Loading...
1/*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 */
19
20// #define DEBUG // error path messages, extra info
21// #define VERBOSE // more; success messages
22
23#include <linux/module.h>
24#include <linux/netdevice.h>
25#include <linux/etherdevice.h>
26#include <linux/ethtool.h>
27#include <linux/workqueue.h>
28#include <linux/mii.h>
29#include <linux/usb.h>
30#include <linux/usb/cdc.h>
31#include <linux/usb/usbnet.h>
32
33
34#if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
35
36static int is_rndis(struct usb_interface_descriptor *desc)
37{
38 return (desc->bInterfaceClass == USB_CLASS_COMM &&
39 desc->bInterfaceSubClass == 2 &&
40 desc->bInterfaceProtocol == 0xff);
41}
42
43static int is_activesync(struct usb_interface_descriptor *desc)
44{
45 return (desc->bInterfaceClass == USB_CLASS_MISC &&
46 desc->bInterfaceSubClass == 1 &&
47 desc->bInterfaceProtocol == 1);
48}
49
50static int is_wireless_rndis(struct usb_interface_descriptor *desc)
51{
52 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53 desc->bInterfaceSubClass == 1 &&
54 desc->bInterfaceProtocol == 3);
55}
56
57#else
58
59#define is_rndis(desc) 0
60#define is_activesync(desc) 0
61#define is_wireless_rndis(desc) 0
62
63#endif
64
65static const u8 mbm_guid[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
68};
69
70/* probes control interface, claims data interface, collects the bulk
71 * endpoints, activates data interface (if needed), maybe sets MTU.
72 * all pure cdc, except for certain firmware workarounds, and knowing
73 * that rndis uses one different rule.
74 */
75int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
76{
77 u8 *buf = intf->cur_altsetting->extra;
78 int len = intf->cur_altsetting->extralen;
79 struct usb_interface_descriptor *d;
80 struct cdc_state *info = (void *) &dev->data;
81 int status;
82 int rndis;
83 bool android_rndis_quirk = false;
84 struct usb_driver *driver = driver_of(intf);
85 struct usb_cdc_mdlm_desc *desc = NULL;
86 struct usb_cdc_mdlm_detail_desc *detail = NULL;
87
88 if (sizeof(dev->data) < sizeof(*info))
89 return -EDOM;
90
91 /* expect strict spec conformance for the descriptors, but
92 * cope with firmware which stores them in the wrong place
93 */
94 if (len == 0 && dev->udev->actconfig->extralen) {
95 /* Motorola SB4100 (and others: Brad Hards says it's
96 * from a Broadcom design) put CDC descriptors here
97 */
98 buf = dev->udev->actconfig->extra;
99 len = dev->udev->actconfig->extralen;
100 dev_dbg(&intf->dev, "CDC descriptors on config\n");
101 }
102
103 /* Maybe CDC descriptors are after the endpoint? This bug has
104 * been seen on some 2Wire Inc RNDIS-ish products.
105 */
106 if (len == 0) {
107 struct usb_host_endpoint *hep;
108
109 hep = intf->cur_altsetting->endpoint;
110 if (hep) {
111 buf = hep->extra;
112 len = hep->extralen;
113 }
114 if (len)
115 dev_dbg(&intf->dev,
116 "CDC descriptors on endpoint\n");
117 }
118
119 /* this assumes that if there's a non-RNDIS vendor variant
120 * of cdc-acm, it'll fail RNDIS requests cleanly.
121 */
122 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
123 is_activesync(&intf->cur_altsetting->desc) ||
124 is_wireless_rndis(&intf->cur_altsetting->desc));
125
126 memset(info, 0, sizeof(*info));
127 info->control = intf;
128 while (len > 3) {
129 if (buf[1] != USB_DT_CS_INTERFACE)
130 goto next_desc;
131
132 /* use bDescriptorSubType to identify the CDC descriptors.
133 * We expect devices with CDC header and union descriptors.
134 * For CDC Ethernet we need the ethernet descriptor.
135 * For RNDIS, ignore two (pointless) CDC modem descriptors
136 * in favor of a complicated OID-based RPC scheme doing what
137 * CDC Ethernet achieves with a simple descriptor.
138 */
139 switch (buf[2]) {
140 case USB_CDC_HEADER_TYPE:
141 if (info->header) {
142 dev_dbg(&intf->dev, "extra CDC header\n");
143 goto bad_desc;
144 }
145 info->header = (void *) buf;
146 if (info->header->bLength != sizeof(*info->header)) {
147 dev_dbg(&intf->dev, "CDC header len %u\n",
148 info->header->bLength);
149 goto bad_desc;
150 }
151 break;
152 case USB_CDC_ACM_TYPE:
153 /* paranoia: disambiguate a "real" vendor-specific
154 * modem interface from an RNDIS non-modem.
155 */
156 if (rndis) {
157 struct usb_cdc_acm_descriptor *acm;
158
159 acm = (void *) buf;
160 if (acm->bmCapabilities) {
161 dev_dbg(&intf->dev,
162 "ACM capabilities %02x, "
163 "not really RNDIS?\n",
164 acm->bmCapabilities);
165 goto bad_desc;
166 }
167 }
168 break;
169 case USB_CDC_UNION_TYPE:
170 if (info->u) {
171 dev_dbg(&intf->dev, "extra CDC union\n");
172 goto bad_desc;
173 }
174 info->u = (void *) buf;
175 if (info->u->bLength != sizeof(*info->u)) {
176 dev_dbg(&intf->dev, "CDC union len %u\n",
177 info->u->bLength);
178 goto bad_desc;
179 }
180
181 /* we need a master/control interface (what we're
182 * probed with) and a slave/data interface; union
183 * descriptors sort this all out.
184 */
185 info->control = usb_ifnum_to_if(dev->udev,
186 info->u->bMasterInterface0);
187 info->data = usb_ifnum_to_if(dev->udev,
188 info->u->bSlaveInterface0);
189 if (!info->control || !info->data) {
190 dev_dbg(&intf->dev,
191 "master #%u/%p slave #%u/%p\n",
192 info->u->bMasterInterface0,
193 info->control,
194 info->u->bSlaveInterface0,
195 info->data);
196 /* fall back to hard-wiring for RNDIS */
197 if (rndis) {
198 android_rndis_quirk = true;
199 goto next_desc;
200 }
201 goto bad_desc;
202 }
203 if (info->control != intf) {
204 dev_dbg(&intf->dev, "bogus CDC Union\n");
205 /* Ambit USB Cable Modem (and maybe others)
206 * interchanges master and slave interface.
207 */
208 if (info->data == intf) {
209 info->data = info->control;
210 info->control = intf;
211 } else
212 goto bad_desc;
213 }
214
215 /* some devices merge these - skip class check */
216 if (info->control == info->data)
217 goto next_desc;
218
219 /* a data interface altsetting does the real i/o */
220 d = &info->data->cur_altsetting->desc;
221 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
222 dev_dbg(&intf->dev, "slave class %u\n",
223 d->bInterfaceClass);
224 goto bad_desc;
225 }
226 break;
227 case USB_CDC_ETHERNET_TYPE:
228 if (info->ether) {
229 dev_dbg(&intf->dev, "extra CDC ether\n");
230 goto bad_desc;
231 }
232 info->ether = (void *) buf;
233 if (info->ether->bLength != sizeof(*info->ether)) {
234 dev_dbg(&intf->dev, "CDC ether len %u\n",
235 info->ether->bLength);
236 goto bad_desc;
237 }
238 dev->hard_mtu = le16_to_cpu(
239 info->ether->wMaxSegmentSize);
240 /* because of Zaurus, we may be ignoring the host
241 * side link address we were given.
242 */
243 break;
244 case USB_CDC_MDLM_TYPE:
245 if (desc) {
246 dev_dbg(&intf->dev, "extra MDLM descriptor\n");
247 goto bad_desc;
248 }
249
250 desc = (void *)buf;
251
252 if (desc->bLength != sizeof(*desc))
253 goto bad_desc;
254
255 if (memcmp(&desc->bGUID, mbm_guid, 16))
256 goto bad_desc;
257 break;
258 case USB_CDC_MDLM_DETAIL_TYPE:
259 if (detail) {
260 dev_dbg(&intf->dev, "extra MDLM detail descriptor\n");
261 goto bad_desc;
262 }
263
264 detail = (void *)buf;
265
266 if (detail->bGuidDescriptorType == 0) {
267 if (detail->bLength < (sizeof(*detail) + 1))
268 goto bad_desc;
269 } else
270 goto bad_desc;
271 break;
272 }
273next_desc:
274 len -= buf[0]; /* bLength */
275 buf += buf[0];
276 }
277
278 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
279 * CDC descriptors, so we'll hard-wire the interfaces and not check
280 * for descriptors.
281 *
282 * Some Android RNDIS devices have a CDC Union descriptor pointing
283 * to non-existing interfaces. Ignore that and attempt the same
284 * hard-wired 0 and 1 interfaces.
285 */
286 if (rndis && (!info->u || android_rndis_quirk)) {
287 info->control = usb_ifnum_to_if(dev->udev, 0);
288 info->data = usb_ifnum_to_if(dev->udev, 1);
289 if (!info->control || !info->data || info->control != intf) {
290 dev_dbg(&intf->dev,
291 "rndis: master #0/%p slave #1/%p\n",
292 info->control,
293 info->data);
294 goto bad_desc;
295 }
296
297 } else if (!info->header || !info->u || (!rndis && !info->ether)) {
298 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
299 info->header ? "" : "header ",
300 info->u ? "" : "union ",
301 info->ether ? "" : "ether ");
302 goto bad_desc;
303 }
304
305 /* claim data interface and set it up ... with side effects.
306 * network traffic can't flow until an altsetting is enabled.
307 */
308 if (info->data != info->control) {
309 status = usb_driver_claim_interface(driver, info->data, dev);
310 if (status < 0)
311 return status;
312 }
313 status = usbnet_get_endpoints(dev, info->data);
314 if (status < 0) {
315 /* ensure immediate exit from usbnet_disconnect */
316 usb_set_intfdata(info->data, NULL);
317 if (info->data != info->control)
318 usb_driver_release_interface(driver, info->data);
319 return status;
320 }
321
322 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
323 if (info->data != info->control)
324 dev->status = NULL;
325 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
326 struct usb_endpoint_descriptor *desc;
327
328 dev->status = &info->control->cur_altsetting->endpoint [0];
329 desc = &dev->status->desc;
330 if (!usb_endpoint_is_int_in(desc) ||
331 (le16_to_cpu(desc->wMaxPacketSize)
332 < sizeof(struct usb_cdc_notification)) ||
333 !desc->bInterval) {
334 dev_dbg(&intf->dev, "bad notification endpoint\n");
335 dev->status = NULL;
336 }
337 }
338 if (rndis && !dev->status) {
339 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
340 usb_set_intfdata(info->data, NULL);
341 usb_driver_release_interface(driver, info->data);
342 return -ENODEV;
343 }
344 return 0;
345
346bad_desc:
347 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
348 return -ENODEV;
349}
350EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
351
352void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
353{
354 struct cdc_state *info = (void *) &dev->data;
355 struct usb_driver *driver = driver_of(intf);
356
357 /* combined interface - nothing to do */
358 if (info->data == info->control)
359 return;
360
361 /* disconnect master --> disconnect slave */
362 if (intf == info->control && info->data) {
363 /* ensure immediate exit from usbnet_disconnect */
364 usb_set_intfdata(info->data, NULL);
365 usb_driver_release_interface(driver, info->data);
366 info->data = NULL;
367 }
368
369 /* and vice versa (just in case) */
370 else if (intf == info->data && info->control) {
371 /* ensure immediate exit from usbnet_disconnect */
372 usb_set_intfdata(info->control, NULL);
373 usb_driver_release_interface(driver, info->control);
374 info->control = NULL;
375 }
376}
377EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
378
379/* Communications Device Class, Ethernet Control model
380 *
381 * Takes two interfaces. The DATA interface is inactive till an altsetting
382 * is selected. Configuration data includes class descriptors. There's
383 * an optional status endpoint on the control interface.
384 *
385 * This should interop with whatever the 2.4 "CDCEther.c" driver
386 * (by Brad Hards) talked with, with more functionality.
387 */
388
389static void dumpspeed(struct usbnet *dev, __le32 *speeds)
390{
391 netif_info(dev, timer, dev->net,
392 "link speeds: %u kbps up, %u kbps down\n",
393 __le32_to_cpu(speeds[0]) / 1000,
394 __le32_to_cpu(speeds[1]) / 1000);
395}
396
397void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
398{
399 struct usb_cdc_notification *event;
400
401 if (urb->actual_length < sizeof(*event))
402 return;
403
404 /* SPEED_CHANGE can get split into two 8-byte packets */
405 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
406 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
407 return;
408 }
409
410 event = urb->transfer_buffer;
411 switch (event->bNotificationType) {
412 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
413 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
414 event->wValue ? "on" : "off");
415 usbnet_link_change(dev, !!event->wValue, 0);
416 break;
417 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
418 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
419 urb->actual_length);
420 if (urb->actual_length != (sizeof(*event) + 8))
421 set_bit(EVENT_STS_SPLIT, &dev->flags);
422 else
423 dumpspeed(dev, (__le32 *) &event[1]);
424 break;
425 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
426 * but there are no standard formats for the response data.
427 */
428 default:
429 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
430 event->bNotificationType);
431 break;
432 }
433}
434EXPORT_SYMBOL_GPL(usbnet_cdc_status);
435
436int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
437{
438 int status;
439 struct cdc_state *info = (void *) &dev->data;
440
441 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
442 < sizeof(struct cdc_state)));
443
444 status = usbnet_generic_cdc_bind(dev, intf);
445 if (status < 0)
446 return status;
447
448 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
449 if (status < 0) {
450 usb_set_intfdata(info->data, NULL);
451 usb_driver_release_interface(driver_of(intf), info->data);
452 return status;
453 }
454
455 /* FIXME cdc-ether has some multicast code too, though it complains
456 * in routine cases. info->ether describes the multicast support.
457 * Implement that here, manipulating the cdc filter as needed.
458 */
459 return 0;
460}
461EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
462
463static const struct driver_info cdc_info = {
464 .description = "CDC Ethernet Device",
465 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
466 .bind = usbnet_cdc_bind,
467 .unbind = usbnet_cdc_unbind,
468 .status = usbnet_cdc_status,
469 .manage_power = usbnet_manage_power,
470};
471
472static const struct driver_info wwan_info = {
473 .description = "Mobile Broadband Network Device",
474 .flags = FLAG_WWAN,
475 .bind = usbnet_cdc_bind,
476 .unbind = usbnet_cdc_unbind,
477 .status = usbnet_cdc_status,
478 .manage_power = usbnet_manage_power,
479};
480
481/*-------------------------------------------------------------------------*/
482
483#define HUAWEI_VENDOR_ID 0x12D1
484#define NOVATEL_VENDOR_ID 0x1410
485#define ZTE_VENDOR_ID 0x19D2
486#define DELL_VENDOR_ID 0x413C
487#define REALTEK_VENDOR_ID 0x0bda
488#define SAMSUNG_VENDOR_ID 0x04e8
489
490static const struct usb_device_id products[] = {
491/* BLACKLIST !!
492 *
493 * First blacklist any products that are egregiously nonconformant
494 * with the CDC Ethernet specs. Minor braindamage we cope with; when
495 * they're not even trying, needing a separate driver is only the first
496 * of the differences to show up.
497 */
498
499#define ZAURUS_MASTER_INTERFACE \
500 .bInterfaceClass = USB_CLASS_COMM, \
501 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
502 .bInterfaceProtocol = USB_CDC_PROTO_NONE
503
504/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
505 * wire-incompatible with true CDC Ethernet implementations.
506 * (And, it seems, needlessly so...)
507 */
508{
509 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
510 | USB_DEVICE_ID_MATCH_DEVICE,
511 .idVendor = 0x04DD,
512 .idProduct = 0x8004,
513 ZAURUS_MASTER_INTERFACE,
514 .driver_info = 0,
515},
516
517/* PXA-25x based Sharp Zaurii. Note that it seems some of these
518 * (later models especially) may have shipped only with firmware
519 * advertising false "CDC MDLM" compatibility ... but we're not
520 * clear which models did that, so for now let's assume the worst.
521 */
522{
523 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
524 | USB_DEVICE_ID_MATCH_DEVICE,
525 .idVendor = 0x04DD,
526 .idProduct = 0x8005, /* A-300 */
527 ZAURUS_MASTER_INTERFACE,
528 .driver_info = 0,
529}, {
530 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
531 | USB_DEVICE_ID_MATCH_DEVICE,
532 .idVendor = 0x04DD,
533 .idProduct = 0x8006, /* B-500/SL-5600 */
534 ZAURUS_MASTER_INTERFACE,
535 .driver_info = 0,
536}, {
537 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
538 | USB_DEVICE_ID_MATCH_DEVICE,
539 .idVendor = 0x04DD,
540 .idProduct = 0x8007, /* C-700 */
541 ZAURUS_MASTER_INTERFACE,
542 .driver_info = 0,
543}, {
544 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
545 | USB_DEVICE_ID_MATCH_DEVICE,
546 .idVendor = 0x04DD,
547 .idProduct = 0x9031, /* C-750 C-760 */
548 ZAURUS_MASTER_INTERFACE,
549 .driver_info = 0,
550}, {
551 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
552 | USB_DEVICE_ID_MATCH_DEVICE,
553 .idVendor = 0x04DD,
554 .idProduct = 0x9032, /* SL-6000 */
555 ZAURUS_MASTER_INTERFACE,
556 .driver_info = 0,
557}, {
558 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
559 | USB_DEVICE_ID_MATCH_DEVICE,
560 .idVendor = 0x04DD,
561 /* reported with some C860 units */
562 .idProduct = 0x9050, /* C-860 */
563 ZAURUS_MASTER_INTERFACE,
564 .driver_info = 0,
565},
566
567/* Olympus has some models with a Zaurus-compatible option.
568 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
569 */
570{
571 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
572 | USB_DEVICE_ID_MATCH_DEVICE,
573 .idVendor = 0x07B4,
574 .idProduct = 0x0F02, /* R-1000 */
575 ZAURUS_MASTER_INTERFACE,
576 .driver_info = 0,
577},
578
579/* LG Electronics VL600 wants additional headers on every frame */
580{
581 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
582 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
583 .driver_info = 0,
584},
585
586/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
587{
588 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
589 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
590 .driver_info = 0,
591},
592
593/* Novatel USB551L and MC551 - handled by qmi_wwan */
594{
595 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
596 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
597 .driver_info = 0,
598},
599
600/* Novatel E362 - handled by qmi_wwan */
601{
602 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
603 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
604 .driver_info = 0,
605},
606
607/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
608{
609 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
610 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
611 .driver_info = 0,
612},
613
614/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
615{
616 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
617 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
618 .driver_info = 0,
619},
620
621/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
622{
623 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
624 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
625 .driver_info = 0,
626},
627
628/* Novatel Expedite E371 - handled by qmi_wwan */
629{
630 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
631 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
632 .driver_info = 0,
633},
634
635/* AnyDATA ADU960S - handled by qmi_wwan */
636{
637 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
638 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
639 .driver_info = 0,
640},
641
642/* Huawei E1820 - handled by qmi_wwan */
643{
644 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
645 .driver_info = 0,
646},
647
648/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
649{
650 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
651 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
652 .driver_info = 0,
653},
654
655/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
656{
657 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
658 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
659 .driver_info = 0,
660},
661
662/* Samsung USB Ethernet Adapters */
663{
664 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
665 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
666 .driver_info = 0,
667},
668
669/* WHITELIST!!!
670 *
671 * CDC Ether uses two interfaces, not necessarily consecutive.
672 * We match the main interface, ignoring the optional device
673 * class so we could handle devices that aren't exclusively
674 * CDC ether.
675 *
676 * NOTE: this match must come AFTER entries blacklisting devices
677 * because of bugs/quirks in a given product (like Zaurus, above).
678 */
679{
680 /* ZTE (Vodafone) K3805-Z */
681 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
682 USB_CDC_SUBCLASS_ETHERNET,
683 USB_CDC_PROTO_NONE),
684 .driver_info = (unsigned long)&wwan_info,
685}, {
686 /* ZTE (Vodafone) K3806-Z */
687 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
688 USB_CDC_SUBCLASS_ETHERNET,
689 USB_CDC_PROTO_NONE),
690 .driver_info = (unsigned long)&wwan_info,
691}, {
692 /* ZTE (Vodafone) K4510-Z */
693 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
694 USB_CDC_SUBCLASS_ETHERNET,
695 USB_CDC_PROTO_NONE),
696 .driver_info = (unsigned long)&wwan_info,
697}, {
698 /* ZTE (Vodafone) K3770-Z */
699 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
700 USB_CDC_SUBCLASS_ETHERNET,
701 USB_CDC_PROTO_NONE),
702 .driver_info = (unsigned long)&wwan_info,
703}, {
704 /* ZTE (Vodafone) K3772-Z */
705 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
706 USB_CDC_SUBCLASS_ETHERNET,
707 USB_CDC_PROTO_NONE),
708 .driver_info = (unsigned long)&wwan_info,
709}, {
710 /* Telit modules */
711 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
712 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
713 .driver_info = (kernel_ulong_t) &wwan_info,
714}, {
715 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
716 USB_CDC_PROTO_NONE),
717 .driver_info = (unsigned long) &cdc_info,
718}, {
719 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
720 USB_CDC_PROTO_NONE),
721 .driver_info = (unsigned long)&wwan_info,
722
723}, {
724 /* Various Huawei modems with a network port like the UMG1831 */
725 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
726 USB_CDC_SUBCLASS_ETHERNET, 255),
727 .driver_info = (unsigned long)&wwan_info,
728},
729 { }, /* END */
730};
731MODULE_DEVICE_TABLE(usb, products);
732
733static struct usb_driver cdc_driver = {
734 .name = "cdc_ether",
735 .id_table = products,
736 .probe = usbnet_probe,
737 .disconnect = usbnet_disconnect,
738 .suspend = usbnet_suspend,
739 .resume = usbnet_resume,
740 .reset_resume = usbnet_resume,
741 .supports_autosuspend = 1,
742 .disable_hub_initiated_lpm = 1,
743};
744
745module_usb_driver(cdc_driver);
746
747MODULE_AUTHOR("David Brownell");
748MODULE_DESCRIPTION("USB CDC Ethernet devices");
749MODULE_LICENSE("GPL");
1/*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21// #define DEBUG // error path messages, extra info
22// #define VERBOSE // more; success messages
23
24#include <linux/module.h>
25#include <linux/init.h>
26#include <linux/netdevice.h>
27#include <linux/etherdevice.h>
28#include <linux/ethtool.h>
29#include <linux/workqueue.h>
30#include <linux/mii.h>
31#include <linux/usb.h>
32#include <linux/usb/cdc.h>
33#include <linux/usb/usbnet.h>
34
35
36#if defined(CONFIG_USB_NET_RNDIS_HOST) || defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
37
38static int is_rndis(struct usb_interface_descriptor *desc)
39{
40 return (desc->bInterfaceClass == USB_CLASS_COMM &&
41 desc->bInterfaceSubClass == 2 &&
42 desc->bInterfaceProtocol == 0xff);
43}
44
45static int is_activesync(struct usb_interface_descriptor *desc)
46{
47 return (desc->bInterfaceClass == USB_CLASS_MISC &&
48 desc->bInterfaceSubClass == 1 &&
49 desc->bInterfaceProtocol == 1);
50}
51
52static int is_wireless_rndis(struct usb_interface_descriptor *desc)
53{
54 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
55 desc->bInterfaceSubClass == 1 &&
56 desc->bInterfaceProtocol == 3);
57}
58
59#else
60
61#define is_rndis(desc) 0
62#define is_activesync(desc) 0
63#define is_wireless_rndis(desc) 0
64
65#endif
66
67static const u8 mbm_guid[16] = {
68 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
69 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
70};
71
72/*
73 * probes control interface, claims data interface, collects the bulk
74 * endpoints, activates data interface (if needed), maybe sets MTU.
75 * all pure cdc, except for certain firmware workarounds, and knowing
76 * that rndis uses one different rule.
77 */
78int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
79{
80 u8 *buf = intf->cur_altsetting->extra;
81 int len = intf->cur_altsetting->extralen;
82 struct usb_interface_descriptor *d;
83 struct cdc_state *info = (void *) &dev->data;
84 int status;
85 int rndis;
86 bool android_rndis_quirk = false;
87 struct usb_driver *driver = driver_of(intf);
88 struct usb_cdc_mdlm_desc *desc = NULL;
89 struct usb_cdc_mdlm_detail_desc *detail = NULL;
90
91 if (sizeof dev->data < sizeof *info)
92 return -EDOM;
93
94 /* expect strict spec conformance for the descriptors, but
95 * cope with firmware which stores them in the wrong place
96 */
97 if (len == 0 && dev->udev->actconfig->extralen) {
98 /* Motorola SB4100 (and others: Brad Hards says it's
99 * from a Broadcom design) put CDC descriptors here
100 */
101 buf = dev->udev->actconfig->extra;
102 len = dev->udev->actconfig->extralen;
103 dev_dbg(&intf->dev, "CDC descriptors on config\n");
104 }
105
106 /* Maybe CDC descriptors are after the endpoint? This bug has
107 * been seen on some 2Wire Inc RNDIS-ish products.
108 */
109 if (len == 0) {
110 struct usb_host_endpoint *hep;
111
112 hep = intf->cur_altsetting->endpoint;
113 if (hep) {
114 buf = hep->extra;
115 len = hep->extralen;
116 }
117 if (len)
118 dev_dbg(&intf->dev,
119 "CDC descriptors on endpoint\n");
120 }
121
122 /* this assumes that if there's a non-RNDIS vendor variant
123 * of cdc-acm, it'll fail RNDIS requests cleanly.
124 */
125 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
126 is_activesync(&intf->cur_altsetting->desc) ||
127 is_wireless_rndis(&intf->cur_altsetting->desc));
128
129 memset(info, 0, sizeof *info);
130 info->control = intf;
131 while (len > 3) {
132 if (buf [1] != USB_DT_CS_INTERFACE)
133 goto next_desc;
134
135 /* use bDescriptorSubType to identify the CDC descriptors.
136 * We expect devices with CDC header and union descriptors.
137 * For CDC Ethernet we need the ethernet descriptor.
138 * For RNDIS, ignore two (pointless) CDC modem descriptors
139 * in favor of a complicated OID-based RPC scheme doing what
140 * CDC Ethernet achieves with a simple descriptor.
141 */
142 switch (buf [2]) {
143 case USB_CDC_HEADER_TYPE:
144 if (info->header) {
145 dev_dbg(&intf->dev, "extra CDC header\n");
146 goto bad_desc;
147 }
148 info->header = (void *) buf;
149 if (info->header->bLength != sizeof *info->header) {
150 dev_dbg(&intf->dev, "CDC header len %u\n",
151 info->header->bLength);
152 goto bad_desc;
153 }
154 break;
155 case USB_CDC_ACM_TYPE:
156 /* paranoia: disambiguate a "real" vendor-specific
157 * modem interface from an RNDIS non-modem.
158 */
159 if (rndis) {
160 struct usb_cdc_acm_descriptor *acm;
161
162 acm = (void *) buf;
163 if (acm->bmCapabilities) {
164 dev_dbg(&intf->dev,
165 "ACM capabilities %02x, "
166 "not really RNDIS?\n",
167 acm->bmCapabilities);
168 goto bad_desc;
169 }
170 }
171 break;
172 case USB_CDC_UNION_TYPE:
173 if (info->u) {
174 dev_dbg(&intf->dev, "extra CDC union\n");
175 goto bad_desc;
176 }
177 info->u = (void *) buf;
178 if (info->u->bLength != sizeof *info->u) {
179 dev_dbg(&intf->dev, "CDC union len %u\n",
180 info->u->bLength);
181 goto bad_desc;
182 }
183
184 /* we need a master/control interface (what we're
185 * probed with) and a slave/data interface; union
186 * descriptors sort this all out.
187 */
188 info->control = usb_ifnum_to_if(dev->udev,
189 info->u->bMasterInterface0);
190 info->data = usb_ifnum_to_if(dev->udev,
191 info->u->bSlaveInterface0);
192 if (!info->control || !info->data) {
193 dev_dbg(&intf->dev,
194 "master #%u/%p slave #%u/%p\n",
195 info->u->bMasterInterface0,
196 info->control,
197 info->u->bSlaveInterface0,
198 info->data);
199 /* fall back to hard-wiring for RNDIS */
200 if (rndis) {
201 android_rndis_quirk = true;
202 goto next_desc;
203 }
204 goto bad_desc;
205 }
206 if (info->control != intf) {
207 dev_dbg(&intf->dev, "bogus CDC Union\n");
208 /* Ambit USB Cable Modem (and maybe others)
209 * interchanges master and slave interface.
210 */
211 if (info->data == intf) {
212 info->data = info->control;
213 info->control = intf;
214 } else
215 goto bad_desc;
216 }
217
218 /* a data interface altsetting does the real i/o */
219 d = &info->data->cur_altsetting->desc;
220 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
221 dev_dbg(&intf->dev, "slave class %u\n",
222 d->bInterfaceClass);
223 goto bad_desc;
224 }
225 break;
226 case USB_CDC_ETHERNET_TYPE:
227 if (info->ether) {
228 dev_dbg(&intf->dev, "extra CDC ether\n");
229 goto bad_desc;
230 }
231 info->ether = (void *) buf;
232 if (info->ether->bLength != sizeof *info->ether) {
233 dev_dbg(&intf->dev, "CDC ether len %u\n",
234 info->ether->bLength);
235 goto bad_desc;
236 }
237 dev->hard_mtu = le16_to_cpu(
238 info->ether->wMaxSegmentSize);
239 /* because of Zaurus, we may be ignoring the host
240 * side link address we were given.
241 */
242 break;
243 case USB_CDC_MDLM_TYPE:
244 if (desc) {
245 dev_dbg(&intf->dev, "extra MDLM descriptor\n");
246 goto bad_desc;
247 }
248
249 desc = (void *)buf;
250
251 if (desc->bLength != sizeof(*desc))
252 goto bad_desc;
253
254 if (memcmp(&desc->bGUID, mbm_guid, 16))
255 goto bad_desc;
256 break;
257 case USB_CDC_MDLM_DETAIL_TYPE:
258 if (detail) {
259 dev_dbg(&intf->dev, "extra MDLM detail descriptor\n");
260 goto bad_desc;
261 }
262
263 detail = (void *)buf;
264
265 if (detail->bGuidDescriptorType == 0) {
266 if (detail->bLength < (sizeof(*detail) + 1))
267 goto bad_desc;
268 } else
269 goto bad_desc;
270 break;
271 }
272next_desc:
273 len -= buf [0]; /* bLength */
274 buf += buf [0];
275 }
276
277 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
278 * CDC descriptors, so we'll hard-wire the interfaces and not check
279 * for descriptors.
280 *
281 * Some Android RNDIS devices have a CDC Union descriptor pointing
282 * to non-existing interfaces. Ignore that and attempt the same
283 * hard-wired 0 and 1 interfaces.
284 */
285 if (rndis && (!info->u || android_rndis_quirk)) {
286 info->control = usb_ifnum_to_if(dev->udev, 0);
287 info->data = usb_ifnum_to_if(dev->udev, 1);
288 if (!info->control || !info->data || info->control != intf) {
289 dev_dbg(&intf->dev,
290 "rndis: master #0/%p slave #1/%p\n",
291 info->control,
292 info->data);
293 goto bad_desc;
294 }
295
296 } else if (!info->header || !info->u || (!rndis && !info->ether)) {
297 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
298 info->header ? "" : "header ",
299 info->u ? "" : "union ",
300 info->ether ? "" : "ether ");
301 goto bad_desc;
302 }
303
304 /* claim data interface and set it up ... with side effects.
305 * network traffic can't flow until an altsetting is enabled.
306 */
307 status = usb_driver_claim_interface(driver, info->data, dev);
308 if (status < 0)
309 return status;
310 status = usbnet_get_endpoints(dev, info->data);
311 if (status < 0) {
312 /* ensure immediate exit from usbnet_disconnect */
313 usb_set_intfdata(info->data, NULL);
314 usb_driver_release_interface(driver, info->data);
315 return status;
316 }
317
318 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
319 dev->status = NULL;
320 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
321 struct usb_endpoint_descriptor *desc;
322
323 dev->status = &info->control->cur_altsetting->endpoint [0];
324 desc = &dev->status->desc;
325 if (!usb_endpoint_is_int_in(desc) ||
326 (le16_to_cpu(desc->wMaxPacketSize)
327 < sizeof(struct usb_cdc_notification)) ||
328 !desc->bInterval) {
329 dev_dbg(&intf->dev, "bad notification endpoint\n");
330 dev->status = NULL;
331 }
332 }
333 if (rndis && !dev->status) {
334 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
335 usb_set_intfdata(info->data, NULL);
336 usb_driver_release_interface(driver, info->data);
337 return -ENODEV;
338 }
339 return 0;
340
341bad_desc:
342 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
343 return -ENODEV;
344}
345EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
346
347void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
348{
349 struct cdc_state *info = (void *) &dev->data;
350 struct usb_driver *driver = driver_of(intf);
351
352 /* disconnect master --> disconnect slave */
353 if (intf == info->control && info->data) {
354 /* ensure immediate exit from usbnet_disconnect */
355 usb_set_intfdata(info->data, NULL);
356 usb_driver_release_interface(driver, info->data);
357 info->data = NULL;
358 }
359
360 /* and vice versa (just in case) */
361 else if (intf == info->data && info->control) {
362 /* ensure immediate exit from usbnet_disconnect */
363 usb_set_intfdata(info->control, NULL);
364 usb_driver_release_interface(driver, info->control);
365 info->control = NULL;
366 }
367}
368EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
369
370/*-------------------------------------------------------------------------
371 *
372 * Communications Device Class, Ethernet Control model
373 *
374 * Takes two interfaces. The DATA interface is inactive till an altsetting
375 * is selected. Configuration data includes class descriptors. There's
376 * an optional status endpoint on the control interface.
377 *
378 * This should interop with whatever the 2.4 "CDCEther.c" driver
379 * (by Brad Hards) talked with, with more functionality.
380 *
381 *-------------------------------------------------------------------------*/
382
383static void dumpspeed(struct usbnet *dev, __le32 *speeds)
384{
385 netif_info(dev, timer, dev->net,
386 "link speeds: %u kbps up, %u kbps down\n",
387 __le32_to_cpu(speeds[0]) / 1000,
388 __le32_to_cpu(speeds[1]) / 1000);
389}
390
391void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
392{
393 struct usb_cdc_notification *event;
394
395 if (urb->actual_length < sizeof *event)
396 return;
397
398 /* SPEED_CHANGE can get split into two 8-byte packets */
399 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
400 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
401 return;
402 }
403
404 event = urb->transfer_buffer;
405 switch (event->bNotificationType) {
406 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
407 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
408 event->wValue ? "on" : "off");
409 if (event->wValue)
410 netif_carrier_on(dev->net);
411 else
412 netif_carrier_off(dev->net);
413 break;
414 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
415 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
416 urb->actual_length);
417 if (urb->actual_length != (sizeof *event + 8))
418 set_bit(EVENT_STS_SPLIT, &dev->flags);
419 else
420 dumpspeed(dev, (__le32 *) &event[1]);
421 break;
422 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
423 * but there are no standard formats for the response data.
424 */
425 default:
426 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
427 event->bNotificationType);
428 break;
429 }
430}
431EXPORT_SYMBOL_GPL(usbnet_cdc_status);
432
433int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
434{
435 int status;
436 struct cdc_state *info = (void *) &dev->data;
437
438 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
439 < sizeof(struct cdc_state)));
440
441 status = usbnet_generic_cdc_bind(dev, intf);
442 if (status < 0)
443 return status;
444
445 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
446 if (status < 0) {
447 usb_set_intfdata(info->data, NULL);
448 usb_driver_release_interface(driver_of(intf), info->data);
449 return status;
450 }
451
452 /* FIXME cdc-ether has some multicast code too, though it complains
453 * in routine cases. info->ether describes the multicast support.
454 * Implement that here, manipulating the cdc filter as needed.
455 */
456 return 0;
457}
458EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
459
460static int cdc_manage_power(struct usbnet *dev, int on)
461{
462 dev->intf->needs_remote_wakeup = on;
463 return 0;
464}
465
466static const struct driver_info cdc_info = {
467 .description = "CDC Ethernet Device",
468 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
469 // .check_connect = cdc_check_connect,
470 .bind = usbnet_cdc_bind,
471 .unbind = usbnet_cdc_unbind,
472 .status = usbnet_cdc_status,
473 .manage_power = cdc_manage_power,
474};
475
476static const struct driver_info wwan_info = {
477 .description = "Mobile Broadband Network Device",
478 .flags = FLAG_WWAN,
479 .bind = usbnet_cdc_bind,
480 .unbind = usbnet_cdc_unbind,
481 .status = usbnet_cdc_status,
482 .manage_power = cdc_manage_power,
483};
484
485/*-------------------------------------------------------------------------*/
486
487#define HUAWEI_VENDOR_ID 0x12D1
488#define NOVATEL_VENDOR_ID 0x1410
489#define ZTE_VENDOR_ID 0x19D2
490
491static const struct usb_device_id products [] = {
492/*
493 * BLACKLIST !!
494 *
495 * First blacklist any products that are egregiously nonconformant
496 * with the CDC Ethernet specs. Minor braindamage we cope with; when
497 * they're not even trying, needing a separate driver is only the first
498 * of the differences to show up.
499 */
500
501#define ZAURUS_MASTER_INTERFACE \
502 .bInterfaceClass = USB_CLASS_COMM, \
503 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
504 .bInterfaceProtocol = USB_CDC_PROTO_NONE
505
506/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
507 * wire-incompatible with true CDC Ethernet implementations.
508 * (And, it seems, needlessly so...)
509 */
510{
511 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
512 | USB_DEVICE_ID_MATCH_DEVICE,
513 .idVendor = 0x04DD,
514 .idProduct = 0x8004,
515 ZAURUS_MASTER_INTERFACE,
516 .driver_info = 0,
517},
518
519/* PXA-25x based Sharp Zaurii. Note that it seems some of these
520 * (later models especially) may have shipped only with firmware
521 * advertising false "CDC MDLM" compatibility ... but we're not
522 * clear which models did that, so for now let's assume the worst.
523 */
524{
525 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
526 | USB_DEVICE_ID_MATCH_DEVICE,
527 .idVendor = 0x04DD,
528 .idProduct = 0x8005, /* A-300 */
529 ZAURUS_MASTER_INTERFACE,
530 .driver_info = 0,
531}, {
532 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
533 | USB_DEVICE_ID_MATCH_DEVICE,
534 .idVendor = 0x04DD,
535 .idProduct = 0x8006, /* B-500/SL-5600 */
536 ZAURUS_MASTER_INTERFACE,
537 .driver_info = 0,
538}, {
539 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
540 | USB_DEVICE_ID_MATCH_DEVICE,
541 .idVendor = 0x04DD,
542 .idProduct = 0x8007, /* C-700 */
543 ZAURUS_MASTER_INTERFACE,
544 .driver_info = 0,
545}, {
546 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
547 | USB_DEVICE_ID_MATCH_DEVICE,
548 .idVendor = 0x04DD,
549 .idProduct = 0x9031, /* C-750 C-760 */
550 ZAURUS_MASTER_INTERFACE,
551 .driver_info = 0,
552}, {
553 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
554 | USB_DEVICE_ID_MATCH_DEVICE,
555 .idVendor = 0x04DD,
556 .idProduct = 0x9032, /* SL-6000 */
557 ZAURUS_MASTER_INTERFACE,
558 .driver_info = 0,
559}, {
560 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
561 | USB_DEVICE_ID_MATCH_DEVICE,
562 .idVendor = 0x04DD,
563 /* reported with some C860 units */
564 .idProduct = 0x9050, /* C-860 */
565 ZAURUS_MASTER_INTERFACE,
566 .driver_info = 0,
567},
568
569/* Olympus has some models with a Zaurus-compatible option.
