Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * PIC32 Integrated Serial Driver.
4 *
5 * Copyright (C) 2015 Microchip Technology, Inc.
6 *
7 * Authors:
8 * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
9 */
10
11#include <linux/kernel.h>
12#include <linux/platform_device.h>
13#include <linux/of.h>
14#include <linux/of_irq.h>
15#include <linux/of_gpio.h>
16#include <linux/init.h>
17#include <linux/module.h>
18#include <linux/slab.h>
19#include <linux/console.h>
20#include <linux/clk.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23#include <linux/serial_core.h>
24#include <linux/delay.h>
25
26#include <asm/mach-pic32/pic32.h>
27
28/* UART name and device definitions */
29#define PIC32_DEV_NAME "pic32-uart"
30#define PIC32_MAX_UARTS 6
31#define PIC32_SDEV_NAME "ttyPIC"
32
33#define PIC32_UART_DFLT_BRATE 9600
34#define PIC32_UART_TX_FIFO_DEPTH 8
35#define PIC32_UART_RX_FIFO_DEPTH 8
36
37#define PIC32_UART_MODE 0x00
38#define PIC32_UART_STA 0x10
39#define PIC32_UART_TX 0x20
40#define PIC32_UART_RX 0x30
41#define PIC32_UART_BRG 0x40
42
43/* struct pic32_sport - pic32 serial port descriptor
44 * @port: uart port descriptor
45 * @idx: port index
46 * @irq_fault: virtual fault interrupt number
47 * @irq_fault_name: irq fault name
48 * @irq_rx: virtual rx interrupt number
49 * @irq_rx_name: irq rx name
50 * @irq_tx: virtual tx interrupt number
51 * @irq_tx_name: irq tx name
52 * @cts_gpiod: clear to send GPIO
53 * @dev: device descriptor
54 **/
55struct pic32_sport {
56 struct uart_port port;
57 int idx;
58
59 int irq_fault;
60 const char *irq_fault_name;
61 int irq_rx;
62 const char *irq_rx_name;
63 int irq_tx;
64 const char *irq_tx_name;
65 bool enable_tx_irq;
66
67 struct gpio_desc *cts_gpiod;
68
69 struct clk *clk;
70
71 struct device *dev;
72};
73
74static inline struct pic32_sport *to_pic32_sport(struct uart_port *port)
75{
76 return container_of(port, struct pic32_sport, port);
77}
78
79static inline void pic32_uart_writel(struct pic32_sport *sport,
80 u32 reg, u32 val)
81{
82 __raw_writel(val, sport->port.membase + reg);
83}
84
85static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg)
86{
87 return __raw_readl(sport->port.membase + reg);
88}
89
90/* pic32 uart mode register bits */
91#define PIC32_UART_MODE_ON BIT(15)
92#define PIC32_UART_MODE_FRZ BIT(14)
93#define PIC32_UART_MODE_SIDL BIT(13)
94#define PIC32_UART_MODE_IREN BIT(12)
95#define PIC32_UART_MODE_RTSMD BIT(11)
96#define PIC32_UART_MODE_RESV1 BIT(10)
97#define PIC32_UART_MODE_UEN1 BIT(9)
98#define PIC32_UART_MODE_UEN0 BIT(8)
99#define PIC32_UART_MODE_WAKE BIT(7)
100#define PIC32_UART_MODE_LPBK BIT(6)
101#define PIC32_UART_MODE_ABAUD BIT(5)
102#define PIC32_UART_MODE_RXINV BIT(4)
103#define PIC32_UART_MODE_BRGH BIT(3)
104#define PIC32_UART_MODE_PDSEL1 BIT(2)
105#define PIC32_UART_MODE_PDSEL0 BIT(1)
106#define PIC32_UART_MODE_STSEL BIT(0)
107
108/* pic32 uart status register bits */
109#define PIC32_UART_STA_UTXISEL1 BIT(15)
110#define PIC32_UART_STA_UTXISEL0 BIT(14)
111#define PIC32_UART_STA_UTXINV BIT(13)
112#define PIC32_UART_STA_URXEN BIT(12)
113#define PIC32_UART_STA_UTXBRK BIT(11)
114#define PIC32_UART_STA_UTXEN BIT(10)
115#define PIC32_UART_STA_UTXBF BIT(9)
116#define PIC32_UART_STA_TRMT BIT(8)
117#define PIC32_UART_STA_URXISEL1 BIT(7)
118#define PIC32_UART_STA_URXISEL0 BIT(6)
119#define PIC32_UART_STA_ADDEN BIT(5)
120#define PIC32_UART_STA_RIDLE BIT(4)
121#define PIC32_UART_STA_PERR BIT(3)
122#define PIC32_UART_STA_FERR BIT(2)
123#define PIC32_UART_STA_OERR BIT(1)
124#define PIC32_UART_STA_URXDA BIT(0)
125
126/* pic32_sport pointer for console use */
127static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS];
128
129static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport)
130{
131 /* wait for tx empty, otherwise chars will be lost or corrupted */
132 while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT))
133 udelay(1);
134}
135
136/* serial core request to check if uart tx buffer is empty */
137static unsigned int pic32_uart_tx_empty(struct uart_port *port)
138{
139 struct pic32_sport *sport = to_pic32_sport(port);
140 u32 val = pic32_uart_readl(sport, PIC32_UART_STA);
141
142 return (val & PIC32_UART_STA_TRMT) ? 1 : 0;
143}
144
145/* serial core request to set UART outputs */
146static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
147{
148 struct pic32_sport *sport = to_pic32_sport(port);
149
150 /* set loopback mode */
151 if (mctrl & TIOCM_LOOP)
152 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
153 PIC32_UART_MODE_LPBK);
154 else
155 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
156 PIC32_UART_MODE_LPBK);
157}
158
159/* serial core request to return the state of misc UART input pins */
160static unsigned int pic32_uart_get_mctrl(struct uart_port *port)
161{
162 struct pic32_sport *sport = to_pic32_sport(port);
163 unsigned int mctrl = 0;
164
165 /* get the state of CTS input pin for this port */
166 if (!sport->cts_gpiod)
167 mctrl |= TIOCM_CTS;
168 else if (gpiod_get_value(sport->cts_gpiod))
169 mctrl |= TIOCM_CTS;
170
171 /* DSR and CD are not supported in PIC32, so return 1
172 * RI is not supported in PIC32, so return 0
173 */
174 mctrl |= TIOCM_CD;
175 mctrl |= TIOCM_DSR;
176
177 return mctrl;
178}
179
180/* stop tx and start tx are not called in pairs, therefore a flag indicates
181 * the status of irq to control the irq-depth.
182 */
183static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en)
184{
185 if (en && !sport->enable_tx_irq) {
186 enable_irq(sport->irq_tx);
187 sport->enable_tx_irq = true;
188 } else if (!en && sport->enable_tx_irq) {
189 /* use disable_irq_nosync() and not disable_irq() to avoid self
190 * imposed deadlock by not waiting for irq handler to end,
191 * since this callback is called from interrupt context.
192 */
193 disable_irq_nosync(sport->irq_tx);
194 sport->enable_tx_irq = false;
195 }
196}
197
198/* serial core request to disable tx ASAP (used for flow control) */
199static void pic32_uart_stop_tx(struct uart_port *port)
200{
201 struct pic32_sport *sport = to_pic32_sport(port);
202
203 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
204 return;
205
206 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
207 return;
208
209 /* wait for tx empty */
210 pic32_wait_deplete_txbuf(sport);
211
212 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
213 PIC32_UART_STA_UTXEN);
214 pic32_uart_irqtxen(sport, 0);
215}
216
217/* serial core request to (re)enable tx */
218static void pic32_uart_start_tx(struct uart_port *port)
219{
220 struct pic32_sport *sport = to_pic32_sport(port);
221
222 pic32_uart_irqtxen(sport, 1);
223 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
224 PIC32_UART_STA_UTXEN);
225}
226
227/* serial core request to stop rx, called before port shutdown */
228static void pic32_uart_stop_rx(struct uart_port *port)
229{
230 struct pic32_sport *sport = to_pic32_sport(port);
231
232 /* disable rx interrupts */
233 disable_irq(sport->irq_rx);
234
235 /* receiver Enable bit OFF */
236 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
237 PIC32_UART_STA_URXEN);
238}
239
240/* serial core request to start/stop emitting break char */
241static void pic32_uart_break_ctl(struct uart_port *port, int ctl)
242{
243 struct pic32_sport *sport = to_pic32_sport(port);
244 unsigned long flags;
245
246 uart_port_lock_irqsave(port, &flags);
247
248 if (ctl)
249 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
250 PIC32_UART_STA_UTXBRK);
251 else
252 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
253 PIC32_UART_STA_UTXBRK);
254
255 uart_port_unlock_irqrestore(port, flags);
256}
257
258/* get port type in string format */
259static const char *pic32_uart_type(struct uart_port *port)
260{
261 return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL;
262}
263
264/* read all chars in rx fifo and send them to core */
265static void pic32_uart_do_rx(struct uart_port *port)
266{
267 struct pic32_sport *sport = to_pic32_sport(port);
268 struct tty_port *tty;
269 unsigned int max_count;
270
271 /* limit number of char read in interrupt, should not be
272 * higher than fifo size anyway since we're much faster than
273 * serial port
274 */
275 max_count = PIC32_UART_RX_FIFO_DEPTH;
276
277 uart_port_lock(port);
278
279 tty = &port->state->port;
280
281 do {
282 u32 sta_reg, c;
283 char flag;
284
285 /* get overrun/fifo empty information from status register */
286 sta_reg = pic32_uart_readl(sport, PIC32_UART_STA);
287 if (unlikely(sta_reg & PIC32_UART_STA_OERR)) {
288
289 /* fifo reset is required to clear interrupt */
290 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
291 PIC32_UART_STA_OERR);
292
293 port->icount.overrun++;
294 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
295 }
296
297 /* Can at least one more character can be read? */
298 if (!(sta_reg & PIC32_UART_STA_URXDA))
299 break;
300
301 /* read the character and increment the rx counter */
302 c = pic32_uart_readl(sport, PIC32_UART_RX);
303
304 port->icount.rx++;
305 flag = TTY_NORMAL;
306 c &= 0xff;
307
308 if (unlikely((sta_reg & PIC32_UART_STA_PERR) ||
309 (sta_reg & PIC32_UART_STA_FERR))) {
310
311 /* do stats first */
312 if (sta_reg & PIC32_UART_STA_PERR)
313 port->icount.parity++;
314 if (sta_reg & PIC32_UART_STA_FERR)
315 port->icount.frame++;
316
317 /* update flag wrt read_status_mask */
318 sta_reg &= port->read_status_mask;
319
320 if (sta_reg & PIC32_UART_STA_FERR)
321 flag = TTY_FRAME;
322 if (sta_reg & PIC32_UART_STA_PERR)
323 flag = TTY_PARITY;
324 }
325
326 if (uart_handle_sysrq_char(port, c))
327 continue;
328
329 if ((sta_reg & port->ignore_status_mask) == 0)
330 tty_insert_flip_char(tty, c, flag);
331
332 } while (--max_count);
333
334 uart_port_unlock(port);
335
336 tty_flip_buffer_push(tty);
337}
338
339/* fill tx fifo with chars to send, stop when fifo is about to be full
340 * or when all chars have been sent.
