Loading...
1/*
2 * USB Serial Converter driver
3 *
4 * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
5 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
6 * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License version
10 * 2 as published by the Free Software Foundation.
11 *
12 * This driver was originally based on the ACM driver by Armin Fuerst (which was
13 * based on a driver by Brad Keryan)
14 *
15 * See Documentation/usb/usb-serial.txt for more information on using this
16 * driver
17 *
18 */
19
20#include <linux/kernel.h>
21#include <linux/errno.h>
22#include <linux/init.h>
23#include <linux/slab.h>
24#include <linux/tty.h>
25#include <linux/tty_driver.h>
26#include <linux/tty_flip.h>
27#include <linux/module.h>
28#include <linux/moduleparam.h>
29#include <linux/seq_file.h>
30#include <linux/spinlock.h>
31#include <linux/mutex.h>
32#include <linux/list.h>
33#include <linux/uaccess.h>
34#include <linux/serial.h>
35#include <linux/usb.h>
36#include <linux/usb/serial.h>
37#include <linux/kfifo.h>
38#include "pl2303.h"
39
40/*
41 * Version Information
42 */
43#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
44#define DRIVER_DESC "USB Serial Driver core"
45
46/* Driver structure we register with the USB core */
47static struct usb_driver usb_serial_driver = {
48 .name = "usbserial",
49 .probe = usb_serial_probe,
50 .disconnect = usb_serial_disconnect,
51 .suspend = usb_serial_suspend,
52 .resume = usb_serial_resume,
53 .no_dynamic_id = 1,
54 .supports_autosuspend = 1,
55};
56
57/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
58 the MODULE_DEVICE_TABLE declarations in each serial driver
59 cause the "hotplug" program to pull in whatever module is necessary
60 via modprobe, and modprobe will load usbserial because the serial
61 drivers depend on it.
62*/
63
64static int debug;
65/* initially all NULL */
66static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
67static DEFINE_MUTEX(table_lock);
68static LIST_HEAD(usb_serial_driver_list);
69
70/*
71 * Look up the serial structure. If it is found and it hasn't been
72 * disconnected, return with its disc_mutex held and its refcount
73 * incremented. Otherwise return NULL.
74 */
75struct usb_serial *usb_serial_get_by_index(unsigned index)
76{
77 struct usb_serial *serial;
78
79 mutex_lock(&table_lock);
80 serial = serial_table[index];
81
82 if (serial) {
83 mutex_lock(&serial->disc_mutex);
84 if (serial->disconnected) {
85 mutex_unlock(&serial->disc_mutex);
86 serial = NULL;
87 } else {
88 kref_get(&serial->kref);
89 }
90 }
91 mutex_unlock(&table_lock);
92 return serial;
93}
94
95static struct usb_serial *get_free_serial(struct usb_serial *serial,
96 int num_ports, unsigned int *minor)
97{
98 unsigned int i, j;
99 int good_spot;
100
101 dbg("%s %d", __func__, num_ports);
102
103 *minor = 0;
104 mutex_lock(&table_lock);
105 for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
106 if (serial_table[i])
107 continue;
108
109 good_spot = 1;
110 for (j = 1; j <= num_ports-1; ++j)
111 if ((i+j >= SERIAL_TTY_MINORS) || (serial_table[i+j])) {
112 good_spot = 0;
113 i += j;
114 break;
115 }
116 if (good_spot == 0)
117 continue;
118
119 *minor = i;
120 j = 0;
121 dbg("%s - minor base = %d", __func__, *minor);
122 for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
123 serial_table[i] = serial;
124 serial->port[j++]->number = i;
125 }
126 mutex_unlock(&table_lock);
127 return serial;
128 }
129 mutex_unlock(&table_lock);
130 return NULL;
131}
132
133static void return_serial(struct usb_serial *serial)
134{
135 int i;
136
137 dbg("%s", __func__);
138
139 mutex_lock(&table_lock);
140 for (i = 0; i < serial->num_ports; ++i)
141 serial_table[serial->minor + i] = NULL;
142 mutex_unlock(&table_lock);
143}
144
145static void destroy_serial(struct kref *kref)
146{
147 struct usb_serial *serial;
148 struct usb_serial_port *port;
149 int i;
150
151 serial = to_usb_serial(kref);
152
153 dbg("%s - %s", __func__, serial->type->description);
154
155 /* return the minor range that this device had */
156 if (serial->minor != SERIAL_TTY_NO_MINOR)
157 return_serial(serial);
158
159 if (serial->attached)
160 serial->type->release(serial);
161
162 /* Now that nothing is using the ports, they can be freed */
163 for (i = 0; i < serial->num_port_pointers; ++i) {
164 port = serial->port[i];
165 if (port) {
166 port->serial = NULL;
167 put_device(&port->dev);
168 }
169 }
170
171 usb_put_dev(serial->dev);
172 kfree(serial);
173}
174
175void usb_serial_put(struct usb_serial *serial)
176{
177 kref_put(&serial->kref, destroy_serial);
178}
179
180/*****************************************************************************
181 * Driver tty interface functions
182 *****************************************************************************/
183
184/**
185 * serial_install - install tty
186 * @driver: the driver (USB in our case)
187 * @tty: the tty being created
188 *
189 * Create the termios objects for this tty. We use the default
190 * USB serial settings but permit them to be overridden by
191 * serial->type->init_termios.
192 *
193 * This is the first place a new tty gets used. Hence this is where we
194 * acquire references to the usb_serial structure and the driver module,
195 * where we store a pointer to the port, and where we do an autoresume.
196 * All these actions are reversed in serial_cleanup().
197 */
198static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
199{
200 int idx = tty->index;
201 struct usb_serial *serial;
202 struct usb_serial_port *port;
203 int retval = -ENODEV;
204
205 dbg("%s", __func__);
206
207 serial = usb_serial_get_by_index(idx);
208 if (!serial)
209 return retval;
210
211 port = serial->port[idx - serial->minor];
212 if (!port)
213 goto error_no_port;
214 if (!try_module_get(serial->type->driver.owner))
215 goto error_module_get;
216
217 /* perform the standard setup */
218 retval = tty_init_termios(tty);
219 if (retval)
220 goto error_init_termios;
221
222 retval = usb_autopm_get_interface(serial->interface);
223 if (retval)
224 goto error_get_interface;
225
226 mutex_unlock(&serial->disc_mutex);
227
228 /* allow the driver to update the settings */
229 if (serial->type->init_termios)
230 serial->type->init_termios(tty);
231
232 tty->driver_data = port;
233
234 /* Final install (we use the default method) */
235 tty_driver_kref_get(driver);
236 tty->count++;
237 driver->ttys[idx] = tty;
238 return retval;
239
240 error_get_interface:
241 error_init_termios:
242 module_put(serial->type->driver.owner);
243 error_module_get:
244 error_no_port:
245 usb_serial_put(serial);
246 mutex_unlock(&serial->disc_mutex);
247 return retval;
248}
249
250static int serial_activate(struct tty_port *tport, struct tty_struct *tty)
251{
252 struct usb_serial_port *port =
253 container_of(tport, struct usb_serial_port, port);
254 struct usb_serial *serial = port->serial;
255 int retval;
256
257 mutex_lock(&serial->disc_mutex);
258 if (serial->disconnected)
259 retval = -ENODEV;
260 else
261 retval = port->serial->type->open(tty, port);
262 mutex_unlock(&serial->disc_mutex);
263 return retval;
264}
265
266static int serial_open(struct tty_struct *tty, struct file *filp)
267{
268 struct usb_serial_port *port = tty->driver_data;
269
270 dbg("%s - port %d", __func__, port->number);
271 return tty_port_open(&port->port, tty, filp);
272}
273
274/**
275 * serial_down - shut down hardware
276 * @tport: tty port to shut down
277 *
278 * Shut down a USB serial port unless it is the console. We never
279 * shut down the console hardware as it will always be in use. Serialized
280 * against activate by the tport mutex and kept to matching open/close pairs
281 * of calls by the ASYNCB_INITIALIZED flag.
282 */
283static void serial_down(struct tty_port *tport)
284{
285 struct usb_serial_port *port =
286 container_of(tport, struct usb_serial_port, port);
287 struct usb_serial_driver *drv = port->serial->type;
288 /*
289 * The console is magical. Do not hang up the console hardware
290 * or there will be tears.
291 */
292 if (port->port.console)
293 return;
294 if (drv->close)
295 drv->close(port);
296}
297
298static void serial_hangup(struct tty_struct *tty)
299{
300 struct usb_serial_port *port = tty->driver_data;
301 dbg("%s - port %d", __func__, port->number);
302 tty_port_hangup(&port->port);
303}
304
305static void serial_close(struct tty_struct *tty, struct file *filp)
306{
307 struct usb_serial_port *port = tty->driver_data;
308 dbg("%s - port %d", __func__, port->number);
309 tty_port_close(&port->port, tty, filp);
310}
311
312/**
313 * serial_cleanup - free resources post close/hangup
314 * @port: port to free up
315 *
316 * Do the resource freeing and refcount dropping for the port.
317 * Avoid freeing the console.
318 *
319 * Called asynchronously after the last tty kref is dropped,
320 * and the tty layer has already done the tty_shutdown(tty);
321 */
322static void serial_cleanup(struct tty_struct *tty)
323{
324 struct usb_serial_port *port = tty->driver_data;
325 struct usb_serial *serial;
326 struct module *owner;
327
328 /* The console is magical. Do not hang up the console hardware
329 * or there will be tears.
