Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Procedures for creating, accessing and interpreting the device tree.
4 *
5 * Paul Mackerras August 1996.
6 * Copyright (C) 1996-2005 Paul Mackerras.
7 *
8 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
9 * {engebret|bergner}@us.ibm.com
10 */
11
12#undef DEBUG
13
14#include <stdarg.h>
15#include <linux/kernel.h>
16#include <linux/string.h>
17#include <linux/init.h>
18#include <linux/threads.h>
19#include <linux/spinlock.h>
20#include <linux/types.h>
21#include <linux/pci.h>
22#include <linux/delay.h>
23#include <linux/initrd.h>
24#include <linux/bitops.h>
25#include <linux/export.h>
26#include <linux/kexec.h>
27#include <linux/irq.h>
28#include <linux/memblock.h>
29#include <linux/of.h>
30#include <linux/of_fdt.h>
31#include <linux/libfdt.h>
32#include <linux/cpu.h>
33#include <linux/pgtable.h>
34
35#include <asm/prom.h>
36#include <asm/rtas.h>
37#include <asm/page.h>
38#include <asm/processor.h>
39#include <asm/irq.h>
40#include <asm/io.h>
41#include <asm/kdump.h>
42#include <asm/smp.h>
43#include <asm/mmu.h>
44#include <asm/paca.h>
45#include <asm/powernv.h>
46#include <asm/iommu.h>
47#include <asm/btext.h>
48#include <asm/sections.h>
49#include <asm/machdep.h>
50#include <asm/pci-bridge.h>
51#include <asm/kexec.h>
52#include <asm/opal.h>
53#include <asm/fadump.h>
54#include <asm/epapr_hcalls.h>
55#include <asm/firmware.h>
56#include <asm/dt_cpu_ftrs.h>
57#include <asm/drmem.h>
58#include <asm/ultravisor.h>
59
60#include <mm/mmu_decl.h>
61
62#ifdef DEBUG
63#define DBG(fmt...) printk(KERN_ERR fmt)
64#else
65#define DBG(fmt...)
66#endif
67
68int *chip_id_lookup_table;
69
70#ifdef CONFIG_PPC64
71int __initdata iommu_is_off;
72int __initdata iommu_force_on;
73unsigned long tce_alloc_start, tce_alloc_end;
74u64 ppc64_rma_size;
75#endif
76static phys_addr_t first_memblock_size;
77static int __initdata boot_cpu_count;
78
79static int __init early_parse_mem(char *p)
80{
81 if (!p)
82 return 1;
83
84 memory_limit = PAGE_ALIGN(memparse(p, &p));
85 DBG("memory limit = 0x%llx\n", memory_limit);
86
87 return 0;
88}
89early_param("mem", early_parse_mem);
90
91/*
92 * overlaps_initrd - check for overlap with page aligned extension of
93 * initrd.
94 */
95static inline int overlaps_initrd(unsigned long start, unsigned long size)
96{
97#ifdef CONFIG_BLK_DEV_INITRD
98 if (!initrd_start)
99 return 0;
100
101 return (start + size) > ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
102 start <= ALIGN(initrd_end, PAGE_SIZE);
103#else
104 return 0;
105#endif
106}
107
108/**
109 * move_device_tree - move tree to an unused area, if needed.
110 *
111 * The device tree may be allocated beyond our memory limit, or inside the
112 * crash kernel region for kdump, or within the page aligned range of initrd.
113 * If so, move it out of the way.
114 */
115static void __init move_device_tree(void)
116{
117 unsigned long start, size;
118 void *p;
119
120 DBG("-> move_device_tree\n");
121
122 start = __pa(initial_boot_params);
123 size = fdt_totalsize(initial_boot_params);
124
125 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
126 !memblock_is_memory(start + size - 1) ||
127 overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) {
128 p = memblock_alloc_raw(size, PAGE_SIZE);
129 if (!p)
130 panic("Failed to allocate %lu bytes to move device tree\n",
131 size);
132 memcpy(p, initial_boot_params, size);
133 initial_boot_params = p;
134 DBG("Moved device tree to 0x%px\n", p);
135 }
136
137 DBG("<- move_device_tree\n");
138}
139
140/*
141 * ibm,pa-features is a per-cpu property that contains a string of
142 * attribute descriptors, each of which has a 2 byte header plus up
143 * to 254 bytes worth of processor attribute bits. First header
144 * byte specifies the number of bytes following the header.
145 * Second header byte is an "attribute-specifier" type, of which
146 * zero is the only currently-defined value.
147 * Implementation: Pass in the byte and bit offset for the feature
148 * that we are interested in. The function will return -1 if the
149 * pa-features property is missing, or a 1/0 to indicate if the feature
150 * is supported/not supported. Note that the bit numbers are
151 * big-endian to match the definition in PAPR.
152 */
153static struct ibm_pa_feature {
154 unsigned long cpu_features; /* CPU_FTR_xxx bit */
155 unsigned long mmu_features; /* MMU_FTR_xxx bit */
156 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
157 unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */
158 unsigned char pabyte; /* byte number in ibm,pa-features */
159 unsigned char pabit; /* bit number (big-endian) */
160 unsigned char invert; /* if 1, pa bit set => clear feature */
161} ibm_pa_features[] __initdata = {
162 { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU },
163 { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU },
164 { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
165 { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
166 { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
167#ifdef CONFIG_PPC_RADIX_MMU
168 { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX | MMU_FTR_GTSE },
169#endif
170 { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
171 .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
172 /*
173 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
174 * we don't want to turn on TM here, so we use the *_COMP versions
175 * which are 0 if the kernel doesn't support TM.
