORD) &&
4202 (!(ctlr->mode_bits & SPI_CS_WORD) || spi_is_csgpiod(msg->spi))) {
4203 ret = spi_split_transfers_maxwords(ctlr, msg, 1);
4204 if (ret)
4205 return ret;
4206
4207 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
4208 /* Don't change cs_change on the last entry in the list */
4209 if (list_is_last(&xfer->transfer_list, &msg->transfers))
4210 break;
4211
4212 xfer->cs_change = 1;
4213 }
4214 } else {
4215 ret = spi_split_transfers_maxsize(ctlr, msg,
4216 spi_max_transfer_size(msg->spi));
4217 if (ret)
4218 return ret;
4219 }
4220
4221 return 0;
4222}
4223
4224/*
4225 * __spi_optimize_message - shared implementation for spi_optimize_message()
4226 * and spi_maybe_optimize_message()
4227 * @spi: the device that will be used for the message
4228 * @msg: the message to optimize
4229 *
4230 * Peripheral drivers will call spi_optimize_message() and the spi core will
4231 * call spi_maybe_optimize_message() instead of calling this directly.
4232 *
4233 * It is not valid to call this on a message that has already been optimized.
4234 *
4235 * Return: zero on success, else a negative error code
4236 */
4237static int __spi_optimize_message(struct spi_device *spi,
4238 struct spi_message *msg)
4239{
4240 struct spi_controller *ctlr = spi->controller;
4241 int ret;
4242
4243 ret = __spi_validate(spi, msg);
4244 if (ret)
4245 return ret;
4246
4247 ret = spi_split_transfers(msg);
4248 if (ret)
4249 return ret;
4250
4251 if (ctlr->optimize_message) {
4252 ret = ctlr->optimize_message(msg);
4253 if (ret) {
4254 spi_res_release(ctlr, msg);
4255 return ret;
4256 }
4257 }
4258
4259 msg->optimized = true;
4260
4261 return 0;
4262}
4263
4264/*
4265 * spi_maybe_optimize_message - optimize message if it isn't already pre-optimized
4266 * @spi: the device that will be used for the message
4267 * @msg: the message to optimize
4268 * Return: zero on success, else a negative error code
4269 */
4270static int spi_maybe_optimize_message(struct spi_device *spi,
4271 struct spi_message *msg)
4272{
4273 if (spi->controller->defer_optimize_message) {
4274 msg->spi = spi;
4275 return 0;
4276 }
4277
4278 if (msg->pre_optimized)
4279 return 0;
4280
4281 return __spi_optimize_message(spi, msg);
4282}
4283
4284/**
4285 * spi_optimize_message - do any one-time validation and setup for a SPI message
4286 * @spi: the device that will be used for the message
4287 * @msg: the message to optimize
4288 *
4289 * Peripheral drivers that reuse the same message repeatedly may call this to
4290 * perform as much message prep as possible once, rather than repeating it each
4291 * time a message transfer is performed to improve throughput and reduce CPU
4292 * usage.
4293 *
4294 * Once a message has been optimized, it cannot be modified with the exception
4295 * of updating the contents of any xfer->tx_buf (the pointer can't be changed,
4296 * only the data in the memory it points to).
4297 *
4298 * Calls to this function must be balanced with calls to spi_unoptimize_message()
4299 * to avoid leaking resources.
4300 *
4301 * Context: can sleep
4302 * Return: zero on success, else a negative error code
4303 */
4304int spi_optimize_message(struct spi_device *spi, struct spi_message *msg)
4305{
4306 int ret;
4307
4308 /*
4309 * Pre-optimization is not supported and optimization is deferred e.g.
4310 * when using spi-mux.
4311 */
4312 if (spi->controller->defer_optimize_message)
4313 return 0;
4314
4315 ret = __spi_optimize_message(spi, msg);
4316 if (ret)
4317 return ret;
4318
4319 /*
4320 * This flag indicates that the peripheral driver called spi_optimize_message()
4321 * and therefore we shouldn't unoptimize message automatically when finalizing
4322 * the message but rather wait until spi_unoptimize_message() is called
4323 * by the peripheral driver.
4324 */
4325 msg->pre_optimized = true;
4326
4327 return 0;
4328}
4329EXPORT_SYMBOL_GPL(spi_optimize_message);
4330
4331/**
4332 * spi_unoptimize_message - releases any resources allocated by spi_optimize_message()
4333 * @msg: the message to unoptimize
4334 *
4335 * Calls to this function must be balanced with calls to spi_optimize_message().
4336 *
4337 * Context: can sleep
4338 */
4339void spi_unoptimize_message(struct spi_message *msg)
4340{
4341 if (msg->spi->controller->defer_optimize_message)
4342 return;
4343
4344 __spi_unoptimize_message(msg);
4345 msg->pre_optimized = false;
4346}
4347EXPORT_SYMBOL_GPL(spi_unoptimize_message);
4348
4349static int __spi_async(struct spi_device *spi, struct spi_message *message)
4350{
4351 struct spi_controller *ctlr = spi->controller;
4352 struct spi_transfer *xfer;
4353
4354 /*
4355 * Some controllers do not support doing regular SPI transfers. Return
4356 * ENOTSUPP when this is the case.
4357 */
4358 if (!ctlr->transfer)
4359 return -ENOTSUPP;
4360
4361 SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_async);
4362 SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_async);
4363
4364 trace_spi_message_submit(message);
4365
4366 if (!ctlr->ptp_sts_supported) {
4367 list_for_each_entry(xfer, &message->transfers, transfer_list) {
4368 xfer->ptp_sts_word_pre = 0;
4369 ptp_read_system_prets(xfer->ptp_sts);
4370 }
4371 }
4372
4373 return ctlr->transfer(spi, message);
4374}
4375
4376static void devm_spi_unoptimize_message(void *msg)
4377{
4378 spi_unoptimize_message(msg);
4379}
4380
4381/**
4382 * devm_spi_optimize_message - managed version of spi_optimize_message()
4383 * @dev: the device that manages @msg (usually @spi->dev)
4384 * @spi: the device that will be used for the message
4385 * @msg: the message to optimize
4386 * Return: zero on success, else a negative error code
4387 *
4388 * spi_unoptimize_message() will automatically be called when the device is
4389 * removed.
4390 */
4391int devm_spi_optimize_message(struct device *dev, struct spi_device *spi,
4392 struct spi_message *msg)
4393{
4394 int ret;
4395
4396 ret = spi_optimize_message(spi, msg);
4397 if (ret)
4398 return ret;
4399
4400 return devm_add_action_or_reset(dev, devm_spi_unoptimize_message, msg);
4401}
4402EXPORT_SYMBOL_GPL(devm_spi_optimize_message);
4403
4404/**
4405 * spi_async - asynchronous SPI transfer
4406 * @spi: device with which data will be exchanged
4407 * @message: describes the data transfers, including completion callback
4408 * Context: any (IRQs may be blocked, etc)
4409 *
4410 * This call may be used in_irq and other contexts which can't sleep,
4411 * as well as from task contexts which can sleep.
4412 *
4413 * The completion callback is invoked in a context which can't sleep.
4414 * Before that invocation, the value of message->status is undefined.
4415 * When the callback is issued, message->status holds either zero (to
4416 * indicate complete success) or a negative error code. After that
4417 * callback returns, the driver which issued the transfer request may
4418 * deallocate the associated memory; it's no longer in use by any SPI
4419 * core or controller driver code.
4420 *
4421 * Note that although all messages to a spi_device are handled in
4422 * FIFO order, messages may go to different devices in other orders.
4423 * Some device might be higher priority, or have various "hard" access
4424 * time requirements, for example.
4425 *
4426 * On detection of any fault during the transfer, processing of
4427 * the entire message is aborted, and the device is deselected.
4428 * Until returning from the associated message completion callback,
4429 * no other spi_message queued to that device will be processed.
4430 * (This rule applies equally to all the synchronous transfer calls,
4431 * which are wrappers around this core asynchronous primitive.)
4432 *
4433 * Return: zero on success, else a negative error code.
4434 */
4435int spi_async(struct spi_device *spi, struct spi_message *message)
4436{
4437 struct spi_controller *ctlr = spi->controller;
4438 int ret;
4439 unsigned long flags;
4440
4441 ret = spi_maybe_optimize_message(spi, message);
4442 if (ret)
4443 return ret;
4444
4445 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
4446
4447 if (ctlr->bus_lock_flag)
4448 ret = -EBUSY;
4449 else
4450 ret = __spi_async(spi, message);
4451
4452 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
4453
4454 return ret;
4455}
4456EXPORT_SYMBOL_GPL(spi_async);
4457
4458static void __spi_transfer_message_noqueue(struct spi_controller *ctlr, struct spi_message *msg)
4459{
4460 bool was_busy;
4461 int ret;
4462
4463 mutex_lock(&ctlr->io_mutex);
4464
4465 was_busy = ctlr->busy;
4466
4467 ctlr->cur_msg = msg;
4468 ret = __spi_pump_transfer_message(ctlr, msg, was_busy);
4469 if (ret)
4470 dev_err(&ctlr->dev, "noqueue transfer failed\n");
4471 ctlr->cur_msg = NULL;
4472 ctlr->fallback = false;
4473
4474 if (!was_busy) {
4475 kfree(ctlr->dummy_rx);
4476 ctlr->dummy_rx = NULL;
4477 kfree(ctlr->dummy_tx);
4478 ctlr->dummy_tx = NULL;
4479 if (ctlr->unprepare_transfer_hardware &&
4480 ctlr->unprepare_transfer_hardware(ctlr))
4481 dev_err(&ctlr->dev,
4482 "failed to unprepare transfer hardware\n");
4483 spi_idle_runtime_pm(ctlr);
4484 }
4485
4486 mutex_unlock(&ctlr->io_mutex);
4487}
4488
4489/*-------------------------------------------------------------------------*/
4490
4491/*
4492 * Utility methods for SPI protocol drivers, layered on
4493 * top of the core. Some other utility methods are defined as
4494 * inline functions.
4495 */
4496
4497static void spi_complete(void *arg)
4498{
4499 complete(arg);
4500}
4501
4502static int __spi_sync(struct spi_device *spi, struct spi_message *message)
4503{
4504 DECLARE_COMPLETION_ONSTACK(done);
4505 unsigned long flags;
4506 int status;
4507 struct spi_controller *ctlr = spi->controller;
4508
4509 if (__spi_check_suspended(ctlr)) {
4510 dev_warn_once(&spi->dev, "Attempted to sync while suspend\n");
4511 return -ESHUTDOWN;
4512 }
4513
4514 status = spi_maybe_optimize_message(spi, message);
4515 if (status)
4516 return status;
4517
4518 SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_sync);
4519 SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_sync);
4520
4521 /*
4522 * Checking queue_empty here only guarantees async/sync message
4523 * ordering when coming from the same context. It does not need to
4524 * guard against reentrancy from a different context. The io_mutex
4525 * will catch those cases.
4526 */
4527 if (READ_ONCE(ctlr->queue_empty) && !ctlr->must_async) {
4528 message->actual_length = 0;
4529 message->status = -EINPROGRESS;
4530
4531 trace_spi_message_submit(message);
4532
4533 SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_sync_immediate);
4534 SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_sync_immediate);
4535
4536 __spi_transfer_message_noqueue(ctlr, message);
4537
4538 return message->status;
4539 }
4540
4541 /*
4542 * There are messages in the async queue that could have originated
4543 * from the same context, so we need to preserve ordering.
4544 * Therefor we send the message to the async queue and wait until they
4545 * are completed.
4546 */
4547 message->complete = spi_complete;
4548 message->context = &done;
4549
4550 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
4551 status = __spi_async(spi, message);
4552 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
4553
4554 if (status == 0) {
4555 wait_for_completion(&done);
4556 status = message->status;
4557 }
4558 message->complete = NULL;
4559 message->context = NULL;
4560
4561 return status;
4562}
4563
4564/**
4565 * spi_sync - blocking/synchronous SPI data transfers
4566 * @spi: device with which data will be exchanged
4567 * @message: describes the data transfers
4568 * Context: can sleep
4569 *
4570 * This call may only be used from a context that may sleep. The sleep
4571 * is non-interruptible, and has no timeout. Low-overhead controller
4572 * drivers may DMA directly into and out of the message buffers.
4573 *
4574 * Note that the SPI device's chip select is active during the message,
4575 * and then is normally disabled between messages. Drivers for some
4576 * frequently-used devices may want to minimize costs of selecting a chip,
4577 * by leaving it selected in anticipation that the next message will go
4578 * to the same chip. (That may increase power usage.)
4579 *
4580 * Also, the caller is guaranteeing that the memory associated with the
4581 * message will not be freed before this call returns.
4582 *
4583 * Return: zero on success, else a negative error code.
4584 */
4585int spi_sync(struct spi_device *spi, struct spi_message *message)
4586{
4587 int ret;
4588
4589 mutex_lock(&spi->controller->bus_lock_mutex);
4590 ret = __spi_sync(spi, message);
4591 mutex_unlock(&spi->controller->bus_lock_mutex);
4592
4593 return ret;
4594}
4595EXPORT_SYMBOL_GPL(spi_sync);
4596
4597/**
4598 * spi_sync_locked - version of spi_sync with exclusive bus usage
4599 * @spi: device with which data will be exchanged
4600 * @message: describes the data transfers
4601 * Context: can sleep
4602 *
4603 * This call may only be used from a context that may sleep. The sleep
4604 * is non-interruptible, and has no timeout. Low-overhead controller
4605 * drivers may DMA directly into and out of the message buffers.
4606 *
4607 * This call should be used by drivers that require exclusive access to the
4608 * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
4609 * be released by a spi_bus_unlock call when the exclusive access is over.
4610 *
4611 * Return: zero on success, else a negative error code.
4612 */
4613int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
4614{
4615 return __spi_sync(spi, message);
4616}
4617EXPORT_SYMBOL_GPL(spi_sync_locked);
4618
4619/**
4620 * spi_bus_lock - obtain a lock for exclusive SPI bus usage
4621 * @ctlr: SPI bus master that should be locked for exclusive bus access
4622 * Context: can sleep
4623 *
4624 * This call may only be used from a context that may sleep. The sleep
4625 * is non-interruptible, and has no timeout.
4626 *
4627 * This call should be used by drivers that require exclusive access to the
4628 * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
4629 * exclusive access is over. Data transfer must be done by spi_sync_locked
4630 * and spi_async_locked calls when the SPI bus lock is held.
4631 *
4632 * Return: always zero.
4633 */
4634int spi_bus_lock(struct spi_controller *ctlr)
4635{
4636 unsigned long flags;
4637
4638 mutex_lock(&ctlr->bus_lock_mutex);
4639
4640 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
4641 ctlr->bus_lock_flag = 1;
4642 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
4643
4644 /* Mutex remains locked until spi_bus_unlock() is called */
4645
4646 return 0;
4647}
4648EXPORT_SYMBOL_GPL(spi_bus_lock);
4649
4650/**
4651 * spi_bus_unlock - release the lock for exclusive SPI bus usage
4652 * @ctlr: SPI bus master that was locked for exclusive bus access
4653 * Context: can sleep
4654 *
4655 * This call may only be used from a context that may sleep. The sleep
4656 * is non-interruptible, and has no timeout.
4657 *
4658 * This call releases an SPI bus lock previously obtained by an spi_bus_lock
4659 * call.
4660 *
4661 * Return: always zero.
4662 */
4663int spi_bus_unlock(struct spi_controller *ctlr)
4664{
4665 ctlr->bus_lock_flag = 0;
4666
4667 mutex_unlock(&ctlr->bus_lock_mutex);
4668
4669 return 0;
4670}
4671EXPORT_SYMBOL_GPL(spi_bus_unlock);
4672
4673/* Portable code must never pass more than 32 bytes */
4674#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
4675
4676static u8 *buf;
4677
4678/**
4679 * spi_write_then_read - SPI synchronous write followed by read
4680 * @spi: device with which data will be exchanged
4681 * @txbuf: data to be written (need not be DMA-safe)
4682 * @n_tx: size of txbuf, in bytes
4683 * @rxbuf: buffer into which data will be read (need not be DMA-safe)
4684 * @n_rx: size of rxbuf, in bytes
4685 * Context: can sleep
4686 *
4687 * This performs a half duplex MicroWire style transaction with the
4688 * device, sending txbuf and then reading rxbuf. The return value
4689 * is zero for success, else a negative errno status code.
4690 * This call may only be used from a context that may sleep.
4691 *
4692 * Parameters to this routine are always copied using a small buffer.
4693 * Performance-sensitive or bulk transfer code should instead use
4694 * spi_{async,sync}() calls with DMA-safe buffers.
4695 *
4696 * Return: zero on success, else a negative error code.
4697 */
4698int spi_write_then_read(struct spi_device *spi,
4699 const void *txbuf, unsigned n_tx,
4700 void *rxbuf, unsigned n_rx)
4701{
4702 static DEFINE_MUTEX(lock);
4703
4704 int status;
4705 struct spi_message message;
4706 struct spi_transfer x[2];
4707 u8 *local_buf;
4708
4709 /*
4710 * Use preallocated DMA-safe buffer if we can. We can't avoid
4711 * copying here, (as a pure convenience thing), but we can
4712 * keep heap costs out of the hot path unless someone else is
4713 * using the pre-allocated buffer or the transfer is too large.
