Linux Audio

Check our new training course

Loading...
v5.9
  1/*
  2 * This file is subject to the terms and conditions of the GNU General Public
  3 * License.  See the file "COPYING" in the main directory of this archive
  4 * for more details.
  5 *
  6 * Copyright (c) 1994 - 1997, 99, 2000, 06, 07  Ralf Baechle (ralf@linux-mips.org)
  7 * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
  8 */
  9#ifndef _ASM_BITOPS_H
 10#define _ASM_BITOPS_H
 11
 12#ifndef _LINUX_BITOPS_H
 13#error only <linux/bitops.h> can be included directly
 14#endif
 15
 16#include <linux/bits.h>
 17#include <linux/compiler.h>
 18#include <linux/types.h>
 19#include <asm/barrier.h>
 20#include <asm/byteorder.h>		/* sigh ... */
 21#include <asm/compiler.h>
 22#include <asm/cpu-features.h>
 23#include <asm/isa-rev.h>
 24#include <asm/llsc.h>
 25#include <asm/sgidefs.h>
 26#include <asm/war.h>
 27
 28#define __bit_op(mem, insn, inputs...) do {			\
 29	unsigned long temp;					\
 30								\
 31	asm volatile(						\
 32	"	.set		push			\n"	\
 33	"	.set		" MIPS_ISA_LEVEL "	\n"	\
 34	"	" __SYNC(full, loongson3_war) "		\n"	\
 35	"1:	" __LL		"%0, %1			\n"	\
 36	"	" insn		"			\n"	\
 37	"	" __SC		"%0, %1			\n"	\
 38	"	" __SC_BEQZ	"%0, 1b			\n"	\
 39	"	.set		pop			\n"	\
 40	: "=&r"(temp), "+" GCC_OFF_SMALL_ASM()(mem)		\
 41	: inputs						\
 42	: __LLSC_CLOBBER);					\
 43} while (0)
 44
 45#define __test_bit_op(mem, ll_dst, insn, inputs...) ({		\
 46	unsigned long orig, temp;				\
 47								\
 48	asm volatile(						\
 49	"	.set		push			\n"	\
 50	"	.set		" MIPS_ISA_LEVEL "	\n"	\
 51	"	" __SYNC(full, loongson3_war) "		\n"	\
 52	"1:	" __LL		ll_dst ", %2		\n"	\
 53	"	" insn		"			\n"	\
 54	"	" __SC		"%1, %2			\n"	\
 55	"	" __SC_BEQZ	"%1, 1b			\n"	\
 56	"	.set		pop			\n"	\
 57	: "=&r"(orig), "=&r"(temp),				\
 58	  "+" GCC_OFF_SMALL_ASM()(mem)				\
 59	: inputs						\
 60	: __LLSC_CLOBBER);					\
 61								\
 62	orig;							\
 63})
 64
 65/*
 66 * These are the "slower" versions of the functions and are in bitops.c.
 67 * These functions call raw_local_irq_{save,restore}().
 68 */
 69void __mips_set_bit(unsigned long nr, volatile unsigned long *addr);
 70void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr);
 71void __mips_change_bit(unsigned long nr, volatile unsigned long *addr);
 
