Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * PIC32 Integrated Serial Driver.
4 *
5 * Copyright (C) 2015 Microchip Technology, Inc.
6 *
7 * Authors:
8 * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
9 */
10
11#include <linux/kernel.h>
12#include <linux/platform_device.h>
13#include <linux/of.h>
14#include <linux/of_irq.h>
15#include <linux/of_gpio.h>
16#include <linux/init.h>
17#include <linux/module.h>
18#include <linux/slab.h>
19#include <linux/console.h>
20#include <linux/clk.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23#include <linux/serial_core.h>
24#include <linux/delay.h>
25
26#include <asm/mach-pic32/pic32.h>
27
28/* UART name and device definitions */
29#define PIC32_DEV_NAME "pic32-uart"
30#define PIC32_MAX_UARTS 6
31#define PIC32_SDEV_NAME "ttyPIC"
32
33#define PIC32_UART_DFLT_BRATE 9600
34#define PIC32_UART_TX_FIFO_DEPTH 8
35#define PIC32_UART_RX_FIFO_DEPTH 8
36
37#define PIC32_UART_MODE 0x00
38#define PIC32_UART_STA 0x10
39#define PIC32_UART_TX 0x20
40#define PIC32_UART_RX 0x30
41#define PIC32_UART_BRG 0x40
42
43/* struct pic32_sport - pic32 serial port descriptor
44 * @port: uart port descriptor
45 * @idx: port index
46 * @irq_fault: virtual fault interrupt number
47 * @irq_fault_name: irq fault name
48 * @irq_rx: virtual rx interrupt number
49 * @irq_rx_name: irq rx name
50 * @irq_tx: virtual tx interrupt number
51 * @irq_tx_name: irq tx name
52 * @cts_gpiod: clear to send GPIO
53 * @dev: device descriptor
54 **/
55struct pic32_sport {
56 struct uart_port port;
57 int idx;
58
59 int irq_fault;
60 const char *irq_fault_name;
61 int irq_rx;
62 const char *irq_rx_name;
63 int irq_tx;
64 const char *irq_tx_name;
65 bool enable_tx_irq;
66
67 struct gpio_desc *cts_gpiod;
68
69 struct clk *clk;
70
71 struct device *dev;
72};
73
74static inline struct pic32_sport *to_pic32_sport(struct uart_port *port)
75{
76 return container_of(port, struct pic32_sport, port);
77}
78
79static inline void pic32_uart_writel(struct pic32_sport *sport,
80 u32 reg, u32 val)
81{
82 __raw_writel(val, sport->port.membase + reg);
83}
84
85static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg)
86{
87 return __raw_readl(sport->port.membase + reg);
88}
89
90/* pic32 uart mode register bits */
91#define PIC32_UART_MODE_ON BIT(15)
92#define PIC32_UART_MODE_FRZ BIT(14)
93#define PIC32_UART_MODE_SIDL BIT(13)
94#define PIC32_UART_MODE_IREN BIT(12)
95#define PIC32_UART_MODE_RTSMD BIT(11)
96#define PIC32_UART_MODE_RESV1 BIT(10)
97#define PIC32_UART_MODE_UEN1 BIT(9)
98#define PIC32_UART_MODE_UEN0 BIT(8)
99#define PIC32_UART_MODE_WAKE BIT(7)
100#define PIC32_UART_MODE_LPBK BIT(6)
101#define PIC32_UART_MODE_ABAUD BIT(5)
102#define PIC32_UART_MODE_RXINV BIT(4)
103#define PIC32_UART_MODE_BRGH BIT(3)
104#define PIC32_UART_MODE_PDSEL1 BIT(2)
105#define PIC32_UART_MODE_PDSEL0 BIT(1)
106#define PIC32_UART_MODE_STSEL BIT(0)
107
108/* pic32 uart status register bits */
109#define PIC32_UART_STA_UTXISEL1 BIT(15)
110#define PIC32_UART_STA_UTXISEL0 BIT(14)
111#define PIC32_UART_STA_UTXINV BIT(13)
112#define PIC32_UART_STA_URXEN BIT(12)
113#define PIC32_UART_STA_UTXBRK BIT(11)
114#define PIC32_UART_STA_UTXEN BIT(10)
115#define PIC32_UART_STA_UTXBF BIT(9)
116#define PIC32_UART_STA_TRMT BIT(8)
117#define PIC32_UART_STA_URXISEL1 BIT(7)
118#define PIC32_UART_STA_URXISEL0 BIT(6)
119#define PIC32_UART_STA_ADDEN BIT(5)
120#define PIC32_UART_STA_RIDLE BIT(4)
121#define PIC32_UART_STA_PERR BIT(3)
122#define PIC32_UART_STA_FERR BIT(2)
123#define PIC32_UART_STA_OERR BIT(1)
124#define PIC32_UART_STA_URXDA BIT(0)
125
126/* pic32_sport pointer for console use */
127static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS];
128
129static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport)
130{
131 /* wait for tx empty, otherwise chars will be lost or corrupted */
132 while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT))
133 udelay(1);
134}
135
136/* serial core request to check if uart tx buffer is empty */
137static unsigned int pic32_uart_tx_empty(struct uart_port *port)
138{
139 struct pic32_sport *sport = to_pic32_sport(port);
140 u32 val = pic32_uart_readl(sport, PIC32_UART_STA);
141
142 return (val & PIC32_UART_STA_TRMT) ? 1 : 0;
143}
144
145/* serial core request to set UART outputs */
146static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
147{
148 struct pic32_sport *sport = to_pic32_sport(port);
149
150 /* set loopback mode */
151 if (mctrl & TIOCM_LOOP)
152 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
153 PIC32_UART_MODE_LPBK);
154 else
155 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
156 PIC32_UART_MODE_LPBK);
157}
158
159/* serial core request to return the state of misc UART input pins */
160static unsigned int pic32_uart_get_mctrl(struct uart_port *port)
161{
162 struct pic32_sport *sport = to_pic32_sport(port);
163 unsigned int mctrl = 0;
164
165 /* get the state of CTS input pin for this port */
166 if (!sport->cts_gpiod)
167 mctrl |= TIOCM_CTS;
168 else if (gpiod_get_value(sport->cts_gpiod))
169 mctrl |= TIOCM_CTS;
170
171 /* DSR and CD are not supported in PIC32, so return 1
172 * RI is not supported in PIC32, so return 0
173 */
174 mctrl |= TIOCM_CD;
175 mctrl |= TIOCM_DSR;
176
177 return mctrl;
178}
179
180/* stop tx and start tx are not called in pairs, therefore a flag indicates
181 * the status of irq to control the irq-depth.
182 */
183static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en)
184{
185 if (en && !sport->enable_tx_irq) {
186 enable_irq(sport->irq_tx);
187 sport->enable_tx_irq = true;
188 } else if (!en && sport->enable_tx_irq) {
189 /* use disable_irq_nosync() and not disable_irq() to avoid self
190 * imposed deadlock by not waiting for irq handler to end,
191 * since this callback is called from interrupt context.