4714 */
4715 if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
4716 local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
4717 GFP_KERNEL | GFP_DMA);
4718 if (!local_buf)
4719 return -ENOMEM;
4720 } else {
4721 local_buf = buf;
4722 }
4723
4724 spi_message_init(&message);
4725 memset(x, 0, sizeof(x));
4726 if (n_tx) {
4727 x[0].len = n_tx;
4728 spi_message_add_tail(&x[0], &message);
4729 }
4730 if (n_rx) {
4731 x[1].len = n_rx;
4732 spi_message_add_tail(&x[1], &message);
4733 }
4734
4735 memcpy(local_buf, txbuf, n_tx);
4736 x[0].tx_buf = local_buf;
4737 x[1].rx_buf = local_buf + n_tx;
4738
4739 /* Do the I/O */
4740 status = spi_sync(spi, &message);
4741 if (status == 0)
4742 memcpy(rxbuf, x[1].rx_buf, n_rx);
4743
4744 if (x[0].tx_buf == buf)
4745 mutex_unlock(&lock);
4746 else
4747 kfree(local_buf);
4748
4749 return status;
4750}
4751EXPORT_SYMBOL_GPL(spi_write_then_read);
4752
4753/*-------------------------------------------------------------------------*/
4754
4755#if IS_ENABLED(CONFIG_OF_DYNAMIC)
4756/* Must call put_device() when done with returned spi_device device */
4757static struct spi_device *of_find_spi_device_by_node(struct device_node *node)
4758{
4759 struct device *dev = bus_find_device_by_of_node(&spi_bus_type, node);
4760
4761 return dev ? to_spi_device(dev) : NULL;
4762}
4763
4764/* The spi controllers are not using spi_bus, so we find it with another way */
4765static struct spi_controller *of_find_spi_controller_by_node(struct device_node *node)
4766{
4767 struct device *dev;
4768
4769 dev = class_find_device_by_of_node(&spi_master_class, node);
4770 if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
4771 dev = class_find_device_by_of_node(&spi_slave_class, node);
4772 if (!dev)
4773 return NULL;
4774
4775 /* Reference got in class_find_device */
4776 return container_of(dev, struct spi_controller, dev);
4777}
4778
4779static int of_spi_notify(struct notifier_block *nb, unsigned long action,
4780 void *arg)
4781{
4782 struct of_reconfig_data *rd = arg;
4783 struct spi_controller *ctlr;
4784 struct spi_device *spi;
4785
4786 switch (of_reconfig_get_state_change(action, arg)) {
4787 case OF_RECONFIG_CHANGE_ADD:
4788 ctlr = of_find_spi_controller_by_node(rd->dn->parent);
4789 if (ctlr == NULL)
4790 return NOTIFY_OK; /* Not for us */
4791
4792 if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
4793 put_device(&ctlr->dev);
4794 return NOTIFY_OK;
4795 }
4796
4797 /*
4798 * Clear the flag before adding the device so that fw_devlink
4799 * doesn't skip adding consumers to this device.
4800 */
4801 rd->dn->fwnode.flags &= ~FWNODE_FLAG_NOT_DEVICE;
4802 spi = of_register_spi_device(ctlr, rd->dn);
4803 put_device(&ctlr->dev);
4804
4805 if (IS_ERR(spi)) {
4806 pr_err("%s: failed to create for '%pOF'\n",
4807 __func__, rd->dn);
4808 of_node_clear_flag(rd->dn, OF_POPULATED);
4809 return notifier_from_errno(PTR_ERR(spi));
4810 }
4811 break;
4812
4813 case OF_RECONFIG_CHANGE_REMOVE:
4814 /* Already depopulated? */
4815 if (!of_node_check_flag(rd->dn, OF_POPULATED))
4816 return NOTIFY_OK;
4817
4818 /* Find our device by node */
4819 spi = of_find_spi_device_by_node(rd->dn);
4820 if (spi == NULL)
4821 return NOTIFY_OK; /* No? not meant for us */
4822
4823 /* Unregister takes one ref away */
4824 spi_unregister_device(spi);
4825
4826 /* And put the reference of the find */
4827 put_device(&spi->dev);
4828 break;
4829 }
4830
4831 return NOTIFY_OK;
4832}
4833
4834static struct notifier_block spi_of_notifier = {
4835 .notifier_call = of_spi_notify,
4836};
4837#else /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
4838extern struct notifier_block spi_of_notifier;
4839#endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
4840
4841#if IS_ENABLED(CONFIG_ACPI)
4842static int spi_acpi_controller_match(struct device *dev, const void *data)
4843{
4844 return ACPI_COMPANION(dev->parent) == data;
4845}
4846
4847struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev)
4848{
4849 struct device *dev;
4850
4851 dev = class_find_device(&spi_master_class, NULL, adev,
4852 spi_acpi_controller_match);
4853 if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
4854 dev = class_find_device(&spi_slave_class, NULL, adev,
4855 spi_acpi_controller_match);
4856 if (!dev)
4857 return NULL;
4858
4859 return container_of(dev, struct spi_controller, dev);
4860}
4861EXPORT_SYMBOL_GPL(acpi_spi_find_controller_by_adev);
4862
4863static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev)
4864{
4865 struct device *dev;
4866
4867 dev = bus_find_device_by_acpi_dev(&spi_bus_type, adev);
4868 return to_spi_device(dev);
4869}
4870
4871static int acpi_spi_notify(struct notifier_block *nb, unsigned long value,
4872 void *arg)
4873{
4874 struct acpi_device *adev = arg;
4875 struct spi_controller *ctlr;
4876 struct spi_device *spi;
4877
4878 switch (value) {
4879 case ACPI_RECONFIG_DEVICE_ADD:
4880 ctlr = acpi_spi_find_controller_by_adev(acpi_dev_parent(adev));
4881 if (!ctlr)
4882 break;
4883
4884 acpi_register_spi_device(ctlr, adev);
4885 put_device(&ctlr->dev);
4886 break;
4887 case ACPI_RECONFIG_DEVICE_REMOVE:
4888 if (!acpi_device_enumerated(adev))
4889 break;
4890
4891 spi = acpi_spi_find_device_by_adev(adev);
4892 if (!spi)
4893 break;
4894
4895 spi_unregister_device(spi);
4896 put_device(&spi->dev);
4897 break;
4898 }
4899
4900 return NOTIFY_OK;
4901}
4902
4903static struct notifier_block spi_acpi_notifier = {
4904 .notifier_call = acpi_spi_notify,
4905};
4906#else
4907extern struct notifier_block spi_acpi_notifier;
4908#endif
4909
4910static int __init spi_init(void)
4911{
4912 int status;
4913
4914 buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
4915 if (!buf) {
4916 status = -ENOMEM;
4917 goto err0;
4918 }
4919
4920 status = bus_register(&spi_bus_type);
4921 if (status < 0)
4922 goto err1;
4923
4924 status = class_register(&spi_master_class);
4925 if (status < 0)
4926 goto err2;
4927
4928 if (IS_ENABLED(CONFIG_SPI_SLAVE)) {
4929 status = class_register(&spi_slave_class);
4930 if (status < 0)
4931 goto err3;
4932 }
4933
4934 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
4935 WARN_ON(of_reconfig_notifier_register(&spi_of_notifier));
4936 if (IS_ENABLED(CONFIG_ACPI))
4937 WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier));
4938
4939 return 0;
4940
4941err3:
4942 class_unregister(&spi_master_class);
4943err2:
4944 bus_unregister(&spi_bus_type);
4945err1:
4946 kfree(buf);
4947 buf = NULL;
4948err0:
4949 return status;
4950}
4951
4952/*
4953 * A board_info is normally registered in arch_initcall(),
4954 * but even essential drivers wait till later.
4955 *
4956 * REVISIT only boardinfo really needs static linking. The rest (device and
4957 * driver registration) _could_ be dynamically linked (modular) ... Costs
4958 * include needing to have boardinfo data structures be much more public.
4959 */
4960postcore_initcall(spi_init);
1/*
2 * SPI init/core code
3 *
4 * Copyright (C) 2005 David Brownell
5 * Copyright (C) 2008 Secret Lab Technologies Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 */
17
18#include <linux/kernel.h>
19#include <linux/device.h>
20#include <linux/init.h>
21#include <linux/cache.h>
22#include <linux/dma-mapping.h>
23#include <linux/dmaengine.h>
24#include <linux/mutex.h>
25#include <linux/of_device.h>
26#include <linux/of_irq.h>
27#include <linux/clk/clk-conf.h>
28#include <linux/slab.h>
29#include <linux/mod_devicetable.h>
30#include <linux/spi/spi.h>
31#include <linux/of_gpio.h>
32#include <linux/pm_runtime.h>
33#include <linux/pm_domain.h>
34#include <linux/property.h>
35#include <linux/export.h>
36#include <linux/sched/rt.h>
37#include <uapi/linux/sched/types.h>
38#include <linux/delay.h>
39#include <linux/kthread.h>
40#include <linux/ioport.h>
41#include <linux/acpi.h>
42#include <linux/highmem.h>
43#include <linux/idr.h>
44#include <linux/platform_data/x86/apple.h>
45
46#define CREATE_TRACE_POINTS
47#include <trace/events/spi.h>
48
49static DEFINE_IDR(spi_master_idr);
50
51static void spidev_release(struct device *dev)
52{
53 struct spi_device *spi = to_spi_device(dev);
54
55 /* spi controllers may cleanup for released devices */
56 if (spi->controller->cleanup)
57 spi->controller->cleanup(spi);
58
59 spi_controller_put(spi->controller);
60 kfree(spi);
61}
62
63static ssize_t
64modalias_show(struct device *dev, struct device_attribute *a, char *buf)
65{
66 const struct spi_device *spi = to_spi_device(dev);
67 int len;
68
69 len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
70 if (len != -ENODEV)
71 return len;
72
73 return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
74}
75static DEVICE_ATTR_RO(modalias);
76
77#define SPI_STATISTICS_ATTRS(field, file) \
78static ssize_t spi_controller_##field##_show(struct device *dev, \
79 struct device_attribute *attr, \
80 char *buf) \
81{ \
82 struct spi_controller *ctlr = container_of(dev, \
83 struct spi_controller, dev); \
84 return spi_statistics_##field##_show(&ctlr->statistics, buf); \
85} \
86static struct device_attribute dev_attr_spi_controller_##field = { \
87 .attr = { .name = file, .mode = 0444 }, \
88 .show = spi_controller_##field##_show, \
89}; \
90static ssize_t spi_device_##field##_show(struct device *dev, \
91 struct device_attribute *attr, \
92 char *buf) \
93{ \
94 struct spi_device *spi = to_spi_device(dev); \
95 return spi_statistics_##field##_show(&spi->statistics, buf); \
96} \
97static struct device_attribute dev_attr_spi_device_##field = { \
98 .attr = { .name = file, .mode = 0444 }, \
99 .show = spi_device_##field##_show, \
100}
101
102#define SPI_STATISTICS_SHOW_NAME(name, file, field, format_string) \
103static ssize_t spi_statistics_##name##_show(struct spi_statistics *stat, \
104 char *buf) \
105{ \
106 unsigned long flags; \
107 ssize_t len; \
108 spin_lock_irqsave(&stat->lock, flags); \
109 len = sprintf(buf, format_string, stat->field); \
110 spin_unlock_irqrestore(&stat->lock, flags); \
111 return len; \
112} \
113SPI_STATISTICS_ATTRS(name, file)
114
115#define SPI_STATISTICS_SHOW(field, format_string) \
116 SPI_STATISTICS_SHOW_NAME(field, __stringify(field), \
117 field, format_string)
118
119SPI_STATISTICS_SHOW(messages, "%lu");
120SPI_STATISTICS_SHOW(transfers, "%lu");
121SPI_STATISTICS_SHOW(errors, "%lu");
122SPI_STATISTICS_SHOW(timedout, "%lu");
123
124SPI_STATISTICS_SHOW(spi_sync, "%lu");
125SPI_STATISTICS_SHOW(spi_sync_immediate, "%lu");
126SPI_STATISTICS_SHOW(spi_async, "%lu");
127
128SPI_STATISTICS_SHOW(bytes, "%llu");
129SPI_STATISTICS_SHOW(bytes_rx, "%llu");
130SPI_STATISTICS_SHOW(bytes_tx, "%llu");
131
132#define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \
133 SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \
134 "transfer_bytes_histo_" number, \
135 transfer_bytes_histo[index], "%lu")
136SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1");
137SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3");
138SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7");
139SPI_STATISTICS_TRANSFER_BYTES_HISTO(3, "8-15");
140SPI_STATISTICS_TRANSFER_BYTES_HISTO(4, "16-31");
141SPI_STATISTICS_TRANSFER_BYTES_HISTO(5, "32-63");
142SPI_STATISTICS_TRANSFER_BYTES_HISTO(6, "64-127");
143SPI_STATISTICS_TRANSFER_BYTES_HISTO(7, "128-255");
144SPI_STATISTICS_TRANSFER_BYTES_HISTO(8, "256-511");
145SPI_STATISTICS_TRANSFER_BYTES_HISTO(9, "512-1023");
146SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047");
147SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095");
148SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191");
149SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383");
150SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
151SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
152SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
153
154SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
155
156static struct attribute *spi_dev_attrs[] = {
157 &dev_attr_modalias.attr,
158 NULL,
159};
160
161static const struct attribute_group spi_dev_group = {
162 .attrs = spi_dev_attrs,
163};
164
165static struct attribute *spi_device_statistics_attrs[] = {
166 &dev_attr_spi_device_messages.attr,
167 &dev_attr_spi_device_transfers.attr,
168 &dev_attr_spi_device_errors.attr,
169 &dev_attr_spi_device_timedout.attr,
170 &dev_attr_spi_device_spi_sync.attr,
171 &dev_attr_spi_device_spi_sync_immediate.attr,
172 &dev_attr_spi_device_spi_async.attr,
173 &dev_attr_spi_device_bytes.attr,
174 &dev_attr_spi_device_bytes_rx.attr,
175 &dev_attr_spi_device_bytes_tx.attr,
176 &dev_attr_spi_device_transfer_bytes_histo0.attr,
177 &dev_attr_spi_device_transfer_bytes_histo1.attr,
178 &dev_attr_spi_device_transfer_bytes_histo2.attr,
179 &dev_attr_spi_device_transfer_bytes_histo3.attr,
180 &dev_attr_spi_device_transfer_bytes_histo4.attr,
181 &dev_attr_spi_device_transfer_bytes_histo5.attr,
182 &dev_attr_spi_device_transfer_bytes_histo6.attr,
183 &dev_attr_spi_device_transfer_bytes_histo7.attr,
184 &dev_attr_spi_device_transfer_bytes_histo8.attr,
185 &dev_attr_spi_device_transfer_bytes_histo9.attr,
186 &dev_attr_spi_device_transfer_bytes_histo10.attr,
187 &dev_attr_spi_device_transfer_bytes_histo11.attr,
188 &dev_attr_spi_device_transfer_bytes_histo12.attr,
189 &dev_attr_spi_device_transfer_bytes_histo13.attr,
190 &dev_attr_spi_device_transfer_bytes_histo14.attr,
191 &dev_attr_spi_device_transfer_bytes_histo15.attr,
192 &dev_attr_spi_device_transfer_bytes_histo16.attr,
193 &dev_attr_spi_device_transfers_split_maxsize.attr,
194 NULL,
195};
196
197static const struct attribute_group spi_device_statistics_group = {
198 .name = "statistics",
199 .attrs = spi_device_statistics_attrs,
200};
201
202static const struct attribute_group *spi_dev_groups[] = {
203 &spi_dev_group,
204 &spi_device_statistics_group,
205 NULL,
206};
207
208static struct attribute *spi_controller_statistics_attrs[] = {
209 &dev_attr_spi_controller_messages.attr,
210 &dev_attr_spi_controller_transfers.attr,
211 &dev_attr_spi_controller_errors.attr,
212 &dev_attr_spi_controller_timedout.attr,
213 &dev_attr_spi_controller_spi_sync.attr,
214 &dev_attr_spi_controller_spi_sync_immediate.attr,
215 &dev_attr_spi_controller_spi_async.attr,
216 &dev_attr_spi_controller_bytes.attr,
217 &dev_attr_spi_controller_bytes_rx.attr,
218 &dev_attr_spi_controller_bytes_tx.attr,
219 &dev_attr_spi_controller_transfer_bytes_histo0.attr,
220 &dev_attr_spi_controller_transfer_bytes_histo1.attr,
221 &dev_attr_spi_controller_transfer_bytes_histo2.attr,
222 &dev_attr_spi_controller_transfer_bytes_histo3.attr,
223 &dev_attr_spi_controller_transfer_bytes_histo4.attr,
224 &dev_attr_spi_controller_transfer_bytes_histo5.attr,
225 &dev_attr_spi_controller_transfer_bytes_histo6.attr,
226 &dev_attr_spi_controller_transfer_bytes_histo7.attr,
227 &dev_attr_spi_controller_transfer_bytes_histo8.attr,
228 &dev_attr_spi_controller_transfer_bytes_histo9.attr,
229 &dev_attr_spi_controller_transfer_bytes_histo10.attr,
230 &dev_attr_spi_controller_transfer_bytes_histo11.attr,
231 &dev_attr_spi_controller_transfer_bytes_histo12.attr,
232 &dev_attr_spi_controller_transfer_bytes_histo13.attr,
233 &dev_attr_spi_controller_transfer_bytes_histo14.attr,
234 &dev_attr_spi_controller_transfer_bytes_histo15.attr,
235 &dev_attr_spi_controller_transfer_bytes_histo16.attr,
236 &dev_attr_spi_controller_transfers_split_maxsize.attr,
237 NULL,
238};
239
240static const struct attribute_group spi_controller_statistics_group = {
241 .name = "statistics",
242 .attrs = spi_controller_statistics_attrs,
243};
244
245static const struct attribute_group *spi_master_groups[] = {
246 &spi_controller_statistics_group,
247 NULL,
248};
249
250void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
251 struct spi_transfer *xfer,
252 struct spi_controller *ctlr)
253{
254 unsigned long flags;
255 int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
256
257 if (l2len < 0)
258 l2len = 0;
259
260 spin_lock_irqsave(&stats->lock, flags);
261
262 stats->transfers++;
263 stats->transfer_bytes_histo[l2len]++;
264
265 stats->bytes += xfer->len;
266 if ((xfer->tx_buf) &&
267 (xfer->tx_buf != ctlr->dummy_tx))
268 stats->bytes_tx += xfer->len;
269 if ((xfer->rx_buf) &&
270 (xfer->rx_buf != ctlr->dummy_rx))
271 stats->bytes_rx += xfer->len;
272
273 spin_unlock_irqrestore(&stats->lock, flags);
274}
275EXPORT_SYMBOL_GPL(spi_statistics_add_transfer_stats);
276
277/* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
278 * and the sysfs version makes coldplug work too.
