Loading...
1/* Various workarounds for chipset bugs.
2 This code runs very early and can't use the regular PCI subsystem
3 The entries are keyed to PCI bridges which usually identify chipsets
4 uniquely.
5 This is only for whole classes of chipsets with specific problems which
6 need early invasive action (e.g. before the timers are initialized).
7 Most PCI device specific workarounds can be done later and should be
8 in standard PCI quirks
9 Mainboard specific bugs should be handled by DMI entries.
10 CPU specific bugs in setup.c */
11
12#include <linux/pci.h>
13#include <linux/acpi.h>
14#include <linux/pci_ids.h>
15#include <asm/pci-direct.h>
16#include <asm/dma.h>
17#include <asm/io_apic.h>
18#include <asm/apic.h>
19#include <asm/iommu.h>
20#include <asm/gart.h>
21
22static void __init fix_hypertransport_config(int num, int slot, int func)
23{
24 u32 htcfg;
25 /*
26 * we found a hypertransport bus
27 * make sure that we are broadcasting
28 * interrupts to all cpus on the ht bus
29 * if we're using extended apic ids
30 */
31 htcfg = read_pci_config(num, slot, func, 0x68);
32 if (htcfg & (1 << 18)) {
33 printk(KERN_INFO "Detected use of extended apic ids "
34 "on hypertransport bus\n");
35 if ((htcfg & (1 << 17)) == 0) {
36 printk(KERN_INFO "Enabling hypertransport extended "
37 "apic interrupt broadcast\n");
38 printk(KERN_INFO "Note this is a bios bug, "
39 "please contact your hw vendor\n");
40 htcfg |= (1 << 17);
41 write_pci_config(num, slot, func, 0x68, htcfg);
42 }
43 }
44
45
46}
47
48static void __init via_bugs(int num, int slot, int func)
49{
50#ifdef CONFIG_GART_IOMMU
51 if ((max_pfn > MAX_DMA32_PFN || force_iommu) &&
52 !gart_iommu_aperture_allowed) {
53 printk(KERN_INFO
54 "Looks like a VIA chipset. Disabling IOMMU."
55 " Override with iommu=allowed\n");
56 gart_iommu_aperture_disabled = 1;
57 }
58#endif
59}
60
61#ifdef CONFIG_ACPI
62#ifdef CONFIG_X86_IO_APIC
63
64static int __init nvidia_hpet_check(struct acpi_table_header *header)
65{
66 return 0;
67}
68#endif /* CONFIG_X86_IO_APIC */
69#endif /* CONFIG_ACPI */
70
71static void __init nvidia_bugs(int num, int slot, int func)
72{
73#ifdef CONFIG_ACPI
74#ifdef CONFIG_X86_IO_APIC
75 /*
76 * All timer overrides on Nvidia are
77 * wrong unless HPET is enabled.
78 * Unfortunately that's not true on many Asus boards.
79 * We don't know yet how to detect this automatically, but
80 * at least allow a command line override.
81 */
82 if (acpi_use_timer_override)
83 return;
84
85 if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
86 acpi_skip_timer_override = 1;
87 printk(KERN_INFO "Nvidia board "
88 "detected. Ignoring ACPI "
89 "timer override.\n");
90 printk(KERN_INFO "If you got timer trouble "
91 "try acpi_use_timer_override\n");
92 }
93#endif
94#endif
95 /* RED-PEN skip them on mptables too? */
96
97}
98
99#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
100static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
101{
102 u32 d;
103 u8 b;
104
105 b = read_pci_config_byte(num, slot, func, 0xac);
106 b &= ~(1<<5);
107 write_pci_config_byte(num, slot, func, 0xac, b);
108
109 d = read_pci_config(num, slot, func, 0x70);
110 d |= 1<<8;
111 write_pci_config(num, slot, func, 0x70, d);
112
113 d = read_pci_config(num, slot, func, 0x8);
114 d &= 0xff;
115 return d;
116}
117
118static void __init ati_bugs(int num, int slot, int func)
119{
120 u32 d;
121 u8 b;
122
123 if (acpi_use_timer_override)
124 return;
125
126 d = ati_ixp4x0_rev(num, slot, func);
127 if (d < 0x82)
128 acpi_skip_timer_override = 1;
129 else {
130 /* check for IRQ0 interrupt swap */
131 outb(0x72, 0xcd6); b = inb(0xcd7);
132 if (!(b & 0x2))
133 acpi_skip_timer_override = 1;
134 }
135
136 if (acpi_skip_timer_override) {
137 printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
138 printk(KERN_INFO "Ignoring ACPI timer override.\n");
139 printk(KERN_INFO "If you got timer trouble "
140 "try acpi_use_timer_override\n");
141 }
142}
143
144static u32 __init ati_sbx00_rev(int num, int slot, int func)
145{
146 u32 d;
147
148 d = read_pci_config(num, slot, func, 0x8);
149 d &= 0xff;
150
151 return d;
152}
153
154static void __init ati_bugs_contd(int num, int slot, int func)
155{
156 u32 d, rev;
157
158 rev = ati_sbx00_rev(num, slot, func);
159 if (rev >= 0x40)
160 acpi_fix_pin2_polarity = 1;
161
162 /*
163 * SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
164 * SB700: revisions 0x39, 0x3a, ...
165 * SB800: revisions 0x40, 0x41, ...
166 */
167 if (rev >= 0x39)
168 return;
169
170 if (acpi_use_timer_override)
171 return;
172
173 /* check for IRQ0 interrupt swap */
174 d = read_pci_config(num, slot, func, 0x64);
175 if (!(d & (1<<14)))
176 acpi_skip_timer_override = 1;
177
178 if (acpi_skip_timer_override) {
179 printk(KERN_INFO "SB600 revision 0x%x\n", rev);
180 printk(KERN_INFO "Ignoring ACPI timer override.\n");
181 printk(KERN_INFO "If you got timer trouble "
182 "try acpi_use_timer_override\n");
183 }
184}
185#else
186static void __init ati_bugs(int num, int slot, int func)
187{
188}
189
190static void __init ati_bugs_contd(int num, int slot, int func)
191{
192}
193#endif
194
195#define QFLAG_APPLY_ONCE 0x1
196#define QFLAG_APPLIED 0x2
197#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
198struct chipset {
199 u32 vendor;
200 u32 device;
201 u32 class;
202 u32 class_mask;
203 u32 flags;
204 void (*f)(int num, int slot, int func);
205};
206
207/*
208 * Only works for devices on the root bus. If you add any devices
209 * not on bus 0 readd another loop level in early_quirks(). But
210 * be careful because at least the Nvidia quirk here relies on
211 * only matching on bus 0.
212 */
213static struct chipset early_qrk[] __initdata = {
214 { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
215 PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
216 { PCI_VENDOR_ID_VIA, PCI_ANY_ID,
217 PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
218 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
219 PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
220 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
221 PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
222 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
223 PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
224 {}
225};
226
227/**
228 * check_dev_quirk - apply early quirks to a given PCI device
229 * @num: bus number
230 * @slot: slot number
231 * @func: PCI function
232 *
233 * Check the vendor & device ID against the early quirks table.
234 *
235 * If the device is single function, let early_quirks() know so we don't
236 * poke at this device again.
237 */
238static int __init check_dev_quirk(int num, int slot, int func)
239{
240 u16 class;
241 u16 vendor;
242 u16 device;
243 u8 type;
244 int i;
245
246 class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
247
248 if (class == 0xffff)
249 return -1; /* no class, treat as single function */
250
251 vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
252
253 device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
254
255 for (i = 0; early_qrk[i].f != NULL; i++) {
256 if (((early_qrk[i].vendor == PCI_ANY_ID) ||
257 (early_qrk[i].vendor == vendor)) &&
258 ((early_qrk[i].device == PCI_ANY_ID) ||
259 (early_qrk[i].device == device)) &&
260 (!((early_qrk[i].class ^ class) &
261 early_qrk[i].class_mask))) {
262 if ((early_qrk[i].flags &
263 QFLAG_DONE) != QFLAG_DONE)
264 early_qrk[i].f(num, slot, func);
265 early_qrk[i].flags |= QFLAG_APPLIED;
266 }
267 }
268
269 type = read_pci_config_byte(num, slot, func,
270 PCI_HEADER_TYPE);
271 if (!(type & 0x80))
272 return -1;
273
274 return 0;
275}
276
277void __init early_quirks(void)
278{
279 int slot, func;
280
281 if (!early_pci_allowed())
282 return;
283
284 /* Poor man's PCI discovery */
285 /* Only scan the root bus */
286 for (slot = 0; slot < 32; slot++)
287 for (func = 0; func < 8; func++) {
288 /* Only probe function 0 on single fn devices */
289 if (check_dev_quirk(0, slot, func))
290 break;
291 }
292}
1/* Various workarounds for chipset bugs.
