Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * USB Serial Converter driver
4 *
5 * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com)
6 * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
8 * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
9 *
10 * This driver was originally based on the ACM driver by Armin Fuerst (which was
11 * based on a driver by Brad Keryan)
12 *
13 * See Documentation/usb/usb-serial.rst for more information on using this
14 * driver
15 */
16
17#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18
19#include <linux/kernel.h>
20#include <linux/errno.h>
21#include <linux/init.h>
22#include <linux/slab.h>
23#include <linux/tty.h>
24#include <linux/tty_driver.h>
25#include <linux/tty_flip.h>
26#include <linux/module.h>
27#include <linux/moduleparam.h>
28#include <linux/seq_file.h>
29#include <linux/spinlock.h>
30#include <linux/mutex.h>
31#include <linux/list.h>
32#include <linux/uaccess.h>
33#include <linux/serial.h>
34#include <linux/usb.h>
35#include <linux/usb/serial.h>
36#include <linux/kfifo.h>
37#include <linux/idr.h>
38
39#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
40#define DRIVER_DESC "USB Serial Driver core"
41
42#define USB_SERIAL_TTY_MAJOR 188
43#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */
44
45/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
46 the MODULE_DEVICE_TABLE declarations in each serial driver
47 cause the "hotplug" program to pull in whatever module is necessary
48 via modprobe, and modprobe will load usbserial because the serial
49 drivers depend on it.
50*/
51
52static DEFINE_IDR(serial_minors);
53static DEFINE_MUTEX(table_lock);
54static LIST_HEAD(usb_serial_driver_list);
55
56/*
57 * Look up the serial port structure. If it is found and it hasn't been
58 * disconnected, return with the parent usb_serial structure's disc_mutex held
59 * and its refcount incremented. Otherwise return NULL.
60 */
61struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor)
62{
63 struct usb_serial *serial;
64 struct usb_serial_port *port;
65
66 mutex_lock(&table_lock);
67 port = idr_find(&serial_minors, minor);
68 if (!port)
69 goto exit;
70
71 serial = port->serial;
72 mutex_lock(&serial->disc_mutex);
73 if (serial->disconnected) {
74 mutex_unlock(&serial->disc_mutex);
75 port = NULL;
76 } else {
77 kref_get(&serial->kref);
78 }
79exit:
80 mutex_unlock(&table_lock);
81 return port;
82}
83
84static int allocate_minors(struct usb_serial *serial, int num_ports)
85{
86 struct usb_serial_port *port;
87 unsigned int i, j;
88 int minor;
89
90 dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
91
92 mutex_lock(&table_lock);
93 for (i = 0; i < num_ports; ++i) {
94 port = serial->port[i];
95 minor = idr_alloc(&serial_minors, port, 0,
96 USB_SERIAL_TTY_MINORS, GFP_KERNEL);
97 if (minor < 0)
98 goto error;
99 port->minor = minor;
100 port->port_number = i;
101 }
102 serial->minors_reserved = 1;
103 mutex_unlock(&table_lock);
104 return 0;
105error:
106 /* unwind the already allocated minors */
107 for (j = 0; j < i; ++j)
108 idr_remove(&serial_minors, serial->port[j]->minor);
109 mutex_unlock(&table_lock);
110 return minor;
111}
112
113static void release_minors(struct usb_serial *serial)
114{
115 int i;
116
117 mutex_lock(&table_lock);
118 for (i = 0; i < serial->num_ports; ++i)
119 idr_remove(&serial_minors, serial->port[i]->minor);
120 mutex_unlock(&table_lock);
121 serial->minors_reserved = 0;
122}
123
124static void destroy_serial(struct kref *kref)
125{
126 struct usb_serial *serial;
127 struct usb_serial_port *port;
128 int i;
129
130 serial = to_usb_serial(kref);
131
132 /* return the minor range that this device had */
133 if (serial->minors_reserved)
134 release_minors(serial);
135
136 if (serial->attached && serial->type->release)
137 serial->type->release(serial);
138
139 /* Now that nothing is using the ports, they can be freed */
140 for (i = 0; i < serial->num_port_pointers; ++i) {
141 port = serial->port[i];
142 if (port) {
143 port->serial = NULL;
144 put_device(&port->dev);
145 }
146 }
147
148 usb_put_intf(serial->interface);
149 usb_put_dev(serial->dev);
150 kfree(serial);
151}
152
153void usb_serial_put(struct usb_serial *serial)
154{
155 kref_put(&serial->kref, destroy_serial);
156}
157
158/*****************************************************************************
159 * Driver tty interface functions
160 *****************************************************************************/
161
162/**
163 * serial_install - install tty
164 * @driver: the driver (USB in our case)
165 * @tty: the tty being created
166 *
167 * Initialise the termios structure for this tty. We use the default
168 * USB serial settings but permit them to be overridden by
169 * serial->type->init_termios on first open.
170 *
171 * This is the first place a new tty gets used. Hence this is where we
172 * acquire references to the usb_serial structure and the driver module,
173 * where we store a pointer to the port, and where we do an autoresume.
174 * All these actions are reversed in serial_cleanup().
175 */
176static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
177{
178 int idx = tty->index;
179 struct usb_serial *serial;
180 struct usb_serial_port *port;
181 bool init_termios;
182 int retval = -ENODEV;
183
184 port = usb_serial_port_get_by_minor(idx);
185 if (!port)
186 return retval;
187
188 serial = port->serial;
189 if (!try_module_get(serial->type->driver.owner))
190 goto error_module_get;
191
192 retval = usb_autopm_get_interface(serial->interface);
193 if (retval)
194 goto error_get_interface;
195
196 init_termios = (driver->termios[idx] == NULL);
197
198 retval = tty_standard_install(driver, tty);
199 if (retval)
200 goto error_init_termios;
201
202 mutex_unlock(&serial->disc_mutex);
203
204 /* allow the driver to update the initial settings */
205 if (init_termios && serial->type->init_termios)
206 serial->type->init_termios(tty);
207
208 tty->driver_data = port;
209
210 return retval;
211
212 error_init_termios:
213 usb_autopm_put_interface(serial->interface);
214 error_get_interface:
215 module_put(serial->type->driver.owner);
216 error_module_get:
217 usb_serial_put(serial);
218 mutex_unlock(&serial->disc_mutex);
219 return retval;
220}
221
222static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
223{
224 struct usb_serial_port *port =
225 container_of(tport, struct usb_serial_port, port);
226 struct usb_serial *serial = port->serial;
227 int retval;
228
229 mutex_lock(&serial->disc_mutex);
230 if (serial->disconnected)
231 retval = -ENODEV;
232 else
233 retval = port->serial->type->open(tty, port);
234 mutex_unlock(&serial->disc_mutex);
235
236 if (retval < 0)
237 retval = usb_translate_errors(retval);
238
239 return retval;
240}
241
242static int serial_open(struct tty_struct *tty, struct file *filp)
243{
244 struct usb_serial_port *port = tty->driver_data;
245
246 dev_dbg(tty->dev, "%s\n", __func__);
247
248 return tty_port_open(&port->port, tty, filp);
249}
250
251/**
252 * serial_port_shutdown - shut down hardware
253 * @tport: tty port to shut down
254 *
255 * Shut down a USB serial port. Serialized against activate by the
256 * tport mutex and kept to matching open/close pairs
257 * of calls by the initialized flag.
258 *
259 * Not called if tty is console.
260 */
261static void serial_port_shutdown(struct tty_port *tport)
262{
263 struct usb_serial_port *port =
264 container_of(tport, struct usb_serial_port, port);
265 struct usb_serial_driver *drv = port->serial->type;
266
267 if (drv->close)
268 drv->close(port);
269}
270
271static void serial_hangup(struct tty_struct *tty)
272{
273 struct usb_serial_port *port = tty->driver_data;
274
275 dev_dbg(tty->dev, "%s\n", __func__);
276
277 tty_port_hangup(&port->port);
278}
279
280static void serial_close(struct tty_struct *tty, struct file *filp)
281{
282 struct usb_serial_port *port = tty->driver_data;
283
284 dev_dbg(tty->dev, "%s\n", __func__);
285
286 tty_port_close(&port->port, tty, filp);
287}
288
289/**
290 * serial_cleanup - free resources post close/hangup
291 * @tty: tty to clean up
292 *
293 * Do the resource freeing and refcount dropping for the port.
294 * Avoid freeing the console.
295 *
296 * Called asynchronously after the last tty kref is dropped.
297 */
298static void serial_cleanup(struct tty_struct *tty)
299{
300 struct usb_serial_port *port = tty->driver_data;
301 struct usb_serial *serial;
302 struct module *owner;
303
304 dev_dbg(tty->dev, "%s\n", __func__);
305
306 /* The console is magical. Do not hang up the console hardware
307 * or there will be tears.
