Linux Audio

Check our new training course

Loading...
v4.6
 
  1/*
  2 * Copyright (C) 2013 Imagination Technologies
  3 * Author: Paul Burton <paul.burton@imgtec.com>
  4 *
  5 * This program is free software; you can redistribute it and/or modify it
  6 * under the terms of the GNU General Public License as published by the
  7 * Free Software Foundation;  either version 2 of the  License, or (at your
  8 * option) any later version.
  9 */
 10
 11#include <asm/addrspace.h>
 12#include <asm/asm.h>
 13#include <asm/asm-offsets.h>
 14#include <asm/asmmacro.h>
 15#include <asm/cacheops.h>
 16#include <asm/eva.h>
 17#include <asm/mipsregs.h>
 18#include <asm/mipsmtregs.h>
 19#include <asm/pm.h>
 
 20
 
 21#define GCR_CL_COHERENCE_OFS	0x2008
 22#define GCR_CL_ID_OFS		0x2028
 23
 
 
 
 24.extern mips_cm_base
 25
 26.set noreorder
 27
 28#ifdef CONFIG_64BIT
 29# define STATUS_BITDEPS		ST0_KX
 30#else
 31# define STATUS_BITDEPS		0
 32#endif
 33
 34#ifdef CONFIG_MIPS_CPS_NS16550
 35
 36#define DUMP_EXCEP(name)		\
 37	PTR_LA	a0, 8f;			\
 38	jal	mips_cps_bev_dump;	\
 39	 nop;				\
 40	TEXT(name)
 41
 42#else /* !CONFIG_MIPS_CPS_NS16550 */
 43
 44#define DUMP_EXCEP(name)
 45
 46#endif /* !CONFIG_MIPS_CPS_NS16550 */
 47
 48	/*
 49	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
 50	 * MT is not supported then branch to nomt.
 51	 */
 52	.macro	has_mt	dest, nomt
 53	mfc0	\dest, CP0_CONFIG, 1
 54	bgez	\dest, \nomt
 55	 mfc0	\dest, CP0_CONFIG, 2
 56	bgez	\dest, \nomt
 57	 mfc0	\dest, CP0_CONFIG, 3
 58	andi	\dest, \dest, MIPS_CONF3_MT
 59	beqz	\dest, \nomt
 60	 nop
 61	.endm
 62
 63.section .text.cps-vec
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 64.balign 0x1000
 65
 66LEAF(mips_cps_core_entry)
 67	/*
 68	 * These first 4 bytes will be patched by cps_smp_setup to load the
 69	 * CCA to use into register s0.
 70	 */
 71	.word	0
 
 
 
 
 
 72
 73	/* Check whether we're here due to an NMI */
 74	mfc0	k0, CP0_STATUS
 75	and	k0, k0, ST0_NMI
 76	beqz	k0, not_nmi
 77	 nop
 78
 79	/* This is an NMI */
 80	PTR_LA	k0, nmi_handler
 81	jr	k0
 82	 nop
 83
 84not_nmi:
 85	/* Setup Cause */
 86	li	t0, CAUSEF_IV
 87	mtc0	t0, CP0_CAUSE
 88
 89	/* Setup Status */
 90	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
 91	mtc0	t0, CP0_STATUS
 92
 93	/*
 94	 * Clear the bits used to index the caches. Note that the architecture
 95	 * dictates that writing to any of TagLo or TagHi selects 0 or 2 should
 96	 * be valid for all MIPS32 CPUs, even those for which said writes are
 97	 * unnecessary.
 98	 */
 99	mtc0	zero, CP0_TAGLO, 0
100	mtc0	zero, CP0_TAGHI, 0
101	mtc0	zero, CP0_TAGLO, 2
102	mtc0	zero, CP0_TAGHI, 2
103	ehb
104
105	/* Primary cache configuration is indicated by Config1 */
106	mfc0	v0, CP0_CONFIG, 1
107
108	/* Detect I-cache line size */
109	_EXT	t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ
110	beqz	t0, icache_done
111	 li	t1, 2
112	sllv	t0, t1, t0
113
114	/* Detect I-cache size */
115	_EXT	t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ
116	xori	t2, t1, 0x7
117	beqz	t2, 1f
118	 li	t3, 32
119	addiu	t1, t1, 1
120	sllv	t1, t3, t1
1211:	/* At this point t1 == I-cache sets per way */
122	_EXT	t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ
123	addiu	t2, t2, 1
124	mul	t1, t1, t0
125	mul	t1, t1, t2
126
127	li	a0, CKSEG0
128	PTR_ADD	a1, a0, t1
1291:	cache	Index_Store_Tag_I, 0(a0)
130	PTR_ADD	a0, a0, t0
131	bne	a0, a1, 1b
132	 nop
133icache_done:
134
135	/* Detect D-cache line size */
136	_EXT	t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ
137	beqz	t0, dcache_done
138	 li	t1, 2
139	sllv	t0, t1, t0
140
141	/* Detect D-cache size */
142	_EXT	t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ
143	xori	t2, t1, 0x7
144	beqz	t2, 1f
145	 li	t3, 32
146	addiu	t1, t1, 1
147	sllv	t1, t3, t1
1481:	/* At this point t1 == D-cache sets per way */
149	_EXT	t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ
150	addiu	t2, t2, 1
151	mul	t1, t1, t0
152	mul	t1, t1, t2
153
154	li	a0, CKSEG0
155	PTR_ADDU a1, a0, t1
156	PTR_SUBU a1, a1, t0
1571:	cache	Index_Store_Tag_D, 0(a0)
158	bne	a0, a1, 1b
159	 PTR_ADD a0, a0, t0
160dcache_done:
161
162	/* Set Kseg0 CCA to that in s0 */
163	mfc0	t0, CP0_CONFIG
164	ori	t0, 0x7
165	xori	t0, 0x7
166	or	t0, t0, s0
167	mtc0	t0, CP0_CONFIG
168	ehb
169
170	/* Calculate an uncached address for the CM GCRs */
171	MFC0	v1, CP0_CMGCRBASE
172	PTR_SLL	v1, v1, 4
173	PTR_LI	t0, UNCAC_BASE
174	PTR_ADDU v1, v1, t0
175
176	/* Enter the coherent domain */
177	li	t0, 0xff
178	sw	t0, GCR_CL_COHERENCE_OFS(v1)
179	ehb
180
181	/* Jump to kseg0 */
182	PTR_LA	t0, 1f
183	jr	t0
184	 nop
185
186	/*
187	 * We're up, cached & coherent. Perform any further required core-level
188	 * initialisation.
189	 */
1901:	jal	mips_cps_core_init
 