 
 72int __mips_test_and_set_bit_lock(unsigned long nr,
 73				 volatile unsigned long *addr);
 74int __mips_test_and_clear_bit(unsigned long nr,
 75			      volatile unsigned long *addr);
 76int __mips_test_and_change_bit(unsigned long nr,
 77			       volatile unsigned long *addr);
 78
 79
 80/*
 81 * set_bit - Atomically set a bit in memory
 82 * @nr: the bit to set
 83 * @addr: the address to start counting from
 84 *
 85 * This function is atomic and may not be reordered.  See __set_bit()
 86 * if you do not require the atomic guarantees.
 87 * Note that @nr may be almost arbitrarily large; this function is not
 88 * restricted to acting on a single-word quantity.
 89 */
 90static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 91{
 92	volatile unsigned long *m = &addr[BIT_WORD(nr)];
 93	int bit = nr % BITS_PER_LONG;
 94
 95	if (!kernel_uses_llsc) {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 96		__mips_set_bit(nr, addr);
 97		return;
 98	}
 99
100	if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit) && (bit >= 16)) {
101		__bit_op(*m, __INS "%0, %3, %2, 1", "i"(bit), "r"(~0));
102		return;
103	}
104
105	__bit_op(*m, "or\t%0, %2", "ir"(BIT(bit)));
106}
107
108/*
109 * clear_bit - Clears a bit in memory
110 * @nr: Bit to clear
111 * @addr: Address to start counting from
112 *
113 * clear_bit() is atomic and may not be reordered.  However, it does
114 * not contain a memory barrier, so if it is used for locking purposes,
115 * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic()
116 * in order to ensure changes are visible on other processors.
117 */
118static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
119{
120	volatile unsigned long *m = &addr[BIT_WORD(nr)];
121	int bit = nr % BITS_PER_LONG;
122
123	if (!kernel_uses_llsc) {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
124		__mips_clear_bit(nr, addr);
125		return;
126	}
127
128	if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit)) {
129		__bit_op(*m, __INS "%0, $0, %2, 1", "i"(bit));
130		return;
131	}
132
133	__bit_op(*m, "and\t%0, %2", "ir"(~BIT(bit)));
134}
135
136/*
137 * clear_bit_unlock - Clears a bit in memory
138 * @nr: Bit to clear
139 * @addr: Address to start counting from
140 *
141 * clear_bit() is atomic and implies release semantics before the memory
142 * operation. It can be used for an unlock.
143 */
144static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
145{
146	smp_mb__before_atomic();
147	clear_bit(nr, addr);
148}
149
150/*
151 * change_bit - Toggle a bit in memory
152 * @nr: Bit to change
153 * @addr: Address to start counting from
154 *
155 * change_bit() is atomic and may not be reordered.
156 * Note that @nr may be almost arbitrarily large; this function is not
157 * restricted to acting on a single-word quantity.
158 */
159static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
160{
161	volatile unsigned long *m = &addr[BIT_WORD(nr)];
162	int bit = nr % BITS_PER_LONG;
163
164	if (!kernel_uses_llsc) {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
165		__mips_change_bit(nr, addr);
166		return;
167	}
168
169	__bit_op(*m, "xor\t%0, %2", "ir"(BIT(bit)));
170}
171
172/*
173 * test_and_set_bit_lock - Set a bit and return its old value
174 * @nr: Bit to set
175 * @addr: Address to count from
176 *
177 * This operation is atomic and implies acquire ordering semantics
178 * after the memory operation.
179 */
180static inline int test_and_set_bit_lock(unsigned long nr,
181	volatile unsigned long *addr)
182{
183	volatile unsigned long *m = &addr[BIT_WORD(nr)];
184	int bit = nr % BITS_PER_LONG;
185	unsigned long res, orig;
186
187	if (!kernel_uses_llsc) {
188		res = __mips_test_and_set_bit_lock(nr, addr);
189	} else {
190		orig = __test_bit_op(*m, "%0",
191				     "or\t%1, %0, %3",
192				     "ir"(BIT(bit)));
193		res = (orig & BIT(bit)) != 0;
194	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
195
196	smp_llsc_mb();
197
198	return res;
199}
200
201/*
202 * test_and_set_bit - Set a bit and return its old value
203 * @nr: Bit to set
204 * @addr: Address to count from
205 *
206 * This operation is atomic and cannot be reordered.
207 * It also implies a memory barrier.
208 */
209static inline int test_and_set_bit(unsigned long nr,
210	volatile unsigned long *addr)
211{
212	smp_mb__before_atomic();
213	return test_and_set_bit_lock(nr, addr);
214}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
215
 
 
 
 
 
 
 
 
216/*
217 * test_and_clear_bit - Clear a bit and return its old value
218 * @nr: Bit to clear
219 * @addr: Address to count from
220 *
221 * This operation is atomic and cannot be reordered.
222 * It also implies a memory barrier.
223 */
224static inline int test_and_clear_bit(unsigned long nr,
225	volatile unsigned long *addr)
226{
227	volatile unsigned long *m = &addr[BIT_WORD(nr)];
228	int bit = nr % BITS_PER_LONG;
229	unsigned long res, orig;
230
231	smp_mb__before_atomic();
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
232
233	if (!kernel_uses_llsc) {
 