570 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
571 */
572{
573 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
574 | USB_DEVICE_ID_MATCH_DEVICE,
575 .idVendor = 0x07B4,
576 .idProduct = 0x0F02, /* R-1000 */
577 ZAURUS_MASTER_INTERFACE,
578 .driver_info = 0,
579},
580
581/* LG Electronics VL600 wants additional headers on every frame */
582{
583 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
584 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
585 .driver_info = 0,
586},
587
588/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
589{
590 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
591 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
592 .driver_info = 0,
593},
594
595/*
596 * WHITELIST!!!
597 *
598 * CDC Ether uses two interfaces, not necessarily consecutive.
599 * We match the main interface, ignoring the optional device
600 * class so we could handle devices that aren't exclusively
601 * CDC ether.
602 *
603 * NOTE: this match must come AFTER entries blacklisting devices
604 * because of bugs/quirks in a given product (like Zaurus, above).
605 */
606{
607 /* Novatel USB551L */
608 /* This match must come *before* the generic CDC-ETHER match so that
609 * we get FLAG_WWAN set on the device, since it's descriptors are
610 * generic CDC-ETHER.
611 */
612 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
613 | USB_DEVICE_ID_MATCH_PRODUCT
614 | USB_DEVICE_ID_MATCH_INT_INFO,
615 .idVendor = NOVATEL_VENDOR_ID,
616 .idProduct = 0xB001,
617 .bInterfaceClass = USB_CLASS_COMM,
618 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
619 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
620 .driver_info = (unsigned long)&wwan_info,
621}, {
622 /* ZTE (Vodafone) K3805-Z */
623 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
624 | USB_DEVICE_ID_MATCH_PRODUCT
625 | USB_DEVICE_ID_MATCH_INT_INFO,
626 .idVendor = ZTE_VENDOR_ID,
627 .idProduct = 0x1003,
628 .bInterfaceClass = USB_CLASS_COMM,
629 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
630 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
631 .driver_info = (unsigned long)&wwan_info,
632}, {
633 /* ZTE (Vodafone) K3806-Z */
634 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
635 | USB_DEVICE_ID_MATCH_PRODUCT
636 | USB_DEVICE_ID_MATCH_INT_INFO,
637 .idVendor = ZTE_VENDOR_ID,
638 .idProduct = 0x1015,
639 .bInterfaceClass = USB_CLASS_COMM,
640 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
641 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
642 .driver_info = (unsigned long)&wwan_info,
643}, {
644 /* ZTE (Vodafone) K4510-Z */
645 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
646 | USB_DEVICE_ID_MATCH_PRODUCT
647 | USB_DEVICE_ID_MATCH_INT_INFO,
648 .idVendor = ZTE_VENDOR_ID,
649 .idProduct = 0x1173,
650 .bInterfaceClass = USB_CLASS_COMM,
651 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
652 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
653 .driver_info = (unsigned long)&wwan_info,
654}, {
655 /* ZTE (Vodafone) K3770-Z */
656 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
657 | USB_DEVICE_ID_MATCH_PRODUCT
658 | USB_DEVICE_ID_MATCH_INT_INFO,
659 .idVendor = ZTE_VENDOR_ID,
660 .idProduct = 0x1177,
661 .bInterfaceClass = USB_CLASS_COMM,
662 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
663 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
664 .driver_info = (unsigned long)&wwan_info,
665}, {
666 /* ZTE (Vodafone) K3772-Z */
667 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
668 | USB_DEVICE_ID_MATCH_PRODUCT
669 | USB_DEVICE_ID_MATCH_INT_INFO,
670 .idVendor = ZTE_VENDOR_ID,
671 .idProduct = 0x1181,
672 .bInterfaceClass = USB_CLASS_COMM,
673 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
674 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
675 .driver_info = (unsigned long)&wwan_info,
676}, {
677 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
678 USB_CDC_PROTO_NONE),
679 .driver_info = (unsigned long) &cdc_info,
680}, {
681 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
682 USB_CDC_PROTO_NONE),
683 .driver_info = (unsigned long)&wwan_info,
684
685}, {
686 /* Various Huawei modems with a network port like the UMG1831 */
687 .match_flags = USB_DEVICE_ID_MATCH_VENDOR
688 | USB_DEVICE_ID_MATCH_INT_INFO,
689 .idVendor = HUAWEI_VENDOR_ID,
690 .bInterfaceClass = USB_CLASS_COMM,
691 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
692 .bInterfaceProtocol = 255,
693 .driver_info = (unsigned long)&wwan_info,
694},
695 { }, // END
696};
697MODULE_DEVICE_TABLE(usb, products);
698
699static struct usb_driver cdc_driver = {
700 .name = "cdc_ether",
701 .id_table = products,
702 .probe = usbnet_probe,
703 .disconnect = usbnet_disconnect,
704 .suspend = usbnet_suspend,
705 .resume = usbnet_resume,
706 .reset_resume = usbnet_resume,
707 .supports_autosuspend = 1,
708 .disable_hub_initiated_lpm = 1,
709};
710
711module_usb_driver(cdc_driver);
712
713MODULE_AUTHOR("David Brownell");
714MODULE_DESCRIPTION("USB CDC Ethernet devices");
715MODULE_LICENSE("GPL");