 
 
 
 
 
 
191	 nop
192
193	/* Do any EVA initialization if necessary */
194	eva_init
 
195
196	/*
197	 * Boot any other VPEs within this core that should be online, and
198	 * deactivate this VPE if it should be offline.
199	 */
 
200	jal	mips_cps_boot_vpes
201	 nop
202
203	/* Off we go! */
204	PTR_L	t1, VPEBOOTCFG_PC(v0)
205	PTR_L	gp, VPEBOOTCFG_GP(v0)
206	PTR_L	sp, VPEBOOTCFG_SP(v0)
207	jr	t1
208	 nop
209	END(mips_cps_core_entry)
210
211.org 0x200
212LEAF(excep_tlbfill)
213	DUMP_EXCEP("TLB Fill")
214	b	.
215	 nop
216	END(excep_tlbfill)
217
218.org 0x280
219LEAF(excep_xtlbfill)
220	DUMP_EXCEP("XTLB Fill")
221	b	.
222	 nop
223	END(excep_xtlbfill)
224
225.org 0x300
226LEAF(excep_cache)
227	DUMP_EXCEP("Cache")
228	b	.
229	 nop
230	END(excep_cache)
231
232.org 0x380
233LEAF(excep_genex)
234	DUMP_EXCEP("General")
235	b	.
236	 nop
237	END(excep_genex)
238
239.org 0x400
240LEAF(excep_intex)
241	DUMP_EXCEP("Interrupt")
242	b	.
243	 nop
244	END(excep_intex)
245
246.org 0x480
247LEAF(excep_ejtag)
248	DUMP_EXCEP("EJTAG")
249	PTR_LA	k0, ejtag_debug_handler
250	jr	k0
251	 nop
252	END(excep_ejtag)
253
254LEAF(mips_cps_core_init)
255#ifdef CONFIG_MIPS_MT_SMP
256	/* Check that the core implements the MT ASE */
257	has_mt	t0, 3f
258
259	.set	push
 
260	.set	mt
261
262	/* Only allow 1 TC per VPE to execute... */
263	dmt
264
265	/* ...and for the moment only 1 VPE */
266	dvpe
267	PTR_LA	t1, 1f
268	jr.hb	t1
269	 nop
270
271	/* Enter VPE configuration state */
2721:	mfc0	t0, CP0_MVPCONTROL
273	ori	t0, t0, MVPCONTROL_VPC
274	mtc0	t0, CP0_MVPCONTROL
275
276	/* Retrieve the number of VPEs within the core */
277	mfc0	t0, CP0_MVPCONF0
278	srl	t0, t0, MVPCONF0_PVPE_SHIFT
279	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
280	addiu	ta3, t0, 1
281
282	/* If there's only 1, we're done */
283	beqz	t0, 2f
284	 nop
285
286	/* Loop through each VPE within this core */
287	li	ta1, 1
288
2891:	/* Operate on the appropriate TC */
290	mtc0	ta1, CP0_VPECONTROL
291	ehb
292
293	/* Bind TC to VPE (1:1 TC:VPE mapping) */
294	mttc0	ta1, CP0_TCBIND
295
296	/* Set exclusive TC, non-active, master */
297	li	t0, VPECONF0_MVP
298	sll	t1, ta1, VPECONF0_XTC_SHIFT
299	or	t0, t0, t1
300	mttc0	t0, CP0_VPECONF0
301
302	/* Set TC non-active, non-allocatable */
303	mttc0	zero, CP0_TCSTATUS
304
305	/* Set TC halted */
306	li	t0, TCHALT_H
307	mttc0	t0, CP0_TCHALT
308
309	/* Next VPE */
310	addiu	ta1, ta1, 1
311	slt	t0, ta1, ta3
312	bnez	t0, 1b
313	 nop
314
315	/* Leave VPE configuration state */
3162:	mfc0	t0, CP0_MVPCONTROL
317	xori	t0, t0, MVPCONTROL_VPC
318	mtc0	t0, CP0_MVPCONTROL
319
3203:	.set	pop
321#endif
322	jr	ra
323	 nop
324	END(mips_cps_core_init)
325
326LEAF(mips_cps_boot_vpes)
327	/* Retrieve CM base address */
328	PTR_LA	t0, mips_cm_base
329	PTR_L	t0, 0(t0)
330
 