308 */
309 if (port->port.console)
310 return;
311
312 tty->driver_data = NULL;
313
314 serial = port->serial;
315 owner = serial->type->driver.owner;
316
317 usb_autopm_put_interface(serial->interface);
318
319 usb_serial_put(serial);
320 module_put(owner);
321}
322
323static int serial_write(struct tty_struct *tty, const unsigned char *buf,
324 int count)
325{
326 struct usb_serial_port *port = tty->driver_data;
327 int retval = -ENODEV;
328
329 if (port->serial->dev->state == USB_STATE_NOTATTACHED)
330 goto exit;
331
332 dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count);
333
334 retval = port->serial->type->write(tty, port, buf, count);
335 if (retval < 0)
336 retval = usb_translate_errors(retval);
337exit:
338 return retval;
339}
340
341static int serial_write_room(struct tty_struct *tty)
342{
343 struct usb_serial_port *port = tty->driver_data;
344
345 dev_dbg(tty->dev, "%s\n", __func__);
346
347 return port->serial->type->write_room(tty);
348}
349
350static int serial_chars_in_buffer(struct tty_struct *tty)
351{
352 struct usb_serial_port *port = tty->driver_data;
353 struct usb_serial *serial = port->serial;
354
355 dev_dbg(tty->dev, "%s\n", __func__);
356
357 if (serial->disconnected)
358 return 0;
359
360 return serial->type->chars_in_buffer(tty);
361}
362
363static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
364{
365 struct usb_serial_port *port = tty->driver_data;
366 struct usb_serial *serial = port->serial;
367
368 dev_dbg(tty->dev, "%s\n", __func__);
369
370 if (!port->serial->type->wait_until_sent)
371 return;
372
373 mutex_lock(&serial->disc_mutex);
374 if (!serial->disconnected)
375 port->serial->type->wait_until_sent(tty, timeout);
376 mutex_unlock(&serial->disc_mutex);
377}
378
379static void serial_throttle(struct tty_struct *tty)
380{
381 struct usb_serial_port *port = tty->driver_data;
382
383 dev_dbg(tty->dev, "%s\n", __func__);
384
385 if (port->serial->type->throttle)
386 port->serial->type->throttle(tty);
387}
388
389static void serial_unthrottle(struct tty_struct *tty)
390{
391 struct usb_serial_port *port = tty->driver_data;
392
393 dev_dbg(tty->dev, "%s\n", __func__);
394
395 if (port->serial->type->unthrottle)
396 port->serial->type->unthrottle(tty);
397}
398
399static int serial_get_serial(struct tty_struct *tty, struct serial_struct *ss)
400{
401 struct usb_serial_port *port = tty->driver_data;
402
403 if (port->serial->type->get_serial)
404 return port->serial->type->get_serial(tty, ss);
405 return -ENOTTY;
406}
407
408static int serial_set_serial(struct tty_struct *tty, struct serial_struct *ss)
409{
410 struct usb_serial_port *port = tty->driver_data;
411
412 if (port->serial->type->set_serial)
413 return port->serial->type->set_serial(tty, ss);
414 return -ENOTTY;
415}
416
417static int serial_ioctl(struct tty_struct *tty,
418 unsigned int cmd, unsigned long arg)
419{
420 struct usb_serial_port *port = tty->driver_data;
421 int retval = -ENOIOCTLCMD;
422
423 dev_dbg(tty->dev, "%s - cmd 0x%04x\n", __func__, cmd);
424
425 switch (cmd) {
426 case TIOCMIWAIT:
427 if (port->serial->type->tiocmiwait)
428 retval = port->serial->type->tiocmiwait(tty, arg);
429 break;
430 default:
431 if (port->serial->type->ioctl)
432 retval = port->serial->type->ioctl(tty, cmd, arg);
433 }
434
435 return retval;
436}
437
438static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
439{
440 struct usb_serial_port *port = tty->driver_data;
441
442 dev_dbg(tty->dev, "%s\n", __func__);
443
444 if (port->serial->type->set_termios)
445 port->serial->type->set_termios(tty, port, old);
446 else
447 tty_termios_copy_hw(&tty->termios, old);
448}
449
450static int serial_break(struct tty_struct *tty, int break_state)
451{
452 struct usb_serial_port *port = tty->driver_data;
453
454 dev_dbg(tty->dev, "%s\n", __func__);
455
456 if (port->serial->type->break_ctl)
457 port->serial->type->break_ctl(tty, break_state);
458
459 return 0;
460}
461
462static int serial_proc_show(struct seq_file *m, void *v)
463{
464 struct usb_serial *serial;
465 struct usb_serial_port *port;
466 int i;
467 char tmp[40];
468
469 seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
470 for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
471 port = usb_serial_port_get_by_minor(i);
472 if (port == NULL)
473 continue;
474 serial = port->serial;
475
476 seq_printf(m, "%d:", i);
477 if (serial->type->driver.owner)
478 seq_printf(m, " module:%s",
479 module_name(serial->type->driver.owner));
480 seq_printf(m, " name:\"%s\"",
481 serial->type->description);
482 seq_printf(m, " vendor:%04x product:%04x",
483 le16_to_cpu(serial->dev->descriptor.idVendor),
484 le16_to_cpu(serial->dev->descriptor.idProduct));
485 seq_printf(m, " num_ports:%d", serial->num_ports);
486 seq_printf(m, " port:%d", port->port_number);
487 usb_make_path(serial->dev, tmp, sizeof(tmp));
488 seq_printf(m, " path:%s", tmp);
489
490 seq_putc(m, '\n');
491 usb_serial_put(serial);
492 mutex_unlock(&serial->disc_mutex);
493 }
494 return 0;
495}
496
497static int serial_tiocmget(struct tty_struct *tty)
498{
499 struct usb_serial_port *port = tty->driver_data;
500
501 dev_dbg(tty->dev, "%s\n", __func__);
502
503 if (port->serial->type->tiocmget)
504 return port->serial->type->tiocmget(tty);
505 return -EINVAL;
506}
507
508static int serial_tiocmset(struct tty_struct *tty,
509 unsigned int set, unsigned int clear)
510{
511 struct usb_serial_port *port = tty->driver_data;
512
513 dev_dbg(tty->dev, "%s\n", __func__);
514
515 if (port->serial->type->tiocmset)
516 return port->serial->type->tiocmset(tty, set, clear);
517 return -EINVAL;
518}
519
520static int serial_get_icount(struct tty_struct *tty,
521 struct serial_icounter_struct *icount)
522{
523 struct usb_serial_port *port = tty->driver_data;
524
525 dev_dbg(tty->dev, "%s\n", __func__);
526
527 if (port->serial->type->get_icount)
528 return port->serial->type->get_icount(tty, icount);
529 return -EINVAL;
530}
531
532/*
533 * We would be calling tty_wakeup here, but unfortunately some line
534 * disciplines have an annoying habit of calling tty->write from
535 * the write wakeup callback (e.g. n_hdlc.c).
536 */
537void usb_serial_port_softint(struct usb_serial_port *port)
538{
539 schedule_work(&port->work);
540}
541EXPORT_SYMBOL_GPL(usb_serial_port_softint);
542
543static void usb_serial_port_work(struct work_struct *work)
544{
545 struct usb_serial_port *port =
546 container_of(work, struct usb_serial_port, work);
547
548 tty_port_tty_wakeup(&port->port);
549}
550
551static void usb_serial_port_poison_urbs(struct usb_serial_port *port)
552{
553 int i;
554
555 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
556 usb_poison_urb(port->read_urbs[i]);
557 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
558 usb_poison_urb(port->write_urbs[i]);
559
560 usb_poison_urb(port->interrupt_in_urb);
561 usb_poison_urb(port->interrupt_out_urb);
562}
563
564static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port)
565{
566 int i;
567
568 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
569 usb_unpoison_urb(port->read_urbs[i]);
570 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
571 usb_unpoison_urb(port->write_urbs[i]);
572
573 usb_unpoison_urb(port->interrupt_in_urb);
574 usb_unpoison_urb(port->interrupt_out_urb);
575}
576
577static void usb_serial_port_release(struct device *dev)
578{
579 struct usb_serial_port *port = to_usb_serial_port(dev);
580 int i;
581
582 dev_dbg(dev, "%s\n", __func__);
583
584 usb_free_urb(port->interrupt_in_urb);
585 usb_free_urb(port->interrupt_out_urb);
586 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
587 usb_free_urb(port->read_urbs[i]);
588 kfree(port->bulk_in_buffers[i]);
589 }
590 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
591 usb_free_urb(port->write_urbs[i]);
592 kfree(port->bulk_out_buffers[i]);
593 }
594 kfifo_free(&port->write_fifo);
595 kfree(port->interrupt_in_buffer);
596 kfree(port->interrupt_out_buffer);
597 tty_port_destroy(&port->port);
598 kfree(port);
599}
600
601static struct usb_serial *create_serial(struct usb_device *dev,
602 struct usb_interface *interface,
603 struct usb_serial_driver *driver)
604{
605 struct usb_serial *serial;
606
607 serial = kzalloc(sizeof(*serial), GFP_KERNEL);
608 if (!serial)
609 return NULL;
610 serial->dev = usb_get_dev(dev);
611 serial->type = driver;
612 serial->interface = usb_get_intf(interface);
613 kref_init(&serial->kref);
614 mutex_init(&serial->disc_mutex);
615 serial->minors_reserved = 0;
616
617 return serial;
618}
619
620static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
621 struct usb_serial_driver *drv)
622{
623 struct usb_dynid *dynid;
624
625 spin_lock(&drv->dynids.lock);
626 list_for_each_entry(dynid, &drv->dynids.list, node) {
627 if (usb_match_one_id(intf, &dynid->id)) {
628 spin_unlock(&drv->dynids.lock);
629 return &dynid->id;
630 }
631 }
632 spin_unlock(&drv->dynids.lock);
633 return NULL;
634}
635
636static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
637 struct usb_interface *intf)
638{
639 const struct usb_device_id *id;
640
641 id = usb_match_id(intf, drv->id_table);
642 if (id) {
643 dev_dbg(&intf->dev, "static descriptor matches\n");
644 goto exit;
645 }
646 id = match_dynamic_id(intf, drv);
647 if (id)
648 dev_dbg(&intf->dev, "dynamic descriptor matches\n");
649exit:
650 return id;
651}
652
653/* Caller must hold table_lock */
654static struct usb_serial_driver *search_serial_device(
655 struct usb_interface *iface)
656{
657 const struct usb_device_id *id = NULL;
658 struct usb_serial_driver *drv;
659 struct usb_driver *driver = to_usb_driver(iface->dev.driver);
660
661 /* Check if the usb id matches a known device */
662 list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
663 if (drv->usb_driver == driver)
664 id = get_iface_id(drv, iface);
665 if (id)
666 return drv;
667 }
668
669 return NULL;
670}
671
672static int serial_port_carrier_raised(struct tty_port *port)
673{
674 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
675 struct usb_serial_driver *drv = p->serial->type;
676
677 if (drv->carrier_raised)
678 return drv->carrier_raised(p);
679 /* No carrier control - don't block */
680 return 1;
681}
682
683static void serial_port_dtr_rts(struct tty_port *port, int on)
684{
685 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
686 struct usb_serial_driver *drv = p->serial->type;
687
688 if (drv->dtr_rts)
689 drv->dtr_rts(p, on);
690}
691
692static ssize_t port_number_show(struct device *dev,
693 struct device_attribute *attr, char *buf)
694{
695 struct usb_serial_port *port = to_usb_serial_port(dev);
696
697 return sprintf(buf, "%u\n", port->port_number);
698}
699static DEVICE_ATTR_RO(port_number);
700
701static struct attribute *usb_serial_port_attrs[] = {
702 &dev_attr_port_number.attr,
703 NULL
704};
705ATTRIBUTE_GROUPS(usb_serial_port);
706
707static const struct tty_port_operations serial_port_ops = {
708 .carrier_raised = serial_port_carrier_raised,
709 .dtr_rts = serial_port_dtr_rts,
710 .activate = serial_port_activate,
711 .shutdown = serial_port_shutdown,
712};
713
714static void find_endpoints(struct usb_serial *serial,
715 struct usb_serial_endpoints *epds)
716{
717 struct device *dev = &serial->interface->dev;
718 struct usb_host_interface *iface_desc;
719 struct usb_endpoint_descriptor *epd;
720 unsigned int i;
721
722 BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_in) < USB_MAXENDPOINTS / 2);
723 BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < USB_MAXENDPOINTS / 2);
724 BUILD_BUG_ON(ARRAY_SIZE(epds->interrupt_in) < USB_MAXENDPOINTS / 2);
725 BUILD_BUG_ON(ARRAY_SIZE(epds->interrupt_out) < USB_MAXENDPOINTS / 2);
726
727 iface_desc = serial->interface->cur_altsetting;
728 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
729 epd = &iface_desc->endpoint[i].desc;
730
731 if (usb_endpoint_is_bulk_in(epd)) {
732 dev_dbg(dev, "found bulk in on endpoint %u\n", i);
733 epds->bulk_in[epds->num_bulk_in++] = epd;
734 } else if (usb_endpoint_is_bulk_out(epd)) {
735 dev_dbg(dev, "found bulk out on endpoint %u\n", i);
