Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2009 Texas Instruments.
4 * Copyright (C) 2010 EF Johnson Technologies
5 */
6
7#include <linux/interrupt.h>
8#include <linux/io.h>
9#include <linux/gpio/consumer.h>
10#include <linux/module.h>
11#include <linux/delay.h>
12#include <linux/platform_device.h>
13#include <linux/err.h>
14#include <linux/clk.h>
15#include <linux/dmaengine.h>
16#include <linux/dma-mapping.h>
17#include <linux/of.h>
18#include <linux/of_device.h>
19#include <linux/spi/spi.h>
20#include <linux/spi/spi_bitbang.h>
21#include <linux/slab.h>
22
23#include <linux/platform_data/spi-davinci.h>
24
25#define CS_DEFAULT 0xFF
26
27#define SPIFMT_PHASE_MASK BIT(16)
28#define SPIFMT_POLARITY_MASK BIT(17)
29#define SPIFMT_DISTIMER_MASK BIT(18)
30#define SPIFMT_SHIFTDIR_MASK BIT(20)
31#define SPIFMT_WAITENA_MASK BIT(21)
32#define SPIFMT_PARITYENA_MASK BIT(22)
33#define SPIFMT_ODD_PARITY_MASK BIT(23)
34#define SPIFMT_WDELAY_MASK 0x3f000000u
35#define SPIFMT_WDELAY_SHIFT 24
36#define SPIFMT_PRESCALE_SHIFT 8
37
38/* SPIPC0 */
39#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */
40#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */
41#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
42#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */
43
44#define SPIINT_MASKALL 0x0101035F
45#define SPIINT_MASKINT 0x0000015F
46#define SPI_INTLVL_1 0x000001FF
47#define SPI_INTLVL_0 0x00000000
48
49/* SPIDAT1 (upper 16 bit defines) */
50#define SPIDAT1_CSHOLD_MASK BIT(12)
51#define SPIDAT1_WDEL BIT(10)
52
53/* SPIGCR1 */
54#define SPIGCR1_CLKMOD_MASK BIT(1)
55#define SPIGCR1_MASTER_MASK BIT(0)
56#define SPIGCR1_POWERDOWN_MASK BIT(8)
57#define SPIGCR1_LOOPBACK_MASK BIT(16)
58#define SPIGCR1_SPIENA_MASK BIT(24)
59
60/* SPIBUF */
61#define SPIBUF_TXFULL_MASK BIT(29)
62#define SPIBUF_RXEMPTY_MASK BIT(31)
63
64/* SPIDELAY */
65#define SPIDELAY_C2TDELAY_SHIFT 24
66#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT)
67#define SPIDELAY_T2CDELAY_SHIFT 16
68#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT)
69#define SPIDELAY_T2EDELAY_SHIFT 8
70#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT)
71#define SPIDELAY_C2EDELAY_SHIFT 0
72#define SPIDELAY_C2EDELAY_MASK 0xFF
73
74/* Error Masks */
75#define SPIFLG_DLEN_ERR_MASK BIT(0)
76#define SPIFLG_TIMEOUT_MASK BIT(1)
77#define SPIFLG_PARERR_MASK BIT(2)
78#define SPIFLG_DESYNC_MASK BIT(3)
79#define SPIFLG_BITERR_MASK BIT(4)
80#define SPIFLG_OVRRUN_MASK BIT(6)
81#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24)
82#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \
83 | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
84 | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
85 | SPIFLG_OVRRUN_MASK)
86
87#define SPIINT_DMA_REQ_EN BIT(16)
88
89/* SPI Controller registers */
90#define SPIGCR0 0x00
91#define SPIGCR1 0x04
92#define SPIINT 0x08
93#define SPILVL 0x0c
94#define SPIFLG 0x10
95#define SPIPC0 0x14
96#define SPIDAT1 0x3c
97#define SPIBUF 0x40
98#define SPIDELAY 0x48
99#define SPIDEF 0x4c
100#define SPIFMT0 0x50
101
102#define DMA_MIN_BYTES 16
103
104/* SPI Controller driver's private data. */
105struct davinci_spi {
106 struct spi_bitbang bitbang;
107 struct clk *clk;
108
109 u8 version;
110 resource_size_t pbase;
111 void __iomem *base;
112 u32 irq;
113 struct completion done;
114
115 const void *tx;
116 void *rx;
117 int rcount;
118 int wcount;
119
120 struct dma_chan *dma_rx;
121 struct dma_chan *dma_tx;
122
123 struct davinci_spi_platform_data pdata;
124
125 void (*get_rx)(u32 rx_data, struct davinci_spi *);
126 u32 (*get_tx)(struct davinci_spi *);
127
128 u8 *bytes_per_word;
129
130 u8 prescaler_limit;
131};
132
133static struct davinci_spi_config davinci_spi_default_cfg;
134
135static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi)
136{
137 if (dspi->rx) {
138 u8 *rx = dspi->rx;
139 *rx++ = (u8)data;
140 dspi->rx = rx;
141 }
142}
143
144static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi)
145{
146 if (dspi->rx) {
147 u16 *rx = dspi->rx;
148 *rx++ = (u16)data;
149 dspi->rx = rx;
150 }
151}
152
153static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi)
154{
155 u32 data = 0;
156
157 if (dspi->tx) {
158 const u8 *tx = dspi->tx;
159
160 data = *tx++;
161 dspi->tx = tx;
162 }
163 return data;
164}
165
166static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi)
167{
168 u32 data = 0;
169
170 if (dspi->tx) {
171 const u16 *tx = dspi->tx;
172
173 data = *tx++;
174 dspi->tx = tx;
175 }
176 return data;
177}
178
179static inline void set_io_bits(void __iomem *addr, u32 bits)
180{
181 u32 v = ioread32(addr);
182
183 v |= bits;
184 iowrite32(v, addr);
185}
186
187static inline void clear_io_bits(void __iomem *addr, u32 bits)
188{
189 u32 v = ioread32(addr);
190
191 v &= ~bits;
192 iowrite32(v, addr);
193}
194
195/*
196 * Interface to control the chip select signal
197 */
198static void davinci_spi_chipselect(struct spi_device *spi, int value)
199{
200 struct davinci_spi *dspi;
201 struct davinci_spi_config *spicfg = spi->controller_data;
202 u8 chip_sel = spi->chip_select;
203 u16 spidat1 = CS_DEFAULT;
204
205 dspi = spi_master_get_devdata(spi->master);
206
207 /* program delay transfers if tx_delay is non zero */
208 if (spicfg && spicfg->wdelay)
209 spidat1 |= SPIDAT1_WDEL;
210
211 /*
212 * Board specific chip select logic decides the polarity and cs
213 * line for the controller
214 */
215 if (spi->cs_gpiod) {
216 /*
217 * FIXME: is this code ever executed? This host does not
218 * set SPI_MASTER_GPIO_SS so this chipselect callback should
219 * not get called from the SPI core when we are using
220 * GPIOs for chip select.
221 */
222 if (value == BITBANG_CS_ACTIVE)
223 gpiod_set_value(spi->cs_gpiod, 1);
224 else
225 gpiod_set_value(spi->cs_gpiod, 0);
226 } else {
227 if (value == BITBANG_CS_ACTIVE) {
228 if (!(spi->mode & SPI_CS_WORD))
229 spidat1 |= SPIDAT1_CSHOLD_MASK;
230 spidat1 &= ~(0x1 << chip_sel);
231 }
232 }
233
234 iowrite16(spidat1, dspi->base + SPIDAT1 + 2);
235}
236
237/**
238 * davinci_spi_get_prescale - Calculates the correct prescale value
239 * @dspi: the controller data
240 * @max_speed_hz: the maximum rate the SPI clock can run at
241 *
242 * This function calculates the prescale value that generates a clock rate
243 * less than or equal to the specified maximum.
244 *
245 * Returns: calculated prescale value for easy programming into SPI registers
246 * or negative error number if valid prescalar cannot be updated.
247 */
248static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
249 u32 max_speed_hz)
250{
251 int ret;
252
253 /* Subtract 1 to match what will be programmed into SPI register. */
254 ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz) - 1;
255
256 if (ret < dspi->prescaler_limit || ret > 255)
257 return -EINVAL;
258
259 return ret;
260}
261
262/**
263 * davinci_spi_setup_transfer - This functions will determine transfer method
264 * @spi: spi device on which data transfer to be done
265 * @t: spi transfer in which transfer info is filled
266 *
267 * This function determines data transfer method (8/16/32 bit transfer).
268 * It will also set the SPI Clock Control register according to
269 * SPI slave device freq.