279 */
280
281static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
282 const struct spi_device *sdev)
283{
284 while (id->name[0]) {
285 if (!strcmp(sdev->modalias, id->name))
286 return id;
287 id++;
288 }
289 return NULL;
290}
291
292const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
293{
294 const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
295
296 return spi_match_id(sdrv->id_table, sdev);
297}
298EXPORT_SYMBOL_GPL(spi_get_device_id);
299
300static int spi_match_device(struct device *dev, struct device_driver *drv)
301{
302 const struct spi_device *spi = to_spi_device(dev);
303 const struct spi_driver *sdrv = to_spi_driver(drv);
304
305 /* Attempt an OF style match */
306 if (of_driver_match_device(dev, drv))
307 return 1;
308
309 /* Then try ACPI */
310 if (acpi_driver_match_device(dev, drv))
311 return 1;
312
313 if (sdrv->id_table)
314 return !!spi_match_id(sdrv->id_table, spi);
315
316 return strcmp(spi->modalias, drv->name) == 0;
317}
318
319static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
320{
321 const struct spi_device *spi = to_spi_device(dev);
322 int rc;
323
324 rc = acpi_device_uevent_modalias(dev, env);
325 if (rc != -ENODEV)
326 return rc;
327
328 return add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
329}
330
331struct bus_type spi_bus_type = {
332 .name = "spi",
333 .dev_groups = spi_dev_groups,
334 .match = spi_match_device,
335 .uevent = spi_uevent,
336};
337EXPORT_SYMBOL_GPL(spi_bus_type);
338
339
340static int spi_drv_probe(struct device *dev)
341{
342 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
343 struct spi_device *spi = to_spi_device(dev);
344 int ret;
345
346 ret = of_clk_set_defaults(dev->of_node, false);
347 if (ret)
348 return ret;
349
350 if (dev->of_node) {
351 spi->irq = of_irq_get(dev->of_node, 0);
352 if (spi->irq == -EPROBE_DEFER)
353 return -EPROBE_DEFER;
354 if (spi->irq < 0)
355 spi->irq = 0;
356 }
357
358 ret = dev_pm_domain_attach(dev, true);
359 if (ret != -EPROBE_DEFER) {
360 ret = sdrv->probe(spi);
361 if (ret)
362 dev_pm_domain_detach(dev, true);
363 }
364
365 return ret;
366}
367
368static int spi_drv_remove(struct device *dev)
369{
370 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
371 int ret;
372
373 ret = sdrv->remove(to_spi_device(dev));
374 dev_pm_domain_detach(dev, true);
375
376 return ret;
377}
378
379static void spi_drv_shutdown(struct device *dev)
380{
381 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
382
383 sdrv->shutdown(to_spi_device(dev));
384}
385
386/**
387 * __spi_register_driver - register a SPI driver
388 * @owner: owner module of the driver to register
389 * @sdrv: the driver to register
390 * Context: can sleep
391 *
392 * Return: zero on success, else a negative error code.
393 */
394int __spi_register_driver(struct module *owner, struct spi_driver *sdrv)
395{
396 sdrv->driver.owner = owner;
397 sdrv->driver.bus = &spi_bus_type;
398 if (sdrv->probe)
399 sdrv->driver.probe = spi_drv_probe;
400 if (sdrv->remove)
401 sdrv->driver.remove = spi_drv_remove;
402 if (sdrv->shutdown)
403 sdrv->driver.shutdown = spi_drv_shutdown;
404 return driver_register(&sdrv->driver);
405}
406EXPORT_SYMBOL_GPL(__spi_register_driver);
407
408/*-------------------------------------------------------------------------*/
409
410/* SPI devices should normally not be created by SPI device drivers; that
411 * would make them board-specific. Similarly with SPI controller drivers.
412 * Device registration normally goes into like arch/.../mach.../board-YYY.c
413 * with other readonly (flashable) information about mainboard devices.
414 */
415
416struct boardinfo {
417 struct list_head list;
418 struct spi_board_info board_info;
419};
420
421static LIST_HEAD(board_list);
422static LIST_HEAD(spi_controller_list);
423
424/*
425 * Used to protect add/del opertion for board_info list and
426 * spi_controller list, and their matching process
427 * also used to protect object of type struct idr
428 */
429static DEFINE_MUTEX(board_lock);
430
431/**
432 * spi_alloc_device - Allocate a new SPI device
433 * @ctlr: Controller to which device is connected
434 * Context: can sleep
435 *
436 * Allows a driver to allocate and initialize a spi_device without
437 * registering it immediately. This allows a driver to directly
438 * fill the spi_device with device parameters before calling
439 * spi_add_device() on it.
440 *
441 * Caller is responsible to call spi_add_device() on the returned
442 * spi_device structure to add it to the SPI controller. If the caller
443 * needs to discard the spi_device without adding it, then it should
444 * call spi_dev_put() on it.
445 *
446 * Return: a pointer to the new device, or NULL.
447 */
448struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
449{
450 struct spi_device *spi;
451
452 if (!spi_controller_get(ctlr))
453 return NULL;
454
455 spi = kzalloc(sizeof(*spi), GFP_KERNEL);
456 if (!spi) {
457 spi_controller_put(ctlr);
458 return NULL;
459 }
460
461 spi->master = spi->controller = ctlr;
462 spi->dev.parent = &ctlr->dev;
463 spi->dev.bus = &spi_bus_type;
464 spi->dev.release = spidev_release;
465 spi->cs_gpio = -ENOENT;
466
467 spin_lock_init(&spi->statistics.lock);
468
469 device_initialize(&spi->dev);
470 return spi;
471}
472EXPORT_SYMBOL_GPL(spi_alloc_device);
473
474static void spi_dev_set_name(struct spi_device *spi)
475{
476 struct acpi_device *adev = ACPI_COMPANION(&spi->dev);
477
478 if (adev) {
479 dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
480 return;
481 }
482
483 dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->controller->dev),
484 spi->chip_select);
485}
486
487static int spi_dev_check(struct device *dev, void *data)
488{
489 struct spi_device *spi = to_spi_device(dev);
490 struct spi_device *new_spi = data;
491
492 if (spi->controller == new_spi->controller &&
493 spi->chip_select == new_spi->chip_select)
494 return -EBUSY;
495 return 0;
496}
497
498/**
499 * spi_add_device - Add spi_device allocated with spi_alloc_device
500 * @spi: spi_device to register
501 *
502 * Companion function to spi_alloc_device. Devices allocated with
503 * spi_alloc_device can be added onto the spi bus with this function.
504 *
505 * Return: 0 on success; negative errno on failure
506 */
507int spi_add_device(struct spi_device *spi)
508{
509 static DEFINE_MUTEX(spi_add_lock);
510 struct spi_controller *ctlr = spi->controller;
511 struct device *dev = ctlr->dev.parent;
512 int status;
513
514 /* Chipselects are numbered 0..max; validate. */
515 if (spi->chip_select >= ctlr->num_chipselect) {
516 dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
517 ctlr->num_chipselect);
518 return -EINVAL;
519 }
520
521 /* Set the bus ID string */
522 spi_dev_set_name(spi);
523
524 /* We need to make sure there's no other device with this
525 * chipselect **BEFORE** we call setup(), else we'll trash
526 * its configuration. Lock against concurrent add() calls.
527 */
528 mutex_lock(&spi_add_lock);
529
530 status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
531 if (status) {
532 dev_err(dev, "chipselect %d already in use\n",
533 spi->chip_select);
534 goto done;
535 }
536
537 if (ctlr->cs_gpios)
538 spi->cs_gpio = ctlr->cs_gpios[spi->chip_select];
539
540 /* Drivers may modify this initial i/o setup, but will
541 * normally rely on the device being setup. Devices
542 * using SPI_CS_HIGH can't coexist well otherwise...
543 */
544 status = spi_setup(spi);
545 if (status < 0) {
546 dev_err(dev, "can't setup %s, status %d\n",
547 dev_name(&spi->dev), status);
548 goto done;
549 }
550
551 /* Device may be bound to an active driver when this returns */
552 status = device_add(&spi->dev);
553 if (status < 0)
554 dev_err(dev, "can't add %s, status %d\n",
555 dev_name(&spi->dev), status);
556 else
557 dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
558
559done:
560 mutex_unlock(&spi_add_lock);
561 return status;
562}
563EXPORT_SYMBOL_GPL(spi_add_device);
564
565/**
566 * spi_new_device - instantiate one new SPI device
567 * @ctlr: Controller to which device is connected
568 * @chip: Describes the SPI device
569 * Context: can sleep
570 *
571 * On typical mainboards, this is purely internal; and it's not needed
572 * after board init creates the hard-wired devices. Some development
573 * platforms may not be able to use spi_register_board_info though, and
574 * this is exported so that for example a USB or parport based adapter
575 * driver could add devices (which it would learn about out-of-band).
576 *
577 * Return: the new device, or NULL.
578 */
579struct spi_device *spi_new_device(struct spi_controller *ctlr,
580 struct spi_board_info *chip)
581{
582 struct spi_device *proxy;
583 int status;
584
585 /* NOTE: caller did any chip->bus_num checks necessary.
586 *
587 * Also, unless we change the return value convention to use
588 * error-or-pointer (not NULL-or-pointer), troubleshootability
589 * suggests syslogged diagnostics are best here (ugh).
590 */
591
592 proxy = spi_alloc_device(ctlr);
593 if (!proxy)
594 return NULL;
595
596 WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
597
598 proxy->chip_select = chip->chip_select;
599 proxy->max_speed_hz = chip->max_speed_hz;
600 proxy->mode = chip->mode;
601 proxy->irq = chip->irq;
602 strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
603 proxy->dev.platform_data = (void *) chip->platform_data;
604 proxy->controller_data = chip->controller_data;
605 proxy->controller_state = NULL;
606
607 if (chip->properties) {
608 status = device_add_properties(&proxy->dev, chip->properties);
609 if (status) {
610 dev_err(&ctlr->dev,
611 "failed to add properties to '%s': %d\n",
612 chip->modalias, status);
613 goto err_dev_put;
614 }
615 }
616
617 status = spi_add_device(proxy);
618 if (status < 0)
619 goto err_remove_props;
620
621 return proxy;
622
623err_remove_props:
624 if (chip->properties)
625 device_remove_properties(&proxy->dev);
626err_dev_put:
627 spi_dev_put(proxy);
628 return NULL;
629}
630EXPORT_SYMBOL_GPL(spi_new_device);
631
632/**
633 * spi_unregister_device - unregister a single SPI device
634 * @spi: spi_device to unregister
635 *
636 * Start making the passed SPI device vanish. Normally this would be handled
637 * by spi_unregister_controller().
638 */
639void spi_unregister_device(struct spi_device *spi)
640{
641 if (!spi)
642 return;
643
644 if (spi->dev.of_node) {
645 of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
646 of_node_put(spi->dev.of_node);
647 }
648 if (ACPI_COMPANION(&spi->dev))
649 acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
650 device_unregister(&spi->dev);
651}
652EXPORT_SYMBOL_GPL(spi_unregister_device);
653
654static void spi_match_controller_to_boardinfo(struct spi_controller *ctlr,
655 struct spi_board_info *bi)
656{
657 struct spi_device *dev;
658
659 if (ctlr->bus_num != bi->bus_num)
660 return;
661
662 dev = spi_new_device(ctlr, bi);
663 if (!dev)
664 dev_err(ctlr->dev.parent, "can't create new device for %s\n",
665 bi->modalias);
666}
667
668/**
669 * spi_register_board_info - register SPI devices for a given board
670 * @info: array of chip descriptors
671 * @n: how many descriptors are provided
672 * Context: can sleep
673 *
674 * Board-specific early init code calls this (probably during arch_initcall)
675 * with segments of the SPI device table. Any device nodes are created later,
676 * after the relevant parent SPI controller (bus_num) is defined. We keep
677 * this table of devices forever, so that reloading a controller driver will
678 * not make Linux forget about these hard-wired devices.
679 *
680 * Other code can also call this, e.g. a particular add-on board might provide
681 * SPI devices through its expansion connector, so code initializing that board
682 * would naturally declare its SPI devices.
683 *
684 * The board info passed can safely be __initdata ... but be careful of
685 * any embedded pointers (platform_data, etc), they're copied as-is.
686 * Device properties are deep-copied though.
687 *
688 * Return: zero on success, else a negative error code.
689 */
690int spi_register_board_info(struct spi_board_info const *info, unsigned n)
691{
692 struct boardinfo *bi;
693 int i;
694
695 if (!n)
696 return 0;
697
698 bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
699 if (!bi)
700 return -ENOMEM;
701
702 for (i = 0; i < n; i++, bi++, info++) {
703 struct spi_controller *ctlr;
704
705 memcpy(&bi->board_info, info, sizeof(*info));
706 if (info->properties) {
707 bi->board_info.properties =
708 property_entries_dup(info->properties);
709 if (IS_ERR(bi->board_info.properties))
710 return PTR_ERR(bi->board_info.properties);
711 }
712
713 mutex_lock(&board_lock);
714 list_add_tail(&bi->list, &board_list);
715 list_for_each_entry(ctlr, &spi_controller_list, list)
716 spi_match_controller_to_boardinfo(ctlr,
717 &bi->board_info);
718 mutex_unlock(&board_lock);
719 }
720
721 return 0;
722}
723
724/*-------------------------------------------------------------------------*/
725
726static void spi_set_cs(struct spi_device *spi, bool enable)
727{
728 if (spi->mode & SPI_CS_HIGH)
729 enable = !enable;
730
731 if (gpio_is_valid(spi->cs_gpio)) {
732 gpio_set_value(spi->cs_gpio, !enable);
733 /* Some SPI masters need both GPIO CS & slave_select */
734 if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
735 spi->controller->set_cs)
736 spi->controller->set_cs(spi, !enable);
737 } else if (spi->controller->set_cs) {
738 spi->controller->set_cs(spi, !enable);
739 }
740}
741
742#ifdef CONFIG_HAS_DMA
743static int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
744 struct sg_table *sgt, void *buf, size_t len,
745 enum dma_data_direction dir)
746{
747 const bool vmalloced_buf = is_vmalloc_addr(buf);
748 unsigned int max_seg_size = dma_get_max_seg_size(dev);
749#ifdef CONFIG_HIGHMEM
750 const bool kmap_buf = ((unsigned long)buf >= PKMAP_BASE &&
751 (unsigned long)buf < (PKMAP_BASE +
752 (LAST_PKMAP * PAGE_SIZE)));
753#else
754 const bool kmap_buf = false;
755#endif
756 int desc_len;
757 int sgs;
758 struct page *vm_page;
759 struct scatterlist *sg;
760 void *sg_buf;
761 size_t min;
762 int i, ret;
763
764 if (vmalloced_buf || kmap_buf) {
765 desc_len = min_t(int, max_seg_size, PAGE_SIZE);
766 sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
767 } else if (virt_addr_valid(buf)) {
768 desc_len = min_t(int, max_seg_size, ctlr->max_dma_len);
769 sgs = DIV_ROUND_UP(len, desc_len);
770 } else {
771 return -EINVAL;
772 }
773
774 ret = sg_alloc_table(sgt, sgs, GFP_KERNEL);
775 if (ret != 0)
776 return ret;
777
778 sg = &sgt->sgl[0];
779 for (i = 0; i < sgs; i++) {
780
781 if (vmalloced_buf || kmap_buf) {
782 /*
783 * Next scatterlist entry size is the minimum between
784 * the desc_len and the remaining buffer length that
785 * fits in a page.