736 epds->bulk_out[epds->num_bulk_out++] = epd;
737 } else if (usb_endpoint_is_int_in(epd)) {
738 dev_dbg(dev, "found interrupt in on endpoint %u\n", i);
739 epds->interrupt_in[epds->num_interrupt_in++] = epd;
740 } else if (usb_endpoint_is_int_out(epd)) {
741 dev_dbg(dev, "found interrupt out on endpoint %u\n", i);
742 epds->interrupt_out[epds->num_interrupt_out++] = epd;
743 }
744 }
745}
746
747static int setup_port_bulk_in(struct usb_serial_port *port,
748 struct usb_endpoint_descriptor *epd)
749{
750 struct usb_serial_driver *type = port->serial->type;
751 struct usb_device *udev = port->serial->dev;
752 int buffer_size;
753 int i;
754
755 buffer_size = max_t(int, type->bulk_in_size, usb_endpoint_maxp(epd));
756 port->bulk_in_size = buffer_size;
757 port->bulk_in_endpointAddress = epd->bEndpointAddress;
758
759 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
760 set_bit(i, &port->read_urbs_free);
761 port->read_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
762 if (!port->read_urbs[i])
763 return -ENOMEM;
764 port->bulk_in_buffers[i] = kmalloc(buffer_size, GFP_KERNEL);
765 if (!port->bulk_in_buffers[i])
766 return -ENOMEM;
767 usb_fill_bulk_urb(port->read_urbs[i], udev,
768 usb_rcvbulkpipe(udev, epd->bEndpointAddress),
769 port->bulk_in_buffers[i], buffer_size,
770 type->read_bulk_callback, port);
771 }
772
773 port->read_urb = port->read_urbs[0];
774 port->bulk_in_buffer = port->bulk_in_buffers[0];
775
776 return 0;
777}
778
779static int setup_port_bulk_out(struct usb_serial_port *port,
780 struct usb_endpoint_descriptor *epd)
781{
782 struct usb_serial_driver *type = port->serial->type;
783 struct usb_device *udev = port->serial->dev;
784 int buffer_size;
785 int i;
786
787 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
788 return -ENOMEM;
789 if (type->bulk_out_size)
790 buffer_size = type->bulk_out_size;
791 else
792 buffer_size = usb_endpoint_maxp(epd);
793 port->bulk_out_size = buffer_size;
794 port->bulk_out_endpointAddress = epd->bEndpointAddress;
795
796 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
797 set_bit(i, &port->write_urbs_free);
798 port->write_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
799 if (!port->write_urbs[i])
800 return -ENOMEM;
801 port->bulk_out_buffers[i] = kmalloc(buffer_size, GFP_KERNEL);
802 if (!port->bulk_out_buffers[i])
803 return -ENOMEM;
804 usb_fill_bulk_urb(port->write_urbs[i], udev,
805 usb_sndbulkpipe(udev, epd->bEndpointAddress),
806 port->bulk_out_buffers[i], buffer_size,
807 type->write_bulk_callback, port);
808 }
809
810 port->write_urb = port->write_urbs[0];
811 port->bulk_out_buffer = port->bulk_out_buffers[0];
812
813 return 0;
814}
815
816static int setup_port_interrupt_in(struct usb_serial_port *port,
817 struct usb_endpoint_descriptor *epd)
818{
819 struct usb_serial_driver *type = port->serial->type;
820 struct usb_device *udev = port->serial->dev;
821 int buffer_size;
822
823 port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
824 if (!port->interrupt_in_urb)
825 return -ENOMEM;
826 buffer_size = usb_endpoint_maxp(epd);
827 port->interrupt_in_endpointAddress = epd->bEndpointAddress;
828 port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
829 if (!port->interrupt_in_buffer)
830 return -ENOMEM;
831 usb_fill_int_urb(port->interrupt_in_urb, udev,
832 usb_rcvintpipe(udev, epd->bEndpointAddress),
833 port->interrupt_in_buffer, buffer_size,
834 type->read_int_callback, port,
835 epd->bInterval);
836
837 return 0;
838}
839
840static int setup_port_interrupt_out(struct usb_serial_port *port,
841 struct usb_endpoint_descriptor *epd)
842{
843 struct usb_serial_driver *type = port->serial->type;
844 struct usb_device *udev = port->serial->dev;
845 int buffer_size;
846
847 port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
848 if (!port->interrupt_out_urb)
849 return -ENOMEM;
850 buffer_size = usb_endpoint_maxp(epd);
851 port->interrupt_out_size = buffer_size;
852 port->interrupt_out_endpointAddress = epd->bEndpointAddress;
853 port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
854 if (!port->interrupt_out_buffer)
855 return -ENOMEM;
856 usb_fill_int_urb(port->interrupt_out_urb, udev,
857 usb_sndintpipe(udev, epd->bEndpointAddress),
858 port->interrupt_out_buffer, buffer_size,
859 type->write_int_callback, port,
860 epd->bInterval);
861
862 return 0;
863}
864
865static int usb_serial_probe(struct usb_interface *interface,
866 const struct usb_device_id *id)
867{
868 struct device *ddev = &interface->dev;
869 struct usb_device *dev = interface_to_usbdev(interface);
870 struct usb_serial *serial = NULL;
871 struct usb_serial_port *port;
872 struct usb_serial_endpoints *epds;
873 struct usb_serial_driver *type = NULL;
874 int retval;
875 int i;
876 int num_ports = 0;
877 unsigned char max_endpoints;
878
879 mutex_lock(&table_lock);
880 type = search_serial_device(interface);
881 if (!type) {
882 mutex_unlock(&table_lock);
883 dev_dbg(ddev, "none matched\n");
884 return -ENODEV;
885 }
886
887 if (!try_module_get(type->driver.owner)) {
888 mutex_unlock(&table_lock);
889 dev_err(ddev, "module get failed, exiting\n");
890 return -EIO;
891 }
892 mutex_unlock(&table_lock);
893
894 serial = create_serial(dev, interface, type);
895 if (!serial) {
896 retval = -ENOMEM;
897 goto err_put_module;
898 }
899
900 /* if this device type has a probe function, call it */
901 if (type->probe) {
902 const struct usb_device_id *id;
903
904 id = get_iface_id(type, interface);
905 retval = type->probe(serial, id);
906
907 if (retval) {
908 dev_dbg(ddev, "sub driver rejected device\n");
909 goto err_put_serial;
910 }
911 }
912
913 /* descriptor matches, let's find the endpoints needed */
914 epds = kzalloc(sizeof(*epds), GFP_KERNEL);
915 if (!epds) {
916 retval = -ENOMEM;
917 goto err_put_serial;
918 }
919
920 find_endpoints(serial, epds);
921
922 if (epds->num_bulk_in < type->num_bulk_in ||
923 epds->num_bulk_out < type->num_bulk_out ||
924 epds->num_interrupt_in < type->num_interrupt_in ||
925 epds->num_interrupt_out < type->num_interrupt_out) {
926 dev_err(ddev, "required endpoints missing\n");
927 retval = -ENODEV;
928 goto err_free_epds;
929 }
930
931 if (type->calc_num_ports) {
932 retval = type->calc_num_ports(serial, epds);
933 if (retval < 0)
934 goto err_free_epds;
935 num_ports = retval;
936 }
937
938 if (!num_ports)
939 num_ports = type->num_ports;
940
941 if (num_ports > MAX_NUM_PORTS) {
942 dev_warn(ddev, "too many ports requested: %d\n", num_ports);
943 num_ports = MAX_NUM_PORTS;
944 }
945
946 serial->num_ports = (unsigned char)num_ports;
947 serial->num_bulk_in = epds->num_bulk_in;
948 serial->num_bulk_out = epds->num_bulk_out;
949 serial->num_interrupt_in = epds->num_interrupt_in;
950 serial->num_interrupt_out = epds->num_interrupt_out;
951
952 /* found all that we need */
953 dev_info(ddev, "%s converter detected\n", type->description);
954
955 /* create our ports, we need as many as the max endpoints */
956 /* we don't use num_ports here because some devices have more
957 endpoint pairs than ports */
958 max_endpoints = max(epds->num_bulk_in, epds->num_bulk_out);
959 max_endpoints = max(max_endpoints, epds->num_interrupt_in);
960 max_endpoints = max(max_endpoints, epds->num_interrupt_out);
961 max_endpoints = max(max_endpoints, serial->num_ports);
962 serial->num_port_pointers = max_endpoints;
963
964 dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
965 for (i = 0; i < max_endpoints; ++i) {
966 port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
967 if (!port) {
968 retval = -ENOMEM;
969 goto err_free_epds;
970 }
971 tty_port_init(&port->port);
972 port->port.ops = &serial_port_ops;
973 port->serial = serial;
974 spin_lock_init(&port->lock);
975 /* Keep this for private driver use for the moment but
976 should probably go away */
977 INIT_WORK(&port->work, usb_serial_port_work);
978 serial->port[i] = port;
979 port->dev.parent = &interface->dev;
980 port->dev.driver = NULL;
981 port->dev.bus = &usb_serial_bus_type;
982 port->dev.release = &usb_serial_port_release;
983 port->dev.groups = usb_serial_port_groups;
984 device_initialize(&port->dev);
985 }
986
987 /* set up the endpoint information */
988 for (i = 0; i < epds->num_bulk_in; ++i) {
989 retval = setup_port_bulk_in(serial->port[i], epds->bulk_in[i]);
990 if (retval)
991 goto err_free_epds;
992 }
993
994 for (i = 0; i < epds->num_bulk_out; ++i) {
995 retval = setup_port_bulk_out(serial->port[i],
996 epds->bulk_out[i]);
997 if (retval)
998 goto err_free_epds;
999 }
1000
1001 if (serial->type->read_int_callback) {
1002 for (i = 0; i < epds->num_interrupt_in; ++i) {
1003 retval = setup_port_interrupt_in(serial->port[i],
1004 epds->interrupt_in[i]);
1005 if (retval)
1006 goto err_free_epds;
1007 }
1008 } else if (epds->num_interrupt_in) {
1009 dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
1010 }
1011
1012 if (serial->type->write_int_callback) {
1013 for (i = 0; i < epds->num_interrupt_out; ++i) {
1014 retval = setup_port_interrupt_out(serial->port[i],
1015 epds->interrupt_out[i]);
1016 if (retval)
1017 goto err_free_epds;
1018 }
1019 } else if (epds->num_interrupt_out) {
1020 dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
1021 }
1022
1023 usb_set_intfdata(interface, serial);
1024
1025 /* if this device type has an attach function, call it */
1026 if (type->attach) {
1027 retval = type->attach(serial);
1028 if (retval < 0)
1029 goto err_free_epds;
1030 serial->attached = 1;
1031 if (retval > 0) {
1032 /* quietly accept this device, but don't bind to a
1033 serial port as it's about to disappear */
1034 serial->num_ports = 0;
1035 goto exit;
1036 }
1037 } else {
1038 serial->attached = 1;
1039 }
1040
1041 retval = allocate_minors(serial, num_ports);
1042 if (retval) {
1043 dev_err(ddev, "No more free serial minor numbers\n");
1044 goto err_free_epds;
1045 }
1046
1047 /* register all of the individual ports with the driver core */
1048 for (i = 0; i < num_ports; ++i) {
1049 port = serial->port[i];
1050 dev_set_name(&port->dev, "ttyUSB%d", port->minor);
1051 dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
1052 device_enable_async_suspend(&port->dev);
1053
1054 retval = device_add(&port->dev);
1055 if (retval)
1056 dev_err(ddev, "Error registering port device, continuing\n");
1057 }
1058
1059 if (num_ports > 0)
1060 usb_serial_console_init(serial->port[0]->minor);
1061exit:
1062 kfree(epds);
1063 module_put(type->driver.owner);
1064 return 0;
1065
1066err_free_epds:
1067 kfree(epds);
1068err_put_serial:
1069 usb_serial_put(serial);
1070err_put_module:
1071 module_put(type->driver.owner);
1072
1073 return retval;
1074}
1075
1076static void usb_serial_disconnect(struct usb_interface *interface)
1077{
1078 int i;
1079 struct usb_serial *serial = usb_get_intfdata(interface);
1080 struct device *dev = &interface->dev;
1081 struct usb_serial_port *port;
1082 struct tty_struct *tty;
1083
1084 usb_serial_console_disconnect(serial);
1085
1086 mutex_lock(&serial->disc_mutex);
1087 /* must set a flag, to signal subdrivers */
1088 serial->disconnected = 1;
1089 mutex_unlock(&serial->disc_mutex);
1090
1091 for (i = 0; i < serial->num_ports; ++i) {
1092 port = serial->port[i];
1093 tty = tty_port_tty_get(&port->port);
1094 if (tty) {
1095 tty_vhangup(tty);
1096 tty_kref_put(tty);
1097 }
1098 usb_serial_port_poison_urbs(port);
1099 wake_up_interruptible(&port->port.delta_msr_wait);
1100 cancel_work_sync(&port->work);
1101 if (device_is_registered(&port->dev))
1102 device_del(&port->dev);
1103 }
1104 if (serial->type->disconnect)
1105 serial->type->disconnect(serial);
1106
1107 /* let the last holder of this object cause it to be cleaned up */
1108 usb_serial_put(serial);
1109 dev_info(dev, "device disconnected\n");
1110}
1111
1112int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
1113{
1114 struct usb_serial *serial = usb_get_intfdata(intf);
1115 int i, r = 0;
1116
1117 serial->suspending = 1;
1118
1119 /*
1120 * serial->type->suspend() MUST return 0 in system sleep context,
1121 * otherwise, the resume callback has to recover device from
1122 * previous suspend failure.
1123 */
1124 if (serial->type->suspend) {
1125 r = serial->type->suspend(serial, message);
1126 if (r < 0) {
1127 serial->suspending = 0;
1128 goto err_out;
1129 }
1130 }
1131
1132 for (i = 0; i < serial->num_ports; ++i)
1133 usb_serial_port_poison_urbs(serial->port[i]);
1134err_out:
1135 return r;
1136}
1137EXPORT_SYMBOL(usb_serial_suspend);
1138
1139static void usb_serial_unpoison_port_urbs(struct usb_serial *serial)
1140{
1141 int i;
1142
1143 for (i = 0; i < serial->num_ports; ++i)
1144 usb_serial_port_unpoison_urbs(serial->port[i]);
1145}
1146
1147int usb_serial_resume(struct usb_interface *intf)
1148{
1149 struct usb_serial *serial = usb_get_intfdata(intf);
1150 int rv;
1151
1152 usb_serial_unpoison_port_urbs(serial);
1153
1154 serial->suspending = 0;
1155 if (serial->type->resume)
1156 rv = serial->type->resume(serial);
1157 else
1158 rv = usb_serial_generic_resume(serial);
1159
1160 return rv;
1161}
1162EXPORT_SYMBOL(usb_serial_resume);
1163
1164static int usb_serial_reset_resume(struct usb_interface *intf)
1165{
1166 struct usb_serial *serial = usb_get_intfdata(intf);
1167 int rv;
1168
1169 usb_serial_unpoison_port_urbs(serial);
1170
1171 serial->suspending = 0;
1172 if (serial->type->reset_resume) {
1173 rv = serial->type->reset_resume(serial);
1174 } else {
1175 rv = -EOPNOTSUPP;
1176 intf->needs_binding = 1;
1177 }
1178
1179 return rv;
1180}
1181
1182static const struct tty_operations serial_ops = {
1183 .open = serial_open,
1184 .close = serial_close,
1185 .write = serial_write,
1186 .hangup = serial_hangup,
1187 .write_room = serial_write_room,
1188 .ioctl = serial_ioctl,
1189 .set_termios = serial_set_termios,
1190 .throttle = serial_throttle,
1191 .unthrottle = serial_unthrottle,
1192 .break_ctl = serial_break,
1193 .chars_in_buffer = serial_chars_in_buffer,
1194 .wait_until_sent = serial_wait_until_sent,
1195 .tiocmget = serial_tiocmget,
1196 .tiocmset = serial_tiocmset,
1197 .get_icount = serial_get_icount,
1198 .set_serial = serial_set_serial,
1199 .get_serial = serial_get_serial,
1200 .cleanup = serial_cleanup,
1201 .install = serial_install,
1202 .proc_show = serial_proc_show,
1203};
1204
1205
1206struct tty_driver *usb_serial_tty_driver;
1207
1208static int __init usb_serial_init(void)
1209{
1210 int result;
1211
1212 usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS);
1213 if (!usb_serial_tty_driver)
1214 return -ENOMEM;
1215
1216 /* Initialize our global data */
1217 result = bus_register(&usb_serial_bus_type);
1218 if (result) {
1219 pr_err("%s - registering bus driver failed\n", __func__);
1220 goto exit_bus;
1221 }
1222
1223 usb_serial_tty_driver->driver_name = "usbserial";
1224 usb_serial_tty_driver->name = "ttyUSB";
1225 usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR;
1226 usb_serial_tty_driver->minor_start = 0;
1227 usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1228 usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1229 usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
1230 TTY_DRIVER_DYNAMIC_DEV;
1231 usb_serial_tty_driver->init_termios = tty_std_termios;
1232 usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
1233 | HUPCL | CLOCAL;
1234 usb_serial_tty_driver->init_termios.c_ispeed = 9600;
1235 usb_serial_tty_driver->init_termios.c_ospeed = 9600;
1236 tty_set_operations(usb_serial_tty_driver, &serial_ops);
1237 result = tty_register_driver(usb_serial_tty_driver);
1238 if (result) {
1239 pr_err("%s - tty_register_driver failed\n", __func__);
1240 goto exit_reg_driver;
1241 }
1242
1243 /* register the generic driver, if we should */
1244 result = usb_serial_generic_register();
1245 if (result < 0) {
1246 pr_err("%s - registering generic driver failed\n", __func__);
1247 goto exit_generic;
1248 }
1249
1250 return result;
1251
1252exit_generic:
1253 tty_unregister_driver(usb_serial_tty_driver);
1254
1255exit_reg_driver:
1256 bus_unregister(&usb_serial_bus_type);
1257
1258exit_bus:
1259 pr_err("%s - returning with error %d\n", __func__, result);
1260 put_tty_driver(usb_serial_tty_driver);
1261 return result;
1262}
1263
1264
1265static void __exit usb_serial_exit(void)
1266{
1267 usb_serial_console_exit();
1268
1269 usb_serial_generic_deregister();
1270
1271 tty_unregister_driver(usb_serial_tty_driver);
1272 put_tty_driver(usb_serial_tty_driver);
1273 bus_unregister(&usb_serial_bus_type);
1274 idr_destroy(&serial_minors);
1275}
1276
1277
1278module_init(usb_serial_init);
1279module_exit(usb_serial_exit);
1280
1281#define set_to_generic_if_null(type, function) \
1282 do { \
1283 if (!type->function) { \
1284 type->function = usb_serial_generic_##function; \
1285 pr_debug("%s: using generic " #function "\n", \
1286 type->driver.name); \
1287 } \
1288 } while (0)
1289
1290static void usb_serial_operations_init(struct usb_serial_driver *device)
1291{
1292 set_to_generic_if_null(device, open);
1293 set_to_generic_if_null(device, write);
1294 set_to_generic_if_null(device, close);
1295 set_to_generic_if_null(device, write_room);
1296 set_to_generic_if_null(device, chars_in_buffer);
1297 if (device->tx_empty)
1298 set_to_generic_if_null(device, wait_until_sent);
1299 set_to_generic_if_null(device, read_bulk_callback);
1300 set_to_generic_if_null(device, write_bulk_callback);
1301 set_to_generic_if_null(device, process_read_urb);
1302 set_to_generic_if_null(device, prepare_write_buffer);
1303}
1304
1305static int usb_serial_register(struct usb_serial_driver *driver)
1306{
1307 int retval;
1308
1309 if (usb_disabled())
1310 return -ENODEV;
1311
1312 if (!driver->description)
1313 driver->description = driver->driver.name;
1314 if (!driver->usb_driver) {
1315 WARN(1, "Serial driver %s has no usb_driver\n",
1316 driver->description);
1317 return -EINVAL;
1318 }
1319
1320 /* Prevent individual ports from being unbound. */
1321 driver->driver.suppress_bind_attrs = true;
1322
1323 usb_serial_operations_init(driver);
1324
1325 /* Add this device to our list of devices */
1326 mutex_lock(&table_lock);
1327 list_add(&driver->driver_list, &usb_serial_driver_list);
1328
1329 retval = usb_serial_bus_register(driver);
1330 if (retval) {
1331 pr_err("problem %d when registering driver %s\n", retval, driver->description);
1332 list_del(&driver->driver_list);
1333 } else {
1334 pr_info("USB Serial support registered for %s\n", driver->description);
1335 }
1336 mutex_unlock(&table_lock);
1337 return retval;
1338}
1339
1340static void usb_serial_deregister(struct usb_serial_driver *device)
1341{
1342 pr_info("USB Serial deregistering driver %s\n", device->description);
1343
1344 mutex_lock(&table_lock);
1345 list_del(&device->driver_list);
1346 mutex_unlock(&table_lock);
1347
1348 usb_serial_bus_deregister(device);
1349}
1350
1351/**
1352 * usb_serial_register_drivers - register drivers for a usb-serial module
1353 * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
1354 * @name: name of the usb_driver for this set of @serial_drivers
1355 * @id_table: list of all devices this @serial_drivers set binds to
1356 *
1357 * Registers all the drivers in the @serial_drivers array, and dynamically
1358 * creates a struct usb_driver with the name @name and id_table of @id_table.
1359 */
1360int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
1361 const char *name,
1362 const struct usb_device_id *id_table)
1363{
1364 int rc;
1365 struct usb_driver *udriver;
1366 struct usb_serial_driver * const *sd;
1367
1368 /*
1369 * udriver must be registered before any of the serial drivers,
1370 * because the store_new_id() routine for the serial drivers (in
1371 * bus.c) probes udriver.
1372 *
1373 * Performance hack: We don't want udriver to be probed until
1374 * the serial drivers are registered, because the probe would
1375 * simply fail for lack of a matching serial driver.
1376 * So we leave udriver's id_table set to NULL until we are all set.
1377 *
1378 * Suspend/resume support is implemented in the usb-serial core,
1379 * so fill in the PM-related fields in udriver.
1380 */
1381 udriver = kzalloc(sizeof(*udriver), GFP_KERNEL);
1382 if (!udriver)
1383 return -ENOMEM;
1384
1385 udriver->name = name;
1386 udriver->no_dynamic_id = 1;
1387 udriver->supports_autosuspend = 1;
1388 udriver->suspend = usb_serial_suspend;
1389 udriver->resume = usb_serial_resume;
1390 udriver->probe = usb_serial_probe;
1391 udriver->disconnect = usb_serial_disconnect;
1392
1393 /* we only set the reset_resume field if the serial_driver has one */
1394 for (sd = serial_drivers; *sd; ++sd) {
1395 if ((*sd)->reset_resume) {
1396 udriver->reset_resume = usb_serial_reset_resume;
1397 break;
1398 }
1399 }
1400
1401 rc = usb_register(udriver);
1402 if (rc)
1403 goto failed_usb_register;
1404
1405 for (sd = serial_drivers; *sd; ++sd) {
1406 (*sd)->usb_driver = udriver;
1407 rc = usb_serial_register(*sd);
1408 if (rc)
1409 goto failed;
1410 }
1411
1412 /* Now set udriver's id_table and look for matches */
1413 udriver->id_table = id_table;
1414 rc = driver_attach(&udriver->drvwrap.driver);
1415 return 0;
1416
1417 failed:
1418 while (sd-- > serial_drivers)
1419 usb_serial_deregister(*sd);
1420 usb_deregister(udriver);
1421failed_usb_register:
1422 kfree(udriver);
1423 return rc;
1424}
1425EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
1426
1427/**
1428 * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
1429 * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
1430 *
1431 * Deregisters all the drivers in the @serial_drivers array and deregisters and
1432 * frees the struct usb_driver that was created by the call to
1433 * usb_serial_register_drivers().
1434 */
1435void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[])
1436{
1437 struct usb_driver *udriver = (*serial_drivers)->usb_driver;
1438
1439 for (; *serial_drivers; ++serial_drivers)
1440 usb_serial_deregister(*serial_drivers);
1441 usb_deregister(udriver);
1442 kfree(udriver);
1443}
1444EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
1445
1446MODULE_AUTHOR(DRIVER_AUTHOR);
1447MODULE_DESCRIPTION(DRIVER_DESC);
1448MODULE_LICENSE("GPL v2");
1/*
2 * USB Serial Converter driver
3 *
4 * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com)
5 * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
6 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
7 * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License version
11 * 2 as published by the Free Software Foundation.