270 */
271static int davinci_spi_setup_transfer(struct spi_device *spi,
272 struct spi_transfer *t)
273{
274
275 struct davinci_spi *dspi;
276 struct davinci_spi_config *spicfg;
277 u8 bits_per_word = 0;
278 u32 hz = 0, spifmt = 0;
279 int prescale;
280
281 dspi = spi_master_get_devdata(spi->master);
282 spicfg = spi->controller_data;
283 if (!spicfg)
284 spicfg = &davinci_spi_default_cfg;
285
286 if (t) {
287 bits_per_word = t->bits_per_word;
288 hz = t->speed_hz;
289 }
290
291 /* if bits_per_word is not set then set it default */
292 if (!bits_per_word)
293 bits_per_word = spi->bits_per_word;
294
295 /*
296 * Assign function pointer to appropriate transfer method
297 * 8bit, 16bit or 32bit transfer
298 */
299 if (bits_per_word <= 8) {
300 dspi->get_rx = davinci_spi_rx_buf_u8;
301 dspi->get_tx = davinci_spi_tx_buf_u8;
302 dspi->bytes_per_word[spi->chip_select] = 1;
303 } else {
304 dspi->get_rx = davinci_spi_rx_buf_u16;
305 dspi->get_tx = davinci_spi_tx_buf_u16;
306 dspi->bytes_per_word[spi->chip_select] = 2;
307 }
308
309 if (!hz)
310 hz = spi->max_speed_hz;
311
312 /* Set up SPIFMTn register, unique to this chipselect. */
313
314 prescale = davinci_spi_get_prescale(dspi, hz);
315 if (prescale < 0)
316 return prescale;
317
318 spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f);
319
320 if (spi->mode & SPI_LSB_FIRST)
321 spifmt |= SPIFMT_SHIFTDIR_MASK;
322
323 if (spi->mode & SPI_CPOL)
324 spifmt |= SPIFMT_POLARITY_MASK;
325
326 if (!(spi->mode & SPI_CPHA))
327 spifmt |= SPIFMT_PHASE_MASK;
328
329 /*
330 * Assume wdelay is used only on SPI peripherals that has this field
331 * in SPIFMTn register and when it's configured from board file or DT.
332 */
333 if (spicfg->wdelay)
334 spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT)
335 & SPIFMT_WDELAY_MASK);
336
337 /*
338 * Version 1 hardware supports two basic SPI modes:
339 * - Standard SPI mode uses 4 pins, with chipselect
340 * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
341 * (distinct from SPI_3WIRE, with just one data wire;
342 * or similar variants without MOSI or without MISO)
343 *
344 * Version 2 hardware supports an optional handshaking signal,
345 * so it can support two more modes:
346 * - 5 pin SPI variant is standard SPI plus SPI_READY
347 * - 4 pin with enable is (SPI_READY | SPI_NO_CS)
348 */
349
350 if (dspi->version == SPI_VERSION_2) {
351
352 u32 delay = 0;
353
354 if (spicfg->odd_parity)
355 spifmt |= SPIFMT_ODD_PARITY_MASK;
356
357 if (spicfg->parity_enable)
358 spifmt |= SPIFMT_PARITYENA_MASK;
359
360 if (spicfg->timer_disable) {
361 spifmt |= SPIFMT_DISTIMER_MASK;
362 } else {
363 delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT)
364 & SPIDELAY_C2TDELAY_MASK;
365 delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT)
366 & SPIDELAY_T2CDELAY_MASK;
367 }
368
369 if (spi->mode & SPI_READY) {
370 spifmt |= SPIFMT_WAITENA_MASK;
371 delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT)
372 & SPIDELAY_T2EDELAY_MASK;
373 delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT)
374 & SPIDELAY_C2EDELAY_MASK;
375 }
376
377 iowrite32(delay, dspi->base + SPIDELAY);
378 }
379
380 iowrite32(spifmt, dspi->base + SPIFMT0);
381
382 return 0;
383}
384
385static int davinci_spi_of_setup(struct spi_device *spi)
386{
387 struct davinci_spi_config *spicfg = spi->controller_data;
388 struct device_node *np = spi->dev.of_node;
389 struct davinci_spi *dspi = spi_master_get_devdata(spi->master);
390 u32 prop;
391
392 if (spicfg == NULL && np) {
393 spicfg = kzalloc(sizeof(*spicfg), GFP_KERNEL);
394 if (!spicfg)
395 return -ENOMEM;
396 *spicfg = davinci_spi_default_cfg;
397 /* override with dt configured values */
398 if (!of_property_read_u32(np, "ti,spi-wdelay", &prop))
399 spicfg->wdelay = (u8)prop;
400 spi->controller_data = spicfg;
401
402 if (dspi->dma_rx && dspi->dma_tx)
403 spicfg->io_type = SPI_IO_TYPE_DMA;
404 }
405
406 return 0;
407}
408
409/**
410 * davinci_spi_setup - This functions will set default transfer method
411 * @spi: spi device on which data transfer to be done
412 *
413 * This functions sets the default transfer method.
414 */
415static int davinci_spi_setup(struct spi_device *spi)
416{
417 struct davinci_spi *dspi;
418 struct device_node *np = spi->dev.of_node;
419 bool internal_cs = true;
420
421 dspi = spi_master_get_devdata(spi->master);
422
423 if (!(spi->mode & SPI_NO_CS)) {
424 if (np && spi->cs_gpiod)
425 internal_cs = false;
426
427 if (internal_cs)
428 set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
429 }
430
431 if (spi->mode & SPI_READY)
432 set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
433
434 if (spi->mode & SPI_LOOP)
435 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
436 else
437 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
438
439 return davinci_spi_of_setup(spi);
440}
441
442static void davinci_spi_cleanup(struct spi_device *spi)
443{
444 struct davinci_spi_config *spicfg = spi->controller_data;
445
446 spi->controller_data = NULL;
447 if (spi->dev.of_node)
448 kfree(spicfg);
449}
450
451static bool davinci_spi_can_dma(struct spi_master *master,
452 struct spi_device *spi,
453 struct spi_transfer *xfer)
454{
455 struct davinci_spi_config *spicfg = spi->controller_data;
456 bool can_dma = false;
457
458 if (spicfg)
459 can_dma = (spicfg->io_type == SPI_IO_TYPE_DMA) &&
460 (xfer->len >= DMA_MIN_BYTES) &&
461 !is_vmalloc_addr(xfer->rx_buf) &&
462 !is_vmalloc_addr(xfer->tx_buf);
463
464 return can_dma;
465}
466
467static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
468{
469 struct device *sdev = dspi->bitbang.master->dev.parent;
470
471 if (int_status & SPIFLG_TIMEOUT_MASK) {
472 dev_err(sdev, "SPI Time-out Error\n");
473 return -ETIMEDOUT;
474 }
475 if (int_status & SPIFLG_DESYNC_MASK) {
476 dev_err(sdev, "SPI Desynchronization Error\n");
477 return -EIO;
478 }
479 if (int_status & SPIFLG_BITERR_MASK) {
480 dev_err(sdev, "SPI Bit error\n");
481 return -EIO;
482 }
483
484 if (dspi->version == SPI_VERSION_2) {
485 if (int_status & SPIFLG_DLEN_ERR_MASK) {
486 dev_err(sdev, "SPI Data Length Error\n");
487 return -EIO;
488 }
489 if (int_status & SPIFLG_PARERR_MASK) {
490 dev_err(sdev, "SPI Parity Error\n");
491 return -EIO;
492 }
493 if (int_status & SPIFLG_OVRRUN_MASK) {
494 dev_err(sdev, "SPI Data Overrun error\n");
495 return -EIO;
496 }
497 if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
498 dev_err(sdev, "SPI Buffer Init Active\n");
499 return -EBUSY;
500 }
501 }
502
503 return 0;
504}
505
506/**
507 * davinci_spi_process_events - check for and handle any SPI controller events
508 * @dspi: the controller data
509 *
510 * This function will check the SPIFLG register and handle any events that are
511 * detected there
512 */
513static int davinci_spi_process_events(struct davinci_spi *dspi)
514{
515 u32 buf, status, errors = 0, spidat1;
516
517 buf = ioread32(dspi->base + SPIBUF);
518
519 if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) {
520 dspi->get_rx(buf & 0xFFFF, dspi);
521 dspi->rcount--;
522 }
523
524 status = ioread32(dspi->base + SPIFLG);
525
526 if (unlikely(status & SPIFLG_ERROR_MASK)) {
527 errors = status & SPIFLG_ERROR_MASK;
528 goto out;
529 }
530
531 if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) {
532 spidat1 = ioread32(dspi->base + SPIDAT1);
533 dspi->wcount--;
534 spidat1 &= ~0xFFFF;
535 spidat1 |= 0xFFFF & dspi->get_tx(dspi);
536 iowrite32(spidat1, dspi->base + SPIDAT1);
537 }
538
539out:
540 return errors;
541}
542
543static void davinci_spi_dma_rx_callback(void *data)
544{
545 struct davinci_spi *dspi = (struct davinci_spi *)data;
546
547 dspi->rcount = 0;
548
549 if (!dspi->wcount && !dspi->rcount)
550 complete(&dspi->done);
551}
552
553static void davinci_spi_dma_tx_callback(void *data)
554{
555 struct davinci_spi *dspi = (struct davinci_spi *)data;
556
557 dspi->wcount = 0;
558
559 if (!dspi->wcount && !dspi->rcount)
560 complete(&dspi->done);
561}
562
563/**
564 * davinci_spi_bufs - functions which will handle transfer data
565 * @spi: spi device on which data transfer to be done
566 * @t: spi transfer in which transfer info is filled
567 *
568 * This function will put data to be transferred into data register
569 * of SPI controller and then wait until the completion will be marked
570 * by the IRQ Handler.
