Loading...
1/*
2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41#include <linux/slab.h>
42#include "pm8001_sas.h"
43#include "pm8001_chips.h"
44
45static struct scsi_transport_template *pm8001_stt;
46
47/**
48 * chip info structure to identify chip key functionality as
49 * encryption available/not, no of ports, hw specific function ref
50 */
51static const struct pm8001_chip_info pm8001_chips[] = {
52 [chip_8001] = {0, 8, &pm8001_8001_dispatch,},
53 [chip_8008] = {0, 8, &pm8001_80xx_dispatch,},
54 [chip_8009] = {1, 8, &pm8001_80xx_dispatch,},
55 [chip_8018] = {0, 16, &pm8001_80xx_dispatch,},
56 [chip_8019] = {1, 16, &pm8001_80xx_dispatch,},
57 [chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
58 [chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
59 [chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
60 [chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
61 [chip_8070] = {0, 8, &pm8001_80xx_dispatch,},
62 [chip_8072] = {0, 16, &pm8001_80xx_dispatch,},
63};
64static int pm8001_id;
65
66LIST_HEAD(hba_list);
67
68struct workqueue_struct *pm8001_wq;
69
70/**
71 * The main structure which LLDD must register for scsi core.
72 */
73static struct scsi_host_template pm8001_sht = {
74 .module = THIS_MODULE,
75 .name = DRV_NAME,
76 .queuecommand = sas_queuecommand,
77 .target_alloc = sas_target_alloc,
78 .slave_configure = sas_slave_configure,
79 .scan_finished = pm8001_scan_finished,
80 .scan_start = pm8001_scan_start,
81 .change_queue_depth = sas_change_queue_depth,
82 .bios_param = sas_bios_param,
83 .can_queue = 1,
84 .this_id = -1,
85 .sg_tablesize = SG_ALL,
86 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
87 .use_clustering = ENABLE_CLUSTERING,
88 .eh_device_reset_handler = sas_eh_device_reset_handler,
89 .eh_bus_reset_handler = sas_eh_bus_reset_handler,
90 .target_destroy = sas_target_destroy,
91 .ioctl = sas_ioctl,
92 .shost_attrs = pm8001_host_attrs,
93 .track_queue_depth = 1,
94};
95
96/**
97 * Sas layer call this function to execute specific task.
98 */
99static struct sas_domain_function_template pm8001_transport_ops = {
100 .lldd_dev_found = pm8001_dev_found,
101 .lldd_dev_gone = pm8001_dev_gone,
102
103 .lldd_execute_task = pm8001_queue_command,
104 .lldd_control_phy = pm8001_phy_control,
105
106 .lldd_abort_task = pm8001_abort_task,
107 .lldd_abort_task_set = pm8001_abort_task_set,
108 .lldd_clear_aca = pm8001_clear_aca,
109 .lldd_clear_task_set = pm8001_clear_task_set,
110 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
111 .lldd_lu_reset = pm8001_lu_reset,
112 .lldd_query_task = pm8001_query_task,
113};
114
115/**
116 *pm8001_phy_init - initiate our adapter phys
117 *@pm8001_ha: our hba structure.
118 *@phy_id: phy id.
119 */
120static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
121{
122 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
123 struct asd_sas_phy *sas_phy = &phy->sas_phy;
124 phy->phy_state = 0;
125 phy->pm8001_ha = pm8001_ha;
126 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
127 sas_phy->class = SAS;
128 sas_phy->iproto = SAS_PROTOCOL_ALL;
129 sas_phy->tproto = 0;
130 sas_phy->type = PHY_TYPE_PHYSICAL;
131 sas_phy->role = PHY_ROLE_INITIATOR;
132 sas_phy->oob_mode = OOB_NOT_CONNECTED;
133 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
134 sas_phy->id = phy_id;
135 sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
136 sas_phy->frame_rcvd = &phy->frame_rcvd[0];
137 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
138 sas_phy->lldd_phy = phy;
139}
140
141/**
142 *pm8001_free - free hba
143 *@pm8001_ha: our hba structure.
144 *
145 */
146static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
147{
148 int i;
149
150 if (!pm8001_ha)
151 return;
152
153 for (i = 0; i < USI_MAX_MEMCNT; i++) {
154 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
155 pci_free_consistent(pm8001_ha->pdev,
156 (pm8001_ha->memoryMap.region[i].total_len +
157 pm8001_ha->memoryMap.region[i].alignment),
158 pm8001_ha->memoryMap.region[i].virt_ptr,
159 pm8001_ha->memoryMap.region[i].phys_addr);
160 }
161 }
162 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
163 if (pm8001_ha->shost)
164 scsi_host_put(pm8001_ha->shost);
165 flush_workqueue(pm8001_wq);
166 kfree(pm8001_ha->tags);
167 kfree(pm8001_ha);
168}
169
170#ifdef PM8001_USE_TASKLET
171
172/**
173 * tasklet for 64 msi-x interrupt handler
174 * @opaque: the passed general host adapter struct
175 * Note: pm8001_tasklet is common for pm8001 & pm80xx
176 */
177static void pm8001_tasklet(unsigned long opaque)
178{
179 struct pm8001_hba_info *pm8001_ha;
180 struct isr_param *irq_vector;
181
182 irq_vector = (struct isr_param *)opaque;
183 pm8001_ha = irq_vector->drv_inst;
184 if (unlikely(!pm8001_ha))
185 BUG_ON(1);
186 PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
187}
188#endif
189
190/**
191 * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
192 * It obtains the vector number and calls the equivalent bottom
193 * half or services directly.
194 * @opaque: the passed outbound queue/vector. Host structure is
195 * retrieved from the same.
196 */
197static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
198{
199 struct isr_param *irq_vector;
200 struct pm8001_hba_info *pm8001_ha;
201 irqreturn_t ret = IRQ_HANDLED;
202 irq_vector = (struct isr_param *)opaque;
203 pm8001_ha = irq_vector->drv_inst;
204
205 if (unlikely(!pm8001_ha))
206 return IRQ_NONE;
207 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
208 return IRQ_NONE;
209#ifdef PM8001_USE_TASKLET
210 tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
211#else
212 ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
213#endif
214 return ret;
215}
216
217/**
218 * pm8001_interrupt_handler_intx - main INTx interrupt handler.
219 * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
220 */
221
222static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
223{
224 struct pm8001_hba_info *pm8001_ha;
225 irqreturn_t ret = IRQ_HANDLED;
226 struct sas_ha_struct *sha = dev_id;
227 pm8001_ha = sha->lldd_ha;
228 if (unlikely(!pm8001_ha))
229 return IRQ_NONE;
230 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
231 return IRQ_NONE;
232
233#ifdef PM8001_USE_TASKLET
234 tasklet_schedule(&pm8001_ha->tasklet[0]);
235#else
236 ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
237#endif
238 return ret;
239}
240
241/**
242 * pm8001_alloc - initiate our hba structure and 6 DMAs area.
243 * @pm8001_ha:our hba structure.
244 *
245 */
246static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
247 const struct pci_device_id *ent)
248{
249 int i;
250 spin_lock_init(&pm8001_ha->lock);
251 spin_lock_init(&pm8001_ha->bitmap_lock);
252 PM8001_INIT_DBG(pm8001_ha,
253 pm8001_printk("pm8001_alloc: PHY:%x\n",
254 pm8001_ha->chip->n_phy));
255 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
256 pm8001_phy_init(pm8001_ha, i);
257 pm8001_ha->port[i].wide_port_phymap = 0;
258 pm8001_ha->port[i].port_attached = 0;
259 pm8001_ha->port[i].port_state = 0;
260 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
261 }
262
263 pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
264 if (!pm8001_ha->tags)
265 goto err_out;
266 /* MPI Memory region 1 for AAP Event Log for fw */
267 pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
268 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
269 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
270 pm8001_ha->memoryMap.region[AAP1].alignment = 32;
271
272 /* MPI Memory region 2 for IOP Event Log for fw */
273 pm8001_ha->memoryMap.region[IOP].num_elements = 1;
274 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
275 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
276 pm8001_ha->memoryMap.region[IOP].alignment = 32;
277
278 for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
279 /* MPI Memory region 3 for consumer Index of inbound queues */
280 pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
281 pm8001_ha->memoryMap.region[CI+i].element_size = 4;
282 pm8001_ha->memoryMap.region[CI+i].total_len = 4;
283 pm8001_ha->memoryMap.region[CI+i].alignment = 4;
284
285 if ((ent->driver_data) != chip_8001) {
286 /* MPI Memory region 5 inbound queues */
287 pm8001_ha->memoryMap.region[IB+i].num_elements =
288 PM8001_MPI_QUEUE;
289 pm8001_ha->memoryMap.region[IB+i].element_size = 128;
290 pm8001_ha->memoryMap.region[IB+i].total_len =
291 PM8001_MPI_QUEUE * 128;
292 pm8001_ha->memoryMap.region[IB+i].alignment = 128;
293 } else {
294 pm8001_ha->memoryMap.region[IB+i].num_elements =
295 PM8001_MPI_QUEUE;
296 pm8001_ha->memoryMap.region[IB+i].element_size = 64;
297 pm8001_ha->memoryMap.region[IB+i].total_len =
298 PM8001_MPI_QUEUE * 64;
299 pm8001_ha->memoryMap.region[IB+i].alignment = 64;
300 }
301 }
302
303 for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
304 /* MPI Memory region 4 for producer Index of outbound queues */
305 pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
306 pm8001_ha->memoryMap.region[PI+i].element_size = 4;
307 pm8001_ha->memoryMap.region[PI+i].total_len = 4;
308 pm8001_ha->memoryMap.region[PI+i].alignment = 4;
309
310 if (ent->driver_data != chip_8001) {
311 /* MPI Memory region 6 Outbound queues */
312 pm8001_ha->memoryMap.region[OB+i].num_elements =
313 PM8001_MPI_QUEUE;
314 pm8001_ha->memoryMap.region[OB+i].element_size = 128;
315 pm8001_ha->memoryMap.region[OB+i].total_len =
316 PM8001_MPI_QUEUE * 128;
317 pm8001_ha->memoryMap.region[OB+i].alignment = 128;
318 } else {
319 /* MPI Memory region 6 Outbound queues */
320 pm8001_ha->memoryMap.region[OB+i].num_elements =
321 PM8001_MPI_QUEUE;
322 pm8001_ha->memoryMap.region[OB+i].element_size = 64;
323 pm8001_ha->memoryMap.region[OB+i].total_len =
324 PM8001_MPI_QUEUE * 64;
325 pm8001_ha->memoryMap.region[OB+i].alignment = 64;
326 }
327
328 }
329 /* Memory region write DMA*/
330 pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
331 pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
332 pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
333 /* Memory region for devices*/
334 pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
335 pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
336 sizeof(struct pm8001_device);
337 pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
338 sizeof(struct pm8001_device);
339
340 /* Memory region for ccb_info*/
341 pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
342 pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
343 sizeof(struct pm8001_ccb_info);
344 pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
345 sizeof(struct pm8001_ccb_info);
346
347 /* Memory region for fw flash */
348 pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
349
350 pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
351 pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
352 pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
353 pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
354 for (i = 0; i < USI_MAX_MEMCNT; i++) {
355 if (pm8001_mem_alloc(pm8001_ha->pdev,
356 &pm8001_ha->memoryMap.region[i].virt_ptr,
357 &pm8001_ha->memoryMap.region[i].phys_addr,
358 &pm8001_ha->memoryMap.region[i].phys_addr_hi,
359 &pm8001_ha->memoryMap.region[i].phys_addr_lo,
360 pm8001_ha->memoryMap.region[i].total_len,
361 pm8001_ha->memoryMap.region[i].alignment) != 0) {
362 PM8001_FAIL_DBG(pm8001_ha,
363 pm8001_printk("Mem%d alloc failed\n",
364 i));
365 goto err_out;
366 }
367 }
368
369 pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
370 for (i = 0; i < PM8001_MAX_DEVICES; i++) {
371 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
372 pm8001_ha->devices[i].id = i;
373 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
374 pm8001_ha->devices[i].running_req = 0;
375 }
376 pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
377 for (i = 0; i < PM8001_MAX_CCB; i++) {
378 pm8001_ha->ccb_info[i].ccb_dma_handle =
379 pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
380 i * sizeof(struct pm8001_ccb_info);
381 pm8001_ha->ccb_info[i].task = NULL;
382 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
383 pm8001_ha->ccb_info[i].device = NULL;
384 ++pm8001_ha->tags_num;
385 }
386 pm8001_ha->flags = PM8001F_INIT_TIME;
387 /* Initialize tags */
388 pm8001_tag_init(pm8001_ha);
389 return 0;
390err_out:
391 return 1;
392}
393
394/**
395 * pm8001_ioremap - remap the pci high physical address to kernal virtual
396 * address so that we can access them.
