Loading...
1/*
2 * PCI Bus Services, see include/linux/pci.h for further explanation.
3 *
4 * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
5 * David Mosberger-Tang
6 *
7 * Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
8 */
9
10#include <linux/kernel.h>
11#include <linux/delay.h>
12#include <linux/init.h>
13#include <linux/pci.h>
14#include <linux/pm.h>
15#include <linux/slab.h>
16#include <linux/module.h>
17#include <linux/spinlock.h>
18#include <linux/string.h>
19#include <linux/log2.h>
20#include <linux/pci-aspm.h>
21#include <linux/pm_wakeup.h>
22#include <linux/interrupt.h>
23#include <linux/device.h>
24#include <linux/pm_runtime.h>
25#include <asm/setup.h>
26#include "pci.h"
27
28const char *pci_power_names[] = {
29 "error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
30};
31EXPORT_SYMBOL_GPL(pci_power_names);
32
33int isa_dma_bridge_buggy;
34EXPORT_SYMBOL(isa_dma_bridge_buggy);
35
36int pci_pci_problems;
37EXPORT_SYMBOL(pci_pci_problems);
38
39unsigned int pci_pm_d3_delay;
40
41static void pci_pme_list_scan(struct work_struct *work);
42
43static LIST_HEAD(pci_pme_list);
44static DEFINE_MUTEX(pci_pme_list_mutex);
45static DECLARE_DELAYED_WORK(pci_pme_work, pci_pme_list_scan);
46
47struct pci_pme_device {
48 struct list_head list;
49 struct pci_dev *dev;
50};
51
52#define PME_TIMEOUT 1000 /* How long between PME checks */
53
54static void pci_dev_d3_sleep(struct pci_dev *dev)
55{
56 unsigned int delay = dev->d3_delay;
57
58 if (delay < pci_pm_d3_delay)
59 delay = pci_pm_d3_delay;
60
61 msleep(delay);
62}
63
64#ifdef CONFIG_PCI_DOMAINS
65int pci_domains_supported = 1;
66#endif
67
68#define DEFAULT_CARDBUS_IO_SIZE (256)
69#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
70/* pci=cbmemsize=nnM,cbiosize=nn can override this */
71unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
72unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
73
74#define DEFAULT_HOTPLUG_IO_SIZE (256)
75#define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024)
76/* pci=hpmemsize=nnM,hpiosize=nn can override this */
77unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
78unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
79
80enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
81
82/*
83 * The default CLS is used if arch didn't set CLS explicitly and not
84 * all pci devices agree on the same value. Arch can override either
85 * the dfl or actual value as it sees fit. Don't forget this is
86 * measured in 32-bit words, not bytes.
87 */
88u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2;
89u8 pci_cache_line_size;
90
91/**
92 * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
93 * @bus: pointer to PCI bus structure to search
94 *
95 * Given a PCI bus, returns the highest PCI bus number present in the set
96 * including the given PCI bus and its list of child PCI buses.
97 */
98unsigned char pci_bus_max_busnr(struct pci_bus* bus)
99{
100 struct list_head *tmp;
101 unsigned char max, n;
102
103 max = bus->subordinate;
104 list_for_each(tmp, &bus->children) {
105 n = pci_bus_max_busnr(pci_bus_b(tmp));
106 if(n > max)
107 max = n;
108 }
109 return max;
110}
111EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
112
113#ifdef CONFIG_HAS_IOMEM
114void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
115{
116 /*
117 * Make sure the BAR is actually a memory resource, not an IO resource
118 */
119 if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
120 WARN_ON(1);
121 return NULL;
122 }
123 return ioremap_nocache(pci_resource_start(pdev, bar),
124 pci_resource_len(pdev, bar));
125}
126EXPORT_SYMBOL_GPL(pci_ioremap_bar);
127#endif
128
129#if 0
130/**
131 * pci_max_busnr - returns maximum PCI bus number
132 *
133 * Returns the highest PCI bus number present in the system global list of
134 * PCI buses.
135 */
136unsigned char __devinit
137pci_max_busnr(void)
138{
139 struct pci_bus *bus = NULL;
140 unsigned char max, n;
141
142 max = 0;
143 while ((bus = pci_find_next_bus(bus)) != NULL) {
144 n = pci_bus_max_busnr(bus);
145 if(n > max)
146 max = n;
147 }
148 return max;
149}
150
151#endif /* 0 */
152
153#define PCI_FIND_CAP_TTL 48
154
155static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
156 u8 pos, int cap, int *ttl)
157{
158 u8 id;
159
160 while ((*ttl)--) {
161 pci_bus_read_config_byte(bus, devfn, pos, &pos);
162 if (pos < 0x40)
163 break;
164 pos &= ~3;
165 pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_ID,
166 &id);
167 if (id == 0xff)
168 break;
169 if (id == cap)
170 return pos;
171 pos += PCI_CAP_LIST_NEXT;
172 }
173 return 0;
174}
175
176static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn,
177 u8 pos, int cap)
178{
179 int ttl = PCI_FIND_CAP_TTL;
180
181 return __pci_find_next_cap_ttl(bus, devfn, pos, cap, &ttl);
182}
183
184int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
185{
186 return __pci_find_next_cap(dev->bus, dev->devfn,
187 pos + PCI_CAP_LIST_NEXT, cap);
188}
189EXPORT_SYMBOL_GPL(pci_find_next_capability);
190
191static int __pci_bus_find_cap_start(struct pci_bus *bus,
192 unsigned int devfn, u8 hdr_type)
193{
194 u16 status;
195
196 pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
197 if (!(status & PCI_STATUS_CAP_LIST))
198 return 0;
199
200 switch (hdr_type) {
201 case PCI_HEADER_TYPE_NORMAL:
202 case PCI_HEADER_TYPE_BRIDGE:
203 return PCI_CAPABILITY_LIST;
204 case PCI_HEADER_TYPE_CARDBUS:
205 return PCI_CB_CAPABILITY_LIST;
206 default:
207 return 0;
208 }
209
210 return 0;
211}
212
213/**
214 * pci_find_capability - query for devices' capabilities
215 * @dev: PCI device to query
216 * @cap: capability code
217 *
218 * Tell if a device supports a given PCI capability.
219 * Returns the address of the requested capability structure within the
220 * device's PCI configuration space or 0 in case the device does not
221 * support it. Possible values for @cap:
222 *
223 * %PCI_CAP_ID_PM Power Management
224 * %PCI_CAP_ID_AGP Accelerated Graphics Port
225 * %PCI_CAP_ID_VPD Vital Product Data
226 * %PCI_CAP_ID_SLOTID Slot Identification
227 * %PCI_CAP_ID_MSI Message Signalled Interrupts
228 * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
229 * %PCI_CAP_ID_PCIX PCI-X
230 * %PCI_CAP_ID_EXP PCI Express
231 */
232int pci_find_capability(struct pci_dev *dev, int cap)
233{
234 int pos;
235
236 pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
237 if (pos)
238 pos = __pci_find_next_cap(dev->bus, dev->devfn, pos, cap);
239
240 return pos;
241}
242
243/**
244 * pci_bus_find_capability - query for devices' capabilities
245 * @bus: the PCI bus to query
246 * @devfn: PCI device to query
247 * @cap: capability code
248 *
249 * Like pci_find_capability() but works for pci devices that do not have a
250 * pci_dev structure set up yet.
251 *
252 * Returns the address of the requested capability structure within the
253 * device's PCI configuration space or 0 in case the device does not
254 * support it.
255 */
256int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
257{
258 int pos;
259 u8 hdr_type;
260
261 pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
262
263 pos = __pci_bus_find_cap_start(bus, devfn, hdr_type & 0x7f);
264 if (pos)
265 pos = __pci_find_next_cap(bus, devfn, pos, cap);
266
267 return pos;
268}
269
270/**
271 * pci_find_ext_capability - Find an extended capability
272 * @dev: PCI device to query
273 * @cap: capability code
274 *
275 * Returns the address of the requested extended capability structure
276 * within the device's PCI configuration space or 0 if the device does
277 * not support it. Possible values for @cap:
278 *
279 * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
280 * %PCI_EXT_CAP_ID_VC Virtual Channel
281 * %PCI_EXT_CAP_ID_DSN Device Serial Number
282 * %PCI_EXT_CAP_ID_PWR Power Budgeting
283 */
284int pci_find_ext_capability(struct pci_dev *dev, int cap)
285{
286 u32 header;
287 int ttl;
288 int pos = PCI_CFG_SPACE_SIZE;
289
290 /* minimum 8 bytes per capability */
291 ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
292
293 if (dev->cfg_size <= PCI_CFG_SPACE_SIZE)
294 return 0;
295
296 if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
297 return 0;
298
299 /*
300 * If we have no capabilities, this is indicated by cap ID,
301 * cap version and next pointer all being 0.
302 */
303 if (header == 0)
304 return 0;
305
306 while (ttl-- > 0) {
307 if (PCI_EXT_CAP_ID(header) == cap)
308 return pos;
309
310 pos = PCI_EXT_CAP_NEXT(header);
311 if (pos < PCI_CFG_SPACE_SIZE)
312 break;
313
314 if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
315 break;
316 }
317
318 return 0;
319}
320EXPORT_SYMBOL_GPL(pci_find_ext_capability);
321
322/**
323 * pci_bus_find_ext_capability - find an extended capability
324 * @bus: the PCI bus to query
325 * @devfn: PCI device to query
326 * @cap: capability code
327 *
328 * Like pci_find_ext_capability() but works for pci devices that do not have a
329 * pci_dev structure set up yet.
330 *
331 * Returns the address of the requested capability structure within the
332 * device's PCI configuration space or 0 in case the device does not
333 * support it.
334 */
335int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
336 int cap)
337{
338 u32 header;
339 int ttl;
340 int pos = PCI_CFG_SPACE_SIZE;
341
342 /* minimum 8 bytes per capability */
343 ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
344
345 if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
346 return 0;
347 if (header == 0xffffffff || header == 0)
348 return 0;
349
350 while (ttl-- > 0) {
351 if (PCI_EXT_CAP_ID(header) == cap)
352 return pos;
353
354 pos = PCI_EXT_CAP_NEXT(header);
355 if (pos < PCI_CFG_SPACE_SIZE)
356 break;
357
358 if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
359 break;
360 }
361
362 return 0;
363}
364
365static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
366{
367 int rc, ttl = PCI_FIND_CAP_TTL;
368 u8 cap, mask;
369
370 if (ht_cap == HT_CAPTYPE_SLAVE || ht_cap == HT_CAPTYPE_HOST)
371 mask = HT_3BIT_CAP_MASK;
372 else
373 mask = HT_5BIT_CAP_MASK;
374
375 pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
376 PCI_CAP_ID_HT, &ttl);
377 while (pos) {
378 rc = pci_read_config_byte(dev, pos + 3, &cap);
379 if (rc != PCIBIOS_SUCCESSFUL)
380 return 0;
381
382 if ((cap & mask) == ht_cap)
383 return pos;
384
385 pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn,
386 pos + PCI_CAP_LIST_NEXT,
387 PCI_CAP_ID_HT, &ttl);
388 }
389
390 return 0;
391}
392/**
393 * pci_find_next_ht_capability - query a device's Hypertransport capabilities
394 * @dev: PCI device to query
395 * @pos: Position from which to continue searching
396 * @ht_cap: Hypertransport capability code
397 *
398 * To be used in conjunction with pci_find_ht_capability() to search for
399 * all capabilities matching @ht_cap. @pos should always be a value returned
400 * from pci_find_ht_capability().
401 *
402 * NB. To be 100% safe against broken PCI devices, the caller should take
403 * steps to avoid an infinite loop.
404 */
405int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap)
406{
407 return __pci_find_next_ht_cap(dev, pos + PCI_CAP_LIST_NEXT, ht_cap);
408}
409EXPORT_SYMBOL_GPL(pci_find_next_ht_capability);
410
411/**
412 * pci_find_ht_capability - query a device's Hypertransport capabilities
413 * @dev: PCI device to query
414 * @ht_cap: Hypertransport capability code
415 *
416 * Tell if a device supports a given Hypertransport capability.
417 * Returns an address within the device's PCI configuration space
418 * or 0 in case the device does not support the request capability.
419 * The address points to the PCI capability, of type PCI_CAP_ID_HT,
420 * which has a Hypertransport capability matching @ht_cap.
421 */
422int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
423{
424 int pos;
425
426 pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
427 if (pos)
428 pos = __pci_find_next_ht_cap(dev, pos, ht_cap);
429
430 return pos;
431}
432EXPORT_SYMBOL_GPL(pci_find_ht_capability);
433
434/**
435 * pci_find_parent_resource - return resource region of parent bus of given region
436 * @dev: PCI device structure contains resources to be searched
437 * @res: child resource record for which parent is sought
438 *
439 * For given resource region of given device, return the resource
440 * region of parent bus the given region is contained in or where
441 * it should be allocated from.
442 */
443struct resource *
444pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
445{
446 const struct pci_bus *bus = dev->bus;
447 int i;
448 struct resource *best = NULL, *r;
449
450 pci_bus_for_each_resource(bus, r, i) {
451 if (!r)
452 continue;
453 if (res->start && !(res->start >= r->start && res->end <= r->end))
454 continue; /* Not contained */
455 if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
456 continue; /* Wrong type */
457 if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH))
458 return r; /* Exact match */
459 /* We can't insert a non-prefetch resource inside a prefetchable parent .. */
460 if (r->flags & IORESOURCE_PREFETCH)
461 continue;
462 /* .. but we can put a prefetchable resource inside a non-prefetchable one */
463 if (!best)
464 best = r;
465 }
466 return best;
467}
468
469/**
470 * pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
471 * @dev: PCI device to have its BARs restored
472 *
473 * Restore the BAR values for a given device, so as to make it
474 * accessible by its driver.
475 */
476static void
477pci_restore_bars(struct pci_dev *dev)
478{
479 int i;
480
481 for (i = 0; i < PCI_BRIDGE_RESOURCES; i++)
482 pci_update_resource(dev, i);
483}
484
485static struct pci_platform_pm_ops *pci_platform_pm;
486
487int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
488{
489 if (!ops->is_manageable || !ops->set_state || !ops->choose_state
490 || !ops->sleep_wake || !ops->can_wakeup)
491 return -EINVAL;
492 pci_platform_pm = ops;
493 return 0;
494}
495
496static inline bool platform_pci_power_manageable(struct pci_dev *dev)
497{
498 return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
499}
500
501static inline int platform_pci_set_power_state(struct pci_dev *dev,
502 pci_power_t t)
503{
504 return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
505}
506
507static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
508{
509 return pci_platform_pm ?
510 pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
511}
512
513static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
514{
515 return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
516}
517
518static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
519{
520 return pci_platform_pm ?
521 pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
522}
523
524static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
525{
526 return pci_platform_pm ?
527 pci_platform_pm->run_wake(dev, enable) : -ENODEV;
528}
529
530/**
531 * pci_raw_set_power_state - Use PCI PM registers to set the power state of
532 * given PCI device
533 * @dev: PCI device to handle.
534 * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
535 *
536 * RETURN VALUE:
537 * -EINVAL if the requested state is invalid.
538 * -EIO if device does not support PCI PM or its PM capabilities register has a
539 * wrong version, or device doesn't support the requested state.
540 * 0 if device already is in the requested state.
541 * 0 if device's power state has been successfully changed.
542 */
543static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
544{
545 u16 pmcsr;
546 bool need_restore = false;
547
548 /* Check if we're already there */
549 if (dev->current_state == state)
550 return 0;
551
552 if (!dev->pm_cap)
553 return -EIO;
554
555 if (state < PCI_D0 || state > PCI_D3hot)
556 return -EINVAL;
557
558 /* Validate current state:
559 * Can enter D0 from any state, but if we can only go deeper
560 * to sleep if we're already in a low power state
561 */
562 if (state != PCI_D0 && dev->current_state <= PCI_D3cold
563 && dev->current_state > state) {
564 dev_err(&dev->dev, "invalid power transition "
565 "(from state %d to %d)\n", dev->current_state, state);
566 return -EINVAL;
567 }
568
569 /* check if this device supports the desired state */
570 if ((state == PCI_D1 && !dev->d1_support)
571 || (state == PCI_D2 && !dev->d2_support))
572 return -EIO;
573
574 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
575
576 /* If we're (effectively) in D3, force entire word to 0.
577 * This doesn't affect PME_Status, disables PME_En, and
578 * sets PowerState to 0.
579 */
580 switch (dev->current_state) {
581 case PCI_D0:
582 case PCI_D1:
583 case PCI_D2:
584 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
585 pmcsr |= state;
586 break;
587 case PCI_D3hot:
588 case PCI_D3cold:
589 case PCI_UNKNOWN: /* Boot-up */
590 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
591 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
592 need_restore = true;
593 /* Fall-through: force to D0 */
594 default:
595 pmcsr = 0;
596 break;
597 }
598
599 /* enter specified state */
600 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
601
602 /* Mandatory power management transition delays */
603 /* see PCI PM 1.1 5.6.1 table 18 */
604 if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
605 pci_dev_d3_sleep(dev);
606 else if (state == PCI_D2 || dev->current_state == PCI_D2)
607 udelay(PCI_PM_D2_DELAY);
608
609 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
610 dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
611 if (dev->current_state != state && printk_ratelimit())
612 dev_info(&dev->dev, "Refused to change power state, "
613 "currently in D%d\n", dev->current_state);
614
615 /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
616 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
617 * from D3hot to D0 _may_ perform an internal reset, thereby
618 * going to "D0 Uninitialized" rather than "D0 Initialized".
619 * For example, at least some versions of the 3c905B and the
620 * 3c556B exhibit this behaviour.
621 *
622 * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
623 * devices in a D3hot state at boot. Consequently, we need to
624 * restore at least the BARs so that the device will be
625 * accessible to its driver.
626 */
627 if (need_restore)
628 pci_restore_bars(dev);
629
630 if (dev->bus->self)
631 pcie_aspm_pm_state_change(dev->bus->self);
632
633 return 0;
634}
635
636/**
637 * pci_update_current_state - Read PCI power state of given device from its
638 * PCI PM registers and cache it
639 * @dev: PCI device to handle.
640 * @state: State to cache in case the device doesn't have the PM capability
641 */
642void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
643{
644 if (dev->pm_cap) {
645 u16 pmcsr;
646
647 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
648 dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
649 } else {
650 dev->current_state = state;
651 }
652}
653
654/**
655 * pci_platform_power_transition - Use platform to change device power state
656 * @dev: PCI device to handle.
657 * @state: State to put the device into.
658 */
659static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
660{
661 int error;
662
663 if (platform_pci_power_manageable(dev)) {
664 error = platform_pci_set_power_state(dev, state);
665 if (!error)
666 pci_update_current_state(dev, state);
667 } else {
668 error = -ENODEV;
669 /* Fall back to PCI_D0 if native PM is not supported */
670 if (!dev->pm_cap)
671 dev->current_state = PCI_D0;
672 }
673
674 return error;
675}
676
677/**
678 * __pci_start_power_transition - Start power transition of a PCI device
679 * @dev: PCI device to handle.
680 * @state: State to put the device into.
681 */
682static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
683{
684 if (state == PCI_D0)
685 pci_platform_power_transition(dev, PCI_D0);
686}
687
688/**
689 * __pci_complete_power_transition - Complete power transition of a PCI device
690 * @dev: PCI device to handle.
691 * @state: State to put the device into.
692 *
693 * This function should not be called directly by device drivers.
694 */
695int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
696{
697 return state >= PCI_D0 ?
698 pci_platform_power_transition(dev, state) : -EINVAL;
699}
700EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
701
702/**
703 * pci_set_power_state - Set the power state of a PCI device
704 * @dev: PCI device to handle.
705 * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
706 *
707 * Transition a device to a new power state, using the platform firmware and/or
708 * the device's PCI PM registers.
709 *
710 * RETURN VALUE:
711 * -EINVAL if the requested state is invalid.
712 * -EIO if device does not support PCI PM or its PM capabilities register has a
713 * wrong version, or device doesn't support the requested state.
714 * 0 if device already is in the requested state.
715 * 0 if device's power state has been successfully changed.
716 */
717int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
718{
719 int error;
720
721 /* bound the state we're entering */
722 if (state > PCI_D3hot)
723 state = PCI_D3hot;
724 else if (state < PCI_D0)
725 state = PCI_D0;
726 else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
727 /*
728 * If the device or the parent bridge do not support PCI PM,
729 * ignore the request if we're doing anything other than putting
730 * it into D0 (which would only happen on boot).
731 */
732 return 0;
733
734 __pci_start_power_transition(dev, state);
735
736 /* This device is quirked not to be put into D3, so
737 don't put it in D3 */
738 if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
739 return 0;
740
741 error = pci_raw_set_power_state(dev, state);
742
743 if (!__pci_complete_power_transition(dev, state))
744 error = 0;
745 /*
746 * When aspm_policy is "powersave" this call ensures
747 * that ASPM is configured.
748 */
749 if (!error && dev->bus->self)
750 pcie_aspm_powersave_config_link(dev->bus->self);
751
752 return error;
753}
754
755/**
756 * pci_choose_state - Choose the power state of a PCI device
757 * @dev: PCI device to be suspended
758 * @state: target sleep state for the whole system. This is the value
759 * that is passed to suspend() function.
760 *
761 * Returns PCI power state suitable for given device and given system
762 * message.
763 */
764
765pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
766{
767 pci_power_t ret;
768
769 if (!pci_find_capability(dev, PCI_CAP_ID_PM))
770 return PCI_D0;
771
772 ret = platform_pci_choose_state(dev);
773 if (ret != PCI_POWER_ERROR)
774 return ret;
775
776 switch (state.event) {
777 case PM_EVENT_ON:
778 return PCI_D0;
779 case PM_EVENT_FREEZE:
780 case PM_EVENT_PRETHAW:
781 /* REVISIT both freeze and pre-thaw "should" use D0 */
782 case PM_EVENT_SUSPEND:
783 case PM_EVENT_HIBERNATE:
784 return PCI_D3hot;
785 default:
786 dev_info(&dev->dev, "unrecognized suspend event %d\n",
787 state.event);
788 BUG();
789 }
790 return PCI_D0;
791}
792
793EXPORT_SYMBOL(pci_choose_state);
794
795#define PCI_EXP_SAVE_REGS 7
796
797#define pcie_cap_has_devctl(type, flags) 1
798#define pcie_cap_has_lnkctl(type, flags) \
799 ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
800 (type == PCI_EXP_TYPE_ROOT_PORT || \
801 type == PCI_EXP_TYPE_ENDPOINT || \
802 type == PCI_EXP_TYPE_LEG_END))
803#define pcie_cap_has_sltctl(type, flags) \
804 ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
805 ((type == PCI_EXP_TYPE_ROOT_PORT) || \
806 (type == PCI_EXP_TYPE_DOWNSTREAM && \
807 (flags & PCI_EXP_FLAGS_SLOT))))
808#define pcie_cap_has_rtctl(type, flags) \
809 ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
810 (type == PCI_EXP_TYPE_ROOT_PORT || \
811 type == PCI_EXP_TYPE_RC_EC))
812#define pcie_cap_has_devctl2(type, flags) \
813 ((flags & PCI_EXP_FLAGS_VERS) > 1)
814#define pcie_cap_has_lnkctl2(type, flags) \
815 ((flags & PCI_EXP_FLAGS_VERS) > 1)
816#define pcie_cap_has_sltctl2(type, flags) \
817 ((flags & PCI_EXP_FLAGS_VERS) > 1)
818
819static int pci_save_pcie_state(struct pci_dev *dev)
820{
821 int pos, i = 0;
822 struct pci_cap_saved_state *save_state;
823 u16 *cap;
824 u16 flags;
825
826 pos = pci_pcie_cap(dev);
827 if (!pos)
828 return 0;
829
830 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
831 if (!save_state) {
832 dev_err(&dev->dev, "buffer not found in %s\n", __func__);
833 return -ENOMEM;
834 }
835 cap = (u16 *)&save_state->cap.data[0];
836
837 pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
838
839 if (pcie_cap_has_devctl(dev->pcie_type, flags))
840 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
841 if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
842 pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
843 if (pcie_cap_has_sltctl(dev->pcie_type, flags))
844 pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
845 if (pcie_cap_has_rtctl(dev->pcie_type, flags))
846 pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
847 if (pcie_cap_has_devctl2(dev->pcie_type, flags))
848 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
849 if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
850 pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
851 if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
852 pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
853
854 return 0;
855}
856
857static void pci_restore_pcie_state(struct pci_dev *dev)
858{
859 int i = 0, pos;
860 struct pci_cap_saved_state *save_state;
861 u16 *cap;
862 u16 flags;
863
864 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
865 pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
866 if (!save_state || pos <= 0)
867 return;
868 cap = (u16 *)&save_state->cap.data[0];
869
870 pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
871
872 if (pcie_cap_has_devctl(dev->pcie_type, flags))
873 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
874 if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
875 pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
876 if (pcie_cap_has_sltctl(dev->pcie_type, flags))
877 pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
878 if (pcie_cap_has_rtctl(dev->pcie_type, flags))
879 pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
880 if (pcie_cap_has_devctl2(dev->pcie_type, flags))
881 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
882 if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
883 pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
884 if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
885 pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
886}
887
888
889static int pci_save_pcix_state(struct pci_dev *dev)
890{
891 int pos;
892 struct pci_cap_saved_state *save_state;
893
894 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
895 if (pos <= 0)
896 return 0;
897
898 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
899 if (!save_state) {
900 dev_err(&dev->dev, "buffer not found in %s\n", __func__);
901 return -ENOMEM;
902 }
903
904 pci_read_config_word(dev, pos + PCI_X_CMD,
905 (u16 *)save_state->cap.data);
906
907 return 0;
908}
909
910static void pci_restore_pcix_state(struct pci_dev *dev)
911{
912 int i = 0, pos;
913 struct pci_cap_saved_state *save_state;
914 u16 *cap;
915
916 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
917 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
918 if (!save_state || pos <= 0)
919 return;
920 cap = (u16 *)&save_state->cap.data[0];
921
922 pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
923}
924
925
926/**
927 * pci_save_state - save the PCI configuration space of a device before suspending
928 * @dev: - PCI device that we're dealing with
929 */
930int
931pci_save_state(struct pci_dev *dev)
932{
933 int i;
934 /* XXX: 100% dword access ok here? */
935 for (i = 0; i < 16; i++)
936 pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]);
937 dev->state_saved = true;
938 if ((i = pci_save_pcie_state(dev)) != 0)
939 return i;
940 if ((i = pci_save_pcix_state(dev)) != 0)
941 return i;
942 return 0;
943}
944
945/**
946 * pci_restore_state - Restore the saved state of a PCI device
947 * @dev: - PCI device that we're dealing with
948 */
949void pci_restore_state(struct pci_dev *dev)
950{
951 int i;
952 u32 val;
953
954 if (!dev->state_saved)
955 return;
956
957 /* PCI Express register must be restored first */
958 pci_restore_pcie_state(dev);
959
960 /*
961 * The Base Address register should be programmed before the command
962 * register(s)
963 */
964 for (i = 15; i >= 0; i--) {
965 pci_read_config_dword(dev, i * 4, &val);
966 if (val != dev->saved_config_space[i]) {
967 dev_printk(KERN_DEBUG, &dev->dev, "restoring config "
968 "space at offset %#x (was %#x, writing %#x)\n",
969 i, val, (int)dev->saved_config_space[i]);
970 pci_write_config_dword(dev,i * 4,
971 dev->saved_config_space[i]);
972 }
973 }
974 pci_restore_pcix_state(dev);
975 pci_restore_msi_state(dev);
976 pci_restore_iov_state(dev);
977
978 dev->state_saved = false;
979}
980
981struct pci_saved_state {
982 u32 config_space[16];
983 struct pci_cap_saved_data cap[0];
984};
985
986/**
987 * pci_store_saved_state - Allocate and return an opaque struct containing
988 * the device saved state.
989 * @dev: PCI device that we're dealing with
990 *
991 * Rerturn NULL if no state or error.
992 */
993struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev)
994{
995 struct pci_saved_state *state;
996 struct pci_cap_saved_state *tmp;
997 struct pci_cap_saved_data *cap;
998 struct hlist_node *pos;
999 size_t size;
1000
1001 if (!dev->state_saved)
1002 return NULL;
1003
1004 size = sizeof(*state) + sizeof(struct pci_cap_saved_data);
1005
1006 hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next)
1007 size += sizeof(struct pci_cap_saved_data) + tmp->cap.size;
1008
1009 state = kzalloc(size, GFP_KERNEL);
1010 if (!state)
1011 return NULL;
1012
1013 memcpy(state->config_space, dev->saved_config_space,
1014 sizeof(state->config_space));
1015
1016 cap = state->cap;
1017 hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next) {
1018 size_t len = sizeof(struct pci_cap_saved_data) + tmp->cap.size;
1019 memcpy(cap, &tmp->cap, len);
1020 cap = (struct pci_cap_saved_data *)((u8 *)cap + len);
1021 }
1022 /* Empty cap_save terminates list */
1023
1024 return state;
1025}
1026EXPORT_SYMBOL_GPL(pci_store_saved_state);
1027
1028/**
1029 * pci_load_saved_state - Reload the provided save state into struct pci_dev.
1030 * @dev: PCI device that we're dealing with
1031 * @state: Saved state returned from pci_store_saved_state()
1032 */
1033int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state)
1034{
1035 struct pci_cap_saved_data *cap;
1036
1037 dev->state_saved = false;
1038
1039 if (!state)
1040 return 0;
1041
1042 memcpy(dev->saved_config_space, state->config_space,
1043 sizeof(state->config_space));
1044
1045 cap = state->cap;
1046 while (cap->size) {
1047 struct pci_cap_saved_state *tmp;
1048
1049 tmp = pci_find_saved_cap(dev, cap->cap_nr);
1050 if (!tmp || tmp->cap.size != cap->size)
1051 return -EINVAL;
1052
1053 memcpy(tmp->cap.data, cap->data, tmp->cap.size);
1054 cap = (struct pci_cap_saved_data *)((u8 *)cap +
1055 sizeof(struct pci_cap_saved_data) + cap->size);
1056 }
1057
1058 dev->state_saved = true;
1059 return 0;
1060}
1061EXPORT_SYMBOL_GPL(pci_load_saved_state);
1062
1063/**
1064 * pci_load_and_free_saved_state - Reload the save state pointed to by state,
1065 * and free the memory allocated for it.
1066 * @dev: PCI device that we're dealing with
1067 * @state: Pointer to saved state returned from pci_store_saved_state()
1068 */
1069int pci_load_and_free_saved_state(struct pci_dev *dev,
1070 struct pci_saved_state **state)
1071{
1072 int ret = pci_load_saved_state(dev, *state);
1073 kfree(*state);
1074 *state = NULL;
1075 return ret;
1076}
1077EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state);
1078
1079static int do_pci_enable_device(struct pci_dev *dev, int bars)
1080{
1081 int err;
1082
1083 err = pci_set_power_state(dev, PCI_D0);
1084 if (err < 0 && err != -EIO)
1085 return err;
1086 err = pcibios_enable_device(dev, bars);
1087 if (err < 0)
1088 return err;
1089 pci_fixup_device(pci_fixup_enable, dev);
1090
1091 return 0;
1092}
1093
1094/**
1095 * pci_reenable_device - Resume abandoned device
1096 * @dev: PCI device to be resumed
1097 *
1098 * Note this function is a backend of pci_default_resume and is not supposed
1099 * to be called by normal code, write proper resume handler and use it instead.
1100 */
1101int pci_reenable_device(struct pci_dev *dev)
1102{
1103 if (pci_is_enabled(dev))
1104 return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
1105 return 0;
1106}
1107
1108static int __pci_enable_device_flags(struct pci_dev *dev,
1109 resource_size_t flags)
1110{
1111 int err;
1112 int i, bars = 0;
1113
1114 /*
1115 * Power state could be unknown at this point, either due to a fresh
1116 * boot or a device removal call. So get the current power state
1117 * so that things like MSI message writing will behave as expected
1118 * (e.g. if the device really is in D0 at enable time).
1119 */
1120 if (dev->pm_cap) {
1121 u16 pmcsr;
1122 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
1123 dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
1124 }
1125
1126 if (atomic_add_return(1, &dev->enable_cnt) > 1)
1127 return 0; /* already enabled */
1128
1129 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
1130 if (dev->resource[i].flags & flags)
1131 bars |= (1 << i);
1132
1133 err = do_pci_enable_device(dev, bars);
1134 if (err < 0)
1135 atomic_dec(&dev->enable_cnt);
1136 return err;
1137}
1138
1139/**
1140 * pci_enable_device_io - Initialize a device for use with IO space
1141 * @dev: PCI device to be initialized
1142 *
1143 * Initialize device before it's used by a driver. Ask low-level code
1144 * to enable I/O resources. Wake up the device if it was suspended.
1145 * Beware, this function can fail.
1146 */
1147int pci_enable_device_io(struct pci_dev *dev)
1148{
1149 return __pci_enable_device_flags(dev, IORESOURCE_IO);
1150}
1151
1152/**
1153 * pci_enable_device_mem - Initialize a device for use with Memory space
1154 * @dev: PCI device to be initialized
1155 *
1156 * Initialize device before it's used by a driver. Ask low-level code
1157 * to enable Memory resources. Wake up the device if it was suspended.
1158 * Beware, this function can fail.
1159 */
1160int pci_enable_device_mem(struct pci_dev *dev)
1161{
1162 return __pci_enable_device_flags(dev, IORESOURCE_MEM);
1163}
1164
1165/**
1166 * pci_enable_device - Initialize device before it's used by a driver.
1167 * @dev: PCI device to be initialized
1168 *
1169 * Initialize device before it's used by a driver. Ask low-level code
1170 * to enable I/O and memory. Wake up the device if it was suspended.
1171 * Beware, this function can fail.
1172 *
1173 * Note we don't actually enable the device many times if we call
1174 * this function repeatedly (we just increment the count).
1175 */
1176int pci_enable_device(struct pci_dev *dev)
1177{
1178 return __pci_enable_device_flags(dev, IORESOURCE_MEM | IORESOURCE_IO);
1179}
1180
1181/*
1182 * Managed PCI resources. This manages device on/off, intx/msi/msix
1183 * on/off and BAR regions. pci_dev itself records msi/msix status, so
1184 * there's no need to track it separately. pci_devres is initialized
1185 * when a device is enabled using managed PCI device enable interface.
1186 */
1187struct pci_devres {
1188 unsigned int enabled:1;
1189 unsigned int pinned:1;
1190 unsigned int orig_intx:1;
1191 unsigned int restore_intx:1;
1192 u32 region_mask;
1193};
1194
1195static void pcim_release(struct device *gendev, void *res)
1196{
1197 struct pci_dev *dev = container_of(gendev, struct pci_dev, dev);
1198 struct pci_devres *this = res;
1199 int i;
1200
1201 if (dev->msi_enabled)
1202 pci_disable_msi(dev);
1203 if (dev->msix_enabled)
1204 pci_disable_msix(dev);
1205
1206 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
1207 if (this->region_mask & (1 << i))
1208 pci_release_region(dev, i);
1209
1210 if (this->restore_intx)
1211 pci_intx(dev, this->orig_intx);
1212
1213 if (this->enabled && !this->pinned)
1214 pci_disable_device(dev);
1215}
1216
1217static struct pci_devres * get_pci_dr(struct pci_dev *pdev)
1218{
1219 struct pci_devres *dr, *new_dr;
1220
1221 dr = devres_find(&pdev->dev, pcim_release, NULL, NULL);
1222 if (dr)
1223 return dr;
1224
1225 new_dr = devres_alloc(pcim_release, sizeof(*new_dr), GFP_KERNEL);
1226 if (!new_dr)
1227 return NULL;
1228 return devres_get(&pdev->dev, new_dr, NULL, NULL);
1229}
1230
1231static struct pci_devres * find_pci_dr(struct pci_dev *pdev)
1232{
1233 if (pci_is_managed(pdev))
1234 return devres_find(&pdev->dev, pcim_release, NULL, NULL);
1235 return NULL;
1236}
1237
1238/**
1239 * pcim_enable_device - Managed pci_enable_device()
1240 * @pdev: PCI device to be initialized
1241 *
1242 * Managed pci_enable_device().
1243 */
1244int pcim_enable_device(struct pci_dev *pdev)
1245{
1246 struct pci_devres *dr;
1247 int rc;
1248
1249 dr = get_pci_dr(pdev);
1250 if (unlikely(!dr))
1251 return -ENOMEM;
1252 if (dr->enabled)
1253 return 0;
1254
1255 rc = pci_enable_device(pdev);
1256 if (!rc) {
1257 pdev->is_managed = 1;
1258 dr->enabled = 1;
1259 }
1260 return rc;
1261}
1262
1263/**
1264 * pcim_pin_device - Pin managed PCI device
1265 * @pdev: PCI device to pin
1266 *
1267 * Pin managed PCI device @pdev. Pinned device won't be disabled on
1268 * driver detach. @pdev must have been enabled with
1269 * pcim_enable_device().
1270 */
1271void pcim_pin_device(struct pci_dev *pdev)
1272{
1273 struct pci_devres *dr;
1274
1275 dr = find_pci_dr(pdev);
1276 WARN_ON(!dr || !dr->enabled);
1277 if (dr)
1278 dr->pinned = 1;
1279}
1280
1281/**
1282 * pcibios_disable_device - disable arch specific PCI resources for device dev
1283 * @dev: the PCI device to disable
1284 *
1285 * Disables architecture specific PCI resources for the device. This
1286 * is the default implementation. Architecture implementations can
1287 * override this.
1288 */
1289void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
1290
1291static void do_pci_disable_device(struct pci_dev *dev)
1292{
1293 u16 pci_command;
1294
1295 pci_read_config_word(dev, PCI_COMMAND, &pci_command);
1296 if (pci_command & PCI_COMMAND_MASTER) {
1297 pci_command &= ~PCI_COMMAND_MASTER;
1298 pci_write_config_word(dev, PCI_COMMAND, pci_command);
1299 }
1300
1301 pcibios_disable_device(dev);
1302}
1303
1304/**
1305 * pci_disable_enabled_device - Disable device without updating enable_cnt
1306 * @dev: PCI device to disable
1307 *
1308 * NOTE: This function is a backend of PCI power management routines and is
1309 * not supposed to be called drivers.
1310 */
1311void pci_disable_enabled_device(struct pci_dev *dev)
1312{
1313 if (pci_is_enabled(dev))
1314 do_pci_disable_device(dev);
1315}
1316
1317/**
1318 * pci_disable_device - Disable PCI device after use
1319 * @dev: PCI device to be disabled
1320 *
1321 * Signal to the system that the PCI device is not in use by the system
1322 * anymore. This only involves disabling PCI bus-mastering, if active.
1323 *
1324 * Note we don't actually disable the device until all callers of
1325 * pci_enable_device() have called pci_disable_device().
1326 */
1327void
1328pci_disable_device(struct pci_dev *dev)
1329{
1330 struct pci_devres *dr;
1331
1332 dr = find_pci_dr(dev);
1333 if (dr)
1334 dr->enabled = 0;
1335
1336 if (atomic_sub_return(1, &dev->enable_cnt) != 0)
1337 return;
1338
1339 do_pci_disable_device(dev);
1340
1341 dev->is_busmaster = 0;
1342}
1343
1344/**
1345 * pcibios_set_pcie_reset_state - set reset state for device dev
1346 * @dev: the PCIe device reset
1347 * @state: Reset state to enter into
1348 *
1349 *
1350 * Sets the PCIe reset state for the device. This is the default
1351 * implementation. Architecture implementations can override this.
1352 */
1353int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
1354 enum pcie_reset_state state)
1355{
1356 return -EINVAL;
1357}
1358
1359/**
1360 * pci_set_pcie_reset_state - set reset state for device dev
1361 * @dev: the PCIe device reset
1362 * @state: Reset state to enter into
1363 *
1364 *
1365 * Sets the PCI reset state for the device.
1366 */
1367int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
1368{
1369 return pcibios_set_pcie_reset_state(dev, state);
1370}
1371
1372/**
1373 * pci_check_pme_status - Check if given device has generated PME.
1374 * @dev: Device to check.
1375 *
1376 * Check the PME status of the device and if set, clear it and clear PME enable
1377 * (if set). Return 'true' if PME status and PME enable were both set or
1378 * 'false' otherwise.
1379 */
1380bool pci_check_pme_status(struct pci_dev *dev)
1381{
1382 int pmcsr_pos;
1383 u16 pmcsr;
1384 bool ret = false;
1385
1386 if (!dev->pm_cap)
1387 return false;
1388
1389 pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
1390 pci_read_config_word(dev, pmcsr_pos, &pmcsr);
1391 if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
1392 return false;
1393
1394 /* Clear PME status. */
1395 pmcsr |= PCI_PM_CTRL_PME_STATUS;
1396 if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
1397 /* Disable PME to avoid interrupt flood. */
1398 pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
1399 ret = true;
1400 }
1401
1402 pci_write_config_word(dev, pmcsr_pos, pmcsr);
1403
1404 return ret;
1405}
1406
1407/**
1408 * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
1409 * @dev: Device to handle.
1410 * @ign: Ignored.
1411 *
1412 * Check if @dev has generated PME and queue a resume request for it in that
1413 * case.
1414 */
1415static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
1416{
1417 if (pci_check_pme_status(dev)) {
1418 pci_wakeup_event(dev);
1419 pm_request_resume(&dev->dev);
1420 }
1421 return 0;
1422}
1423
1424/**
1425 * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
1426 * @bus: Top bus of the subtree to walk.
1427 */
1428void pci_pme_wakeup_bus(struct pci_bus *bus)
1429{
1430 if (bus)
1431 pci_walk_bus(bus, pci_pme_wakeup, NULL);
1432}
1433
1434/**
1435 * pci_pme_capable - check the capability of PCI device to generate PME#
1436 * @dev: PCI device to handle.
1437 * @state: PCI state from which device will issue PME#.
1438 */
1439bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
1440{
1441 if (!dev->pm_cap)
1442 return false;
1443
1444 return !!(dev->pme_support & (1 << state));
1445}
1446
1447static void pci_pme_list_scan(struct work_struct *work)
1448{
1449 struct pci_pme_device *pme_dev;
1450
1451 mutex_lock(&pci_pme_list_mutex);
1452 if (!list_empty(&pci_pme_list)) {
1453 list_for_each_entry(pme_dev, &pci_pme_list, list)
1454 pci_pme_wakeup(pme_dev->dev, NULL);
1455 schedule_delayed_work(&pci_pme_work, msecs_to_jiffies(PME_TIMEOUT));
1456 }
1457 mutex_unlock(&pci_pme_list_mutex);
1458}
1459
1460/**
1461 * pci_external_pme - is a device an external PCI PME source?
1462 * @dev: PCI device to check
1463 *
1464 */
1465
1466static bool pci_external_pme(struct pci_dev *dev)
1467{
1468 if (pci_is_pcie(dev) || dev->bus->number == 0)
1469 return false;
1470 return true;
1471}
1472
1473/**
1474 * pci_pme_active - enable or disable PCI device's PME# function
1475 * @dev: PCI device to handle.
1476 * @enable: 'true' to enable PME# generation; 'false' to disable it.
1477 *
1478 * The caller must verify that the device is capable of generating PME# before
1479 * calling this function with @enable equal to 'true'.
1480 */
1481void pci_pme_active(struct pci_dev *dev, bool enable)
1482{
1483 u16 pmcsr;
1484
1485 if (!dev->pm_cap)
1486 return;
1487
1488 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
1489 /* Clear PME_Status by writing 1 to it and enable PME# */
1490 pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
1491 if (!enable)
1492 pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
1493
1494 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
1495
1496 /* PCI (as opposed to PCIe) PME requires that the device have
1497 its PME# line hooked up correctly. Not all hardware vendors
1498 do this, so the PME never gets delivered and the device
1499 remains asleep. The easiest way around this is to
1500 periodically walk the list of suspended devices and check
1501 whether any have their PME flag set. The assumption is that
1502 we'll wake up often enough anyway that this won't be a huge
1503 hit, and the power savings from the devices will still be a
1504 win. */
1505
1506 if (pci_external_pme(dev)) {
1507 struct pci_pme_device *pme_dev;
1508 if (enable) {
1509 pme_dev = kmalloc(sizeof(struct pci_pme_device),
1510 GFP_KERNEL);
1511 if (!pme_dev)
1512 goto out;
1513 pme_dev->dev = dev;
1514 mutex_lock(&pci_pme_list_mutex);
1515 list_add(&pme_dev->list, &pci_pme_list);
1516 if (list_is_singular(&pci_pme_list))
1517 schedule_delayed_work(&pci_pme_work,
1518 msecs_to_jiffies(PME_TIMEOUT));
1519 mutex_unlock(&pci_pme_list_mutex);
1520 } else {
1521 mutex_lock(&pci_pme_list_mutex);
1522 list_for_each_entry(pme_dev, &pci_pme_list, list) {
1523 if (pme_dev->dev == dev) {
1524 list_del(&pme_dev->list);
1525 kfree(pme_dev);
1526 break;
1527 }
1528 }
1529 mutex_unlock(&pci_pme_list_mutex);
1530 }
1531 }
1532
1533out:
1534 dev_printk(KERN_DEBUG, &dev->dev, "PME# %s\n",
1535 enable ? "enabled" : "disabled");
1536}
1537
1538/**
1539 * __pci_enable_wake - enable PCI device as wakeup event source
1540 * @dev: PCI device affected
1541 * @state: PCI state from which device will issue wakeup events
1542 * @runtime: True if the events are to be generated at run time
1543 * @enable: True to enable event generation; false to disable
1544 *
1545 * This enables the device as a wakeup event source, or disables it.
1546 * When such events involves platform-specific hooks, those hooks are
1547 * called automatically by this routine.
1548 *
1549 * Devices with legacy power management (no standard PCI PM capabilities)
1550 * always require such platform hooks.
1551 *
1552 * RETURN VALUE:
1553 * 0 is returned on success
1554 * -EINVAL is returned if device is not supposed to wake up the system
1555 * Error code depending on the platform is returned if both the platform and
1556 * the native mechanism fail to enable the generation of wake-up events
1557 */
1558int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
1559 bool runtime, bool enable)
1560{
1561 int ret = 0;
1562
1563 if (enable && !runtime && !device_may_wakeup(&dev->dev))
1564 return -EINVAL;
1565
1566 /* Don't do the same thing twice in a row for one device. */
1567 if (!!enable == !!dev->wakeup_prepared)
1568 return 0;
1569
1570 /*
1571 * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
1572 * Anderson we should be doing PME# wake enable followed by ACPI wake
1573 * enable. To disable wake-up we call the platform first, for symmetry.
1574 */
1575
1576 if (enable) {
1577 int error;
1578
1579 if (pci_pme_capable(dev, state))
1580 pci_pme_active(dev, true);
1581 else
1582 ret = 1;
1583 error = runtime ? platform_pci_run_wake(dev, true) :
1584 platform_pci_sleep_wake(dev, true);
1585 if (ret)
1586 ret = error;
1587 if (!ret)
1588 dev->wakeup_prepared = true;
1589 } else {
1590 if (runtime)
1591 platform_pci_run_wake(dev, false);
1592 else
1593 platform_pci_sleep_wake(dev, false);
1594 pci_pme_active(dev, false);
1595 dev->wakeup_prepared = false;
1596 }
1597
1598 return ret;
1599}
1600EXPORT_SYMBOL(__pci_enable_wake);
1601
1602/**
1603 * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
1604 * @dev: PCI device to prepare
1605 * @enable: True to enable wake-up event generation; false to disable
1606 *
1607 * Many drivers want the device to wake up the system from D3_hot or D3_cold
1608 * and this function allows them to set that up cleanly - pci_enable_wake()
1609 * should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
1610 * ordering constraints.
1611 *
1612 * This function only returns error code if the device is not capable of
1613 * generating PME# from both D3_hot and D3_cold, and the platform is unable to
1614 * enable wake-up power for it.
1615 */
1616int pci_wake_from_d3(struct pci_dev *dev, bool enable)
1617{
1618 return pci_pme_capable(dev, PCI_D3cold) ?
1619 pci_enable_wake(dev, PCI_D3cold, enable) :
1620 pci_enable_wake(dev, PCI_D3hot, enable);
1621}
1622
1623/**
1624 * pci_target_state - find an appropriate low power state for a given PCI dev
1625 * @dev: PCI device
1626 *
1627 * Use underlying platform code to find a supported low power state for @dev.
1628 * If the platform can't manage @dev, return the deepest state from which it
1629 * can generate wake events, based on any available PME info.
1630 */
1631pci_power_t pci_target_state(struct pci_dev *dev)
1632{
1633 pci_power_t target_state = PCI_D3hot;
1634
1635 if (platform_pci_power_manageable(dev)) {
1636 /*
1637 * Call the platform to choose the target state of the device
1638 * and enable wake-up from this state if supported.
1639 */
1640 pci_power_t state = platform_pci_choose_state(dev);
1641
1642 switch (state) {
1643 case PCI_POWER_ERROR:
1644 case PCI_UNKNOWN:
1645 break;
1646 case PCI_D1:
1647 case PCI_D2:
1648 if (pci_no_d1d2(dev))
1649 break;
1650 default:
1651 target_state = state;
1652 }
1653 } else if (!dev->pm_cap) {
1654 target_state = PCI_D0;
1655 } else if (device_may_wakeup(&dev->dev)) {
1656 /*
1657 * Find the deepest state from which the device can generate
1658 * wake-up events, make it the target state and enable device
1659 * to generate PME#.
1660 */
1661 if (dev->pme_support) {
1662 while (target_state
1663 && !(dev->pme_support & (1 << target_state)))
1664 target_state--;
1665 }
1666 }
1667
1668 return target_state;
1669}
1670
1671/**
1672 * pci_prepare_to_sleep - prepare PCI device for system-wide transition into a sleep state
1673 * @dev: Device to handle.
1674 *
1675 * Choose the power state appropriate for the device depending on whether
1676 * it can wake up the system and/or is power manageable by the platform
1677 * (PCI_D3hot is the default) and put the device into that state.
1678 */
1679int pci_prepare_to_sleep(struct pci_dev *dev)
1680{
1681 pci_power_t target_state = pci_target_state(dev);
1682 int error;
1683
1684 if (target_state == PCI_POWER_ERROR)
1685 return -EIO;
1686
1687 pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
1688
1689 error = pci_set_power_state(dev, target_state);
1690
1691 if (error)
1692 pci_enable_wake(dev, target_state, false);
1693
1694 return error;
1695}
1696
1697/**
1698 * pci_back_from_sleep - turn PCI device on during system-wide transition into working state
1699 * @dev: Device to handle.
1700 *
1701 * Disable device's system wake-up capability and put it into D0.
1702 */
1703int pci_back_from_sleep(struct pci_dev *dev)
1704{
1705 pci_enable_wake(dev, PCI_D0, false);
1706 return pci_set_power_state(dev, PCI_D0);
1707}
1708
1709/**
1710 * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
1711 * @dev: PCI device being suspended.
1712 *
1713 * Prepare @dev to generate wake-up events at run time and put it into a low
1714 * power state.
1715 */
1716int pci_finish_runtime_suspend(struct pci_dev *dev)
1717{
1718 pci_power_t target_state = pci_target_state(dev);
1719 int error;
1720
1721 if (target_state == PCI_POWER_ERROR)
1722 return -EIO;
1723
1724 __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
1725
1726 error = pci_set_power_state(dev, target_state);
1727
1728 if (error)
1729 __pci_enable_wake(dev, target_state, true, false);
1730
1731 return error;
1732}
1733
1734/**
1735 * pci_dev_run_wake - Check if device can generate run-time wake-up events.
1736 * @dev: Device to check.
1737 *
1738 * Return true if the device itself is cabable of generating wake-up events
1739 * (through the platform or using the native PCIe PME) or if the device supports
1740 * PME and one of its upstream bridges can generate wake-up events.
1741 */
1742bool pci_dev_run_wake(struct pci_dev *dev)
1743{
1744 struct pci_bus *bus = dev->bus;
1745
1746 if (device_run_wake(&dev->dev))
1747 return true;
1748
1749 if (!dev->pme_support)
1750 return false;
1751
1752 while (bus->parent) {
1753 struct pci_dev *bridge = bus->self;
1754
1755 if (device_run_wake(&bridge->dev))
1756 return true;
1757
1758 bus = bus->parent;
1759 }
1760
1761 /* We have reached the root bus. */
1762 if (bus->bridge)
1763 return device_run_wake(bus->bridge);
1764
1765 return false;
1766}
1767EXPORT_SYMBOL_GPL(pci_dev_run_wake);
1768
1769/**
1770 * pci_pm_init - Initialize PM functions of given PCI device
1771 * @dev: PCI device to handle.
1772 */
1773void pci_pm_init(struct pci_dev *dev)
1774{
1775 int pm;
1776 u16 pmc;
1777
1778 pm_runtime_forbid(&dev->dev);
1779 device_enable_async_suspend(&dev->dev);
1780 dev->wakeup_prepared = false;
1781
1782 dev->pm_cap = 0;
1783
1784 /* find PCI PM capability in list */
1785 pm = pci_find_capability(dev, PCI_CAP_ID_PM);
1786 if (!pm)
1787 return;
1788 /* Check device's ability to generate PME# */
1789 pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
1790
1791 if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
1792 dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
1793 pmc & PCI_PM_CAP_VER_MASK);
1794 return;
1795 }
1796
1797 dev->pm_cap = pm;
1798 dev->d3_delay = PCI_PM_D3_WAIT;
1799
1800 dev->d1_support = false;
1801 dev->d2_support = false;
1802 if (!pci_no_d1d2(dev)) {
1803 if (pmc & PCI_PM_CAP_D1)
1804 dev->d1_support = true;
1805 if (pmc & PCI_PM_CAP_D2)
1806 dev->d2_support = true;
1807
1808 if (dev->d1_support || dev->d2_support)
1809 dev_printk(KERN_DEBUG, &dev->dev, "supports%s%s\n",
1810 dev->d1_support ? " D1" : "",
1811 dev->d2_support ? " D2" : "");
1812 }
1813
1814 pmc &= PCI_PM_CAP_PME_MASK;
1815 if (pmc) {
1816 dev_printk(KERN_DEBUG, &dev->dev,
1817 "PME# supported from%s%s%s%s%s\n",
1818 (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
1819 (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
1820 (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
1821 (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
1822 (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
1823 dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
1824 /*
1825 * Make device's PM flags reflect the wake-up capability, but
1826 * let the user space enable it to wake up the system as needed.
1827 */
1828 device_set_wakeup_capable(&dev->dev, true);
1829 /* Disable the PME# generation functionality */
1830 pci_pme_active(dev, false);
1831 } else {
1832 dev->pme_support = 0;
1833 }
1834}
1835
1836/**
1837 * platform_pci_wakeup_init - init platform wakeup if present
1838 * @dev: PCI device
1839 *
1840 * Some devices don't have PCI PM caps but can still generate wakeup
1841 * events through platform methods (like ACPI events). If @dev supports
1842 * platform wakeup events, set the device flag to indicate as much. This
1843 * may be redundant if the device also supports PCI PM caps, but double
1844 * initialization should be safe in that case.
1845 */
1846void platform_pci_wakeup_init(struct pci_dev *dev)
1847{
1848 if (!platform_pci_can_wakeup(dev))
1849 return;
1850
1851 device_set_wakeup_capable(&dev->dev, true);
1852 platform_pci_sleep_wake(dev, false);
1853}
1854
1855/**
1856 * pci_add_save_buffer - allocate buffer for saving given capability registers
1857 * @dev: the PCI device
1858 * @cap: the capability to allocate the buffer for
1859 * @size: requested size of the buffer
1860 */
1861static int pci_add_cap_save_buffer(
1862 struct pci_dev *dev, char cap, unsigned int size)
1863{
1864 int pos;
1865 struct pci_cap_saved_state *save_state;
1866
1867 pos = pci_find_capability(dev, cap);
1868 if (pos <= 0)
1869 return 0;
1870
1871 save_state = kzalloc(sizeof(*save_state) + size, GFP_KERNEL);
1872 if (!save_state)
1873 return -ENOMEM;
1874
1875 save_state->cap.cap_nr = cap;
1876 save_state->cap.size = size;
1877 pci_add_saved_cap(dev, save_state);
1878
1879 return 0;
1880}
1881
1882/**
1883 * pci_allocate_cap_save_buffers - allocate buffers for saving capabilities
1884 * @dev: the PCI device
1885 */
1886void pci_allocate_cap_save_buffers(struct pci_dev *dev)
1887{
1888 int error;
1889
1890 error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP,
1891 PCI_EXP_SAVE_REGS * sizeof(u16));
1892 if (error)
1893 dev_err(&dev->dev,
1894 "unable to preallocate PCI Express save buffer\n");
1895
1896 error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_PCIX, sizeof(u16));
1897 if (error)
1898 dev_err(&dev->dev,
1899 "unable to preallocate PCI-X save buffer\n");
1900}
1901
1902/**
1903 * pci_enable_ari - enable ARI forwarding if hardware support it
1904 * @dev: the PCI device
1905 */
1906void pci_enable_ari(struct pci_dev *dev)
1907{
1908 int pos;
1909 u32 cap;
1910 u16 flags, ctrl;
1911 struct pci_dev *bridge;
1912
1913 if (!pci_is_pcie(dev) || dev->devfn)
1914 return;
1915
1916 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
1917 if (!pos)
1918 return;
1919
1920 bridge = dev->bus->self;
1921 if (!bridge || !pci_is_pcie(bridge))
1922 return;
1923
1924 pos = pci_pcie_cap(bridge);
1925 if (!pos)
1926 return;
1927
1928 /* ARI is a PCIe v2 feature */
1929 pci_read_config_word(bridge, pos + PCI_EXP_FLAGS, &flags);
1930 if ((flags & PCI_EXP_FLAGS_VERS) < 2)
1931 return;
1932
1933 pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
1934 if (!(cap & PCI_EXP_DEVCAP2_ARI))
1935 return;
1936
1937 pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl);
1938 ctrl |= PCI_EXP_DEVCTL2_ARI;
1939 pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl);
1940
1941 bridge->ari_enabled = 1;
1942}
1943
1944/**
1945 * pci_enable_ido - enable ID-based ordering on a device
1946 * @dev: the PCI device
1947 * @type: which types of IDO to enable
1948 *
1949 * Enable ID-based ordering on @dev. @type can contain the bits
1950 * %PCI_EXP_IDO_REQUEST and/or %PCI_EXP_IDO_COMPLETION to indicate
1951 * which types of transactions are allowed to be re-ordered.
1952 */
1953void pci_enable_ido(struct pci_dev *dev, unsigned long type)
1954{
1955 int pos;
1956 u16 ctrl;
1957
1958 pos = pci_pcie_cap(dev);
1959 if (!pos)
1960 return;
1961
1962 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
1963 if (type & PCI_EXP_IDO_REQUEST)
1964 ctrl |= PCI_EXP_IDO_REQ_EN;
1965 if (type & PCI_EXP_IDO_COMPLETION)
1966 ctrl |= PCI_EXP_IDO_CMP_EN;
1967 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
1968}
1969EXPORT_SYMBOL(pci_enable_ido);
1970
1971/**
1972 * pci_disable_ido - disable ID-based ordering on a device
1973 * @dev: the PCI device
1974 * @type: which types of IDO to disable
1975 */
1976void pci_disable_ido(struct pci_dev *dev, unsigned long type)
1977{
1978 int pos;
1979 u16 ctrl;
1980
1981 if (!pci_is_pcie(dev))
1982 return;
1983
1984 pos = pci_pcie_cap(dev);
1985 if (!pos)
1986 return;
1987
1988 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
1989 if (type & PCI_EXP_IDO_REQUEST)
1990 ctrl &= ~PCI_EXP_IDO_REQ_EN;
1991 if (type & PCI_EXP_IDO_COMPLETION)
1992 ctrl &= ~PCI_EXP_IDO_CMP_EN;
1993 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
1994}
1995EXPORT_SYMBOL(pci_disable_ido);
1996
1997/**
1998 * pci_enable_obff - enable optimized buffer flush/fill
1999 * @dev: PCI device
2000 * @type: type of signaling to use
2001 *
2002 * Try to enable @type OBFF signaling on @dev. It will try using WAKE#
2003 * signaling if possible, falling back to message signaling only if
2004 * WAKE# isn't supported. @type should indicate whether the PCIe link
2005 * be brought out of L0s or L1 to send the message. It should be either
2006 * %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
2007 *
2008 * If your device can benefit from receiving all messages, even at the
2009 * power cost of bringing the link back up from a low power state, use
2010 * %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
2011 * preferred type).
2012 *
2013 * RETURNS:
2014 * Zero on success, appropriate error number on failure.
2015 */
2016int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
2017{
2018 int pos;
2019 u32 cap;
2020 u16 ctrl;
2021 int ret;
2022
2023 if (!pci_is_pcie(dev))
2024 return -ENOTSUPP;
2025
2026 pos = pci_pcie_cap(dev);
2027 if (!pos)
2028 return -ENOTSUPP;
2029
2030 pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
2031 if (!(cap & PCI_EXP_OBFF_MASK))
2032 return -ENOTSUPP; /* no OBFF support at all */
2033
2034 /* Make sure the topology supports OBFF as well */
2035 if (dev->bus) {
2036 ret = pci_enable_obff(dev->bus->self, type);
2037 if (ret)
2038 return ret;
2039 }
2040
2041 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2042 if (cap & PCI_EXP_OBFF_WAKE)
2043 ctrl |= PCI_EXP_OBFF_WAKE_EN;
2044 else {
2045 switch (type) {
2046 case PCI_EXP_OBFF_SIGNAL_L0:
2047 if (!(ctrl & PCI_EXP_OBFF_WAKE_EN))
2048 ctrl |= PCI_EXP_OBFF_MSGA_EN;
2049 break;
2050 case PCI_EXP_OBFF_SIGNAL_ALWAYS:
2051 ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
2052 ctrl |= PCI_EXP_OBFF_MSGB_EN;
2053 break;
2054 default:
2055 WARN(1, "bad OBFF signal type\n");
2056 return -ENOTSUPP;
2057 }
2058 }
2059 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2060
2061 return 0;
2062}
2063EXPORT_SYMBOL(pci_enable_obff);
2064
2065/**
2066 * pci_disable_obff - disable optimized buffer flush/fill
2067 * @dev: PCI device
2068 *
2069 * Disable OBFF on @dev.
2070 */
2071void pci_disable_obff(struct pci_dev *dev)
2072{
2073 int pos;
2074 u16 ctrl;
2075
2076 if (!pci_is_pcie(dev))
2077 return;
2078
2079 pos = pci_pcie_cap(dev);
2080 if (!pos)
2081 return;
2082
2083 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2084 ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
2085 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2086}
2087EXPORT_SYMBOL(pci_disable_obff);
2088
2089/**
2090 * pci_ltr_supported - check whether a device supports LTR
2091 * @dev: PCI device
2092 *
2093 * RETURNS:
2094 * True if @dev supports latency tolerance reporting, false otherwise.
2095 */
2096bool pci_ltr_supported(struct pci_dev *dev)
2097{
2098 int pos;
2099 u32 cap;
2100
2101 if (!pci_is_pcie(dev))
2102 return false;
2103
2104 pos = pci_pcie_cap(dev);
2105 if (!pos)
2106 return false;
2107
2108 pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
2109
2110 return cap & PCI_EXP_DEVCAP2_LTR;
2111}
2112EXPORT_SYMBOL(pci_ltr_supported);
2113
2114/**
2115 * pci_enable_ltr - enable latency tolerance reporting
2116 * @dev: PCI device
2117 *
2118 * Enable LTR on @dev if possible, which means enabling it first on
2119 * upstream ports.
2120 *
2121 * RETURNS:
2122 * Zero on success, errno on failure.
2123 */
2124int pci_enable_ltr(struct pci_dev *dev)
2125{
2126 int pos;
2127 u16 ctrl;
2128 int ret;
2129
2130 if (!pci_ltr_supported(dev))
2131 return -ENOTSUPP;
2132
2133 pos = pci_pcie_cap(dev);
2134 if (!pos)
2135 return -ENOTSUPP;
2136
2137 /* Only primary function can enable/disable LTR */
2138 if (PCI_FUNC(dev->devfn) != 0)
2139 return -EINVAL;
2140
2141 /* Enable upstream ports first */
2142 if (dev->bus) {
2143 ret = pci_enable_ltr(dev->bus->self);
2144 if (ret)
2145 return ret;
2146 }
2147
2148 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2149 ctrl |= PCI_EXP_LTR_EN;
2150 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2151
2152 return 0;
2153}
2154EXPORT_SYMBOL(pci_enable_ltr);
2155
2156/**
2157 * pci_disable_ltr - disable latency tolerance reporting
2158 * @dev: PCI device
2159 */
2160void pci_disable_ltr(struct pci_dev *dev)
2161{
2162 int pos;
2163 u16 ctrl;
2164
2165 if (!pci_ltr_supported(dev))
2166 return;
2167
2168 pos = pci_pcie_cap(dev);
2169 if (!pos)
2170 return;
2171
2172 /* Only primary function can enable/disable LTR */
2173 if (PCI_FUNC(dev->devfn) != 0)
2174 return;
2175
2176 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2177 ctrl &= ~PCI_EXP_LTR_EN;
2178 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2179}
2180EXPORT_SYMBOL(pci_disable_ltr);
2181
2182static int __pci_ltr_scale(int *val)
2183{
2184 int scale = 0;
2185
2186 while (*val > 1023) {
2187 *val = (*val + 31) / 32;
2188 scale++;
2189 }
2190 return scale;
2191}
2192
2193/**
2194 * pci_set_ltr - set LTR latency values
2195 * @dev: PCI device
2196 * @snoop_lat_ns: snoop latency in nanoseconds
2197 * @nosnoop_lat_ns: nosnoop latency in nanoseconds
2198 *
2199 * Figure out the scale and set the LTR values accordingly.
2200 */
2201int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns)
2202{
2203 int pos, ret, snoop_scale, nosnoop_scale;
2204 u16 val;
2205
2206 if (!pci_ltr_supported(dev))
2207 return -ENOTSUPP;
2208
2209 snoop_scale = __pci_ltr_scale(&snoop_lat_ns);
2210 nosnoop_scale = __pci_ltr_scale(&nosnoop_lat_ns);
2211
2212 if (snoop_lat_ns > PCI_LTR_VALUE_MASK ||
2213 nosnoop_lat_ns > PCI_LTR_VALUE_MASK)
2214 return -EINVAL;
2215
2216 if ((snoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)) ||
2217 (nosnoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)))
2218 return -EINVAL;
2219
2220 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR);
2221 if (!pos)
2222 return -ENOTSUPP;
2223
2224 val = (snoop_scale << PCI_LTR_SCALE_SHIFT) | snoop_lat_ns;
2225 ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_SNOOP_LAT, val);
2226 if (ret != 4)
2227 return -EIO;
2228
2229 val = (nosnoop_scale << PCI_LTR_SCALE_SHIFT) | nosnoop_lat_ns;
2230 ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_NOSNOOP_LAT, val);
2231 if (ret != 4)
2232 return -EIO;
2233
2234 return 0;
2235}
2236EXPORT_SYMBOL(pci_set_ltr);
2237
2238static int pci_acs_enable;
2239
2240/**
2241 * pci_request_acs - ask for ACS to be enabled if supported
2242 */
2243void pci_request_acs(void)
2244{
2245 pci_acs_enable = 1;
2246}
2247
2248/**
2249 * pci_enable_acs - enable ACS if hardware support it
2250 * @dev: the PCI device
2251 */
2252void pci_enable_acs(struct pci_dev *dev)
2253{
2254 int pos;
2255 u16 cap;
2256 u16 ctrl;
2257
2258 if (!pci_acs_enable)
2259 return;
2260
2261 if (!pci_is_pcie(dev))
2262 return;
2263
2264 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
2265 if (!pos)
2266 return;
2267
2268 pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
2269 pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
2270
2271 /* Source Validation */
2272 ctrl |= (cap & PCI_ACS_SV);
2273
2274 /* P2P Request Redirect */
2275 ctrl |= (cap & PCI_ACS_RR);
2276
2277 /* P2P Completion Redirect */
2278 ctrl |= (cap & PCI_ACS_CR);
2279
2280 /* Upstream Forwarding */
2281 ctrl |= (cap & PCI_ACS_UF);
2282
2283 pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
2284}
2285
2286/**
2287 * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
2288 * @dev: the PCI device
2289 * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
2290 *
2291 * Perform INTx swizzling for a device behind one level of bridge. This is
2292 * required by section 9.1 of the PCI-to-PCI bridge specification for devices
2293 * behind bridges on add-in cards. For devices with ARI enabled, the slot
2294 * number is always 0 (see the Implementation Note in section 2.2.8.1 of
2295 * the PCI Express Base Specification, Revision 2.1)
2296 */
2297u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
2298{
2299 int slot;
2300
2301 if (pci_ari_enabled(dev->bus))
2302 slot = 0;
2303 else
2304 slot = PCI_SLOT(dev->devfn);
2305
2306 return (((pin - 1) + slot) % 4) + 1;
2307}
2308
2309int
2310pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
2311{
2312 u8 pin;
2313
2314 pin = dev->pin;
2315 if (!pin)
2316 return -1;
2317
2318 while (!pci_is_root_bus(dev->bus)) {
2319 pin = pci_swizzle_interrupt_pin(dev, pin);
2320 dev = dev->bus->self;
2321 }
2322 *bridge = dev;
2323 return pin;
2324}
2325
2326/**
2327 * pci_common_swizzle - swizzle INTx all the way to root bridge
2328 * @dev: the PCI device
2329 * @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
2330 *
2331 * Perform INTx swizzling for a device. This traverses through all PCI-to-PCI
2332 * bridges all the way up to a PCI root bus.
2333 */
2334u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
2335{
2336 u8 pin = *pinp;
2337
2338 while (!pci_is_root_bus(dev->bus)) {
2339 pin = pci_swizzle_interrupt_pin(dev, pin);
2340 dev = dev->bus->self;
2341 }
2342 *pinp = pin;
2343 return PCI_SLOT(dev->devfn);
2344}
2345
2346/**
2347 * pci_release_region - Release a PCI bar
2348 * @pdev: PCI device whose resources were previously reserved by pci_request_region
2349 * @bar: BAR to release
2350 *
2351 * Releases the PCI I/O and memory resources previously reserved by a
2352 * successful call to pci_request_region. Call this function only
2353 * after all use of the PCI regions has ceased.
2354 */
2355void pci_release_region(struct pci_dev *pdev, int bar)
2356{
2357 struct pci_devres *dr;
2358
2359 if (pci_resource_len(pdev, bar) == 0)
2360 return;
2361 if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
2362 release_region(pci_resource_start(pdev, bar),
2363 pci_resource_len(pdev, bar));
2364 else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
2365 release_mem_region(pci_resource_start(pdev, bar),
2366 pci_resource_len(pdev, bar));
2367
2368 dr = find_pci_dr(pdev);
2369 if (dr)
2370 dr->region_mask &= ~(1 << bar);
2371}
2372
2373/**
2374 * __pci_request_region - Reserved PCI I/O and memory resource
2375 * @pdev: PCI device whose resources are to be reserved
2376 * @bar: BAR to be reserved
2377 * @res_name: Name to be associated with resource.
2378 * @exclusive: whether the region access is exclusive or not
2379 *
2380 * Mark the PCI region associated with PCI device @pdev BR @bar as
2381 * being reserved by owner @res_name. Do not access any
2382 * address inside the PCI regions unless this call returns
2383 * successfully.
2384 *
2385 * If @exclusive is set, then the region is marked so that userspace
2386 * is explicitly not allowed to map the resource via /dev/mem or
2387 * sysfs MMIO access.
2388 *
2389 * Returns 0 on success, or %EBUSY on error. A warning
2390 * message is also printed on failure.
2391 */
2392static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name,
2393 int exclusive)
2394{
2395 struct pci_devres *dr;
2396
2397 if (pci_resource_len(pdev, bar) == 0)
2398 return 0;
2399
2400 if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
2401 if (!request_region(pci_resource_start(pdev, bar),
2402 pci_resource_len(pdev, bar), res_name))
2403 goto err_out;
2404 }
2405 else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
2406 if (!__request_mem_region(pci_resource_start(pdev, bar),
2407 pci_resource_len(pdev, bar), res_name,
2408 exclusive))
2409 goto err_out;
2410 }
2411
2412 dr = find_pci_dr(pdev);
2413 if (dr)
2414 dr->region_mask |= 1 << bar;
2415
2416 return 0;
2417
2418err_out:
2419 dev_warn(&pdev->dev, "BAR %d: can't reserve %pR\n", bar,
2420 &pdev->resource[bar]);
2421 return -EBUSY;
2422}
2423
2424/**
2425 * pci_request_region - Reserve PCI I/O and memory resource
2426 * @pdev: PCI device whose resources are to be reserved
2427 * @bar: BAR to be reserved
2428 * @res_name: Name to be associated with resource
2429 *
2430 * Mark the PCI region associated with PCI device @pdev BAR @bar as
2431 * being reserved by owner @res_name. Do not access any
2432 * address inside the PCI regions unless this call returns
2433 * successfully.
2434 *
2435 * Returns 0 on success, or %EBUSY on error. A warning
2436 * message is also printed on failure.
2437 */
2438int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
2439{
2440 return __pci_request_region(pdev, bar, res_name, 0);
2441}
2442
2443/**
2444 * pci_request_region_exclusive - Reserved PCI I/O and memory resource
2445 * @pdev: PCI device whose resources are to be reserved
2446 * @bar: BAR to be reserved
2447 * @res_name: Name to be associated with resource.
2448 *
2449 * Mark the PCI region associated with PCI device @pdev BR @bar as
2450 * being reserved by owner @res_name. Do not access any
2451 * address inside the PCI regions unless this call returns
2452 * successfully.
2453 *
2454 * Returns 0 on success, or %EBUSY on error. A warning
2455 * message is also printed on failure.
2456 *
2457 * The key difference that _exclusive makes it that userspace is
2458 * explicitly not allowed to map the resource via /dev/mem or
2459 * sysfs.
2460 */
2461int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
2462{
2463 return __pci_request_region(pdev, bar, res_name, IORESOURCE_EXCLUSIVE);
2464}
2465/**
2466 * pci_release_selected_regions - Release selected PCI I/O and memory resources
2467 * @pdev: PCI device whose resources were previously reserved
2468 * @bars: Bitmask of BARs to be released
2469 *
2470 * Release selected PCI I/O and memory resources previously reserved.
2471 * Call this function only after all use of the PCI regions has ceased.
2472 */
2473void pci_release_selected_regions(struct pci_dev *pdev, int bars)
2474{
2475 int i;
2476
2477 for (i = 0; i < 6; i++)
2478 if (bars & (1 << i))
2479 pci_release_region(pdev, i);
2480}
2481
2482int __pci_request_selected_regions(struct pci_dev *pdev, int bars,
2483 const char *res_name, int excl)
2484{
2485 int i;
2486
2487 for (i = 0; i < 6; i++)
2488 if (bars & (1 << i))
2489 if (__pci_request_region(pdev, i, res_name, excl))
2490 goto err_out;
2491 return 0;
2492
2493err_out:
2494 while(--i >= 0)
2495 if (bars & (1 << i))
2496 pci_release_region(pdev, i);
2497
2498 return -EBUSY;
2499}
2500
2501
2502/**
2503 * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
2504 * @pdev: PCI device whose resources are to be reserved
2505 * @bars: Bitmask of BARs to be requested
2506 * @res_name: Name to be associated with resource
2507 */
2508int pci_request_selected_regions(struct pci_dev *pdev, int bars,
2509 const char *res_name)
2510{
2511 return __pci_request_selected_regions(pdev, bars, res_name, 0);
2512}
2513
2514int pci_request_selected_regions_exclusive(struct pci_dev *pdev,
2515 int bars, const char *res_name)
2516{
2517 return __pci_request_selected_regions(pdev, bars, res_name,
2518 IORESOURCE_EXCLUSIVE);
2519}
2520
2521/**
2522 * pci_release_regions - Release reserved PCI I/O and memory resources
2523 * @pdev: PCI device whose resources were previously reserved by pci_request_regions
2524 *
2525 * Releases all PCI I/O and memory resources previously reserved by a
2526 * successful call to pci_request_regions. Call this function only
2527 * after all use of the PCI regions has ceased.
2528 */
2529
2530void pci_release_regions(struct pci_dev *pdev)
2531{
2532 pci_release_selected_regions(pdev, (1 << 6) - 1);
2533}
2534
2535/**
2536 * pci_request_regions - Reserved PCI I/O and memory resources
2537 * @pdev: PCI device whose resources are to be reserved
2538 * @res_name: Name to be associated with resource.
2539 *
2540 * Mark all PCI regions associated with PCI device @pdev as
2541 * being reserved by owner @res_name. Do not access any
2542 * address inside the PCI regions unless this call returns
2543 * successfully.
2544 *
2545 * Returns 0 on success, or %EBUSY on error. A warning
2546 * message is also printed on failure.
2547 */
2548int pci_request_regions(struct pci_dev *pdev, const char *res_name)
2549{
2550 return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
2551}
2552
2553/**
2554 * pci_request_regions_exclusive - Reserved PCI I/O and memory resources
2555 * @pdev: PCI device whose resources are to be reserved
2556 * @res_name: Name to be associated with resource.
2557 *
2558 * Mark all PCI regions associated with PCI device @pdev as
2559 * being reserved by owner @res_name. Do not access any
2560 * address inside the PCI regions unless this call returns
2561 * successfully.
2562 *
2563 * pci_request_regions_exclusive() will mark the region so that
2564 * /dev/mem and the sysfs MMIO access will not be allowed.
2565 *
2566 * Returns 0 on success, or %EBUSY on error. A warning
2567 * message is also printed on failure.
2568 */
2569int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
2570{
2571 return pci_request_selected_regions_exclusive(pdev,
2572 ((1 << 6) - 1), res_name);
2573}
2574
2575static void __pci_set_master(struct pci_dev *dev, bool enable)
2576{
2577 u16 old_cmd, cmd;
2578
2579 pci_read_config_word(dev, PCI_COMMAND, &old_cmd);
2580 if (enable)
2581 cmd = old_cmd | PCI_COMMAND_MASTER;
2582 else
2583 cmd = old_cmd & ~PCI_COMMAND_MASTER;
2584 if (cmd != old_cmd) {
2585 dev_dbg(&dev->dev, "%s bus mastering\n",
2586 enable ? "enabling" : "disabling");
2587 pci_write_config_word(dev, PCI_COMMAND, cmd);
2588 }
2589 dev->is_busmaster = enable;
2590}
2591
2592/**
2593 * pci_set_master - enables bus-mastering for device dev
2594 * @dev: the PCI device to enable
2595 *
2596 * Enables bus-mastering on the device and calls pcibios_set_master()
2597 * to do the needed arch specific settings.
2598 */
2599void pci_set_master(struct pci_dev *dev)
2600{
2601 __pci_set_master(dev, true);
2602 pcibios_set_master(dev);
2603}
2604
2605/**
2606 * pci_clear_master - disables bus-mastering for device dev
2607 * @dev: the PCI device to disable
2608 */
2609void pci_clear_master(struct pci_dev *dev)
2610{
2611 __pci_set_master(dev, false);
2612}
2613
2614/**
2615 * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
2616 * @dev: the PCI device for which MWI is to be enabled
2617 *
2618 * Helper function for pci_set_mwi.
2619 * Originally copied from drivers/net/acenic.c.
2620 * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
2621 *
2622 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
2623 */
2624int pci_set_cacheline_size(struct pci_dev *dev)
2625{
2626 u8 cacheline_size;
2627
2628 if (!pci_cache_line_size)
2629 return -EINVAL;
2630
2631 /* Validate current setting: the PCI_CACHE_LINE_SIZE must be
2632 equal to or multiple of the right value. */
2633 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
2634 if (cacheline_size >= pci_cache_line_size &&
2635 (cacheline_size % pci_cache_line_size) == 0)
2636 return 0;
2637
2638 /* Write the correct value. */
2639 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
2640 /* Read it back. */
2641 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
2642 if (cacheline_size == pci_cache_line_size)
2643 return 0;
2644
2645 dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
2646 "supported\n", pci_cache_line_size << 2);
2647
2648 return -EINVAL;
2649}
2650EXPORT_SYMBOL_GPL(pci_set_cacheline_size);
2651
2652#ifdef PCI_DISABLE_MWI
2653int pci_set_mwi(struct pci_dev *dev)
2654{
2655 return 0;
2656}
2657
2658int pci_try_set_mwi(struct pci_dev *dev)
2659{
2660 return 0;
2661}
2662
2663void pci_clear_mwi(struct pci_dev *dev)
2664{
2665}
2666
2667#else
2668
2669/**
2670 * pci_set_mwi - enables memory-write-invalidate PCI transaction
2671 * @dev: the PCI device for which MWI is enabled
2672 *
2673 * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
2674 *
2675 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
2676 */
2677int
2678pci_set_mwi(struct pci_dev *dev)
2679{
2680 int rc;
2681 u16 cmd;
2682
2683 rc = pci_set_cacheline_size(dev);
2684 if (rc)
2685 return rc;
2686
2687 pci_read_config_word(dev, PCI_COMMAND, &cmd);
2688 if (! (cmd & PCI_COMMAND_INVALIDATE)) {
2689 dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
2690 cmd |= PCI_COMMAND_INVALIDATE;
2691 pci_write_config_word(dev, PCI_COMMAND, cmd);
2692 }
2693
2694 return 0;
2695}
2696
2697/**
2698 * pci_try_set_mwi - enables memory-write-invalidate PCI transaction
2699 * @dev: the PCI device for which MWI is enabled
2700 *
2701 * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
2702 * Callers are not required to check the return value.
2703 *
2704 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
2705 */
2706int pci_try_set_mwi(struct pci_dev *dev)
2707{
2708 int rc = pci_set_mwi(dev);
2709 return rc;
2710}
2711
2712/**
2713 * pci_clear_mwi - disables Memory-Write-Invalidate for device dev
2714 * @dev: the PCI device to disable
2715 *
2716 * Disables PCI Memory-Write-Invalidate transaction on the device
2717 */
2718void
2719pci_clear_mwi(struct pci_dev *dev)
2720{
2721 u16 cmd;
2722
2723 pci_read_config_word(dev, PCI_COMMAND, &cmd);
2724 if (cmd & PCI_COMMAND_INVALIDATE) {
2725 cmd &= ~PCI_COMMAND_INVALIDATE;
2726 pci_write_config_word(dev, PCI_COMMAND, cmd);
2727 }
2728}
2729#endif /* ! PCI_DISABLE_MWI */
2730
2731/**
2732 * pci_intx - enables/disables PCI INTx for device dev
2733 * @pdev: the PCI device to operate on
2734 * @enable: boolean: whether to enable or disable PCI INTx
2735 *
2736 * Enables/disables PCI INTx for device dev
2737 */
2738void
2739pci_intx(struct pci_dev *pdev, int enable)
2740{
2741 u16 pci_command, new;
2742
2743 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
2744
2745 if (enable) {
2746 new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
2747 } else {
2748 new = pci_command | PCI_COMMAND_INTX_DISABLE;
2749 }
2750
2751 if (new != pci_command) {
2752 struct pci_devres *dr;
2753
2754 pci_write_config_word(pdev, PCI_COMMAND, new);
2755
2756 dr = find_pci_dr(pdev);
2757 if (dr && !dr->restore_intx) {
2758 dr->restore_intx = 1;
2759 dr->orig_intx = !enable;
2760 }
2761 }
2762}
2763
2764/**
2765 * pci_msi_off - disables any msi or msix capabilities
2766 * @dev: the PCI device to operate on
2767 *
2768 * If you want to use msi see pci_enable_msi and friends.
2769 * This is a lower level primitive that allows us to disable
2770 * msi operation at the device level.
2771 */
2772void pci_msi_off(struct pci_dev *dev)
2773{
2774 int pos;
2775 u16 control;
2776
2777 pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
2778 if (pos) {
2779 pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
2780 control &= ~PCI_MSI_FLAGS_ENABLE;
2781 pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
2782 }
2783 pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
2784 if (pos) {
2785 pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
2786 control &= ~PCI_MSIX_FLAGS_ENABLE;
2787 pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
2788 }
2789}
2790EXPORT_SYMBOL_GPL(pci_msi_off);
2791
2792int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
2793{
2794 return dma_set_max_seg_size(&dev->dev, size);
2795}
2796EXPORT_SYMBOL(pci_set_dma_max_seg_size);
2797
2798int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
2799{
2800 return dma_set_seg_boundary(&dev->dev, mask);
2801}
2802EXPORT_SYMBOL(pci_set_dma_seg_boundary);
2803
2804static int pcie_flr(struct pci_dev *dev, int probe)
2805{
2806 int i;
2807 int pos;
2808 u32 cap;
2809 u16 status, control;
2810
2811 pos = pci_pcie_cap(dev);
2812 if (!pos)
2813 return -ENOTTY;
2814
2815 pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
2816 if (!(cap & PCI_EXP_DEVCAP_FLR))
2817 return -ENOTTY;
2818
2819 if (probe)
2820 return 0;
2821
2822 /* Wait for Transaction Pending bit clean */
2823 for (i = 0; i < 4; i++) {
2824 if (i)
2825 msleep((1 << (i - 1)) * 100);
2826
2827 pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
2828 if (!(status & PCI_EXP_DEVSTA_TRPND))
2829 goto clear;
2830 }
2831
2832 dev_err(&dev->dev, "transaction is not cleared; "
2833 "proceeding with reset anyway\n");
2834
2835clear:
2836 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &control);
2837 control |= PCI_EXP_DEVCTL_BCR_FLR;
2838 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, control);
2839
2840 msleep(100);
2841
2842 return 0;
2843}
2844
2845static int pci_af_flr(struct pci_dev *dev, int probe)
2846{
2847 int i;
2848 int pos;
2849 u8 cap;
2850 u8 status;
2851
2852 pos = pci_find_capability(dev, PCI_CAP_ID_AF);
2853 if (!pos)
2854 return -ENOTTY;
2855
2856 pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
2857 if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
2858 return -ENOTTY;
2859
2860 if (probe)
2861 return 0;
2862
2863 /* Wait for Transaction Pending bit clean */
2864 for (i = 0; i < 4; i++) {
2865 if (i)
2866 msleep((1 << (i - 1)) * 100);
2867
2868 pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
2869 if (!(status & PCI_AF_STATUS_TP))
2870 goto clear;
2871 }
2872
2873 dev_err(&dev->dev, "transaction is not cleared; "
2874 "proceeding with reset anyway\n");
2875
2876clear:
2877 pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
2878 msleep(100);
2879
2880 return 0;
2881}
2882
2883/**
2884 * pci_pm_reset - Put device into PCI_D3 and back into PCI_D0.
2885 * @dev: Device to reset.
2886 * @probe: If set, only check if the device can be reset this way.
