Loading...
1perf-script(1)
2=============
3
4NAME
5----
6perf-script - Read perf.data (created by perf record) and display trace output
7
8SYNOPSIS
9--------
10[verse]
11'perf script' [<options>]
12'perf script' [<options>] record <script> [<record-options>] <command>
13'perf script' [<options>] report <script> [script-args]
14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
15'perf script' [<options>] <top-script> [script-args]
16
17DESCRIPTION
18-----------
19This command reads the input file and displays the trace recorded.
20
21There are several variants of perf script:
22
23 'perf script' to see a detailed trace of the workload that was
24 recorded.
25
26 You can also run a set of pre-canned scripts that aggregate and
27 summarize the raw trace data in various ways (the list of scripts is
28 available via 'perf script -l'). The following variants allow you to
29 record and run those scripts:
30
31 'perf script record <script> <command>' to record the events required
32 for 'perf script report'. <script> is the name displayed in the
33 output of 'perf script --list' i.e. the actual script name minus any
34 language extension. If <command> is not specified, the events are
35 recorded using the -a (system-wide) 'perf record' option.
36
37 'perf script report <script> [args]' to run and display the results
38 of <script>. <script> is the name displayed in the output of 'perf
39 script --list' i.e. the actual script name minus any language
40 extension. The perf.data output from a previous run of 'perf script
41 record <script>' is used and should be present for this command to
42 succeed. [args] refers to the (mainly optional) args expected by
43 the script.
44
45 'perf script <script> <required-script-args> <command>' to both
46 record the events required for <script> and to run the <script>
47 using 'live-mode' i.e. without writing anything to disk. <script>
48 is the name displayed in the output of 'perf script --list' i.e. the
49 actual script name minus any language extension. If <command> is
50 not specified, the events are recorded using the -a (system-wide)
51 'perf record' option. If <script> has any required args, they
52 should be specified before <command>. This mode doesn't allow for
53 optional script args to be specified; if optional script args are
54 desired, they can be specified using separate 'perf script record'
55 and 'perf script report' commands, with the stdout of the record step
56 piped to the stdin of the report script, using the '-o -' and '-i -'
57 options of the corresponding commands.
58
59 'perf script <top-script>' to both record the events required for
60 <top-script> and to run the <top-script> using 'live-mode'
61 i.e. without writing anything to disk. <top-script> is the name
62 displayed in the output of 'perf script --list' i.e. the actual
63 script name minus any language extension; a <top-script> is defined
64 as any script name ending with the string 'top'.
65
66 [<record-options>] can be passed to the record steps of 'perf script
67 record' and 'live-mode' variants; this isn't possible however for
68 <top-script> 'live-mode' or 'perf script report' variants.
69
70 See the 'SEE ALSO' section for links to language-specific
71 information on how to write and run your own trace scripts.
72
73OPTIONS
74-------
75<command>...::
76 Any command you can specify in a shell.
77
78-D::
79--dump-raw-trace=::
80 Display verbose dump of the trace data.
81
82-L::
83--Latency=::
84 Show latency attributes (irqs/preemption disabled, etc).
85
86-l::
87--list=::
88 Display a list of available trace scripts.
89
90-s ['lang']::
91--script=::
92 Process trace data with the given script ([lang]:script[.ext]).
93 If the string 'lang' is specified in place of a script name, a
94 list of supported languages will be displayed instead.
95
96-g::
97--gen-script=::
98 Generate perf-script.[ext] starter script for given language,
99 using current perf.data.
100
101-a::
102 Force system-wide collection. Scripts run without a <command>
103 normally use -a by default, while scripts run with a <command>
104 normally don't - this option allows the latter to be run in
105 system-wide mode.
106
107-i::
108--input=::
109 Input file name. (default: perf.data unless stdin is a fifo)
110
111-d::
112--debug-mode::
113 Do various checks like samples ordering and lost events.
114
115-F::
116--fields::
117 Comma separated list of fields to print. Options are:
118 comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
119 srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output, brstackinsn,
120 brstackoff, callindent, insn, insnlen, synth, phys_addr, metric, misc.
