Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Broadcom BCM7038 PWM driver
4 * Author: Florian Fainelli
5 *
6 * Copyright (C) 2015 Broadcom Corporation
7 */
8
9#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
10
11#include <linux/clk.h>
12#include <linux/export.h>
13#include <linux/init.h>
14#include <linux/io.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/of.h>
18#include <linux/platform_device.h>
19#include <linux/pwm.h>
20#include <linux/spinlock.h>
21
22#define PWM_CTRL 0x00
23#define CTRL_START BIT(0)
24#define CTRL_OEB BIT(1)
25#define CTRL_FORCE_HIGH BIT(2)
26#define CTRL_OPENDRAIN BIT(3)
27#define CTRL_CHAN_OFFS 4
28
29#define PWM_CTRL2 0x04
30#define CTRL2_OUT_SELECT BIT(0)
31
32#define PWM_CH_SIZE 0x8
33
34#define PWM_CWORD_MSB(ch) (0x08 + ((ch) * PWM_CH_SIZE))
35#define PWM_CWORD_LSB(ch) (0x0c + ((ch) * PWM_CH_SIZE))
36
37/* Number of bits for the CWORD value */
38#define CWORD_BIT_SIZE 16
39
40/*
41 * Maximum control word value allowed when variable-frequency PWM is used as a
42 * clock for the constant-frequency PMW.
43 */
44#define CONST_VAR_F_MAX 32768
45#define CONST_VAR_F_MIN 1
46
47#define PWM_ON(ch) (0x18 + ((ch) * PWM_CH_SIZE))
48#define PWM_ON_MIN 1
49#define PWM_PERIOD(ch) (0x1c + ((ch) * PWM_CH_SIZE))
50#define PWM_PERIOD_MIN 0
51
52#define PWM_ON_PERIOD_MAX 0xff
53
54struct brcmstb_pwm {
55 void __iomem *base;
56 struct clk *clk;
57 struct pwm_chip chip;
58};
59
60static inline u32 brcmstb_pwm_readl(struct brcmstb_pwm *p,
61 unsigned int offset)
62{
63 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
64 return __raw_readl(p->base + offset);
65 else
66 return readl_relaxed(p->base + offset);
67}
68
69static inline void brcmstb_pwm_writel(struct brcmstb_pwm *p, u32 value,
70 unsigned int offset)
71{
72 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
73 __raw_writel(value, p->base + offset);
74 else
75 writel_relaxed(value, p->base + offset);
76}
77
78static inline struct brcmstb_pwm *to_brcmstb_pwm(struct pwm_chip *chip)
79{
80 return container_of(chip, struct brcmstb_pwm, chip);
81}
82
83/*
84 * Fv is derived from the variable frequency output. The variable frequency
85 * output is configured using this formula:
86 *
87 * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword
88 *
89 * Fv = W x 2 ^ -16 x 27Mhz (reference clock)
90 *
91 * The period is: (period + 1) / Fv and "on" time is on / (period + 1)
92 *
93 * The PWM core framework specifies that the "duty_ns" parameter is in fact the
94 * "on" time, so this translates directly into our HW programming here.
95 */
96static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
97 u64 duty_ns, u64 period_ns)
98{
99 struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
100 unsigned long pc, dc, cword = CONST_VAR_F_MAX;
101 unsigned int channel = pwm->hwpwm;
102 u32 value;
103
104 /*
105 * If asking for a duty_ns equal to period_ns, we need to substract
106 * the period value by 1 to make it shorter than the "on" time and
107 * produce a flat 100% duty cycle signal, and max out the "on" time
108 */
109 if (duty_ns == period_ns) {
110 dc = PWM_ON_PERIOD_MAX;
111 pc = PWM_ON_PERIOD_MAX - 1;
112 goto done;
113 }
114
115 while (1) {
116 u64 rate;
117
118 /*
119 * Calculate the base rate from base frequency and current
120 * cword
121 */
122 rate = (u64)clk_get_rate(p->clk) * (u64)cword;
123 rate >>= CWORD_BIT_SIZE;
124
125 pc = mul_u64_u64_div_u64(period_ns, rate, NSEC_PER_SEC);
126 dc = mul_u64_u64_div_u64(duty_ns + 1, rate, NSEC_PER_SEC);
127
128 /*
129 * We can be called with separate duty and period updates,
130 * so do not reject dc == 0 right away
131 */
132 if (pc == PWM_PERIOD_MIN || (dc < PWM_ON_MIN && duty_ns))
133 return -EINVAL;
134
135 /* We converged on a calculation */
136 if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX)
137 break;
138
139 /*
140 * The cword needs to be a power of 2 for the variable
141 * frequency generator to output a 50% duty cycle variable
142 * frequency which is used as input clock to the fixed
143 * frequency generator.
144 */
145 cword >>= 1;
146
147 /*
148 * Desired periods are too large, we do not have a divider
149 * for them
150 */
151 if (cword < CONST_VAR_F_MIN)
152 return -EINVAL;
153 }
154
155done:
156 /*
157 * Configure the defined "cword" value to have the variable frequency
158 * generator output a base frequency for the constant frequency
159 * generator to derive from.
160 */
161 brcmstb_pwm_writel(p, cword >> 8, PWM_CWORD_MSB(channel));
162 brcmstb_pwm_writel(p, cword & 0xff, PWM_CWORD_LSB(channel));
163
164 /* Select constant frequency signal output */
165 value = brcmstb_pwm_readl(p, PWM_CTRL2);
166 value |= CTRL2_OUT_SELECT << (channel * CTRL_CHAN_OFFS);
167 brcmstb_pwm_writel(p, value, PWM_CTRL2);
168
169 /* Configure on and period value */
170 brcmstb_pwm_writel(p, pc, PWM_PERIOD(channel));
171 brcmstb_pwm_writel(p, dc, PWM_ON(channel));
172
173 return 0;
174}
175
176static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm *p,
177 unsigned int channel, bool enable)
178{
179 unsigned int shift = channel * CTRL_CHAN_OFFS;
180 u32 value;
181
182 value = brcmstb_pwm_readl(p, PWM_CTRL);
183
184 if (enable) {
185 value &= ~(CTRL_OEB << shift);
186 value |= (CTRL_START | CTRL_OPENDRAIN) << shift;
187 } else {
188 value &= ~((CTRL_START | CTRL_OPENDRAIN) << shift);
189 value |= CTRL_OEB << shift;
190 }
191
192 brcmstb_pwm_writel(p, value, PWM_CTRL);
193}
194
195static int brcmstb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
196 const struct pwm_state *state)
197{
198 struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
199 int err;
200
201 if (state->polarity != PWM_POLARITY_NORMAL)
202 return -EINVAL;
203
204 if (!state->enabled) {
205 if (pwm->state.enabled)
206 brcmstb_pwm_enable_set(p, pwm->hwpwm, false);
207
208 return 0;
209 }
210
211 err = brcmstb_pwm_config(chip, pwm, state->duty_cycle, state->period);
212 if (err)
213 return err;
214
215 if (!pwm->state.enabled)
216 brcmstb_pwm_enable_set(p, pwm->hwpwm, true);
217
218 return 0;
219}
220
221static const struct pwm_ops brcmstb_pwm_ops = {
222 .apply = brcmstb_pwm_apply,
223};
224
225static const struct of_device_id brcmstb_pwm_of_match[] = {
226 { .compatible = "brcm,bcm7038-pwm", },
227 { /* sentinel */ }
228};
229MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match);
230
231static int brcmstb_pwm_probe(struct platform_device *pdev)
232{
233 struct brcmstb_pwm *p;
234 int ret;
235
236 p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
237 if (!p)
238 return -ENOMEM;
239
240 p->clk = devm_clk_get_enabled(&pdev->dev, NULL);
241 if (IS_ERR(p->clk))
242 return dev_err_probe(&pdev->dev, PTR_ERR(p->clk),
243 "failed to obtain clock\n");
244
245 platform_set_drvdata(pdev, p);
246
247 p->chip.dev = &pdev->dev;
248 p->chip.ops = &brcmstb_pwm_ops;
249 p->chip.npwm = 2;
250
251 p->base = devm_platform_ioremap_resource(pdev, 0);
252 if (IS_ERR(p->base))
253 return PTR_ERR(p->base);
254
255 ret = devm_pwmchip_add(&pdev->dev, &p->chip);
256 if (ret)
257 return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
258
259 return 0;
260}
261
262static int brcmstb_pwm_suspend(struct device *dev)
263{
264 struct brcmstb_pwm *p = dev_get_drvdata(dev);
265
266 clk_disable_unprepare(p->clk);
267
268 return 0;
269}
270
271static int brcmstb_pwm_resume(struct device *dev)
272{
273 struct brcmstb_pwm *p = dev_get_drvdata(dev);
274
275 return clk_prepare_enable(p->clk);
276}
277
278static DEFINE_SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops, brcmstb_pwm_suspend,
279 brcmstb_pwm_resume);
280
281static struct platform_driver brcmstb_pwm_driver = {
282 .probe = brcmstb_pwm_probe,
283 .driver = {
284 .name = "pwm-brcmstb",
285 .of_match_table = brcmstb_pwm_of_match,
286 .pm = pm_ptr(&brcmstb_pwm_pm_ops),
287 },
288};
289module_platform_driver(brcmstb_pwm_driver);
290
291MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
292MODULE_DESCRIPTION("Broadcom STB PWM driver");
293MODULE_ALIAS("platform:pwm-brcmstb");
294MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Broadcom BCM7038 PWM driver
4 * Author: Florian Fainelli
5 *
6 * Copyright (C) 2015 Broadcom Corporation
7 */
8
9#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
10
11#include <linux/clk.h>
12#include <linux/export.h>
13#include <linux/init.h>
14#include <linux/io.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/of.h>
18#include <linux/platform_device.h>
19#include <linux/pwm.h>
20#include <linux/spinlock.h>
21
22#define PWM_CTRL 0x00
23#define CTRL_START BIT(0)
24#define CTRL_OEB BIT(1)
25#define CTRL_FORCE_HIGH BIT(2)
26#define CTRL_OPENDRAIN BIT(3)
27#define CTRL_CHAN_OFFS 4
28
29#define PWM_CTRL2 0x04
30#define CTRL2_OUT_SELECT BIT(0)
31
32#define PWM_CH_SIZE 0x8
33
34#define PWM_CWORD_MSB(ch) (0x08 + ((ch) * PWM_CH_SIZE))
35#define PWM_CWORD_LSB(ch) (0x0c + ((ch) * PWM_CH_SIZE))
36
37/* Number of bits for the CWORD value */
38#define CWORD_BIT_SIZE 16
39
40/*
41 * Maximum control word value allowed when variable-frequency PWM is used as a
42 * clock for the constant-frequency PMW.
43 */
44#define CONST_VAR_F_MAX 32768
45#define CONST_VAR_F_MIN 1
46
47#define PWM_ON(ch) (0x18 + ((ch) * PWM_CH_SIZE))
48#define PWM_ON_MIN 1
49#define PWM_PERIOD(ch) (0x1c + ((ch) * PWM_CH_SIZE))
50#define PWM_PERIOD_MIN 0
51
52#define PWM_ON_PERIOD_MAX 0xff
53
54struct brcmstb_pwm {
55 void __iomem *base;
56 struct clk *clk;
57};
58
59static inline u32 brcmstb_pwm_readl(struct brcmstb_pwm *p,
60 unsigned int offset)
61{
62 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
63 return __raw_readl(p->base + offset);
64 else
65 return readl_relaxed(p->base + offset);
66}
67
68static inline void brcmstb_pwm_writel(struct brcmstb_pwm *p, u32 value,
69 unsigned int offset)
70{
71 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
72 __raw_writel(value, p->base + offset);
73 else
74 writel_relaxed(value, p->base + offset);
75}
76
77static inline struct brcmstb_pwm *to_brcmstb_pwm(struct pwm_chip *chip)
78{
79 return pwmchip_get_drvdata(chip);
80}
81
82/*
83 * Fv is derived from the variable frequency output. The variable frequency
84 * output is configured using this formula:
85 *
86 * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword
87 *
88 * Fv = W x 2 ^ -16 x 27Mhz (reference clock)
89 *
90 * The period is: (period + 1) / Fv and "on" time is on / (period + 1)
91 *
92 * The PWM core framework specifies that the "duty_ns" parameter is in fact the
93 * "on" time, so this translates directly into our HW programming here.
94 */
95static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
96 u64 duty_ns, u64 period_ns)
97{
98 struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
99 unsigned long pc, dc, cword = CONST_VAR_F_MAX;
100 unsigned int channel = pwm->hwpwm;
101 u32 value;
102
103 /*
104 * If asking for a duty_ns equal to period_ns, we need to substract
105 * the period value by 1 to make it shorter than the "on" time and
106 * produce a flat 100% duty cycle signal, and max out the "on" time
107 */
108 if (duty_ns == period_ns) {
109 dc = PWM_ON_PERIOD_MAX;
110 pc = PWM_ON_PERIOD_MAX - 1;
111 goto done;
112 }
113
114 while (1) {
115 u64 rate;
116
117 /*
118 * Calculate the base rate from base frequency and current
119 * cword
120 */
121 rate = (u64)clk_get_rate(p->clk) * (u64)cword;
122 rate >>= CWORD_BIT_SIZE;
123
124 pc = mul_u64_u64_div_u64(period_ns, rate, NSEC_PER_SEC);
125 dc = mul_u64_u64_div_u64(duty_ns + 1, rate, NSEC_PER_SEC);
126
127 /*
128 * We can be called with separate duty and period updates,
129 * so do not reject dc == 0 right away
130 */
131 if (pc == PWM_PERIOD_MIN || (dc < PWM_ON_MIN && duty_ns))
132 return -EINVAL;
133
134 /* We converged on a calculation */
135 if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX)
136 break;
137
138 /*
139 * The cword needs to be a power of 2 for the variable
140 * frequency generator to output a 50% duty cycle variable
141 * frequency which is used as input clock to the fixed
142 * frequency generator.
143 */
144 cword >>= 1;
145
146 /*
147 * Desired periods are too large, we do not have a divider
148 * for them
149 */
150 if (cword < CONST_VAR_F_MIN)
151 return -EINVAL;
152 }
153
154done:
155 /*
156 * Configure the defined "cword" value to have the variable frequency
157 * generator output a base frequency for the constant frequency
158 * generator to derive from.
159 */
160 brcmstb_pwm_writel(p, cword >> 8, PWM_CWORD_MSB(channel));
161 brcmstb_pwm_writel(p, cword & 0xff, PWM_CWORD_LSB(channel));
162
163 /* Select constant frequency signal output */
164 value = brcmstb_pwm_readl(p, PWM_CTRL2);
165 value |= CTRL2_OUT_SELECT << (channel * CTRL_CHAN_OFFS);
166 brcmstb_pwm_writel(p, value, PWM_CTRL2);
167
168 /* Configure on and period value */
169 brcmstb_pwm_writel(p, pc, PWM_PERIOD(channel));
170 brcmstb_pwm_writel(p, dc, PWM_ON(channel));
171
172 return 0;
173}
174
175static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm *p,
176 unsigned int channel, bool enable)
177{
178 unsigned int shift = channel * CTRL_CHAN_OFFS;
179 u32 value;
180
181 value = brcmstb_pwm_readl(p, PWM_CTRL);
182
183 if (enable) {
184 value &= ~(CTRL_OEB << shift);
185 value |= (CTRL_START | CTRL_OPENDRAIN) << shift;
186 } else {
187 value &= ~((CTRL_START | CTRL_OPENDRAIN) << shift);
188 value |= CTRL_OEB << shift;
189 }
190
191 brcmstb_pwm_writel(p, value, PWM_CTRL);
192}
193
194static int brcmstb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
195 const struct pwm_state *state)
196{
197 struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
198 int err;
199
200 if (state->polarity != PWM_POLARITY_NORMAL)
201 return -EINVAL;
202
203 if (!state->enabled) {
204 if (pwm->state.enabled)
205 brcmstb_pwm_enable_set(p, pwm->hwpwm, false);
206
207 return 0;
208 }
209
210 err = brcmstb_pwm_config(chip, pwm, state->duty_cycle, state->period);
211 if (err)
212 return err;
213
214 if (!pwm->state.enabled)
215 brcmstb_pwm_enable_set(p, pwm->hwpwm, true);
216
217 return 0;
218}
219
220static const struct pwm_ops brcmstb_pwm_ops = {
221 .apply = brcmstb_pwm_apply,
222};
223
224static const struct of_device_id brcmstb_pwm_of_match[] = {
225 { .compatible = "brcm,bcm7038-pwm", },
226 { /* sentinel */ }
227};
228MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match);
229
230static int brcmstb_pwm_probe(struct platform_device *pdev)
231{
232 struct pwm_chip *chip;
233 struct brcmstb_pwm *p;
234 int ret;
235
236 chip = devm_pwmchip_alloc(&pdev->dev, 2, sizeof(*p));
237 if (IS_ERR(chip))
238 return PTR_ERR(chip);
239 p = to_brcmstb_pwm(chip);
240
241 p->clk = devm_clk_get_enabled(&pdev->dev, NULL);
242 if (IS_ERR(p->clk))
243 return dev_err_probe(&pdev->dev, PTR_ERR(p->clk),
244 "failed to obtain clock\n");
245
246 platform_set_drvdata(pdev, p);
247
248 chip->ops = &brcmstb_pwm_ops;
249
250 p->base = devm_platform_ioremap_resource(pdev, 0);
251 if (IS_ERR(p->base))
252 return PTR_ERR(p->base);
253
254 ret = devm_pwmchip_add(&pdev->dev, chip);
255 if (ret)
256 return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
257
258 return 0;
259}
260
261static int brcmstb_pwm_suspend(struct device *dev)
262{
263 struct brcmstb_pwm *p = dev_get_drvdata(dev);
264
265 clk_disable_unprepare(p->clk);
266
267 return 0;
268}
269
270static int brcmstb_pwm_resume(struct device *dev)
271{
272 struct brcmstb_pwm *p = dev_get_drvdata(dev);
273
274 return clk_prepare_enable(p->clk);
275}
276
277static DEFINE_SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops, brcmstb_pwm_suspend,
278 brcmstb_pwm_resume);
279
280static struct platform_driver brcmstb_pwm_driver = {
281 .probe = brcmstb_pwm_probe,
282 .driver = {
283 .name = "pwm-brcmstb",
284 .of_match_table = brcmstb_pwm_of_match,
285 .pm = pm_ptr(&brcmstb_pwm_pm_ops),
286 },
287};
288module_platform_driver(brcmstb_pwm_driver);
289
290MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
291MODULE_DESCRIPTION("Broadcom STB PWM driver");
292MODULE_ALIAS("platform:pwm-brcmstb");
293MODULE_LICENSE("GPL");