2887 *
2888 * If @dev supports native PCI PM and its PCI_PM_CTRL_NO_SOFT_RESET flag is
2889 * unset, it will be reinitialized internally when going from PCI_D3hot to
2890 * PCI_D0. If that's the case and the device is not in a low-power state
2891 * already, force it into PCI_D3hot and back to PCI_D0, causing it to be reset.
2892 *
2893 * NOTE: This causes the caller to sleep for twice the device power transition
2894 * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms
2895 * by devault (i.e. unless the @dev's d3_delay field has a different value).
2896 * Moreover, only devices in D0 can be reset by this function.
2897 */
2898static int pci_pm_reset(struct pci_dev *dev, int probe)
2899{
2900 u16 csr;
2901
2902 if (!dev->pm_cap)
2903 return -ENOTTY;
2904
2905 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
2906 if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
2907 return -ENOTTY;
2908
2909 if (probe)
2910 return 0;
2911
2912 if (dev->current_state != PCI_D0)
2913 return -EINVAL;
2914
2915 csr &= ~PCI_PM_CTRL_STATE_MASK;
2916 csr |= PCI_D3hot;
2917 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
2918 pci_dev_d3_sleep(dev);
2919
2920 csr &= ~PCI_PM_CTRL_STATE_MASK;
2921 csr |= PCI_D0;
2922 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
2923 pci_dev_d3_sleep(dev);
2924
2925 return 0;
2926}
2927
2928static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
2929{
2930 u16 ctrl;
2931 struct pci_dev *pdev;
2932
2933 if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
2934 return -ENOTTY;
2935
2936 list_for_each_entry(pdev, &dev->bus->devices, bus_list)
2937 if (pdev != dev)
2938 return -ENOTTY;
2939
2940 if (probe)
2941 return 0;
2942
2943 pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
2944 ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
2945 pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
2946 msleep(100);
2947
2948 ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
2949 pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
2950 msleep(100);
2951
2952 return 0;
2953}
2954
2955static int pci_dev_reset(struct pci_dev *dev, int probe)
2956{
2957 int rc;
2958
2959 might_sleep();
2960
2961 if (!probe) {
2962 pci_block_user_cfg_access(dev);
2963 /* block PM suspend, driver probe, etc. */
2964 device_lock(&dev->dev);
2965 }
2966
2967 rc = pci_dev_specific_reset(dev, probe);
2968 if (rc != -ENOTTY)
2969 goto done;
2970
2971 rc = pcie_flr(dev, probe);
2972 if (rc != -ENOTTY)
2973 goto done;
2974
2975 rc = pci_af_flr(dev, probe);
2976 if (rc != -ENOTTY)
2977 goto done;
2978
2979 rc = pci_pm_reset(dev, probe);
2980 if (rc != -ENOTTY)
2981 goto done;
2982
2983 rc = pci_parent_bus_reset(dev, probe);
2984done:
2985 if (!probe) {
2986 device_unlock(&dev->dev);
2987 pci_unblock_user_cfg_access(dev);
2988 }
2989
2990 return rc;
2991}
2992
2993/**
2994 * __pci_reset_function - reset a PCI device function
2995 * @dev: PCI device to reset
2996 *
2997 * Some devices allow an individual function to be reset without affecting
2998 * other functions in the same device. The PCI device must be responsive
2999 * to PCI config space in order to use this function.
3000 *
3001 * The device function is presumed to be unused when this function is called.
3002 * Resetting the device will make the contents of PCI configuration space
3003 * random, so any caller of this must be prepared to reinitialise the
3004 * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
3005 * etc.
3006 *
3007 * Returns 0 if the device function was successfully reset or negative if the
3008 * device doesn't support resetting a single function.
3009 */
3010int __pci_reset_function(struct pci_dev *dev)
3011{
3012 return pci_dev_reset(dev, 0);
3013}
3014EXPORT_SYMBOL_GPL(__pci_reset_function);
3015
3016/**
3017 * pci_probe_reset_function - check whether the device can be safely reset
3018 * @dev: PCI device to reset
3019 *
3020 * Some devices allow an individual function to be reset without affecting
3021 * other functions in the same device. The PCI device must be responsive
3022 * to PCI config space in order to use this function.
3023 *
3024 * Returns 0 if the device function can be reset or negative if the
3025 * device doesn't support resetting a single function.
3026 */
3027int pci_probe_reset_function(struct pci_dev *dev)
3028{
3029 return pci_dev_reset(dev, 1);
3030}
3031
3032/**
3033 * pci_reset_function - quiesce and reset a PCI device function
3034 * @dev: PCI device to reset
3035 *
3036 * Some devices allow an individual function to be reset without affecting
3037 * other functions in the same device. The PCI device must be responsive
3038 * to PCI config space in order to use this function.
3039 *
3040 * This function does not just reset the PCI portion of a device, but
3041 * clears all the state associated with the device. This function differs
3042 * from __pci_reset_function in that it saves and restores device state
3043 * over the reset.
3044 *
3045 * Returns 0 if the device function was successfully reset or negative if the
3046 * device doesn't support resetting a single function.
3047 */
3048int pci_reset_function(struct pci_dev *dev)
3049{
3050 int rc;
3051
3052 rc = pci_dev_reset(dev, 1);
3053 if (rc)
3054 return rc;
3055
3056 pci_save_state(dev);
3057
3058 /*
3059 * both INTx and MSI are disabled after the Interrupt Disable bit
3060 * is set and the Bus Master bit is cleared.
3061 */
3062 pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
3063
3064 rc = pci_dev_reset(dev, 0);
3065
3066 pci_restore_state(dev);
3067
3068 return rc;
3069}
3070EXPORT_SYMBOL_GPL(pci_reset_function);
3071
3072/**
3073 * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
3074 * @dev: PCI device to query
3075 *
3076 * Returns mmrbc: maximum designed memory read count in bytes
3077 * or appropriate error value.
3078 */
3079int pcix_get_max_mmrbc(struct pci_dev *dev)
3080{
3081 int cap;
3082 u32 stat;
3083
3084 cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
3085 if (!cap)
3086 return -EINVAL;
3087
3088 if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
3089 return -EINVAL;
3090
3091 return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21);
3092}
3093EXPORT_SYMBOL(pcix_get_max_mmrbc);
3094
3095/**
3096 * pcix_get_mmrbc - get PCI-X maximum memory read byte count
3097 * @dev: PCI device to query
3098 *
3099 * Returns mmrbc: maximum memory read count in bytes
3100 * or appropriate error value.
3101 */
3102int pcix_get_mmrbc(struct pci_dev *dev)
3103{
3104 int cap;
3105 u16 cmd;
3106
3107 cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
3108 if (!cap)
3109 return -EINVAL;
3110
3111 if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
3112 return -EINVAL;
3113
3114 return 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
3115}
3116EXPORT_SYMBOL(pcix_get_mmrbc);
3117
3118/**
3119 * pcix_set_mmrbc - set PCI-X maximum memory read byte count
3120 * @dev: PCI device to query
3121 * @mmrbc: maximum memory read count in bytes
3122 * valid values are 512, 1024, 2048, 4096
3123 *
3124 * If possible sets maximum memory read byte count, some bridges have erratas
3125 * that prevent this.
3126 */
3127int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
3128{
3129 int cap;
3130 u32 stat, v, o;
3131 u16 cmd;
3132
3133 if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc))
3134 return -EINVAL;
3135
3136 v = ffs(mmrbc) - 10;
3137
3138 cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
3139 if (!cap)
3140 return -EINVAL;
3141
3142 if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
3143 return -EINVAL;
3144
3145 if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
3146 return -E2BIG;
3147
3148 if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
3149 return -EINVAL;
3150
3151 o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
3152 if (o != v) {
3153 if (v > o && dev->bus &&
3154 (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
3155 return -EIO;
3156
3157 cmd &= ~PCI_X_CMD_MAX_READ;
3158 cmd |= v << 2;
3159 if (pci_write_config_word(dev, cap + PCI_X_CMD, cmd))
3160 return -EIO;
3161 }
3162 return 0;
3163}
3164EXPORT_SYMBOL(pcix_set_mmrbc);
3165
3166/**
3167 * pcie_get_readrq - get PCI Express read request size
3168 * @dev: PCI device to query
3169 *
3170 * Returns maximum memory read request in bytes
3171 * or appropriate error value.
3172 */
3173int pcie_get_readrq(struct pci_dev *dev)
3174{
3175 int ret, cap;
3176 u16 ctl;
3177
3178 cap = pci_pcie_cap(dev);
3179 if (!cap)
3180 return -EINVAL;
3181
3182 ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3183 if (!ret)
3184 ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
3185
3186 return ret;
3187}
3188EXPORT_SYMBOL(pcie_get_readrq);
3189
3190/**
3191 * pcie_set_readrq - set PCI Express maximum memory read request
3192 * @dev: PCI device to query
3193 * @rq: maximum memory read count in bytes
3194 * valid values are 128, 256, 512, 1024, 2048, 4096
3195 *
3196 * If possible sets maximum memory read request in bytes
3197 */
3198int pcie_set_readrq(struct pci_dev *dev, int rq)
3199{
3200 int cap, err = -EINVAL;
3201 u16 ctl, v;
3202
3203 if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
3204 goto out;
3205
3206 v = (ffs(rq) - 8) << 12;
3207
3208 cap = pci_pcie_cap(dev);
3209 if (!cap)
3210 goto out;
3211
3212 err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3213 if (err)
3214 goto out;
3215
3216 if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
3217 ctl &= ~PCI_EXP_DEVCTL_READRQ;
3218 ctl |= v;
3219 err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, ctl);
3220 }
3221
3222out:
3223 return err;
3224}
3225EXPORT_SYMBOL(pcie_set_readrq);
3226
3227/**
3228 * pcie_get_mps - get PCI Express maximum payload size
3229 * @dev: PCI device to query
3230 *
3231 * Returns maximum payload size in bytes
3232 * or appropriate error value.
3233 */
3234int pcie_get_mps(struct pci_dev *dev)
3235{
3236 int ret, cap;
3237 u16 ctl;
3238
3239 cap = pci_pcie_cap(dev);
3240 if (!cap)
3241 return -EINVAL;
3242
3243 ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3244 if (!ret)
3245 ret = 128 << ((ctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
3246
3247 return ret;
3248}
3249
3250/**
3251 * pcie_set_mps - set PCI Express maximum payload size
3252 * @dev: PCI device to query
3253 * @mps: maximum payload size in bytes
3254 * valid values are 128, 256, 512, 1024, 2048, 4096
3255 *
3256 * If possible sets maximum payload size
3257 */
3258int pcie_set_mps(struct pci_dev *dev, int mps)
3259{
3260 int cap, err = -EINVAL;
3261 u16 ctl, v;
3262
3263 if (mps < 128 || mps > 4096 || !is_power_of_2(mps))
3264 goto out;
3265
3266 v = ffs(mps) - 8;
3267 if (v > dev->pcie_mpss)
3268 goto out;
3269 v <<= 5;
3270
3271 cap = pci_pcie_cap(dev);
3272 if (!cap)
3273 goto out;
3274
3275 err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3276 if (err)
3277 goto out;
3278
3279 if ((ctl & PCI_EXP_DEVCTL_PAYLOAD) != v) {
3280 ctl &= ~PCI_EXP_DEVCTL_PAYLOAD;
3281 ctl |= v;
3282 err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, ctl);
3283 }
3284out:
3285 return err;
3286}
3287
3288/**
3289 * pci_select_bars - Make BAR mask from the type of resource
3290 * @dev: the PCI device for which BAR mask is made
3291 * @flags: resource type mask to be selected
3292 *
3293 * This helper routine makes bar mask from the type of resource.
3294 */
3295int pci_select_bars(struct pci_dev *dev, unsigned long flags)
3296{
3297 int i, bars = 0;
3298 for (i = 0; i < PCI_NUM_RESOURCES; i++)
3299 if (pci_resource_flags(dev, i) & flags)
3300 bars |= (1 << i);
3301 return bars;
3302}
3303
3304/**
3305 * pci_resource_bar - get position of the BAR associated with a resource
3306 * @dev: the PCI device
3307 * @resno: the resource number
3308 * @type: the BAR type to be filled in
3309 *
3310 * Returns BAR position in config space, or 0 if the BAR is invalid.
3311 */
3312int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
3313{
3314 int reg;
3315
3316 if (resno < PCI_ROM_RESOURCE) {
3317 *type = pci_bar_unknown;
3318 return PCI_BASE_ADDRESS_0 + 4 * resno;
3319 } else if (resno == PCI_ROM_RESOURCE) {
3320 *type = pci_bar_mem32;
3321 return dev->rom_base_reg;
3322 } else if (resno < PCI_BRIDGE_RESOURCES) {
3323 /* device specific resource */
3324 reg = pci_iov_resource_bar(dev, resno, type);
3325 if (reg)
3326 return reg;
3327 }
3328
3329 dev_err(&dev->dev, "BAR %d: invalid resource\n", resno);
3330 return 0;
3331}
3332
3333/* Some architectures require additional programming to enable VGA */
3334static arch_set_vga_state_t arch_set_vga_state;
3335
3336void __init pci_register_set_vga_state(arch_set_vga_state_t func)
3337{
3338 arch_set_vga_state = func; /* NULL disables */
3339}
3340
3341static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
3342 unsigned int command_bits, u32 flags)
3343{
3344 if (arch_set_vga_state)
3345 return arch_set_vga_state(dev, decode, command_bits,
3346 flags);
3347 return 0;
3348}
3349
3350/**
3351 * pci_set_vga_state - set VGA decode state on device and parents if requested
3352 * @dev: the PCI device
3353 * @decode: true = enable decoding, false = disable decoding
3354 * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
3355 * @flags: traverse ancestors and change bridges
3356 * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE
3357 */
3358int pci_set_vga_state(struct pci_dev *dev, bool decode,
3359 unsigned int command_bits, u32 flags)
3360{
3361 struct pci_bus *bus;
3362 struct pci_dev *bridge;
3363 u16 cmd;
3364 int rc;
3365
3366 WARN_ON((flags & PCI_VGA_STATE_CHANGE_DECODES) & (command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)));
3367
3368 /* ARCH specific VGA enables */
3369 rc = pci_set_vga_state_arch(dev, decode, command_bits, flags);
3370 if (rc)
3371 return rc;
3372
3373 if (flags & PCI_VGA_STATE_CHANGE_DECODES) {
3374 pci_read_config_word(dev, PCI_COMMAND, &cmd);
3375 if (decode == true)
3376 cmd |= command_bits;
3377 else
3378 cmd &= ~command_bits;
3379 pci_write_config_word(dev, PCI_COMMAND, cmd);
3380 }
3381
3382 if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
3383 return 0;
3384
3385 bus = dev->bus;
3386 while (bus) {
3387 bridge = bus->self;
3388 if (bridge) {
3389 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
3390 &cmd);
3391 if (decode == true)
3392 cmd |= PCI_BRIDGE_CTL_VGA;
3393 else
3394 cmd &= ~PCI_BRIDGE_CTL_VGA;
3395 pci_write_config_word(bridge, PCI_BRIDGE_CONTROL,
3396 cmd);
3397 }
3398 bus = bus->parent;
3399 }
3400 return 0;
3401}
3402
3403#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
3404static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
3405static DEFINE_SPINLOCK(resource_alignment_lock);
3406
3407/**
3408 * pci_specified_resource_alignment - get resource alignment specified by user.
3409 * @dev: the PCI device to get
3410 *
3411 * RETURNS: Resource alignment if it is specified.
3412 * Zero if it is not specified.
3413 */
3414resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
3415{
3416 int seg, bus, slot, func, align_order, count;
3417 resource_size_t align = 0;
3418 char *p;
3419
3420 spin_lock(&resource_alignment_lock);
3421 p = resource_alignment_param;
3422 while (*p) {
3423 count = 0;
3424 if (sscanf(p, "%d%n", &align_order, &count) == 1 &&
3425 p[count] == '@') {
3426 p += count + 1;
3427 } else {
3428 align_order = -1;
3429 }
3430 if (sscanf(p, "%x:%x:%x.%x%n",
3431 &seg, &bus, &slot, &func, &count) != 4) {
3432 seg = 0;
3433 if (sscanf(p, "%x:%x.%x%n",
3434 &bus, &slot, &func, &count) != 3) {
3435 /* Invalid format */
3436 printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
3437 p);
3438 break;
3439 }
3440 }
3441 p += count;
3442 if (seg == pci_domain_nr(dev->bus) &&
3443 bus == dev->bus->number &&
3444 slot == PCI_SLOT(dev->devfn) &&
3445 func == PCI_FUNC(dev->devfn)) {
3446 if (align_order == -1) {
3447 align = PAGE_SIZE;
3448 } else {
3449 align = 1 << align_order;
3450 }
3451 /* Found */
3452 break;
3453 }
3454 if (*p != ';' && *p != ',') {
3455 /* End of param or invalid format */
3456 break;
3457 }
3458 p++;
3459 }
3460 spin_unlock(&resource_alignment_lock);
3461 return align;
3462}
3463
3464/**
3465 * pci_is_reassigndev - check if specified PCI is target device to reassign
3466 * @dev: the PCI device to check
3467 *
3468 * RETURNS: non-zero for PCI device is a target device to reassign,
3469 * or zero is not.
3470 */
3471int pci_is_reassigndev(struct pci_dev *dev)
3472{
3473 return (pci_specified_resource_alignment(dev) != 0);
3474}
3475
3476ssize_t pci_set_resource_alignment_param(const char *buf, size_t count)
3477{
3478 if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1)
3479 count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1;
3480 spin_lock(&resource_alignment_lock);
3481 strncpy(resource_alignment_param, buf, count);
3482 resource_alignment_param[count] = '\0';
3483 spin_unlock(&resource_alignment_lock);
3484 return count;
3485}
3486
3487ssize_t pci_get_resource_alignment_param(char *buf, size_t size)
3488{
3489 size_t count;
3490 spin_lock(&resource_alignment_lock);
3491 count = snprintf(buf, size, "%s", resource_alignment_param);
3492 spin_unlock(&resource_alignment_lock);
3493 return count;
3494}
3495
3496static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf)
3497{
3498 return pci_get_resource_alignment_param(buf, PAGE_SIZE);
3499}
3500
3501static ssize_t pci_resource_alignment_store(struct bus_type *bus,
3502 const char *buf, size_t count)
3503{
3504 return pci_set_resource_alignment_param(buf, count);
3505}
3506
3507BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
3508 pci_resource_alignment_store);
3509
3510static int __init pci_resource_alignment_sysfs_init(void)
3511{
3512 return bus_create_file(&pci_bus_type,
3513 &bus_attr_resource_alignment);
3514}
3515
3516late_initcall(pci_resource_alignment_sysfs_init);
3517
3518static void __devinit pci_no_domains(void)
3519{
3520#ifdef CONFIG_PCI_DOMAINS
3521 pci_domains_supported = 0;
3522#endif
3523}
3524
3525/**
3526 * pci_ext_cfg_enabled - can we access extended PCI config space?
3527 * @dev: The PCI device of the root bridge.
3528 *
3529 * Returns 1 if we can access PCI extended config space (offsets
3530 * greater than 0xff). This is the default implementation. Architecture
3531 * implementations can override this.
3532 */
3533int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
3534{
3535 return 1;
3536}
3537
3538void __weak pci_fixup_cardbus(struct pci_bus *bus)
3539{
3540}
3541EXPORT_SYMBOL(pci_fixup_cardbus);
3542
3543static int __init pci_setup(char *str)
3544{
3545 while (str) {
3546 char *k = strchr(str, ',');
3547 if (k)
3548 *k++ = 0;
3549 if (*str && (str = pcibios_setup(str)) && *str) {
3550 if (!strcmp(str, "nomsi")) {
3551 pci_no_msi();
3552 } else if (!strcmp(str, "noaer")) {
3553 pci_no_aer();
3554 } else if (!strncmp(str, "realloc", 7)) {
3555 pci_realloc();
3556 } else if (!strcmp(str, "nodomains")) {
3557 pci_no_domains();
3558 } else if (!strncmp(str, "cbiosize=", 9)) {
3559 pci_cardbus_io_size = memparse(str + 9, &str);
3560 } else if (!strncmp(str, "cbmemsize=", 10)) {
3561 pci_cardbus_mem_size = memparse(str + 10, &str);
3562 } else if (!strncmp(str, "resource_alignment=", 19)) {
3563 pci_set_resource_alignment_param(str + 19,
3564 strlen(str + 19));
3565 } else if (!strncmp(str, "ecrc=", 5)) {
3566 pcie_ecrc_get_policy(str + 5);
3567 } else if (!strncmp(str, "hpiosize=", 9)) {
3568 pci_hotplug_io_size = memparse(str + 9, &str);
3569 } else if (!strncmp(str, "hpmemsize=", 10)) {
3570 pci_hotplug_mem_size = memparse(str + 10, &str);
3571 } else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
3572 pcie_bus_config = PCIE_BUS_TUNE_OFF;
3573 } else if (!strncmp(str, "pcie_bus_safe", 13)) {
3574 pcie_bus_config = PCIE_BUS_SAFE;
3575 } else if (!strncmp(str, "pcie_bus_perf", 13)) {
3576 pcie_bus_config = PCIE_BUS_PERFORMANCE;
3577 } else if (!strncmp(str, "pcie_bus_peer2peer", 18)) {
3578 pcie_bus_config = PCIE_BUS_PEER2PEER;
3579 } else {
3580 printk(KERN_ERR "PCI: Unknown option `%s'\n",
3581 str);
3582 }
3583 }
3584 str = k;
3585 }
3586 return 0;
3587}
3588early_param("pci", pci_setup);
3589
3590EXPORT_SYMBOL(pci_reenable_device);
3591EXPORT_SYMBOL(pci_enable_device_io);
3592EXPORT_SYMBOL(pci_enable_device_mem);
3593EXPORT_SYMBOL(pci_enable_device);
3594EXPORT_SYMBOL(pcim_enable_device);
3595EXPORT_SYMBOL(pcim_pin_device);
3596EXPORT_SYMBOL(pci_disable_device);
3597EXPORT_SYMBOL(pci_find_capability);
3598EXPORT_SYMBOL(pci_bus_find_capability);
3599EXPORT_SYMBOL(pci_release_regions);
3600EXPORT_SYMBOL(pci_request_regions);
3601EXPORT_SYMBOL(pci_request_regions_exclusive);
3602EXPORT_SYMBOL(pci_release_region);
3603EXPORT_SYMBOL(pci_request_region);
3604EXPORT_SYMBOL(pci_request_region_exclusive);
3605EXPORT_SYMBOL(pci_release_selected_regions);
3606EXPORT_SYMBOL(pci_request_selected_regions);
3607EXPORT_SYMBOL(pci_request_selected_regions_exclusive);
3608EXPORT_SYMBOL(pci_set_master);
3609EXPORT_SYMBOL(pci_clear_master);
3610EXPORT_SYMBOL(pci_set_mwi);
3611EXPORT_SYMBOL(pci_try_set_mwi);
3612EXPORT_SYMBOL(pci_clear_mwi);
3613EXPORT_SYMBOL_GPL(pci_intx);
3614EXPORT_SYMBOL(pci_assign_resource);
3615EXPORT_SYMBOL(pci_find_parent_resource);
3616EXPORT_SYMBOL(pci_select_bars);
3617
3618EXPORT_SYMBOL(pci_set_power_state);
3619EXPORT_SYMBOL(pci_save_state);
3620EXPORT_SYMBOL(pci_restore_state);
3621EXPORT_SYMBOL(pci_pme_capable);
3622EXPORT_SYMBOL(pci_pme_active);
3623EXPORT_SYMBOL(pci_wake_from_d3);
3624EXPORT_SYMBOL(pci_target_state);
3625EXPORT_SYMBOL(pci_prepare_to_sleep);
3626EXPORT_SYMBOL(pci_back_from_sleep);
3627EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
1/*
2 * PCI Bus Services, see include/linux/pci.h for further explanation.
3 *
4 * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
5 * David Mosberger-Tang
6 *
7 * Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
8 */
9
10#include <linux/kernel.h>
11#include <linux/delay.h>
12#include <linux/init.h>
13#include <linux/pci.h>
14#include <linux/pm.h>
15#include <linux/slab.h>
16#include <linux/module.h>
17#include <linux/spinlock.h>
18#include <linux/string.h>
19#include <linux/log2.h>
20#include <linux/pci-aspm.h>
21#include <linux/pm_wakeup.h>
22#include <linux/interrupt.h>
23#include <linux/device.h>
24#include <linux/pm_runtime.h>
25#include <asm-generic/pci-bridge.h>
26#include <asm/setup.h>
27#include "pci.h"
28
29const char *pci_power_names[] = {
30 "error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
31};
32EXPORT_SYMBOL_GPL(pci_power_names);
33
34int isa_dma_bridge_buggy;
35EXPORT_SYMBOL(isa_dma_bridge_buggy);
36
37int pci_pci_problems;
38EXPORT_SYMBOL(pci_pci_problems);
39
40unsigned int pci_pm_d3_delay;
41
42static void pci_pme_list_scan(struct work_struct *work);
43
44static LIST_HEAD(pci_pme_list);
45static DEFINE_MUTEX(pci_pme_list_mutex);
46static DECLARE_DELAYED_WORK(pci_pme_work, pci_pme_list_scan);
47
48struct pci_pme_device {
49 struct list_head list;
50 struct pci_dev *dev;
51};
52
53#define PME_TIMEOUT 1000 /* How long between PME checks */
54
55static void pci_dev_d3_sleep(struct pci_dev *dev)
56{
57 unsigned int delay = dev->d3_delay;
58
59 if (delay < pci_pm_d3_delay)
60 delay = pci_pm_d3_delay;
61
62 msleep(delay);
63}
64
65#ifdef CONFIG_PCI_DOMAINS
66int pci_domains_supported = 1;
67#endif
68
69#define DEFAULT_CARDBUS_IO_SIZE (256)
70#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
71/* pci=cbmemsize=nnM,cbiosize=nn can override this */
72unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
73unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
74
75#define DEFAULT_HOTPLUG_IO_SIZE (256)
76#define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024)
77/* pci=hpmemsize=nnM,hpiosize=nn can override this */
78unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
79unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
80
81enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
82
83/*
84 * The default CLS is used if arch didn't set CLS explicitly and not
85 * all pci devices agree on the same value. Arch can override either
86 * the dfl or actual value as it sees fit. Don't forget this is
87 * measured in 32-bit words, not bytes.
88 */
89u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2;
90u8 pci_cache_line_size;
91
92/*
93 * If we set up a device for bus mastering, we need to check the latency
94 * timer as certain BIOSes forget to set it properly.
95 */
96unsigned int pcibios_max_latency = 255;
97
98/* If set, the PCIe ARI capability will not be used. */
99static bool pcie_ari_disabled;
100
101/**
102 * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
103 * @bus: pointer to PCI bus structure to search
104 *
105 * Given a PCI bus, returns the highest PCI bus number present in the set
106 * including the given PCI bus and its list of child PCI buses.
107 */
108unsigned char pci_bus_max_busnr(struct pci_bus* bus)
109{
110 struct list_head *tmp;
111 unsigned char max, n;
112
113 max = bus->subordinate;
114 list_for_each(tmp, &bus->children) {
115 n = pci_bus_max_busnr(pci_bus_b(tmp));
116 if(n > max)
117 max = n;
118 }
119 return max;
120}
121EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
122
123#ifdef CONFIG_HAS_IOMEM
124void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
125{
126 /*
127 * Make sure the BAR is actually a memory resource, not an IO resource
128 */
129 if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
130 WARN_ON(1);
131 return NULL;
132 }
133 return ioremap_nocache(pci_resource_start(pdev, bar),
134 pci_resource_len(pdev, bar));
135}
136EXPORT_SYMBOL_GPL(pci_ioremap_bar);
137#endif
138
139#if 0
140/**
141 * pci_max_busnr - returns maximum PCI bus number
142 *
143 * Returns the highest PCI bus number present in the system global list of
144 * PCI buses.
145 */
146unsigned char __devinit
147pci_max_busnr(void)
148{
149 struct pci_bus *bus = NULL;
150 unsigned char max, n;
151
152 max = 0;
153 while ((bus = pci_find_next_bus(bus)) != NULL) {
154 n = pci_bus_max_busnr(bus);
155 if(n > max)
156 max = n;
157 }
158 return max;
159}
160
161#endif /* 0 */
162
163#define PCI_FIND_CAP_TTL 48
164
165static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
166 u8 pos, int cap, int *ttl)
167{
168 u8 id;
169
170 while ((*ttl)--) {
171 pci_bus_read_config_byte(bus, devfn, pos, &pos);
172 if (pos < 0x40)
173 break;
174 pos &= ~3;
175 pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_ID,
176 &id);
177 if (id == 0xff)
178 break;
179 if (id == cap)
180 return pos;
181 pos += PCI_CAP_LIST_NEXT;
182 }
183 return 0;
184}
185
186static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn,
187 u8 pos, int cap)
188{
189 int ttl = PCI_FIND_CAP_TTL;
190
191 return __pci_find_next_cap_ttl(bus, devfn, pos, cap, &ttl);
192}
193
194int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
195{
196 return __pci_find_next_cap(dev->bus, dev->devfn,
197 pos + PCI_CAP_LIST_NEXT, cap);
198}
199EXPORT_SYMBOL_GPL(pci_find_next_capability);
200
201static int __pci_bus_find_cap_start(struct pci_bus *bus,
202 unsigned int devfn, u8 hdr_type)
203{
204 u16 status;
205
206 pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
207 if (!(status & PCI_STATUS_CAP_LIST))
208 return 0;
209
210 switch (hdr_type) {
211 case PCI_HEADER_TYPE_NORMAL:
212 case PCI_HEADER_TYPE_BRIDGE:
213 return PCI_CAPABILITY_LIST;
214 case PCI_HEADER_TYPE_CARDBUS:
215 return PCI_CB_CAPABILITY_LIST;
216 default:
217 return 0;
218 }
219
220 return 0;
221}
222
223/**
224 * pci_find_capability - query for devices' capabilities
225 * @dev: PCI device to query
226 * @cap: capability code
227 *
228 * Tell if a device supports a given PCI capability.
229 * Returns the address of the requested capability structure within the
230 * device's PCI configuration space or 0 in case the device does not
231 * support it. Possible values for @cap:
232 *
233 * %PCI_CAP_ID_PM Power Management
234 * %PCI_CAP_ID_AGP Accelerated Graphics Port
235 * %PCI_CAP_ID_VPD Vital Product Data
236 * %PCI_CAP_ID_SLOTID Slot Identification
237 * %PCI_CAP_ID_MSI Message Signalled Interrupts
238 * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
239 * %PCI_CAP_ID_PCIX PCI-X
240 * %PCI_CAP_ID_EXP PCI Express
241 */
242int pci_find_capability(struct pci_dev *dev, int cap)
243{
244 int pos;
245
246 pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
247 if (pos)
248 pos = __pci_find_next_cap(dev->bus, dev->devfn, pos, cap);
249
250 return pos;
251}
252
253/**
254 * pci_bus_find_capability - query for devices' capabilities
255 * @bus: the PCI bus to query
256 * @devfn: PCI device to query
257 * @cap: capability code
258 *
259 * Like pci_find_capability() but works for pci devices that do not have a
260 * pci_dev structure set up yet.
261 *
262 * Returns the address of the requested capability structure within the
263 * device's PCI configuration space or 0 in case the device does not
264 * support it.
265 */
266int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
267{
268 int pos;
269 u8 hdr_type;
270
271 pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
272
273 pos = __pci_bus_find_cap_start(bus, devfn, hdr_type & 0x7f);
274 if (pos)
275 pos = __pci_find_next_cap(bus, devfn, pos, cap);
276
277 return pos;
278}
279
280/**
281 * pci_find_ext_capability - Find an extended capability
282 * @dev: PCI device to query
283 * @cap: capability code
284 *
285 * Returns the address of the requested extended capability structure
286 * within the device's PCI configuration space or 0 if the device does
287 * not support it. Possible values for @cap:
288 *
289 * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
290 * %PCI_EXT_CAP_ID_VC Virtual Channel
291 * %PCI_EXT_CAP_ID_DSN Device Serial Number
292 * %PCI_EXT_CAP_ID_PWR Power Budgeting
293 */
294int pci_find_ext_capability(struct pci_dev *dev, int cap)
295{
296 u32 header;
297 int ttl;
298 int pos = PCI_CFG_SPACE_SIZE;
299
300 /* minimum 8 bytes per capability */
301 ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
302
303 if (dev->cfg_size <= PCI_CFG_SPACE_SIZE)
304 return 0;
305
306 if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
307 return 0;
308
309 /*
310 * If we have no capabilities, this is indicated by cap ID,
311 * cap version and next pointer all being 0.
312 */
313 if (header == 0)
314 return 0;
315
316 while (ttl-- > 0) {
317 if (PCI_EXT_CAP_ID(header) == cap)
318 return pos;
319
320 pos = PCI_EXT_CAP_NEXT(header);
321 if (pos < PCI_CFG_SPACE_SIZE)
322 break;
323
324 if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
325 break;
326 }
327
328 return 0;
329}
330EXPORT_SYMBOL_GPL(pci_find_ext_capability);
331
332/**
333 * pci_bus_find_ext_capability - find an extended capability
334 * @bus: the PCI bus to query
335 * @devfn: PCI device to query
336 * @cap: capability code
337 *
338 * Like pci_find_ext_capability() but works for pci devices that do not have a
339 * pci_dev structure set up yet.
340 *
341 * Returns the address of the requested capability structure within the
342 * device's PCI configuration space or 0 in case the device does not
343 * support it.
344 */
345int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
346 int cap)
347{
348 u32 header;
349 int ttl;
350 int pos = PCI_CFG_SPACE_SIZE;
351
352 /* minimum 8 bytes per capability */
353 ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
354
355 if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
356 return 0;
357 if (header == 0xffffffff || header == 0)
358 return 0;
359
360 while (ttl-- > 0) {
361 if (PCI_EXT_CAP_ID(header) == cap)
362 return pos;
363
364 pos = PCI_EXT_CAP_NEXT(header);
365 if (pos < PCI_CFG_SPACE_SIZE)
366 break;
367
368 if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
369 break;
370 }
371
372 return 0;
373}
374
375static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
376{
377 int rc, ttl = PCI_FIND_CAP_TTL;
378 u8 cap, mask;
379
380 if (ht_cap == HT_CAPTYPE_SLAVE || ht_cap == HT_CAPTYPE_HOST)
381 mask = HT_3BIT_CAP_MASK;
382 else
383 mask = HT_5BIT_CAP_MASK;
384
385 pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
386 PCI_CAP_ID_HT, &ttl);
387 while (pos) {
388 rc = pci_read_config_byte(dev, pos + 3, &cap);
389 if (rc != PCIBIOS_SUCCESSFUL)
390 return 0;
391
392 if ((cap & mask) == ht_cap)
393 return pos;
394
395 pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn,
396 pos + PCI_CAP_LIST_NEXT,
397 PCI_CAP_ID_HT, &ttl);
398 }
399
400 return 0;
401}
402/**
403 * pci_find_next_ht_capability - query a device's Hypertransport capabilities
404 * @dev: PCI device to query
405 * @pos: Position from which to continue searching
406 * @ht_cap: Hypertransport capability code
407 *
408 * To be used in conjunction with pci_find_ht_capability() to search for
409 * all capabilities matching @ht_cap. @pos should always be a value returned
410 * from pci_find_ht_capability().
411 *
412 * NB. To be 100% safe against broken PCI devices, the caller should take
413 * steps to avoid an infinite loop.
414 */
415int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap)
416{
417 return __pci_find_next_ht_cap(dev, pos + PCI_CAP_LIST_NEXT, ht_cap);
418}
419EXPORT_SYMBOL_GPL(pci_find_next_ht_capability);
420
421/**
422 * pci_find_ht_capability - query a device's Hypertransport capabilities
423 * @dev: PCI device to query
424 * @ht_cap: Hypertransport capability code
425 *
426 * Tell if a device supports a given Hypertransport capability.
427 * Returns an address within the device's PCI configuration space
428 * or 0 in case the device does not support the request capability.
429 * The address points to the PCI capability, of type PCI_CAP_ID_HT,
430 * which has a Hypertransport capability matching @ht_cap.
431 */
432int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
433{
434 int pos;
435
436 pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
437 if (pos)
438 pos = __pci_find_next_ht_cap(dev, pos, ht_cap);
439
440 return pos;
441}
442EXPORT_SYMBOL_GPL(pci_find_ht_capability);
443
444/**
445 * pci_find_parent_resource - return resource region of parent bus of given region
446 * @dev: PCI device structure contains resources to be searched
447 * @res: child resource record for which parent is sought
448 *
449 * For given resource region of given device, return the resource
450 * region of parent bus the given region is contained in or where
451 * it should be allocated from.
452 */
453struct resource *
454pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
455{
456 const struct pci_bus *bus = dev->bus;
457 int i;
458 struct resource *best = NULL, *r;
459
460 pci_bus_for_each_resource(bus, r, i) {
461 if (!r)
462 continue;
463 if (res->start && !(res->start >= r->start && res->end <= r->end))
464 continue; /* Not contained */
465 if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
466 continue; /* Wrong type */
467 if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH))
468 return r; /* Exact match */
469 /* We can't insert a non-prefetch resource inside a prefetchable parent .. */
470 if (r->flags & IORESOURCE_PREFETCH)
471 continue;
472 /* .. but we can put a prefetchable resource inside a non-prefetchable one */
473 if (!best)
474 best = r;
475 }
476 return best;
477}
478
479/**
480 * pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
481 * @dev: PCI device to have its BARs restored
482 *
483 * Restore the BAR values for a given device, so as to make it
484 * accessible by its driver.
485 */
486static void
487pci_restore_bars(struct pci_dev *dev)
488{
489 int i;
490
491 for (i = 0; i < PCI_BRIDGE_RESOURCES; i++)
492 pci_update_resource(dev, i);
493}
494
495static struct pci_platform_pm_ops *pci_platform_pm;
496
497int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
498{
499 if (!ops->is_manageable || !ops->set_state || !ops->choose_state
500 || !ops->sleep_wake || !ops->can_wakeup)
501 return -EINVAL;
502 pci_platform_pm = ops;
503 return 0;
504}
505
506static inline bool platform_pci_power_manageable(struct pci_dev *dev)
507{
508 return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
509}
510
511static inline int platform_pci_set_power_state(struct pci_dev *dev,
512 pci_power_t t)
513{
514 return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
515}
516
517static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
518{
519 return pci_platform_pm ?
520 pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
521}
522
523static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
524{
525 return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
526}
527
528static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
529{
530 return pci_platform_pm ?
531 pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
532}
533
534static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
535{
536 return pci_platform_pm ?
537 pci_platform_pm->run_wake(dev, enable) : -ENODEV;
538}
539
540/**
541 * pci_raw_set_power_state - Use PCI PM registers to set the power state of
542 * given PCI device
543 * @dev: PCI device to handle.
544 * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
545 *
546 * RETURN VALUE:
547 * -EINVAL if the requested state is invalid.
548 * -EIO if device does not support PCI PM or its PM capabilities register has a
549 * wrong version, or device doesn't support the requested state.
550 * 0 if device already is in the requested state.
551 * 0 if device's power state has been successfully changed.
552 */
553static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
554{
555 u16 pmcsr;
556 bool need_restore = false;
557
558 /* Check if we're already there */
559 if (dev->current_state == state)
560 return 0;
561
562 if (!dev->pm_cap)
563 return -EIO;
564
565 if (state < PCI_D0 || state > PCI_D3hot)
566 return -EINVAL;
567
568 /* Validate current state:
569 * Can enter D0 from any state, but if we can only go deeper
570 * to sleep if we're already in a low power state
571 */
572 if (state != PCI_D0 && dev->current_state <= PCI_D3cold
573 && dev->current_state > state) {
574 dev_err(&dev->dev, "invalid power transition "
575 "(from state %d to %d)\n", dev->current_state, state);
576 return -EINVAL;
577 }
578
579 /* check if this device supports the desired state */
580 if ((state == PCI_D1 && !dev->d1_support)
581 || (state == PCI_D2 && !dev->d2_support))
582 return -EIO;
583
584 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
585
586 /* If we're (effectively) in D3, force entire word to 0.
587 * This doesn't affect PME_Status, disables PME_En, and
588 * sets PowerState to 0.
589 */
590 switch (dev->current_state) {
591 case PCI_D0:
592 case PCI_D1:
593 case PCI_D2:
594 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
595 pmcsr |= state;
596 break;
597 case PCI_D3hot:
598 case PCI_D3cold:
599 case PCI_UNKNOWN: /* Boot-up */
600 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
601 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
602 need_restore = true;
603 /* Fall-through: force to D0 */
604 default:
605 pmcsr = 0;
606 break;
607 }
608
609 /* enter specified state */
610 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
611
612 /* Mandatory power management transition delays */
613 /* see PCI PM 1.1 5.6.1 table 18 */
614 if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
615 pci_dev_d3_sleep(dev);
616 else if (state == PCI_D2 || dev->current_state == PCI_D2)
617 udelay(PCI_PM_D2_DELAY);
618
619 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
620 dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
621 if (dev->current_state != state && printk_ratelimit())
622 dev_info(&dev->dev, "Refused to change power state, "
623 "currently in D%d\n", dev->current_state);
624
625 /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
626 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
627 * from D3hot to D0 _may_ perform an internal reset, thereby
628 * going to "D0 Uninitialized" rather than "D0 Initialized".
629 * For example, at least some versions of the 3c905B and the
630 * 3c556B exhibit this behaviour.
631 *
632 * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
633 * devices in a D3hot state at boot. Consequently, we need to
634 * restore at least the BARs so that the device will be
635 * accessible to its driver.
636 */
637 if (need_restore)
638 pci_restore_bars(dev);
639
640 if (dev->bus->self)
641 pcie_aspm_pm_state_change(dev->bus->self);
642
643 return 0;
644}
645
646/**
647 * pci_update_current_state - Read PCI power state of given device from its
648 * PCI PM registers and cache it
649 * @dev: PCI device to handle.
650 * @state: State to cache in case the device doesn't have the PM capability
651 */
652void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
653{
654 if (dev->pm_cap) {
655 u16 pmcsr;
656
657 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
658 dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
659 } else {
660 dev->current_state = state;
661 }
662}
663
664/**
665 * pci_platform_power_transition - Use platform to change device power state
666 * @dev: PCI device to handle.
667 * @state: State to put the device into.
668 */
669static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
670{
671 int error;
672
673 if (platform_pci_power_manageable(dev)) {
674 error = platform_pci_set_power_state(dev, state);
675 if (!error)
676 pci_update_current_state(dev, state);
677 /* Fall back to PCI_D0 if native PM is not supported */
678 if (!dev->pm_cap)
679 dev->current_state = PCI_D0;
680 } else {
681 error = -ENODEV;
682 /* Fall back to PCI_D0 if native PM is not supported */
683 if (!dev->pm_cap)
684 dev->current_state = PCI_D0;
685 }
686
687 return error;
688}
689
690/**
691 * __pci_start_power_transition - Start power transition of a PCI device
692 * @dev: PCI device to handle.
693 * @state: State to put the device into.
694 */
695static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
696{
697 if (state == PCI_D0)
698 pci_platform_power_transition(dev, PCI_D0);
699}
700
701/**
702 * __pci_complete_power_transition - Complete power transition of a PCI device
703 * @dev: PCI device to handle.
704 * @state: State to put the device into.
705 *
706 * This function should not be called directly by device drivers.
707 */
708int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
709{
710 return state >= PCI_D0 ?
711 pci_platform_power_transition(dev, state) : -EINVAL;
712}
713EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
714
715/**
716 * pci_set_power_state - Set the power state of a PCI device
717 * @dev: PCI device to handle.
718 * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
719 *
720 * Transition a device to a new power state, using the platform firmware and/or
721 * the device's PCI PM registers.
722 *
723 * RETURN VALUE:
724 * -EINVAL if the requested state is invalid.
725 * -EIO if device does not support PCI PM or its PM capabilities register has a
726 * wrong version, or device doesn't support the requested state.
727 * 0 if device already is in the requested state.
728 * 0 if device's power state has been successfully changed.
729 */
730int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
731{
732 int error;
733
734 /* bound the state we're entering */
735 if (state > PCI_D3hot)
736 state = PCI_D3hot;
737 else if (state < PCI_D0)
738 state = PCI_D0;
739 else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
740 /*
741 * If the device or the parent bridge do not support PCI PM,
742 * ignore the request if we're doing anything other than putting
743 * it into D0 (which would only happen on boot).
744 */
745 return 0;
746
747 __pci_start_power_transition(dev, state);
748
749 /* This device is quirked not to be put into D3, so
750 don't put it in D3 */
751 if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
752 return 0;
753
754 error = pci_raw_set_power_state(dev, state);
755
756 if (!__pci_complete_power_transition(dev, state))
757 error = 0;
758 /*
759 * When aspm_policy is "powersave" this call ensures
760 * that ASPM is configured.
761 */
762 if (!error && dev->bus->self)
763 pcie_aspm_powersave_config_link(dev->bus->self);
764
765 return error;
766}
767
768/**
769 * pci_choose_state - Choose the power state of a PCI device
770 * @dev: PCI device to be suspended
771 * @state: target sleep state for the whole system. This is the value
772 * that is passed to suspend() function.
773 *
774 * Returns PCI power state suitable for given device and given system
775 * message.
776 */
777
778pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
779{
780 pci_power_t ret;
781
782 if (!pci_find_capability(dev, PCI_CAP_ID_PM))
783 return PCI_D0;
784
785 ret = platform_pci_choose_state(dev);
786 if (ret != PCI_POWER_ERROR)
787 return ret;
788
789 switch (state.event) {
790 case PM_EVENT_ON:
791 return PCI_D0;
792 case PM_EVENT_FREEZE:
793 case PM_EVENT_PRETHAW:
794 /* REVISIT both freeze and pre-thaw "should" use D0 */
795 case PM_EVENT_SUSPEND:
796 case PM_EVENT_HIBERNATE:
797 return PCI_D3hot;
798 default:
799 dev_info(&dev->dev, "unrecognized suspend event %d\n",
800 state.event);
801 BUG();
802 }
803 return PCI_D0;
804}
805
806EXPORT_SYMBOL(pci_choose_state);
807
808#define PCI_EXP_SAVE_REGS 7
809
810#define pcie_cap_has_devctl(type, flags) 1
811#define pcie_cap_has_lnkctl(type, flags) \
812 ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
813 (type == PCI_EXP_TYPE_ROOT_PORT || \
814 type == PCI_EXP_TYPE_ENDPOINT || \
815 type == PCI_EXP_TYPE_LEG_END))
816#define pcie_cap_has_sltctl(type, flags) \
817 ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
818 ((type == PCI_EXP_TYPE_ROOT_PORT) || \
819 (type == PCI_EXP_TYPE_DOWNSTREAM && \
820 (flags & PCI_EXP_FLAGS_SLOT))))
821#define pcie_cap_has_rtctl(type, flags) \
822 ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
823 (type == PCI_EXP_TYPE_ROOT_PORT || \
824 type == PCI_EXP_TYPE_RC_EC))
825#define pcie_cap_has_devctl2(type, flags) \
826 ((flags & PCI_EXP_FLAGS_VERS) > 1)
827#define pcie_cap_has_lnkctl2(type, flags) \
828 ((flags & PCI_EXP_FLAGS_VERS) > 1)
829#define pcie_cap_has_sltctl2(type, flags) \
830 ((flags & PCI_EXP_FLAGS_VERS) > 1)
831
832static struct pci_cap_saved_state *pci_find_saved_cap(
833 struct pci_dev *pci_dev, char cap)
834{
835 struct pci_cap_saved_state *tmp;
836 struct hlist_node *pos;
837
838 hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) {
839 if (tmp->cap.cap_nr == cap)
840 return tmp;
841 }
842 return NULL;
843}
844
845static int pci_save_pcie_state(struct pci_dev *dev)
846{
847 int pos, i = 0;
848 struct pci_cap_saved_state *save_state;
849 u16 *cap;
850 u16 flags;
851
852 pos = pci_pcie_cap(dev);
853 if (!pos)
854 return 0;
855
856 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
857 if (!save_state) {
858 dev_err(&dev->dev, "buffer not found in %s\n", __func__);
859 return -ENOMEM;
860 }
861 cap = (u16 *)&save_state->cap.data[0];
862
863 pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
864
865 if (pcie_cap_has_devctl(dev->pcie_type, flags))
866 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
867 if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
868 pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
869 if (pcie_cap_has_sltctl(dev->pcie_type, flags))
870 pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
871 if (pcie_cap_has_rtctl(dev->pcie_type, flags))
872 pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
873 if (pcie_cap_has_devctl2(dev->pcie_type, flags))
874 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
875 if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
876 pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
877 if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
878 pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
879
880 return 0;
881}
882
883static void pci_restore_pcie_state(struct pci_dev *dev)
884{
885 int i = 0, pos;
886 struct pci_cap_saved_state *save_state;
887 u16 *cap;
888 u16 flags;
889
890 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
891 pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
892 if (!save_state || pos <= 0)
893 return;
894 cap = (u16 *)&save_state->cap.data[0];
895
896 pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
897
898 if (pcie_cap_has_devctl(dev->pcie_type, flags))
899 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
900 if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
901 pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
902 if (pcie_cap_has_sltctl(dev->pcie_type, flags))
903 pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
904 if (pcie_cap_has_rtctl(dev->pcie_type, flags))
905 pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
906 if (pcie_cap_has_devctl2(dev->pcie_type, flags))
907 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
908 if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
909 pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
910 if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
911 pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
912}
913
914
915static int pci_save_pcix_state(struct pci_dev *dev)
916{
917 int pos;
918 struct pci_cap_saved_state *save_state;
919
920 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
921 if (pos <= 0)
922 return 0;
923
924 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
925 if (!save_state) {
926 dev_err(&dev->dev, "buffer not found in %s\n", __func__);
927 return -ENOMEM;
928 }
929
930 pci_read_config_word(dev, pos + PCI_X_CMD,
931 (u16 *)save_state->cap.data);
932
933 return 0;
934}
935
936static void pci_restore_pcix_state(struct pci_dev *dev)
937{
938 int i = 0, pos;
939 struct pci_cap_saved_state *save_state;
940 u16 *cap;
941
942 save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
943 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
944 if (!save_state || pos <= 0)
945 return;
946 cap = (u16 *)&save_state->cap.data[0];
947
948 pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
949}
950
951
952/**
953 * pci_save_state - save the PCI configuration space of a device before suspending
954 * @dev: - PCI device that we're dealing with
955 */
956int
957pci_save_state(struct pci_dev *dev)
958{
959 int i;
960 /* XXX: 100% dword access ok here? */
961 for (i = 0; i < 16; i++)
962 pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]);
963 dev->state_saved = true;
964 if ((i = pci_save_pcie_state(dev)) != 0)
965 return i;
966 if ((i = pci_save_pcix_state(dev)) != 0)
967 return i;
968 return 0;
969}
970
971static void pci_restore_config_dword(struct pci_dev *pdev, int offset,
972 u32 saved_val, int retry)
973{
974 u32 val;
975
976 pci_read_config_dword(pdev, offset, &val);
977 if (val == saved_val)
978 return;
979
980 for (;;) {
981 dev_dbg(&pdev->dev, "restoring config space at offset "
982 "%#x (was %#x, writing %#x)\n", offset, val, saved_val);
983 pci_write_config_dword(pdev, offset, saved_val);
984 if (retry-- <= 0)
985 return;
986
987 pci_read_config_dword(pdev, offset, &val);
988 if (val == saved_val)
989 return;
990
991 mdelay(1);
992 }
993}
994
995static void pci_restore_config_space_range(struct pci_dev *pdev,
996 int start, int end, int retry)
997{
998 int index;
999
1000 for (index = end; index >= start; index--)
1001 pci_restore_config_dword(pdev, 4 * index,
1002 pdev->saved_config_space[index],
1003 retry);
1004}
1005
1006static void pci_restore_config_space(struct pci_dev *pdev)
1007{
1008 if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
1009 pci_restore_config_space_range(pdev, 10, 15, 0);
1010 /* Restore BARs before the command register. */
1011 pci_restore_config_space_range(pdev, 4, 9, 10);
1012 pci_restore_config_space_range(pdev, 0, 3, 0);
1013 } else {
1014 pci_restore_config_space_range(pdev, 0, 15, 0);
1015 }
1016}
1017
1018/**
1019 * pci_restore_state - Restore the saved state of a PCI device
1020 * @dev: - PCI device that we're dealing with
1021 */
1022void pci_restore_state(struct pci_dev *dev)
1023{
1024 if (!dev->state_saved)
1025 return;
1026
1027 /* PCI Express register must be restored first */
1028 pci_restore_pcie_state(dev);
1029 pci_restore_ats_state(dev);
1030
1031 pci_restore_config_space(dev);
1032
1033 pci_restore_pcix_state(dev);
1034 pci_restore_msi_state(dev);
1035 pci_restore_iov_state(dev);
1036
1037 dev->state_saved = false;
1038}
1039
1040struct pci_saved_state {
1041 u32 config_space[16];
1042 struct pci_cap_saved_data cap[0];
1043};
1044
1045/**
1046 * pci_store_saved_state - Allocate and return an opaque struct containing
1047 * the device saved state.
1048 * @dev: PCI device that we're dealing with
1049 *
1050 * Rerturn NULL if no state or error.
1051 */
1052struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev)
1053{
1054 struct pci_saved_state *state;
1055 struct pci_cap_saved_state *tmp;
1056 struct pci_cap_saved_data *cap;
1057 struct hlist_node *pos;
1058 size_t size;
1059
1060 if (!dev->state_saved)
1061 return NULL;
1062
1063 size = sizeof(*state) + sizeof(struct pci_cap_saved_data);
1064
1065 hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next)
1066 size += sizeof(struct pci_cap_saved_data) + tmp->cap.size;
1067
1068 state = kzalloc(size, GFP_KERNEL);
1069 if (!state)
1070 return NULL;
1071
1072 memcpy(state->config_space, dev->saved_config_space,
1073 sizeof(state->config_space));
1074
1075 cap = state->cap;
1076 hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next) {
1077 size_t len = sizeof(struct pci_cap_saved_data) + tmp->cap.size;
1078 memcpy(cap, &tmp->cap, len);
1079 cap = (struct pci_cap_saved_data *)((u8 *)cap + len);
1080 }
1081 /* Empty cap_save terminates list */
1082
1083 return state;
1084}
1085EXPORT_SYMBOL_GPL(pci_store_saved_state);
1086
1087/**
1088 * pci_load_saved_state - Reload the provided save state into struct pci_dev.
1089 * @dev: PCI device that we're dealing with
1090 * @state: Saved state returned from pci_store_saved_state()
1091 */
1092int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state)
1093{
1094 struct pci_cap_saved_data *cap;
1095
1096 dev->state_saved = false;
1097
1098 if (!state)
1099 return 0;
1100
1101 memcpy(dev->saved_config_space, state->config_space,
1102 sizeof(state->config_space));
1103
1104 cap = state->cap;
1105 while (cap->size) {
1106 struct pci_cap_saved_state *tmp;
1107
1108 tmp = pci_find_saved_cap(dev, cap->cap_nr);
1109 if (!tmp || tmp->cap.size != cap->size)
1110 return -EINVAL;
1111
1112 memcpy(tmp->cap.data, cap->data, tmp->cap.size);
1113 cap = (struct pci_cap_saved_data *)((u8 *)cap +
1114 sizeof(struct pci_cap_saved_data) + cap->size);
1115 }
1116
1117 dev->state_saved = true;
1118 return 0;
1119}
1120EXPORT_SYMBOL_GPL(pci_load_saved_state);
1121
1122/**
1123 * pci_load_and_free_saved_state - Reload the save state pointed to by state,
1124 * and free the memory allocated for it.
1125 * @dev: PCI device that we're dealing with
1126 * @state: Pointer to saved state returned from pci_store_saved_state()
1127 */
1128int pci_load_and_free_saved_state(struct pci_dev *dev,
1129 struct pci_saved_state **state)
1130{
1131 int ret = pci_load_saved_state(dev, *state);
1132 kfree(*state);
1133 *state = NULL;
1134 return ret;
1135}
1136EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state);
1137
1138static int do_pci_enable_device(struct pci_dev *dev, int bars)
1139{
1140 int err;
1141
1142 err = pci_set_power_state(dev, PCI_D0);
1143 if (err < 0 && err != -EIO)
1144 return err;
1145 err = pcibios_enable_device(dev, bars);
1146 if (err < 0)
1147 return err;
1148 pci_fixup_device(pci_fixup_enable, dev);
1149
1150 return 0;
1151}
1152
1153/**
1154 * pci_reenable_device - Resume abandoned device
1155 * @dev: PCI device to be resumed
1156 *
1157 * Note this function is a backend of pci_default_resume and is not supposed
1158 * to be called by normal code, write proper resume handler and use it instead.
1159 */
1160int pci_reenable_device(struct pci_dev *dev)
1161{
1162 if (pci_is_enabled(dev))
1163 return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
1164 return 0;
1165}
1166
1167static int __pci_enable_device_flags(struct pci_dev *dev,
1168 resource_size_t flags)
1169{
1170 int err;
1171 int i, bars = 0;
1172
1173 /*
1174 * Power state could be unknown at this point, either due to a fresh
1175 * boot or a device removal call. So get the current power state
1176 * so that things like MSI message writing will behave as expected
1177 * (e.g. if the device really is in D0 at enable time).
1178 */
1179 if (dev->pm_cap) {
1180 u16 pmcsr;
1181 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
1182 dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
1183 }
1184
1185 if (atomic_add_return(1, &dev->enable_cnt) > 1)
1186 return 0; /* already enabled */
1187
1188 /* only skip sriov related */
1189 for (i = 0; i <= PCI_ROM_RESOURCE; i++)
1190 if (dev->resource[i].flags & flags)
1191 bars |= (1 << i);
1192 for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++)
1193 if (dev->resource[i].flags & flags)
1194 bars |= (1 << i);
1195
1196 err = do_pci_enable_device(dev, bars);
1197 if (err < 0)
1198 atomic_dec(&dev->enable_cnt);
1199 return err;
1200}
1201
1202/**
1203 * pci_enable_device_io - Initialize a device for use with IO space
1204 * @dev: PCI device to be initialized
1205 *
1206 * Initialize device before it's used by a driver. Ask low-level code
1207 * to enable I/O resources. Wake up the device if it was suspended.