571 */
572static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
573{
574 struct davinci_spi *dspi;
575 int data_type, ret = -ENOMEM;
576 u32 tx_data, spidat1;
577 u32 errors = 0;
578 struct davinci_spi_config *spicfg;
579 struct davinci_spi_platform_data *pdata;
580
581 dspi = spi_master_get_devdata(spi->master);
582 pdata = &dspi->pdata;
583 spicfg = (struct davinci_spi_config *)spi->controller_data;
584 if (!spicfg)
585 spicfg = &davinci_spi_default_cfg;
586
587 /* convert len to words based on bits_per_word */
588 data_type = dspi->bytes_per_word[spi->chip_select];
589
590 dspi->tx = t->tx_buf;
591 dspi->rx = t->rx_buf;
592 dspi->wcount = t->len / data_type;
593 dspi->rcount = dspi->wcount;
594
595 spidat1 = ioread32(dspi->base + SPIDAT1);
596
597 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
598 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
599
600 reinit_completion(&dspi->done);
601
602 if (!davinci_spi_can_dma(spi->master, spi, t)) {
603 if (spicfg->io_type != SPI_IO_TYPE_POLL)
604 set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
605 /* start the transfer */
606 dspi->wcount--;
607 tx_data = dspi->get_tx(dspi);
608 spidat1 &= 0xFFFF0000;
609 spidat1 |= tx_data & 0xFFFF;
610 iowrite32(spidat1, dspi->base + SPIDAT1);
611 } else {
612 struct dma_slave_config dma_rx_conf = {
613 .direction = DMA_DEV_TO_MEM,
614 .src_addr = (unsigned long)dspi->pbase + SPIBUF,
615 .src_addr_width = data_type,
616 .src_maxburst = 1,
617 };
618 struct dma_slave_config dma_tx_conf = {
619 .direction = DMA_MEM_TO_DEV,
620 .dst_addr = (unsigned long)dspi->pbase + SPIDAT1,
621 .dst_addr_width = data_type,
622 .dst_maxburst = 1,
623 };
624 struct dma_async_tx_descriptor *rxdesc;
625 struct dma_async_tx_descriptor *txdesc;
626
627 dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf);
628 dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf);
629
630 rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx,
631 t->rx_sg.sgl, t->rx_sg.nents, DMA_DEV_TO_MEM,
632 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
633 if (!rxdesc)
634 goto err_desc;
635
636 if (!t->tx_buf) {
637 /* To avoid errors when doing rx-only transfers with
638 * many SG entries (> 20), use the rx buffer as the
639 * dummy tx buffer so that dma reloads are done at the
640 * same time for rx and tx.
641 */
642 t->tx_sg.sgl = t->rx_sg.sgl;
643 t->tx_sg.nents = t->rx_sg.nents;
644 }
645
646 txdesc = dmaengine_prep_slave_sg(dspi->dma_tx,
647 t->tx_sg.sgl, t->tx_sg.nents, DMA_MEM_TO_DEV,
648 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
649 if (!txdesc)
650 goto err_desc;
651
652 rxdesc->callback = davinci_spi_dma_rx_callback;
653 rxdesc->callback_param = (void *)dspi;
654 txdesc->callback = davinci_spi_dma_tx_callback;
655 txdesc->callback_param = (void *)dspi;
656
657 if (pdata->cshold_bug)
658 iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2);
659
660 dmaengine_submit(rxdesc);
661 dmaengine_submit(txdesc);
662
663 dma_async_issue_pending(dspi->dma_rx);
664 dma_async_issue_pending(dspi->dma_tx);
665
666 set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
667 }
668
669 /* Wait for the transfer to complete */
670 if (spicfg->io_type != SPI_IO_TYPE_POLL) {
671 if (wait_for_completion_timeout(&dspi->done, HZ) == 0)
672 errors = SPIFLG_TIMEOUT_MASK;
673 } else {
674 while (dspi->rcount > 0 || dspi->wcount > 0) {
675 errors = davinci_spi_process_events(dspi);
676 if (errors)
677 break;
678 cpu_relax();
679 }
680 }
681
682 clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
683 if (davinci_spi_can_dma(spi->master, spi, t))
684 clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
685
686 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
687 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
688
689 /*
690 * Check for bit error, desync error,parity error,timeout error and
691 * receive overflow errors
692 */
693 if (errors) {
694 ret = davinci_spi_check_error(dspi, errors);
695 WARN(!ret, "%s: error reported but no error found!\n",
696 dev_name(&spi->dev));
697 return ret;
698 }
699
700 if (dspi->rcount != 0 || dspi->wcount != 0) {
701 dev_err(&spi->dev, "SPI data transfer error\n");
702 return -EIO;
703 }
704
705 return t->len;
706
707err_desc:
708 return ret;
709}
710
711/**
712 * dummy_thread_fn - dummy thread function
713 * @irq: IRQ number for this SPI Master
714 * @data: structure for SPI Master controller davinci_spi
715 *
716 * This is to satisfy the request_threaded_irq() API so that the irq
717 * handler is called in interrupt context.
718 */
719static irqreturn_t dummy_thread_fn(s32 irq, void *data)
720{
721 return IRQ_HANDLED;
722}
723
724/**
725 * davinci_spi_irq - Interrupt handler for SPI Master Controller
726 * @irq: IRQ number for this SPI Master
727 * @data: structure for SPI Master controller davinci_spi
728 *
729 * ISR will determine that interrupt arrives either for READ or WRITE command.
730 * According to command it will do the appropriate action. It will check
731 * transfer length and if it is not zero then dispatch transfer command again.
732 * If transfer length is zero then it will indicate the COMPLETION so that
733 * davinci_spi_bufs function can go ahead.
734 */
735static irqreturn_t davinci_spi_irq(s32 irq, void *data)
736{
737 struct davinci_spi *dspi = data;
738 int status;
739
740 status = davinci_spi_process_events(dspi);
741 if (unlikely(status != 0))
742 clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
743
744 if ((!dspi->rcount && !dspi->wcount) || status)
745 complete(&dspi->done);
746
747 return IRQ_HANDLED;
748}
749
750static int davinci_spi_request_dma(struct davinci_spi *dspi)
751{
752 struct device *sdev = dspi->bitbang.master->dev.parent;
753
754 dspi->dma_rx = dma_request_chan(sdev, "rx");
755 if (IS_ERR(dspi->dma_rx))
756 return PTR_ERR(dspi->dma_rx);
757
758 dspi->dma_tx = dma_request_chan(sdev, "tx");
759 if (IS_ERR(dspi->dma_tx)) {
760 dma_release_channel(dspi->dma_rx);
761 return PTR_ERR(dspi->dma_tx);
762 }
763
764 return 0;
765}
766
767#if defined(CONFIG_OF)
768
769/* OF SPI data structure */
770struct davinci_spi_of_data {
771 u8 version;
772 u8 prescaler_limit;
773};
774
775static const struct davinci_spi_of_data dm6441_spi_data = {
776 .version = SPI_VERSION_1,
777 .prescaler_limit = 2,
778};
779
780static const struct davinci_spi_of_data da830_spi_data = {
781 .version = SPI_VERSION_2,
782 .prescaler_limit = 2,
783};
784
785static const struct davinci_spi_of_data keystone_spi_data = {
786 .version = SPI_VERSION_1,
787 .prescaler_limit = 0,
788};
789
790static const struct of_device_id davinci_spi_of_match[] = {
791 {
792 .compatible = "ti,dm6441-spi",
793 .data = &dm6441_spi_data,
794 },
795 {
796 .compatible = "ti,da830-spi",
797 .data = &da830_spi_data,
798 },
799 {
800 .compatible = "ti,keystone-spi",
801 .data = &keystone_spi_data,
802 },
803 { },
804};
805MODULE_DEVICE_TABLE(of, davinci_spi_of_match);
806
807/**
808 * spi_davinci_get_pdata - Get platform data from DTS binding
809 * @pdev: ptr to platform data
810 * @dspi: ptr to driver data
811 *
812 * Parses and populates pdata in dspi from device tree bindings.
