Loading...
1/*
2 * probe.c - PCI detection and setup code
3 */
4
5#include <linux/kernel.h>
6#include <linux/delay.h>
7#include <linux/init.h>
8#include <linux/pci.h>
9#include <linux/slab.h>
10#include <linux/module.h>
11#include <linux/cpumask.h>
12#include <linux/pci-aspm.h>
13#include "pci.h"
14
15#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
16#define CARDBUS_RESERVE_BUSNR 3
17
18/* Ugh. Need to stop exporting this to modules. */
19LIST_HEAD(pci_root_buses);
20EXPORT_SYMBOL(pci_root_buses);
21
22
23static int find_anything(struct device *dev, void *data)
24{
25 return 1;
26}
27
28/*
29 * Some device drivers need know if pci is initiated.
30 * Basically, we think pci is not initiated when there
31 * is no device to be found on the pci_bus_type.
32 */
33int no_pci_devices(void)
34{
35 struct device *dev;
36 int no_devices;
37
38 dev = bus_find_device(&pci_bus_type, NULL, NULL, find_anything);
39 no_devices = (dev == NULL);
40 put_device(dev);
41 return no_devices;
42}
43EXPORT_SYMBOL(no_pci_devices);
44
45/*
46 * PCI Bus Class
47 */
48static void release_pcibus_dev(struct device *dev)
49{
50 struct pci_bus *pci_bus = to_pci_bus(dev);
51
52 if (pci_bus->bridge)
53 put_device(pci_bus->bridge);
54 pci_bus_remove_resources(pci_bus);
55 pci_release_bus_of_node(pci_bus);
56 kfree(pci_bus);
57}
58
59static struct class pcibus_class = {
60 .name = "pci_bus",
61 .dev_release = &release_pcibus_dev,
62 .dev_attrs = pcibus_dev_attrs,
63};
64
65static int __init pcibus_class_init(void)
66{
67 return class_register(&pcibus_class);
68}
69postcore_initcall(pcibus_class_init);
70
71static u64 pci_size(u64 base, u64 maxbase, u64 mask)
72{
73 u64 size = mask & maxbase; /* Find the significant bits */
74 if (!size)
75 return 0;
76
77 /* Get the lowest of them to find the decode size, and
78 from that the extent. */
79 size = (size & ~(size-1)) - 1;
80
81 /* base == maxbase can be valid only if the BAR has
82 already been programmed with all 1s. */
83 if (base == maxbase && ((base | size) & mask) != mask)
84 return 0;
85
86 return size;
87}
88
89static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
90{
91 u32 mem_type;
92 unsigned long flags;
93
94 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
95 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
96 flags |= IORESOURCE_IO;
97 return flags;
98 }
99
100 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
101 flags |= IORESOURCE_MEM;
102 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
103 flags |= IORESOURCE_PREFETCH;
104
105 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
106 switch (mem_type) {
107 case PCI_BASE_ADDRESS_MEM_TYPE_32:
108 break;
109 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
110 dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n");
111 break;
112 case PCI_BASE_ADDRESS_MEM_TYPE_64:
113 flags |= IORESOURCE_MEM_64;
114 break;
115 default:
116 dev_warn(&dev->dev,
117 "mem unknown type %x treated as 32-bit BAR\n",
118 mem_type);
119 break;
120 }
121 return flags;
122}
123
124/**
125 * pci_read_base - read a PCI BAR
126 * @dev: the PCI device
127 * @type: type of the BAR
128 * @res: resource buffer to be filled in
129 * @pos: BAR position in the config space
130 *
131 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
132 */
133int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
134 struct resource *res, unsigned int pos)
135{
136 u32 l, sz, mask;
137 u16 orig_cmd;
138
139 mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
140
141 if (!dev->mmio_always_on) {
142 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
143 pci_write_config_word(dev, PCI_COMMAND,
144 orig_cmd & ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
145 }
146
147 res->name = pci_name(dev);
148
149 pci_read_config_dword(dev, pos, &l);
150 pci_write_config_dword(dev, pos, l | mask);
151 pci_read_config_dword(dev, pos, &sz);
152 pci_write_config_dword(dev, pos, l);
153
154 if (!dev->mmio_always_on)
155 pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
156
157 /*
158 * All bits set in sz means the device isn't working properly.
159 * If the BAR isn't implemented, all bits must be 0. If it's a
160 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
161 * 1 must be clear.
162 */
163 if (!sz || sz == 0xffffffff)
164 goto fail;
165
166 /*
167 * I don't know how l can have all bits set. Copied from old code.
168 * Maybe it fixes a bug on some ancient platform.
169 */
170 if (l == 0xffffffff)
171 l = 0;
172
173 if (type == pci_bar_unknown) {
174 res->flags = decode_bar(dev, l);
175 res->flags |= IORESOURCE_SIZEALIGN;
176 if (res->flags & IORESOURCE_IO) {
177 l &= PCI_BASE_ADDRESS_IO_MASK;
178 mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT;
179 } else {
180 l &= PCI_BASE_ADDRESS_MEM_MASK;
181 mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
182 }
183 } else {
184 res->flags |= (l & IORESOURCE_ROM_ENABLE);
185 l &= PCI_ROM_ADDRESS_MASK;
186 mask = (u32)PCI_ROM_ADDRESS_MASK;
187 }
188
189 if (res->flags & IORESOURCE_MEM_64) {
190 u64 l64 = l;
191 u64 sz64 = sz;
192 u64 mask64 = mask | (u64)~0 << 32;
193
194 pci_read_config_dword(dev, pos + 4, &l);
195 pci_write_config_dword(dev, pos + 4, ~0);
196 pci_read_config_dword(dev, pos + 4, &sz);
197 pci_write_config_dword(dev, pos + 4, l);
198
199 l64 |= ((u64)l << 32);
200 sz64 |= ((u64)sz << 32);
201
202 sz64 = pci_size(l64, sz64, mask64);
203
204 if (!sz64)
205 goto fail;
206
207 if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) {
208 dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n",
209 pos);
210 goto fail;
211 }
212
213 if ((sizeof(resource_size_t) < 8) && l) {
214 /* Address above 32-bit boundary; disable the BAR */
215 pci_write_config_dword(dev, pos, 0);
216 pci_write_config_dword(dev, pos + 4, 0);
217 res->start = 0;
218 res->end = sz64;
219 } else {
220 res->start = l64;
221 res->end = l64 + sz64;
222 dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n",
223 pos, res);
224 }
225 } else {
226 sz = pci_size(l, sz, mask);
227
228 if (!sz)
229 goto fail;
230
231 res->start = l;
232 res->end = l + sz;
233
234 dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
235 }
236
237 out:
238 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
239 fail:
240 res->flags = 0;
241 goto out;
242}
243
244static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
245{
246 unsigned int pos, reg;
247
248 for (pos = 0; pos < howmany; pos++) {
249 struct resource *res = &dev->resource[pos];
250 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
251 pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
252 }
253
254 if (rom) {
255 struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
256 dev->rom_base_reg = rom;
257 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
258 IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
259 IORESOURCE_SIZEALIGN;
260 __pci_read_base(dev, pci_bar_mem32, res, rom);
261 }
262}
263
264static void __devinit pci_read_bridge_io(struct pci_bus *child)
265{
266 struct pci_dev *dev = child->self;
267 u8 io_base_lo, io_limit_lo;
268 unsigned long base, limit;
269 struct resource *res;
270
271 res = child->resource[0];
272 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
273 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
274 base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
275 limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
276
277 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
278 u16 io_base_hi, io_limit_hi;
279 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
280 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
281 base |= (io_base_hi << 16);
282 limit |= (io_limit_hi << 16);
283 }
284
285 if (base && base <= limit) {
286 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
287 if (!res->start)
288 res->start = base;
289 if (!res->end)
290 res->end = limit + 0xfff;
291 dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
292 }
293}
294
295static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
296{
297 struct pci_dev *dev = child->self;
298 u16 mem_base_lo, mem_limit_lo;
299 unsigned long base, limit;
300 struct resource *res;
301
302 res = child->resource[1];
303 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
304 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
305 base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
306 limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
307 if (base && base <= limit) {
308 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
309 res->start = base;
310 res->end = limit + 0xfffff;
311 dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
312 }
313}
314
315static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
316{
317 struct pci_dev *dev = child->self;
318 u16 mem_base_lo, mem_limit_lo;
319 unsigned long base, limit;
320 struct resource *res;
321
322 res = child->resource[2];
323 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
324 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
325 base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
326 limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
327
328 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
329 u32 mem_base_hi, mem_limit_hi;
330 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
331 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
332
333 /*
334 * Some bridges set the base > limit by default, and some
335 * (broken) BIOSes do not initialize them. If we find
336 * this, just assume they are not being used.
337 */
338 if (mem_base_hi <= mem_limit_hi) {
339#if BITS_PER_LONG == 64
340 base |= ((long) mem_base_hi) << 32;
341 limit |= ((long) mem_limit_hi) << 32;
342#else
343 if (mem_base_hi || mem_limit_hi) {
344 dev_err(&dev->dev, "can't handle 64-bit "
345 "address space for bridge\n");
346 return;
347 }
348#endif
349 }
350 }
351 if (base && base <= limit) {
352 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
353 IORESOURCE_MEM | IORESOURCE_PREFETCH;
354 if (res->flags & PCI_PREF_RANGE_TYPE_64)
355 res->flags |= IORESOURCE_MEM_64;
356 res->start = base;
357 res->end = limit + 0xfffff;
358 dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
359 }
360}
361
362void __devinit pci_read_bridge_bases(struct pci_bus *child)
363{
364 struct pci_dev *dev = child->self;
365 struct resource *res;
366 int i;
367
368 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
369 return;
370
371 dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
372 child->secondary, child->subordinate,
373 dev->transparent ? " (subtractive decode)" : "");
374
375 pci_bus_remove_resources(child);
376 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
377 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
378
379 pci_read_bridge_io(child);
380 pci_read_bridge_mmio(child);
381 pci_read_bridge_mmio_pref(child);
382
383 if (dev->transparent) {
384 pci_bus_for_each_resource(child->parent, res, i) {
385 if (res) {
386 pci_bus_add_resource(child, res,
387 PCI_SUBTRACTIVE_DECODE);
388 dev_printk(KERN_DEBUG, &dev->dev,
389 " bridge window %pR (subtractive decode)\n",
390 res);
391 }
392 }
393 }
394}
395
396static struct pci_bus * pci_alloc_bus(void)
397{
398 struct pci_bus *b;
399
400 b = kzalloc(sizeof(*b), GFP_KERNEL);
401 if (b) {
402 INIT_LIST_HEAD(&b->node);
403 INIT_LIST_HEAD(&b->children);
404 INIT_LIST_HEAD(&b->devices);
405 INIT_LIST_HEAD(&b->slots);
406 INIT_LIST_HEAD(&b->resources);
407 b->max_bus_speed = PCI_SPEED_UNKNOWN;
408 b->cur_bus_speed = PCI_SPEED_UNKNOWN;
409 }
410 return b;
411}
412
413static unsigned char pcix_bus_speed[] = {
414 PCI_SPEED_UNKNOWN, /* 0 */
415 PCI_SPEED_66MHz_PCIX, /* 1 */
416 PCI_SPEED_100MHz_PCIX, /* 2 */
417 PCI_SPEED_133MHz_PCIX, /* 3 */
418 PCI_SPEED_UNKNOWN, /* 4 */
419 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
420 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
421 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
422 PCI_SPEED_UNKNOWN, /* 8 */
423 PCI_SPEED_66MHz_PCIX_266, /* 9 */
424 PCI_SPEED_100MHz_PCIX_266, /* A */
425 PCI_SPEED_133MHz_PCIX_266, /* B */
426 PCI_SPEED_UNKNOWN, /* C */
427 PCI_SPEED_66MHz_PCIX_533, /* D */
428 PCI_SPEED_100MHz_PCIX_533, /* E */
429 PCI_SPEED_133MHz_PCIX_533 /* F */
430};
431
432static unsigned char pcie_link_speed[] = {
433 PCI_SPEED_UNKNOWN, /* 0 */
434 PCIE_SPEED_2_5GT, /* 1 */
435 PCIE_SPEED_5_0GT, /* 2 */
436 PCIE_SPEED_8_0GT, /* 3 */
437 PCI_SPEED_UNKNOWN, /* 4 */
438 PCI_SPEED_UNKNOWN, /* 5 */
439 PCI_SPEED_UNKNOWN, /* 6 */
440 PCI_SPEED_UNKNOWN, /* 7 */
441 PCI_SPEED_UNKNOWN, /* 8 */
442 PCI_SPEED_UNKNOWN, /* 9 */
443 PCI_SPEED_UNKNOWN, /* A */
444 PCI_SPEED_UNKNOWN, /* B */
445 PCI_SPEED_UNKNOWN, /* C */
446 PCI_SPEED_UNKNOWN, /* D */
447 PCI_SPEED_UNKNOWN, /* E */
448 PCI_SPEED_UNKNOWN /* F */
449};
450
451void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
452{
453 bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
454}
455EXPORT_SYMBOL_GPL(pcie_update_link_speed);
456
457static unsigned char agp_speeds[] = {
458 AGP_UNKNOWN,
459 AGP_1X,
460 AGP_2X,
461 AGP_4X,
462 AGP_8X
463};
464
465static enum pci_bus_speed agp_speed(int agp3, int agpstat)
466{
467 int index = 0;
468
469 if (agpstat & 4)
470 index = 3;
471 else if (agpstat & 2)
472 index = 2;
473 else if (agpstat & 1)
474 index = 1;
475 else
476 goto out;
477
478 if (agp3) {
479 index += 2;
480 if (index == 5)
481 index = 0;
482 }
483
484 out:
485 return agp_speeds[index];
486}
487
488
489static void pci_set_bus_speed(struct pci_bus *bus)
490{
491 struct pci_dev *bridge = bus->self;
492 int pos;
493
494 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
495 if (!pos)
496 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
497 if (pos) {
498 u32 agpstat, agpcmd;
499
500 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
501 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
502
503 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
504 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
505 }
506
507 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
508 if (pos) {
509 u16 status;
510 enum pci_bus_speed max;
511 pci_read_config_word(bridge, pos + 2, &status);
512
513 if (status & 0x8000) {
514 max = PCI_SPEED_133MHz_PCIX_533;
515 } else if (status & 0x4000) {
516 max = PCI_SPEED_133MHz_PCIX_266;
517 } else if (status & 0x0002) {
518 if (((status >> 12) & 0x3) == 2) {
519 max = PCI_SPEED_133MHz_PCIX_ECC;
520 } else {
521 max = PCI_SPEED_133MHz_PCIX;
522 }
523 } else {
524 max = PCI_SPEED_66MHz_PCIX;
525 }
526
527 bus->max_bus_speed = max;
528 bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf];
529
530 return;
531 }
532
533 pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
534 if (pos) {
535 u32 linkcap;
536 u16 linksta;
537
538 pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap);
539 bus->max_bus_speed = pcie_link_speed[linkcap & 0xf];
540
541 pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta);
542 pcie_update_link_speed(bus, linksta);
543 }
544}
545
546
547static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
548 struct pci_dev *bridge, int busnr)
549{
550 struct pci_bus *child;
551 int i;
552
553 /*
554 * Allocate a new bus, and inherit stuff from the parent..
555 */
556 child = pci_alloc_bus();
557 if (!child)
558 return NULL;
559
560 child->parent = parent;
561 child->ops = parent->ops;
562 child->sysdata = parent->sysdata;
563 child->bus_flags = parent->bus_flags;
564
565 /* initialize some portions of the bus device, but don't register it
566 * now as the parent is not properly set up yet. This device will get
567 * registered later in pci_bus_add_devices()
568 */
569 child->dev.class = &pcibus_class;
570 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
571
572 /*
573 * Set up the primary, secondary and subordinate
574 * bus numbers.
575 */
576 child->number = child->secondary = busnr;
577 child->primary = parent->secondary;
578 child->subordinate = 0xff;
579
580 if (!bridge)
581 return child;
582
583 child->self = bridge;
584 child->bridge = get_device(&bridge->dev);
585 pci_set_bus_of_node(child);
586 pci_set_bus_speed(child);
587
588 /* Set up default resource pointers and names.. */
589 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
590 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
591 child->resource[i]->name = child->name;
592 }
593 bridge->subordinate = child;
594
595 return child;
596}
597
598struct pci_bus *__ref pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
599{
600 struct pci_bus *child;
601
602 child = pci_alloc_child_bus(parent, dev, busnr);
603 if (child) {
604 down_write(&pci_bus_sem);
605 list_add_tail(&child->node, &parent->children);
606 up_write(&pci_bus_sem);
607 }
608 return child;
609}
610
611static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
612{
613 struct pci_bus *parent = child->parent;
614
615 /* Attempts to fix that up are really dangerous unless
616 we're going to re-assign all bus numbers. */
617 if (!pcibios_assign_all_busses())
618 return;
619
620 while (parent->parent && parent->subordinate < max) {
621 parent->subordinate = max;
622 pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
623 parent = parent->parent;
624 }
625}
626
627/*
628 * If it's a bridge, configure it and scan the bus behind it.
629 * For CardBus bridges, we don't scan behind as the devices will
630 * be handled by the bridge driver itself.
631 *
632 * We need to process bridges in two passes -- first we scan those
633 * already configured by the BIOS and after we are done with all of
634 * them, we proceed to assigning numbers to the remaining buses in
635 * order to avoid overlaps between old and new bus numbers.
636 */
637int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
638{
639 struct pci_bus *child;
640 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
641 u32 buses, i, j = 0;
642 u16 bctl;
643 u8 primary, secondary, subordinate;
644 int broken = 0;
645
646 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
647 primary = buses & 0xFF;
648 secondary = (buses >> 8) & 0xFF;
649 subordinate = (buses >> 16) & 0xFF;
650
651 dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
652 secondary, subordinate, pass);
653
654 /* Check if setup is sensible at all */
655 if (!pass &&
656 (primary != bus->number || secondary <= bus->number)) {
657 dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
658 broken = 1;
659 }
660
661 /* Disable MasterAbortMode during probing to avoid reporting
662 of bus errors (in some architectures) */
663 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
664 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
665 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
666
667 if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
668 !is_cardbus && !broken) {
669 unsigned int cmax;
670 /*
671 * Bus already configured by firmware, process it in the first
672 * pass and just note the configuration.
673 */
674 if (pass)
675 goto out;
676
677 /*
678 * If we already got to this bus through a different bridge,
679 * don't re-add it. This can happen with the i450NX chipset.
680 *
681 * However, we continue to descend down the hierarchy and
682 * scan remaining child buses.
683 */
684 child = pci_find_bus(pci_domain_nr(bus), secondary);
685 if (!child) {
686 child = pci_add_new_bus(bus, dev, secondary);
687 if (!child)
688 goto out;
689 child->primary = primary;
690 child->subordinate = subordinate;
691 child->bridge_ctl = bctl;
692 }
693
694 cmax = pci_scan_child_bus(child);
695 if (cmax > max)
696 max = cmax;
697 if (child->subordinate > max)
698 max = child->subordinate;
699 } else {
700 /*
701 * We need to assign a number to this bus which we always
702 * do in the second pass.