234		res = __mips_test_and_clear_bit(nr, addr);
235	} else if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(nr)) {
236		res = __test_bit_op(*m, "%1",
237				    __EXT "%0, %1, %3, 1;"
238				    __INS "%1, $0, %3, 1",
239				    "i"(bit));
240	} else {
241		orig = __test_bit_op(*m, "%0",
242				     "or\t%1, %0, %3;"
243				     "xor\t%1, %1, %3",
244				     "ir"(BIT(bit)));
245		res = (orig & BIT(bit)) != 0;
246	}
247
248	smp_llsc_mb();
249
250	return res;
251}
252
253/*
254 * test_and_change_bit - Change a bit and return its old value
255 * @nr: Bit to change
256 * @addr: Address to count from
257 *
258 * This operation is atomic and cannot be reordered.
259 * It also implies a memory barrier.
260 */
261static inline int test_and_change_bit(unsigned long nr,
262	volatile unsigned long *addr)
263{
264	volatile unsigned long *m = &addr[BIT_WORD(nr)];
265	int bit = nr % BITS_PER_LONG;
266	unsigned long res, orig;
267
268	smp_mb__before_atomic();
269
270	if (!kernel_uses_llsc) {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
271		res = __mips_test_and_change_bit(nr, addr);
272	} else {
273		orig = __test_bit_op(*m, "%0",
274				     "xor\t%1, %0, %3",
275				     "ir"(BIT(bit)));
276		res = (orig & BIT(bit)) != 0;
277	}
278
279	smp_llsc_mb();
280
281	return res;
282}
283
284#undef __bit_op
285#undef __test_bit_op
286
287#include <asm-generic/bitops/non-atomic.h>
288
289/*
290 * __clear_bit_unlock - Clears a bit in memory
291 * @nr: Bit to clear
292 * @addr: Address to start counting from
293 *
294 * __clear_bit() is non-atomic and implies release semantics before the memory
295 * operation. It can be used for an unlock if no other CPUs can concurrently
296 * modify other bits in the word.
297 */
298static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
299{
300	smp_mb__before_llsc();
301	__clear_bit(nr, addr);
302	nudge_writes();
303}
304
305/*
306 * Return the bit position (0..63) of the most significant 1 bit in a word
307 * Returns -1 if no 1 bit exists
308 */
309static __always_inline unsigned long __fls(unsigned long word)
310{
311	int num;
312
313	if (BITS_PER_LONG == 32 && !__builtin_constant_p(word) &&
314	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
315		__asm__(
316		"	.set	push					\n"
317		"	.set	"MIPS_ISA_LEVEL"			\n"
318		"	clz	%0, %1					\n"
319		"	.set	pop					\n"
320		: "=r" (num)
321		: "r" (word));
322
323		return 31 - num;
324	}
325
326	if (BITS_PER_LONG == 64 && !__builtin_constant_p(word) &&
327	    __builtin_constant_p(cpu_has_mips64) && cpu_has_mips64) {
328		__asm__(
329		"	.set	push					\n"
330		"	.set	"MIPS_ISA_LEVEL"			\n"
331		"	dclz	%0, %1					\n"
332		"	.set	pop					\n"
333		: "=r" (num)
334		: "r" (word));
335
336		return 63 - num;
337	}
338
339	num = BITS_PER_LONG - 1;
340
341#if BITS_PER_LONG == 64
342	if (!(word & (~0ul << 32))) {
343		num -= 32;
344		word <<= 32;
345	}
346#endif
347	if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