813 *
814 * NOTE: Not all platform data params are supported currently.
815 */
816static int spi_davinci_get_pdata(struct platform_device *pdev,
817 struct davinci_spi *dspi)
818{
819 struct device_node *node = pdev->dev.of_node;
820 struct davinci_spi_of_data *spi_data;
821 struct davinci_spi_platform_data *pdata;
822 unsigned int num_cs, intr_line = 0;
823 const struct of_device_id *match;
824
825 pdata = &dspi->pdata;
826
827 match = of_match_device(davinci_spi_of_match, &pdev->dev);
828 if (!match)
829 return -ENODEV;
830
831 spi_data = (struct davinci_spi_of_data *)match->data;
832
833 pdata->version = spi_data->version;
834 pdata->prescaler_limit = spi_data->prescaler_limit;
835 /*
836 * default num_cs is 1 and all chipsel are internal to the chip
837 * indicated by chip_sel being NULL or cs_gpios being NULL or
838 * set to -ENOENT. num-cs includes internal as well as gpios.
839 * indicated by chip_sel being NULL. GPIO based CS is not
840 * supported yet in DT bindings.
841 */
842 num_cs = 1;
843 of_property_read_u32(node, "num-cs", &num_cs);
844 pdata->num_chipselect = num_cs;
845 of_property_read_u32(node, "ti,davinci-spi-intr-line", &intr_line);
846 pdata->intr_line = intr_line;
847 return 0;
848}
849#else
850static int spi_davinci_get_pdata(struct platform_device *pdev,
851 struct davinci_spi *dspi)
852{
853 return -ENODEV;
854}
855#endif
856
857/**
858 * davinci_spi_probe - probe function for SPI Master Controller
859 * @pdev: platform_device structure which contains plateform specific data
860 *
861 * According to Linux Device Model this function will be invoked by Linux
862 * with platform_device struct which contains the device specific info.
863 * This function will map the SPI controller's memory, register IRQ,
864 * Reset SPI controller and setting its registers to default value.
865 * It will invoke spi_bitbang_start to create work queue so that client driver
866 * can register transfer method to work queue.
867 */
868static int davinci_spi_probe(struct platform_device *pdev)
869{
870 struct spi_master *master;
871 struct davinci_spi *dspi;
872 struct davinci_spi_platform_data *pdata;
873 struct resource *r;
874 int ret = 0;
875 u32 spipc0;
876
877 master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
878 if (master == NULL) {
879 ret = -ENOMEM;
880 goto err;
881 }
882
883 platform_set_drvdata(pdev, master);
884
885 dspi = spi_master_get_devdata(master);
886
887 if (dev_get_platdata(&pdev->dev)) {
888 pdata = dev_get_platdata(&pdev->dev);
889 dspi->pdata = *pdata;
890 } else {
891 /* update dspi pdata with that from the DT */
892 ret = spi_davinci_get_pdata(pdev, dspi);
893 if (ret < 0)
894 goto free_master;
895 }
896
897 /* pdata in dspi is now updated and point pdata to that */
898 pdata = &dspi->pdata;
899
900 dspi->bytes_per_word = devm_kcalloc(&pdev->dev,
901 pdata->num_chipselect,
902 sizeof(*dspi->bytes_per_word),
903 GFP_KERNEL);
904 if (dspi->bytes_per_word == NULL) {
905 ret = -ENOMEM;
906 goto free_master;
907 }
908
909 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
910 if (r == NULL) {
911 ret = -ENOENT;
912 goto free_master;
913 }
914
915 dspi->pbase = r->start;
916
917 dspi->base = devm_ioremap_resource(&pdev->dev, r);
918 if (IS_ERR(dspi->base)) {
919 ret = PTR_ERR(dspi->base);
920 goto free_master;
921 }
922
923 init_completion(&dspi->done);
924
925 ret = platform_get_irq(pdev, 0);
926 if (ret == 0)
927 ret = -EINVAL;
928 if (ret < 0)
929 goto free_master;
930 dspi->irq = ret;
931
932 ret = devm_request_threaded_irq(&pdev->dev, dspi->irq, davinci_spi_irq,
933 dummy_thread_fn, 0, dev_name(&pdev->dev), dspi);
934 if (ret)
935 goto free_master;
936
937 dspi->bitbang.master = master;
938
939 dspi->clk = devm_clk_get(&pdev->dev, NULL);
940 if (IS_ERR(dspi->clk)) {
941 ret = -ENODEV;
942 goto free_master;
943 }
944 ret = clk_prepare_enable(dspi->clk);
945 if (ret)
946 goto free_master;
947
948 master->use_gpio_descriptors = true;
949 master->dev.of_node = pdev->dev.of_node;
950 master->bus_num = pdev->id;
951 master->num_chipselect = pdata->num_chipselect;
952 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
953 master->flags = SPI_MASTER_MUST_RX;
954 master->setup = davinci_spi_setup;
955 master->cleanup = davinci_spi_cleanup;
956 master->can_dma = davinci_spi_can_dma;
957
958 dspi->bitbang.chipselect = davinci_spi_chipselect;
959 dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
960 dspi->prescaler_limit = pdata->prescaler_limit;
961 dspi->version = pdata->version;
962
963 dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_WORD;
964 if (dspi->version == SPI_VERSION_2)
965 dspi->bitbang.flags |= SPI_READY;
966
967 dspi->bitbang.txrx_bufs = davinci_spi_bufs;
968
969 ret = davinci_spi_request_dma(dspi);
970 if (ret == -EPROBE_DEFER) {
971 goto free_clk;
972 } else if (ret) {
973 dev_info(&pdev->dev, "DMA is not supported (%d)\n", ret);
974 dspi->dma_rx = NULL;
975 dspi->dma_tx = NULL;
976 }
977
978 dspi->get_rx = davinci_spi_rx_buf_u8;
979 dspi->get_tx = davinci_spi_tx_buf_u8;
980
981 /* Reset In/OUT SPI module */
982 iowrite32(0, dspi->base + SPIGCR0);
983 udelay(100);
984 iowrite32(1, dspi->base + SPIGCR0);
985
986 /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */
987 spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
988 iowrite32(spipc0, dspi->base + SPIPC0);
989
990 if (pdata->intr_line)
991 iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
992 else
993 iowrite32(SPI_INTLVL_0, dspi->base + SPILVL);
994
995 iowrite32(CS_DEFAULT, dspi->base + SPIDEF);
996
997 /* master mode default */
998 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK);
999 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
1000 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
1001
1002 ret = spi_bitbang_start(&dspi->bitbang);
1003 if (ret)
1004 goto free_dma;
1005
1006 dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base);
1007
1008 return ret;
1009
1010free_dma:
1011 if (dspi->dma_rx) {
1012 dma_release_channel(dspi->dma_rx);
1013 dma_release_channel(dspi->dma_tx);
1014 }
1015free_clk:
1016 clk_disable_unprepare(dspi->clk);
1017free_master:
1018 spi_master_put(master);
1019err:
1020 return ret;
1021}
1022
1023/**
1024 * davinci_spi_remove - remove function for SPI Master Controller
1025 * @pdev: platform_device structure which contains plateform specific data
1026 *
1027 * This function will do the reverse action of davinci_spi_probe function
1028 * It will free the IRQ and SPI controller's memory region.
1029 * It will also call spi_bitbang_stop to destroy the work queue which was
1030 * created by spi_bitbang_start.