192 */
193 disable_irq_nosync(sport->irq_tx);
194 sport->enable_tx_irq = false;
195 }
196}
197
198/* serial core request to disable tx ASAP (used for flow control) */
199static void pic32_uart_stop_tx(struct uart_port *port)
200{
201 struct pic32_sport *sport = to_pic32_sport(port);
202
203 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
204 return;
205
206 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
207 return;
208
209 /* wait for tx empty */
210 pic32_wait_deplete_txbuf(sport);
211
212 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
213 PIC32_UART_STA_UTXEN);
214 pic32_uart_irqtxen(sport, 0);
215}
216
217/* serial core request to (re)enable tx */
218static void pic32_uart_start_tx(struct uart_port *port)
219{
220 struct pic32_sport *sport = to_pic32_sport(port);
221
222 pic32_uart_irqtxen(sport, 1);
223 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
224 PIC32_UART_STA_UTXEN);
225}
226
227/* serial core request to stop rx, called before port shutdown */
228static void pic32_uart_stop_rx(struct uart_port *port)
229{
230 struct pic32_sport *sport = to_pic32_sport(port);
231
232 /* disable rx interrupts */
233 disable_irq(sport->irq_rx);
234
235 /* receiver Enable bit OFF */
236 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
237 PIC32_UART_STA_URXEN);
238}
239
240/* serial core request to start/stop emitting break char */
241static void pic32_uart_break_ctl(struct uart_port *port, int ctl)
242{
243 struct pic32_sport *sport = to_pic32_sport(port);
244 unsigned long flags;
245
246 uart_port_lock_irqsave(port, &flags);
247
248 if (ctl)
249 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
250 PIC32_UART_STA_UTXBRK);
251 else
252 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
253 PIC32_UART_STA_UTXBRK);
254
255 uart_port_unlock_irqrestore(port, flags);
256}
257
258/* get port type in string format */
259static const char *pic32_uart_type(struct uart_port *port)
260{
261 return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL;
262}
263
264/* read all chars in rx fifo and send them to core */
265static void pic32_uart_do_rx(struct uart_port *port)
266{
267 struct pic32_sport *sport = to_pic32_sport(port);
268 struct tty_port *tty;
269 unsigned int max_count;
270
271 /* limit number of char read in interrupt, should not be
272 * higher than fifo size anyway since we're much faster than
273 * serial port
274 */
275 max_count = PIC32_UART_RX_FIFO_DEPTH;
276
277 uart_port_lock(port);
278
279 tty = &port->state->port;
280
281 do {
282 u32 sta_reg, c;
283 char flag;
284
285 /* get overrun/fifo empty information from status register */
286 sta_reg = pic32_uart_readl(sport, PIC32_UART_STA);
287 if (unlikely(sta_reg & PIC32_UART_STA_OERR)) {
288
289 /* fifo reset is required to clear interrupt */
290 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
291 PIC32_UART_STA_OERR);
292
293 port->icount.overrun++;
294 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
295 }
296
297 /* Can at least one more character can be read? */
298 if (!(sta_reg & PIC32_UART_STA_URXDA))
299 break;
300
301 /* read the character and increment the rx counter */
302 c = pic32_uart_readl(sport, PIC32_UART_RX);
303
304 port->icount.rx++;
305 flag = TTY_NORMAL;
306 c &= 0xff;
307
308 if (unlikely((sta_reg & PIC32_UART_STA_PERR) ||
309 (sta_reg & PIC32_UART_STA_FERR))) {
310
311 /* do stats first */
312 if (sta_reg & PIC32_UART_STA_PERR)
313 port->icount.parity++;
314 if (sta_reg & PIC32_UART_STA_FERR)
315 port->icount.frame++;
316
317 /* update flag wrt read_status_mask */
318 sta_reg &= port->read_status_mask;
319
320 if (sta_reg & PIC32_UART_STA_FERR)
321 flag = TTY_FRAME;
322 if (sta_reg & PIC32_UART_STA_PERR)
323 flag = TTY_PARITY;
324 }
325
326 if (uart_handle_sysrq_char(port, c))
327 continue;
328
329 if ((sta_reg & port->ignore_status_mask) == 0)
330 tty_insert_flip_char(tty, c, flag);
331
332 } while (--max_count);
333
334 uart_port_unlock(port);
335
336 tty_flip_buffer_push(tty);
337}
338
339/* fill tx fifo with chars to send, stop when fifo is about to be full
340 * or when all chars have been sent.
341 */
342static void pic32_uart_do_tx(struct uart_port *port)
343{
344 struct pic32_sport *sport = to_pic32_sport(port);
345 struct circ_buf *xmit = &port->state->xmit;
346 unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH;
347
348 if (port->x_char) {
349 pic32_uart_writel(sport, PIC32_UART_TX, port->x_char);
350 port->icount.tx++;
351 port->x_char = 0;
352 return;
353 }
354
355 if (uart_tx_stopped(port)) {
356 pic32_uart_stop_tx(port);
357 return;
358 }
359
360 if (uart_circ_empty(xmit))
361 goto txq_empty;
362
363 /* keep stuffing chars into uart tx buffer
364 * 1) until uart fifo is full
365 * or
366 * 2) until the circ buffer is empty
367 * (all chars have been sent)
368 * or
369 * 3) until the max count is reached
370 * (prevents lingering here for too long in certain cases)
371 */
372 while (!(PIC32_UART_STA_UTXBF &
373 pic32_uart_readl(sport, PIC32_UART_STA))) {
374 unsigned int c = xmit->buf[xmit->tail];
375
376 pic32_uart_writel(sport, PIC32_UART_TX, c);
377
378 uart_xmit_advance(port, 1);
379 if (uart_circ_empty(xmit))
380 break;
381 if (--max_count == 0)
382 break;
383 }
384
385 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
386 uart_write_wakeup(port);
387
388 if (uart_circ_empty(xmit))
389 goto txq_empty;
390
391 return;
392
393txq_empty:
394 pic32_uart_irqtxen(sport, 0);
395}
396
397/* RX interrupt handler */
398static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id)
399{
400 struct uart_port *port = dev_id;
401
402 pic32_uart_do_rx(port);
403
404 return IRQ_HANDLED;
405}
406
407/* TX interrupt handler */
408static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id)
409{
410 struct uart_port *port = dev_id;
411 unsigned long flags;
412
413 uart_port_lock_irqsave(port, &flags);
414 pic32_uart_do_tx(port);
415 uart_port_unlock_irqrestore(port, flags);
416
417 return IRQ_HANDLED;
418}
419
420/* FAULT interrupt handler */
421static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id)
422{
423 /* do nothing: pic32_uart_do_rx() handles faults. */
424 return IRQ_HANDLED;
425}
426
427/* enable rx & tx operation on uart */
428static void pic32_uart_en_and_unmask(struct uart_port *port)
429{
430 struct pic32_sport *sport = to_pic32_sport(port);
431
432 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
433 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
434 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
435 PIC32_UART_MODE_ON);
436}
437
438/* disable rx & tx operation on uart */
439static void pic32_uart_dsbl_and_mask(struct uart_port *port)
440{
441 struct pic32_sport *sport = to_pic32_sport(port);
442
443 /* wait for tx empty, otherwise chars will be lost or corrupted */
444 pic32_wait_deplete_txbuf(sport);
445
446 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
447 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
448 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
449 PIC32_UART_MODE_ON);
450}
451
452/* serial core request to initialize uart and start rx operation */
453static int pic32_uart_startup(struct uart_port *port)
454{
455 struct pic32_sport *sport = to_pic32_sport(port);
456 u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1;
457 unsigned long flags;
458 int ret;
459
460 local_irq_save(flags);
461
462 ret = clk_prepare_enable(sport->clk);
463 if (ret) {
464 local_irq_restore(flags);
465 goto out_done;
466 }
467
468 /* clear status and mode registers */
469 pic32_uart_writel(sport, PIC32_UART_MODE, 0);
470 pic32_uart_writel(sport, PIC32_UART_STA, 0);
471
472 /* disable uart and mask all interrupts */
473 pic32_uart_dsbl_and_mask(port);
474
475 /* set default baud */
476 pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud);
477
478 local_irq_restore(flags);
479
480 /* Each UART of a PIC32 has three interrupts therefore,
481 * we setup driver to register the 3 irqs for the device.