 
331	/* Calculate a pointer to this cores struct core_boot_config */
332	lw	t0, GCR_CL_ID_OFS(t0)
333	li	t1, COREBOOTCFG_SIZE
334	mul	t0, t0, t1
335	PTR_LA	t1, mips_cps_core_bootcfg
336	PTR_L	t1, 0(t1)
337	PTR_ADDU t0, t0, t1
338
339	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
340	li	t9, 0
341#ifdef CONFIG_MIPS_MT_SMP
 
 
 
 
 
 
 
 
 
 
342	has_mt	ta2, 1f
343
344	/* Find the number of VPEs present in the core */
345	mfc0	t1, CP0_MVPCONF0
346	srl	t1, t1, MVPCONF0_PVPE_SHIFT
347	andi	t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
348	addiu	t1, t1, 1
349
350	/* Calculate a mask for the VPE ID from EBase.CPUNum */
351	clz	t1, t1
352	li	t2, 31
353	subu	t1, t2, t1
354	li	t2, 1
355	sll	t1, t2, t1
356	addiu	t1, t1, -1
357
358	/* Retrieve the VPE ID from EBase.CPUNum */
359	mfc0	t9, $15, 1
360	and	t9, t9, t1
361#endif
362
3631:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
364	li	t1, VPEBOOTCFG_SIZE
365	mul	v0, t9, t1
366	PTR_L	ta3, COREBOOTCFG_VPECONFIG(t0)
367	PTR_ADDU v0, v0, ta3
368
369#ifdef CONFIG_MIPS_MT_SMP
370
371	/* If the core doesn't support MT then return */
372	bnez	ta2, 1f
373	 nop
374	jr	ra
375	 nop
 
 
 
 
 
376
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
377	.set	push
 
378	.set	mt
379
3801:	/* Enter VPE configuration state */
381	dvpe
 
 
382	PTR_LA	t1, 1f
383	jr.hb	t1
384	 nop
3851:	mfc0	t1, CP0_MVPCONTROL
386	ori	t1, t1, MVPCONTROL_VPC
387	mtc0	t1, CP0_MVPCONTROL
388	ehb
389
390	/* Loop through each VPE */
391	PTR_L	ta2, COREBOOTCFG_VPEMASK(t0)
392	move	t8, ta2
393	li	ta1, 0
394
395	/* Check whether the VPE should be running. If not, skip it */
3961:	andi	t0, ta2, 1
397	beqz	t0, 2f
398	 nop
399
400	/* Operate on the appropriate TC */
401	mfc0	t0, CP0_VPECONTROL
402	ori	t0, t0, VPECONTROL_TARGTC
403	xori	t0, t0, VPECONTROL_TARGTC
404	or	t0, t0, ta1
405	mtc0	t0, CP0_VPECONTROL
406	ehb
407
 
 
 