397 * @pm8001_ha:our hba structure.
398 */
399static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
400{
401 u32 bar;
402 u32 logicalBar = 0;
403 struct pci_dev *pdev;
404
405 pdev = pm8001_ha->pdev;
406 /* map pci mem (PMC pci base 0-3)*/
407 for (bar = 0; bar < 6; bar++) {
408 /*
409 ** logical BARs for SPC:
410 ** bar 0 and 1 - logical BAR0
411 ** bar 2 and 3 - logical BAR1
412 ** bar4 - logical BAR2
413 ** bar5 - logical BAR3
414 ** Skip the appropriate assignments:
415 */
416 if ((bar == 1) || (bar == 3))
417 continue;
418 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
419 pm8001_ha->io_mem[logicalBar].membase =
420 pci_resource_start(pdev, bar);
421 pm8001_ha->io_mem[logicalBar].memsize =
422 pci_resource_len(pdev, bar);
423 pm8001_ha->io_mem[logicalBar].memvirtaddr =
424 ioremap(pm8001_ha->io_mem[logicalBar].membase,
425 pm8001_ha->io_mem[logicalBar].memsize);
426 PM8001_INIT_DBG(pm8001_ha,
427 pm8001_printk("PCI: bar %d, logicalBar %d ",
428 bar, logicalBar));
429 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
430 "base addr %llx virt_addr=%llx len=%d\n",
431 (u64)pm8001_ha->io_mem[logicalBar].membase,
432 (u64)(unsigned long)
433 pm8001_ha->io_mem[logicalBar].memvirtaddr,
434 pm8001_ha->io_mem[logicalBar].memsize));
435 } else {
436 pm8001_ha->io_mem[logicalBar].membase = 0;
437 pm8001_ha->io_mem[logicalBar].memsize = 0;
438 pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
439 }
440 logicalBar++;
441 }
442 return 0;
443}
444
445/**
446 * pm8001_pci_alloc - initialize our ha card structure
447 * @pdev: pci device.
448 * @ent: ent
449 * @shost: scsi host struct which has been initialized before.
450 */
451static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
452 const struct pci_device_id *ent,
453 struct Scsi_Host *shost)
454
455{
456 struct pm8001_hba_info *pm8001_ha;
457 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
458 int j;
459
460 pm8001_ha = sha->lldd_ha;
461 if (!pm8001_ha)
462 return NULL;
463
464 pm8001_ha->pdev = pdev;
465 pm8001_ha->dev = &pdev->dev;
466 pm8001_ha->chip_id = ent->driver_data;
467 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
468 pm8001_ha->irq = pdev->irq;
469 pm8001_ha->sas = sha;
470 pm8001_ha->shost = shost;
471 pm8001_ha->id = pm8001_id++;
472 pm8001_ha->logging_level = 0x01;
473 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
474 /* IOMB size is 128 for 8088/89 controllers */
475 if (pm8001_ha->chip_id != chip_8001)
476 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
477 else
478 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
479
480#ifdef PM8001_USE_TASKLET
481 /* Tasklet for non msi-x interrupt handler */
482 if ((!pdev->msix_cap || !pci_msi_enabled())
483 || (pm8001_ha->chip_id == chip_8001))
484 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
485 (unsigned long)&(pm8001_ha->irq_vector[0]));
486 else
487 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
488 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
489 (unsigned long)&(pm8001_ha->irq_vector[j]));
490#endif
491 pm8001_ioremap(pm8001_ha);
492 if (!pm8001_alloc(pm8001_ha, ent))
493 return pm8001_ha;
494 pm8001_free(pm8001_ha);
495 return NULL;
496}
497
498/**
499 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
500 * @pdev: pci device.
501 */
502static int pci_go_44(struct pci_dev *pdev)
503{
504 int rc;
505
506 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
507 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
508 if (rc) {
509 rc = pci_set_consistent_dma_mask(pdev,
510 DMA_BIT_MASK(32));
511 if (rc) {
512 dev_printk(KERN_ERR, &pdev->dev,
513 "44-bit DMA enable failed\n");
514 return rc;
515 }
516 }
517 } else {
518 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
519 if (rc) {
520 dev_printk(KERN_ERR, &pdev->dev,
521 "32-bit DMA enable failed\n");
522 return rc;
523 }
524 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
525 if (rc) {
526 dev_printk(KERN_ERR, &pdev->dev,
527 "32-bit consistent DMA enable failed\n");
528 return rc;
529 }
530 }
531 return rc;
532}
533
534/**
535 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
536 * @shost: scsi host which has been allocated outside.
537 * @chip_info: our ha struct.
538 */
539static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
540 const struct pm8001_chip_info *chip_info)
541{
542 int phy_nr, port_nr;
543 struct asd_sas_phy **arr_phy;
544 struct asd_sas_port **arr_port;
545 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
546
547 phy_nr = chip_info->n_phy;
548 port_nr = phy_nr;
549 memset(sha, 0x00, sizeof(*sha));
550 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
551 if (!arr_phy)
552 goto exit;
553 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
554 if (!arr_port)
555 goto exit_free2;
556
557 sha->sas_phy = arr_phy;
558 sha->sas_port = arr_port;
559 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
560 if (!sha->lldd_ha)
561 goto exit_free1;
562
563 shost->transportt = pm8001_stt;
564 shost->max_id = PM8001_MAX_DEVICES;
565 shost->max_lun = 8;
566 shost->max_channel = 0;
567 shost->unique_id = pm8001_id;
568 shost->max_cmd_len = 16;
569 shost->can_queue = PM8001_CAN_QUEUE;
570 shost->cmd_per_lun = 32;
571 return 0;
572exit_free1:
573 kfree(arr_port);
574exit_free2:
575 kfree(arr_phy);
576exit:
577 return -1;
578}
579
580/**
581 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
582 * @shost: scsi host which has been allocated outside
583 * @chip_info: our ha struct.
584 */
585static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
586 const struct pm8001_chip_info *chip_info)
587{
588 int i = 0;
589 struct pm8001_hba_info *pm8001_ha;
590 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
591
592 pm8001_ha = sha->lldd_ha;
593 for (i = 0; i < chip_info->n_phy; i++) {
594 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
595 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
596 }
597 sha->sas_ha_name = DRV_NAME;
598 sha->dev = pm8001_ha->dev;
599
600 sha->lldd_module = THIS_MODULE;
601 sha->sas_addr = &pm8001_ha->sas_addr[0];
602 sha->num_phys = chip_info->n_phy;
603 sha->core.shost = shost;
604}
605
606/**
607 * pm8001_init_sas_add - initialize sas address
608 * @chip_info: our ha struct.
609 *
610 * Currently we just set the fixed SAS address to our HBA,for manufacture,
611 * it should read from the EEPROM
612 */
613static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
614{
615 u8 i, j;
616#ifdef PM8001_READ_VPD
617 /* For new SPC controllers WWN is stored in flash vpd
618 * For SPC/SPCve controllers WWN is stored in EEPROM
619 * For Older SPC WWN is stored in NVMD
620 */
621 DECLARE_COMPLETION_ONSTACK(completion);
622 struct pm8001_ioctl_payload payload;
623 u16 deviceid;
624 int rc;
625
626 pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
627 pm8001_ha->nvmd_completion = &completion;
628
629 if (pm8001_ha->chip_id == chip_8001) {
630 if (deviceid == 0x8081 || deviceid == 0x0042) {
631 payload.minor_function = 4;
632 payload.length = 4096;
633 } else {
634 payload.minor_function = 0;
635 payload.length = 128;
636 }
637 } else if ((pm8001_ha->chip_id == chip_8070 ||
638 pm8001_ha->chip_id == chip_8072) &&
639 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
640 payload.minor_function = 4;
641 payload.length = 4096;
642 } else {
643 payload.minor_function = 1;
644 payload.length = 4096;
645 }
646 payload.offset = 0;
647 payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
648 if (!payload.func_specific) {
649 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
650 return;
651 }
652 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
653 if (rc) {
654 kfree(payload.func_specific);
655 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
656 return;
657 }
658 wait_for_completion(&completion);
659
660 for (i = 0, j = 0; i <= 7; i++, j++) {
661 if (pm8001_ha->chip_id == chip_8001) {
662 if (deviceid == 0x8081)
663 pm8001_ha->sas_addr[j] =
664 payload.func_specific[0x704 + i];
665 else if (deviceid == 0x0042)
666 pm8001_ha->sas_addr[j] =
667 payload.func_specific[0x010 + i];
668 } else if ((pm8001_ha->chip_id == chip_8070 ||
669 pm8001_ha->chip_id == chip_8072) &&
670 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
671 pm8001_ha->sas_addr[j] =
672 payload.func_specific[0x010 + i];
673 } else
674 pm8001_ha->sas_addr[j] =
675 payload.func_specific[0x804 + i];
676 }
677
678 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
679 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
680 pm8001_ha->sas_addr, SAS_ADDR_SIZE);
681 PM8001_INIT_DBG(pm8001_ha,
682 pm8001_printk("phy %d sas_addr = %016llx\n", i,
683 pm8001_ha->phy[i].dev_sas_addr));
684 }
685 kfree(payload.func_specific);
686#else
687 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
688 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
689 pm8001_ha->phy[i].dev_sas_addr =
690 cpu_to_be64((u64)
691 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
692 }
693 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
694 SAS_ADDR_SIZE);
695#endif
696}
697
698/*
699 * pm8001_get_phy_settings_info : Read phy setting values.
700 * @pm8001_ha : our hba.