348		num -= 16;
349		word <<= 16;
350	}
351	if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
352		num -= 8;
353		word <<= 8;
354	}
355	if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
356		num -= 4;
357		word <<= 4;
358	}
359	if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
360		num -= 2;
361		word <<= 2;
362	}
363	if (!(word & (~0ul << (BITS_PER_LONG-1))))
364		num -= 1;
365	return num;
366}
367
368/*
369 * __ffs - find first bit in word.
370 * @word: The word to search
371 *
372 * Returns 0..SZLONG-1
373 * Undefined if no bit exists, so code should check against 0 first.
374 */
375static __always_inline unsigned long __ffs(unsigned long word)
376{
377	return __fls(word & -word);
378}
379
380/*
381 * fls - find last bit set.
382 * @word: The word to search
383 *
384 * This is defined the same way as ffs.
385 * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
386 */
387static inline int fls(unsigned int x)
388{
389	int r;
390
391	if (!__builtin_constant_p(x) &&
392	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
393		__asm__(
394		"	.set	push					\n"
395		"	.set	"MIPS_ISA_LEVEL"			\n"
396		"	clz	%0, %1					\n"
397		"	.set	pop					\n"
398		: "=r" (x)
399		: "r" (x));
400
401		return 32 - x;
402	}
403
404	r = 32;
405	if (!x)
406		return 0;
407	if (!(x & 0xffff0000u)) {
408		x <<= 16;
409		r -= 16;
410	}
411	if (!(x & 0xff000000u)) {
412		x <<= 8;
413		r -= 8;
414	}
415	if (!(x & 0xf0000000u)) {
416		x <<= 4;
417		r -= 4;
418	}
419	if (!(x & 0xc0000000u)) {
420		x <<= 2;
421		r -= 2;
422	}
423	if (!(x & 0x80000000u)) {
424		x <<= 1;
425		r -= 1;
426	}
427	return r;
428}
429
430#include <asm-generic/bitops/fls64.h>
431
432/*
433 * ffs - find first bit set.
434 * @word: The word to search
435 *
436 * This is defined the same way as
437 * the libc and compiler builtin ffs routines, therefore
438 * differs in spirit from the above ffz (man ffs).
439 */
440static inline int ffs(int word)
441{
442	if (!word)
443		return 0;
444
445	return fls(word & -word);
446}
447
448#include <asm-generic/bitops/ffz.h>
449#include <asm-generic/bitops/find.h>
450
451#ifdef __KERNEL__
452
453#include <asm-generic/bitops/sched.h>
454
455#include <asm/arch_hweight.h>
456#include <asm-generic/bitops/const_hweight.h>
457
458#include <asm-generic/bitops/le.h>
459#include <asm-generic/bitops/ext2-atomic.h>
460
461#endif /* __KERNEL__ */
462
463#endif /* _ASM_BITOPS_H */
v4.6
  1/*
  2 * This file is subject to the terms and conditions of the GNU General Public
  3 * License.  See the file "COPYING" in the main directory of this archive
  4 * for more details.
  5 *
  6 * Copyright (c) 1994 - 1997, 99, 2000, 06, 07  Ralf Baechle (ralf@linux-mips.org)
  7 * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
  8 */
  9#ifndef _ASM_BITOPS_H
 10#define _ASM_BITOPS_H
 11
 12#ifndef _LINUX_BITOPS_H
 13#error only <linux/bitops.h> can be included directly
 14#endif
 15
 