703 */
704 if (!pass) {
705 if (pcibios_assign_all_busses() || broken)
706 /* Temporarily disable forwarding of the
707 configuration cycles on all bridges in
708 this bus segment to avoid possible
709 conflicts in the second pass between two
710 bridges programmed with overlapping
711 bus ranges. */
712 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
713 buses & ~0xffffff);
714 goto out;
715 }
716
717 /* Clear errors */
718 pci_write_config_word(dev, PCI_STATUS, 0xffff);
719
720 /* Prevent assigning a bus number that already exists.
721 * This can happen when a bridge is hot-plugged, so in
722 * this case we only re-scan this bus. */
723 child = pci_find_bus(pci_domain_nr(bus), max+1);
724 if (!child) {
725 child = pci_add_new_bus(bus, dev, ++max);
726 if (!child)
727 goto out;
728 }
729 buses = (buses & 0xff000000)
730 | ((unsigned int)(child->primary) << 0)
731 | ((unsigned int)(child->secondary) << 8)
732 | ((unsigned int)(child->subordinate) << 16);
733
734 /*
735 * yenta.c forces a secondary latency timer of 176.
736 * Copy that behaviour here.
737 */
738 if (is_cardbus) {
739 buses &= ~0xff000000;
740 buses |= CARDBUS_LATENCY_TIMER << 24;
741 }
742
743 /*
744 * We need to blast all three values with a single write.
745 */
746 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
747
748 if (!is_cardbus) {
749 child->bridge_ctl = bctl;
750 /*
751 * Adjust subordinate busnr in parent buses.
752 * We do this before scanning for children because
753 * some devices may not be detected if the bios
754 * was lazy.
755 */
756 pci_fixup_parent_subordinate_busnr(child, max);
757 /* Now we can scan all subordinate buses... */
758 max = pci_scan_child_bus(child);
759 /*
760 * now fix it up again since we have found
761 * the real value of max.
762 */
763 pci_fixup_parent_subordinate_busnr(child, max);
764 } else {
765 /*
766 * For CardBus bridges, we leave 4 bus numbers
767 * as cards with a PCI-to-PCI bridge can be
768 * inserted later.
769 */
770 for (i=0; i<CARDBUS_RESERVE_BUSNR; i++) {
771 struct pci_bus *parent = bus;
772 if (pci_find_bus(pci_domain_nr(bus),
773 max+i+1))
774 break;
775 while (parent->parent) {
776 if ((!pcibios_assign_all_busses()) &&
777 (parent->subordinate > max) &&
778 (parent->subordinate <= max+i)) {
779 j = 1;
780 }
781 parent = parent->parent;
782 }
783 if (j) {
784 /*
785 * Often, there are two cardbus bridges
786 * -- try to leave one valid bus number
787 * for each one.
788 */
789 i /= 2;
790 break;
791 }
792 }
793 max += i;
794 pci_fixup_parent_subordinate_busnr(child, max);
795 }
796 /*
797 * Set the subordinate bus number to its real value.
798 */
799 child->subordinate = max;
800 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
801 }
802
803 sprintf(child->name,
804 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
805 pci_domain_nr(bus), child->number);
806
807 /* Has only triggered on CardBus, fixup is in yenta_socket */
808 while (bus->parent) {
809 if ((child->subordinate > bus->subordinate) ||
810 (child->number > bus->subordinate) ||
811 (child->number < bus->number) ||
812 (child->subordinate < bus->number)) {
813 dev_info(&child->dev, "[bus %02x-%02x] %s "
814 "hidden behind%s bridge %s [bus %02x-%02x]\n",
815 child->number, child->subordinate,
816 (bus->number > child->subordinate &&
817 bus->subordinate < child->number) ?
818 "wholly" : "partially",
819 bus->self->transparent ? " transparent" : "",
820 dev_name(&bus->dev),
821 bus->number, bus->subordinate);
822 }
823 bus = bus->parent;
824 }
825
826out:
827 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
828
829 return max;
830}
831
832/*
833 * Read interrupt line and base address registers.
834 * The architecture-dependent code can tweak these, of course.
835 */
836static void pci_read_irq(struct pci_dev *dev)
837{
838 unsigned char irq;
839
840 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
841 dev->pin = irq;
842 if (irq)
843 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
844 dev->irq = irq;
845}
846
847void set_pcie_port_type(struct pci_dev *pdev)
848{
849 int pos;
850 u16 reg16;
851
852 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
853 if (!pos)
854 return;
855 pdev->is_pcie = 1;
856 pdev->pcie_cap = pos;
857 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
858 pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
859 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
860 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
861}
862
863void set_pcie_hotplug_bridge(struct pci_dev *pdev)
864{
865 int pos;
866 u16 reg16;
867 u32 reg32;
868
869 pos = pci_pcie_cap(pdev);
870 if (!pos)
871 return;
872 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
873 if (!(reg16 & PCI_EXP_FLAGS_SLOT))
874 return;
875 pci_read_config_dword(pdev, pos + PCI_EXP_SLTCAP, ®32);
876 if (reg32 & PCI_EXP_SLTCAP_HPC)
877 pdev->is_hotplug_bridge = 1;
878}
879
880#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
881
882/**
883 * pci_setup_device - fill in class and map information of a device
884 * @dev: the device structure to fill
885 *
886 * Initialize the device structure with information about the device's
887 * vendor,class,memory and IO-space addresses,IRQ lines etc.
888 * Called at initialisation of the PCI subsystem and by CardBus services.
889 * Returns 0 on success and negative if unknown type of device (not normal,
890 * bridge or CardBus).
891 */
892int pci_setup_device(struct pci_dev *dev)
893{
894 u32 class;
895 u8 hdr_type;
896 struct pci_slot *slot;
897 int pos = 0;
898
899 if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
900 return -EIO;
901
902 dev->sysdata = dev->bus->sysdata;
903 dev->dev.parent = dev->bus->bridge;
904 dev->dev.bus = &pci_bus_type;
905 dev->hdr_type = hdr_type & 0x7f;
906 dev->multifunction = !!(hdr_type & 0x80);
907 dev->error_state = pci_channel_io_normal;
908 set_pcie_port_type(dev);
909
910 list_for_each_entry(slot, &dev->bus->slots, list)
911 if (PCI_SLOT(dev->devfn) == slot->number)
912 dev->slot = slot;
913
914 /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
915 set this higher, assuming the system even supports it. */
916 dev->dma_mask = 0xffffffff;
917
918 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
919 dev->bus->number, PCI_SLOT(dev->devfn),
920 PCI_FUNC(dev->devfn));
921
922 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
923 dev->revision = class & 0xff;
924 class >>= 8; /* upper 3 bytes */
925 dev->class = class;
926 class >>= 8;
927
928 dev_printk(KERN_DEBUG, &dev->dev, "[%04x:%04x] type %d class %#08x\n",
929 dev->vendor, dev->device, dev->hdr_type, class);
930
931 /* need to have dev->class ready */
932 dev->cfg_size = pci_cfg_space_size(dev);
933
934 /* "Unknown power state" */
935 dev->current_state = PCI_UNKNOWN;
936
937 /* Early fixups, before probing the BARs */
938 pci_fixup_device(pci_fixup_early, dev);
939 /* device class may be changed after fixup */
940 class = dev->class >> 8;
941
942 switch (dev->hdr_type) { /* header type */
943 case PCI_HEADER_TYPE_NORMAL: /* standard header */
944 if (class == PCI_CLASS_BRIDGE_PCI)
945 goto bad;
946 pci_read_irq(dev);
947 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
948 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
949 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
950
951 /*
952 * Do the ugly legacy mode stuff here rather than broken chip
953 * quirk code. Legacy mode ATA controllers have fixed
954 * addresses. These are not always echoed in BAR0-3, and
955 * BAR0-3 in a few cases contain junk!
956 */
957 if (class == PCI_CLASS_STORAGE_IDE) {
958 u8 progif;
959 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
960 if ((progif & 1) == 0) {
961 dev->resource[0].start = 0x1F0;
962 dev->resource[0].end = 0x1F7;
963 dev->resource[0].flags = LEGACY_IO_RESOURCE;
964 dev->resource[1].start = 0x3F6;
965 dev->resource[1].end = 0x3F6;
966 dev->resource[1].flags = LEGACY_IO_RESOURCE;
967 }
968 if ((progif & 4) == 0) {
969 dev->resource[2].start = 0x170;
970 dev->resource[2].end = 0x177;
971 dev->resource[2].flags = LEGACY_IO_RESOURCE;
972 dev->resource[3].start = 0x376;
973 dev->resource[3].end = 0x376;
974 dev->resource[3].flags = LEGACY_IO_RESOURCE;
975 }
976 }
977 break;
978
979 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
980 if (class != PCI_CLASS_BRIDGE_PCI)
981 goto bad;
982 /* The PCI-to-PCI bridge spec requires that subtractive
983 decoding (i.e. transparent) bridge must have programming
984 interface code of 0x01. */
985 pci_read_irq(dev);
986 dev->transparent = ((dev->class & 0xff) == 1);
987 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
988 set_pcie_hotplug_bridge(dev);
989 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
990 if (pos) {
991 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
992 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
993 }
994 break;
995
996 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
997 if (class != PCI_CLASS_BRIDGE_CARDBUS)
998 goto bad;
999 pci_read_irq(dev);
1000 pci_read_bases(dev, 1, 0);
1001 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
1002 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
1003 break;
1004
1005 default: /* unknown header */
1006 dev_err(&dev->dev, "unknown header type %02x, "
1007 "ignoring device\n", dev->hdr_type);
1008 return -EIO;
1009
1010 bad:
1011 dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
1012 "type %02x)\n", class, dev->hdr_type);
1013 dev->class = PCI_CLASS_NOT_DEFINED;
1014 }
1015
1016 /* We found a fine healthy device, go go go... */
1017 return 0;
1018}
1019
1020static void pci_release_capabilities(struct pci_dev *dev)
1021{
1022 pci_vpd_release(dev);
1023 pci_iov_release(dev);
1024}
1025
1026/**
1027 * pci_release_dev - free a pci device structure when all users of it are finished.
1028 * @dev: device that's been disconnected
1029 *
1030 * Will be called only by the device core when all users of this pci device are
1031 * done.
1032 */
1033static void pci_release_dev(struct device *dev)
1034{
1035 struct pci_dev *pci_dev;
1036
1037 pci_dev = to_pci_dev(dev);
1038 pci_release_capabilities(pci_dev);
1039 pci_release_of_node(pci_dev);
1040 kfree(pci_dev);
1041}
1042
1043/**
1044 * pci_cfg_space_size - get the configuration space size of the PCI device.
1045 * @dev: PCI device
1046 *
1047 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
1048 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
1049 * access it. Maybe we don't have a way to generate extended config space
1050 * accesses, or the device is behind a reverse Express bridge. So we try
1051 * reading the dword at 0x100 which must either be 0 or a valid extended
1052 * capability header.
1053 */
1054int pci_cfg_space_size_ext(struct pci_dev *dev)
1055{
1056 u32 status;
1057 int pos = PCI_CFG_SPACE_SIZE;
1058
1059 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
1060 goto fail;
1061 if (status == 0xffffffff)
1062 goto fail;
1063
1064 return PCI_CFG_SPACE_EXP_SIZE;
1065
1066 fail:
1067 return PCI_CFG_SPACE_SIZE;
1068}
1069
1070int pci_cfg_space_size(struct pci_dev *dev)
1071{
1072 int pos;
1073 u32 status;
1074 u16 class;
1075
1076 class = dev->class >> 8;
1077 if (class == PCI_CLASS_BRIDGE_HOST)
1078 return pci_cfg_space_size_ext(dev);
1079
1080 pos = pci_pcie_cap(dev);
1081 if (!pos) {
1082 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
1083 if (!pos)
1084 goto fail;
1085
1086 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
1087 if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
1088 goto fail;
1089 }
1090
1091 return pci_cfg_space_size_ext(dev);
1092
1093 fail:
1094 return PCI_CFG_SPACE_SIZE;
1095}
1096
1097static void pci_release_bus_bridge_dev(struct device *dev)
1098{
1099 kfree(dev);
1100}
1101
1102struct pci_dev *alloc_pci_dev(void)
1103{
1104 struct pci_dev *dev;
1105
1106 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
1107 if (!dev)
1108 return NULL;
1109
1110 INIT_LIST_HEAD(&dev->bus_list);
1111
1112 return dev;
1113}
1114EXPORT_SYMBOL(alloc_pci_dev);
1115
1116/*
1117 * Read the config data for a PCI device, sanity-check it
1118 * and fill in the dev structure...
1119 */
1120static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
1121{
1122 struct pci_dev *dev;
1123 u32 l;
1124 int delay = 1;
1125
1126 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
1127 return NULL;
1128
1129 /* some broken boards return 0 or ~0 if a slot is empty: */
1130 if (l == 0xffffffff || l == 0x00000000 ||
1131 l == 0x0000ffff || l == 0xffff0000)
1132 return NULL;
1133
1134 /* Configuration request Retry Status */
1135 while (l == 0xffff0001) {
1136 msleep(delay);
1137 delay *= 2;
1138 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
1139 return NULL;
1140 /* Card hasn't responded in 60 seconds? Must be stuck. */
1141 if (delay > 60 * 1000) {
1142 printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not "
1143 "responding\n", pci_domain_nr(bus),
1144 bus->number, PCI_SLOT(devfn),
1145 PCI_FUNC(devfn));
1146 return NULL;
1147 }
1148 }
1149
1150 dev = alloc_pci_dev();
1151 if (!dev)
1152 return NULL;
1153
1154 dev->bus = bus;
1155 dev->devfn = devfn;
1156 dev->vendor = l & 0xffff;
1157 dev->device = (l >> 16) & 0xffff;
1158
1159 pci_set_of_node(dev);
1160
1161 if (pci_setup_device(dev)) {
1162 kfree(dev);
1163 return NULL;
1164 }
1165
1166 return dev;
1167}
1168
1169static void pci_init_capabilities(struct pci_dev *dev)
1170{
1171 /* MSI/MSI-X list */
1172 pci_msi_init_pci_dev(dev);
1173
1174 /* Buffers for saving PCIe and PCI-X capabilities */
1175 pci_allocate_cap_save_buffers(dev);
1176
1177 /* Power Management */
1178 pci_pm_init(dev);
1179 platform_pci_wakeup_init(dev);
1180
1181 /* Vital Product Data */
1182 pci_vpd_pci22_init(dev);
1183
1184 /* Alternative Routing-ID Forwarding */
1185 pci_enable_ari(dev);
1186
1187 /* Single Root I/O Virtualization */
1188 pci_iov_init(dev);
1189
1190 /* Enable ACS P2P upstream forwarding */
1191 pci_enable_acs(dev);
1192}
1193
1194void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
1195{
1196 device_initialize(&dev->dev);
1197 dev->dev.release = pci_release_dev;
1198 pci_dev_get(dev);
1199
1200 dev->dev.dma_mask = &dev->dma_mask;
1201 dev->dev.dma_parms = &dev->dma_parms;
1202 dev->dev.coherent_dma_mask = 0xffffffffull;
1203
1204 pci_set_dma_max_seg_size(dev, 65536);
1205 pci_set_dma_seg_boundary(dev, 0xffffffff);
1206
1207 /* Fix up broken headers */
1208 pci_fixup_device(pci_fixup_header, dev);
1209
1210 /* Clear the state_saved flag. */
1211 dev->state_saved = false;
1212
1213 /* Initialize various capabilities */
1214 pci_init_capabilities(dev);
1215
1216 /*
1217 * Add the device to our list of discovered devices
1218 * and the bus list for fixup functions, etc.
1219 */
1220 down_write(&pci_bus_sem);
1221 list_add_tail(&dev->bus_list, &bus->devices);
1222 up_write(&pci_bus_sem);
1223}
1224
1225struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn)
1226{
1227 struct pci_dev *dev;
1228
1229 dev = pci_get_slot(bus, devfn);
1230 if (dev) {
1231 pci_dev_put(dev);
1232 return dev;
1233 }
1234
1235 dev = pci_scan_device(bus, devfn);
1236 if (!dev)
1237 return NULL;
1238
1239 pci_device_add(dev, bus);
1240
1241 return dev;
1242}
1243EXPORT_SYMBOL(pci_scan_single_device);
1244
1245static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn)
1246{
1247 u16 cap;
1248 unsigned pos, next_fn;
1249
1250 if (!dev)
1251 return 0;
1252
1253 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
1254 if (!pos)
1255 return 0;
1256 pci_read_config_word(dev, pos + 4, &cap);
1257 next_fn = cap >> 8;
1258 if (next_fn <= fn)
1259 return 0;
1260 return next_fn;
1261}
1262
1263static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn)
1264{
1265 return (fn + 1) % 8;
1266}
1267
1268static unsigned no_next_fn(struct pci_dev *dev, unsigned fn)
1269{
1270 return 0;
1271}
1272
1273static int only_one_child(struct pci_bus *bus)
1274{
1275 struct pci_dev *parent = bus->self;
1276 if (!parent || !pci_is_pcie(parent))
1277 return 0;
1278 if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
1279 parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
1280 return 1;
1281 return 0;
1282}
1283
1284/**
1285 * pci_scan_slot - scan a PCI slot on a bus for devices.
1286 * @bus: PCI bus to scan
1287 * @devfn: slot number to scan (must have zero function.)
1288 *
1289 * Scan a PCI slot on the specified PCI bus for devices, adding
1290 * discovered devices to the @bus->devices list. New devices
1291 * will not have is_added set.
1292 *
1293 * Returns the number of new devices found.
1294 */
1295int pci_scan_slot(struct pci_bus *bus, int devfn)
1296{
1297 unsigned fn, nr = 0;
1298 struct pci_dev *dev;
1299 unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn;
1300
1301 if (only_one_child(bus) && (devfn > 0))
1302 return 0; /* Already scanned the entire slot */
1303
1304 dev = pci_scan_single_device(bus, devfn);
1305 if (!dev)
1306 return 0;
1307 if (!dev->is_added)
1308 nr++;
1309
1310 if (pci_ari_enabled(bus))
1311 next_fn = next_ari_fn;
1312 else if (dev->multifunction)
1313 next_fn = next_trad_fn;
1314
1315 for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) {
1316 dev = pci_scan_single_device(bus, devfn + fn);
1317 if (dev) {
1318 if (!dev->is_added)
1319 nr++;
1320 dev->multifunction = 1;
1321 }
1322 }
1323
1324 /* only one slot has pcie device */
1325 if (bus->self && nr)
1326 pcie_aspm_init_link_state(bus->self);
1327
1328 return nr;
1329}
1330
1331static int pcie_find_smpss(struct pci_dev *dev, void *data)
1332{
1333 u8 *smpss = data;
1334
1335 if (!pci_is_pcie(dev))
1336 return 0;
1337
1338 /* For PCIE hotplug enabled slots not connected directly to a
1339 * PCI-E root port, there can be problems when hotplugging
1340 * devices. This is due to the possibility of hotplugging a
1341 * device into the fabric with a smaller MPS that the devices
1342 * currently running have configured. Modifying the MPS on the
1343 * running devices could cause a fatal bus error due to an
1344 * incoming frame being larger than the newly configured MPS.