1031 */
1032static int davinci_spi_remove(struct platform_device *pdev)
1033{
1034 struct davinci_spi *dspi;
1035 struct spi_master *master;
1036
1037 master = platform_get_drvdata(pdev);
1038 dspi = spi_master_get_devdata(master);
1039
1040 spi_bitbang_stop(&dspi->bitbang);
1041
1042 clk_disable_unprepare(dspi->clk);
1043 spi_master_put(master);
1044
1045 if (dspi->dma_rx) {
1046 dma_release_channel(dspi->dma_rx);
1047 dma_release_channel(dspi->dma_tx);
1048 }
1049
1050 return 0;
1051}
1052
1053static struct platform_driver davinci_spi_driver = {
1054 .driver = {
1055 .name = "spi_davinci",
1056 .of_match_table = of_match_ptr(davinci_spi_of_match),
1057 },
1058 .probe = davinci_spi_probe,
1059 .remove = davinci_spi_remove,
1060};
1061module_platform_driver(davinci_spi_driver);
1062
1063MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
1064MODULE_LICENSE("GPL");
1/*
2 * Copyright (C) 2009 Texas Instruments.
3 * Copyright (C) 2010 EF Johnson Technologies
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 */
19
20#include <linux/interrupt.h>
21#include <linux/io.h>
22#include <linux/gpio.h>
23#include <linux/module.h>
24#include <linux/delay.h>
25#include <linux/platform_device.h>
26#include <linux/err.h>
27#include <linux/clk.h>
28#include <linux/dmaengine.h>
29#include <linux/dma-mapping.h>
30#include <linux/edma.h>
31#include <linux/of.h>
32#include <linux/of_device.h>
33#include <linux/spi/spi.h>
34#include <linux/spi/spi_bitbang.h>
35#include <linux/slab.h>
36
37#include <linux/platform_data/spi-davinci.h>
38
39#define SPI_NO_RESOURCE ((resource_size_t)-1)
40
41#define SPI_MAX_CHIPSELECT 2
42
43#define CS_DEFAULT 0xFF
44
45#define SPIFMT_PHASE_MASK BIT(16)
46#define SPIFMT_POLARITY_MASK BIT(17)
47#define SPIFMT_DISTIMER_MASK BIT(18)
48#define SPIFMT_SHIFTDIR_MASK BIT(20)
49#define SPIFMT_WAITENA_MASK BIT(21)
50#define SPIFMT_PARITYENA_MASK BIT(22)
51#define SPIFMT_ODD_PARITY_MASK BIT(23)
52#define SPIFMT_WDELAY_MASK 0x3f000000u
53#define SPIFMT_WDELAY_SHIFT 24
54#define SPIFMT_PRESCALE_SHIFT 8
55
56/* SPIPC0 */
57#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */
58#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */
59#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
60#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */
61
62#define SPIINT_MASKALL 0x0101035F
63#define SPIINT_MASKINT 0x0000015F
64#define SPI_INTLVL_1 0x000001FF
65#define SPI_INTLVL_0 0x00000000
66
67/* SPIDAT1 (upper 16 bit defines) */
68#define SPIDAT1_CSHOLD_MASK BIT(12)
69
70/* SPIGCR1 */
71#define SPIGCR1_CLKMOD_MASK BIT(1)
72#define SPIGCR1_MASTER_MASK BIT(0)
73#define SPIGCR1_POWERDOWN_MASK BIT(8)
74#define SPIGCR1_LOOPBACK_MASK BIT(16)
75#define SPIGCR1_SPIENA_MASK BIT(24)
76
77/* SPIBUF */
78#define SPIBUF_TXFULL_MASK BIT(29)
79#define SPIBUF_RXEMPTY_MASK BIT(31)
80
81/* SPIDELAY */
82#define SPIDELAY_C2TDELAY_SHIFT 24
83#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT)
84#define SPIDELAY_T2CDELAY_SHIFT 16
85#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT)
86#define SPIDELAY_T2EDELAY_SHIFT 8
87#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT)
88#define SPIDELAY_C2EDELAY_SHIFT 0
89#define SPIDELAY_C2EDELAY_MASK 0xFF
90
91/* Error Masks */
92#define SPIFLG_DLEN_ERR_MASK BIT(0)
93#define SPIFLG_TIMEOUT_MASK BIT(1)
94#define SPIFLG_PARERR_MASK BIT(2)
95#define SPIFLG_DESYNC_MASK BIT(3)
96#define SPIFLG_BITERR_MASK BIT(4)
97#define SPIFLG_OVRRUN_MASK BIT(6)
98#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24)
99#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \
100 | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
101 | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
102 | SPIFLG_OVRRUN_MASK)
103
104#define SPIINT_DMA_REQ_EN BIT(16)
105
106/* SPI Controller registers */
107#define SPIGCR0 0x00
108#define SPIGCR1 0x04
109#define SPIINT 0x08
110#define SPILVL 0x0c
111#define SPIFLG 0x10
112#define SPIPC0 0x14
113#define SPIDAT1 0x3c
114#define SPIBUF 0x40
115#define SPIDELAY 0x48
116#define SPIDEF 0x4c
117#define SPIFMT0 0x50
118
119/* SPI Controller driver's private data. */
120struct davinci_spi {
121 struct spi_bitbang bitbang;
122 struct clk *clk;
123
124 u8 version;
125 resource_size_t pbase;
126 void __iomem *base;
127 u32 irq;
128 struct completion done;
129
130 const void *tx;
131 void *rx;
132 int rcount;
133 int wcount;
134
135 struct dma_chan *dma_rx;
136 struct dma_chan *dma_tx;
137 int dma_rx_chnum;
138 int dma_tx_chnum;
139
140 struct davinci_spi_platform_data pdata;
141
142 void (*get_rx)(u32 rx_data, struct davinci_spi *);
143 u32 (*get_tx)(struct davinci_spi *);
144
145 u8 bytes_per_word[SPI_MAX_CHIPSELECT];
146};
147
148static struct davinci_spi_config davinci_spi_default_cfg;
149
150static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi)
151{
152 if (dspi->rx) {
153 u8 *rx = dspi->rx;
154 *rx++ = (u8)data;
155 dspi->rx = rx;
156 }
157}
158
159static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi)
160{
161 if (dspi->rx) {
162 u16 *rx = dspi->rx;
163 *rx++ = (u16)data;
164 dspi->rx = rx;
165 }
166}
167
168static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi)
169{
170 u32 data = 0;
171 if (dspi->tx) {
172 const u8 *tx = dspi->tx;
173 data = *tx++;
174 dspi->tx = tx;
175 }
176 return data;
177}
178
179static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi)
180{
181 u32 data = 0;
182 if (dspi->tx) {
183 const u16 *tx = dspi->tx;
184 data = *tx++;
185 dspi->tx = tx;
186 }
187 return data;
188}
189
190static inline void set_io_bits(void __iomem *addr, u32 bits)
191{
192 u32 v = ioread32(addr);
193
194 v |= bits;
195 iowrite32(v, addr);
196}
197
198static inline void clear_io_bits(void __iomem *addr, u32 bits)
199{
200 u32 v = ioread32(addr);
201
202 v &= ~bits;
203 iowrite32(v, addr);
204}
205
206/*
207 * Interface to control the chip select signal
208 */
209static void davinci_spi_chipselect(struct spi_device *spi, int value)
210{
211 struct davinci_spi *dspi;
212 struct davinci_spi_platform_data *pdata;
213 u8 chip_sel = spi->chip_select;
214 u16 spidat1 = CS_DEFAULT;
215 bool gpio_chipsel = false;
216
217 dspi = spi_master_get_devdata(spi->master);
218 pdata = &dspi->pdata;
219
220 if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
221 pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
222 gpio_chipsel = true;
223
224 /*
225 * Board specific chip select logic decides the polarity and cs
226 * line for the controller
227 */
228 if (gpio_chipsel) {
229 if (value == BITBANG_CS_ACTIVE)
230 gpio_set_value(pdata->chip_sel[chip_sel], 0);
231 else
232 gpio_set_value(pdata->chip_sel[chip_sel], 1);
233 } else {
234 if (value == BITBANG_CS_ACTIVE) {
235 spidat1 |= SPIDAT1_CSHOLD_MASK;
236 spidat1 &= ~(0x1 << chip_sel);
237 }
238
239 iowrite16(spidat1, dspi->base + SPIDAT1 + 2);
240 }
241}
242
243/**
244 * davinci_spi_get_prescale - Calculates the correct prescale value
245 * @maxspeed_hz: the maximum rate the SPI clock can run at
246 *
247 * This function calculates the prescale value that generates a clock rate
248 * less than or equal to the specified maximum.
249 *
250 * Returns: calculated prescale - 1 for easy programming into SPI registers
251 * or negative error number if valid prescalar cannot be updated.