330 */
331 if (port->port.console)
332 return;
333
334 dbg("%s - port %d", __func__, port->number);
335
336 tty->driver_data = NULL;
337
338 serial = port->serial;
339 owner = serial->type->driver.owner;
340
341 mutex_lock(&serial->disc_mutex);
342 if (!serial->disconnected)
343 usb_autopm_put_interface(serial->interface);
344 mutex_unlock(&serial->disc_mutex);
345
346 usb_serial_put(serial);
347 module_put(owner);
348}
349
350static int serial_write(struct tty_struct *tty, const unsigned char *buf,
351 int count)
352{
353 struct usb_serial_port *port = tty->driver_data;
354 int retval = -ENODEV;
355
356 if (port->serial->dev->state == USB_STATE_NOTATTACHED)
357 goto exit;
358
359 dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
360
361 /* pass on to the driver specific version of this function */
362 retval = port->serial->type->write(tty, port, buf, count);
363
364exit:
365 return retval;
366}
367
368static int serial_write_room(struct tty_struct *tty)
369{
370 struct usb_serial_port *port = tty->driver_data;
371 dbg("%s - port %d", __func__, port->number);
372 /* pass on to the driver specific version of this function */
373 return port->serial->type->write_room(tty);
374}
375
376static int serial_chars_in_buffer(struct tty_struct *tty)
377{
378 struct usb_serial_port *port = tty->driver_data;
379 dbg("%s - port %d", __func__, port->number);
380
381 /* if the device was unplugged then any remaining characters
382 fell out of the connector ;) */
383 if (port->serial->disconnected)
384 return 0;
385 /* pass on to the driver specific version of this function */
386 return port->serial->type->chars_in_buffer(tty);
387}
388
389static void serial_throttle(struct tty_struct *tty)
390{
391 struct usb_serial_port *port = tty->driver_data;
392 dbg("%s - port %d", __func__, port->number);
393
394 /* pass on to the driver specific version of this function */
395 if (port->serial->type->throttle)
396 port->serial->type->throttle(tty);
397}
398
399static void serial_unthrottle(struct tty_struct *tty)
400{
401 struct usb_serial_port *port = tty->driver_data;
402 dbg("%s - port %d", __func__, port->number);
403
404 /* pass on to the driver specific version of this function */
405 if (port->serial->type->unthrottle)
406 port->serial->type->unthrottle(tty);
407}
408
409static int serial_ioctl(struct tty_struct *tty,
410 unsigned int cmd, unsigned long arg)
411{
412 struct usb_serial_port *port = tty->driver_data;
413 int retval = -ENODEV;
414
415 dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
416
417 /* pass on to the driver specific version of this function
418 if it is available */
419 if (port->serial->type->ioctl) {
420 retval = port->serial->type->ioctl(tty, cmd, arg);
421 } else
422 retval = -ENOIOCTLCMD;
423 return retval;
424}
425
426static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
427{
428 struct usb_serial_port *port = tty->driver_data;
429 dbg("%s - port %d", __func__, port->number);
430
431 /* pass on to the driver specific version of this function
432 if it is available */
433 if (port->serial->type->set_termios)
434 port->serial->type->set_termios(tty, port, old);
435 else
436 tty_termios_copy_hw(tty->termios, old);
437}
438
439static int serial_break(struct tty_struct *tty, int break_state)
440{
441 struct usb_serial_port *port = tty->driver_data;
442
443 dbg("%s - port %d", __func__, port->number);
444
445 /* pass on to the driver specific version of this function
446 if it is available */
447 if (port->serial->type->break_ctl)
448 port->serial->type->break_ctl(tty, break_state);
449 return 0;
450}
451
452static int serial_proc_show(struct seq_file *m, void *v)
453{
454 struct usb_serial *serial;
455 int i;
456 char tmp[40];
457
458 dbg("%s", __func__);
459 seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
460 for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
461 serial = usb_serial_get_by_index(i);
462 if (serial == NULL)
463 continue;
464
465 seq_printf(m, "%d:", i);
466 if (serial->type->driver.owner)
467 seq_printf(m, " module:%s",
468 module_name(serial->type->driver.owner));
469 seq_printf(m, " name:\"%s\"",
470 serial->type->description);
471 seq_printf(m, " vendor:%04x product:%04x",
472 le16_to_cpu(serial->dev->descriptor.idVendor),
473 le16_to_cpu(serial->dev->descriptor.idProduct));
474 seq_printf(m, " num_ports:%d", serial->num_ports);
475 seq_printf(m, " port:%d", i - serial->minor + 1);
476 usb_make_path(serial->dev, tmp, sizeof(tmp));
477 seq_printf(m, " path:%s", tmp);
478
479 seq_putc(m, '\n');
480 usb_serial_put(serial);
481 mutex_unlock(&serial->disc_mutex);
482 }
483 return 0;
484}
485
486static int serial_proc_open(struct inode *inode, struct file *file)
487{
488 return single_open(file, serial_proc_show, NULL);
489}
490
491static const struct file_operations serial_proc_fops = {
492 .owner = THIS_MODULE,
493 .open = serial_proc_open,
494 .read = seq_read,
495 .llseek = seq_lseek,
496 .release = single_release,
497};
498
499static int serial_tiocmget(struct tty_struct *tty)
500{
501 struct usb_serial_port *port = tty->driver_data;
502
503 dbg("%s - port %d", __func__, port->number);
504
505 if (port->serial->type->tiocmget)
506 return port->serial->type->tiocmget(tty);
507 return -EINVAL;
508}
509
510static int serial_tiocmset(struct tty_struct *tty,
511 unsigned int set, unsigned int clear)
512{
513 struct usb_serial_port *port = tty->driver_data;
514
515 dbg("%s - port %d", __func__, port->number);
516
517 if (port->serial->type->tiocmset)
518 return port->serial->type->tiocmset(tty, set, clear);
519 return -EINVAL;
520}
521
522static int serial_get_icount(struct tty_struct *tty,
523 struct serial_icounter_struct *icount)
524{
525 struct usb_serial_port *port = tty->driver_data;
526
527 dbg("%s - port %d", __func__, port->number);
528
529 if (port->serial->type->get_icount)
530 return port->serial->type->get_icount(tty, icount);
531 return -EINVAL;
532}
533
534/*
535 * We would be calling tty_wakeup here, but unfortunately some line
536 * disciplines have an annoying habit of calling tty->write from
537 * the write wakeup callback (e.g. n_hdlc.c).
538 */
539void usb_serial_port_softint(struct usb_serial_port *port)
540{
541 schedule_work(&port->work);
542}
543EXPORT_SYMBOL_GPL(usb_serial_port_softint);
544
545static void usb_serial_port_work(struct work_struct *work)
546{
547 struct usb_serial_port *port =
548 container_of(work, struct usb_serial_port, work);
549 struct tty_struct *tty;
550
551 dbg("%s - port %d", __func__, port->number);
552
553 tty = tty_port_tty_get(&port->port);
554 if (!tty)
555 return;
556
557 tty_wakeup(tty);
558 tty_kref_put(tty);
559}
560
561static void kill_traffic(struct usb_serial_port *port)
562{
563 int i;
564
565 usb_kill_urb(port->read_urb);
566 usb_kill_urb(port->write_urb);
567 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
568 usb_kill_urb(port->write_urbs[i]);
569 /*
570 * This is tricky.
571 * Some drivers submit the read_urb in the
572 * handler for the write_urb or vice versa
573 * this order determines the order in which
574 * usb_kill_urb() must be used to reliably
575 * kill the URBs. As it is unknown here,
576 * both orders must be used in turn.
577 * The call below is not redundant.
578 */
579 usb_kill_urb(port->read_urb);
580 usb_kill_urb(port->interrupt_in_urb);
581 usb_kill_urb(port->interrupt_out_urb);
582}
583
584static void port_release(struct device *dev)
585{
586 struct usb_serial_port *port = to_usb_serial_port(dev);
587 int i;
588
589 dbg ("%s - %s", __func__, dev_name(dev));
590
591 /*
592 * Stop all the traffic before cancelling the work, so that
593 * nobody will restart it by calling usb_serial_port_softint.
594 */
595 kill_traffic(port);
596 cancel_work_sync(&port->work);
597
598 usb_free_urb(port->read_urb);
599 usb_free_urb(port->write_urb);
600 usb_free_urb(port->interrupt_in_urb);
601 usb_free_urb(port->interrupt_out_urb);
602 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
603 usb_free_urb(port->write_urbs[i]);
604 kfree(port->bulk_out_buffers[i]);
605 }
606 kfifo_free(&port->write_fifo);
607 kfree(port->bulk_in_buffer);
608 kfree(port->bulk_out_buffer);
609 kfree(port->interrupt_in_buffer);
610 kfree(port->interrupt_out_buffer);
611 kfree(port);
612}
613
614static struct usb_serial *create_serial(struct usb_device *dev,
615 struct usb_interface *interface,
616 struct usb_serial_driver *driver)
617{
618 struct usb_serial *serial;
619
620 serial = kzalloc(sizeof(*serial), GFP_KERNEL);
621 if (!serial) {
622 dev_err(&dev->dev, "%s - out of memory\n", __func__);
623 return NULL;
624 }
625 serial->dev = usb_get_dev(dev);
626 serial->type = driver;
627 serial->interface = interface;
628 kref_init(&serial->kref);
629 mutex_init(&serial->disc_mutex);
630 serial->minor = SERIAL_TTY_NO_MINOR;
631
632 return serial;
633}
634
635static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
636 struct usb_serial_driver *drv)
637{
638 struct usb_dynid *dynid;
639
640 spin_lock(&drv->dynids.lock);
641 list_for_each_entry(dynid, &drv->dynids.list, node) {
642 if (usb_match_one_id(intf, &dynid->id)) {
643 spin_unlock(&drv->dynids.lock);
644 return &dynid->id;
645 }
646 }
647 spin_unlock(&drv->dynids.lock);
648 return NULL;
649}
650
651static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
652 struct usb_interface *intf)
653{
654 const struct usb_device_id *id;
655
656 id = usb_match_id(intf, drv->id_table);
657 if (id) {
658 dbg("static descriptor matches");
659 goto exit;
660 }
661 id = match_dynamic_id(intf, drv);
662 if (id)
663 dbg("dynamic descriptor matches");
664exit:
665 return id;
666}
667
668/* Caller must hold table_lock */
669static struct usb_serial_driver *search_serial_device(
670 struct usb_interface *iface)
671{
672 const struct usb_device_id *id;
673 struct usb_serial_driver *drv;
674
675 /* Check if the usb id matches a known device */
676 list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
677 id = get_iface_id(drv, iface);
678 if (id)
679 return drv;
680 }
681
682 return NULL;
683}
684
685static int serial_carrier_raised(struct tty_port *port)
686{
687 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
688 struct usb_serial_driver *drv = p->serial->type;
689 if (drv->carrier_raised)
690 return drv->carrier_raised(p);
691 /* No carrier control - don't block */
692 return 1;
693}
694
695static void serial_dtr_rts(struct tty_port *port, int on)
696{
697 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
698 struct usb_serial_driver *drv = p->serial->type;
699 if (drv->dtr_rts)
700 drv->dtr_rts(p, on);
701}
702
703static const struct tty_port_operations serial_port_ops = {
704 .carrier_raised = serial_carrier_raised,
705 .dtr_rts = serial_dtr_rts,
706 .activate = serial_activate,
707 .shutdown = serial_down,
708};
709
710int usb_serial_probe(struct usb_interface *interface,
711 const struct usb_device_id *id)
712{
713 struct usb_device *dev = interface_to_usbdev(interface);
714 struct usb_serial *serial = NULL;
715 struct usb_serial_port *port;
716 struct usb_host_interface *iface_desc;
717 struct usb_endpoint_descriptor *endpoint;
718 struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
719 struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
720 struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
721 struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
722 struct usb_serial_driver *type = NULL;
723 int retval;
724 unsigned int minor;
725 int buffer_size;
726 int i;
727 int num_interrupt_in = 0;
728 int num_interrupt_out = 0;
729 int num_bulk_in = 0;
730 int num_bulk_out = 0;
731 int num_ports = 0;
732 int max_endpoints;
733
734 mutex_lock(&table_lock);
735 type = search_serial_device(interface);
736 if (!type) {
737 mutex_unlock(&table_lock);
738 dbg("none matched");
739 return -ENODEV;
740 }
741
742 if (!try_module_get(type->driver.owner)) {
743 mutex_unlock(&table_lock);
744 dev_err(&interface->dev, "module get failed, exiting\n");
745 return -EIO;
746 }
747 mutex_unlock(&table_lock);
748
749 serial = create_serial(dev, interface, type);
750 if (!serial) {
751 module_put(type->driver.owner);
752 dev_err(&interface->dev, "%s - out of memory\n", __func__);
753 return -ENOMEM;
754 }
755
756 /* if this device type has a probe function, call it */
757 if (type->probe) {
758 const struct usb_device_id *id;
759
760 id = get_iface_id(type, interface);
761 retval = type->probe(serial, id);
762
763 if (retval) {
764 dbg("sub driver rejected device");
765 kfree(serial);
766 module_put(type->driver.owner);
767 return retval;
768 }
769 }
770
771 /* descriptor matches, let's find the endpoints needed */
772 /* check out the endpoints */
773 iface_desc = interface->cur_altsetting;
774 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
775 endpoint = &iface_desc->endpoint[i].desc;
776
777 if (usb_endpoint_is_bulk_in(endpoint)) {
778 /* we found a bulk in endpoint */
779 dbg("found bulk in on endpoint %d", i);
780 bulk_in_endpoint[num_bulk_in] = endpoint;
781 ++num_bulk_in;
782 }
783
784 if (usb_endpoint_is_bulk_out(endpoint)) {
785 /* we found a bulk out endpoint */
786 dbg("found bulk out on endpoint %d", i);
787 bulk_out_endpoint[num_bulk_out] = endpoint;
788 ++num_bulk_out;
789 }
790
791 if (usb_endpoint_is_int_in(endpoint)) {
792 /* we found a interrupt in endpoint */
793 dbg("found interrupt in on endpoint %d", i);
794 interrupt_in_endpoint[num_interrupt_in] = endpoint;
795 ++num_interrupt_in;
796 }
797
798 if (usb_endpoint_is_int_out(endpoint)) {
799 /* we found an interrupt out endpoint */
800 dbg("found interrupt out on endpoint %d", i);
801 interrupt_out_endpoint[num_interrupt_out] = endpoint;
802 ++num_interrupt_out;
803 }
804 }
805
806#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
807 /* BEGIN HORRIBLE HACK FOR PL2303 */
808 /* this is needed due to the looney way its endpoints are set up */
809 if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
810 (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
811 ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
812 (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
813 ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
814 (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
815 ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
816 (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
817 if (interface != dev->actconfig->interface[0]) {
818 /* check out the endpoints of the other interface*/
819 iface_desc = dev->actconfig->interface[0]->cur_altsetting;
820 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
821 endpoint = &iface_desc->endpoint[i].desc;
822 if (usb_endpoint_is_int_in(endpoint)) {
823 /* we found a interrupt in endpoint */
824 dbg("found interrupt in for Prolific device on separate interface");
825 interrupt_in_endpoint[num_interrupt_in] = endpoint;
826 ++num_interrupt_in;
827 }
828 }
829 }
830
831 /* Now make sure the PL-2303 is configured correctly.