1345 * To work around this, the MPS for the entire fabric must be
1346 * set to the minimum size. Any devices hotplugged into this
1347 * fabric will have the minimum MPS set. If the PCI hotplug
1348 * slot is directly connected to the root port and there are not
1349 * other devices on the fabric (which seems to be the most
1350 * common case), then this is not an issue and MPS discovery
1351 * will occur as normal.
1352 */
1353 if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) ||
1354 (dev->bus->self &&
1355 dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT)))
1356 *smpss = 0;
1357
1358 if (*smpss > dev->pcie_mpss)
1359 *smpss = dev->pcie_mpss;
1360
1361 return 0;
1362}
1363
1364static void pcie_write_mps(struct pci_dev *dev, int mps)
1365{
1366 int rc, dev_mpss;
1367
1368 dev_mpss = 128 << dev->pcie_mpss;
1369
1370 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
1371 if (dev->bus->self) {
1372 dev_dbg(&dev->bus->dev, "Bus MPSS %d\n",
1373 128 << dev->bus->self->pcie_mpss);
1374
1375 /* For "MPS Force Max", the assumption is made that
1376 * downstream communication will never be larger than
1377 * the MRRS. So, the MPS only needs to be configured
1378 * for the upstream communication. This being the case,
1379 * walk from the top down and set the MPS of the child
1380 * to that of the parent bus.
1381 */
1382 mps = 128 << dev->bus->self->pcie_mpss;
1383 if (mps > dev_mpss)
1384 dev_warn(&dev->dev, "MPS configured higher than"
1385 " maximum supported by the device. If"
1386 " a bus issue occurs, try running with"
1387 " pci=pcie_bus_safe.\n");
1388 }
1389
1390 dev->pcie_mpss = ffs(mps) - 8;
1391 }
1392
1393 rc = pcie_set_mps(dev, mps);
1394 if (rc)
1395 dev_err(&dev->dev, "Failed attempting to set the MPS\n");
1396}
1397
1398static void pcie_write_mrrs(struct pci_dev *dev, int mps)
1399{
1400 int rc, mrrs, dev_mpss;
1401
1402 /* In the "safe" case, do not configure the MRRS. There appear to be
1403 * issues with setting MRRS to 0 on a number of devices.
1404 */
1405
1406 if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
1407 return;
1408
1409 dev_mpss = 128 << dev->pcie_mpss;
1410
1411 /* For Max performance, the MRRS must be set to the largest supported
1412 * value. However, it cannot be configured larger than the MPS the
1413 * device or the bus can support. This assumes that the largest MRRS
1414 * available on the device cannot be smaller than the device MPSS.
1415 */
1416 mrrs = min(mps, dev_mpss);
1417
1418 /* MRRS is a R/W register. Invalid values can be written, but a
1419 * subsequent read will verify if the value is acceptable or not.
1420 * If the MRRS value provided is not acceptable (e.g., too large),
1421 * shrink the value until it is acceptable to the HW.
1422 */
1423 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
1424 dev_warn(&dev->dev, "Attempting to modify the PCI-E MRRS value"
1425 " to %d. If any issues are encountered, please try "
1426 "running with pci=pcie_bus_safe\n", mrrs);
1427 rc = pcie_set_readrq(dev, mrrs);
1428 if (rc)
1429 dev_err(&dev->dev,
1430 "Failed attempting to set the MRRS\n");
1431
1432 mrrs /= 2;
1433 }
1434}
1435
1436static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
1437{
1438 int mps = 128 << *(u8 *)data;
1439
1440 if (!pci_is_pcie(dev))
1441 return 0;
1442
1443 dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
1444 pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
1445
1446 pcie_write_mps(dev, mps);
1447 pcie_write_mrrs(dev, mps);
1448
1449 dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
1450 pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
1451
1452 return 0;
1453}
1454
1455/* pcie_bus_configure_mps requires that pci_walk_bus work in a top-down,
1456 * parents then children fashion. If this changes, then this code will not
1457 * work as designed.
1458 */
1459void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss)
1460{
1461 u8 smpss;
1462
1463 if (!pci_is_pcie(bus->self))
1464 return;
1465
1466 if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
1467 return;
1468
1469 /* FIXME - Peer to peer DMA is possible, though the endpoint would need
1470 * to be aware to the MPS of the destination. To work around this,
1471 * simply force the MPS of the entire system to the smallest possible.
1472 */
1473 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
1474 smpss = 0;
1475
1476 if (pcie_bus_config == PCIE_BUS_SAFE) {
1477 smpss = mpss;
1478
1479 pcie_find_smpss(bus->self, &smpss);
1480 pci_walk_bus(bus, pcie_find_smpss, &smpss);
1481 }
1482
1483 pcie_bus_configure_set(bus->self, &smpss);
1484 pci_walk_bus(bus, pcie_bus_configure_set, &smpss);
1485}
1486EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);
1487
1488unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
1489{
1490 unsigned int devfn, pass, max = bus->secondary;
1491 struct pci_dev *dev;
1492
1493 dev_dbg(&bus->dev, "scanning bus\n");
1494
1495 /* Go find them, Rover! */
1496 for (devfn = 0; devfn < 0x100; devfn += 8)
1497 pci_scan_slot(bus, devfn);
1498
1499 /* Reserve buses for SR-IOV capability. */
1500 max += pci_iov_bus_range(bus);
1501
1502 /*
1503 * After performing arch-dependent fixup of the bus, look behind
1504 * all PCI-to-PCI bridges on this bus.
1505 */
1506 if (!bus->is_added) {
1507 dev_dbg(&bus->dev, "fixups for bus\n");
1508 pcibios_fixup_bus(bus);
1509 if (pci_is_root_bus(bus))
1510 bus->is_added = 1;
1511 }
1512
1513 for (pass=0; pass < 2; pass++)
1514 list_for_each_entry(dev, &bus->devices, bus_list) {
1515 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
1516 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
1517 max = pci_scan_bridge(bus, dev, max, pass);
1518 }
1519
1520 /*
1521 * We've scanned the bus and so we know all about what's on
1522 * the other side of any bridges that may be on this bus plus
1523 * any devices.
1524 *
1525 * Return how far we've got finding sub-buses.
1526 */
1527 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max);
1528 return max;
1529}
1530
1531struct pci_bus * pci_create_bus(struct device *parent,
1532 int bus, struct pci_ops *ops, void *sysdata)
1533{
1534 int error;
1535 struct pci_bus *b, *b2;
1536 struct device *dev;
1537
1538 b = pci_alloc_bus();
1539 if (!b)
1540 return NULL;
1541
1542 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1543 if (!dev){
1544 kfree(b);
1545 return NULL;
1546 }
1547
1548 b->sysdata = sysdata;
1549 b->ops = ops;
1550
1551 b2 = pci_find_bus(pci_domain_nr(b), bus);
1552 if (b2) {
1553 /* If we already got to this bus through a different bridge, ignore it */
1554 dev_dbg(&b2->dev, "bus already known\n");
1555 goto err_out;
1556 }
1557
1558 down_write(&pci_bus_sem);
1559 list_add_tail(&b->node, &pci_root_buses);
1560 up_write(&pci_bus_sem);
1561
1562 dev->parent = parent;
1563 dev->release = pci_release_bus_bridge_dev;
1564 dev_set_name(dev, "pci%04x:%02x", pci_domain_nr(b), bus);
1565 error = device_register(dev);
1566 if (error)
1567 goto dev_reg_err;
1568 b->bridge = get_device(dev);
1569 device_enable_async_suspend(b->bridge);
1570 pci_set_bus_of_node(b);
1571
1572 if (!parent)
1573 set_dev_node(b->bridge, pcibus_to_node(b));
1574
1575 b->dev.class = &pcibus_class;
1576 b->dev.parent = b->bridge;
1577 dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
1578 error = device_register(&b->dev);
1579 if (error)
1580 goto class_dev_reg_err;
1581
1582 /* Create legacy_io and legacy_mem files for this bus */
1583 pci_create_legacy_files(b);
1584
1585 b->number = b->secondary = bus;
1586 b->resource[0] = &ioport_resource;
1587 b->resource[1] = &iomem_resource;
1588
1589 return b;
1590
1591class_dev_reg_err:
1592 device_unregister(dev);
1593dev_reg_err:
1594 down_write(&pci_bus_sem);
1595 list_del(&b->node);
1596 up_write(&pci_bus_sem);
1597err_out:
1598 kfree(dev);
1599 kfree(b);
1600 return NULL;
1601}
1602
1603struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
1604 int bus, struct pci_ops *ops, void *sysdata)
1605{
1606 struct pci_bus *b;
1607
1608 b = pci_create_bus(parent, bus, ops, sysdata);
1609 if (b)
1610 b->subordinate = pci_scan_child_bus(b);
1611 return b;
1612}
1613EXPORT_SYMBOL(pci_scan_bus_parented);
1614
1615#ifdef CONFIG_HOTPLUG
1616/**
1617 * pci_rescan_bus - scan a PCI bus for devices.
1618 * @bus: PCI bus to scan
1619 *
1620 * Scan a PCI bus and child buses for new devices, adds them,
1621 * and enables them.
1622 *
1623 * Returns the max number of subordinate bus discovered.
1624 */
1625unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
1626{
1627 unsigned int max;
1628 struct pci_dev *dev;
1629
1630 max = pci_scan_child_bus(bus);
1631
1632 down_read(&pci_bus_sem);
1633 list_for_each_entry(dev, &bus->devices, bus_list)
1634 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
1635 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
1636 if (dev->subordinate)
1637 pci_bus_size_bridges(dev->subordinate);
1638 up_read(&pci_bus_sem);
1639
1640 pci_bus_assign_resources(bus);
1641 pci_enable_bridges(bus);
1642 pci_bus_add_devices(bus);
1643
1644 return max;
1645}
1646EXPORT_SYMBOL_GPL(pci_rescan_bus);
1647
1648EXPORT_SYMBOL(pci_add_new_bus);
1649EXPORT_SYMBOL(pci_scan_slot);
1650EXPORT_SYMBOL(pci_scan_bridge);
1651EXPORT_SYMBOL_GPL(pci_scan_child_bus);
1652#endif
1653
1654static int __init pci_sort_bf_cmp(const struct device *d_a, const struct device *d_b)
1655{
1656 const struct pci_dev *a = to_pci_dev(d_a);
1657 const struct pci_dev *b = to_pci_dev(d_b);
1658
1659 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
1660 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
1661
1662 if (a->bus->number < b->bus->number) return -1;
1663 else if (a->bus->number > b->bus->number) return 1;
1664
1665 if (a->devfn < b->devfn) return -1;
1666 else if (a->devfn > b->devfn) return 1;
1667
1668 return 0;
1669}
1670
1671void __init pci_sort_breadthfirst(void)
1672{
1673 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp);
1674}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * PCI detection and setup code
4 */
5
6#include <linux/kernel.h>
7#include <linux/delay.h>
8#include <linux/init.h>
9#include <linux/pci.h>
10#include <linux/msi.h>
11#include <linux/of_device.h>
12#include <linux/of_pci.h>
13#include <linux/pci_hotplug.h>
14#include <linux/slab.h>
15#include <linux/module.h>
16#include <linux/cpumask.h>
17#include <linux/aer.h>
18#include <linux/acpi.h>
19#include <linux/hypervisor.h>
20#include <linux/irqdomain.h>
21#include <linux/pm_runtime.h>
22#include "pci.h"
23
24#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
25#define CARDBUS_RESERVE_BUSNR 3
26
27static struct resource busn_resource = {
28 .name = "PCI busn",
29 .start = 0,
30 .end = 255,
31 .flags = IORESOURCE_BUS,
32};
33
34/* Ugh. Need to stop exporting this to modules. */
35LIST_HEAD(pci_root_buses);
36EXPORT_SYMBOL(pci_root_buses);
37
38static LIST_HEAD(pci_domain_busn_res_list);
39
40struct pci_domain_busn_res {
41 struct list_head list;
42 struct resource res;
43 int domain_nr;
44};
45
46static struct resource *get_pci_domain_busn_res(int domain_nr)
47{
48 struct pci_domain_busn_res *r;
49
50 list_for_each_entry(r, &pci_domain_busn_res_list, list)
51 if (r->domain_nr == domain_nr)
52 return &r->res;
53
54 r = kzalloc(sizeof(*r), GFP_KERNEL);
55 if (!r)
56 return NULL;
57
58 r->domain_nr = domain_nr;
59 r->res.start = 0;
60 r->res.end = 0xff;
61 r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED;
62
63 list_add_tail(&r->list, &pci_domain_busn_res_list);
64
65 return &r->res;
66}
67
68/*
69 * Some device drivers need know if PCI is initiated.
70 * Basically, we think PCI is not initiated when there
71 * is no device to be found on the pci_bus_type.
72 */
73int no_pci_devices(void)
74{
75 struct device *dev;
76 int no_devices;
77
78 dev = bus_find_next_device(&pci_bus_type, NULL);
79 no_devices = (dev == NULL);
80 put_device(dev);
81 return no_devices;
82}
83EXPORT_SYMBOL(no_pci_devices);
84
85/*
86 * PCI Bus Class
87 */
88static void release_pcibus_dev(struct device *dev)
89{
90 struct pci_bus *pci_bus = to_pci_bus(dev);
91
92 put_device(pci_bus->bridge);
93 pci_bus_remove_resources(pci_bus);
94 pci_release_bus_of_node(pci_bus);
95 kfree(pci_bus);
96}
97
98static struct class pcibus_class = {
99 .name = "pci_bus",
100 .dev_release = &release_pcibus_dev,
101 .dev_groups = pcibus_groups,
102};
103
104static int __init pcibus_class_init(void)
105{
106 return class_register(&pcibus_class);
107}
108postcore_initcall(pcibus_class_init);
109
110static u64 pci_size(u64 base, u64 maxbase, u64 mask)
111{
112 u64 size = mask & maxbase; /* Find the significant bits */
113 if (!size)
114 return 0;
115
116 /*
117 * Get the lowest of them to find the decode size, and from that
118 * the extent.
119 */
120 size = size & ~(size-1);
121
122 /*
123 * base == maxbase can be valid only if the BAR has already been
124 * programmed with all 1s.
125 */
126 if (base == maxbase && ((base | (size - 1)) & mask) != mask)
127 return 0;
128
129 return size;
130}
131
132static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
133{
134 u32 mem_type;
135 unsigned long flags;
136
137 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
138 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
139 flags |= IORESOURCE_IO;
140 return flags;
141 }
142
143 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
144 flags |= IORESOURCE_MEM;
145 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
146 flags |= IORESOURCE_PREFETCH;
147
148 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
149 switch (mem_type) {
150 case PCI_BASE_ADDRESS_MEM_TYPE_32:
151 break;
152 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
153 /* 1M mem BAR treated as 32-bit BAR */
154 break;
155 case PCI_BASE_ADDRESS_MEM_TYPE_64:
156 flags |= IORESOURCE_MEM_64;
157 break;
158 default:
159 /* mem unknown type treated as 32-bit BAR */
160 break;
161 }
162 return flags;
163}
164
165#define PCI_COMMAND_DECODE_ENABLE (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)
166
167/**
168 * pci_read_base - Read a PCI BAR
169 * @dev: the PCI device
170 * @type: type of the BAR
171 * @res: resource buffer to be filled in
172 * @pos: BAR position in the config space
173 *
174 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
175 */
176int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
177 struct resource *res, unsigned int pos)
178{
179 u32 l = 0, sz = 0, mask;
180 u64 l64, sz64, mask64;
181 u16 orig_cmd;
182 struct pci_bus_region region, inverted_region;
183
184 mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
185
186 /* No printks while decoding is disabled! */
187 if (!dev->mmio_always_on) {
188 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
189 if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) {
190 pci_write_config_word(dev, PCI_COMMAND,
191 orig_cmd & ~PCI_COMMAND_DECODE_ENABLE);
192 }
193 }
194
195 res->name = pci_name(dev);
196
197 pci_read_config_dword(dev, pos, &l);
198 pci_write_config_dword(dev, pos, l | mask);
199 pci_read_config_dword(dev, pos, &sz);
200 pci_write_config_dword(dev, pos, l);
201
202 /*
203 * All bits set in sz means the device isn't working properly.
204 * If the BAR isn't implemented, all bits must be 0. If it's a
205 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
206 * 1 must be clear.
207 */
208 if (sz == 0xffffffff)
209 sz = 0;
210
211 /*
212 * I don't know how l can have all bits set. Copied from old code.
213 * Maybe it fixes a bug on some ancient platform.
214 */
215 if (l == 0xffffffff)
216 l = 0;
217
218 if (type == pci_bar_unknown) {
219 res->flags = decode_bar(dev, l);
220 res->flags |= IORESOURCE_SIZEALIGN;
221 if (res->flags & IORESOURCE_IO) {
222 l64 = l & PCI_BASE_ADDRESS_IO_MASK;
223 sz64 = sz & PCI_BASE_ADDRESS_IO_MASK;
224 mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT;
225 } else {
226 l64 = l & PCI_BASE_ADDRESS_MEM_MASK;
227 sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK;
228 mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK;
229 }
230 } else {
231 if (l & PCI_ROM_ADDRESS_ENABLE)
232 res->flags |= IORESOURCE_ROM_ENABLE;
233 l64 = l & PCI_ROM_ADDRESS_MASK;
234 sz64 = sz & PCI_ROM_ADDRESS_MASK;
235 mask64 = PCI_ROM_ADDRESS_MASK;
236 }
237
238 if (res->flags & IORESOURCE_MEM_64) {
239 pci_read_config_dword(dev, pos + 4, &l);
240 pci_write_config_dword(dev, pos + 4, ~0);
241 pci_read_config_dword(dev, pos + 4, &sz);
242 pci_write_config_dword(dev, pos + 4, l);
243
244 l64 |= ((u64)l << 32);
245 sz64 |= ((u64)sz << 32);
246 mask64 |= ((u64)~0 << 32);
247 }
248
249 if (!dev->mmio_always_on && (orig_cmd & PCI_COMMAND_DECODE_ENABLE))
250 pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
251
252 if (!sz64)
253 goto fail;
254
255 sz64 = pci_size(l64, sz64, mask64);
256 if (!sz64) {
257 pci_info(dev, FW_BUG "reg 0x%x: invalid BAR (can't size)\n",
258 pos);
259 goto fail;
260 }
261
262 if (res->flags & IORESOURCE_MEM_64) {
263 if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
264 && sz64 > 0x100000000ULL) {
265 res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
266 res->start = 0;
267 res->end = 0;
268 pci_err(dev, "reg 0x%x: can't handle BAR larger than 4GB (size %#010llx)\n",
269 pos, (unsigned long long)sz64);
270 goto out;
271 }
272
273 if ((sizeof(pci_bus_addr_t) < 8) && l) {
274 /* Above 32-bit boundary; try to reallocate */
275 res->flags |= IORESOURCE_UNSET;
276 res->start = 0;
277 res->end = sz64 - 1;
278 pci_info(dev, "reg 0x%x: can't handle BAR above 4GB (bus address %#010llx)\n",
279 pos, (unsigned long long)l64);
280 goto out;
281 }
282 }
283
284 region.start = l64;
285 region.end = l64 + sz64 - 1;
286
287 pcibios_bus_to_resource(dev->bus, res, ®ion);
288 pcibios_resource_to_bus(dev->bus, &inverted_region, res);
289
290 /*
291 * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is
292 * the corresponding resource address (the physical address used by
293 * the CPU. Converting that resource address back to a bus address
294 * should yield the original BAR value:
295 *
296 * resource_to_bus(bus_to_resource(A)) == A
297 *
298 * If it doesn't, CPU accesses to "bus_to_resource(A)" will not
299 * be claimed by the device.