 
408	/* Skip the VPE if its TC is not halted */
409	mftc0	t0, CP0_TCHALT
410	beqz	t0, 2f
411	 nop
412
413	/* Calculate a pointer to the VPEs struct vpe_boot_config */
414	li	t0, VPEBOOTCFG_SIZE
415	mul	t0, t0, ta1
416	addu	t0, t0, ta3
417
418	/* Set the TC restart PC */
419	lw	t1, VPEBOOTCFG_PC(t0)
420	mttc0	t1, CP0_TCRESTART
421
422	/* Set the TC stack pointer */
423	lw	t1, VPEBOOTCFG_SP(t0)
424	mttgpr	t1, sp
425
426	/* Set the TC global pointer */
427	lw	t1, VPEBOOTCFG_GP(t0)
428	mttgpr	t1, gp
429
430	/* Copy config from this VPE */
431	mfc0	t0, CP0_CONFIG
432	mttc0	t0, CP0_CONFIG
433
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
434	/* Ensure no software interrupts are pending */
435	mttc0	zero, CP0_CAUSE
436	mttc0	zero, CP0_STATUS
437
438	/* Set TC active, not interrupt exempt */
439	mftc0	t0, CP0_TCSTATUS
440	li	t1, ~TCSTATUS_IXMT
441	and	t0, t0, t1
442	ori	t0, t0, TCSTATUS_A
443	mttc0	t0, CP0_TCSTATUS
444
445	/* Clear the TC halt bit */
446	mttc0	zero, CP0_TCHALT
447
448	/* Set VPE active */
449	mftc0	t0, CP0_VPECONF0
450	ori	t0, t0, VPECONF0_VPA
451	mttc0	t0, CP0_VPECONF0
452
453	/* Next VPE */
4542:	srl	ta2, ta2, 1
455	addiu	ta1, ta1, 1
456	bnez	ta2, 1b
457	 nop
458
459	/* Leave VPE configuration state */
460	mfc0	t1, CP0_MVPCONTROL
461	xori	t1, t1, MVPCONTROL_VPC
462	mtc0	t1, CP0_MVPCONTROL
463	ehb
464	evpe
465
 
 
466	/* Check whether this VPE is meant to be running */
467	li	t0, 1
468	sll	t0, t0, t9
469	and	t0, t0, t8
470	bnez	t0, 2f
471	 nop
472
473	/* This VPE should be offline, halt the TC */
474	li	t0, TCHALT_H
475	mtc0	t0, CP0_TCHALT
476	PTR_LA	t0, 1f
4771:	jr.hb	t0
478	 nop
479
4802:	.set	pop
481
482#endif /* CONFIG_MIPS_MT_SMP */
483
484	/* Return */
485	jr	ra
486	 nop
487	END(mips_cps_boot_vpes)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
488
489#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
490
491	/* Calculate a pointer to this CPUs struct mips_static_suspend_state */
492	.macro	psstate	dest
493	.set	push
494	.set	noat
495	lw	$1, TI_CPU(gp)
496	sll	$1, $1, LONGLOG
497	PTR_LA	\dest, __per_cpu_offset
498	addu	$1, $1, \dest
499	lw	$1, 0($1)
500	PTR_LA	\dest, cps_cpu_state
501	addu	\dest, \dest, $1
502	.set	pop
503	.endm
504
505LEAF(mips_cps_pm_save)
506	/* Save CPU state */
507	SUSPEND_SAVE_REGS
508	psstate	t1
509	SUSPEND_SAVE_STATIC
510	jr	v0
511	 nop
512	END(mips_cps_pm_save)
513
514LEAF(mips_cps_pm_restore)
515	/* Restore CPU state */
516	psstate	t1
517	RESUME_RESTORE_STATIC
518	RESUME_RESTORE_REGS_RETURN
519	END(mips_cps_pm_restore)
520
521#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */
v6.8
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 * Copyright (C) 2013 Imagination Technologies
  4 * Author: Paul Burton <paul.burton@mips.com>
 
 
 
 
 
  5 */
  6
  7#include <asm/addrspace.h>
  8#include <asm/asm.h>
  9#include <asm/asm-offsets.h>
 10#include <asm/asmmacro.h>
 11#include <asm/cacheops.h>
 12#include <asm/eva.h>
 13#include <asm/mipsregs.h>
 14#include <asm/mipsmtregs.h>
 15#include <asm/pm.h>
 16#include <asm/smp-cps.h>
 17
 18#define GCR_CPC_BASE_OFS	0x0088
 19#define GCR_CL_COHERENCE_OFS	0x2008
 20#define GCR_CL_ID_OFS		0x2028
 21
 22#define CPC_CL_VC_STOP_OFS	0x2020
 23#define CPC_CL_VC_RUN_OFS	0x2028
 24
 25.extern mips_cm_base
 26
 27.set noreorder
 28
 29#ifdef CONFIG_64BIT
 30# define STATUS_BITDEPS		ST0_KX
 31#else
 32# define STATUS_BITDEPS		0
 33#endif
 34
 35#ifdef CONFIG_MIPS_CPS_NS16550
 36
 37#define DUMP_EXCEP(name)		\
 38	PTR_LA	a0, 8f;			\
 39	jal	mips_cps_bev_dump;	\
 40	 nop;				\
 41	TEXT(name)
 42
 43#else /* !CONFIG_MIPS_CPS_NS16550 */
 44
 45#define DUMP_EXCEP(name)
 46
 47#endif /* !CONFIG_MIPS_CPS_NS16550 */
 48
 49	/*
 50	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
 51	 * MT is not supported then branch to nomt.
 52	 */
 53	.macro	has_mt	dest, nomt
 54	mfc0	\dest, CP0_CONFIG, 1
 55	bgez	\dest, \nomt
 56	 mfc0	\dest, CP0_CONFIG, 2
 57	bgez	\dest, \nomt
 58	 mfc0	\dest, CP0_CONFIG, 3
 59	andi	\dest, \dest, MIPS_CONF3_MT
 60	beqz	\dest, \nomt
 61	 nop
 62	.endm
 63
 64	/*
 65	 * Set dest to non-zero if the core supports MIPSr6 multithreading
 66	 * (ie. VPs), else zero. If MIPSr6 multithreading is not supported then
 67	 * branch to nomt.
 68	 */
 69	.macro	has_vp	dest, nomt
 70	mfc0	\dest, CP0_CONFIG, 1
 71	bgez	\dest, \nomt
 72	 mfc0	\dest, CP0_CONFIG, 2
 73	bgez	\dest, \nomt
 74	 mfc0	\dest, CP0_CONFIG, 3
 75	bgez	\dest, \nomt
 76	 mfc0	\dest, CP0_CONFIG, 4
 77	bgez	\dest, \nomt
 78	 mfc0	\dest, CP0_CONFIG, 5
 79	andi	\dest, \dest, MIPS_CONF5_VP
 80	beqz	\dest, \nomt
 81	 nop
 82	.endm
 83
 84
 85.balign 0x1000
 86
 87LEAF(mips_cps_core_entry)
 88	/*
 89	 * These first several instructions will be patched by cps_smp_setup to load the
 90	 * CCA to use into register s0 and GCR base address to register s1.
 91	 */
 92	.rept   CPS_ENTRY_PATCH_INSNS
 93	nop
 94	.endr
 95
 96	.global mips_cps_core_entry_patch_end
 97mips_cps_core_entry_patch_end:
 98
 99	/* Check whether we're here due to an NMI */
100	mfc0	k0, CP0_STATUS
101	and	k0, k0, ST0_NMI
102	beqz	k0, not_nmi
103	 nop
104
105	/* This is an NMI */
106	PTR_LA	k0, nmi_handler
107	jr	k0
108	 nop
109
110not_nmi:
111	/* Setup Cause */
112	li	t0, CAUSEF_IV
113	mtc0	t0, CP0_CAUSE
114
115	/* Setup Status */
116	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
117	mtc0	t0, CP0_STATUS
118
119	/* We don't know how to do coherence setup on earlier ISA */
120#if MIPS_ISA_REV > 0
121	/* Skip cache & coherence setup if we're already coherent */
122	lw	s7, GCR_CL_COHERENCE_OFS(s1)
123	bnez	s7, 1f
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
124	 nop
 
125
126	/* Initialize the L1 caches */
127	jal	mips_cps_cache_init
128	 nop
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
129
130	/* Enter the coherent domain */
131	li	t0, 0xff
132	sw	t0, GCR_CL_COHERENCE_OFS(s1)
133	ehb
134#endif /* MIPS_ISA_REV > 0 */
 
 
135
136	/* Set Kseg0 CCA to that in s0 */
1371:	mfc0	t0, CP0_CONFIG
138	ori	t0, 0x7
139	xori	t0, 0x7
140	or	t0, t0, s0
141	mtc0	t0, CP0_CONFIG
142	ehb
143
 
 
 
 
 
 
 
 
 
 
 
144	/* Jump to kseg0 */
145	PTR_LA	t0, 1f
146	jr	t0
147	 nop
148
149	/*
150	 * We're up, cached & coherent. Perform any EVA initialization necessary
151	 * before we access memory.
152	 */
1531:	eva_init
154
155	/* Retrieve boot configuration pointers */
156	jal	mips_cps_get_bootcfg
157	 nop
158
159	/* Skip core-level init if we started up coherent */
160	bnez	s7, 1f
161	 nop
162
163	/* Perform any further required core-level initialisation */
164	jal	mips_cps_core_init
165	 nop
166
167	/*
168	 * Boot any other VPEs within this core that should be online, and
169	 * deactivate this VPE if it should be offline.
170	 */
171	move	a1, t9
172	jal	mips_cps_boot_vpes
173	 move	a0, v0
174
175	/* Off we go! */
1761:	PTR_L	t1, VPEBOOTCFG_PC(v1)
177	PTR_L	gp, VPEBOOTCFG_GP(v1)
178	PTR_L	sp, VPEBOOTCFG_SP(v1)
179	jr	t1
180	 nop
181	END(mips_cps_core_entry)
182
183.org 0x200
184LEAF(excep_tlbfill)
185	DUMP_EXCEP("TLB Fill")
186	b	.
187	 nop
188	END(excep_tlbfill)
189
190.org 0x280
191LEAF(excep_xtlbfill)
192	DUMP_EXCEP("XTLB Fill")
193	b	.
194	 nop
195	END(excep_xtlbfill)
196
197.org 0x300
198LEAF(excep_cache)
199	DUMP_EXCEP("Cache")
200	b	.
201	 nop
202	END(excep_cache)
203
204.org 0x380
205LEAF(excep_genex)
206	DUMP_EXCEP("General")
207	b	.
208	 nop
209	END(excep_genex)
210
211.org 0x400
212LEAF(excep_intex)
213	DUMP_EXCEP("Interrupt")
214	b	.
215	 nop
216	END(excep_intex)
217
218.org 0x480
219LEAF(excep_ejtag)
 