252 */
253static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
254 u32 max_speed_hz)
255{
256 int ret;
257
258 ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz);
259
260 if (ret < 3 || ret > 256)
261 return -EINVAL;
262
263 return ret - 1;
264}
265
266/**
267 * davinci_spi_setup_transfer - This functions will determine transfer method
268 * @spi: spi device on which data transfer to be done
269 * @t: spi transfer in which transfer info is filled
270 *
271 * This function determines data transfer method (8/16/32 bit transfer).
272 * It will also set the SPI Clock Control register according to
273 * SPI slave device freq.
274 */
275static int davinci_spi_setup_transfer(struct spi_device *spi,
276 struct spi_transfer *t)
277{
278
279 struct davinci_spi *dspi;
280 struct davinci_spi_config *spicfg;
281 u8 bits_per_word = 0;
282 u32 hz = 0, spifmt = 0;
283 int prescale;
284
285 dspi = spi_master_get_devdata(spi->master);
286 spicfg = (struct davinci_spi_config *)spi->controller_data;
287 if (!spicfg)
288 spicfg = &davinci_spi_default_cfg;
289
290 if (t) {
291 bits_per_word = t->bits_per_word;
292 hz = t->speed_hz;
293 }
294
295 /* if bits_per_word is not set then set it default */
296 if (!bits_per_word)
297 bits_per_word = spi->bits_per_word;
298
299 /*
300 * Assign function pointer to appropriate transfer method
301 * 8bit, 16bit or 32bit transfer
302 */
303 if (bits_per_word <= 8) {
304 dspi->get_rx = davinci_spi_rx_buf_u8;
305 dspi->get_tx = davinci_spi_tx_buf_u8;
306 dspi->bytes_per_word[spi->chip_select] = 1;
307 } else {
308 dspi->get_rx = davinci_spi_rx_buf_u16;
309 dspi->get_tx = davinci_spi_tx_buf_u16;
310 dspi->bytes_per_word[spi->chip_select] = 2;
311 }
312
313 if (!hz)
314 hz = spi->max_speed_hz;
315
316 /* Set up SPIFMTn register, unique to this chipselect. */
317
318 prescale = davinci_spi_get_prescale(dspi, hz);
319 if (prescale < 0)
320 return prescale;
321
322 spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f);
323
324 if (spi->mode & SPI_LSB_FIRST)
325 spifmt |= SPIFMT_SHIFTDIR_MASK;
326
327 if (spi->mode & SPI_CPOL)
328 spifmt |= SPIFMT_POLARITY_MASK;
329
330 if (!(spi->mode & SPI_CPHA))
331 spifmt |= SPIFMT_PHASE_MASK;
332
333 /*
334 * Version 1 hardware supports two basic SPI modes:
335 * - Standard SPI mode uses 4 pins, with chipselect
336 * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
337 * (distinct from SPI_3WIRE, with just one data wire;
338 * or similar variants without MOSI or without MISO)
339 *
340 * Version 2 hardware supports an optional handshaking signal,
341 * so it can support two more modes:
342 * - 5 pin SPI variant is standard SPI plus SPI_READY
343 * - 4 pin with enable is (SPI_READY | SPI_NO_CS)
344 */
345
346 if (dspi->version == SPI_VERSION_2) {
347
348 u32 delay = 0;
349
350 spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT)
351 & SPIFMT_WDELAY_MASK);
352
353 if (spicfg->odd_parity)
354 spifmt |= SPIFMT_ODD_PARITY_MASK;
355
356 if (spicfg->parity_enable)
357 spifmt |= SPIFMT_PARITYENA_MASK;
358
359 if (spicfg->timer_disable) {
360 spifmt |= SPIFMT_DISTIMER_MASK;
361 } else {
362 delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT)
363 & SPIDELAY_C2TDELAY_MASK;
364 delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT)
365 & SPIDELAY_T2CDELAY_MASK;
366 }
367
368 if (spi->mode & SPI_READY) {
369 spifmt |= SPIFMT_WAITENA_MASK;
370 delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT)
371 & SPIDELAY_T2EDELAY_MASK;
372 delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT)
373 & SPIDELAY_C2EDELAY_MASK;
374 }
375
376 iowrite32(delay, dspi->base + SPIDELAY);
377 }
378
379 iowrite32(spifmt, dspi->base + SPIFMT0);
380
381 return 0;
382}
383
384/**
385 * davinci_spi_setup - This functions will set default transfer method
386 * @spi: spi device on which data transfer to be done
387 *
388 * This functions sets the default transfer method.
389 */
390static int davinci_spi_setup(struct spi_device *spi)
391{
392 int retval = 0;
393 struct davinci_spi *dspi;
394 struct davinci_spi_platform_data *pdata;
395
396 dspi = spi_master_get_devdata(spi->master);
397 pdata = &dspi->pdata;
398
399 if (!(spi->mode & SPI_NO_CS)) {
400 if ((pdata->chip_sel == NULL) ||
401 (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
402 set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
403
404 }
405
406 if (spi->mode & SPI_READY)
407 set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
408
409 if (spi->mode & SPI_LOOP)
410 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
411 else
412 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
413
414 return retval;
415}
416
417static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
418{
419 struct device *sdev = dspi->bitbang.master->dev.parent;
420
421 if (int_status & SPIFLG_TIMEOUT_MASK) {
422 dev_dbg(sdev, "SPI Time-out Error\n");
423 return -ETIMEDOUT;
424 }
425 if (int_status & SPIFLG_DESYNC_MASK) {
426 dev_dbg(sdev, "SPI Desynchronization Error\n");
427 return -EIO;
428 }
429 if (int_status & SPIFLG_BITERR_MASK) {
430 dev_dbg(sdev, "SPI Bit error\n");
431 return -EIO;
432 }
433
434 if (dspi->version == SPI_VERSION_2) {
435 if (int_status & SPIFLG_DLEN_ERR_MASK) {
436 dev_dbg(sdev, "SPI Data Length Error\n");
437 return -EIO;
438 }
439 if (int_status & SPIFLG_PARERR_MASK) {
440 dev_dbg(sdev, "SPI Parity Error\n");
441 return -EIO;
442 }
443 if (int_status & SPIFLG_OVRRUN_MASK) {
444 dev_dbg(sdev, "SPI Data Overrun error\n");
445 return -EIO;
446 }
447 if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
448 dev_dbg(sdev, "SPI Buffer Init Active\n");
449 return -EBUSY;
450 }
451 }
452
453 return 0;
454}
455
456/**
457 * davinci_spi_process_events - check for and handle any SPI controller events
458 * @dspi: the controller data
459 *
460 * This function will check the SPIFLG register and handle any events that are
461 * detected there
462 */
463static int davinci_spi_process_events(struct davinci_spi *dspi)
464{
465 u32 buf, status, errors = 0, spidat1;
466
467 buf = ioread32(dspi->base + SPIBUF);
468
469 if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) {
470 dspi->get_rx(buf & 0xFFFF, dspi);
471 dspi->rcount--;
472 }
473
474 status = ioread32(dspi->base + SPIFLG);
475
476 if (unlikely(status & SPIFLG_ERROR_MASK)) {
477 errors = status & SPIFLG_ERROR_MASK;
478 goto out;
479 }
480
481 if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) {
482 spidat1 = ioread32(dspi->base + SPIDAT1);
483 dspi->wcount--;
484 spidat1 &= ~0xFFFF;
485 spidat1 |= 0xFFFF & dspi->get_tx(dspi);
486 iowrite32(spidat1, dspi->base + SPIDAT1);
487 }
488
489out:
490 return errors;
491}
492
493static void davinci_spi_dma_rx_callback(void *data)
494{
495 struct davinci_spi *dspi = (struct davinci_spi *)data;
496
497 dspi->rcount = 0;
498
499 if (!dspi->wcount && !dspi->rcount)
500 complete(&dspi->done);
501}
502
503static void davinci_spi_dma_tx_callback(void *data)
504{
505 struct davinci_spi *dspi = (struct davinci_spi *)data;
506
507 dspi->wcount = 0;
508
509 if (!dspi->wcount && !dspi->rcount)
510 complete(&dspi->done);
511}
512
513/**
514 * davinci_spi_bufs - functions which will handle transfer data
515 * @spi: spi device on which data transfer to be done
516 * @t: spi transfer in which transfer info is filled
517 *
518 * This function will put data to be transferred into data register
519 * of SPI controller and then wait until the completion will be marked
520 * by the IRQ Handler.
