Loading...
1perf-script(1)
2=============
3
4NAME
5----
6perf-script - Read perf.data (created by perf record) and display trace output
7
8SYNOPSIS
9--------
10[verse]
11'perf script' [<options>]
12'perf script' [<options>] record <script> [<record-options>] <command>
13'perf script' [<options>] report <script> [script-args]
14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
15'perf script' [<options>] <top-script> [script-args]
16
17DESCRIPTION
18-----------
19This command reads the input file and displays the trace recorded.
20
21There are several variants of perf script:
22
23 'perf script' to see a detailed trace of the workload that was
24 recorded.
25
26 You can also run a set of pre-canned scripts that aggregate and
27 summarize the raw trace data in various ways (the list of scripts is
28 available via 'perf script -l'). The following variants allow you to
29 record and run those scripts:
30
31 'perf script record <script> <command>' to record the events required
32 for 'perf script report'. <script> is the name displayed in the
33 output of 'perf script --list' i.e. the actual script name minus any
34 language extension. If <command> is not specified, the events are
35 recorded using the -a (system-wide) 'perf record' option.
36
37 'perf script report <script> [args]' to run and display the results
38 of <script>. <script> is the name displayed in the output of 'perf
39 script --list' i.e. the actual script name minus any language
40 extension. The perf.data output from a previous run of 'perf script
41 record <script>' is used and should be present for this command to
42 succeed. [args] refers to the (mainly optional) args expected by
43 the script.
44
45 'perf script <script> <required-script-args> <command>' to both
46 record the events required for <script> and to run the <script>
47 using 'live-mode' i.e. without writing anything to disk. <script>
48 is the name displayed in the output of 'perf script --list' i.e. the
49 actual script name minus any language extension. If <command> is
50 not specified, the events are recorded using the -a (system-wide)
51 'perf record' option. If <script> has any required args, they
52 should be specified before <command>. This mode doesn't allow for
53 optional script args to be specified; if optional script args are
54 desired, they can be specified using separate 'perf script record'
55 and 'perf script report' commands, with the stdout of the record step
56 piped to the stdin of the report script, using the '-o -' and '-i -'
57 options of the corresponding commands.
58
59 'perf script <top-script>' to both record the events required for
60 <top-script> and to run the <top-script> using 'live-mode'
61 i.e. without writing anything to disk. <top-script> is the name
62 displayed in the output of 'perf script --list' i.e. the actual
63 script name minus any language extension; a <top-script> is defined
64 as any script name ending with the string 'top'.
65
66 [<record-options>] can be passed to the record steps of 'perf script
67 record' and 'live-mode' variants; this isn't possible however for
68 <top-script> 'live-mode' or 'perf script report' variants.
69
70 See the 'SEE ALSO' section for links to language-specific
71 information on how to write and run your own trace scripts.
72
73OPTIONS
74-------
75<command>...::
76 Any command you can specify in a shell.
77
78-D::
79--dump-raw-trace=::
80 Display verbose dump of the trace data.
81
82-L::
83--Latency=::
84 Show latency attributes (irqs/preemption disabled, etc).
85
86-l::
87--list=::
88 Display a list of available trace scripts.
89
90-s ['lang']::
91--script=::
92 Process trace data with the given script ([lang]:script[.ext]).
93 If the string 'lang' is specified in place of a script name, a
94 list of supported languages will be displayed instead.
95
96-g::
97--gen-script=::
98 Generate perf-script.[ext] starter script for given language,
99 using current perf.data.
100
101-a::
102 Force system-wide collection. Scripts run without a <command>
103 normally use -a by default, while scripts run with a <command>
104 normally don't - this option allows the latter to be run in
105 system-wide mode.
106
107-i::
108--input=::
109 Input file name. (default: perf.data unless stdin is a fifo)
110
111-d::
112--debug-mode::
113 Do various checks like samples ordering and lost events.
114
115-F::
116--fields::
117 Comma separated list of fields to print. Options are:
118 comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
119 srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output, brstackinsn,
120 brstackoff, callindent, insn, insnlen, synth, phys_addr, metric, misc.
121 Field list can be prepended with the type, trace, sw or hw,
122 to indicate to which event type the field list applies.