176 */
177 { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
178 .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
179
180 { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
181};
182
183static void __init scan_features(unsigned long node, const unsigned char *ftrs,
184 unsigned long tablelen,
185 struct ibm_pa_feature *fp,
186 unsigned long ft_size)
187{
188 unsigned long i, len, bit;
189
190 /* find descriptor with type == 0 */
191 for (;;) {
192 if (tablelen < 3)
193 return;
194 len = 2 + ftrs[0];
195 if (tablelen < len)
196 return; /* descriptor 0 not found */
197 if (ftrs[1] == 0)
198 break;
199 tablelen -= len;
200 ftrs += len;
201 }
202
203 /* loop over bits we know about */
204 for (i = 0; i < ft_size; ++i, ++fp) {
205 if (fp->pabyte >= ftrs[0])
206 continue;
207 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
208 if (bit ^ fp->invert) {
209 cur_cpu_spec->cpu_features |= fp->cpu_features;
210 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
211 cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
212 cur_cpu_spec->mmu_features |= fp->mmu_features;
213 } else {
214 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
215 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
216 cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
217 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
218 }
219 }
220}
221
222static void __init check_cpu_pa_features(unsigned long node)
223{
224 const unsigned char *pa_ftrs;
225 int tablelen;
226
227 pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
228 if (pa_ftrs == NULL)
229 return;
230
231 scan_features(node, pa_ftrs, tablelen,
232 ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
233}
234
235#ifdef CONFIG_PPC_BOOK3S_64
236static void __init init_mmu_slb_size(unsigned long node)
237{
238 const __be32 *slb_size_ptr;
239
240 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
241 of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
242
243 if (slb_size_ptr)
244 mmu_slb_size = be32_to_cpup(slb_size_ptr);
245}
246#else
247#define init_mmu_slb_size(node) do { } while(0)
248#endif
249
250static struct feature_property {
251 const char *name;
252 u32 min_value;
253 unsigned long cpu_feature;
254 unsigned long cpu_user_ftr;
255} feature_properties[] __initdata = {
256#ifdef CONFIG_ALTIVEC
257 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
258 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
259#endif /* CONFIG_ALTIVEC */
260#ifdef CONFIG_VSX
261 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
262 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
263#endif /* CONFIG_VSX */
264#ifdef CONFIG_PPC64
265 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
266 {"ibm,purr", 1, CPU_FTR_PURR, 0},
267 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
268#endif /* CONFIG_PPC64 */
269};
270
271#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
272static __init void identical_pvr_fixup(unsigned long node)
273{
274 unsigned int pvr;
275 const char *model = of_get_flat_dt_prop(node, "model", NULL);
276
277 /*
278 * Since 440GR(x)/440EP(x) processors have the same pvr,
279 * we check the node path and set bit 28 in the cur_cpu_spec
280 * pvr for EP(x) processor version. This bit is always 0 in
281 * the "real" pvr. Then we call identify_cpu again with
282 * the new logical pvr to enable FPU support.
283 */
284 if (model && strstr(model, "440EP")) {
285 pvr = cur_cpu_spec->pvr_value | 0x8;
286 identify_cpu(0, pvr);
287 DBG("Using logical pvr %x for %s\n", pvr, model);
288 }
289}
290#else
291#define identical_pvr_fixup(node) do { } while(0)
292#endif
293
294static void __init check_cpu_feature_properties(unsigned long node)
295{
296 int i;
297 struct feature_property *fp = feature_properties;
298 const __be32 *prop;
299
300 for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) {
301 prop = of_get_flat_dt_prop(node, fp->name, NULL);
302 if (prop && be32_to_cpup(prop) >= fp->min_value) {
303 cur_cpu_spec->cpu_features |= fp->cpu_feature;
304 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
305 }
306 }
307}
308
309static int __init early_init_dt_scan_cpus(unsigned long node,
310 const char *uname, int depth,
311 void *data)
312{
313 const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
314 const __be32 *prop;
315 const __be32 *intserv;
316 int i, nthreads;
317 int len;
318 int found = -1;
319 int found_thread = 0;
320
321 /* We are scanning "cpu" nodes only */
322 if (type == NULL || strcmp(type, "cpu") != 0)
323 return 0;
324
325 /* Get physical cpuid */
326 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
327 if (!intserv)
328 intserv = of_get_flat_dt_prop(node, "reg", &len);
329
330 nthreads = len / sizeof(int);
331
332 /*
333 * Now see if any of these threads match our boot cpu.
334 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
335 */
336 for (i = 0; i < nthreads; i++) {
337 if (be32_to_cpu(intserv[i]) ==
338 fdt_boot_cpuid_phys(initial_boot_params)) {
339 found = boot_cpu_count;
340 found_thread = i;
341 }
342#ifdef CONFIG_SMP
343 /* logical cpu id is always 0 on UP kernels */
344 boot_cpu_count++;
345#endif
346 }
347
348 /* Not the boot CPU */
349 if (found < 0)
350 return 0;
351
352 DBG("boot cpu: logical %d physical %d\n", found,
353 be32_to_cpu(intserv[found_thread]));
354 boot_cpuid = found;
355
356 /*
357 * PAPR defines "logical" PVR values for cpus that
358 * meet various levels of the architecture:
359 * 0x0f000001 Architecture version 2.04
360 * 0x0f000002 Architecture version 2.05
361 * If the cpu-version property in the cpu node contains
362 * such a value, we call identify_cpu again with the
363 * logical PVR value in order to use the cpu feature
364 * bits appropriate for the architecture level.
365 *
366 * A POWER6 partition in "POWER6 architected" mode
367 * uses the 0x0f000002 PVR value; in POWER5+ mode
368 * it uses 0x0f000001.
369 *
370 * If we're using device tree CPU feature discovery then we don't
371 * support the cpu-version property, and it's the responsibility of the
372 * firmware/hypervisor to provide the correct feature set for the
373 * architecture level via the ibm,powerpc-cpu-features binding.
374 */
375 if (!dt_cpu_ftrs_in_use()) {
376 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
377 if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
378 identify_cpu(0, be32_to_cpup(prop));
379
380 check_cpu_feature_properties(node);
381 check_cpu_pa_features(node);
382 }
383
384 identical_pvr_fixup(node);
385 init_mmu_slb_size(node);
386
387#ifdef CONFIG_PPC64
388 if (nthreads == 1)
389 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
390 else if (!dt_cpu_ftrs_in_use())
391 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
392 allocate_paca(boot_cpuid);
393#endif
394 set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
395
396 return 0;
397}
398
399static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
400 const char *uname,
401 int depth, void *data)
402{
403 const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
404
405 /* Use common scan routine to determine if this is the chosen node */
406 if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
407 return 0;
408
409#ifdef CONFIG_PPC64
410 /* check if iommu is forced on or off */
411 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
412 iommu_is_off = 1;
413 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
414 iommu_force_on = 1;
415#endif
416
417 /* mem=x on the command line is the preferred mechanism */
418 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
419 if (lprop)
420 memory_limit = *lprop;
421
422#ifdef CONFIG_PPC64
423 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
424 if (lprop)
425 tce_alloc_start = *lprop;
426 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
427 if (lprop)
428 tce_alloc_end = *lprop;
429#endif
430
431#ifdef CONFIG_KEXEC_CORE
432 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
433 if (lprop)
434 crashk_res.start = *lprop;
435
436 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
437 if (lprop)
438 crashk_res.end = crashk_res.start + *lprop - 1;
439#endif
440
441 /* break now */
442 return 1;
443}
444
445/*
446 * Compare the range against max mem limit and update
447 * size if it cross the limit.
448 */
449
450#ifdef CONFIG_SPARSEMEM
451static bool validate_mem_limit(u64 base, u64 *size)
452{
453 u64 max_mem = 1UL << (MAX_PHYSMEM_BITS);
454
455 if (base >= max_mem)
456 return false;
457 if ((base + *size) > max_mem)
458 *size = max_mem - base;
459 return true;
460}
461#else
462static bool validate_mem_limit(u64 base, u64 *size)
463{
464 return true;
465}
466#endif
467
468#ifdef CONFIG_PPC_PSERIES
469/*
470 * Interpret the ibm dynamic reconfiguration memory LMBs.
471 * This contains a list of memory blocks along with NUMA affinity
472 * information.
473 */
474static int __init early_init_drmem_lmb(struct drmem_lmb *lmb,
475 const __be32 **usm,
476 void *data)
477{
478 u64 base, size;
479 int is_kexec_kdump = 0, rngs;
480
481 base = lmb->base_addr;
482 size = drmem_lmb_size();
483 rngs = 1;
484
485 /*
486 * Skip this block if the reserved bit is set in flags
487 * or if the block is not assigned to this partition.
488 */
489 if ((lmb->flags & DRCONF_MEM_RESERVED) ||
490 !(lmb->flags & DRCONF_MEM_ASSIGNED))
491 return 0;
492
493 if (*usm)
494 is_kexec_kdump = 1;
495
496 if (is_kexec_kdump) {
497 /*
498 * For each memblock in ibm,dynamic-memory, a
499 * corresponding entry in linux,drconf-usable-memory
500 * property contains a counter 'p' followed by 'p'
501 * (base, size) duple. Now read the counter from
502 * linux,drconf-usable-memory property
503 */
504 rngs = dt_mem_next_cell(dt_root_size_cells, usm);
505 if (!rngs) /* there are no (base, size) duple */
506 return 0;
507 }
508
509 do {
510 if (is_kexec_kdump) {
511 base = dt_mem_next_cell(dt_root_addr_cells, usm);
512 size = dt_mem_next_cell(dt_root_size_cells, usm);
513 }
514
515 if (iommu_is_off) {
516 if (base >= 0x80000000ul)
517 continue;
518 if ((base + size) > 0x80000000ul)
519 size = 0x80000000ul - base;
520 }
521
522 if (!validate_mem_limit(base, &size))
523 continue;
524
525 DBG("Adding: %llx -> %llx\n", base, size);
526 memblock_add(base, size);
527
528 if (lmb->flags & DRCONF_MEM_HOTREMOVABLE)
529 memblock_mark_hotplug(base, size);
530 } while (--rngs);
531
532 return 0;
533}
534#endif /* CONFIG_PPC_PSERIES */
535
536static int __init early_init_dt_scan_memory_ppc(unsigned long node,
537 const char *uname,
538 int depth, void *data)
539{
540#ifdef CONFIG_PPC_PSERIES
541 if (depth == 1 &&
542 strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) {
543 walk_drmem_lmbs_early(node, NULL, early_init_drmem_lmb);
544 return 0;
545 }
546#endif
547
548 return early_init_dt_scan_memory(node, uname, depth, data);
549}
550
551/*
552 * For a relocatable kernel, we need to get the memstart_addr first,
553 * then use it to calculate the virtual kernel start address. This has
554 * to happen at a very early stage (before machine_init). In this case,
555 * we just want to get the memstart_address and would not like to mess the
556 * memblock at this stage. So introduce a variable to skip the memblock_add()
557 * for this reason.
558 */
559#ifdef CONFIG_RELOCATABLE
560static int add_mem_to_memblock = 1;
561#else
562#define add_mem_to_memblock 1
563#endif
564
565void __init early_init_dt_add_memory_arch(u64 base, u64 size)
566{
567#ifdef CONFIG_PPC64
568 if (iommu_is_off) {
569 if (base >= 0x80000000ul)
570 return;
571 if ((base + size) > 0x80000000ul)
572 size = 0x80000000ul - base;
573 }
574#endif
575 /* Keep track of the beginning of memory -and- the size of
576 * the very first block in the device-tree as it represents
577 * the RMA on ppc64 server
578 */
579 if (base < memstart_addr) {
580 memstart_addr = base;
581 first_memblock_size = size;
582 }
583
584 /* Add the chunk to the MEMBLOCK list */
585 if (add_mem_to_memblock) {
586 if (validate_mem_limit(base, &size))
587 memblock_add(base, size);
588 }
589}
590
591static void __init early_reserve_mem_dt(void)
592{
593 unsigned long i, dt_root;
594 int len;
595 const __be32 *prop;
596
597 early_init_fdt_reserve_self();
598 early_init_fdt_scan_reserved_mem();
599
600 dt_root = of_get_flat_dt_root();
601
602 prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
603
604 if (!prop)
605 return;
606
607 DBG("Found new-style reserved-ranges\n");
608
609 /* Each reserved range is an (address,size) pair, 2 cells each,
610 * totalling 4 cells per range. */
611 for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
612 u64 base, size;
613
614 base = of_read_number(prop + (i * 4) + 0, 2);
615 size = of_read_number(prop + (i * 4) + 2, 2);
616
617 if (size) {
618 DBG("reserving: %llx -> %llx\n", base, size);
619 memblock_reserve(base, size);
620 }
621 }
622}
623
624static void __init early_reserve_mem(void)
625{
626 __be64 *reserve_map;
627
628 reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
629 fdt_off_mem_rsvmap(initial_boot_params));
630
631 /* Look for the new "reserved-regions" property in the DT */
632 early_reserve_mem_dt();
633
634#ifdef CONFIG_BLK_DEV_INITRD
635 /* Then reserve the initrd, if any */
636 if (initrd_start && (initrd_end > initrd_start)) {
637 memblock_reserve(ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
638 ALIGN(initrd_end, PAGE_SIZE) -
639 ALIGN_DOWN(initrd_start, PAGE_SIZE));
640 }
641#endif /* CONFIG_BLK_DEV_INITRD */
642
643#ifdef CONFIG_PPC32
644 /*
645 * Handle the case where we might be booting from an old kexec
646 * image that setup the mem_rsvmap as pairs of 32-bit values
647 */
648 if (be64_to_cpup(reserve_map) > 0xffffffffull) {
649 u32 base_32, size_32;
650 __be32 *reserve_map_32 = (__be32 *)reserve_map;
651
652 DBG("Found old 32-bit reserve map\n");
653
654 while (1) {
655 base_32 = be32_to_cpup(reserve_map_32++);
656 size_32 = be32_to_cpup(reserve_map_32++);
657 if (size_32 == 0)
658 break;
659 DBG("reserving: %x -> %x\n", base_32, size_32);
660 memblock_reserve(base_32, size_32);
661 }
662 return;
663 }
664#endif
665}
666
667#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
668static bool tm_disabled __initdata;
669
670static int __init parse_ppc_tm(char *str)
671{
672 bool res;
673
674 if (kstrtobool(str, &res))
675 return -EINVAL;
676
677 tm_disabled = !res;
678
679 return 0;
680}
681early_param("ppc_tm", parse_ppc_tm);
682
683static void __init tm_init(void)
684{
685 if (tm_disabled) {
686 pr_info("Disabling hardware transactional memory (HTM)\n");
687 cur_cpu_spec->cpu_user_features2 &=
688 ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM);
689 cur_cpu_spec->cpu_features &= ~CPU_FTR_TM;
690 return;
691 }
692
693 pnv_tm_init();
694}
695#else
696static void tm_init(void) { }
697#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
698
699#ifdef CONFIG_PPC64
700static void __init save_fscr_to_task(void)
701{
702 /*
703 * Ensure the init_task (pid 0, aka swapper) uses the value of FSCR we
704 * have configured via the device tree features or via __init_FSCR().
705 * That value will then be propagated to pid 1 (init) and all future
706 * processes.
707 */
708 if (early_cpu_has_feature(CPU_FTR_ARCH_207S))
709 init_task.thread.fscr = mfspr(SPRN_FSCR);
710}
711#else
712static inline void save_fscr_to_task(void) {}
713#endif
714
715
716void __init early_init_devtree(void *params)
717{
718 phys_addr_t limit;
719
720 DBG(" -> early_init_devtree(%px)\n", params);
721
722 /* Too early to BUG_ON(), do it by hand */
723 if (!early_init_dt_verify(params))
724 panic("BUG: Failed verifying flat device tree, bad version?");
725
726#ifdef CONFIG_PPC_RTAS
727 /* Some machines might need RTAS info for debugging, grab it now. */
728 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
729#endif
730
731#ifdef CONFIG_PPC_POWERNV
732 /* Some machines might need OPAL info for debugging, grab it now. */
733 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
734
735 /* Scan tree for ultravisor feature */
736 of_scan_flat_dt(early_init_dt_scan_ultravisor, NULL);
737#endif
738
739#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
740 /* scan tree to see if dump is active during last boot */
741 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
742#endif
743
744 /* Retrieve various informations from the /chosen node of the
745 * device-tree, including the platform type, initrd location and
746 * size, TCE reserve, and more ...
747 */
748 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
749
750 /* Scan memory nodes and rebuild MEMBLOCKs */
751 of_scan_flat_dt(early_init_dt_scan_root, NULL);
752 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
753
754 parse_early_param();
755
756 /* make sure we've parsed cmdline for mem= before this */
757 if (memory_limit)
758 first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
759 setup_initial_memory_limit(memstart_addr, first_memblock_size);
760 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
761 memblock_reserve(PHYSICAL_START, __pa(_end) - PHYSICAL_START);
762 /* If relocatable, reserve first 32k for interrupt vectors etc. */
763 if (PHYSICAL_START > MEMORY_START)
764 memblock_reserve(MEMORY_START, 0x8000);
765 reserve_kdump_trampoline();
766#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
767 /*
768 * If we fail to reserve memory for firmware-assisted dump then
769 * fallback to kexec based kdump.
770 */
771 if (fadump_reserve_mem() == 0)
772#endif
773 reserve_crashkernel();
774 early_reserve_mem();
775
776 /* Ensure that total memory size is page-aligned. */
777 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
778 memblock_enforce_memory_limit(limit);
779
780#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_4K_PAGES)
781 if (!early_radix_enabled())
782 memblock_cap_memory_range(0, 1UL << (H_MAX_PHYSMEM_BITS));
783#endif
784
785 memblock_allow_resize();
786 memblock_dump_all();
787
788 DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
789
790 /* We may need to relocate the flat tree, do it now.
791 * FIXME .. and the initrd too? */
792 move_device_tree();
793
794 allocate_paca_ptrs();
795
796 DBG("Scanning CPUs ...\n");
797
798 dt_cpu_ftrs_scan();
799
800 /* Retrieve CPU related informations from the flat tree
801 * (altivec support, boot CPU ID, ...)
802 */
803 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
804 if (boot_cpuid < 0) {
805 printk("Failed to identify boot CPU !\n");
806 BUG();
807 }
808
809 save_fscr_to_task();
810
811#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
812 /* We'll later wait for secondaries to check in; there are
813 * NCPUS-1 non-boot CPUs :-)
814 */
815 spinning_secondaries = boot_cpu_count - 1;
816#endif
817
818 mmu_early_init_devtree();
819
820#ifdef CONFIG_PPC_POWERNV
821 /* Scan and build the list of machine check recoverable ranges */
822 of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
823#endif
824 epapr_paravirt_early_init();
825
826 /* Now try to figure out if we are running on LPAR and so on */
827 pseries_probe_fw_features();
828
829 /*
830 * Initialize pkey features and default AMR/IAMR values
831 */
832 pkey_early_init_devtree();
833
834#ifdef CONFIG_PPC_PS3
835 /* Identify PS3 firmware */
836 if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3"))
837 powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
838#endif
839
840 tm_init();
841
842 DBG(" <- early_init_devtree()\n");
843}
844
845#ifdef CONFIG_RELOCATABLE
846/*
847 * This function run before early_init_devtree, so we have to init
848 * initial_boot_params.
849 */
850void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
851{
852 /* Setup flat device-tree pointer */
853 initial_boot_params = params;
854
855 /*
856 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
857 * mess the memblock.
858 */
859 add_mem_to_memblock = 0;
860 of_scan_flat_dt(early_init_dt_scan_root, NULL);
861 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
862 add_mem_to_memblock = 1;
863
864 if (size)
865 *size = first_memblock_size;
866}
867#endif
868
869/*******
870 *
871 * New implementation of the OF "find" APIs, return a refcounted
872 * object, call of_node_put() when done. The device tree and list
873 * are protected by a rw_lock.
874 *
875 * Note that property management will need some locking as well,
876 * this isn't dealt with yet.
877 *
878 *******/
879
880/**
881 * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
882 * @np: device node of the device
883 *
884 * This looks for a property "ibm,chip-id" in the node or any
885 * of its parents and returns its content, or -1 if it cannot
886 * be found.
887 */
888int of_get_ibm_chip_id(struct device_node *np)
889{
890 of_node_get(np);
891 while (np) {
892 u32 chip_id;
893
894 /*
895 * Skiboot may produce memory nodes that contain more than one
896 * cell in chip-id, we only read the first one here.
897 */
898 if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
899 of_node_put(np);
900 return chip_id;
901 }
902
903 np = of_get_next_parent(np);
904 }
905 return -1;
906}
907EXPORT_SYMBOL(of_get_ibm_chip_id);
908
909/**
910 * cpu_to_chip_id - Return the cpus chip-id
911 * @cpu: The logical cpu number.
912 *
913 * Return the value of the ibm,chip-id property corresponding to the given
914 * logical cpu number. If the chip-id can not be found, returns -1.
915 */
916int cpu_to_chip_id(int cpu)
917{
918 struct device_node *np;
919 int ret = -1, idx;
920
921 idx = cpu / threads_per_core;
922 if (chip_id_lookup_table && chip_id_lookup_table[idx] != -1)
923 return chip_id_lookup_table[idx];
924
925 np = of_get_cpu_node(cpu, NULL);
926 if (np) {
927 ret = of_get_ibm_chip_id(np);
928 of_node_put(np);
929
930 if (chip_id_lookup_table)
931 chip_id_lookup_table[idx] = ret;
932 }
933
934 return ret;
935}
936EXPORT_SYMBOL(cpu_to_chip_id);
937
938bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
939{
940#ifdef CONFIG_SMP
941 /*
942 * Early firmware scanning must use this rather than
943 * get_hard_smp_processor_id because we don't have pacas allocated
944 * until memory topology is discovered.
945 */
946 if (cpu_to_phys_id != NULL)
947 return (int)phys_id == cpu_to_phys_id[cpu];
948#endif
949
950 return (int)phys_id == get_hard_smp_processor_id(cpu);
951}
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Procedures for creating, accessing and interpreting the device tree.
4 *
5 * Paul Mackerras August 1996.
6 * Copyright (C) 1996-2005 Paul Mackerras.
7 *
8 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
9 * {engebret|bergner}@us.ibm.com
10 */
11
12#undef DEBUG
13
14#include <stdarg.h>
15#include <linux/kernel.h>
16#include <linux/string.h>
17#include <linux/init.h>
18#include <linux/threads.h>
19#include <linux/spinlock.h>
20#include <linux/types.h>
21#include <linux/pci.h>
22#include <linux/delay.h>
23#include <linux/initrd.h>
24#include <linux/bitops.h>
25#include <linux/export.h>
26#include <linux/kexec.h>
27#include <linux/irq.h>
28#include <linux/memblock.h>
29#include <linux/of.h>
30#include <linux/of_fdt.h>
31#include <linux/libfdt.h>
32#include <linux/cpu.h>
33
34#include <asm/prom.h>
35#include <asm/rtas.h>
36#include <asm/page.h>
37#include <asm/processor.h>
38#include <asm/irq.h>
39#include <asm/io.h>
40#include <asm/kdump.h>
41#include <asm/smp.h>
42#include <asm/mmu.h>
43#include <asm/paca.h>
44#include <asm/pgtable.h>
45#include <asm/powernv.h>
46#include <asm/iommu.h>
47#include <asm/btext.h>
48#include <asm/sections.h>
49#include <asm/machdep.h>
50#include <asm/pci-bridge.h>
51#include <asm/kexec.h>
52#include <asm/opal.h>
53#include <asm/fadump.h>
54#include <asm/epapr_hcalls.h>
55#include <asm/firmware.h>
56#include <asm/dt_cpu_ftrs.h>
57#include <asm/drmem.h>
58#include <asm/ultravisor.h>
59
60#include <mm/mmu_decl.h>
61
62#ifdef DEBUG
63#define DBG(fmt...) printk(KERN_ERR fmt)
64#else
65#define DBG(fmt...)
66#endif
67
68#ifdef CONFIG_PPC64
69int __initdata iommu_is_off;
70int __initdata iommu_force_on;
71unsigned long tce_alloc_start, tce_alloc_end;
72u64 ppc64_rma_size;
73#endif
74static phys_addr_t first_memblock_size;
75static int __initdata boot_cpu_count;
76
77static int __init early_parse_mem(char *p)
78{
79 if (!p)
80 return 1;
81
82 memory_limit = PAGE_ALIGN(memparse(p, &p));
83 DBG("memory limit = 0x%llx\n", memory_limit);
84
85 return 0;
86}
87early_param("mem", early_parse_mem);
88
89/*
90 * overlaps_initrd - check for overlap with page aligned extension of
91 * initrd.
92 */
93static inline int overlaps_initrd(unsigned long start, unsigned long size)
94{
95#ifdef CONFIG_BLK_DEV_INITRD
96 if (!initrd_start)
97 return 0;
98
99 return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
100 start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
101#else
102 return 0;
103#endif
104}
105
106/**
107 * move_device_tree - move tree to an unused area, if needed.
108 *
109 * The device tree may be allocated beyond our memory limit, or inside the
110 * crash kernel region for kdump, or within the page aligned range of initrd.
111 * If so, move it out of the way.
112 */
113static void __init move_device_tree(void)
114{
115 unsigned long start, size;
116 void *p;
117
118 DBG("-> move_device_tree\n");
119
120 start = __pa(initial_boot_params);
121 size = fdt_totalsize(initial_boot_params);
122
123 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
124 !memblock_is_memory(start + size - 1) ||
125 overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) {
126 p = memblock_alloc_raw(size, PAGE_SIZE);
127 if (!p)
128 panic("Failed to allocate %lu bytes to move device tree\n",
129 size);
130 memcpy(p, initial_boot_params, size);
131 initial_boot_params = p;
132 DBG("Moved device tree to 0x%px\n", p);
133 }
134
135 DBG("<- move_device_tree\n");
136}
137
138/*
139 * ibm,pa-features is a per-cpu property that contains a string of
140 * attribute descriptors, each of which has a 2 byte header plus up
141 * to 254 bytes worth of processor attribute bits. First header
142 * byte specifies the number of bytes following the header.
143 * Second header byte is an "attribute-specifier" type, of which
144 * zero is the only currently-defined value.
145 * Implementation: Pass in the byte and bit offset for the feature
146 * that we are interested in. The function will return -1 if the
147 * pa-features property is missing, or a 1/0 to indicate if the feature
148 * is supported/not supported. Note that the bit numbers are
149 * big-endian to match the definition in PAPR.
150 */
151static struct ibm_pa_feature {
152 unsigned long cpu_features; /* CPU_FTR_xxx bit */
153 unsigned long mmu_features; /* MMU_FTR_xxx bit */
154 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
155 unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */
156 unsigned char pabyte; /* byte number in ibm,pa-features */
157 unsigned char pabit; /* bit number (big-endian) */
158 unsigned char invert; /* if 1, pa bit set => clear feature */
159} ibm_pa_features[] __initdata = {
160 { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU },
161 { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU },
162 { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
163 { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
164 { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
165#ifdef CONFIG_PPC_RADIX_MMU
166 { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX },
167#endif
168 { .pabyte = 1, .pabit = 1, .invert = 1, .cpu_features = CPU_FTR_NODSISRALIGN },
169 { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
170 .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
171 /*
172 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
173 * we don't want to turn on TM here, so we use the *_COMP versions
174 * which are 0 if the kernel doesn't support TM.
175 */
176 { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
177 .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
178};
179
180static void __init scan_features(unsigned long node, const unsigned char *ftrs,
181 unsigned long tablelen,
182 struct ibm_pa_feature *fp,
183 unsigned long ft_size)
184{
185 unsigned long i, len, bit;
186
187 /* find descriptor with type == 0 */
188 for (;;) {
189 if (tablelen < 3)
190 return;
191 len = 2 + ftrs[0];
192 if (tablelen < len)
193 return; /* descriptor 0 not found */
194 if (ftrs[1] == 0)
195 break;
196 tablelen -= len;
197 ftrs += len;
198 }
199
200 /* loop over bits we know about */
201 for (i = 0; i < ft_size; ++i, ++fp) {
202 if (fp->pabyte >= ftrs[0])
203 continue;
204 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
205 if (bit ^ fp->invert) {
206 cur_cpu_spec->cpu_features |= fp->cpu_features;
207 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
208 cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
209 cur_cpu_spec->mmu_features |= fp->mmu_features;
210 } else {
211 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
212 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
213 cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
214 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
215 }
216 }
217}
218
219static void __init check_cpu_pa_features(unsigned long node)
220{
221 const unsigned char *pa_ftrs;
222 int tablelen;
223
224 pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
225 if (pa_ftrs == NULL)
226 return;
227
228 scan_features(node, pa_ftrs, tablelen,
229 ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
230}
231
232#ifdef CONFIG_PPC_BOOK3S_64
233static void __init init_mmu_slb_size(unsigned long node)
234{
235 const __be32 *slb_size_ptr;
236
237 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
238 of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
239
240 if (slb_size_ptr)
241 mmu_slb_size = be32_to_cpup(slb_size_ptr);
242}
243#else
244#define init_mmu_slb_size(node) do { } while(0)
245#endif
246
247static struct feature_property {
248 const char *name;
249 u32 min_value;
250 unsigned long cpu_feature;
251 unsigned long cpu_user_ftr;
252} feature_properties[] __initdata = {
253#ifdef CONFIG_ALTIVEC
254 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
255 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
256#endif /* CONFIG_ALTIVEC */
257#ifdef CONFIG_VSX
258 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
259 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
260#endif /* CONFIG_VSX */
261#ifdef CONFIG_PPC64
262 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
263 {"ibm,purr", 1, CPU_FTR_PURR, 0},
264 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
265#endif /* CONFIG_PPC64 */
266};
267
268#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
269static inline void identical_pvr_fixup(unsigned long node)
270{
271 unsigned int pvr;
272 const char *model = of_get_flat_dt_prop(node, "model", NULL);
273
274 /*
275 * Since 440GR(x)/440EP(x) processors have the same pvr,
276 * we check the node path and set bit 28 in the cur_cpu_spec
277 * pvr for EP(x) processor version. This bit is always 0 in
278 * the "real" pvr. Then we call identify_cpu again with
279 * the new logical pvr to enable FPU support.
280 */
281 if (model && strstr(model, "440EP")) {
282 pvr = cur_cpu_spec->pvr_value | 0x8;
283 identify_cpu(0, pvr);
284 DBG("Using logical pvr %x for %s\n", pvr, model);
285 }
286}
287#else
288#define identical_pvr_fixup(node) do { } while(0)
289#endif
290
291static void __init check_cpu_feature_properties(unsigned long node)
292{
293 int i;
294 struct feature_property *fp = feature_properties;
295 const __be32 *prop;
296
297 for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) {
298 prop = of_get_flat_dt_prop(node, fp->name, NULL);
299 if (prop && be32_to_cpup(prop) >= fp->min_value) {
300 cur_cpu_spec->cpu_features |= fp->cpu_feature;
301 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
302 }
303 }
304}
305
306static int __init early_init_dt_scan_cpus(unsigned long node,
307 const char *uname, int depth,
308 void *data)
309{
310 const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
311 const __be32 *prop;
312 const __be32 *intserv;
313 int i, nthreads;
314 int len;
315 int found = -1;
316 int found_thread = 0;
317
318 /* We are scanning "cpu" nodes only */
319 if (type == NULL || strcmp(type, "cpu") != 0)
320 return 0;
321
322 /* Get physical cpuid */
323 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
324 if (!intserv)
325 intserv = of_get_flat_dt_prop(node, "reg", &len);
326
327 nthreads = len / sizeof(int);
328
329 /*
330 * Now see if any of these threads match our boot cpu.
331 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
332 */
333 for (i = 0; i < nthreads; i++) {
334 if (be32_to_cpu(intserv[i]) ==
335 fdt_boot_cpuid_phys(initial_boot_params)) {
336 found = boot_cpu_count;
337 found_thread = i;
338 }
339#ifdef CONFIG_SMP
340 /* logical cpu id is always 0 on UP kernels */
341 boot_cpu_count++;
342#endif
343 }
344
345 /* Not the boot CPU */
346 if (found < 0)
347 return 0;
348
349 DBG("boot cpu: logical %d physical %d\n", found,
350 be32_to_cpu(intserv[found_thread]));
351 boot_cpuid = found;
352
353 /*
354 * PAPR defines "logical" PVR values for cpus that
355 * meet various levels of the architecture:
356 * 0x0f000001 Architecture version 2.04
357 * 0x0f000002 Architecture version 2.05
358 * If the cpu-version property in the cpu node contains
359 * such a value, we call identify_cpu again with the
360 * logical PVR value in order to use the cpu feature
361 * bits appropriate for the architecture level.
362 *
363 * A POWER6 partition in "POWER6 architected" mode
364 * uses the 0x0f000002 PVR value; in POWER5+ mode
365 * it uses 0x0f000001.
366 *
367 * If we're using device tree CPU feature discovery then we don't
368 * support the cpu-version property, and it's the responsibility of the
369 * firmware/hypervisor to provide the correct feature set for the
370 * architecture level via the ibm,powerpc-cpu-features binding.
371 */
372 if (!dt_cpu_ftrs_in_use()) {
373 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
374 if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
375 identify_cpu(0, be32_to_cpup(prop));
376
377 check_cpu_feature_properties(node);
378 check_cpu_pa_features(node);
379 }
380
381 identical_pvr_fixup(node);
382 init_mmu_slb_size(node);
383
384#ifdef CONFIG_PPC64
385 if (nthreads == 1)
386 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
387 else if (!dt_cpu_ftrs_in_use())
388 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
389 allocate_paca(boot_cpuid);
390#endif
391 set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
392
393 return 0;
394}
395
396static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
397 const char *uname,
398 int depth, void *data)
399{
400 const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
401
402 /* Use common scan routine to determine if this is the chosen node */
403 if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
404 return 0;
405
406#ifdef CONFIG_PPC64
407 /* check if iommu is forced on or off */
408 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
409 iommu_is_off = 1;
410 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
411 iommu_force_on = 1;
412#endif
413
414 /* mem=x on the command line is the preferred mechanism */
415 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
416 if (lprop)
417 memory_limit = *lprop;
418
419#ifdef CONFIG_PPC64
420 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
421 if (lprop)
422 tce_alloc_start = *lprop;
423 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
424 if (lprop)
425 tce_alloc_end = *lprop;
426#endif
427
428#ifdef CONFIG_KEXEC_CORE
429 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
430 if (lprop)
431 crashk_res.start = *lprop;
432
433 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
434 if (lprop)
435 crashk_res.end = crashk_res.start + *lprop - 1;
436#endif
437
438 /* break now */
439 return 1;
440}
441
442/*
443 * Compare the range against max mem limit and update
444 * size if it cross the limit.
445 */
446
447#ifdef CONFIG_SPARSEMEM
448static bool validate_mem_limit(u64 base, u64 *size)
449{
450 u64 max_mem = 1UL << (MAX_PHYSMEM_BITS);
451
452 if (base >= max_mem)
453 return false;
454 if ((base + *size) > max_mem)
455 *size = max_mem - base;
456 return true;
457}
458#else
459static bool validate_mem_limit(u64 base, u64 *size)
460{
461 return true;
462}
463#endif
464
465#ifdef CONFIG_PPC_PSERIES
466/*
467 * Interpret the ibm dynamic reconfiguration memory LMBs.
468 * This contains a list of memory blocks along with NUMA affinity
469 * information.
470 */
471static void __init early_init_drmem_lmb(struct drmem_lmb *lmb,
472 const __be32 **usm)
473{
474 u64 base, size;
475 int is_kexec_kdump = 0, rngs;
476
477 base = lmb->base_addr;
478 size = drmem_lmb_size();
479 rngs = 1;
480
481 /*
482 * Skip this block if the reserved bit is set in flags
483 * or if the block is not assigned to this partition.
484 */
485 if ((lmb->flags & DRCONF_MEM_RESERVED) ||
486 !(lmb->flags & DRCONF_MEM_ASSIGNED))
487 return;
488
489 if (*usm)
490 is_kexec_kdump = 1;
491
492 if (is_kexec_kdump) {
493 /*
494 * For each memblock in ibm,dynamic-memory, a
495 * corresponding entry in linux,drconf-usable-memory
496 * property contains a counter 'p' followed by 'p'
497 * (base, size) duple. Now read the counter from
498 * linux,drconf-usable-memory property
499 */
500 rngs = dt_mem_next_cell(dt_root_size_cells, usm);
501 if (!rngs) /* there are no (base, size) duple */
502 return;
503 }
504
505 do {
506 if (is_kexec_kdump) {
507 base = dt_mem_next_cell(dt_root_addr_cells, usm);
508 size = dt_mem_next_cell(dt_root_size_cells, usm);
509 }
510
511 if (iommu_is_off) {
512 if (base >= 0x80000000ul)
513 continue;
514 if ((base + size) > 0x80000000ul)
515 size = 0x80000000ul - base;
516 }
517
518 DBG("Adding: %llx -> %llx\n", base, size);
519 if (validate_mem_limit(base, &size))
520 memblock_add(base, size);
521 } while (--rngs);
522}
523#endif /* CONFIG_PPC_PSERIES */
524
525static int __init early_init_dt_scan_memory_ppc(unsigned long node,
526 const char *uname,
527 int depth, void *data)
528{
529#ifdef CONFIG_PPC_PSERIES
530 if (depth == 1 &&
531 strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) {
532 walk_drmem_lmbs_early(node, early_init_drmem_lmb);
533 return 0;
534 }
535#endif
536
537 return early_init_dt_scan_memory(node, uname, depth, data);
538}
539
540/*
541 * For a relocatable kernel, we need to get the memstart_addr first,
542 * then use it to calculate the virtual kernel start address. This has
543 * to happen at a very early stage (before machine_init). In this case,
544 * we just want to get the memstart_address and would not like to mess the
545 * memblock at this stage. So introduce a variable to skip the memblock_add()
546 * for this reason.
547 */
548#ifdef CONFIG_RELOCATABLE
549static int add_mem_to_memblock = 1;
550#else
551#define add_mem_to_memblock 1
552#endif
553
554void __init early_init_dt_add_memory_arch(u64 base, u64 size)
555{
556#ifdef CONFIG_PPC64
557 if (iommu_is_off) {
558 if (base >= 0x80000000ul)
559 return;
560 if ((base + size) > 0x80000000ul)
561 size = 0x80000000ul - base;
562 }
563#endif
564 /* Keep track of the beginning of memory -and- the size of
565 * the very first block in the device-tree as it represents
566 * the RMA on ppc64 server
567 */
568 if (base < memstart_addr) {
569 memstart_addr = base;
570 first_memblock_size = size;
571 }
572
573 /* Add the chunk to the MEMBLOCK list */
574 if (add_mem_to_memblock) {
575 if (validate_mem_limit(base, &size))
576 memblock_add(base, size);
577 }
578}
579
580static void __init early_reserve_mem_dt(void)
581{
582 unsigned long i, dt_root;
583 int len;
584 const __be32 *prop;
585
586 early_init_fdt_reserve_self();
587 early_init_fdt_scan_reserved_mem();
588
589 dt_root = of_get_flat_dt_root();
590
591 prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
592
593 if (!prop)
594 return;
595
596 DBG("Found new-style reserved-ranges\n");
597
598 /* Each reserved range is an (address,size) pair, 2 cells each,
599 * totalling 4 cells per range. */
600 for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
601 u64 base, size;
602
603 base = of_read_number(prop + (i * 4) + 0, 2);
604 size = of_read_number(prop + (i * 4) + 2, 2);
605
606 if (size) {
607 DBG("reserving: %llx -> %llx\n", base, size);
608 memblock_reserve(base, size);
609 }
610 }
611}
612
613static void __init early_reserve_mem(void)
614{
615 __be64 *reserve_map;
616
617 reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
618 fdt_off_mem_rsvmap(initial_boot_params));
619
620 /* Look for the new "reserved-regions" property in the DT */
621 early_reserve_mem_dt();
622
623#ifdef CONFIG_BLK_DEV_INITRD
624 /* Then reserve the initrd, if any */
625 if (initrd_start && (initrd_end > initrd_start)) {
626 memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
627 _ALIGN_UP(initrd_end, PAGE_SIZE) -
628 _ALIGN_DOWN(initrd_start, PAGE_SIZE));
629 }
630#endif /* CONFIG_BLK_DEV_INITRD */
631
632#ifdef CONFIG_PPC32
633 /*
634 * Handle the case where we might be booting from an old kexec
635 * image that setup the mem_rsvmap as pairs of 32-bit values
636 */
637 if (be64_to_cpup(reserve_map) > 0xffffffffull) {
638 u32 base_32, size_32;
639 __be32 *reserve_map_32 = (__be32 *)reserve_map;
640
641 DBG("Found old 32-bit reserve map\n");
642
643 while (1) {
644 base_32 = be32_to_cpup(reserve_map_32++);
645 size_32 = be32_to_cpup(reserve_map_32++);
646 if (size_32 == 0)
647 break;
648 DBG("reserving: %x -> %x\n", base_32, size_32);
649 memblock_reserve(base_32, size_32);
650 }
651 return;
652 }
653#endif
654}
655
656#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
657static bool tm_disabled __initdata;
658
659static int __init parse_ppc_tm(char *str)
660{
661 bool res;
662
663 if (kstrtobool(str, &res))
664 return -EINVAL;
665
666 tm_disabled = !res;
667
668 return 0;
669}
670early_param("ppc_tm", parse_ppc_tm);
671
672static void __init tm_init(void)
673{
674 if (tm_disabled) {
675 pr_info("Disabling hardware transactional memory (HTM)\n");
676 cur_cpu_spec->cpu_user_features2 &=
677 ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM);
678 cur_cpu_spec->cpu_features &= ~CPU_FTR_TM;
679 return;
680 }
681
682 pnv_tm_init();
683}
684#else
685static void tm_init(void) { }
686#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
687
688void __init early_init_devtree(void *params)
689{
690 phys_addr_t limit;
691
692 DBG(" -> early_init_devtree(%px)\n", params);
693
694 /* Too early to BUG_ON(), do it by hand */
695 if (!early_init_dt_verify(params))
696 panic("BUG: Failed verifying flat device tree, bad version?");
697
698#ifdef CONFIG_PPC_RTAS
699 /* Some machines might need RTAS info for debugging, grab it now. */
700 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
701#endif
702
703#ifdef CONFIG_PPC_POWERNV
704 /* Some machines might need OPAL info for debugging, grab it now. */
705 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
706
707 /* Scan tree for ultravisor feature */
708 of_scan_flat_dt(early_init_dt_scan_ultravisor, NULL);
709#endif
710
711#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
712 /* scan tree to see if dump is active during last boot */
713 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
714#endif
715
716 /* Retrieve various informations from the /chosen node of the
717 * device-tree, including the platform type, initrd location and
718 * size, TCE reserve, and more ...
719 */
720 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
721
722 /* Scan memory nodes and rebuild MEMBLOCKs */
723 of_scan_flat_dt(early_init_dt_scan_root, NULL);
724 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
725
726 parse_early_param();
727
728 /* make sure we've parsed cmdline for mem= before this */
729 if (memory_limit)
730 first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
731 setup_initial_memory_limit(memstart_addr, first_memblock_size);
732 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
733 memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
734 /* If relocatable, reserve first 32k for interrupt vectors etc. */
735 if (PHYSICAL_START > MEMORY_START)
736 memblock_reserve(MEMORY_START, 0x8000);
737 reserve_kdump_trampoline();
738#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
739 /*
740 * If we fail to reserve memory for firmware-assisted dump then
741 * fallback to kexec based kdump.
742 */
743 if (fadump_reserve_mem() == 0)
744#endif
745 reserve_crashkernel();
746 early_reserve_mem();
747
748 /* Ensure that total memory size is page-aligned. */
749 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
750 memblock_enforce_memory_limit(limit);
751
752 memblock_allow_resize();
753 memblock_dump_all();
754
755 DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
756
757 /* We may need to relocate the flat tree, do it now.
758 * FIXME .. and the initrd too? */
759 move_device_tree();
760
761 allocate_paca_ptrs();
762
763 DBG("Scanning CPUs ...\n");
764
765 dt_cpu_ftrs_scan();
766
767 /* Retrieve CPU related informations from the flat tree
768 * (altivec support, boot CPU ID, ...)
769 */
770 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
771 if (boot_cpuid < 0) {
772 printk("Failed to identify boot CPU !\n");
773 BUG();
774 }
775
776#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
777 /* We'll later wait for secondaries to check in; there are
778 * NCPUS-1 non-boot CPUs :-)
779 */
780 spinning_secondaries = boot_cpu_count - 1;
781#endif
782
783 mmu_early_init_devtree();
784
785#ifdef CONFIG_PPC_POWERNV
786 /* Scan and build the list of machine check recoverable ranges */
787 of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
788#endif
789 epapr_paravirt_early_init();
790
791 /* Now try to figure out if we are running on LPAR and so on */
792 pseries_probe_fw_features();
793
794#ifdef CONFIG_PPC_PS3
795 /* Identify PS3 firmware */
796 if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3"))
797 powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
798#endif
799
800 tm_init();
801
802 DBG(" <- early_init_devtree()\n");
803}
804
805#ifdef CONFIG_RELOCATABLE
806/*
807 * This function run before early_init_devtree, so we have to init
808 * initial_boot_params.
809 */
810void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
811{
812 /* Setup flat device-tree pointer */
813 initial_boot_params = params;
814
815 /*
816 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
817 * mess the memblock.
818 */
819 add_mem_to_memblock = 0;
820 of_scan_flat_dt(early_init_dt_scan_root, NULL);
821 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
822 add_mem_to_memblock = 1;
823
824 if (size)
825 *size = first_memblock_size;
826}
827#endif
828
829/*******
830 *
831 * New implementation of the OF "find" APIs, return a refcounted
832 * object, call of_node_put() when done. The device tree and list
833 * are protected by a rw_lock.
834 *
835 * Note that property management will need some locking as well,
836 * this isn't dealt with yet.
837 *
838 *******/
839
840/**
841 * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
842 * @np: device node of the device
843 *
844 * This looks for a property "ibm,chip-id" in the node or any
845 * of its parents and returns its content, or -1 if it cannot
846 * be found.
847 */
848int of_get_ibm_chip_id(struct device_node *np)
849{
850 of_node_get(np);
851 while (np) {
852 u32 chip_id;
853
854 /*
855 * Skiboot may produce memory nodes that contain more than one
856 * cell in chip-id, we only read the first one here.
857 */
858 if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
859 of_node_put(np);
860 return chip_id;
861 }
862
863 np = of_get_next_parent(np);
864 }
865 return -1;
866}
867EXPORT_SYMBOL(of_get_ibm_chip_id);
868
869/**
870 * cpu_to_chip_id - Return the cpus chip-id
871 * @cpu: The logical cpu number.
872 *
873 * Return the value of the ibm,chip-id property corresponding to the given
874 * logical cpu number. If the chip-id can not be found, returns -1.
875 */
876int cpu_to_chip_id(int cpu)
877{
878 struct device_node *np;
879
880 np = of_get_cpu_node(cpu, NULL);
881 if (!np)
882 return -1;
883
884 of_node_put(np);
885 return of_get_ibm_chip_id(np);
886}
887EXPORT_SYMBOL(cpu_to_chip_id);
888
889bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
890{
891#ifdef CONFIG_SMP
892 /*
893 * Early firmware scanning must use this rather than
894 * get_hard_smp_processor_id because we don't have pacas allocated
895 * until memory topology is discovered.
896 */
897 if (cpu_to_phys_id != NULL)
898 return (int)phys_id == cpu_to_phys_id[cpu];
899#endif
900
901 return (int)phys_id == get_hard_smp_processor_id(cpu);
902}