521 */
522static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
523{
524 struct davinci_spi *dspi;
525 int data_type, ret = -ENOMEM;
526 u32 tx_data, spidat1;
527 u32 errors = 0;
528 struct davinci_spi_config *spicfg;
529 struct davinci_spi_platform_data *pdata;
530 unsigned uninitialized_var(rx_buf_count);
531 void *dummy_buf = NULL;
532 struct scatterlist sg_rx, sg_tx;
533
534 dspi = spi_master_get_devdata(spi->master);
535 pdata = &dspi->pdata;
536 spicfg = (struct davinci_spi_config *)spi->controller_data;
537 if (!spicfg)
538 spicfg = &davinci_spi_default_cfg;
539
540 /* convert len to words based on bits_per_word */
541 data_type = dspi->bytes_per_word[spi->chip_select];
542
543 dspi->tx = t->tx_buf;
544 dspi->rx = t->rx_buf;
545 dspi->wcount = t->len / data_type;
546 dspi->rcount = dspi->wcount;
547
548 spidat1 = ioread32(dspi->base + SPIDAT1);
549
550 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
551 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
552
553 reinit_completion(&dspi->done);
554
555 if (spicfg->io_type == SPI_IO_TYPE_INTR)
556 set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
557
558 if (spicfg->io_type != SPI_IO_TYPE_DMA) {
559 /* start the transfer */
560 dspi->wcount--;
561 tx_data = dspi->get_tx(dspi);
562 spidat1 &= 0xFFFF0000;
563 spidat1 |= tx_data & 0xFFFF;
564 iowrite32(spidat1, dspi->base + SPIDAT1);
565 } else {
566 struct dma_slave_config dma_rx_conf = {
567 .direction = DMA_DEV_TO_MEM,
568 .src_addr = (unsigned long)dspi->pbase + SPIBUF,
569 .src_addr_width = data_type,
570 .src_maxburst = 1,
571 };
572 struct dma_slave_config dma_tx_conf = {
573 .direction = DMA_MEM_TO_DEV,
574 .dst_addr = (unsigned long)dspi->pbase + SPIDAT1,
575 .dst_addr_width = data_type,
576 .dst_maxburst = 1,
577 };
578 struct dma_async_tx_descriptor *rxdesc;
579 struct dma_async_tx_descriptor *txdesc;
580 void *buf;
581
582 dummy_buf = kzalloc(t->len, GFP_KERNEL);
583 if (!dummy_buf)
584 goto err_alloc_dummy_buf;
585
586 dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf);
587 dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf);
588
589 sg_init_table(&sg_rx, 1);
590 if (!t->rx_buf)
591 buf = dummy_buf;
592 else
593 buf = t->rx_buf;
594 t->rx_dma = dma_map_single(&spi->dev, buf,
595 t->len, DMA_FROM_DEVICE);
596 if (!t->rx_dma) {
597 ret = -EFAULT;
598 goto err_rx_map;
599 }
600 sg_dma_address(&sg_rx) = t->rx_dma;
601 sg_dma_len(&sg_rx) = t->len;
602
603 sg_init_table(&sg_tx, 1);
604 if (!t->tx_buf)
605 buf = dummy_buf;
606 else
607 buf = (void *)t->tx_buf;
608 t->tx_dma = dma_map_single(&spi->dev, buf,
609 t->len, DMA_TO_DEVICE);
610 if (!t->tx_dma) {
611 ret = -EFAULT;
612 goto err_tx_map;
613 }
614 sg_dma_address(&sg_tx) = t->tx_dma;
615 sg_dma_len(&sg_tx) = t->len;
616
617 rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx,
618 &sg_rx, 1, DMA_DEV_TO_MEM,
619 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
620 if (!rxdesc)
621 goto err_desc;
622
623 txdesc = dmaengine_prep_slave_sg(dspi->dma_tx,
624 &sg_tx, 1, DMA_MEM_TO_DEV,
625 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
626 if (!txdesc)
627 goto err_desc;
628
629 rxdesc->callback = davinci_spi_dma_rx_callback;
630 rxdesc->callback_param = (void *)dspi;
631 txdesc->callback = davinci_spi_dma_tx_callback;
632 txdesc->callback_param = (void *)dspi;
633
634 if (pdata->cshold_bug)
635 iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2);
636
637 dmaengine_submit(rxdesc);
638 dmaengine_submit(txdesc);
639
640 dma_async_issue_pending(dspi->dma_rx);
641 dma_async_issue_pending(dspi->dma_tx);
642
643 set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
644 }
645
646 /* Wait for the transfer to complete */
647 if (spicfg->io_type != SPI_IO_TYPE_POLL) {
648 wait_for_completion_interruptible(&(dspi->done));
649 } else {
650 while (dspi->rcount > 0 || dspi->wcount > 0) {
651 errors = davinci_spi_process_events(dspi);
652 if (errors)
653 break;
654 cpu_relax();
655 }
656 }
657
658 clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
659 if (spicfg->io_type == SPI_IO_TYPE_DMA) {
660 clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
661
662 dma_unmap_single(&spi->dev, t->rx_dma,
663 t->len, DMA_FROM_DEVICE);
664 dma_unmap_single(&spi->dev, t->tx_dma,
665 t->len, DMA_TO_DEVICE);
666 kfree(dummy_buf);
667 }
668
669 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
670 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
671
672 /*
673 * Check for bit error, desync error,parity error,timeout error and
674 * receive overflow errors
675 */
676 if (errors) {
677 ret = davinci_spi_check_error(dspi, errors);
678 WARN(!ret, "%s: error reported but no error found!\n",
679 dev_name(&spi->dev));
680 return ret;
681 }
682
683 if (dspi->rcount != 0 || dspi->wcount != 0) {
684 dev_err(&spi->dev, "SPI data transfer error\n");
685 return -EIO;
686 }
687
688 return t->len;
689
690err_desc:
691 dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE);
692err_tx_map:
693 dma_unmap_single(&spi->dev, t->rx_dma, t->len, DMA_FROM_DEVICE);
694err_rx_map:
695 kfree(dummy_buf);
696err_alloc_dummy_buf:
697 return ret;
698}
699
700/**
701 * dummy_thread_fn - dummy thread function
702 * @irq: IRQ number for this SPI Master
703 * @context_data: structure for SPI Master controller davinci_spi
704 *
705 * This is to satisfy the request_threaded_irq() API so that the irq
706 * handler is called in interrupt context.
707 */
708static irqreturn_t dummy_thread_fn(s32 irq, void *data)
709{
710 return IRQ_HANDLED;
711}
712
713/**
714 * davinci_spi_irq - Interrupt handler for SPI Master Controller
715 * @irq: IRQ number for this SPI Master
716 * @context_data: structure for SPI Master controller davinci_spi
717 *
718 * ISR will determine that interrupt arrives either for READ or WRITE command.
719 * According to command it will do the appropriate action. It will check
720 * transfer length and if it is not zero then dispatch transfer command again.
721 * If transfer length is zero then it will indicate the COMPLETION so that
722 * davinci_spi_bufs function can go ahead.
723 */
724static irqreturn_t davinci_spi_irq(s32 irq, void *data)
725{
726 struct davinci_spi *dspi = data;
727 int status;
728
729 status = davinci_spi_process_events(dspi);
730 if (unlikely(status != 0))
731 clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
732
733 if ((!dspi->rcount && !dspi->wcount) || status)
734 complete(&dspi->done);
735
736 return IRQ_HANDLED;
737}
738
739static int davinci_spi_request_dma(struct davinci_spi *dspi)
740{
741 dma_cap_mask_t mask;
742 struct device *sdev = dspi->bitbang.master->dev.parent;
743 int r;
744
745 dma_cap_zero(mask);
746 dma_cap_set(DMA_SLAVE, mask);
747
748 dspi->dma_rx = dma_request_channel(mask, edma_filter_fn,
749 &dspi->dma_rx_chnum);
750 if (!dspi->dma_rx) {
751 dev_err(sdev, "request RX DMA channel failed\n");
752 r = -ENODEV;
753 goto rx_dma_failed;
754 }
755
756 dspi->dma_tx = dma_request_channel(mask, edma_filter_fn,
757 &dspi->dma_tx_chnum);
758 if (!dspi->dma_tx) {
759 dev_err(sdev, "request TX DMA channel failed\n");
760 r = -ENODEV;
761 goto tx_dma_failed;
762 }
763
764 return 0;
765
766tx_dma_failed:
767 dma_release_channel(dspi->dma_rx);
768rx_dma_failed:
769 return r;
770}
771
772#if defined(CONFIG_OF)
773static const struct of_device_id davinci_spi_of_match[] = {
774 {
775 .compatible = "ti,dm6441-spi",
776 },
777 {
778 .compatible = "ti,da830-spi",
779 .data = (void *)SPI_VERSION_2,
780 },
781 { },
782};
783MODULE_DEVICE_TABLE(of, davinci_spi_of_match);
784
785/**
786 * spi_davinci_get_pdata - Get platform data from DTS binding
787 * @pdev: ptr to platform data
788 * @dspi: ptr to driver data
789 *
790 * Parses and populates pdata in dspi from device tree bindings.