482 *
483 * For each irq request_irq() is called with interrupt disabled.
484 * And the irq is enabled as soon as we are ready to handle them.
485 */
486 sport->enable_tx_irq = false;
487
488 sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault",
489 pic32_uart_type(port),
490 sport->idx);
491 if (!sport->irq_fault_name) {
492 dev_err(port->dev, "%s: kasprintf err!", __func__);
493 ret = -ENOMEM;
494 goto out_disable_clk;
495 }
496 irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
497 ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
498 IRQF_NO_THREAD, sport->irq_fault_name, port);
499 if (ret) {
500 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
501 __func__, sport->irq_fault, ret,
502 pic32_uart_type(port));
503 goto out_f;
504 }
505
506 sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx",
507 pic32_uart_type(port),
508 sport->idx);
509 if (!sport->irq_rx_name) {
510 dev_err(port->dev, "%s: kasprintf err!", __func__);
511 ret = -ENOMEM;
512 goto out_f;
513 }
514 irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN);
515 ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt,
516 IRQF_NO_THREAD, sport->irq_rx_name, port);
517 if (ret) {
518 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
519 __func__, sport->irq_rx, ret,
520 pic32_uart_type(port));
521 goto out_r;
522 }
523
524 sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx",
525 pic32_uart_type(port),
526 sport->idx);
527 if (!sport->irq_tx_name) {
528 dev_err(port->dev, "%s: kasprintf err!", __func__);
529 ret = -ENOMEM;
530 goto out_r;
531 }
532 irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN);
533 ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt,
534 IRQF_NO_THREAD, sport->irq_tx_name, port);
535 if (ret) {
536 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
537 __func__, sport->irq_tx, ret,
538 pic32_uart_type(port));
539 goto out_t;
540 }
541
542 local_irq_save(flags);
543
544 /* set rx interrupt on first receive */
545 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
546 PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0);
547
548 /* set interrupt on empty */
549 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
550 PIC32_UART_STA_UTXISEL1);
551
552 /* enable all interrupts and eanable uart */
553 pic32_uart_en_and_unmask(port);
554
555 local_irq_restore(flags);
556
557 enable_irq(sport->irq_rx);
558
559 return 0;
560
561out_t:
562 free_irq(sport->irq_tx, port);
563 kfree(sport->irq_tx_name);
564out_r:
565 free_irq(sport->irq_rx, port);
566 kfree(sport->irq_rx_name);
567out_f:
568 free_irq(sport->irq_fault, port);
569 kfree(sport->irq_fault_name);
570out_disable_clk:
571 clk_disable_unprepare(sport->clk);
572out_done:
573 return ret;
574}
575
576/* serial core request to flush & disable uart */
577static void pic32_uart_shutdown(struct uart_port *port)
578{
579 struct pic32_sport *sport = to_pic32_sport(port);
580 unsigned long flags;
581
582 /* disable uart */
583 uart_port_lock_irqsave(port, &flags);
584 pic32_uart_dsbl_and_mask(port);
585 uart_port_unlock_irqrestore(port, flags);
586 clk_disable_unprepare(sport->clk);
587
588 /* free all 3 interrupts for this UART */
589 free_irq(sport->irq_fault, port);
590 kfree(sport->irq_fault_name);
591 free_irq(sport->irq_tx, port);
592 kfree(sport->irq_tx_name);
593 free_irq(sport->irq_rx, port);
594 kfree(sport->irq_rx_name);
595}
596
597/* serial core request to change current uart setting */
598static void pic32_uart_set_termios(struct uart_port *port,
599 struct ktermios *new,
600 const struct ktermios *old)
601{
602 struct pic32_sport *sport = to_pic32_sport(port);
603 unsigned int baud;
604 unsigned int quot;
605 unsigned long flags;
606
607 uart_port_lock_irqsave(port, &flags);
608
609 /* disable uart and mask all interrupts while changing speed */
610 pic32_uart_dsbl_and_mask(port);
611
612 /* stop bit options */
613 if (new->c_cflag & CSTOPB)
614 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
615 PIC32_UART_MODE_STSEL);
616 else
617 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
618 PIC32_UART_MODE_STSEL);
619
620 /* parity options */
621 if (new->c_cflag & PARENB) {
622 if (new->c_cflag & PARODD) {
623 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
624 PIC32_UART_MODE_PDSEL1);
625 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
626 PIC32_UART_MODE_PDSEL0);
627 } else {
628 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
629 PIC32_UART_MODE_PDSEL0);
630 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
631 PIC32_UART_MODE_PDSEL1);
632 }
633 } else {
634 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
635 PIC32_UART_MODE_PDSEL1 |
636 PIC32_UART_MODE_PDSEL0);
637 }
638 /* if hw flow ctrl, then the pins must be specified in device tree */
639 if ((new->c_cflag & CRTSCTS) && sport->cts_gpiod) {
640 /* enable hardware flow control */
641 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
642 PIC32_UART_MODE_UEN1);
643 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
644 PIC32_UART_MODE_UEN0);
645 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
646 PIC32_UART_MODE_RTSMD);
647 } else {
648 /* disable hardware flow control */
649 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
650 PIC32_UART_MODE_UEN1);
651 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
652 PIC32_UART_MODE_UEN0);
653 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
654 PIC32_UART_MODE_RTSMD);
655 }
656
657 /* Always 8-bit */
658 new->c_cflag |= CS8;
659
660 /* Mark/Space parity is not supported */
661 new->c_cflag &= ~CMSPAR;
662
663 /* update baud */
664 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
665 quot = uart_get_divisor(port, baud) - 1;
666 pic32_uart_writel(sport, PIC32_UART_BRG, quot);
667 uart_update_timeout(port, new->c_cflag, baud);
668
669 if (tty_termios_baud_rate(new))
670 tty_termios_encode_baud_rate(new, baud, baud);
671
672 /* enable uart */
673 pic32_uart_en_and_unmask(port);
674
675 uart_port_unlock_irqrestore(port, flags);
676}
677
678/* serial core request to claim uart iomem */
679static int pic32_uart_request_port(struct uart_port *port)
680{
681 struct platform_device *pdev = to_platform_device(port->dev);
682 struct resource *res_mem;
683
684 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
685 if (unlikely(!res_mem))
686 return -EINVAL;
687
688 if (!request_mem_region(port->mapbase, resource_size(res_mem),
689 "pic32_uart_mem"))
690 return -EBUSY;
691
692 port->membase = devm_ioremap(port->dev, port->mapbase,
693 resource_size(res_mem));
694 if (!port->membase) {
695 dev_err(port->dev, "Unable to map registers\n");
696 release_mem_region(port->mapbase, resource_size(res_mem));
697 return -ENOMEM;
698 }
699
700 return 0;
701}
702
703/* serial core request to release uart iomem */
704static void pic32_uart_release_port(struct uart_port *port)
705{
706 struct platform_device *pdev = to_platform_device(port->dev);
707 struct resource *res_mem;
708 unsigned int res_size;
709
710 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
711 if (unlikely(!res_mem))
712 return;
713 res_size = resource_size(res_mem);
714
715 release_mem_region(port->mapbase, res_size);
716}
717
718/* serial core request to do any port required auto-configuration */
719static void pic32_uart_config_port(struct uart_port *port, int flags)
720{
721 if (flags & UART_CONFIG_TYPE) {
722 if (pic32_uart_request_port(port))
723 return;
724 port->type = PORT_PIC32;
725 }
726}
727
728/* serial core request to check that port information in serinfo are suitable */
729static int pic32_uart_verify_port(struct uart_port *port,
730 struct serial_struct *serinfo)
731{
732 if (port->type != PORT_PIC32)
733 return -EINVAL;
734 if (port->irq != serinfo->irq)
735 return -EINVAL;
736 if (port->iotype != serinfo->io_type)
737 return -EINVAL;
738 if (port->mapbase != (unsigned long)serinfo->iomem_base)
739 return -EINVAL;
740
741 return 0;
742}
743
744/* serial core callbacks */
745static const struct uart_ops pic32_uart_ops = {
746 .tx_empty = pic32_uart_tx_empty,
747 .get_mctrl = pic32_uart_get_mctrl,
748 .set_mctrl = pic32_uart_set_mctrl,
749 .start_tx = pic32_uart_start_tx,
750 .stop_tx = pic32_uart_stop_tx,
751 .stop_rx = pic32_uart_stop_rx,
752 .break_ctl = pic32_uart_break_ctl,
753 .startup = pic32_uart_startup,
754 .shutdown = pic32_uart_shutdown,
755 .set_termios = pic32_uart_set_termios,
756 .type = pic32_uart_type,
757 .release_port = pic32_uart_release_port,
758 .request_port = pic32_uart_request_port,
759 .config_port = pic32_uart_config_port,
760 .verify_port = pic32_uart_verify_port,
761};
762
763#ifdef CONFIG_SERIAL_PIC32_CONSOLE
764/* output given char */
765static void pic32_console_putchar(struct uart_port *port, unsigned char ch)
766{
767 struct pic32_sport *sport = to_pic32_sport(port);
768
769 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
770 return;
771
772 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
773 return;
774
775 /* wait for tx empty */
776 pic32_wait_deplete_txbuf(sport);
777
778 pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff);
779}
780
781/* console core request to output given string */
782static void pic32_console_write(struct console *co, const char *s,
783 unsigned int count)
784{
785 struct pic32_sport *sport = pic32_sports[co->index];
786
787 /* call uart helper to deal with \r\n */
788 uart_console_write(&sport->port, s, count, pic32_console_putchar);
789}
790
791/* console core request to setup given console, find matching uart
792 * port and setup it.
793 */
794static int pic32_console_setup(struct console *co, char *options)
795{
796 struct pic32_sport *sport;
797 int baud = 115200;
798 int bits = 8;
799 int parity = 'n';
800 int flow = 'n';
801 int ret = 0;
802
803 if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS))
804 return -ENODEV;
805
806 sport = pic32_sports[co->index];
807 if (!sport)
808 return -ENODEV;
809
810 ret = clk_prepare_enable(sport->clk);
811 if (ret)
812 return ret;
813
814 if (options)
815 uart_parse_options(options, &baud, &parity, &bits, &flow);
816
817 return uart_set_options(&sport->port, co, baud, parity, bits, flow);
818}
819
820static struct uart_driver pic32_uart_driver;
821static struct console pic32_console = {
822 .name = PIC32_SDEV_NAME,
823 .write = pic32_console_write,
824 .device = uart_console_device,
825 .setup = pic32_console_setup,
826 .flags = CON_PRINTBUFFER,
827 .index = -1,
828 .data = &pic32_uart_driver,
829};
830#define PIC32_SCONSOLE (&pic32_console)
831
832static int __init pic32_console_init(void)
833{
834 register_console(&pic32_console);
835 return 0;
836}
837console_initcall(pic32_console_init);
838
839/*
840 * Late console initialization.
841 */
842static int __init pic32_late_console_init(void)
843{
844 if (!console_is_registered(&pic32_console))
845 register_console(&pic32_console);
846
847 return 0;
848}
849
850core_initcall(pic32_late_console_init);
851
852#else
853#define PIC32_SCONSOLE NULL
854#endif
855
856static struct uart_driver pic32_uart_driver = {
857 .owner = THIS_MODULE,
858 .driver_name = PIC32_DEV_NAME,
859 .dev_name = PIC32_SDEV_NAME,
860 .nr = PIC32_MAX_UARTS,
861 .cons = PIC32_SCONSOLE,
862};
863
864static int pic32_uart_probe(struct platform_device *pdev)
865{
866 struct device *dev = &pdev->dev;
867 struct device_node *np = dev->of_node;
868 struct pic32_sport *sport;
869 int uart_idx = 0;
870 struct resource *res_mem;
871 struct uart_port *port;
872 int ret;
873
874 uart_idx = of_alias_get_id(np, "serial");
875 if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS)
876 return -EINVAL;
877
878 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
879 if (!res_mem)
880 return -EINVAL;
881
882 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
883 if (!sport)
884 return -ENOMEM;
885
886 sport->idx = uart_idx;
887 sport->irq_fault = irq_of_parse_and_map(np, 0);
888 sport->irq_rx = irq_of_parse_and_map(np, 1);
889 sport->irq_tx = irq_of_parse_and_map(np, 2);
890 sport->clk = devm_clk_get(&pdev->dev, NULL);
891 if (IS_ERR(sport->clk))
892 return PTR_ERR(sport->clk);
893 sport->dev = &pdev->dev;
894
895 /* Hardware flow control: gpios
896 * !Note: Basically, CTS is needed for reading the status.
897 */
898 sport->cts_gpiod = devm_gpiod_get_optional(dev, "cts", GPIOD_IN);
899 if (IS_ERR(sport->cts_gpiod))
900 return dev_err_probe(dev, PTR_ERR(sport->cts_gpiod), "error requesting CTS GPIO\n");
901 gpiod_set_consumer_name(sport->cts_gpiod, "CTS");
902
903 pic32_sports[uart_idx] = sport;
904 port = &sport->port;
905 port->iotype = UPIO_MEM;
906 port->mapbase = res_mem->start;
907 port->ops = &pic32_uart_ops;
908 port->flags = UPF_BOOT_AUTOCONF;
909 port->dev = &pdev->dev;
910 port->fifosize = PIC32_UART_TX_FIFO_DEPTH;
911 port->uartclk = clk_get_rate(sport->clk);
912 port->line = uart_idx;
913
914 ret = uart_add_one_port(&pic32_uart_driver, port);
915 if (ret) {
916 port->membase = NULL;
917 dev_err(port->dev, "%s: uart add port error!\n", __func__);
918 goto err;
919 }
920
921#ifdef CONFIG_SERIAL_PIC32_CONSOLE
922 if (uart_console_registered(port)) {
923 /* The peripheral clock has been enabled by console_setup,
924 * so disable it till the port is used.