786 */
787 min = min_t(size_t, desc_len,
788 min_t(size_t, len,
789 PAGE_SIZE - offset_in_page(buf)));
790 if (vmalloced_buf)
791 vm_page = vmalloc_to_page(buf);
792 else
793 vm_page = kmap_to_page(buf);
794 if (!vm_page) {
795 sg_free_table(sgt);
796 return -ENOMEM;
797 }
798 sg_set_page(sg, vm_page,
799 min, offset_in_page(buf));
800 } else {
801 min = min_t(size_t, len, desc_len);
802 sg_buf = buf;
803 sg_set_buf(sg, sg_buf, min);
804 }
805
806 buf += min;
807 len -= min;
808 sg = sg_next(sg);
809 }
810
811 ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir);
812 if (!ret)
813 ret = -ENOMEM;
814 if (ret < 0) {
815 sg_free_table(sgt);
816 return ret;
817 }
818
819 sgt->nents = ret;
820
821 return 0;
822}
823
824static void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
825 struct sg_table *sgt, enum dma_data_direction dir)
826{
827 if (sgt->orig_nents) {
828 dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir);
829 sg_free_table(sgt);
830 }
831}
832
833static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
834{
835 struct device *tx_dev, *rx_dev;
836 struct spi_transfer *xfer;
837 int ret;
838
839 if (!ctlr->can_dma)
840 return 0;
841
842 if (ctlr->dma_tx)
843 tx_dev = ctlr->dma_tx->device->dev;
844 else
845 tx_dev = ctlr->dev.parent;
846
847 if (ctlr->dma_rx)
848 rx_dev = ctlr->dma_rx->device->dev;
849 else
850 rx_dev = ctlr->dev.parent;
851
852 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
853 if (!ctlr->can_dma(ctlr, msg->spi, xfer))
854 continue;
855
856 if (xfer->tx_buf != NULL) {
857 ret = spi_map_buf(ctlr, tx_dev, &xfer->tx_sg,
858 (void *)xfer->tx_buf, xfer->len,
859 DMA_TO_DEVICE);
860 if (ret != 0)
861 return ret;
862 }
863
864 if (xfer->rx_buf != NULL) {
865 ret = spi_map_buf(ctlr, rx_dev, &xfer->rx_sg,
866 xfer->rx_buf, xfer->len,
867 DMA_FROM_DEVICE);
868 if (ret != 0) {
869 spi_unmap_buf(ctlr, tx_dev, &xfer->tx_sg,
870 DMA_TO_DEVICE);
871 return ret;
872 }
873 }
874 }
875
876 ctlr->cur_msg_mapped = true;
877
878 return 0;
879}
880
881static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
882{
883 struct spi_transfer *xfer;
884 struct device *tx_dev, *rx_dev;
885
886 if (!ctlr->cur_msg_mapped || !ctlr->can_dma)
887 return 0;
888
889 if (ctlr->dma_tx)
890 tx_dev = ctlr->dma_tx->device->dev;
891 else
892 tx_dev = ctlr->dev.parent;
893
894 if (ctlr->dma_rx)
895 rx_dev = ctlr->dma_rx->device->dev;
896 else
897 rx_dev = ctlr->dev.parent;
898
899 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
900 if (!ctlr->can_dma(ctlr, msg->spi, xfer))
901 continue;
902
903 spi_unmap_buf(ctlr, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
904 spi_unmap_buf(ctlr, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
905 }
906
907 return 0;
908}
909#else /* !CONFIG_HAS_DMA */
910static inline int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
911 struct sg_table *sgt, void *buf, size_t len,
912 enum dma_data_direction dir)
913{
914 return -EINVAL;
915}
916
917static inline void spi_unmap_buf(struct spi_controller *ctlr,
918 struct device *dev, struct sg_table *sgt,
919 enum dma_data_direction dir)
920{
921}
922
923static inline int __spi_map_msg(struct spi_controller *ctlr,
924 struct spi_message *msg)
925{
926 return 0;
927}
928
929static inline int __spi_unmap_msg(struct spi_controller *ctlr,
930 struct spi_message *msg)
931{
932 return 0;
933}
934#endif /* !CONFIG_HAS_DMA */
935
936static inline int spi_unmap_msg(struct spi_controller *ctlr,
937 struct spi_message *msg)
938{
939 struct spi_transfer *xfer;
940
941 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
942 /*
943 * Restore the original value of tx_buf or rx_buf if they are
944 * NULL.
945 */
946 if (xfer->tx_buf == ctlr->dummy_tx)
947 xfer->tx_buf = NULL;
948 if (xfer->rx_buf == ctlr->dummy_rx)
949 xfer->rx_buf = NULL;
950 }
951
952 return __spi_unmap_msg(ctlr, msg);
953}
954
955static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
956{
957 struct spi_transfer *xfer;
958 void *tmp;
959 unsigned int max_tx, max_rx;
960
961 if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
962 max_tx = 0;
963 max_rx = 0;
964
965 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
966 if ((ctlr->flags & SPI_CONTROLLER_MUST_TX) &&
967 !xfer->tx_buf)
968 max_tx = max(xfer->len, max_tx);
969 if ((ctlr->flags & SPI_CONTROLLER_MUST_RX) &&
970 !xfer->rx_buf)
971 max_rx = max(xfer->len, max_rx);
972 }
973
974 if (max_tx) {
975 tmp = krealloc(ctlr->dummy_tx, max_tx,
976 GFP_KERNEL | GFP_DMA);
977 if (!tmp)
978 return -ENOMEM;
979 ctlr->dummy_tx = tmp;
980 memset(tmp, 0, max_tx);
981 }
982
983 if (max_rx) {
984 tmp = krealloc(ctlr->dummy_rx, max_rx,
985 GFP_KERNEL | GFP_DMA);
986 if (!tmp)
987 return -ENOMEM;
988 ctlr->dummy_rx = tmp;
989 }
990
991 if (max_tx || max_rx) {
992 list_for_each_entry(xfer, &msg->transfers,
993 transfer_list) {
994 if (!xfer->tx_buf)
995 xfer->tx_buf = ctlr->dummy_tx;
996 if (!xfer->rx_buf)
997 xfer->rx_buf = ctlr->dummy_rx;
998 }
999 }
1000 }
1001
1002 return __spi_map_msg(ctlr, msg);
1003}
1004
1005/*
1006 * spi_transfer_one_message - Default implementation of transfer_one_message()
1007 *
1008 * This is a standard implementation of transfer_one_message() for
1009 * drivers which implement a transfer_one() operation. It provides
1010 * standard handling of delays and chip select management.
1011 */
1012static int spi_transfer_one_message(struct spi_controller *ctlr,
1013 struct spi_message *msg)
1014{
1015 struct spi_transfer *xfer;
1016 bool keep_cs = false;
1017 int ret = 0;
1018 unsigned long long ms = 1;
1019 struct spi_statistics *statm = &ctlr->statistics;
1020 struct spi_statistics *stats = &msg->spi->statistics;
1021
1022 spi_set_cs(msg->spi, true);
1023
1024 SPI_STATISTICS_INCREMENT_FIELD(statm, messages);
1025 SPI_STATISTICS_INCREMENT_FIELD(stats, messages);
1026
1027 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1028 trace_spi_transfer_start(msg, xfer);
1029
1030 spi_statistics_add_transfer_stats(statm, xfer, ctlr);
1031 spi_statistics_add_transfer_stats(stats, xfer, ctlr);
1032
1033 if (xfer->tx_buf || xfer->rx_buf) {
1034 reinit_completion(&ctlr->xfer_completion);
1035
1036 ret = ctlr->transfer_one(ctlr, msg->spi, xfer);
1037 if (ret < 0) {
1038 SPI_STATISTICS_INCREMENT_FIELD(statm,
1039 errors);
1040 SPI_STATISTICS_INCREMENT_FIELD(stats,
1041 errors);
1042 dev_err(&msg->spi->dev,
1043 "SPI transfer failed: %d\n", ret);
1044 goto out;
1045 }
1046
1047 if (ret > 0) {
1048 ret = 0;
1049 ms = 8LL * 1000LL * xfer->len;
1050 do_div(ms, xfer->speed_hz);
1051 ms += ms + 200; /* some tolerance */
1052
1053 if (ms > UINT_MAX)
1054 ms = UINT_MAX;
1055
1056 ms = wait_for_completion_timeout(&ctlr->xfer_completion,
1057 msecs_to_jiffies(ms));
1058 }
1059
1060 if (ms == 0) {
1061 SPI_STATISTICS_INCREMENT_FIELD(statm,
1062 timedout);
1063 SPI_STATISTICS_INCREMENT_FIELD(stats,
1064 timedout);
1065 dev_err(&msg->spi->dev,
1066 "SPI transfer timed out\n");
1067 msg->status = -ETIMEDOUT;
1068 }
1069 } else {
1070 if (xfer->len)
1071 dev_err(&msg->spi->dev,
1072 "Bufferless transfer has length %u\n",
1073 xfer->len);
1074 }
1075
1076 trace_spi_transfer_stop(msg, xfer);
1077
1078 if (msg->status != -EINPROGRESS)
1079 goto out;
1080
1081 if (xfer->delay_usecs) {
1082 u16 us = xfer->delay_usecs;
1083
1084 if (us <= 10)
1085 udelay(us);
1086 else
1087 usleep_range(us, us + DIV_ROUND_UP(us, 10));
1088 }
1089
1090 if (xfer->cs_change) {
1091 if (list_is_last(&xfer->transfer_list,
1092 &msg->transfers)) {
1093 keep_cs = true;
1094 } else {
1095 spi_set_cs(msg->spi, false);
1096 udelay(10);
1097 spi_set_cs(msg->spi, true);
1098 }
1099 }
1100
1101 msg->actual_length += xfer->len;
1102 }
1103
1104out:
1105 if (ret != 0 || !keep_cs)
1106 spi_set_cs(msg->spi, false);
1107
1108 if (msg->status == -EINPROGRESS)
1109 msg->status = ret;
1110
1111 if (msg->status && ctlr->handle_err)
1112 ctlr->handle_err(ctlr, msg);
1113
1114 spi_res_release(ctlr, msg);
1115
1116 spi_finalize_current_message(ctlr);
1117
1118 return ret;
1119}
1120
1121/**
1122 * spi_finalize_current_transfer - report completion of a transfer
1123 * @ctlr: the controller reporting completion
1124 *
1125 * Called by SPI drivers using the core transfer_one_message()
1126 * implementation to notify it that the current interrupt driven
1127 * transfer has finished and the next one may be scheduled.
1128 */
1129void spi_finalize_current_transfer(struct spi_controller *ctlr)
1130{
1131 complete(&ctlr->xfer_completion);
1132}
1133EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
1134
1135/**
1136 * __spi_pump_messages - function which processes spi message queue
1137 * @ctlr: controller to process queue for
1138 * @in_kthread: true if we are in the context of the message pump thread
1139 *
1140 * This function checks if there is any spi message in the queue that
1141 * needs processing and if so call out to the driver to initialize hardware
1142 * and transfer each message.
1143 *
1144 * Note that it is called both from the kthread itself and also from
1145 * inside spi_sync(); the queue extraction handling at the top of the
1146 * function should deal with this safely.
1147 */
1148static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
1149{
1150 unsigned long flags;
1151 bool was_busy = false;
1152 int ret;
1153
1154 /* Lock queue */
1155 spin_lock_irqsave(&ctlr->queue_lock, flags);
1156
1157 /* Make sure we are not already running a message */
1158 if (ctlr->cur_msg) {
1159 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1160 return;
1161 }
1162
1163 /* If another context is idling the device then defer */
1164 if (ctlr->idling) {
1165 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1166 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1167 return;
1168 }
1169
1170 /* Check if the queue is idle */
1171 if (list_empty(&ctlr->queue) || !ctlr->running) {
1172 if (!ctlr->busy) {
1173 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1174 return;
1175 }
1176
1177 /* Only do teardown in the thread */
1178 if (!in_kthread) {
1179 kthread_queue_work(&ctlr->kworker,
1180 &ctlr->pump_messages);
1181 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1182 return;
1183 }
1184
1185 ctlr->busy = false;
1186 ctlr->idling = true;
1187 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1188
1189 kfree(ctlr->dummy_rx);
1190 ctlr->dummy_rx = NULL;
1191 kfree(ctlr->dummy_tx);
1192 ctlr->dummy_tx = NULL;
1193 if (ctlr->unprepare_transfer_hardware &&
1194 ctlr->unprepare_transfer_hardware(ctlr))
1195 dev_err(&ctlr->dev,
1196 "failed to unprepare transfer hardware\n");
1197 if (ctlr->auto_runtime_pm) {
1198 pm_runtime_mark_last_busy(ctlr->dev.parent);
1199 pm_runtime_put_autosuspend(ctlr->dev.parent);
1200 }
1201 trace_spi_controller_idle(ctlr);
1202
1203 spin_lock_irqsave(&ctlr->queue_lock, flags);
1204 ctlr->idling = false;
1205 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1206 return;
1207 }
1208
1209 /* Extract head of queue */
1210 ctlr->cur_msg =
1211 list_first_entry(&ctlr->queue, struct spi_message, queue);
1212
1213 list_del_init(&ctlr->cur_msg->queue);
1214 if (ctlr->busy)
1215 was_busy = true;
1216 else
1217 ctlr->busy = true;
1218 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1219
1220 mutex_lock(&ctlr->io_mutex);
1221
1222 if (!was_busy && ctlr->auto_runtime_pm) {
1223 ret = pm_runtime_get_sync(ctlr->dev.parent);
1224 if (ret < 0) {
1225 dev_err(&ctlr->dev, "Failed to power device: %d\n",
1226 ret);
1227 mutex_unlock(&ctlr->io_mutex);
1228 return;
1229 }
1230 }
1231
1232 if (!was_busy)
1233 trace_spi_controller_busy(ctlr);
1234
1235 if (!was_busy && ctlr->prepare_transfer_hardware) {
1236 ret = ctlr->prepare_transfer_hardware(ctlr);
1237 if (ret) {
1238 dev_err(&ctlr->dev,
1239 "failed to prepare transfer hardware\n");
1240
1241 if (ctlr->auto_runtime_pm)
1242 pm_runtime_put(ctlr->dev.parent);
1243 mutex_unlock(&ctlr->io_mutex);
1244 return;
1245 }
1246 }
1247
1248 trace_spi_message_start(ctlr->cur_msg);
1249
1250 if (ctlr->prepare_message) {
1251 ret = ctlr->prepare_message(ctlr, ctlr->cur_msg);
1252 if (ret) {
1253 dev_err(&ctlr->dev, "failed to prepare message: %d\n",
1254 ret);
1255 ctlr->cur_msg->status = ret;
1256 spi_finalize_current_message(ctlr);
1257 goto out;
1258 }
1259 ctlr->cur_msg_prepared = true;
1260 }
1261
1262 ret = spi_map_msg(ctlr, ctlr->cur_msg);
1263 if (ret) {
1264 ctlr->cur_msg->status = ret;
1265 spi_finalize_current_message(ctlr);
1266 goto out;
1267 }
1268
1269 ret = ctlr->transfer_one_message(ctlr, ctlr->cur_msg);
1270 if (ret) {
1271 dev_err(&ctlr->dev,
1272 "failed to transfer one message from queue\n");
1273 goto out;
1274 }
1275
1276out:
1277 mutex_unlock(&ctlr->io_mutex);
1278
1279 /* Prod the scheduler in case transfer_one() was busy waiting */
1280 if (!ret)
1281 cond_resched();
1282}
1283
1284/**
1285 * spi_pump_messages - kthread work function which processes spi message queue
1286 * @work: pointer to kthread work struct contained in the controller struct
1287 */
1288static void spi_pump_messages(struct kthread_work *work)
1289{
1290 struct spi_controller *ctlr =
1291 container_of(work, struct spi_controller, pump_messages);
1292
1293 __spi_pump_messages(ctlr, true);
1294}
1295
1296static int spi_init_queue(struct spi_controller *ctlr)
1297{
1298 struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
1299
1300 ctlr->running = false;
1301 ctlr->busy = false;
1302
1303 kthread_init_worker(&ctlr->kworker);
1304 ctlr->kworker_task = kthread_run(kthread_worker_fn, &ctlr->kworker,
1305 "%s", dev_name(&ctlr->dev));
1306 if (IS_ERR(ctlr->kworker_task)) {
1307 dev_err(&ctlr->dev, "failed to create message pump task\n");
1308 return PTR_ERR(ctlr->kworker_task);
1309 }
1310 kthread_init_work(&ctlr->pump_messages, spi_pump_messages);
1311
1312 /*
1313 * Controller config will indicate if this controller should run the
1314 * message pump with high (realtime) priority to reduce the transfer
1315 * latency on the bus by minimising the delay between a transfer
1316 * request and the scheduling of the message pump thread. Without this
1317 * setting the message pump thread will remain at default priority.
1318 */
1319 if (ctlr->rt) {
1320 dev_info(&ctlr->dev,
1321 "will run message pump with realtime priority\n");
1322 sched_setscheduler(ctlr->kworker_task, SCHED_FIFO, ¶m);
1323 }
1324
1325 return 0;
1326}
1327
1328/**
1329 * spi_get_next_queued_message() - called by driver to check for queued
1330 * messages
1331 * @ctlr: the controller to check for queued messages
1332 *
1333 * If there are more messages in the queue, the next message is returned from
1334 * this call.
1335 *
1336 * Return: the next message in the queue, else NULL if the queue is empty.
1337 */
1338struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr)
1339{
1340 struct spi_message *next;
1341 unsigned long flags;
1342
1343 /* get a pointer to the next message, if any */
1344 spin_lock_irqsave(&ctlr->queue_lock, flags);
1345 next = list_first_entry_or_null(&ctlr->queue, struct spi_message,
1346 queue);
1347 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1348
1349 return next;
1350}
1351EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
1352
1353/**
1354 * spi_finalize_current_message() - the current message is complete
1355 * @ctlr: the controller to return the message to
1356 *
1357 * Called by the driver to notify the core that the message in the front of the
1358 * queue is complete and can be removed from the queue.
1359 */
1360void spi_finalize_current_message(struct spi_controller *ctlr)
1361{
1362 struct spi_message *mesg;
1363 unsigned long flags;
1364 int ret;
1365
1366 spin_lock_irqsave(&ctlr->queue_lock, flags);
1367 mesg = ctlr->cur_msg;
1368 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1369
1370 spi_unmap_msg(ctlr, mesg);
1371
1372 if (ctlr->cur_msg_prepared && ctlr->unprepare_message) {
1373 ret = ctlr->unprepare_message(ctlr, mesg);
1374 if (ret) {
1375 dev_err(&ctlr->dev, "failed to unprepare message: %d\n",
1376 ret);
1377 }
1378 }
1379
1380 spin_lock_irqsave(&ctlr->queue_lock, flags);
1381 ctlr->cur_msg = NULL;
1382 ctlr->cur_msg_prepared = false;
1383 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1384 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1385
1386 trace_spi_message_done(mesg);
1387
1388 mesg->state = NULL;
1389 if (mesg->complete)
1390 mesg->complete(mesg->context);
1391}
1392EXPORT_SYMBOL_GPL(spi_finalize_current_message);
1393
1394static int spi_start_queue(struct spi_controller *ctlr)
1395{
1396 unsigned long flags;
1397
1398 spin_lock_irqsave(&ctlr->queue_lock, flags);
1399
1400 if (ctlr->running || ctlr->busy) {
1401 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1402 return -EBUSY;
1403 }
1404
1405 ctlr->running = true;
1406 ctlr->cur_msg = NULL;
1407 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1408
1409 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1410
1411 return 0;
1412}
1413
1414static int spi_stop_queue(struct spi_controller *ctlr)
1415{
1416 unsigned long flags;
1417 unsigned limit = 500;
1418 int ret = 0;
1419
1420 spin_lock_irqsave(&ctlr->queue_lock, flags);
1421
1422 /*
1423 * This is a bit lame, but is optimized for the common execution path.