832 * If not, give up now and hope this hack will work
833 * properly during a later invocation of usb_serial_probe
834 */
835 if (num_bulk_in == 0 || num_bulk_out == 0) {
836 dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
837 kfree(serial);
838 module_put(type->driver.owner);
839 return -ENODEV;
840 }
841 }
842 /* END HORRIBLE HACK FOR PL2303 */
843#endif
844
845#ifdef CONFIG_USB_SERIAL_GENERIC
846 if (type == &usb_serial_generic_device) {
847 num_ports = num_bulk_out;
848 if (num_ports == 0) {
849 dev_err(&interface->dev,
850 "Generic device with no bulk out, not allowed.\n");
851 kfree(serial);
852 module_put(type->driver.owner);
853 return -EIO;
854 }
855 }
856#endif
857 if (!num_ports) {
858 /* if this device type has a calc_num_ports function, call it */
859 if (type->calc_num_ports)
860 num_ports = type->calc_num_ports(serial);
861 if (!num_ports)
862 num_ports = type->num_ports;
863 }
864
865 serial->num_ports = num_ports;
866 serial->num_bulk_in = num_bulk_in;
867 serial->num_bulk_out = num_bulk_out;
868 serial->num_interrupt_in = num_interrupt_in;
869 serial->num_interrupt_out = num_interrupt_out;
870
871 /* found all that we need */
872 dev_info(&interface->dev, "%s converter detected\n",
873 type->description);
874
875 /* create our ports, we need as many as the max endpoints */
876 /* we don't use num_ports here because some devices have more
877 endpoint pairs than ports */
878 max_endpoints = max(num_bulk_in, num_bulk_out);
879 max_endpoints = max(max_endpoints, num_interrupt_in);
880 max_endpoints = max(max_endpoints, num_interrupt_out);
881 max_endpoints = max(max_endpoints, (int)serial->num_ports);
882 serial->num_port_pointers = max_endpoints;
883
884 dbg("%s - setting up %d port structures for this device",
885 __func__, max_endpoints);
886 for (i = 0; i < max_endpoints; ++i) {
887 port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
888 if (!port)
889 goto probe_error;
890 tty_port_init(&port->port);
891 port->port.ops = &serial_port_ops;
892 port->serial = serial;
893 spin_lock_init(&port->lock);
894 /* Keep this for private driver use for the moment but
895 should probably go away */
896 INIT_WORK(&port->work, usb_serial_port_work);
897 serial->port[i] = port;
898 port->dev.parent = &interface->dev;
899 port->dev.driver = NULL;
900 port->dev.bus = &usb_serial_bus_type;
901 port->dev.release = &port_release;
902 device_initialize(&port->dev);
903 }
904
905 /* set up the endpoint information */
906 for (i = 0; i < num_bulk_in; ++i) {
907 endpoint = bulk_in_endpoint[i];
908 port = serial->port[i];
909 port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
910 if (!port->read_urb) {
911 dev_err(&interface->dev, "No free urbs available\n");
912 goto probe_error;
913 }
914 buffer_size = max_t(int, serial->type->bulk_in_size,
915 le16_to_cpu(endpoint->wMaxPacketSize));
916 port->bulk_in_size = buffer_size;
917 port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
918 port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
919 if (!port->bulk_in_buffer) {
920 dev_err(&interface->dev,
921 "Couldn't allocate bulk_in_buffer\n");
922 goto probe_error;
923 }
924 usb_fill_bulk_urb(port->read_urb, dev,
925 usb_rcvbulkpipe(dev,
926 endpoint->bEndpointAddress),
927 port->bulk_in_buffer, buffer_size,
928 serial->type->read_bulk_callback, port);
929 }
930
931 for (i = 0; i < num_bulk_out; ++i) {
932 int j;
933
934 endpoint = bulk_out_endpoint[i];
935 port = serial->port[i];
936 port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
937 if (!port->write_urb) {
938 dev_err(&interface->dev, "No free urbs available\n");
939 goto probe_error;
940 }
941 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
942 goto probe_error;
943 buffer_size = serial->type->bulk_out_size;
944 if (!buffer_size)
945 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
946 port->bulk_out_size = buffer_size;
947 port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
948 port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
949 if (!port->bulk_out_buffer) {
950 dev_err(&interface->dev,
951 "Couldn't allocate bulk_out_buffer\n");
952 goto probe_error;
953 }
954 usb_fill_bulk_urb(port->write_urb, dev,
955 usb_sndbulkpipe(dev,
956 endpoint->bEndpointAddress),
957 port->bulk_out_buffer, buffer_size,
958 serial->type->write_bulk_callback, port);
959 for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
960 set_bit(j, &port->write_urbs_free);
961 port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
962 if (!port->write_urbs[j]) {
963 dev_err(&interface->dev,
964 "No free urbs available\n");
965 goto probe_error;
966 }
967 port->bulk_out_buffers[j] = kmalloc(buffer_size,
968 GFP_KERNEL);
969 if (!port->bulk_out_buffers[j]) {
970 dev_err(&interface->dev,
971 "Couldn't allocate bulk_out_buffer\n");
972 goto probe_error;
973 }
974 usb_fill_bulk_urb(port->write_urbs[j], dev,
975 usb_sndbulkpipe(dev,
976 endpoint->bEndpointAddress),
977 port->bulk_out_buffers[j], buffer_size,
978 serial->type->write_bulk_callback,
979 port);
980 }
981 }
982
983 if (serial->type->read_int_callback) {
984 for (i = 0; i < num_interrupt_in; ++i) {
985 endpoint = interrupt_in_endpoint[i];
986 port = serial->port[i];
987 port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
988 if (!port->interrupt_in_urb) {
989 dev_err(&interface->dev,
990 "No free urbs available\n");
991 goto probe_error;
992 }
993 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
994 port->interrupt_in_endpointAddress =
995 endpoint->bEndpointAddress;
996 port->interrupt_in_buffer = kmalloc(buffer_size,
997 GFP_KERNEL);
998 if (!port->interrupt_in_buffer) {
999 dev_err(&interface->dev,
1000 "Couldn't allocate interrupt_in_buffer\n");
1001 goto probe_error;
1002 }
1003 usb_fill_int_urb(port->interrupt_in_urb, dev,
1004 usb_rcvintpipe(dev,
1005 endpoint->bEndpointAddress),
1006 port->interrupt_in_buffer, buffer_size,
1007 serial->type->read_int_callback, port,
1008 endpoint->bInterval);
1009 }
1010 } else if (num_interrupt_in) {
1011 dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined");
1012 }
1013
1014 if (serial->type->write_int_callback) {
1015 for (i = 0; i < num_interrupt_out; ++i) {
1016 endpoint = interrupt_out_endpoint[i];
1017 port = serial->port[i];
1018 port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
1019 if (!port->interrupt_out_urb) {
1020 dev_err(&interface->dev,
1021 "No free urbs available\n");
1022 goto probe_error;
1023 }
1024 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
1025 port->interrupt_out_size = buffer_size;
1026 port->interrupt_out_endpointAddress =
1027 endpoint->bEndpointAddress;
1028 port->interrupt_out_buffer = kmalloc(buffer_size,
1029 GFP_KERNEL);
1030 if (!port->interrupt_out_buffer) {
1031 dev_err(&interface->dev,
1032 "Couldn't allocate interrupt_out_buffer\n");
1033 goto probe_error;
1034 }
1035 usb_fill_int_urb(port->interrupt_out_urb, dev,
1036 usb_sndintpipe(dev,
1037 endpoint->bEndpointAddress),
1038 port->interrupt_out_buffer, buffer_size,
1039 serial->type->write_int_callback, port,
1040 endpoint->bInterval);
1041 }
1042 } else if (num_interrupt_out) {
1043 dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined");
1044 }
1045
1046 /* if this device type has an attach function, call it */
1047 if (type->attach) {
1048 retval = type->attach(serial);
1049 if (retval < 0)
1050 goto probe_error;
1051 serial->attached = 1;
1052 if (retval > 0) {
1053 /* quietly accept this device, but don't bind to a
1054 serial port as it's about to disappear */
1055 serial->num_ports = 0;
1056 goto exit;
1057 }
1058 } else {
1059 serial->attached = 1;
1060 }
1061
1062 if (get_free_serial(serial, num_ports, &minor) == NULL) {
1063 dev_err(&interface->dev, "No more free serial devices\n");
1064 goto probe_error;
1065 }
1066 serial->minor = minor;
1067
1068 /* register all of the individual ports with the driver core */
1069 for (i = 0; i < num_ports; ++i) {
1070 port = serial->port[i];
1071 dev_set_name(&port->dev, "ttyUSB%d", port->number);
1072 dbg ("%s - registering %s", __func__, dev_name(&port->dev));
1073 port->dev_state = PORT_REGISTERING;
1074 device_enable_async_suspend(&port->dev);
1075
1076 retval = device_add(&port->dev);
1077 if (retval) {
1078 dev_err(&port->dev, "Error registering port device, "
1079 "continuing\n");
1080 port->dev_state = PORT_UNREGISTERED;
1081 } else {
1082 port->dev_state = PORT_REGISTERED;
1083 }
1084 }
1085
1086 usb_serial_console_init(debug, minor);
1087
1088exit:
1089 /* success */
1090 usb_set_intfdata(interface, serial);
1091 module_put(type->driver.owner);
1092 return 0;
1093
1094probe_error:
1095 usb_serial_put(serial);
1096 module_put(type->driver.owner);
1097 return -EIO;
1098}
1099EXPORT_SYMBOL_GPL(usb_serial_probe);
1100
1101void usb_serial_disconnect(struct usb_interface *interface)
1102{
1103 int i;
1104 struct usb_serial *serial = usb_get_intfdata(interface);
1105 struct device *dev = &interface->dev;
1106 struct usb_serial_port *port;
1107
1108 usb_serial_console_disconnect(serial);
1109 dbg("%s", __func__);
1110
1111 mutex_lock(&serial->disc_mutex);
1112 usb_set_intfdata(interface, NULL);
1113 /* must set a flag, to signal subdrivers */
1114 serial->disconnected = 1;
1115 mutex_unlock(&serial->disc_mutex);
1116
1117 for (i = 0; i < serial->num_ports; ++i) {
1118 port = serial->port[i];
1119 if (port) {
1120 struct tty_struct *tty = tty_port_tty_get(&port->port);
1121 if (tty) {
1122 tty_vhangup(tty);
1123 tty_kref_put(tty);
1124 }
1125 kill_traffic(port);
1126 cancel_work_sync(&port->work);
1127 if (port->dev_state == PORT_REGISTERED) {
1128
1129 /* Make sure the port is bound so that the
1130 * driver's port_remove method is called.
1131 */
1132 if (!port->dev.driver) {
1133 int rc;
1134
1135 port->dev.driver =
1136 &serial->type->driver;
1137 rc = device_bind_driver(&port->dev);
1138 }
1139 port->dev_state = PORT_UNREGISTERING;
1140 device_del(&port->dev);
1141 port->dev_state = PORT_UNREGISTERED;
1142 }
1143 }
1144 }
1145 serial->type->disconnect(serial);
1146
1147 /* let the last holder of this object cause it to be cleaned up */
1148 usb_serial_put(serial);
1149 dev_info(dev, "device disconnected\n");
1150}
1151EXPORT_SYMBOL_GPL(usb_serial_disconnect);
1152
1153int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
1154{
1155 struct usb_serial *serial = usb_get_intfdata(intf);
1156 struct usb_serial_port *port;
1157 int i, r = 0;
1158
1159 serial->suspending = 1;
1160
1161 if (serial->type->suspend) {
1162 r = serial->type->suspend(serial, message);
1163 if (r < 0) {
1164 serial->suspending = 0;
1165 goto err_out;
1166 }
1167 }
1168
1169 for (i = 0; i < serial->num_ports; ++i) {
1170 port = serial->port[i];
1171 if (port)
1172 kill_traffic(port);
1173 }
1174
1175err_out:
1176 return r;
1177}
1178EXPORT_SYMBOL(usb_serial_suspend);
1179
1180int usb_serial_resume(struct usb_interface *intf)
1181{
1182 struct usb_serial *serial = usb_get_intfdata(intf);
1183 int rv;
1184
1185 serial->suspending = 0;
1186 if (serial->type->resume)
1187 rv = serial->type->resume(serial);
1188 else
1189 rv = usb_serial_generic_resume(serial);
1190
1191 return rv;
1192}
1193EXPORT_SYMBOL(usb_serial_resume);
1194
1195static const struct tty_operations serial_ops = {
1196 .open = serial_open,
1197 .close = serial_close,
1198 .write = serial_write,
1199 .hangup = serial_hangup,
1200 .write_room = serial_write_room,
1201 .ioctl = serial_ioctl,
1202 .set_termios = serial_set_termios,
1203 .throttle = serial_throttle,
1204 .unthrottle = serial_unthrottle,
1205 .break_ctl = serial_break,
1206 .chars_in_buffer = serial_chars_in_buffer,
1207 .tiocmget = serial_tiocmget,
1208 .tiocmset = serial_tiocmset,
1209 .get_icount = serial_get_icount,
1210 .cleanup = serial_cleanup,
1211 .install = serial_install,
1212 .proc_fops = &serial_proc_fops,
1213};
1214
1215
1216struct tty_driver *usb_serial_tty_driver;
1217
1218static int __init usb_serial_init(void)
1219{
1220 int i;
1221 int result;
1222
1223 usb_serial_tty_driver = alloc_tty_driver(SERIAL_TTY_MINORS);
1224 if (!usb_serial_tty_driver)
1225 return -ENOMEM;
1226
1227 /* Initialize our global data */
1228 for (i = 0; i < SERIAL_TTY_MINORS; ++i)
1229 serial_table[i] = NULL;
1230
1231 result = bus_register(&usb_serial_bus_type);
1232 if (result) {
1233 printk(KERN_ERR "usb-serial: %s - registering bus driver "
1234 "failed\n", __func__);
1235 goto exit_bus;
1236 }
1237
1238 usb_serial_tty_driver->owner = THIS_MODULE;
1239 usb_serial_tty_driver->driver_name = "usbserial";
1240 usb_serial_tty_driver->name = "ttyUSB";
1241 usb_serial_tty_driver->major = SERIAL_TTY_MAJOR;
1242 usb_serial_tty_driver->minor_start = 0;
1243 usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1244 usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1245 usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
1246 TTY_DRIVER_DYNAMIC_DEV;
1247 usb_serial_tty_driver->init_termios = tty_std_termios;
1248 usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
1249 | HUPCL | CLOCAL;
1250 usb_serial_tty_driver->init_termios.c_ispeed = 9600;
1251 usb_serial_tty_driver->init_termios.c_ospeed = 9600;
1252 tty_set_operations(usb_serial_tty_driver, &serial_ops);
1253 result = tty_register_driver(usb_serial_tty_driver);
1254 if (result) {
1255 printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n",
1256 __func__);
1257 goto exit_reg_driver;
1258 }
1259
1260 /* register the USB driver */
1261 result = usb_register(&usb_serial_driver);
1262 if (result < 0) {
1263 printk(KERN_ERR "usb-serial: %s - usb_register failed\n",
1264 __func__);
1265 goto exit_tty;
1266 }
1267
1268 /* register the generic driver, if we should */
1269 result = usb_serial_generic_register(debug);
1270 if (result < 0) {
1271 printk(KERN_ERR "usb-serial: %s - registering generic "
1272 "driver failed\n", __func__);
1273 goto exit_generic;
1274 }
1275
1276 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
1277
1278 return result;
1279
1280exit_generic:
1281 usb_deregister(&usb_serial_driver);
1282
1283exit_tty:
1284 tty_unregister_driver(usb_serial_tty_driver);
1285
1286exit_reg_driver:
1287 bus_unregister(&usb_serial_bus_type);
1288
1289exit_bus:
1290 printk(KERN_ERR "usb-serial: %s - returning with error %d\n",
1291 __func__, result);
1292 put_tty_driver(usb_serial_tty_driver);
1293 return result;
1294}
1295
1296
1297static void __exit usb_serial_exit(void)
1298{
1299 usb_serial_console_exit();
1300
1301 usb_serial_generic_deregister();
1302
1303 usb_deregister(&usb_serial_driver);
1304 tty_unregister_driver(usb_serial_tty_driver);
1305 put_tty_driver(usb_serial_tty_driver);
1306 bus_unregister(&usb_serial_bus_type);
1307}
1308
1309
1310module_init(usb_serial_init);
1311module_exit(usb_serial_exit);
1312
1313#define set_to_generic_if_null(type, function) \
1314 do { \
1315 if (!type->function) { \
1316 type->function = usb_serial_generic_##function; \
1317 dbg("Had to override the " #function \
1318 " usb serial operation with the generic one.");\
1319 } \
1320 } while (0)
1321
1322static void fixup_generic(struct usb_serial_driver *device)
1323{
1324 set_to_generic_if_null(device, open);
1325 set_to_generic_if_null(device, write);
1326 set_to_generic_if_null(device, close);
1327 set_to_generic_if_null(device, write_room);
1328 set_to_generic_if_null(device, chars_in_buffer);
1329 set_to_generic_if_null(device, read_bulk_callback);
1330 set_to_generic_if_null(device, write_bulk_callback);
1331 set_to_generic_if_null(device, disconnect);
1332 set_to_generic_if_null(device, release);
1333 set_to_generic_if_null(device, process_read_urb);
1334 set_to_generic_if_null(device, prepare_write_buffer);
1335}
1336
1337int usb_serial_register(struct usb_serial_driver *driver)
1338{
1339 /* must be called with BKL held */
1340 int retval;
1341
1342 if (usb_disabled())
1343 return -ENODEV;
1344
1345 fixup_generic(driver);
1346
1347 if (!driver->description)
1348 driver->description = driver->driver.name;
1349 if (!driver->usb_driver) {
1350 WARN(1, "Serial driver %s has no usb_driver\n",
1351 driver->description);
1352 return -EINVAL;
1353 }
1354 driver->usb_driver->supports_autosuspend = 1;
1355
1356 /* Add this device to our list of devices */
1357 mutex_lock(&table_lock);
1358 list_add(&driver->driver_list, &usb_serial_driver_list);
1359
1360 retval = usb_serial_bus_register(driver);
1361 if (retval) {
1362 printk(KERN_ERR "usb-serial: problem %d when registering "
1363 "driver %s\n", retval, driver->description);
1364 list_del(&driver->driver_list);
1365 } else
1366 printk(KERN_INFO "USB Serial support registered for %s\n",
1367 driver->description);
1368
1369 mutex_unlock(&table_lock);
1370 return retval;
1371}
1372EXPORT_SYMBOL_GPL(usb_serial_register);
1373
1374
1375void usb_serial_deregister(struct usb_serial_driver *device)
1376{
1377 /* must be called with BKL held */
1378 printk(KERN_INFO "USB Serial deregistering driver %s\n",
1379 device->description);
1380 mutex_lock(&table_lock);
1381 list_del(&device->driver_list);
1382 usb_serial_bus_deregister(device);
1383 mutex_unlock(&table_lock);
1384}
1385EXPORT_SYMBOL_GPL(usb_serial_deregister);
1386
1387/* Module information */
1388MODULE_AUTHOR(DRIVER_AUTHOR);
1389MODULE_DESCRIPTION(DRIVER_DESC);
1390MODULE_LICENSE("GPL");
1391
1392module_param(debug, bool, S_IRUGO | S_IWUSR);
1393MODULE_PARM_DESC(debug, "Debug enabled or not");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * USB Serial Converter driver
4 *
5 * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com)
6 * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
8 * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
9 *
10 * This driver was originally based on the ACM driver by Armin Fuerst (which was
11 * based on a driver by Brad Keryan)
12 *
13 * See Documentation/usb/usb-serial.rst for more information on using this
14 * driver
15 */
16
17#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18
19#include <linux/kernel.h>
20#include <linux/errno.h>
21#include <linux/init.h>
22#include <linux/slab.h>
23#include <linux/tty.h>
24#include <linux/tty_driver.h>
25#include <linux/tty_flip.h>
26#include <linux/module.h>
27#include <linux/moduleparam.h>
28#include <linux/seq_file.h>
29#include <linux/spinlock.h>
30#include <linux/mutex.h>
31#include <linux/list.h>
32#include <linux/uaccess.h>
33#include <linux/serial.h>
34#include <linux/usb.h>
35#include <linux/usb/serial.h>
36#include <linux/kfifo.h>
37#include <linux/idr.h>
38
39#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
40#define DRIVER_DESC "USB Serial Driver core"
41
42#define USB_SERIAL_TTY_MAJOR 188
43#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */
44
45/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
46 the MODULE_DEVICE_TABLE declarations in each serial driver
47 cause the "hotplug" program to pull in whatever module is necessary
48 via modprobe, and modprobe will load usbserial because the serial
49 drivers depend on it.
50*/
51
52static DEFINE_IDR(serial_minors);
53static DEFINE_MUTEX(table_lock);
54static LIST_HEAD(usb_serial_driver_list);
55
56/*
57 * Look up the serial port structure. If it is found and it hasn't been
58 * disconnected, return with the parent usb_serial structure's disc_mutex held
59 * and its refcount incremented. Otherwise return NULL.