701 */
702static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
703{
704
705#ifdef PM8001_READ_VPD
706 /*OPTION ROM FLASH read for the SPC cards */
707 DECLARE_COMPLETION_ONSTACK(completion);
708 struct pm8001_ioctl_payload payload;
709 int rc;
710
711 pm8001_ha->nvmd_completion = &completion;
712 /* SAS ADDRESS read from flash / EEPROM */
713 payload.minor_function = 6;
714 payload.offset = 0;
715 payload.length = 4096;
716 payload.func_specific = kzalloc(4096, GFP_KERNEL);
717 if (!payload.func_specific)
718 return -ENOMEM;
719 /* Read phy setting values from flash */
720 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
721 if (rc) {
722 kfree(payload.func_specific);
723 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
724 return -ENOMEM;
725 }
726 wait_for_completion(&completion);
727 pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
728 kfree(payload.func_specific);
729#endif
730 return 0;
731}
732
733struct pm8001_mpi3_phy_pg_trx_config {
734 u32 LaneLosCfg;
735 u32 LanePgaCfg1;
736 u32 LanePisoCfg1;
737 u32 LanePisoCfg2;
738 u32 LanePisoCfg3;
739 u32 LanePisoCfg4;
740 u32 LanePisoCfg5;
741 u32 LanePisoCfg6;
742 u32 LaneBctCtrl;
743};
744
745/**
746 * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
747 * @pm8001_ha : our adapter
748 * @phycfg : PHY config page to populate
749 */
750static
751void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
752 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
753{
754 phycfg->LaneLosCfg = 0x00000132;
755 phycfg->LanePgaCfg1 = 0x00203949;
756 phycfg->LanePisoCfg1 = 0x000000FF;
757 phycfg->LanePisoCfg2 = 0xFF000001;
758 phycfg->LanePisoCfg3 = 0xE7011300;
759 phycfg->LanePisoCfg4 = 0x631C40C0;
760 phycfg->LanePisoCfg5 = 0xF8102036;
761 phycfg->LanePisoCfg6 = 0xF74A1000;
762 phycfg->LaneBctCtrl = 0x00FB33F8;
763}
764
765/**
766 * pm8001_get_external_phy_settings : Retrieves the external PHY settings
767 * @pm8001_ha : our adapter
768 * @phycfg : PHY config page to populate
769 */
770static
771void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
772 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
773{
774 phycfg->LaneLosCfg = 0x00000132;
775 phycfg->LanePgaCfg1 = 0x00203949;
776 phycfg->LanePisoCfg1 = 0x000000FF;
777 phycfg->LanePisoCfg2 = 0xFF000001;
778 phycfg->LanePisoCfg3 = 0xE7011300;
779 phycfg->LanePisoCfg4 = 0x63349140;
780 phycfg->LanePisoCfg5 = 0xF8102036;
781 phycfg->LanePisoCfg6 = 0xF80D9300;
782 phycfg->LaneBctCtrl = 0x00FB33F8;
783}
784
785/**
786 * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
787 * @pm8001_ha : our adapter
788 * @phymask : The PHY mask
789 */
790static
791void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
792{
793 switch (pm8001_ha->pdev->subsystem_device) {
794 case 0x0070: /* H1280 - 8 external 0 internal */
795 case 0x0072: /* H12F0 - 16 external 0 internal */
796 *phymask = 0x0000;
797 break;
798
799 case 0x0071: /* H1208 - 0 external 8 internal */
800 case 0x0073: /* H120F - 0 external 16 internal */
801 *phymask = 0xFFFF;
802 break;
803
804 case 0x0080: /* H1244 - 4 external 4 internal */
805 *phymask = 0x00F0;
806 break;
807
808 case 0x0081: /* H1248 - 4 external 8 internal */
809 *phymask = 0x0FF0;
810 break;
811
812 case 0x0082: /* H1288 - 8 external 8 internal */
813 *phymask = 0xFF00;
814 break;
815
816 default:
817 PM8001_INIT_DBG(pm8001_ha,
818 pm8001_printk("Unknown subsystem device=0x%.04x",
819 pm8001_ha->pdev->subsystem_device));
820 }
821}
822
823/**
824 * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings
825 * @pm8001_ha : our adapter
826 */
827static
828int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
829{
830 struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
831 struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
832 int phymask = 0;
833 int i = 0;
834
835 memset(&phycfg_int, 0, sizeof(phycfg_int));
836 memset(&phycfg_ext, 0, sizeof(phycfg_ext));
837
838 pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
839 pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
840 pm8001_get_phy_mask(pm8001_ha, &phymask);
841
842 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
843 if (phymask & (1 << i)) {/* Internal PHY */
844 pm8001_set_phy_profile_single(pm8001_ha, i,
845 sizeof(phycfg_int) / sizeof(u32),
846 (u32 *)&phycfg_int);
847
848 } else { /* External PHY */
849 pm8001_set_phy_profile_single(pm8001_ha, i,
850 sizeof(phycfg_ext) / sizeof(u32),
851 (u32 *)&phycfg_ext);
852 }
853 }
854
855 return 0;
856}
857
858/**
859 * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
860 * @pm8001_ha : our hba.
861 */
862static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
863{
864 switch (pm8001_ha->pdev->subsystem_vendor) {
865 case PCI_VENDOR_ID_ATTO:
866 if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
867 return 0;
868 else
869 return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
870
871 case PCI_VENDOR_ID_ADAPTEC2:
872 case 0:
873 return 0;
874
875 default:
876 return pm8001_get_phy_settings_info(pm8001_ha);
877 }
878}
879
880#ifdef PM8001_USE_MSIX
881/**
882 * pm8001_setup_msix - enable MSI-X interrupt
883 * @chip_info: our ha struct.
884 * @irq_handler: irq_handler
885 */
886static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
887{
888 u32 i = 0, j = 0;
889 u32 number_of_intr;
890 int flag = 0;
891 u32 max_entry;
892 int rc;
893 static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3];
894
895 /* SPCv controllers supports 64 msi-x */
896 if (pm8001_ha->chip_id == chip_8001) {
897 number_of_intr = 1;
898 } else {
899 number_of_intr = PM8001_MAX_MSIX_VEC;
900 flag &= ~IRQF_SHARED;
901 }
902
903 max_entry = sizeof(pm8001_ha->msix_entries) /
904 sizeof(pm8001_ha->msix_entries[0]);
905 for (i = 0; i < max_entry ; i++)
906 pm8001_ha->msix_entries[i].entry = i;
907 rc = pci_enable_msix_exact(pm8001_ha->pdev, pm8001_ha->msix_entries,
908 number_of_intr);
909 pm8001_ha->number_of_intr = number_of_intr;
910 if (rc)
911 return rc;
912
913 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
914 "pci_enable_msix_exact request ret:%d no of intr %d\n",
915 rc, pm8001_ha->number_of_intr));
916
917 for (i = 0; i < number_of_intr; i++) {
918 snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
919 DRV_NAME"%d", i);
920 pm8001_ha->irq_vector[i].irq_id = i;
921 pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
922
923 rc = request_irq(pm8001_ha->msix_entries[i].vector,
924 pm8001_interrupt_handler_msix, flag,
925 intr_drvname[i], &(pm8001_ha->irq_vector[i]));
926 if (rc) {
927 for (j = 0; j < i; j++) {
928 free_irq(pm8001_ha->msix_entries[j].vector,
929 &(pm8001_ha->irq_vector[i]));
930 }
931 pci_disable_msix(pm8001_ha->pdev);
932 break;
933 }
934 }
935
936 return rc;
937}
938#endif
939
940/**
941 * pm8001_request_irq - register interrupt
942 * @chip_info: our ha struct.
943 */
944static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
945{
946 struct pci_dev *pdev;
947 int rc;
948
949 pdev = pm8001_ha->pdev;
950
951#ifdef PM8001_USE_MSIX
952 if (pdev->msix_cap && pci_msi_enabled())
953 return pm8001_setup_msix(pm8001_ha);
954 else {
955 PM8001_INIT_DBG(pm8001_ha,
956 pm8001_printk("MSIX not supported!!!\n"));
957 goto intx;
958 }
959#endif
960
961intx:
962 /* initialize the INT-X interrupt */
963 pm8001_ha->irq_vector[0].irq_id = 0;
964 pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
965 rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
966 DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
967 return rc;
968}
969
970/**
971 * pm8001_pci_probe - probe supported device
972 * @pdev: pci device which kernel has been prepared for.
973 * @ent: pci device id
974 *
975 * This function is the main initialization function, when register a new
976 * pci driver it is invoked, all struct an hardware initilization should be done
977 * here, also, register interrupt
978 */
979static int pm8001_pci_probe(struct pci_dev *pdev,
980 const struct pci_device_id *ent)
981{
982 unsigned int rc;
983 u32 pci_reg;
984 u8 i = 0;
985 struct pm8001_hba_info *pm8001_ha;
986 struct Scsi_Host *shost = NULL;
987 const struct pm8001_chip_info *chip;
988
989 dev_printk(KERN_INFO, &pdev->dev,
990 "pm80xx: driver version %s\n", DRV_VERSION);
991 rc = pci_enable_device(pdev);
992 if (rc)
993 goto err_out_enable;
994 pci_set_master(pdev);
995 /*
996 * Enable pci slot busmaster by setting pci command register.
997 * This is required by FW for Cyclone card.
998 */
999
1000 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
1001 pci_reg |= 0x157;
1002 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
1003 rc = pci_request_regions(pdev, DRV_NAME);
1004 if (rc)
1005 goto err_out_disable;
1006 rc = pci_go_44(pdev);
1007 if (rc)
1008 goto err_out_regions;
1009
1010 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
1011 if (!shost) {
1012 rc = -ENOMEM;
1013 goto err_out_regions;
1014 }
1015 chip = &pm8001_chips[ent->driver_data];
1016 SHOST_TO_SAS_HA(shost) =
1017 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
1018 if (!SHOST_TO_SAS_HA(shost)) {
1019 rc = -ENOMEM;
1020 goto err_out_free_host;
1021 }
1022
1023 rc = pm8001_prep_sas_ha_init(shost, chip);
1024 if (rc) {
1025 rc = -ENOMEM;
1026 goto err_out_free;
1027 }
1028 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
1029 /* ent->driver variable is used to differentiate between controllers */
1030 pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
1031 if (!pm8001_ha) {
1032 rc = -ENOMEM;
1033 goto err_out_free;
1034 }
1035 list_add_tail(&pm8001_ha->list, &hba_list);
1036 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1037 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1038 if (rc) {
1039 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
1040 "chip_init failed [ret: %d]\n", rc));
1041 goto err_out_ha_free;
1042 }
1043
1044 rc = scsi_add_host(shost, &pdev->dev);
1045 if (rc)
1046 goto err_out_ha_free;
1047 rc = pm8001_request_irq(pm8001_ha);
1048 if (rc) {
1049 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
1050 "pm8001_request_irq failed [ret: %d]\n", rc));
1051 goto err_out_shost;
1052 }
1053
1054 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1055 if (pm8001_ha->chip_id != chip_8001) {
1056 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1057 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1058 /* setup thermal configuration. */
1059 pm80xx_set_thermal_config(pm8001_ha);
1060 }
1061
1062 pm8001_init_sas_add(pm8001_ha);
1063 /* phy setting support for motherboard controller */
1064 if (pm8001_configure_phy_settings(pm8001_ha))
1065 goto err_out_shost;
1066
1067 pm8001_post_sas_ha_init(shost, chip);
1068 rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
1069 if (rc)
1070 goto err_out_shost;
1071 scsi_scan_host(pm8001_ha->shost);
1072 return 0;
1073
1074err_out_shost:
1075 scsi_remove_host(pm8001_ha->shost);
1076err_out_ha_free:
1077 pm8001_free(pm8001_ha);
1078err_out_free:
1079 kfree(SHOST_TO_SAS_HA(shost));
1080err_out_free_host:
1081 kfree(shost);
1082err_out_regions:
1083 pci_release_regions(pdev);
1084err_out_disable:
1085 pci_disable_device(pdev);
1086err_out_enable:
1087 return rc;
1088}
1089
1090static void pm8001_pci_remove(struct pci_dev *pdev)
1091{
1092 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1093 struct pm8001_hba_info *pm8001_ha;
1094 int i, j;
1095 pm8001_ha = sha->lldd_ha;
1096 scsi_remove_host(pm8001_ha->shost);
1097 sas_unregister_ha(sha);
1098 sas_remove_host(pm8001_ha->shost);
1099 list_del(&pm8001_ha->list);
1100 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1101 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1102
1103#ifdef PM8001_USE_MSIX
1104 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1105 synchronize_irq(pm8001_ha->msix_entries[i].vector);
1106 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1107 free_irq(pm8001_ha->msix_entries[i].vector,
1108 &(pm8001_ha->irq_vector[i]));
1109 pci_disable_msix(pdev);
1110#else
1111 free_irq(pm8001_ha->irq, sha);
1112#endif
1113#ifdef PM8001_USE_TASKLET
1114 /* For non-msix and msix interrupts */
1115 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1116 (pm8001_ha->chip_id == chip_8001))
1117 tasklet_kill(&pm8001_ha->tasklet[0]);
1118 else
1119 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1120 tasklet_kill(&pm8001_ha->tasklet[j]);
1121#endif
1122 pm8001_free(pm8001_ha);
1123 kfree(sha->sas_phy);
1124 kfree(sha->sas_port);
1125 kfree(sha);
1126 pci_release_regions(pdev);
1127 pci_disable_device(pdev);
1128}
1129
1130/**
1131 * pm8001_pci_suspend - power management suspend main entry point
1132 * @pdev: PCI device struct
1133 * @state: PM state change to (usually PCI_D3)
1134 *
1135 * Returns 0 success, anything else error.