1424 * A wait_queue on the ctlr->busy could be used, but then the common
1425 * execution path (pump_messages) would be required to call wake_up or
1426 * friends on every SPI message. Do this instead.
1427 */
1428 while ((!list_empty(&ctlr->queue) || ctlr->busy) && limit--) {
1429 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1430 usleep_range(10000, 11000);
1431 spin_lock_irqsave(&ctlr->queue_lock, flags);
1432 }
1433
1434 if (!list_empty(&ctlr->queue) || ctlr->busy)
1435 ret = -EBUSY;
1436 else
1437 ctlr->running = false;
1438
1439 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1440
1441 if (ret) {
1442 dev_warn(&ctlr->dev, "could not stop message queue\n");
1443 return ret;
1444 }
1445 return ret;
1446}
1447
1448static int spi_destroy_queue(struct spi_controller *ctlr)
1449{
1450 int ret;
1451
1452 ret = spi_stop_queue(ctlr);
1453
1454 /*
1455 * kthread_flush_worker will block until all work is done.
1456 * If the reason that stop_queue timed out is that the work will never
1457 * finish, then it does no good to call flush/stop thread, so
1458 * return anyway.
1459 */
1460 if (ret) {
1461 dev_err(&ctlr->dev, "problem destroying queue\n");
1462 return ret;
1463 }
1464
1465 kthread_flush_worker(&ctlr->kworker);
1466 kthread_stop(ctlr->kworker_task);
1467
1468 return 0;
1469}
1470
1471static int __spi_queued_transfer(struct spi_device *spi,
1472 struct spi_message *msg,
1473 bool need_pump)
1474{
1475 struct spi_controller *ctlr = spi->controller;
1476 unsigned long flags;
1477
1478 spin_lock_irqsave(&ctlr->queue_lock, flags);
1479
1480 if (!ctlr->running) {
1481 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1482 return -ESHUTDOWN;
1483 }
1484 msg->actual_length = 0;
1485 msg->status = -EINPROGRESS;
1486
1487 list_add_tail(&msg->queue, &ctlr->queue);
1488 if (!ctlr->busy && need_pump)
1489 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1490
1491 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1492 return 0;
1493}
1494
1495/**
1496 * spi_queued_transfer - transfer function for queued transfers
1497 * @spi: spi device which is requesting transfer
1498 * @msg: spi message which is to handled is queued to driver queue
1499 *
1500 * Return: zero on success, else a negative error code.
1501 */
1502static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
1503{
1504 return __spi_queued_transfer(spi, msg, true);
1505}
1506
1507static int spi_controller_initialize_queue(struct spi_controller *ctlr)
1508{
1509 int ret;
1510
1511 ctlr->transfer = spi_queued_transfer;
1512 if (!ctlr->transfer_one_message)
1513 ctlr->transfer_one_message = spi_transfer_one_message;
1514
1515 /* Initialize and start queue */
1516 ret = spi_init_queue(ctlr);
1517 if (ret) {
1518 dev_err(&ctlr->dev, "problem initializing queue\n");
1519 goto err_init_queue;
1520 }
1521 ctlr->queued = true;
1522 ret = spi_start_queue(ctlr);
1523 if (ret) {
1524 dev_err(&ctlr->dev, "problem starting queue\n");
1525 goto err_start_queue;
1526 }
1527
1528 return 0;
1529
1530err_start_queue:
1531 spi_destroy_queue(ctlr);
1532err_init_queue:
1533 return ret;
1534}
1535
1536/*-------------------------------------------------------------------------*/
1537
1538#if defined(CONFIG_OF)
1539static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
1540 struct device_node *nc)
1541{
1542 u32 value;
1543 int rc;
1544
1545 /* Mode (clock phase/polarity/etc.) */
1546 if (of_property_read_bool(nc, "spi-cpha"))
1547 spi->mode |= SPI_CPHA;
1548 if (of_property_read_bool(nc, "spi-cpol"))
1549 spi->mode |= SPI_CPOL;
1550 if (of_property_read_bool(nc, "spi-cs-high"))
1551 spi->mode |= SPI_CS_HIGH;
1552 if (of_property_read_bool(nc, "spi-3wire"))
1553 spi->mode |= SPI_3WIRE;
1554 if (of_property_read_bool(nc, "spi-lsb-first"))
1555 spi->mode |= SPI_LSB_FIRST;
1556
1557 /* Device DUAL/QUAD mode */
1558 if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
1559 switch (value) {
1560 case 1:
1561 break;
1562 case 2:
1563 spi->mode |= SPI_TX_DUAL;
1564 break;
1565 case 4:
1566 spi->mode |= SPI_TX_QUAD;
1567 break;
1568 default:
1569 dev_warn(&ctlr->dev,
1570 "spi-tx-bus-width %d not supported\n",
1571 value);
1572 break;
1573 }
1574 }
1575
1576 if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
1577 switch (value) {
1578 case 1:
1579 break;
1580 case 2:
1581 spi->mode |= SPI_RX_DUAL;
1582 break;
1583 case 4:
1584 spi->mode |= SPI_RX_QUAD;
1585 break;
1586 default:
1587 dev_warn(&ctlr->dev,
1588 "spi-rx-bus-width %d not supported\n",
1589 value);
1590 break;
1591 }
1592 }
1593
1594 if (spi_controller_is_slave(ctlr)) {
1595 if (strcmp(nc->name, "slave")) {
1596 dev_err(&ctlr->dev, "%pOF is not called 'slave'\n",
1597 nc);
1598 return -EINVAL;
1599 }
1600 return 0;
1601 }
1602
1603 /* Device address */
1604 rc = of_property_read_u32(nc, "reg", &value);
1605 if (rc) {
1606 dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
1607 nc, rc);
1608 return rc;
1609 }
1610 spi->chip_select = value;
1611
1612 /* Device speed */
1613 rc = of_property_read_u32(nc, "spi-max-frequency", &value);
1614 if (rc) {
1615 dev_err(&ctlr->dev,
1616 "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc);
1617 return rc;
1618 }
1619 spi->max_speed_hz = value;
1620
1621 return 0;
1622}
1623
1624static struct spi_device *
1625of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
1626{
1627 struct spi_device *spi;
1628 int rc;
1629
1630 /* Alloc an spi_device */
1631 spi = spi_alloc_device(ctlr);
1632 if (!spi) {
1633 dev_err(&ctlr->dev, "spi_device alloc error for %pOF\n", nc);
1634 rc = -ENOMEM;
1635 goto err_out;
1636 }
1637
1638 /* Select device driver */
1639 rc = of_modalias_node(nc, spi->modalias,
1640 sizeof(spi->modalias));
1641 if (rc < 0) {
1642 dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
1643 goto err_out;
1644 }
1645
1646 rc = of_spi_parse_dt(ctlr, spi, nc);
1647 if (rc)
1648 goto err_out;
1649
1650 /* Store a pointer to the node in the device structure */
1651 of_node_get(nc);
1652 spi->dev.of_node = nc;
1653
1654 /* Register the new device */
1655 rc = spi_add_device(spi);
1656 if (rc) {
1657 dev_err(&ctlr->dev, "spi_device register error %pOF\n", nc);
1658 goto err_of_node_put;
1659 }
1660
1661 return spi;
1662
1663err_of_node_put:
1664 of_node_put(nc);
1665err_out:
1666 spi_dev_put(spi);
1667 return ERR_PTR(rc);
1668}
1669
1670/**
1671 * of_register_spi_devices() - Register child devices onto the SPI bus
1672 * @ctlr: Pointer to spi_controller device
1673 *
1674 * Registers an spi_device for each child node of controller node which
1675 * represents a valid SPI slave.
1676 */
1677static void of_register_spi_devices(struct spi_controller *ctlr)
1678{
1679 struct spi_device *spi;
1680 struct device_node *nc;
1681
1682 if (!ctlr->dev.of_node)
1683 return;
1684
1685 for_each_available_child_of_node(ctlr->dev.of_node, nc) {
1686 if (of_node_test_and_set_flag(nc, OF_POPULATED))
1687 continue;
1688 spi = of_register_spi_device(ctlr, nc);
1689 if (IS_ERR(spi)) {
1690 dev_warn(&ctlr->dev,
1691 "Failed to create SPI device for %pOF\n", nc);
1692 of_node_clear_flag(nc, OF_POPULATED);
1693 }
1694 }
1695}
1696#else
1697static void of_register_spi_devices(struct spi_controller *ctlr) { }
1698#endif
1699
1700#ifdef CONFIG_ACPI
1701static void acpi_spi_parse_apple_properties(struct spi_device *spi)
1702{
1703 struct acpi_device *dev = ACPI_COMPANION(&spi->dev);
1704 const union acpi_object *obj;
1705
1706 if (!x86_apple_machine)
1707 return;
1708
1709 if (!acpi_dev_get_property(dev, "spiSclkPeriod", ACPI_TYPE_BUFFER, &obj)
1710 && obj->buffer.length >= 4)
1711 spi->max_speed_hz = NSEC_PER_SEC / *(u32 *)obj->buffer.pointer;
1712
1713 if (!acpi_dev_get_property(dev, "spiWordSize", ACPI_TYPE_BUFFER, &obj)
1714 && obj->buffer.length == 8)
1715 spi->bits_per_word = *(u64 *)obj->buffer.pointer;
1716
1717 if (!acpi_dev_get_property(dev, "spiBitOrder", ACPI_TYPE_BUFFER, &obj)
1718 && obj->buffer.length == 8 && !*(u64 *)obj->buffer.pointer)
1719 spi->mode |= SPI_LSB_FIRST;
1720
1721 if (!acpi_dev_get_property(dev, "spiSPO", ACPI_TYPE_BUFFER, &obj)
1722 && obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
1723 spi->mode |= SPI_CPOL;
1724
1725 if (!acpi_dev_get_property(dev, "spiSPH", ACPI_TYPE_BUFFER, &obj)
1726 && obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
1727 spi->mode |= SPI_CPHA;
1728}
1729
1730static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
1731{
1732 struct spi_device *spi = data;
1733 struct spi_controller *ctlr = spi->controller;
1734
1735 if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
1736 struct acpi_resource_spi_serialbus *sb;
1737
1738 sb = &ares->data.spi_serial_bus;
1739 if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
1740 /*
1741 * ACPI DeviceSelection numbering is handled by the
1742 * host controller driver in Windows and can vary
1743 * from driver to driver. In Linux we always expect
1744 * 0 .. max - 1 so we need to ask the driver to
1745 * translate between the two schemes.
1746 */
1747 if (ctlr->fw_translate_cs) {
1748 int cs = ctlr->fw_translate_cs(ctlr,
1749 sb->device_selection);
1750 if (cs < 0)
1751 return cs;
1752 spi->chip_select = cs;
1753 } else {
1754 spi->chip_select = sb->device_selection;
1755 }
1756
1757 spi->max_speed_hz = sb->connection_speed;
1758
1759 if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
1760 spi->mode |= SPI_CPHA;
1761 if (sb->clock_polarity == ACPI_SPI_START_HIGH)
1762 spi->mode |= SPI_CPOL;
1763 if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
1764 spi->mode |= SPI_CS_HIGH;
1765 }
1766 } else if (spi->irq < 0) {
1767 struct resource r;
1768
1769 if (acpi_dev_resource_interrupt(ares, 0, &r))
1770 spi->irq = r.start;
1771 }
1772
1773 /* Always tell the ACPI core to skip this resource */
1774 return 1;
1775}
1776
1777static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
1778 struct acpi_device *adev)
1779{
1780 struct list_head resource_list;
1781 struct spi_device *spi;
1782 int ret;
1783
1784 if (acpi_bus_get_status(adev) || !adev->status.present ||
1785 acpi_device_enumerated(adev))
1786 return AE_OK;
1787
1788 spi = spi_alloc_device(ctlr);
1789 if (!spi) {
1790 dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
1791 dev_name(&adev->dev));
1792 return AE_NO_MEMORY;
1793 }
1794
1795 ACPI_COMPANION_SET(&spi->dev, adev);
1796 spi->irq = -1;
1797
1798 INIT_LIST_HEAD(&resource_list);
1799 ret = acpi_dev_get_resources(adev, &resource_list,
1800 acpi_spi_add_resource, spi);
1801 acpi_dev_free_resource_list(&resource_list);
1802
1803 acpi_spi_parse_apple_properties(spi);
1804
1805 if (ret < 0 || !spi->max_speed_hz) {
1806 spi_dev_put(spi);
1807 return AE_OK;
1808 }
1809
1810 acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
1811 sizeof(spi->modalias));
1812
1813 if (spi->irq < 0)
1814 spi->irq = acpi_dev_gpio_irq_get(adev, 0);
1815
1816 acpi_device_set_enumerated(adev);
1817
1818 adev->power.flags.ignore_parent = true;
1819 if (spi_add_device(spi)) {
1820 adev->power.flags.ignore_parent = false;
1821 dev_err(&ctlr->dev, "failed to add SPI device %s from ACPI\n",
1822 dev_name(&adev->dev));
1823 spi_dev_put(spi);
1824 }
1825
1826 return AE_OK;
1827}
1828
1829static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
1830 void *data, void **return_value)
1831{
1832 struct spi_controller *ctlr = data;
1833 struct acpi_device *adev;
1834
1835 if (acpi_bus_get_device(handle, &adev))
1836 return AE_OK;
1837
1838 return acpi_register_spi_device(ctlr, adev);
1839}
1840
1841static void acpi_register_spi_devices(struct spi_controller *ctlr)
1842{
1843 acpi_status status;
1844 acpi_handle handle;
1845
1846 handle = ACPI_HANDLE(ctlr->dev.parent);
1847 if (!handle)
1848 return;
1849
1850 status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
1851 acpi_spi_add_device, NULL, ctlr, NULL);
1852 if (ACPI_FAILURE(status))
1853 dev_warn(&ctlr->dev, "failed to enumerate SPI slaves\n");
1854}
1855#else
1856static inline void acpi_register_spi_devices(struct spi_controller *ctlr) {}
1857#endif /* CONFIG_ACPI */
1858
1859static void spi_controller_release(struct device *dev)
1860{
1861 struct spi_controller *ctlr;
1862
1863 ctlr = container_of(dev, struct spi_controller, dev);
1864 kfree(ctlr);
1865}
1866
1867static struct class spi_master_class = {
1868 .name = "spi_master",
1869 .owner = THIS_MODULE,
1870 .dev_release = spi_controller_release,
1871 .dev_groups = spi_master_groups,
1872};
1873
1874#ifdef CONFIG_SPI_SLAVE
1875/**
1876 * spi_slave_abort - abort the ongoing transfer request on an SPI slave
1877 * controller
1878 * @spi: device used for the current transfer
1879 */
1880int spi_slave_abort(struct spi_device *spi)
1881{
1882 struct spi_controller *ctlr = spi->controller;
1883
1884 if (spi_controller_is_slave(ctlr) && ctlr->slave_abort)
1885 return ctlr->slave_abort(ctlr);
1886
1887 return -ENOTSUPP;
1888}
1889EXPORT_SYMBOL_GPL(spi_slave_abort);
1890
1891static int match_true(struct device *dev, void *data)
1892{
1893 return 1;
1894}
1895
1896static ssize_t spi_slave_show(struct device *dev,
1897 struct device_attribute *attr, char *buf)
1898{
1899 struct spi_controller *ctlr = container_of(dev, struct spi_controller,
1900 dev);
1901 struct device *child;
1902
1903 child = device_find_child(&ctlr->dev, NULL, match_true);
1904 return sprintf(buf, "%s\n",
1905 child ? to_spi_device(child)->modalias : NULL);
1906}
1907
1908static ssize_t spi_slave_store(struct device *dev,
1909 struct device_attribute *attr, const char *buf,
1910 size_t count)
1911{
1912 struct spi_controller *ctlr = container_of(dev, struct spi_controller,
1913 dev);
1914 struct spi_device *spi;
1915 struct device *child;
1916 char name[32];
1917 int rc;
1918
1919 rc = sscanf(buf, "%31s", name);
1920 if (rc != 1 || !name[0])
1921 return -EINVAL;
1922
1923 child = device_find_child(&ctlr->dev, NULL, match_true);
1924 if (child) {
1925 /* Remove registered slave */
1926 device_unregister(child);
1927 put_device(child);
1928 }
1929
1930 if (strcmp(name, "(null)")) {
1931 /* Register new slave */
1932 spi = spi_alloc_device(ctlr);
1933 if (!spi)
1934 return -ENOMEM;
1935
1936 strlcpy(spi->modalias, name, sizeof(spi->modalias));
1937
1938 rc = spi_add_device(spi);
1939 if (rc) {
1940 spi_dev_put(spi);
1941 return rc;
1942 }
1943 }
1944
1945 return count;
1946}
1947
1948static DEVICE_ATTR(slave, 0644, spi_slave_show, spi_slave_store);
1949
1950static struct attribute *spi_slave_attrs[] = {
1951 &dev_attr_slave.attr,
1952 NULL,
1953};
1954
1955static const struct attribute_group spi_slave_group = {
1956 .attrs = spi_slave_attrs,
1957};
1958
1959static const struct attribute_group *spi_slave_groups[] = {
1960 &spi_controller_statistics_group,
1961 &spi_slave_group,
1962 NULL,
1963};
1964
1965static struct class spi_slave_class = {
1966 .name = "spi_slave",
1967 .owner = THIS_MODULE,
1968 .dev_release = spi_controller_release,
1969 .dev_groups = spi_slave_groups,
1970};
1971#else
1972extern struct class spi_slave_class; /* dummy */
1973#endif
1974
1975/**
1976 * __spi_alloc_controller - allocate an SPI master or slave controller
1977 * @dev: the controller, possibly using the platform_bus
1978 * @size: how much zeroed driver-private data to allocate; the pointer to this
1979 * memory is in the driver_data field of the returned device,
1980 * accessible with spi_controller_get_devdata().