60 */
61struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor)
62{
63 struct usb_serial *serial;
64 struct usb_serial_port *port;
65
66 mutex_lock(&table_lock);
67 port = idr_find(&serial_minors, minor);
68 if (!port)
69 goto exit;
70
71 serial = port->serial;
72 mutex_lock(&serial->disc_mutex);
73 if (serial->disconnected) {
74 mutex_unlock(&serial->disc_mutex);
75 port = NULL;
76 } else {
77 kref_get(&serial->kref);
78 }
79exit:
80 mutex_unlock(&table_lock);
81 return port;
82}
83
84static int allocate_minors(struct usb_serial *serial, int num_ports)
85{
86 struct usb_serial_port *port;
87 unsigned int i, j;
88 int minor;
89
90 dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
91
92 mutex_lock(&table_lock);
93 for (i = 0; i < num_ports; ++i) {
94 port = serial->port[i];
95 minor = idr_alloc(&serial_minors, port, 0,
96 USB_SERIAL_TTY_MINORS, GFP_KERNEL);
97 if (minor < 0)
98 goto error;
99 port->minor = minor;
100 port->port_number = i;
101 }
102 serial->minors_reserved = 1;
103 mutex_unlock(&table_lock);
104 return 0;
105error:
106 /* unwind the already allocated minors */
107 for (j = 0; j < i; ++j)
108 idr_remove(&serial_minors, serial->port[j]->minor);
109 mutex_unlock(&table_lock);
110 return minor;
111}
112
113static void release_minors(struct usb_serial *serial)
114{
115 int i;
116
117 mutex_lock(&table_lock);
118 for (i = 0; i < serial->num_ports; ++i)
119 idr_remove(&serial_minors, serial->port[i]->minor);
120 mutex_unlock(&table_lock);
121 serial->minors_reserved = 0;
122}
123
124int usb_serial_claim_interface(struct usb_serial *serial, struct usb_interface *intf)
125{
126 struct usb_driver *driver = serial->type->usb_driver;
127 int ret;
128
129 if (serial->sibling)
130 return -EBUSY;
131
132 ret = usb_driver_claim_interface(driver, intf, serial);
133 if (ret) {
134 dev_err(&serial->interface->dev,
135 "failed to claim sibling interface: %d\n", ret);
136 return ret;
137 }
138
139 serial->sibling = intf;
140
141 return 0;
142}
143EXPORT_SYMBOL_GPL(usb_serial_claim_interface);
144
145static void release_sibling(struct usb_serial *serial, struct usb_interface *intf)
146{
147 struct usb_driver *driver = serial->type->usb_driver;
148 struct usb_interface *sibling;
149
150 if (!serial->sibling)
151 return;
152
153 if (intf == serial->sibling)
154 sibling = serial->interface;
155 else
156 sibling = serial->sibling;
157
158 usb_set_intfdata(sibling, NULL);
159 usb_driver_release_interface(driver, sibling);
160}
161
162static void destroy_serial(struct kref *kref)
163{
164 struct usb_serial *serial;
165 struct usb_serial_port *port;
166 int i;
167
168 serial = to_usb_serial(kref);
169
170 /* return the minor range that this device had */
171 if (serial->minors_reserved)
172 release_minors(serial);
173
174 if (serial->attached && serial->type->release)
175 serial->type->release(serial);
176
177 /* Now that nothing is using the ports, they can be freed */
178 for (i = 0; i < serial->num_port_pointers; ++i) {
179 port = serial->port[i];
180 if (port) {
181 port->serial = NULL;
182 put_device(&port->dev);
183 }
184 }
185
186 usb_put_intf(serial->interface);
187 usb_put_dev(serial->dev);
188 kfree(serial);
189}
190
191void usb_serial_put(struct usb_serial *serial)
192{
193 kref_put(&serial->kref, destroy_serial);
194}
195
196/*****************************************************************************
197 * Driver tty interface functions
198 *****************************************************************************/
199
200/**
201 * serial_install - install tty
202 * @driver: the driver (USB in our case)
203 * @tty: the tty being created
204 *
205 * Initialise the termios structure for this tty. We use the default
206 * USB serial settings but permit them to be overridden by
207 * serial->type->init_termios on first open.
208 *
209 * This is the first place a new tty gets used. Hence this is where we
210 * acquire references to the usb_serial structure and the driver module,
211 * where we store a pointer to the port. All these actions are reversed
212 * in serial_cleanup().
213 */
214static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
215{
216 int idx = tty->index;
217 struct usb_serial *serial;
218 struct usb_serial_port *port;
219 bool init_termios;
220 int retval = -ENODEV;
221
222 port = usb_serial_port_get_by_minor(idx);
223 if (!port)
224 return retval;
225
226 serial = port->serial;
227 if (!try_module_get(serial->type->driver.owner))
228 goto err_put_serial;
229
230 init_termios = (driver->termios[idx] == NULL);
231
232 retval = tty_standard_install(driver, tty);
233 if (retval)
234 goto err_put_module;
235
236 mutex_unlock(&serial->disc_mutex);
237
238 /* allow the driver to update the initial settings */
239 if (init_termios && serial->type->init_termios)
240 serial->type->init_termios(tty);
241
242 tty->driver_data = port;
243
244 return retval;
245
246err_put_module:
247 module_put(serial->type->driver.owner);
248err_put_serial:
249 usb_serial_put(serial);
250 mutex_unlock(&serial->disc_mutex);
251 return retval;
252}
253
254static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
255{
256 struct usb_serial_port *port =
257 container_of(tport, struct usb_serial_port, port);
258 struct usb_serial *serial = port->serial;
259 int retval;
260
261 mutex_lock(&serial->disc_mutex);
262 if (serial->disconnected) {
263 retval = -ENODEV;
264 goto out_unlock;
265 }
266
267 retval = usb_autopm_get_interface(serial->interface);
268 if (retval)
269 goto out_unlock;
270
271 retval = port->serial->type->open(tty, port);
272 if (retval)
273 usb_autopm_put_interface(serial->interface);
274out_unlock:
275 mutex_unlock(&serial->disc_mutex);
276
277 if (retval < 0)
278 retval = usb_translate_errors(retval);
279
280 return retval;
281}
282
283static int serial_open(struct tty_struct *tty, struct file *filp)
284{
285 struct usb_serial_port *port = tty->driver_data;
286
287 dev_dbg(&port->dev, "%s\n", __func__);
288
289 return tty_port_open(&port->port, tty, filp);
290}
291
292/**
293 * serial_port_shutdown - shut down hardware
294 * @tport: tty port to shut down
295 *
296 * Shut down a USB serial port. Serialized against activate by the
297 * tport mutex and kept to matching open/close pairs
298 * of calls by the tty-port initialized flag.
299 *
300 * Not called if tty is console.
301 */
302static void serial_port_shutdown(struct tty_port *tport)
303{
304 struct usb_serial_port *port =
305 container_of(tport, struct usb_serial_port, port);
306 struct usb_serial_driver *drv = port->serial->type;
307
308 if (drv->close)
309 drv->close(port);
310
311 usb_autopm_put_interface(port->serial->interface);
312}
313
314static void serial_hangup(struct tty_struct *tty)
315{
316 struct usb_serial_port *port = tty->driver_data;
317
318 dev_dbg(&port->dev, "%s\n", __func__);
319
320 tty_port_hangup(&port->port);
321}
322
323static void serial_close(struct tty_struct *tty, struct file *filp)
324{
325 struct usb_serial_port *port = tty->driver_data;
326
327 dev_dbg(&port->dev, "%s\n", __func__);
328
329 tty_port_close(&port->port, tty, filp);
330}
331
332/**
333 * serial_cleanup - free resources post close/hangup
334 * @tty: tty to clean up
335 *
336 * Do the resource freeing and refcount dropping for the port.
337 * Avoid freeing the console.
338 *
339 * Called asynchronously after the last tty kref is dropped.
340 */
341static void serial_cleanup(struct tty_struct *tty)
342{
343 struct usb_serial_port *port = tty->driver_data;
344 struct usb_serial *serial;
345 struct module *owner;
346
347 dev_dbg(&port->dev, "%s\n", __func__);
348
349 /* The console is magical. Do not hang up the console hardware
350 * or there will be tears.
351 */
352 if (port->port.console)
353 return;
354
355 tty->driver_data = NULL;
356
357 serial = port->serial;
358 owner = serial->type->driver.owner;
359
360 usb_serial_put(serial);
361 module_put(owner);
362}
363
364static ssize_t serial_write(struct tty_struct *tty, const u8 *buf, size_t count)
365{
366 struct usb_serial_port *port = tty->driver_data;
367 int retval = -ENODEV;
368
369 if (port->serial->dev->state == USB_STATE_NOTATTACHED)
370 goto exit;
371
372 dev_dbg(&port->dev, "%s - %zu byte(s)\n", __func__, count);
373
374 retval = port->serial->type->write(tty, port, buf, count);
375 if (retval < 0)
376 retval = usb_translate_errors(retval);
377exit:
378 return retval;
379}
380
381static unsigned int serial_write_room(struct tty_struct *tty)
382{
383 struct usb_serial_port *port = tty->driver_data;
384
385 dev_dbg(&port->dev, "%s\n", __func__);
386
387 return port->serial->type->write_room(tty);
388}
389
390static unsigned int serial_chars_in_buffer(struct tty_struct *tty)
391{
392 struct usb_serial_port *port = tty->driver_data;
393 struct usb_serial *serial = port->serial;
394
395 dev_dbg(&port->dev, "%s\n", __func__);
396
397 if (serial->disconnected)
398 return 0;
399
400 return serial->type->chars_in_buffer(tty);
401}
402
403static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
404{
405 struct usb_serial_port *port = tty->driver_data;
406 struct usb_serial *serial = port->serial;
407
408 dev_dbg(&port->dev, "%s\n", __func__);
409
410 if (!port->serial->type->wait_until_sent)
411 return;
412
413 mutex_lock(&serial->disc_mutex);
414 if (!serial->disconnected)
415 port->serial->type->wait_until_sent(tty, timeout);
416 mutex_unlock(&serial->disc_mutex);
417}
418
419static void serial_throttle(struct tty_struct *tty)
420{
421 struct usb_serial_port *port = tty->driver_data;
422
423 dev_dbg(&port->dev, "%s\n", __func__);
424
425 if (port->serial->type->throttle)
426 port->serial->type->throttle(tty);
427}
428
429static void serial_unthrottle(struct tty_struct *tty)
430{
431 struct usb_serial_port *port = tty->driver_data;
432
433 dev_dbg(&port->dev, "%s\n", __func__);
434
435 if (port->serial->type->unthrottle)
436 port->serial->type->unthrottle(tty);
437}
438
439static int serial_get_serial(struct tty_struct *tty, struct serial_struct *ss)
440{
441 struct usb_serial_port *port = tty->driver_data;
442 struct tty_port *tport = &port->port;
443 unsigned int close_delay, closing_wait;
444
445 mutex_lock(&tport->mutex);
446
447 close_delay = jiffies_to_msecs(tport->close_delay) / 10;
448 closing_wait = tport->closing_wait;
449 if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
450 closing_wait = jiffies_to_msecs(closing_wait) / 10;
451
452 ss->line = port->minor;
453 ss->close_delay = close_delay;
454 ss->closing_wait = closing_wait;
455
456 if (port->serial->type->get_serial)
457 port->serial->type->get_serial(tty, ss);
458
459 mutex_unlock(&tport->mutex);
460
461 return 0;
462}
463
464static int serial_set_serial(struct tty_struct *tty, struct serial_struct *ss)
465{
466 struct usb_serial_port *port = tty->driver_data;
467 struct tty_port *tport = &port->port;
468 unsigned int close_delay, closing_wait;
469 int ret = 0;
470
471 close_delay = msecs_to_jiffies(ss->close_delay * 10);
472 closing_wait = ss->closing_wait;
473 if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
474 closing_wait = msecs_to_jiffies(closing_wait * 10);
475
476 mutex_lock(&tport->mutex);
477
478 if (!capable(CAP_SYS_ADMIN)) {
479 if (close_delay != tport->close_delay ||
480 closing_wait != tport->closing_wait) {
481 ret = -EPERM;
482 goto out_unlock;
483 }
484 }
485
486 if (port->serial->type->set_serial) {
487 ret = port->serial->type->set_serial(tty, ss);
488 if (ret)
489 goto out_unlock;
490 }
491
492 tport->close_delay = close_delay;
493 tport->closing_wait = closing_wait;
494out_unlock:
495 mutex_unlock(&tport->mutex);
496
497 return ret;
498}
499
500static int serial_ioctl(struct tty_struct *tty,
501 unsigned int cmd, unsigned long arg)
502{
503 struct usb_serial_port *port = tty->driver_data;
504 int retval = -ENOIOCTLCMD;
505
506 dev_dbg(&port->dev, "%s - cmd 0x%04x\n", __func__, cmd);
507
508 switch (cmd) {
509 case TIOCMIWAIT:
510 if (port->serial->type->tiocmiwait)
511 retval = port->serial->type->tiocmiwait(tty, arg);
512 break;
513 default:
514 if (port->serial->type->ioctl)
515 retval = port->serial->type->ioctl(tty, cmd, arg);
516 }
517
518 return retval;
519}
520
521static void serial_set_termios(struct tty_struct *tty,
522 const struct ktermios *old)
523{
524 struct usb_serial_port *port = tty->driver_data;
525
526 dev_dbg(&port->dev, "%s\n", __func__);
527
528 if (port->serial->type->set_termios)
529 port->serial->type->set_termios(tty, port, old);
530 else
531 tty_termios_copy_hw(&tty->termios, old);
532}
533
534static int serial_break(struct tty_struct *tty, int break_state)
535{
536 struct usb_serial_port *port = tty->driver_data;
537
538 dev_dbg(&port->dev, "%s\n", __func__);
539
540 if (port->serial->type->break_ctl)
541 return port->serial->type->break_ctl(tty, break_state);
542
543 return -ENOTTY;
544}
545
546static int serial_proc_show(struct seq_file *m, void *v)
547{
548 struct usb_serial *serial;
549 struct usb_serial_port *port;
550 int i;
551 char tmp[40];
552
553 seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
554 for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
555 port = usb_serial_port_get_by_minor(i);
556 if (port == NULL)
557 continue;
558 serial = port->serial;
559
560 seq_printf(m, "%d:", i);
561 if (serial->type->driver.owner)
562 seq_printf(m, " module:%s",
563 module_name(serial->type->driver.owner));
564 seq_printf(m, " name:\"%s\"",
565 serial->type->description);
566 seq_printf(m, " vendor:%04x product:%04x",
567 le16_to_cpu(serial->dev->descriptor.idVendor),
568 le16_to_cpu(serial->dev->descriptor.idProduct));
569 seq_printf(m, " num_ports:%d", serial->num_ports);
570 seq_printf(m, " port:%d", port->port_number);
571 usb_make_path(serial->dev, tmp, sizeof(tmp));
572 seq_printf(m, " path:%s", tmp);
573
574 seq_putc(m, '\n');
575 usb_serial_put(serial);
576 mutex_unlock(&serial->disc_mutex);
577 }
578 return 0;
579}
580
581static int serial_tiocmget(struct tty_struct *tty)
582{
583 struct usb_serial_port *port = tty->driver_data;
584
585 dev_dbg(&port->dev, "%s\n", __func__);
586
587 if (port->serial->type->tiocmget)
588 return port->serial->type->tiocmget(tty);
589 return -ENOTTY;
590}
591
592static int serial_tiocmset(struct tty_struct *tty,
593 unsigned int set, unsigned int clear)
594{
595 struct usb_serial_port *port = tty->driver_data;
596
597 dev_dbg(&port->dev, "%s\n", __func__);
598
599 if (port->serial->type->tiocmset)
600 return port->serial->type->tiocmset(tty, set, clear);
601 return -ENOTTY;
602}
603
604static int serial_get_icount(struct tty_struct *tty,
605 struct serial_icounter_struct *icount)
606{
607 struct usb_serial_port *port = tty->driver_data;
608
609 dev_dbg(&port->dev, "%s\n", __func__);
610
611 if (port->serial->type->get_icount)
612 return port->serial->type->get_icount(tty, icount);
613 return -ENOTTY;
614}
615
616/*
617 * We would be calling tty_wakeup here, but unfortunately some line
618 * disciplines have an annoying habit of calling tty->write from
619 * the write wakeup callback (e.g. n_hdlc.c).