123 e.g., -F sw:comm,tid,time,ip,sym and -F trace:time,cpu,trace
124
125 perf script -F <fields>
126
127 is equivalent to:
128
129 perf script -F trace:<fields> -F sw:<fields> -F hw:<fields>
130
131 i.e., the specified fields apply to all event types if the type string
132 is not given.
133
134 In addition to overriding fields, it is also possible to add or remove
135 fields from the defaults. For example
136
137 -F -cpu,+insn
138
139 removes the cpu field and adds the insn field. Adding/removing fields
140 cannot be mixed with normal overriding.
141
142 The arguments are processed in the order received. A later usage can
143 reset a prior request. e.g.:
144
145 -F trace: -F comm,tid,time,ip,sym
146
147 The first -F suppresses trace events (field list is ""), but then the
148 second invocation sets the fields to comm,tid,time,ip,sym. In this case a
149 warning is given to the user:
150
151 "Overriding previous field request for all events."
152
153 Alternatively, consider the order:
154
155 -F comm,tid,time,ip,sym -F trace:
156
157 The first -F sets the fields for all events and the second -F
158 suppresses trace events. The user is given a warning message about
159 the override, and the result of the above is that only S/W and H/W
160 events are displayed with the given fields.
161
162 For the 'wildcard' option if a user selected field is invalid for an
163 event type, a message is displayed to the user that the option is
164 ignored for that type. For example:
165
166 $ perf script -F comm,tid,trace
167 'trace' not valid for hardware events. Ignoring.
168 'trace' not valid for software events. Ignoring.
169
170 Alternatively, if the type is given an invalid field is specified it
171 is an error. For example:
172
173 perf script -v -F sw:comm,tid,trace
174 'trace' not valid for software events.
175
176 At this point usage is displayed, and perf-script exits.
177
178 The flags field is synthesized and may have a value when Instruction
179 Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
180 call, return, conditional, system, asynchronous, interrupt,
181 transaction abort, trace begin, trace end, and in transaction,
182 respectively. Known combinations of flags are printed more nicely e.g.
183 "call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b",
184 "int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs",
185 "async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB",
186 "tr end" for "bE". However the "x" flag will be display separately in those
187 cases e.g. "jcc (x)" for a condition branch within a transaction.
188
189 The callindent field is synthesized and may have a value when
190 Instruction Trace decoding. For calls and returns, it will display the
191 name of the symbol indented with spaces to reflect the stack depth.
192
193 When doing instruction trace decoding insn and insnlen give the
194 instruction bytes and the instruction length of the current
195 instruction.
196
197 The synth field is used by synthesized events which may be created when
198 Instruction Trace decoding.
199
200 Finally, a user may not set fields to none for all event types.
201 i.e., -F "" is not allowed.
202
203 The brstack output includes branch related information with raw addresses using the
204 /v/v/v/v/cycles syntax in the following order:
205 FROM: branch source instruction
206 TO : branch target instruction
207 M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
208 X/- : X=branch inside a transactional region, -=not in transaction region or not supported
209 A/- : A=TSX abort entry, -=not aborted region or not supported
210 cycles
211
212 The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
213
214 When brstackinsn is specified the full assembler sequences of branch sequences for each sample
215 is printed. This is the full execution path leading to the sample. This is only supported when the
216 sample was recorded with perf record -b or -j any.
217
218 The brstackoff field will print an offset into a specific dso/binary.
219
220 With the metric option perf script can compute metrics for
221 sampling periods, similar to perf stat. This requires
222 specifying a group with multiple metrics with the :S option
223 for perf record. perf will sample on the first event, and
224 compute metrics for all the events in the group. Please note
225 that the metric computed is averaged over the whole sampling
226 period, not just for the sample point.
227
228 For sample events it's possible to display misc field with -F +misc option,
229 following letters are displayed for each bit:
230
231 PERF_RECORD_MISC_KERNEL K
232 PERF_RECORD_MISC_USER U
233 PERF_RECORD_MISC_HYPERVISOR H
234 PERF_RECORD_MISC_GUEST_KERNEL G
235 PERF_RECORD_MISC_GUEST_USER g
236 PERF_RECORD_MISC_MMAP_DATA* M
237 PERF_RECORD_MISC_COMM_EXEC E
238 PERF_RECORD_MISC_SWITCH_OUT S
239 PERF_RECORD_MISC_SWITCH_OUT_PREEMPT Sp
240
241 $ perf script -F +misc ...
242 sched-messaging 1414 K 28690.636582: 4590 cycles ...
243 sched-messaging 1407 U 28690.636600: 325620 cycles ...
244 sched-messaging 1414 K 28690.636608: 19473 cycles ...
245 misc field ___________/
246
247-k::
248--vmlinux=<file>::
249 vmlinux pathname
250
251--kallsyms=<file>::
252 kallsyms pathname
253
254--symfs=<directory>::
255 Look for files with symbols relative to this directory.
256
257-G::
258--hide-call-graph::
259 When printing symbols do not display call chain.
260
261--stop-bt::
262 Stop display of callgraph at these symbols
263
264-C::
265--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
266 be provided as a comma-separated list with no space: 0,1. Ranges of
267 CPUs are specified with -: 0-2. Default is to report samples on all
268 CPUs.
269
270-c::
271--comms=::
272 Only display events for these comms. CSV that understands
273 file://filename entries.
274
275--pid=::
276 Only show events for given process ID (comma separated list).
277
278--tid=::
279 Only show events for given thread ID (comma separated list).
280
281-I::
282--show-info::
283 Display extended information about the perf.data file. This adds
284 information which may be very large and thus may clutter the display.
285 It currently includes: cpu and numa topology of the host system.
286 It can only be used with the perf script report mode.
287
288--show-kernel-path::
289 Try to resolve the path of [kernel.kallsyms]
290
291--show-task-events
292 Display task related events (e.g. FORK, COMM, EXIT).
293
294--show-mmap-events
295 Display mmap related events (e.g. MMAP, MMAP2).
296
297--show-namespace-events
298 Display namespace events i.e. events of type PERF_RECORD_NAMESPACES.
299
300--show-switch-events
301 Display context switch events i.e. events of type PERF_RECORD_SWITCH or
302 PERF_RECORD_SWITCH_CPU_WIDE.
303
304--show-lost-events
305 Display lost events i.e. events of type PERF_RECORD_LOST.
306
307--show-round-events
308 Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND.
309
310--demangle::
311 Demangle symbol names to human readable form. It's enabled by default,
312 disable with --no-demangle.
313
314--demangle-kernel::
315 Demangle kernel symbol names to human readable form (for C++ kernels).
316
317--header
318 Show perf.data header.
319
320--header-only
321 Show only perf.data header.
322
323--itrace::
324 Options for decoding instruction tracing data. The options are:
325
326include::itrace.txt[]
327
328 To disable decoding entirely, use --no-itrace.
329
330--full-source-path::
331 Show the full path for source files for srcline output.
332
333--max-stack::
334 Set the stack depth limit when parsing the callchain, anything
335 beyond the specified depth will be ignored. This is a trade-off
336 between information loss and faster processing especially for
337 workloads that can have a very long callchain stack.
338 Note that when using the --itrace option the synthesized callchain size
339 will override this value if the synthesized callchain size is bigger.
340
341 Default: 127
342
343--ns::
344 Use 9 decimal places when displaying time (i.e. show the nanoseconds)
345
346-f::
347--force::
348 Don't do ownership validation.
349
350--time::
351 Only analyze samples within given time window: <start>,<stop>. Times
352 have the format seconds.microseconds. If start is not given (i.e., time
353 string is ',x.y') then analysis starts at the beginning of the file. If
354 stop time is not given (i.e, time string is 'x.y,') then analysis goes
355 to end of file.
356
357 Also support time percent with multipe time range. Time string is
358 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
359
360 For example:
361 Select the second 10% time slice:
362 perf script --time 10%/2
363
364 Select from 0% to 10% time slice:
365 perf script --time 0%-10%
366
367 Select the first and second 10% time slices:
368 perf script --time 10%/1,10%/2
369
370 Select from 0% to 10% and 30% to 40% slices:
371 perf script --time 0%-10%,30%-40%
372
373--max-blocks::
374 Set the maximum number of program blocks to print with brstackasm for
375 each sample.
376
377--per-event-dump::
378 Create per event files with a "perf.data.EVENT.dump" name instead of
379 printing to stdout, useful, for instance, for generating flamegraphs.
380
381--inline::
382 If a callgraph address belongs to an inlined function, the inline stack
383 will be printed. Each entry has function name and file/line. Enabled by
384 default, disable with --no-inline.
385
386SEE ALSO
387--------
388linkperf:perf-record[1], linkperf:perf-script-perl[1],
389linkperf:perf-script-python[1]
1perf-script(1)
2=============
3
4NAME
5----
6perf-script - Read perf.data (created by perf record) and display trace output
7
8SYNOPSIS
9--------
10[verse]
11'perf script' [<options>]
12'perf script' [<options>] record <script> [<record-options>] <command>
13'perf script' [<options>] report <script> [script-args]
14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
15'perf script' [<options>] <top-script> [script-args]
16
17DESCRIPTION
18-----------
19This command reads the input file and displays the trace recorded.
20
21There are several variants of perf script:
22
23 'perf script' to see a detailed trace of the workload that was
24 recorded.
25
26 You can also run a set of pre-canned scripts that aggregate and
27 summarize the raw trace data in various ways (the list of scripts is
28 available via 'perf script -l'). The following variants allow you to
29 record and run those scripts:
30
31 'perf script record <script> <command>' to record the events required
32 for 'perf script report'. <script> is the name displayed in the
33 output of 'perf script --list' i.e. the actual script name minus any
34 language extension. If <command> is not specified, the events are
35 recorded using the -a (system-wide) 'perf record' option.
36
37 'perf script report <script> [args]' to run and display the results
38 of <script>. <script> is the name displayed in the output of 'perf
39 script --list' i.e. the actual script name minus any language
40 extension. The perf.data output from a previous run of 'perf script
41 record <script>' is used and should be present for this command to
42 succeed. [args] refers to the (mainly optional) args expected by
43 the script.
44
45 'perf script <script> <required-script-args> <command>' to both
46 record the events required for <script> and to run the <script>
47 using 'live-mode' i.e. without writing anything to disk. <script>
48 is the name displayed in the output of 'perf script --list' i.e. the
49 actual script name minus any language extension. If <command> is
50 not specified, the events are recorded using the -a (system-wide)
51 'perf record' option. If <script> has any required args, they
52 should be specified before <command>. This mode doesn't allow for
53 optional script args to be specified; if optional script args are
54 desired, they can be specified using separate 'perf script record'
55 and 'perf script report' commands, with the stdout of the record step
56 piped to the stdin of the report script, using the '-o -' and '-i -'
57 options of the corresponding commands.
58
59 'perf script <top-script>' to both record the events required for
60 <top-script> and to run the <top-script> using 'live-mode'
61 i.e. without writing anything to disk. <top-script> is the name
62 displayed in the output of 'perf script --list' i.e. the actual
63 script name minus any language extension; a <top-script> is defined
64 as any script name ending with the string 'top'.
65
66 [<record-options>] can be passed to the record steps of 'perf script
67 record' and 'live-mode' variants; this isn't possible however for
68 <top-script> 'live-mode' or 'perf script report' variants.
69
70 See the 'SEE ALSO' section for links to language-specific
71 information on how to write and run your own trace scripts.
72
73OPTIONS
74-------
75<command>...::
76 Any command you can specify in a shell.
77
78-D::
79--dump-raw-trace=::
80 Display verbose dump of the trace data.
81
82-L::
83--Latency=::
84 Show latency attributes (irqs/preemption disabled, etc).
85
86-l::
87--list=::
88 Display a list of available trace scripts.
89
90-s ['lang']::
91--script=::
92 Process trace data with the given script ([lang]:script[.ext]).
93 If the string 'lang' is specified in place of a script name, a
94 list of supported languages will be displayed instead.
95
96-g::
97--gen-script=::
98 Generate perf-script.[ext] starter script for given language,
99 using current perf.data.
100
101--dlfilter=<file>::
102 Filter sample events using the given shared object file.
103 Refer linkperf:perf-dlfilter[1]
104
105--dlarg=<arg>::
106 Pass 'arg' as an argument to the dlfilter. --dlarg may be repeated
107 to add more arguments.
108
109--list-dlfilters=::
110 Display a list of available dlfilters. Use with option -v (must come
111 before option --list-dlfilters) to show long descriptions.
112
113-a::
114 Force system-wide collection. Scripts run without a <command>
115 normally use -a by default, while scripts run with a <command>
116 normally don't - this option allows the latter to be run in
117 system-wide mode.
118
119-i::
120--input=::
121 Input file name. (default: perf.data unless stdin is a fifo)
122
123-d::
124--debug-mode::
125 Do various checks like samples ordering and lost events.
126
127-F::
128--fields::
129 Comma separated list of fields to print. Options are:
130 comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
131 srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output,
132 brstackinsn, brstackoff, callindent, insn, insnlen, synth, phys_addr,
133 metric, misc, srccode, ipc, data_page_size, code_page_size.
134 Field list can be prepended with the type, trace, sw or hw,
135 to indicate to which event type the field list applies.
136 e.g., -F sw:comm,tid,time,ip,sym and -F trace:time,cpu,trace
137
138 perf script -F <fields>
139
140 is equivalent to:
141
142 perf script -F trace:<fields> -F sw:<fields> -F hw:<fields>
143
144 i.e., the specified fields apply to all event types if the type string
145 is not given.
146
147 In addition to overriding fields, it is also possible to add or remove
148 fields from the defaults. For example
149
150 -F -cpu,+insn
151
152 removes the cpu field and adds the insn field. Adding/removing fields
153 cannot be mixed with normal overriding.
154
155 The arguments are processed in the order received. A later usage can
156 reset a prior request. e.g.:
157
158 -F trace: -F comm,tid,time,ip,sym
159
160 The first -F suppresses trace events (field list is ""), but then the
161 second invocation sets the fields to comm,tid,time,ip,sym. In this case a
162 warning is given to the user:
163
164 "Overriding previous field request for all events."
165
166 Alternatively, consider the order:
167
168 -F comm,tid,time,ip,sym -F trace:
169
170 The first -F sets the fields for all events and the second -F
171 suppresses trace events. The user is given a warning message about
172 the override, and the result of the above is that only S/W and H/W
173 events are displayed with the given fields.
174
175 It's possible tp add/remove fields only for specific event type:
176
177 -Fsw:-cpu,-period
178
179 removes cpu and period from software events.
180
181 For the 'wildcard' option if a user selected field is invalid for an
182 event type, a message is displayed to the user that the option is
183 ignored for that type. For example:
184
185 $ perf script -F comm,tid,trace
186 'trace' not valid for hardware events. Ignoring.
187 'trace' not valid for software events. Ignoring.
188
189 Alternatively, if the type is given an invalid field is specified it
190 is an error. For example:
191
192 perf script -v -F sw:comm,tid,trace
193 'trace' not valid for software events.
194
195 At this point usage is displayed, and perf-script exits.
196
197 The flags field is synthesized and may have a value when Instruction
198 Trace decoding. The flags are "bcrosyiABExgh" which stand for branch,
199 call, return, conditional, system, asynchronous, interrupt,
200 transaction abort, trace begin, trace end, in transaction, VM-Entry, and VM-Exit
201 respectively. Known combinations of flags are printed more nicely e.g.
202 "call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b",
203 "int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs",
204 "async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB",
205 "tr end" for "bE", "vmentry" for "bcg", "vmexit" for "bch".
206 However the "x" flag will be displayed separately in those
207 cases e.g. "jcc (x)" for a condition branch within a transaction.
208
209 The callindent field is synthesized and may have a value when
210 Instruction Trace decoding. For calls and returns, it will display the
211 name of the symbol indented with spaces to reflect the stack depth.
212
213 When doing instruction trace decoding insn and insnlen give the
214 instruction bytes and the instruction length of the current
215 instruction.
216
217 The synth field is used by synthesized events which may be created when
218 Instruction Trace decoding.
219
220 The ipc (instructions per cycle) field is synthesized and may have a value when
221 Instruction Trace decoding.
222
223 Finally, a user may not set fields to none for all event types.
224 i.e., -F "" is not allowed.
225
226 The brstack output includes branch related information with raw addresses using the
227 /v/v/v/v/cycles syntax in the following order:
228 FROM: branch source instruction
229 TO : branch target instruction
230 M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
231 X/- : X=branch inside a transactional region, -=not in transaction region or not supported
232 A/- : A=TSX abort entry, -=not aborted region or not supported
233 cycles
234
235 The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
236
237 When brstackinsn is specified the full assembler sequences of branch sequences for each sample
238 is printed. This is the full execution path leading to the sample. This is only supported when the
239 sample was recorded with perf record -b or -j any.
240
241 The brstackoff field will print an offset into a specific dso/binary.
242
243 With the metric option perf script can compute metrics for
244 sampling periods, similar to perf stat. This requires
245 specifying a group with multiple events defining metrics with the :S option
246 for perf record. perf will sample on the first event, and
247 print computed metrics for all the events in the group. Please note
248 that the metric computed is averaged over the whole sampling
249 period (since the last sample), not just for the sample point.
250
251 For sample events it's possible to display misc field with -F +misc option,
252 following letters are displayed for each bit:
253
254 PERF_RECORD_MISC_KERNEL K
255 PERF_RECORD_MISC_USER U
256 PERF_RECORD_MISC_HYPERVISOR H
257 PERF_RECORD_MISC_GUEST_KERNEL G
258 PERF_RECORD_MISC_GUEST_USER g
259 PERF_RECORD_MISC_MMAP_DATA* M
260 PERF_RECORD_MISC_COMM_EXEC E
261 PERF_RECORD_MISC_SWITCH_OUT S
262 PERF_RECORD_MISC_SWITCH_OUT_PREEMPT Sp
263
264 $ perf script -F +misc ...
265 sched-messaging 1414 K 28690.636582: 4590 cycles ...
266 sched-messaging 1407 U 28690.636600: 325620 cycles ...
267 sched-messaging 1414 K 28690.636608: 19473 cycles ...
268 misc field ___________/
269
270-k::
271--vmlinux=<file>::
272 vmlinux pathname
273
274--kallsyms=<file>::
275 kallsyms pathname
276
277--symfs=<directory>::
278 Look for files with symbols relative to this directory.
279
280-G::
281--hide-call-graph::
282 When printing symbols do not display call chain.
283
284--stop-bt::
285 Stop display of callgraph at these symbols
286
287-C::
288--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
289 be provided as a comma-separated list with no space: 0,1. Ranges of
290 CPUs are specified with -: 0-2. Default is to report samples on all
291 CPUs.
292
293-c::
294--comms=::
295 Only display events for these comms. CSV that understands
296 file://filename entries.
297
298--pid=::
299 Only show events for given process ID (comma separated list).
300
301--tid=::
302 Only show events for given thread ID (comma separated list).
303
304-I::
305--show-info::
306 Display extended information about the perf.data file. This adds
307 information which may be very large and thus may clutter the display.
308 It currently includes: cpu and numa topology of the host system.
309 It can only be used with the perf script report mode.
310
311--show-kernel-path::
312 Try to resolve the path of [kernel.kallsyms]
313
314--show-task-events
315 Display task related events (e.g. FORK, COMM, EXIT).
316
317--show-mmap-events
318 Display mmap related events (e.g. MMAP, MMAP2).
319
320--show-namespace-events
321 Display namespace events i.e. events of type PERF_RECORD_NAMESPACES.
322
323--show-switch-events
324 Display context switch events i.e. events of type PERF_RECORD_SWITCH or
325 PERF_RECORD_SWITCH_CPU_WIDE.
326
327--show-lost-events
328 Display lost events i.e. events of type PERF_RECORD_LOST.
329
330--show-round-events
331 Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND.
332
333--show-bpf-events
334 Display bpf events i.e. events of type PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT.
335
336--show-cgroup-events
337 Display cgroup events i.e. events of type PERF_RECORD_CGROUP.
338
339--show-text-poke-events
340 Display text poke events i.e. events of type PERF_RECORD_TEXT_POKE and
341 PERF_RECORD_KSYMBOL.
342
343--demangle::
344 Demangle symbol names to human readable form. It's enabled by default,
345 disable with --no-demangle.
346
347--demangle-kernel::
348 Demangle kernel symbol names to human readable form (for C++ kernels).
349
350--header
351 Show perf.data header.
352
353--header-only
354 Show only perf.data header.
355
356--itrace::
357 Options for decoding instruction tracing data. The options are:
358
359include::itrace.txt[]
360
361 To disable decoding entirely, use --no-itrace.
362
363--full-source-path::
364 Show the full path for source files for srcline output.
365
366--max-stack::
367 Set the stack depth limit when parsing the callchain, anything
368 beyond the specified depth will be ignored. This is a trade-off
369 between information loss and faster processing especially for
370 workloads that can have a very long callchain stack.
371 Note that when using the --itrace option the synthesized callchain size
372 will override this value if the synthesized callchain size is bigger.
373
374 Default: 127
375
376--ns::
377 Use 9 decimal places when displaying time (i.e. show the nanoseconds)
378
379-f::
380--force::
381 Don't do ownership validation.
382
383--time::
384 Only analyze samples within given time window: <start>,<stop>. Times
385 have the format seconds.nanoseconds. If start is not given (i.e. time
386 string is ',x.y') then analysis starts at the beginning of the file. If
387 stop time is not given (i.e. time string is 'x.y,') then analysis goes
388 to end of file. Multiple ranges can be separated by spaces, which
389 requires the argument to be quoted e.g. --time "1234.567,1234.789 1235,"
390
391 Also support time percent with multiple time ranges. Time string is
392 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
393
394 For example:
395 Select the second 10% time slice:
396 perf script --time 10%/2
397
398 Select from 0% to 10% time slice:
399 perf script --time 0%-10%
400
401 Select the first and second 10% time slices:
402 perf script --time 10%/1,10%/2
403
404 Select from 0% to 10% and 30% to 40% slices:
405 perf script --time 0%-10%,30%-40%
406
407--max-blocks::
408 Set the maximum number of program blocks to print with brstackinsn for
409 each sample.
410
411--reltime::
412 Print time stamps relative to trace start.
413
414--deltatime::
415 Print time stamps relative to previous event.
416
417--per-event-dump::
418 Create per event files with a "perf.data.EVENT.dump" name instead of
419 printing to stdout, useful, for instance, for generating flamegraphs.
420
421--inline::
422 If a callgraph address belongs to an inlined function, the inline stack
423 will be printed. Each entry has function name and file/line. Enabled by
424 default, disable with --no-inline.
425
426--insn-trace::
427 Show instruction stream for intel_pt traces. Combine with --xed to
428 show disassembly.
429
430--xed::
431 Run xed disassembler on output. Requires installing the xed disassembler.
432
433-S::
434--symbols=symbol[,symbol...]::
435 Only consider the listed symbols. Symbols are typically a name
436 but they may also be hexadecimal address.
437
438 The hexadecimal address may be the start address of a symbol or
439 any other address to filter the trace records
440
441 For example, to select the symbol noploop or the address 0x4007a0:
442 perf script --symbols=noploop,0x4007a0
443
444 Support filtering trace records by symbol name, start address of
445 symbol, any hexadecimal address and address range.
446
447 The comparison order is:
448
449 1. symbol name comparison
450 2. symbol start address comparison.
451 3. any hexadecimal address comparison.
452 4. address range comparison (see --addr-range).
453
454--addr-range::
455 Use with -S or --symbols to list traced records within address range.
456
457 For example, to list the traced records within the address range
458 [0x4007a0, 0x0x4007a9]:
459 perf script -S 0x4007a0 --addr-range 10
460
461--dsos=::
462 Only consider symbols in these DSOs.
463
464--call-trace::
465 Show call stream for intel_pt traces. The CPUs are interleaved, but
466 can be filtered with -C.
467
468--call-ret-trace::
469 Show call and return stream for intel_pt traces.
470
471--graph-function::
472 For itrace only show specified functions and their callees for
473 itrace. Multiple functions can be separated by comma.
474
475--switch-on EVENT_NAME::
476 Only consider events after this event is found.
477
478--switch-off EVENT_NAME::
479 Stop considering events after this event is found.
480
481--show-on-off-events::
482 Show the --switch-on/off events too.
483
484--stitch-lbr::
485 Show callgraph with stitched LBRs, which may have more complete
486 callgraph. The perf.data file must have been obtained using
487 perf record --call-graph lbr.
488 Disabled by default. In common cases with call stack overflows,
489 it can recreate better call stacks than the default lbr call stack
490 output. But this approach is not full proof. There can be cases
491 where it creates incorrect call stacks from incorrect matches.
492 The known limitations include exception handing such as
493 setjmp/longjmp will have calls/returns not match.
494
495SEE ALSO
496--------
497linkperf:perf-record[1], linkperf:perf-script-perl[1],
498linkperf:perf-script-python[1], linkperf:perf-intel-pt[1],
499linkperf:perf-dlfilter[1]