220	PTR_LA	k0, ejtag_debug_handler
221	jr	k0
222	 nop
223	END(excep_ejtag)
224
225LEAF(mips_cps_core_init)
226#ifdef CONFIG_MIPS_MT_SMP
227	/* Check that the core implements the MT ASE */
228	has_mt	t0, 3f
229
230	.set	push
231	.set	MIPS_ISA_LEVEL_RAW
232	.set	mt
233
234	/* Only allow 1 TC per VPE to execute... */
235	dmt
236
237	/* ...and for the moment only 1 VPE */
238	dvpe
239	PTR_LA	t1, 1f
240	jr.hb	t1
241	 nop
242
243	/* Enter VPE configuration state */
2441:	mfc0	t0, CP0_MVPCONTROL
245	ori	t0, t0, MVPCONTROL_VPC
246	mtc0	t0, CP0_MVPCONTROL
247
248	/* Retrieve the number of VPEs within the core */
249	mfc0	t0, CP0_MVPCONF0
250	srl	t0, t0, MVPCONF0_PVPE_SHIFT
251	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
252	addiu	ta3, t0, 1
253
254	/* If there's only 1, we're done */
255	beqz	t0, 2f
256	 nop
257
258	/* Loop through each VPE within this core */
259	li	ta1, 1
260
2611:	/* Operate on the appropriate TC */
262	mtc0	ta1, CP0_VPECONTROL
263	ehb
264
265	/* Bind TC to VPE (1:1 TC:VPE mapping) */
266	mttc0	ta1, CP0_TCBIND
267
268	/* Set exclusive TC, non-active, master */
269	li	t0, VPECONF0_MVP
270	sll	t1, ta1, VPECONF0_XTC_SHIFT
271	or	t0, t0, t1
272	mttc0	t0, CP0_VPECONF0
273
274	/* Set TC non-active, non-allocatable */
275	mttc0	zero, CP0_TCSTATUS
276
277	/* Set TC halted */
278	li	t0, TCHALT_H
279	mttc0	t0, CP0_TCHALT
280
281	/* Next VPE */
282	addiu	ta1, ta1, 1
283	slt	t0, ta1, ta3
284	bnez	t0, 1b
285	 nop
286
287	/* Leave VPE configuration state */
2882:	mfc0	t0, CP0_MVPCONTROL
289	xori	t0, t0, MVPCONTROL_VPC
290	mtc0	t0, CP0_MVPCONTROL
291
2923:	.set	pop
293#endif
294	jr	ra
295	 nop
296	END(mips_cps_core_init)
297
298/**
299 * mips_cps_get_bootcfg() - retrieve boot configuration pointers
300 *
301 * Returns: pointer to struct core_boot_config in v0, pointer to
302 *          struct vpe_boot_config in v1, VPE ID in t9
303 */
304LEAF(mips_cps_get_bootcfg)
305	/* Calculate a pointer to this cores struct core_boot_config */
306	lw	t0, GCR_CL_ID_OFS(s1)
307	li	t1, COREBOOTCFG_SIZE
308	mul	t0, t0, t1
309	PTR_LA	t1, mips_cps_core_bootcfg
310	PTR_L	t1, 0(t1)
311	PTR_ADDU v0, t0, t1
312
313	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
314	li	t9, 0
315#if defined(CONFIG_CPU_MIPSR6)
316	has_vp	ta2, 1f
317
318	/*
319	 * Assume non-contiguous numbering. Perhaps some day we'll need
320	 * to handle contiguous VP numbering, but no such systems yet
321	 * exist.
322	 */
323	mfc0	t9, CP0_GLOBALNUMBER
324	andi	t9, t9, MIPS_GLOBALNUMBER_VP
325#elif defined(CONFIG_MIPS_MT_SMP)
326	has_mt	ta2, 1f
327
328	/* Find the number of VPEs present in the core */
329	mfc0	t1, CP0_MVPCONF0
330	srl	t1, t1, MVPCONF0_PVPE_SHIFT
331	andi	t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
332	addiu	t1, t1, 1
333
334	/* Calculate a mask for the VPE ID from EBase.CPUNum */
335	clz	t1, t1
336	li	t2, 31
337	subu	t1, t2, t1
338	li	t2, 1
339	sll	t1, t2, t1
340	addiu	t1, t1, -1
341
342	/* Retrieve the VPE ID from EBase.CPUNum */
343	mfc0	t9, $15, 1
344	and	t9, t9, t1
345#endif
346
3471:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
348	li	t1, VPEBOOTCFG_SIZE
349	mul	v1, t9, t1
350	PTR_L	ta3, COREBOOTCFG_VPECONFIG(v0)
351	PTR_ADDU v1, v1, ta3
352
 