620 */
621void usb_serial_port_softint(struct usb_serial_port *port)
622{
623 schedule_work(&port->work);
624}
625EXPORT_SYMBOL_GPL(usb_serial_port_softint);
626
627static void usb_serial_port_work(struct work_struct *work)
628{
629 struct usb_serial_port *port =
630 container_of(work, struct usb_serial_port, work);
631
632 tty_port_tty_wakeup(&port->port);
633}
634
635static void usb_serial_port_poison_urbs(struct usb_serial_port *port)
636{
637 int i;
638
639 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
640 usb_poison_urb(port->read_urbs[i]);
641 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
642 usb_poison_urb(port->write_urbs[i]);
643
644 usb_poison_urb(port->interrupt_in_urb);
645 usb_poison_urb(port->interrupt_out_urb);
646}
647
648static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port)
649{
650 int i;
651
652 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
653 usb_unpoison_urb(port->read_urbs[i]);
654 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
655 usb_unpoison_urb(port->write_urbs[i]);
656
657 usb_unpoison_urb(port->interrupt_in_urb);
658 usb_unpoison_urb(port->interrupt_out_urb);
659}
660
661static void usb_serial_port_release(struct device *dev)
662{
663 struct usb_serial_port *port = to_usb_serial_port(dev);
664 int i;
665
666 dev_dbg(dev, "%s\n", __func__);
667
668 usb_free_urb(port->interrupt_in_urb);
669 usb_free_urb(port->interrupt_out_urb);
670 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
671 usb_free_urb(port->read_urbs[i]);
672 kfree(port->bulk_in_buffers[i]);
673 }
674 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
675 usb_free_urb(port->write_urbs[i]);
676 kfree(port->bulk_out_buffers[i]);
677 }
678 kfifo_free(&port->write_fifo);
679 kfree(port->interrupt_in_buffer);
680 kfree(port->interrupt_out_buffer);
681 tty_port_destroy(&port->port);
682 kfree(port);
683}
684
685static struct usb_serial *create_serial(struct usb_device *dev,
686 struct usb_interface *interface,
687 struct usb_serial_driver *driver)
688{
689 struct usb_serial *serial;
690
691 serial = kzalloc(sizeof(*serial), GFP_KERNEL);
692 if (!serial)
693 return NULL;
694 serial->dev = usb_get_dev(dev);
695 serial->type = driver;
696 serial->interface = usb_get_intf(interface);
697 kref_init(&serial->kref);
698 mutex_init(&serial->disc_mutex);
699 serial->minors_reserved = 0;
700
701 return serial;
702}
703
704static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
705 struct usb_serial_driver *drv)
706{
707 struct usb_dynid *dynid;
708
709 guard(mutex)(&usb_dynids_lock);
710 list_for_each_entry(dynid, &drv->dynids.list, node) {
711 if (usb_match_one_id(intf, &dynid->id)) {
712 return &dynid->id;
713 }
714 }
715 return NULL;
716}
717
718static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
719 struct usb_interface *intf)
720{
721 const struct usb_device_id *id;
722
723 id = usb_match_id(intf, drv->id_table);
724 if (id) {
725 dev_dbg(&intf->dev, "static descriptor matches\n");
726 goto exit;
727 }
728 id = match_dynamic_id(intf, drv);
729 if (id)
730 dev_dbg(&intf->dev, "dynamic descriptor matches\n");
731exit:
732 return id;
733}
734
735/* Caller must hold table_lock */
736static struct usb_serial_driver *search_serial_device(
737 struct usb_interface *iface)
738{
739 const struct usb_device_id *id = NULL;
740 struct usb_serial_driver *drv;
741 struct usb_driver *driver = to_usb_driver(iface->dev.driver);
742
743 /* Check if the usb id matches a known device */
744 list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
745 if (drv->usb_driver == driver)
746 id = get_iface_id(drv, iface);
747 if (id)
748 return drv;
749 }
750
751 return NULL;
752}
753
754static bool serial_port_carrier_raised(struct tty_port *port)
755{
756 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
757 struct usb_serial_driver *drv = p->serial->type;
758
759 if (drv->carrier_raised)
760 return drv->carrier_raised(p);
761 /* No carrier control - don't block */
762 return true;
763}
764
765static void serial_port_dtr_rts(struct tty_port *port, bool on)
766{
767 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
768 struct usb_serial_driver *drv = p->serial->type;
769
770 if (drv->dtr_rts)
771 drv->dtr_rts(p, on);
772}
773
774static ssize_t port_number_show(struct device *dev,
775 struct device_attribute *attr, char *buf)
776{
777 struct usb_serial_port *port = to_usb_serial_port(dev);
778
779 return sprintf(buf, "%u\n", port->port_number);
780}
781static DEVICE_ATTR_RO(port_number);
782
783static struct attribute *usb_serial_port_attrs[] = {
784 &dev_attr_port_number.attr,
785 NULL
786};
787ATTRIBUTE_GROUPS(usb_serial_port);
788
789static const struct tty_port_operations serial_port_ops = {
790 .carrier_raised = serial_port_carrier_raised,
791 .dtr_rts = serial_port_dtr_rts,
792 .activate = serial_port_activate,
793 .shutdown = serial_port_shutdown,
794};
795
796static void store_endpoint(struct usb_serial *serial,
797 struct usb_serial_endpoints *epds,
798 struct usb_endpoint_descriptor *epd)
799{
800 struct device *dev = &serial->interface->dev;
801 u8 addr = epd->bEndpointAddress;
802
803 if (usb_endpoint_is_bulk_in(epd)) {
804 if (epds->num_bulk_in == ARRAY_SIZE(epds->bulk_in))
805 return;
806 dev_dbg(dev, "found bulk in endpoint %02x\n", addr);
807 epds->bulk_in[epds->num_bulk_in++] = epd;
808 } else if (usb_endpoint_is_bulk_out(epd)) {
809 if (epds->num_bulk_out == ARRAY_SIZE(epds->bulk_out))
810 return;
811 dev_dbg(dev, "found bulk out endpoint %02x\n", addr);
812 epds->bulk_out[epds->num_bulk_out++] = epd;
813 } else if (usb_endpoint_is_int_in(epd)) {
814 if (epds->num_interrupt_in == ARRAY_SIZE(epds->interrupt_in))
815 return;
816 dev_dbg(dev, "found interrupt in endpoint %02x\n", addr);
817 epds->interrupt_in[epds->num_interrupt_in++] = epd;
818 } else if (usb_endpoint_is_int_out(epd)) {
819 if (epds->num_interrupt_out == ARRAY_SIZE(epds->interrupt_out))
820 return;
821 dev_dbg(dev, "found interrupt out endpoint %02x\n", addr);
822 epds->interrupt_out[epds->num_interrupt_out++] = epd;
823 }
824}
825
826static void find_endpoints(struct usb_serial *serial,
827 struct usb_serial_endpoints *epds,
828 struct usb_interface *intf)
829{
830 struct usb_host_interface *iface_desc;
831 struct usb_endpoint_descriptor *epd;
832 unsigned int i;
833
834 iface_desc = intf->cur_altsetting;
835 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
836 epd = &iface_desc->endpoint[i].desc;
837 store_endpoint(serial, epds, epd);
838 }
839}
840
841static int setup_port_bulk_in(struct usb_serial_port *port,
842 struct usb_endpoint_descriptor *epd)
843{
844 struct usb_serial_driver *type = port->serial->type;
845 struct usb_device *udev = port->serial->dev;
846 int buffer_size;
847 int i;
848
849 buffer_size = max_t(int, type->bulk_in_size, usb_endpoint_maxp(epd));
850 port->bulk_in_size = buffer_size;
851 port->bulk_in_endpointAddress = epd->bEndpointAddress;
852
853 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
854 set_bit(i, &port->read_urbs_free);
855 port->read_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
856 if (!port->read_urbs[i])
857 return -ENOMEM;
858 port->bulk_in_buffers[i] = kmalloc(buffer_size, GFP_KERNEL);
859 if (!port->bulk_in_buffers[i])
860 return -ENOMEM;
861 usb_fill_bulk_urb(port->read_urbs[i], udev,
862 usb_rcvbulkpipe(udev, epd->bEndpointAddress),
863 port->bulk_in_buffers[i], buffer_size,
864 type->read_bulk_callback, port);
865 }
866
867 port->read_urb = port->read_urbs[0];
868 port->bulk_in_buffer = port->bulk_in_buffers[0];
869
870 return 0;
871}
872
873static int setup_port_bulk_out(struct usb_serial_port *port,
874 struct usb_endpoint_descriptor *epd)
875{
876 struct usb_serial_driver *type = port->serial->type;
877 struct usb_device *udev = port->serial->dev;
878 int buffer_size;
879 int i;
880
881 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
882 return -ENOMEM;
883 if (type->bulk_out_size)
884 buffer_size = type->bulk_out_size;
885 else
886 buffer_size = usb_endpoint_maxp(epd);
887 port->bulk_out_size = buffer_size;
888 port->bulk_out_endpointAddress = epd->bEndpointAddress;
889
890 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
891 set_bit(i, &port->write_urbs_free);
892 port->write_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
893 if (!port->write_urbs[i])
894 return -ENOMEM;
895 port->bulk_out_buffers[i] = kmalloc(buffer_size, GFP_KERNEL);
896 if (!port->bulk_out_buffers[i])
897 return -ENOMEM;
898 usb_fill_bulk_urb(port->write_urbs[i], udev,
899 usb_sndbulkpipe(udev, epd->bEndpointAddress),
900 port->bulk_out_buffers[i], buffer_size,
901 type->write_bulk_callback, port);
902 }
903
904 port->write_urb = port->write_urbs[0];
905 port->bulk_out_buffer = port->bulk_out_buffers[0];
906
907 return 0;
908}
909
910static int setup_port_interrupt_in(struct usb_serial_port *port,
911 struct usb_endpoint_descriptor *epd)
912{
913 struct usb_serial_driver *type = port->serial->type;
914 struct usb_device *udev = port->serial->dev;
915 int buffer_size;
916
917 port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
918 if (!port->interrupt_in_urb)
919 return -ENOMEM;
920 buffer_size = usb_endpoint_maxp(epd);
921 port->interrupt_in_endpointAddress = epd->bEndpointAddress;
922 port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