791 *
792 * NOTE: Not all platform data params are supported currently.
793 */
794static int spi_davinci_get_pdata(struct platform_device *pdev,
795 struct davinci_spi *dspi)
796{
797 struct device_node *node = pdev->dev.of_node;
798 struct davinci_spi_platform_data *pdata;
799 unsigned int num_cs, intr_line = 0;
800 const struct of_device_id *match;
801
802 pdata = &dspi->pdata;
803
804 pdata->version = SPI_VERSION_1;
805 match = of_match_device(davinci_spi_of_match, &pdev->dev);
806 if (!match)
807 return -ENODEV;
808
809 /* match data has the SPI version number for SPI_VERSION_2 */
810 if (match->data == (void *)SPI_VERSION_2)
811 pdata->version = SPI_VERSION_2;
812
813 /*
814 * default num_cs is 1 and all chipsel are internal to the chip
815 * indicated by chip_sel being NULL. GPIO based CS is not
816 * supported yet in DT bindings.
817 */
818 num_cs = 1;
819 of_property_read_u32(node, "num-cs", &num_cs);
820 pdata->num_chipselect = num_cs;
821 of_property_read_u32(node, "ti,davinci-spi-intr-line", &intr_line);
822 pdata->intr_line = intr_line;
823 return 0;
824}
825#else
826static struct davinci_spi_platform_data
827 *spi_davinci_get_pdata(struct platform_device *pdev,
828 struct davinci_spi *dspi)
829{
830 return -ENODEV;
831}
832#endif
833
834/**
835 * davinci_spi_probe - probe function for SPI Master Controller
836 * @pdev: platform_device structure which contains plateform specific data
837 *
838 * According to Linux Device Model this function will be invoked by Linux
839 * with platform_device struct which contains the device specific info.
840 * This function will map the SPI controller's memory, register IRQ,
841 * Reset SPI controller and setting its registers to default value.
842 * It will invoke spi_bitbang_start to create work queue so that client driver
843 * can register transfer method to work queue.
844 */
845static int davinci_spi_probe(struct platform_device *pdev)
846{
847 struct spi_master *master;
848 struct davinci_spi *dspi;
849 struct davinci_spi_platform_data *pdata;
850 struct resource *r;
851 resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
852 resource_size_t dma_tx_chan = SPI_NO_RESOURCE;
853 int i = 0, ret = 0;
854 u32 spipc0;
855
856 master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
857 if (master == NULL) {
858 ret = -ENOMEM;
859 goto err;
860 }
861
862 platform_set_drvdata(pdev, master);
863
864 dspi = spi_master_get_devdata(master);
865
866 if (dev_get_platdata(&pdev->dev)) {
867 pdata = dev_get_platdata(&pdev->dev);
868 dspi->pdata = *pdata;
869 } else {
870 /* update dspi pdata with that from the DT */
871 ret = spi_davinci_get_pdata(pdev, dspi);
872 if (ret < 0)
873 goto free_master;
874 }
875
876 /* pdata in dspi is now updated and point pdata to that */
877 pdata = &dspi->pdata;
878
879 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
880 if (r == NULL) {
881 ret = -ENOENT;
882 goto free_master;
883 }
884
885 dspi->pbase = r->start;
886
887 dspi->base = devm_ioremap_resource(&pdev->dev, r);
888 if (IS_ERR(dspi->base)) {
889 ret = PTR_ERR(dspi->base);
890 goto free_master;
891 }
892
893 dspi->irq = platform_get_irq(pdev, 0);
894 if (dspi->irq <= 0) {
895 ret = -EINVAL;
896 goto free_master;
897 }
898
899 ret = devm_request_threaded_irq(&pdev->dev, dspi->irq, davinci_spi_irq,
900 dummy_thread_fn, 0, dev_name(&pdev->dev), dspi);
901 if (ret)
902 goto free_master;
903
904 dspi->bitbang.master = master;
905
906 dspi->clk = devm_clk_get(&pdev->dev, NULL);
907 if (IS_ERR(dspi->clk)) {
908 ret = -ENODEV;
909 goto free_master;
910 }
911 clk_prepare_enable(dspi->clk);
912
913 master->dev.of_node = pdev->dev.of_node;
914 master->bus_num = pdev->id;
915 master->num_chipselect = pdata->num_chipselect;
916 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
917 master->setup = davinci_spi_setup;
918
919 dspi->bitbang.chipselect = davinci_spi_chipselect;
920 dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
921
922 dspi->version = pdata->version;
923
924 dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
925 if (dspi->version == SPI_VERSION_2)
926 dspi->bitbang.flags |= SPI_READY;
927
928 r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
929 if (r)
930 dma_rx_chan = r->start;
931 r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
932 if (r)
933 dma_tx_chan = r->start;
934
935 dspi->bitbang.txrx_bufs = davinci_spi_bufs;
936 if (dma_rx_chan != SPI_NO_RESOURCE &&
937 dma_tx_chan != SPI_NO_RESOURCE) {
938 dspi->dma_rx_chnum = dma_rx_chan;
939 dspi->dma_tx_chnum = dma_tx_chan;
940
941 ret = davinci_spi_request_dma(dspi);
942 if (ret)
943 goto free_clk;
944
945 dev_info(&pdev->dev, "DMA: supported\n");
946 dev_info(&pdev->dev, "DMA: RX channel: %pa, TX channel: %pa, "
947 "event queue: %d\n", &dma_rx_chan, &dma_tx_chan,
948 pdata->dma_event_q);
949 }
950
951 dspi->get_rx = davinci_spi_rx_buf_u8;
952 dspi->get_tx = davinci_spi_tx_buf_u8;
953
954 init_completion(&dspi->done);
955
956 /* Reset In/OUT SPI module */
957 iowrite32(0, dspi->base + SPIGCR0);
958 udelay(100);
959 iowrite32(1, dspi->base + SPIGCR0);
960
961 /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */
962 spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
963 iowrite32(spipc0, dspi->base + SPIPC0);
964
965 /* initialize chip selects */
966 if (pdata->chip_sel) {
967 for (i = 0; i < pdata->num_chipselect; i++) {
968 if (pdata->chip_sel[i] != SPI_INTERN_CS)
969 gpio_direction_output(pdata->chip_sel[i], 1);
970 }
971 }
972
973 if (pdata->intr_line)
974 iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
975 else
976 iowrite32(SPI_INTLVL_0, dspi->base + SPILVL);
977
978 iowrite32(CS_DEFAULT, dspi->base + SPIDEF);
979
980 /* master mode default */
981 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK);
982 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
983 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
984
985 ret = spi_bitbang_start(&dspi->bitbang);
986 if (ret)
987 goto free_dma;
988
989 dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base);
990
991 return ret;
992
993free_dma:
994 dma_release_channel(dspi->dma_rx);
995 dma_release_channel(dspi->dma_tx);
996free_clk:
997 clk_disable_unprepare(dspi->clk);
998free_master:
999 spi_master_put(master);
1000err:
1001 return ret;
1002}
1003
1004/**
1005 * davinci_spi_remove - remove function for SPI Master Controller
1006 * @pdev: platform_device structure which contains plateform specific data
1007 *
1008 * This function will do the reverse action of davinci_spi_probe function
1009 * It will free the IRQ and SPI controller's memory region.
1010 * It will also call spi_bitbang_stop to destroy the work queue which was
1011 * created by spi_bitbang_start.
1012 */
1013static int davinci_spi_remove(struct platform_device *pdev)
1014{
1015 struct davinci_spi *dspi;
1016 struct spi_master *master;
1017
1018 master = platform_get_drvdata(pdev);
1019 dspi = spi_master_get_devdata(master);
1020
1021 spi_bitbang_stop(&dspi->bitbang);
1022
1023 clk_disable_unprepare(dspi->clk);
1024 spi_master_put(master);
1025
1026 return 0;
1027}
1028
1029static struct platform_driver davinci_spi_driver = {
1030 .driver = {
1031 .name = "spi_davinci",
1032 .owner = THIS_MODULE,
1033 .of_match_table = of_match_ptr(davinci_spi_of_match),
1034 },
1035 .probe = davinci_spi_probe,
1036 .remove = davinci_spi_remove,
1037};
1038module_platform_driver(davinci_spi_driver);
1039
1040MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
1041MODULE_LICENSE("GPL");