1136 */
1137static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1138{
1139 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1140 struct pm8001_hba_info *pm8001_ha;
1141 int i, j;
1142 u32 device_state;
1143 pm8001_ha = sha->lldd_ha;
1144 sas_suspend_ha(sha);
1145 flush_workqueue(pm8001_wq);
1146 scsi_block_requests(pm8001_ha->shost);
1147 if (!pdev->pm_cap) {
1148 dev_err(&pdev->dev, " PCI PM not supported\n");
1149 return -ENODEV;
1150 }
1151 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1152 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1153#ifdef PM8001_USE_MSIX
1154 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1155 synchronize_irq(pm8001_ha->msix_entries[i].vector);
1156 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1157 free_irq(pm8001_ha->msix_entries[i].vector,
1158 &(pm8001_ha->irq_vector[i]));
1159 pci_disable_msix(pdev);
1160#else
1161 free_irq(pm8001_ha->irq, sha);
1162#endif
1163#ifdef PM8001_USE_TASKLET
1164 /* For non-msix and msix interrupts */
1165 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1166 (pm8001_ha->chip_id == chip_8001))
1167 tasklet_kill(&pm8001_ha->tasklet[0]);
1168 else
1169 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1170 tasklet_kill(&pm8001_ha->tasklet[j]);
1171#endif
1172 device_state = pci_choose_state(pdev, state);
1173 pm8001_printk("pdev=0x%p, slot=%s, entering "
1174 "operating state [D%d]\n", pdev,
1175 pm8001_ha->name, device_state);
1176 pci_save_state(pdev);
1177 pci_disable_device(pdev);
1178 pci_set_power_state(pdev, device_state);
1179 return 0;
1180}
1181
1182/**
1183 * pm8001_pci_resume - power management resume main entry point
1184 * @pdev: PCI device struct
1185 *
1186 * Returns 0 success, anything else error.
1187 */
1188static int pm8001_pci_resume(struct pci_dev *pdev)
1189{
1190 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1191 struct pm8001_hba_info *pm8001_ha;
1192 int rc;
1193 u8 i = 0, j;
1194 u32 device_state;
1195 DECLARE_COMPLETION_ONSTACK(completion);
1196 pm8001_ha = sha->lldd_ha;
1197 device_state = pdev->current_state;
1198
1199 pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
1200 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
1201
1202 pci_set_power_state(pdev, PCI_D0);
1203 pci_enable_wake(pdev, PCI_D0, 0);
1204 pci_restore_state(pdev);
1205 rc = pci_enable_device(pdev);
1206 if (rc) {
1207 pm8001_printk("slot=%s Enable device failed during resume\n",
1208 pm8001_ha->name);
1209 goto err_out_enable;
1210 }
1211
1212 pci_set_master(pdev);
1213 rc = pci_go_44(pdev);
1214 if (rc)
1215 goto err_out_disable;
1216 sas_prep_resume_ha(sha);
1217 /* chip soft rst only for spc */
1218 if (pm8001_ha->chip_id == chip_8001) {
1219 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1220 PM8001_INIT_DBG(pm8001_ha,
1221 pm8001_printk("chip soft reset successful\n"));
1222 }
1223 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1224 if (rc)
1225 goto err_out_disable;
1226
1227 /* disable all the interrupt bits */
1228 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1229
1230 rc = pm8001_request_irq(pm8001_ha);
1231 if (rc)
1232 goto err_out_disable;
1233#ifdef PM8001_USE_TASKLET
1234 /* Tasklet for non msi-x interrupt handler */
1235 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1236 (pm8001_ha->chip_id == chip_8001))
1237 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
1238 (unsigned long)&(pm8001_ha->irq_vector[0]));
1239 else
1240 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1241 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
1242 (unsigned long)&(pm8001_ha->irq_vector[j]));
1243#endif
1244 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1245 if (pm8001_ha->chip_id != chip_8001) {
1246 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1247 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1248 }
1249
1250 /* Chip documentation for the 8070 and 8072 SPCv */
1251 /* states that a 500ms minimum delay is required */
1252 /* before issuing commands. Otherwise, the firmware */
1253 /* will enter an unrecoverable state. */
1254
1255 if (pm8001_ha->chip_id == chip_8070 ||
1256 pm8001_ha->chip_id == chip_8072) {
1257 mdelay(500);
1258 }
1259
1260 /* Spin up the PHYs */
1261
1262 pm8001_ha->flags = PM8001F_RUN_TIME;
1263 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
1264 pm8001_ha->phy[i].enable_completion = &completion;
1265 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
1266 wait_for_completion(&completion);
1267 }
1268 sas_resume_ha(sha);
1269 return 0;
1270
1271err_out_disable:
1272 scsi_remove_host(pm8001_ha->shost);
1273 pci_disable_device(pdev);
1274err_out_enable:
1275 return rc;
1276}
1277
1278/* update of pci device, vendor id and driver data with
1279 * unique value for each of the controller
1280 */
1281static struct pci_device_id pm8001_pci_table[] = {
1282 { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1283 { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
1284 { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
1285 { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
1286 /* Support for SPC/SPCv/SPCve controllers */
1287 { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1288 { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1289 { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1290 { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1291 { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1292 { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1293 { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1294 { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1295 { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1296 { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
1297 { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
1298 { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
1299 { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
1300 { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
1301 { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
1302 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1303 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1304 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1305 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1306 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1307 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1308 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1309 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1310 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1311 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1312 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1313 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1314 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1315 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1316 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1317 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1318 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1319 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1320 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1321 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1322 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1323 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
1324 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1325 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
1326 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1327 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
1328 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1329 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
1330 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1331 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
1332 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1333 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
1334 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1335 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
1336 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1337 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
1338 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1339 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
1340 { PCI_VENDOR_ID_ATTO, 0x8070,
1341 PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
1342 { PCI_VENDOR_ID_ATTO, 0x8070,
1343 PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
1344 { PCI_VENDOR_ID_ATTO, 0x8072,
1345 PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
1346 { PCI_VENDOR_ID_ATTO, 0x8072,
1347 PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
1348 { PCI_VENDOR_ID_ATTO, 0x8070,
1349 PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
1350 { PCI_VENDOR_ID_ATTO, 0x8072,
1351 PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
1352 { PCI_VENDOR_ID_ATTO, 0x8072,
1353 PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
1354 {} /* terminate list */
1355};
1356
1357static struct pci_driver pm8001_pci_driver = {
1358 .name = DRV_NAME,
1359 .id_table = pm8001_pci_table,
1360 .probe = pm8001_pci_probe,
1361 .remove = pm8001_pci_remove,
1362 .suspend = pm8001_pci_suspend,
1363 .resume = pm8001_pci_resume,
1364};
1365
1366/**
1367 * pm8001_init - initialize scsi transport template
1368 */
1369static int __init pm8001_init(void)
1370{
1371 int rc = -ENOMEM;
1372
1373 pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1374 if (!pm8001_wq)
1375 goto err;
1376
1377 pm8001_id = 0;
1378 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1379 if (!pm8001_stt)
1380 goto err_wq;
1381 rc = pci_register_driver(&pm8001_pci_driver);
1382 if (rc)
1383 goto err_tp;
1384 return 0;
1385
1386err_tp:
1387 sas_release_transport(pm8001_stt);
1388err_wq:
1389 destroy_workqueue(pm8001_wq);
1390err:
1391 return rc;
1392}
1393
1394static void __exit pm8001_exit(void)
1395{
1396 pci_unregister_driver(&pm8001_pci_driver);
1397 sas_release_transport(pm8001_stt);
1398 destroy_workqueue(pm8001_wq);
1399}
1400
1401module_init(pm8001_init);
1402module_exit(pm8001_exit);
1403
1404MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
1405MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
1406MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
1407MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
1408MODULE_DESCRIPTION(
1409 "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
1410 "SAS/SATA controller driver");
1411MODULE_VERSION(DRV_VERSION);
1412MODULE_LICENSE("GPL");
1413MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
1414
1/*
2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41#include <linux/slab.h>
42#include "pm8001_sas.h"
43#include "pm8001_chips.h"
44#include "pm80xx_hwi.h"
45
46static ulong logging_level = PM8001_FAIL_LOGGING | PM8001_IOERR_LOGGING;
47module_param(logging_level, ulong, 0644);
48MODULE_PARM_DESC(logging_level, " bits for enabling logging info.");
49
50static ulong link_rate = LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | LINKRATE_120;
51module_param(link_rate, ulong, 0644);
52MODULE_PARM_DESC(link_rate, "Enable link rate.\n"
53 " 1: Link rate 1.5G\n"
54 " 2: Link rate 3.0G\n"
55 " 4: Link rate 6.0G\n"
56 " 8: Link rate 12.0G\n");
57
58static struct scsi_transport_template *pm8001_stt;
59static int pm8001_init_ccb_tag(struct pm8001_hba_info *);
60
61/*
62 * chip info structure to identify chip key functionality as
63 * encryption available/not, no of ports, hw specific function ref
64 */
65static const struct pm8001_chip_info pm8001_chips[] = {
66 [chip_8001] = {0, 8, &pm8001_8001_dispatch,},
67 [chip_8008] = {0, 8, &pm8001_80xx_dispatch,},
68 [chip_8009] = {1, 8, &pm8001_80xx_dispatch,},
69 [chip_8018] = {0, 16, &pm8001_80xx_dispatch,},
70 [chip_8019] = {1, 16, &pm8001_80xx_dispatch,},
71 [chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
72 [chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
73 [chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
74 [chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
75 [chip_8070] = {0, 8, &pm8001_80xx_dispatch,},
76 [chip_8072] = {0, 16, &pm8001_80xx_dispatch,},
77};
78static int pm8001_id;
79
80LIST_HEAD(hba_list);
81
82struct workqueue_struct *pm8001_wq;
83
84static void pm8001_map_queues(struct Scsi_Host *shost)
85{
86 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
87 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
88 struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
89
90 if (pm8001_ha->number_of_intr > 1)
91 blk_mq_pci_map_queues(qmap, pm8001_ha->pdev, 1);
92
93 return blk_mq_map_queues(qmap);
94}
95
96/*
97 * The main structure which LLDD must register for scsi core.
98 */
99static struct scsi_host_template pm8001_sht = {
100 .module = THIS_MODULE,
101 .name = DRV_NAME,
102 .proc_name = DRV_NAME,
103 .queuecommand = sas_queuecommand,
104 .dma_need_drain = ata_scsi_dma_need_drain,
105 .target_alloc = sas_target_alloc,
106 .slave_configure = sas_slave_configure,
107 .scan_finished = pm8001_scan_finished,
108 .scan_start = pm8001_scan_start,
109 .change_queue_depth = sas_change_queue_depth,
110 .bios_param = sas_bios_param,
111 .can_queue = 1,
112 .this_id = -1,
113 .sg_tablesize = PM8001_MAX_DMA_SG,
114 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
115 .eh_device_reset_handler = sas_eh_device_reset_handler,
116 .eh_target_reset_handler = sas_eh_target_reset_handler,
117 .slave_alloc = sas_slave_alloc,
118 .target_destroy = sas_target_destroy,
119 .ioctl = sas_ioctl,
120#ifdef CONFIG_COMPAT
121 .compat_ioctl = sas_ioctl,
122#endif
123 .shost_groups = pm8001_host_groups,
124 .track_queue_depth = 1,
125 .cmd_per_lun = 32,
126 .map_queues = pm8001_map_queues,
127};
128
129/*
130 * Sas layer call this function to execute specific task.
131 */
132static struct sas_domain_function_template pm8001_transport_ops = {
133 .lldd_dev_found = pm8001_dev_found,
134 .lldd_dev_gone = pm8001_dev_gone,
135
136 .lldd_execute_task = pm8001_queue_command,
137 .lldd_control_phy = pm8001_phy_control,
138
139 .lldd_abort_task = pm8001_abort_task,
140 .lldd_abort_task_set = sas_abort_task_set,
141 .lldd_clear_task_set = pm8001_clear_task_set,
142 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
143 .lldd_lu_reset = pm8001_lu_reset,
144 .lldd_query_task = pm8001_query_task,
145 .lldd_port_formed = pm8001_port_formed,
146 .lldd_tmf_exec_complete = pm8001_setds_completion,
147 .lldd_tmf_aborted = pm8001_tmf_aborted,
148};
149
150/**
151 * pm8001_phy_init - initiate our adapter phys
152 * @pm8001_ha: our hba structure.
153 * @phy_id: phy id.
154 */
155static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
156{
157 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
158 struct asd_sas_phy *sas_phy = &phy->sas_phy;
159 phy->phy_state = PHY_LINK_DISABLE;
160 phy->pm8001_ha = pm8001_ha;
161 phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
162 phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
163 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
164 sas_phy->class = SAS;
165 sas_phy->iproto = SAS_PROTOCOL_ALL;
166 sas_phy->tproto = 0;
167 sas_phy->type = PHY_TYPE_PHYSICAL;
168 sas_phy->role = PHY_ROLE_INITIATOR;
169 sas_phy->oob_mode = OOB_NOT_CONNECTED;
170 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
171 sas_phy->id = phy_id;
172 sas_phy->sas_addr = (u8 *)&phy->dev_sas_addr;
173 sas_phy->frame_rcvd = &phy->frame_rcvd[0];
174 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
175 sas_phy->lldd_phy = phy;
176}
177
178/**
179 * pm8001_free - free hba
180 * @pm8001_ha: our hba structure.
181 */
182static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
183{
184 int i;
185
186 if (!pm8001_ha)
187 return;
188
189 for (i = 0; i < USI_MAX_MEMCNT; i++) {
190 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
191 dma_free_coherent(&pm8001_ha->pdev->dev,
192 (pm8001_ha->memoryMap.region[i].total_len +
193 pm8001_ha->memoryMap.region[i].alignment),
194 pm8001_ha->memoryMap.region[i].virt_ptr,
195 pm8001_ha->memoryMap.region[i].phys_addr);
196 }
197 }
198 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
199 flush_workqueue(pm8001_wq);
200 bitmap_free(pm8001_ha->rsvd_tags);
201 kfree(pm8001_ha);
202}
203
204#ifdef PM8001_USE_TASKLET
205
206/**
207 * pm8001_tasklet() - tasklet for 64 msi-x interrupt handler
208 * @opaque: the passed general host adapter struct
209 * Note: pm8001_tasklet is common for pm8001 & pm80xx
210 */
211static void pm8001_tasklet(unsigned long opaque)
212{
213 struct pm8001_hba_info *pm8001_ha;
214 struct isr_param *irq_vector;
215
216 irq_vector = (struct isr_param *)opaque;
217 pm8001_ha = irq_vector->drv_inst;
218 if (unlikely(!pm8001_ha))
219 BUG_ON(1);
220 PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
221}
222#endif
223
224/**
225 * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
226 * It obtains the vector number and calls the equivalent bottom
227 * half or services directly.
228 * @irq: interrupt number
229 * @opaque: the passed outbound queue/vector. Host structure is
230 * retrieved from the same.
231 */
232static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
233{
234 struct isr_param *irq_vector;
235 struct pm8001_hba_info *pm8001_ha;
236 irqreturn_t ret = IRQ_HANDLED;
237 irq_vector = (struct isr_param *)opaque;
238 pm8001_ha = irq_vector->drv_inst;
239
240 if (unlikely(!pm8001_ha))
241 return IRQ_NONE;
242 if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
243 return IRQ_NONE;
244#ifdef PM8001_USE_TASKLET
245 tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
246#else
247 ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
248#endif
249 return ret;
250}
251
252/**
253 * pm8001_interrupt_handler_intx - main INTx interrupt handler.
254 * @irq: interrupt number
255 * @dev_id: sas_ha structure. The HBA is retrieved from sas_ha structure.
256 */
257
258static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
259{
260 struct pm8001_hba_info *pm8001_ha;
261 irqreturn_t ret = IRQ_HANDLED;
262 struct sas_ha_struct *sha = dev_id;
263 pm8001_ha = sha->lldd_ha;
264 if (unlikely(!pm8001_ha))
265 return IRQ_NONE;
266 if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
267 return IRQ_NONE;
268
269#ifdef PM8001_USE_TASKLET
270 tasklet_schedule(&pm8001_ha->tasklet[0]);
271#else
272 ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
273#endif
274 return ret;
275}
276
277static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha);
278static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
279
280/**
281 * pm8001_alloc - initiate our hba structure and 6 DMAs area.
282 * @pm8001_ha: our hba structure.
283 * @ent: PCI device ID structure to match on
284 */
285static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
286 const struct pci_device_id *ent)
287{
288 int i, count = 0, rc = 0;
289 u32 ci_offset, ib_offset, ob_offset, pi_offset;
290 struct inbound_queue_table *ibq;
291 struct outbound_queue_table *obq;
292
293 spin_lock_init(&pm8001_ha->lock);
294 spin_lock_init(&pm8001_ha->bitmap_lock);
295 pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
296 pm8001_ha->chip->n_phy);
297
298 /* Setup Interrupt */
299 rc = pm8001_setup_irq(pm8001_ha);
300 if (rc) {
301 pm8001_dbg(pm8001_ha, FAIL,
302 "pm8001_setup_irq failed [ret: %d]\n", rc);
303 goto err_out;
304 }
305 /* Request Interrupt */
306 rc = pm8001_request_irq(pm8001_ha);
307 if (rc)
308 goto err_out;
309
310 count = pm8001_ha->max_q_num;
311 /* Queues are chosen based on the number of cores/msix availability */
312 ib_offset = pm8001_ha->ib_offset = USI_MAX_MEMCNT_BASE;
313 ci_offset = pm8001_ha->ci_offset = ib_offset + count;
314 ob_offset = pm8001_ha->ob_offset = ci_offset + count;
315 pi_offset = pm8001_ha->pi_offset = ob_offset + count;
316 pm8001_ha->max_memcnt = pi_offset + count;
317
318 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
319 pm8001_phy_init(pm8001_ha, i);
320 pm8001_ha->port[i].wide_port_phymap = 0;
321 pm8001_ha->port[i].port_attached = 0;
322 pm8001_ha->port[i].port_state = 0;
323 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
324 }
325
326 /* MPI Memory region 1 for AAP Event Log for fw */
327 pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
328 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
329 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
330 pm8001_ha->memoryMap.region[AAP1].alignment = 32;
331
332 /* MPI Memory region 2 for IOP Event Log for fw */
333 pm8001_ha->memoryMap.region[IOP].num_elements = 1;
334 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
335 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
336 pm8001_ha->memoryMap.region[IOP].alignment = 32;
337
338 for (i = 0; i < count; i++) {
339 ibq = &pm8001_ha->inbnd_q_tbl[i];
340 spin_lock_init(&ibq->iq_lock);
341 /* MPI Memory region 3 for consumer Index of inbound queues */
342 pm8001_ha->memoryMap.region[ci_offset+i].num_elements = 1;
343 pm8001_ha->memoryMap.region[ci_offset+i].element_size = 4;
344 pm8001_ha->memoryMap.region[ci_offset+i].total_len = 4;
345 pm8001_ha->memoryMap.region[ci_offset+i].alignment = 4;
346
347 if ((ent->driver_data) != chip_8001) {
348 /* MPI Memory region 5 inbound queues */
349 pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
350 PM8001_MPI_QUEUE;
351 pm8001_ha->memoryMap.region[ib_offset+i].element_size
352 = 128;
353 pm8001_ha->memoryMap.region[ib_offset+i].total_len =
354 PM8001_MPI_QUEUE * 128;
355 pm8001_ha->memoryMap.region[ib_offset+i].alignment
356 = 128;
357 } else {
358 pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
359 PM8001_MPI_QUEUE;
360 pm8001_ha->memoryMap.region[ib_offset+i].element_size
361 = 64;
362 pm8001_ha->memoryMap.region[ib_offset+i].total_len =
363 PM8001_MPI_QUEUE * 64;
364 pm8001_ha->memoryMap.region[ib_offset+i].alignment = 64;
365 }
366 }
367
368 for (i = 0; i < count; i++) {
369 obq = &pm8001_ha->outbnd_q_tbl[i];
370 spin_lock_init(&obq->oq_lock);
371 /* MPI Memory region 4 for producer Index of outbound queues */
372 pm8001_ha->memoryMap.region[pi_offset+i].num_elements = 1;
373 pm8001_ha->memoryMap.region[pi_offset+i].element_size = 4;
374 pm8001_ha->memoryMap.region[pi_offset+i].total_len = 4;
375 pm8001_ha->memoryMap.region[pi_offset+i].alignment = 4;
376
377 if (ent->driver_data != chip_8001) {
378 /* MPI Memory region 6 Outbound queues */
379 pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
380 PM8001_MPI_QUEUE;
381 pm8001_ha->memoryMap.region[ob_offset+i].element_size
382 = 128;
383 pm8001_ha->memoryMap.region[ob_offset+i].total_len =
384 PM8001_MPI_QUEUE * 128;
385 pm8001_ha->memoryMap.region[ob_offset+i].alignment
386 = 128;
387 } else {
388 /* MPI Memory region 6 Outbound queues */
389 pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
390 PM8001_MPI_QUEUE;
391 pm8001_ha->memoryMap.region[ob_offset+i].element_size
392 = 64;
393 pm8001_ha->memoryMap.region[ob_offset+i].total_len =
394 PM8001_MPI_QUEUE * 64;
395 pm8001_ha->memoryMap.region[ob_offset+i].alignment = 64;
396 }
397
398 }
399 /* Memory region write DMA*/
400 pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
401 pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
402 pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
403
404 /* Memory region for fw flash */
405 pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
406
407 pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
408 pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
409 pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
410 pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
411 for (i = 0; i < pm8001_ha->max_memcnt; i++) {
412 struct mpi_mem *region = &pm8001_ha->memoryMap.region[i];
413
414 if (pm8001_mem_alloc(pm8001_ha->pdev,
415 ®ion->virt_ptr,
416 ®ion->phys_addr,
417 ®ion->phys_addr_hi,
418 ®ion->phys_addr_lo,
419 region->total_len,
420 region->alignment) != 0) {
421 pm8001_dbg(pm8001_ha, FAIL, "Mem%d alloc failed\n", i);
422 goto err_out;
423 }
424 }
425
426 /* Memory region for devices*/
427 pm8001_ha->devices = kzalloc(PM8001_MAX_DEVICES
428 * sizeof(struct pm8001_device), GFP_KERNEL);
429 if (!pm8001_ha->devices) {
430 rc = -ENOMEM;
431 goto err_out_nodev;
432 }
433 for (i = 0; i < PM8001_MAX_DEVICES; i++) {
434 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
435 pm8001_ha->devices[i].id = i;
436 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
437 atomic_set(&pm8001_ha->devices[i].running_req, 0);
438 }
439 pm8001_ha->flags = PM8001F_INIT_TIME;
440 return 0;
441
442err_out_nodev:
443 for (i = 0; i < pm8001_ha->max_memcnt; i++) {
444 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
445 dma_free_coherent(&pm8001_ha->pdev->dev,
446 (pm8001_ha->memoryMap.region[i].total_len +
447 pm8001_ha->memoryMap.region[i].alignment),
448 pm8001_ha->memoryMap.region[i].virt_ptr,
449 pm8001_ha->memoryMap.region[i].phys_addr);
450 }
451 }
452err_out:
453 return 1;
454}
455
456/**
457 * pm8001_ioremap - remap the pci high physical address to kernel virtual
458 * address so that we can access them.
459 * @pm8001_ha: our hba structure.
460 */
461static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
462{
463 u32 bar;
464 u32 logicalBar = 0;
465 struct pci_dev *pdev;
466
467 pdev = pm8001_ha->pdev;
468 /* map pci mem (PMC pci base 0-3)*/
469 for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
470 /*
471 ** logical BARs for SPC:
472 ** bar 0 and 1 - logical BAR0
473 ** bar 2 and 3 - logical BAR1
474 ** bar4 - logical BAR2
475 ** bar5 - logical BAR3
476 ** Skip the appropriate assignments:
477 */
478 if ((bar == 1) || (bar == 3))
479 continue;
480 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
481 pm8001_ha->io_mem[logicalBar].membase =
482 pci_resource_start(pdev, bar);
483 pm8001_ha->io_mem[logicalBar].memsize =
484 pci_resource_len(pdev, bar);
485 pm8001_ha->io_mem[logicalBar].memvirtaddr =
486 ioremap(pm8001_ha->io_mem[logicalBar].membase,
487 pm8001_ha->io_mem[logicalBar].memsize);
488 if (!pm8001_ha->io_mem[logicalBar].memvirtaddr) {
489 pm8001_dbg(pm8001_ha, INIT,
490 "Failed to ioremap bar %d, logicalBar %d",
491 bar, logicalBar);
492 return -ENOMEM;
493 }
494 pm8001_dbg(pm8001_ha, INIT,
495 "base addr %llx virt_addr=%llx len=%d\n",
496 (u64)pm8001_ha->io_mem[logicalBar].membase,
497 (u64)(unsigned long)
498 pm8001_ha->io_mem[logicalBar].memvirtaddr,
499 pm8001_ha->io_mem[logicalBar].memsize);
500 } else {
501 pm8001_ha->io_mem[logicalBar].membase = 0;
502 pm8001_ha->io_mem[logicalBar].memsize = 0;
503 pm8001_ha->io_mem[logicalBar].memvirtaddr = NULL;
504 }
505 logicalBar++;
506 }
507 return 0;
508}
509
510/**
511 * pm8001_pci_alloc - initialize our ha card structure
512 * @pdev: pci device.
513 * @ent: ent
514 * @shost: scsi host struct which has been initialized before.
515 */
516static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
517 const struct pci_device_id *ent,
518 struct Scsi_Host *shost)
519
520{
521 struct pm8001_hba_info *pm8001_ha;
522 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
523 int j;
524
525 pm8001_ha = sha->lldd_ha;
526 if (!pm8001_ha)
527 return NULL;
528
529 pm8001_ha->pdev = pdev;
530 pm8001_ha->dev = &pdev->dev;
531 pm8001_ha->chip_id = ent->driver_data;
532 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
533 pm8001_ha->irq = pdev->irq;
534 pm8001_ha->sas = sha;
535 pm8001_ha->shost = shost;
536 pm8001_ha->id = pm8001_id++;
537 pm8001_ha->logging_level = logging_level;
538 pm8001_ha->non_fatal_count = 0;
539 if (link_rate >= 1 && link_rate <= 15)
540 pm8001_ha->link_rate = (link_rate << 8);
541 else {
542 pm8001_ha->link_rate = LINKRATE_15 | LINKRATE_30 |
543 LINKRATE_60 | LINKRATE_120;
544 pm8001_dbg(pm8001_ha, FAIL,
545 "Setting link rate to default value\n");
546 }
547 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
548 /* IOMB size is 128 for 8088/89 controllers */
549 if (pm8001_ha->chip_id != chip_8001)
550 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
551 else
552 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
553
554#ifdef PM8001_USE_TASKLET
555 /* Tasklet for non msi-x interrupt handler */
556 if ((!pdev->msix_cap || !pci_msi_enabled())
557 || (pm8001_ha->chip_id == chip_8001))
558 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
559 (unsigned long)&(pm8001_ha->irq_vector[0]));
560 else
561 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
562 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
563 (unsigned long)&(pm8001_ha->irq_vector[j]));
564#endif
565 if (pm8001_ioremap(pm8001_ha))
566 goto failed_pci_alloc;
567 if (!pm8001_alloc(pm8001_ha, ent))
568 return pm8001_ha;
569failed_pci_alloc:
570 pm8001_free(pm8001_ha);
571 return NULL;
572}
573
574/**
575 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
576 * @pdev: pci device.
577 */
578static int pci_go_44(struct pci_dev *pdev)
579{
580 int rc;
581
582 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
583 if (rc) {
584 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
585 if (rc)
586 dev_printk(KERN_ERR, &pdev->dev,
587 "32-bit DMA enable failed\n");
588 }
589 return rc;
590}
591
592/**
593 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
594 * @shost: scsi host which has been allocated outside.
595 * @chip_info: our ha struct.
596 */
597static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
598 const struct pm8001_chip_info *chip_info)
599{
600 int phy_nr, port_nr;
601 struct asd_sas_phy **arr_phy;
602 struct asd_sas_port **arr_port;
603 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
604
605 phy_nr = chip_info->n_phy;
606 port_nr = phy_nr;
607 memset(sha, 0x00, sizeof(*sha));
608 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
609 if (!arr_phy)
610 goto exit;
611 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
612 if (!arr_port)
613 goto exit_free2;
614
615 sha->sas_phy = arr_phy;
616 sha->sas_port = arr_port;
617 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
618 if (!sha->lldd_ha)
619 goto exit_free1;
620
621 shost->transportt = pm8001_stt;
622 shost->max_id = PM8001_MAX_DEVICES;
623 shost->unique_id = pm8001_id;
624 shost->max_cmd_len = 16;
625 return 0;
626exit_free1:
627 kfree(arr_port);
628exit_free2:
629 kfree(arr_phy);
630exit:
631 return -1;
632}
633
634/**
635 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
636 * @shost: scsi host which has been allocated outside
637 * @chip_info: our ha struct.
638 */
639static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
640 const struct pm8001_chip_info *chip_info)
641{
642 int i = 0;
643 struct pm8001_hba_info *pm8001_ha;
644 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
645
646 pm8001_ha = sha->lldd_ha;
647 for (i = 0; i < chip_info->n_phy; i++) {
648 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
649 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
650 sha->sas_phy[i]->sas_addr =
651 (u8 *)&pm8001_ha->phy[i].dev_sas_addr;
652 }
653 sha->sas_ha_name = DRV_NAME;
654 sha->dev = pm8001_ha->dev;
655 sha->strict_wide_ports = 1;
656 sha->lldd_module = THIS_MODULE;
657 sha->sas_addr = &pm8001_ha->sas_addr[0];
658 sha->num_phys = chip_info->n_phy;
659 sha->core.shost = shost;
660}
661
662/**
663 * pm8001_init_sas_add - initialize sas address
664 * @pm8001_ha: our ha struct.
665 *
666 * Currently we just set the fixed SAS address to our HBA, for manufacture,
667 * it should read from the EEPROM
668 */
669static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
670{
671 u8 i, j;
672 u8 sas_add[8];
673#ifdef PM8001_READ_VPD
674 /* For new SPC controllers WWN is stored in flash vpd
675 * For SPC/SPCve controllers WWN is stored in EEPROM
676 * For Older SPC WWN is stored in NVMD
677 */
678 DECLARE_COMPLETION_ONSTACK(completion);
679 struct pm8001_ioctl_payload payload;
680 u16 deviceid;
681 int rc;
682
683 pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
684 pm8001_ha->nvmd_completion = &completion;
685
686 if (pm8001_ha->chip_id == chip_8001) {
687 if (deviceid == 0x8081 || deviceid == 0x0042) {
688 payload.minor_function = 4;
689 payload.rd_length = 4096;
690 } else {
691 payload.minor_function = 0;
692 payload.rd_length = 128;
693 }
694 } else if ((pm8001_ha->chip_id == chip_8070 ||
695 pm8001_ha->chip_id == chip_8072) &&
696 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
697 payload.minor_function = 4;
698 payload.rd_length = 4096;
699 } else {
700 payload.minor_function = 1;
701 payload.rd_length = 4096;
702 }
703 payload.offset = 0;
704 payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
705 if (!payload.func_specific) {
706 pm8001_dbg(pm8001_ha, INIT, "mem alloc fail\n");
707 return;
708 }
709 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
710 if (rc) {
711 kfree(payload.func_specific);
712 pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
713 return;
714 }
715 wait_for_completion(&completion);
716
717 for (i = 0, j = 0; i <= 7; i++, j++) {
718 if (pm8001_ha->chip_id == chip_8001) {
719 if (deviceid == 0x8081)
720 pm8001_ha->sas_addr[j] =
721 payload.func_specific[0x704 + i];
722 else if (deviceid == 0x0042)
723 pm8001_ha->sas_addr[j] =
724 payload.func_specific[0x010 + i];
725 } else if ((pm8001_ha->chip_id == chip_8070 ||
726 pm8001_ha->chip_id == chip_8072) &&
727 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
728 pm8001_ha->sas_addr[j] =
729 payload.func_specific[0x010 + i];
730 } else
731 pm8001_ha->sas_addr[j] =
732 payload.func_specific[0x804 + i];
733 }
734 memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE);
735 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
736 if (i && ((i % 4) == 0))
737 sas_add[7] = sas_add[7] + 4;
738 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
739 sas_add, SAS_ADDR_SIZE);
740 pm8001_dbg(pm8001_ha, INIT, "phy %d sas_addr = %016llx\n", i,
741 pm8001_ha->phy[i].dev_sas_addr);
742 }
743 kfree(payload.func_specific);
744#else
745 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
746 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
747 pm8001_ha->phy[i].dev_sas_addr =
748 cpu_to_be64((u64)
749 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
750 }
751 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
752 SAS_ADDR_SIZE);
753#endif
754}
755
756/*
757 * pm8001_get_phy_settings_info : Read phy setting values.
758 * @pm8001_ha : our hba.