121 Field list can be prepended with the type, trace, sw or hw,
122 to indicate to which event type the field list applies.
123 e.g., -F sw:comm,tid,time,ip,sym and -F trace:time,cpu,trace
124
125 perf script -F <fields>
126
127 is equivalent to:
128
129 perf script -F trace:<fields> -F sw:<fields> -F hw:<fields>
130
131 i.e., the specified fields apply to all event types if the type string
132 is not given.
133
134 In addition to overriding fields, it is also possible to add or remove
135 fields from the defaults. For example
136
137 -F -cpu,+insn
138
139 removes the cpu field and adds the insn field. Adding/removing fields
140 cannot be mixed with normal overriding.
141
142 The arguments are processed in the order received. A later usage can
143 reset a prior request. e.g.:
144
145 -F trace: -F comm,tid,time,ip,sym
146
147 The first -F suppresses trace events (field list is ""), but then the
148 second invocation sets the fields to comm,tid,time,ip,sym. In this case a
149 warning is given to the user:
150
151 "Overriding previous field request for all events."
152
153 Alternatively, consider the order:
154
155 -F comm,tid,time,ip,sym -F trace:
156
157 The first -F sets the fields for all events and the second -F
158 suppresses trace events. The user is given a warning message about
159 the override, and the result of the above is that only S/W and H/W
160 events are displayed with the given fields.
161
162 For the 'wildcard' option if a user selected field is invalid for an
163 event type, a message is displayed to the user that the option is
164 ignored for that type. For example:
165
166 $ perf script -F comm,tid,trace
167 'trace' not valid for hardware events. Ignoring.
168 'trace' not valid for software events. Ignoring.
169
170 Alternatively, if the type is given an invalid field is specified it
171 is an error. For example:
172
173 perf script -v -F sw:comm,tid,trace
174 'trace' not valid for software events.
175
176 At this point usage is displayed, and perf-script exits.
177
178 The flags field is synthesized and may have a value when Instruction
179 Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
180 call, return, conditional, system, asynchronous, interrupt,
181 transaction abort, trace begin, trace end, and in transaction,
182 respectively. Known combinations of flags are printed more nicely e.g.
183 "call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b",
184 "int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs",
185 "async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB",
186 "tr end" for "bE". However the "x" flag will be display separately in those
187 cases e.g. "jcc (x)" for a condition branch within a transaction.
188
189 The callindent field is synthesized and may have a value when
190 Instruction Trace decoding. For calls and returns, it will display the
191 name of the symbol indented with spaces to reflect the stack depth.
192
193 When doing instruction trace decoding insn and insnlen give the
194 instruction bytes and the instruction length of the current
195 instruction.
196
197 The synth field is used by synthesized events which may be created when
198 Instruction Trace decoding.
199
200 Finally, a user may not set fields to none for all event types.
201 i.e., -F "" is not allowed.
202
203 The brstack output includes branch related information with raw addresses using the
204 /v/v/v/v/cycles syntax in the following order:
205 FROM: branch source instruction
206 TO : branch target instruction
207 M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
208 X/- : X=branch inside a transactional region, -=not in transaction region or not supported
209 A/- : A=TSX abort entry, -=not aborted region or not supported
210 cycles
211
212 The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
213
214 When brstackinsn is specified the full assembler sequences of branch sequences for each sample
215 is printed. This is the full execution path leading to the sample. This is only supported when the
216 sample was recorded with perf record -b or -j any.
217
218 The brstackoff field will print an offset into a specific dso/binary.
219
220 With the metric option perf script can compute metrics for
221 sampling periods, similar to perf stat. This requires
222 specifying a group with multiple metrics with the :S option
223 for perf record. perf will sample on the first event, and
224 compute metrics for all the events in the group. Please note
225 that the metric computed is averaged over the whole sampling
226 period, not just for the sample point.