341 */
342static void pic32_uart_do_tx(struct uart_port *port)
343{
344 struct pic32_sport *sport = to_pic32_sport(port);
345 struct circ_buf *xmit = &port->state->xmit;
346 unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH;
347
348 if (port->x_char) {
349 pic32_uart_writel(sport, PIC32_UART_TX, port->x_char);
350 port->icount.tx++;
351 port->x_char = 0;
352 return;
353 }
354
355 if (uart_tx_stopped(port)) {
356 pic32_uart_stop_tx(port);
357 return;
358 }
359
360 if (uart_circ_empty(xmit))
361 goto txq_empty;
362
363 /* keep stuffing chars into uart tx buffer
364 * 1) until uart fifo is full
365 * or
366 * 2) until the circ buffer is empty
367 * (all chars have been sent)
368 * or
369 * 3) until the max count is reached
370 * (prevents lingering here for too long in certain cases)
371 */
372 while (!(PIC32_UART_STA_UTXBF &
373 pic32_uart_readl(sport, PIC32_UART_STA))) {
374 unsigned int c = xmit->buf[xmit->tail];
375
376 pic32_uart_writel(sport, PIC32_UART_TX, c);
377
378 uart_xmit_advance(port, 1);
379 if (uart_circ_empty(xmit))
380 break;
381 if (--max_count == 0)
382 break;
383 }
384
385 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
386 uart_write_wakeup(port);
387
388 if (uart_circ_empty(xmit))
389 goto txq_empty;
390
391 return;
392
393txq_empty:
394 pic32_uart_irqtxen(sport, 0);
395}
396
397/* RX interrupt handler */
398static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id)
399{
400 struct uart_port *port = dev_id;
401
402 pic32_uart_do_rx(port);
403
404 return IRQ_HANDLED;
405}
406
407/* TX interrupt handler */
408static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id)
409{
410 struct uart_port *port = dev_id;
411 unsigned long flags;
412
413 uart_port_lock_irqsave(port, &flags);
414 pic32_uart_do_tx(port);
415 uart_port_unlock_irqrestore(port, flags);
416
417 return IRQ_HANDLED;
418}
419
420/* FAULT interrupt handler */
421static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id)
422{
423 /* do nothing: pic32_uart_do_rx() handles faults. */
424 return IRQ_HANDLED;
425}
426
427/* enable rx & tx operation on uart */
428static void pic32_uart_en_and_unmask(struct uart_port *port)
429{
430 struct pic32_sport *sport = to_pic32_sport(port);
431
432 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
433 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
434 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
435 PIC32_UART_MODE_ON);
436}
437
438/* disable rx & tx operation on uart */
439static void pic32_uart_dsbl_and_mask(struct uart_port *port)
440{
441 struct pic32_sport *sport = to_pic32_sport(port);
442
443 /* wait for tx empty, otherwise chars will be lost or corrupted */
444 pic32_wait_deplete_txbuf(sport);
445
446 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
447 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
448 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
449 PIC32_UART_MODE_ON);
450}
451
452/* serial core request to initialize uart and start rx operation */
453static int pic32_uart_startup(struct uart_port *port)
454{
455 struct pic32_sport *sport = to_pic32_sport(port);
456 u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1;
457 unsigned long flags;
458 int ret;
459
460 local_irq_save(flags);
461
462 ret = clk_prepare_enable(sport->clk);
463 if (ret) {
464 local_irq_restore(flags);
465 goto out_done;
466 }
467
468 /* clear status and mode registers */
469 pic32_uart_writel(sport, PIC32_UART_MODE, 0);
470 pic32_uart_writel(sport, PIC32_UART_STA, 0);
471
472 /* disable uart and mask all interrupts */
473 pic32_uart_dsbl_and_mask(port);
474
475 /* set default baud */
476 pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud);
477
478 local_irq_restore(flags);
479
480 /* Each UART of a PIC32 has three interrupts therefore,
481 * we setup driver to register the 3 irqs for the device.
482 *
483 * For each irq request_irq() is called with interrupt disabled.
484 * And the irq is enabled as soon as we are ready to handle them.
485 */
486 sport->enable_tx_irq = false;
487
488 sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault",
489 pic32_uart_type(port),
490 sport->idx);
491 if (!sport->irq_fault_name) {
492 dev_err(port->dev, "%s: kasprintf err!", __func__);
493 ret = -ENOMEM;
494 goto out_disable_clk;
495 }
496 irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
497 ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
498 IRQF_NO_THREAD, sport->irq_fault_name, port);
499 if (ret) {
500 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
501 __func__, sport->irq_fault, ret,
502 pic32_uart_type(port));
503 goto out_f;
504 }
505
506 sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx",
507 pic32_uart_type(port),
508 sport->idx);
509 if (!sport->irq_rx_name) {
510 dev_err(port->dev, "%s: kasprintf err!", __func__);
511 ret = -ENOMEM;
512 goto out_f;
513 }
514 irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN);
515 ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt,
516 IRQF_NO_THREAD, sport->irq_rx_name, port);
517 if (ret) {
518 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
519 __func__, sport->irq_rx, ret,
520 pic32_uart_type(port));
521 goto out_r;
522 }
523
524 sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx",
525 pic32_uart_type(port),
526 sport->idx);
527 if (!sport->irq_tx_name) {
528 dev_err(port->dev, "%s: kasprintf err!", __func__);
529 ret = -ENOMEM;
530 goto out_r;
531 }
532 irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN);
533 ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt,
534 IRQF_NO_THREAD, sport->irq_tx_name, port);
535 if (ret) {
536 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
537 __func__, sport->irq_tx, ret,
538 pic32_uart_type(port));
539 goto out_t;
540 }
541
542 local_irq_save(flags);
543
544 /* set rx interrupt on first receive */
545 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
546 PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0);
547
548 /* set interrupt on empty */
549 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
550 PIC32_UART_STA_UTXISEL1);
551
552 /* enable all interrupts and eanable uart */
553 pic32_uart_en_and_unmask(port);
554
555 local_irq_restore(flags);
556
557 enable_irq(sport->irq_rx);
558
559 return 0;
560
561out_t:
562 free_irq(sport->irq_tx, port);
563 kfree(sport->irq_tx_name);
564out_r:
565 free_irq(sport->irq_rx, port);
566 kfree(sport->irq_rx_name);
567out_f:
568 free_irq(sport->irq_fault, port);
569 kfree(sport->irq_fault_name);
570out_disable_clk:
571 clk_disable_unprepare(sport->clk);
572out_done:
573 return ret;
574}
575
576/* serial core request to flush & disable uart */
577static void pic32_uart_shutdown(struct uart_port *port)