300 */
301 if (inverted_region.start != region.start) {
302 res->flags |= IORESOURCE_UNSET;
303 res->start = 0;
304 res->end = region.end - region.start;
305 pci_info(dev, "reg 0x%x: initial BAR value %#010llx invalid\n",
306 pos, (unsigned long long)region.start);
307 }
308
309 goto out;
310
311
312fail:
313 res->flags = 0;
314out:
315 if (res->flags)
316 pci_info(dev, "reg 0x%x: %pR\n", pos, res);
317
318 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
319}
320
321static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
322{
323 unsigned int pos, reg;
324
325 if (dev->non_compliant_bars)
326 return;
327
328 /* Per PCIe r4.0, sec 9.3.4.1.11, the VF BARs are all RO Zero */
329 if (dev->is_virtfn)
330 return;
331
332 for (pos = 0; pos < howmany; pos++) {
333 struct resource *res = &dev->resource[pos];
334 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
335 pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
336 }
337
338 if (rom) {
339 struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
340 dev->rom_base_reg = rom;
341 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
342 IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
343 __pci_read_base(dev, pci_bar_mem32, res, rom);
344 }
345}
346
347static void pci_read_bridge_windows(struct pci_dev *bridge)
348{
349 u16 io;
350 u32 pmem, tmp;
351
352 pci_read_config_word(bridge, PCI_IO_BASE, &io);
353 if (!io) {
354 pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
355 pci_read_config_word(bridge, PCI_IO_BASE, &io);
356 pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
357 }
358 if (io)
359 bridge->io_window = 1;
360
361 /*
362 * DECchip 21050 pass 2 errata: the bridge may miss an address
363 * disconnect boundary by one PCI data phase. Workaround: do not
364 * use prefetching on this device.
365 */
366 if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
367 return;
368
369 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
370 if (!pmem) {
371 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
372 0xffe0fff0);
373 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
374 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
375 }
376 if (!pmem)
377 return;
378
379 bridge->pref_window = 1;
380
381 if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
382
383 /*
384 * Bridge claims to have a 64-bit prefetchable memory
385 * window; verify that the upper bits are actually
386 * writable.
387 */
388 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &pmem);
389 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
390 0xffffffff);
391 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
392 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, pmem);
393 if (tmp)
394 bridge->pref_64_window = 1;
395 }
396}
397
398static void pci_read_bridge_io(struct pci_bus *child)
399{
400 struct pci_dev *dev = child->self;
401 u8 io_base_lo, io_limit_lo;
402 unsigned long io_mask, io_granularity, base, limit;
403 struct pci_bus_region region;
404 struct resource *res;
405
406 io_mask = PCI_IO_RANGE_MASK;
407 io_granularity = 0x1000;
408 if (dev->io_window_1k) {
409 /* Support 1K I/O space granularity */
410 io_mask = PCI_IO_1K_RANGE_MASK;
411 io_granularity = 0x400;
412 }
413
414 res = child->resource[0];
415 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
416 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
417 base = (io_base_lo & io_mask) << 8;
418 limit = (io_limit_lo & io_mask) << 8;
419
420 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
421 u16 io_base_hi, io_limit_hi;
422
423 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
424 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
425 base |= ((unsigned long) io_base_hi << 16);
426 limit |= ((unsigned long) io_limit_hi << 16);
427 }
428
429 if (base <= limit) {
430 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
431 region.start = base;
432 region.end = limit + io_granularity - 1;
433 pcibios_bus_to_resource(dev->bus, res, ®ion);
434 pci_info(dev, " bridge window %pR\n", res);
435 }
436}
437
438static void pci_read_bridge_mmio(struct pci_bus *child)
439{
440 struct pci_dev *dev = child->self;
441 u16 mem_base_lo, mem_limit_lo;
442 unsigned long base, limit;
443 struct pci_bus_region region;
444 struct resource *res;
445
446 res = child->resource[1];
447 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
448 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
449 base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
450 limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
451 if (base <= limit) {
452 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
453 region.start = base;
454 region.end = limit + 0xfffff;
455 pcibios_bus_to_resource(dev->bus, res, ®ion);
456 pci_info(dev, " bridge window %pR\n", res);
457 }
458}
459
460static void pci_read_bridge_mmio_pref(struct pci_bus *child)
461{
462 struct pci_dev *dev = child->self;
463 u16 mem_base_lo, mem_limit_lo;
464 u64 base64, limit64;
465 pci_bus_addr_t base, limit;
466 struct pci_bus_region region;
467 struct resource *res;
468
469 res = child->resource[2];
470 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
471 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
472 base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
473 limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
474
475 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
476 u32 mem_base_hi, mem_limit_hi;
477
478 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
479 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
480
481 /*
482 * Some bridges set the base > limit by default, and some
483 * (broken) BIOSes do not initialize them. If we find
484 * this, just assume they are not being used.
485 */
486 if (mem_base_hi <= mem_limit_hi) {
487 base64 |= (u64) mem_base_hi << 32;
488 limit64 |= (u64) mem_limit_hi << 32;
489 }
490 }
491
492 base = (pci_bus_addr_t) base64;
493 limit = (pci_bus_addr_t) limit64;
494
495 if (base != base64) {
496 pci_err(dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
497 (unsigned long long) base64);
498 return;
499 }
500
501 if (base <= limit) {
502 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
503 IORESOURCE_MEM | IORESOURCE_PREFETCH;
504 if (res->flags & PCI_PREF_RANGE_TYPE_64)
505 res->flags |= IORESOURCE_MEM_64;
506 region.start = base;
507 region.end = limit + 0xfffff;
508 pcibios_bus_to_resource(dev->bus, res, ®ion);
509 pci_info(dev, " bridge window %pR\n", res);
510 }
511}
512
513void pci_read_bridge_bases(struct pci_bus *child)
514{
515 struct pci_dev *dev = child->self;
516 struct resource *res;
517 int i;
518
519 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
520 return;
521
522 pci_info(dev, "PCI bridge to %pR%s\n",
523 &child->busn_res,
524 dev->transparent ? " (subtractive decode)" : "");
525
526 pci_bus_remove_resources(child);
527 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
528 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
529
530 pci_read_bridge_io(child);
531 pci_read_bridge_mmio(child);
532 pci_read_bridge_mmio_pref(child);
533
534 if (dev->transparent) {
535 pci_bus_for_each_resource(child->parent, res, i) {
536 if (res && res->flags) {
537 pci_bus_add_resource(child, res,
538 PCI_SUBTRACTIVE_DECODE);
539 pci_info(dev, " bridge window %pR (subtractive decode)\n",
540 res);
541 }
542 }
543 }
544}
545
546static struct pci_bus *pci_alloc_bus(struct pci_bus *parent)
547{
548 struct pci_bus *b;
549
550 b = kzalloc(sizeof(*b), GFP_KERNEL);
551 if (!b)
552 return NULL;
553
554 INIT_LIST_HEAD(&b->node);
555 INIT_LIST_HEAD(&b->children);
556 INIT_LIST_HEAD(&b->devices);
557 INIT_LIST_HEAD(&b->slots);
558 INIT_LIST_HEAD(&b->resources);
559 b->max_bus_speed = PCI_SPEED_UNKNOWN;
560 b->cur_bus_speed = PCI_SPEED_UNKNOWN;
561#ifdef CONFIG_PCI_DOMAINS_GENERIC
562 if (parent)
563 b->domain_nr = parent->domain_nr;
564#endif
565 return b;
566}
567
568static void pci_release_host_bridge_dev(struct device *dev)
569{
570 struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
571
572 if (bridge->release_fn)
573 bridge->release_fn(bridge);
574
575 pci_free_resource_list(&bridge->windows);
576 pci_free_resource_list(&bridge->dma_ranges);
577 kfree(bridge);
578}
579
580static void pci_init_host_bridge(struct pci_host_bridge *bridge)
581{
582 INIT_LIST_HEAD(&bridge->windows);
583 INIT_LIST_HEAD(&bridge->dma_ranges);
584
585 /*
586 * We assume we can manage these PCIe features. Some systems may
587 * reserve these for use by the platform itself, e.g., an ACPI BIOS
588 * may implement its own AER handling and use _OSC to prevent the
589 * OS from interfering.
590 */
591 bridge->native_aer = 1;
592 bridge->native_pcie_hotplug = 1;
593 bridge->native_shpc_hotplug = 1;
594 bridge->native_pme = 1;
595 bridge->native_ltr = 1;
596 bridge->native_dpc = 1;
597
598 device_initialize(&bridge->dev);
599}
600
601struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
602{
603 struct pci_host_bridge *bridge;
604
605 bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
606 if (!bridge)
607 return NULL;
608
609 pci_init_host_bridge(bridge);
610 bridge->dev.release = pci_release_host_bridge_dev;
611
612 return bridge;
613}
614EXPORT_SYMBOL(pci_alloc_host_bridge);
615
616static void devm_pci_alloc_host_bridge_release(void *data)
617{
618 pci_free_host_bridge(data);
619}
620
621struct pci_host_bridge *devm_pci_alloc_host_bridge(struct device *dev,
622 size_t priv)
623{
624 int ret;
625 struct pci_host_bridge *bridge;
626
627 bridge = pci_alloc_host_bridge(priv);
628 if (!bridge)
629 return NULL;
630
631 bridge->dev.parent = dev;
632
633 ret = devm_add_action_or_reset(dev, devm_pci_alloc_host_bridge_release,
634 bridge);
635 if (ret)
636 return NULL;
637
638 ret = devm_of_pci_bridge_init(dev, bridge);
639 if (ret)
640 return NULL;
641
642 return bridge;
643}
644EXPORT_SYMBOL(devm_pci_alloc_host_bridge);
645
646void pci_free_host_bridge(struct pci_host_bridge *bridge)
647{
648 put_device(&bridge->dev);
649}
650EXPORT_SYMBOL(pci_free_host_bridge);
651
652/* Indexed by PCI_X_SSTATUS_FREQ (secondary bus mode and frequency) */
653static const unsigned char pcix_bus_speed[] = {
654 PCI_SPEED_UNKNOWN, /* 0 */
655 PCI_SPEED_66MHz_PCIX, /* 1 */
656 PCI_SPEED_100MHz_PCIX, /* 2 */
657 PCI_SPEED_133MHz_PCIX, /* 3 */
658 PCI_SPEED_UNKNOWN, /* 4 */
659 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
660 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
661 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
662 PCI_SPEED_UNKNOWN, /* 8 */
663 PCI_SPEED_66MHz_PCIX_266, /* 9 */
664 PCI_SPEED_100MHz_PCIX_266, /* A */
665 PCI_SPEED_133MHz_PCIX_266, /* B */
666 PCI_SPEED_UNKNOWN, /* C */
667 PCI_SPEED_66MHz_PCIX_533, /* D */
668 PCI_SPEED_100MHz_PCIX_533, /* E */
669 PCI_SPEED_133MHz_PCIX_533 /* F */
670};
671
672/* Indexed by PCI_EXP_LNKCAP_SLS, PCI_EXP_LNKSTA_CLS */
673const unsigned char pcie_link_speed[] = {
674 PCI_SPEED_UNKNOWN, /* 0 */
675 PCIE_SPEED_2_5GT, /* 1 */
676 PCIE_SPEED_5_0GT, /* 2 */
677 PCIE_SPEED_8_0GT, /* 3 */
678 PCIE_SPEED_16_0GT, /* 4 */
679 PCIE_SPEED_32_0GT, /* 5 */
680 PCI_SPEED_UNKNOWN, /* 6 */
681 PCI_SPEED_UNKNOWN, /* 7 */
682 PCI_SPEED_UNKNOWN, /* 8 */
683 PCI_SPEED_UNKNOWN, /* 9 */
684 PCI_SPEED_UNKNOWN, /* A */
685 PCI_SPEED_UNKNOWN, /* B */
686 PCI_SPEED_UNKNOWN, /* C */
687 PCI_SPEED_UNKNOWN, /* D */
688 PCI_SPEED_UNKNOWN, /* E */
689 PCI_SPEED_UNKNOWN /* F */
690};
691EXPORT_SYMBOL_GPL(pcie_link_speed);
692
693const char *pci_speed_string(enum pci_bus_speed speed)
694{
695 /* Indexed by the pci_bus_speed enum */
696 static const char *speed_strings[] = {
697 "33 MHz PCI", /* 0x00 */
698 "66 MHz PCI", /* 0x01 */
699 "66 MHz PCI-X", /* 0x02 */
700 "100 MHz PCI-X", /* 0x03 */
701 "133 MHz PCI-X", /* 0x04 */
702 NULL, /* 0x05 */
703 NULL, /* 0x06 */
704 NULL, /* 0x07 */
705 NULL, /* 0x08 */
706 "66 MHz PCI-X 266", /* 0x09 */
707 "100 MHz PCI-X 266", /* 0x0a */
708 "133 MHz PCI-X 266", /* 0x0b */
709 "Unknown AGP", /* 0x0c */
710 "1x AGP", /* 0x0d */
711 "2x AGP", /* 0x0e */
712 "4x AGP", /* 0x0f */
713 "8x AGP", /* 0x10 */
714 "66 MHz PCI-X 533", /* 0x11 */
715 "100 MHz PCI-X 533", /* 0x12 */
716 "133 MHz PCI-X 533", /* 0x13 */
717 "2.5 GT/s PCIe", /* 0x14 */
718 "5.0 GT/s PCIe", /* 0x15 */
719 "8.0 GT/s PCIe", /* 0x16 */
720 "16.0 GT/s PCIe", /* 0x17 */
721 "32.0 GT/s PCIe", /* 0x18 */
722 };
723
724 if (speed < ARRAY_SIZE(speed_strings))
725 return speed_strings[speed];
726 return "Unknown";
727}
728EXPORT_SYMBOL_GPL(pci_speed_string);
729
730void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
731{
732 bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS];
733}
734EXPORT_SYMBOL_GPL(pcie_update_link_speed);
735
736static unsigned char agp_speeds[] = {
737 AGP_UNKNOWN,
738 AGP_1X,
739 AGP_2X,
740 AGP_4X,
741 AGP_8X
742};
743
744static enum pci_bus_speed agp_speed(int agp3, int agpstat)
745{
746 int index = 0;
747
748 if (agpstat & 4)
749 index = 3;
750 else if (agpstat & 2)
751 index = 2;
752 else if (agpstat & 1)
753 index = 1;
754 else
755 goto out;
756
757 if (agp3) {
758 index += 2;
759 if (index == 5)
760 index = 0;
761 }
762
763 out:
764 return agp_speeds[index];
765}
766
767static void pci_set_bus_speed(struct pci_bus *bus)
768{
769 struct pci_dev *bridge = bus->self;
770 int pos;
771
772 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
773 if (!pos)
774 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
775 if (pos) {
776 u32 agpstat, agpcmd;
777
778 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
779 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
780
781 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
782 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
783 }
784
785 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
786 if (pos) {
787 u16 status;
788 enum pci_bus_speed max;
789
790 pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS,
791 &status);
792
793 if (status & PCI_X_SSTATUS_533MHZ) {
794 max = PCI_SPEED_133MHz_PCIX_533;
795 } else if (status & PCI_X_SSTATUS_266MHZ) {
796 max = PCI_SPEED_133MHz_PCIX_266;
797 } else if (status & PCI_X_SSTATUS_133MHZ) {
798 if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2)
799 max = PCI_SPEED_133MHz_PCIX_ECC;
800 else
801 max = PCI_SPEED_133MHz_PCIX;
802 } else {
803 max = PCI_SPEED_66MHz_PCIX;
804 }
805
806 bus->max_bus_speed = max;
807 bus->cur_bus_speed = pcix_bus_speed[
808 (status & PCI_X_SSTATUS_FREQ) >> 6];
809
810 return;
811 }
812
813 if (pci_is_pcie(bridge)) {
814 u32 linkcap;
815 u16 linksta;
816
817 pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap);
818 bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS];
819 bridge->link_active_reporting = !!(linkcap & PCI_EXP_LNKCAP_DLLLARC);
820
821 pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta);
822 pcie_update_link_speed(bus, linksta);
823 }
824}
825
826static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus)
827{
828 struct irq_domain *d;
829
830 /*
831 * Any firmware interface that can resolve the msi_domain
832 * should be called from here.
833 */
834 d = pci_host_bridge_of_msi_domain(bus);
835 if (!d)
836 d = pci_host_bridge_acpi_msi_domain(bus);
837
838#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
839 /*
840 * If no IRQ domain was found via the OF tree, try looking it up
841 * directly through the fwnode_handle.
842 */
843 if (!d) {
844 struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus);
845
846 if (fwnode)
847 d = irq_find_matching_fwnode(fwnode,
848 DOMAIN_BUS_PCI_MSI);
849 }
850#endif
851
852 return d;
853}
854
855static void pci_set_bus_msi_domain(struct pci_bus *bus)
856{
857 struct irq_domain *d;
858 struct pci_bus *b;
859
860 /*
861 * The bus can be a root bus, a subordinate bus, or a virtual bus
862 * created by an SR-IOV device. Walk up to the first bridge device
863 * found or derive the domain from the host bridge.
