Linux Audio

Check our new training course

Loading...
v4.6
 
  1/*
  2 * Copyright (C) 2013 Imagination Technologies
  3 * Author: Paul Burton <paul.burton@imgtec.com>
  4 *
  5 * This program is free software; you can redistribute it and/or modify it
  6 * under the terms of the GNU General Public License as published by the
  7 * Free Software Foundation;  either version 2 of the  License, or (at your
  8 * option) any later version.
  9 */
 10
 11#include <asm/addrspace.h>
 12#include <asm/asm.h>
 13#include <asm/asm-offsets.h>
 14#include <asm/asmmacro.h>
 15#include <asm/cacheops.h>
 16#include <asm/eva.h>
 17#include <asm/mipsregs.h>
 18#include <asm/mipsmtregs.h>
 19#include <asm/pm.h>
 20
 
 21#define GCR_CL_COHERENCE_OFS	0x2008
 22#define GCR_CL_ID_OFS		0x2028
 23
 
 
 
 24.extern mips_cm_base
 25
 26.set noreorder
 27
 28#ifdef CONFIG_64BIT
 29# define STATUS_BITDEPS		ST0_KX
 30#else
 31# define STATUS_BITDEPS		0
 32#endif
 33
 34#ifdef CONFIG_MIPS_CPS_NS16550
 35
 36#define DUMP_EXCEP(name)		\
 37	PTR_LA	a0, 8f;			\
 38	jal	mips_cps_bev_dump;	\
 39	 nop;				\
 40	TEXT(name)
 41
 42#else /* !CONFIG_MIPS_CPS_NS16550 */
 43
 44#define DUMP_EXCEP(name)
 45
 46#endif /* !CONFIG_MIPS_CPS_NS16550 */
 47
 48	/*
 49	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
 50	 * MT is not supported then branch to nomt.
 51	 */
 52	.macro	has_mt	dest, nomt
 53	mfc0	\dest, CP0_CONFIG, 1
 54	bgez	\dest, \nomt
 55	 mfc0	\dest, CP0_CONFIG, 2
 56	bgez	\dest, \nomt
 57	 mfc0	\dest, CP0_CONFIG, 3
 58	andi	\dest, \dest, MIPS_CONF3_MT
 59	beqz	\dest, \nomt
 60	 nop
 61	.endm
 62
 63.section .text.cps-vec
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 64.balign 0x1000
 65
 66LEAF(mips_cps_core_entry)
 67	/*
 68	 * These first 4 bytes will be patched by cps_smp_setup to load the
 69	 * CCA to use into register s0.
 70	 */
 71	.word	0
 72
 73	/* Check whether we're here due to an NMI */
 74	mfc0	k0, CP0_STATUS
 75	and	k0, k0, ST0_NMI
 76	beqz	k0, not_nmi
 77	 nop
 78
 79	/* This is an NMI */
 80	PTR_LA	k0, nmi_handler
 81	jr	k0
 82	 nop
 83
 84not_nmi:
 85	/* Setup Cause */
 86	li	t0, CAUSEF_IV
 87	mtc0	t0, CP0_CAUSE
 88
 89	/* Setup Status */
 90	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
 91	mtc0	t0, CP0_STATUS
 92
 93	/*
 94	 * Clear the bits used to index the caches. Note that the architecture
 95	 * dictates that writing to any of TagLo or TagHi selects 0 or 2 should
 96	 * be valid for all MIPS32 CPUs, even those for which said writes are
 97	 * unnecessary.
 98	 */
 99	mtc0	zero, CP0_TAGLO, 0
100	mtc0	zero, CP0_TAGHI, 0
101	mtc0	zero, CP0_TAGLO, 2
102	mtc0	zero, CP0_TAGHI, 2
103	ehb
104
105	/* Primary cache configuration is indicated by Config1 */
106	mfc0	v0, CP0_CONFIG, 1
107
108	/* Detect I-cache line size */
109	_EXT	t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ
110	beqz	t0, icache_done
111	 li	t1, 2
112	sllv	t0, t1, t0
113
114	/* Detect I-cache size */
115	_EXT	t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ
116	xori	t2, t1, 0x7
117	beqz	t2, 1f
118	 li	t3, 32
119	addiu	t1, t1, 1
120	sllv	t1, t3, t1
1211:	/* At this point t1 == I-cache sets per way */
122	_EXT	t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ
123	addiu	t2, t2, 1
124	mul	t1, t1, t0
125	mul	t1, t1, t2
126
127	li	a0, CKSEG0
128	PTR_ADD	a1, a0, t1
1291:	cache	Index_Store_Tag_I, 0(a0)
130	PTR_ADD	a0, a0, t0
131	bne	a0, a1, 1b
132	 nop
133icache_done:
134
135	/* Detect D-cache line size */
136	_EXT	t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ
137	beqz	t0, dcache_done
138	 li	t1, 2
139	sllv	t0, t1, t0
140
141	/* Detect D-cache size */
142	_EXT	t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ
143	xori	t2, t1, 0x7
144	beqz	t2, 1f
145	 li	t3, 32
146	addiu	t1, t1, 1
147	sllv	t1, t3, t1
1481:	/* At this point t1 == D-cache sets per way */
149	_EXT	t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ
150	addiu	t2, t2, 1
151	mul	t1, t1, t0
152	mul	t1, t1, t2
153
154	li	a0, CKSEG0
155	PTR_ADDU a1, a0, t1
156	PTR_SUBU a1, a1, t0
1571:	cache	Index_Store_Tag_D, 0(a0)
158	bne	a0, a1, 1b
159	 PTR_ADD a0, a0, t0
160dcache_done:
161
162	/* Set Kseg0 CCA to that in s0 */
163	mfc0	t0, CP0_CONFIG
164	ori	t0, 0x7
165	xori	t0, 0x7
166	or	t0, t0, s0
167	mtc0	t0, CP0_CONFIG
168	ehb
169
170	/* Calculate an uncached address for the CM GCRs */
171	MFC0	v1, CP0_CMGCRBASE
172	PTR_SLL	v1, v1, 4
173	PTR_LI	t0, UNCAC_BASE
174	PTR_ADDU v1, v1, t0
175
176	/* Enter the coherent domain */
177	li	t0, 0xff
178	sw	t0, GCR_CL_COHERENCE_OFS(v1)
179	ehb
180
181	/* Jump to kseg0 */
182	PTR_LA	t0, 1f
183	jr	t0
184	 nop
185
186	/*
187	 * We're up, cached & coherent. Perform any further required core-level
188	 * initialisation.
189	 */
1901:	jal	mips_cps_core_init
 