578{
579 struct pic32_sport *sport = to_pic32_sport(port);
580 unsigned long flags;
581
582 /* disable uart */
583 uart_port_lock_irqsave(port, &flags);
584 pic32_uart_dsbl_and_mask(port);
585 uart_port_unlock_irqrestore(port, flags);
586 clk_disable_unprepare(sport->clk);
587
588 /* free all 3 interrupts for this UART */
589 free_irq(sport->irq_fault, port);
590 kfree(sport->irq_fault_name);
591 free_irq(sport->irq_tx, port);
592 kfree(sport->irq_tx_name);
593 free_irq(sport->irq_rx, port);
594 kfree(sport->irq_rx_name);
595}
596
597/* serial core request to change current uart setting */
598static void pic32_uart_set_termios(struct uart_port *port,
599 struct ktermios *new,
600 const struct ktermios *old)
601{
602 struct pic32_sport *sport = to_pic32_sport(port);
603 unsigned int baud;
604 unsigned int quot;
605 unsigned long flags;
606
607 uart_port_lock_irqsave(port, &flags);
608
609 /* disable uart and mask all interrupts while changing speed */
610 pic32_uart_dsbl_and_mask(port);
611
612 /* stop bit options */
613 if (new->c_cflag & CSTOPB)
614 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
615 PIC32_UART_MODE_STSEL);
616 else
617 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
618 PIC32_UART_MODE_STSEL);
619
620 /* parity options */
621 if (new->c_cflag & PARENB) {
622 if (new->c_cflag & PARODD) {
623 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
624 PIC32_UART_MODE_PDSEL1);
625 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
626 PIC32_UART_MODE_PDSEL0);
627 } else {
628 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
629 PIC32_UART_MODE_PDSEL0);
630 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
631 PIC32_UART_MODE_PDSEL1);
632 }
633 } else {
634 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
635 PIC32_UART_MODE_PDSEL1 |
636 PIC32_UART_MODE_PDSEL0);
637 }
638 /* if hw flow ctrl, then the pins must be specified in device tree */
639 if ((new->c_cflag & CRTSCTS) && sport->cts_gpiod) {
640 /* enable hardware flow control */
641 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
642 PIC32_UART_MODE_UEN1);
643 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
644 PIC32_UART_MODE_UEN0);
645 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
646 PIC32_UART_MODE_RTSMD);
647 } else {
648 /* disable hardware flow control */
649 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
650 PIC32_UART_MODE_UEN1);
651 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
652 PIC32_UART_MODE_UEN0);
653 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
654 PIC32_UART_MODE_RTSMD);
655 }
656
657 /* Always 8-bit */
658 new->c_cflag |= CS8;
659
660 /* Mark/Space parity is not supported */
661 new->c_cflag &= ~CMSPAR;
662
663 /* update baud */
664 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
665 quot = uart_get_divisor(port, baud) - 1;
666 pic32_uart_writel(sport, PIC32_UART_BRG, quot);
667 uart_update_timeout(port, new->c_cflag, baud);
668
669 if (tty_termios_baud_rate(new))
670 tty_termios_encode_baud_rate(new, baud, baud);
671
672 /* enable uart */
673 pic32_uart_en_and_unmask(port);
674
675 uart_port_unlock_irqrestore(port, flags);
676}
677
678/* serial core request to claim uart iomem */
679static int pic32_uart_request_port(struct uart_port *port)
680{
681 struct platform_device *pdev = to_platform_device(port->dev);
682 struct resource *res_mem;
683
684 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
685 if (unlikely(!res_mem))
686 return -EINVAL;
687
688 if (!request_mem_region(port->mapbase, resource_size(res_mem),
689 "pic32_uart_mem"))
690 return -EBUSY;
691
692 port->membase = devm_ioremap(port->dev, port->mapbase,
693 resource_size(res_mem));
694 if (!port->membase) {
695 dev_err(port->dev, "Unable to map registers\n");
696 release_mem_region(port->mapbase, resource_size(res_mem));
697 return -ENOMEM;
698 }
699
700 return 0;
701}
702
703/* serial core request to release uart iomem */
704static void pic32_uart_release_port(struct uart_port *port)
705{
706 struct platform_device *pdev = to_platform_device(port->dev);
707 struct resource *res_mem;
708 unsigned int res_size;
709
710 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
711 if (unlikely(!res_mem))
712 return;
713 res_size = resource_size(res_mem);
714
715 release_mem_region(port->mapbase, res_size);
716}
717
718/* serial core request to do any port required auto-configuration */
719static void pic32_uart_config_port(struct uart_port *port, int flags)
720{
721 if (flags & UART_CONFIG_TYPE) {
722 if (pic32_uart_request_port(port))
723 return;
724 port->type = PORT_PIC32;
725 }
726}
727
728/* serial core request to check that port information in serinfo are suitable */
729static int pic32_uart_verify_port(struct uart_port *port,
730 struct serial_struct *serinfo)
731{
732 if (port->type != PORT_PIC32)
733 return -EINVAL;
734 if (port->irq != serinfo->irq)
735 return -EINVAL;
736 if (port->iotype != serinfo->io_type)
737 return -EINVAL;
738 if (port->mapbase != (unsigned long)serinfo->iomem_base)
739 return -EINVAL;
740
741 return 0;
742}
743
744/* serial core callbacks */
745static const struct uart_ops pic32_uart_ops = {
746 .tx_empty = pic32_uart_tx_empty,
747 .get_mctrl = pic32_uart_get_mctrl,
748 .set_mctrl = pic32_uart_set_mctrl,
749 .start_tx = pic32_uart_start_tx,
750 .stop_tx = pic32_uart_stop_tx,
751 .stop_rx = pic32_uart_stop_rx,
752 .break_ctl = pic32_uart_break_ctl,
753 .startup = pic32_uart_startup,
754 .shutdown = pic32_uart_shutdown,
755 .set_termios = pic32_uart_set_termios,
756 .type = pic32_uart_type,
757 .release_port = pic32_uart_release_port,
758 .request_port = pic32_uart_request_port,
759 .config_port = pic32_uart_config_port,
760 .verify_port = pic32_uart_verify_port,
761};
762
763#ifdef CONFIG_SERIAL_PIC32_CONSOLE
764/* output given char */
765static void pic32_console_putchar(struct uart_port *port, unsigned char ch)
766{
767 struct pic32_sport *sport = to_pic32_sport(port);
768
769 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
770 return;
771
772 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
773 return;
774
775 /* wait for tx empty */
776 pic32_wait_deplete_txbuf(sport);
777
778 pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff);
779}
780
781/* console core request to output given string */
782static void pic32_console_write(struct console *co, const char *s,
783 unsigned int count)
784{
785 struct pic32_sport *sport = pic32_sports[co->index];
786
787 /* call uart helper to deal with \r\n */
788 uart_console_write(&sport->port, s, count, pic32_console_putchar);
789}
790
791/* console core request to setup given console, find matching uart
792 * port and setup it.