864 */
865 for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) {
866 if (b->self)
867 d = dev_get_msi_domain(&b->self->dev);
868 }
869
870 if (!d)
871 d = pci_host_bridge_msi_domain(b);
872
873 dev_set_msi_domain(&bus->dev, d);
874}
875
876static int pci_register_host_bridge(struct pci_host_bridge *bridge)
877{
878 struct device *parent = bridge->dev.parent;
879 struct resource_entry *window, *n;
880 struct pci_bus *bus, *b;
881 resource_size_t offset;
882 LIST_HEAD(resources);
883 struct resource *res;
884 char addr[64], *fmt;
885 const char *name;
886 int err;
887
888 bus = pci_alloc_bus(NULL);
889 if (!bus)
890 return -ENOMEM;
891
892 bridge->bus = bus;
893
894 /* Temporarily move resources off the list */
895 list_splice_init(&bridge->windows, &resources);
896 bus->sysdata = bridge->sysdata;
897 bus->msi = bridge->msi;
898 bus->ops = bridge->ops;
899 bus->number = bus->busn_res.start = bridge->busnr;
900#ifdef CONFIG_PCI_DOMAINS_GENERIC
901 bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
902#endif
903
904 b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
905 if (b) {
906 /* Ignore it if we already got here via a different bridge */
907 dev_dbg(&b->dev, "bus already known\n");
908 err = -EEXIST;
909 goto free;
910 }
911
912 dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus),
913 bridge->busnr);
914
915 err = pcibios_root_bridge_prepare(bridge);
916 if (err)
917 goto free;
918
919 err = device_add(&bridge->dev);
920 if (err) {
921 put_device(&bridge->dev);
922 goto free;
923 }
924 bus->bridge = get_device(&bridge->dev);
925 device_enable_async_suspend(bus->bridge);
926 pci_set_bus_of_node(bus);
927 pci_set_bus_msi_domain(bus);
928
929 if (!parent)
930 set_dev_node(bus->bridge, pcibus_to_node(bus));
931
932 bus->dev.class = &pcibus_class;
933 bus->dev.parent = bus->bridge;
934
935 dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number);
936 name = dev_name(&bus->dev);
937
938 err = device_register(&bus->dev);
939 if (err)
940 goto unregister;
941
942 pcibios_add_bus(bus);
943
944 /* Create legacy_io and legacy_mem files for this bus */
945 pci_create_legacy_files(bus);
946
947 if (parent)
948 dev_info(parent, "PCI host bridge to bus %s\n", name);
949 else
950 pr_info("PCI host bridge to bus %s\n", name);
951
952 if (nr_node_ids > 1 && pcibus_to_node(bus) == NUMA_NO_NODE)
953 dev_warn(&bus->dev, "Unknown NUMA node; performance will be reduced\n");
954
955 /* Add initial resources to the bus */
956 resource_list_for_each_entry_safe(window, n, &resources) {
957 list_move_tail(&window->node, &bridge->windows);
958 offset = window->offset;
959 res = window->res;
960
961 if (res->flags & IORESOURCE_BUS)
962 pci_bus_insert_busn_res(bus, bus->number, res->end);
963 else
964 pci_bus_add_resource(bus, res, 0);
965
966 if (offset) {
967 if (resource_type(res) == IORESOURCE_IO)
968 fmt = " (bus address [%#06llx-%#06llx])";
969 else
970 fmt = " (bus address [%#010llx-%#010llx])";
971
972 snprintf(addr, sizeof(addr), fmt,
973 (unsigned long long)(res->start - offset),
974 (unsigned long long)(res->end - offset));
975 } else
976 addr[0] = '\0';
977
978 dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr);
979 }
980
981 down_write(&pci_bus_sem);
982 list_add_tail(&bus->node, &pci_root_buses);
983 up_write(&pci_bus_sem);
984
985 return 0;
986
987unregister:
988 put_device(&bridge->dev);
989 device_del(&bridge->dev);
990
991free:
992 kfree(bus);
993 return err;
994}
995
996static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge)
997{
998 int pos;
999 u32 status;
1000
1001 /*
1002 * If extended config space isn't accessible on a bridge's primary
1003 * bus, we certainly can't access it on the secondary bus.
1004 */
1005 if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
1006 return false;
1007
1008 /*
1009 * PCIe Root Ports and switch ports are PCIe on both sides, so if
1010 * extended config space is accessible on the primary, it's also
1011 * accessible on the secondary.
1012 */
1013 if (pci_is_pcie(bridge) &&
1014 (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT ||
1015 pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM ||
1016 pci_pcie_type(bridge) == PCI_EXP_TYPE_DOWNSTREAM))
1017 return true;
1018
1019 /*
1020 * For the other bridge types:
1021 * - PCI-to-PCI bridges
1022 * - PCIe-to-PCI/PCI-X forward bridges
1023 * - PCI/PCI-X-to-PCIe reverse bridges
1024 * extended config space on the secondary side is only accessible
1025 * if the bridge supports PCI-X Mode 2.
1026 */
1027 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
1028 if (!pos)
1029 return false;
1030
1031 pci_read_config_dword(bridge, pos + PCI_X_STATUS, &status);
1032 return status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ);
1033}
1034
1035static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
1036 struct pci_dev *bridge, int busnr)
1037{
1038 struct pci_bus *child;
1039 int i;
1040 int ret;
1041
1042 /* Allocate a new bus and inherit stuff from the parent */
1043 child = pci_alloc_bus(parent);
1044 if (!child)
1045 return NULL;
1046
1047 child->parent = parent;
1048 child->ops = parent->ops;
1049 child->msi = parent->msi;
1050 child->sysdata = parent->sysdata;
1051 child->bus_flags = parent->bus_flags;
1052
1053 /*
1054 * Initialize some portions of the bus device, but don't register
1055 * it now as the parent is not properly set up yet.
1056 */
1057 child->dev.class = &pcibus_class;
1058 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
1059
1060 /* Set up the primary, secondary and subordinate bus numbers */
1061 child->number = child->busn_res.start = busnr;
1062 child->primary = parent->busn_res.start;
1063 child->busn_res.end = 0xff;
1064
1065 if (!bridge) {
1066 child->dev.parent = parent->bridge;
1067 goto add_dev;
1068 }
1069
1070 child->self = bridge;
1071 child->bridge = get_device(&bridge->dev);
1072 child->dev.parent = child->bridge;
1073 pci_set_bus_of_node(child);
1074 pci_set_bus_speed(child);
1075
1076 /*
1077 * Check whether extended config space is accessible on the child
1078 * bus. Note that we currently assume it is always accessible on
1079 * the root bus.
1080 */
1081 if (!pci_bridge_child_ext_cfg_accessible(bridge)) {
1082 child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG;
1083 pci_info(child, "extended config space not accessible\n");
1084 }
1085
1086 /* Set up default resource pointers and names */
1087 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
1088 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
1089 child->resource[i]->name = child->name;
1090 }
1091 bridge->subordinate = child;
1092
1093add_dev:
1094 pci_set_bus_msi_domain(child);
1095 ret = device_register(&child->dev);
1096 WARN_ON(ret < 0);
1097
1098 pcibios_add_bus(child);
1099
1100 if (child->ops->add_bus) {
1101 ret = child->ops->add_bus(child);
1102 if (WARN_ON(ret < 0))
1103 dev_err(&child->dev, "failed to add bus: %d\n", ret);
1104 }
1105
1106 /* Create legacy_io and legacy_mem files for this bus */
1107 pci_create_legacy_files(child);
1108
1109 return child;
1110}
1111
1112struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
1113 int busnr)
1114{
1115 struct pci_bus *child;
1116
1117 child = pci_alloc_child_bus(parent, dev, busnr);
1118 if (child) {
1119 down_write(&pci_bus_sem);
1120 list_add_tail(&child->node, &parent->children);
1121 up_write(&pci_bus_sem);
1122 }
1123 return child;
1124}
1125EXPORT_SYMBOL(pci_add_new_bus);
1126
1127static void pci_enable_crs(struct pci_dev *pdev)
1128{
1129 u16 root_cap = 0;
1130
1131 /* Enable CRS Software Visibility if supported */
1132 pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap);
1133 if (root_cap & PCI_EXP_RTCAP_CRSVIS)
1134 pcie_capability_set_word(pdev, PCI_EXP_RTCTL,
1135 PCI_EXP_RTCTL_CRSSVE);
1136}
1137
1138static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
1139 unsigned int available_buses);
1140/**
1141 * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus
1142 * numbers from EA capability.
1143 * @dev: Bridge
1144 * @sec: updated with secondary bus number from EA
1145 * @sub: updated with subordinate bus number from EA
1146 *
1147 * If @dev is a bridge with EA capability that specifies valid secondary
1148 * and subordinate bus numbers, return true with the bus numbers in @sec
1149 * and @sub. Otherwise return false.
1150 */
1151static bool pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *sec, u8 *sub)
1152{
1153 int ea, offset;
1154 u32 dw;
1155 u8 ea_sec, ea_sub;
1156
1157 if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
1158 return false;
1159
1160 /* find PCI EA capability in list */
1161 ea = pci_find_capability(dev, PCI_CAP_ID_EA);
1162 if (!ea)
1163 return false;
1164
1165 offset = ea + PCI_EA_FIRST_ENT;
1166 pci_read_config_dword(dev, offset, &dw);
1167 ea_sec = dw & PCI_EA_SEC_BUS_MASK;
1168 ea_sub = (dw & PCI_EA_SUB_BUS_MASK) >> PCI_EA_SUB_BUS_SHIFT;
1169 if (ea_sec == 0 || ea_sub < ea_sec)
1170 return false;
1171
1172 *sec = ea_sec;
1173 *sub = ea_sub;
1174 return true;
1175}
1176
1177/*
1178 * pci_scan_bridge_extend() - Scan buses behind a bridge
1179 * @bus: Parent bus the bridge is on
1180 * @dev: Bridge itself
1181 * @max: Starting subordinate number of buses behind this bridge
1182 * @available_buses: Total number of buses available for this bridge and
1183 * the devices below. After the minimal bus space has
1184 * been allocated the remaining buses will be
1185 * distributed equally between hotplug-capable bridges.
1186 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1187 * that need to be reconfigured.
1188 *
1189 * If it's a bridge, configure it and scan the bus behind it.
1190 * For CardBus bridges, we don't scan behind as the devices will
1191 * be handled by the bridge driver itself.
1192 *
1193 * We need to process bridges in two passes -- first we scan those
1194 * already configured by the BIOS and after we are done with all of
1195 * them, we proceed to assigning numbers to the remaining buses in
1196 * order to avoid overlaps between old and new bus numbers.
1197 *
1198 * Return: New subordinate number covering all buses behind this bridge.
1199 */
1200static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
1201 int max, unsigned int available_buses,
1202 int pass)
1203{
1204 struct pci_bus *child;
1205 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
1206 u32 buses, i, j = 0;
1207 u16 bctl;
1208 u8 primary, secondary, subordinate;
1209 int broken = 0;
1210 bool fixed_buses;
1211 u8 fixed_sec, fixed_sub;
1212 int next_busnr;
1213
1214 /*
1215 * Make sure the bridge is powered on to be able to access config
1216 * space of devices below it.
1217 */
1218 pm_runtime_get_sync(&dev->dev);
1219
1220 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
1221 primary = buses & 0xFF;
1222 secondary = (buses >> 8) & 0xFF;
1223 subordinate = (buses >> 16) & 0xFF;
1224
1225 pci_dbg(dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
1226 secondary, subordinate, pass);
1227
1228 if (!primary && (primary != bus->number) && secondary && subordinate) {
1229 pci_warn(dev, "Primary bus is hard wired to 0\n");
1230 primary = bus->number;
1231 }
1232
1233 /* Check if setup is sensible at all */
1234 if (!pass &&
1235 (primary != bus->number || secondary <= bus->number ||
1236 secondary > subordinate)) {
1237 pci_info(dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
1238 secondary, subordinate);
1239 broken = 1;
1240 }
1241
1242 /*
1243 * Disable Master-Abort Mode during probing to avoid reporting of
1244 * bus errors in some architectures.
1245 */
1246 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
1247 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
1248 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
1249
1250 pci_enable_crs(dev);
1251
1252 if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
1253 !is_cardbus && !broken) {
1254 unsigned int cmax;
1255
1256 /*
1257 * Bus already configured by firmware, process it in the
1258 * first pass and just note the configuration.
1259 */
1260 if (pass)
1261 goto out;
1262
1263 /*
1264 * The bus might already exist for two reasons: Either we
1265 * are rescanning the bus or the bus is reachable through
1266 * more than one bridge. The second case can happen with
1267 * the i450NX chipset.
1268 */
1269 child = pci_find_bus(pci_domain_nr(bus), secondary);
1270 if (!child) {
1271 child = pci_add_new_bus(bus, dev, secondary);
1272 if (!child)
1273 goto out;
1274 child->primary = primary;
1275 pci_bus_insert_busn_res(child, secondary, subordinate);
1276 child->bridge_ctl = bctl;
1277 }
1278
1279 cmax = pci_scan_child_bus(child);
1280 if (cmax > subordinate)
1281 pci_warn(dev, "bridge has subordinate %02x but max busn %02x\n",
1282 subordinate, cmax);
1283
1284 /* Subordinate should equal child->busn_res.end */
1285 if (subordinate > max)
1286 max = subordinate;
1287 } else {
1288
1289 /*
1290 * We need to assign a number to this bus which we always
1291 * do in the second pass.
1292 */
1293 if (!pass) {
1294 if (pcibios_assign_all_busses() || broken || is_cardbus)
1295
1296 /*
1297 * Temporarily disable forwarding of the
1298 * configuration cycles on all bridges in
1299 * this bus segment to avoid possible
1300 * conflicts in the second pass between two
1301 * bridges programmed with overlapping bus
1302 * ranges.
1303 */
1304 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
1305 buses & ~0xffffff);
1306 goto out;
1307 }
1308
1309 /* Clear errors */
1310 pci_write_config_word(dev, PCI_STATUS, 0xffff);
1311
1312 /* Read bus numbers from EA Capability (if present) */
1313 fixed_buses = pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub);
1314 if (fixed_buses)
1315 next_busnr = fixed_sec;
1316 else
1317 next_busnr = max + 1;
1318
1319 /*
1320 * Prevent assigning a bus number that already exists.
1321 * This can happen when a bridge is hot-plugged, so in this
1322 * case we only re-scan this bus.
1323 */
1324 child = pci_find_bus(pci_domain_nr(bus), next_busnr);
1325 if (!child) {
1326 child = pci_add_new_bus(bus, dev, next_busnr);
1327 if (!child)
1328 goto out;
1329 pci_bus_insert_busn_res(child, next_busnr,
1330 bus->busn_res.end);
1331 }
1332 max++;
1333 if (available_buses)
1334 available_buses--;
1335
1336 buses = (buses & 0xff000000)
1337 | ((unsigned int)(child->primary) << 0)
1338 | ((unsigned int)(child->busn_res.start) << 8)
1339 | ((unsigned int)(child->busn_res.end) << 16);
1340
1341 /*
1342 * yenta.c forces a secondary latency timer of 176.
1343 * Copy that behaviour here.
1344 */
1345 if (is_cardbus) {
1346 buses &= ~0xff000000;
1347 buses |= CARDBUS_LATENCY_TIMER << 24;
1348 }
1349
1350 /* We need to blast all three values with a single write */
1351 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
1352
1353 if (!is_cardbus) {
1354 child->bridge_ctl = bctl;
1355 max = pci_scan_child_bus_extend(child, available_buses);
1356 } else {
1357
1358 /*
1359 * For CardBus bridges, we leave 4 bus numbers as
1360 * cards with a PCI-to-PCI bridge can be inserted
1361 * later.
1362 */
1363 for (i = 0; i < CARDBUS_RESERVE_BUSNR; i++) {
1364 struct pci_bus *parent = bus;
1365 if (pci_find_bus(pci_domain_nr(bus),
1366 max+i+1))
1367 break;
1368 while (parent->parent) {
1369 if ((!pcibios_assign_all_busses()) &&
1370 (parent->busn_res.end > max) &&
1371 (parent->busn_res.end <= max+i)) {
1372 j = 1;
1373 }
1374 parent = parent->parent;
1375 }
1376 if (j) {
1377
1378 /*
1379 * Often, there are two CardBus
1380 * bridges -- try to leave one
1381 * valid bus number for each one.
1382 */
1383 i /= 2;
1384 break;
1385 }
1386 }
1387 max += i;
1388 }
1389
1390 /*
1391 * Set subordinate bus number to its real value.
1392 * If fixed subordinate bus number exists from EA
1393 * capability then use it.
1394 */
1395 if (fixed_buses)
1396 max = fixed_sub;
1397 pci_bus_update_busn_res_end(child, max);
1398 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
1399 }
1400
1401 sprintf(child->name,
1402 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
1403 pci_domain_nr(bus), child->number);
1404
1405 /* Check that all devices are accessible */
1406 while (bus->parent) {
1407 if ((child->busn_res.end > bus->busn_res.end) ||
1408 (child->number > bus->busn_res.end) ||
1409 (child->number < bus->number) ||
1410 (child->busn_res.end < bus->number)) {
1411 dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n",
1412 &child->busn_res);
1413 break;
1414 }
1415 bus = bus->parent;
1416 }
1417
1418out:
1419 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
1420
1421 pm_runtime_put(&dev->dev);
1422
1423 return max;
1424}
1425
1426/*
1427 * pci_scan_bridge() - Scan buses behind a bridge
1428 * @bus: Parent bus the bridge is on
1429 * @dev: Bridge itself
1430 * @max: Starting subordinate number of buses behind this bridge
1431 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1432 * that need to be reconfigured.
1433 *
1434 * If it's a bridge, configure it and scan the bus behind it.
1435 * For CardBus bridges, we don't scan behind as the devices will
1436 * be handled by the bridge driver itself.
1437 *
1438 * We need to process bridges in two passes -- first we scan those
1439 * already configured by the BIOS and after we are done with all of
1440 * them, we proceed to assigning numbers to the remaining buses in
1441 * order to avoid overlaps between old and new bus numbers.
1442 *
1443 * Return: New subordinate number covering all buses behind this bridge.
1444 */
1445int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
1446{
1447 return pci_scan_bridge_extend(bus, dev, max, 0, pass);
1448}
1449EXPORT_SYMBOL(pci_scan_bridge);
1450
1451/*
1452 * Read interrupt line and base address registers.
1453 * The architecture-dependent code can tweak these, of course.
1454 */
1455static void pci_read_irq(struct pci_dev *dev)
1456{
1457 unsigned char irq;
1458
1459 /* VFs are not allowed to use INTx, so skip the config reads */
1460 if (dev->is_virtfn) {
1461 dev->pin = 0;
1462 dev->irq = 0;
1463 return;
1464 }
1465
1466 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
1467 dev->pin = irq;
1468 if (irq)
1469 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
1470 dev->irq = irq;
1471}
1472
1473void set_pcie_port_type(struct pci_dev *pdev)
1474{
1475 int pos;
1476 u16 reg16;
1477 int type;
1478 struct pci_dev *parent;
1479
1480 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
1481 if (!pos)
1482 return;
1483
1484 pdev->pcie_cap = pos;
1485 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
1486 pdev->pcie_flags_reg = reg16;
1487 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
1488 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
1489
1490 parent = pci_upstream_bridge(pdev);
1491 if (!parent)
1492 return;
1493
1494 /*
1495 * Some systems do not identify their upstream/downstream ports
1496 * correctly so detect impossible configurations here and correct
1497 * the port type accordingly.