1981 * @slave: flag indicating whether to allocate an SPI master (false) or SPI
1982 * slave (true) controller
1983 * Context: can sleep
1984 *
1985 * This call is used only by SPI controller drivers, which are the
1986 * only ones directly touching chip registers. It's how they allocate
1987 * an spi_controller structure, prior to calling spi_register_controller().
1988 *
1989 * This must be called from context that can sleep.
1990 *
1991 * The caller is responsible for assigning the bus number and initializing the
1992 * controller's methods before calling spi_register_controller(); and (after
1993 * errors adding the device) calling spi_controller_put() to prevent a memory
1994 * leak.
1995 *
1996 * Return: the SPI controller structure on success, else NULL.
1997 */
1998struct spi_controller *__spi_alloc_controller(struct device *dev,
1999 unsigned int size, bool slave)
2000{
2001 struct spi_controller *ctlr;
2002
2003 if (!dev)
2004 return NULL;
2005
2006 ctlr = kzalloc(size + sizeof(*ctlr), GFP_KERNEL);
2007 if (!ctlr)
2008 return NULL;
2009
2010 device_initialize(&ctlr->dev);
2011 ctlr->bus_num = -1;
2012 ctlr->num_chipselect = 1;
2013 ctlr->slave = slave;
2014 if (IS_ENABLED(CONFIG_SPI_SLAVE) && slave)
2015 ctlr->dev.class = &spi_slave_class;
2016 else
2017 ctlr->dev.class = &spi_master_class;
2018 ctlr->dev.parent = dev;
2019 pm_suspend_ignore_children(&ctlr->dev, true);
2020 spi_controller_set_devdata(ctlr, &ctlr[1]);
2021
2022 return ctlr;
2023}
2024EXPORT_SYMBOL_GPL(__spi_alloc_controller);
2025
2026#ifdef CONFIG_OF
2027static int of_spi_register_master(struct spi_controller *ctlr)
2028{
2029 int nb, i, *cs;
2030 struct device_node *np = ctlr->dev.of_node;
2031
2032 if (!np)
2033 return 0;
2034
2035 nb = of_gpio_named_count(np, "cs-gpios");
2036 ctlr->num_chipselect = max_t(int, nb, ctlr->num_chipselect);
2037
2038 /* Return error only for an incorrectly formed cs-gpios property */
2039 if (nb == 0 || nb == -ENOENT)
2040 return 0;
2041 else if (nb < 0)
2042 return nb;
2043
2044 cs = devm_kzalloc(&ctlr->dev, sizeof(int) * ctlr->num_chipselect,
2045 GFP_KERNEL);
2046 ctlr->cs_gpios = cs;
2047
2048 if (!ctlr->cs_gpios)
2049 return -ENOMEM;
2050
2051 for (i = 0; i < ctlr->num_chipselect; i++)
2052 cs[i] = -ENOENT;
2053
2054 for (i = 0; i < nb; i++)
2055 cs[i] = of_get_named_gpio(np, "cs-gpios", i);
2056
2057 return 0;
2058}
2059#else
2060static int of_spi_register_master(struct spi_controller *ctlr)
2061{
2062 return 0;
2063}
2064#endif
2065
2066/**
2067 * spi_register_controller - register SPI master or slave controller
2068 * @ctlr: initialized master, originally from spi_alloc_master() or
2069 * spi_alloc_slave()
2070 * Context: can sleep
2071 *
2072 * SPI controllers connect to their drivers using some non-SPI bus,
2073 * such as the platform bus. The final stage of probe() in that code
2074 * includes calling spi_register_controller() to hook up to this SPI bus glue.
2075 *
2076 * SPI controllers use board specific (often SOC specific) bus numbers,
2077 * and board-specific addressing for SPI devices combines those numbers
2078 * with chip select numbers. Since SPI does not directly support dynamic
2079 * device identification, boards need configuration tables telling which
2080 * chip is at which address.
2081 *
2082 * This must be called from context that can sleep. It returns zero on
2083 * success, else a negative error code (dropping the controller's refcount).
2084 * After a successful return, the caller is responsible for calling
2085 * spi_unregister_controller().
2086 *
2087 * Return: zero on success, else a negative error code.
2088 */
2089int spi_register_controller(struct spi_controller *ctlr)
2090{
2091 struct device *dev = ctlr->dev.parent;
2092 struct boardinfo *bi;
2093 int status = -ENODEV;
2094 int id, first_dynamic;
2095
2096 if (!dev)
2097 return -ENODEV;
2098
2099 if (!spi_controller_is_slave(ctlr)) {
2100 status = of_spi_register_master(ctlr);
2101 if (status)
2102 return status;
2103 }
2104
2105 /* even if it's just one always-selected device, there must
2106 * be at least one chipselect
2107 */
2108 if (ctlr->num_chipselect == 0)
2109 return -EINVAL;
2110 /* allocate dynamic bus number using Linux idr */
2111 if ((ctlr->bus_num < 0) && ctlr->dev.of_node) {
2112 id = of_alias_get_id(ctlr->dev.of_node, "spi");
2113 if (id >= 0) {
2114 ctlr->bus_num = id;
2115 mutex_lock(&board_lock);
2116 id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
2117 ctlr->bus_num + 1, GFP_KERNEL);
2118 mutex_unlock(&board_lock);
2119 if (WARN(id < 0, "couldn't get idr"))
2120 return id == -ENOSPC ? -EBUSY : id;
2121 }
2122 }
2123 if (ctlr->bus_num < 0) {
2124 first_dynamic = of_alias_get_highest_id("spi");
2125 if (first_dynamic < 0)
2126 first_dynamic = 0;
2127 else
2128 first_dynamic++;
2129
2130 mutex_lock(&board_lock);
2131 id = idr_alloc(&spi_master_idr, ctlr, first_dynamic,
2132 0, GFP_KERNEL);
2133 mutex_unlock(&board_lock);
2134 if (WARN(id < 0, "couldn't get idr"))
2135 return id;
2136 ctlr->bus_num = id;
2137 }
2138 INIT_LIST_HEAD(&ctlr->queue);
2139 spin_lock_init(&ctlr->queue_lock);
2140 spin_lock_init(&ctlr->bus_lock_spinlock);
2141 mutex_init(&ctlr->bus_lock_mutex);
2142 mutex_init(&ctlr->io_mutex);
2143 ctlr->bus_lock_flag = 0;
2144 init_completion(&ctlr->xfer_completion);
2145 if (!ctlr->max_dma_len)
2146 ctlr->max_dma_len = INT_MAX;
2147
2148 /* register the device, then userspace will see it.
2149 * registration fails if the bus ID is in use.
2150 */
2151 dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
2152 status = device_add(&ctlr->dev);
2153 if (status < 0) {
2154 /* free bus id */
2155 mutex_lock(&board_lock);
2156 idr_remove(&spi_master_idr, ctlr->bus_num);
2157 mutex_unlock(&board_lock);
2158 goto done;
2159 }
2160 dev_dbg(dev, "registered %s %s\n",
2161 spi_controller_is_slave(ctlr) ? "slave" : "master",
2162 dev_name(&ctlr->dev));
2163
2164 /* If we're using a queued driver, start the queue */
2165 if (ctlr->transfer)
2166 dev_info(dev, "controller is unqueued, this is deprecated\n");
2167 else {
2168 status = spi_controller_initialize_queue(ctlr);
2169 if (status) {
2170 device_del(&ctlr->dev);
2171 /* free bus id */
2172 mutex_lock(&board_lock);
2173 idr_remove(&spi_master_idr, ctlr->bus_num);
2174 mutex_unlock(&board_lock);
2175 goto done;
2176 }
2177 }
2178 /* add statistics */
2179 spin_lock_init(&ctlr->statistics.lock);
2180
2181 mutex_lock(&board_lock);
2182 list_add_tail(&ctlr->list, &spi_controller_list);
2183 list_for_each_entry(bi, &board_list, list)
2184 spi_match_controller_to_boardinfo(ctlr, &bi->board_info);
2185 mutex_unlock(&board_lock);
2186
2187 /* Register devices from the device tree and ACPI */
2188 of_register_spi_devices(ctlr);
2189 acpi_register_spi_devices(ctlr);
2190done:
2191 return status;
2192}
2193EXPORT_SYMBOL_GPL(spi_register_controller);
2194
2195static void devm_spi_unregister(struct device *dev, void *res)
2196{
2197 spi_unregister_controller(*(struct spi_controller **)res);
2198}
2199
2200/**
2201 * devm_spi_register_controller - register managed SPI master or slave
2202 * controller
2203 * @dev: device managing SPI controller
2204 * @ctlr: initialized controller, originally from spi_alloc_master() or
2205 * spi_alloc_slave()
2206 * Context: can sleep
2207 *
2208 * Register a SPI device as with spi_register_controller() which will
2209 * automatically be unregistered and freed.
2210 *
2211 * Return: zero on success, else a negative error code.
2212 */
2213int devm_spi_register_controller(struct device *dev,
2214 struct spi_controller *ctlr)
2215{
2216 struct spi_controller **ptr;
2217 int ret;
2218
2219 ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
2220 if (!ptr)
2221 return -ENOMEM;
2222
2223 ret = spi_register_controller(ctlr);
2224 if (!ret) {
2225 *ptr = ctlr;
2226 devres_add(dev, ptr);
2227 } else {
2228 devres_free(ptr);
2229 }
2230
2231 return ret;
2232}
2233EXPORT_SYMBOL_GPL(devm_spi_register_controller);
2234
2235static int __unregister(struct device *dev, void *null)
2236{
2237 spi_unregister_device(to_spi_device(dev));
2238 return 0;
2239}
2240
2241/**
2242 * spi_unregister_controller - unregister SPI master or slave controller
2243 * @ctlr: the controller being unregistered
2244 * Context: can sleep
2245 *
2246 * This call is used only by SPI controller drivers, which are the
2247 * only ones directly touching chip registers.
2248 *
2249 * This must be called from context that can sleep.
2250 *
2251 * Note that this function also drops a reference to the controller.
2252 */
2253void spi_unregister_controller(struct spi_controller *ctlr)
2254{
2255 struct spi_controller *found;
2256 int id = ctlr->bus_num;
2257 int dummy;
2258
2259 /* First make sure that this controller was ever added */
2260 mutex_lock(&board_lock);
2261 found = idr_find(&spi_master_idr, id);
2262 mutex_unlock(&board_lock);
2263 if (ctlr->queued) {
2264 if (spi_destroy_queue(ctlr))
2265 dev_err(&ctlr->dev, "queue remove failed\n");
2266 }
2267 mutex_lock(&board_lock);
2268 list_del(&ctlr->list);
2269 mutex_unlock(&board_lock);
2270
2271 dummy = device_for_each_child(&ctlr->dev, NULL, __unregister);
2272 device_unregister(&ctlr->dev);
2273 /* free bus id */
2274 mutex_lock(&board_lock);
2275 if (found == ctlr)
2276 idr_remove(&spi_master_idr, id);
2277 mutex_unlock(&board_lock);
2278}
2279EXPORT_SYMBOL_GPL(spi_unregister_controller);
2280
2281int spi_controller_suspend(struct spi_controller *ctlr)
2282{
2283 int ret;
2284
2285 /* Basically no-ops for non-queued controllers */
2286 if (!ctlr->queued)
2287 return 0;
2288
2289 ret = spi_stop_queue(ctlr);
2290 if (ret)
2291 dev_err(&ctlr->dev, "queue stop failed\n");
2292
2293 return ret;
2294}
2295EXPORT_SYMBOL_GPL(spi_controller_suspend);
2296
2297int spi_controller_resume(struct spi_controller *ctlr)
2298{
2299 int ret;
2300
2301 if (!ctlr->queued)
2302 return 0;
2303
2304 ret = spi_start_queue(ctlr);
2305 if (ret)
2306 dev_err(&ctlr->dev, "queue restart failed\n");
2307
2308 return ret;
2309}
2310EXPORT_SYMBOL_GPL(spi_controller_resume);
2311
2312static int __spi_controller_match(struct device *dev, const void *data)
2313{
2314 struct spi_controller *ctlr;
2315 const u16 *bus_num = data;
2316
2317 ctlr = container_of(dev, struct spi_controller, dev);
2318 return ctlr->bus_num == *bus_num;
2319}
2320
2321/**
2322 * spi_busnum_to_master - look up master associated with bus_num
2323 * @bus_num: the master's bus number
2324 * Context: can sleep
2325 *
2326 * This call may be used with devices that are registered after
2327 * arch init time. It returns a refcounted pointer to the relevant
2328 * spi_controller (which the caller must release), or NULL if there is
2329 * no such master registered.
2330 *
2331 * Return: the SPI master structure on success, else NULL.
2332 */
2333struct spi_controller *spi_busnum_to_master(u16 bus_num)
2334{
2335 struct device *dev;
2336 struct spi_controller *ctlr = NULL;
2337
2338 dev = class_find_device(&spi_master_class, NULL, &bus_num,
2339 __spi_controller_match);
2340 if (dev)
2341 ctlr = container_of(dev, struct spi_controller, dev);
2342 /* reference got in class_find_device */
2343 return ctlr;
2344}
2345EXPORT_SYMBOL_GPL(spi_busnum_to_master);
2346
2347/*-------------------------------------------------------------------------*/
2348
2349/* Core methods for SPI resource management */
2350
2351/**
2352 * spi_res_alloc - allocate a spi resource that is life-cycle managed
2353 * during the processing of a spi_message while using
2354 * spi_transfer_one
2355 * @spi: the spi device for which we allocate memory
2356 * @release: the release code to execute for this resource
2357 * @size: size to alloc and return
2358 * @gfp: GFP allocation flags
2359 *
2360 * Return: the pointer to the allocated data
2361 *
2362 * This may get enhanced in the future to allocate from a memory pool
2363 * of the @spi_device or @spi_controller to avoid repeated allocations.
2364 */
2365void *spi_res_alloc(struct spi_device *spi,
2366 spi_res_release_t release,
2367 size_t size, gfp_t gfp)
2368{
2369 struct spi_res *sres;
2370
2371 sres = kzalloc(sizeof(*sres) + size, gfp);
2372 if (!sres)
2373 return NULL;
2374
2375 INIT_LIST_HEAD(&sres->entry);
2376 sres->release = release;
2377
2378 return sres->data;
2379}
2380EXPORT_SYMBOL_GPL(spi_res_alloc);
2381
2382/**
2383 * spi_res_free - free an spi resource
2384 * @res: pointer to the custom data of a resource
2385 *
2386 */
2387void spi_res_free(void *res)
2388{
2389 struct spi_res *sres = container_of(res, struct spi_res, data);
2390
2391 if (!res)
2392 return;
2393
2394 WARN_ON(!list_empty(&sres->entry));
2395 kfree(sres);
2396}
2397EXPORT_SYMBOL_GPL(spi_res_free);
2398
2399/**
2400 * spi_res_add - add a spi_res to the spi_message
2401 * @message: the spi message
2402 * @res: the spi_resource
2403 */
2404void spi_res_add(struct spi_message *message, void *res)
2405{
2406 struct spi_res *sres = container_of(res, struct spi_res, data);
2407
2408 WARN_ON(!list_empty(&sres->entry));
2409 list_add_tail(&sres->entry, &message->resources);
2410}
2411EXPORT_SYMBOL_GPL(spi_res_add);
2412
2413/**
2414 * spi_res_release - release all spi resources for this message
2415 * @ctlr: the @spi_controller
2416 * @message: the @spi_message
2417 */
2418void spi_res_release(struct spi_controller *ctlr, struct spi_message *message)
2419{
2420 struct spi_res *res;
2421
2422 while (!list_empty(&message->resources)) {
2423 res = list_last_entry(&message->resources,
2424 struct spi_res, entry);
2425
2426 if (res->release)
2427 res->release(ctlr, message, res->data);
2428
2429 list_del(&res->entry);
2430
2431 kfree(res);
2432 }
2433}
2434EXPORT_SYMBOL_GPL(spi_res_release);
2435
2436/*-------------------------------------------------------------------------*/
2437
2438/* Core methods for spi_message alterations */
2439
2440static void __spi_replace_transfers_release(struct spi_controller *ctlr,
2441 struct spi_message *msg,
2442 void *res)
2443{
2444 struct spi_replaced_transfers *rxfer = res;
2445 size_t i;
2446
2447 /* call extra callback if requested */
2448 if (rxfer->release)
2449 rxfer->release(ctlr, msg, res);
2450
2451 /* insert replaced transfers back into the message */
2452 list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
2453
2454 /* remove the formerly inserted entries */
2455 for (i = 0; i < rxfer->inserted; i++)
2456 list_del(&rxfer->inserted_transfers[i].transfer_list);
2457}
2458
2459/**
2460 * spi_replace_transfers - replace transfers with several transfers
2461 * and register change with spi_message.resources
2462 * @msg: the spi_message we work upon
2463 * @xfer_first: the first spi_transfer we want to replace
2464 * @remove: number of transfers to remove
2465 * @insert: the number of transfers we want to insert instead
2466 * @release: extra release code necessary in some circumstances
2467 * @extradatasize: extra data to allocate (with alignment guarantees
2468 * of struct @spi_transfer)
2469 * @gfp: gfp flags
2470 *
2471 * Returns: pointer to @spi_replaced_transfers,
2472 * PTR_ERR(...) in case of errors.