1208 * Beware, this function can fail.
1209 */
1210int pci_enable_device_io(struct pci_dev *dev)
1211{
1212 return __pci_enable_device_flags(dev, IORESOURCE_IO);
1213}
1214
1215/**
1216 * pci_enable_device_mem - Initialize a device for use with Memory space
1217 * @dev: PCI device to be initialized
1218 *
1219 * Initialize device before it's used by a driver. Ask low-level code
1220 * to enable Memory resources. Wake up the device if it was suspended.
1221 * Beware, this function can fail.
1222 */
1223int pci_enable_device_mem(struct pci_dev *dev)
1224{
1225 return __pci_enable_device_flags(dev, IORESOURCE_MEM);
1226}
1227
1228/**
1229 * pci_enable_device - Initialize device before it's used by a driver.
1230 * @dev: PCI device to be initialized
1231 *
1232 * Initialize device before it's used by a driver. Ask low-level code
1233 * to enable I/O and memory. Wake up the device if it was suspended.
1234 * Beware, this function can fail.
1235 *
1236 * Note we don't actually enable the device many times if we call
1237 * this function repeatedly (we just increment the count).
1238 */
1239int pci_enable_device(struct pci_dev *dev)
1240{
1241 return __pci_enable_device_flags(dev, IORESOURCE_MEM | IORESOURCE_IO);
1242}
1243
1244/*
1245 * Managed PCI resources. This manages device on/off, intx/msi/msix
1246 * on/off and BAR regions. pci_dev itself records msi/msix status, so
1247 * there's no need to track it separately. pci_devres is initialized
1248 * when a device is enabled using managed PCI device enable interface.
1249 */
1250struct pci_devres {
1251 unsigned int enabled:1;
1252 unsigned int pinned:1;
1253 unsigned int orig_intx:1;
1254 unsigned int restore_intx:1;
1255 u32 region_mask;
1256};
1257
1258static void pcim_release(struct device *gendev, void *res)
1259{
1260 struct pci_dev *dev = container_of(gendev, struct pci_dev, dev);
1261 struct pci_devres *this = res;
1262 int i;
1263
1264 if (dev->msi_enabled)
1265 pci_disable_msi(dev);
1266 if (dev->msix_enabled)
1267 pci_disable_msix(dev);
1268
1269 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
1270 if (this->region_mask & (1 << i))
1271 pci_release_region(dev, i);
1272
1273 if (this->restore_intx)
1274 pci_intx(dev, this->orig_intx);
1275
1276 if (this->enabled && !this->pinned)
1277 pci_disable_device(dev);
1278}
1279
1280static struct pci_devres * get_pci_dr(struct pci_dev *pdev)
1281{
1282 struct pci_devres *dr, *new_dr;
1283
1284 dr = devres_find(&pdev->dev, pcim_release, NULL, NULL);
1285 if (dr)
1286 return dr;
1287
1288 new_dr = devres_alloc(pcim_release, sizeof(*new_dr), GFP_KERNEL);
1289 if (!new_dr)
1290 return NULL;
1291 return devres_get(&pdev->dev, new_dr, NULL, NULL);
1292}
1293
1294static struct pci_devres * find_pci_dr(struct pci_dev *pdev)
1295{
1296 if (pci_is_managed(pdev))
1297 return devres_find(&pdev->dev, pcim_release, NULL, NULL);
1298 return NULL;
1299}
1300
1301/**
1302 * pcim_enable_device - Managed pci_enable_device()
1303 * @pdev: PCI device to be initialized
1304 *
1305 * Managed pci_enable_device().
1306 */
1307int pcim_enable_device(struct pci_dev *pdev)
1308{
1309 struct pci_devres *dr;
1310 int rc;
1311
1312 dr = get_pci_dr(pdev);
1313 if (unlikely(!dr))
1314 return -ENOMEM;
1315 if (dr->enabled)
1316 return 0;
1317
1318 rc = pci_enable_device(pdev);
1319 if (!rc) {
1320 pdev->is_managed = 1;
1321 dr->enabled = 1;
1322 }
1323 return rc;
1324}
1325
1326/**
1327 * pcim_pin_device - Pin managed PCI device
1328 * @pdev: PCI device to pin
1329 *
1330 * Pin managed PCI device @pdev. Pinned device won't be disabled on
1331 * driver detach. @pdev must have been enabled with
1332 * pcim_enable_device().
1333 */
1334void pcim_pin_device(struct pci_dev *pdev)
1335{
1336 struct pci_devres *dr;
1337
1338 dr = find_pci_dr(pdev);
1339 WARN_ON(!dr || !dr->enabled);
1340 if (dr)
1341 dr->pinned = 1;
1342}
1343
1344/**
1345 * pcibios_disable_device - disable arch specific PCI resources for device dev
1346 * @dev: the PCI device to disable
1347 *
1348 * Disables architecture specific PCI resources for the device. This
1349 * is the default implementation. Architecture implementations can
1350 * override this.
1351 */
1352void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
1353
1354static void do_pci_disable_device(struct pci_dev *dev)
1355{
1356 u16 pci_command;
1357
1358 pci_read_config_word(dev, PCI_COMMAND, &pci_command);
1359 if (pci_command & PCI_COMMAND_MASTER) {
1360 pci_command &= ~PCI_COMMAND_MASTER;
1361 pci_write_config_word(dev, PCI_COMMAND, pci_command);
1362 }
1363
1364 pcibios_disable_device(dev);
1365}
1366
1367/**
1368 * pci_disable_enabled_device - Disable device without updating enable_cnt
1369 * @dev: PCI device to disable
1370 *
1371 * NOTE: This function is a backend of PCI power management routines and is
1372 * not supposed to be called drivers.
1373 */
1374void pci_disable_enabled_device(struct pci_dev *dev)
1375{
1376 if (pci_is_enabled(dev))
1377 do_pci_disable_device(dev);
1378}
1379
1380/**
1381 * pci_disable_device - Disable PCI device after use
1382 * @dev: PCI device to be disabled
1383 *
1384 * Signal to the system that the PCI device is not in use by the system
1385 * anymore. This only involves disabling PCI bus-mastering, if active.
1386 *
1387 * Note we don't actually disable the device until all callers of
1388 * pci_enable_device() have called pci_disable_device().
1389 */
1390void
1391pci_disable_device(struct pci_dev *dev)
1392{
1393 struct pci_devres *dr;
1394
1395 dr = find_pci_dr(dev);
1396 if (dr)
1397 dr->enabled = 0;
1398
1399 if (atomic_sub_return(1, &dev->enable_cnt) != 0)
1400 return;
1401
1402 do_pci_disable_device(dev);
1403
1404 dev->is_busmaster = 0;
1405}
1406
1407/**
1408 * pcibios_set_pcie_reset_state - set reset state for device dev
1409 * @dev: the PCIe device reset
1410 * @state: Reset state to enter into
1411 *
1412 *
1413 * Sets the PCIe reset state for the device. This is the default
1414 * implementation. Architecture implementations can override this.
1415 */
1416int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
1417 enum pcie_reset_state state)
1418{
1419 return -EINVAL;
1420}
1421
1422/**
1423 * pci_set_pcie_reset_state - set reset state for device dev
1424 * @dev: the PCIe device reset
1425 * @state: Reset state to enter into
1426 *
1427 *
1428 * Sets the PCI reset state for the device.
1429 */
1430int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
1431{
1432 return pcibios_set_pcie_reset_state(dev, state);
1433}
1434
1435/**
1436 * pci_check_pme_status - Check if given device has generated PME.
1437 * @dev: Device to check.
1438 *
1439 * Check the PME status of the device and if set, clear it and clear PME enable
1440 * (if set). Return 'true' if PME status and PME enable were both set or
1441 * 'false' otherwise.
1442 */
1443bool pci_check_pme_status(struct pci_dev *dev)
1444{
1445 int pmcsr_pos;
1446 u16 pmcsr;
1447 bool ret = false;
1448
1449 if (!dev->pm_cap)
1450 return false;
1451
1452 pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
1453 pci_read_config_word(dev, pmcsr_pos, &pmcsr);
1454 if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
1455 return false;
1456
1457 /* Clear PME status. */
1458 pmcsr |= PCI_PM_CTRL_PME_STATUS;
1459 if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
1460 /* Disable PME to avoid interrupt flood. */
1461 pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
1462 ret = true;
1463 }
1464
1465 pci_write_config_word(dev, pmcsr_pos, pmcsr);
1466
1467 return ret;
1468}
1469
1470/**
1471 * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
1472 * @dev: Device to handle.
1473 * @pme_poll_reset: Whether or not to reset the device's pme_poll flag.
1474 *
1475 * Check if @dev has generated PME and queue a resume request for it in that
1476 * case.
1477 */
1478static int pci_pme_wakeup(struct pci_dev *dev, void *pme_poll_reset)
1479{
1480 if (pme_poll_reset && dev->pme_poll)
1481 dev->pme_poll = false;
1482
1483 if (pci_check_pme_status(dev)) {
1484 pci_wakeup_event(dev);
1485 pm_request_resume(&dev->dev);
1486 }
1487 return 0;
1488}
1489
1490/**
1491 * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
1492 * @bus: Top bus of the subtree to walk.
1493 */
1494void pci_pme_wakeup_bus(struct pci_bus *bus)
1495{
1496 if (bus)
1497 pci_walk_bus(bus, pci_pme_wakeup, (void *)true);
1498}
1499
1500/**
1501 * pci_pme_capable - check the capability of PCI device to generate PME#
1502 * @dev: PCI device to handle.
1503 * @state: PCI state from which device will issue PME#.
1504 */
1505bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
1506{
1507 if (!dev->pm_cap)
1508 return false;
1509
1510 return !!(dev->pme_support & (1 << state));
1511}
1512
1513static void pci_pme_list_scan(struct work_struct *work)
1514{
1515 struct pci_pme_device *pme_dev, *n;
1516
1517 mutex_lock(&pci_pme_list_mutex);
1518 if (!list_empty(&pci_pme_list)) {
1519 list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
1520 if (pme_dev->dev->pme_poll) {
1521 pci_pme_wakeup(pme_dev->dev, NULL);
1522 } else {
1523 list_del(&pme_dev->list);
1524 kfree(pme_dev);
1525 }
1526 }
1527 if (!list_empty(&pci_pme_list))
1528 schedule_delayed_work(&pci_pme_work,
1529 msecs_to_jiffies(PME_TIMEOUT));
1530 }
1531 mutex_unlock(&pci_pme_list_mutex);
1532}
1533
1534/**
1535 * pci_pme_active - enable or disable PCI device's PME# function
1536 * @dev: PCI device to handle.
1537 * @enable: 'true' to enable PME# generation; 'false' to disable it.
1538 *
1539 * The caller must verify that the device is capable of generating PME# before
1540 * calling this function with @enable equal to 'true'.
1541 */
1542void pci_pme_active(struct pci_dev *dev, bool enable)
1543{
1544 u16 pmcsr;
1545
1546 if (!dev->pm_cap)
1547 return;
1548
1549 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
1550 /* Clear PME_Status by writing 1 to it and enable PME# */
1551 pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
1552 if (!enable)
1553 pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
1554
1555 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
1556
1557 /* PCI (as opposed to PCIe) PME requires that the device have
1558 its PME# line hooked up correctly. Not all hardware vendors
1559 do this, so the PME never gets delivered and the device
1560 remains asleep. The easiest way around this is to
1561 periodically walk the list of suspended devices and check
1562 whether any have their PME flag set. The assumption is that
1563 we'll wake up often enough anyway that this won't be a huge
1564 hit, and the power savings from the devices will still be a
1565 win. */
1566
1567 if (dev->pme_poll) {
1568 struct pci_pme_device *pme_dev;
1569 if (enable) {
1570 pme_dev = kmalloc(sizeof(struct pci_pme_device),
1571 GFP_KERNEL);
1572 if (!pme_dev)
1573 goto out;
1574 pme_dev->dev = dev;
1575 mutex_lock(&pci_pme_list_mutex);
1576 list_add(&pme_dev->list, &pci_pme_list);
1577 if (list_is_singular(&pci_pme_list))
1578 schedule_delayed_work(&pci_pme_work,
1579 msecs_to_jiffies(PME_TIMEOUT));
1580 mutex_unlock(&pci_pme_list_mutex);
1581 } else {
1582 mutex_lock(&pci_pme_list_mutex);
1583 list_for_each_entry(pme_dev, &pci_pme_list, list) {
1584 if (pme_dev->dev == dev) {
1585 list_del(&pme_dev->list);
1586 kfree(pme_dev);
1587 break;
1588 }
1589 }
1590 mutex_unlock(&pci_pme_list_mutex);
1591 }
1592 }
1593
1594out:
1595 dev_dbg(&dev->dev, "PME# %s\n", enable ? "enabled" : "disabled");
1596}
1597
1598/**
1599 * __pci_enable_wake - enable PCI device as wakeup event source
1600 * @dev: PCI device affected
1601 * @state: PCI state from which device will issue wakeup events
1602 * @runtime: True if the events are to be generated at run time
1603 * @enable: True to enable event generation; false to disable
1604 *
1605 * This enables the device as a wakeup event source, or disables it.
1606 * When such events involves platform-specific hooks, those hooks are
1607 * called automatically by this routine.
1608 *
1609 * Devices with legacy power management (no standard PCI PM capabilities)
1610 * always require such platform hooks.
1611 *
1612 * RETURN VALUE:
1613 * 0 is returned on success
1614 * -EINVAL is returned if device is not supposed to wake up the system
1615 * Error code depending on the platform is returned if both the platform and
1616 * the native mechanism fail to enable the generation of wake-up events
1617 */
1618int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
1619 bool runtime, bool enable)
1620{
1621 int ret = 0;
1622
1623 if (enable && !runtime && !device_may_wakeup(&dev->dev))
1624 return -EINVAL;
1625
1626 /* Don't do the same thing twice in a row for one device. */
1627 if (!!enable == !!dev->wakeup_prepared)
1628 return 0;
1629
1630 /*
1631 * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
1632 * Anderson we should be doing PME# wake enable followed by ACPI wake
1633 * enable. To disable wake-up we call the platform first, for symmetry.
1634 */
1635
1636 if (enable) {
1637 int error;
1638
1639 if (pci_pme_capable(dev, state))
1640 pci_pme_active(dev, true);
1641 else
1642 ret = 1;
1643 error = runtime ? platform_pci_run_wake(dev, true) :
1644 platform_pci_sleep_wake(dev, true);
1645 if (ret)
1646 ret = error;
1647 if (!ret)
1648 dev->wakeup_prepared = true;
1649 } else {
1650 if (runtime)
1651 platform_pci_run_wake(dev, false);
1652 else
1653 platform_pci_sleep_wake(dev, false);
1654 pci_pme_active(dev, false);
1655 dev->wakeup_prepared = false;
1656 }
1657
1658 return ret;
1659}
1660EXPORT_SYMBOL(__pci_enable_wake);
1661
1662/**
1663 * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
1664 * @dev: PCI device to prepare
1665 * @enable: True to enable wake-up event generation; false to disable
1666 *
1667 * Many drivers want the device to wake up the system from D3_hot or D3_cold
1668 * and this function allows them to set that up cleanly - pci_enable_wake()
1669 * should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
1670 * ordering constraints.
1671 *
1672 * This function only returns error code if the device is not capable of
1673 * generating PME# from both D3_hot and D3_cold, and the platform is unable to
1674 * enable wake-up power for it.
1675 */
1676int pci_wake_from_d3(struct pci_dev *dev, bool enable)
1677{
1678 return pci_pme_capable(dev, PCI_D3cold) ?
1679 pci_enable_wake(dev, PCI_D3cold, enable) :
1680 pci_enable_wake(dev, PCI_D3hot, enable);
1681}
1682
1683/**
1684 * pci_target_state - find an appropriate low power state for a given PCI dev
1685 * @dev: PCI device
1686 *
1687 * Use underlying platform code to find a supported low power state for @dev.
1688 * If the platform can't manage @dev, return the deepest state from which it
1689 * can generate wake events, based on any available PME info.
1690 */
1691pci_power_t pci_target_state(struct pci_dev *dev)
1692{
1693 pci_power_t target_state = PCI_D3hot;
1694
1695 if (platform_pci_power_manageable(dev)) {
1696 /*
1697 * Call the platform to choose the target state of the device
1698 * and enable wake-up from this state if supported.
1699 */
1700 pci_power_t state = platform_pci_choose_state(dev);
1701
1702 switch (state) {
1703 case PCI_POWER_ERROR:
1704 case PCI_UNKNOWN:
1705 break;
1706 case PCI_D1:
1707 case PCI_D2:
1708 if (pci_no_d1d2(dev))
1709 break;
1710 default:
1711 target_state = state;
1712 }
1713 } else if (!dev->pm_cap) {
1714 target_state = PCI_D0;
1715 } else if (device_may_wakeup(&dev->dev)) {
1716 /*
1717 * Find the deepest state from which the device can generate
1718 * wake-up events, make it the target state and enable device
1719 * to generate PME#.
1720 */
1721 if (dev->pme_support) {
1722 while (target_state
1723 && !(dev->pme_support & (1 << target_state)))
1724 target_state--;
1725 }
1726 }
1727
1728 return target_state;
1729}
1730
1731/**
1732 * pci_prepare_to_sleep - prepare PCI device for system-wide transition into a sleep state
1733 * @dev: Device to handle.
1734 *
1735 * Choose the power state appropriate for the device depending on whether
1736 * it can wake up the system and/or is power manageable by the platform
1737 * (PCI_D3hot is the default) and put the device into that state.
1738 */
1739int pci_prepare_to_sleep(struct pci_dev *dev)
1740{
1741 pci_power_t target_state = pci_target_state(dev);
1742 int error;
1743
1744 if (target_state == PCI_POWER_ERROR)
1745 return -EIO;
1746
1747 pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
1748
1749 error = pci_set_power_state(dev, target_state);
1750
1751 if (error)
1752 pci_enable_wake(dev, target_state, false);
1753
1754 return error;
1755}
1756
1757/**
1758 * pci_back_from_sleep - turn PCI device on during system-wide transition into working state
1759 * @dev: Device to handle.
1760 *
1761 * Disable device's system wake-up capability and put it into D0.
1762 */
1763int pci_back_from_sleep(struct pci_dev *dev)
1764{
1765 pci_enable_wake(dev, PCI_D0, false);
1766 return pci_set_power_state(dev, PCI_D0);
1767}
1768
1769/**
1770 * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
1771 * @dev: PCI device being suspended.
1772 *
1773 * Prepare @dev to generate wake-up events at run time and put it into a low
1774 * power state.
1775 */
1776int pci_finish_runtime_suspend(struct pci_dev *dev)
1777{
1778 pci_power_t target_state = pci_target_state(dev);
1779 int error;
1780
1781 if (target_state == PCI_POWER_ERROR)
1782 return -EIO;
1783
1784 __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
1785
1786 error = pci_set_power_state(dev, target_state);
1787
1788 if (error)
1789 __pci_enable_wake(dev, target_state, true, false);
1790
1791 return error;
1792}
1793
1794/**
1795 * pci_dev_run_wake - Check if device can generate run-time wake-up events.
1796 * @dev: Device to check.
1797 *
1798 * Return true if the device itself is cabable of generating wake-up events
1799 * (through the platform or using the native PCIe PME) or if the device supports
1800 * PME and one of its upstream bridges can generate wake-up events.
1801 */
1802bool pci_dev_run_wake(struct pci_dev *dev)
1803{
1804 struct pci_bus *bus = dev->bus;
1805
1806 if (device_run_wake(&dev->dev))
1807 return true;
1808
1809 if (!dev->pme_support)
1810 return false;
1811
1812 while (bus->parent) {
1813 struct pci_dev *bridge = bus->self;
1814
1815 if (device_run_wake(&bridge->dev))
1816 return true;
1817
1818 bus = bus->parent;
1819 }
1820
1821 /* We have reached the root bus. */
1822 if (bus->bridge)
1823 return device_run_wake(bus->bridge);
1824
1825 return false;
1826}
1827EXPORT_SYMBOL_GPL(pci_dev_run_wake);
1828
1829/**
1830 * pci_pm_init - Initialize PM functions of given PCI device
1831 * @dev: PCI device to handle.
1832 */
1833void pci_pm_init(struct pci_dev *dev)
1834{
1835 int pm;
1836 u16 pmc;
1837
1838 pm_runtime_forbid(&dev->dev);
1839 device_enable_async_suspend(&dev->dev);
1840 dev->wakeup_prepared = false;
1841
1842 dev->pm_cap = 0;
1843
1844 /* find PCI PM capability in list */
1845 pm = pci_find_capability(dev, PCI_CAP_ID_PM);
1846 if (!pm)
1847 return;
1848 /* Check device's ability to generate PME# */
1849 pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
1850
1851 if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
1852 dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
1853 pmc & PCI_PM_CAP_VER_MASK);
1854 return;
1855 }
1856
1857 dev->pm_cap = pm;
1858 dev->d3_delay = PCI_PM_D3_WAIT;
1859
1860 dev->d1_support = false;
1861 dev->d2_support = false;
1862 if (!pci_no_d1d2(dev)) {
1863 if (pmc & PCI_PM_CAP_D1)
1864 dev->d1_support = true;
1865 if (pmc & PCI_PM_CAP_D2)
1866 dev->d2_support = true;
1867
1868 if (dev->d1_support || dev->d2_support)
1869 dev_printk(KERN_DEBUG, &dev->dev, "supports%s%s\n",
1870 dev->d1_support ? " D1" : "",
1871 dev->d2_support ? " D2" : "");
1872 }
1873
1874 pmc &= PCI_PM_CAP_PME_MASK;
1875 if (pmc) {
1876 dev_printk(KERN_DEBUG, &dev->dev,
1877 "PME# supported from%s%s%s%s%s\n",
1878 (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
1879 (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
1880 (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
1881 (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
1882 (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
1883 dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
1884 dev->pme_poll = true;
1885 /*
1886 * Make device's PM flags reflect the wake-up capability, but
1887 * let the user space enable it to wake up the system as needed.
1888 */
1889 device_set_wakeup_capable(&dev->dev, true);
1890 /* Disable the PME# generation functionality */
1891 pci_pme_active(dev, false);
1892 } else {
1893 dev->pme_support = 0;
1894 }
1895}
1896
1897/**
1898 * platform_pci_wakeup_init - init platform wakeup if present
1899 * @dev: PCI device
1900 *
1901 * Some devices don't have PCI PM caps but can still generate wakeup
1902 * events through platform methods (like ACPI events). If @dev supports
1903 * platform wakeup events, set the device flag to indicate as much. This
1904 * may be redundant if the device also supports PCI PM caps, but double
1905 * initialization should be safe in that case.
1906 */
1907void platform_pci_wakeup_init(struct pci_dev *dev)
1908{
1909 if (!platform_pci_can_wakeup(dev))
1910 return;
1911
1912 device_set_wakeup_capable(&dev->dev, true);
1913 platform_pci_sleep_wake(dev, false);
1914}
1915
1916static void pci_add_saved_cap(struct pci_dev *pci_dev,
1917 struct pci_cap_saved_state *new_cap)
1918{
1919 hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space);
1920}
1921
1922/**
1923 * pci_add_save_buffer - allocate buffer for saving given capability registers
1924 * @dev: the PCI device
1925 * @cap: the capability to allocate the buffer for
1926 * @size: requested size of the buffer
1927 */
1928static int pci_add_cap_save_buffer(
1929 struct pci_dev *dev, char cap, unsigned int size)
1930{
1931 int pos;
1932 struct pci_cap_saved_state *save_state;
1933
1934 pos = pci_find_capability(dev, cap);
1935 if (pos <= 0)
1936 return 0;
1937
1938 save_state = kzalloc(sizeof(*save_state) + size, GFP_KERNEL);
1939 if (!save_state)
1940 return -ENOMEM;
1941
1942 save_state->cap.cap_nr = cap;
1943 save_state->cap.size = size;
1944 pci_add_saved_cap(dev, save_state);
1945
1946 return 0;
1947}
1948
1949/**
1950 * pci_allocate_cap_save_buffers - allocate buffers for saving capabilities
1951 * @dev: the PCI device
1952 */
1953void pci_allocate_cap_save_buffers(struct pci_dev *dev)
1954{
1955 int error;
1956
1957 error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP,
1958 PCI_EXP_SAVE_REGS * sizeof(u16));
1959 if (error)
1960 dev_err(&dev->dev,
1961 "unable to preallocate PCI Express save buffer\n");
1962
1963 error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_PCIX, sizeof(u16));
1964 if (error)
1965 dev_err(&dev->dev,
1966 "unable to preallocate PCI-X save buffer\n");
1967}
1968
1969void pci_free_cap_save_buffers(struct pci_dev *dev)
1970{
1971 struct pci_cap_saved_state *tmp;
1972 struct hlist_node *pos, *n;
1973
1974 hlist_for_each_entry_safe(tmp, pos, n, &dev->saved_cap_space, next)
1975 kfree(tmp);
1976}
1977
1978/**
1979 * pci_enable_ari - enable ARI forwarding if hardware support it
1980 * @dev: the PCI device
1981 */
1982void pci_enable_ari(struct pci_dev *dev)
1983{
1984 int pos;
1985 u32 cap;
1986 u16 flags, ctrl;
1987 struct pci_dev *bridge;
1988
1989 if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn)
1990 return;
1991
1992 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
1993 if (!pos)
1994 return;
1995
1996 bridge = dev->bus->self;
1997 if (!bridge || !pci_is_pcie(bridge))
1998 return;
1999
2000 pos = pci_pcie_cap(bridge);
2001 if (!pos)
2002 return;
2003
2004 /* ARI is a PCIe v2 feature */
2005 pci_read_config_word(bridge, pos + PCI_EXP_FLAGS, &flags);
2006 if ((flags & PCI_EXP_FLAGS_VERS) < 2)
2007 return;
2008
2009 pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
2010 if (!(cap & PCI_EXP_DEVCAP2_ARI))
2011 return;
2012
2013 pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl);
2014 ctrl |= PCI_EXP_DEVCTL2_ARI;
2015 pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl);
2016
2017 bridge->ari_enabled = 1;
2018}
2019
2020/**
2021 * pci_enable_ido - enable ID-based ordering on a device
2022 * @dev: the PCI device
2023 * @type: which types of IDO to enable
2024 *
2025 * Enable ID-based ordering on @dev. @type can contain the bits
2026 * %PCI_EXP_IDO_REQUEST and/or %PCI_EXP_IDO_COMPLETION to indicate
2027 * which types of transactions are allowed to be re-ordered.
2028 */
2029void pci_enable_ido(struct pci_dev *dev, unsigned long type)
2030{
2031 int pos;
2032 u16 ctrl;
2033
2034 pos = pci_pcie_cap(dev);
2035 if (!pos)
2036 return;
2037
2038 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2039 if (type & PCI_EXP_IDO_REQUEST)
2040 ctrl |= PCI_EXP_IDO_REQ_EN;
2041 if (type & PCI_EXP_IDO_COMPLETION)
2042 ctrl |= PCI_EXP_IDO_CMP_EN;
2043 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2044}
2045EXPORT_SYMBOL(pci_enable_ido);
2046
2047/**
2048 * pci_disable_ido - disable ID-based ordering on a device
2049 * @dev: the PCI device
2050 * @type: which types of IDO to disable
2051 */
2052void pci_disable_ido(struct pci_dev *dev, unsigned long type)
2053{
2054 int pos;
2055 u16 ctrl;
2056
2057 if (!pci_is_pcie(dev))
2058 return;
2059
2060 pos = pci_pcie_cap(dev);
2061 if (!pos)
2062 return;
2063
2064 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2065 if (type & PCI_EXP_IDO_REQUEST)
2066 ctrl &= ~PCI_EXP_IDO_REQ_EN;
2067 if (type & PCI_EXP_IDO_COMPLETION)
2068 ctrl &= ~PCI_EXP_IDO_CMP_EN;
2069 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2070}
2071EXPORT_SYMBOL(pci_disable_ido);
2072
2073/**
2074 * pci_enable_obff - enable optimized buffer flush/fill
2075 * @dev: PCI device
2076 * @type: type of signaling to use
2077 *
2078 * Try to enable @type OBFF signaling on @dev. It will try using WAKE#
2079 * signaling if possible, falling back to message signaling only if
2080 * WAKE# isn't supported. @type should indicate whether the PCIe link
2081 * be brought out of L0s or L1 to send the message. It should be either
2082 * %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
2083 *
2084 * If your device can benefit from receiving all messages, even at the
2085 * power cost of bringing the link back up from a low power state, use
2086 * %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
2087 * preferred type).
2088 *
2089 * RETURNS:
2090 * Zero on success, appropriate error number on failure.