1498 */
1499 type = pci_pcie_type(pdev);
1500 if (type == PCI_EXP_TYPE_DOWNSTREAM) {
1501 /*
1502 * If pdev claims to be downstream port but the parent
1503 * device is also downstream port assume pdev is actually
1504 * upstream port.
1505 */
1506 if (pcie_downstream_port(parent)) {
1507 pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n");
1508 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1509 pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM;
1510 }
1511 } else if (type == PCI_EXP_TYPE_UPSTREAM) {
1512 /*
1513 * If pdev claims to be upstream port but the parent
1514 * device is also upstream port assume pdev is actually
1515 * downstream port.
1516 */
1517 if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) {
1518 pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n");
1519 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1520 pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM;
1521 }
1522 }
1523}
1524
1525void set_pcie_hotplug_bridge(struct pci_dev *pdev)
1526{
1527 u32 reg32;
1528
1529 pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32);
1530 if (reg32 & PCI_EXP_SLTCAP_HPC)
1531 pdev->is_hotplug_bridge = 1;
1532}
1533
1534static void set_pcie_thunderbolt(struct pci_dev *dev)
1535{
1536 int vsec = 0;
1537 u32 header;
1538
1539 while ((vsec = pci_find_next_ext_capability(dev, vsec,
1540 PCI_EXT_CAP_ID_VNDR))) {
1541 pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER, &header);
1542
1543 /* Is the device part of a Thunderbolt controller? */
1544 if (dev->vendor == PCI_VENDOR_ID_INTEL &&
1545 PCI_VNDR_HEADER_ID(header) == PCI_VSEC_ID_INTEL_TBT) {
1546 dev->is_thunderbolt = 1;
1547 return;
1548 }
1549 }
1550}
1551
1552static void set_pcie_untrusted(struct pci_dev *dev)
1553{
1554 struct pci_dev *parent;
1555
1556 /*
1557 * If the upstream bridge is untrusted we treat this device
1558 * untrusted as well.
1559 */
1560 parent = pci_upstream_bridge(dev);
1561 if (parent && (parent->untrusted || parent->external_facing))
1562 dev->untrusted = true;
1563}
1564
1565/**
1566 * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config?
1567 * @dev: PCI device
1568 *
1569 * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that
1570 * when forwarding a type1 configuration request the bridge must check that
1571 * the extended register address field is zero. The bridge is not permitted
1572 * to forward the transactions and must handle it as an Unsupported Request.
1573 * Some bridges do not follow this rule and simply drop the extended register
1574 * bits, resulting in the standard config space being aliased, every 256
1575 * bytes across the entire configuration space. Test for this condition by
1576 * comparing the first dword of each potential alias to the vendor/device ID.
1577 * Known offenders:
1578 * ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03)
1579 * AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40)
1580 */
1581static bool pci_ext_cfg_is_aliased(struct pci_dev *dev)
1582{
1583#ifdef CONFIG_PCI_QUIRKS
1584 int pos;
1585 u32 header, tmp;
1586
1587 pci_read_config_dword(dev, PCI_VENDOR_ID, &header);
1588
1589 for (pos = PCI_CFG_SPACE_SIZE;
1590 pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) {
1591 if (pci_read_config_dword(dev, pos, &tmp) != PCIBIOS_SUCCESSFUL
1592 || header != tmp)
1593 return false;
1594 }
1595
1596 return true;
1597#else
1598 return false;
1599#endif
1600}
1601
1602/**
1603 * pci_cfg_space_size - Get the configuration space size of the PCI device
1604 * @dev: PCI device
1605 *
1606 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
1607 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
1608 * access it. Maybe we don't have a way to generate extended config space
1609 * accesses, or the device is behind a reverse Express bridge. So we try
1610 * reading the dword at 0x100 which must either be 0 or a valid extended
1611 * capability header.
1612 */
1613static int pci_cfg_space_size_ext(struct pci_dev *dev)
1614{
1615 u32 status;
1616 int pos = PCI_CFG_SPACE_SIZE;
1617
1618 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
1619 return PCI_CFG_SPACE_SIZE;
1620 if (status == 0xffffffff || pci_ext_cfg_is_aliased(dev))
1621 return PCI_CFG_SPACE_SIZE;
1622
1623 return PCI_CFG_SPACE_EXP_SIZE;
1624}
1625
1626int pci_cfg_space_size(struct pci_dev *dev)
1627{
1628 int pos;
1629 u32 status;
1630 u16 class;
1631
1632#ifdef CONFIG_PCI_IOV
1633 /*
1634 * Per the SR-IOV specification (rev 1.1, sec 3.5), VFs are required to
1635 * implement a PCIe capability and therefore must implement extended
1636 * config space. We can skip the NO_EXTCFG test below and the
1637 * reachability/aliasing test in pci_cfg_space_size_ext() by virtue of
1638 * the fact that the SR-IOV capability on the PF resides in extended
1639 * config space and must be accessible and non-aliased to have enabled
1640 * support for this VF. This is a micro performance optimization for
1641 * systems supporting many VFs.
1642 */
1643 if (dev->is_virtfn)
1644 return PCI_CFG_SPACE_EXP_SIZE;
1645#endif
1646
1647 if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
1648 return PCI_CFG_SPACE_SIZE;
1649
1650 class = dev->class >> 8;
1651 if (class == PCI_CLASS_BRIDGE_HOST)
1652 return pci_cfg_space_size_ext(dev);
1653
1654 if (pci_is_pcie(dev))
1655 return pci_cfg_space_size_ext(dev);
1656
1657 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
1658 if (!pos)
1659 return PCI_CFG_SPACE_SIZE;
1660
1661 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
1662 if (status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ))
1663 return pci_cfg_space_size_ext(dev);
1664
1665 return PCI_CFG_SPACE_SIZE;
1666}
1667
1668static u32 pci_class(struct pci_dev *dev)
1669{
1670 u32 class;
1671
1672#ifdef CONFIG_PCI_IOV
1673 if (dev->is_virtfn)
1674 return dev->physfn->sriov->class;
1675#endif
1676 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
1677 return class;
1678}
1679
1680static void pci_subsystem_ids(struct pci_dev *dev, u16 *vendor, u16 *device)
1681{
1682#ifdef CONFIG_PCI_IOV
1683 if (dev->is_virtfn) {
1684 *vendor = dev->physfn->sriov->subsystem_vendor;
1685 *device = dev->physfn->sriov->subsystem_device;
1686 return;
1687 }
1688#endif
1689 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, vendor);
1690 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, device);
1691}
1692
1693static u8 pci_hdr_type(struct pci_dev *dev)
1694{
1695 u8 hdr_type;
1696
1697#ifdef CONFIG_PCI_IOV
1698 if (dev->is_virtfn)
1699 return dev->physfn->sriov->hdr_type;
1700#endif
1701 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
1702 return hdr_type;
1703}
1704
1705#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
1706
1707static void pci_msi_setup_pci_dev(struct pci_dev *dev)
1708{
1709 /*
1710 * Disable the MSI hardware to avoid screaming interrupts
1711 * during boot. This is the power on reset default so
1712 * usually this should be a noop.
1713 */
1714 dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
1715 if (dev->msi_cap)
1716 pci_msi_set_enable(dev, 0);
1717
1718 dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
1719 if (dev->msix_cap)
1720 pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
1721}
1722
1723/**
1724 * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability
1725 * @dev: PCI device
1726 *
1727 * Test whether PCI_COMMAND_INTX_DISABLE is writable for @dev. Check this
1728 * at enumeration-time to avoid modifying PCI_COMMAND at run-time.
1729 */
1730static int pci_intx_mask_broken(struct pci_dev *dev)
1731{
1732 u16 orig, toggle, new;
1733
1734 pci_read_config_word(dev, PCI_COMMAND, &orig);
1735 toggle = orig ^ PCI_COMMAND_INTX_DISABLE;
1736 pci_write_config_word(dev, PCI_COMMAND, toggle);
1737 pci_read_config_word(dev, PCI_COMMAND, &new);
1738
1739 pci_write_config_word(dev, PCI_COMMAND, orig);
1740
1741 /*
1742 * PCI_COMMAND_INTX_DISABLE was reserved and read-only prior to PCI
1743 * r2.3, so strictly speaking, a device is not *broken* if it's not
1744 * writable. But we'll live with the misnomer for now.
1745 */
1746 if (new != toggle)
1747 return 1;
1748 return 0;
1749}
1750
1751static void early_dump_pci_device(struct pci_dev *pdev)
1752{
1753 u32 value[256 / 4];
1754 int i;
1755
1756 pci_info(pdev, "config space:\n");
1757
1758 for (i = 0; i < 256; i += 4)
1759 pci_read_config_dword(pdev, i, &value[i / 4]);
1760
1761 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
1762 value, 256, false);
1763}
1764
1765/**
1766 * pci_setup_device - Fill in class and map information of a device
1767 * @dev: the device structure to fill
1768 *
1769 * Initialize the device structure with information about the device's
1770 * vendor,class,memory and IO-space addresses, IRQ lines etc.
1771 * Called at initialisation of the PCI subsystem and by CardBus services.
1772 * Returns 0 on success and negative if unknown type of device (not normal,
1773 * bridge or CardBus).
1774 */
1775int pci_setup_device(struct pci_dev *dev)
1776{
1777 u32 class;
1778 u16 cmd;
1779 u8 hdr_type;
1780 int pos = 0;
1781 struct pci_bus_region region;
1782 struct resource *res;
1783
1784 hdr_type = pci_hdr_type(dev);
1785
1786 dev->sysdata = dev->bus->sysdata;
1787 dev->dev.parent = dev->bus->bridge;
1788 dev->dev.bus = &pci_bus_type;
1789 dev->hdr_type = hdr_type & 0x7f;
1790 dev->multifunction = !!(hdr_type & 0x80);
1791 dev->error_state = pci_channel_io_normal;
1792 set_pcie_port_type(dev);
1793
1794 pci_dev_assign_slot(dev);
1795
1796 /*
1797 * Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
1798 * set this higher, assuming the system even supports it.
1799 */
1800 dev->dma_mask = 0xffffffff;
1801
1802 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
1803 dev->bus->number, PCI_SLOT(dev->devfn),
1804 PCI_FUNC(dev->devfn));
1805
1806 class = pci_class(dev);
1807
1808 dev->revision = class & 0xff;
1809 dev->class = class >> 8; /* upper 3 bytes */
1810
1811 if (pci_early_dump)
1812 early_dump_pci_device(dev);
1813
1814 /* Need to have dev->class ready */
1815 dev->cfg_size = pci_cfg_space_size(dev);
1816
1817 /* Need to have dev->cfg_size ready */
1818 set_pcie_thunderbolt(dev);
1819
1820 set_pcie_untrusted(dev);
1821
1822 /* "Unknown power state" */
1823 dev->current_state = PCI_UNKNOWN;
1824
1825 /* Early fixups, before probing the BARs */
1826 pci_fixup_device(pci_fixup_early, dev);
1827
1828 pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
1829 dev->vendor, dev->device, dev->hdr_type, dev->class);
1830
1831 /* Device class may be changed after fixup */
1832 class = dev->class >> 8;
1833
1834 if (dev->non_compliant_bars && !dev->mmio_always_on) {
1835 pci_read_config_word(dev, PCI_COMMAND, &cmd);
1836 if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
1837 pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
1838 cmd &= ~PCI_COMMAND_IO;
1839 cmd &= ~PCI_COMMAND_MEMORY;
1840 pci_write_config_word(dev, PCI_COMMAND, cmd);
1841 }
1842 }
1843
1844 dev->broken_intx_masking = pci_intx_mask_broken(dev);
1845
1846 switch (dev->hdr_type) { /* header type */
1847 case PCI_HEADER_TYPE_NORMAL: /* standard header */
1848 if (class == PCI_CLASS_BRIDGE_PCI)
1849 goto bad;
1850 pci_read_irq(dev);
1851 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
1852
1853 pci_subsystem_ids(dev, &dev->subsystem_vendor, &dev->subsystem_device);
1854
1855 /*
1856 * Do the ugly legacy mode stuff here rather than broken chip
1857 * quirk code. Legacy mode ATA controllers have fixed
1858 * addresses. These are not always echoed in BAR0-3, and
1859 * BAR0-3 in a few cases contain junk!
1860 */
1861 if (class == PCI_CLASS_STORAGE_IDE) {
1862 u8 progif;
1863 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
1864 if ((progif & 1) == 0) {
1865 region.start = 0x1F0;
1866 region.end = 0x1F7;
1867 res = &dev->resource[0];
1868 res->flags = LEGACY_IO_RESOURCE;
1869 pcibios_bus_to_resource(dev->bus, res, ®ion);
1870 pci_info(dev, "legacy IDE quirk: reg 0x10: %pR\n",
1871 res);
1872 region.start = 0x3F6;
1873 region.end = 0x3F6;
1874 res = &dev->resource[1];
1875 res->flags = LEGACY_IO_RESOURCE;
1876 pcibios_bus_to_resource(dev->bus, res, ®ion);
1877 pci_info(dev, "legacy IDE quirk: reg 0x14: %pR\n",
1878 res);
1879 }
1880 if ((progif & 4) == 0) {
1881 region.start = 0x170;
1882 region.end = 0x177;
1883 res = &dev->resource[2];
1884 res->flags = LEGACY_IO_RESOURCE;
1885 pcibios_bus_to_resource(dev->bus, res, ®ion);
1886 pci_info(dev, "legacy IDE quirk: reg 0x18: %pR\n",
1887 res);
1888 region.start = 0x376;
1889 region.end = 0x376;
1890 res = &dev->resource[3];
1891 res->flags = LEGACY_IO_RESOURCE;
1892 pcibios_bus_to_resource(dev->bus, res, ®ion);
1893 pci_info(dev, "legacy IDE quirk: reg 0x1c: %pR\n",
1894 res);
1895 }
1896 }
1897 break;
1898
1899 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
1900 /*
1901 * The PCI-to-PCI bridge spec requires that subtractive
1902 * decoding (i.e. transparent) bridge must have programming
1903 * interface code of 0x01.
1904 */
1905 pci_read_irq(dev);
1906 dev->transparent = ((dev->class & 0xff) == 1);
1907 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
1908 pci_read_bridge_windows(dev);
1909 set_pcie_hotplug_bridge(dev);
1910 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
1911 if (pos) {
1912 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
1913 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
1914 }
1915 break;
1916
1917 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
1918 if (class != PCI_CLASS_BRIDGE_CARDBUS)
1919 goto bad;
1920 pci_read_irq(dev);
1921 pci_read_bases(dev, 1, 0);
1922 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
1923 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
1924 break;
1925
1926 default: /* unknown header */
1927 pci_err(dev, "unknown header type %02x, ignoring device\n",
1928 dev->hdr_type);
1929 return -EIO;
1930
1931 bad:
1932 pci_err(dev, "ignoring class %#08x (doesn't match header type %02x)\n",
1933 dev->class, dev->hdr_type);
1934 dev->class = PCI_CLASS_NOT_DEFINED << 8;
1935 }
1936
1937 /* We found a fine healthy device, go go go... */
1938 return 0;
1939}
1940
1941static void pci_configure_mps(struct pci_dev *dev)
1942{
1943 struct pci_dev *bridge = pci_upstream_bridge(dev);
1944 int mps, mpss, p_mps, rc;
1945
1946 if (!pci_is_pcie(dev))
1947 return;
1948
1949 /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
1950 if (dev->is_virtfn)
1951 return;
1952
1953 /*
1954 * For Root Complex Integrated Endpoints, program the maximum
1955 * supported value unless limited by the PCIE_BUS_PEER2PEER case.
1956 */
1957 if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
1958 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
1959 mps = 128;
1960 else
1961 mps = 128 << dev->pcie_mpss;
1962 rc = pcie_set_mps(dev, mps);
1963 if (rc) {
1964 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
1965 mps);
1966 }
1967 return;
1968 }
1969
1970 if (!bridge || !pci_is_pcie(bridge))
1971 return;
1972
1973 mps = pcie_get_mps(dev);
1974 p_mps = pcie_get_mps(bridge);
1975
1976 if (mps == p_mps)
1977 return;
1978
1979 if (pcie_bus_config == PCIE_BUS_TUNE_OFF) {
1980 pci_warn(dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
1981 mps, pci_name(bridge), p_mps);
1982 return;
1983 }
1984
1985 /*
1986 * Fancier MPS configuration is done later by
1987 * pcie_bus_configure_settings()
1988 */
1989 if (pcie_bus_config != PCIE_BUS_DEFAULT)
1990 return;
1991
1992 mpss = 128 << dev->pcie_mpss;
1993 if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) {
1994 pcie_set_mps(bridge, mpss);
1995 pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n",
1996 mpss, p_mps, 128 << bridge->pcie_mpss);
1997 p_mps = pcie_get_mps(bridge);
1998 }
1999
2000 rc = pcie_set_mps(dev, p_mps);
2001 if (rc) {
2002 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
2003 p_mps);
2004 return;
2005 }
2006
2007 pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n",
2008 p_mps, mps, mpss);
2009}
2010
2011int pci_configure_extended_tags(struct pci_dev *dev, void *ign)
2012{
2013 struct pci_host_bridge *host;
2014 u32 cap;
2015 u16 ctl;
2016 int ret;
2017
2018 if (!pci_is_pcie(dev))
2019 return 0;
2020
2021 ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
2022 if (ret)
2023 return 0;
2024
2025 if (!(cap & PCI_EXP_DEVCAP_EXT_TAG))
2026 return 0;
2027
2028 ret = pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl);
2029 if (ret)
2030 return 0;
2031
2032 host = pci_find_host_bridge(dev->bus);
2033 if (!host)
2034 return 0;
2035
2036 /*
2037 * If some device in the hierarchy doesn't handle Extended Tags
2038 * correctly, make sure they're disabled.
2039 */
2040 if (host->no_ext_tags) {
2041 if (ctl & PCI_EXP_DEVCTL_EXT_TAG) {
2042 pci_info(dev, "disabling Extended Tags\n");
2043 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
2044 PCI_EXP_DEVCTL_EXT_TAG);
2045 }
2046 return 0;
2047 }
2048
2049 if (!(ctl & PCI_EXP_DEVCTL_EXT_TAG)) {
2050 pci_info(dev, "enabling Extended Tags\n");
2051 pcie_capability_set_word(dev, PCI_EXP_DEVCTL,
2052 PCI_EXP_DEVCTL_EXT_TAG);
2053 }
2054 return 0;
2055}
2056
2057/**
2058 * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable
2059 * @dev: PCI device to query
2060 *
2061 * Returns true if the device has enabled relaxed ordering attribute.