2473 */
2474struct spi_replaced_transfers *spi_replace_transfers(
2475 struct spi_message *msg,
2476 struct spi_transfer *xfer_first,
2477 size_t remove,
2478 size_t insert,
2479 spi_replaced_release_t release,
2480 size_t extradatasize,
2481 gfp_t gfp)
2482{
2483 struct spi_replaced_transfers *rxfer;
2484 struct spi_transfer *xfer;
2485 size_t i;
2486
2487 /* allocate the structure using spi_res */
2488 rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
2489 insert * sizeof(struct spi_transfer)
2490 + sizeof(struct spi_replaced_transfers)
2491 + extradatasize,
2492 gfp);
2493 if (!rxfer)
2494 return ERR_PTR(-ENOMEM);
2495
2496 /* the release code to invoke before running the generic release */
2497 rxfer->release = release;
2498
2499 /* assign extradata */
2500 if (extradatasize)
2501 rxfer->extradata =
2502 &rxfer->inserted_transfers[insert];
2503
2504 /* init the replaced_transfers list */
2505 INIT_LIST_HEAD(&rxfer->replaced_transfers);
2506
2507 /* assign the list_entry after which we should reinsert
2508 * the @replaced_transfers - it may be spi_message.messages!
2509 */
2510 rxfer->replaced_after = xfer_first->transfer_list.prev;
2511
2512 /* remove the requested number of transfers */
2513 for (i = 0; i < remove; i++) {
2514 /* if the entry after replaced_after it is msg->transfers
2515 * then we have been requested to remove more transfers
2516 * than are in the list
2517 */
2518 if (rxfer->replaced_after->next == &msg->transfers) {
2519 dev_err(&msg->spi->dev,
2520 "requested to remove more spi_transfers than are available\n");
2521 /* insert replaced transfers back into the message */
2522 list_splice(&rxfer->replaced_transfers,
2523 rxfer->replaced_after);
2524
2525 /* free the spi_replace_transfer structure */
2526 spi_res_free(rxfer);
2527
2528 /* and return with an error */
2529 return ERR_PTR(-EINVAL);
2530 }
2531
2532 /* remove the entry after replaced_after from list of
2533 * transfers and add it to list of replaced_transfers
2534 */
2535 list_move_tail(rxfer->replaced_after->next,
2536 &rxfer->replaced_transfers);
2537 }
2538
2539 /* create copy of the given xfer with identical settings
2540 * based on the first transfer to get removed
2541 */
2542 for (i = 0; i < insert; i++) {
2543 /* we need to run in reverse order */
2544 xfer = &rxfer->inserted_transfers[insert - 1 - i];
2545
2546 /* copy all spi_transfer data */
2547 memcpy(xfer, xfer_first, sizeof(*xfer));
2548
2549 /* add to list */
2550 list_add(&xfer->transfer_list, rxfer->replaced_after);
2551
2552 /* clear cs_change and delay_usecs for all but the last */
2553 if (i) {
2554 xfer->cs_change = false;
2555 xfer->delay_usecs = 0;
2556 }
2557 }
2558
2559 /* set up inserted */
2560 rxfer->inserted = insert;
2561
2562 /* and register it with spi_res/spi_message */
2563 spi_res_add(msg, rxfer);
2564
2565 return rxfer;
2566}
2567EXPORT_SYMBOL_GPL(spi_replace_transfers);
2568
2569static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
2570 struct spi_message *msg,
2571 struct spi_transfer **xferp,
2572 size_t maxsize,
2573 gfp_t gfp)
2574{
2575 struct spi_transfer *xfer = *xferp, *xfers;
2576 struct spi_replaced_transfers *srt;
2577 size_t offset;
2578 size_t count, i;
2579
2580 /* warn once about this fact that we are splitting a transfer */
2581 dev_warn_once(&msg->spi->dev,
2582 "spi_transfer of length %i exceed max length of %zu - needed to split transfers\n",
2583 xfer->len, maxsize);
2584
2585 /* calculate how many we have to replace */
2586 count = DIV_ROUND_UP(xfer->len, maxsize);
2587
2588 /* create replacement */
2589 srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
2590 if (IS_ERR(srt))
2591 return PTR_ERR(srt);
2592 xfers = srt->inserted_transfers;
2593
2594 /* now handle each of those newly inserted spi_transfers
2595 * note that the replacements spi_transfers all are preset
2596 * to the same values as *xferp, so tx_buf, rx_buf and len
2597 * are all identical (as well as most others)
2598 * so we just have to fix up len and the pointers.
2599 *
2600 * this also includes support for the depreciated
2601 * spi_message.is_dma_mapped interface
2602 */
2603
2604 /* the first transfer just needs the length modified, so we
2605 * run it outside the loop
2606 */
2607 xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
2608
2609 /* all the others need rx_buf/tx_buf also set */
2610 for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
2611 /* update rx_buf, tx_buf and dma */
2612 if (xfers[i].rx_buf)
2613 xfers[i].rx_buf += offset;
2614 if (xfers[i].rx_dma)
2615 xfers[i].rx_dma += offset;
2616 if (xfers[i].tx_buf)
2617 xfers[i].tx_buf += offset;
2618 if (xfers[i].tx_dma)
2619 xfers[i].tx_dma += offset;
2620
2621 /* update length */
2622 xfers[i].len = min(maxsize, xfers[i].len - offset);
2623 }
2624
2625 /* we set up xferp to the last entry we have inserted,
2626 * so that we skip those already split transfers
2627 */
2628 *xferp = &xfers[count - 1];
2629
2630 /* increment statistics counters */
2631 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
2632 transfers_split_maxsize);
2633 SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics,
2634 transfers_split_maxsize);
2635
2636 return 0;
2637}
2638
2639/**
2640 * spi_split_tranfers_maxsize - split spi transfers into multiple transfers
2641 * when an individual transfer exceeds a
2642 * certain size
2643 * @ctlr: the @spi_controller for this transfer
2644 * @msg: the @spi_message to transform
2645 * @maxsize: the maximum when to apply this
2646 * @gfp: GFP allocation flags
2647 *
2648 * Return: status of transformation
2649 */
2650int spi_split_transfers_maxsize(struct spi_controller *ctlr,
2651 struct spi_message *msg,
2652 size_t maxsize,
2653 gfp_t gfp)
2654{
2655 struct spi_transfer *xfer;
2656 int ret;
2657
2658 /* iterate over the transfer_list,
2659 * but note that xfer is advanced to the last transfer inserted
2660 * to avoid checking sizes again unnecessarily (also xfer does
2661 * potentiall belong to a different list by the time the
2662 * replacement has happened
2663 */
2664 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
2665 if (xfer->len > maxsize) {
2666 ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
2667 maxsize, gfp);
2668 if (ret)
2669 return ret;
2670 }
2671 }
2672
2673 return 0;
2674}
2675EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
2676
2677/*-------------------------------------------------------------------------*/
2678
2679/* Core methods for SPI controller protocol drivers. Some of the
2680 * other core methods are currently defined as inline functions.
2681 */
2682
2683static int __spi_validate_bits_per_word(struct spi_controller *ctlr,
2684 u8 bits_per_word)
2685{
2686 if (ctlr->bits_per_word_mask) {
2687 /* Only 32 bits fit in the mask */
2688 if (bits_per_word > 32)
2689 return -EINVAL;
2690 if (!(ctlr->bits_per_word_mask & SPI_BPW_MASK(bits_per_word)))
2691 return -EINVAL;
2692 }
2693
2694 return 0;
2695}
2696
2697/**
2698 * spi_setup - setup SPI mode and clock rate
2699 * @spi: the device whose settings are being modified
2700 * Context: can sleep, and no requests are queued to the device
2701 *
2702 * SPI protocol drivers may need to update the transfer mode if the
2703 * device doesn't work with its default. They may likewise need
2704 * to update clock rates or word sizes from initial values. This function
2705 * changes those settings, and must be called from a context that can sleep.
2706 * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
2707 * effect the next time the device is selected and data is transferred to
2708 * or from it. When this function returns, the spi device is deselected.
2709 *
2710 * Note that this call will fail if the protocol driver specifies an option
2711 * that the underlying controller or its driver does not support. For
2712 * example, not all hardware supports wire transfers using nine bit words,
2713 * LSB-first wire encoding, or active-high chipselects.
2714 *
2715 * Return: zero on success, else a negative error code.
2716 */
2717int spi_setup(struct spi_device *spi)
2718{
2719 unsigned bad_bits, ugly_bits;
2720 int status;
2721
2722 /* check mode to prevent that DUAL and QUAD set at the same time
2723 */
2724 if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
2725 ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
2726 dev_err(&spi->dev,
2727 "setup: can not select dual and quad at the same time\n");
2728 return -EINVAL;
2729 }
2730 /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
2731 */
2732 if ((spi->mode & SPI_3WIRE) && (spi->mode &
2733 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
2734 return -EINVAL;
2735 /* help drivers fail *cleanly* when they need options
2736 * that aren't supported with their current controller
2737 */
2738 bad_bits = spi->mode & ~spi->controller->mode_bits;
2739 ugly_bits = bad_bits &
2740 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
2741 if (ugly_bits) {
2742 dev_warn(&spi->dev,
2743 "setup: ignoring unsupported mode bits %x\n",
2744 ugly_bits);
2745 spi->mode &= ~ugly_bits;
2746 bad_bits &= ~ugly_bits;
2747 }
2748 if (bad_bits) {
2749 dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
2750 bad_bits);
2751 return -EINVAL;
2752 }
2753
2754 if (!spi->bits_per_word)
2755 spi->bits_per_word = 8;
2756
2757 status = __spi_validate_bits_per_word(spi->controller,
2758 spi->bits_per_word);
2759 if (status)
2760 return status;
2761
2762 if (!spi->max_speed_hz)
2763 spi->max_speed_hz = spi->controller->max_speed_hz;
2764
2765 if (spi->controller->setup)
2766 status = spi->controller->setup(spi);
2767
2768 spi_set_cs(spi, false);
2769
2770 dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
2771 (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
2772 (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
2773 (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
2774 (spi->mode & SPI_3WIRE) ? "3wire, " : "",
2775 (spi->mode & SPI_LOOP) ? "loopback, " : "",
2776 spi->bits_per_word, spi->max_speed_hz,
2777 status);
2778
2779 return status;
2780}
2781EXPORT_SYMBOL_GPL(spi_setup);
2782
2783static int __spi_validate(struct spi_device *spi, struct spi_message *message)
2784{
2785 struct spi_controller *ctlr = spi->controller;
2786 struct spi_transfer *xfer;
2787 int w_size;
2788
2789 if (list_empty(&message->transfers))
2790 return -EINVAL;
2791
2792 /* Half-duplex links include original MicroWire, and ones with
2793 * only one data pin like SPI_3WIRE (switches direction) or where
2794 * either MOSI or MISO is missing. They can also be caused by
2795 * software limitations.
2796 */
2797 if ((ctlr->flags & SPI_CONTROLLER_HALF_DUPLEX) ||
2798 (spi->mode & SPI_3WIRE)) {
2799 unsigned flags = ctlr->flags;
2800
2801 list_for_each_entry(xfer, &message->transfers, transfer_list) {
2802 if (xfer->rx_buf && xfer->tx_buf)
2803 return -EINVAL;
2804 if ((flags & SPI_CONTROLLER_NO_TX) && xfer->tx_buf)
2805 return -EINVAL;
2806 if ((flags & SPI_CONTROLLER_NO_RX) && xfer->rx_buf)
2807 return -EINVAL;
2808 }
2809 }
2810
2811 /**
2812 * Set transfer bits_per_word and max speed as spi device default if
2813 * it is not set for this transfer.
2814 * Set transfer tx_nbits and rx_nbits as single transfer default
2815 * (SPI_NBITS_SINGLE) if it is not set for this transfer.
2816 */
2817 message->frame_length = 0;
2818 list_for_each_entry(xfer, &message->transfers, transfer_list) {
2819 message->frame_length += xfer->len;
2820 if (!xfer->bits_per_word)
2821 xfer->bits_per_word = spi->bits_per_word;
2822
2823 if (!xfer->speed_hz)
2824 xfer->speed_hz = spi->max_speed_hz;
2825 if (!xfer->speed_hz)
2826 xfer->speed_hz = ctlr->max_speed_hz;
2827
2828 if (ctlr->max_speed_hz && xfer->speed_hz > ctlr->max_speed_hz)
2829 xfer->speed_hz = ctlr->max_speed_hz;
2830
2831 if (__spi_validate_bits_per_word(ctlr, xfer->bits_per_word))
2832 return -EINVAL;
2833
2834 /*
2835 * SPI transfer length should be multiple of SPI word size
2836 * where SPI word size should be power-of-two multiple
2837 */
2838 if (xfer->bits_per_word <= 8)
2839 w_size = 1;
2840 else if (xfer->bits_per_word <= 16)
2841 w_size = 2;
2842 else
2843 w_size = 4;
2844
2845 /* No partial transfers accepted */
2846 if (xfer->len % w_size)
2847 return -EINVAL;
2848
2849 if (xfer->speed_hz && ctlr->min_speed_hz &&
2850 xfer->speed_hz < ctlr->min_speed_hz)
2851 return -EINVAL;
2852
2853 if (xfer->tx_buf && !xfer->tx_nbits)
2854 xfer->tx_nbits = SPI_NBITS_SINGLE;
2855 if (xfer->rx_buf && !xfer->rx_nbits)
2856 xfer->rx_nbits = SPI_NBITS_SINGLE;
2857 /* check transfer tx/rx_nbits:
2858 * 1. check the value matches one of single, dual and quad
2859 * 2. check tx/rx_nbits match the mode in spi_device
2860 */
2861 if (xfer->tx_buf) {
2862 if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
2863 xfer->tx_nbits != SPI_NBITS_DUAL &&
2864 xfer->tx_nbits != SPI_NBITS_QUAD)
2865 return -EINVAL;
2866 if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
2867 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
2868 return -EINVAL;
2869 if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
2870 !(spi->mode & SPI_TX_QUAD))
2871 return -EINVAL;
2872 }
2873 /* check transfer rx_nbits */
2874 if (xfer->rx_buf) {
2875 if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
2876 xfer->rx_nbits != SPI_NBITS_DUAL &&
2877 xfer->rx_nbits != SPI_NBITS_QUAD)
2878 return -EINVAL;
2879 if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
2880 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
2881 return -EINVAL;
2882 if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
2883 !(spi->mode & SPI_RX_QUAD))
2884 return -EINVAL;
2885 }
2886 }
2887
2888 message->status = -EINPROGRESS;
2889
2890 return 0;
2891}
2892
2893static int __spi_async(struct spi_device *spi, struct spi_message *message)
2894{
2895 struct spi_controller *ctlr = spi->controller;
2896
2897 message->spi = spi;
2898
2899 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_async);
2900 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_async);
2901
2902 trace_spi_message_submit(message);
2903
2904 return ctlr->transfer(spi, message);
2905}
2906
2907/**
2908 * spi_async - asynchronous SPI transfer
2909 * @spi: device with which data will be exchanged
2910 * @message: describes the data transfers, including completion callback
2911 * Context: any (irqs may be blocked, etc)
2912 *
2913 * This call may be used in_irq and other contexts which can't sleep,
2914 * as well as from task contexts which can sleep.
2915 *
2916 * The completion callback is invoked in a context which can't sleep.
2917 * Before that invocation, the value of message->status is undefined.
2918 * When the callback is issued, message->status holds either zero (to
2919 * indicate complete success) or a negative error code. After that
2920 * callback returns, the driver which issued the transfer request may
2921 * deallocate the associated memory; it's no longer in use by any SPI
2922 * core or controller driver code.
2923 *
2924 * Note that although all messages to a spi_device are handled in
2925 * FIFO order, messages may go to different devices in other orders.
2926 * Some device might be higher priority, or have various "hard" access
2927 * time requirements, for example.
2928 *
2929 * On detection of any fault during the transfer, processing of
2930 * the entire message is aborted, and the device is deselected.
2931 * Until returning from the associated message completion callback,
2932 * no other spi_message queued to that device will be processed.
2933 * (This rule applies equally to all the synchronous transfer calls,
2934 * which are wrappers around this core asynchronous primitive.)
2935 *
2936 * Return: zero on success, else a negative error code.
2937 */
2938int spi_async(struct spi_device *spi, struct spi_message *message)
2939{
2940 struct spi_controller *ctlr = spi->controller;
2941 int ret;
2942 unsigned long flags;
2943
2944 ret = __spi_validate(spi, message);
2945 if (ret != 0)
2946 return ret;
2947
2948 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
2949
2950 if (ctlr->bus_lock_flag)
2951 ret = -EBUSY;
2952 else
2953 ret = __spi_async(spi, message);
2954
2955 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
2956
2957 return ret;
2958}
2959EXPORT_SYMBOL_GPL(spi_async);
2960
2961/**
2962 * spi_async_locked - version of spi_async with exclusive bus usage
2963 * @spi: device with which data will be exchanged
2964 * @message: describes the data transfers, including completion callback
2965 * Context: any (irqs may be blocked, etc)
2966 *
2967 * This call may be used in_irq and other contexts which can't sleep,
2968 * as well as from task contexts which can sleep.
2969 *
2970 * The completion callback is invoked in a context which can't sleep.
2971 * Before that invocation, the value of message->status is undefined.
2972 * When the callback is issued, message->status holds either zero (to
2973 * indicate complete success) or a negative error code. After that
2974 * callback returns, the driver which issued the transfer request may
2975 * deallocate the associated memory; it's no longer in use by any SPI
2976 * core or controller driver code.
2977 *
2978 * Note that although all messages to a spi_device are handled in
2979 * FIFO order, messages may go to different devices in other orders.
2980 * Some device might be higher priority, or have various "hard" access
2981 * time requirements, for example.
2982 *
2983 * On detection of any fault during the transfer, processing of
2984 * the entire message is aborted, and the device is deselected.
2985 * Until returning from the associated message completion callback,
2986 * no other spi_message queued to that device will be processed.
2987 * (This rule applies equally to all the synchronous transfer calls,
2988 * which are wrappers around this core asynchronous primitive.)
2989 *
2990 * Return: zero on success, else a negative error code.