923 if (!port->interrupt_in_buffer)
924 return -ENOMEM;
925 usb_fill_int_urb(port->interrupt_in_urb, udev,
926 usb_rcvintpipe(udev, epd->bEndpointAddress),
927 port->interrupt_in_buffer, buffer_size,
928 type->read_int_callback, port,
929 epd->bInterval);
930
931 return 0;
932}
933
934static int setup_port_interrupt_out(struct usb_serial_port *port,
935 struct usb_endpoint_descriptor *epd)
936{
937 struct usb_serial_driver *type = port->serial->type;
938 struct usb_device *udev = port->serial->dev;
939 int buffer_size;
940
941 port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
942 if (!port->interrupt_out_urb)
943 return -ENOMEM;
944 buffer_size = usb_endpoint_maxp(epd);
945 port->interrupt_out_size = buffer_size;
946 port->interrupt_out_endpointAddress = epd->bEndpointAddress;
947 port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
948 if (!port->interrupt_out_buffer)
949 return -ENOMEM;
950 usb_fill_int_urb(port->interrupt_out_urb, udev,
951 usb_sndintpipe(udev, epd->bEndpointAddress),
952 port->interrupt_out_buffer, buffer_size,
953 type->write_int_callback, port,
954 epd->bInterval);
955
956 return 0;
957}
958
959static int usb_serial_probe(struct usb_interface *interface,
960 const struct usb_device_id *id)
961{
962 struct device *ddev = &interface->dev;
963 struct usb_device *dev = interface_to_usbdev(interface);
964 struct usb_serial *serial = NULL;
965 struct usb_serial_port *port;
966 struct usb_serial_endpoints *epds;
967 struct usb_serial_driver *type = NULL;
968 int retval;
969 int i;
970 int num_ports = 0;
971 unsigned char max_endpoints;
972
973 mutex_lock(&table_lock);
974 type = search_serial_device(interface);
975 if (!type) {
976 mutex_unlock(&table_lock);
977 dev_dbg(ddev, "none matched\n");
978 return -ENODEV;
979 }
980
981 if (!try_module_get(type->driver.owner)) {
982 mutex_unlock(&table_lock);
983 dev_err(ddev, "module get failed, exiting\n");
984 return -EIO;
985 }
986 mutex_unlock(&table_lock);
987
988 serial = create_serial(dev, interface, type);
989 if (!serial) {
990 retval = -ENOMEM;
991 goto err_put_module;
992 }
993
994 /* if this device type has a probe function, call it */
995 if (type->probe) {
996 const struct usb_device_id *id;
997
998 id = get_iface_id(type, interface);
999 retval = type->probe(serial, id);
1000
1001 if (retval) {
1002 dev_dbg(ddev, "sub driver rejected device\n");
1003 goto err_release_sibling;
1004 }
1005 }
1006
1007 /* descriptor matches, let's find the endpoints needed */
1008 epds = kzalloc(sizeof(*epds), GFP_KERNEL);
1009 if (!epds) {
1010 retval = -ENOMEM;
1011 goto err_release_sibling;
1012 }
1013
1014 find_endpoints(serial, epds, interface);
1015 if (serial->sibling)
1016 find_endpoints(serial, epds, serial->sibling);
1017
1018 if (epds->num_bulk_in < type->num_bulk_in ||
1019 epds->num_bulk_out < type->num_bulk_out ||
1020 epds->num_interrupt_in < type->num_interrupt_in ||
1021 epds->num_interrupt_out < type->num_interrupt_out) {
1022 dev_err(ddev, "required endpoints missing\n");
1023 retval = -ENODEV;
1024 goto err_free_epds;
1025 }
1026
1027 if (type->calc_num_ports) {
1028 retval = type->calc_num_ports(serial, epds);
1029 if (retval < 0)
1030 goto err_free_epds;
1031 num_ports = retval;
1032 }
1033
1034 if (!num_ports)
1035 num_ports = type->num_ports;
1036
1037 if (num_ports > MAX_NUM_PORTS) {
1038 dev_warn(ddev, "too many ports requested: %d\n", num_ports);
1039 num_ports = MAX_NUM_PORTS;
1040 }
1041
1042 serial->num_ports = (unsigned char)num_ports;
1043 serial->num_bulk_in = epds->num_bulk_in;
1044 serial->num_bulk_out = epds->num_bulk_out;
1045 serial->num_interrupt_in = epds->num_interrupt_in;
1046 serial->num_interrupt_out = epds->num_interrupt_out;
1047
1048 /* found all that we need */
1049 dev_info(ddev, "%s converter detected\n", type->description);
1050
1051 /* create our ports, we need as many as the max endpoints */
1052 /* we don't use num_ports here because some devices have more
1053 endpoint pairs than ports */
1054 max_endpoints = max(epds->num_bulk_in, epds->num_bulk_out);
1055 max_endpoints = max(max_endpoints, epds->num_interrupt_in);
1056 max_endpoints = max(max_endpoints, epds->num_interrupt_out);
1057 max_endpoints = max(max_endpoints, serial->num_ports);
1058 serial->num_port_pointers = max_endpoints;
1059
1060 dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
1061 for (i = 0; i < max_endpoints; ++i) {
1062 port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
1063 if (!port) {
1064 retval = -ENOMEM;
1065 goto err_free_epds;
1066 }
1067 tty_port_init(&port->port);
1068 port->port.ops = &serial_port_ops;
1069 port->serial = serial;
1070 spin_lock_init(&port->lock);
1071 /* Keep this for private driver use for the moment but
1072 should probably go away */
1073 INIT_WORK(&port->work, usb_serial_port_work);
1074 serial->port[i] = port;
1075 port->dev.parent = &interface->dev;
1076 port->dev.driver = NULL;
1077 port->dev.bus = &usb_serial_bus_type;
1078 port->dev.release = &usb_serial_port_release;
1079 port->dev.groups = usb_serial_port_groups;
1080 device_initialize(&port->dev);
1081 }
1082
1083 /* set up the endpoint information */
1084 for (i = 0; i < epds->num_bulk_in; ++i) {
1085 retval = setup_port_bulk_in(serial->port[i], epds->bulk_in[i]);
1086 if (retval)
1087 goto err_free_epds;
1088 }
1089
1090 for (i = 0; i < epds->num_bulk_out; ++i) {
1091 retval = setup_port_bulk_out(serial->port[i],
1092 epds->bulk_out[i]);
1093 if (retval)
1094 goto err_free_epds;
1095 }
1096
1097 if (serial->type->read_int_callback) {
1098 for (i = 0; i < epds->num_interrupt_in; ++i) {
1099 retval = setup_port_interrupt_in(serial->port[i],
1100 epds->interrupt_in[i]);
1101 if (retval)
1102 goto err_free_epds;
1103 }
1104 } else if (epds->num_interrupt_in) {
1105 dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
1106 }
1107
1108 if (serial->type->write_int_callback) {
1109 for (i = 0; i < epds->num_interrupt_out; ++i) {
1110 retval = setup_port_interrupt_out(serial->port[i],
1111 epds->interrupt_out[i]);
1112 if (retval)
1113 goto err_free_epds;
1114 }
1115 } else if (epds->num_interrupt_out) {
1116 dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
1117 }
1118
1119 usb_set_intfdata(interface, serial);
1120
1121 /* if this device type has an attach function, call it */
1122 if (type->attach) {
1123 retval = type->attach(serial);
1124 if (retval < 0)
1125 goto err_free_epds;
1126 serial->attached = 1;
1127 if (retval > 0) {
1128 /* quietly accept this device, but don't bind to a
1129 serial port as it's about to disappear */
1130 serial->num_ports = 0;
1131 goto exit;
1132 }
1133 } else {
1134 serial->attached = 1;
1135 }
1136
1137 retval = allocate_minors(serial, num_ports);
1138 if (retval) {
1139 dev_err(ddev, "No more free serial minor numbers\n");
1140 goto err_free_epds;
1141 }
1142
1143 /* register all of the individual ports with the driver core */
1144 for (i = 0; i < num_ports; ++i) {
1145 port = serial->port[i];
1146 dev_set_name(&port->dev, "ttyUSB%d", port->minor);
1147 dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
1148 device_enable_async_suspend(&port->dev);
1149
1150 retval = device_add(&port->dev);
1151 if (retval)
1152 dev_err(ddev, "Error registering port device, continuing\n");
1153 }
1154
1155 if (num_ports > 0)
1156 usb_serial_console_init(serial->port[0]->minor);
1157exit:
1158 kfree(epds);
1159 module_put(type->driver.owner);
1160 return 0;
1161
1162err_free_epds:
1163 kfree(epds);
1164err_release_sibling:
1165 release_sibling(serial, interface);
1166 usb_serial_put(serial);
1167err_put_module:
1168 module_put(type->driver.owner);
1169
1170 return retval;
1171}
1172
1173static void usb_serial_disconnect(struct usb_interface *interface)
1174{
1175 int i;
1176 struct usb_serial *serial = usb_get_intfdata(interface);
1177 struct device *dev = &interface->dev;
1178 struct usb_serial_port *port;
1179 struct tty_struct *tty;
1180
1181 /* sibling interface is cleaning up */
1182 if (!serial)
1183 return;
1184
1185 usb_serial_console_disconnect(serial);
1186
1187 mutex_lock(&serial->disc_mutex);
1188 /* must set a flag, to signal subdrivers */
1189 serial->disconnected = 1;
1190 mutex_unlock(&serial->disc_mutex);
1191
1192 for (i = 0; i < serial->num_ports; ++i) {
1193 port = serial->port[i];
1194 tty = tty_port_tty_get(&port->port);
1195 if (tty) {
1196 tty_vhangup(tty);
1197 tty_kref_put(tty);
1198 }
1199 usb_serial_port_poison_urbs(port);
1200 wake_up_interruptible(&port->port.delta_msr_wait);
1201 cancel_work_sync(&port->work);
1202 if (device_is_registered(&port->dev))
1203 device_del(&port->dev);
1204 }
1205 if (serial->type->disconnect)
1206 serial->type->disconnect(serial);
1207
1208 release_sibling(serial, interface);
1209
1210 /* let the last holder of this object cause it to be cleaned up */
1211 usb_serial_put(serial);
1212 dev_info(dev, "device disconnected\n");
1213}
1214
1215int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
1216{
1217 struct usb_serial *serial = usb_get_intfdata(intf);
1218 int i, r;
1219
1220 /* suspend when called for first sibling interface */
1221 if (serial->suspend_count++)
1222 return 0;
1223
1224 /*
1225 * serial->type->suspend() MUST return 0 in system sleep context,
1226 * otherwise, the resume callback has to recover device from
1227 * previous suspend failure.