759 */
760static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
761{
762
763#ifdef PM8001_READ_VPD
764 /*OPTION ROM FLASH read for the SPC cards */
765 DECLARE_COMPLETION_ONSTACK(completion);
766 struct pm8001_ioctl_payload payload;
767 int rc;
768
769 pm8001_ha->nvmd_completion = &completion;
770 /* SAS ADDRESS read from flash / EEPROM */
771 payload.minor_function = 6;
772 payload.offset = 0;
773 payload.rd_length = 4096;
774 payload.func_specific = kzalloc(4096, GFP_KERNEL);
775 if (!payload.func_specific)
776 return -ENOMEM;
777 /* Read phy setting values from flash */
778 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
779 if (rc) {
780 kfree(payload.func_specific);
781 pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
782 return -ENOMEM;
783 }
784 wait_for_completion(&completion);
785 pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
786 kfree(payload.func_specific);
787#endif
788 return 0;
789}
790
791struct pm8001_mpi3_phy_pg_trx_config {
792 u32 LaneLosCfg;
793 u32 LanePgaCfg1;
794 u32 LanePisoCfg1;
795 u32 LanePisoCfg2;
796 u32 LanePisoCfg3;
797 u32 LanePisoCfg4;
798 u32 LanePisoCfg5;
799 u32 LanePisoCfg6;
800 u32 LaneBctCtrl;
801};
802
803/**
804 * pm8001_get_internal_phy_settings - Retrieves the internal PHY settings
805 * @pm8001_ha : our adapter
806 * @phycfg : PHY config page to populate
807 */
808static
809void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
810 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
811{
812 phycfg->LaneLosCfg = 0x00000132;
813 phycfg->LanePgaCfg1 = 0x00203949;
814 phycfg->LanePisoCfg1 = 0x000000FF;
815 phycfg->LanePisoCfg2 = 0xFF000001;
816 phycfg->LanePisoCfg3 = 0xE7011300;
817 phycfg->LanePisoCfg4 = 0x631C40C0;
818 phycfg->LanePisoCfg5 = 0xF8102036;
819 phycfg->LanePisoCfg6 = 0xF74A1000;
820 phycfg->LaneBctCtrl = 0x00FB33F8;
821}
822
823/**
824 * pm8001_get_external_phy_settings - Retrieves the external PHY settings
825 * @pm8001_ha : our adapter
826 * @phycfg : PHY config page to populate
827 */
828static
829void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
830 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
831{
832 phycfg->LaneLosCfg = 0x00000132;
833 phycfg->LanePgaCfg1 = 0x00203949;
834 phycfg->LanePisoCfg1 = 0x000000FF;
835 phycfg->LanePisoCfg2 = 0xFF000001;
836 phycfg->LanePisoCfg3 = 0xE7011300;
837 phycfg->LanePisoCfg4 = 0x63349140;
838 phycfg->LanePisoCfg5 = 0xF8102036;
839 phycfg->LanePisoCfg6 = 0xF80D9300;
840 phycfg->LaneBctCtrl = 0x00FB33F8;
841}
842
843/**
844 * pm8001_get_phy_mask - Retrieves the mask that denotes if a PHY is int/ext
845 * @pm8001_ha : our adapter
846 * @phymask : The PHY mask
847 */
848static
849void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
850{
851 switch (pm8001_ha->pdev->subsystem_device) {
852 case 0x0070: /* H1280 - 8 external 0 internal */
853 case 0x0072: /* H12F0 - 16 external 0 internal */
854 *phymask = 0x0000;
855 break;
856
857 case 0x0071: /* H1208 - 0 external 8 internal */
858 case 0x0073: /* H120F - 0 external 16 internal */
859 *phymask = 0xFFFF;
860 break;
861
862 case 0x0080: /* H1244 - 4 external 4 internal */
863 *phymask = 0x00F0;
864 break;
865
866 case 0x0081: /* H1248 - 4 external 8 internal */
867 *phymask = 0x0FF0;
868 break;
869
870 case 0x0082: /* H1288 - 8 external 8 internal */
871 *phymask = 0xFF00;
872 break;
873
874 default:
875 pm8001_dbg(pm8001_ha, INIT,
876 "Unknown subsystem device=0x%.04x\n",
877 pm8001_ha->pdev->subsystem_device);
878 }
879}
880
881/**
882 * pm8001_set_phy_settings_ven_117c_12G() - Configure ATTO 12Gb PHY settings
883 * @pm8001_ha : our adapter
884 */
885static
886int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
887{
888 struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
889 struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
890 int phymask = 0;
891 int i = 0;
892
893 memset(&phycfg_int, 0, sizeof(phycfg_int));
894 memset(&phycfg_ext, 0, sizeof(phycfg_ext));
895
896 pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
897 pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
898 pm8001_get_phy_mask(pm8001_ha, &phymask);
899
900 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
901 if (phymask & (1 << i)) {/* Internal PHY */
902 pm8001_set_phy_profile_single(pm8001_ha, i,
903 sizeof(phycfg_int) / sizeof(u32),
904 (u32 *)&phycfg_int);
905
906 } else { /* External PHY */
907 pm8001_set_phy_profile_single(pm8001_ha, i,
908 sizeof(phycfg_ext) / sizeof(u32),
909 (u32 *)&phycfg_ext);
910 }
911 }
912
913 return 0;
914}
915
916/**
917 * pm8001_configure_phy_settings - Configures PHY settings based on vendor ID.
918 * @pm8001_ha : our hba.
919 */
920static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
921{
922 switch (pm8001_ha->pdev->subsystem_vendor) {
923 case PCI_VENDOR_ID_ATTO:
924 if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
925 return 0;
926 else
927 return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
928
929 case PCI_VENDOR_ID_ADAPTEC2:
930 case 0:
931 return 0;
932
933 default:
934 return pm8001_get_phy_settings_info(pm8001_ha);
935 }
936}
937
938#ifdef PM8001_USE_MSIX
939/**
940 * pm8001_setup_msix - enable MSI-X interrupt
941 * @pm8001_ha: our ha struct.
942 */
943static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
944{
945 unsigned int allocated_irq_vectors;
946 int rc;
947
948 /* SPCv controllers supports 64 msi-x */
949 if (pm8001_ha->chip_id == chip_8001) {
950 rc = pci_alloc_irq_vectors(pm8001_ha->pdev, 1, 1,
951 PCI_IRQ_MSIX);
952 } else {
953 /*
954 * Queue index #0 is used always for housekeeping, so don't
955 * include in the affinity spreading.
956 */
957 struct irq_affinity desc = {
958 .pre_vectors = 1,
959 };
960 rc = pci_alloc_irq_vectors_affinity(
961 pm8001_ha->pdev, 2, PM8001_MAX_MSIX_VEC,
962 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, &desc);
963 }
964
965 allocated_irq_vectors = rc;
966 if (rc < 0)
967 return rc;
968
969 /* Assigns the number of interrupts */
970 pm8001_ha->number_of_intr = allocated_irq_vectors;
971
972 /* Maximum queue number updating in HBA structure */
973 pm8001_ha->max_q_num = allocated_irq_vectors;
974
975 pm8001_dbg(pm8001_ha, INIT,
976 "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
977 rc, pm8001_ha->number_of_intr);
978 return 0;
979}
980
981static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
982{
983 u32 i = 0, j = 0;
984 int flag = 0, rc = 0;
985 int nr_irqs = pm8001_ha->number_of_intr;
986
987 if (pm8001_ha->chip_id != chip_8001)
988 flag &= ~IRQF_SHARED;
989
990 pm8001_dbg(pm8001_ha, INIT,
991 "pci_enable_msix request number of intr %d\n",
992 pm8001_ha->number_of_intr);
993
994 if (nr_irqs > ARRAY_SIZE(pm8001_ha->intr_drvname))
995 nr_irqs = ARRAY_SIZE(pm8001_ha->intr_drvname);
996
997 for (i = 0; i < nr_irqs; i++) {
998 snprintf(pm8001_ha->intr_drvname[i],
999 sizeof(pm8001_ha->intr_drvname[0]),
1000 "%s-%d", pm8001_ha->name, i);
1001 pm8001_ha->irq_vector[i].irq_id = i;
1002 pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
1003
1004 rc = request_irq(pci_irq_vector(pm8001_ha->pdev, i),
1005 pm8001_interrupt_handler_msix, flag,
1006 pm8001_ha->intr_drvname[i],
1007 &(pm8001_ha->irq_vector[i]));
1008 if (rc) {
1009 for (j = 0; j < i; j++) {
1010 free_irq(pci_irq_vector(pm8001_ha->pdev, i),
1011 &(pm8001_ha->irq_vector[i]));
1012 }
1013 pci_free_irq_vectors(pm8001_ha->pdev);
1014 break;
1015 }
1016 }
1017
1018 return rc;
1019}
1020#endif
1021
1022static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha)
1023{
1024 struct pci_dev *pdev;
1025
1026 pdev = pm8001_ha->pdev;
1027
1028#ifdef PM8001_USE_MSIX
1029 if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
1030 return pm8001_setup_msix(pm8001_ha);
1031 pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
1032#endif
1033 return 0;
1034}
1035
1036/**
1037 * pm8001_request_irq - register interrupt
1038 * @pm8001_ha: our ha struct.
1039 */
1040static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
1041{
1042 struct pci_dev *pdev;
1043 int rc;
1044
1045 pdev = pm8001_ha->pdev;
1046
1047#ifdef PM8001_USE_MSIX
1048 if (pdev->msix_cap && pci_msi_enabled())
1049 return pm8001_request_msix(pm8001_ha);
1050 else {
1051 pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
1052 goto intx;
1053 }
1054#endif
1055
1056intx:
1057 /* initialize the INT-X interrupt */
1058 pm8001_ha->irq_vector[0].irq_id = 0;
1059 pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
1060 rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
1061 pm8001_ha->name, SHOST_TO_SAS_HA(pm8001_ha->shost));
1062 return rc;
1063}
1064
1065/**
1066 * pm8001_pci_probe - probe supported device
1067 * @pdev: pci device which kernel has been prepared for.
1068 * @ent: pci device id
1069 *
1070 * This function is the main initialization function, when register a new
1071 * pci driver it is invoked, all struct and hardware initialization should be
1072 * done here, also, register interrupt.
1073 */
1074static int pm8001_pci_probe(struct pci_dev *pdev,
1075 const struct pci_device_id *ent)
1076{
1077 unsigned int rc;
1078 u32 pci_reg;
1079 u8 i = 0;
1080 struct pm8001_hba_info *pm8001_ha;
1081 struct Scsi_Host *shost = NULL;
1082 const struct pm8001_chip_info *chip;
1083 struct sas_ha_struct *sha;
1084
1085 dev_printk(KERN_INFO, &pdev->dev,
1086 "pm80xx: driver version %s\n", DRV_VERSION);
1087 rc = pci_enable_device(pdev);
1088 if (rc)
1089 goto err_out_enable;
1090 pci_set_master(pdev);
1091 /*
1092 * Enable pci slot busmaster by setting pci command register.
1093 * This is required by FW for Cyclone card.
1094 */
1095
1096 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
1097 pci_reg |= 0x157;
1098 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
1099 rc = pci_request_regions(pdev, DRV_NAME);
1100 if (rc)
1101 goto err_out_disable;
1102 rc = pci_go_44(pdev);
1103 if (rc)
1104 goto err_out_regions;
1105
1106 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
1107 if (!shost) {
1108 rc = -ENOMEM;
1109 goto err_out_regions;
1110 }
1111 chip = &pm8001_chips[ent->driver_data];
1112 sha = kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
1113 if (!sha) {
1114 rc = -ENOMEM;
1115 goto err_out_free_host;
1116 }
1117 SHOST_TO_SAS_HA(shost) = sha;
1118
1119 rc = pm8001_prep_sas_ha_init(shost, chip);
1120 if (rc) {
1121 rc = -ENOMEM;
1122 goto err_out_free;
1123 }
1124 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
1125 /* ent->driver variable is used to differentiate between controllers */
1126 pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
1127 if (!pm8001_ha) {
1128 rc = -ENOMEM;
1129 goto err_out_free;
1130 }
1131
1132 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1133 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1134 if (rc) {
1135 pm8001_dbg(pm8001_ha, FAIL,
1136 "chip_init failed [ret: %d]\n", rc);
1137 goto err_out_ha_free;
1138 }
1139
1140 rc = pm8001_init_ccb_tag(pm8001_ha);
1141 if (rc)
1142 goto err_out_enable;
1143
1144
1145 PM8001_CHIP_DISP->chip_post_init(pm8001_ha);
1146
1147 if (pm8001_ha->number_of_intr > 1) {
1148 shost->nr_hw_queues = pm8001_ha->number_of_intr - 1;
1149 /*
1150 * For now, ensure we're not sent too many commands by setting
1151 * host_tagset. This is also required if we start using request
1152 * tag.
1153 */
1154 shost->host_tagset = 1;
1155 }
1156
1157 rc = scsi_add_host(shost, &pdev->dev);
1158 if (rc)
1159 goto err_out_ha_free;
1160
1161 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1162 if (pm8001_ha->chip_id != chip_8001) {
1163 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1164 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1165 /* setup thermal configuration. */
1166 pm80xx_set_thermal_config(pm8001_ha);
1167 }
1168
1169 pm8001_init_sas_add(pm8001_ha);
1170 /* phy setting support for motherboard controller */
1171 rc = pm8001_configure_phy_settings(pm8001_ha);
1172 if (rc)
1173 goto err_out_shost;
1174
1175 pm8001_post_sas_ha_init(shost, chip);
1176 rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
1177 if (rc) {
1178 pm8001_dbg(pm8001_ha, FAIL,
1179 "sas_register_ha failed [ret: %d]\n", rc);
1180 goto err_out_shost;
1181 }
1182 list_add_tail(&pm8001_ha->list, &hba_list);
1183 pm8001_ha->flags = PM8001F_RUN_TIME;
1184 scsi_scan_host(pm8001_ha->shost);
1185 return 0;
1186
1187err_out_shost:
1188 scsi_remove_host(pm8001_ha->shost);
1189err_out_ha_free:
1190 pm8001_free(pm8001_ha);
1191err_out_free:
1192 kfree(sha);
1193err_out_free_host:
1194 scsi_host_put(shost);
1195err_out_regions:
1196 pci_release_regions(pdev);
1197err_out_disable:
1198 pci_disable_device(pdev);
1199err_out_enable:
1200 return rc;
1201}
1202
1203/**
1204 * pm8001_init_ccb_tag - allocate memory to CCB and tag.
1205 * @pm8001_ha: our hba card information.
1206 */
1207static int pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha)
1208{
1209 struct Scsi_Host *shost = pm8001_ha->shost;
1210 struct device *dev = pm8001_ha->dev;
1211 u32 max_out_io, ccb_count;
1212 int i;
1213
1214 max_out_io = pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io;
1215 ccb_count = min_t(int, PM8001_MAX_CCB, max_out_io);
1216
1217 shost->can_queue = ccb_count - PM8001_RESERVE_SLOT;
1218
1219 pm8001_ha->rsvd_tags = bitmap_zalloc(PM8001_RESERVE_SLOT, GFP_KERNEL);
1220 if (!pm8001_ha->rsvd_tags)
1221 goto err_out;
1222
1223 /* Memory region for ccb_info*/
1224 pm8001_ha->ccb_count = ccb_count;
1225 pm8001_ha->ccb_info =
1226 kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL);
1227 if (!pm8001_ha->ccb_info) {
1228 pm8001_dbg(pm8001_ha, FAIL,
1229 "Unable to allocate memory for ccb\n");
1230 goto err_out_noccb;
1231 }
1232 for (i = 0; i < ccb_count; i++) {
1233 pm8001_ha->ccb_info[i].buf_prd = dma_alloc_coherent(dev,
1234 sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
1235 &pm8001_ha->ccb_info[i].ccb_dma_handle,
1236 GFP_KERNEL);
1237 if (!pm8001_ha->ccb_info[i].buf_prd) {
1238 pm8001_dbg(pm8001_ha, FAIL,
1239 "ccb prd memory allocation error\n");
1240 goto err_out;
1241 }
1242 pm8001_ha->ccb_info[i].task = NULL;
1243 pm8001_ha->ccb_info[i].ccb_tag = PM8001_INVALID_TAG;
1244 pm8001_ha->ccb_info[i].device = NULL;
1245 }
1246
1247 return 0;
1248
1249err_out_noccb:
1250 kfree(pm8001_ha->devices);
1251err_out:
1252 return -ENOMEM;
1253}
1254
1255static void pm8001_pci_remove(struct pci_dev *pdev)
1256{
1257 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1258 struct pm8001_hba_info *pm8001_ha;
1259 int i, j;
1260 pm8001_ha = sha->lldd_ha;
1261 sas_unregister_ha(sha);
1262 sas_remove_host(pm8001_ha->shost);
1263 list_del(&pm8001_ha->list);
1264 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1265 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1266
1267#ifdef PM8001_USE_MSIX
1268 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1269 synchronize_irq(pci_irq_vector(pdev, i));
1270 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1271 free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
1272 pci_free_irq_vectors(pdev);
1273#else
1274 free_irq(pm8001_ha->irq, sha);
1275#endif
1276#ifdef PM8001_USE_TASKLET
1277 /* For non-msix and msix interrupts */
1278 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1279 (pm8001_ha->chip_id == chip_8001))
1280 tasklet_kill(&pm8001_ha->tasklet[0]);
1281 else
1282 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1283 tasklet_kill(&pm8001_ha->tasklet[j]);
1284#endif
1285 scsi_host_put(pm8001_ha->shost);
1286
1287 for (i = 0; i < pm8001_ha->ccb_count; i++) {
1288 dma_free_coherent(&pm8001_ha->pdev->dev,
1289 sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
1290 pm8001_ha->ccb_info[i].buf_prd,
1291 pm8001_ha->ccb_info[i].ccb_dma_handle);
1292 }
1293 kfree(pm8001_ha->ccb_info);
1294 kfree(pm8001_ha->devices);
1295
1296 pm8001_free(pm8001_ha);
1297 kfree(sha->sas_phy);
1298 kfree(sha->sas_port);
1299 kfree(sha);
1300 pci_release_regions(pdev);
1301 pci_disable_device(pdev);
1302}
1303
1304/**
1305 * pm8001_pci_suspend - power management suspend main entry point
1306 * @dev: Device struct
1307 *
1308 * Return: 0 on success, anything else on error.
1309 */
1310static int __maybe_unused pm8001_pci_suspend(struct device *dev)
1311{
1312 struct pci_dev *pdev = to_pci_dev(dev);
1313 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1314 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
1315 int i, j;
1316 sas_suspend_ha(sha);
1317 flush_workqueue(pm8001_wq);
1318 scsi_block_requests(pm8001_ha->shost);
1319 if (!pdev->pm_cap) {
1320 dev_err(dev, " PCI PM not supported\n");
1321 return -ENODEV;
1322 }
1323 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1324 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1325#ifdef PM8001_USE_MSIX
1326 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1327 synchronize_irq(pci_irq_vector(pdev, i));
1328 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1329 free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
1330 pci_free_irq_vectors(pdev);
1331#else
1332 free_irq(pm8001_ha->irq, sha);
1333#endif
1334#ifdef PM8001_USE_TASKLET
1335 /* For non-msix and msix interrupts */
1336 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1337 (pm8001_ha->chip_id == chip_8001))
1338 tasklet_kill(&pm8001_ha->tasklet[0]);
1339 else
1340 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1341 tasklet_kill(&pm8001_ha->tasklet[j]);
1342#endif
1343 pm8001_info(pm8001_ha, "pdev=0x%p, slot=%s, entering "
1344 "suspended state\n", pdev,
1345 pm8001_ha->name);
1346 return 0;
1347}
1348
1349/**
1350 * pm8001_pci_resume - power management resume main entry point
1351 * @dev: Device struct
1352 *
1353 * Return: 0 on success, anything else on error.
1354 */
1355static int __maybe_unused pm8001_pci_resume(struct device *dev)
1356{
1357 struct pci_dev *pdev = to_pci_dev(dev);
1358 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1359 struct pm8001_hba_info *pm8001_ha;
1360 int rc;
1361 u8 i = 0, j;
1362 DECLARE_COMPLETION_ONSTACK(completion);
1363
1364 pm8001_ha = sha->lldd_ha;
1365
1366 pm8001_info(pm8001_ha,
1367 "pdev=0x%p, slot=%s, resuming from previous operating state [D%d]\n",
1368 pdev, pm8001_ha->name, pdev->current_state);
1369
1370 rc = pci_go_44(pdev);
1371 if (rc)
1372 goto err_out_disable;
1373 sas_prep_resume_ha(sha);
1374 /* chip soft rst only for spc */
1375 if (pm8001_ha->chip_id == chip_8001) {
1376 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1377 pm8001_dbg(pm8001_ha, INIT, "chip soft reset successful\n");
1378 }
1379 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1380 if (rc)
1381 goto err_out_disable;
1382
1383 /* disable all the interrupt bits */
1384 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1385
1386 rc = pm8001_request_irq(pm8001_ha);
1387 if (rc)
1388 goto err_out_disable;
1389#ifdef PM8001_USE_TASKLET
1390 /* Tasklet for non msi-x interrupt handler */
1391 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1392 (pm8001_ha->chip_id == chip_8001))
1393 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
1394 (unsigned long)&(pm8001_ha->irq_vector[0]));
1395 else
1396 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1397 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
1398 (unsigned long)&(pm8001_ha->irq_vector[j]));
1399#endif
1400 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1401 if (pm8001_ha->chip_id != chip_8001) {
1402 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1403 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1404 }
1405
1406 /* Chip documentation for the 8070 and 8072 SPCv */
1407 /* states that a 500ms minimum delay is required */
1408 /* before issuing commands. Otherwise, the firmware */
1409 /* will enter an unrecoverable state. */
1410
1411 if (pm8001_ha->chip_id == chip_8070 ||
1412 pm8001_ha->chip_id == chip_8072) {
1413 mdelay(500);
1414 }
1415
1416 /* Spin up the PHYs */
1417
1418 pm8001_ha->flags = PM8001F_RUN_TIME;
1419 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
1420 pm8001_ha->phy[i].enable_completion = &completion;
1421 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
1422 wait_for_completion(&completion);
1423 }
1424 sas_resume_ha(sha);
1425 return 0;
1426
1427err_out_disable:
1428 scsi_remove_host(pm8001_ha->shost);
1429
1430 return rc;
1431}
1432
1433/* update of pci device, vendor id and driver data with
1434 * unique value for each of the controller
1435 */
1436static struct pci_device_id pm8001_pci_table[] = {
1437 { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1438 { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
1439 { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
1440 { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
1441 /* Support for SPC/SPCv/SPCve controllers */
1442 { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1443 { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1444 { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1445 { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1446 { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1447 { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1448 { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1449 { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1450 { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1451 { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
1452 { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
1453 { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
1454 { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
1455 { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
1456 { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
1457 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1458 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1459 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1460 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1461 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1462 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1463 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1464 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1465 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1466 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1467 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1468 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1469 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1470 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1471 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1472 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1473 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1474 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1475 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1476 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1477 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1478 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
1479 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1480 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
1481 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1482 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
1483 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1484 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
1485 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1486 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
1487 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1488 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
1489 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1490 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
1491 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1492 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
1493 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1494 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
1495 { PCI_VENDOR_ID_ATTO, 0x8070,
1496 PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
1497 { PCI_VENDOR_ID_ATTO, 0x8070,
1498 PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
1499 { PCI_VENDOR_ID_ATTO, 0x8072,
1500 PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
1501 { PCI_VENDOR_ID_ATTO, 0x8072,
1502 PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
1503 { PCI_VENDOR_ID_ATTO, 0x8070,
1504 PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
1505 { PCI_VENDOR_ID_ATTO, 0x8072,
1506 PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
1507 { PCI_VENDOR_ID_ATTO, 0x8072,
1508 PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
1509 {} /* terminate list */
1510};
1511
1512static SIMPLE_DEV_PM_OPS(pm8001_pci_pm_ops,
1513 pm8001_pci_suspend,
1514 pm8001_pci_resume);
1515
1516static struct pci_driver pm8001_pci_driver = {
1517 .name = DRV_NAME,
1518 .id_table = pm8001_pci_table,
1519 .probe = pm8001_pci_probe,
1520 .remove = pm8001_pci_remove,
1521 .driver.pm = &pm8001_pci_pm_ops,
1522};
1523
1524/**
1525 * pm8001_init - initialize scsi transport template
1526 */
1527static int __init pm8001_init(void)
1528{
1529 int rc = -ENOMEM;
1530
1531 pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1532 if (!pm8001_wq)
1533 goto err;
1534
1535 pm8001_id = 0;
1536 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1537 if (!pm8001_stt)
1538 goto err_wq;
1539 rc = pci_register_driver(&pm8001_pci_driver);
1540 if (rc)
1541 goto err_tp;
1542 return 0;
1543
1544err_tp:
1545 sas_release_transport(pm8001_stt);
1546err_wq:
1547 destroy_workqueue(pm8001_wq);
1548err:
1549 return rc;
1550}
1551
1552static void __exit pm8001_exit(void)
1553{
1554 pci_unregister_driver(&pm8001_pci_driver);
1555 sas_release_transport(pm8001_stt);
1556 destroy_workqueue(pm8001_wq);
1557}
1558
1559module_init(pm8001_init);
1560module_exit(pm8001_exit);
1561
1562MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
1563MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
1564MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
1565MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
1566MODULE_DESCRIPTION(
1567 "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
1568 "SAS/SATA controller driver");
1569MODULE_VERSION(DRV_VERSION);
1570MODULE_LICENSE("GPL");
1571MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
1572