2091 */
2092int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
2093{
2094 int pos;
2095 u32 cap;
2096 u16 ctrl;
2097 int ret;
2098
2099 if (!pci_is_pcie(dev))
2100 return -ENOTSUPP;
2101
2102 pos = pci_pcie_cap(dev);
2103 if (!pos)
2104 return -ENOTSUPP;
2105
2106 pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
2107 if (!(cap & PCI_EXP_OBFF_MASK))
2108 return -ENOTSUPP; /* no OBFF support at all */
2109
2110 /* Make sure the topology supports OBFF as well */
2111 if (dev->bus) {
2112 ret = pci_enable_obff(dev->bus->self, type);
2113 if (ret)
2114 return ret;
2115 }
2116
2117 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2118 if (cap & PCI_EXP_OBFF_WAKE)
2119 ctrl |= PCI_EXP_OBFF_WAKE_EN;
2120 else {
2121 switch (type) {
2122 case PCI_EXP_OBFF_SIGNAL_L0:
2123 if (!(ctrl & PCI_EXP_OBFF_WAKE_EN))
2124 ctrl |= PCI_EXP_OBFF_MSGA_EN;
2125 break;
2126 case PCI_EXP_OBFF_SIGNAL_ALWAYS:
2127 ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
2128 ctrl |= PCI_EXP_OBFF_MSGB_EN;
2129 break;
2130 default:
2131 WARN(1, "bad OBFF signal type\n");
2132 return -ENOTSUPP;
2133 }
2134 }
2135 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2136
2137 return 0;
2138}
2139EXPORT_SYMBOL(pci_enable_obff);
2140
2141/**
2142 * pci_disable_obff - disable optimized buffer flush/fill
2143 * @dev: PCI device
2144 *
2145 * Disable OBFF on @dev.
2146 */
2147void pci_disable_obff(struct pci_dev *dev)
2148{
2149 int pos;
2150 u16 ctrl;
2151
2152 if (!pci_is_pcie(dev))
2153 return;
2154
2155 pos = pci_pcie_cap(dev);
2156 if (!pos)
2157 return;
2158
2159 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2160 ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
2161 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2162}
2163EXPORT_SYMBOL(pci_disable_obff);
2164
2165/**
2166 * pci_ltr_supported - check whether a device supports LTR
2167 * @dev: PCI device
2168 *
2169 * RETURNS:
2170 * True if @dev supports latency tolerance reporting, false otherwise.
2171 */
2172bool pci_ltr_supported(struct pci_dev *dev)
2173{
2174 int pos;
2175 u32 cap;
2176
2177 if (!pci_is_pcie(dev))
2178 return false;
2179
2180 pos = pci_pcie_cap(dev);
2181 if (!pos)
2182 return false;
2183
2184 pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
2185
2186 return cap & PCI_EXP_DEVCAP2_LTR;
2187}
2188EXPORT_SYMBOL(pci_ltr_supported);
2189
2190/**
2191 * pci_enable_ltr - enable latency tolerance reporting
2192 * @dev: PCI device
2193 *
2194 * Enable LTR on @dev if possible, which means enabling it first on
2195 * upstream ports.
2196 *
2197 * RETURNS:
2198 * Zero on success, errno on failure.
2199 */
2200int pci_enable_ltr(struct pci_dev *dev)
2201{
2202 int pos;
2203 u16 ctrl;
2204 int ret;
2205
2206 if (!pci_ltr_supported(dev))
2207 return -ENOTSUPP;
2208
2209 pos = pci_pcie_cap(dev);
2210 if (!pos)
2211 return -ENOTSUPP;
2212
2213 /* Only primary function can enable/disable LTR */
2214 if (PCI_FUNC(dev->devfn) != 0)
2215 return -EINVAL;
2216
2217 /* Enable upstream ports first */
2218 if (dev->bus) {
2219 ret = pci_enable_ltr(dev->bus->self);
2220 if (ret)
2221 return ret;
2222 }
2223
2224 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2225 ctrl |= PCI_EXP_LTR_EN;
2226 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2227
2228 return 0;
2229}
2230EXPORT_SYMBOL(pci_enable_ltr);
2231
2232/**
2233 * pci_disable_ltr - disable latency tolerance reporting
2234 * @dev: PCI device
2235 */
2236void pci_disable_ltr(struct pci_dev *dev)
2237{
2238 int pos;
2239 u16 ctrl;
2240
2241 if (!pci_ltr_supported(dev))
2242 return;
2243
2244 pos = pci_pcie_cap(dev);
2245 if (!pos)
2246 return;
2247
2248 /* Only primary function can enable/disable LTR */
2249 if (PCI_FUNC(dev->devfn) != 0)
2250 return;
2251
2252 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
2253 ctrl &= ~PCI_EXP_LTR_EN;
2254 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
2255}
2256EXPORT_SYMBOL(pci_disable_ltr);
2257
2258static int __pci_ltr_scale(int *val)
2259{
2260 int scale = 0;
2261
2262 while (*val > 1023) {
2263 *val = (*val + 31) / 32;
2264 scale++;
2265 }
2266 return scale;
2267}
2268
2269/**
2270 * pci_set_ltr - set LTR latency values
2271 * @dev: PCI device
2272 * @snoop_lat_ns: snoop latency in nanoseconds
2273 * @nosnoop_lat_ns: nosnoop latency in nanoseconds
2274 *
2275 * Figure out the scale and set the LTR values accordingly.
2276 */
2277int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns)
2278{
2279 int pos, ret, snoop_scale, nosnoop_scale;
2280 u16 val;
2281
2282 if (!pci_ltr_supported(dev))
2283 return -ENOTSUPP;
2284
2285 snoop_scale = __pci_ltr_scale(&snoop_lat_ns);
2286 nosnoop_scale = __pci_ltr_scale(&nosnoop_lat_ns);
2287
2288 if (snoop_lat_ns > PCI_LTR_VALUE_MASK ||
2289 nosnoop_lat_ns > PCI_LTR_VALUE_MASK)
2290 return -EINVAL;
2291
2292 if ((snoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)) ||
2293 (nosnoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)))
2294 return -EINVAL;
2295
2296 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR);
2297 if (!pos)
2298 return -ENOTSUPP;
2299
2300 val = (snoop_scale << PCI_LTR_SCALE_SHIFT) | snoop_lat_ns;
2301 ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_SNOOP_LAT, val);
2302 if (ret != 4)
2303 return -EIO;
2304
2305 val = (nosnoop_scale << PCI_LTR_SCALE_SHIFT) | nosnoop_lat_ns;
2306 ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_NOSNOOP_LAT, val);
2307 if (ret != 4)
2308 return -EIO;
2309
2310 return 0;
2311}
2312EXPORT_SYMBOL(pci_set_ltr);
2313
2314static int pci_acs_enable;
2315
2316/**
2317 * pci_request_acs - ask for ACS to be enabled if supported
2318 */
2319void pci_request_acs(void)
2320{
2321 pci_acs_enable = 1;
2322}
2323
2324/**
2325 * pci_enable_acs - enable ACS if hardware support it
2326 * @dev: the PCI device
2327 */
2328void pci_enable_acs(struct pci_dev *dev)
2329{
2330 int pos;
2331 u16 cap;
2332 u16 ctrl;
2333
2334 if (!pci_acs_enable)
2335 return;
2336
2337 if (!pci_is_pcie(dev))
2338 return;
2339
2340 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
2341 if (!pos)
2342 return;
2343
2344 pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
2345 pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
2346
2347 /* Source Validation */
2348 ctrl |= (cap & PCI_ACS_SV);
2349
2350 /* P2P Request Redirect */
2351 ctrl |= (cap & PCI_ACS_RR);
2352
2353 /* P2P Completion Redirect */
2354 ctrl |= (cap & PCI_ACS_CR);
2355
2356 /* Upstream Forwarding */
2357 ctrl |= (cap & PCI_ACS_UF);
2358
2359 pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
2360}
2361
2362/**
2363 * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
2364 * @dev: the PCI device
2365 * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
2366 *
2367 * Perform INTx swizzling for a device behind one level of bridge. This is
2368 * required by section 9.1 of the PCI-to-PCI bridge specification for devices
2369 * behind bridges on add-in cards. For devices with ARI enabled, the slot
2370 * number is always 0 (see the Implementation Note in section 2.2.8.1 of
2371 * the PCI Express Base Specification, Revision 2.1)
2372 */
2373u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin)
2374{
2375 int slot;
2376
2377 if (pci_ari_enabled(dev->bus))
2378 slot = 0;
2379 else
2380 slot = PCI_SLOT(dev->devfn);
2381
2382 return (((pin - 1) + slot) % 4) + 1;
2383}
2384
2385int
2386pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
2387{
2388 u8 pin;
2389
2390 pin = dev->pin;
2391 if (!pin)
2392 return -1;
2393
2394 while (!pci_is_root_bus(dev->bus)) {
2395 pin = pci_swizzle_interrupt_pin(dev, pin);
2396 dev = dev->bus->self;
2397 }
2398 *bridge = dev;
2399 return pin;
2400}
2401
2402/**
2403 * pci_common_swizzle - swizzle INTx all the way to root bridge
2404 * @dev: the PCI device
2405 * @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
2406 *
2407 * Perform INTx swizzling for a device. This traverses through all PCI-to-PCI
2408 * bridges all the way up to a PCI root bus.
2409 */
2410u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
2411{
2412 u8 pin = *pinp;
2413
2414 while (!pci_is_root_bus(dev->bus)) {
2415 pin = pci_swizzle_interrupt_pin(dev, pin);
2416 dev = dev->bus->self;
2417 }
2418 *pinp = pin;
2419 return PCI_SLOT(dev->devfn);
2420}
2421
2422/**
2423 * pci_release_region - Release a PCI bar
2424 * @pdev: PCI device whose resources were previously reserved by pci_request_region
2425 * @bar: BAR to release
2426 *
2427 * Releases the PCI I/O and memory resources previously reserved by a
2428 * successful call to pci_request_region. Call this function only
2429 * after all use of the PCI regions has ceased.
2430 */
2431void pci_release_region(struct pci_dev *pdev, int bar)
2432{
2433 struct pci_devres *dr;
2434
2435 if (pci_resource_len(pdev, bar) == 0)
2436 return;
2437 if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
2438 release_region(pci_resource_start(pdev, bar),
2439 pci_resource_len(pdev, bar));
2440 else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
2441 release_mem_region(pci_resource_start(pdev, bar),
2442 pci_resource_len(pdev, bar));
2443
2444 dr = find_pci_dr(pdev);
2445 if (dr)
2446 dr->region_mask &= ~(1 << bar);
2447}
2448
2449/**
2450 * __pci_request_region - Reserved PCI I/O and memory resource
2451 * @pdev: PCI device whose resources are to be reserved
2452 * @bar: BAR to be reserved
2453 * @res_name: Name to be associated with resource.
2454 * @exclusive: whether the region access is exclusive or not
2455 *
2456 * Mark the PCI region associated with PCI device @pdev BR @bar as
2457 * being reserved by owner @res_name. Do not access any
2458 * address inside the PCI regions unless this call returns
2459 * successfully.
2460 *
2461 * If @exclusive is set, then the region is marked so that userspace
2462 * is explicitly not allowed to map the resource via /dev/mem or
2463 * sysfs MMIO access.
2464 *
2465 * Returns 0 on success, or %EBUSY on error. A warning
2466 * message is also printed on failure.
2467 */
2468static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name,
2469 int exclusive)
2470{
2471 struct pci_devres *dr;
2472
2473 if (pci_resource_len(pdev, bar) == 0)
2474 return 0;
2475
2476 if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
2477 if (!request_region(pci_resource_start(pdev, bar),
2478 pci_resource_len(pdev, bar), res_name))
2479 goto err_out;
2480 }
2481 else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
2482 if (!__request_mem_region(pci_resource_start(pdev, bar),
2483 pci_resource_len(pdev, bar), res_name,
2484 exclusive))
2485 goto err_out;
2486 }
2487
2488 dr = find_pci_dr(pdev);
2489 if (dr)
2490 dr->region_mask |= 1 << bar;
2491
2492 return 0;
2493
2494err_out:
2495 dev_warn(&pdev->dev, "BAR %d: can't reserve %pR\n", bar,
2496 &pdev->resource[bar]);
2497 return -EBUSY;
2498}
2499
2500/**
2501 * pci_request_region - Reserve PCI I/O and memory resource
2502 * @pdev: PCI device whose resources are to be reserved
2503 * @bar: BAR to be reserved
2504 * @res_name: Name to be associated with resource
2505 *
2506 * Mark the PCI region associated with PCI device @pdev BAR @bar as
2507 * being reserved by owner @res_name. Do not access any
2508 * address inside the PCI regions unless this call returns
2509 * successfully.
2510 *
2511 * Returns 0 on success, or %EBUSY on error. A warning
2512 * message is also printed on failure.
2513 */
2514int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
2515{
2516 return __pci_request_region(pdev, bar, res_name, 0);
2517}
2518
2519/**
2520 * pci_request_region_exclusive - Reserved PCI I/O and memory resource
2521 * @pdev: PCI device whose resources are to be reserved
2522 * @bar: BAR to be reserved
2523 * @res_name: Name to be associated with resource.
2524 *
2525 * Mark the PCI region associated with PCI device @pdev BR @bar as
2526 * being reserved by owner @res_name. Do not access any
2527 * address inside the PCI regions unless this call returns
2528 * successfully.
2529 *
2530 * Returns 0 on success, or %EBUSY on error. A warning
2531 * message is also printed on failure.
2532 *
2533 * The key difference that _exclusive makes it that userspace is
2534 * explicitly not allowed to map the resource via /dev/mem or
2535 * sysfs.
2536 */
2537int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
2538{
2539 return __pci_request_region(pdev, bar, res_name, IORESOURCE_EXCLUSIVE);
2540}
2541/**
2542 * pci_release_selected_regions - Release selected PCI I/O and memory resources
2543 * @pdev: PCI device whose resources were previously reserved
2544 * @bars: Bitmask of BARs to be released
2545 *
2546 * Release selected PCI I/O and memory resources previously reserved.
2547 * Call this function only after all use of the PCI regions has ceased.
2548 */
2549void pci_release_selected_regions(struct pci_dev *pdev, int bars)
2550{
2551 int i;
2552
2553 for (i = 0; i < 6; i++)
2554 if (bars & (1 << i))
2555 pci_release_region(pdev, i);
2556}
2557
2558int __pci_request_selected_regions(struct pci_dev *pdev, int bars,
2559 const char *res_name, int excl)
2560{
2561 int i;
2562
2563 for (i = 0; i < 6; i++)
2564 if (bars & (1 << i))
2565 if (__pci_request_region(pdev, i, res_name, excl))
2566 goto err_out;
2567 return 0;
2568
2569err_out:
2570 while(--i >= 0)
2571 if (bars & (1 << i))
2572 pci_release_region(pdev, i);
2573
2574 return -EBUSY;
2575}
2576
2577
2578/**
2579 * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
2580 * @pdev: PCI device whose resources are to be reserved
2581 * @bars: Bitmask of BARs to be requested
2582 * @res_name: Name to be associated with resource
2583 */
2584int pci_request_selected_regions(struct pci_dev *pdev, int bars,
2585 const char *res_name)
2586{
2587 return __pci_request_selected_regions(pdev, bars, res_name, 0);
2588}
2589
2590int pci_request_selected_regions_exclusive(struct pci_dev *pdev,
2591 int bars, const char *res_name)
2592{
2593 return __pci_request_selected_regions(pdev, bars, res_name,
2594 IORESOURCE_EXCLUSIVE);
2595}
2596
2597/**
2598 * pci_release_regions - Release reserved PCI I/O and memory resources
2599 * @pdev: PCI device whose resources were previously reserved by pci_request_regions
2600 *
2601 * Releases all PCI I/O and memory resources previously reserved by a
2602 * successful call to pci_request_regions. Call this function only
2603 * after all use of the PCI regions has ceased.
2604 */
2605
2606void pci_release_regions(struct pci_dev *pdev)
2607{
2608 pci_release_selected_regions(pdev, (1 << 6) - 1);
2609}
2610
2611/**
2612 * pci_request_regions - Reserved PCI I/O and memory resources
2613 * @pdev: PCI device whose resources are to be reserved
2614 * @res_name: Name to be associated with resource.
2615 *
2616 * Mark all PCI regions associated with PCI device @pdev as
2617 * being reserved by owner @res_name. Do not access any
2618 * address inside the PCI regions unless this call returns
2619 * successfully.
2620 *
2621 * Returns 0 on success, or %EBUSY on error. A warning
2622 * message is also printed on failure.
2623 */
2624int pci_request_regions(struct pci_dev *pdev, const char *res_name)
2625{
2626 return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
2627}
2628
2629/**
2630 * pci_request_regions_exclusive - Reserved PCI I/O and memory resources
2631 * @pdev: PCI device whose resources are to be reserved
2632 * @res_name: Name to be associated with resource.
2633 *
2634 * Mark all PCI regions associated with PCI device @pdev as
2635 * being reserved by owner @res_name. Do not access any
2636 * address inside the PCI regions unless this call returns
2637 * successfully.
2638 *
2639 * pci_request_regions_exclusive() will mark the region so that
2640 * /dev/mem and the sysfs MMIO access will not be allowed.
2641 *
2642 * Returns 0 on success, or %EBUSY on error. A warning
2643 * message is also printed on failure.
2644 */
2645int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
2646{
2647 return pci_request_selected_regions_exclusive(pdev,
2648 ((1 << 6) - 1), res_name);
2649}
2650
2651static void __pci_set_master(struct pci_dev *dev, bool enable)
2652{
2653 u16 old_cmd, cmd;
2654
2655 pci_read_config_word(dev, PCI_COMMAND, &old_cmd);
2656 if (enable)
2657 cmd = old_cmd | PCI_COMMAND_MASTER;
2658 else
2659 cmd = old_cmd & ~PCI_COMMAND_MASTER;
2660 if (cmd != old_cmd) {
2661 dev_dbg(&dev->dev, "%s bus mastering\n",
2662 enable ? "enabling" : "disabling");
2663 pci_write_config_word(dev, PCI_COMMAND, cmd);
2664 }
2665 dev->is_busmaster = enable;
2666}
2667
2668/**
2669 * pcibios_set_master - enable PCI bus-mastering for device dev
2670 * @dev: the PCI device to enable
2671 *
2672 * Enables PCI bus-mastering for the device. This is the default
2673 * implementation. Architecture specific implementations can override
2674 * this if necessary.
2675 */
2676void __weak pcibios_set_master(struct pci_dev *dev)
2677{
2678 u8 lat;
2679
2680 /* The latency timer doesn't apply to PCIe (either Type 0 or Type 1) */
2681 if (pci_is_pcie(dev))
2682 return;
2683
2684 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
2685 if (lat < 16)
2686 lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
2687 else if (lat > pcibios_max_latency)
2688 lat = pcibios_max_latency;
2689 else
2690 return;
2691 dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
2692 pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
2693}
2694
2695/**
2696 * pci_set_master - enables bus-mastering for device dev
2697 * @dev: the PCI device to enable
2698 *
2699 * Enables bus-mastering on the device and calls pcibios_set_master()
2700 * to do the needed arch specific settings.
2701 */
2702void pci_set_master(struct pci_dev *dev)
2703{
2704 __pci_set_master(dev, true);
2705 pcibios_set_master(dev);
2706}
2707
2708/**
2709 * pci_clear_master - disables bus-mastering for device dev
2710 * @dev: the PCI device to disable
2711 */
2712void pci_clear_master(struct pci_dev *dev)
2713{
2714 __pci_set_master(dev, false);
2715}
2716
2717/**
2718 * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
2719 * @dev: the PCI device for which MWI is to be enabled
2720 *
2721 * Helper function for pci_set_mwi.
2722 * Originally copied from drivers/net/acenic.c.
2723 * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
2724 *
2725 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
2726 */
2727int pci_set_cacheline_size(struct pci_dev *dev)
2728{
2729 u8 cacheline_size;
2730
2731 if (!pci_cache_line_size)
2732 return -EINVAL;
2733
2734 /* Validate current setting: the PCI_CACHE_LINE_SIZE must be
2735 equal to or multiple of the right value. */
2736 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
2737 if (cacheline_size >= pci_cache_line_size &&
2738 (cacheline_size % pci_cache_line_size) == 0)
2739 return 0;
2740
2741 /* Write the correct value. */
2742 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
2743 /* Read it back. */
2744 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
2745 if (cacheline_size == pci_cache_line_size)
2746 return 0;
2747
2748 dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
2749 "supported\n", pci_cache_line_size << 2);
2750
2751 return -EINVAL;
2752}
2753EXPORT_SYMBOL_GPL(pci_set_cacheline_size);
2754
2755#ifdef PCI_DISABLE_MWI
2756int pci_set_mwi(struct pci_dev *dev)
2757{
2758 return 0;
2759}
2760
2761int pci_try_set_mwi(struct pci_dev *dev)
2762{
2763 return 0;
2764}
2765
2766void pci_clear_mwi(struct pci_dev *dev)
2767{
2768}
2769
2770#else
2771
2772/**
2773 * pci_set_mwi - enables memory-write-invalidate PCI transaction
2774 * @dev: the PCI device for which MWI is enabled
2775 *
2776 * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
2777 *
2778 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
2779 */
2780int
2781pci_set_mwi(struct pci_dev *dev)
2782{
2783 int rc;
2784 u16 cmd;
2785
2786 rc = pci_set_cacheline_size(dev);
2787 if (rc)
2788 return rc;
2789
2790 pci_read_config_word(dev, PCI_COMMAND, &cmd);
2791 if (! (cmd & PCI_COMMAND_INVALIDATE)) {
2792 dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
2793 cmd |= PCI_COMMAND_INVALIDATE;
2794 pci_write_config_word(dev, PCI_COMMAND, cmd);
2795 }
2796
2797 return 0;
2798}
2799
2800/**
2801 * pci_try_set_mwi - enables memory-write-invalidate PCI transaction
2802 * @dev: the PCI device for which MWI is enabled
2803 *
2804 * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
2805 * Callers are not required to check the return value.
2806 *
2807 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
2808 */
2809int pci_try_set_mwi(struct pci_dev *dev)
2810{
2811 int rc = pci_set_mwi(dev);
2812 return rc;
2813}
2814
2815/**
2816 * pci_clear_mwi - disables Memory-Write-Invalidate for device dev
2817 * @dev: the PCI device to disable
2818 *
2819 * Disables PCI Memory-Write-Invalidate transaction on the device
2820 */
2821void
2822pci_clear_mwi(struct pci_dev *dev)
2823{
2824 u16 cmd;
2825
2826 pci_read_config_word(dev, PCI_COMMAND, &cmd);
2827 if (cmd & PCI_COMMAND_INVALIDATE) {
2828 cmd &= ~PCI_COMMAND_INVALIDATE;
2829 pci_write_config_word(dev, PCI_COMMAND, cmd);
2830 }
2831}
2832#endif /* ! PCI_DISABLE_MWI */
2833
2834/**
2835 * pci_intx - enables/disables PCI INTx for device dev
2836 * @pdev: the PCI device to operate on
2837 * @enable: boolean: whether to enable or disable PCI INTx
2838 *
2839 * Enables/disables PCI INTx for device dev
2840 */
2841void
2842pci_intx(struct pci_dev *pdev, int enable)
2843{
2844 u16 pci_command, new;
2845
2846 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
2847
2848 if (enable) {
2849 new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
2850 } else {
2851 new = pci_command | PCI_COMMAND_INTX_DISABLE;
2852 }
2853
2854 if (new != pci_command) {
2855 struct pci_devres *dr;
2856
2857 pci_write_config_word(pdev, PCI_COMMAND, new);
2858
2859 dr = find_pci_dr(pdev);
2860 if (dr && !dr->restore_intx) {
2861 dr->restore_intx = 1;
2862 dr->orig_intx = !enable;
2863 }
2864 }
2865}
2866
2867/**
2868 * pci_intx_mask_supported - probe for INTx masking support
2869 * @dev: the PCI device to operate on
2870 *
2871 * Check if the device dev support INTx masking via the config space
2872 * command word.
2873 */
2874bool pci_intx_mask_supported(struct pci_dev *dev)
2875{
2876 bool mask_supported = false;
2877 u16 orig, new;
2878
2879 pci_cfg_access_lock(dev);
2880
2881 pci_read_config_word(dev, PCI_COMMAND, &orig);
2882 pci_write_config_word(dev, PCI_COMMAND,
2883 orig ^ PCI_COMMAND_INTX_DISABLE);
2884 pci_read_config_word(dev, PCI_COMMAND, &new);
2885
2886 /*
2887 * There's no way to protect against hardware bugs or detect them
2888 * reliably, but as long as we know what the value should be, let's
2889 * go ahead and check it.
2890 */
2891 if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
2892 dev_err(&dev->dev, "Command register changed from "
2893 "0x%x to 0x%x: driver or hardware bug?\n", orig, new);
2894 } else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
2895 mask_supported = true;
2896 pci_write_config_word(dev, PCI_COMMAND, orig);
2897 }
2898
2899 pci_cfg_access_unlock(dev);
2900 return mask_supported;
2901}
2902EXPORT_SYMBOL_GPL(pci_intx_mask_supported);
2903
2904static bool pci_check_and_set_intx_mask(struct pci_dev *dev, bool mask)
2905{
2906 struct pci_bus *bus = dev->bus;
2907 bool mask_updated = true;
2908 u32 cmd_status_dword;
2909 u16 origcmd, newcmd;
2910 unsigned long flags;
2911 bool irq_pending;
2912
2913 /*
2914 * We do a single dword read to retrieve both command and status.
2915 * Document assumptions that make this possible.
2916 */
2917 BUILD_BUG_ON(PCI_COMMAND % 4);
2918 BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS);
2919
2920 raw_spin_lock_irqsave(&pci_lock, flags);
2921
2922 bus->ops->read(bus, dev->devfn, PCI_COMMAND, 4, &cmd_status_dword);
2923
2924 irq_pending = (cmd_status_dword >> 16) & PCI_STATUS_INTERRUPT;
2925
2926 /*
2927 * Check interrupt status register to see whether our device
2928 * triggered the interrupt (when masking) or the next IRQ is
2929 * already pending (when unmasking).
2930 */
2931 if (mask != irq_pending) {
2932 mask_updated = false;
2933 goto done;
2934 }
2935
2936 origcmd = cmd_status_dword;
2937 newcmd = origcmd & ~PCI_COMMAND_INTX_DISABLE;
2938 if (mask)
2939 newcmd |= PCI_COMMAND_INTX_DISABLE;
2940 if (newcmd != origcmd)
2941 bus->ops->write(bus, dev->devfn, PCI_COMMAND, 2, newcmd);
2942
2943done:
2944 raw_spin_unlock_irqrestore(&pci_lock, flags);
2945
2946 return mask_updated;
2947}
2948
2949/**
2950 * pci_check_and_mask_intx - mask INTx on pending interrupt
2951 * @dev: the PCI device to operate on
2952 *
2953 * Check if the device dev has its INTx line asserted, mask it and
2954 * return true in that case. False is returned if not interrupt was
2955 * pending.
2956 */
2957bool pci_check_and_mask_intx(struct pci_dev *dev)
2958{
2959 return pci_check_and_set_intx_mask(dev, true);
2960}
2961EXPORT_SYMBOL_GPL(pci_check_and_mask_intx);
2962
2963/**
2964 * pci_check_and_mask_intx - unmask INTx of no interrupt is pending
2965 * @dev: the PCI device to operate on
2966 *
2967 * Check if the device dev has its INTx line asserted, unmask it if not
2968 * and return true. False is returned and the mask remains active if
2969 * there was still an interrupt pending.
2970 */
2971bool pci_check_and_unmask_intx(struct pci_dev *dev)
2972{
2973 return pci_check_and_set_intx_mask(dev, false);
2974}
2975EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx);
2976
2977/**
2978 * pci_msi_off - disables any msi or msix capabilities
2979 * @dev: the PCI device to operate on
2980 *
2981 * If you want to use msi see pci_enable_msi and friends.
2982 * This is a lower level primitive that allows us to disable
2983 * msi operation at the device level.