2062 */
2063bool pcie_relaxed_ordering_enabled(struct pci_dev *dev)
2064{
2065 u16 v;
2066
2067 pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v);
2068
2069 return !!(v & PCI_EXP_DEVCTL_RELAX_EN);
2070}
2071EXPORT_SYMBOL(pcie_relaxed_ordering_enabled);
2072
2073static void pci_configure_relaxed_ordering(struct pci_dev *dev)
2074{
2075 struct pci_dev *root;
2076
2077 /* PCI_EXP_DEVICE_RELAX_EN is RsvdP in VFs */
2078 if (dev->is_virtfn)
2079 return;
2080
2081 if (!pcie_relaxed_ordering_enabled(dev))
2082 return;
2083
2084 /*
2085 * For now, we only deal with Relaxed Ordering issues with Root
2086 * Ports. Peer-to-Peer DMA is another can of worms.
2087 */
2088 root = pcie_find_root_port(dev);
2089 if (!root)
2090 return;
2091
2092 if (root->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) {
2093 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
2094 PCI_EXP_DEVCTL_RELAX_EN);
2095 pci_info(dev, "Relaxed Ordering disabled because the Root Port didn't support it\n");
2096 }
2097}
2098
2099static void pci_configure_ltr(struct pci_dev *dev)
2100{
2101#ifdef CONFIG_PCIEASPM
2102 struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
2103 struct pci_dev *bridge;
2104 u32 cap, ctl;
2105
2106 if (!pci_is_pcie(dev))
2107 return;
2108
2109 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
2110 if (!(cap & PCI_EXP_DEVCAP2_LTR))
2111 return;
2112
2113 pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl);
2114 if (ctl & PCI_EXP_DEVCTL2_LTR_EN) {
2115 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
2116 dev->ltr_path = 1;
2117 return;
2118 }
2119
2120 bridge = pci_upstream_bridge(dev);
2121 if (bridge && bridge->ltr_path)
2122 dev->ltr_path = 1;
2123
2124 return;
2125 }
2126
2127 if (!host->native_ltr)
2128 return;
2129
2130 /*
2131 * Software must not enable LTR in an Endpoint unless the Root
2132 * Complex and all intermediate Switches indicate support for LTR.
2133 * PCIe r4.0, sec 6.18.
2134 */
2135 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
2136 ((bridge = pci_upstream_bridge(dev)) &&
2137 bridge->ltr_path)) {
2138 pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
2139 PCI_EXP_DEVCTL2_LTR_EN);
2140 dev->ltr_path = 1;
2141 }
2142#endif
2143}
2144
2145static void pci_configure_eetlp_prefix(struct pci_dev *dev)
2146{
2147#ifdef CONFIG_PCI_PASID
2148 struct pci_dev *bridge;
2149 int pcie_type;
2150 u32 cap;
2151
2152 if (!pci_is_pcie(dev))
2153 return;
2154
2155 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
2156 if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
2157 return;
2158
2159 pcie_type = pci_pcie_type(dev);
2160 if (pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
2161 pcie_type == PCI_EXP_TYPE_RC_END)
2162 dev->eetlp_prefix_path = 1;
2163 else {
2164 bridge = pci_upstream_bridge(dev);
2165 if (bridge && bridge->eetlp_prefix_path)
2166 dev->eetlp_prefix_path = 1;
2167 }
2168#endif
2169}
2170
2171static void pci_configure_serr(struct pci_dev *dev)
2172{
2173 u16 control;
2174
2175 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
2176
2177 /*
2178 * A bridge will not forward ERR_ messages coming from an
2179 * endpoint unless SERR# forwarding is enabled.
2180 */
2181 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control);
2182 if (!(control & PCI_BRIDGE_CTL_SERR)) {
2183 control |= PCI_BRIDGE_CTL_SERR;
2184 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control);
2185 }
2186 }
2187}
2188
2189static void pci_configure_device(struct pci_dev *dev)
2190{
2191 pci_configure_mps(dev);
2192 pci_configure_extended_tags(dev, NULL);
2193 pci_configure_relaxed_ordering(dev);
2194 pci_configure_ltr(dev);
2195 pci_configure_eetlp_prefix(dev);
2196 pci_configure_serr(dev);
2197
2198 pci_acpi_program_hp_params(dev);
2199}
2200
2201static void pci_release_capabilities(struct pci_dev *dev)
2202{
2203 pci_aer_exit(dev);
2204 pci_vpd_release(dev);
2205 pci_iov_release(dev);
2206 pci_free_cap_save_buffers(dev);
2207}
2208
2209/**
2210 * pci_release_dev - Free a PCI device structure when all users of it are
2211 * finished
2212 * @dev: device that's been disconnected
2213 *
2214 * Will be called only by the device core when all users of this PCI device are
2215 * done.
2216 */
2217static void pci_release_dev(struct device *dev)
2218{
2219 struct pci_dev *pci_dev;
2220
2221 pci_dev = to_pci_dev(dev);
2222 pci_release_capabilities(pci_dev);
2223 pci_release_of_node(pci_dev);
2224 pcibios_release_device(pci_dev);
2225 pci_bus_put(pci_dev->bus);
2226 kfree(pci_dev->driver_override);
2227 bitmap_free(pci_dev->dma_alias_mask);
2228 kfree(pci_dev);
2229}
2230
2231struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
2232{
2233 struct pci_dev *dev;
2234
2235 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
2236 if (!dev)
2237 return NULL;
2238
2239 INIT_LIST_HEAD(&dev->bus_list);
2240 dev->dev.type = &pci_dev_type;
2241 dev->bus = pci_bus_get(bus);
2242
2243 return dev;
2244}
2245EXPORT_SYMBOL(pci_alloc_dev);
2246
2247static bool pci_bus_crs_vendor_id(u32 l)
2248{
2249 return (l & 0xffff) == 0x0001;
2250}
2251
2252static bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l,
2253 int timeout)
2254{
2255 int delay = 1;
2256
2257 if (!pci_bus_crs_vendor_id(*l))
2258 return true; /* not a CRS completion */
2259
2260 if (!timeout)
2261 return false; /* CRS, but caller doesn't want to wait */
2262
2263 /*
2264 * We got the reserved Vendor ID that indicates a completion with
2265 * Configuration Request Retry Status (CRS). Retry until we get a
2266 * valid Vendor ID or we time out.
2267 */
2268 while (pci_bus_crs_vendor_id(*l)) {
2269 if (delay > timeout) {
2270 pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n",
2271 pci_domain_nr(bus), bus->number,
2272 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2273
2274 return false;
2275 }
2276 if (delay >= 1000)
2277 pr_info("pci %04x:%02x:%02x.%d: not ready after %dms; waiting\n",
2278 pci_domain_nr(bus), bus->number,
2279 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2280
2281 msleep(delay);
2282 delay *= 2;
2283
2284 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2285 return false;
2286 }
2287
2288 if (delay >= 1000)
2289 pr_info("pci %04x:%02x:%02x.%d: ready after %dms\n",
2290 pci_domain_nr(bus), bus->number,
2291 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2292
2293 return true;
2294}
2295
2296bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2297 int timeout)
2298{
2299 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2300 return false;
2301
2302 /* Some broken boards return 0 or ~0 if a slot is empty: */
2303 if (*l == 0xffffffff || *l == 0x00000000 ||
2304 *l == 0x0000ffff || *l == 0xffff0000)
2305 return false;
2306
2307 if (pci_bus_crs_vendor_id(*l))
2308 return pci_bus_wait_crs(bus, devfn, l, timeout);
2309
2310 return true;
2311}
2312
2313bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2314 int timeout)
2315{
2316#ifdef CONFIG_PCI_QUIRKS
2317 struct pci_dev *bridge = bus->self;
2318
2319 /*
2320 * Certain IDT switches have an issue where they improperly trigger
2321 * ACS Source Validation errors on completions for config reads.
2322 */
2323 if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT &&
2324 bridge->device == 0x80b5)
2325 return pci_idt_bus_quirk(bus, devfn, l, timeout);
2326#endif
2327
2328 return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
2329}
2330EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
2331
2332/*
2333 * Read the config data for a PCI device, sanity-check it,
2334 * and fill in the dev structure.
2335 */
2336static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
2337{
2338 struct pci_dev *dev;
2339 u32 l;
2340
2341 if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
2342 return NULL;
2343
2344 dev = pci_alloc_dev(bus);
2345 if (!dev)
2346 return NULL;
2347
2348 dev->devfn = devfn;
2349 dev->vendor = l & 0xffff;
2350 dev->device = (l >> 16) & 0xffff;
2351
2352 pci_set_of_node(dev);
2353
2354 if (pci_setup_device(dev)) {
2355 pci_bus_put(dev->bus);
2356 kfree(dev);
2357 return NULL;
2358 }
2359
2360 return dev;
2361}
2362
2363void pcie_report_downtraining(struct pci_dev *dev)
2364{
2365 if (!pci_is_pcie(dev))
2366 return;
2367
2368 /* Look from the device up to avoid downstream ports with no devices */
2369 if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) &&
2370 (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) &&
2371 (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM))
2372 return;
2373
2374 /* Multi-function PCIe devices share the same link/status */
2375 if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn)
2376 return;
2377
2378 /* Print link status only if the device is constrained by the fabric */
2379 __pcie_print_link_status(dev, false);
2380}
2381
2382static void pci_init_capabilities(struct pci_dev *dev)
2383{
2384 pci_ea_init(dev); /* Enhanced Allocation */
2385
2386 /* Setup MSI caps & disable MSI/MSI-X interrupts */
2387 pci_msi_setup_pci_dev(dev);
2388
2389 /* Buffers for saving PCIe and PCI-X capabilities */
2390 pci_allocate_cap_save_buffers(dev);
2391
2392 pci_pm_init(dev); /* Power Management */
2393 pci_vpd_init(dev); /* Vital Product Data */
2394 pci_configure_ari(dev); /* Alternative Routing-ID Forwarding */
2395 pci_iov_init(dev); /* Single Root I/O Virtualization */
2396 pci_ats_init(dev); /* Address Translation Services */
2397 pci_pri_init(dev); /* Page Request Interface */
2398 pci_pasid_init(dev); /* Process Address Space ID */
2399 pci_acs_init(dev); /* Access Control Services */
2400 pci_ptm_init(dev); /* Precision Time Measurement */
2401 pci_aer_init(dev); /* Advanced Error Reporting */
2402 pci_dpc_init(dev); /* Downstream Port Containment */
2403
2404 pcie_report_downtraining(dev);
2405
2406 if (pci_probe_reset_function(dev) == 0)
2407 dev->reset_fn = 1;
2408}
2409
2410/*
2411 * This is the equivalent of pci_host_bridge_msi_domain() that acts on
2412 * devices. Firmware interfaces that can select the MSI domain on a
2413 * per-device basis should be called from here.
2414 */
2415static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev)
2416{
2417 struct irq_domain *d;
2418
2419 /*
2420 * If a domain has been set through the pcibios_add_device()
2421 * callback, then this is the one (platform code knows best).
2422 */
2423 d = dev_get_msi_domain(&dev->dev);
2424 if (d)
2425 return d;
2426
2427 /*
2428 * Let's see if we have a firmware interface able to provide
2429 * the domain.
2430 */
2431 d = pci_msi_get_device_domain(dev);
2432 if (d)
2433 return d;
2434
2435 return NULL;
2436}
2437
2438static void pci_set_msi_domain(struct pci_dev *dev)
2439{
2440 struct irq_domain *d;
2441
2442 /*
2443 * If the platform or firmware interfaces cannot supply a
2444 * device-specific MSI domain, then inherit the default domain
2445 * from the host bridge itself.
2446 */
2447 d = pci_dev_msi_domain(dev);
2448 if (!d)
2449 d = dev_get_msi_domain(&dev->bus->dev);
2450
2451 dev_set_msi_domain(&dev->dev, d);
2452}
2453
2454void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
2455{
2456 int ret;
2457
2458 pci_configure_device(dev);
2459
2460 device_initialize(&dev->dev);
2461 dev->dev.release = pci_release_dev;
2462
2463 set_dev_node(&dev->dev, pcibus_to_node(bus));
2464 dev->dev.dma_mask = &dev->dma_mask;
2465 dev->dev.dma_parms = &dev->dma_parms;
2466 dev->dev.coherent_dma_mask = 0xffffffffull;
2467
2468 dma_set_max_seg_size(&dev->dev, 65536);
2469 dma_set_seg_boundary(&dev->dev, 0xffffffff);
2470
2471 /* Fix up broken headers */
2472 pci_fixup_device(pci_fixup_header, dev);
2473
2474 pci_reassigndev_resource_alignment(dev);
2475
2476 dev->state_saved = false;
2477
2478 pci_init_capabilities(dev);
2479
2480 /*
2481 * Add the device to our list of discovered devices
2482 * and the bus list for fixup functions, etc.
2483 */
2484 down_write(&pci_bus_sem);
2485 list_add_tail(&dev->bus_list, &bus->devices);
2486 up_write(&pci_bus_sem);
2487
2488 ret = pcibios_add_device(dev);
2489 WARN_ON(ret < 0);
2490
2491 /* Set up MSI IRQ domain */
2492 pci_set_msi_domain(dev);
2493
2494 /* Notifier could use PCI capabilities */
2495 dev->match_driver = false;
2496 ret = device_add(&dev->dev);
2497 WARN_ON(ret < 0);
2498}
2499
2500struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
2501{
2502 struct pci_dev *dev;
2503
2504 dev = pci_get_slot(bus, devfn);
2505 if (dev) {
2506 pci_dev_put(dev);
2507 return dev;
2508 }
2509
2510 dev = pci_scan_device(bus, devfn);
2511 if (!dev)
2512 return NULL;
2513
2514 pci_device_add(dev, bus);
2515
2516 return dev;
2517}
2518EXPORT_SYMBOL(pci_scan_single_device);
2519
2520static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn)
2521{
2522 int pos;
2523 u16 cap = 0;
2524 unsigned next_fn;
2525
2526 if (pci_ari_enabled(bus)) {
2527 if (!dev)
2528 return 0;
2529 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
2530 if (!pos)
2531 return 0;
2532
2533 pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap);
2534 next_fn = PCI_ARI_CAP_NFN(cap);
2535 if (next_fn <= fn)
2536 return 0; /* protect against malformed list */
2537
2538 return next_fn;
2539 }
2540
2541 /* dev may be NULL for non-contiguous multifunction devices */
2542 if (!dev || dev->multifunction)
2543 return (fn + 1) % 8;
2544
2545 return 0;
2546}
2547
2548static int only_one_child(struct pci_bus *bus)
2549{
2550 struct pci_dev *bridge = bus->self;
2551
2552 /*
2553 * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so
2554 * we scan for all possible devices, not just Device 0.
2555 */
2556 if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
2557 return 0;
2558
2559 /*
2560 * A PCIe Downstream Port normally leads to a Link with only Device
2561 * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan
2562 * only for Device 0 in that situation.
2563 */
2564 if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge))
2565 return 1;
2566
2567 return 0;
2568}
2569
2570/**
2571 * pci_scan_slot - Scan a PCI slot on a bus for devices
2572 * @bus: PCI bus to scan
2573 * @devfn: slot number to scan (must have zero function)
2574 *
2575 * Scan a PCI slot on the specified PCI bus for devices, adding
2576 * discovered devices to the @bus->devices list. New devices
2577 * will not have is_added set.
2578 *
2579 * Returns the number of new devices found.
2580 */
2581int pci_scan_slot(struct pci_bus *bus, int devfn)
2582{
2583 unsigned fn, nr = 0;
2584 struct pci_dev *dev;
2585
2586 if (only_one_child(bus) && (devfn > 0))
2587 return 0; /* Already scanned the entire slot */
2588
2589 dev = pci_scan_single_device(bus, devfn);
2590 if (!dev)
2591 return 0;
2592 if (!pci_dev_is_added(dev))
2593 nr++;
2594
2595 for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) {
2596 dev = pci_scan_single_device(bus, devfn + fn);
2597 if (dev) {
2598 if (!pci_dev_is_added(dev))
2599 nr++;
2600 dev->multifunction = 1;
2601 }
2602 }
2603
2604 /* Only one slot has PCIe device */
2605 if (bus->self && nr)
2606 pcie_aspm_init_link_state(bus->self);
2607
2608 return nr;
2609}
2610EXPORT_SYMBOL(pci_scan_slot);
2611
2612static int pcie_find_smpss(struct pci_dev *dev, void *data)
2613{
2614 u8 *smpss = data;
2615
2616 if (!pci_is_pcie(dev))
2617 return 0;
2618
2619 /*
2620 * We don't have a way to change MPS settings on devices that have
2621 * drivers attached. A hot-added device might support only the minimum
2622 * MPS setting (MPS=128). Therefore, if the fabric contains a bridge
2623 * where devices may be hot-added, we limit the fabric MPS to 128 so
2624 * hot-added devices will work correctly.
2625 *
2626 * However, if we hot-add a device to a slot directly below a Root
2627 * Port, it's impossible for there to be other existing devices below
2628 * the port. We don't limit the MPS in this case because we can
2629 * reconfigure MPS on both the Root Port and the hot-added device,
2630 * and there are no other devices involved.
2631 *
2632 * Note that this PCIE_BUS_SAFE path assumes no peer-to-peer DMA.
2633 */
2634 if (dev->is_hotplug_bridge &&
2635 pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
2636 *smpss = 0;
2637
2638 if (*smpss > dev->pcie_mpss)
2639 *smpss = dev->pcie_mpss;
2640
2641 return 0;
2642}
2643
2644static void pcie_write_mps(struct pci_dev *dev, int mps)
2645{
2646 int rc;
2647
2648 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
2649 mps = 128 << dev->pcie_mpss;
2650
2651 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT &&
2652 dev->bus->self)
2653
2654 /*
2655 * For "Performance", the assumption is made that
2656 * downstream communication will never be larger than
2657 * the MRRS. So, the MPS only needs to be configured
2658 * for the upstream communication. This being the case,
2659 * walk from the top down and set the MPS of the child
2660 * to that of the parent bus.
2661 *
2662 * Configure the device MPS with the smaller of the
2663 * device MPSS or the bridge MPS (which is assumed to be
2664 * properly configured at this point to the largest
2665 * allowable MPS based on its parent bus).
2666 */
2667 mps = min(mps, pcie_get_mps(dev->bus->self));
2668 }
2669
2670 rc = pcie_set_mps(dev, mps);
2671 if (rc)
2672 pci_err(dev, "Failed attempting to set the MPS\n");
2673}
2674
2675static void pcie_write_mrrs(struct pci_dev *dev)
2676{
2677 int rc, mrrs;
2678
2679 /*
2680 * In the "safe" case, do not configure the MRRS. There appear to be
2681 * issues with setting MRRS to 0 on a number of devices.
2682 */
2683 if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
2684 return;
2685
2686 /*
2687 * For max performance, the MRRS must be set to the largest supported
2688 * value. However, it cannot be configured larger than the MPS the
2689 * device or the bus can support. This should already be properly
2690 * configured by a prior call to pcie_write_mps().