 16#include <linux/compiler.h>
 17#include <linux/types.h>
 18#include <asm/barrier.h>
 19#include <asm/byteorder.h>		/* sigh ... */
 20#include <asm/compiler.h>
 21#include <asm/cpu-features.h>
 
 
 22#include <asm/sgidefs.h>
 23#include <asm/war.h>
 24
 25#if _MIPS_SZLONG == 32
 26#define SZLONG_LOG 5
 27#define SZLONG_MASK 31UL
 28#define __LL		"ll	"
 29#define __SC		"sc	"
 30#define __INS		"ins	"
 31#define __EXT		"ext	"
 32#elif _MIPS_SZLONG == 64
 33#define SZLONG_LOG 6
 34#define SZLONG_MASK 63UL
 35#define __LL		"lld	"
 36#define __SC		"scd	"
 37#define __INS		"dins	 "
 38#define __EXT		"dext	 "
 39#endif
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 40
 41/*
 42 * These are the "slower" versions of the functions and are in bitops.c.
 43 * These functions call raw_local_irq_{save,restore}().
 44 */
 45void __mips_set_bit(unsigned long nr, volatile unsigned long *addr);
 46void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr);
 47void __mips_change_bit(unsigned long nr, volatile unsigned long *addr);
 48int __mips_test_and_set_bit(unsigned long nr,
 49			    volatile unsigned long *addr);
 50int __mips_test_and_set_bit_lock(unsigned long nr,
 51				 volatile unsigned long *addr);
 52int __mips_test_and_clear_bit(unsigned long nr,
 53			      volatile unsigned long *addr);
 54int __mips_test_and_change_bit(unsigned long nr,
 55			       volatile unsigned long *addr);
 56
 57
 58/*
 59 * set_bit - Atomically set a bit in memory
 60 * @nr: the bit to set
 61 * @addr: the address to start counting from
 62 *
 63 * This function is atomic and may not be reordered.  See __set_bit()
 64 * if you do not require the atomic guarantees.
 65 * Note that @nr may be almost arbitrarily large; this function is not
 66 * restricted to acting on a single-word quantity.
 67 */
 68static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 69{
 70	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 71	int bit = nr & SZLONG_MASK;
 72	unsigned long temp;
 73
 74	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 75		__asm__ __volatile__(
 76		"	.set	arch=r4000				\n"
 77		"1:	" __LL "%0, %1			# set_bit	\n"
 78		"	or	%0, %2					\n"
 79		"	" __SC	"%0, %1					\n"
 80		"	beqzl	%0, 1b					\n"
 81		"	.set	mips0					\n"
 82		: "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*m)
 83		: "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m));
 84#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 85	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
 86		do {
 87			__asm__ __volatile__(
 88			"	" __LL "%0, %1		# set_bit	\n"
 89			"	" __INS "%0, %3, %2, 1			\n"
 90			"	" __SC "%0, %1				\n"
 91			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
 92			: "ir" (bit), "r" (~0));
 93		} while (unlikely(!temp));
 94#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 95	} else if (kernel_uses_llsc) {
 96		do {
 97			__asm__ __volatile__(
 98			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
 99			"	" __LL "%0, %1		# set_bit	\n"
100			"	or	%0, %2				\n"
101			"	" __SC	"%0, %1				\n"
102			"	.set	mips0				\n"
103			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
104			: "ir" (1UL << bit));
105		} while (unlikely(!temp));
106	} else
107		__mips_set_bit(nr, addr);
 
 
 
 
 
 
 
 
 
108}
109
110/*
111 * clear_bit - Clears a bit in memory
112 * @nr: Bit to clear
113 * @addr: Address to start counting from
114 *
115 * clear_bit() is atomic and may not be reordered.  However, it does
116 * not contain a memory barrier, so if it is used for locking purposes,
117 * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic()
118 * in order to ensure changes are visible on other processors.
119 */
120static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
121{
122	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
123	int bit = nr & SZLONG_MASK;
124	unsigned long temp;
125
126	if (kernel_uses_llsc && R10000_LLSC_WAR) {
127		__asm__ __volatile__(
128		"	.set	arch=r4000				\n"
129		"1:	" __LL "%0, %1			# clear_bit	\n"
130		"	and	%0, %2					\n"
131		"	" __SC "%0, %1					\n"
132		"	beqzl	%0, 1b					\n"
133		"	.set	mips0					\n"
134		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
135		: "ir" (~(1UL << bit)));
136#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
137	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
138		do {
139			__asm__ __volatile__(
140			"	" __LL "%0, %1		# clear_bit	\n"
141			"	" __INS "%0, $0, %2, 1			\n"
142			"	" __SC "%0, %1				\n"
143			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
144			: "ir" (bit));
145		} while (unlikely(!temp));
146#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
147	} else if (kernel_uses_llsc) {
148		do {
149			__asm__ __volatile__(
150			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
151			"	" __LL "%0, %1		# clear_bit	\n"
152			"	and	%0, %2				\n"
153			"	" __SC "%0, %1				\n"
154			"	.set	mips0				\n"
155			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
156			: "ir" (~(1UL << bit)));
157		} while (unlikely(!temp));
158	} else
159		__mips_clear_bit(nr, addr);
 
 
 
 
 
 
 
 
 
160}
161
162/*
163 * clear_bit_unlock - Clears a bit in memory
164 * @nr: Bit to clear
165 * @addr: Address to start counting from
166 *
167 * clear_bit() is atomic and implies release semantics before the memory
168 * operation. It can be used for an unlock.
169 */
170static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
171{
172	smp_mb__before_atomic();
173	clear_bit(nr, addr);
174}
175
176/*
177 * change_bit - Toggle a bit in memory
178 * @nr: Bit to change
179 * @addr: Address to start counting from
180 *
181 * change_bit() is atomic and may not be reordered.
182 * Note that @nr may be almost arbitrarily large; this function is not
183 * restricted to acting on a single-word quantity.
184 */
185static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
186{
187	int bit = nr & SZLONG_MASK;
 
