Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * PCI Virtual Channel support
  4 *
  5 * Copyright (C) 2013 Red Hat, Inc.  All rights reserved.
  6 *     Author: Alex Williamson <alex.williamson@redhat.com>
  7 */
  8
  9#include <linux/device.h>
 10#include <linux/kernel.h>
 11#include <linux/module.h>
 12#include <linux/pci.h>
 13#include <linux/pci_regs.h>
 14#include <linux/types.h>
 15
 16#include "pci.h"
 17
 18/**
 19 * pci_vc_save_restore_dwords - Save or restore a series of dwords
 20 * @dev: device
 21 * @pos: starting config space position
 22 * @buf: buffer to save to or restore from
 23 * @dwords: number of dwords to save/restore
 24 * @save: whether to save or restore
 25 */
 26static void pci_vc_save_restore_dwords(struct pci_dev *dev, int pos,
 27				       u32 *buf, int dwords, bool save)
 28{
 29	int i;
 30
 31	for (i = 0; i < dwords; i++, buf++) {
 32		if (save)
 33			pci_read_config_dword(dev, pos + (i * 4), buf);
 34		else
 35			pci_write_config_dword(dev, pos + (i * 4), *buf);
 36	}
 37}
 38
 39/**
 40 * pci_vc_load_arb_table - load and wait for VC arbitration table
 41 * @dev: device
 42 * @pos: starting position of VC capability (VC/VC9/MFVC)
 43 *
 44 * Set Load VC Arbitration Table bit requesting hardware to apply the VC
 45 * Arbitration Table (previously loaded).  When the VC Arbitration Table
 46 * Status clears, hardware has latched the table into VC arbitration logic.
 47 */
 48static void pci_vc_load_arb_table(struct pci_dev *dev, int pos)
 49{
 50	u16 ctrl;
 51
 52	pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL, &ctrl);
 53	pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
 54			      ctrl | PCI_VC_PORT_CTRL_LOAD_TABLE);
 55	if (pci_wait_for_pending(dev, pos + PCI_VC_PORT_STATUS,
 56				 PCI_VC_PORT_STATUS_TABLE))
 57		return;
 58
 59	pci_err(dev, "VC arbitration table failed to load\n");
 60}
 61
 62/**
 63 * pci_vc_load_port_arb_table - Load and wait for VC port arbitration table
 64 * @dev: device
 65 * @pos: starting position of VC capability (VC/VC9/MFVC)
 66 * @res: VC resource number, ie. VCn (0-7)
 67 *
 68 * Set Load Port Arbitration Table bit requesting hardware to apply the Port
 69 * Arbitration Table (previously loaded).  When the Port Arbitration Table
 70 * Status clears, hardware has latched the table into port arbitration logic.
 71 */
 72static void pci_vc_load_port_arb_table(struct pci_dev *dev, int pos, int res)
 73{
 74	int ctrl_pos, status_pos;
 75	u32 ctrl;
 76
 77	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
 78	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
 79
 80	pci_read_config_dword(dev, ctrl_pos, &ctrl);
 81	pci_write_config_dword(dev, ctrl_pos,
 82			       ctrl | PCI_VC_RES_CTRL_LOAD_TABLE);
 83
 84	if (pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_TABLE))
 85		return;
 86
 87	pci_err(dev, "VC%d port arbitration table failed to load\n", res);
 88}
 89
 90/**
 91 * pci_vc_enable - Enable virtual channel
 92 * @dev: device
 93 * @pos: starting position of VC capability (VC/VC9/MFVC)
 94 * @res: VC res number, ie. VCn (0-7)
 95 *
 96 * A VC is enabled by setting the enable bit in matching resource control
 97 * registers on both sides of a link.  We therefore need to find the opposite
 98 * end of the link.  To keep this simple we enable from the downstream device.
 99 * RC devices do not have an upstream device, nor does it seem that VC9 do
100 * (spec is unclear).  Once we find the upstream device, match the VC ID to
101 * get the correct resource, disable and enable on both ends.