2691 */
2692 mrrs = pcie_get_mps(dev);
2693
2694 /*
2695 * MRRS is a R/W register. Invalid values can be written, but a
2696 * subsequent read will verify if the value is acceptable or not.
2697 * If the MRRS value provided is not acceptable (e.g., too large),
2698 * shrink the value until it is acceptable to the HW.
2699 */
2700 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
2701 rc = pcie_set_readrq(dev, mrrs);
2702 if (!rc)
2703 break;
2704
2705 pci_warn(dev, "Failed attempting to set the MRRS\n");
2706 mrrs /= 2;
2707 }
2708
2709 if (mrrs < 128)
2710 pci_err(dev, "MRRS was unable to be configured with a safe value. If problems are experienced, try running with pci=pcie_bus_safe\n");
2711}
2712
2713static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
2714{
2715 int mps, orig_mps;
2716
2717 if (!pci_is_pcie(dev))
2718 return 0;
2719
2720 if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
2721 pcie_bus_config == PCIE_BUS_DEFAULT)
2722 return 0;
2723
2724 mps = 128 << *(u8 *)data;
2725 orig_mps = pcie_get_mps(dev);
2726
2727 pcie_write_mps(dev, mps);
2728 pcie_write_mrrs(dev);
2729
2730 pci_info(dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n",
2731 pcie_get_mps(dev), 128 << dev->pcie_mpss,
2732 orig_mps, pcie_get_readrq(dev));
2733
2734 return 0;
2735}
2736
2737/*
2738 * pcie_bus_configure_settings() requires that pci_walk_bus work in a top-down,
2739 * parents then children fashion. If this changes, then this code will not
2740 * work as designed.
2741 */
2742void pcie_bus_configure_settings(struct pci_bus *bus)
2743{
2744 u8 smpss = 0;
2745
2746 if (!bus->self)
2747 return;
2748
2749 if (!pci_is_pcie(bus->self))
2750 return;
2751
2752 /*
2753 * FIXME - Peer to peer DMA is possible, though the endpoint would need
2754 * to be aware of the MPS of the destination. To work around this,
2755 * simply force the MPS of the entire system to the smallest possible.
2756 */
2757 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
2758 smpss = 0;
2759
2760 if (pcie_bus_config == PCIE_BUS_SAFE) {
2761 smpss = bus->self->pcie_mpss;
2762
2763 pcie_find_smpss(bus->self, &smpss);
2764 pci_walk_bus(bus, pcie_find_smpss, &smpss);
2765 }
2766
2767 pcie_bus_configure_set(bus->self, &smpss);
2768 pci_walk_bus(bus, pcie_bus_configure_set, &smpss);
2769}
2770EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);
2771
2772/*
2773 * Called after each bus is probed, but before its children are examined. This
2774 * is marked as __weak because multiple architectures define it.
2775 */
2776void __weak pcibios_fixup_bus(struct pci_bus *bus)
2777{
2778 /* nothing to do, expected to be removed in the future */
2779}
2780
2781/**
2782 * pci_scan_child_bus_extend() - Scan devices below a bus
2783 * @bus: Bus to scan for devices
2784 * @available_buses: Total number of buses available (%0 does not try to
2785 * extend beyond the minimal)
2786 *
2787 * Scans devices below @bus including subordinate buses. Returns new
2788 * subordinate number including all the found devices. Passing
2789 * @available_buses causes the remaining bus space to be distributed
2790 * equally between hotplug-capable bridges to allow future extension of the
2791 * hierarchy.
2792 */
2793static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
2794 unsigned int available_buses)
2795{
2796 unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
2797 unsigned int start = bus->busn_res.start;
2798 unsigned int devfn, fn, cmax, max = start;
2799 struct pci_dev *dev;
2800 int nr_devs;
2801
2802 dev_dbg(&bus->dev, "scanning bus\n");
2803
2804 /* Go find them, Rover! */
2805 for (devfn = 0; devfn < 256; devfn += 8) {
2806 nr_devs = pci_scan_slot(bus, devfn);
2807
2808 /*
2809 * The Jailhouse hypervisor may pass individual functions of a
2810 * multi-function device to a guest without passing function 0.
2811 * Look for them as well.
2812 */
2813 if (jailhouse_paravirt() && nr_devs == 0) {
2814 for (fn = 1; fn < 8; fn++) {
2815 dev = pci_scan_single_device(bus, devfn + fn);
2816 if (dev)
2817 dev->multifunction = 1;
2818 }
2819 }
2820 }
2821
2822 /* Reserve buses for SR-IOV capability */
2823 used_buses = pci_iov_bus_range(bus);
2824 max += used_buses;
2825
2826 /*
2827 * After performing arch-dependent fixup of the bus, look behind
2828 * all PCI-to-PCI bridges on this bus.
2829 */
2830 if (!bus->is_added) {
2831 dev_dbg(&bus->dev, "fixups for bus\n");
2832 pcibios_fixup_bus(bus);
2833 bus->is_added = 1;
2834 }
2835
2836 /*
2837 * Calculate how many hotplug bridges and normal bridges there
2838 * are on this bus. We will distribute the additional available
2839 * buses between hotplug bridges.
2840 */
2841 for_each_pci_bridge(dev, bus) {
2842 if (dev->is_hotplug_bridge)
2843 hotplug_bridges++;
2844 else
2845 normal_bridges++;
2846 }
2847
2848 /*
2849 * Scan bridges that are already configured. We don't touch them
2850 * unless they are misconfigured (which will be done in the second
2851 * scan below).
2852 */
2853 for_each_pci_bridge(dev, bus) {
2854 cmax = max;
2855 max = pci_scan_bridge_extend(bus, dev, max, 0, 0);
2856
2857 /*
2858 * Reserve one bus for each bridge now to avoid extending
2859 * hotplug bridges too much during the second scan below.
2860 */
2861 used_buses++;
2862 if (cmax - max > 1)
2863 used_buses += cmax - max - 1;
2864 }
2865
2866 /* Scan bridges that need to be reconfigured */
2867 for_each_pci_bridge(dev, bus) {
2868 unsigned int buses = 0;
2869
2870 if (!hotplug_bridges && normal_bridges == 1) {
2871
2872 /*
2873 * There is only one bridge on the bus (upstream
2874 * port) so it gets all available buses which it
2875 * can then distribute to the possible hotplug
2876 * bridges below.
2877 */
2878 buses = available_buses;
2879 } else if (dev->is_hotplug_bridge) {
2880
2881 /*
2882 * Distribute the extra buses between hotplug
2883 * bridges if any.
2884 */
2885 buses = available_buses / hotplug_bridges;
2886 buses = min(buses, available_buses - used_buses + 1);
2887 }
2888
2889 cmax = max;
2890 max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1);
2891 /* One bus is already accounted so don't add it again */
2892 if (max - cmax > 1)
2893 used_buses += max - cmax - 1;
2894 }
2895
2896 /*
2897 * Make sure a hotplug bridge has at least the minimum requested
2898 * number of buses but allow it to grow up to the maximum available
2899 * bus number of there is room.
2900 */
2901 if (bus->self && bus->self->is_hotplug_bridge) {
2902 used_buses = max_t(unsigned int, available_buses,
2903 pci_hotplug_bus_size - 1);
2904 if (max - start < used_buses) {
2905 max = start + used_buses;
2906
2907 /* Do not allocate more buses than we have room left */
2908 if (max > bus->busn_res.end)
2909 max = bus->busn_res.end;
2910
2911 dev_dbg(&bus->dev, "%pR extended by %#02x\n",
2912 &bus->busn_res, max - start);
2913 }
2914 }
2915
2916 /*
2917 * We've scanned the bus and so we know all about what's on
2918 * the other side of any bridges that may be on this bus plus
2919 * any devices.
2920 *
2921 * Return how far we've got finding sub-buses.
2922 */
2923 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max);
2924 return max;
2925}
2926
2927/**
2928 * pci_scan_child_bus() - Scan devices below a bus
2929 * @bus: Bus to scan for devices
2930 *
2931 * Scans devices below @bus including subordinate buses. Returns new
2932 * subordinate number including all the found devices.
2933 */
2934unsigned int pci_scan_child_bus(struct pci_bus *bus)
2935{
2936 return pci_scan_child_bus_extend(bus, 0);
2937}
2938EXPORT_SYMBOL_GPL(pci_scan_child_bus);
2939
2940/**
2941 * pcibios_root_bridge_prepare - Platform-specific host bridge setup
2942 * @bridge: Host bridge to set up
2943 *
2944 * Default empty implementation. Replace with an architecture-specific setup
2945 * routine, if necessary.
2946 */
2947int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
2948{
2949 return 0;
2950}
2951
2952void __weak pcibios_add_bus(struct pci_bus *bus)
2953{
2954}
2955
2956void __weak pcibios_remove_bus(struct pci_bus *bus)
2957{
2958}
2959
2960struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
2961 struct pci_ops *ops, void *sysdata, struct list_head *resources)
2962{
2963 int error;
2964 struct pci_host_bridge *bridge;
2965
2966 bridge = pci_alloc_host_bridge(0);
2967 if (!bridge)
2968 return NULL;
2969
2970 bridge->dev.parent = parent;
2971
2972 list_splice_init(resources, &bridge->windows);
2973 bridge->sysdata = sysdata;
2974 bridge->busnr = bus;
2975 bridge->ops = ops;
2976
2977 error = pci_register_host_bridge(bridge);
2978 if (error < 0)
2979 goto err_out;
2980
2981 return bridge->bus;
2982
2983err_out:
2984 put_device(&bridge->dev);
2985 return NULL;
2986}
2987EXPORT_SYMBOL_GPL(pci_create_root_bus);
2988
2989int pci_host_probe(struct pci_host_bridge *bridge)
2990{
2991 struct pci_bus *bus, *child;
2992 int ret;
2993
2994 ret = pci_scan_root_bus_bridge(bridge);
2995 if (ret < 0) {
2996 dev_err(bridge->dev.parent, "Scanning root bridge failed");
2997 return ret;
2998 }
2999
3000 bus = bridge->bus;
3001
3002 /*
3003 * We insert PCI resources into the iomem_resource and
3004 * ioport_resource trees in either pci_bus_claim_resources()
3005 * or pci_bus_assign_resources().
3006 */
3007 if (pci_has_flag(PCI_PROBE_ONLY)) {
3008 pci_bus_claim_resources(bus);
3009 } else {
3010 pci_bus_size_bridges(bus);
3011 pci_bus_assign_resources(bus);
3012
3013 list_for_each_entry(child, &bus->children, node)
3014 pcie_bus_configure_settings(child);
3015 }
3016
3017 pci_bus_add_devices(bus);
3018 return 0;
3019}
3020EXPORT_SYMBOL_GPL(pci_host_probe);
3021
3022int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
3023{
3024 struct resource *res = &b->busn_res;
3025 struct resource *parent_res, *conflict;
3026
3027 res->start = bus;
3028 res->end = bus_max;
3029 res->flags = IORESOURCE_BUS;
3030
3031 if (!pci_is_root_bus(b))
3032 parent_res = &b->parent->busn_res;
3033 else {
3034 parent_res = get_pci_domain_busn_res(pci_domain_nr(b));
3035 res->flags |= IORESOURCE_PCI_FIXED;
3036 }
3037
3038 conflict = request_resource_conflict(parent_res, res);
3039
3040 if (conflict)
3041 dev_info(&b->dev,
3042 "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n",
3043 res, pci_is_root_bus(b) ? "domain " : "",
3044 parent_res, conflict->name, conflict);
3045
3046 return conflict == NULL;
3047}
3048
3049int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max)
3050{
3051 struct resource *res = &b->busn_res;
3052 struct resource old_res = *res;
3053 resource_size_t size;
3054 int ret;
3055
3056 if (res->start > bus_max)
3057 return -EINVAL;
3058
3059 size = bus_max - res->start + 1;
3060 ret = adjust_resource(res, res->start, size);
3061 dev_info(&b->dev, "busn_res: %pR end %s updated to %02x\n",
3062 &old_res, ret ? "can not be" : "is", bus_max);
3063
3064 if (!ret && !res->parent)
3065 pci_bus_insert_busn_res(b, res->start, res->end);
3066
3067 return ret;
3068}
3069
3070void pci_bus_release_busn_res(struct pci_bus *b)
3071{
3072 struct resource *res = &b->busn_res;
3073 int ret;
3074
3075 if (!res->flags || !res->parent)
3076 return;
3077
3078 ret = release_resource(res);
3079 dev_info(&b->dev, "busn_res: %pR %s released\n",
3080 res, ret ? "can not be" : "is");
3081}
3082
3083int pci_scan_root_bus_bridge(struct pci_host_bridge *bridge)
3084{
3085 struct resource_entry *window;
3086 bool found = false;
3087 struct pci_bus *b;
3088 int max, bus, ret;
3089
3090 if (!bridge)
3091 return -EINVAL;
3092
3093 resource_list_for_each_entry(window, &bridge->windows)
3094 if (window->res->flags & IORESOURCE_BUS) {
3095 bridge->busnr = window->res->start;
3096 found = true;
3097 break;
3098 }
3099
3100 ret = pci_register_host_bridge(bridge);
3101 if (ret < 0)
3102 return ret;
3103
3104 b = bridge->bus;
3105 bus = bridge->busnr;
3106
3107 if (!found) {
3108 dev_info(&b->dev,
3109 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3110 bus);
3111 pci_bus_insert_busn_res(b, bus, 255);
3112 }
3113
3114 max = pci_scan_child_bus(b);
3115
3116 if (!found)
3117 pci_bus_update_busn_res_end(b, max);
3118
3119 return 0;
3120}
3121EXPORT_SYMBOL(pci_scan_root_bus_bridge);
3122
3123struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
3124 struct pci_ops *ops, void *sysdata, struct list_head *resources)
3125{
3126 struct resource_entry *window;
3127 bool found = false;
3128 struct pci_bus *b;
3129 int max;
3130
3131 resource_list_for_each_entry(window, resources)
3132 if (window->res->flags & IORESOURCE_BUS) {
3133 found = true;
3134 break;
3135 }
3136
3137 b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
3138 if (!b)
3139 return NULL;
3140
3141 if (!found) {
3142 dev_info(&b->dev,
3143 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3144 bus);
3145 pci_bus_insert_busn_res(b, bus, 255);
3146 }
3147
3148 max = pci_scan_child_bus(b);
3149
3150 if (!found)
3151 pci_bus_update_busn_res_end(b, max);
3152
3153 return b;
3154}
3155EXPORT_SYMBOL(pci_scan_root_bus);
3156
3157struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
3158 void *sysdata)
3159{
3160 LIST_HEAD(resources);
3161 struct pci_bus *b;
3162
3163 pci_add_resource(&resources, &ioport_resource);
3164 pci_add_resource(&resources, &iomem_resource);
3165 pci_add_resource(&resources, &busn_resource);
3166 b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
3167 if (b) {
3168 pci_scan_child_bus(b);
3169 } else {
3170 pci_free_resource_list(&resources);
3171 }
3172 return b;
3173}
3174EXPORT_SYMBOL(pci_scan_bus);
3175
3176/**
3177 * pci_rescan_bus_bridge_resize - Scan a PCI bus for devices
3178 * @bridge: PCI bridge for the bus to scan
3179 *
3180 * Scan a PCI bus and child buses for new devices, add them,
3181 * and enable them, resizing bridge mmio/io resource if necessary
3182 * and possible. The caller must ensure the child devices are already
3183 * removed for resizing to occur.
3184 *
3185 * Returns the max number of subordinate bus discovered.
3186 */
3187unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge)
3188{
3189 unsigned int max;
3190 struct pci_bus *bus = bridge->subordinate;
3191
3192 max = pci_scan_child_bus(bus);
3193
3194 pci_assign_unassigned_bridge_resources(bridge);
3195
3196 pci_bus_add_devices(bus);
3197
3198 return max;
3199}
3200
3201/**
3202 * pci_rescan_bus - Scan a PCI bus for devices
3203 * @bus: PCI bus to scan
3204 *
3205 * Scan a PCI bus and child buses for new devices, add them,
3206 * and enable them.
3207 *
3208 * Returns the max number of subordinate bus discovered.
3209 */
3210unsigned int pci_rescan_bus(struct pci_bus *bus)
3211{
3212 unsigned int max;
3213
3214 max = pci_scan_child_bus(bus);
3215 pci_assign_unassigned_bus_resources(bus);
3216 pci_bus_add_devices(bus);
3217
3218 return max;
3219}
3220EXPORT_SYMBOL_GPL(pci_rescan_bus);
3221
3222/*
3223 * pci_rescan_bus(), pci_rescan_bus_bridge_resize() and PCI device removal
3224 * routines should always be executed under this mutex.
3225 */
3226static DEFINE_MUTEX(pci_rescan_remove_lock);
3227
3228void pci_lock_rescan_remove(void)
3229{
3230 mutex_lock(&pci_rescan_remove_lock);
3231}
3232EXPORT_SYMBOL_GPL(pci_lock_rescan_remove);
3233
3234void pci_unlock_rescan_remove(void)
3235{
3236 mutex_unlock(&pci_rescan_remove_lock);
3237}
3238EXPORT_SYMBOL_GPL(pci_unlock_rescan_remove);
3239
3240static int __init pci_sort_bf_cmp(const struct device *d_a,
3241 const struct device *d_b)
3242{
3243 const struct pci_dev *a = to_pci_dev(d_a);
3244 const struct pci_dev *b = to_pci_dev(d_b);
3245
3246 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
3247 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
3248
3249 if (a->bus->number < b->bus->number) return -1;
3250 else if (a->bus->number > b->bus->number) return 1;
3251
3252 if (a->devfn < b->devfn) return -1;
3253 else if (a->devfn > b->devfn) return 1;
3254
3255 return 0;
3256}
3257
3258void __init pci_sort_breadthfirst(void)
3259{
3260 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp);
3261}
3262
3263int pci_hp_add_bridge(struct pci_dev *dev)
3264{
3265 struct pci_bus *parent = dev->bus;
3266 int busnr, start = parent->busn_res.start;
3267 unsigned int available_buses = 0;
3268 int end = parent->busn_res.end;
3269
3270 for (busnr = start; busnr <= end; busnr++) {
3271 if (!pci_find_bus(pci_domain_nr(parent), busnr))
3272 break;
3273 }
3274 if (busnr-- > end) {
3275 pci_err(dev, "No bus number available for hot-added bridge\n");
3276 return -1;
3277 }
3278
3279 /* Scan bridges that are already configured */
3280 busnr = pci_scan_bridge(parent, dev, busnr, 0);
3281
3282 /*
3283 * Distribute the available bus numbers between hotplug-capable
3284 * bridges to make extending the chain later possible.
3285 */
3286 available_buses = end - busnr;
3287
3288 /* Scan bridges that need to be reconfigured */
3289 pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1);
3290
3291 if (!dev->subordinate)
3292 return -1;
3293
3294 return 0;
3295}
3296EXPORT_SYMBOL_GPL(pci_hp_add_bridge);