188
189	if (kernel_uses_llsc && R10000_LLSC_WAR) {
190		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
191		unsigned long temp;
192
193		__asm__ __volatile__(
194		"	.set	arch=r4000			\n"
195		"1:	" __LL "%0, %1		# change_bit	\n"
196		"	xor	%0, %2				\n"
197		"	" __SC	"%0, %1				\n"
198		"	beqzl	%0, 1b				\n"
199		"	.set	mips0				\n"
200		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
201		: "ir" (1UL << bit));
202	} else if (kernel_uses_llsc) {
203		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
204		unsigned long temp;
205
206		do {
207			__asm__ __volatile__(
208			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
209			"	" __LL "%0, %1		# change_bit	\n"
210			"	xor	%0, %2				\n"
211			"	" __SC	"%0, %1				\n"
212			"	.set	mips0				\n"
213			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m)
214			: "ir" (1UL << bit));
215		} while (unlikely(!temp));
216	} else
217		__mips_change_bit(nr, addr);
 
 
 
 
218}
219
220/*
221 * test_and_set_bit - Set a bit and return its old value
222 * @nr: Bit to set
223 * @addr: Address to count from
224 *
225 * This operation is atomic and cannot be reordered.
226 * It also implies a memory barrier.
227 */
228static inline int test_and_set_bit(unsigned long nr,
229	volatile unsigned long *addr)
230{
231	int bit = nr & SZLONG_MASK;
232	unsigned long res;
 
233
234	smp_mb__before_llsc();
235
236	if (kernel_uses_llsc && R10000_LLSC_WAR) {
237		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
238		unsigned long temp;
239
240		__asm__ __volatile__(
241		"	.set	arch=r4000				\n"
242		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
243		"	or	%2, %0, %3				\n"
244		"	" __SC	"%2, %1					\n"
245		"	beqzl	%2, 1b					\n"
246		"	and	%2, %0, %3				\n"
247		"	.set	mips0					\n"
248		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
249		: "r" (1UL << bit)
250		: "memory");
251	} else if (kernel_uses_llsc) {
252		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
253		unsigned long temp;
254
255		do {
256			__asm__ __volatile__(
257			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
258			"	" __LL "%0, %1	# test_and_set_bit	\n"
259			"	or	%2, %0, %3			\n"
260			"	" __SC	"%2, %1				\n"
261			"	.set	mips0				\n"
262			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
263			: "r" (1UL << bit)
264			: "memory");
265		} while (unlikely(!res));
266
267		res = temp & (1UL << bit);
268	} else
269		res = __mips_test_and_set_bit(nr, addr);
270
271	smp_llsc_mb();
272
273	return res != 0;
274}
275
276/*
277 * test_and_set_bit_lock - Set a bit and return its old value
278 * @nr: Bit to set
279 * @addr: Address to count from
280 *
281 * This operation is atomic and implies acquire ordering semantics
282 * after the memory operation.
283 */
284static inline int test_and_set_bit_lock(unsigned long nr,
285	volatile unsigned long *addr)
286{
287	int bit = nr & SZLONG_MASK;
288	unsigned long res;
289
290	if (kernel_uses_llsc && R10000_LLSC_WAR) {
291		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
292		unsigned long temp;
293
294		__asm__ __volatile__(
295		"	.set	arch=r4000				\n"
296		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
297		"	or	%2, %0, %3				\n"
298		"	" __SC	"%2, %1					\n"
299		"	beqzl	%2, 1b					\n"
300		"	and	%2, %0, %3				\n"
301		"	.set	mips0					\n"
302		: "=&r" (temp), "+m" (*m), "=&r" (res)
303		: "r" (1UL << bit)
304		: "memory");
305	} else if (kernel_uses_llsc) {
306		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
307		unsigned long temp;
308
309		do {
310			__asm__ __volatile__(
311			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
312			"	" __LL "%0, %1	# test_and_set_bit	\n"
313			"	or	%2, %0, %3			\n"
314			"	" __SC	"%2, %1				\n"
315			"	.set	mips0				\n"
316			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
317			: "r" (1UL << bit)
318			: "memory");
319		} while (unlikely(!res));
320
321		res = temp & (1UL << bit);
322	} else
323		res = __mips_test_and_set_bit_lock(nr, addr);
324
325	smp_llsc_mb();
326
327	return res != 0;
328}
329/*
330 * test_and_clear_bit - Clear a bit and return its old value
331 * @nr: Bit to clear
332 * @addr: Address to count from
333 *
334 * This operation is atomic and cannot be reordered.
335 * It also implies a memory barrier.
336 */
337static inline int test_and_clear_bit(unsigned long nr,
338	volatile unsigned long *addr)
339{
340	int bit = nr & SZLONG_MASK;
341	unsigned long res;
 