925 */
926 clk_disable_unprepare(sport->clk);
927 }
928#endif
929
930 platform_set_drvdata(pdev, port);
931
932 dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n",
933 __func__, uart_idx);
934
935 return 0;
936err:
937 /* automatic unroll of sport and gpios */
938 return ret;
939}
940
941static void pic32_uart_remove(struct platform_device *pdev)
942{
943 struct uart_port *port = platform_get_drvdata(pdev);
944 struct pic32_sport *sport = to_pic32_sport(port);
945
946 uart_remove_one_port(&pic32_uart_driver, port);
947 clk_disable_unprepare(sport->clk);
948 platform_set_drvdata(pdev, NULL);
949 pic32_sports[sport->idx] = NULL;
950}
951
952static const struct of_device_id pic32_serial_dt_ids[] = {
953 { .compatible = "microchip,pic32mzda-uart" },
954 { /* sentinel */ }
955};
956MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
957
958static struct platform_driver pic32_uart_platform_driver = {
959 .probe = pic32_uart_probe,
960 .remove_new = pic32_uart_remove,
961 .driver = {
962 .name = PIC32_DEV_NAME,
963 .of_match_table = of_match_ptr(pic32_serial_dt_ids),
964 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32),
965 },
966};
967
968static int __init pic32_uart_init(void)
969{
970 int ret;
971
972 ret = uart_register_driver(&pic32_uart_driver);
973 if (ret) {
974 pr_err("failed to register %s:%d\n",
975 pic32_uart_driver.driver_name, ret);
976 return ret;
977 }
978
979 ret = platform_driver_register(&pic32_uart_platform_driver);
980 if (ret) {
981 pr_err("fail to register pic32 uart\n");
982 uart_unregister_driver(&pic32_uart_driver);
983 }
984
985 return ret;
986}
987arch_initcall(pic32_uart_init);
988
989static void __exit pic32_uart_exit(void)
990{
991#ifdef CONFIG_SERIAL_PIC32_CONSOLE
992 unregister_console(&pic32_console);
993#endif
994 platform_driver_unregister(&pic32_uart_platform_driver);
995 uart_unregister_driver(&pic32_uart_driver);
996}
997module_exit(pic32_uart_exit);
998
999MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>");
1000MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver");
1001MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * PIC32 Integrated Serial Driver.
4 *
5 * Copyright (C) 2015 Microchip Technology, Inc.
6 *
7 * Authors:
8 * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
9 */
10
11#include <linux/kernel.h>
12#include <linux/platform_device.h>
13#include <linux/of.h>
14#include <linux/of_device.h>
15#include <linux/of_irq.h>
16#include <linux/of_gpio.h>
17#include <linux/init.h>
18#include <linux/module.h>
19#include <linux/slab.h>
20#include <linux/console.h>
21#include <linux/clk.h>
22#include <linux/tty.h>
23#include <linux/tty_flip.h>
24#include <linux/serial_core.h>
25#include <linux/delay.h>
26
27#include <asm/mach-pic32/pic32.h>
28#include "pic32_uart.h"
29
30/* UART name and device definitions */
31#define PIC32_DEV_NAME "pic32-uart"
32#define PIC32_MAX_UARTS 6
33#define PIC32_SDEV_NAME "ttyPIC"
34
35/* pic32_sport pointer for console use */
36static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS];
37
38static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport)
39{
40 /* wait for tx empty, otherwise chars will be lost or corrupted */
41 while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT))
42 udelay(1);
43}
44
45static inline int pic32_enable_clock(struct pic32_sport *sport)
46{
47 int ret = clk_prepare_enable(sport->clk);
48
49 if (ret)
50 return ret;
51
52 sport->ref_clk++;
53 return 0;
54}
55
56static inline void pic32_disable_clock(struct pic32_sport *sport)
57{
58 sport->ref_clk--;
59 clk_disable_unprepare(sport->clk);
60}
61
62/* serial core request to check if uart tx buffer is empty */
63static unsigned int pic32_uart_tx_empty(struct uart_port *port)
64{
65 struct pic32_sport *sport = to_pic32_sport(port);
66 u32 val = pic32_uart_readl(sport, PIC32_UART_STA);
67
68 return (val & PIC32_UART_STA_TRMT) ? 1 : 0;
69}
70
71/* serial core request to set UART outputs */
72static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
73{
74 struct pic32_sport *sport = to_pic32_sport(port);
75
76 /* set loopback mode */
77 if (mctrl & TIOCM_LOOP)
78 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
79 PIC32_UART_MODE_LPBK);
80 else
81 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
82 PIC32_UART_MODE_LPBK);
83}
84
85/* get the state of CTS input pin for this port */
86static unsigned int get_cts_state(struct pic32_sport *sport)
87{
88 /* read and invert UxCTS */
89 if (gpio_is_valid(sport->cts_gpio))
90 return !gpio_get_value(sport->cts_gpio);
91
92 return 1;
93}
94
95/* serial core request to return the state of misc UART input pins */
96static unsigned int pic32_uart_get_mctrl(struct uart_port *port)
97{
98 struct pic32_sport *sport = to_pic32_sport(port);
99 unsigned int mctrl = 0;
100
101 if (!sport->hw_flow_ctrl)
102 mctrl |= TIOCM_CTS;
103 else if (get_cts_state(sport))
104 mctrl |= TIOCM_CTS;
105
106 /* DSR and CD are not supported in PIC32, so return 1
107 * RI is not supported in PIC32, so return 0
108 */
109 mctrl |= TIOCM_CD;
110 mctrl |= TIOCM_DSR;
111
112 return mctrl;
113}
114
115/* stop tx and start tx are not called in pairs, therefore a flag indicates
116 * the status of irq to control the irq-depth.
117 */
118static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en)
119{
120 if (en && !tx_irq_enabled(sport)) {
121 enable_irq(sport->irq_tx);
122 tx_irq_enabled(sport) = 1;
123 } else if (!en && tx_irq_enabled(sport)) {
124 /* use disable_irq_nosync() and not disable_irq() to avoid self
125 * imposed deadlock by not waiting for irq handler to end,
126 * since this callback is called from interrupt context.
127 */
128 disable_irq_nosync(sport->irq_tx);
129 tx_irq_enabled(sport) = 0;
130 }
131}
132
133/* serial core request to disable tx ASAP (used for flow control) */
134static void pic32_uart_stop_tx(struct uart_port *port)
135{
136 struct pic32_sport *sport = to_pic32_sport(port);
137
138 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
139 return;
140
141 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
142 return;
143
144 /* wait for tx empty */
145 pic32_wait_deplete_txbuf(sport);
146
147 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
148 PIC32_UART_STA_UTXEN);
149 pic32_uart_irqtxen(sport, 0);
150}
151
152/* serial core request to (re)enable tx */
153static void pic32_uart_start_tx(struct uart_port *port)
154{
155 struct pic32_sport *sport = to_pic32_sport(port);
156
157 pic32_uart_irqtxen(sport, 1);
158 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
159 PIC32_UART_STA_UTXEN);
160}
161
162/* serial core request to stop rx, called before port shutdown */
163static void pic32_uart_stop_rx(struct uart_port *port)
164{
165 struct pic32_sport *sport = to_pic32_sport(port);
166
167 /* disable rx interrupts */
168 disable_irq(sport->irq_rx);
169
170 /* receiver Enable bit OFF */
171 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
172 PIC32_UART_STA_URXEN);
173}
174
175/* serial core request to start/stop emitting break char */
176static void pic32_uart_break_ctl(struct uart_port *port, int ctl)
177{
178 struct pic32_sport *sport = to_pic32_sport(port);
179 unsigned long flags;
180
181 spin_lock_irqsave(&port->lock, flags);
182
183 if (ctl)
184 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
185 PIC32_UART_STA_UTXBRK);
186 else
187 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
188 PIC32_UART_STA_UTXBRK);
189
190 spin_unlock_irqrestore(&port->lock, flags);
191}
192
193/* get port type in string format */
194static const char *pic32_uart_type(struct uart_port *port)
195{
196 return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL;
197}
198
199/* read all chars in rx fifo and send them to core */
200static void pic32_uart_do_rx(struct uart_port *port)
201{
202 struct pic32_sport *sport = to_pic32_sport(port);
203 struct tty_port *tty;
204 unsigned int max_count;
205
206 /* limit number of char read in interrupt, should not be
207 * higher than fifo size anyway since we're much faster than
208 * serial port
209 */
210 max_count = PIC32_UART_RX_FIFO_DEPTH;
211
212 spin_lock(&port->lock);
213
214 tty = &port->state->port;
215
216 do {
217 u32 sta_reg, c;
218 char flag;
219
220 /* get overrun/fifo empty information from status register */
221 sta_reg = pic32_uart_readl(sport, PIC32_UART_STA);
222 if (unlikely(sta_reg & PIC32_UART_STA_OERR)) {
223
224 /* fifo reset is required to clear interrupt */
225 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
226 PIC32_UART_STA_OERR);
227
228 port->icount.overrun++;
229 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
230 }
231
232 /* Can at least one more character can be read? */
233 if (!(sta_reg & PIC32_UART_STA_URXDA))
234 break;
235
236 /* read the character and increment the rx counter */
237 c = pic32_uart_readl(sport, PIC32_UART_RX);
238
239 port->icount.rx++;
240 flag = TTY_NORMAL;
241 c &= 0xff;
242
243 if (unlikely((sta_reg & PIC32_UART_STA_PERR) ||
244 (sta_reg & PIC32_UART_STA_FERR))) {
245
246 /* do stats first */
247 if (sta_reg & PIC32_UART_STA_PERR)
248 port->icount.parity++;
249 if (sta_reg & PIC32_UART_STA_FERR)
250 port->icount.frame++;
251
252 /* update flag wrt read_status_mask */
253 sta_reg &= port->read_status_mask;
254
255 if (sta_reg & PIC32_UART_STA_FERR)
256 flag = TTY_FRAME;
257 if (sta_reg & PIC32_UART_STA_PERR)
258 flag = TTY_PARITY;
259 }
260
261 if (uart_handle_sysrq_char(port, c))
262 continue;
263
264 if ((sta_reg & port->ignore_status_mask) == 0)
265 tty_insert_flip_char(tty, c, flag);
266
267 } while (--max_count);
268
269 spin_unlock(&port->lock);
270
271 tty_flip_buffer_push(tty);
272}
273
274/* fill tx fifo with chars to send, stop when fifo is about to be full
275 * or when all chars have been sent.