793 */
794static int pic32_console_setup(struct console *co, char *options)
795{
796 struct pic32_sport *sport;
797 int baud = 115200;
798 int bits = 8;
799 int parity = 'n';
800 int flow = 'n';
801 int ret = 0;
802
803 if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS))
804 return -ENODEV;
805
806 sport = pic32_sports[co->index];
807 if (!sport)
808 return -ENODEV;
809
810 ret = clk_prepare_enable(sport->clk);
811 if (ret)
812 return ret;
813
814 if (options)
815 uart_parse_options(options, &baud, &parity, &bits, &flow);
816
817 return uart_set_options(&sport->port, co, baud, parity, bits, flow);
818}
819
820static struct uart_driver pic32_uart_driver;
821static struct console pic32_console = {
822 .name = PIC32_SDEV_NAME,
823 .write = pic32_console_write,
824 .device = uart_console_device,
825 .setup = pic32_console_setup,
826 .flags = CON_PRINTBUFFER,
827 .index = -1,
828 .data = &pic32_uart_driver,
829};
830#define PIC32_SCONSOLE (&pic32_console)
831
832static int __init pic32_console_init(void)
833{
834 register_console(&pic32_console);
835 return 0;
836}
837console_initcall(pic32_console_init);
838
839/*
840 * Late console initialization.
841 */
842static int __init pic32_late_console_init(void)
843{
844 if (!console_is_registered(&pic32_console))
845 register_console(&pic32_console);
846
847 return 0;
848}
849
850core_initcall(pic32_late_console_init);
851
852#else
853#define PIC32_SCONSOLE NULL
854#endif
855
856static struct uart_driver pic32_uart_driver = {
857 .owner = THIS_MODULE,
858 .driver_name = PIC32_DEV_NAME,
859 .dev_name = PIC32_SDEV_NAME,
860 .nr = PIC32_MAX_UARTS,
861 .cons = PIC32_SCONSOLE,
862};
863
864static int pic32_uart_probe(struct platform_device *pdev)
865{
866 struct device *dev = &pdev->dev;
867 struct device_node *np = dev->of_node;
868 struct pic32_sport *sport;
869 int uart_idx = 0;
870 struct resource *res_mem;
871 struct uart_port *port;
872 int ret;
873
874 uart_idx = of_alias_get_id(np, "serial");
875 if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS)
876 return -EINVAL;
877
878 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
879 if (!res_mem)
880 return -EINVAL;
881
882 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
883 if (!sport)
884 return -ENOMEM;
885
886 sport->idx = uart_idx;
887 sport->irq_fault = irq_of_parse_and_map(np, 0);
888 sport->irq_rx = irq_of_parse_and_map(np, 1);
889 sport->irq_tx = irq_of_parse_and_map(np, 2);
890 sport->clk = devm_clk_get(&pdev->dev, NULL);
891 if (IS_ERR(sport->clk))
892 return PTR_ERR(sport->clk);
893 sport->dev = &pdev->dev;
894
895 /* Hardware flow control: gpios
896 * !Note: Basically, CTS is needed for reading the status.
897 */
898 sport->cts_gpiod = devm_gpiod_get_optional(dev, "cts", GPIOD_IN);
899 if (IS_ERR(sport->cts_gpiod))
900 return dev_err_probe(dev, PTR_ERR(sport->cts_gpiod), "error requesting CTS GPIO\n");
901 gpiod_set_consumer_name(sport->cts_gpiod, "CTS");
902
903 pic32_sports[uart_idx] = sport;
904 port = &sport->port;
905 port->iotype = UPIO_MEM;
906 port->mapbase = res_mem->start;
907 port->ops = &pic32_uart_ops;
908 port->flags = UPF_BOOT_AUTOCONF;
909 port->dev = &pdev->dev;
910 port->fifosize = PIC32_UART_TX_FIFO_DEPTH;
911 port->uartclk = clk_get_rate(sport->clk);
912 port->line = uart_idx;
913
914 ret = uart_add_one_port(&pic32_uart_driver, port);
915 if (ret) {
916 port->membase = NULL;
917 dev_err(port->dev, "%s: uart add port error!\n", __func__);
918 goto err;
919 }
920
921#ifdef CONFIG_SERIAL_PIC32_CONSOLE
922 if (uart_console_registered(port)) {
923 /* The peripheral clock has been enabled by console_setup,
924 * so disable it till the port is used.
925 */
926 clk_disable_unprepare(sport->clk);
927 }
928#endif
929
930 platform_set_drvdata(pdev, port);
931
932 dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n",
933 __func__, uart_idx);
934
935 return 0;
936err:
937 /* automatic unroll of sport and gpios */
938 return ret;
939}
940
941static void pic32_uart_remove(struct platform_device *pdev)
942{
943 struct uart_port *port = platform_get_drvdata(pdev);
944 struct pic32_sport *sport = to_pic32_sport(port);
945
946 uart_remove_one_port(&pic32_uart_driver, port);
947 clk_disable_unprepare(sport->clk);
948 platform_set_drvdata(pdev, NULL);
949 pic32_sports[sport->idx] = NULL;
950}
951
952static const struct of_device_id pic32_serial_dt_ids[] = {
953 { .compatible = "microchip,pic32mzda-uart" },
954 { /* sentinel */ }
955};
956MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
957
958static struct platform_driver pic32_uart_platform_driver = {
959 .probe = pic32_uart_probe,
960 .remove_new = pic32_uart_remove,
961 .driver = {
962 .name = PIC32_DEV_NAME,
963 .of_match_table = of_match_ptr(pic32_serial_dt_ids),
964 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32),
965 },
966};
967
968static int __init pic32_uart_init(void)
969{
970 int ret;
971
972 ret = uart_register_driver(&pic32_uart_driver);
973 if (ret) {
974 pr_err("failed to register %s:%d\n",
975 pic32_uart_driver.driver_name, ret);
976 return ret;
977 }
978
979 ret = platform_driver_register(&pic32_uart_platform_driver);
980 if (ret) {
981 pr_err("fail to register pic32 uart\n");
982 uart_unregister_driver(&pic32_uart_driver);
983 }
984
985 return ret;
986}
987arch_initcall(pic32_uart_init);
988
989static void __exit pic32_uart_exit(void)
990{
991#ifdef CONFIG_SERIAL_PIC32_CONSOLE
992 unregister_console(&pic32_console);
993#endif
994 platform_driver_unregister(&pic32_uart_platform_driver);
995 uart_unregister_driver(&pic32_uart_driver);
996}
997module_exit(pic32_uart_exit);
998
999MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>");
1000MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver");
1001MODULE_LICENSE("GPL v2");
1/*
2 * PIC32 Integrated Serial Driver.
3 *
4 * Copyright (C) 2015 Microchip Technology, Inc.
5 *
6 * Authors:
7 * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
8 *
9 * Licensed under GPLv2 or later.
10 */
11
12#include <linux/kernel.h>
13#include <linux/platform_device.h>
14#include <linux/of.h>
15#include <linux/of_device.h>
16#include <linux/of_irq.h>
17#include <linux/of_gpio.h>
18#include <linux/init.h>
19#include <linux/module.h>
20#include <linux/slab.h>
21#include <linux/console.h>
22#include <linux/clk.h>
23#include <linux/tty.h>
24#include <linux/tty_flip.h>
25#include <linux/serial_core.h>
26#include <linux/delay.h>
27
28#include <asm/mach-pic32/pic32.h>
29#include "pic32_uart.h"
30
31/* UART name and device definitions */
32#define PIC32_DEV_NAME "pic32-uart"
33#define PIC32_MAX_UARTS 6
34#define PIC32_SDEV_NAME "ttyPIC"
35
36/* pic32_sport pointer for console use */
37static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS];
38
39static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport)
40{
41 /* wait for tx empty, otherwise chars will be lost or corrupted */
42 while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT))
43 udelay(1);
44}
45
46static inline int pic32_enable_clock(struct pic32_sport *sport)
47{
48 int ret = clk_prepare_enable(sport->clk);
49
50 if (ret)
51 return ret;
52
53 sport->ref_clk++;
54 return 0;
55}
56
57static inline void pic32_disable_clock(struct pic32_sport *sport)
58{
59 sport->ref_clk--;
60 clk_disable_unprepare(sport->clk);
61}
62
63/* serial core request to check if uart tx buffer is empty */
64static unsigned int pic32_uart_tx_empty(struct uart_port *port)
65{
66 struct pic32_sport *sport = to_pic32_sport(port);
67 u32 val = pic32_uart_readl(sport, PIC32_UART_STA);
68
69 return (val & PIC32_UART_STA_TRMT) ? 1 : 0;
70}
71
72/* serial core request to set UART outputs */
73static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
74{
75 struct pic32_sport *sport = to_pic32_sport(port);
76
77 /* set loopback mode */
78 if (mctrl & TIOCM_LOOP)
79 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
80 PIC32_UART_MODE_LPBK);
81 else
82 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
83 PIC32_UART_MODE_LPBK);
84}
85
86/* get the state of CTS input pin for this port */
87static unsigned int get_cts_state(struct pic32_sport *sport)
88{
89 /* read and invert UxCTS */
90 if (gpio_is_valid(sport->cts_gpio))
91 return !gpio_get_value(sport->cts_gpio);
92
93 return 1;
94}
95
96/* serial core request to return the state of misc UART input pins */
97static unsigned int pic32_uart_get_mctrl(struct uart_port *port)
98{
99 struct pic32_sport *sport = to_pic32_sport(port);
100 unsigned int mctrl = 0;
101
102 if (!sport->hw_flow_ctrl)
103 mctrl |= TIOCM_CTS;
104 else if (get_cts_state(sport))
105 mctrl |= TIOCM_CTS;
106
107 /* DSR and CD are not supported in PIC32, so return 1
108 * RI is not supported in PIC32, so return 0
109 */
110 mctrl |= TIOCM_CD;
111 mctrl |= TIOCM_DSR;
112
113 return mctrl;
114}
115
116/* stop tx and start tx are not called in pairs, therefore a flag indicates
117 * the status of irq to control the irq-depth.
118 */
119static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en)
120{
121 if (en && !tx_irq_enabled(sport)) {
122 enable_irq(sport->irq_tx);
123 tx_irq_enabled(sport) = 1;
124 } else if (!en && tx_irq_enabled(sport)) {
125 /* use disable_irq_nosync() and not disable_irq() to avoid self
126 * imposed deadlock by not waiting for irq handler to end,
127 * since this callback is called from interrupt context.
128 */
129 disable_irq_nosync(sport->irq_tx);
130 tx_irq_enabled(sport) = 0;
131 }
132}
133
134/* serial core request to disable tx ASAP (used for flow control) */
135static void pic32_uart_stop_tx(struct uart_port *port)
136{
137 struct pic32_sport *sport = to_pic32_sport(port);
138
139 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
140 return;
141
142 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
143 return;
144
145 /* wait for tx empty */
146 pic32_wait_deplete_txbuf(sport);
147
148 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
149 PIC32_UART_STA_UTXEN);
150 pic32_uart_irqtxen(sport, 0);
151}
152
153/* serial core request to (re)enable tx */
154static void pic32_uart_start_tx(struct uart_port *port)
155{
156 struct pic32_sport *sport = to_pic32_sport(port);
157
158 pic32_uart_irqtxen(sport, 1);
159 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
160 PIC32_UART_STA_UTXEN);
161}
162
163/* serial core request to stop rx, called before port shutdown */
164static void pic32_uart_stop_rx(struct uart_port *port)
165{
166 struct pic32_sport *sport = to_pic32_sport(port);
167
168 /* disable rx interrupts */
169 disable_irq(sport->irq_rx);
170
171 /* receiver Enable bit OFF */
172 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
173 PIC32_UART_STA_URXEN);
174}
175
176/* serial core request to start/stop emitting break char */
177static void pic32_uart_break_ctl(struct uart_port *port, int ctl)
178{
179 struct pic32_sport *sport = to_pic32_sport(port);
180 unsigned long flags;
181
182 spin_lock_irqsave(&port->lock, flags);
183
184 if (ctl)
185 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
186 PIC32_UART_STA_UTXBRK);
187 else
188 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
189 PIC32_UART_STA_UTXBRK);
190
191 spin_unlock_irqrestore(&port->lock, flags);
192}
193
194/* get port type in string format */
195static const char *pic32_uart_type(struct uart_port *port)
196{
197 return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL;
198}
199
200/* read all chars in rx fifo and send them to core */
201static void pic32_uart_do_rx(struct uart_port *port)
202{
203 struct pic32_sport *sport = to_pic32_sport(port);
204 struct tty_port *tty;
205 unsigned int max_count;