 
 
 
 
 
 
191	 nop
192
193	/* Do any EVA initialization if necessary */
194	eva_init
 
195
196	/*
197	 * Boot any other VPEs within this core that should be online, and
198	 * deactivate this VPE if it should be offline.
199	 */
 
200	jal	mips_cps_boot_vpes
201	 nop
202
203	/* Off we go! */
204	PTR_L	t1, VPEBOOTCFG_PC(v0)
205	PTR_L	gp, VPEBOOTCFG_GP(v0)
206	PTR_L	sp, VPEBOOTCFG_SP(v0)
207	jr	t1
208	 nop
209	END(mips_cps_core_entry)
210
211.org 0x200
212LEAF(excep_tlbfill)
213	DUMP_EXCEP("TLB Fill")
214	b	.
215	 nop
216	END(excep_tlbfill)
217
218.org 0x280
219LEAF(excep_xtlbfill)
220	DUMP_EXCEP("XTLB Fill")
221	b	.
222	 nop
223	END(excep_xtlbfill)
224
225.org 0x300
226LEAF(excep_cache)
227	DUMP_EXCEP("Cache")
228	b	.
229	 nop
230	END(excep_cache)
231
232.org 0x380
233LEAF(excep_genex)
234	DUMP_EXCEP("General")
235	b	.
236	 nop
237	END(excep_genex)
238
239.org 0x400
240LEAF(excep_intex)
241	DUMP_EXCEP("Interrupt")
242	b	.
243	 nop
244	END(excep_intex)
245
246.org 0x480
247LEAF(excep_ejtag)
248	DUMP_EXCEP("EJTAG")
249	PTR_LA	k0, ejtag_debug_handler
250	jr	k0
251	 nop
252	END(excep_ejtag)
253
254LEAF(mips_cps_core_init)
255#ifdef CONFIG_MIPS_MT_SMP
256	/* Check that the core implements the MT ASE */
257	has_mt	t0, 3f
258
259	.set	push
 
260	.set	mt
261
262	/* Only allow 1 TC per VPE to execute... */
263	dmt
264
265	/* ...and for the moment only 1 VPE */
266	dvpe
267	PTR_LA	t1, 1f
268	jr.hb	t1
269	 nop
270
271	/* Enter VPE configuration state */
2721:	mfc0	t0, CP0_MVPCONTROL
273	ori	t0, t0, MVPCONTROL_VPC
274	mtc0	t0, CP0_MVPCONTROL
275
276	/* Retrieve the number of VPEs within the core */
277	mfc0	t0, CP0_MVPCONF0
278	srl	t0, t0, MVPCONF0_PVPE_SHIFT
279	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
280	addiu	ta3, t0, 1
281
282	/* If there's only 1, we're done */
283	beqz	t0, 2f
284	 nop
285
286	/* Loop through each VPE within this core */
287	li	ta1, 1
288
2891:	/* Operate on the appropriate TC */
290	mtc0	ta1, CP0_VPECONTROL
291	ehb
292
293	/* Bind TC to VPE (1:1 TC:VPE mapping) */
294	mttc0	ta1, CP0_TCBIND
295
296	/* Set exclusive TC, non-active, master */
297	li	t0, VPECONF0_MVP
298	sll	t1, ta1, VPECONF0_XTC_SHIFT
299	or	t0, t0, t1
300	mttc0	t0, CP0_VPECONF0
301
302	/* Set TC non-active, non-allocatable */
303	mttc0	zero, CP0_TCSTATUS
304
305	/* Set TC halted */
306	li	t0, TCHALT_H
307	mttc0	t0, CP0_TCHALT
308
309	/* Next VPE */
310	addiu	ta1, ta1, 1
311	slt	t0, ta1, ta3
312	bnez	t0, 1b
313	 nop
314
315	/* Leave VPE configuration state */
3162:	mfc0	t0, CP0_MVPCONTROL
317	xori	t0, t0, MVPCONTROL_VPC
318	mtc0	t0, CP0_MVPCONTROL
319
3203:	.set	pop
321#endif
322	jr	ra
323	 nop
324	END(mips_cps_core_init)
325
326LEAF(mips_cps_boot_vpes)
327	/* Retrieve CM base address */
328	PTR_LA	t0, mips_cm_base
329	PTR_L	t0, 0(t0)
330
 
 
331	/* Calculate a pointer to this cores struct core_boot_config */
 
332	lw	t0, GCR_CL_ID_OFS(t0)
333	li	t1, COREBOOTCFG_SIZE
334	mul	t0, t0, t1
335	PTR_LA	t1, mips_cps_core_bootcfg
336	PTR_L	t1, 0(t1)
337	PTR_ADDU t0, t0, t1
338
339	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
340	li	t9, 0
341#ifdef CONFIG_MIPS_MT_SMP
 
 
 
 
 
 
 
 
 
 
342	has_mt	ta2, 1f
343
344	/* Find the number of VPEs present in the core */
345	mfc0	t1, CP0_MVPCONF0
346	srl	t1, t1, MVPCONF0_PVPE_SHIFT
347	andi	t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
348	addiu	t1, t1, 1
349
350	/* Calculate a mask for the VPE ID from EBase.CPUNum */
351	clz	t1, t1
352	li	t2, 31
353	subu	t1, t2, t1
354	li	t2, 1
355	sll	t1, t2, t1
356	addiu	t1, t1, -1
357
358	/* Retrieve the VPE ID from EBase.CPUNum */
359	mfc0	t9, $15, 1
360	and	t9, t9, t1
361#endif
362
3631:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
364	li	t1, VPEBOOTCFG_SIZE
365	mul	v0, t9, t1
366	PTR_L	ta3, COREBOOTCFG_VPECONFIG(t0)
367	PTR_ADDU v0, v0, ta3
368
369#ifdef CONFIG_MIPS_MT_SMP
370
371	/* If the core doesn't support MT then return */
372	bnez	ta2, 1f
373	 nop
374	jr	ra
375	 nop
 
 
 
 
 
376
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
377	.set	push
 
378	.set	mt
379
3801:	/* Enter VPE configuration state */
381	dvpe
 
 
382	PTR_LA	t1, 1f
383	jr.hb	t1
384	 nop
3851:	mfc0	t1, CP0_MVPCONTROL
386	ori	t1, t1, MVPCONTROL_VPC
387	mtc0	t1, CP0_MVPCONTROL
388	ehb
389
390	/* Loop through each VPE */
391	PTR_L	ta2, COREBOOTCFG_VPEMASK(t0)
392	move	t8, ta2
393	li	ta1, 0
394
395	/* Check whether the VPE should be running. If not, skip it */
3961:	andi	t0, ta2, 1
397	beqz	t0, 2f
398	 nop
399
400	/* Operate on the appropriate TC */
401	mfc0	t0, CP0_VPECONTROL
402	ori	t0, t0, VPECONTROL_TARGTC
403	xori	t0, t0, VPECONTROL_TARGTC
404	or	t0, t0, ta1
405	mtc0	t0, CP0_VPECONTROL
406	ehb
407
 
 
 
 
408	/* Skip the VPE if its TC is not halted */
409	mftc0	t0, CP0_TCHALT
410	beqz	t0, 2f
411	 nop
412
413	/* Calculate a pointer to the VPEs struct vpe_boot_config */
414	li	t0, VPEBOOTCFG_SIZE
415	mul	t0, t0, ta1
416	addu	t0, t0, ta3
417
418	/* Set the TC restart PC */
419	lw	t1, VPEBOOTCFG_PC(t0)
420	mttc0	t1, CP0_TCRESTART
421
422	/* Set the TC stack pointer */
423	lw	t1, VPEBOOTCFG_SP(t0)
424	mttgpr	t1, sp
425
426	/* Set the TC global pointer */
427	lw	t1, VPEBOOTCFG_GP(t0)
428	mttgpr	t1, gp
429
430	/* Copy config from this VPE */
431	mfc0	t0, CP0_CONFIG
432	mttc0	t0, CP0_CONFIG
433
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
434	/* Ensure no software interrupts are pending */
435	mttc0	zero, CP0_CAUSE
436	mttc0	zero, CP0_STATUS
437
438	/* Set TC active, not interrupt exempt */
439	mftc0	t0, CP0_TCSTATUS
440	li	t1, ~TCSTATUS_IXMT
441	and	t0, t0, t1
442	ori	t0, t0, TCSTATUS_A
443	mttc0	t0, CP0_TCSTATUS
444
445	/* Clear the TC halt bit */
446	mttc0	zero, CP0_TCHALT
447
448	/* Set VPE active */
449	mftc0	t0, CP0_VPECONF0
450	ori	t0, t0, VPECONF0_VPA
451	mttc0	t0, CP0_VPECONF0
452
453	/* Next VPE */
4542:	srl	ta2, ta2, 1
455	addiu	ta1, ta1, 1
456	bnez	ta2, 1b
457	 nop
458
459	/* Leave VPE configuration state */
460	mfc0	t1, CP0_MVPCONTROL
461	xori	t1, t1, MVPCONTROL_VPC
462	mtc0	t1, CP0_MVPCONTROL
463	ehb
464	evpe
465
 
 
466	/* Check whether this VPE is meant to be running */
467	li	t0, 1
468	sll	t0, t0, t9
469	and	t0, t0, t8
470	bnez	t0, 2f
471	 nop
472
473	/* This VPE should be offline, halt the TC */
474	li	t0, TCHALT_H
475	mtc0	t0, CP0_TCHALT
476	PTR_LA	t0, 1f
4771:	jr.hb	t0
478	 nop
479
4802:	.set	pop
481
482#endif /* CONFIG_MIPS_MT_SMP */
483
484	/* Return */
485	jr	ra
486	 nop
487	END(mips_cps_boot_vpes)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
488
489#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
490
491	/* Calculate a pointer to this CPUs struct mips_static_suspend_state */
492	.macro	psstate	dest
493	.set	push
494	.set	noat
495	lw	$1, TI_CPU(gp)
496	sll	$1, $1, LONGLOG
497	PTR_LA	\dest, __per_cpu_offset
498	addu	$1, $1, \dest
499	lw	$1, 0($1)
500	PTR_LA	\dest, cps_cpu_state
501	addu	\dest, \dest, $1
502	.set	pop
503	.endm
504
505LEAF(mips_cps_pm_save)
506	/* Save CPU state */
507	SUSPEND_SAVE_REGS
508	psstate	t1
509	SUSPEND_SAVE_STATIC
510	jr	v0
511	 nop
512	END(mips_cps_pm_save)
513
514LEAF(mips_cps_pm_restore)
515	/* Restore CPU state */
516	psstate	t1
517	RESUME_RESTORE_STATIC
518	RESUME_RESTORE_REGS_RETURN
519	END(mips_cps_pm_restore)
520
521#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */
v6.2
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 * Copyright (C) 2013 Imagination Technologies
  4 * Author: Paul Burton <paul.burton@mips.com>
 
 
 
 
 
  5 */
  6
  7#include <asm/addrspace.h>
  8#include <asm/asm.h>
  9#include <asm/asm-offsets.h>
 10#include <asm/asmmacro.h>
 11#include <asm/cacheops.h>
 12#include <asm/eva.h>
 13#include <asm/mipsregs.h>
 14#include <asm/mipsmtregs.h>
 15#include <asm/pm.h>
 16
 17#define GCR_CPC_BASE_OFS	0x0088
 18#define GCR_CL_COHERENCE_OFS	0x2008
 19#define GCR_CL_ID_OFS		0x2028
 20
 21#define CPC_CL_VC_STOP_OFS	0x2020
 22#define CPC_CL_VC_RUN_OFS	0x2028
 23
 24.extern mips_cm_base
 25
 26.set noreorder
 27
 28#ifdef CONFIG_64BIT
 29# define STATUS_BITDEPS		ST0_KX
 30#else
 31# define STATUS_BITDEPS		0
 32#endif
 33
 34#ifdef CONFIG_MIPS_CPS_NS16550
 35
 36#define DUMP_EXCEP(name)		\
 37	PTR_LA	a0, 8f;			\
 38	jal	mips_cps_bev_dump;	\
 39	 nop;				\
 40	TEXT(name)
 41
 42#else /* !CONFIG_MIPS_CPS_NS16550 */
 43
 44#define DUMP_EXCEP(name)
 45
 46#endif /* !CONFIG_MIPS_CPS_NS16550 */
 47
 48	/*
 49	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
 50	 * MT is not supported then branch to nomt.
 51	 */
 52	.macro	has_mt	dest, nomt
 53	mfc0	\dest, CP0_CONFIG, 1
 54	bgez	\dest, \nomt
 55	 mfc0	\dest, CP0_CONFIG, 2
 56	bgez	\dest, \nomt
 57	 mfc0	\dest, CP0_CONFIG, 3
 58	andi	\dest, \dest, MIPS_CONF3_MT
 59	beqz	\dest, \nomt
 60	 nop
 61	.endm
 62
 63	/*
 64	 * Set dest to non-zero if the core supports MIPSr6 multithreading
 65	 * (ie. VPs), else zero. If MIPSr6 multithreading is not supported then
 66	 * branch to nomt.
 67	 */
 68	.macro	has_vp	dest, nomt
 69	mfc0	\dest, CP0_CONFIG, 1
 70	bgez	\dest, \nomt
 71	 mfc0	\dest, CP0_CONFIG, 2
 72	bgez	\dest, \nomt
 73	 mfc0	\dest, CP0_CONFIG, 3
 74	bgez	\dest, \nomt
 75	 mfc0	\dest, CP0_CONFIG, 4
 76	bgez	\dest, \nomt
 77	 mfc0	\dest, CP0_CONFIG, 5
 78	andi	\dest, \dest, MIPS_CONF5_VP
 79	beqz	\dest, \nomt
 80	 nop
 81	.endm
 82
 83	/* Calculate an uncached address for the CM GCRs */
 84	.macro	cmgcrb	dest
 85	.set	push
 86	.set	noat
 87	MFC0	$1, CP0_CMGCRBASE
 88	PTR_SLL	$1, $1, 4
 89	PTR_LI	\dest, UNCAC_BASE
 90	PTR_ADDU \dest, \dest, $1
 91	.set	pop
 92	.endm
 93
 94.balign 0x1000
 95
 96LEAF(mips_cps_core_entry)
 97	/*
 98	 * These first 4 bytes will be patched by cps_smp_setup to load the
 99	 * CCA to use into register s0.
100	 */
101	.word	0
102
103	/* Check whether we're here due to an NMI */
104	mfc0	k0, CP0_STATUS
105	and	k0, k0, ST0_NMI
106	beqz	k0, not_nmi
107	 nop
108
109	/* This is an NMI */
110	PTR_LA	k0, nmi_handler
111	jr	k0
112	 nop
113
114not_nmi:
115	/* Setup Cause */
116	li	t0, CAUSEF_IV
117	mtc0	t0, CP0_CAUSE
118
119	/* Setup Status */
120	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
121	mtc0	t0, CP0_STATUS
122
123	/* Skip cache & coherence setup if we're already coherent */
124	cmgcrb	v1
125	lw	s7, GCR_CL_COHERENCE_OFS(v1)
126	bnez	s7, 1f
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
127	 nop
 
 
 
 
 
 
 
128
129	/* Initialize the L1 caches */
130	jal	mips_cps_cache_init
131	 nop
 
 
 
 
 
 
 
 
 
132
133	/* Enter the coherent domain */
134	li	t0, 0xff
135	sw	t0, GCR_CL_COHERENCE_OFS(v1)
136	ehb
 
 
 
137
138	/* Set Kseg0 CCA to that in s0 */
1391:	mfc0	t0, CP0_CONFIG
140	ori	t0, 0x7
141	xori	t0, 0x7
142	or	t0, t0, s0
143	mtc0	t0, CP0_CONFIG
144	ehb
145
 
 
 
 
 
 
 
 
 
 
 
146	/* Jump to kseg0 */
147	PTR_LA	t0, 1f
148	jr	t0
149	 nop
150
151	/*
152	 * We're up, cached & coherent. Perform any EVA initialization necessary
153	 * before we access memory.
154	 */
1551:	eva_init
156
157	/* Retrieve boot configuration pointers */
158	jal	mips_cps_get_bootcfg
159	 nop
160
161	/* Skip core-level init if we started up coherent */
162	bnez	s7, 1f
163	 nop
164
165	/* Perform any further required core-level initialisation */
166	jal	mips_cps_core_init
167	 nop
168
169	/*
170	 * Boot any other VPEs within this core that should be online, and
171	 * deactivate this VPE if it should be offline.
172	 */
173	move	a1, t9
174	jal	mips_cps_boot_vpes
175	 move	a0, v0
176
177	/* Off we go! */
1781:	PTR_L	t1, VPEBOOTCFG_PC(v1)
179	PTR_L	gp, VPEBOOTCFG_GP(v1)
180	PTR_L	sp, VPEBOOTCFG_SP(v1)
181	jr	t1
182	 nop
183	END(mips_cps_core_entry)
184
185.org 0x200
186LEAF(excep_tlbfill)
187	DUMP_EXCEP("TLB Fill")
188	b	.
189	 nop
190	END(excep_tlbfill)
191
192.org 0x280
193LEAF(excep_xtlbfill)
194	DUMP_EXCEP("XTLB Fill")
195	b	.
196	 nop
197	END(excep_xtlbfill)
198
199.org 0x300
200LEAF(excep_cache)
201	DUMP_EXCEP("Cache")
202	b	.
203	 nop
204	END(excep_cache)
205
206.org 0x380
207LEAF(excep_genex)
208	DUMP_EXCEP("General")
209	b	.
210	 nop
211	END(excep_genex)
212
213.org 0x400
214LEAF(excep_intex)
215	DUMP_EXCEP("Interrupt")
216	b	.
217	 nop
218	END(excep_intex)
219
220.org 0x480
221LEAF(excep_ejtag)
 
222	PTR_LA	k0, ejtag_debug_handler
223	jr	k0
224	 nop
225	END(excep_ejtag)
226
227LEAF(mips_cps_core_init)
228#ifdef CONFIG_MIPS_MT_SMP
229	/* Check that the core implements the MT ASE */
230	has_mt	t0, 3f
231
232	.set	push
233	.set	MIPS_ISA_LEVEL_RAW
234	.set	mt
235
236	/* Only allow 1 TC per VPE to execute... */
237	dmt
238
239	/* ...and for the moment only 1 VPE */
240	dvpe
241	PTR_LA	t1, 1f
242	jr.hb	t1
243	 nop
244
245	/* Enter VPE configuration state */
2461:	mfc0	t0, CP0_MVPCONTROL
247	ori	t0, t0, MVPCONTROL_VPC
248	mtc0	t0, CP0_MVPCONTROL
249
250	/* Retrieve the number of VPEs within the core */
251	mfc0	t0, CP0_MVPCONF0
252	srl	t0, t0, MVPCONF0_PVPE_SHIFT
253	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
254	addiu	ta3, t0, 1
255
256	/* If there's only 1, we're done */
257	beqz	t0, 2f
258	 nop
259
260	/* Loop through each VPE within this core */
261	li	ta1, 1
262
2631:	/* Operate on the appropriate TC */
264	mtc0	ta1, CP0_VPECONTROL
265	ehb
266
267	/* Bind TC to VPE (1:1 TC:VPE mapping) */
268	mttc0	ta1, CP0_TCBIND
269
270	/* Set exclusive TC, non-active, master */
271	li	t0, VPECONF0_MVP
272	sll	t1, ta1, VPECONF0_XTC_SHIFT
273	or	t0, t0, t1
274	mttc0	t0, CP0_VPECONF0
275
276	/* Set TC non-active, non-allocatable */
277	mttc0	zero, CP0_TCSTATUS
278
279	/* Set TC halted */
280	li	t0, TCHALT_H
281	mttc0	t0, CP0_TCHALT
282
283	/* Next VPE */
284	addiu	ta1, ta1, 1
285	slt	t0, ta1, ta3
286	bnez	t0, 1b
287	 nop
288
289	/* Leave VPE configuration state */
2902:	mfc0	t0, CP0_MVPCONTROL
291	xori	t0, t0, MVPCONTROL_VPC
292	mtc0	t0, CP0_MVPCONTROL
293
2943:	.set	pop
295#endif
296	jr	ra
297	 nop
298	END(mips_cps_core_init)
299
300/**
301 * mips_cps_get_bootcfg() - retrieve boot configuration pointers
302 *
303 * Returns: pointer to struct core_boot_config in v0, pointer to
304 *          struct vpe_boot_config in v1, VPE ID in t9
305 */
306LEAF(mips_cps_get_bootcfg)
307	/* Calculate a pointer to this cores struct core_boot_config */
308	cmgcrb	t0
309	lw	t0, GCR_CL_ID_OFS(t0)
310	li	t1, COREBOOTCFG_SIZE
311	mul	t0, t0, t1
312	PTR_LA	t1, mips_cps_core_bootcfg
313	PTR_L	t1, 0(t1)
314	PTR_ADDU v0, t0, t1
315
316	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
317	li	t9, 0
318#if defined(CONFIG_CPU_MIPSR6)
319	has_vp	ta2, 1f
320
321	/*
322	 * Assume non-contiguous numbering. Perhaps some day we'll need
323	 * to handle contiguous VP numbering, but no such systems yet
324	 * exist.
325	 */
326	mfc0	t9, CP0_GLOBALNUMBER
327	andi	t9, t9, MIPS_GLOBALNUMBER_VP
328#elif defined(CONFIG_MIPS_MT_SMP)
329	has_mt	ta2, 1f
330
331	/* Find the number of VPEs present in the core */
332	mfc0	t1, CP0_MVPCONF0
333	srl	t1, t1, MVPCONF0_PVPE_SHIFT
334	andi	t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
335	addiu	t1, t1, 1
336
337	/* Calculate a mask for the VPE ID from EBase.CPUNum */
338	clz	t1, t1
339	li	t2, 31
340	subu	t1, t2, t1
341	li	t2, 1
342	sll	t1, t2, t1
343	addiu	t1, t1, -1
344
345	/* Retrieve the VPE ID from EBase.CPUNum */
346	mfc0	t9, $15, 1
347	and	t9, t9, t1
348#endif
349
3501:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
351	li	t1, VPEBOOTCFG_SIZE
352	mul	v1, t9, t1
353	PTR_L	ta3, COREBOOTCFG_VPECONFIG(v0)
354	PTR_ADDU v1, v1, ta3
355
 
 
 
 
 
356	jr	ra
357	 nop
358	END(mips_cps_get_bootcfg)
359
360LEAF(mips_cps_boot_vpes)
361	lw	ta2, COREBOOTCFG_VPEMASK(a0)
362	PTR_L	ta3, COREBOOTCFG_VPECONFIG(a0)
363
364#if defined(CONFIG_CPU_MIPSR6)
365
366	has_vp	t0, 5f
367
368	/* Find base address of CPC */
369	cmgcrb	t3
370	PTR_L	t1, GCR_CPC_BASE_OFS(t3)
371	PTR_LI	t2, ~0x7fff
372	and	t1, t1, t2
373	PTR_LI	t2, UNCAC_BASE
374	PTR_ADD	t1, t1, t2
375
376	/* Start any other VPs that ought to be running */
377	PTR_S	ta2, CPC_CL_VC_RUN_OFS(t1)
378
379	/* Ensure this VP stops running if it shouldn't be */
380	not	ta2
381	PTR_S	ta2, CPC_CL_VC_STOP_OFS(t1)
382	ehb
383
384#elif defined(CONFIG_MIPS_MT)
385
386	/* If the core doesn't support MT then return */
387	has_mt	t0, 5f
388
389	/* Enter VPE configuration state */
390	.set	push
391	.set	MIPS_ISA_LEVEL_RAW
392	.set	mt
 
 
393	dvpe
394	.set	pop
395
396	PTR_LA	t1, 1f
397	jr.hb	t1
398	 nop
3991:	mfc0	t1, CP0_MVPCONTROL
400	ori	t1, t1, MVPCONTROL_VPC
401	mtc0	t1, CP0_MVPCONTROL
402	ehb
403
404	/* Loop through each VPE */
 
405	move	t8, ta2
406	li	ta1, 0
407
408	/* Check whether the VPE should be running. If not, skip it */
4091:	andi	t0, ta2, 1
410	beqz	t0, 2f
411	 nop
412
413	/* Operate on the appropriate TC */
414	mfc0	t0, CP0_VPECONTROL
415	ori	t0, t0, VPECONTROL_TARGTC
416	xori	t0, t0, VPECONTROL_TARGTC
417	or	t0, t0, ta1
418	mtc0	t0, CP0_VPECONTROL
419	ehb
420
421	.set	push
422	.set	MIPS_ISA_LEVEL_RAW
423	.set	mt
424
425	/* Skip the VPE if its TC is not halted */
426	mftc0	t0, CP0_TCHALT
427	beqz	t0, 2f
428	 nop
429
430	/* Calculate a pointer to the VPEs struct vpe_boot_config */
431	li	t0, VPEBOOTCFG_SIZE
432	mul	t0, t0, ta1
433	addu	t0, t0, ta3
434
435	/* Set the TC restart PC */
436	lw	t1, VPEBOOTCFG_PC(t0)
437	mttc0	t1, CP0_TCRESTART
438
439	/* Set the TC stack pointer */
440	lw	t1, VPEBOOTCFG_SP(t0)
441	mttgpr	t1, sp
442
443	/* Set the TC global pointer */
444	lw	t1, VPEBOOTCFG_GP(t0)
445	mttgpr	t1, gp
446
447	/* Copy config from this VPE */
448	mfc0	t0, CP0_CONFIG
449	mttc0	t0, CP0_CONFIG
450
451	/*
452	 * Copy the EVA config from this VPE if the CPU supports it.
453	 * CONFIG3 must exist to be running MT startup - just read it.
454	 */
455	mfc0	t0, CP0_CONFIG, 3
456	and	t0, t0, MIPS_CONF3_SC
457	beqz	t0, 3f
458	 nop
459	mfc0    t0, CP0_SEGCTL0
460	mttc0	t0, CP0_SEGCTL0
461	mfc0    t0, CP0_SEGCTL1
462	mttc0	t0, CP0_SEGCTL1
463	mfc0    t0, CP0_SEGCTL2
464	mttc0	t0, CP0_SEGCTL2
4653:
466	/* Ensure no software interrupts are pending */
467	mttc0	zero, CP0_CAUSE
468	mttc0	zero, CP0_STATUS
469
470	/* Set TC active, not interrupt exempt */
471	mftc0	t0, CP0_TCSTATUS
472	li	t1, ~TCSTATUS_IXMT
473	and	t0, t0, t1
474	ori	t0, t0, TCSTATUS_A
475	mttc0	t0, CP0_TCSTATUS
476
477	/* Clear the TC halt bit */
478	mttc0	zero, CP0_TCHALT
479
480	/* Set VPE active */
481	mftc0	t0, CP0_VPECONF0
482	ori	t0, t0, VPECONF0_VPA
483	mttc0	t0, CP0_VPECONF0
484
485	/* Next VPE */
4862:	srl	ta2, ta2, 1
487	addiu	ta1, ta1, 1
488	bnez	ta2, 1b
489	 nop
490
491	/* Leave VPE configuration state */
492	mfc0	t1, CP0_MVPCONTROL
493	xori	t1, t1, MVPCONTROL_VPC
494	mtc0	t1, CP0_MVPCONTROL
495	ehb
496	evpe
497
498	.set	pop
499
500	/* Check whether this VPE is meant to be running */
501	li	t0, 1
502	sll	t0, t0, a1
503	and	t0, t0, t8
504	bnez	t0, 2f
505	 nop
506
507	/* This VPE should be offline, halt the TC */
508	li	t0, TCHALT_H
509	mtc0	t0, CP0_TCHALT
510	PTR_LA	t0, 1f
5111:	jr.hb	t0
512	 nop
513
5142:
515
516#endif /* CONFIG_MIPS_MT_SMP */
517
518	/* Return */
5195:	jr	ra
520	 nop
521	END(mips_cps_boot_vpes)
522
523LEAF(mips_cps_cache_init)
524	/*
525	 * Clear the bits used to index the caches. Note that the architecture
526	 * dictates that writing to any of TagLo or TagHi selects 0 or 2 should
527	 * be valid for all MIPS32 CPUs, even those for which said writes are
528	 * unnecessary.
529	 */
530	mtc0	zero, CP0_TAGLO, 0
531	mtc0	zero, CP0_TAGHI, 0
532	mtc0	zero, CP0_TAGLO, 2
533	mtc0	zero, CP0_TAGHI, 2
534	ehb
535
536	/* Primary cache configuration is indicated by Config1 */
537	mfc0	v0, CP0_CONFIG, 1
538
539	/* Detect I-cache line size */
540	_EXT	t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ
541	beqz	t0, icache_done
542	 li	t1, 2
543	sllv	t0, t1, t0
544
545	/* Detect I-cache size */
546	_EXT	t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ
547	xori	t2, t1, 0x7
548	beqz	t2, 1f
549	 li	t3, 32
550	addiu	t1, t1, 1
551	sllv	t1, t3, t1
5521:	/* At this point t1 == I-cache sets per way */
553	_EXT	t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ
554	addiu	t2, t2, 1
555	mul	t1, t1, t0
556	mul	t1, t1, t2
557
558	li	a0, CKSEG0
559	PTR_ADD	a1, a0, t1
5601:	cache	Index_Store_Tag_I, 0(a0)
561	PTR_ADD	a0, a0, t0
562	bne	a0, a1, 1b
563	 nop
564icache_done:
565
566	/* Detect D-cache line size */
567	_EXT	t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ
568	beqz	t0, dcache_done
569	 li	t1, 2
570	sllv	t0, t1, t0
571
572	/* Detect D-cache size */
573	_EXT	t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ
574	xori	t2, t1, 0x7
575	beqz	t2, 1f
576	 li	t3, 32
577	addiu	t1, t1, 1
578	sllv	t1, t3, t1
5791:	/* At this point t1 == D-cache sets per way */
580	_EXT	t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ
581	addiu	t2, t2, 1
582	mul	t1, t1, t0
583	mul	t1, t1, t2
584
585	li	a0, CKSEG0
586	PTR_ADDU a1, a0, t1
587	PTR_SUBU a1, a1, t0
5881:	cache	Index_Store_Tag_D, 0(a0)
589	bne	a0, a1, 1b
590	 PTR_ADD a0, a0, t0
591dcache_done:
592
593	jr	ra
594	 nop
595	END(mips_cps_cache_init)
596
597#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
598
599	/* Calculate a pointer to this CPUs struct mips_static_suspend_state */
600	.macro	psstate	dest
601	.set	push
602	.set	noat
603	lw	$1, TI_CPU(gp)
604	sll	$1, $1, LONGLOG
605	PTR_LA	\dest, __per_cpu_offset
606	addu	$1, $1, \dest
607	lw	$1, 0($1)
608	PTR_LA	\dest, cps_cpu_state
609	addu	\dest, \dest, $1
610	.set	pop
611	.endm
612
613LEAF(mips_cps_pm_save)
614	/* Save CPU state */
615	SUSPEND_SAVE_REGS
616	psstate	t1
617	SUSPEND_SAVE_STATIC
618	jr	v0
619	 nop
620	END(mips_cps_pm_save)
621
622LEAF(mips_cps_pm_restore)
623	/* Restore CPU state */
624	psstate	t1
625	RESUME_RESTORE_STATIC
626	RESUME_RESTORE_REGS_RETURN
627	END(mips_cps_pm_restore)
628
629#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */