Loading...
1/*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 */
19
20// #define DEBUG // error path messages, extra info
21// #define VERBOSE // more; success messages
22
23#include <linux/module.h>
24#include <linux/netdevice.h>
25#include <linux/etherdevice.h>
26#include <linux/ethtool.h>
27#include <linux/workqueue.h>
28#include <linux/mii.h>
29#include <linux/usb.h>
30#include <linux/usb/cdc.h>
31#include <linux/usb/usbnet.h>
32
33
34#if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
35
36static int is_rndis(struct usb_interface_descriptor *desc)
37{
38 return (desc->bInterfaceClass == USB_CLASS_COMM &&
39 desc->bInterfaceSubClass == 2 &&
40 desc->bInterfaceProtocol == 0xff);
41}
42
43static int is_activesync(struct usb_interface_descriptor *desc)
44{
45 return (desc->bInterfaceClass == USB_CLASS_MISC &&
46 desc->bInterfaceSubClass == 1 &&
47 desc->bInterfaceProtocol == 1);
48}
49
50static int is_wireless_rndis(struct usb_interface_descriptor *desc)
51{
52 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53 desc->bInterfaceSubClass == 1 &&
54 desc->bInterfaceProtocol == 3);
55}
56
57#else
58
59#define is_rndis(desc) 0
60#define is_activesync(desc) 0
61#define is_wireless_rndis(desc) 0
62
63#endif
64
65static const u8 mbm_guid[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
68};
69
70/* probes control interface, claims data interface, collects the bulk
71 * endpoints, activates data interface (if needed), maybe sets MTU.
72 * all pure cdc, except for certain firmware workarounds, and knowing
73 * that rndis uses one different rule.
74 */
75int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
76{
77 u8 *buf = intf->cur_altsetting->extra;
78 int len = intf->cur_altsetting->extralen;
79 struct usb_interface_descriptor *d;
80 struct cdc_state *info = (void *) &dev->data;
81 int status;
82 int rndis;
83 bool android_rndis_quirk = false;
84 struct usb_driver *driver = driver_of(intf);
85 struct usb_cdc_mdlm_desc *desc = NULL;
86 struct usb_cdc_mdlm_detail_desc *detail = NULL;
87
88 if (sizeof(dev->data) < sizeof(*info))
89 return -EDOM;
90
91 /* expect strict spec conformance for the descriptors, but
92 * cope with firmware which stores them in the wrong place
93 */
94 if (len == 0 && dev->udev->actconfig->extralen) {
95 /* Motorola SB4100 (and others: Brad Hards says it's
96 * from a Broadcom design) put CDC descriptors here
97 */
98 buf = dev->udev->actconfig->extra;
99 len = dev->udev->actconfig->extralen;
100 dev_dbg(&intf->dev, "CDC descriptors on config\n");
101 }
102
103 /* Maybe CDC descriptors are after the endpoint? This bug has
104 * been seen on some 2Wire Inc RNDIS-ish products.
105 */
106 if (len == 0) {
107 struct usb_host_endpoint *hep;
108
109 hep = intf->cur_altsetting->endpoint;
110 if (hep) {
111 buf = hep->extra;
112 len = hep->extralen;
113 }
114 if (len)
115 dev_dbg(&intf->dev,
116 "CDC descriptors on endpoint\n");
117 }
118
119 /* this assumes that if there's a non-RNDIS vendor variant
120 * of cdc-acm, it'll fail RNDIS requests cleanly.
121 */
122 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
123 is_activesync(&intf->cur_altsetting->desc) ||
124 is_wireless_rndis(&intf->cur_altsetting->desc));
125
126 memset(info, 0, sizeof(*info));
127 info->control = intf;
128 while (len > 3) {
129 if (buf[1] != USB_DT_CS_INTERFACE)
130 goto next_desc;
131
132 /* use bDescriptorSubType to identify the CDC descriptors.
133 * We expect devices with CDC header and union descriptors.
134 * For CDC Ethernet we need the ethernet descriptor.
135 * For RNDIS, ignore two (pointless) CDC modem descriptors
136 * in favor of a complicated OID-based RPC scheme doing what
137 * CDC Ethernet achieves with a simple descriptor.
138 */
139 switch (buf[2]) {
140 case USB_CDC_HEADER_TYPE:
141 if (info->header) {
142 dev_dbg(&intf->dev, "extra CDC header\n");
143 goto bad_desc;
144 }
145 info->header = (void *) buf;
146 if (info->header->bLength != sizeof(*info->header)) {
147 dev_dbg(&intf->dev, "CDC header len %u\n",
148 info->header->bLength);
149 goto bad_desc;
150 }
151 break;
152 case USB_CDC_ACM_TYPE:
153 /* paranoia: disambiguate a "real" vendor-specific
154 * modem interface from an RNDIS non-modem.
155 */
156 if (rndis) {
157 struct usb_cdc_acm_descriptor *acm;
158
159 acm = (void *) buf;
160 if (acm->bmCapabilities) {
161 dev_dbg(&intf->dev,
162 "ACM capabilities %02x, "
163 "not really RNDIS?\n",
164 acm->bmCapabilities);
165 goto bad_desc;
166 }
167 }
168 break;
169 case USB_CDC_UNION_TYPE:
170 if (info->u) {
171 dev_dbg(&intf->dev, "extra CDC union\n");
172 goto bad_desc;
173 }
174 info->u = (void *) buf;
175 if (info->u->bLength != sizeof(*info->u)) {
176 dev_dbg(&intf->dev, "CDC union len %u\n",
177 info->u->bLength);
178 goto bad_desc;
179 }
180
181 /* we need a master/control interface (what we're
182 * probed with) and a slave/data interface; union
183 * descriptors sort this all out.
184 */
185 info->control = usb_ifnum_to_if(dev->udev,
186 info->u->bMasterInterface0);
187 info->data = usb_ifnum_to_if(dev->udev,
188 info->u->bSlaveInterface0);
189 if (!info->control || !info->data) {
190 dev_dbg(&intf->dev,
191 "master #%u/%p slave #%u/%p\n",
192 info->u->bMasterInterface0,
193 info->control,
194 info->u->bSlaveInterface0,
195 info->data);
196 /* fall back to hard-wiring for RNDIS */
197 if (rndis) {
198 android_rndis_quirk = true;
199 goto next_desc;
200 }
201 goto bad_desc;
202 }
203 if (info->control != intf) {
204 dev_dbg(&intf->dev, "bogus CDC Union\n");
205 /* Ambit USB Cable Modem (and maybe others)
206 * interchanges master and slave interface.
207 */
208 if (info->data == intf) {
209 info->data = info->control;
210 info->control = intf;
211 } else
212 goto bad_desc;
213 }
214
215 /* some devices merge these - skip class check */
216 if (info->control == info->data)
217 goto next_desc;
218
219 /* a data interface altsetting does the real i/o */
220 d = &info->data->cur_altsetting->desc;
221 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
222 dev_dbg(&intf->dev, "slave class %u\n",
223 d->bInterfaceClass);
224 goto bad_desc;
225 }
226 break;
227 case USB_CDC_ETHERNET_TYPE:
228 if (info->ether) {
229 dev_dbg(&intf->dev, "extra CDC ether\n");
230 goto bad_desc;
231 }
232 info->ether = (void *) buf;
233 if (info->ether->bLength != sizeof(*info->ether)) {
234 dev_dbg(&intf->dev, "CDC ether len %u\n",
235 info->ether->bLength);
236 goto bad_desc;
237 }
238 dev->hard_mtu = le16_to_cpu(
239 info->ether->wMaxSegmentSize);
240 /* because of Zaurus, we may be ignoring the host
241 * side link address we were given.
242 */
243 break;
244 case USB_CDC_MDLM_TYPE:
245 if (desc) {
246 dev_dbg(&intf->dev, "extra MDLM descriptor\n");
247 goto bad_desc;
248 }
249
250 desc = (void *)buf;
251
252 if (desc->bLength != sizeof(*desc))
253 goto bad_desc;
254
255 if (memcmp(&desc->bGUID, mbm_guid, 16))
256 goto bad_desc;
257 break;
258 case USB_CDC_MDLM_DETAIL_TYPE:
259 if (detail) {
260 dev_dbg(&intf->dev, "extra MDLM detail descriptor\n");
261 goto bad_desc;
262 }
263
264 detail = (void *)buf;
265
266 if (detail->bGuidDescriptorType == 0) {
267 if (detail->bLength < (sizeof(*detail) + 1))
268 goto bad_desc;
269 } else
270 goto bad_desc;
271 break;
272 }
273next_desc:
274 len -= buf[0]; /* bLength */
275 buf += buf[0];
276 }
277
278 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
279 * CDC descriptors, so we'll hard-wire the interfaces and not check
280 * for descriptors.
281 *
282 * Some Android RNDIS devices have a CDC Union descriptor pointing
283 * to non-existing interfaces. Ignore that and attempt the same
284 * hard-wired 0 and 1 interfaces.
285 */
286 if (rndis && (!info->u || android_rndis_quirk)) {
287 info->control = usb_ifnum_to_if(dev->udev, 0);
288 info->data = usb_ifnum_to_if(dev->udev, 1);
289 if (!info->control || !info->data || info->control != intf) {
290 dev_dbg(&intf->dev,
291 "rndis: master #0/%p slave #1/%p\n",
292 info->control,
293 info->data);
294 goto bad_desc;
295 }
296
297 } else if (!info->header || !info->u || (!rndis && !info->ether)) {
298 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
299 info->header ? "" : "header ",
300 info->u ? "" : "union ",
301 info->ether ? "" : "ether ");
302 goto bad_desc;
303 }
304
305 /* claim data interface and set it up ... with side effects.
306 * network traffic can't flow until an altsetting is enabled.
307 */
308 if (info->data != info->control) {
309 status = usb_driver_claim_interface(driver, info->data, dev);
310 if (status < 0)
311 return status;
312 }
313 status = usbnet_get_endpoints(dev, info->data);
314 if (status < 0) {
315 /* ensure immediate exit from usbnet_disconnect */
316 usb_set_intfdata(info->data, NULL);
317 if (info->data != info->control)
318 usb_driver_release_interface(driver, info->data);
319 return status;
320 }
321
322 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
323 if (info->data != info->control)
324 dev->status = NULL;
325 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
326 struct usb_endpoint_descriptor *desc;
327
328 dev->status = &info->control->cur_altsetting->endpoint [0];
329 desc = &dev->status->desc;
330 if (!usb_endpoint_is_int_in(desc) ||
331 (le16_to_cpu(desc->wMaxPacketSize)
332 < sizeof(struct usb_cdc_notification)) ||
333 !desc->bInterval) {
334 dev_dbg(&intf->dev, "bad notification endpoint\n");
335 dev->status = NULL;
336 }
337 }
338 if (rndis && !dev->status) {
339 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
340 usb_set_intfdata(info->data, NULL);
341 usb_driver_release_interface(driver, info->data);
342 return -ENODEV;
343 }
344 return 0;
345
346bad_desc:
347 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
348 return -ENODEV;
349}
350EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
351
352void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
353{
354 struct cdc_state *info = (void *) &dev->data;
355 struct usb_driver *driver = driver_of(intf);
356
357 /* combined interface - nothing to do */
358 if (info->data == info->control)
359 return;
360
361 /* disconnect master --> disconnect slave */
362 if (intf == info->control && info->data) {
363 /* ensure immediate exit from usbnet_disconnect */
364 usb_set_intfdata(info->data, NULL);
365 usb_driver_release_interface(driver, info->data);
366 info->data = NULL;
367 }
368
369 /* and vice versa (just in case) */
370 else if (intf == info->data && info->control) {
371 /* ensure immediate exit from usbnet_disconnect */
372 usb_set_intfdata(info->control, NULL);
373 usb_driver_release_interface(driver, info->control);
374 info->control = NULL;
375 }
376}
377EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
378
379/* Communications Device Class, Ethernet Control model
380 *
381 * Takes two interfaces. The DATA interface is inactive till an altsetting
382 * is selected. Configuration data includes class descriptors. There's
383 * an optional status endpoint on the control interface.
384 *
385 * This should interop with whatever the 2.4 "CDCEther.c" driver
386 * (by Brad Hards) talked with, with more functionality.
387 */
388
389static void dumpspeed(struct usbnet *dev, __le32 *speeds)
390{
391 netif_info(dev, timer, dev->net,
392 "link speeds: %u kbps up, %u kbps down\n",
393 __le32_to_cpu(speeds[0]) / 1000,
394 __le32_to_cpu(speeds[1]) / 1000);
395}
396
397void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
398{
399 struct usb_cdc_notification *event;
400
401 if (urb->actual_length < sizeof(*event))
402 return;
403
404 /* SPEED_CHANGE can get split into two 8-byte packets */
405 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
406 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
407 return;
408 }
409
410 event = urb->transfer_buffer;
411 switch (event->bNotificationType) {
412 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
413 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
414 event->wValue ? "on" : "off");
415 usbnet_link_change(dev, !!event->wValue, 0);
416 break;
417 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
418 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
419 urb->actual_length);
420 if (urb->actual_length != (sizeof(*event) + 8))
421 set_bit(EVENT_STS_SPLIT, &dev->flags);
422 else
423 dumpspeed(dev, (__le32 *) &event[1]);
424 break;
425 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
426 * but there are no standard formats for the response data.
427 */
428 default:
429 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
430 event->bNotificationType);
431 break;
432 }
433}
434EXPORT_SYMBOL_GPL(usbnet_cdc_status);
435
436int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
437{
438 int status;
439 struct cdc_state *info = (void *) &dev->data;
440
441 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
442 < sizeof(struct cdc_state)));
443
444 status = usbnet_generic_cdc_bind(dev, intf);
445 if (status < 0)
446 return status;
447
448 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
449 if (status < 0) {
450 usb_set_intfdata(info->data, NULL);
451 usb_driver_release_interface(driver_of(intf), info->data);
452 return status;
453 }
454
455 /* FIXME cdc-ether has some multicast code too, though it complains
456 * in routine cases. info->ether describes the multicast support.
457 * Implement that here, manipulating the cdc filter as needed.
458 */
459 return 0;
460}
461EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
462
463static const struct driver_info cdc_info = {
464 .description = "CDC Ethernet Device",
465 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
466 .bind = usbnet_cdc_bind,
467 .unbind = usbnet_cdc_unbind,
468 .status = usbnet_cdc_status,
469 .manage_power = usbnet_manage_power,
470};
471
472static const struct driver_info wwan_info = {
473 .description = "Mobile Broadband Network Device",
474 .flags = FLAG_WWAN,
475 .bind = usbnet_cdc_bind,
476 .unbind = usbnet_cdc_unbind,
477 .status = usbnet_cdc_status,
478 .manage_power = usbnet_manage_power,
479};
480
481/*-------------------------------------------------------------------------*/
482
483#define HUAWEI_VENDOR_ID 0x12D1
484#define NOVATEL_VENDOR_ID 0x1410
485#define ZTE_VENDOR_ID 0x19D2
486#define DELL_VENDOR_ID 0x413C
487#define REALTEK_VENDOR_ID 0x0bda
488#define SAMSUNG_VENDOR_ID 0x04e8
489
490static const struct usb_device_id products[] = {
491/* BLACKLIST !!
492 *
493 * First blacklist any products that are egregiously nonconformant
494 * with the CDC Ethernet specs. Minor braindamage we cope with; when
495 * they're not even trying, needing a separate driver is only the first
496 * of the differences to show up.
497 */
498
499#define ZAURUS_MASTER_INTERFACE \
500 .bInterfaceClass = USB_CLASS_COMM, \
501 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
502 .bInterfaceProtocol = USB_CDC_PROTO_NONE
503
504/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
505 * wire-incompatible with true CDC Ethernet implementations.
506 * (And, it seems, needlessly so...)
507 */
508{
509 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
510 | USB_DEVICE_ID_MATCH_DEVICE,
511 .idVendor = 0x04DD,
512 .idProduct = 0x8004,
513 ZAURUS_MASTER_INTERFACE,
514 .driver_info = 0,
515},
516
517/* PXA-25x based Sharp Zaurii. Note that it seems some of these
518 * (later models especially) may have shipped only with firmware
519 * advertising false "CDC MDLM" compatibility ... but we're not
520 * clear which models did that, so for now let's assume the worst.
521 */
522{
523 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
524 | USB_DEVICE_ID_MATCH_DEVICE,
525 .idVendor = 0x04DD,
526 .idProduct = 0x8005, /* A-300 */
527 ZAURUS_MASTER_INTERFACE,
528 .driver_info = 0,
529}, {
530 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
531 | USB_DEVICE_ID_MATCH_DEVICE,
532 .idVendor = 0x04DD,
533 .idProduct = 0x8006, /* B-500/SL-5600 */
534 ZAURUS_MASTER_INTERFACE,
535 .driver_info = 0,
536}, {
537 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
538 | USB_DEVICE_ID_MATCH_DEVICE,
539 .idVendor = 0x04DD,
540 .idProduct = 0x8007, /* C-700 */
541 ZAURUS_MASTER_INTERFACE,
542 .driver_info = 0,
543}, {
544 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
545 | USB_DEVICE_ID_MATCH_DEVICE,
546 .idVendor = 0x04DD,
547 .idProduct = 0x9031, /* C-750 C-760 */
548 ZAURUS_MASTER_INTERFACE,
549 .driver_info = 0,
550}, {
551 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
552 | USB_DEVICE_ID_MATCH_DEVICE,
553 .idVendor = 0x04DD,
554 .idProduct = 0x9032, /* SL-6000 */
555 ZAURUS_MASTER_INTERFACE,
556 .driver_info = 0,
557}, {
558 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
559 | USB_DEVICE_ID_MATCH_DEVICE,
560 .idVendor = 0x04DD,
561 /* reported with some C860 units */
562 .idProduct = 0x9050, /* C-860 */
563 ZAURUS_MASTER_INTERFACE,
564 .driver_info = 0,
565},
566
567/* Olympus has some models with a Zaurus-compatible option.
568 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
569 */
570{
571 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
572 | USB_DEVICE_ID_MATCH_DEVICE,
573 .idVendor = 0x07B4,
574 .idProduct = 0x0F02, /* R-1000 */
575 ZAURUS_MASTER_INTERFACE,
576 .driver_info = 0,
577},
578
579/* LG Electronics VL600 wants additional headers on every frame */
580{
581 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
582 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
583 .driver_info = 0,
584},
585
586/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
587{
588 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
589 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
590 .driver_info = 0,
591},
592
593/* Novatel USB551L and MC551 - handled by qmi_wwan */
594{
595 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
596 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
597 .driver_info = 0,
598},
599
600/* Novatel E362 - handled by qmi_wwan */
601{
602 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
603 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
604 .driver_info = 0,
605},
606
607/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
608{
609 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
610 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
611 .driver_info = 0,
612},
613
614/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
615{
616 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
617 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
618 .driver_info = 0,
619},
620
621/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
622{
623 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
624 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
625 .driver_info = 0,
626},
627
628/* Novatel Expedite E371 - handled by qmi_wwan */
629{
630 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
631 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
632 .driver_info = 0,
633},
634
635/* AnyDATA ADU960S - handled by qmi_wwan */
636{
637 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
638 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
639 .driver_info = 0,
640},
641
642/* Huawei E1820 - handled by qmi_wwan */
643{
644 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
645 .driver_info = 0,
646},
647
648/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
649{
650 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
651 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
652 .driver_info = 0,
653},
654
655/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
656{
657 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
658 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
659 .driver_info = 0,
660},
661
662/* Samsung USB Ethernet Adapters */
663{
664 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
665 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
666 .driver_info = 0,
667},
668
669/* WHITELIST!!!
670 *
671 * CDC Ether uses two interfaces, not necessarily consecutive.
672 * We match the main interface, ignoring the optional device
673 * class so we could handle devices that aren't exclusively
674 * CDC ether.
675 *
676 * NOTE: this match must come AFTER entries blacklisting devices
677 * because of bugs/quirks in a given product (like Zaurus, above).
678 */
679{
680 /* ZTE (Vodafone) K3805-Z */
681 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
682 USB_CDC_SUBCLASS_ETHERNET,
683 USB_CDC_PROTO_NONE),
684 .driver_info = (unsigned long)&wwan_info,
685}, {
686 /* ZTE (Vodafone) K3806-Z */
687 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
688 USB_CDC_SUBCLASS_ETHERNET,
689 USB_CDC_PROTO_NONE),
690 .driver_info = (unsigned long)&wwan_info,
691}, {
692 /* ZTE (Vodafone) K4510-Z */
693 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
694 USB_CDC_SUBCLASS_ETHERNET,
695 USB_CDC_PROTO_NONE),
696 .driver_info = (unsigned long)&wwan_info,
697}, {
698 /* ZTE (Vodafone) K3770-Z */
699 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
700 USB_CDC_SUBCLASS_ETHERNET,
701 USB_CDC_PROTO_NONE),
702 .driver_info = (unsigned long)&wwan_info,
703}, {
704 /* ZTE (Vodafone) K3772-Z */
705 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
706 USB_CDC_SUBCLASS_ETHERNET,
707 USB_CDC_PROTO_NONE),
708 .driver_info = (unsigned long)&wwan_info,
709}, {
710 /* Telit modules */
711 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
712 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
713 .driver_info = (kernel_ulong_t) &wwan_info,
714}, {
715 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
716 USB_CDC_PROTO_NONE),
717 .driver_info = (unsigned long) &cdc_info,
718}, {
719 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
720 USB_CDC_PROTO_NONE),
721 .driver_info = (unsigned long)&wwan_info,
722
723}, {
724 /* Various Huawei modems with a network port like the UMG1831 */
725 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
726 USB_CDC_SUBCLASS_ETHERNET, 255),
727 .driver_info = (unsigned long)&wwan_info,
728},
729 { }, /* END */
730};
731MODULE_DEVICE_TABLE(usb, products);
732
733static struct usb_driver cdc_driver = {
734 .name = "cdc_ether",
735 .id_table = products,
736 .probe = usbnet_probe,
737 .disconnect = usbnet_disconnect,
738 .suspend = usbnet_suspend,
739 .resume = usbnet_resume,
740 .reset_resume = usbnet_resume,
741 .supports_autosuspend = 1,
742 .disable_hub_initiated_lpm = 1,
743};
744
745module_usb_driver(cdc_driver);
746
747MODULE_AUTHOR("David Brownell");
748MODULE_DESCRIPTION("USB CDC Ethernet devices");
749MODULE_LICENSE("GPL");
1/*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21// #define DEBUG // error path messages, extra info
22// #define VERBOSE // more; success messages
23
24#include <linux/module.h>
25#include <linux/init.h>
26#include <linux/netdevice.h>
27#include <linux/etherdevice.h>
28#include <linux/ethtool.h>
29#include <linux/workqueue.h>
30#include <linux/mii.h>
31#include <linux/usb.h>
32#include <linux/usb/cdc.h>
33#include <linux/usb/usbnet.h>
34
35
36#if defined(CONFIG_USB_NET_RNDIS_HOST) || defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
37
38static int is_rndis(struct usb_interface_descriptor *desc)
39{
40 return (desc->bInterfaceClass == USB_CLASS_COMM &&
41 desc->bInterfaceSubClass == 2 &&
42 desc->bInterfaceProtocol == 0xff);
43}
44
45static int is_activesync(struct usb_interface_descriptor *desc)
46{
47 return (desc->bInterfaceClass == USB_CLASS_MISC &&
48 desc->bInterfaceSubClass == 1 &&
49 desc->bInterfaceProtocol == 1);
50}
51
52static int is_wireless_rndis(struct usb_interface_descriptor *desc)
53{
54 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
55 desc->bInterfaceSubClass == 1 &&
56 desc->bInterfaceProtocol == 3);
57}
58
59#else
60
61#define is_rndis(desc) 0
62#define is_activesync(desc) 0
63#define is_wireless_rndis(desc) 0
64
65#endif
66
67static const u8 mbm_guid[16] = {
68 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
69 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
70};
71
72/*
73 * probes control interface, claims data interface, collects the bulk
74 * endpoints, activates data interface (if needed), maybe sets MTU.
75 * all pure cdc, except for certain firmware workarounds, and knowing
76 * that rndis uses one different rule.
77 */
78int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
79{
80 u8 *buf = intf->cur_altsetting->extra;
81 int len = intf->cur_altsetting->extralen;
82 struct usb_interface_descriptor *d;
83 struct cdc_state *info = (void *) &dev->data;
84 int status;
85 int rndis;
86 struct usb_driver *driver = driver_of(intf);
87 struct usb_cdc_mdlm_desc *desc = NULL;
88 struct usb_cdc_mdlm_detail_desc *detail = NULL;
89
90 if (sizeof dev->data < sizeof *info)
91 return -EDOM;
92
93 /* expect strict spec conformance for the descriptors, but
94 * cope with firmware which stores them in the wrong place
95 */
96 if (len == 0 && dev->udev->actconfig->extralen) {
97 /* Motorola SB4100 (and others: Brad Hards says it's
98 * from a Broadcom design) put CDC descriptors here
99 */
100 buf = dev->udev->actconfig->extra;
101 len = dev->udev->actconfig->extralen;
102 dev_dbg(&intf->dev, "CDC descriptors on config\n");
103 }
104
105 /* Maybe CDC descriptors are after the endpoint? This bug has
106 * been seen on some 2Wire Inc RNDIS-ish products.
107 */
108 if (len == 0) {
109 struct usb_host_endpoint *hep;
110
111 hep = intf->cur_altsetting->endpoint;
112 if (hep) {
113 buf = hep->extra;
114 len = hep->extralen;
115 }
116 if (len)
117 dev_dbg(&intf->dev,
118 "CDC descriptors on endpoint\n");
119 }
120
121 /* this assumes that if there's a non-RNDIS vendor variant
122 * of cdc-acm, it'll fail RNDIS requests cleanly.
123 */
124 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
125 is_activesync(&intf->cur_altsetting->desc) ||
126 is_wireless_rndis(&intf->cur_altsetting->desc));
127
128 memset(info, 0, sizeof *info);
129 info->control = intf;
130 while (len > 3) {
131 if (buf [1] != USB_DT_CS_INTERFACE)
132 goto next_desc;
133
134 /* use bDescriptorSubType to identify the CDC descriptors.
135 * We expect devices with CDC header and union descriptors.
136 * For CDC Ethernet we need the ethernet descriptor.
137 * For RNDIS, ignore two (pointless) CDC modem descriptors
138 * in favor of a complicated OID-based RPC scheme doing what
139 * CDC Ethernet achieves with a simple descriptor.
140 */
141 switch (buf [2]) {
142 case USB_CDC_HEADER_TYPE:
143 if (info->header) {
144 dev_dbg(&intf->dev, "extra CDC header\n");
145 goto bad_desc;
146 }
147 info->header = (void *) buf;
148 if (info->header->bLength != sizeof *info->header) {
149 dev_dbg(&intf->dev, "CDC header len %u\n",
150 info->header->bLength);
151 goto bad_desc;
152 }
153 break;
154 case USB_CDC_ACM_TYPE:
155 /* paranoia: disambiguate a "real" vendor-specific
156 * modem interface from an RNDIS non-modem.
157 */
158 if (rndis) {
159 struct usb_cdc_acm_descriptor *acm;
160
161 acm = (void *) buf;
162 if (acm->bmCapabilities) {
163 dev_dbg(&intf->dev,
164 "ACM capabilities %02x, "
165 "not really RNDIS?\n",
166 acm->bmCapabilities);
167 goto bad_desc;
168 }
169 }
170 break;
171 case USB_CDC_UNION_TYPE:
172 if (info->u) {
173 dev_dbg(&intf->dev, "extra CDC union\n");
174 goto bad_desc;
175 }
176 info->u = (void *) buf;
177 if (info->u->bLength != sizeof *info->u) {
178 dev_dbg(&intf->dev, "CDC union len %u\n",
179 info->u->bLength);
180 goto bad_desc;
181 }
182
183 /* we need a master/control interface (what we're
184 * probed with) and a slave/data interface; union
185 * descriptors sort this all out.
186 */
187 info->control = usb_ifnum_to_if(dev->udev,
188 info->u->bMasterInterface0);
189 info->data = usb_ifnum_to_if(dev->udev,
190 info->u->bSlaveInterface0);
191 if (!info->control || !info->data) {
192 dev_dbg(&intf->dev,
193 "master #%u/%p slave #%u/%p\n",
194 info->u->bMasterInterface0,
195 info->control,
196 info->u->bSlaveInterface0,
197 info->data);
198 goto bad_desc;
199 }
200 if (info->control != intf) {
201 dev_dbg(&intf->dev, "bogus CDC Union\n");
202 /* Ambit USB Cable Modem (and maybe others)
203 * interchanges master and slave interface.
204 */
205 if (info->data == intf) {
206 info->data = info->control;
207 info->control = intf;
208 } else
209 goto bad_desc;
210 }
211
212 /* a data interface altsetting does the real i/o */
213 d = &info->data->cur_altsetting->desc;
214 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
215 dev_dbg(&intf->dev, "slave class %u\n",
216 d->bInterfaceClass);
217 goto bad_desc;
218 }
219 break;
220 case USB_CDC_ETHERNET_TYPE:
221 if (info->ether) {
222 dev_dbg(&intf->dev, "extra CDC ether\n");
223 goto bad_desc;
224 }
225 info->ether = (void *) buf;
226 if (info->ether->bLength != sizeof *info->ether) {
227 dev_dbg(&intf->dev, "CDC ether len %u\n",
228 info->ether->bLength);
229 goto bad_desc;
230 }
231 dev->hard_mtu = le16_to_cpu(
232 info->ether->wMaxSegmentSize);
233 /* because of Zaurus, we may be ignoring the host
234 * side link address we were given.
235 */
236 break;
237 case USB_CDC_MDLM_TYPE:
238 if (desc) {
239 dev_dbg(&intf->dev, "extra MDLM descriptor\n");
240 goto bad_desc;
241 }
242
243 desc = (void *)buf;
244
245 if (desc->bLength != sizeof(*desc))
246 goto bad_desc;
247
248 if (memcmp(&desc->bGUID, mbm_guid, 16))
249 goto bad_desc;
250 break;
251 case USB_CDC_MDLM_DETAIL_TYPE:
252 if (detail) {
253 dev_dbg(&intf->dev, "extra MDLM detail descriptor\n");
254 goto bad_desc;
255 }
256
257 detail = (void *)buf;
258
259 if (detail->bGuidDescriptorType == 0) {
260 if (detail->bLength < (sizeof(*detail) + 1))
261 goto bad_desc;
262 } else
263 goto bad_desc;
264 break;
265 }
266next_desc:
267 len -= buf [0]; /* bLength */
268 buf += buf [0];
269 }
270
271 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
272 * CDC descriptors, so we'll hard-wire the interfaces and not check
273 * for descriptors.
274 */
275 if (rndis && !info->u) {
276 info->control = usb_ifnum_to_if(dev->udev, 0);
277 info->data = usb_ifnum_to_if(dev->udev, 1);
278 if (!info->control || !info->data) {
279 dev_dbg(&intf->dev,
280 "rndis: master #0/%p slave #1/%p\n",
281 info->control,
282 info->data);
283 goto bad_desc;
284 }
285
286 } else if (!info->header || !info->u || (!rndis && !info->ether)) {
287 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
288 info->header ? "" : "header ",
289 info->u ? "" : "union ",
290 info->ether ? "" : "ether ");
291 goto bad_desc;
292 }
293
294 /* claim data interface and set it up ... with side effects.
295 * network traffic can't flow until an altsetting is enabled.
296 */
297 status = usb_driver_claim_interface(driver, info->data, dev);
298 if (status < 0)
299 return status;
300 status = usbnet_get_endpoints(dev, info->data);
301 if (status < 0) {
302 /* ensure immediate exit from usbnet_disconnect */
303 usb_set_intfdata(info->data, NULL);
304 usb_driver_release_interface(driver, info->data);
305 return status;
306 }
307
308 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
309 dev->status = NULL;
310 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
311 struct usb_endpoint_descriptor *desc;
312
313 dev->status = &info->control->cur_altsetting->endpoint [0];
314 desc = &dev->status->desc;
315 if (!usb_endpoint_is_int_in(desc) ||
316 (le16_to_cpu(desc->wMaxPacketSize)
317 < sizeof(struct usb_cdc_notification)) ||
318 !desc->bInterval) {
319 dev_dbg(&intf->dev, "bad notification endpoint\n");
320 dev->status = NULL;
321 }
322 }
323 if (rndis && !dev->status) {
324 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
325 usb_set_intfdata(info->data, NULL);
326 usb_driver_release_interface(driver, info->data);
327 return -ENODEV;
328 }
329 return 0;
330
331bad_desc:
332 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
333 return -ENODEV;
334}
335EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
336
337void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
338{
339 struct cdc_state *info = (void *) &dev->data;
340 struct usb_driver *driver = driver_of(intf);
341
342 /* disconnect master --> disconnect slave */
343 if (intf == info->control && info->data) {
344 /* ensure immediate exit from usbnet_disconnect */
345 usb_set_intfdata(info->data, NULL);
346 usb_driver_release_interface(driver, info->data);
347 info->data = NULL;
348 }
349
350 /* and vice versa (just in case) */
351 else if (intf == info->data && info->control) {
352 /* ensure immediate exit from usbnet_disconnect */
353 usb_set_intfdata(info->control, NULL);
354 usb_driver_release_interface(driver, info->control);
355 info->control = NULL;
356 }
357}
358EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
359
360/*-------------------------------------------------------------------------
361 *
362 * Communications Device Class, Ethernet Control model
363 *
364 * Takes two interfaces. The DATA interface is inactive till an altsetting
365 * is selected. Configuration data includes class descriptors. There's
366 * an optional status endpoint on the control interface.
367 *
368 * This should interop with whatever the 2.4 "CDCEther.c" driver
369 * (by Brad Hards) talked with, with more functionality.
370 *
371 *-------------------------------------------------------------------------*/
372
373static void dumpspeed(struct usbnet *dev, __le32 *speeds)
374{
375 netif_info(dev, timer, dev->net,
376 "link speeds: %u kbps up, %u kbps down\n",
377 __le32_to_cpu(speeds[0]) / 1000,
378 __le32_to_cpu(speeds[1]) / 1000);
379}
380
381void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
382{
383 struct usb_cdc_notification *event;
384
385 if (urb->actual_length < sizeof *event)
386 return;
387
388 /* SPEED_CHANGE can get split into two 8-byte packets */
389 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
390 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
391 return;
392 }
393
394 event = urb->transfer_buffer;
395 switch (event->bNotificationType) {
396 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
397 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
398 event->wValue ? "on" : "off");
399 if (event->wValue)
400 netif_carrier_on(dev->net);
401 else
402 netif_carrier_off(dev->net);
403 break;
404 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
405 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
406 urb->actual_length);
407 if (urb->actual_length != (sizeof *event + 8))
408 set_bit(EVENT_STS_SPLIT, &dev->flags);
409 else
410 dumpspeed(dev, (__le32 *) &event[1]);
411 break;
412 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
413 * but there are no standard formats for the response data.
414 */
415 default:
416 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
417 event->bNotificationType);
418 break;
419 }
420}
421EXPORT_SYMBOL_GPL(usbnet_cdc_status);
422
423int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
424{
425 int status;
426 struct cdc_state *info = (void *) &dev->data;
427
428 status = usbnet_generic_cdc_bind(dev, intf);
429 if (status < 0)
430 return status;
431
432 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
433 if (status < 0) {
434 usb_set_intfdata(info->data, NULL);
435 usb_driver_release_interface(driver_of(intf), info->data);
436 return status;
437 }
438
439 /* FIXME cdc-ether has some multicast code too, though it complains
440 * in routine cases. info->ether describes the multicast support.
441 * Implement that here, manipulating the cdc filter as needed.
442 */
443 return 0;
444}
445EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
446
447static int cdc_manage_power(struct usbnet *dev, int on)
448{
449 dev->intf->needs_remote_wakeup = on;
450 return 0;
451}
452
453static const struct driver_info cdc_info = {
454 .description = "CDC Ethernet Device",
455 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
456 // .check_connect = cdc_check_connect,
457 .bind = usbnet_cdc_bind,
458 .unbind = usbnet_cdc_unbind,
459 .status = usbnet_cdc_status,
460 .manage_power = cdc_manage_power,
461};
462
463static const struct driver_info wwan_info = {
464 .description = "Mobile Broadband Network Device",
465 .flags = FLAG_WWAN,
466 .bind = usbnet_cdc_bind,
467 .unbind = usbnet_cdc_unbind,
468 .status = usbnet_cdc_status,
469 .manage_power = cdc_manage_power,
470};
471
472/*-------------------------------------------------------------------------*/
473
474#define HUAWEI_VENDOR_ID 0x12D1
475
476static const struct usb_device_id products [] = {
477/*
478 * BLACKLIST !!
479 *
480 * First blacklist any products that are egregiously nonconformant
481 * with the CDC Ethernet specs. Minor braindamage we cope with; when
482 * they're not even trying, needing a separate driver is only the first
483 * of the differences to show up.
484 */
485
486#define ZAURUS_MASTER_INTERFACE \
487 .bInterfaceClass = USB_CLASS_COMM, \
488 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
489 .bInterfaceProtocol = USB_CDC_PROTO_NONE
490
491/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
492 * wire-incompatible with true CDC Ethernet implementations.
493 * (And, it seems, needlessly so...)
494 */
495{
496 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
497 | USB_DEVICE_ID_MATCH_DEVICE,
498 .idVendor = 0x04DD,
499 .idProduct = 0x8004,
500 ZAURUS_MASTER_INTERFACE,
501 .driver_info = 0,
502},
503
504/* PXA-25x based Sharp Zaurii. Note that it seems some of these
505 * (later models especially) may have shipped only with firmware
506 * advertising false "CDC MDLM" compatibility ... but we're not
507 * clear which models did that, so for now let's assume the worst.
508 */
509{
510 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
511 | USB_DEVICE_ID_MATCH_DEVICE,
512 .idVendor = 0x04DD,
513 .idProduct = 0x8005, /* A-300 */
514 ZAURUS_MASTER_INTERFACE,
515 .driver_info = 0,
516}, {
517 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
518 | USB_DEVICE_ID_MATCH_DEVICE,
519 .idVendor = 0x04DD,
520 .idProduct = 0x8006, /* B-500/SL-5600 */
521 ZAURUS_MASTER_INTERFACE,
522 .driver_info = 0,
523}, {
524 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
525 | USB_DEVICE_ID_MATCH_DEVICE,
526 .idVendor = 0x04DD,
527 .idProduct = 0x8007, /* C-700 */
528 ZAURUS_MASTER_INTERFACE,
529 .driver_info = 0,
530}, {
531 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
532 | USB_DEVICE_ID_MATCH_DEVICE,
533 .idVendor = 0x04DD,
534 .idProduct = 0x9031, /* C-750 C-760 */
535 ZAURUS_MASTER_INTERFACE,
536 .driver_info = 0,
537}, {
538 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
539 | USB_DEVICE_ID_MATCH_DEVICE,
540 .idVendor = 0x04DD,
541 .idProduct = 0x9032, /* SL-6000 */
542 ZAURUS_MASTER_INTERFACE,
543 .driver_info = 0,
544}, {
545 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
546 | USB_DEVICE_ID_MATCH_DEVICE,
547 .idVendor = 0x04DD,
548 /* reported with some C860 units */
549 .idProduct = 0x9050, /* C-860 */
550 ZAURUS_MASTER_INTERFACE,
551 .driver_info = 0,
552},
553
554/* Olympus has some models with a Zaurus-compatible option.
555 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
556 */
557{
558 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
559 | USB_DEVICE_ID_MATCH_DEVICE,
560 .idVendor = 0x07B4,
561 .idProduct = 0x0F02, /* R-1000 */
562 ZAURUS_MASTER_INTERFACE,
563 .driver_info = 0,
564},
565
566/* LG Electronics VL600 wants additional headers on every frame */
567{
568 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
569 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
570 .driver_info = (unsigned long)&wwan_info,
571},
572
573/*
574 * WHITELIST!!!
575 *
576 * CDC Ether uses two interfaces, not necessarily consecutive.
577 * We match the main interface, ignoring the optional device
578 * class so we could handle devices that aren't exclusively
579 * CDC ether.
580 *
581 * NOTE: this match must come AFTER entries blacklisting devices
582 * because of bugs/quirks in a given product (like Zaurus, above).
583 */
584{
585 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
586 USB_CDC_PROTO_NONE),
587 .driver_info = (unsigned long) &cdc_info,
588}, {
589 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
590 USB_CDC_PROTO_NONE),
591 .driver_info = (unsigned long)&wwan_info,
592
593}, {
594 /* Various Huawei modems with a network port like the UMG1831 */
595 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
596 | USB_DEVICE_ID_MATCH_INT_INFO,
597 .idVendor = HUAWEI_VENDOR_ID,
598 .bInterfaceClass = USB_CLASS_COMM,
599 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
600 .bInterfaceProtocol = 255,
601 .driver_info = (unsigned long)&wwan_info,
602},
603 { }, // END
604};
605MODULE_DEVICE_TABLE(usb, products);
606
607static struct usb_driver cdc_driver = {
608 .name = "cdc_ether",
609 .id_table = products,
610 .probe = usbnet_probe,
611 .disconnect = usbnet_disconnect,
612 .suspend = usbnet_suspend,
613 .resume = usbnet_resume,
614 .reset_resume = usbnet_resume,
615 .supports_autosuspend = 1,
616};
617
618
619static int __init cdc_init(void)
620{
621 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
622 < sizeof(struct cdc_state)));
623
624 return usb_register(&cdc_driver);
625}
626module_init(cdc_init);
627
628static void __exit cdc_exit(void)
629{
630 usb_deregister(&cdc_driver);
631}
632module_exit(cdc_exit);
633
634MODULE_AUTHOR("David Brownell");
635MODULE_DESCRIPTION("USB CDC Ethernet devices");
636MODULE_LICENSE("GPL");