342
343	smp_mb__before_llsc();
344
345	if (kernel_uses_llsc && R10000_LLSC_WAR) {
346		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
347		unsigned long temp;
348
349		__asm__ __volatile__(
350		"	.set	arch=r4000				\n"
351		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
352		"	or	%2, %0, %3				\n"
353		"	xor	%2, %3					\n"
354		"	" __SC	"%2, %1					\n"
355		"	beqzl	%2, 1b					\n"
356		"	and	%2, %0, %3				\n"
357		"	.set	mips0					\n"
358		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
359		: "r" (1UL << bit)
360		: "memory");
361#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
362	} else if (kernel_uses_llsc && __builtin_constant_p(nr)) {
363		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
364		unsigned long temp;
365
366		do {
367			__asm__ __volatile__(
368			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
369			"	" __EXT "%2, %0, %3, 1			\n"
370			"	" __INS "%0, $0, %3, 1			\n"
371			"	" __SC	"%0, %1				\n"
372			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
373			: "ir" (bit)
374			: "memory");
375		} while (unlikely(!temp));
376#endif
377	} else if (kernel_uses_llsc) {
378		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
379		unsigned long temp;
380
381		do {
382			__asm__ __volatile__(
383			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
384			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
385			"	or	%2, %0, %3			\n"
386			"	xor	%2, %3				\n"
387			"	" __SC	"%2, %1				\n"
388			"	.set	mips0				\n"
389			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
390			: "r" (1UL << bit)
391			: "memory");
392		} while (unlikely(!res));
393
394		res = temp & (1UL << bit);
395	} else
396		res = __mips_test_and_clear_bit(nr, addr);
 
 
 
 
 
 
 
 
 
 
 
 
397
398	smp_llsc_mb();
399
400	return res != 0;
401}
402
403/*
404 * test_and_change_bit - Change a bit and return its old value
405 * @nr: Bit to change
406 * @addr: Address to count from
407 *
408 * This operation is atomic and cannot be reordered.
409 * It also implies a memory barrier.
410 */
411static inline int test_and_change_bit(unsigned long nr,
412	volatile unsigned long *addr)
413{
414	int bit = nr & SZLONG_MASK;
415	unsigned long res;
 
416
417	smp_mb__before_llsc();
418
419	if (kernel_uses_llsc && R10000_LLSC_WAR) {
420		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
421		unsigned long temp;
422
423		__asm__ __volatile__(
424		"	.set	arch=r4000				\n"
425		"1:	" __LL	"%0, %1		# test_and_change_bit	\n"
426		"	xor	%2, %0, %3				\n"
427		"	" __SC	"%2, %1					\n"
428		"	beqzl	%2, 1b					\n"
429		"	and	%2, %0, %3				\n"
430		"	.set	mips0					\n"
431		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
432		: "r" (1UL << bit)
433		: "memory");
434	} else if (kernel_uses_llsc) {
435		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
436		unsigned long temp;
437
438		do {
439			__asm__ __volatile__(
440			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
441			"	" __LL	"%0, %1 # test_and_change_bit	\n"
442			"	xor	%2, %0, %3			\n"
443			"	" __SC	"\t%2, %1			\n"
444			"	.set	mips0				\n"
445			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res)
446			: "r" (1UL << bit)
447			: "memory");
448		} while (unlikely(!res));
449
450		res = temp & (1UL << bit);
451	} else
452		res = __mips_test_and_change_bit(nr, addr);
 
 
 
 
 
 
453
454	smp_llsc_mb();
455
456	return res != 0;
457}
458
 
 
 
459#include <asm-generic/bitops/non-atomic.h>
460
461/*
462 * __clear_bit_unlock - Clears a bit in memory
463 * @nr: Bit to clear
464 * @addr: Address to start counting from
465 *
466 * __clear_bit() is non-atomic and implies release semantics before the memory
467 * operation. It can be used for an unlock if no other CPUs can concurrently
468 * modify other bits in the word.
469 */
470static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
471{
472	smp_mb__before_llsc();
473	__clear_bit(nr, addr);
 