2991 */
2992int spi_async_locked(struct spi_device *spi, struct spi_message *message)
2993{
2994 struct spi_controller *ctlr = spi->controller;
2995 int ret;
2996 unsigned long flags;
2997
2998 ret = __spi_validate(spi, message);
2999 if (ret != 0)
3000 return ret;
3001
3002 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3003
3004 ret = __spi_async(spi, message);
3005
3006 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3007
3008 return ret;
3009
3010}
3011EXPORT_SYMBOL_GPL(spi_async_locked);
3012
3013
3014int spi_flash_read(struct spi_device *spi,
3015 struct spi_flash_read_message *msg)
3016
3017{
3018 struct spi_controller *master = spi->controller;
3019 struct device *rx_dev = NULL;
3020 int ret;
3021
3022 if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
3023 msg->addr_nbits == SPI_NBITS_DUAL) &&
3024 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
3025 return -EINVAL;
3026 if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
3027 msg->addr_nbits == SPI_NBITS_QUAD) &&
3028 !(spi->mode & SPI_TX_QUAD))
3029 return -EINVAL;
3030 if (msg->data_nbits == SPI_NBITS_DUAL &&
3031 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
3032 return -EINVAL;
3033 if (msg->data_nbits == SPI_NBITS_QUAD &&
3034 !(spi->mode & SPI_RX_QUAD))
3035 return -EINVAL;
3036
3037 if (master->auto_runtime_pm) {
3038 ret = pm_runtime_get_sync(master->dev.parent);
3039 if (ret < 0) {
3040 dev_err(&master->dev, "Failed to power device: %d\n",
3041 ret);
3042 return ret;
3043 }
3044 }
3045
3046 mutex_lock(&master->bus_lock_mutex);
3047 mutex_lock(&master->io_mutex);
3048 if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) {
3049 rx_dev = master->dma_rx->device->dev;
3050 ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
3051 msg->buf, msg->len,
3052 DMA_FROM_DEVICE);
3053 if (!ret)
3054 msg->cur_msg_mapped = true;
3055 }
3056 ret = master->spi_flash_read(spi, msg);
3057 if (msg->cur_msg_mapped)
3058 spi_unmap_buf(master, rx_dev, &msg->rx_sg,
3059 DMA_FROM_DEVICE);
3060 mutex_unlock(&master->io_mutex);
3061 mutex_unlock(&master->bus_lock_mutex);
3062
3063 if (master->auto_runtime_pm)
3064 pm_runtime_put(master->dev.parent);
3065
3066 return ret;
3067}
3068EXPORT_SYMBOL_GPL(spi_flash_read);
3069
3070/*-------------------------------------------------------------------------*/
3071
3072/* Utility methods for SPI protocol drivers, layered on
3073 * top of the core. Some other utility methods are defined as
3074 * inline functions.
3075 */
3076
3077static void spi_complete(void *arg)
3078{
3079 complete(arg);
3080}
3081
3082static int __spi_sync(struct spi_device *spi, struct spi_message *message)
3083{
3084 DECLARE_COMPLETION_ONSTACK(done);
3085 int status;
3086 struct spi_controller *ctlr = spi->controller;
3087 unsigned long flags;
3088
3089 status = __spi_validate(spi, message);
3090 if (status != 0)
3091 return status;
3092
3093 message->complete = spi_complete;
3094 message->context = &done;
3095 message->spi = spi;
3096
3097 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_sync);
3098 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_sync);
3099
3100 /* If we're not using the legacy transfer method then we will
3101 * try to transfer in the calling context so special case.
3102 * This code would be less tricky if we could remove the
3103 * support for driver implemented message queues.
3104 */
3105 if (ctlr->transfer == spi_queued_transfer) {
3106 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3107
3108 trace_spi_message_submit(message);
3109
3110 status = __spi_queued_transfer(spi, message, false);
3111
3112 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3113 } else {
3114 status = spi_async_locked(spi, message);
3115 }
3116
3117 if (status == 0) {
3118 /* Push out the messages in the calling context if we
3119 * can.
3120 */
3121 if (ctlr->transfer == spi_queued_transfer) {
3122 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
3123 spi_sync_immediate);
3124 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
3125 spi_sync_immediate);
3126 __spi_pump_messages(ctlr, false);
3127 }
3128
3129 wait_for_completion(&done);
3130 status = message->status;
3131 }
3132 message->context = NULL;
3133 return status;
3134}
3135
3136/**
3137 * spi_sync - blocking/synchronous SPI data transfers
3138 * @spi: device with which data will be exchanged
3139 * @message: describes the data transfers
3140 * Context: can sleep
3141 *
3142 * This call may only be used from a context that may sleep. The sleep
3143 * is non-interruptible, and has no timeout. Low-overhead controller
3144 * drivers may DMA directly into and out of the message buffers.
3145 *
3146 * Note that the SPI device's chip select is active during the message,
3147 * and then is normally disabled between messages. Drivers for some
3148 * frequently-used devices may want to minimize costs of selecting a chip,
3149 * by leaving it selected in anticipation that the next message will go
3150 * to the same chip. (That may increase power usage.)
3151 *
3152 * Also, the caller is guaranteeing that the memory associated with the
3153 * message will not be freed before this call returns.
3154 *
3155 * Return: zero on success, else a negative error code.
3156 */
3157int spi_sync(struct spi_device *spi, struct spi_message *message)
3158{
3159 int ret;
3160
3161 mutex_lock(&spi->controller->bus_lock_mutex);
3162 ret = __spi_sync(spi, message);
3163 mutex_unlock(&spi->controller->bus_lock_mutex);
3164
3165 return ret;
3166}
3167EXPORT_SYMBOL_GPL(spi_sync);
3168
3169/**
3170 * spi_sync_locked - version of spi_sync with exclusive bus usage
3171 * @spi: device with which data will be exchanged
3172 * @message: describes the data transfers
3173 * Context: can sleep
3174 *
3175 * This call may only be used from a context that may sleep. The sleep
3176 * is non-interruptible, and has no timeout. Low-overhead controller
3177 * drivers may DMA directly into and out of the message buffers.
3178 *
3179 * This call should be used by drivers that require exclusive access to the
3180 * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
3181 * be released by a spi_bus_unlock call when the exclusive access is over.
3182 *
3183 * Return: zero on success, else a negative error code.
3184 */
3185int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
3186{
3187 return __spi_sync(spi, message);
3188}
3189EXPORT_SYMBOL_GPL(spi_sync_locked);
3190
3191/**
3192 * spi_bus_lock - obtain a lock for exclusive SPI bus usage
3193 * @ctlr: SPI bus master that should be locked for exclusive bus access
3194 * Context: can sleep
3195 *
3196 * This call may only be used from a context that may sleep. The sleep
3197 * is non-interruptible, and has no timeout.
3198 *
3199 * This call should be used by drivers that require exclusive access to the
3200 * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
3201 * exclusive access is over. Data transfer must be done by spi_sync_locked
3202 * and spi_async_locked calls when the SPI bus lock is held.
3203 *
3204 * Return: always zero.
3205 */
3206int spi_bus_lock(struct spi_controller *ctlr)
3207{
3208 unsigned long flags;
3209
3210 mutex_lock(&ctlr->bus_lock_mutex);
3211
3212 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3213 ctlr->bus_lock_flag = 1;
3214 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3215
3216 /* mutex remains locked until spi_bus_unlock is called */
3217
3218 return 0;
3219}
3220EXPORT_SYMBOL_GPL(spi_bus_lock);
3221
3222/**
3223 * spi_bus_unlock - release the lock for exclusive SPI bus usage
3224 * @ctlr: SPI bus master that was locked for exclusive bus access
3225 * Context: can sleep
3226 *
3227 * This call may only be used from a context that may sleep. The sleep
3228 * is non-interruptible, and has no timeout.
3229 *
3230 * This call releases an SPI bus lock previously obtained by an spi_bus_lock
3231 * call.
3232 *
3233 * Return: always zero.
3234 */
3235int spi_bus_unlock(struct spi_controller *ctlr)
3236{
3237 ctlr->bus_lock_flag = 0;
3238
3239 mutex_unlock(&ctlr->bus_lock_mutex);
3240
3241 return 0;
3242}
3243EXPORT_SYMBOL_GPL(spi_bus_unlock);
3244
3245/* portable code must never pass more than 32 bytes */
3246#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
3247
3248static u8 *buf;
3249
3250/**
3251 * spi_write_then_read - SPI synchronous write followed by read
3252 * @spi: device with which data will be exchanged
3253 * @txbuf: data to be written (need not be dma-safe)
3254 * @n_tx: size of txbuf, in bytes
3255 * @rxbuf: buffer into which data will be read (need not be dma-safe)
3256 * @n_rx: size of rxbuf, in bytes
3257 * Context: can sleep
3258 *
3259 * This performs a half duplex MicroWire style transaction with the
3260 * device, sending txbuf and then reading rxbuf. The return value
3261 * is zero for success, else a negative errno status code.
3262 * This call may only be used from a context that may sleep.
3263 *
3264 * Parameters to this routine are always copied using a small buffer;
3265 * portable code should never use this for more than 32 bytes.
3266 * Performance-sensitive or bulk transfer code should instead use
3267 * spi_{async,sync}() calls with dma-safe buffers.
3268 *
3269 * Return: zero on success, else a negative error code.
3270 */
3271int spi_write_then_read(struct spi_device *spi,
3272 const void *txbuf, unsigned n_tx,
3273 void *rxbuf, unsigned n_rx)
3274{
3275 static DEFINE_MUTEX(lock);
3276
3277 int status;
3278 struct spi_message message;
3279 struct spi_transfer x[2];
3280 u8 *local_buf;
3281
3282 /* Use preallocated DMA-safe buffer if we can. We can't avoid
3283 * copying here, (as a pure convenience thing), but we can
3284 * keep heap costs out of the hot path unless someone else is
3285 * using the pre-allocated buffer or the transfer is too large.
3286 */
3287 if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
3288 local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
3289 GFP_KERNEL | GFP_DMA);
3290 if (!local_buf)
3291 return -ENOMEM;
3292 } else {
3293 local_buf = buf;
3294 }
3295
3296 spi_message_init(&message);
3297 memset(x, 0, sizeof(x));
3298 if (n_tx) {
3299 x[0].len = n_tx;
3300 spi_message_add_tail(&x[0], &message);
3301 }
3302 if (n_rx) {
3303 x[1].len = n_rx;
3304 spi_message_add_tail(&x[1], &message);
3305 }
3306
3307 memcpy(local_buf, txbuf, n_tx);
3308 x[0].tx_buf = local_buf;
3309 x[1].rx_buf = local_buf + n_tx;
3310
3311 /* do the i/o */
3312 status = spi_sync(spi, &message);
3313 if (status == 0)
3314 memcpy(rxbuf, x[1].rx_buf, n_rx);
3315
3316 if (x[0].tx_buf == buf)
3317 mutex_unlock(&lock);
3318 else
3319 kfree(local_buf);
3320
3321 return status;
3322}
3323EXPORT_SYMBOL_GPL(spi_write_then_read);
3324
3325/*-------------------------------------------------------------------------*/
3326
3327#if IS_ENABLED(CONFIG_OF_DYNAMIC)
3328static int __spi_of_device_match(struct device *dev, void *data)
3329{
3330 return dev->of_node == data;
3331}
3332
3333/* must call put_device() when done with returned spi_device device */
3334static struct spi_device *of_find_spi_device_by_node(struct device_node *node)
3335{
3336 struct device *dev = bus_find_device(&spi_bus_type, NULL, node,
3337 __spi_of_device_match);
3338 return dev ? to_spi_device(dev) : NULL;
3339}
3340
3341static int __spi_of_controller_match(struct device *dev, const void *data)
3342{
3343 return dev->of_node == data;
3344}
3345
3346/* the spi controllers are not using spi_bus, so we find it with another way */
3347static struct spi_controller *of_find_spi_controller_by_node(struct device_node *node)
3348{
3349 struct device *dev;
3350
3351 dev = class_find_device(&spi_master_class, NULL, node,
3352 __spi_of_controller_match);
3353 if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
3354 dev = class_find_device(&spi_slave_class, NULL, node,
3355 __spi_of_controller_match);
3356 if (!dev)
3357 return NULL;
3358
3359 /* reference got in class_find_device */
3360 return container_of(dev, struct spi_controller, dev);
3361}
3362
3363static int of_spi_notify(struct notifier_block *nb, unsigned long action,
3364 void *arg)
3365{
3366 struct of_reconfig_data *rd = arg;
3367 struct spi_controller *ctlr;
3368 struct spi_device *spi;
3369
3370 switch (of_reconfig_get_state_change(action, arg)) {
3371 case OF_RECONFIG_CHANGE_ADD:
3372 ctlr = of_find_spi_controller_by_node(rd->dn->parent);
3373 if (ctlr == NULL)
3374 return NOTIFY_OK; /* not for us */
3375
3376 if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
3377 put_device(&ctlr->dev);
3378 return NOTIFY_OK;
3379 }
3380
3381 spi = of_register_spi_device(ctlr, rd->dn);
3382 put_device(&ctlr->dev);
3383
3384 if (IS_ERR(spi)) {
3385 pr_err("%s: failed to create for '%pOF'\n",
3386 __func__, rd->dn);
3387 of_node_clear_flag(rd->dn, OF_POPULATED);
3388 return notifier_from_errno(PTR_ERR(spi));
3389 }
3390 break;
3391
3392 case OF_RECONFIG_CHANGE_REMOVE:
3393 /* already depopulated? */
3394 if (!of_node_check_flag(rd->dn, OF_POPULATED))
3395 return NOTIFY_OK;
3396
3397 /* find our device by node */
3398 spi = of_find_spi_device_by_node(rd->dn);
3399 if (spi == NULL)
3400 return NOTIFY_OK; /* no? not meant for us */
3401
3402 /* unregister takes one ref away */
3403 spi_unregister_device(spi);
3404
3405 /* and put the reference of the find */
3406 put_device(&spi->dev);
3407 break;
3408 }
3409
3410 return NOTIFY_OK;
3411}
3412
3413static struct notifier_block spi_of_notifier = {
3414 .notifier_call = of_spi_notify,
3415};
3416#else /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3417extern struct notifier_block spi_of_notifier;
3418#endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3419
3420#if IS_ENABLED(CONFIG_ACPI)
3421static int spi_acpi_controller_match(struct device *dev, const void *data)
3422{
3423 return ACPI_COMPANION(dev->parent) == data;
3424}
3425
3426static int spi_acpi_device_match(struct device *dev, void *data)
3427{
3428 return ACPI_COMPANION(dev) == data;
3429}
3430
3431static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev)
3432{
3433 struct device *dev;
3434
3435 dev = class_find_device(&spi_master_class, NULL, adev,
3436 spi_acpi_controller_match);
3437 if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
3438 dev = class_find_device(&spi_slave_class, NULL, adev,
3439 spi_acpi_controller_match);
3440 if (!dev)
3441 return NULL;
3442
3443 return container_of(dev, struct spi_controller, dev);
3444}
3445
3446static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev)
3447{
3448 struct device *dev;
3449
3450 dev = bus_find_device(&spi_bus_type, NULL, adev, spi_acpi_device_match);
3451
3452 return dev ? to_spi_device(dev) : NULL;
3453}
3454
3455static int acpi_spi_notify(struct notifier_block *nb, unsigned long value,
3456 void *arg)
3457{
3458 struct acpi_device *adev = arg;
3459 struct spi_controller *ctlr;
3460 struct spi_device *spi;
3461
3462 switch (value) {
3463 case ACPI_RECONFIG_DEVICE_ADD:
3464 ctlr = acpi_spi_find_controller_by_adev(adev->parent);
3465 if (!ctlr)
3466 break;
3467
3468 acpi_register_spi_device(ctlr, adev);
3469 put_device(&ctlr->dev);
3470 break;
3471 case ACPI_RECONFIG_DEVICE_REMOVE:
3472 if (!acpi_device_enumerated(adev))
3473 break;
3474
3475 spi = acpi_spi_find_device_by_adev(adev);
3476 if (!spi)
3477 break;
3478
3479 spi_unregister_device(spi);
3480 put_device(&spi->dev);
3481 break;
3482 }
3483
3484 return NOTIFY_OK;
3485}
3486
3487static struct notifier_block spi_acpi_notifier = {
3488 .notifier_call = acpi_spi_notify,
3489};
3490#else
3491extern struct notifier_block spi_acpi_notifier;
3492#endif
3493
3494static int __init spi_init(void)
3495{
3496 int status;
3497
3498 buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
3499 if (!buf) {
3500 status = -ENOMEM;
3501 goto err0;
3502 }
3503
3504 status = bus_register(&spi_bus_type);
3505 if (status < 0)
3506 goto err1;
3507
3508 status = class_register(&spi_master_class);
3509 if (status < 0)
3510 goto err2;
3511
3512 if (IS_ENABLED(CONFIG_SPI_SLAVE)) {
3513 status = class_register(&spi_slave_class);
3514 if (status < 0)
3515 goto err3;
3516 }
3517
3518 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
3519 WARN_ON(of_reconfig_notifier_register(&spi_of_notifier));
3520 if (IS_ENABLED(CONFIG_ACPI))
3521 WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier));
3522
3523 return 0;
3524
3525err3:
3526 class_unregister(&spi_master_class);
3527err2:
3528 bus_unregister(&spi_bus_type);
3529err1:
3530 kfree(buf);
3531 buf = NULL;
3532err0:
3533 return status;
3534}
3535
3536/* board_info is normally registered in arch_initcall(),
3537 * but even essential drivers wait till later
3538 *
3539 * REVISIT only boardinfo really needs static linking. the rest (device and
3540 * driver registration) _could_ be dynamically linked (modular) ... costs
3541 * include needing to have boardinfo data structures be much more public.
3542 */
3543postcore_initcall(spi_init);
3544