1228 */
1229 if (serial->type->suspend) {
1230 r = serial->type->suspend(serial, message);
1231 if (r < 0) {
1232 serial->suspend_count--;
1233 return r;
1234 }
1235 }
1236
1237 for (i = 0; i < serial->num_ports; ++i)
1238 usb_serial_port_poison_urbs(serial->port[i]);
1239
1240 return 0;
1241}
1242EXPORT_SYMBOL(usb_serial_suspend);
1243
1244static void usb_serial_unpoison_port_urbs(struct usb_serial *serial)
1245{
1246 int i;
1247
1248 for (i = 0; i < serial->num_ports; ++i)
1249 usb_serial_port_unpoison_urbs(serial->port[i]);
1250}
1251
1252int usb_serial_resume(struct usb_interface *intf)
1253{
1254 struct usb_serial *serial = usb_get_intfdata(intf);
1255 int rv;
1256
1257 /* resume when called for last sibling interface */
1258 if (--serial->suspend_count)
1259 return 0;
1260
1261 usb_serial_unpoison_port_urbs(serial);
1262
1263 if (serial->type->resume)
1264 rv = serial->type->resume(serial);
1265 else
1266 rv = usb_serial_generic_resume(serial);
1267
1268 return rv;
1269}
1270EXPORT_SYMBOL(usb_serial_resume);
1271
1272static int usb_serial_reset_resume(struct usb_interface *intf)
1273{
1274 struct usb_serial *serial = usb_get_intfdata(intf);
1275 int rv;
1276
1277 /* resume when called for last sibling interface */
1278 if (--serial->suspend_count)
1279 return 0;
1280
1281 usb_serial_unpoison_port_urbs(serial);
1282
1283 if (serial->type->reset_resume) {
1284 rv = serial->type->reset_resume(serial);
1285 } else {
1286 rv = -EOPNOTSUPP;
1287 intf->needs_binding = 1;
1288 }
1289
1290 return rv;
1291}
1292
1293static const struct tty_operations serial_ops = {
1294 .open = serial_open,
1295 .close = serial_close,
1296 .write = serial_write,
1297 .hangup = serial_hangup,
1298 .write_room = serial_write_room,
1299 .ioctl = serial_ioctl,
1300 .set_termios = serial_set_termios,
1301 .throttle = serial_throttle,
1302 .unthrottle = serial_unthrottle,
1303 .break_ctl = serial_break,
1304 .chars_in_buffer = serial_chars_in_buffer,
1305 .wait_until_sent = serial_wait_until_sent,
1306 .tiocmget = serial_tiocmget,
1307 .tiocmset = serial_tiocmset,
1308 .get_icount = serial_get_icount,
1309 .set_serial = serial_set_serial,
1310 .get_serial = serial_get_serial,
1311 .cleanup = serial_cleanup,
1312 .install = serial_install,
1313 .proc_show = serial_proc_show,
1314};
1315
1316
1317struct tty_driver *usb_serial_tty_driver;
1318
1319static int __init usb_serial_init(void)
1320{
1321 int result;
1322
1323 usb_serial_tty_driver = tty_alloc_driver(USB_SERIAL_TTY_MINORS,
1324 TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
1325 if (IS_ERR(usb_serial_tty_driver))
1326 return PTR_ERR(usb_serial_tty_driver);
1327
1328 /* Initialize our global data */
1329 result = bus_register(&usb_serial_bus_type);
1330 if (result) {
1331 pr_err("%s - registering bus driver failed\n", __func__);
1332 goto err_put_driver;
1333 }
1334
1335 usb_serial_tty_driver->driver_name = "usbserial";
1336 usb_serial_tty_driver->name = "ttyUSB";
1337 usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR;
1338 usb_serial_tty_driver->minor_start = 0;
1339 usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1340 usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1341 usb_serial_tty_driver->init_termios = tty_std_termios;
1342 usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
1343 | HUPCL | CLOCAL;
1344 usb_serial_tty_driver->init_termios.c_ispeed = 9600;
1345 usb_serial_tty_driver->init_termios.c_ospeed = 9600;
1346 tty_set_operations(usb_serial_tty_driver, &serial_ops);
1347 result = tty_register_driver(usb_serial_tty_driver);
1348 if (result) {
1349 pr_err("%s - tty_register_driver failed\n", __func__);
1350 goto err_unregister_bus;
1351 }
1352
1353 /* register the generic driver, if we should */
1354 result = usb_serial_generic_register();
1355 if (result < 0) {
1356 pr_err("%s - registering generic driver failed\n", __func__);
1357 goto err_unregister_driver;
1358 }
1359
1360 return result;
1361
1362err_unregister_driver:
1363 tty_unregister_driver(usb_serial_tty_driver);
1364err_unregister_bus:
1365 bus_unregister(&usb_serial_bus_type);
1366err_put_driver:
1367 pr_err("%s - returning with error %d\n", __func__, result);
1368 tty_driver_kref_put(usb_serial_tty_driver);
1369 return result;
1370}
1371
1372
1373static void __exit usb_serial_exit(void)
1374{
1375 usb_serial_console_exit();
1376
1377 usb_serial_generic_deregister();
1378
1379 tty_unregister_driver(usb_serial_tty_driver);
1380 tty_driver_kref_put(usb_serial_tty_driver);
1381 bus_unregister(&usb_serial_bus_type);
1382 idr_destroy(&serial_minors);
1383}
1384
1385
1386module_init(usb_serial_init);
1387module_exit(usb_serial_exit);
1388
1389#define set_to_generic_if_null(type, function) \
1390 do { \
1391 if (!type->function) { \
1392 type->function = usb_serial_generic_##function; \
1393 pr_debug("%s: using generic " #function "\n", \
1394 type->driver.name); \
1395 } \
1396 } while (0)
1397
1398static void usb_serial_operations_init(struct usb_serial_driver *device)
1399{
1400 set_to_generic_if_null(device, open);
1401 set_to_generic_if_null(device, write);
1402 set_to_generic_if_null(device, close);
1403 set_to_generic_if_null(device, write_room);
1404 set_to_generic_if_null(device, chars_in_buffer);
1405 if (device->tx_empty)
1406 set_to_generic_if_null(device, wait_until_sent);
1407 set_to_generic_if_null(device, read_bulk_callback);
1408 set_to_generic_if_null(device, write_bulk_callback);
1409 set_to_generic_if_null(device, process_read_urb);
1410 set_to_generic_if_null(device, prepare_write_buffer);
1411}
1412
1413static int usb_serial_register(struct usb_serial_driver *driver)
1414{
1415 int retval;
1416
1417 if (usb_disabled())
1418 return -ENODEV;
1419
1420 if (!driver->description)
1421 driver->description = driver->driver.name;
1422 if (!driver->usb_driver) {
1423 WARN(1, "Serial driver %s has no usb_driver\n",
1424 driver->description);
1425 return -EINVAL;
1426 }
1427
1428 /* Prevent individual ports from being unbound. */
1429 driver->driver.suppress_bind_attrs = true;
1430
1431 usb_serial_operations_init(driver);
1432
1433 /* Add this device to our list of devices */
1434 mutex_lock(&table_lock);
1435 list_add(&driver->driver_list, &usb_serial_driver_list);
1436
1437 retval = usb_serial_bus_register(driver);
1438 if (retval) {
1439 pr_err("problem %d when registering driver %s\n", retval, driver->description);
1440 list_del(&driver->driver_list);
1441 } else {
1442 pr_info("USB Serial support registered for %s\n", driver->description);
1443 }
1444 mutex_unlock(&table_lock);
1445 return retval;
1446}
1447
1448static void usb_serial_deregister(struct usb_serial_driver *device)
1449{
1450 pr_info("USB Serial deregistering driver %s\n", device->description);
1451
1452 mutex_lock(&table_lock);
1453 list_del(&device->driver_list);
1454 mutex_unlock(&table_lock);
1455
1456 usb_serial_bus_deregister(device);
1457}
1458
1459/**
1460 * __usb_serial_register_drivers - register drivers for a usb-serial module
1461 * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
1462 * @owner: owning module
1463 * @name: name of the usb_driver for this set of @serial_drivers
1464 * @id_table: list of all devices this @serial_drivers set binds to
1465 *
1466 * Registers all the drivers in the @serial_drivers array, and dynamically
1467 * creates a struct usb_driver with the name @name and id_table of @id_table.
1468 */
1469int __usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
1470 struct module *owner, const char *name,
1471 const struct usb_device_id *id_table)
1472{
1473 int rc;
1474 struct usb_driver *udriver;
1475 struct usb_serial_driver * const *sd;
1476
1477 /*
1478 * udriver must be registered before any of the serial drivers,
1479 * because the store_new_id() routine for the serial drivers (in
1480 * bus.c) probes udriver.
1481 *
1482 * Performance hack: We don't want udriver to be probed until
1483 * the serial drivers are registered, because the probe would
1484 * simply fail for lack of a matching serial driver.
1485 * So we leave udriver's id_table set to NULL until we are all set.
1486 *
1487 * Suspend/resume support is implemented in the usb-serial core,
1488 * so fill in the PM-related fields in udriver.
1489 */
1490 udriver = kzalloc(sizeof(*udriver), GFP_KERNEL);
1491 if (!udriver)
1492 return -ENOMEM;
1493
1494 udriver->name = name;
1495 udriver->no_dynamic_id = 1;
1496 udriver->supports_autosuspend = 1;
1497 udriver->suspend = usb_serial_suspend;
1498 udriver->resume = usb_serial_resume;
1499 udriver->probe = usb_serial_probe;
1500 udriver->disconnect = usb_serial_disconnect;
1501
1502 /* we only set the reset_resume field if the serial_driver has one */
1503 for (sd = serial_drivers; *sd; ++sd) {
1504 if ((*sd)->reset_resume) {
1505 udriver->reset_resume = usb_serial_reset_resume;
1506 break;
1507 }
1508 }
1509
1510 rc = usb_register(udriver);
1511 if (rc)
1512 goto err_free_driver;
1513
1514 for (sd = serial_drivers; *sd; ++sd) {
1515 (*sd)->usb_driver = udriver;
1516 (*sd)->driver.owner = owner;
1517 rc = usb_serial_register(*sd);
1518 if (rc)
1519 goto err_deregister_drivers;
1520 }
1521
1522 /* Now set udriver's id_table and look for matches */
1523 udriver->id_table = id_table;
1524 rc = driver_attach(&udriver->driver);
1525 return 0;
1526
1527err_deregister_drivers:
1528 while (sd-- > serial_drivers)
1529 usb_serial_deregister(*sd);
1530 usb_deregister(udriver);
1531err_free_driver:
1532 kfree(udriver);
1533 return rc;
1534}
1535EXPORT_SYMBOL_GPL(__usb_serial_register_drivers);
1536
1537/**
1538 * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
1539 * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
1540 *
1541 * Deregisters all the drivers in the @serial_drivers array and deregisters and
1542 * frees the struct usb_driver that was created by the call to
1543 * usb_serial_register_drivers().
1544 */
1545void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[])
1546{
1547 struct usb_driver *udriver = (*serial_drivers)->usb_driver;
1548
1549 for (; *serial_drivers; ++serial_drivers)
1550 usb_serial_deregister(*serial_drivers);
1551 usb_deregister(udriver);
1552 kfree(udriver);
1553}
1554EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
1555
1556MODULE_AUTHOR(DRIVER_AUTHOR);
1557MODULE_DESCRIPTION(DRIVER_DESC);
1558MODULE_LICENSE("GPL v2");