 
 
 
 
353	jr	ra
354	 nop
355	END(mips_cps_get_bootcfg)
356
357LEAF(mips_cps_boot_vpes)
358	lw	ta2, COREBOOTCFG_VPEMASK(a0)
359	PTR_L	ta3, COREBOOTCFG_VPECONFIG(a0)
360
361#if defined(CONFIG_CPU_MIPSR6)
362
363	has_vp	t0, 5f
364
365	/* Find base address of CPC */
366	PTR_LA	t1, mips_gcr_base
367	PTR_L	t1, 0(t1)
368	PTR_L	t1, GCR_CPC_BASE_OFS(t1)
369	PTR_LI	t2, ~0x7fff
370	and	t1, t1, t2
371	PTR_LI	t2, UNCAC_BASE
372	PTR_ADD	t1, t1, t2
373
374	/* Start any other VPs that ought to be running */
375	PTR_S	ta2, CPC_CL_VC_RUN_OFS(t1)
376
377	/* Ensure this VP stops running if it shouldn't be */
378	not	ta2
379	PTR_S	ta2, CPC_CL_VC_STOP_OFS(t1)
380	ehb
381
382#elif defined(CONFIG_MIPS_MT)
383
384	/* If the core doesn't support MT then return */
385	has_mt	t0, 5f
386
387	/* Enter VPE configuration state */
388	.set	push
389	.set	MIPS_ISA_LEVEL_RAW
390	.set	mt
 
 
391	dvpe
392	.set	pop
393
394	PTR_LA	t1, 1f
395	jr.hb	t1
396	 nop
3971:	mfc0	t1, CP0_MVPCONTROL
398	ori	t1, t1, MVPCONTROL_VPC
399	mtc0	t1, CP0_MVPCONTROL
400	ehb
401
402	/* Loop through each VPE */
 