206
207 /* limit number of char read in interrupt, should not be
208 * higher than fifo size anyway since we're much faster than
209 * serial port
210 */
211 max_count = PIC32_UART_RX_FIFO_DEPTH;
212
213 spin_lock(&port->lock);
214
215 tty = &port->state->port;
216
217 do {
218 u32 sta_reg, c;
219 char flag;
220
221 /* get overrun/fifo empty information from status register */
222 sta_reg = pic32_uart_readl(sport, PIC32_UART_STA);
223 if (unlikely(sta_reg & PIC32_UART_STA_OERR)) {
224
225 /* fifo reset is required to clear interrupt */
226 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
227 PIC32_UART_STA_OERR);
228
229 port->icount.overrun++;
230 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
231 }
232
233 /* Can at least one more character can be read? */
234 if (!(sta_reg & PIC32_UART_STA_URXDA))
235 break;
236
237 /* read the character and increment the rx counter */
238 c = pic32_uart_readl(sport, PIC32_UART_RX);
239
240 port->icount.rx++;
241 flag = TTY_NORMAL;
242 c &= 0xff;
243
244 if (unlikely((sta_reg & PIC32_UART_STA_PERR) ||
245 (sta_reg & PIC32_UART_STA_FERR))) {
246
247 /* do stats first */
248 if (sta_reg & PIC32_UART_STA_PERR)
249 port->icount.parity++;
250 if (sta_reg & PIC32_UART_STA_FERR)
251 port->icount.frame++;
252
253 /* update flag wrt read_status_mask */
254 sta_reg &= port->read_status_mask;
255
256 if (sta_reg & PIC32_UART_STA_FERR)
257 flag = TTY_FRAME;
258 if (sta_reg & PIC32_UART_STA_PERR)
259 flag = TTY_PARITY;
260 }
261
262 if (uart_handle_sysrq_char(port, c))
263 continue;
264
265 if ((sta_reg & port->ignore_status_mask) == 0)
266 tty_insert_flip_char(tty, c, flag);
267
268 } while (--max_count);
269
270 spin_unlock(&port->lock);
271
272 tty_flip_buffer_push(tty);
273}
274
275/* fill tx fifo with chars to send, stop when fifo is about to be full
276 * or when all chars have been sent.
277 */
278static void pic32_uart_do_tx(struct uart_port *port)
279{
280 struct pic32_sport *sport = to_pic32_sport(port);
281 struct circ_buf *xmit = &port->state->xmit;
282 unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH;
283
284 if (port->x_char) {
285 pic32_uart_writel(sport, PIC32_UART_TX, port->x_char);
286 port->icount.tx++;
287 port->x_char = 0;
288 return;
289 }
290
291 if (uart_tx_stopped(port)) {
292 pic32_uart_stop_tx(port);
293 return;
294 }
295
296 if (uart_circ_empty(xmit))
297 goto txq_empty;
298
299 /* keep stuffing chars into uart tx buffer
300 * 1) until uart fifo is full
301 * or
302 * 2) until the circ buffer is empty
303 * (all chars have been sent)
304 * or
305 * 3) until the max count is reached
306 * (prevents lingering here for too long in certain cases)
307 */
308 while (!(PIC32_UART_STA_UTXBF &
309 pic32_uart_readl(sport, PIC32_UART_STA))) {
310 unsigned int c = xmit->buf[xmit->tail];
311
312 pic32_uart_writel(sport, PIC32_UART_TX, c);
313
314 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
315 port->icount.tx++;
316 if (uart_circ_empty(xmit))
317 break;
318 if (--max_count == 0)
319 break;
320 }
321
322 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
323 uart_write_wakeup(port);
324
325 if (uart_circ_empty(xmit))
326 goto txq_empty;
327
328 return;
329
330txq_empty:
331 pic32_uart_irqtxen(sport, 0);
332}
333
334/* RX interrupt handler */
335static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id)
336{
337 struct uart_port *port = dev_id;
338
339 pic32_uart_do_rx(port);
340
341 return IRQ_HANDLED;
342}
343
344/* TX interrupt handler */
345static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id)
346{
347 struct uart_port *port = dev_id;
348 unsigned long flags;
349
350 spin_lock_irqsave(&port->lock, flags);
351 pic32_uart_do_tx(port);
352 spin_unlock_irqrestore(&port->lock, flags);
353
354 return IRQ_HANDLED;
355}
356
357/* FAULT interrupt handler */
358static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id)
359{
360 /* do nothing: pic32_uart_do_rx() handles faults. */
361 return IRQ_HANDLED;
362}
363
364/* enable rx & tx operation on uart */
365static void pic32_uart_en_and_unmask(struct uart_port *port)
366{
367 struct pic32_sport *sport = to_pic32_sport(port);
368
369 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
370 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
371 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
372 PIC32_UART_MODE_ON);
373}
374
375/* disable rx & tx operation on uart */
376static void pic32_uart_dsbl_and_mask(struct uart_port *port)
377{
378 struct pic32_sport *sport = to_pic32_sport(port);
379
380 /* wait for tx empty, otherwise chars will be lost or corrupted */
381 pic32_wait_deplete_txbuf(sport);
382
383 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
384 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
385 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
386 PIC32_UART_MODE_ON);
387}
388
389/* serial core request to initialize uart and start rx operation */
390static int pic32_uart_startup(struct uart_port *port)
391{
392 struct pic32_sport *sport = to_pic32_sport(port);
393 u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1;
394 unsigned long flags;
395 int ret;
396
397 local_irq_save(flags);
398
399 ret = pic32_enable_clock(sport);
400 if (ret) {
401 local_irq_restore(flags);
402 goto out_done;
403 }
404
405 /* clear status and mode registers */
406 pic32_uart_writel(sport, PIC32_UART_MODE, 0);
407 pic32_uart_writel(sport, PIC32_UART_STA, 0);
408
409 /* disable uart and mask all interrupts */
410 pic32_uart_dsbl_and_mask(port);
411
412 /* set default baud */
413 pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud);
414
415 local_irq_restore(flags);
416
417 /* Each UART of a PIC32 has three interrupts therefore,
418 * we setup driver to register the 3 irqs for the device.