102 */
103static void pci_vc_enable(struct pci_dev *dev, int pos, int res)
104{
105	int ctrl_pos, status_pos, id, pos2, evcc, i, ctrl_pos2, status_pos2;
106	u32 ctrl, header, cap1, ctrl2;
107	struct pci_dev *link = NULL;
108
109	/* Enable VCs from the downstream device */
110	if (!pci_is_pcie(dev) || !pcie_downstream_port(dev))
111		return;
112
113	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
114	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
115
116	pci_read_config_dword(dev, ctrl_pos, &ctrl);
117	id = ctrl & PCI_VC_RES_CTRL_ID;
118
119	pci_read_config_dword(dev, pos, &header);
120
121	/* If there is no opposite end of the link, skip to enable */
122	if (PCI_EXT_CAP_ID(header) == PCI_EXT_CAP_ID_VC9 ||
123	    pci_is_root_bus(dev->bus))
124		goto enable;
125
126	pos2 = pci_find_ext_capability(dev->bus->self, PCI_EXT_CAP_ID_VC);
127	if (!pos2)
128		goto enable;
129
130	pci_read_config_dword(dev->bus->self, pos2 + PCI_VC_PORT_CAP1, &cap1);
131	evcc = cap1 & PCI_VC_CAP1_EVCC;
132
133	/* VC0 is hardwired enabled, so we can start with 1 */
134	for (i = 1; i < evcc + 1; i++) {
135		ctrl_pos2 = pos2 + PCI_VC_RES_CTRL +
136				(i * PCI_CAP_VC_PER_VC_SIZEOF);
137		status_pos2 = pos2 + PCI_VC_RES_STATUS +
138				(i * PCI_CAP_VC_PER_VC_SIZEOF);
139		pci_read_config_dword(dev->bus->self, ctrl_pos2, &ctrl2);
140		if ((ctrl2 & PCI_VC_RES_CTRL_ID) == id) {
141			link = dev->bus->self;
142			break;
143		}
144	}
145
146	if (!link)
147		goto enable;
148
149	/* Disable if enabled */
150	if (ctrl2 & PCI_VC_RES_CTRL_ENABLE) {
151		ctrl2 &= ~PCI_VC_RES_CTRL_ENABLE;
152		pci_write_config_dword(link, ctrl_pos2, ctrl2);
153	}
154
155	/* Enable on both ends */
156	ctrl2 |= PCI_VC_RES_CTRL_ENABLE;
157	pci_write_config_dword(link, ctrl_pos2, ctrl2);
158enable:
159	ctrl |= PCI_VC_RES_CTRL_ENABLE;
160	pci_write_config_dword(dev, ctrl_pos, ctrl);
161
162	if (!pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_NEGO))
163		pci_err(dev, "VC%d negotiation stuck pending\n", id);
164
165	if (link && !pci_wait_for_pending(link, status_pos2,
166					  PCI_VC_RES_STATUS_NEGO))
167		pci_err(link, "VC%d negotiation stuck pending\n", id);
168}
169
170/**
171 * pci_vc_do_save_buffer - Size, save, or restore VC state
172 * @dev: device
173 * @pos: starting position of VC capability (VC/VC9/MFVC)
174 * @save_state: buffer for save/restore
175 * @name: for error message
176 * @save: if provided a buffer, this indicates what to do with it
177 *
178 * Walking Virtual Channel config space to size, save, or restore it
179 * is complicated, so we do it all from one function to reduce code and
180 * guarantee ordering matches in the buffer.  When called with NULL
181 * @save_state, return the size of the necessary save buffer.  When called
182 * with a non-NULL @save_state, @save determines whether we save to the
183 * buffer or restore from it.
184 */
185static int pci_vc_do_save_buffer(struct pci_dev *dev, int pos,
186				 struct pci_cap_saved_state *save_state,
187				 bool save)
188{
189	u32 cap1;
190	char evcc, lpevcc, parb_size;
191	int i, len = 0;
192	u8 *buf = save_state ? (u8 *)save_state->cap.data : NULL;
193
194	/* Sanity check buffer size for save/restore */
195	if (buf && save_state->cap.size !=
196	    pci_vc_do_save_buffer(dev, pos, NULL, save)) {
197		pci_err(dev, "VC save buffer size does not match @0x%x\n", pos);
198		return -ENOMEM;
199	}
200
201	pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP1, &cap1);
202	/* Extended VC Count (not counting VC0) */
203	evcc = cap1 & PCI_VC_CAP1_EVCC;
204	/* Low Priority Extended VC Count (not counting VC0) */
205	lpevcc = (cap1 & PCI_VC_CAP1_LPEVCC) >> 4;
206	/* Port Arbitration Table Entry Size (bits) */
207	parb_size = 1 << ((cap1 & PCI_VC_CAP1_ARB_SIZE) >> 10);
208
209	/*
210	 * Port VC Control Register contains VC Arbitration Select, which
211	 * cannot be modified when more than one LPVC is in operation.  We
212	 * therefore save/restore it first, as only VC0 should be enabled
213	 * after device reset.
214	 */
215	if (buf) {
216		if (save)
217			pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL,
218					     (u16 *)buf);
219		else
220			pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
221					      *(u16 *)buf);
222		buf += 4;
223	}
224	len += 4;
225
226	/*
227	 * If we have any Low Priority VCs and a VC Arbitration Table Offset
228	 * in Port VC Capability Register 2 then save/restore it next.
229	 */
230	if (lpevcc) {
231		u32 cap2;
232		int vcarb_offset;
233
234		pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP2, &cap2);
235		vcarb_offset = ((cap2 & PCI_VC_CAP2_ARB_OFF) >> 24) * 16;
236
237		if (vcarb_offset) {
238			int size, vcarb_phases = 0;
239
240			if (cap2 & PCI_VC_CAP2_128_PHASE)
241				vcarb_phases = 128;
242			else if (cap2 & PCI_VC_CAP2_64_PHASE)
243				vcarb_phases = 64;
244			else if (cap2 & PCI_VC_CAP2_32_PHASE)
245				vcarb_phases = 32;
246
247			/* Fixed 4 bits per phase per lpevcc (plus VC0) */
248			size = ((lpevcc + 1) * vcarb_phases * 4) / 8;
249
250			if (size && buf) {
251				pci_vc_save_restore_dwords(dev,
252							   pos + vcarb_offset,
253							   (u32 *)buf,
254							   size / 4, save);
255				/*
256				 * On restore, we need to signal hardware to
257				 * re-load the VC Arbitration Table.
258				 */
259				if (!save)
260					pci_vc_load_arb_table(dev, pos);
261
262				buf += size;
263			}
264			len += size;
265		}
266	}
267
268	/*
269	 * In addition to each VC Resource Control Register, we may have a
270	 * Port Arbitration Table attached to each VC.  The Port Arbitration
271	 * Table Offset in each VC Resource Capability Register tells us if
272	 * it exists.  The entry size is global from the Port VC Capability
273	 * Register1 above.  The number of phases is determined per VC.
274	 */
275	for (i = 0; i < evcc + 1; i++) {
276		u32 cap;
277		int parb_offset;
278
279		pci_read_config_dword(dev, pos + PCI_VC_RES_CAP +
280				      (i * PCI_CAP_VC_PER_VC_SIZEOF), &cap);
281		parb_offset = ((cap & PCI_VC_RES_CAP_ARB_OFF) >> 24) * 16;
282		if (parb_offset) {
283			int size, parb_phases = 0;
284
285			if (cap & PCI_VC_RES_CAP_256_PHASE)
286				parb_phases = 256;
287			else if (cap & (PCI_VC_RES_CAP_128_PHASE |
288					PCI_VC_RES_CAP_128_PHASE_TB))
289				parb_phases = 128;
290			else if (cap & PCI_VC_RES_CAP_64_PHASE)
291				parb_phases = 64;
292			else if (cap & PCI_VC_RES_CAP_32_PHASE)
293				parb_phases = 32;
294
295			size = (parb_size * parb_phases) / 8;
296
297			if (size && buf) {
298				pci_vc_save_restore_dwords(dev,
299							   pos + parb_offset,
300							   (u32 *)buf,
301							   size / 4, save);
302				buf += size;
303			}
304			len += size;
305		}
306
307		/* VC Resource Control Register */
308		if (buf) {
309			int ctrl_pos = pos + PCI_VC_RES_CTRL +
310						(i * PCI_CAP_VC_PER_VC_SIZEOF);
311			if (save)
312				pci_read_config_dword(dev, ctrl_pos,
313						      (u32 *)buf);
314			else {
315				u32 tmp, ctrl = *(u32 *)buf;
316				/*
317				 * For an FLR case, the VC config may remain.
318				 * Preserve enable bit, restore the rest.
319				 */
320				pci_read_config_dword(dev, ctrl_pos, &tmp);
321				tmp &= PCI_VC_RES_CTRL_ENABLE;
322				tmp |= ctrl & ~PCI_VC_RES_CTRL_ENABLE;
323				pci_write_config_dword(dev, ctrl_pos, tmp);
324				/* Load port arbitration table if used */
325				if (ctrl & PCI_VC_RES_CTRL_ARB_SELECT)
326					pci_vc_load_port_arb_table(dev, pos, i);
327				/* Re-enable if needed */
328				if ((ctrl ^ tmp) & PCI_VC_RES_CTRL_ENABLE)
329					pci_vc_enable(dev, pos, i);
330			}
331			buf += 4;
332		}
333		len += 4;
334	}
335
336	return buf ? 0 : len;
337}
338
339static struct {
340	u16 id;
341	const char *name;
342} vc_caps[] = { { PCI_EXT_CAP_ID_MFVC, "MFVC" },
343		{ PCI_EXT_CAP_ID_VC, "VC" },
344		{ PCI_EXT_CAP_ID_VC9, "VC9" } };
345
346/**
347 * pci_save_vc_state - Save VC state to pre-allocate save buffer
348 * @dev: device
349 *
350 * For each type of VC capability, VC/VC9/MFVC, find the capability and
351 * save it to the pre-allocated save buffer.
352 */
353int pci_save_vc_state(struct pci_dev *dev)
354{
355	int i;
356
357	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
358		int pos, ret;
359		struct pci_cap_saved_state *save_state;
360
361		pos = pci_find_ext_capability(dev, vc_caps[i].id);
362		if (!pos)
363			continue;
364
365		save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
366		if (!save_state) {
367			pci_err(dev, "%s buffer not found in %s\n",
368				vc_caps[i].name, __func__);
369			return -ENOMEM;
370		}
371
372		ret = pci_vc_do_save_buffer(dev, pos, save_state, true);
373		if (ret) {
374			pci_err(dev, "%s save unsuccessful %s\n",
375				vc_caps[i].name, __func__);
376			return ret;
377		}
378	}
379
380	return 0;
381}
382
383/**
384 * pci_restore_vc_state - Restore VC state from save buffer
385 * @dev: device
386 *
387 * For each type of VC capability, VC/VC9/MFVC, find the capability and
388 * restore it from the previously saved buffer.
389 */
390void pci_restore_vc_state(struct pci_dev *dev)
391{
392	int i;
393
394	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
395		int pos;
396		struct pci_cap_saved_state *save_state;
397
398		pos = pci_find_ext_capability(dev, vc_caps[i].id);
399		save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
400		if (!save_state || !pos)
401			continue;
402
403		pci_vc_do_save_buffer(dev, pos, save_state, false);
404	}
405}
406
407/**
408 * pci_allocate_vc_save_buffers - Allocate save buffers for VC caps
409 * @dev: device
410 *
411 * For each type of VC capability, VC/VC9/MFVC, find the capability, size
412 * it, and allocate a buffer for save/restore.
413 */
414void pci_allocate_vc_save_buffers(struct pci_dev *dev)
415{
416	int i;
417
418	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
419		int len, pos = pci_find_ext_capability(dev, vc_caps[i].id);
420
421		if (!pos)
422			continue;
423
424		len = pci_vc_do_save_buffer(dev, pos, NULL, false);
425		if (pci_add_ext_cap_save_buffer(dev, vc_caps[i].id, len))
426			pci_err(dev, "unable to preallocate %s save buffer\n",
427				vc_caps[i].name);
428	}
429}