Loading...
1/*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 */
19
20// #define DEBUG // error path messages, extra info
21// #define VERBOSE // more; success messages
22
23#include <linux/module.h>
24#include <linux/netdevice.h>
25#include <linux/etherdevice.h>
26#include <linux/ethtool.h>
27#include <linux/workqueue.h>
28#include <linux/mii.h>
29#include <linux/usb.h>
30#include <linux/usb/cdc.h>
31#include <linux/usb/usbnet.h>
32
33
34#if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
35
36static int is_rndis(struct usb_interface_descriptor *desc)
37{
38 return (desc->bInterfaceClass == USB_CLASS_COMM &&
39 desc->bInterfaceSubClass == 2 &&
40 desc->bInterfaceProtocol == 0xff);
41}
42
43static int is_activesync(struct usb_interface_descriptor *desc)
44{
45 return (desc->bInterfaceClass == USB_CLASS_MISC &&
46 desc->bInterfaceSubClass == 1 &&
47 desc->bInterfaceProtocol == 1);
48}
49
50static int is_wireless_rndis(struct usb_interface_descriptor *desc)
51{
52 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53 desc->bInterfaceSubClass == 1 &&
54 desc->bInterfaceProtocol == 3);
55}
56
57#else
58
59#define is_rndis(desc) 0
60#define is_activesync(desc) 0
61#define is_wireless_rndis(desc) 0
62
63#endif
64
65static const u8 mbm_guid[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
68};
69
70/* probes control interface, claims data interface, collects the bulk
71 * endpoints, activates data interface (if needed), maybe sets MTU.
72 * all pure cdc, except for certain firmware workarounds, and knowing
73 * that rndis uses one different rule.
74 */
75int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
76{
77 u8 *buf = intf->cur_altsetting->extra;
78 int len = intf->cur_altsetting->extralen;
79 struct usb_interface_descriptor *d;
80 struct cdc_state *info = (void *) &dev->data;
81 int status;
82 int rndis;
83 bool android_rndis_quirk = false;
84 struct usb_driver *driver = driver_of(intf);
85 struct usb_cdc_mdlm_desc *desc = NULL;
86 struct usb_cdc_mdlm_detail_desc *detail = NULL;
87
88 if (sizeof(dev->data) < sizeof(*info))
89 return -EDOM;
90
91 /* expect strict spec conformance for the descriptors, but
92 * cope with firmware which stores them in the wrong place
93 */
94 if (len == 0 && dev->udev->actconfig->extralen) {
95 /* Motorola SB4100 (and others: Brad Hards says it's
96 * from a Broadcom design) put CDC descriptors here
97 */
98 buf = dev->udev->actconfig->extra;
99 len = dev->udev->actconfig->extralen;
100 dev_dbg(&intf->dev, "CDC descriptors on config\n");
101 }
102
103 /* Maybe CDC descriptors are after the endpoint? This bug has
104 * been seen on some 2Wire Inc RNDIS-ish products.
105 */
106 if (len == 0) {
107 struct usb_host_endpoint *hep;
108
109 hep = intf->cur_altsetting->endpoint;
110 if (hep) {
111 buf = hep->extra;
112 len = hep->extralen;
113 }
114 if (len)
115 dev_dbg(&intf->dev,
116 "CDC descriptors on endpoint\n");
117 }
118
119 /* this assumes that if there's a non-RNDIS vendor variant
120 * of cdc-acm, it'll fail RNDIS requests cleanly.
121 */
122 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
123 is_activesync(&intf->cur_altsetting->desc) ||
124 is_wireless_rndis(&intf->cur_altsetting->desc));
125
126 memset(info, 0, sizeof(*info));
127 info->control = intf;
128 while (len > 3) {
129 if (buf[1] != USB_DT_CS_INTERFACE)
130 goto next_desc;
131
132 /* use bDescriptorSubType to identify the CDC descriptors.
133 * We expect devices with CDC header and union descriptors.
134 * For CDC Ethernet we need the ethernet descriptor.
135 * For RNDIS, ignore two (pointless) CDC modem descriptors
136 * in favor of a complicated OID-based RPC scheme doing what
137 * CDC Ethernet achieves with a simple descriptor.
138 */
139 switch (buf[2]) {
140 case USB_CDC_HEADER_TYPE:
141 if (info->header) {
142 dev_dbg(&intf->dev, "extra CDC header\n");
143 goto bad_desc;
144 }
145 info->header = (void *) buf;
146 if (info->header->bLength != sizeof(*info->header)) {
147 dev_dbg(&intf->dev, "CDC header len %u\n",
148 info->header->bLength);
149 goto bad_desc;
150 }
151 break;
152 case USB_CDC_ACM_TYPE:
153 /* paranoia: disambiguate a "real" vendor-specific
154 * modem interface from an RNDIS non-modem.
155 */
156 if (rndis) {
157 struct usb_cdc_acm_descriptor *acm;
158
159 acm = (void *) buf;
160 if (acm->bmCapabilities) {
161 dev_dbg(&intf->dev,
162 "ACM capabilities %02x, "
163 "not really RNDIS?\n",
164 acm->bmCapabilities);
165 goto bad_desc;
166 }
167 }
168 break;
169 case USB_CDC_UNION_TYPE:
170 if (info->u) {
171 dev_dbg(&intf->dev, "extra CDC union\n");
172 goto bad_desc;
173 }
174 info->u = (void *) buf;
175 if (info->u->bLength != sizeof(*info->u)) {
176 dev_dbg(&intf->dev, "CDC union len %u\n",
177 info->u->bLength);
178 goto bad_desc;
179 }
180
181 /* we need a master/control interface (what we're
182 * probed with) and a slave/data interface; union
183 * descriptors sort this all out.
184 */
185 info->control = usb_ifnum_to_if(dev->udev,
186 info->u->bMasterInterface0);
187 info->data = usb_ifnum_to_if(dev->udev,
188 info->u->bSlaveInterface0);
189 if (!info->control || !info->data) {
190 dev_dbg(&intf->dev,
191 "master #%u/%p slave #%u/%p\n",
192 info->u->bMasterInterface0,
193 info->control,
194 info->u->bSlaveInterface0,
195 info->data);
196 /* fall back to hard-wiring for RNDIS */
197 if (rndis) {
198 android_rndis_quirk = true;
199 goto next_desc;
200 }
201 goto bad_desc;
202 }
203 if (info->control != intf) {
204 dev_dbg(&intf->dev, "bogus CDC Union\n");
205 /* Ambit USB Cable Modem (and maybe others)
206 * interchanges master and slave interface.
207 */
208 if (info->data == intf) {
209 info->data = info->control;
210 info->control = intf;
211 } else
212 goto bad_desc;
213 }
214
215 /* some devices merge these - skip class check */
216 if (info->control == info->data)
217 goto next_desc;
218
219 /* a data interface altsetting does the real i/o */
220 d = &info->data->cur_altsetting->desc;
221 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
222 dev_dbg(&intf->dev, "slave class %u\n",
223 d->bInterfaceClass);
224 goto bad_desc;
225 }
226 break;
227 case USB_CDC_ETHERNET_TYPE:
228 if (info->ether) {
229 dev_dbg(&intf->dev, "extra CDC ether\n");
230 goto bad_desc;
231 }
232 info->ether = (void *) buf;
233 if (info->ether->bLength != sizeof(*info->ether)) {
234 dev_dbg(&intf->dev, "CDC ether len %u\n",
235 info->ether->bLength);
236 goto bad_desc;
237 }
238 dev->hard_mtu = le16_to_cpu(
239 info->ether->wMaxSegmentSize);
240 /* because of Zaurus, we may be ignoring the host
241 * side link address we were given.
242 */
243 break;
244 case USB_CDC_MDLM_TYPE:
245 if (desc) {
246 dev_dbg(&intf->dev, "extra MDLM descriptor\n");
247 goto bad_desc;
248 }
249
250 desc = (void *)buf;
251
252 if (desc->bLength != sizeof(*desc))
253 goto bad_desc;
254
255 if (memcmp(&desc->bGUID, mbm_guid, 16))
256 goto bad_desc;
257 break;
258 case USB_CDC_MDLM_DETAIL_TYPE:
259 if (detail) {
260 dev_dbg(&intf->dev, "extra MDLM detail descriptor\n");
261 goto bad_desc;
262 }
263
264 detail = (void *)buf;
265
266 if (detail->bGuidDescriptorType == 0) {
267 if (detail->bLength < (sizeof(*detail) + 1))
268 goto bad_desc;
269 } else
270 goto bad_desc;
271 break;
272 }
273next_desc:
274 len -= buf[0]; /* bLength */
275 buf += buf[0];
276 }
277
278 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
279 * CDC descriptors, so we'll hard-wire the interfaces and not check
280 * for descriptors.
281 *
282 * Some Android RNDIS devices have a CDC Union descriptor pointing
283 * to non-existing interfaces. Ignore that and attempt the same
284 * hard-wired 0 and 1 interfaces.
285 */
286 if (rndis && (!info->u || android_rndis_quirk)) {
287 info->control = usb_ifnum_to_if(dev->udev, 0);
288 info->data = usb_ifnum_to_if(dev->udev, 1);
289 if (!info->control || !info->data || info->control != intf) {
290 dev_dbg(&intf->dev,
291 "rndis: master #0/%p slave #1/%p\n",
292 info->control,
293 info->data);
294 goto bad_desc;
295 }
296
297 } else if (!info->header || !info->u || (!rndis && !info->ether)) {
298 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
299 info->header ? "" : "header ",
300 info->u ? "" : "union ",
301 info->ether ? "" : "ether ");
302 goto bad_desc;
303 }
304
305 /* claim data interface and set it up ... with side effects.
306 * network traffic can't flow until an altsetting is enabled.
307 */
308 if (info->data != info->control) {
309 status = usb_driver_claim_interface(driver, info->data, dev);
310 if (status < 0)
311 return status;
312 }
313 status = usbnet_get_endpoints(dev, info->data);
314 if (status < 0) {
315 /* ensure immediate exit from usbnet_disconnect */
316 usb_set_intfdata(info->data, NULL);
317 if (info->data != info->control)
318 usb_driver_release_interface(driver, info->data);
319 return status;
320 }
321
322 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
323 if (info->data != info->control)
324 dev->status = NULL;
325 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
326 struct usb_endpoint_descriptor *desc;
327
328 dev->status = &info->control->cur_altsetting->endpoint [0];
329 desc = &dev->status->desc;
330 if (!usb_endpoint_is_int_in(desc) ||
331 (le16_to_cpu(desc->wMaxPacketSize)
332 < sizeof(struct usb_cdc_notification)) ||
333 !desc->bInterval) {
334 dev_dbg(&intf->dev, "bad notification endpoint\n");
335 dev->status = NULL;
336 }
337 }
338 if (rndis && !dev->status) {
339 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
340 usb_set_intfdata(info->data, NULL);
341 usb_driver_release_interface(driver, info->data);
342 return -ENODEV;
343 }
344 return 0;
345
346bad_desc:
347 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
348 return -ENODEV;
349}
350EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
351
352void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
353{
354 struct cdc_state *info = (void *) &dev->data;
355 struct usb_driver *driver = driver_of(intf);
356
357 /* combined interface - nothing to do */
358 if (info->data == info->control)
359 return;
360
361 /* disconnect master --> disconnect slave */
362 if (intf == info->control && info->data) {
363 /* ensure immediate exit from usbnet_disconnect */
364 usb_set_intfdata(info->data, NULL);
365 usb_driver_release_interface(driver, info->data);
366 info->data = NULL;
367 }
368
369 /* and vice versa (just in case) */
370 else if (intf == info->data && info->control) {
371 /* ensure immediate exit from usbnet_disconnect */
372 usb_set_intfdata(info->control, NULL);
373 usb_driver_release_interface(driver, info->control);
374 info->control = NULL;
375 }
376}
377EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
378
379/* Communications Device Class, Ethernet Control model
380 *
381 * Takes two interfaces. The DATA interface is inactive till an altsetting
382 * is selected. Configuration data includes class descriptors. There's
383 * an optional status endpoint on the control interface.