474}
475
476/*
477 * Return the bit position (0..63) of the most significant 1 bit in a word
478 * Returns -1 if no 1 bit exists
479 */
480static inline unsigned long __fls(unsigned long word)
481{
482	int num;
483
484	if (BITS_PER_LONG == 32 && !__builtin_constant_p(word) &&
485	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
486		__asm__(
487		"	.set	push					\n"
488		"	.set	"MIPS_ISA_LEVEL"			\n"
489		"	clz	%0, %1					\n"
490		"	.set	pop					\n"
491		: "=r" (num)
492		: "r" (word));
493
494		return 31 - num;
495	}
496
497	if (BITS_PER_LONG == 64 && !__builtin_constant_p(word) &&
498	    __builtin_constant_p(cpu_has_mips64) && cpu_has_mips64) {
499		__asm__(
500		"	.set	push					\n"
501		"	.set	"MIPS_ISA_LEVEL"			\n"
502		"	dclz	%0, %1					\n"
503		"	.set	pop					\n"
504		: "=r" (num)
505		: "r" (word));
506
507		return 63 - num;
508	}
509
510	num = BITS_PER_LONG - 1;
511
512#if BITS_PER_LONG == 64
513	if (!(word & (~0ul << 32))) {
514		num -= 32;
515		word <<= 32;
516	}
517#endif
518	if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
519		num -= 16;
520		word <<= 16;
521	}
522	if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
523		num -= 8;
524		word <<= 8;
525	}
526	if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
527		num -= 4;
528		word <<= 4;
529	}
530	if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
531		num -= 2;
532		word <<= 2;
533	}
534	if (!(word & (~0ul << (BITS_PER_LONG-1))))
535		num -= 1;
536	return num;
537}
538
539/*
540 * __ffs - find first bit in word.
541 * @word: The word to search
542 *
543 * Returns 0..SZLONG-1
544 * Undefined if no bit exists, so code should check against 0 first.
545 */
546static inline unsigned long __ffs(unsigned long word)
547{
548	return __fls(word & -word);
549}
550
551/*
552 * fls - find last bit set.
553 * @word: The word to search
554 *
555 * This is defined the same way as ffs.
556 * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
557 */
558static inline int fls(int x)
559{
560	int r;
561
562	if (!__builtin_constant_p(x) &&
563	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
564		__asm__(
565		"	.set	push					\n"
566		"	.set	"MIPS_ISA_LEVEL"			\n"
567		"	clz	%0, %1					\n"
568		"	.set	pop					\n"
569		: "=r" (x)
570		: "r" (x));
571
572		return 32 - x;
573	}
574
575	r = 32;
576	if (!x)
577		return 0;
578	if (!(x & 0xffff0000u)) {
579		x <<= 16;
580		r -= 16;
581	}
582	if (!(x & 0xff000000u)) {
583		x <<= 8;
584		r -= 8;
585	}
586	if (!(x & 0xf0000000u)) {
587		x <<= 4;
588		r -= 4;
589	}
590	if (!(x & 0xc0000000u)) {
591		x <<= 2;
592		r -= 2;
593	}
594	if (!(x & 0x80000000u)) {
595		x <<= 1;
596		r -= 1;
597	}
598	return r;
599}
600
601#include <asm-generic/bitops/fls64.h>
602
603/*
604 * ffs - find first bit set.
605 * @word: The word to search
606 *
607 * This is defined the same way as
608 * the libc and compiler builtin ffs routines, therefore
609 * differs in spirit from the above ffz (man ffs).
610 */
611static inline int ffs(int word)
612{
613	if (!word)
614		return 0;
615
616	return fls(word & -word);
617}
618
619#include <asm-generic/bitops/ffz.h>
620#include <asm-generic/bitops/find.h>
621
622#ifdef __KERNEL__
623
624#include <asm-generic/bitops/sched.h>
625
626#include <asm/arch_hweight.h>
627#include <asm-generic/bitops/const_hweight.h>
628
629#include <asm-generic/bitops/le.h>
630#include <asm-generic/bitops/ext2-atomic.h>
631
632#endif /* __KERNEL__ */
633
634#endif /* _ASM_BITOPS_H */