227
228 For sample events it's possible to display misc field with -F +misc option,
229 following letters are displayed for each bit:
230
231 PERF_RECORD_MISC_KERNEL K
232 PERF_RECORD_MISC_USER U
233 PERF_RECORD_MISC_HYPERVISOR H
234 PERF_RECORD_MISC_GUEST_KERNEL G
235 PERF_RECORD_MISC_GUEST_USER g
236 PERF_RECORD_MISC_MMAP_DATA* M
237 PERF_RECORD_MISC_COMM_EXEC E
238 PERF_RECORD_MISC_SWITCH_OUT S
239 PERF_RECORD_MISC_SWITCH_OUT_PREEMPT Sp
240
241 $ perf script -F +misc ...
242 sched-messaging 1414 K 28690.636582: 4590 cycles ...
243 sched-messaging 1407 U 28690.636600: 325620 cycles ...
244 sched-messaging 1414 K 28690.636608: 19473 cycles ...
245 misc field ___________/
246
247-k::
248--vmlinux=<file>::
249 vmlinux pathname
250
251--kallsyms=<file>::
252 kallsyms pathname
253
254--symfs=<directory>::
255 Look for files with symbols relative to this directory.
256
257-G::
258--hide-call-graph::
259 When printing symbols do not display call chain.
260
261--stop-bt::
262 Stop display of callgraph at these symbols
263
264-C::
265--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
266 be provided as a comma-separated list with no space: 0,1. Ranges of
267 CPUs are specified with -: 0-2. Default is to report samples on all
268 CPUs.
269
270-c::
271--comms=::
272 Only display events for these comms. CSV that understands
273 file://filename entries.
274
275--pid=::
276 Only show events for given process ID (comma separated list).
277
278--tid=::
279 Only show events for given thread ID (comma separated list).
280
281-I::
282--show-info::
283 Display extended information about the perf.data file. This adds
284 information which may be very large and thus may clutter the display.
285 It currently includes: cpu and numa topology of the host system.
286 It can only be used with the perf script report mode.
287
288--show-kernel-path::
289 Try to resolve the path of [kernel.kallsyms]
290
291--show-task-events
292 Display task related events (e.g. FORK, COMM, EXIT).
293
294--show-mmap-events
295 Display mmap related events (e.g. MMAP, MMAP2).
296
297--show-namespace-events
298 Display namespace events i.e. events of type PERF_RECORD_NAMESPACES.
299
300--show-switch-events
301 Display context switch events i.e. events of type PERF_RECORD_SWITCH or
302 PERF_RECORD_SWITCH_CPU_WIDE.
303
304--show-lost-events
305 Display lost events i.e. events of type PERF_RECORD_LOST.
306
307--show-round-events
308 Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND.
309
310--demangle::
311 Demangle symbol names to human readable form. It's enabled by default,
312 disable with --no-demangle.
313
314--demangle-kernel::
315 Demangle kernel symbol names to human readable form (for C++ kernels).
316
317--header
318 Show perf.data header.
319
320--header-only
321 Show only perf.data header.
322
323--itrace::
324 Options for decoding instruction tracing data. The options are:
325
326include::itrace.txt[]
327
328 To disable decoding entirely, use --no-itrace.
329
330--full-source-path::
331 Show the full path for source files for srcline output.
332
333--max-stack::
334 Set the stack depth limit when parsing the callchain, anything
335 beyond the specified depth will be ignored. This is a trade-off
336 between information loss and faster processing especially for
337 workloads that can have a very long callchain stack.
338 Note that when using the --itrace option the synthesized callchain size
339 will override this value if the synthesized callchain size is bigger.
340
341 Default: 127
342
343--ns::
344 Use 9 decimal places when displaying time (i.e. show the nanoseconds)
345
346-f::
347--force::
348 Don't do ownership validation.
349
350--time::
351 Only analyze samples within given time window: <start>,<stop>. Times
352 have the format seconds.microseconds. If start is not given (i.e., time
353 string is ',x.y') then analysis starts at the beginning of the file. If
354 stop time is not given (i.e, time string is 'x.y,') then analysis goes
355 to end of file.
356
357 Also support time percent with multipe time range. Time string is
358 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
359
360 For example:
361 Select the second 10% time slice:
362 perf script --time 10%/2
363
364 Select from 0% to 10% time slice:
365 perf script --time 0%-10%
366
367 Select the first and second 10% time slices:
368 perf script --time 10%/1,10%/2
369
370 Select from 0% to 10% and 30% to 40% slices:
371 perf script --time 0%-10%,30%-40%
372
373--max-blocks::
374 Set the maximum number of program blocks to print with brstackasm for
375 each sample.
376
377--per-event-dump::
378 Create per event files with a "perf.data.EVENT.dump" name instead of
379 printing to stdout, useful, for instance, for generating flamegraphs.
380
381--inline::
382 If a callgraph address belongs to an inlined function, the inline stack
383 will be printed. Each entry has function name and file/line. Enabled by
384 default, disable with --no-inline.
385
386SEE ALSO
387--------
388linkperf:perf-record[1], linkperf:perf-script-perl[1],
389linkperf:perf-script-python[1]
1perf-script(1)
2=============
3
4NAME
5----
6perf-script - Read perf.data (created by perf record) and display trace output
7
8SYNOPSIS
9--------
10[verse]
11'perf script' [<options>]
12'perf script' [<options>] record <script> [<record-options>] <command>
13'perf script' [<options>] report <script> [script-args]
14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
15'perf script' [<options>] <top-script> [script-args]
16
17DESCRIPTION
18-----------
19This command reads the input file and displays the trace recorded.
20
21There are several variants of perf script:
22
23 'perf script' to see a detailed trace of the workload that was
24 recorded.
25
26 You can also run a set of pre-canned scripts that aggregate and
27 summarize the raw trace data in various ways (the list of scripts is
28 available via 'perf script -l'). The following variants allow you to
29 record and run those scripts:
30
31 'perf script record <script> <command>' to record the events required
32 for 'perf script report'. <script> is the name displayed in the
33 output of 'perf script --list' i.e. the actual script name minus any
34 language extension. If <command> is not specified, the events are
35 recorded using the -a (system-wide) 'perf record' option.
36
37 'perf script report <script> [args]' to run and display the results
38 of <script>. <script> is the name displayed in the output of 'perf
39 script --list' i.e. the actual script name minus any language
40 extension. The perf.data output from a previous run of 'perf script
41 record <script>' is used and should be present for this command to
42 succeed. [args] refers to the (mainly optional) args expected by
43 the script.
44
45 'perf script <script> <required-script-args> <command>' to both
46 record the events required for <script> and to run the <script>
47 using 'live-mode' i.e. without writing anything to disk. <script>
48 is the name displayed in the output of 'perf script --list' i.e. the
49 actual script name minus any language extension. If <command> is
50 not specified, the events are recorded using the -a (system-wide)
51 'perf record' option. If <script> has any required args, they
52 should be specified before <command>. This mode doesn't allow for
53 optional script args to be specified; if optional script args are
54 desired, they can be specified using separate 'perf script record'
55 and 'perf script report' commands, with the stdout of the record step
56 piped to the stdin of the report script, using the '-o -' and '-i -'
57 options of the corresponding commands.
58
59 'perf script <top-script>' to both record the events required for
60 <top-script> and to run the <top-script> using 'live-mode'
61 i.e. without writing anything to disk. <top-script> is the name
62 displayed in the output of 'perf script --list' i.e. the actual
63 script name minus any language extension; a <top-script> is defined
64 as any script name ending with the string 'top'.
65
66 [<record-options>] can be passed to the record steps of 'perf script
67 record' and 'live-mode' variants; this isn't possible however for
68 <top-script> 'live-mode' or 'perf script report' variants.
69
70 See the 'SEE ALSO' section for links to language-specific
71 information on how to write and run your own trace scripts.
72
73OPTIONS
74-------
75<command>...::
76 Any command you can specify in a shell.
77
78-D::
79--dump-raw-trace=::
80 Display verbose dump of the trace data.
81
82-L::
83--Latency=::
84 Show latency attributes (irqs/preemption disabled, etc).
85
86-l::
87--list=::
88 Display a list of available trace scripts.
89
90-s ['lang']::
91--script=::
92 Process trace data with the given script ([lang]:script[.ext]).
93 If the string 'lang' is specified in place of a script name, a
94 list of supported languages will be displayed instead.
95
96-g::
97--gen-script=::
98 Generate perf-script.[ext] starter script for given language,
99 using current perf.data.
100
101-a::
102 Force system-wide collection. Scripts run without a <command>
103 normally use -a by default, while scripts run with a <command>
104 normally don't - this option allows the latter to be run in
105 system-wide mode.
106
107-i::
108--input=::
109 Input file name. (default: perf.data unless stdin is a fifo)
110
111-d::
112--debug-mode::
113 Do various checks like samples ordering and lost events.
114
115-F::
116--fields::
117 Comma separated list of fields to print. Options are:
118 comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
119 srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output, brstackinsn,
120 brstackoff, callindent, insn, insnlen, synth, phys_addr, metric, misc, srccode, ipc.
121 Field list can be prepended with the type, trace, sw or hw,
122 to indicate to which event type the field list applies.
123 e.g., -F sw:comm,tid,time,ip,sym and -F trace:time,cpu,trace
124
125 perf script -F <fields>
126
127 is equivalent to:
128
129 perf script -F trace:<fields> -F sw:<fields> -F hw:<fields>
130
131 i.e., the specified fields apply to all event types if the type string
132 is not given.
133
134 In addition to overriding fields, it is also possible to add or remove
135 fields from the defaults. For example
136
137 -F -cpu,+insn
138
139 removes the cpu field and adds the insn field. Adding/removing fields
140 cannot be mixed with normal overriding.
141
142 The arguments are processed in the order received. A later usage can
143 reset a prior request. e.g.:
144
145 -F trace: -F comm,tid,time,ip,sym
146
147 The first -F suppresses trace events (field list is ""), but then the
148 second invocation sets the fields to comm,tid,time,ip,sym. In this case a
149 warning is given to the user:
150
151 "Overriding previous field request for all events."
152
153 Alternatively, consider the order:
154
155 -F comm,tid,time,ip,sym -F trace:
156
157 The first -F sets the fields for all events and the second -F
158 suppresses trace events. The user is given a warning message about
159 the override, and the result of the above is that only S/W and H/W
160 events are displayed with the given fields.
161
162 It's possible tp add/remove fields only for specific event type:
163
164 -Fsw:-cpu,-period
165
166 removes cpu and period from software events.
167
168 For the 'wildcard' option if a user selected field is invalid for an
169 event type, a message is displayed to the user that the option is
170 ignored for that type. For example:
171
172 $ perf script -F comm,tid,trace
173 'trace' not valid for hardware events. Ignoring.
174 'trace' not valid for software events. Ignoring.
175
176 Alternatively, if the type is given an invalid field is specified it
177 is an error. For example:
178
179 perf script -v -F sw:comm,tid,trace
180 'trace' not valid for software events.
181
182 At this point usage is displayed, and perf-script exits.
183
184 The flags field is synthesized and may have a value when Instruction
185 Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
186 call, return, conditional, system, asynchronous, interrupt,
187 transaction abort, trace begin, trace end, and in transaction,
188 respectively. Known combinations of flags are printed more nicely e.g.
189 "call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b",
190 "int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs",
191 "async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB",
192 "tr end" for "bE". However the "x" flag will be display separately in those
193 cases e.g. "jcc (x)" for a condition branch within a transaction.
194
195 The callindent field is synthesized and may have a value when
196 Instruction Trace decoding. For calls and returns, it will display the
197 name of the symbol indented with spaces to reflect the stack depth.
198
199 When doing instruction trace decoding insn and insnlen give the
200 instruction bytes and the instruction length of the current
201 instruction.
202
203 The synth field is used by synthesized events which may be created when
204 Instruction Trace decoding.
205
206 The ipc (instructions per cycle) field is synthesized and may have a value when
207 Instruction Trace decoding.
208
209 Finally, a user may not set fields to none for all event types.
210 i.e., -F "" is not allowed.
211
212 The brstack output includes branch related information with raw addresses using the
213 /v/v/v/v/cycles syntax in the following order:
214 FROM: branch source instruction
215 TO : branch target instruction
216 M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
217 X/- : X=branch inside a transactional region, -=not in transaction region or not supported
218 A/- : A=TSX abort entry, -=not aborted region or not supported
219 cycles
220
221 The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
222
223 When brstackinsn is specified the full assembler sequences of branch sequences for each sample
224 is printed. This is the full execution path leading to the sample. This is only supported when the
225 sample was recorded with perf record -b or -j any.
226
227 The brstackoff field will print an offset into a specific dso/binary.
228
229 With the metric option perf script can compute metrics for
230 sampling periods, similar to perf stat. This requires
231 specifying a group with multiple events defining metrics with the :S option
232 for perf record. perf will sample on the first event, and
233 print computed metrics for all the events in the group. Please note
234 that the metric computed is averaged over the whole sampling
235 period (since the last sample), not just for the sample point.
236
237 For sample events it's possible to display misc field with -F +misc option,
238 following letters are displayed for each bit:
239
240 PERF_RECORD_MISC_KERNEL K
241 PERF_RECORD_MISC_USER U
242 PERF_RECORD_MISC_HYPERVISOR H
243 PERF_RECORD_MISC_GUEST_KERNEL G
244 PERF_RECORD_MISC_GUEST_USER g
245 PERF_RECORD_MISC_MMAP_DATA* M
246 PERF_RECORD_MISC_COMM_EXEC E
247 PERF_RECORD_MISC_SWITCH_OUT S
248 PERF_RECORD_MISC_SWITCH_OUT_PREEMPT Sp
249
250 $ perf script -F +misc ...
251 sched-messaging 1414 K 28690.636582: 4590 cycles ...
252 sched-messaging 1407 U 28690.636600: 325620 cycles ...
253 sched-messaging 1414 K 28690.636608: 19473 cycles ...
254 misc field ___________/
255
256-k::
257--vmlinux=<file>::
258 vmlinux pathname
259
260--kallsyms=<file>::
261 kallsyms pathname
262
263--symfs=<directory>::
264 Look for files with symbols relative to this directory.
265
266-G::
267--hide-call-graph::
268 When printing symbols do not display call chain.
269
270--stop-bt::
271 Stop display of callgraph at these symbols
272
273-C::
274--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
275 be provided as a comma-separated list with no space: 0,1. Ranges of
276 CPUs are specified with -: 0-2. Default is to report samples on all
277 CPUs.
278
279-c::
280--comms=::
281 Only display events for these comms. CSV that understands
282 file://filename entries.
283
284--pid=::
285 Only show events for given process ID (comma separated list).
286
287--tid=::
288 Only show events for given thread ID (comma separated list).
289
290-I::
291--show-info::
292 Display extended information about the perf.data file. This adds
293 information which may be very large and thus may clutter the display.
294 It currently includes: cpu and numa topology of the host system.
295 It can only be used with the perf script report mode.
296
297--show-kernel-path::
298 Try to resolve the path of [kernel.kallsyms]
299
300--show-task-events
301 Display task related events (e.g. FORK, COMM, EXIT).
302
303--show-mmap-events
304 Display mmap related events (e.g. MMAP, MMAP2).
305
306--show-namespace-events
307 Display namespace events i.e. events of type PERF_RECORD_NAMESPACES.
308
309--show-switch-events
310 Display context switch events i.e. events of type PERF_RECORD_SWITCH or
311 PERF_RECORD_SWITCH_CPU_WIDE.
312
313--show-lost-events
314 Display lost events i.e. events of type PERF_RECORD_LOST.
315
316--show-round-events
317 Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND.
318
319--show-bpf-events
320 Display bpf events i.e. events of type PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT.
321
322--show-cgroup-events
323 Display cgroup events i.e. events of type PERF_RECORD_CGROUP.
324
325--show-text-poke-events
326 Display text poke events i.e. events of type PERF_RECORD_TEXT_POKE and
327 PERF_RECORD_KSYMBOL.
328
329--demangle::
330 Demangle symbol names to human readable form. It's enabled by default,
331 disable with --no-demangle.
332
333--demangle-kernel::
334 Demangle kernel symbol names to human readable form (for C++ kernels).
335
336--header
337 Show perf.data header.
338
339--header-only
340 Show only perf.data header.
341
342--itrace::
343 Options for decoding instruction tracing data. The options are:
344
345include::itrace.txt[]
346
347 To disable decoding entirely, use --no-itrace.
348
349--full-source-path::
350 Show the full path for source files for srcline output.
351
352--max-stack::
353 Set the stack depth limit when parsing the callchain, anything
354 beyond the specified depth will be ignored. This is a trade-off
355 between information loss and faster processing especially for
356 workloads that can have a very long callchain stack.
357 Note that when using the --itrace option the synthesized callchain size
358 will override this value if the synthesized callchain size is bigger.
359
360 Default: 127
361
362--ns::
363 Use 9 decimal places when displaying time (i.e. show the nanoseconds)
364
365-f::
366--force::
367 Don't do ownership validation.
368
369--time::
370 Only analyze samples within given time window: <start>,<stop>. Times
371 have the format seconds.nanoseconds. If start is not given (i.e. time
372 string is ',x.y') then analysis starts at the beginning of the file. If
373 stop time is not given (i.e. time string is 'x.y,') then analysis goes
374 to end of file. Multiple ranges can be separated by spaces, which
375 requires the argument to be quoted e.g. --time "1234.567,1234.789 1235,"
376
377 Also support time percent with multiple time ranges. Time string is
378 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
379
380 For example:
381 Select the second 10% time slice:
382 perf script --time 10%/2
383
384 Select from 0% to 10% time slice:
385 perf script --time 0%-10%
386
387 Select the first and second 10% time slices:
388 perf script --time 10%/1,10%/2
389
390 Select from 0% to 10% and 30% to 40% slices:
391 perf script --time 0%-10%,30%-40%
392
393--max-blocks::
394 Set the maximum number of program blocks to print with brstackinsn for
395 each sample.
396
397--reltime::
398 Print time stamps relative to trace start.
399
400--deltatime::
401 Print time stamps relative to previous event.
402
403--per-event-dump::
404 Create per event files with a "perf.data.EVENT.dump" name instead of
405 printing to stdout, useful, for instance, for generating flamegraphs.
406
407--inline::
408 If a callgraph address belongs to an inlined function, the inline stack
409 will be printed. Each entry has function name and file/line. Enabled by
410 default, disable with --no-inline.
411
412--insn-trace::
413 Show instruction stream for intel_pt traces. Combine with --xed to
414 show disassembly.
415
416--xed::
417 Run xed disassembler on output. Requires installing the xed disassembler.
418
419-S::
420--symbols=symbol[,symbol...]::
421 Only consider the listed symbols. Symbols are typically a name
422 but they may also be hexadecimal address.
423
424 For example, to select the symbol noploop or the address 0x4007a0:
425 perf script --symbols=noploop,0x4007a0
426
427--call-trace::
428 Show call stream for intel_pt traces. The CPUs are interleaved, but
429 can be filtered with -C.
430
431--call-ret-trace::
432 Show call and return stream for intel_pt traces.
433
434--graph-function::
435 For itrace only show specified functions and their callees for
436 itrace. Multiple functions can be separated by comma.
437
438--switch-on EVENT_NAME::
439 Only consider events after this event is found.
440
441--switch-off EVENT_NAME::
442 Stop considering events after this event is found.
443
444--show-on-off-events::
445 Show the --switch-on/off events too.
446
447--stitch-lbr::
448 Show callgraph with stitched LBRs, which may have more complete
449 callgraph. The perf.data file must have been obtained using
450 perf record --call-graph lbr.
451 Disabled by default. In common cases with call stack overflows,
452 it can recreate better call stacks than the default lbr call stack
453 output. But this approach is not full proof. There can be cases
454 where it creates incorrect call stacks from incorrect matches.
455 The known limitations include exception handing such as
456 setjmp/longjmp will have calls/returns not match.
457
458SEE ALSO
459--------
460linkperf:perf-record[1], linkperf:perf-script-perl[1],
461linkperf:perf-script-python[1], linkperf:perf-intel-pt[1]