403	move	t8, ta2
404	li	ta1, 0
405
406	/* Check whether the VPE should be running. If not, skip it */
4071:	andi	t0, ta2, 1
408	beqz	t0, 2f
409	 nop
410
411	/* Operate on the appropriate TC */
412	mfc0	t0, CP0_VPECONTROL
413	ori	t0, t0, VPECONTROL_TARGTC
414	xori	t0, t0, VPECONTROL_TARGTC
415	or	t0, t0, ta1
416	mtc0	t0, CP0_VPECONTROL
417	ehb
418
419	.set	push
420	.set	MIPS_ISA_LEVEL_RAW
421	.set	mt
422
423	/* Skip the VPE if its TC is not halted */
424	mftc0	t0, CP0_TCHALT
425	beqz	t0, 2f
426	 nop
427
428	/* Calculate a pointer to the VPEs struct vpe_boot_config */
429	li	t0, VPEBOOTCFG_SIZE
430	mul	t0, t0, ta1
431	addu	t0, t0, ta3
432
433	/* Set the TC restart PC */
434	lw	t1, VPEBOOTCFG_PC(t0)
435	mttc0	t1, CP0_TCRESTART
436
437	/* Set the TC stack pointer */
438	lw	t1, VPEBOOTCFG_SP(t0)
439	mttgpr	t1, sp
440
441	/* Set the TC global pointer */
442	lw	t1, VPEBOOTCFG_GP(t0)
443	mttgpr	t1, gp
444
445	/* Copy config from this VPE */
446	mfc0	t0, CP0_CONFIG
447	mttc0	t0, CP0_CONFIG
448
449	/*
450	 * Copy the EVA config from this VPE if the CPU supports it.
451	 * CONFIG3 must exist to be running MT startup - just read it.
452	 */
453	mfc0	t0, CP0_CONFIG, 3
454	and	t0, t0, MIPS_CONF3_SC
455	beqz	t0, 3f
456	 nop
457	mfc0    t0, CP0_SEGCTL0
458	mttc0	t0, CP0_SEGCTL0
459	mfc0    t0, CP0_SEGCTL1
460	mttc0	t0, CP0_SEGCTL1
461	mfc0    t0, CP0_SEGCTL2
462	mttc0	t0, CP0_SEGCTL2
4633:
464	/* Ensure no software interrupts are pending */
465	mttc0	zero, CP0_CAUSE
466	mttc0	zero, CP0_STATUS
467
468	/* Set TC active, not interrupt exempt */
469	mftc0	t0, CP0_TCSTATUS
470	li	t1, ~TCSTATUS_IXMT
471	and	t0, t0, t1
472	ori	t0, t0, TCSTATUS_A
473	mttc0	t0, CP0_TCSTATUS
474
475	/* Clear the TC halt bit */
476	mttc0	zero, CP0_TCHALT
477
478	/* Set VPE active */
479	mftc0	t0, CP0_VPECONF0
480	ori	t0, t0, VPECONF0_VPA
481	mttc0	t0, CP0_VPECONF0
482
483	/* Next VPE */
4842:	srl	ta2, ta2, 1
485	addiu	ta1, ta1, 1
486	bnez	ta2, 1b
487	 nop
488
489	/* Leave VPE configuration state */
490	mfc0	t1, CP0_MVPCONTROL
491	xori	t1, t1, MVPCONTROL_VPC
492	mtc0	t1, CP0_MVPCONTROL
493	ehb
494	evpe
495
496	.set	pop
497
498	/* Check whether this VPE is meant to be running */
499	li	t0, 1
500	sll	t0, t0, a1
501	and	t0, t0, t8
502	bnez	t0, 2f
503	 nop
504
505	/* This VPE should be offline, halt the TC */
506	li	t0, TCHALT_H
507	mtc0	t0, CP0_TCHALT
508	PTR_LA	t0, 1f
5091:	jr.hb	t0
510	 nop
511
5122:
513
514#endif /* CONFIG_MIPS_MT_SMP */
515
516	/* Return */
5175:	jr	ra
518	 nop
519	END(mips_cps_boot_vpes)
520
521#if MIPS_ISA_REV > 0
522LEAF(mips_cps_cache_init)
523	/*
524	 * Clear the bits used to index the caches. Note that the architecture
525	 * dictates that writing to any of TagLo or TagHi selects 0 or 2 should
526	 * be valid for all MIPS32 CPUs, even those for which said writes are
527	 * unnecessary.
528	 */
529	mtc0	zero, CP0_TAGLO, 0
530	mtc0	zero, CP0_TAGHI, 0
531	mtc0	zero, CP0_TAGLO, 2
532	mtc0	zero, CP0_TAGHI, 2
533	ehb
534
535	/* Primary cache configuration is indicated by Config1 */
536	mfc0	v0, CP0_CONFIG, 1
537
538	/* Detect I-cache line size */
539	_EXT	t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ
540	beqz	t0, icache_done
541	 li	t1, 2
542	sllv	t0, t1, t0
543
544	/* Detect I-cache size */
545	_EXT	t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ
546	xori	t2, t1, 0x7
547	beqz	t2, 1f
548	 li	t3, 32
549	addiu	t1, t1, 1
550	sllv	t1, t3, t1
5511:	/* At this point t1 == I-cache sets per way */
552	_EXT	t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ
553	addiu	t2, t2, 1
554	mul	t1, t1, t0
555	mul	t1, t1, t2
556
557	li	a0, CKSEG0
558	PTR_ADD	a1, a0, t1
5591:	cache	Index_Store_Tag_I, 0(a0)
560	PTR_ADD	a0, a0, t0
561	bne	a0, a1, 1b
562	 nop
563icache_done:
564
565	/* Detect D-cache line size */
566	_EXT	t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ
567	beqz	t0, dcache_done
568	 li	t1, 2
569	sllv	t0, t1, t0
570
571	/* Detect D-cache size */
572	_EXT	t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ
573	xori	t2, t1, 0x7
574	beqz	t2, 1f
575	 li	t3, 32
576	addiu	t1, t1, 1
577	sllv	t1, t3, t1
5781:	/* At this point t1 == D-cache sets per way */
579	_EXT	t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ
580	addiu	t2, t2, 1
581	mul	t1, t1, t0
582	mul	t1, t1, t2
583
584	li	a0, CKSEG0
585	PTR_ADDU a1, a0, t1
586	PTR_SUBU a1, a1, t0
5871:	cache	Index_Store_Tag_D, 0(a0)
588	bne	a0, a1, 1b
589	 PTR_ADD a0, a0, t0
590dcache_done:
591
592	jr	ra
593	 nop
594	END(mips_cps_cache_init)
595#endif /* MIPS_ISA_REV > 0 */
596
597#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
598
599	/* Calculate a pointer to this CPUs struct mips_static_suspend_state */
600	.macro	psstate	dest
601	.set	push
602	.set	noat
603	lw	$1, TI_CPU(gp)
604	sll	$1, $1, LONGLOG
605	PTR_LA	\dest, __per_cpu_offset
606	addu	$1, $1, \dest
607	lw	$1, 0($1)
608	PTR_LA	\dest, cps_cpu_state
609	addu	\dest, \dest, $1
610	.set	pop
611	.endm
612
613LEAF(mips_cps_pm_save)
614	/* Save CPU state */
615	SUSPEND_SAVE_REGS
616	psstate	t1
617	SUSPEND_SAVE_STATIC
618	jr	v0
619	 nop
620	END(mips_cps_pm_save)
621
622LEAF(mips_cps_pm_restore)
623	/* Restore CPU state */
624	psstate	t1
625	RESUME_RESTORE_STATIC
626	RESUME_RESTORE_REGS_RETURN
627	END(mips_cps_pm_restore)
628
629#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */