Loading...
1/*
2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41#include <linux/slab.h>
42#include "pm8001_sas.h"
43#include "pm8001_chips.h"
44
45static struct scsi_transport_template *pm8001_stt;
46
47/**
48 * chip info structure to identify chip key functionality as
49 * encryption available/not, no of ports, hw specific function ref
50 */
51static const struct pm8001_chip_info pm8001_chips[] = {
52 [chip_8001] = {0, 8, &pm8001_8001_dispatch,},
53 [chip_8008] = {0, 8, &pm8001_80xx_dispatch,},
54 [chip_8009] = {1, 8, &pm8001_80xx_dispatch,},
55 [chip_8018] = {0, 16, &pm8001_80xx_dispatch,},
56 [chip_8019] = {1, 16, &pm8001_80xx_dispatch,},
57 [chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
58 [chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
59 [chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
60 [chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
61 [chip_8070] = {0, 8, &pm8001_80xx_dispatch,},
62 [chip_8072] = {0, 16, &pm8001_80xx_dispatch,},
63};
64static int pm8001_id;
65
66LIST_HEAD(hba_list);
67
68struct workqueue_struct *pm8001_wq;
69
70/**
71 * The main structure which LLDD must register for scsi core.
72 */
73static struct scsi_host_template pm8001_sht = {
74 .module = THIS_MODULE,
75 .name = DRV_NAME,
76 .queuecommand = sas_queuecommand,
77 .target_alloc = sas_target_alloc,
78 .slave_configure = sas_slave_configure,
79 .scan_finished = pm8001_scan_finished,
80 .scan_start = pm8001_scan_start,
81 .change_queue_depth = sas_change_queue_depth,
82 .bios_param = sas_bios_param,
83 .can_queue = 1,
84 .this_id = -1,
85 .sg_tablesize = SG_ALL,
86 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
87 .use_clustering = ENABLE_CLUSTERING,
88 .eh_device_reset_handler = sas_eh_device_reset_handler,
89 .eh_bus_reset_handler = sas_eh_bus_reset_handler,
90 .target_destroy = sas_target_destroy,
91 .ioctl = sas_ioctl,
92 .shost_attrs = pm8001_host_attrs,
93 .track_queue_depth = 1,
94};
95
96/**
97 * Sas layer call this function to execute specific task.
98 */
99static struct sas_domain_function_template pm8001_transport_ops = {
100 .lldd_dev_found = pm8001_dev_found,
101 .lldd_dev_gone = pm8001_dev_gone,
102
103 .lldd_execute_task = pm8001_queue_command,
104 .lldd_control_phy = pm8001_phy_control,
105
106 .lldd_abort_task = pm8001_abort_task,
107 .lldd_abort_task_set = pm8001_abort_task_set,
108 .lldd_clear_aca = pm8001_clear_aca,
109 .lldd_clear_task_set = pm8001_clear_task_set,
110 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
111 .lldd_lu_reset = pm8001_lu_reset,
112 .lldd_query_task = pm8001_query_task,
113};
114
115/**
116 *pm8001_phy_init - initiate our adapter phys
117 *@pm8001_ha: our hba structure.
118 *@phy_id: phy id.
119 */
120static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
121{
122 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
123 struct asd_sas_phy *sas_phy = &phy->sas_phy;
124 phy->phy_state = 0;
125 phy->pm8001_ha = pm8001_ha;
126 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
127 sas_phy->class = SAS;
128 sas_phy->iproto = SAS_PROTOCOL_ALL;
129 sas_phy->tproto = 0;
130 sas_phy->type = PHY_TYPE_PHYSICAL;
131 sas_phy->role = PHY_ROLE_INITIATOR;
132 sas_phy->oob_mode = OOB_NOT_CONNECTED;
133 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
134 sas_phy->id = phy_id;
135 sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
136 sas_phy->frame_rcvd = &phy->frame_rcvd[0];
137 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
138 sas_phy->lldd_phy = phy;
139}
140
141/**
142 *pm8001_free - free hba
143 *@pm8001_ha: our hba structure.
144 *
145 */
146static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
147{
148 int i;
149
150 if (!pm8001_ha)
151 return;
152
153 for (i = 0; i < USI_MAX_MEMCNT; i++) {
154 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
155 pci_free_consistent(pm8001_ha->pdev,
156 (pm8001_ha->memoryMap.region[i].total_len +
157 pm8001_ha->memoryMap.region[i].alignment),
158 pm8001_ha->memoryMap.region[i].virt_ptr,
159 pm8001_ha->memoryMap.region[i].phys_addr);
160 }
161 }
162 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
163 if (pm8001_ha->shost)
164 scsi_host_put(pm8001_ha->shost);
165 flush_workqueue(pm8001_wq);
166 kfree(pm8001_ha->tags);
167 kfree(pm8001_ha);
168}
169
170#ifdef PM8001_USE_TASKLET
171
172/**
173 * tasklet for 64 msi-x interrupt handler
174 * @opaque: the passed general host adapter struct
175 * Note: pm8001_tasklet is common for pm8001 & pm80xx
176 */
177static void pm8001_tasklet(unsigned long opaque)
178{
179 struct pm8001_hba_info *pm8001_ha;
180 struct isr_param *irq_vector;
181
182 irq_vector = (struct isr_param *)opaque;
183 pm8001_ha = irq_vector->drv_inst;
184 if (unlikely(!pm8001_ha))
185 BUG_ON(1);
186 PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
187}
188#endif
189
190/**
191 * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
192 * It obtains the vector number and calls the equivalent bottom
193 * half or services directly.
194 * @opaque: the passed outbound queue/vector. Host structure is
195 * retrieved from the same.
196 */
197static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
198{
199 struct isr_param *irq_vector;
200 struct pm8001_hba_info *pm8001_ha;
201 irqreturn_t ret = IRQ_HANDLED;
202 irq_vector = (struct isr_param *)opaque;
203 pm8001_ha = irq_vector->drv_inst;
204
205 if (unlikely(!pm8001_ha))
206 return IRQ_NONE;
207 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
208 return IRQ_NONE;
209#ifdef PM8001_USE_TASKLET
210 tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
211#else
212 ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
213#endif
214 return ret;
215}
216
217/**
218 * pm8001_interrupt_handler_intx - main INTx interrupt handler.
219 * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
220 */
221
222static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
223{
224 struct pm8001_hba_info *pm8001_ha;
225 irqreturn_t ret = IRQ_HANDLED;
226 struct sas_ha_struct *sha = dev_id;
227 pm8001_ha = sha->lldd_ha;
228 if (unlikely(!pm8001_ha))
229 return IRQ_NONE;
230 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
231 return IRQ_NONE;
232
233#ifdef PM8001_USE_TASKLET
234 tasklet_schedule(&pm8001_ha->tasklet[0]);
235#else
236 ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
237#endif
238 return ret;
239}
240
241/**
242 * pm8001_alloc - initiate our hba structure and 6 DMAs area.
243 * @pm8001_ha:our hba structure.
244 *
245 */
246static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
247 const struct pci_device_id *ent)
248{
249 int i;
250 spin_lock_init(&pm8001_ha->lock);
251 spin_lock_init(&pm8001_ha->bitmap_lock);
252 PM8001_INIT_DBG(pm8001_ha,
253 pm8001_printk("pm8001_alloc: PHY:%x\n",
254 pm8001_ha->chip->n_phy));
255 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
256 pm8001_phy_init(pm8001_ha, i);
257 pm8001_ha->port[i].wide_port_phymap = 0;
258 pm8001_ha->port[i].port_attached = 0;
259 pm8001_ha->port[i].port_state = 0;
260 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
261 }
262
263 pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
264 if (!pm8001_ha->tags)
265 goto err_out;
266 /* MPI Memory region 1 for AAP Event Log for fw */
267 pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
268 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
269 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
270 pm8001_ha->memoryMap.region[AAP1].alignment = 32;
271
272 /* MPI Memory region 2 for IOP Event Log for fw */
273 pm8001_ha->memoryMap.region[IOP].num_elements = 1;
274 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
275 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
276 pm8001_ha->memoryMap.region[IOP].alignment = 32;
277
278 for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
279 /* MPI Memory region 3 for consumer Index of inbound queues */
280 pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
281 pm8001_ha->memoryMap.region[CI+i].element_size = 4;
282 pm8001_ha->memoryMap.region[CI+i].total_len = 4;
283 pm8001_ha->memoryMap.region[CI+i].alignment = 4;
284
285 if ((ent->driver_data) != chip_8001) {
286 /* MPI Memory region 5 inbound queues */
287 pm8001_ha->memoryMap.region[IB+i].num_elements =
288 PM8001_MPI_QUEUE;
289 pm8001_ha->memoryMap.region[IB+i].element_size = 128;
290 pm8001_ha->memoryMap.region[IB+i].total_len =
291 PM8001_MPI_QUEUE * 128;
292 pm8001_ha->memoryMap.region[IB+i].alignment = 128;
293 } else {
294 pm8001_ha->memoryMap.region[IB+i].num_elements =
295 PM8001_MPI_QUEUE;
296 pm8001_ha->memoryMap.region[IB+i].element_size = 64;
297 pm8001_ha->memoryMap.region[IB+i].total_len =
298 PM8001_MPI_QUEUE * 64;
299 pm8001_ha->memoryMap.region[IB+i].alignment = 64;
300 }
301 }
302
303 for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
304 /* MPI Memory region 4 for producer Index of outbound queues */
305 pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
306 pm8001_ha->memoryMap.region[PI+i].element_size = 4;
307 pm8001_ha->memoryMap.region[PI+i].total_len = 4;
308 pm8001_ha->memoryMap.region[PI+i].alignment = 4;
309
310 if (ent->driver_data != chip_8001) {
311 /* MPI Memory region 6 Outbound queues */
312 pm8001_ha->memoryMap.region[OB+i].num_elements =
313 PM8001_MPI_QUEUE;
314 pm8001_ha->memoryMap.region[OB+i].element_size = 128;
315 pm8001_ha->memoryMap.region[OB+i].total_len =
316 PM8001_MPI_QUEUE * 128;
317 pm8001_ha->memoryMap.region[OB+i].alignment = 128;
318 } else {
319 /* MPI Memory region 6 Outbound queues */
320 pm8001_ha->memoryMap.region[OB+i].num_elements =
321 PM8001_MPI_QUEUE;
322 pm8001_ha->memoryMap.region[OB+i].element_size = 64;
323 pm8001_ha->memoryMap.region[OB+i].total_len =
324 PM8001_MPI_QUEUE * 64;
325 pm8001_ha->memoryMap.region[OB+i].alignment = 64;
326 }
327
328 }
329 /* Memory region write DMA*/
330 pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
331 pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
332 pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
333 /* Memory region for devices*/
334 pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
335 pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
336 sizeof(struct pm8001_device);
337 pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
338 sizeof(struct pm8001_device);
339
340 /* Memory region for ccb_info*/
341 pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
342 pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
343 sizeof(struct pm8001_ccb_info);
344 pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
345 sizeof(struct pm8001_ccb_info);
346
347 /* Memory region for fw flash */
348 pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
349
350 pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
351 pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
352 pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
353 pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
354 for (i = 0; i < USI_MAX_MEMCNT; i++) {
355 if (pm8001_mem_alloc(pm8001_ha->pdev,
356 &pm8001_ha->memoryMap.region[i].virt_ptr,
357 &pm8001_ha->memoryMap.region[i].phys_addr,
358 &pm8001_ha->memoryMap.region[i].phys_addr_hi,
359 &pm8001_ha->memoryMap.region[i].phys_addr_lo,
360 pm8001_ha->memoryMap.region[i].total_len,
361 pm8001_ha->memoryMap.region[i].alignment) != 0) {
362 PM8001_FAIL_DBG(pm8001_ha,
363 pm8001_printk("Mem%d alloc failed\n",
364 i));
365 goto err_out;
366 }
367 }
368
369 pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
370 for (i = 0; i < PM8001_MAX_DEVICES; i++) {
371 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
372 pm8001_ha->devices[i].id = i;
373 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
374 pm8001_ha->devices[i].running_req = 0;
375 }
376 pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
377 for (i = 0; i < PM8001_MAX_CCB; i++) {
378 pm8001_ha->ccb_info[i].ccb_dma_handle =
379 pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
380 i * sizeof(struct pm8001_ccb_info);
381 pm8001_ha->ccb_info[i].task = NULL;
382 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
383 pm8001_ha->ccb_info[i].device = NULL;
384 ++pm8001_ha->tags_num;
385 }
386 pm8001_ha->flags = PM8001F_INIT_TIME;
387 /* Initialize tags */
388 pm8001_tag_init(pm8001_ha);
389 return 0;
390err_out:
391 return 1;
392}
393
394/**
395 * pm8001_ioremap - remap the pci high physical address to kernal virtual
396 * address so that we can access them.
397 * @pm8001_ha:our hba structure.
398 */
399static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
400{
401 u32 bar;
402 u32 logicalBar = 0;
403 struct pci_dev *pdev;
404
405 pdev = pm8001_ha->pdev;
406 /* map pci mem (PMC pci base 0-3)*/
407 for (bar = 0; bar < 6; bar++) {
408 /*
409 ** logical BARs for SPC:
410 ** bar 0 and 1 - logical BAR0
411 ** bar 2 and 3 - logical BAR1
412 ** bar4 - logical BAR2
413 ** bar5 - logical BAR3
414 ** Skip the appropriate assignments:
415 */
416 if ((bar == 1) || (bar == 3))
417 continue;
418 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
419 pm8001_ha->io_mem[logicalBar].membase =
420 pci_resource_start(pdev, bar);
421 pm8001_ha->io_mem[logicalBar].memsize =
422 pci_resource_len(pdev, bar);
423 pm8001_ha->io_mem[logicalBar].memvirtaddr =
424 ioremap(pm8001_ha->io_mem[logicalBar].membase,
425 pm8001_ha->io_mem[logicalBar].memsize);
426 PM8001_INIT_DBG(pm8001_ha,
427 pm8001_printk("PCI: bar %d, logicalBar %d ",
428 bar, logicalBar));
429 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
430 "base addr %llx virt_addr=%llx len=%d\n",
431 (u64)pm8001_ha->io_mem[logicalBar].membase,
432 (u64)(unsigned long)
433 pm8001_ha->io_mem[logicalBar].memvirtaddr,
434 pm8001_ha->io_mem[logicalBar].memsize));
435 } else {
436 pm8001_ha->io_mem[logicalBar].membase = 0;
437 pm8001_ha->io_mem[logicalBar].memsize = 0;
438 pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
439 }
440 logicalBar++;
441 }
442 return 0;
443}
444
445/**
446 * pm8001_pci_alloc - initialize our ha card structure
447 * @pdev: pci device.
448 * @ent: ent
449 * @shost: scsi host struct which has been initialized before.
450 */
451static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
452 const struct pci_device_id *ent,
453 struct Scsi_Host *shost)
454
455{
456 struct pm8001_hba_info *pm8001_ha;
457 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
458 int j;
459
460 pm8001_ha = sha->lldd_ha;
461 if (!pm8001_ha)
462 return NULL;
463
464 pm8001_ha->pdev = pdev;
465 pm8001_ha->dev = &pdev->dev;
466 pm8001_ha->chip_id = ent->driver_data;
467 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
468 pm8001_ha->irq = pdev->irq;
469 pm8001_ha->sas = sha;
470 pm8001_ha->shost = shost;
471 pm8001_ha->id = pm8001_id++;
472 pm8001_ha->logging_level = 0x01;
473 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
474 /* IOMB size is 128 for 8088/89 controllers */
475 if (pm8001_ha->chip_id != chip_8001)
476 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
477 else
478 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
479
480#ifdef PM8001_USE_TASKLET
481 /* Tasklet for non msi-x interrupt handler */
482 if ((!pdev->msix_cap || !pci_msi_enabled())
483 || (pm8001_ha->chip_id == chip_8001))
484 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
485 (unsigned long)&(pm8001_ha->irq_vector[0]));
486 else
487 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
488 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
489 (unsigned long)&(pm8001_ha->irq_vector[j]));
490#endif
491 pm8001_ioremap(pm8001_ha);
492 if (!pm8001_alloc(pm8001_ha, ent))
493 return pm8001_ha;
494 pm8001_free(pm8001_ha);
495 return NULL;
496}
497
498/**
499 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
500 * @pdev: pci device.
501 */
502static int pci_go_44(struct pci_dev *pdev)
503{
504 int rc;
505
506 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
507 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
508 if (rc) {
509 rc = pci_set_consistent_dma_mask(pdev,
510 DMA_BIT_MASK(32));
511 if (rc) {
512 dev_printk(KERN_ERR, &pdev->dev,
513 "44-bit DMA enable failed\n");
514 return rc;
515 }
516 }
517 } else {
518 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
519 if (rc) {
520 dev_printk(KERN_ERR, &pdev->dev,
521 "32-bit DMA enable failed\n");
522 return rc;
523 }
524 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
525 if (rc) {
526 dev_printk(KERN_ERR, &pdev->dev,
527 "32-bit consistent DMA enable failed\n");
528 return rc;
529 }
530 }
531 return rc;
532}
533
534/**
535 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
536 * @shost: scsi host which has been allocated outside.
537 * @chip_info: our ha struct.
538 */
539static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
540 const struct pm8001_chip_info *chip_info)
541{
542 int phy_nr, port_nr;
543 struct asd_sas_phy **arr_phy;
544 struct asd_sas_port **arr_port;
545 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
546
547 phy_nr = chip_info->n_phy;
548 port_nr = phy_nr;
549 memset(sha, 0x00, sizeof(*sha));
550 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
551 if (!arr_phy)
552 goto exit;
553 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
554 if (!arr_port)
555 goto exit_free2;
556
557 sha->sas_phy = arr_phy;
558 sha->sas_port = arr_port;
559 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
560 if (!sha->lldd_ha)
561 goto exit_free1;
562
563 shost->transportt = pm8001_stt;
564 shost->max_id = PM8001_MAX_DEVICES;
565 shost->max_lun = 8;
566 shost->max_channel = 0;
567 shost->unique_id = pm8001_id;
568 shost->max_cmd_len = 16;
569 shost->can_queue = PM8001_CAN_QUEUE;
570 shost->cmd_per_lun = 32;
571 return 0;
572exit_free1:
573 kfree(arr_port);
574exit_free2:
575 kfree(arr_phy);
576exit:
577 return -1;
578}
579
580/**
581 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
582 * @shost: scsi host which has been allocated outside
583 * @chip_info: our ha struct.
584 */
585static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
586 const struct pm8001_chip_info *chip_info)
587{
588 int i = 0;
589 struct pm8001_hba_info *pm8001_ha;
590 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
591
592 pm8001_ha = sha->lldd_ha;
593 for (i = 0; i < chip_info->n_phy; i++) {
594 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
595 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
596 }
597 sha->sas_ha_name = DRV_NAME;
598 sha->dev = pm8001_ha->dev;
599
600 sha->lldd_module = THIS_MODULE;
601 sha->sas_addr = &pm8001_ha->sas_addr[0];
602 sha->num_phys = chip_info->n_phy;
603 sha->core.shost = shost;
604}
605
606/**
607 * pm8001_init_sas_add - initialize sas address
608 * @chip_info: our ha struct.
609 *
610 * Currently we just set the fixed SAS address to our HBA,for manufacture,
611 * it should read from the EEPROM
612 */
613static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
614{
615 u8 i, j;
616#ifdef PM8001_READ_VPD
617 /* For new SPC controllers WWN is stored in flash vpd
618 * For SPC/SPCve controllers WWN is stored in EEPROM
619 * For Older SPC WWN is stored in NVMD
620 */
621 DECLARE_COMPLETION_ONSTACK(completion);
622 struct pm8001_ioctl_payload payload;
623 u16 deviceid;
624 int rc;
625
626 pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
627 pm8001_ha->nvmd_completion = &completion;
628
629 if (pm8001_ha->chip_id == chip_8001) {
630 if (deviceid == 0x8081 || deviceid == 0x0042) {
631 payload.minor_function = 4;
632 payload.length = 4096;
633 } else {
634 payload.minor_function = 0;
635 payload.length = 128;
636 }
637 } else if ((pm8001_ha->chip_id == chip_8070 ||
638 pm8001_ha->chip_id == chip_8072) &&
639 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
640 payload.minor_function = 4;
641 payload.length = 4096;
642 } else {
643 payload.minor_function = 1;
644 payload.length = 4096;
645 }
646 payload.offset = 0;
647 payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
648 if (!payload.func_specific) {
649 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
650 return;
651 }
652 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
653 if (rc) {
654 kfree(payload.func_specific);
655 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
656 return;
657 }
658 wait_for_completion(&completion);
659
660 for (i = 0, j = 0; i <= 7; i++, j++) {
661 if (pm8001_ha->chip_id == chip_8001) {
662 if (deviceid == 0x8081)
663 pm8001_ha->sas_addr[j] =
664 payload.func_specific[0x704 + i];
665 else if (deviceid == 0x0042)
666 pm8001_ha->sas_addr[j] =
667 payload.func_specific[0x010 + i];
668 } else if ((pm8001_ha->chip_id == chip_8070 ||
669 pm8001_ha->chip_id == chip_8072) &&
670 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
671 pm8001_ha->sas_addr[j] =
672 payload.func_specific[0x010 + i];
673 } else
674 pm8001_ha->sas_addr[j] =
675 payload.func_specific[0x804 + i];
676 }
677
678 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
679 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
680 pm8001_ha->sas_addr, SAS_ADDR_SIZE);
681 PM8001_INIT_DBG(pm8001_ha,
682 pm8001_printk("phy %d sas_addr = %016llx\n", i,
683 pm8001_ha->phy[i].dev_sas_addr));
684 }
685 kfree(payload.func_specific);
686#else
687 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
688 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
689 pm8001_ha->phy[i].dev_sas_addr =
690 cpu_to_be64((u64)
691 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
692 }
693 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
694 SAS_ADDR_SIZE);
695#endif
696}
697
698/*
699 * pm8001_get_phy_settings_info : Read phy setting values.
700 * @pm8001_ha : our hba.
701 */
702static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
703{
704
705#ifdef PM8001_READ_VPD
706 /*OPTION ROM FLASH read for the SPC cards */
707 DECLARE_COMPLETION_ONSTACK(completion);
708 struct pm8001_ioctl_payload payload;
709 int rc;
710
711 pm8001_ha->nvmd_completion = &completion;
712 /* SAS ADDRESS read from flash / EEPROM */
713 payload.minor_function = 6;
714 payload.offset = 0;
715 payload.length = 4096;
716 payload.func_specific = kzalloc(4096, GFP_KERNEL);
717 if (!payload.func_specific)
718 return -ENOMEM;
719 /* Read phy setting values from flash */
720 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
721 if (rc) {
722 kfree(payload.func_specific);
723 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
724 return -ENOMEM;
725 }
726 wait_for_completion(&completion);
727 pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
728 kfree(payload.func_specific);
729#endif
730 return 0;
731}
732
733struct pm8001_mpi3_phy_pg_trx_config {
734 u32 LaneLosCfg;
735 u32 LanePgaCfg1;
736 u32 LanePisoCfg1;
737 u32 LanePisoCfg2;
738 u32 LanePisoCfg3;
739 u32 LanePisoCfg4;
740 u32 LanePisoCfg5;
741 u32 LanePisoCfg6;
742 u32 LaneBctCtrl;
743};
744
745/**
746 * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
747 * @pm8001_ha : our adapter
748 * @phycfg : PHY config page to populate
749 */
750static
751void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
752 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
753{
754 phycfg->LaneLosCfg = 0x00000132;
755 phycfg->LanePgaCfg1 = 0x00203949;
756 phycfg->LanePisoCfg1 = 0x000000FF;
757 phycfg->LanePisoCfg2 = 0xFF000001;
758 phycfg->LanePisoCfg3 = 0xE7011300;
759 phycfg->LanePisoCfg4 = 0x631C40C0;
760 phycfg->LanePisoCfg5 = 0xF8102036;
761 phycfg->LanePisoCfg6 = 0xF74A1000;
762 phycfg->LaneBctCtrl = 0x00FB33F8;
763}
764
765/**
766 * pm8001_get_external_phy_settings : Retrieves the external PHY settings
767 * @pm8001_ha : our adapter
768 * @phycfg : PHY config page to populate
769 */
770static
771void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
772 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
773{
774 phycfg->LaneLosCfg = 0x00000132;
775 phycfg->LanePgaCfg1 = 0x00203949;
776 phycfg->LanePisoCfg1 = 0x000000FF;
777 phycfg->LanePisoCfg2 = 0xFF000001;
778 phycfg->LanePisoCfg3 = 0xE7011300;
779 phycfg->LanePisoCfg4 = 0x63349140;
780 phycfg->LanePisoCfg5 = 0xF8102036;
781 phycfg->LanePisoCfg6 = 0xF80D9300;
782 phycfg->LaneBctCtrl = 0x00FB33F8;
783}
784
785/**
786 * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
787 * @pm8001_ha : our adapter
788 * @phymask : The PHY mask
789 */
790static
791void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
792{
793 switch (pm8001_ha->pdev->subsystem_device) {
794 case 0x0070: /* H1280 - 8 external 0 internal */
795 case 0x0072: /* H12F0 - 16 external 0 internal */
796 *phymask = 0x0000;
797 break;
798
799 case 0x0071: /* H1208 - 0 external 8 internal */
800 case 0x0073: /* H120F - 0 external 16 internal */
801 *phymask = 0xFFFF;
802 break;
803
804 case 0x0080: /* H1244 - 4 external 4 internal */
805 *phymask = 0x00F0;
806 break;
807
808 case 0x0081: /* H1248 - 4 external 8 internal */
809 *phymask = 0x0FF0;
810 break;
811
812 case 0x0082: /* H1288 - 8 external 8 internal */
813 *phymask = 0xFF00;
814 break;
815
816 default:
817 PM8001_INIT_DBG(pm8001_ha,
818 pm8001_printk("Unknown subsystem device=0x%.04x",
819 pm8001_ha->pdev->subsystem_device));
820 }
821}
822
823/**
824 * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings
825 * @pm8001_ha : our adapter
826 */
827static
828int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
829{
830 struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
831 struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
832 int phymask = 0;
833 int i = 0;
834
835 memset(&phycfg_int, 0, sizeof(phycfg_int));
836 memset(&phycfg_ext, 0, sizeof(phycfg_ext));
837
838 pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
839 pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
840 pm8001_get_phy_mask(pm8001_ha, &phymask);
841
842 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
843 if (phymask & (1 << i)) {/* Internal PHY */
844 pm8001_set_phy_profile_single(pm8001_ha, i,
845 sizeof(phycfg_int) / sizeof(u32),
846 (u32 *)&phycfg_int);
847
848 } else { /* External PHY */
849 pm8001_set_phy_profile_single(pm8001_ha, i,
850 sizeof(phycfg_ext) / sizeof(u32),
851 (u32 *)&phycfg_ext);
852 }
853 }
854
855 return 0;
856}
857
858/**
859 * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
860 * @pm8001_ha : our hba.
861 */
862static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
863{
864 switch (pm8001_ha->pdev->subsystem_vendor) {
865 case PCI_VENDOR_ID_ATTO:
866 if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
867 return 0;
868 else
869 return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
870
871 case PCI_VENDOR_ID_ADAPTEC2:
872 case 0:
873 return 0;
874
875 default:
876 return pm8001_get_phy_settings_info(pm8001_ha);
877 }
878}
879
880#ifdef PM8001_USE_MSIX
881/**
882 * pm8001_setup_msix - enable MSI-X interrupt
883 * @chip_info: our ha struct.
884 * @irq_handler: irq_handler
885 */
886static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
887{
888 u32 i = 0, j = 0;
889 u32 number_of_intr;
890 int flag = 0;
891 u32 max_entry;
892 int rc;
893 static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3];
894
895 /* SPCv controllers supports 64 msi-x */
896 if (pm8001_ha->chip_id == chip_8001) {
897 number_of_intr = 1;
898 } else {
899 number_of_intr = PM8001_MAX_MSIX_VEC;
900 flag &= ~IRQF_SHARED;
901 }
902
903 max_entry = sizeof(pm8001_ha->msix_entries) /
904 sizeof(pm8001_ha->msix_entries[0]);
905 for (i = 0; i < max_entry ; i++)
906 pm8001_ha->msix_entries[i].entry = i;
907 rc = pci_enable_msix_exact(pm8001_ha->pdev, pm8001_ha->msix_entries,
908 number_of_intr);
909 pm8001_ha->number_of_intr = number_of_intr;
910 if (rc)
911 return rc;
912
913 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
914 "pci_enable_msix_exact request ret:%d no of intr %d\n",
915 rc, pm8001_ha->number_of_intr));
916
917 for (i = 0; i < number_of_intr; i++) {
918 snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
919 DRV_NAME"%d", i);
920 pm8001_ha->irq_vector[i].irq_id = i;
921 pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
922
923 rc = request_irq(pm8001_ha->msix_entries[i].vector,
924 pm8001_interrupt_handler_msix, flag,
925 intr_drvname[i], &(pm8001_ha->irq_vector[i]));
926 if (rc) {
927 for (j = 0; j < i; j++) {
928 free_irq(pm8001_ha->msix_entries[j].vector,
929 &(pm8001_ha->irq_vector[i]));
930 }
931 pci_disable_msix(pm8001_ha->pdev);
932 break;
933 }
934 }
935
936 return rc;
937}
938#endif
939
940/**
941 * pm8001_request_irq - register interrupt
942 * @chip_info: our ha struct.
943 */
944static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
945{
946 struct pci_dev *pdev;
947 int rc;
948
949 pdev = pm8001_ha->pdev;
950
951#ifdef PM8001_USE_MSIX
952 if (pdev->msix_cap && pci_msi_enabled())
953 return pm8001_setup_msix(pm8001_ha);
954 else {
955 PM8001_INIT_DBG(pm8001_ha,
956 pm8001_printk("MSIX not supported!!!\n"));
957 goto intx;
958 }
959#endif
960
961intx:
962 /* initialize the INT-X interrupt */
963 pm8001_ha->irq_vector[0].irq_id = 0;
964 pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
965 rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
966 DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
967 return rc;
968}
969
970/**
971 * pm8001_pci_probe - probe supported device
972 * @pdev: pci device which kernel has been prepared for.
973 * @ent: pci device id
974 *
975 * This function is the main initialization function, when register a new
976 * pci driver it is invoked, all struct an hardware initilization should be done
977 * here, also, register interrupt
978 */
979static int pm8001_pci_probe(struct pci_dev *pdev,
980 const struct pci_device_id *ent)
981{
982 unsigned int rc;
983 u32 pci_reg;
984 u8 i = 0;
985 struct pm8001_hba_info *pm8001_ha;
986 struct Scsi_Host *shost = NULL;
987 const struct pm8001_chip_info *chip;
988
989 dev_printk(KERN_INFO, &pdev->dev,
990 "pm80xx: driver version %s\n", DRV_VERSION);
991 rc = pci_enable_device(pdev);
992 if (rc)
993 goto err_out_enable;
994 pci_set_master(pdev);
995 /*
996 * Enable pci slot busmaster by setting pci command register.
997 * This is required by FW for Cyclone card.
998 */
999
1000 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
1001 pci_reg |= 0x157;
1002 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
1003 rc = pci_request_regions(pdev, DRV_NAME);
1004 if (rc)
1005 goto err_out_disable;
1006 rc = pci_go_44(pdev);
1007 if (rc)
1008 goto err_out_regions;
1009
1010 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
1011 if (!shost) {
1012 rc = -ENOMEM;
1013 goto err_out_regions;
1014 }
1015 chip = &pm8001_chips[ent->driver_data];
1016 SHOST_TO_SAS_HA(shost) =
1017 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
1018 if (!SHOST_TO_SAS_HA(shost)) {
1019 rc = -ENOMEM;
1020 goto err_out_free_host;
1021 }
1022
1023 rc = pm8001_prep_sas_ha_init(shost, chip);
1024 if (rc) {
1025 rc = -ENOMEM;
1026 goto err_out_free;
1027 }
1028 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
1029 /* ent->driver variable is used to differentiate between controllers */
1030 pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
1031 if (!pm8001_ha) {
1032 rc = -ENOMEM;
1033 goto err_out_free;
1034 }
1035 list_add_tail(&pm8001_ha->list, &hba_list);
1036 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1037 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1038 if (rc) {
1039 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
1040 "chip_init failed [ret: %d]\n", rc));
1041 goto err_out_ha_free;
1042 }
1043
1044 rc = scsi_add_host(shost, &pdev->dev);
1045 if (rc)
1046 goto err_out_ha_free;
1047 rc = pm8001_request_irq(pm8001_ha);
1048 if (rc) {
1049 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
1050 "pm8001_request_irq failed [ret: %d]\n", rc));
1051 goto err_out_shost;
1052 }
1053
1054 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1055 if (pm8001_ha->chip_id != chip_8001) {
1056 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1057 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1058 /* setup thermal configuration. */
1059 pm80xx_set_thermal_config(pm8001_ha);
1060 }
1061
1062 pm8001_init_sas_add(pm8001_ha);
1063 /* phy setting support for motherboard controller */
1064 if (pm8001_configure_phy_settings(pm8001_ha))
1065 goto err_out_shost;
1066
1067 pm8001_post_sas_ha_init(shost, chip);
1068 rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
1069 if (rc)
1070 goto err_out_shost;
1071 scsi_scan_host(pm8001_ha->shost);
1072 return 0;
1073
1074err_out_shost:
1075 scsi_remove_host(pm8001_ha->shost);
1076err_out_ha_free:
1077 pm8001_free(pm8001_ha);
1078err_out_free:
1079 kfree(SHOST_TO_SAS_HA(shost));
1080err_out_free_host:
1081 kfree(shost);
1082err_out_regions:
1083 pci_release_regions(pdev);
1084err_out_disable:
1085 pci_disable_device(pdev);
1086err_out_enable:
1087 return rc;
1088}
1089
1090static void pm8001_pci_remove(struct pci_dev *pdev)
1091{
1092 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1093 struct pm8001_hba_info *pm8001_ha;
1094 int i, j;
1095 pm8001_ha = sha->lldd_ha;
1096 scsi_remove_host(pm8001_ha->shost);
1097 sas_unregister_ha(sha);
1098 sas_remove_host(pm8001_ha->shost);
1099 list_del(&pm8001_ha->list);
1100 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1101 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1102
1103#ifdef PM8001_USE_MSIX
1104 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1105 synchronize_irq(pm8001_ha->msix_entries[i].vector);
1106 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1107 free_irq(pm8001_ha->msix_entries[i].vector,
1108 &(pm8001_ha->irq_vector[i]));
1109 pci_disable_msix(pdev);
1110#else
1111 free_irq(pm8001_ha->irq, sha);
1112#endif
1113#ifdef PM8001_USE_TASKLET
1114 /* For non-msix and msix interrupts */
1115 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1116 (pm8001_ha->chip_id == chip_8001))
1117 tasklet_kill(&pm8001_ha->tasklet[0]);
1118 else
1119 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1120 tasklet_kill(&pm8001_ha->tasklet[j]);
1121#endif
1122 pm8001_free(pm8001_ha);
1123 kfree(sha->sas_phy);
1124 kfree(sha->sas_port);
1125 kfree(sha);
1126 pci_release_regions(pdev);
1127 pci_disable_device(pdev);
1128}
1129
1130/**
1131 * pm8001_pci_suspend - power management suspend main entry point
1132 * @pdev: PCI device struct
1133 * @state: PM state change to (usually PCI_D3)
1134 *
1135 * Returns 0 success, anything else error.
1136 */
1137static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1138{
1139 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1140 struct pm8001_hba_info *pm8001_ha;
1141 int i, j;
1142 u32 device_state;
1143 pm8001_ha = sha->lldd_ha;
1144 sas_suspend_ha(sha);
1145 flush_workqueue(pm8001_wq);
1146 scsi_block_requests(pm8001_ha->shost);
1147 if (!pdev->pm_cap) {
1148 dev_err(&pdev->dev, " PCI PM not supported\n");
1149 return -ENODEV;
1150 }
1151 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1152 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1153#ifdef PM8001_USE_MSIX
1154 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1155 synchronize_irq(pm8001_ha->msix_entries[i].vector);
1156 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1157 free_irq(pm8001_ha->msix_entries[i].vector,
1158 &(pm8001_ha->irq_vector[i]));
1159 pci_disable_msix(pdev);
1160#else
1161 free_irq(pm8001_ha->irq, sha);
1162#endif
1163#ifdef PM8001_USE_TASKLET
1164 /* For non-msix and msix interrupts */
1165 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1166 (pm8001_ha->chip_id == chip_8001))
1167 tasklet_kill(&pm8001_ha->tasklet[0]);
1168 else
1169 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1170 tasklet_kill(&pm8001_ha->tasklet[j]);
1171#endif
1172 device_state = pci_choose_state(pdev, state);
1173 pm8001_printk("pdev=0x%p, slot=%s, entering "
1174 "operating state [D%d]\n", pdev,
1175 pm8001_ha->name, device_state);
1176 pci_save_state(pdev);
1177 pci_disable_device(pdev);
1178 pci_set_power_state(pdev, device_state);
1179 return 0;
1180}
1181
1182/**
1183 * pm8001_pci_resume - power management resume main entry point
1184 * @pdev: PCI device struct
1185 *
1186 * Returns 0 success, anything else error.
1187 */
1188static int pm8001_pci_resume(struct pci_dev *pdev)
1189{
1190 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1191 struct pm8001_hba_info *pm8001_ha;
1192 int rc;
1193 u8 i = 0, j;
1194 u32 device_state;
1195 DECLARE_COMPLETION_ONSTACK(completion);
1196 pm8001_ha = sha->lldd_ha;
1197 device_state = pdev->current_state;
1198
1199 pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
1200 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
1201
1202 pci_set_power_state(pdev, PCI_D0);
1203 pci_enable_wake(pdev, PCI_D0, 0);
1204 pci_restore_state(pdev);
1205 rc = pci_enable_device(pdev);
1206 if (rc) {
1207 pm8001_printk("slot=%s Enable device failed during resume\n",
1208 pm8001_ha->name);
1209 goto err_out_enable;
1210 }
1211
1212 pci_set_master(pdev);
1213 rc = pci_go_44(pdev);
1214 if (rc)
1215 goto err_out_disable;
1216 sas_prep_resume_ha(sha);
1217 /* chip soft rst only for spc */
1218 if (pm8001_ha->chip_id == chip_8001) {
1219 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1220 PM8001_INIT_DBG(pm8001_ha,
1221 pm8001_printk("chip soft reset successful\n"));
1222 }
1223 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1224 if (rc)
1225 goto err_out_disable;
1226
1227 /* disable all the interrupt bits */
1228 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1229
1230 rc = pm8001_request_irq(pm8001_ha);
1231 if (rc)
1232 goto err_out_disable;
1233#ifdef PM8001_USE_TASKLET
1234 /* Tasklet for non msi-x interrupt handler */
1235 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1236 (pm8001_ha->chip_id == chip_8001))
1237 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
1238 (unsigned long)&(pm8001_ha->irq_vector[0]));
1239 else
1240 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1241 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
1242 (unsigned long)&(pm8001_ha->irq_vector[j]));
1243#endif
1244 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1245 if (pm8001_ha->chip_id != chip_8001) {
1246 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1247 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1248 }
1249
1250 /* Chip documentation for the 8070 and 8072 SPCv */
1251 /* states that a 500ms minimum delay is required */
1252 /* before issuing commands. Otherwise, the firmware */
1253 /* will enter an unrecoverable state. */
1254
1255 if (pm8001_ha->chip_id == chip_8070 ||
1256 pm8001_ha->chip_id == chip_8072) {
1257 mdelay(500);
1258 }
1259
1260 /* Spin up the PHYs */
1261
1262 pm8001_ha->flags = PM8001F_RUN_TIME;
1263 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
1264 pm8001_ha->phy[i].enable_completion = &completion;
1265 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
1266 wait_for_completion(&completion);
1267 }
1268 sas_resume_ha(sha);
1269 return 0;
1270
1271err_out_disable:
1272 scsi_remove_host(pm8001_ha->shost);
1273 pci_disable_device(pdev);
1274err_out_enable:
1275 return rc;
1276}
1277
1278/* update of pci device, vendor id and driver data with
1279 * unique value for each of the controller
1280 */
1281static struct pci_device_id pm8001_pci_table[] = {
1282 { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1283 { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
1284 { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
1285 { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
1286 /* Support for SPC/SPCv/SPCve controllers */
1287 { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1288 { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1289 { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1290 { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1291 { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1292 { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1293 { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1294 { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1295 { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1296 { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
1297 { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
1298 { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
1299 { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
1300 { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
1301 { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
1302 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1303 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1304 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1305 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1306 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1307 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1308 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1309 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1310 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1311 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1312 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1313 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1314 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1315 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1316 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1317 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1318 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1319 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1320 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1321 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1322 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1323 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
1324 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1325 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
1326 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1327 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
1328 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1329 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
1330 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1331 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
1332 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1333 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
1334 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1335 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
1336 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1337 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
1338 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1339 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
1340 { PCI_VENDOR_ID_ATTO, 0x8070,
1341 PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
1342 { PCI_VENDOR_ID_ATTO, 0x8070,
1343 PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
1344 { PCI_VENDOR_ID_ATTO, 0x8072,
1345 PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
1346 { PCI_VENDOR_ID_ATTO, 0x8072,
1347 PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
1348 { PCI_VENDOR_ID_ATTO, 0x8070,
1349 PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
1350 { PCI_VENDOR_ID_ATTO, 0x8072,
1351 PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
1352 { PCI_VENDOR_ID_ATTO, 0x8072,
1353 PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
1354 {} /* terminate list */
1355};
1356
1357static struct pci_driver pm8001_pci_driver = {
1358 .name = DRV_NAME,
1359 .id_table = pm8001_pci_table,
1360 .probe = pm8001_pci_probe,
1361 .remove = pm8001_pci_remove,
1362 .suspend = pm8001_pci_suspend,
1363 .resume = pm8001_pci_resume,
1364};
1365
1366/**
1367 * pm8001_init - initialize scsi transport template
1368 */
1369static int __init pm8001_init(void)
1370{
1371 int rc = -ENOMEM;
1372
1373 pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1374 if (!pm8001_wq)
1375 goto err;
1376
1377 pm8001_id = 0;
1378 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1379 if (!pm8001_stt)
1380 goto err_wq;
1381 rc = pci_register_driver(&pm8001_pci_driver);
1382 if (rc)
1383 goto err_tp;
1384 return 0;
1385
1386err_tp:
1387 sas_release_transport(pm8001_stt);
1388err_wq:
1389 destroy_workqueue(pm8001_wq);
1390err:
1391 return rc;
1392}
1393
1394static void __exit pm8001_exit(void)
1395{
1396 pci_unregister_driver(&pm8001_pci_driver);
1397 sas_release_transport(pm8001_stt);
1398 destroy_workqueue(pm8001_wq);
1399}
1400
1401module_init(pm8001_init);
1402module_exit(pm8001_exit);
1403
1404MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
1405MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
1406MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
1407MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
1408MODULE_DESCRIPTION(
1409 "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
1410 "SAS/SATA controller driver");
1411MODULE_VERSION(DRV_VERSION);
1412MODULE_LICENSE("GPL");
1413MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
1414
1/*
2 * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41#include <linux/slab.h>
42#include "pm8001_sas.h"
43#include "pm8001_chips.h"
44
45static struct scsi_transport_template *pm8001_stt;
46
47static const struct pm8001_chip_info pm8001_chips[] = {
48 [chip_8001] = { 8, &pm8001_8001_dispatch,},
49};
50static int pm8001_id;
51
52LIST_HEAD(hba_list);
53
54struct workqueue_struct *pm8001_wq;
55
56/**
57 * The main structure which LLDD must register for scsi core.
58 */
59static struct scsi_host_template pm8001_sht = {
60 .module = THIS_MODULE,
61 .name = DRV_NAME,
62 .queuecommand = sas_queuecommand,
63 .target_alloc = sas_target_alloc,
64 .slave_configure = pm8001_slave_configure,
65 .slave_destroy = sas_slave_destroy,
66 .scan_finished = pm8001_scan_finished,
67 .scan_start = pm8001_scan_start,
68 .change_queue_depth = sas_change_queue_depth,
69 .change_queue_type = sas_change_queue_type,
70 .bios_param = sas_bios_param,
71 .can_queue = 1,
72 .cmd_per_lun = 1,
73 .this_id = -1,
74 .sg_tablesize = SG_ALL,
75 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
76 .use_clustering = ENABLE_CLUSTERING,
77 .eh_device_reset_handler = sas_eh_device_reset_handler,
78 .eh_bus_reset_handler = sas_eh_bus_reset_handler,
79 .slave_alloc = pm8001_slave_alloc,
80 .target_destroy = sas_target_destroy,
81 .ioctl = sas_ioctl,
82 .shost_attrs = pm8001_host_attrs,
83};
84
85/**
86 * Sas layer call this function to execute specific task.
87 */
88static struct sas_domain_function_template pm8001_transport_ops = {
89 .lldd_dev_found = pm8001_dev_found,
90 .lldd_dev_gone = pm8001_dev_gone,
91
92 .lldd_execute_task = pm8001_queue_command,
93 .lldd_control_phy = pm8001_phy_control,
94
95 .lldd_abort_task = pm8001_abort_task,
96 .lldd_abort_task_set = pm8001_abort_task_set,
97 .lldd_clear_aca = pm8001_clear_aca,
98 .lldd_clear_task_set = pm8001_clear_task_set,
99 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
100 .lldd_lu_reset = pm8001_lu_reset,
101 .lldd_query_task = pm8001_query_task,
102};
103
104/**
105 *pm8001_phy_init - initiate our adapter phys
106 *@pm8001_ha: our hba structure.
107 *@phy_id: phy id.
108 */
109static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
110 int phy_id)
111{
112 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
113 struct asd_sas_phy *sas_phy = &phy->sas_phy;
114 phy->phy_state = 0;
115 phy->pm8001_ha = pm8001_ha;
116 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
117 sas_phy->class = SAS;
118 sas_phy->iproto = SAS_PROTOCOL_ALL;
119 sas_phy->tproto = 0;
120 sas_phy->type = PHY_TYPE_PHYSICAL;
121 sas_phy->role = PHY_ROLE_INITIATOR;
122 sas_phy->oob_mode = OOB_NOT_CONNECTED;
123 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
124 sas_phy->id = phy_id;
125 sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
126 sas_phy->frame_rcvd = &phy->frame_rcvd[0];
127 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
128 sas_phy->lldd_phy = phy;
129}
130
131/**
132 *pm8001_free - free hba
133 *@pm8001_ha: our hba structure.
134 *
135 */
136static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
137{
138 int i;
139
140 if (!pm8001_ha)
141 return;
142
143 for (i = 0; i < USI_MAX_MEMCNT; i++) {
144 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
145 pci_free_consistent(pm8001_ha->pdev,
146 pm8001_ha->memoryMap.region[i].element_size,
147 pm8001_ha->memoryMap.region[i].virt_ptr,
148 pm8001_ha->memoryMap.region[i].phys_addr);
149 }
150 }
151 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
152 if (pm8001_ha->shost)
153 scsi_host_put(pm8001_ha->shost);
154 flush_workqueue(pm8001_wq);
155 kfree(pm8001_ha->tags);
156 kfree(pm8001_ha);
157}
158
159#ifdef PM8001_USE_TASKLET
160static void pm8001_tasklet(unsigned long opaque)
161{
162 struct pm8001_hba_info *pm8001_ha;
163 pm8001_ha = (struct pm8001_hba_info *)opaque;
164 if (unlikely(!pm8001_ha))
165 BUG_ON(1);
166 PM8001_CHIP_DISP->isr(pm8001_ha);
167}
168#endif
169
170
171 /**
172 * pm8001_interrupt - when HBA originate a interrupt,we should invoke this
173 * dispatcher to handle each case.
174 * @irq: irq number.
175 * @opaque: the passed general host adapter struct
176 */
177static irqreturn_t pm8001_interrupt(int irq, void *opaque)
178{
179 struct pm8001_hba_info *pm8001_ha;
180 irqreturn_t ret = IRQ_HANDLED;
181 struct sas_ha_struct *sha = opaque;
182 pm8001_ha = sha->lldd_ha;
183 if (unlikely(!pm8001_ha))
184 return IRQ_NONE;
185 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
186 return IRQ_NONE;
187#ifdef PM8001_USE_TASKLET
188 tasklet_schedule(&pm8001_ha->tasklet);
189#else
190 ret = PM8001_CHIP_DISP->isr(pm8001_ha);
191#endif
192 return ret;
193}
194
195/**
196 * pm8001_alloc - initiate our hba structure and 6 DMAs area.
197 * @pm8001_ha:our hba structure.
198 *
199 */
200static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
201{
202 int i;
203 spin_lock_init(&pm8001_ha->lock);
204 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
205 pm8001_phy_init(pm8001_ha, i);
206 pm8001_ha->port[i].wide_port_phymap = 0;
207 pm8001_ha->port[i].port_attached = 0;
208 pm8001_ha->port[i].port_state = 0;
209 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
210 }
211
212 pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
213 if (!pm8001_ha->tags)
214 goto err_out;
215 /* MPI Memory region 1 for AAP Event Log for fw */
216 pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
217 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
218 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
219 pm8001_ha->memoryMap.region[AAP1].alignment = 32;
220
221 /* MPI Memory region 2 for IOP Event Log for fw */
222 pm8001_ha->memoryMap.region[IOP].num_elements = 1;
223 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
224 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
225 pm8001_ha->memoryMap.region[IOP].alignment = 32;
226
227 /* MPI Memory region 3 for consumer Index of inbound queues */
228 pm8001_ha->memoryMap.region[CI].num_elements = 1;
229 pm8001_ha->memoryMap.region[CI].element_size = 4;
230 pm8001_ha->memoryMap.region[CI].total_len = 4;
231 pm8001_ha->memoryMap.region[CI].alignment = 4;
232
233 /* MPI Memory region 4 for producer Index of outbound queues */
234 pm8001_ha->memoryMap.region[PI].num_elements = 1;
235 pm8001_ha->memoryMap.region[PI].element_size = 4;
236 pm8001_ha->memoryMap.region[PI].total_len = 4;
237 pm8001_ha->memoryMap.region[PI].alignment = 4;
238
239 /* MPI Memory region 5 inbound queues */
240 pm8001_ha->memoryMap.region[IB].num_elements = 256;
241 pm8001_ha->memoryMap.region[IB].element_size = 64;
242 pm8001_ha->memoryMap.region[IB].total_len = 256 * 64;
243 pm8001_ha->memoryMap.region[IB].alignment = 64;
244
245 /* MPI Memory region 6 inbound queues */
246 pm8001_ha->memoryMap.region[OB].num_elements = 256;
247 pm8001_ha->memoryMap.region[OB].element_size = 64;
248 pm8001_ha->memoryMap.region[OB].total_len = 256 * 64;
249 pm8001_ha->memoryMap.region[OB].alignment = 64;
250
251 /* Memory region write DMA*/
252 pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
253 pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
254 pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
255 /* Memory region for devices*/
256 pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
257 pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
258 sizeof(struct pm8001_device);
259 pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
260 sizeof(struct pm8001_device);
261
262 /* Memory region for ccb_info*/
263 pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
264 pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
265 sizeof(struct pm8001_ccb_info);
266 pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
267 sizeof(struct pm8001_ccb_info);
268
269 for (i = 0; i < USI_MAX_MEMCNT; i++) {
270 if (pm8001_mem_alloc(pm8001_ha->pdev,
271 &pm8001_ha->memoryMap.region[i].virt_ptr,
272 &pm8001_ha->memoryMap.region[i].phys_addr,
273 &pm8001_ha->memoryMap.region[i].phys_addr_hi,
274 &pm8001_ha->memoryMap.region[i].phys_addr_lo,
275 pm8001_ha->memoryMap.region[i].total_len,
276 pm8001_ha->memoryMap.region[i].alignment) != 0) {
277 PM8001_FAIL_DBG(pm8001_ha,
278 pm8001_printk("Mem%d alloc failed\n",
279 i));
280 goto err_out;
281 }
282 }
283
284 pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
285 for (i = 0; i < PM8001_MAX_DEVICES; i++) {
286 pm8001_ha->devices[i].dev_type = NO_DEVICE;
287 pm8001_ha->devices[i].id = i;
288 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
289 pm8001_ha->devices[i].running_req = 0;
290 }
291 pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
292 for (i = 0; i < PM8001_MAX_CCB; i++) {
293 pm8001_ha->ccb_info[i].ccb_dma_handle =
294 pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
295 i * sizeof(struct pm8001_ccb_info);
296 pm8001_ha->ccb_info[i].task = NULL;
297 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
298 pm8001_ha->ccb_info[i].device = NULL;
299 ++pm8001_ha->tags_num;
300 }
301 pm8001_ha->flags = PM8001F_INIT_TIME;
302 /* Initialize tags */
303 pm8001_tag_init(pm8001_ha);
304 return 0;
305err_out:
306 return 1;
307}
308
309/**
310 * pm8001_ioremap - remap the pci high physical address to kernal virtual
311 * address so that we can access them.
312 * @pm8001_ha:our hba structure.
313 */
314static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
315{
316 u32 bar;
317 u32 logicalBar = 0;
318 struct pci_dev *pdev;
319
320 pdev = pm8001_ha->pdev;
321 /* map pci mem (PMC pci base 0-3)*/
322 for (bar = 0; bar < 6; bar++) {
323 /*
324 ** logical BARs for SPC:
325 ** bar 0 and 1 - logical BAR0
326 ** bar 2 and 3 - logical BAR1
327 ** bar4 - logical BAR2
328 ** bar5 - logical BAR3
329 ** Skip the appropriate assignments:
330 */
331 if ((bar == 1) || (bar == 3))
332 continue;
333 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
334 pm8001_ha->io_mem[logicalBar].membase =
335 pci_resource_start(pdev, bar);
336 pm8001_ha->io_mem[logicalBar].membase &=
337 (u32)PCI_BASE_ADDRESS_MEM_MASK;
338 pm8001_ha->io_mem[logicalBar].memsize =
339 pci_resource_len(pdev, bar);
340 pm8001_ha->io_mem[logicalBar].memvirtaddr =
341 ioremap(pm8001_ha->io_mem[logicalBar].membase,
342 pm8001_ha->io_mem[logicalBar].memsize);
343 PM8001_INIT_DBG(pm8001_ha,
344 pm8001_printk("PCI: bar %d, logicalBar %d "
345 "virt_addr=%lx,len=%d\n", bar, logicalBar,
346 (unsigned long)
347 pm8001_ha->io_mem[logicalBar].memvirtaddr,
348 pm8001_ha->io_mem[logicalBar].memsize));
349 } else {
350 pm8001_ha->io_mem[logicalBar].membase = 0;
351 pm8001_ha->io_mem[logicalBar].memsize = 0;
352 pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
353 }
354 logicalBar++;
355 }
356 return 0;
357}
358
359/**
360 * pm8001_pci_alloc - initialize our ha card structure
361 * @pdev: pci device.
362 * @ent: ent
363 * @shost: scsi host struct which has been initialized before.
364 */
365static struct pm8001_hba_info *__devinit
366pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
367{
368 struct pm8001_hba_info *pm8001_ha;
369 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
370
371
372 pm8001_ha = sha->lldd_ha;
373 if (!pm8001_ha)
374 return NULL;
375
376 pm8001_ha->pdev = pdev;
377 pm8001_ha->dev = &pdev->dev;
378 pm8001_ha->chip_id = chip_id;
379 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
380 pm8001_ha->irq = pdev->irq;
381 pm8001_ha->sas = sha;
382 pm8001_ha->shost = shost;
383 pm8001_ha->id = pm8001_id++;
384 pm8001_ha->logging_level = 0x01;
385 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
386#ifdef PM8001_USE_TASKLET
387 tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
388 (unsigned long)pm8001_ha);
389#endif
390 pm8001_ioremap(pm8001_ha);
391 if (!pm8001_alloc(pm8001_ha))
392 return pm8001_ha;
393 pm8001_free(pm8001_ha);
394 return NULL;
395}
396
397/**
398 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
399 * @pdev: pci device.
400 */
401static int pci_go_44(struct pci_dev *pdev)
402{
403 int rc;
404
405 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
406 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
407 if (rc) {
408 rc = pci_set_consistent_dma_mask(pdev,
409 DMA_BIT_MASK(32));
410 if (rc) {
411 dev_printk(KERN_ERR, &pdev->dev,
412 "44-bit DMA enable failed\n");
413 return rc;
414 }
415 }
416 } else {
417 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
418 if (rc) {
419 dev_printk(KERN_ERR, &pdev->dev,
420 "32-bit DMA enable failed\n");
421 return rc;
422 }
423 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
424 if (rc) {
425 dev_printk(KERN_ERR, &pdev->dev,
426 "32-bit consistent DMA enable failed\n");
427 return rc;
428 }
429 }
430 return rc;
431}
432
433/**
434 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
435 * @shost: scsi host which has been allocated outside.
436 * @chip_info: our ha struct.
437 */
438static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
439 const struct pm8001_chip_info *chip_info)
440{
441 int phy_nr, port_nr;
442 struct asd_sas_phy **arr_phy;
443 struct asd_sas_port **arr_port;
444 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
445
446 phy_nr = chip_info->n_phy;
447 port_nr = phy_nr;
448 memset(sha, 0x00, sizeof(*sha));
449 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
450 if (!arr_phy)
451 goto exit;
452 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
453 if (!arr_port)
454 goto exit_free2;
455
456 sha->sas_phy = arr_phy;
457 sha->sas_port = arr_port;
458 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
459 if (!sha->lldd_ha)
460 goto exit_free1;
461
462 shost->transportt = pm8001_stt;
463 shost->max_id = PM8001_MAX_DEVICES;
464 shost->max_lun = 8;
465 shost->max_channel = 0;
466 shost->unique_id = pm8001_id;
467 shost->max_cmd_len = 16;
468 shost->can_queue = PM8001_CAN_QUEUE;
469 shost->cmd_per_lun = 32;
470 return 0;
471exit_free1:
472 kfree(arr_port);
473exit_free2:
474 kfree(arr_phy);
475exit:
476 return -1;
477}
478
479/**
480 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
481 * @shost: scsi host which has been allocated outside
482 * @chip_info: our ha struct.
483 */
484static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
485 const struct pm8001_chip_info *chip_info)
486{
487 int i = 0;
488 struct pm8001_hba_info *pm8001_ha;
489 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
490
491 pm8001_ha = sha->lldd_ha;
492 for (i = 0; i < chip_info->n_phy; i++) {
493 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
494 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
495 }
496 sha->sas_ha_name = DRV_NAME;
497 sha->dev = pm8001_ha->dev;
498
499 sha->lldd_module = THIS_MODULE;
500 sha->sas_addr = &pm8001_ha->sas_addr[0];
501 sha->num_phys = chip_info->n_phy;
502 sha->lldd_max_execute_num = 1;
503 sha->lldd_queue_size = PM8001_CAN_QUEUE;
504 sha->core.shost = shost;
505}
506
507/**
508 * pm8001_init_sas_add - initialize sas address
509 * @chip_info: our ha struct.
510 *
511 * Currently we just set the fixed SAS address to our HBA,for manufacture,
512 * it should read from the EEPROM
513 */
514static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
515{
516 u8 i;
517#ifdef PM8001_READ_VPD
518 DECLARE_COMPLETION_ONSTACK(completion);
519 struct pm8001_ioctl_payload payload;
520 pm8001_ha->nvmd_completion = &completion;
521 payload.minor_function = 0;
522 payload.length = 128;
523 payload.func_specific = kzalloc(128, GFP_KERNEL);
524 PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
525 wait_for_completion(&completion);
526 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
527 memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
528 SAS_ADDR_SIZE);
529 PM8001_INIT_DBG(pm8001_ha,
530 pm8001_printk("phy %d sas_addr = %016llx \n", i,
531 pm8001_ha->phy[i].dev_sas_addr));
532 }
533#else
534 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
535 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
536 pm8001_ha->phy[i].dev_sas_addr =
537 cpu_to_be64((u64)
538 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
539 }
540 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
541 SAS_ADDR_SIZE);
542#endif
543}
544
545#ifdef PM8001_USE_MSIX
546/**
547 * pm8001_setup_msix - enable MSI-X interrupt
548 * @chip_info: our ha struct.
549 * @irq_handler: irq_handler
550 */
551static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha,
552 irq_handler_t irq_handler)
553{
554 u32 i = 0, j = 0;
555 u32 number_of_intr = 1;
556 int flag = 0;
557 u32 max_entry;
558 int rc;
559 max_entry = sizeof(pm8001_ha->msix_entries) /
560 sizeof(pm8001_ha->msix_entries[0]);
561 flag |= IRQF_DISABLED;
562 for (i = 0; i < max_entry ; i++)
563 pm8001_ha->msix_entries[i].entry = i;
564 rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
565 number_of_intr);
566 pm8001_ha->number_of_intr = number_of_intr;
567 if (!rc) {
568 for (i = 0; i < number_of_intr; i++) {
569 if (request_irq(pm8001_ha->msix_entries[i].vector,
570 irq_handler, flag, DRV_NAME,
571 SHOST_TO_SAS_HA(pm8001_ha->shost))) {
572 for (j = 0; j < i; j++)
573 free_irq(
574 pm8001_ha->msix_entries[j].vector,
575 SHOST_TO_SAS_HA(pm8001_ha->shost));
576 pci_disable_msix(pm8001_ha->pdev);
577 break;
578 }
579 }
580 }
581 return rc;
582}
583#endif
584
585/**
586 * pm8001_request_irq - register interrupt
587 * @chip_info: our ha struct.
588 */
589static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
590{
591 struct pci_dev *pdev;
592 irq_handler_t irq_handler = pm8001_interrupt;
593 int rc;
594
595 pdev = pm8001_ha->pdev;
596
597#ifdef PM8001_USE_MSIX
598 if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
599 return pm8001_setup_msix(pm8001_ha, irq_handler);
600 else
601 goto intx;
602#endif
603
604intx:
605 /* initialize the INT-X interrupt */
606 rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
607 SHOST_TO_SAS_HA(pm8001_ha->shost));
608 return rc;
609}
610
611/**
612 * pm8001_pci_probe - probe supported device
613 * @pdev: pci device which kernel has been prepared for.
614 * @ent: pci device id
615 *
616 * This function is the main initialization function, when register a new
617 * pci driver it is invoked, all struct an hardware initilization should be done
618 * here, also, register interrupt
619 */
620static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
621 const struct pci_device_id *ent)
622{
623 unsigned int rc;
624 u32 pci_reg;
625 struct pm8001_hba_info *pm8001_ha;
626 struct Scsi_Host *shost = NULL;
627 const struct pm8001_chip_info *chip;
628
629 dev_printk(KERN_INFO, &pdev->dev,
630 "pm8001: driver version %s\n", DRV_VERSION);
631 rc = pci_enable_device(pdev);
632 if (rc)
633 goto err_out_enable;
634 pci_set_master(pdev);
635 /*
636 * Enable pci slot busmaster by setting pci command register.
637 * This is required by FW for Cyclone card.
638 */
639
640 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
641 pci_reg |= 0x157;
642 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
643 rc = pci_request_regions(pdev, DRV_NAME);
644 if (rc)
645 goto err_out_disable;
646 rc = pci_go_44(pdev);
647 if (rc)
648 goto err_out_regions;
649
650 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
651 if (!shost) {
652 rc = -ENOMEM;
653 goto err_out_regions;
654 }
655 chip = &pm8001_chips[ent->driver_data];
656 SHOST_TO_SAS_HA(shost) =
657 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
658 if (!SHOST_TO_SAS_HA(shost)) {
659 rc = -ENOMEM;
660 goto err_out_free_host;
661 }
662
663 rc = pm8001_prep_sas_ha_init(shost, chip);
664 if (rc) {
665 rc = -ENOMEM;
666 goto err_out_free;
667 }
668 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
669 pm8001_ha = pm8001_pci_alloc(pdev, chip_8001, shost);
670 if (!pm8001_ha) {
671 rc = -ENOMEM;
672 goto err_out_free;
673 }
674 list_add_tail(&pm8001_ha->list, &hba_list);
675 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
676 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
677 if (rc)
678 goto err_out_ha_free;
679
680 rc = scsi_add_host(shost, &pdev->dev);
681 if (rc)
682 goto err_out_ha_free;
683 rc = pm8001_request_irq(pm8001_ha);
684 if (rc)
685 goto err_out_shost;
686
687 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
688 pm8001_init_sas_add(pm8001_ha);
689 pm8001_post_sas_ha_init(shost, chip);
690 rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
691 if (rc)
692 goto err_out_shost;
693 scsi_scan_host(pm8001_ha->shost);
694 return 0;
695
696err_out_shost:
697 scsi_remove_host(pm8001_ha->shost);
698err_out_ha_free:
699 pm8001_free(pm8001_ha);
700err_out_free:
701 kfree(SHOST_TO_SAS_HA(shost));
702err_out_free_host:
703 kfree(shost);
704err_out_regions:
705 pci_release_regions(pdev);
706err_out_disable:
707 pci_disable_device(pdev);
708err_out_enable:
709 return rc;
710}
711
712static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
713{
714 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
715 struct pm8001_hba_info *pm8001_ha;
716 int i;
717 pm8001_ha = sha->lldd_ha;
718 pci_set_drvdata(pdev, NULL);
719 sas_unregister_ha(sha);
720 sas_remove_host(pm8001_ha->shost);
721 list_del(&pm8001_ha->list);
722 scsi_remove_host(pm8001_ha->shost);
723 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
724 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
725
726#ifdef PM8001_USE_MSIX
727 for (i = 0; i < pm8001_ha->number_of_intr; i++)
728 synchronize_irq(pm8001_ha->msix_entries[i].vector);
729 for (i = 0; i < pm8001_ha->number_of_intr; i++)
730 free_irq(pm8001_ha->msix_entries[i].vector, sha);
731 pci_disable_msix(pdev);
732#else
733 free_irq(pm8001_ha->irq, sha);
734#endif
735#ifdef PM8001_USE_TASKLET
736 tasklet_kill(&pm8001_ha->tasklet);
737#endif
738 pm8001_free(pm8001_ha);
739 kfree(sha->sas_phy);
740 kfree(sha->sas_port);
741 kfree(sha);
742 pci_release_regions(pdev);
743 pci_disable_device(pdev);
744}
745
746/**
747 * pm8001_pci_suspend - power management suspend main entry point
748 * @pdev: PCI device struct
749 * @state: PM state change to (usually PCI_D3)
750 *
751 * Returns 0 success, anything else error.
752 */
753static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
754{
755 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
756 struct pm8001_hba_info *pm8001_ha;
757 int i , pos;
758 u32 device_state;
759 pm8001_ha = sha->lldd_ha;
760 flush_workqueue(pm8001_wq);
761 scsi_block_requests(pm8001_ha->shost);
762 pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
763 if (pos == 0) {
764 printk(KERN_ERR " PCI PM not supported\n");
765 return -ENODEV;
766 }
767 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
768 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
769#ifdef PM8001_USE_MSIX
770 for (i = 0; i < pm8001_ha->number_of_intr; i++)
771 synchronize_irq(pm8001_ha->msix_entries[i].vector);
772 for (i = 0; i < pm8001_ha->number_of_intr; i++)
773 free_irq(pm8001_ha->msix_entries[i].vector, sha);
774 pci_disable_msix(pdev);
775#else
776 free_irq(pm8001_ha->irq, sha);
777#endif
778#ifdef PM8001_USE_TASKLET
779 tasklet_kill(&pm8001_ha->tasklet);
780#endif
781 device_state = pci_choose_state(pdev, state);
782 pm8001_printk("pdev=0x%p, slot=%s, entering "
783 "operating state [D%d]\n", pdev,
784 pm8001_ha->name, device_state);
785 pci_save_state(pdev);
786 pci_disable_device(pdev);
787 pci_set_power_state(pdev, device_state);
788 return 0;
789}
790
791/**
792 * pm8001_pci_resume - power management resume main entry point
793 * @pdev: PCI device struct
794 *
795 * Returns 0 success, anything else error.
796 */
797static int pm8001_pci_resume(struct pci_dev *pdev)
798{
799 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
800 struct pm8001_hba_info *pm8001_ha;
801 int rc;
802 u32 device_state;
803 pm8001_ha = sha->lldd_ha;
804 device_state = pdev->current_state;
805
806 pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
807 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
808
809 pci_set_power_state(pdev, PCI_D0);
810 pci_enable_wake(pdev, PCI_D0, 0);
811 pci_restore_state(pdev);
812 rc = pci_enable_device(pdev);
813 if (rc) {
814 pm8001_printk("slot=%s Enable device failed during resume\n",
815 pm8001_ha->name);
816 goto err_out_enable;
817 }
818
819 pci_set_master(pdev);
820 rc = pci_go_44(pdev);
821 if (rc)
822 goto err_out_disable;
823
824 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
825 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
826 if (rc)
827 goto err_out_disable;
828 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
829 rc = pm8001_request_irq(pm8001_ha);
830 if (rc)
831 goto err_out_disable;
832 #ifdef PM8001_USE_TASKLET
833 tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
834 (unsigned long)pm8001_ha);
835 #endif
836 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
837 scsi_unblock_requests(pm8001_ha->shost);
838 return 0;
839
840err_out_disable:
841 scsi_remove_host(pm8001_ha->shost);
842 pci_disable_device(pdev);
843err_out_enable:
844 return rc;
845}
846
847static struct pci_device_id __devinitdata pm8001_pci_table[] = {
848 {
849 PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
850 },
851 {
852 PCI_DEVICE(0x117c, 0x0042),
853 .driver_data = chip_8001
854 },
855 {} /* terminate list */
856};
857
858static struct pci_driver pm8001_pci_driver = {
859 .name = DRV_NAME,
860 .id_table = pm8001_pci_table,
861 .probe = pm8001_pci_probe,
862 .remove = __devexit_p(pm8001_pci_remove),
863 .suspend = pm8001_pci_suspend,
864 .resume = pm8001_pci_resume,
865};
866
867/**
868 * pm8001_init - initialize scsi transport template
869 */
870static int __init pm8001_init(void)
871{
872 int rc = -ENOMEM;
873
874 pm8001_wq = alloc_workqueue("pm8001", 0, 0);
875 if (!pm8001_wq)
876 goto err;
877
878 pm8001_id = 0;
879 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
880 if (!pm8001_stt)
881 goto err_wq;
882 rc = pci_register_driver(&pm8001_pci_driver);
883 if (rc)
884 goto err_tp;
885 return 0;
886
887err_tp:
888 sas_release_transport(pm8001_stt);
889err_wq:
890 destroy_workqueue(pm8001_wq);
891err:
892 return rc;
893}
894
895static void __exit pm8001_exit(void)
896{
897 pci_unregister_driver(&pm8001_pci_driver);
898 sas_release_transport(pm8001_stt);
899 destroy_workqueue(pm8001_wq);
900}
901
902module_init(pm8001_init);
903module_exit(pm8001_exit);
904
905MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
906MODULE_DESCRIPTION("PMC-Sierra PM8001 SAS/SATA controller driver");
907MODULE_VERSION(DRV_VERSION);
908MODULE_LICENSE("GPL");
909MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
910