276 */
277static void pic32_uart_do_tx(struct uart_port *port)
278{
279 struct pic32_sport *sport = to_pic32_sport(port);
280 struct circ_buf *xmit = &port->state->xmit;
281 unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH;
282
283 if (port->x_char) {
284 pic32_uart_writel(sport, PIC32_UART_TX, port->x_char);
285 port->icount.tx++;
286 port->x_char = 0;
287 return;
288 }
289
290 if (uart_tx_stopped(port)) {
291 pic32_uart_stop_tx(port);
292 return;
293 }
294
295 if (uart_circ_empty(xmit))
296 goto txq_empty;
297
298 /* keep stuffing chars into uart tx buffer
299 * 1) until uart fifo is full
300 * or
301 * 2) until the circ buffer is empty
302 * (all chars have been sent)
303 * or
304 * 3) until the max count is reached
305 * (prevents lingering here for too long in certain cases)
306 */
307 while (!(PIC32_UART_STA_UTXBF &
308 pic32_uart_readl(sport, PIC32_UART_STA))) {
309 unsigned int c = xmit->buf[xmit->tail];
310
311 pic32_uart_writel(sport, PIC32_UART_TX, c);
312
313 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
314 port->icount.tx++;
315 if (uart_circ_empty(xmit))
316 break;
317 if (--max_count == 0)
318 break;
319 }
320
321 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
322 uart_write_wakeup(port);
323
324 if (uart_circ_empty(xmit))
325 goto txq_empty;
326
327 return;
328
329txq_empty:
330 pic32_uart_irqtxen(sport, 0);
331}
332
333/* RX interrupt handler */
334static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id)
335{
336 struct uart_port *port = dev_id;
337
338 pic32_uart_do_rx(port);
339
340 return IRQ_HANDLED;
341}
342
343/* TX interrupt handler */
344static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id)
345{
346 struct uart_port *port = dev_id;
347 unsigned long flags;
348
349 spin_lock_irqsave(&port->lock, flags);
350 pic32_uart_do_tx(port);
351 spin_unlock_irqrestore(&port->lock, flags);
352
353 return IRQ_HANDLED;
354}
355
356/* FAULT interrupt handler */
357static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id)
358{
359 /* do nothing: pic32_uart_do_rx() handles faults. */
360 return IRQ_HANDLED;
361}
362
363/* enable rx & tx operation on uart */
364static void pic32_uart_en_and_unmask(struct uart_port *port)
365{
366 struct pic32_sport *sport = to_pic32_sport(port);
367
368 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
369 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
370 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
371 PIC32_UART_MODE_ON);
372}
373
374/* disable rx & tx operation on uart */
375static void pic32_uart_dsbl_and_mask(struct uart_port *port)
376{
377 struct pic32_sport *sport = to_pic32_sport(port);
378
379 /* wait for tx empty, otherwise chars will be lost or corrupted */
380 pic32_wait_deplete_txbuf(sport);
381
382 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
383 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
384 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
385 PIC32_UART_MODE_ON);
386}
387
388/* serial core request to initialize uart and start rx operation */
389static int pic32_uart_startup(struct uart_port *port)
390{
391 struct pic32_sport *sport = to_pic32_sport(port);
392 u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1;
393 unsigned long flags;
394 int ret;
395
396 local_irq_save(flags);
397
398 ret = pic32_enable_clock(sport);
399 if (ret) {
400 local_irq_restore(flags);
401 goto out_done;
402 }
403
404 /* clear status and mode registers */
405 pic32_uart_writel(sport, PIC32_UART_MODE, 0);
406 pic32_uart_writel(sport, PIC32_UART_STA, 0);
407
408 /* disable uart and mask all interrupts */
409 pic32_uart_dsbl_and_mask(port);
410
411 /* set default baud */
412 pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud);
413
414 local_irq_restore(flags);
415
416 /* Each UART of a PIC32 has three interrupts therefore,
417 * we setup driver to register the 3 irqs for the device.
418 *
419 * For each irq request_irq() is called with interrupt disabled.
420 * And the irq is enabled as soon as we are ready to handle them.
421 */
422 tx_irq_enabled(sport) = 0;
423
424 sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault",
425 pic32_uart_type(port),
426 sport->idx);
427 if (!sport->irq_fault_name) {
428 dev_err(port->dev, "%s: kasprintf err!", __func__);
429 ret = -ENOMEM;
430 goto out_done;
431 }
432 irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
433 ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
434 sport->irqflags_fault, sport->irq_fault_name, port);
435 if (ret) {
436 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
437 __func__, sport->irq_fault, ret,
438 pic32_uart_type(port));
439 goto out_f;
440 }
441
442 sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx",
443 pic32_uart_type(port),
444 sport->idx);
445 if (!sport->irq_rx_name) {
446 dev_err(port->dev, "%s: kasprintf err!", __func__);
447 ret = -ENOMEM;
448 goto out_f;
449 }
450 irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN);
451 ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt,
452 sport->irqflags_rx, sport->irq_rx_name, port);
453 if (ret) {
454 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
455 __func__, sport->irq_rx, ret,
456 pic32_uart_type(port));
457 goto out_r;
458 }
459
460 sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx",
461 pic32_uart_type(port),
462 sport->idx);
463 if (!sport->irq_tx_name) {
464 dev_err(port->dev, "%s: kasprintf err!", __func__);
465 ret = -ENOMEM;
466 goto out_r;
467 }
468 irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN);
469 ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt,
470 sport->irqflags_tx, sport->irq_tx_name, port);
471 if (ret) {
472 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
473 __func__, sport->irq_tx, ret,
474 pic32_uart_type(port));
475 goto out_t;
476 }
477
478 local_irq_save(flags);
479
480 /* set rx interrupt on first receive */
481 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
482 PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0);
483
484 /* set interrupt on empty */
485 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
486 PIC32_UART_STA_UTXISEL1);
487
488 /* enable all interrupts and eanable uart */
489 pic32_uart_en_and_unmask(port);
490
491 enable_irq(sport->irq_rx);
492
493 return 0;
494
495out_t:
496 kfree(sport->irq_tx_name);
497 free_irq(sport->irq_tx, port);
498out_r:
499 kfree(sport->irq_rx_name);
500 free_irq(sport->irq_rx, port);
501out_f:
502 kfree(sport->irq_fault_name);
503 free_irq(sport->irq_fault, port);
504out_done:
505 return ret;
506}
507
508/* serial core request to flush & disable uart */
509static void pic32_uart_shutdown(struct uart_port *port)
510{
511 struct pic32_sport *sport = to_pic32_sport(port);
512 unsigned long flags;
513
514 /* disable uart */
515 spin_lock_irqsave(&port->lock, flags);
516 pic32_uart_dsbl_and_mask(port);
517 spin_unlock_irqrestore(&port->lock, flags);
518 pic32_disable_clock(sport);
519
520 /* free all 3 interrupts for this UART */
521 free_irq(sport->irq_fault, port);
522 free_irq(sport->irq_tx, port);
523 free_irq(sport->irq_rx, port);
524}
525
526/* serial core request to change current uart setting */
527static void pic32_uart_set_termios(struct uart_port *port,
528 struct ktermios *new,
529 struct ktermios *old)
530{
531 struct pic32_sport *sport = to_pic32_sport(port);
532 unsigned int baud;
533 unsigned int quot;
534 unsigned long flags;
535
536 spin_lock_irqsave(&port->lock, flags);
537
538 /* disable uart and mask all interrupts while changing speed */
539 pic32_uart_dsbl_and_mask(port);
540
541 /* stop bit options */
542 if (new->c_cflag & CSTOPB)
543 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
544 PIC32_UART_MODE_STSEL);
545 else
546 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
547 PIC32_UART_MODE_STSEL);
548
549 /* parity options */
550 if (new->c_cflag & PARENB) {
551 if (new->c_cflag & PARODD) {
552 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
553 PIC32_UART_MODE_PDSEL1);
554 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
555 PIC32_UART_MODE_PDSEL0);
556 } else {
557 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
558 PIC32_UART_MODE_PDSEL0);
559 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
560 PIC32_UART_MODE_PDSEL1);
561 }
562 } else {
563 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
564 PIC32_UART_MODE_PDSEL1 |
565 PIC32_UART_MODE_PDSEL0);
566 }
567 /* if hw flow ctrl, then the pins must be specified in device tree */
568 if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) {
569 /* enable hardware flow control */
570 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
571 PIC32_UART_MODE_UEN1);
572 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
573 PIC32_UART_MODE_UEN0);
574 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
575 PIC32_UART_MODE_RTSMD);
576 } else {
577 /* disable hardware flow control */
578 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
579 PIC32_UART_MODE_UEN1);
580 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
581 PIC32_UART_MODE_UEN0);
582 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
583 PIC32_UART_MODE_RTSMD);
584 }
585
586 /* Always 8-bit */
587 new->c_cflag |= CS8;
588
589 /* Mark/Space parity is not supported */
590 new->c_cflag &= ~CMSPAR;
591
592 /* update baud */
593 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
594 quot = uart_get_divisor(port, baud) - 1;
595 pic32_uart_writel(sport, PIC32_UART_BRG, quot);
596 uart_update_timeout(port, new->c_cflag, baud);
597
598 if (tty_termios_baud_rate(new))
599 tty_termios_encode_baud_rate(new, baud, baud);
600
601 /* enable uart */
602 pic32_uart_en_and_unmask(port);
603
604 spin_unlock_irqrestore(&port->lock, flags);
605}
606
607/* serial core request to claim uart iomem */
608static int pic32_uart_request_port(struct uart_port *port)
609{
610 struct platform_device *pdev = to_platform_device(port->dev);
611 struct resource *res_mem;
612
613 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
614 if (unlikely(!res_mem))
615 return -EINVAL;
616
617 if (!request_mem_region(port->mapbase, resource_size(res_mem),
618 "pic32_uart_mem"))
619 return -EBUSY;
620
621 port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
622 resource_size(res_mem));
623 if (!port->membase) {
624 dev_err(port->dev, "Unable to map registers\n");
625 release_mem_region(port->mapbase, resource_size(res_mem));
626 return -ENOMEM;
627 }
628
629 return 0;
630}
631
632/* serial core request to release uart iomem */
633static void pic32_uart_release_port(struct uart_port *port)
634{
635 struct platform_device *pdev = to_platform_device(port->dev);
636 struct resource *res_mem;
637 unsigned int res_size;
638
639 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
640 if (unlikely(!res_mem))
641 return;
642 res_size = resource_size(res_mem);
643
644 release_mem_region(port->mapbase, res_size);
645}
646
647/* serial core request to do any port required auto-configuration */
648static void pic32_uart_config_port(struct uart_port *port, int flags)
649{
650 if (flags & UART_CONFIG_TYPE) {
651 if (pic32_uart_request_port(port))
652 return;
653 port->type = PORT_PIC32;
654 }
655}
656
657/* serial core request to check that port information in serinfo are suitable */
658static int pic32_uart_verify_port(struct uart_port *port,
659 struct serial_struct *serinfo)
660{
661 if (port->type != PORT_PIC32)
662 return -EINVAL;
663 if (port->irq != serinfo->irq)
664 return -EINVAL;
665 if (port->iotype != serinfo->io_type)
666 return -EINVAL;
667 if (port->mapbase != (unsigned long)serinfo->iomem_base)
668 return -EINVAL;
669
670 return 0;
671}
672
673/* serial core callbacks */
674static const struct uart_ops pic32_uart_ops = {
675 .tx_empty = pic32_uart_tx_empty,
676 .get_mctrl = pic32_uart_get_mctrl,
677 .set_mctrl = pic32_uart_set_mctrl,
678 .start_tx = pic32_uart_start_tx,
679 .stop_tx = pic32_uart_stop_tx,
680 .stop_rx = pic32_uart_stop_rx,
681 .break_ctl = pic32_uart_break_ctl,
682 .startup = pic32_uart_startup,
683 .shutdown = pic32_uart_shutdown,
684 .set_termios = pic32_uart_set_termios,
685 .type = pic32_uart_type,
686 .release_port = pic32_uart_release_port,
687 .request_port = pic32_uart_request_port,
688 .config_port = pic32_uart_config_port,
689 .verify_port = pic32_uart_verify_port,
690};
691
692#ifdef CONFIG_SERIAL_PIC32_CONSOLE
693/* output given char */
694static void pic32_console_putchar(struct uart_port *port, int ch)
695{
696 struct pic32_sport *sport = to_pic32_sport(port);
697
698 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
699 return;
700
701 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
702 return;
703
704 /* wait for tx empty */
705 pic32_wait_deplete_txbuf(sport);
706
707 pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff);
708}
709
710/* console core request to output given string */
711static void pic32_console_write(struct console *co, const char *s,
712 unsigned int count)
713{
714 struct pic32_sport *sport = pic32_sports[co->index];
715 struct uart_port *port = pic32_get_port(sport);
716
717 /* call uart helper to deal with \r\n */
718 uart_console_write(port, s, count, pic32_console_putchar);
719}
720
721/* console core request to setup given console, find matching uart
722 * port and setup it.
723 */
724static int pic32_console_setup(struct console *co, char *options)
725{
726 struct pic32_sport *sport;
727 struct uart_port *port = NULL;
728 int baud = 115200;
729 int bits = 8;
730 int parity = 'n';
731 int flow = 'n';
732 int ret = 0;
733
734 if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS))
735 return -ENODEV;
736
737 sport = pic32_sports[co->index];
738 if (!sport)
739 return -ENODEV;
740 port = pic32_get_port(sport);
741
742 ret = pic32_enable_clock(sport);
743 if (ret)
744 return ret;
745
746 if (options)
747 uart_parse_options(options, &baud, &parity, &bits, &flow);
748
749 return uart_set_options(port, co, baud, parity, bits, flow);
750}
751
752static struct uart_driver pic32_uart_driver;
753static struct console pic32_console = {
754 .name = PIC32_SDEV_NAME,
755 .write = pic32_console_write,
756 .device = uart_console_device,
757 .setup = pic32_console_setup,
758 .flags = CON_PRINTBUFFER,
759 .index = -1,
760 .data = &pic32_uart_driver,
761};
762#define PIC32_SCONSOLE (&pic32_console)
763
764static int __init pic32_console_init(void)
765{
766 register_console(&pic32_console);
767 return 0;
768}
769console_initcall(pic32_console_init);
770
771static inline bool is_pic32_console_port(struct uart_port *port)
772{
773 return port->cons && port->cons->index == port->line;
774}
775
776/*
777 * Late console initialization.
778 */
779static int __init pic32_late_console_init(void)
780{
781 if (!(pic32_console.flags & CON_ENABLED))
782 register_console(&pic32_console);
783
784 return 0;
785}
786
787core_initcall(pic32_late_console_init);
788
789#else
790#define PIC32_SCONSOLE NULL
791#endif
792
793static struct uart_driver pic32_uart_driver = {
794 .owner = THIS_MODULE,
795 .driver_name = PIC32_DEV_NAME,
796 .dev_name = PIC32_SDEV_NAME,
797 .nr = PIC32_MAX_UARTS,
798 .cons = PIC32_SCONSOLE,
799};
800
801static int pic32_uart_probe(struct platform_device *pdev)
802{
803 struct device_node *np = pdev->dev.of_node;
804 struct pic32_sport *sport;
805 int uart_idx = 0;
806 struct resource *res_mem;
807 struct uart_port *port;
808 int ret;
809
810 uart_idx = of_alias_get_id(np, "serial");
811 if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS)
812 return -EINVAL;
813
814 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
815 if (!res_mem)
816 return -EINVAL;
817
818 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
819 if (!sport)
820 return -ENOMEM;
821
822 sport->idx = uart_idx;
823 sport->irq_fault = irq_of_parse_and_map(np, 0);
824 sport->irqflags_fault = IRQF_NO_THREAD;
825 sport->irq_rx = irq_of_parse_and_map(np, 1);
826 sport->irqflags_rx = IRQF_NO_THREAD;
827 sport->irq_tx = irq_of_parse_and_map(np, 2);
828 sport->irqflags_tx = IRQF_NO_THREAD;
829 sport->clk = devm_clk_get(&pdev->dev, NULL);
830 sport->cts_gpio = -EINVAL;
831 sport->dev = &pdev->dev;
832
833 /* Hardware flow control: gpios
834 * !Note: Basically, CTS is needed for reading the status.
835 */
836 sport->hw_flow_ctrl = false;
837 sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0);
838 if (gpio_is_valid(sport->cts_gpio)) {
839 sport->hw_flow_ctrl = true;
840
841 ret = devm_gpio_request(sport->dev,
842 sport->cts_gpio, "CTS");
843 if (ret) {
844 dev_err(&pdev->dev,
845 "error requesting CTS GPIO\n");
846 goto err;
847 }
848
849 ret = gpio_direction_input(sport->cts_gpio);
850 if (ret) {
851 dev_err(&pdev->dev, "error setting CTS GPIO\n");
852 goto err;
853 }
854 }
855
856 pic32_sports[uart_idx] = sport;
857 port = &sport->port;
858 memset(port, 0, sizeof(*port));
859 port->iotype = UPIO_MEM;
860 port->mapbase = res_mem->start;
861 port->ops = &pic32_uart_ops;
862 port->flags = UPF_BOOT_AUTOCONF;
863 port->dev = &pdev->dev;
864 port->fifosize = PIC32_UART_TX_FIFO_DEPTH;
865 port->uartclk = clk_get_rate(sport->clk);
866 port->line = uart_idx;
867
868 ret = uart_add_one_port(&pic32_uart_driver, port);
869 if (ret) {
870 port->membase = NULL;
871 dev_err(port->dev, "%s: uart add port error!\n", __func__);
872 goto err;
873 }
874
875#ifdef CONFIG_SERIAL_PIC32_CONSOLE
876 if (is_pic32_console_port(port) &&
877 (pic32_console.flags & CON_ENABLED)) {
878 /* The peripheral clock has been enabled by console_setup,
879 * so disable it till the port is used.
880 */
881 pic32_disable_clock(sport);
882 }
883#endif
884
885 platform_set_drvdata(pdev, port);
886
887 dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n",
888 __func__, uart_idx);
889
890 return 0;
891err:
892 /* automatic unroll of sport and gpios */
893 return ret;
894}
895
896static int pic32_uart_remove(struct platform_device *pdev)
897{
898 struct uart_port *port = platform_get_drvdata(pdev);
899 struct pic32_sport *sport = to_pic32_sport(port);
900
901 uart_remove_one_port(&pic32_uart_driver, port);
902 pic32_disable_clock(sport);
903 platform_set_drvdata(pdev, NULL);
904 pic32_sports[sport->idx] = NULL;
905
906 /* automatic unroll of sport and gpios */
907 return 0;
908}
909
910static const struct of_device_id pic32_serial_dt_ids[] = {
911 { .compatible = "microchip,pic32mzda-uart" },
912 { /* sentinel */ }
913};
914MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
915
916static struct platform_driver pic32_uart_platform_driver = {
917 .probe = pic32_uart_probe,
918 .remove = pic32_uart_remove,
919 .driver = {
920 .name = PIC32_DEV_NAME,
921 .of_match_table = of_match_ptr(pic32_serial_dt_ids),
922 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32),
923 },
924};
925
926static int __init pic32_uart_init(void)
927{
928 int ret;
929
930 ret = uart_register_driver(&pic32_uart_driver);
931 if (ret) {
932 pr_err("failed to register %s:%d\n",
933 pic32_uart_driver.driver_name, ret);
934 return ret;
935 }
936
937 ret = platform_driver_register(&pic32_uart_platform_driver);
938 if (ret) {
939 pr_err("fail to register pic32 uart\n");
940 uart_unregister_driver(&pic32_uart_driver);
941 }
942
943 return ret;
944}
945arch_initcall(pic32_uart_init);
946
947static void __exit pic32_uart_exit(void)
948{
949#ifdef CONFIG_SERIAL_PIC32_CONSOLE
950 unregister_console(&pic32_console);
951#endif
952 platform_driver_unregister(&pic32_uart_platform_driver);
953 uart_unregister_driver(&pic32_uart_driver);
954}
955module_exit(pic32_uart_exit);
956
957MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>");
958MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver");
959MODULE_LICENSE("GPL v2");