12 *
13 * This driver was originally based on the ACM driver by Armin Fuerst (which was
14 * based on a driver by Brad Keryan)
15 *
16 * See Documentation/usb/usb-serial.txt for more information on using this
17 * driver
18 */
19
20#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22#include <linux/kernel.h>
23#include <linux/errno.h>
24#include <linux/init.h>
25#include <linux/slab.h>
26#include <linux/tty.h>
27#include <linux/tty_driver.h>
28#include <linux/tty_flip.h>
29#include <linux/module.h>
30#include <linux/moduleparam.h>
31#include <linux/seq_file.h>
32#include <linux/spinlock.h>
33#include <linux/mutex.h>
34#include <linux/list.h>
35#include <linux/uaccess.h>
36#include <linux/serial.h>
37#include <linux/usb.h>
38#include <linux/usb/serial.h>
39#include <linux/kfifo.h>
40#include <linux/idr.h>
41#include "pl2303.h"
42
43#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
44#define DRIVER_DESC "USB Serial Driver core"
45
46#define USB_SERIAL_TTY_MAJOR 188
47#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */
48
49/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
50 the MODULE_DEVICE_TABLE declarations in each serial driver
51 cause the "hotplug" program to pull in whatever module is necessary
52 via modprobe, and modprobe will load usbserial because the serial
53 drivers depend on it.
54*/
55
56static DEFINE_IDR(serial_minors);
57static DEFINE_MUTEX(table_lock);
58static LIST_HEAD(usb_serial_driver_list);
59
60/*
61 * Look up the serial port structure. If it is found and it hasn't been
62 * disconnected, return with the parent usb_serial structure's disc_mutex held
63 * and its refcount incremented. Otherwise return NULL.
64 */
65struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor)
66{
67 struct usb_serial *serial;
68 struct usb_serial_port *port;
69
70 mutex_lock(&table_lock);
71 port = idr_find(&serial_minors, minor);
72 if (!port)
73 goto exit;
74
75 serial = port->serial;
76 mutex_lock(&serial->disc_mutex);
77 if (serial->disconnected) {
78 mutex_unlock(&serial->disc_mutex);
79 port = NULL;
80 } else {
81 kref_get(&serial->kref);
82 }
83exit:
84 mutex_unlock(&table_lock);
85 return port;
86}
87
88static int allocate_minors(struct usb_serial *serial, int num_ports)
89{
90 struct usb_serial_port *port;
91 unsigned int i, j;
92 int minor;
93
94 dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
95
96 mutex_lock(&table_lock);
97 for (i = 0; i < num_ports; ++i) {
98 port = serial->port[i];
99 minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL);
100 if (minor < 0)
101 goto error;
102 port->minor = minor;
103 port->port_number = i;
104 }
105 serial->minors_reserved = 1;
106 mutex_unlock(&table_lock);
107 return 0;
108error:
109 /* unwind the already allocated minors */
110 for (j = 0; j < i; ++j)
111 idr_remove(&serial_minors, serial->port[j]->minor);
112 mutex_unlock(&table_lock);
113 return minor;
114}
115
116static void release_minors(struct usb_serial *serial)
117{
118 int i;
119
120 mutex_lock(&table_lock);
121 for (i = 0; i < serial->num_ports; ++i)
122 idr_remove(&serial_minors, serial->port[i]->minor);
123 mutex_unlock(&table_lock);
124 serial->minors_reserved = 0;
125}
126
127static void destroy_serial(struct kref *kref)
128{
129 struct usb_serial *serial;
130 struct usb_serial_port *port;
131 int i;
132
133 serial = to_usb_serial(kref);
134
135 /* return the minor range that this device had */
136 if (serial->minors_reserved)
137 release_minors(serial);
138
139 if (serial->attached && serial->type->release)
140 serial->type->release(serial);
141
142 /* Now that nothing is using the ports, they can be freed */
143 for (i = 0; i < serial->num_port_pointers; ++i) {
144 port = serial->port[i];
145 if (port) {
146 port->serial = NULL;
147 put_device(&port->dev);
148 }
149 }
150
151 usb_put_intf(serial->interface);
152 usb_put_dev(serial->dev);
153 kfree(serial);
154}
155
156void usb_serial_put(struct usb_serial *serial)
157{
158 kref_put(&serial->kref, destroy_serial);
159}
160
161/*****************************************************************************
162 * Driver tty interface functions
163 *****************************************************************************/
164
165/**
166 * serial_install - install tty
167 * @driver: the driver (USB in our case)
168 * @tty: the tty being created
169 *
170 * Create the termios objects for this tty. We use the default
171 * USB serial settings but permit them to be overridden by
172 * serial->type->init_termios.
173 *
174 * This is the first place a new tty gets used. Hence this is where we
175 * acquire references to the usb_serial structure and the driver module,
176 * where we store a pointer to the port, and where we do an autoresume.
177 * All these actions are reversed in serial_cleanup().
178 */
179static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
180{
181 int idx = tty->index;
182 struct usb_serial *serial;
183 struct usb_serial_port *port;
184 int retval = -ENODEV;
185
186 port = usb_serial_port_get_by_minor(idx);
187 if (!port)
188 return retval;
189
190 serial = port->serial;
191 if (!try_module_get(serial->type->driver.owner))
192 goto error_module_get;
193
194 retval = usb_autopm_get_interface(serial->interface);
195 if (retval)
196 goto error_get_interface;
197
198 retval = tty_port_install(&port->port, driver, tty);
199 if (retval)
200 goto error_init_termios;
201
202 mutex_unlock(&serial->disc_mutex);
203
204 /* allow the driver to update the settings */
205 if (serial->type->init_termios)
206 serial->type->init_termios(tty);
207
208 tty->driver_data = port;
209
210 return retval;
211
212 error_init_termios:
213 usb_autopm_put_interface(serial->interface);
214 error_get_interface:
215 module_put(serial->type->driver.owner);
216 error_module_get:
217 usb_serial_put(serial);
218 mutex_unlock(&serial->disc_mutex);
219 return retval;
220}
221
222static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
223{
224 struct usb_serial_port *port =
225 container_of(tport, struct usb_serial_port, port);
226 struct usb_serial *serial = port->serial;
227 int retval;
228
229 mutex_lock(&serial->disc_mutex);
230 if (serial->disconnected)
231 retval = -ENODEV;
232 else
233 retval = port->serial->type->open(tty, port);
234 mutex_unlock(&serial->disc_mutex);
235
236 if (retval < 0)
237 retval = usb_translate_errors(retval);
238
239 return retval;
240}
241
242static int serial_open(struct tty_struct *tty, struct file *filp)
243{
244 struct usb_serial_port *port = tty->driver_data;
245
246 dev_dbg(tty->dev, "%s\n", __func__);
247
248 return tty_port_open(&port->port, tty, filp);
249}
250
251/**
252 * serial_port_shutdown - shut down hardware
253 * @tport: tty port to shut down
254 *
255 * Shut down a USB serial port. Serialized against activate by the
256 * tport mutex and kept to matching open/close pairs
257 * of calls by the ASYNCB_INITIALIZED flag.
258 *
259 * Not called if tty is console.
260 */
261static void serial_port_shutdown(struct tty_port *tport)
262{
263 struct usb_serial_port *port =
264 container_of(tport, struct usb_serial_port, port);
265 struct usb_serial_driver *drv = port->serial->type;
266
267 if (drv->close)
268 drv->close(port);
269}
270
271static void serial_hangup(struct tty_struct *tty)
272{
273 struct usb_serial_port *port = tty->driver_data;
274
275 dev_dbg(tty->dev, "%s\n", __func__);
276
277 tty_port_hangup(&port->port);
278}
279
280static void serial_close(struct tty_struct *tty, struct file *filp)
281{
282 struct usb_serial_port *port = tty->driver_data;
283
284 dev_dbg(tty->dev, "%s\n", __func__);
285
286 tty_port_close(&port->port, tty, filp);
287}
288
289/**
290 * serial_cleanup - free resources post close/hangup
291 * @port: port to free up
292 *
293 * Do the resource freeing and refcount dropping for the port.
294 * Avoid freeing the console.
295 *
296 * Called asynchronously after the last tty kref is dropped.
297 */
298static void serial_cleanup(struct tty_struct *tty)
299{
300 struct usb_serial_port *port = tty->driver_data;
301 struct usb_serial *serial;
302 struct module *owner;
303
304 dev_dbg(tty->dev, "%s\n", __func__);
305
306 /* The console is magical. Do not hang up the console hardware
307 * or there will be tears.
308 */
309 if (port->port.console)
310 return;
311
312 tty->driver_data = NULL;
313
314 serial = port->serial;
315 owner = serial->type->driver.owner;
316
317 mutex_lock(&serial->disc_mutex);
318 if (!serial->disconnected)
319 usb_autopm_put_interface(serial->interface);
320 mutex_unlock(&serial->disc_mutex);
321
322 usb_serial_put(serial);
323 module_put(owner);
324}
325
326static int serial_write(struct tty_struct *tty, const unsigned char *buf,
327 int count)
328{
329 struct usb_serial_port *port = tty->driver_data;
330 int retval = -ENODEV;
331
332 if (port->serial->dev->state == USB_STATE_NOTATTACHED)
333 goto exit;
334
335 dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count);
336
337 retval = port->serial->type->write(tty, port, buf, count);
338 if (retval < 0)
339 retval = usb_translate_errors(retval);
340exit:
341 return retval;
342}
343
344static int serial_write_room(struct tty_struct *tty)
345{
346 struct usb_serial_port *port = tty->driver_data;
347
348 dev_dbg(tty->dev, "%s\n", __func__);
349
350 return port->serial->type->write_room(tty);
351}
352
353static int serial_chars_in_buffer(struct tty_struct *tty)
354{
355 struct usb_serial_port *port = tty->driver_data;
356 struct usb_serial *serial = port->serial;
357
358 dev_dbg(tty->dev, "%s\n", __func__);
359
360 if (serial->disconnected)
361 return 0;
362
363 return serial->type->chars_in_buffer(tty);
364}
365
366static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
367{
368 struct usb_serial_port *port = tty->driver_data;
369 struct usb_serial *serial = port->serial;
370
371 dev_dbg(tty->dev, "%s\n", __func__);
372
373 if (!port->serial->type->wait_until_sent)
374 return;
375
376 mutex_lock(&serial->disc_mutex);
377 if (!serial->disconnected)
378 port->serial->type->wait_until_sent(tty, timeout);
379 mutex_unlock(&serial->disc_mutex);
380}
381
382static void serial_throttle(struct tty_struct *tty)
383{
384 struct usb_serial_port *port = tty->driver_data;
385
386 dev_dbg(tty->dev, "%s\n", __func__);
387
388 if (port->serial->type->throttle)
389 port->serial->type->throttle(tty);
390}
391
392static void serial_unthrottle(struct tty_struct *tty)
393{
394 struct usb_serial_port *port = tty->driver_data;
395
396 dev_dbg(tty->dev, "%s\n", __func__);
397
398 if (port->serial->type->unthrottle)
399 port->serial->type->unthrottle(tty);
400}
401
402static int serial_ioctl(struct tty_struct *tty,
403 unsigned int cmd, unsigned long arg)
404{
405 struct usb_serial_port *port = tty->driver_data;
406 int retval = -ENOIOCTLCMD;
407
408 dev_dbg(tty->dev, "%s - cmd 0x%04x\n", __func__, cmd);
409
410 switch (cmd) {
411 case TIOCMIWAIT:
412 if (port->serial->type->tiocmiwait)
413 retval = port->serial->type->tiocmiwait(tty, arg);
414 break;
415 default:
416 if (port->serial->type->ioctl)
417 retval = port->serial->type->ioctl(tty, cmd, arg);
418 }
419
420 return retval;
421}
422
423static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
424{
425 struct usb_serial_port *port = tty->driver_data;
426
427 dev_dbg(tty->dev, "%s\n", __func__);
428
429 if (port->serial->type->set_termios)
430 port->serial->type->set_termios(tty, port, old);
431 else
432 tty_termios_copy_hw(&tty->termios, old);
433}
434
435static int serial_break(struct tty_struct *tty, int break_state)
436{
437 struct usb_serial_port *port = tty->driver_data;
438
439 dev_dbg(tty->dev, "%s\n", __func__);
440
441 if (port->serial->type->break_ctl)
442 port->serial->type->break_ctl(tty, break_state);
443
444 return 0;
445}
446
447static int serial_proc_show(struct seq_file *m, void *v)
448{
449 struct usb_serial *serial;
450 struct usb_serial_port *port;
451 int i;
452 char tmp[40];
453
454 seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
455 for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
456 port = usb_serial_port_get_by_minor(i);
457 if (port == NULL)
458 continue;
459 serial = port->serial;
460
461 seq_printf(m, "%d:", i);
462 if (serial->type->driver.owner)
463 seq_printf(m, " module:%s",
464 module_name(serial->type->driver.owner));
465 seq_printf(m, " name:\"%s\"",
466 serial->type->description);
467 seq_printf(m, " vendor:%04x product:%04x",
468 le16_to_cpu(serial->dev->descriptor.idVendor),
469 le16_to_cpu(serial->dev->descriptor.idProduct));
470 seq_printf(m, " num_ports:%d", serial->num_ports);
471 seq_printf(m, " port:%d", port->port_number);
472 usb_make_path(serial->dev, tmp, sizeof(tmp));
473 seq_printf(m, " path:%s", tmp);
474
475 seq_putc(m, '\n');
476 usb_serial_put(serial);
477 mutex_unlock(&serial->disc_mutex);
478 }
479 return 0;
480}
481
482static int serial_proc_open(struct inode *inode, struct file *file)
483{
484 return single_open(file, serial_proc_show, NULL);
485}
486
487static const struct file_operations serial_proc_fops = {
488 .owner = THIS_MODULE,
489 .open = serial_proc_open,
490 .read = seq_read,
491 .llseek = seq_lseek,
492 .release = single_release,
493};
494
495static int serial_tiocmget(struct tty_struct *tty)
496{
497 struct usb_serial_port *port = tty->driver_data;
498
499 dev_dbg(tty->dev, "%s\n", __func__);
500
501 if (port->serial->type->tiocmget)
502 return port->serial->type->tiocmget(tty);
503 return -EINVAL;
504}
505
506static int serial_tiocmset(struct tty_struct *tty,
507 unsigned int set, unsigned int clear)
508{
509 struct usb_serial_port *port = tty->driver_data;
510
511 dev_dbg(tty->dev, "%s\n", __func__);
512
513 if (port->serial->type->tiocmset)
514 return port->serial->type->tiocmset(tty, set, clear);
515 return -EINVAL;
516}
517
518static int serial_get_icount(struct tty_struct *tty,
519 struct serial_icounter_struct *icount)
520{
521 struct usb_serial_port *port = tty->driver_data;
522
523 dev_dbg(tty->dev, "%s\n", __func__);
524
525 if (port->serial->type->get_icount)
526 return port->serial->type->get_icount(tty, icount);
527 return -EINVAL;
528}
529
530/*
531 * We would be calling tty_wakeup here, but unfortunately some line
532 * disciplines have an annoying habit of calling tty->write from
533 * the write wakeup callback (e.g. n_hdlc.c).
534 */
535void usb_serial_port_softint(struct usb_serial_port *port)
536{
537 schedule_work(&port->work);
538}
539EXPORT_SYMBOL_GPL(usb_serial_port_softint);
540
541static void usb_serial_port_work(struct work_struct *work)
542{
543 struct usb_serial_port *port =
544 container_of(work, struct usb_serial_port, work);
545
546 tty_port_tty_wakeup(&port->port);
547}
548
549static void usb_serial_port_poison_urbs(struct usb_serial_port *port)
550{
551 int i;
552
553 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
554 usb_poison_urb(port->read_urbs[i]);
555 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
556 usb_poison_urb(port->write_urbs[i]);
557
558 usb_poison_urb(port->interrupt_in_urb);
559 usb_poison_urb(port->interrupt_out_urb);
560}
561
562static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port)
563{
564 int i;
565
566 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
567 usb_unpoison_urb(port->read_urbs[i]);
568 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
569 usb_unpoison_urb(port->write_urbs[i]);
570
571 usb_unpoison_urb(port->interrupt_in_urb);
572 usb_unpoison_urb(port->interrupt_out_urb);
573}
574
575static void usb_serial_port_release(struct device *dev)
576{
577 struct usb_serial_port *port = to_usb_serial_port(dev);
578 int i;
579
580 dev_dbg(dev, "%s\n", __func__);
581
582 usb_free_urb(port->interrupt_in_urb);
583 usb_free_urb(port->interrupt_out_urb);
584 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
585 usb_free_urb(port->read_urbs[i]);
586 kfree(port->bulk_in_buffers[i]);
587 }
588 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
589 usb_free_urb(port->write_urbs[i]);
590 kfree(port->bulk_out_buffers[i]);
591 }
592 kfifo_free(&port->write_fifo);
593 kfree(port->interrupt_in_buffer);
594 kfree(port->interrupt_out_buffer);
595 tty_port_destroy(&port->port);
596 kfree(port);
597}
598
599static struct usb_serial *create_serial(struct usb_device *dev,
600 struct usb_interface *interface,
601 struct usb_serial_driver *driver)
602{
603 struct usb_serial *serial;
604
605 serial = kzalloc(sizeof(*serial), GFP_KERNEL);
606 if (!serial)
607 return NULL;
608 serial->dev = usb_get_dev(dev);
609 serial->type = driver;
610 serial->interface = usb_get_intf(interface);
611 kref_init(&serial->kref);
612 mutex_init(&serial->disc_mutex);
613 serial->minors_reserved = 0;
614
615 return serial;
616}
617
618static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
619 struct usb_serial_driver *drv)
620{
621 struct usb_dynid *dynid;
622
623 spin_lock(&drv->dynids.lock);
624 list_for_each_entry(dynid, &drv->dynids.list, node) {
625 if (usb_match_one_id(intf, &dynid->id)) {
626 spin_unlock(&drv->dynids.lock);
627 return &dynid->id;
628 }
629 }
630 spin_unlock(&drv->dynids.lock);
631 return NULL;
632}
633
634static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
635 struct usb_interface *intf)
636{
637 const struct usb_device_id *id;
638
639 id = usb_match_id(intf, drv->id_table);
640 if (id) {
641 dev_dbg(&intf->dev, "static descriptor matches\n");
642 goto exit;
643 }
644 id = match_dynamic_id(intf, drv);
645 if (id)
646 dev_dbg(&intf->dev, "dynamic descriptor matches\n");
647exit:
648 return id;
649}
650
651/* Caller must hold table_lock */
652static struct usb_serial_driver *search_serial_device(
653 struct usb_interface *iface)
654{
655 const struct usb_device_id *id = NULL;
656 struct usb_serial_driver *drv;
657 struct usb_driver *driver = to_usb_driver(iface->dev.driver);
658
659 /* Check if the usb id matches a known device */
660 list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
661 if (drv->usb_driver == driver)
662 id = get_iface_id(drv, iface);
663 if (id)
664 return drv;
665 }
666
667 return NULL;
668}
669
670static int serial_port_carrier_raised(struct tty_port *port)
671{
672 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
673 struct usb_serial_driver *drv = p->serial->type;
674
675 if (drv->carrier_raised)
676 return drv->carrier_raised(p);
677 /* No carrier control - don't block */
678 return 1;
679}
680
681static void serial_port_dtr_rts(struct tty_port *port, int on)
682{
683 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
684 struct usb_serial_driver *drv = p->serial->type;
685
686 if (drv->dtr_rts)
687 drv->dtr_rts(p, on);
688}
689
690static ssize_t port_number_show(struct device *dev,
691 struct device_attribute *attr, char *buf)
692{
693 struct usb_serial_port *port = to_usb_serial_port(dev);
694
695 return sprintf(buf, "%u\n", port->port_number);
696}
697static DEVICE_ATTR_RO(port_number);
698
699static struct attribute *usb_serial_port_attrs[] = {
700 &dev_attr_port_number.attr,
701 NULL
702};
703ATTRIBUTE_GROUPS(usb_serial_port);
704
705static const struct tty_port_operations serial_port_ops = {
706 .carrier_raised = serial_port_carrier_raised,
707 .dtr_rts = serial_port_dtr_rts,
708 .activate = serial_port_activate,
709 .shutdown = serial_port_shutdown,
710};
711
712static int usb_serial_probe(struct usb_interface *interface,
713 const struct usb_device_id *id)
714{
715 struct device *ddev = &interface->dev;
716 struct usb_device *dev = interface_to_usbdev(interface);
717 struct usb_serial *serial = NULL;
718 struct usb_serial_port *port;
719 struct usb_host_interface *iface_desc;
720 struct usb_endpoint_descriptor *endpoint;
721 struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
722 struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
723 struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
724 struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
725 struct usb_serial_driver *type = NULL;
726 int retval;
727 int buffer_size;
728 int i;
729 int j;
730 int num_interrupt_in = 0;
731 int num_interrupt_out = 0;
732 int num_bulk_in = 0;
733 int num_bulk_out = 0;
734 int num_ports = 0;
735 int max_endpoints;
736
737 mutex_lock(&table_lock);
738 type = search_serial_device(interface);
739 if (!type) {
740 mutex_unlock(&table_lock);
741 dev_dbg(ddev, "none matched\n");
742 return -ENODEV;
743 }
744
745 if (!try_module_get(type->driver.owner)) {
746 mutex_unlock(&table_lock);
747 dev_err(ddev, "module get failed, exiting\n");
748 return -EIO;
749 }
750 mutex_unlock(&table_lock);
751
752 serial = create_serial(dev, interface, type);
753 if (!serial) {
754 module_put(type->driver.owner);
755 return -ENOMEM;
756 }
757
758 /* if this device type has a probe function, call it */
759 if (type->probe) {
760 const struct usb_device_id *id;
761
762 id = get_iface_id(type, interface);
763 retval = type->probe(serial, id);
764
765 if (retval) {
766 dev_dbg(ddev, "sub driver rejected device\n");
767 usb_serial_put(serial);
768 module_put(type->driver.owner);
769 return retval;
770 }
771 }
772
773 /* descriptor matches, let's find the endpoints needed */
774 /* check out the endpoints */
775 iface_desc = interface->cur_altsetting;
776 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
777 endpoint = &iface_desc->endpoint[i].desc;
778
779 if (usb_endpoint_is_bulk_in(endpoint)) {
780 /* we found a bulk in endpoint */
781 dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
782 if (num_bulk_in < MAX_NUM_PORTS) {
783 bulk_in_endpoint[num_bulk_in] = endpoint;
784 ++num_bulk_in;
785 }
786 }
787
788 if (usb_endpoint_is_bulk_out(endpoint)) {
789 /* we found a bulk out endpoint */
790 dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
791 if (num_bulk_out < MAX_NUM_PORTS) {
792 bulk_out_endpoint[num_bulk_out] = endpoint;
793 ++num_bulk_out;
794 }
795 }
796
797 if (usb_endpoint_is_int_in(endpoint)) {
798 /* we found a interrupt in endpoint */
799 dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
800 if (num_interrupt_in < MAX_NUM_PORTS) {
801 interrupt_in_endpoint[num_interrupt_in] =
802 endpoint;
803 ++num_interrupt_in;
804 }
805 }
806
807 if (usb_endpoint_is_int_out(endpoint)) {
808 /* we found an interrupt out endpoint */
809 dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
810 if (num_interrupt_out < MAX_NUM_PORTS) {
811 interrupt_out_endpoint[num_interrupt_out] =
812 endpoint;
813 ++num_interrupt_out;
814 }
815 }
816 }
817
818#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
819 /* BEGIN HORRIBLE HACK FOR PL2303 */
820 /* this is needed due to the looney way its endpoints are set up */
821 if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
822 (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
823 ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
824 (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
825 ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
826 (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
827 ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
828 (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
829 if (interface != dev->actconfig->interface[0]) {
830 /* check out the endpoints of the other interface*/
831 iface_desc = dev->actconfig->interface[0]->cur_altsetting;
832 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
833 endpoint = &iface_desc->endpoint[i].desc;
834 if (usb_endpoint_is_int_in(endpoint)) {
835 /* we found a interrupt in endpoint */
836 dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
837 if (num_interrupt_in < MAX_NUM_PORTS) {
838 interrupt_in_endpoint[num_interrupt_in] = endpoint;
839 ++num_interrupt_in;
840 }
841 }
842 }
843 }
844
845 /* Now make sure the PL-2303 is configured correctly.
846 * If not, give up now and hope this hack will work
847 * properly during a later invocation of usb_serial_probe
848 */
849 if (num_bulk_in == 0 || num_bulk_out == 0) {
850 dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n");
851 usb_serial_put(serial);
852 module_put(type->driver.owner);
853 return -ENODEV;
854 }
855 }
856 /* END HORRIBLE HACK FOR PL2303 */
857#endif
858
859#ifdef CONFIG_USB_SERIAL_GENERIC
860 if (type == &usb_serial_generic_device) {
861 num_ports = num_bulk_out;
862 if (num_ports == 0) {
863 dev_err(ddev, "Generic device with no bulk out, not allowed.\n");
864 usb_serial_put(serial);
865 module_put(type->driver.owner);
866 return -EIO;
867 }
868 dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
869 dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n");
870 }
871#endif
872 if (!num_ports) {
873 /* if this device type has a calc_num_ports function, call it */
874 if (type->calc_num_ports)
875 num_ports = type->calc_num_ports(serial);
876 if (!num_ports)
877 num_ports = type->num_ports;
878 }
879
880 if (num_ports > MAX_NUM_PORTS) {
881 dev_warn(ddev, "too many ports requested: %d\n", num_ports);
882 num_ports = MAX_NUM_PORTS;
883 }
884
885 serial->num_ports = num_ports;
886 serial->num_bulk_in = num_bulk_in;
887 serial->num_bulk_out = num_bulk_out;
888 serial->num_interrupt_in = num_interrupt_in;
889 serial->num_interrupt_out = num_interrupt_out;
890
891 /* found all that we need */
892 dev_info(ddev, "%s converter detected\n", type->description);
893
894 /* create our ports, we need as many as the max endpoints */
895 /* we don't use num_ports here because some devices have more
896 endpoint pairs than ports */
897 max_endpoints = max(num_bulk_in, num_bulk_out);
898 max_endpoints = max(max_endpoints, num_interrupt_in);
899 max_endpoints = max(max_endpoints, num_interrupt_out);
900 max_endpoints = max(max_endpoints, (int)serial->num_ports);
901 serial->num_port_pointers = max_endpoints;
902
903 dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
904 for (i = 0; i < max_endpoints; ++i) {
905 port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
906 if (!port)
907 goto probe_error;
908 tty_port_init(&port->port);
909 port->port.ops = &serial_port_ops;
910 port->serial = serial;
911 spin_lock_init(&port->lock);
912 /* Keep this for private driver use for the moment but
913 should probably go away */
914 INIT_WORK(&port->work, usb_serial_port_work);
915 serial->port[i] = port;
916 port->dev.parent = &interface->dev;
917 port->dev.driver = NULL;
918 port->dev.bus = &usb_serial_bus_type;
919 port->dev.release = &usb_serial_port_release;
920 port->dev.groups = usb_serial_port_groups;
921 device_initialize(&port->dev);
922 }
923
924 /* set up the endpoint information */
925 for (i = 0; i < num_bulk_in; ++i) {
926 endpoint = bulk_in_endpoint[i];
927 port = serial->port[i];
928 buffer_size = max_t(int, serial->type->bulk_in_size,
929 usb_endpoint_maxp(endpoint));
930 port->bulk_in_size = buffer_size;
931 port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
932
933 for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) {
934 set_bit(j, &port->read_urbs_free);
935 port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
936 if (!port->read_urbs[j])
937 goto probe_error;
938 port->bulk_in_buffers[j] = kmalloc(buffer_size,
939 GFP_KERNEL);
940 if (!port->bulk_in_buffers[j])
941 goto probe_error;
942 usb_fill_bulk_urb(port->read_urbs[j], dev,
943 usb_rcvbulkpipe(dev,
944 endpoint->bEndpointAddress),
945 port->bulk_in_buffers[j], buffer_size,
946 serial->type->read_bulk_callback,
947 port);
948 }
949
950 port->read_urb = port->read_urbs[0];
951 port->bulk_in_buffer = port->bulk_in_buffers[0];
952 }
953
954 for (i = 0; i < num_bulk_out; ++i) {
955 endpoint = bulk_out_endpoint[i];
956 port = serial->port[i];
957 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
958 goto probe_error;
959 buffer_size = serial->type->bulk_out_size;
960 if (!buffer_size)
961 buffer_size = usb_endpoint_maxp(endpoint);
962 port->bulk_out_size = buffer_size;
963 port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
964
965 for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
966 set_bit(j, &port->write_urbs_free);
967 port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
968 if (!port->write_urbs[j])
969 goto probe_error;
970 port->bulk_out_buffers[j] = kmalloc(buffer_size,
971 GFP_KERNEL);
972 if (!port->bulk_out_buffers[j])
973 goto probe_error;
974 usb_fill_bulk_urb(port->write_urbs[j], dev,
975 usb_sndbulkpipe(dev,
976 endpoint->bEndpointAddress),
977 port->bulk_out_buffers[j], buffer_size,
978 serial->type->write_bulk_callback,
979 port);
980 }
981
982 port->write_urb = port->write_urbs[0];
983 port->bulk_out_buffer = port->bulk_out_buffers[0];
984 }
985
986 if (serial->type->read_int_callback) {
987 for (i = 0; i < num_interrupt_in; ++i) {
988 endpoint = interrupt_in_endpoint[i];
989 port = serial->port[i];
990 port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
991 if (!port->interrupt_in_urb)
992 goto probe_error;
993 buffer_size = usb_endpoint_maxp(endpoint);
994 port->interrupt_in_endpointAddress =
995 endpoint->bEndpointAddress;
996 port->interrupt_in_buffer = kmalloc(buffer_size,
997 GFP_KERNEL);
998 if (!port->interrupt_in_buffer)
999 goto probe_error;
1000 usb_fill_int_urb(port->interrupt_in_urb, dev,
1001 usb_rcvintpipe(dev,
1002 endpoint->bEndpointAddress),
1003 port->interrupt_in_buffer, buffer_size,
1004 serial->type->read_int_callback, port,
1005 endpoint->bInterval);
1006 }
1007 } else if (num_interrupt_in) {
1008 dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
1009 }
1010
1011 if (serial->type->write_int_callback) {
1012 for (i = 0; i < num_interrupt_out; ++i) {
1013 endpoint = interrupt_out_endpoint[i];
1014 port = serial->port[i];
1015 port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
1016 if (!port->interrupt_out_urb)
1017 goto probe_error;
1018 buffer_size = usb_endpoint_maxp(endpoint);
1019 port->interrupt_out_size = buffer_size;
1020 port->interrupt_out_endpointAddress =
1021 endpoint->bEndpointAddress;
1022 port->interrupt_out_buffer = kmalloc(buffer_size,
1023 GFP_KERNEL);
1024 if (!port->interrupt_out_buffer)
1025 goto probe_error;
1026 usb_fill_int_urb(port->interrupt_out_urb, dev,
1027 usb_sndintpipe(dev,
1028 endpoint->bEndpointAddress),
1029 port->interrupt_out_buffer, buffer_size,
1030 serial->type->write_int_callback, port,
1031 endpoint->bInterval);
1032 }
1033 } else if (num_interrupt_out) {
1034 dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
1035 }
1036
1037 usb_set_intfdata(interface, serial);
1038
1039 /* if this device type has an attach function, call it */
1040 if (type->attach) {
1041 retval = type->attach(serial);
1042 if (retval < 0)
1043 goto probe_error;
1044 serial->attached = 1;
1045 if (retval > 0) {
1046 /* quietly accept this device, but don't bind to a
1047 serial port as it's about to disappear */
1048 serial->num_ports = 0;
1049 goto exit;
1050 }
1051 } else {
1052 serial->attached = 1;
1053 }
1054
1055 /* Avoid race with tty_open and serial_install by setting the
1056 * disconnected flag and not clearing it until all ports have been
1057 * registered.
1058 */
1059 serial->disconnected = 1;
1060
1061 if (allocate_minors(serial, num_ports)) {
1062 dev_err(ddev, "No more free serial minor numbers\n");
1063 goto probe_error;
1064 }
1065
1066 /* register all of the individual ports with the driver core */
1067 for (i = 0; i < num_ports; ++i) {
1068 port = serial->port[i];
1069 dev_set_name(&port->dev, "ttyUSB%d", port->minor);
1070 dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
1071 device_enable_async_suspend(&port->dev);
1072
1073 retval = device_add(&port->dev);
1074 if (retval)
1075 dev_err(ddev, "Error registering port device, continuing\n");
1076 }
1077
1078 serial->disconnected = 0;
1079
1080 usb_serial_console_init(serial->port[0]->minor);
1081exit:
1082 module_put(type->driver.owner);
1083 return 0;
1084
1085probe_error:
1086 usb_serial_put(serial);
1087 module_put(type->driver.owner);
1088 return -EIO;
1089}
1090
1091static void usb_serial_disconnect(struct usb_interface *interface)
1092{
1093 int i;
1094 struct usb_serial *serial = usb_get_intfdata(interface);
1095 struct device *dev = &interface->dev;
1096 struct usb_serial_port *port;
1097 struct tty_struct *tty;
1098
1099 usb_serial_console_disconnect(serial);
1100
1101 mutex_lock(&serial->disc_mutex);
1102 /* must set a flag, to signal subdrivers */
1103 serial->disconnected = 1;
1104 mutex_unlock(&serial->disc_mutex);
1105
1106 for (i = 0; i < serial->num_ports; ++i) {
1107 port = serial->port[i];
1108 tty = tty_port_tty_get(&port->port);
1109 if (tty) {
1110 tty_vhangup(tty);
1111 tty_kref_put(tty);
1112 }
1113 usb_serial_port_poison_urbs(port);
1114 wake_up_interruptible(&port->port.delta_msr_wait);
1115 cancel_work_sync(&port->work);
1116 if (device_is_registered(&port->dev))
1117 device_del(&port->dev);
1118 }
1119 if (serial->type->disconnect)
1120 serial->type->disconnect(serial);
1121
1122 /* let the last holder of this object cause it to be cleaned up */
1123 usb_serial_put(serial);
1124 dev_info(dev, "device disconnected\n");
1125}
1126
1127int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
1128{
1129 struct usb_serial *serial = usb_get_intfdata(intf);
1130 int i, r = 0;
1131
1132 serial->suspending = 1;
1133
1134 /*
1135 * serial->type->suspend() MUST return 0 in system sleep context,
1136 * otherwise, the resume callback has to recover device from
1137 * previous suspend failure.
1138 */
1139 if (serial->type->suspend) {
1140 r = serial->type->suspend(serial, message);
1141 if (r < 0) {
1142 serial->suspending = 0;
1143 goto err_out;
1144 }
1145 }
1146
1147 for (i = 0; i < serial->num_ports; ++i)
1148 usb_serial_port_poison_urbs(serial->port[i]);
1149err_out:
1150 return r;
1151}
1152EXPORT_SYMBOL(usb_serial_suspend);
1153
1154static void usb_serial_unpoison_port_urbs(struct usb_serial *serial)
1155{
1156 int i;
1157
1158 for (i = 0; i < serial->num_ports; ++i)
1159 usb_serial_port_unpoison_urbs(serial->port[i]);
1160}
1161
1162int usb_serial_resume(struct usb_interface *intf)
1163{
1164 struct usb_serial *serial = usb_get_intfdata(intf);
1165 int rv;
1166
1167 usb_serial_unpoison_port_urbs(serial);
1168
1169 serial->suspending = 0;
1170 if (serial->type->resume)
1171 rv = serial->type->resume(serial);
1172 else
1173 rv = usb_serial_generic_resume(serial);
1174
1175 return rv;
1176}
1177EXPORT_SYMBOL(usb_serial_resume);
1178
1179static int usb_serial_reset_resume(struct usb_interface *intf)
1180{
1181 struct usb_serial *serial = usb_get_intfdata(intf);
1182 int rv;
1183
1184 usb_serial_unpoison_port_urbs(serial);
1185
1186 serial->suspending = 0;
1187 if (serial->type->reset_resume) {
1188 rv = serial->type->reset_resume(serial);
1189 } else {
1190 rv = -EOPNOTSUPP;
1191 intf->needs_binding = 1;
1192 }
1193
1194 return rv;
1195}
1196
1197static const struct tty_operations serial_ops = {
1198 .open = serial_open,
1199 .close = serial_close,
1200 .write = serial_write,
1201 .hangup = serial_hangup,
1202 .write_room = serial_write_room,
1203 .ioctl = serial_ioctl,
1204 .set_termios = serial_set_termios,
1205 .throttle = serial_throttle,
1206 .unthrottle = serial_unthrottle,
1207 .break_ctl = serial_break,
1208 .chars_in_buffer = serial_chars_in_buffer,
1209 .wait_until_sent = serial_wait_until_sent,
1210 .tiocmget = serial_tiocmget,
1211 .tiocmset = serial_tiocmset,
1212 .get_icount = serial_get_icount,
1213 .cleanup = serial_cleanup,
1214 .install = serial_install,
1215 .proc_fops = &serial_proc_fops,
1216};
1217
1218
1219struct tty_driver *usb_serial_tty_driver;
1220
1221/* Driver structure we register with the USB core */
1222static struct usb_driver usb_serial_driver = {
1223 .name = "usbserial",
1224 .probe = usb_serial_probe,
1225 .disconnect = usb_serial_disconnect,
1226 .suspend = usb_serial_suspend,
1227 .resume = usb_serial_resume,
1228 .no_dynamic_id = 1,
1229 .supports_autosuspend = 1,
1230};
1231
1232static int __init usb_serial_init(void)
1233{
1234 int result;
1235
1236 usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS);
1237 if (!usb_serial_tty_driver)
1238 return -ENOMEM;
1239
1240 /* Initialize our global data */
1241 result = bus_register(&usb_serial_bus_type);
1242 if (result) {
1243 pr_err("%s - registering bus driver failed\n", __func__);
1244 goto exit_bus;
1245 }
1246
1247 usb_serial_tty_driver->driver_name = "usbserial";
1248 usb_serial_tty_driver->name = "ttyUSB";
1249 usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR;
1250 usb_serial_tty_driver->minor_start = 0;
1251 usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1252 usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1253 usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
1254 TTY_DRIVER_DYNAMIC_DEV;
1255 usb_serial_tty_driver->init_termios = tty_std_termios;
1256 usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
1257 | HUPCL | CLOCAL;
1258 usb_serial_tty_driver->init_termios.c_ispeed = 9600;
1259 usb_serial_tty_driver->init_termios.c_ospeed = 9600;
1260 tty_set_operations(usb_serial_tty_driver, &serial_ops);
1261 result = tty_register_driver(usb_serial_tty_driver);
1262 if (result) {
1263 pr_err("%s - tty_register_driver failed\n", __func__);
1264 goto exit_reg_driver;
1265 }
1266
1267 /* register the USB driver */
1268 result = usb_register(&usb_serial_driver);
1269 if (result < 0) {
1270 pr_err("%s - usb_register failed\n", __func__);
1271 goto exit_tty;
1272 }
1273
1274 /* register the generic driver, if we should */
1275 result = usb_serial_generic_register();
1276 if (result < 0) {
1277 pr_err("%s - registering generic driver failed\n", __func__);
1278 goto exit_generic;
1279 }
1280
1281 return result;
1282
1283exit_generic:
1284 usb_deregister(&usb_serial_driver);
1285
1286exit_tty:
1287 tty_unregister_driver(usb_serial_tty_driver);
1288
1289exit_reg_driver:
1290 bus_unregister(&usb_serial_bus_type);
1291
1292exit_bus:
1293 pr_err("%s - returning with error %d\n", __func__, result);
1294 put_tty_driver(usb_serial_tty_driver);
1295 return result;
1296}
1297
1298
1299static void __exit usb_serial_exit(void)
1300{
1301 usb_serial_console_exit();
1302
1303 usb_serial_generic_deregister();
1304
1305 usb_deregister(&usb_serial_driver);
1306 tty_unregister_driver(usb_serial_tty_driver);
1307 put_tty_driver(usb_serial_tty_driver);
1308 bus_unregister(&usb_serial_bus_type);
1309 idr_destroy(&serial_minors);
1310}
1311
1312
1313module_init(usb_serial_init);
1314module_exit(usb_serial_exit);
1315
1316#define set_to_generic_if_null(type, function) \
1317 do { \
1318 if (!type->function) { \
1319 type->function = usb_serial_generic_##function; \
1320 pr_debug("%s: using generic " #function "\n", \
1321 type->driver.name); \
1322 } \
1323 } while (0)
1324
1325static void usb_serial_operations_init(struct usb_serial_driver *device)
1326{
1327 set_to_generic_if_null(device, open);
1328 set_to_generic_if_null(device, write);
1329 set_to_generic_if_null(device, close);
1330 set_to_generic_if_null(device, write_room);
1331 set_to_generic_if_null(device, chars_in_buffer);
1332 if (device->tx_empty)
1333 set_to_generic_if_null(device, wait_until_sent);
1334 set_to_generic_if_null(device, read_bulk_callback);
1335 set_to_generic_if_null(device, write_bulk_callback);
1336 set_to_generic_if_null(device, process_read_urb);
1337 set_to_generic_if_null(device, prepare_write_buffer);
1338}
1339
1340static int usb_serial_register(struct usb_serial_driver *driver)
1341{
1342 int retval;
1343
1344 if (usb_disabled())
1345 return -ENODEV;
1346
1347 if (!driver->description)
1348 driver->description = driver->driver.name;
1349 if (!driver->usb_driver) {
1350 WARN(1, "Serial driver %s has no usb_driver\n",
1351 driver->description);
1352 return -EINVAL;
1353 }
1354
1355 usb_serial_operations_init(driver);
1356
1357 /* Add this device to our list of devices */
1358 mutex_lock(&table_lock);
1359 list_add(&driver->driver_list, &usb_serial_driver_list);
1360
1361 retval = usb_serial_bus_register(driver);
1362 if (retval) {
1363 pr_err("problem %d when registering driver %s\n", retval, driver->description);
1364 list_del(&driver->driver_list);
1365 } else {
1366 pr_info("USB Serial support registered for %s\n", driver->description);
1367 }
1368 mutex_unlock(&table_lock);
1369 return retval;
1370}
1371
1372static void usb_serial_deregister(struct usb_serial_driver *device)
1373{
1374 pr_info("USB Serial deregistering driver %s\n", device->description);
1375
1376 mutex_lock(&table_lock);
1377 list_del(&device->driver_list);
1378 mutex_unlock(&table_lock);
1379
1380 usb_serial_bus_deregister(device);
1381}
1382
1383/**
1384 * usb_serial_register_drivers - register drivers for a usb-serial module
1385 * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
1386 * @name: name of the usb_driver for this set of @serial_drivers
1387 * @id_table: list of all devices this @serial_drivers set binds to
1388 *
1389 * Registers all the drivers in the @serial_drivers array, and dynamically
1390 * creates a struct usb_driver with the name @name and id_table of @id_table.
1391 */
1392int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
1393 const char *name,
1394 const struct usb_device_id *id_table)
1395{
1396 int rc;
1397 struct usb_driver *udriver;
1398 struct usb_serial_driver * const *sd;
1399
1400 /*
1401 * udriver must be registered before any of the serial drivers,
1402 * because the store_new_id() routine for the serial drivers (in
1403 * bus.c) probes udriver.
1404 *
1405 * Performance hack: We don't want udriver to be probed until
1406 * the serial drivers are registered, because the probe would
1407 * simply fail for lack of a matching serial driver.
1408 * So we leave udriver's id_table set to NULL until we are all set.
1409 *
1410 * Suspend/resume support is implemented in the usb-serial core,
1411 * so fill in the PM-related fields in udriver.
1412 */
1413 udriver = kzalloc(sizeof(*udriver), GFP_KERNEL);
1414 if (!udriver)
1415 return -ENOMEM;
1416
1417 udriver->name = name;
1418 udriver->no_dynamic_id = 1;
1419 udriver->supports_autosuspend = 1;
1420 udriver->suspend = usb_serial_suspend;
1421 udriver->resume = usb_serial_resume;
1422 udriver->probe = usb_serial_probe;
1423 udriver->disconnect = usb_serial_disconnect;
1424
1425 /* we only set the reset_resume field if the serial_driver has one */
1426 for (sd = serial_drivers; *sd; ++sd) {
1427 if ((*sd)->reset_resume) {
1428 udriver->reset_resume = usb_serial_reset_resume;
1429 break;
1430 }
1431 }
1432
1433 rc = usb_register(udriver);
1434 if (rc)
1435 return rc;
1436
1437 for (sd = serial_drivers; *sd; ++sd) {
1438 (*sd)->usb_driver = udriver;
1439 rc = usb_serial_register(*sd);
1440 if (rc)
1441 goto failed;
1442 }
1443
1444 /* Now set udriver's id_table and look for matches */
1445 udriver->id_table = id_table;
1446 rc = driver_attach(&udriver->drvwrap.driver);
1447 return 0;
1448
1449 failed:
1450 while (sd-- > serial_drivers)
1451 usb_serial_deregister(*sd);
1452 usb_deregister(udriver);
1453 return rc;
1454}
1455EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
1456
1457/**
1458 * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
1459 * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
1460 *
1461 * Deregisters all the drivers in the @serial_drivers array and deregisters and
1462 * frees the struct usb_driver that was created by the call to
1463 * usb_serial_register_drivers().
1464 */
1465void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[])
1466{
1467 struct usb_driver *udriver = (*serial_drivers)->usb_driver;
1468
1469 for (; *serial_drivers; ++serial_drivers)
1470 usb_serial_deregister(*serial_drivers);
1471 usb_deregister(udriver);
1472 kfree(udriver);
1473}
1474EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
1475
1476MODULE_AUTHOR(DRIVER_AUTHOR);
1477MODULE_DESCRIPTION(DRIVER_DESC);
1478MODULE_LICENSE("GPL");