2 This code runs very early and can't use the regular PCI subsystem
3 The entries are keyed to PCI bridges which usually identify chipsets
4 uniquely.
5 This is only for whole classes of chipsets with specific problems which
6 need early invasive action (e.g. before the timers are initialized).
7 Most PCI device specific workarounds can be done later and should be
8 in standard PCI quirks
9 Mainboard specific bugs should be handled by DMI entries.
10 CPU specific bugs in setup.c */
11
12#include <linux/pci.h>
13#include <linux/acpi.h>
14#include <linux/pci_ids.h>
15#include <asm/pci-direct.h>
16#include <asm/dma.h>
17#include <asm/io_apic.h>
18#include <asm/apic.h>
19#include <asm/iommu.h>
20#include <asm/gart.h>
21
22static void __init fix_hypertransport_config(int num, int slot, int func)
23{
24 u32 htcfg;
25 /*
26 * we found a hypertransport bus
27 * make sure that we are broadcasting
28 * interrupts to all cpus on the ht bus
29 * if we're using extended apic ids
30 */
31 htcfg = read_pci_config(num, slot, func, 0x68);
32 if (htcfg & (1 << 18)) {
33 printk(KERN_INFO "Detected use of extended apic ids "
34 "on hypertransport bus\n");
35 if ((htcfg & (1 << 17)) == 0) {
36 printk(KERN_INFO "Enabling hypertransport extended "
37 "apic interrupt broadcast\n");
38 printk(KERN_INFO "Note this is a bios bug, "
39 "please contact your hw vendor\n");
40 htcfg |= (1 << 17);
41 write_pci_config(num, slot, func, 0x68, htcfg);
42 }
43 }
44
45
46}
47
48static void __init via_bugs(int num, int slot, int func)
49{
50#ifdef CONFIG_GART_IOMMU
51 if ((max_pfn > MAX_DMA32_PFN || force_iommu) &&
52 !gart_iommu_aperture_allowed) {
53 printk(KERN_INFO
54 "Looks like a VIA chipset. Disabling IOMMU."
55 " Override with iommu=allowed\n");
56 gart_iommu_aperture_disabled = 1;
57 }
58#endif
59}
60
61#ifdef CONFIG_ACPI
62#ifdef CONFIG_X86_IO_APIC
63
64static int __init nvidia_hpet_check(struct acpi_table_header *header)
65{
66 return 0;
67}
68#endif /* CONFIG_X86_IO_APIC */
69#endif /* CONFIG_ACPI */
70
71static void __init nvidia_bugs(int num, int slot, int func)
72{
73#ifdef CONFIG_ACPI
74#ifdef CONFIG_X86_IO_APIC
75 /*
76 * All timer overrides on Nvidia are
77 * wrong unless HPET is enabled.
78 * Unfortunately that's not true on many Asus boards.
79 * We don't know yet how to detect this automatically, but
80 * at least allow a command line override.
81 */
82 if (acpi_use_timer_override)
83 return;
84
85 if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
86 acpi_skip_timer_override = 1;
87 printk(KERN_INFO "Nvidia board "
88 "detected. Ignoring ACPI "
89 "timer override.\n");
90 printk(KERN_INFO "If you got timer trouble "
91 "try acpi_use_timer_override\n");
92 }
93#endif
94#endif
95 /* RED-PEN skip them on mptables too? */
96
97}
98
99#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
100static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
101{
102 u32 d;
103 u8 b;
104
105 b = read_pci_config_byte(num, slot, func, 0xac);
106 b &= ~(1<<5);
107 write_pci_config_byte(num, slot, func, 0xac, b);
108
109 d = read_pci_config(num, slot, func, 0x70);
110 d |= 1<<8;
111 write_pci_config(num, slot, func, 0x70, d);
112
113 d = read_pci_config(num, slot, func, 0x8);
114 d &= 0xff;
115 return d;
116}
117
118static void __init ati_bugs(int num, int slot, int func)
119{
120 u32 d;
121 u8 b;
122
123 if (acpi_use_timer_override)
124 return;
125
126 d = ati_ixp4x0_rev(num, slot, func);
127 if (d < 0x82)
128 acpi_skip_timer_override = 1;
129 else {
130 /* check for IRQ0 interrupt swap */
131 outb(0x72, 0xcd6); b = inb(0xcd7);
132 if (!(b & 0x2))
133 acpi_skip_timer_override = 1;
134 }
135
136 if (acpi_skip_timer_override) {
137 printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
138 printk(KERN_INFO "Ignoring ACPI timer override.\n");
139 printk(KERN_INFO "If you got timer trouble "
140 "try acpi_use_timer_override\n");
141 }
142}
143
144static u32 __init ati_sbx00_rev(int num, int slot, int func)
145{
146 u32 d;
147
148 d = read_pci_config(num, slot, func, 0x8);
149 d &= 0xff;
150
151 return d;
152}
153
154static void __init ati_bugs_contd(int num, int slot, int func)
155{
156 u32 d, rev;
157
158 rev = ati_sbx00_rev(num, slot, func);
159 if (rev >= 0x40)
160 acpi_fix_pin2_polarity = 1;
161
162 /*
163 * SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
164 * SB700: revisions 0x39, 0x3a, ...
165 * SB800: revisions 0x40, 0x41, ...
166 */
167 if (rev >= 0x39)
168 return;
169
170 if (acpi_use_timer_override)
171 return;
172
173 /* check for IRQ0 interrupt swap */
174 d = read_pci_config(num, slot, func, 0x64);
175 if (!(d & (1<<14)))
176 acpi_skip_timer_override = 1;
177
178 if (acpi_skip_timer_override) {
179 printk(KERN_INFO "SB600 revision 0x%x\n", rev);
180 printk(KERN_INFO "Ignoring ACPI timer override.\n");
181 printk(KERN_INFO "If you got timer trouble "
182 "try acpi_use_timer_override\n");
183 }
184}
185#else
186static void __init ati_bugs(int num, int slot, int func)
187{
188}
189
190static void __init ati_bugs_contd(int num, int slot, int func)
191{
192}
193#endif
194
195#define QFLAG_APPLY_ONCE 0x1
196#define QFLAG_APPLIED 0x2
197#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
198struct chipset {
199 u32 vendor;
200 u32 device;
201 u32 class;
202 u32 class_mask;
203 u32 flags;
204 void (*f)(int num, int slot, int func);
205};
206
207/*
208 * Only works for devices on the root bus. If you add any devices
209 * not on bus 0 readd another loop level in early_quirks(). But
210 * be careful because at least the Nvidia quirk here relies on
211 * only matching on bus 0.
212 */
213static struct chipset early_qrk[] __initdata = {
214 { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
215 PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
216 { PCI_VENDOR_ID_VIA, PCI_ANY_ID,
217 PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
218 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
219 PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
220 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
221 PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
222 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
223 PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
224 {}
225};
226
227/**
228 * check_dev_quirk - apply early quirks to a given PCI device
229 * @num: bus number
230 * @slot: slot number
231 * @func: PCI function
232 *
233 * Check the vendor & device ID against the early quirks table.
234 *
235 * If the device is single function, let early_quirks() know so we don't
236 * poke at this device again.
237 */
238static int __init check_dev_quirk(int num, int slot, int func)
239{
240 u16 class;
241 u16 vendor;
242 u16 device;
243 u8 type;
244 int i;
245
246 class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
247
248 if (class == 0xffff)
249 return -1; /* no class, treat as single function */
250
251 vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
252
253 device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
254
255 for (i = 0; early_qrk[i].f != NULL; i++) {
256 if (((early_qrk[i].vendor == PCI_ANY_ID) ||
257 (early_qrk[i].vendor == vendor)) &&
258 ((early_qrk[i].device == PCI_ANY_ID) ||
259 (early_qrk[i].device == device)) &&
260 (!((early_qrk[i].class ^ class) &
261 early_qrk[i].class_mask))) {
262 if ((early_qrk[i].flags &
263 QFLAG_DONE) != QFLAG_DONE)
264 early_qrk[i].f(num, slot, func);
265 early_qrk[i].flags |= QFLAG_APPLIED;
266 }
267 }
268
269 type = read_pci_config_byte(num, slot, func,
270 PCI_HEADER_TYPE);
271 if (!(type & 0x80))
272 return -1;
273
274 return 0;
275}
276
277void __init early_quirks(void)
278{
279 int slot, func;
280
281 if (!early_pci_allowed())
282 return;
283
284 /* Poor man's PCI discovery */
285 /* Only scan the root bus */
286 for (slot = 0; slot < 32; slot++)
287 for (func = 0; func < 8; func++) {
288 /* Only probe function 0 on single fn devices */
289 if (check_dev_quirk(0, slot, func))
290 break;
291 }
292}