2984 */
2985void pci_msi_off(struct pci_dev *dev)
2986{
2987 int pos;
2988 u16 control;
2989
2990 pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
2991 if (pos) {
2992 pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
2993 control &= ~PCI_MSI_FLAGS_ENABLE;
2994 pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
2995 }
2996 pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
2997 if (pos) {
2998 pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
2999 control &= ~PCI_MSIX_FLAGS_ENABLE;
3000 pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
3001 }
3002}
3003EXPORT_SYMBOL_GPL(pci_msi_off);
3004
3005int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
3006{
3007 return dma_set_max_seg_size(&dev->dev, size);
3008}
3009EXPORT_SYMBOL(pci_set_dma_max_seg_size);
3010
3011int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
3012{
3013 return dma_set_seg_boundary(&dev->dev, mask);
3014}
3015EXPORT_SYMBOL(pci_set_dma_seg_boundary);
3016
3017static int pcie_flr(struct pci_dev *dev, int probe)
3018{
3019 int i;
3020 int pos;
3021 u32 cap;
3022 u16 status, control;
3023
3024 pos = pci_pcie_cap(dev);
3025 if (!pos)
3026 return -ENOTTY;
3027
3028 pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
3029 if (!(cap & PCI_EXP_DEVCAP_FLR))
3030 return -ENOTTY;
3031
3032 if (probe)
3033 return 0;
3034
3035 /* Wait for Transaction Pending bit clean */
3036 for (i = 0; i < 4; i++) {
3037 if (i)
3038 msleep((1 << (i - 1)) * 100);
3039
3040 pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
3041 if (!(status & PCI_EXP_DEVSTA_TRPND))
3042 goto clear;
3043 }
3044
3045 dev_err(&dev->dev, "transaction is not cleared; "
3046 "proceeding with reset anyway\n");
3047
3048clear:
3049 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &control);
3050 control |= PCI_EXP_DEVCTL_BCR_FLR;
3051 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, control);
3052
3053 msleep(100);
3054
3055 return 0;
3056}
3057
3058static int pci_af_flr(struct pci_dev *dev, int probe)
3059{
3060 int i;
3061 int pos;
3062 u8 cap;
3063 u8 status;
3064
3065 pos = pci_find_capability(dev, PCI_CAP_ID_AF);
3066 if (!pos)
3067 return -ENOTTY;
3068
3069 pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
3070 if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
3071 return -ENOTTY;
3072
3073 if (probe)
3074 return 0;
3075
3076 /* Wait for Transaction Pending bit clean */
3077 for (i = 0; i < 4; i++) {
3078 if (i)
3079 msleep((1 << (i - 1)) * 100);
3080
3081 pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
3082 if (!(status & PCI_AF_STATUS_TP))
3083 goto clear;
3084 }
3085
3086 dev_err(&dev->dev, "transaction is not cleared; "
3087 "proceeding with reset anyway\n");
3088
3089clear:
3090 pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
3091 msleep(100);
3092
3093 return 0;
3094}
3095
3096/**
3097 * pci_pm_reset - Put device into PCI_D3 and back into PCI_D0.
3098 * @dev: Device to reset.
3099 * @probe: If set, only check if the device can be reset this way.
3100 *
3101 * If @dev supports native PCI PM and its PCI_PM_CTRL_NO_SOFT_RESET flag is
3102 * unset, it will be reinitialized internally when going from PCI_D3hot to
3103 * PCI_D0. If that's the case and the device is not in a low-power state
3104 * already, force it into PCI_D3hot and back to PCI_D0, causing it to be reset.
3105 *
3106 * NOTE: This causes the caller to sleep for twice the device power transition
3107 * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms
3108 * by devault (i.e. unless the @dev's d3_delay field has a different value).
3109 * Moreover, only devices in D0 can be reset by this function.
3110 */
3111static int pci_pm_reset(struct pci_dev *dev, int probe)
3112{
3113 u16 csr;
3114
3115 if (!dev->pm_cap)
3116 return -ENOTTY;
3117
3118 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
3119 if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
3120 return -ENOTTY;
3121
3122 if (probe)
3123 return 0;
3124
3125 if (dev->current_state != PCI_D0)
3126 return -EINVAL;
3127
3128 csr &= ~PCI_PM_CTRL_STATE_MASK;
3129 csr |= PCI_D3hot;
3130 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
3131 pci_dev_d3_sleep(dev);
3132
3133 csr &= ~PCI_PM_CTRL_STATE_MASK;
3134 csr |= PCI_D0;
3135 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
3136 pci_dev_d3_sleep(dev);
3137
3138 return 0;
3139}
3140
3141static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
3142{
3143 u16 ctrl;
3144 struct pci_dev *pdev;
3145
3146 if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
3147 return -ENOTTY;
3148
3149 list_for_each_entry(pdev, &dev->bus->devices, bus_list)
3150 if (pdev != dev)
3151 return -ENOTTY;
3152
3153 if (probe)
3154 return 0;
3155
3156 pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
3157 ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
3158 pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
3159 msleep(100);
3160
3161 ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
3162 pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
3163 msleep(100);
3164
3165 return 0;
3166}
3167
3168static int __pci_dev_reset(struct pci_dev *dev, int probe)
3169{
3170 int rc;
3171
3172 might_sleep();
3173
3174 rc = pci_dev_specific_reset(dev, probe);
3175 if (rc != -ENOTTY)
3176 goto done;
3177
3178 rc = pcie_flr(dev, probe);
3179 if (rc != -ENOTTY)
3180 goto done;
3181
3182 rc = pci_af_flr(dev, probe);
3183 if (rc != -ENOTTY)
3184 goto done;
3185
3186 rc = pci_pm_reset(dev, probe);
3187 if (rc != -ENOTTY)
3188 goto done;
3189
3190 rc = pci_parent_bus_reset(dev, probe);
3191done:
3192 return rc;
3193}
3194
3195static int pci_dev_reset(struct pci_dev *dev, int probe)
3196{
3197 int rc;
3198
3199 if (!probe) {
3200 pci_cfg_access_lock(dev);
3201 /* block PM suspend, driver probe, etc. */
3202 device_lock(&dev->dev);
3203 }
3204
3205 rc = __pci_dev_reset(dev, probe);
3206
3207 if (!probe) {
3208 device_unlock(&dev->dev);
3209 pci_cfg_access_unlock(dev);
3210 }
3211 return rc;
3212}
3213/**
3214 * __pci_reset_function - reset a PCI device function
3215 * @dev: PCI device to reset
3216 *
3217 * Some devices allow an individual function to be reset without affecting
3218 * other functions in the same device. The PCI device must be responsive
3219 * to PCI config space in order to use this function.
3220 *
3221 * The device function is presumed to be unused when this function is called.
3222 * Resetting the device will make the contents of PCI configuration space
3223 * random, so any caller of this must be prepared to reinitialise the
3224 * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
3225 * etc.
3226 *
3227 * Returns 0 if the device function was successfully reset or negative if the
3228 * device doesn't support resetting a single function.
3229 */
3230int __pci_reset_function(struct pci_dev *dev)
3231{
3232 return pci_dev_reset(dev, 0);
3233}
3234EXPORT_SYMBOL_GPL(__pci_reset_function);
3235
3236/**
3237 * __pci_reset_function_locked - reset a PCI device function while holding
3238 * the @dev mutex lock.
3239 * @dev: PCI device to reset
3240 *
3241 * Some devices allow an individual function to be reset without affecting
3242 * other functions in the same device. The PCI device must be responsive
3243 * to PCI config space in order to use this function.
3244 *
3245 * The device function is presumed to be unused and the caller is holding
3246 * the device mutex lock when this function is called.
3247 * Resetting the device will make the contents of PCI configuration space
3248 * random, so any caller of this must be prepared to reinitialise the
3249 * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
3250 * etc.
3251 *
3252 * Returns 0 if the device function was successfully reset or negative if the
3253 * device doesn't support resetting a single function.
3254 */
3255int __pci_reset_function_locked(struct pci_dev *dev)
3256{
3257 return __pci_dev_reset(dev, 0);
3258}
3259EXPORT_SYMBOL_GPL(__pci_reset_function_locked);
3260
3261/**
3262 * pci_probe_reset_function - check whether the device can be safely reset
3263 * @dev: PCI device to reset
3264 *
3265 * Some devices allow an individual function to be reset without affecting
3266 * other functions in the same device. The PCI device must be responsive
3267 * to PCI config space in order to use this function.
3268 *
3269 * Returns 0 if the device function can be reset or negative if the
3270 * device doesn't support resetting a single function.
3271 */
3272int pci_probe_reset_function(struct pci_dev *dev)
3273{
3274 return pci_dev_reset(dev, 1);
3275}
3276
3277/**
3278 * pci_reset_function - quiesce and reset a PCI device function
3279 * @dev: PCI device to reset
3280 *
3281 * Some devices allow an individual function to be reset without affecting
3282 * other functions in the same device. The PCI device must be responsive
3283 * to PCI config space in order to use this function.
3284 *
3285 * This function does not just reset the PCI portion of a device, but
3286 * clears all the state associated with the device. This function differs
3287 * from __pci_reset_function in that it saves and restores device state
3288 * over the reset.
3289 *
3290 * Returns 0 if the device function was successfully reset or negative if the
3291 * device doesn't support resetting a single function.
3292 */
3293int pci_reset_function(struct pci_dev *dev)
3294{
3295 int rc;
3296
3297 rc = pci_dev_reset(dev, 1);
3298 if (rc)
3299 return rc;
3300
3301 pci_save_state(dev);
3302
3303 /*
3304 * both INTx and MSI are disabled after the Interrupt Disable bit
3305 * is set and the Bus Master bit is cleared.
3306 */
3307 pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
3308
3309 rc = pci_dev_reset(dev, 0);
3310
3311 pci_restore_state(dev);
3312
3313 return rc;
3314}
3315EXPORT_SYMBOL_GPL(pci_reset_function);
3316
3317/**
3318 * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
3319 * @dev: PCI device to query
3320 *
3321 * Returns mmrbc: maximum designed memory read count in bytes
3322 * or appropriate error value.
3323 */
3324int pcix_get_max_mmrbc(struct pci_dev *dev)
3325{
3326 int cap;
3327 u32 stat;
3328
3329 cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
3330 if (!cap)
3331 return -EINVAL;
3332
3333 if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
3334 return -EINVAL;
3335
3336 return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21);
3337}
3338EXPORT_SYMBOL(pcix_get_max_mmrbc);
3339
3340/**
3341 * pcix_get_mmrbc - get PCI-X maximum memory read byte count
3342 * @dev: PCI device to query
3343 *
3344 * Returns mmrbc: maximum memory read count in bytes
3345 * or appropriate error value.
3346 */
3347int pcix_get_mmrbc(struct pci_dev *dev)
3348{
3349 int cap;
3350 u16 cmd;
3351
3352 cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
3353 if (!cap)
3354 return -EINVAL;
3355
3356 if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
3357 return -EINVAL;
3358
3359 return 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
3360}
3361EXPORT_SYMBOL(pcix_get_mmrbc);
3362
3363/**
3364 * pcix_set_mmrbc - set PCI-X maximum memory read byte count
3365 * @dev: PCI device to query
3366 * @mmrbc: maximum memory read count in bytes
3367 * valid values are 512, 1024, 2048, 4096
3368 *
3369 * If possible sets maximum memory read byte count, some bridges have erratas
3370 * that prevent this.
3371 */
3372int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
3373{
3374 int cap;
3375 u32 stat, v, o;
3376 u16 cmd;
3377
3378 if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc))
3379 return -EINVAL;
3380
3381 v = ffs(mmrbc) - 10;
3382
3383 cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
3384 if (!cap)
3385 return -EINVAL;
3386
3387 if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
3388 return -EINVAL;
3389
3390 if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
3391 return -E2BIG;
3392
3393 if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
3394 return -EINVAL;
3395
3396 o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
3397 if (o != v) {
3398 if (v > o && dev->bus &&
3399 (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
3400 return -EIO;
3401
3402 cmd &= ~PCI_X_CMD_MAX_READ;
3403 cmd |= v << 2;
3404 if (pci_write_config_word(dev, cap + PCI_X_CMD, cmd))
3405 return -EIO;
3406 }
3407 return 0;
3408}
3409EXPORT_SYMBOL(pcix_set_mmrbc);
3410
3411/**
3412 * pcie_get_readrq - get PCI Express read request size
3413 * @dev: PCI device to query
3414 *
3415 * Returns maximum memory read request in bytes
3416 * or appropriate error value.
3417 */
3418int pcie_get_readrq(struct pci_dev *dev)
3419{
3420 int ret, cap;
3421 u16 ctl;
3422
3423 cap = pci_pcie_cap(dev);
3424 if (!cap)
3425 return -EINVAL;
3426
3427 ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3428 if (!ret)
3429 ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
3430
3431 return ret;
3432}
3433EXPORT_SYMBOL(pcie_get_readrq);
3434
3435/**
3436 * pcie_set_readrq - set PCI Express maximum memory read request
3437 * @dev: PCI device to query
3438 * @rq: maximum memory read count in bytes
3439 * valid values are 128, 256, 512, 1024, 2048, 4096
3440 *
3441 * If possible sets maximum memory read request in bytes
3442 */
3443int pcie_set_readrq(struct pci_dev *dev, int rq)
3444{
3445 int cap, err = -EINVAL;
3446 u16 ctl, v;
3447
3448 if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
3449 goto out;
3450
3451 cap = pci_pcie_cap(dev);
3452 if (!cap)
3453 goto out;
3454
3455 err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3456 if (err)
3457 goto out;
3458 /*
3459 * If using the "performance" PCIe config, we clamp the
3460 * read rq size to the max packet size to prevent the
3461 * host bridge generating requests larger than we can
3462 * cope with
3463 */
3464 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
3465 int mps = pcie_get_mps(dev);
3466
3467 if (mps < 0)
3468 return mps;
3469 if (mps < rq)
3470 rq = mps;
3471 }
3472
3473 v = (ffs(rq) - 8) << 12;
3474
3475 if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
3476 ctl &= ~PCI_EXP_DEVCTL_READRQ;
3477 ctl |= v;
3478 err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, ctl);
3479 }
3480
3481out:
3482 return err;
3483}
3484EXPORT_SYMBOL(pcie_set_readrq);
3485
3486/**
3487 * pcie_get_mps - get PCI Express maximum payload size
3488 * @dev: PCI device to query
3489 *
3490 * Returns maximum payload size in bytes
3491 * or appropriate error value.
3492 */
3493int pcie_get_mps(struct pci_dev *dev)
3494{
3495 int ret, cap;
3496 u16 ctl;
3497
3498 cap = pci_pcie_cap(dev);
3499 if (!cap)
3500 return -EINVAL;
3501
3502 ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3503 if (!ret)
3504 ret = 128 << ((ctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
3505
3506 return ret;
3507}
3508
3509/**
3510 * pcie_set_mps - set PCI Express maximum payload size
3511 * @dev: PCI device to query
3512 * @mps: maximum payload size in bytes
3513 * valid values are 128, 256, 512, 1024, 2048, 4096
3514 *
3515 * If possible sets maximum payload size
3516 */
3517int pcie_set_mps(struct pci_dev *dev, int mps)
3518{
3519 int cap, err = -EINVAL;
3520 u16 ctl, v;
3521
3522 if (mps < 128 || mps > 4096 || !is_power_of_2(mps))
3523 goto out;
3524
3525 v = ffs(mps) - 8;
3526 if (v > dev->pcie_mpss)
3527 goto out;
3528 v <<= 5;
3529
3530 cap = pci_pcie_cap(dev);
3531 if (!cap)
3532 goto out;
3533
3534 err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
3535 if (err)
3536 goto out;
3537
3538 if ((ctl & PCI_EXP_DEVCTL_PAYLOAD) != v) {
3539 ctl &= ~PCI_EXP_DEVCTL_PAYLOAD;
3540 ctl |= v;
3541 err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, ctl);
3542 }
3543out:
3544 return err;
3545}
3546
3547/**
3548 * pci_select_bars - Make BAR mask from the type of resource
3549 * @dev: the PCI device for which BAR mask is made
3550 * @flags: resource type mask to be selected
3551 *
3552 * This helper routine makes bar mask from the type of resource.
3553 */
3554int pci_select_bars(struct pci_dev *dev, unsigned long flags)
3555{
3556 int i, bars = 0;
3557 for (i = 0; i < PCI_NUM_RESOURCES; i++)
3558 if (pci_resource_flags(dev, i) & flags)
3559 bars |= (1 << i);
3560 return bars;
3561}
3562
3563/**
3564 * pci_resource_bar - get position of the BAR associated with a resource
3565 * @dev: the PCI device
3566 * @resno: the resource number
3567 * @type: the BAR type to be filled in
3568 *
3569 * Returns BAR position in config space, or 0 if the BAR is invalid.
3570 */
3571int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
3572{
3573 int reg;
3574
3575 if (resno < PCI_ROM_RESOURCE) {
3576 *type = pci_bar_unknown;
3577 return PCI_BASE_ADDRESS_0 + 4 * resno;
3578 } else if (resno == PCI_ROM_RESOURCE) {
3579 *type = pci_bar_mem32;
3580 return dev->rom_base_reg;
3581 } else if (resno < PCI_BRIDGE_RESOURCES) {
3582 /* device specific resource */
3583 reg = pci_iov_resource_bar(dev, resno, type);
3584 if (reg)
3585 return reg;
3586 }
3587
3588 dev_err(&dev->dev, "BAR %d: invalid resource\n", resno);
3589 return 0;
3590}
3591
3592/* Some architectures require additional programming to enable VGA */
3593static arch_set_vga_state_t arch_set_vga_state;
3594
3595void __init pci_register_set_vga_state(arch_set_vga_state_t func)
3596{
3597 arch_set_vga_state = func; /* NULL disables */
3598}
3599
3600static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
3601 unsigned int command_bits, u32 flags)
3602{
3603 if (arch_set_vga_state)
3604 return arch_set_vga_state(dev, decode, command_bits,
3605 flags);
3606 return 0;
3607}
3608
3609/**
3610 * pci_set_vga_state - set VGA decode state on device and parents if requested
3611 * @dev: the PCI device
3612 * @decode: true = enable decoding, false = disable decoding
3613 * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
3614 * @flags: traverse ancestors and change bridges
3615 * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE
3616 */
3617int pci_set_vga_state(struct pci_dev *dev, bool decode,
3618 unsigned int command_bits, u32 flags)
3619{
3620 struct pci_bus *bus;
3621 struct pci_dev *bridge;
3622 u16 cmd;
3623 int rc;
3624
3625 WARN_ON((flags & PCI_VGA_STATE_CHANGE_DECODES) & (command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)));
3626
3627 /* ARCH specific VGA enables */
3628 rc = pci_set_vga_state_arch(dev, decode, command_bits, flags);
3629 if (rc)
3630 return rc;
3631
3632 if (flags & PCI_VGA_STATE_CHANGE_DECODES) {
3633 pci_read_config_word(dev, PCI_COMMAND, &cmd);
3634 if (decode == true)
3635 cmd |= command_bits;
3636 else
3637 cmd &= ~command_bits;
3638 pci_write_config_word(dev, PCI_COMMAND, cmd);
3639 }
3640
3641 if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
3642 return 0;
3643
3644 bus = dev->bus;
3645 while (bus) {
3646 bridge = bus->self;
3647 if (bridge) {
3648 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
3649 &cmd);
3650 if (decode == true)
3651 cmd |= PCI_BRIDGE_CTL_VGA;
3652 else
3653 cmd &= ~PCI_BRIDGE_CTL_VGA;
3654 pci_write_config_word(bridge, PCI_BRIDGE_CONTROL,
3655 cmd);
3656 }
3657 bus = bus->parent;
3658 }
3659 return 0;
3660}
3661
3662#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
3663static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
3664static DEFINE_SPINLOCK(resource_alignment_lock);
3665
3666/**
3667 * pci_specified_resource_alignment - get resource alignment specified by user.
3668 * @dev: the PCI device to get
3669 *
3670 * RETURNS: Resource alignment if it is specified.
3671 * Zero if it is not specified.
3672 */
3673resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
3674{
3675 int seg, bus, slot, func, align_order, count;
3676 resource_size_t align = 0;
3677 char *p;
3678
3679 spin_lock(&resource_alignment_lock);
3680 p = resource_alignment_param;
3681 while (*p) {
3682 count = 0;
3683 if (sscanf(p, "%d%n", &align_order, &count) == 1 &&
3684 p[count] == '@') {
3685 p += count + 1;
3686 } else {
3687 align_order = -1;
3688 }
3689 if (sscanf(p, "%x:%x:%x.%x%n",
3690 &seg, &bus, &slot, &func, &count) != 4) {
3691 seg = 0;
3692 if (sscanf(p, "%x:%x.%x%n",
3693 &bus, &slot, &func, &count) != 3) {
3694 /* Invalid format */
3695 printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
3696 p);
3697 break;
3698 }
3699 }
3700 p += count;
3701 if (seg == pci_domain_nr(dev->bus) &&
3702 bus == dev->bus->number &&
3703 slot == PCI_SLOT(dev->devfn) &&
3704 func == PCI_FUNC(dev->devfn)) {
3705 if (align_order == -1) {
3706 align = PAGE_SIZE;
3707 } else {
3708 align = 1 << align_order;
3709 }
3710 /* Found */
3711 break;
3712 }
3713 if (*p != ';' && *p != ',') {
3714 /* End of param or invalid format */
3715 break;
3716 }
3717 p++;
3718 }
3719 spin_unlock(&resource_alignment_lock);
3720 return align;
3721}
3722
3723/**
3724 * pci_is_reassigndev - check if specified PCI is target device to reassign
3725 * @dev: the PCI device to check
3726 *
3727 * RETURNS: non-zero for PCI device is a target device to reassign,
3728 * or zero is not.
3729 */
3730int pci_is_reassigndev(struct pci_dev *dev)
3731{
3732 return (pci_specified_resource_alignment(dev) != 0);
3733}
3734
3735/*
3736 * This function disables memory decoding and releases memory resources
3737 * of the device specified by kernel's boot parameter 'pci=resource_alignment='.
3738 * It also rounds up size to specified alignment.
3739 * Later on, the kernel will assign page-aligned memory resource back
3740 * to the device.
3741 */
3742void pci_reassigndev_resource_alignment(struct pci_dev *dev)
3743{
3744 int i;
3745 struct resource *r;
3746 resource_size_t align, size;
3747 u16 command;
3748
3749 if (!pci_is_reassigndev(dev))
3750 return;
3751
3752 if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL &&
3753 (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
3754 dev_warn(&dev->dev,
3755 "Can't reassign resources to host bridge.\n");
3756 return;
3757 }
3758
3759 dev_info(&dev->dev,
3760 "Disabling memory decoding and releasing memory resources.\n");
3761 pci_read_config_word(dev, PCI_COMMAND, &command);
3762 command &= ~PCI_COMMAND_MEMORY;
3763 pci_write_config_word(dev, PCI_COMMAND, command);
3764
3765 align = pci_specified_resource_alignment(dev);
3766 for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
3767 r = &dev->resource[i];
3768 if (!(r->flags & IORESOURCE_MEM))
3769 continue;
3770 size = resource_size(r);
3771 if (size < align) {
3772 size = align;
3773 dev_info(&dev->dev,
3774 "Rounding up size of resource #%d to %#llx.\n",
3775 i, (unsigned long long)size);
3776 }
3777 r->end = size - 1;
3778 r->start = 0;
3779 }
3780 /* Need to disable bridge's resource window,
3781 * to enable the kernel to reassign new resource
3782 * window later on.
3783 */
3784 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
3785 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
3786 for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
3787 r = &dev->resource[i];
3788 if (!(r->flags & IORESOURCE_MEM))
3789 continue;
3790 r->end = resource_size(r) - 1;
3791 r->start = 0;
3792 }
3793 pci_disable_bridge_window(dev);
3794 }
3795}
3796
3797ssize_t pci_set_resource_alignment_param(const char *buf, size_t count)
3798{
3799 if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1)
3800 count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1;
3801 spin_lock(&resource_alignment_lock);
3802 strncpy(resource_alignment_param, buf, count);
3803 resource_alignment_param[count] = '\0';
3804 spin_unlock(&resource_alignment_lock);
3805 return count;
3806}
3807
3808ssize_t pci_get_resource_alignment_param(char *buf, size_t size)
3809{
3810 size_t count;
3811 spin_lock(&resource_alignment_lock);
3812 count = snprintf(buf, size, "%s", resource_alignment_param);
3813 spin_unlock(&resource_alignment_lock);
3814 return count;
3815}
3816
3817static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf)
3818{
3819 return pci_get_resource_alignment_param(buf, PAGE_SIZE);
3820}
3821
3822static ssize_t pci_resource_alignment_store(struct bus_type *bus,
3823 const char *buf, size_t count)
3824{
3825 return pci_set_resource_alignment_param(buf, count);
3826}
3827
3828BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
3829 pci_resource_alignment_store);
3830
3831static int __init pci_resource_alignment_sysfs_init(void)
3832{
3833 return bus_create_file(&pci_bus_type,
3834 &bus_attr_resource_alignment);
3835}
3836
3837late_initcall(pci_resource_alignment_sysfs_init);
3838
3839static void __devinit pci_no_domains(void)
3840{
3841#ifdef CONFIG_PCI_DOMAINS
3842 pci_domains_supported = 0;
3843#endif
3844}
3845
3846/**
3847 * pci_ext_cfg_enabled - can we access extended PCI config space?
3848 * @dev: The PCI device of the root bridge.
3849 *
3850 * Returns 1 if we can access PCI extended config space (offsets
3851 * greater than 0xff). This is the default implementation. Architecture
3852 * implementations can override this.
3853 */
3854int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
3855{
3856 return 1;
3857}
3858
3859void __weak pci_fixup_cardbus(struct pci_bus *bus)
3860{
3861}
3862EXPORT_SYMBOL(pci_fixup_cardbus);
3863
3864static int __init pci_setup(char *str)
3865{
3866 while (str) {
3867 char *k = strchr(str, ',');
3868 if (k)
3869 *k++ = 0;
3870 if (*str && (str = pcibios_setup(str)) && *str) {
3871 if (!strcmp(str, "nomsi")) {
3872 pci_no_msi();
3873 } else if (!strcmp(str, "noaer")) {
3874 pci_no_aer();
3875 } else if (!strncmp(str, "realloc=", 8)) {
3876 pci_realloc_get_opt(str + 8);
3877 } else if (!strncmp(str, "realloc", 7)) {
3878 pci_realloc_get_opt("on");
3879 } else if (!strcmp(str, "nodomains")) {
3880 pci_no_domains();
3881 } else if (!strncmp(str, "noari", 5)) {
3882 pcie_ari_disabled = true;
3883 } else if (!strncmp(str, "cbiosize=", 9)) {
3884 pci_cardbus_io_size = memparse(str + 9, &str);
3885 } else if (!strncmp(str, "cbmemsize=", 10)) {
3886 pci_cardbus_mem_size = memparse(str + 10, &str);
3887 } else if (!strncmp(str, "resource_alignment=", 19)) {
3888 pci_set_resource_alignment_param(str + 19,
3889 strlen(str + 19));
3890 } else if (!strncmp(str, "ecrc=", 5)) {
3891 pcie_ecrc_get_policy(str + 5);
3892 } else if (!strncmp(str, "hpiosize=", 9)) {
3893 pci_hotplug_io_size = memparse(str + 9, &str);
3894 } else if (!strncmp(str, "hpmemsize=", 10)) {
3895 pci_hotplug_mem_size = memparse(str + 10, &str);
3896 } else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
3897 pcie_bus_config = PCIE_BUS_TUNE_OFF;
3898 } else if (!strncmp(str, "pcie_bus_safe", 13)) {
3899 pcie_bus_config = PCIE_BUS_SAFE;
3900 } else if (!strncmp(str, "pcie_bus_perf", 13)) {
3901 pcie_bus_config = PCIE_BUS_PERFORMANCE;
3902 } else if (!strncmp(str, "pcie_bus_peer2peer", 18)) {
3903 pcie_bus_config = PCIE_BUS_PEER2PEER;
3904 } else if (!strncmp(str, "pcie_scan_all", 13)) {
3905 pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
3906 } else {
3907 printk(KERN_ERR "PCI: Unknown option `%s'\n",
3908 str);
3909 }
3910 }
3911 str = k;
3912 }
3913 return 0;
3914}
3915early_param("pci", pci_setup);
3916
3917EXPORT_SYMBOL(pci_reenable_device);
3918EXPORT_SYMBOL(pci_enable_device_io);
3919EXPORT_SYMBOL(pci_enable_device_mem);
3920EXPORT_SYMBOL(pci_enable_device);
3921EXPORT_SYMBOL(pcim_enable_device);
3922EXPORT_SYMBOL(pcim_pin_device);
3923EXPORT_SYMBOL(pci_disable_device);
3924EXPORT_SYMBOL(pci_find_capability);
3925EXPORT_SYMBOL(pci_bus_find_capability);
3926EXPORT_SYMBOL(pci_release_regions);
3927EXPORT_SYMBOL(pci_request_regions);
3928EXPORT_SYMBOL(pci_request_regions_exclusive);
3929EXPORT_SYMBOL(pci_release_region);
3930EXPORT_SYMBOL(pci_request_region);
3931EXPORT_SYMBOL(pci_request_region_exclusive);
3932EXPORT_SYMBOL(pci_release_selected_regions);
3933EXPORT_SYMBOL(pci_request_selected_regions);
3934EXPORT_SYMBOL(pci_request_selected_regions_exclusive);
3935EXPORT_SYMBOL(pci_set_master);
3936EXPORT_SYMBOL(pci_clear_master);
3937EXPORT_SYMBOL(pci_set_mwi);
3938EXPORT_SYMBOL(pci_try_set_mwi);
3939EXPORT_SYMBOL(pci_clear_mwi);
3940EXPORT_SYMBOL_GPL(pci_intx);
3941EXPORT_SYMBOL(pci_assign_resource);
3942EXPORT_SYMBOL(pci_find_parent_resource);
3943EXPORT_SYMBOL(pci_select_bars);
3944
3945EXPORT_SYMBOL(pci_set_power_state);
3946EXPORT_SYMBOL(pci_save_state);
3947EXPORT_SYMBOL(pci_restore_state);
3948EXPORT_SYMBOL(pci_pme_capable);
3949EXPORT_SYMBOL(pci_pme_active);
3950EXPORT_SYMBOL(pci_wake_from_d3);
3951EXPORT_SYMBOL(pci_target_state);
3952EXPORT_SYMBOL(pci_prepare_to_sleep);
3953EXPORT_SYMBOL(pci_back_from_sleep);
3954EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);