384 *
385 * This should interop with whatever the 2.4 "CDCEther.c" driver
386 * (by Brad Hards) talked with, with more functionality.
387 */
388
389static void dumpspeed(struct usbnet *dev, __le32 *speeds)
390{
391 netif_info(dev, timer, dev->net,
392 "link speeds: %u kbps up, %u kbps down\n",
393 __le32_to_cpu(speeds[0]) / 1000,
394 __le32_to_cpu(speeds[1]) / 1000);
395}
396
397void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
398{
399 struct usb_cdc_notification *event;
400
401 if (urb->actual_length < sizeof(*event))
402 return;
403
404 /* SPEED_CHANGE can get split into two 8-byte packets */
405 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
406 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
407 return;
408 }
409
410 event = urb->transfer_buffer;
411 switch (event->bNotificationType) {
412 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
413 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
414 event->wValue ? "on" : "off");
415 usbnet_link_change(dev, !!event->wValue, 0);
416 break;
417 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
418 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
419 urb->actual_length);
420 if (urb->actual_length != (sizeof(*event) + 8))
421 set_bit(EVENT_STS_SPLIT, &dev->flags);
422 else
423 dumpspeed(dev, (__le32 *) &event[1]);
424 break;
425 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
426 * but there are no standard formats for the response data.
427 */
428 default:
429 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
430 event->bNotificationType);
431 break;
432 }
433}
434EXPORT_SYMBOL_GPL(usbnet_cdc_status);
435
436int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
437{
438 int status;
439 struct cdc_state *info = (void *) &dev->data;
440
441 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
442 < sizeof(struct cdc_state)));
443
444 status = usbnet_generic_cdc_bind(dev, intf);
445 if (status < 0)
446 return status;
447
448 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
449 if (status < 0) {
450 usb_set_intfdata(info->data, NULL);
451 usb_driver_release_interface(driver_of(intf), info->data);
452 return status;
453 }
454
455 /* FIXME cdc-ether has some multicast code too, though it complains
456 * in routine cases. info->ether describes the multicast support.
457 * Implement that here, manipulating the cdc filter as needed.
458 */
459 return 0;
460}
461EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
462
463static const struct driver_info cdc_info = {
464 .description = "CDC Ethernet Device",
465 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
466 .bind = usbnet_cdc_bind,
467 .unbind = usbnet_cdc_unbind,
468 .status = usbnet_cdc_status,
469 .manage_power = usbnet_manage_power,
470};
471
472static const struct driver_info wwan_info = {
473 .description = "Mobile Broadband Network Device",
474 .flags = FLAG_WWAN,
475 .bind = usbnet_cdc_bind,
476 .unbind = usbnet_cdc_unbind,
477 .status = usbnet_cdc_status,
478 .manage_power = usbnet_manage_power,
479};
480
481/*-------------------------------------------------------------------------*/
482
483#define HUAWEI_VENDOR_ID 0x12D1
484#define NOVATEL_VENDOR_ID 0x1410
485#define ZTE_VENDOR_ID 0x19D2
486#define DELL_VENDOR_ID 0x413C
487#define REALTEK_VENDOR_ID 0x0bda
488#define SAMSUNG_VENDOR_ID 0x04e8
489
490static const struct usb_device_id products[] = {
491/* BLACKLIST !!
492 *
493 * First blacklist any products that are egregiously nonconformant
494 * with the CDC Ethernet specs. Minor braindamage we cope with; when
495 * they're not even trying, needing a separate driver is only the first
496 * of the differences to show up.
497 */
498
499#define ZAURUS_MASTER_INTERFACE \
500 .bInterfaceClass = USB_CLASS_COMM, \
501 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
502 .bInterfaceProtocol = USB_CDC_PROTO_NONE
503
504/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
505 * wire-incompatible with true CDC Ethernet implementations.
506 * (And, it seems, needlessly so...)
507 */
508{
509 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
510 | USB_DEVICE_ID_MATCH_DEVICE,
511 .idVendor = 0x04DD,
512 .idProduct = 0x8004,
513 ZAURUS_MASTER_INTERFACE,
514 .driver_info = 0,
515},
516
517/* PXA-25x based Sharp Zaurii. Note that it seems some of these
518 * (later models especially) may have shipped only with firmware
519 * advertising false "CDC MDLM" compatibility ... but we're not
520 * clear which models did that, so for now let's assume the worst.
521 */
522{
523 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
524 | USB_DEVICE_ID_MATCH_DEVICE,
525 .idVendor = 0x04DD,
526 .idProduct = 0x8005, /* A-300 */
527 ZAURUS_MASTER_INTERFACE,
528 .driver_info = 0,
529}, {
530 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
531 | USB_DEVICE_ID_MATCH_DEVICE,
532 .idVendor = 0x04DD,
533 .idProduct = 0x8006, /* B-500/SL-5600 */
534 ZAURUS_MASTER_INTERFACE,
535 .driver_info = 0,
536}, {
537 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
538 | USB_DEVICE_ID_MATCH_DEVICE,
539 .idVendor = 0x04DD,
540 .idProduct = 0x8007, /* C-700 */
541 ZAURUS_MASTER_INTERFACE,
542 .driver_info = 0,
543}, {
544 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
545 | USB_DEVICE_ID_MATCH_DEVICE,
546 .idVendor = 0x04DD,
547 .idProduct = 0x9031, /* C-750 C-760 */
548 ZAURUS_MASTER_INTERFACE,
549 .driver_info = 0,
550}, {
551 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
552 | USB_DEVICE_ID_MATCH_DEVICE,
553 .idVendor = 0x04DD,
554 .idProduct = 0x9032, /* SL-6000 */
555 ZAURUS_MASTER_INTERFACE,
556 .driver_info = 0,
557}, {
558 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
559 | USB_DEVICE_ID_MATCH_DEVICE,
560 .idVendor = 0x04DD,
561 /* reported with some C860 units */
562 .idProduct = 0x9050, /* C-860 */
563 ZAURUS_MASTER_INTERFACE,
564 .driver_info = 0,
565},
566
567/* Olympus has some models with a Zaurus-compatible option.
568 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
569 */
570{
571 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
572 | USB_DEVICE_ID_MATCH_DEVICE,
573 .idVendor = 0x07B4,
574 .idProduct = 0x0F02, /* R-1000 */
575 ZAURUS_MASTER_INTERFACE,
576 .driver_info = 0,
577},
578
579/* LG Electronics VL600 wants additional headers on every frame */
580{
581 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
582 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
583 .driver_info = 0,
584},
585
586/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
587{
588 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
589 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
590 .driver_info = 0,
591},
592
593/* Novatel USB551L and MC551 - handled by qmi_wwan */
594{
595 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
596 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
597 .driver_info = 0,
598},
599
600/* Novatel E362 - handled by qmi_wwan */
601{
602 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
603 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
604 .driver_info = 0,
605},
606
607/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
608{
609 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
610 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
611 .driver_info = 0,
612},
613
614/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
615{
616 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
617 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
618 .driver_info = 0,
619},
620
621/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
622{
623 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
624 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
625 .driver_info = 0,
626},
627
628/* Novatel Expedite E371 - handled by qmi_wwan */
629{
630 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
631 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
632 .driver_info = 0,
633},
634
635/* AnyDATA ADU960S - handled by qmi_wwan */
636{
637 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
638 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
639 .driver_info = 0,
640},
641
642/* Huawei E1820 - handled by qmi_wwan */
643{
644 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
645 .driver_info = 0,
646},
647
648/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
649{
650 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
651 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
652 .driver_info = 0,
653},
654
655/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
656{
657 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
658 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
659 .driver_info = 0,
660},
661
662/* Samsung USB Ethernet Adapters */
663{
664 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
665 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
666 .driver_info = 0,
667},
668
669/* WHITELIST!!!
670 *
671 * CDC Ether uses two interfaces, not necessarily consecutive.
672 * We match the main interface, ignoring the optional device
673 * class so we could handle devices that aren't exclusively
674 * CDC ether.
675 *
676 * NOTE: this match must come AFTER entries blacklisting devices
677 * because of bugs/quirks in a given product (like Zaurus, above).
678 */
679{
680 /* ZTE (Vodafone) K3805-Z */
681 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
682 USB_CDC_SUBCLASS_ETHERNET,
683 USB_CDC_PROTO_NONE),
684 .driver_info = (unsigned long)&wwan_info,
685}, {
686 /* ZTE (Vodafone) K3806-Z */
687 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
688 USB_CDC_SUBCLASS_ETHERNET,
689 USB_CDC_PROTO_NONE),
690 .driver_info = (unsigned long)&wwan_info,
691}, {
692 /* ZTE (Vodafone) K4510-Z */
693 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
694 USB_CDC_SUBCLASS_ETHERNET,
695 USB_CDC_PROTO_NONE),
696 .driver_info = (unsigned long)&wwan_info,
697}, {
698 /* ZTE (Vodafone) K3770-Z */
699 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
700 USB_CDC_SUBCLASS_ETHERNET,
701 USB_CDC_PROTO_NONE),
702 .driver_info = (unsigned long)&wwan_info,
703}, {
704 /* ZTE (Vodafone) K3772-Z */
705 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
706 USB_CDC_SUBCLASS_ETHERNET,
707 USB_CDC_PROTO_NONE),
708 .driver_info = (unsigned long)&wwan_info,
709}, {
710 /* Telit modules */
711 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
712 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
713 .driver_info = (kernel_ulong_t) &wwan_info,
714}, {
715 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
716 USB_CDC_PROTO_NONE),
717 .driver_info = (unsigned long) &cdc_info,
718}, {
719 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
720 USB_CDC_PROTO_NONE),
721 .driver_info = (unsigned long)&wwan_info,
722
723}, {
724 /* Various Huawei modems with a network port like the UMG1831 */
725 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
726 USB_CDC_SUBCLASS_ETHERNET, 255),
727 .driver_info = (unsigned long)&wwan_info,
728},
729 { }, /* END */
730};
731MODULE_DEVICE_TABLE(usb, products);
732
733static struct usb_driver cdc_driver = {
734 .name = "cdc_ether",
735 .id_table = products,
736 .probe = usbnet_probe,
737 .disconnect = usbnet_disconnect,
738 .suspend = usbnet_suspend,
739 .resume = usbnet_resume,
740 .reset_resume = usbnet_resume,
741 .supports_autosuspend = 1,
742 .disable_hub_initiated_lpm = 1,
743};
744
745module_usb_driver(cdc_driver);
746
747MODULE_AUTHOR("David Brownell");
748MODULE_DESCRIPTION("USB CDC Ethernet devices");
749MODULE_LICENSE("GPL");
1/*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 */
19
20// #define DEBUG // error path messages, extra info
21// #define VERBOSE // more; success messages
22
23#include <linux/module.h>
24#include <linux/netdevice.h>
25#include <linux/etherdevice.h>
26#include <linux/ethtool.h>
27#include <linux/workqueue.h>
28#include <linux/mii.h>
29#include <linux/usb.h>
30#include <linux/usb/cdc.h>
31#include <linux/usb/usbnet.h>
32
33
34#if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
35
36static int is_rndis(struct usb_interface_descriptor *desc)
37{
38 return (desc->bInterfaceClass == USB_CLASS_COMM &&
39 desc->bInterfaceSubClass == 2 &&
40 desc->bInterfaceProtocol == 0xff);
41}
42
43static int is_activesync(struct usb_interface_descriptor *desc)
44{
45 return (desc->bInterfaceClass == USB_CLASS_MISC &&
46 desc->bInterfaceSubClass == 1 &&
47 desc->bInterfaceProtocol == 1);
48}
49
50static int is_wireless_rndis(struct usb_interface_descriptor *desc)
51{
52 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53 desc->bInterfaceSubClass == 1 &&
54 desc->bInterfaceProtocol == 3);
55}
56
57#else
58
59#define is_rndis(desc) 0
60#define is_activesync(desc) 0
61#define is_wireless_rndis(desc) 0
62
63#endif
64
65static const u8 mbm_guid[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
68};
69
70static void usbnet_cdc_update_filter(struct usbnet *dev)
71{
72 struct cdc_state *info = (void *) &dev->data;
73 struct usb_interface *intf = info->control;
74 struct net_device *net = dev->net;
75
76 u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
77 | USB_CDC_PACKET_TYPE_BROADCAST;
78
79 /* filtering on the device is an optional feature and not worth
80 * the hassle so we just roughly care about snooping and if any
81 * multicast is requested, we take every multicast
82 */
83 if (net->flags & IFF_PROMISC)
84 cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
85 if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
86 cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
87
88 usb_control_msg(dev->udev,
89 usb_sndctrlpipe(dev->udev, 0),
90 USB_CDC_SET_ETHERNET_PACKET_FILTER,
91 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
92 cdc_filter,
93 intf->cur_altsetting->desc.bInterfaceNumber,
94 NULL,
95 0,
96 USB_CTRL_SET_TIMEOUT
97 );
98}
99
100/* probes control interface, claims data interface, collects the bulk
101 * endpoints, activates data interface (if needed), maybe sets MTU.
102 * all pure cdc, except for certain firmware workarounds, and knowing
103 * that rndis uses one different rule.
104 */
105int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
106{
107 u8 *buf = intf->cur_altsetting->extra;
108 int len = intf->cur_altsetting->extralen;
109 struct usb_interface_descriptor *d;
110 struct cdc_state *info = (void *) &dev->data;
111 int status;
112 int rndis;
113 bool android_rndis_quirk = false;
114 struct usb_driver *driver = driver_of(intf);
115 struct usb_cdc_parsed_header header;
116
117 if (sizeof(dev->data) < sizeof(*info))
118 return -EDOM;
119
120 /* expect strict spec conformance for the descriptors, but
121 * cope with firmware which stores them in the wrong place
122 */
123 if (len == 0 && dev->udev->actconfig->extralen) {
124 /* Motorola SB4100 (and others: Brad Hards says it's
125 * from a Broadcom design) put CDC descriptors here
126 */
127 buf = dev->udev->actconfig->extra;
128 len = dev->udev->actconfig->extralen;
129 dev_dbg(&intf->dev, "CDC descriptors on config\n");
130 }
131
132 /* Maybe CDC descriptors are after the endpoint? This bug has
133 * been seen on some 2Wire Inc RNDIS-ish products.
134 */
135 if (len == 0) {
136 struct usb_host_endpoint *hep;
137
138 hep = intf->cur_altsetting->endpoint;
139 if (hep) {
140 buf = hep->extra;
141 len = hep->extralen;
142 }
143 if (len)
144 dev_dbg(&intf->dev,
145 "CDC descriptors on endpoint\n");
146 }
147
148 /* this assumes that if there's a non-RNDIS vendor variant
149 * of cdc-acm, it'll fail RNDIS requests cleanly.
150 */
151 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
152 is_activesync(&intf->cur_altsetting->desc) ||
153 is_wireless_rndis(&intf->cur_altsetting->desc));
154
155 memset(info, 0, sizeof(*info));
156 info->control = intf;
157
158 cdc_parse_cdc_header(&header, intf, buf, len);
159
160 info->u = header.usb_cdc_union_desc;
161 info->header = header.usb_cdc_header_desc;
162 info->ether = header.usb_cdc_ether_desc;
163 if (!info->u) {
164 if (rndis)
165 goto skip;
166 else /* in that case a quirk is mandatory */
167 goto bad_desc;
168 }
169 /* we need a master/control interface (what we're
170 * probed with) and a slave/data interface; union
171 * descriptors sort this all out.
172 */
173 info->control = usb_ifnum_to_if(dev->udev,
174 info->u->bMasterInterface0);
175 info->data = usb_ifnum_to_if(dev->udev,
176 info->u->bSlaveInterface0);
177 if (!info->control || !info->data) {
178 dev_dbg(&intf->dev,
179 "master #%u/%p slave #%u/%p\n",
180 info->u->bMasterInterface0,
181 info->control,
182 info->u->bSlaveInterface0,
183 info->data);
184 /* fall back to hard-wiring for RNDIS */
185 if (rndis) {
186 android_rndis_quirk = true;
187 goto skip;
188 }
189 goto bad_desc;
190 }
191 if (info->control != intf) {
192 dev_dbg(&intf->dev, "bogus CDC Union\n");
193 /* Ambit USB Cable Modem (and maybe others)
194 * interchanges master and slave interface.
195 */
196 if (info->data == intf) {
197 info->data = info->control;
198 info->control = intf;
199 } else
200 goto bad_desc;
201 }
202
203 /* some devices merge these - skip class check */
204 if (info->control == info->data)
205 goto skip;
206
207 /* a data interface altsetting does the real i/o */
208 d = &info->data->cur_altsetting->desc;
209 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
210 dev_dbg(&intf->dev, "slave class %u\n",
211 d->bInterfaceClass);
212 goto bad_desc;
213 }
214skip:
215 if ( rndis &&
216 header.usb_cdc_acm_descriptor &&
217 header.usb_cdc_acm_descriptor->bmCapabilities) {
218 dev_dbg(&intf->dev,
219 "ACM capabilities %02x, not really RNDIS?\n",
220 header.usb_cdc_acm_descriptor->bmCapabilities);
221 goto bad_desc;
222 }
223
224 if (header.usb_cdc_ether_desc) {
225 dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
226 /* because of Zaurus, we may be ignoring the host
227 * side link address we were given.
228 */
229 }
230
231 if (header.usb_cdc_mdlm_desc &&
232 memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
233 dev_dbg(&intf->dev, "GUID doesn't match\n");
234 goto bad_desc;
235 }
236
237 if (header.usb_cdc_mdlm_detail_desc &&
238 header.usb_cdc_mdlm_detail_desc->bLength <
239 (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
240 dev_dbg(&intf->dev, "Descriptor too short\n");
241 goto bad_desc;
242 }
243
244
245
246 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
247 * CDC descriptors, so we'll hard-wire the interfaces and not check
248 * for descriptors.
249 *
250 * Some Android RNDIS devices have a CDC Union descriptor pointing
251 * to non-existing interfaces. Ignore that and attempt the same
252 * hard-wired 0 and 1 interfaces.
253 */
254 if (rndis && (!info->u || android_rndis_quirk)) {
255 info->control = usb_ifnum_to_if(dev->udev, 0);
256 info->data = usb_ifnum_to_if(dev->udev, 1);
257 if (!info->control || !info->data || info->control != intf) {
258 dev_dbg(&intf->dev,
259 "rndis: master #0/%p slave #1/%p\n",
260 info->control,
261 info->data);
262 goto bad_desc;
263 }
264
265 } else if (!info->header || (!rndis && !info->ether)) {
266 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
267 info->header ? "" : "header ",
268 info->u ? "" : "union ",
269 info->ether ? "" : "ether ");
270 goto bad_desc;
271 }
272
273 /* claim data interface and set it up ... with side effects.
274 * network traffic can't flow until an altsetting is enabled.
275 */
276 if (info->data != info->control) {
277 status = usb_driver_claim_interface(driver, info->data, dev);
278 if (status < 0)
279 return status;
280 }
281 status = usbnet_get_endpoints(dev, info->data);
282 if (status < 0) {
283 /* ensure immediate exit from usbnet_disconnect */
284 usb_set_intfdata(info->data, NULL);
285 if (info->data != info->control)
286 usb_driver_release_interface(driver, info->data);
287 return status;
288 }
289
290 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
291 if (info->data != info->control)
292 dev->status = NULL;
293 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
294 struct usb_endpoint_descriptor *desc;
295
296 dev->status = &info->control->cur_altsetting->endpoint [0];
297 desc = &dev->status->desc;
298 if (!usb_endpoint_is_int_in(desc) ||
299 (le16_to_cpu(desc->wMaxPacketSize)
300 < sizeof(struct usb_cdc_notification)) ||
301 !desc->bInterval) {
302 dev_dbg(&intf->dev, "bad notification endpoint\n");
303 dev->status = NULL;
304 }
305 }
306 if (rndis && !dev->status) {
307 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
308 usb_set_intfdata(info->data, NULL);
309 usb_driver_release_interface(driver, info->data);
310 return -ENODEV;
311 }
312
313 /* Some devices don't initialise properly. In particular
314 * the packet filter is not reset. There are devices that
315 * don't do reset all the way. So the packet filter should
316 * be set to a sane initial value.
317 */
318 usbnet_cdc_update_filter(dev);
319
320 return 0;
321
322bad_desc:
323 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
324 return -ENODEV;
325}
326EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
327
328void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
329{
330 struct cdc_state *info = (void *) &dev->data;
331 struct usb_driver *driver = driver_of(intf);
332
333 /* combined interface - nothing to do */
334 if (info->data == info->control)
335 return;
336
337 /* disconnect master --> disconnect slave */
338 if (intf == info->control && info->data) {
339 /* ensure immediate exit from usbnet_disconnect */
340 usb_set_intfdata(info->data, NULL);
341 usb_driver_release_interface(driver, info->data);
342 info->data = NULL;
343 }
344
345 /* and vice versa (just in case) */
346 else if (intf == info->data && info->control) {
347 /* ensure immediate exit from usbnet_disconnect */
348 usb_set_intfdata(info->control, NULL);
349 usb_driver_release_interface(driver, info->control);
350 info->control = NULL;
351 }
352}
353EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
354
355/* Communications Device Class, Ethernet Control model
356 *
357 * Takes two interfaces. The DATA interface is inactive till an altsetting
358 * is selected. Configuration data includes class descriptors. There's
359 * an optional status endpoint on the control interface.
360 *
361 * This should interop with whatever the 2.4 "CDCEther.c" driver
362 * (by Brad Hards) talked with, with more functionality.
363 */
364
365static void dumpspeed(struct usbnet *dev, __le32 *speeds)
366{
367 netif_info(dev, timer, dev->net,
368 "link speeds: %u kbps up, %u kbps down\n",
369 __le32_to_cpu(speeds[0]) / 1000,
370 __le32_to_cpu(speeds[1]) / 1000);
371}
372
373void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
374{
375 struct usb_cdc_notification *event;
376
377 if (urb->actual_length < sizeof(*event))
378 return;
379
380 /* SPEED_CHANGE can get split into two 8-byte packets */
381 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
382 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
383 return;
384 }
385
386 event = urb->transfer_buffer;
387 switch (event->bNotificationType) {
388 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
389 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
390 event->wValue ? "on" : "off");
391 usbnet_link_change(dev, !!event->wValue, 0);
392 break;
393 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
394 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
395 urb->actual_length);
396 if (urb->actual_length != (sizeof(*event) + 8))
397 set_bit(EVENT_STS_SPLIT, &dev->flags);
398 else
399 dumpspeed(dev, (__le32 *) &event[1]);
400 break;
401 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
402 * but there are no standard formats for the response data.
403 */
404 default:
405 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
406 event->bNotificationType);
407 break;
408 }
409}
410EXPORT_SYMBOL_GPL(usbnet_cdc_status);
411
412int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
413{
414 int status;
415 struct cdc_state *info = (void *) &dev->data;
416
417 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
418 < sizeof(struct cdc_state)));
419
420 status = usbnet_generic_cdc_bind(dev, intf);
421 if (status < 0)
422 return status;
423
424 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
425 if (status < 0) {
426 usb_set_intfdata(info->data, NULL);
427 usb_driver_release_interface(driver_of(intf), info->data);
428 return status;
429 }
430
431 return 0;
432}
433EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
434
435static const struct driver_info cdc_info = {
436 .description = "CDC Ethernet Device",
437 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
438 .bind = usbnet_cdc_bind,
439 .unbind = usbnet_cdc_unbind,
440 .status = usbnet_cdc_status,
441 .set_rx_mode = usbnet_cdc_update_filter,
442 .manage_power = usbnet_manage_power,
443};
444
445static const struct driver_info wwan_info = {
446 .description = "Mobile Broadband Network Device",
447 .flags = FLAG_WWAN,
448 .bind = usbnet_cdc_bind,
449 .unbind = usbnet_cdc_unbind,
450 .status = usbnet_cdc_status,
451 .set_rx_mode = usbnet_cdc_update_filter,
452 .manage_power = usbnet_manage_power,
453};
454
455/*-------------------------------------------------------------------------*/
456
457#define HUAWEI_VENDOR_ID 0x12D1
458#define NOVATEL_VENDOR_ID 0x1410
459#define ZTE_VENDOR_ID 0x19D2
460#define DELL_VENDOR_ID 0x413C
461#define REALTEK_VENDOR_ID 0x0bda
462#define SAMSUNG_VENDOR_ID 0x04e8
463#define LENOVO_VENDOR_ID 0x17ef
464#define NVIDIA_VENDOR_ID 0x0955
465
466static const struct usb_device_id products[] = {
467/* BLACKLIST !!
468 *
469 * First blacklist any products that are egregiously nonconformant
470 * with the CDC Ethernet specs. Minor braindamage we cope with; when
471 * they're not even trying, needing a separate driver is only the first
472 * of the differences to show up.
473 */
474
475#define ZAURUS_MASTER_INTERFACE \
476 .bInterfaceClass = USB_CLASS_COMM, \
477 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
478 .bInterfaceProtocol = USB_CDC_PROTO_NONE
479
480/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
481 * wire-incompatible with true CDC Ethernet implementations.
482 * (And, it seems, needlessly so...)
483 */
484{
485 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
486 | USB_DEVICE_ID_MATCH_DEVICE,
487 .idVendor = 0x04DD,
488 .idProduct = 0x8004,
489 ZAURUS_MASTER_INTERFACE,
490 .driver_info = 0,
491},
492
493/* PXA-25x based Sharp Zaurii. Note that it seems some of these
494 * (later models especially) may have shipped only with firmware
495 * advertising false "CDC MDLM" compatibility ... but we're not
496 * clear which models did that, so for now let's assume the worst.
497 */
498{
499 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
500 | USB_DEVICE_ID_MATCH_DEVICE,
501 .idVendor = 0x04DD,
502 .idProduct = 0x8005, /* A-300 */
503 ZAURUS_MASTER_INTERFACE,
504 .driver_info = 0,
505}, {
506 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
507 | USB_DEVICE_ID_MATCH_DEVICE,
508 .idVendor = 0x04DD,
509 .idProduct = 0x8006, /* B-500/SL-5600 */
510 ZAURUS_MASTER_INTERFACE,
511 .driver_info = 0,
512}, {
513 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
514 | USB_DEVICE_ID_MATCH_DEVICE,
515 .idVendor = 0x04DD,
516 .idProduct = 0x8007, /* C-700 */
517 ZAURUS_MASTER_INTERFACE,
518 .driver_info = 0,
519}, {
520 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
521 | USB_DEVICE_ID_MATCH_DEVICE,
522 .idVendor = 0x04DD,
523 .idProduct = 0x9031, /* C-750 C-760 */
524 ZAURUS_MASTER_INTERFACE,
525 .driver_info = 0,
526}, {
527 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
528 | USB_DEVICE_ID_MATCH_DEVICE,
529 .idVendor = 0x04DD,
530 .idProduct = 0x9032, /* SL-6000 */
531 ZAURUS_MASTER_INTERFACE,
532 .driver_info = 0,
533}, {
534 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
535 | USB_DEVICE_ID_MATCH_DEVICE,
536 .idVendor = 0x04DD,
537 /* reported with some C860 units */
538 .idProduct = 0x9050, /* C-860 */
539 ZAURUS_MASTER_INTERFACE,
540 .driver_info = 0,
541},
542
543/* Olympus has some models with a Zaurus-compatible option.
544 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
545 */
546{
547 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
548 | USB_DEVICE_ID_MATCH_DEVICE,
549 .idVendor = 0x07B4,
550 .idProduct = 0x0F02, /* R-1000 */
551 ZAURUS_MASTER_INTERFACE,
552 .driver_info = 0,
553},
554
555/* LG Electronics VL600 wants additional headers on every frame */
556{
557 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
558 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
559 .driver_info = 0,
560},
561
562/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
563{
564 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
565 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
566 .driver_info = 0,
567},
568
569/* Novatel USB551L and MC551 - handled by qmi_wwan */
570{
571 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
572 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
573 .driver_info = 0,
574},
575
576/* Novatel E362 - handled by qmi_wwan */
577{
578 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
579 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
580 .driver_info = 0,
581},
582
583/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
584{
585 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
586 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
587 .driver_info = 0,
588},
589
590/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
591{
592 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
593 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
594 .driver_info = 0,
595},
596
597/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
598{
599 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
600 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
601 .driver_info = 0,
602},
603
604/* Novatel Expedite E371 - handled by qmi_wwan */
605{
606 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
607 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
608 .driver_info = 0,
609},
610
611/* AnyDATA ADU960S - handled by qmi_wwan */
612{
613 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
614 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
615 .driver_info = 0,
616},
617
618/* Huawei E1820 - handled by qmi_wwan */
619{
620 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
621 .driver_info = 0,
622},
623
624/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
625{
626 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
627 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
628 .driver_info = 0,
629},
630
631/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
632{
633 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
634 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
635 .driver_info = 0,
636},
637
638/* Samsung USB Ethernet Adapters */
639{
640 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
641 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
642 .driver_info = 0,
643},
644
645/* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
646{
647 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
648 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
649 .driver_info = 0,
650},
651
652/* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
653{
654 USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
655 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
656 .driver_info = 0,
657},
658
659/* WHITELIST!!!
660 *
661 * CDC Ether uses two interfaces, not necessarily consecutive.
662 * We match the main interface, ignoring the optional device
663 * class so we could handle devices that aren't exclusively
664 * CDC ether.
665 *
666 * NOTE: this match must come AFTER entries blacklisting devices
667 * because of bugs/quirks in a given product (like Zaurus, above).
668 */
669{
670 /* ZTE (Vodafone) K3805-Z */
671 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
672 USB_CDC_SUBCLASS_ETHERNET,
673 USB_CDC_PROTO_NONE),
674 .driver_info = (unsigned long)&wwan_info,
675}, {
676 /* ZTE (Vodafone) K3806-Z */
677 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
678 USB_CDC_SUBCLASS_ETHERNET,
679 USB_CDC_PROTO_NONE),
680 .driver_info = (unsigned long)&wwan_info,
681}, {
682 /* ZTE (Vodafone) K4510-Z */
683 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
684 USB_CDC_SUBCLASS_ETHERNET,
685 USB_CDC_PROTO_NONE),
686 .driver_info = (unsigned long)&wwan_info,
687}, {
688 /* ZTE (Vodafone) K3770-Z */
689 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
690 USB_CDC_SUBCLASS_ETHERNET,
691 USB_CDC_PROTO_NONE),
692 .driver_info = (unsigned long)&wwan_info,
693}, {
694 /* ZTE (Vodafone) K3772-Z */
695 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
696 USB_CDC_SUBCLASS_ETHERNET,
697 USB_CDC_PROTO_NONE),
698 .driver_info = (unsigned long)&wwan_info,
699}, {
700 /* Telit modules */
701 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
702 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
703 .driver_info = (kernel_ulong_t) &wwan_info,
704}, {
705 /* Dell DW5580 modules */
706 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
707 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
708 .driver_info = (kernel_ulong_t)&wwan_info,
709}, {
710 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
711 USB_CDC_PROTO_NONE),
712 .driver_info = (unsigned long) &cdc_info,
713}, {
714 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
715 USB_CDC_PROTO_NONE),
716 .driver_info = (unsigned long)&wwan_info,
717
718}, {
719 /* Various Huawei modems with a network port like the UMG1831 */
720 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
721 USB_CDC_SUBCLASS_ETHERNET, 255),
722 .driver_info = (unsigned long)&wwan_info,
723},
724 { }, /* END */
725};
726MODULE_DEVICE_TABLE(usb, products);
727
728static struct usb_driver cdc_driver = {
729 .name = "cdc_ether",
730 .id_table = products,
731 .probe = usbnet_probe,
732 .disconnect = usbnet_disconnect,
733 .suspend = usbnet_suspend,
734 .resume = usbnet_resume,
735 .reset_resume = usbnet_resume,
736 .supports_autosuspend = 1,
737 .disable_hub_initiated_lpm = 1,
738};
739
740module_usb_driver(cdc_driver);
741
742MODULE_AUTHOR("David Brownell");
743MODULE_DESCRIPTION("USB CDC Ethernet devices");
744MODULE_LICENSE("GPL");