419 *
420 * For each irq request_irq() is called with interrupt disabled.
421 * And the irq is enabled as soon as we are ready to handle them.
422 */
423 tx_irq_enabled(sport) = 0;
424
425 sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault",
426 pic32_uart_type(port),
427 sport->idx);
428 if (!sport->irq_fault_name) {
429 dev_err(port->dev, "%s: kasprintf err!", __func__);
430 ret = -ENOMEM;
431 goto out_done;
432 }
433 irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
434 ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
435 sport->irqflags_fault, sport->irq_fault_name, port);
436 if (ret) {
437 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
438 __func__, sport->irq_fault, ret,
439 pic32_uart_type(port));
440 goto out_f;
441 }
442
443 sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx",
444 pic32_uart_type(port),
445 sport->idx);
446 if (!sport->irq_rx_name) {
447 dev_err(port->dev, "%s: kasprintf err!", __func__);
448 ret = -ENOMEM;
449 goto out_f;
450 }
451 irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN);
452 ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt,
453 sport->irqflags_rx, sport->irq_rx_name, port);
454 if (ret) {
455 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
456 __func__, sport->irq_rx, ret,
457 pic32_uart_type(port));
458 goto out_r;
459 }
460
461 sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx",
462 pic32_uart_type(port),
463 sport->idx);
464 if (!sport->irq_tx_name) {
465 dev_err(port->dev, "%s: kasprintf err!", __func__);
466 ret = -ENOMEM;
467 goto out_r;
468 }
469 irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN);
470 ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt,
471 sport->irqflags_tx, sport->irq_tx_name, port);
472 if (ret) {
473 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
474 __func__, sport->irq_tx, ret,
475 pic32_uart_type(port));
476 goto out_t;
477 }
478
479 local_irq_save(flags);
480
481 /* set rx interrupt on first receive */
482 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
483 PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0);
484
485 /* set interrupt on empty */
486 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
487 PIC32_UART_STA_UTXISEL1);
488
489 /* enable all interrupts and eanable uart */
490 pic32_uart_en_and_unmask(port);
491
492 enable_irq(sport->irq_rx);
493
494 return 0;
495
496out_t:
497 kfree(sport->irq_tx_name);
498 free_irq(sport->irq_tx, sport);
499out_r:
500 kfree(sport->irq_rx_name);
501 free_irq(sport->irq_rx, sport);
502out_f:
503 kfree(sport->irq_fault_name);
504 free_irq(sport->irq_fault, sport);
505out_done:
506 return ret;
507}
508
509/* serial core request to flush & disable uart */
510static void pic32_uart_shutdown(struct uart_port *port)
511{
512 struct pic32_sport *sport = to_pic32_sport(port);
513 unsigned long flags;
514
515 /* disable uart */
516 spin_lock_irqsave(&port->lock, flags);
517 pic32_uart_dsbl_and_mask(port);
518 spin_unlock_irqrestore(&port->lock, flags);
519 pic32_disable_clock(sport);
520
521 /* free all 3 interrupts for this UART */
522 free_irq(sport->irq_fault, port);
523 free_irq(sport->irq_tx, port);
524 free_irq(sport->irq_rx, port);
525}
526
527/* serial core request to change current uart setting */
528static void pic32_uart_set_termios(struct uart_port *port,
529 struct ktermios *new,
530 struct ktermios *old)
531{
532 struct pic32_sport *sport = to_pic32_sport(port);
533 unsigned int baud;
534 unsigned int quot;
535 unsigned long flags;
536
537 spin_lock_irqsave(&port->lock, flags);
538
539 /* disable uart and mask all interrupts while changing speed */
540 pic32_uart_dsbl_and_mask(port);
541
542 /* stop bit options */
543 if (new->c_cflag & CSTOPB)
544 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
545 PIC32_UART_MODE_STSEL);
546 else
547 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
548 PIC32_UART_MODE_STSEL);
549
550 /* parity options */
551 if (new->c_cflag & PARENB) {
552 if (new->c_cflag & PARODD) {
553 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
554 PIC32_UART_MODE_PDSEL1);
555 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
556 PIC32_UART_MODE_PDSEL0);
557 } else {
558 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
559 PIC32_UART_MODE_PDSEL0);
560 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
561 PIC32_UART_MODE_PDSEL1);
562 }
563 } else {
564 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
565 PIC32_UART_MODE_PDSEL1 |
566 PIC32_UART_MODE_PDSEL0);
567 }
568 /* if hw flow ctrl, then the pins must be specified in device tree */
569 if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) {
570 /* enable hardware flow control */
571 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
572 PIC32_UART_MODE_UEN1);
573 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
574 PIC32_UART_MODE_UEN0);
575 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
576 PIC32_UART_MODE_RTSMD);
577 } else {
578 /* disable hardware flow control */
579 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
580 PIC32_UART_MODE_UEN1);
581 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
582 PIC32_UART_MODE_UEN0);
583 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
584 PIC32_UART_MODE_RTSMD);
585 }
586
587 /* Always 8-bit */
588 new->c_cflag |= CS8;
589
590 /* Mark/Space parity is not supported */
591 new->c_cflag &= ~CMSPAR;
592
593 /* update baud */
594 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
595 quot = uart_get_divisor(port, baud) - 1;
596 pic32_uart_writel(sport, PIC32_UART_BRG, quot);
597 uart_update_timeout(port, new->c_cflag, baud);
598
599 if (tty_termios_baud_rate(new))
600 tty_termios_encode_baud_rate(new, baud, baud);
601
602 /* enable uart */
603 pic32_uart_en_and_unmask(port);
604
605 spin_unlock_irqrestore(&port->lock, flags);
606}
607
608/* serial core request to claim uart iomem */
609static int pic32_uart_request_port(struct uart_port *port)
610{
611 struct platform_device *pdev = to_platform_device(port->dev);
612 struct resource *res_mem;
613
614 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
615 if (unlikely(!res_mem))
616 return -EINVAL;
617
618 if (!request_mem_region(port->mapbase, resource_size(res_mem),
619 "pic32_uart_mem"))
620 return -EBUSY;
621
622 port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
623 resource_size(res_mem));
624 if (!port->membase) {
625 dev_err(port->dev, "Unable to map registers\n");
626 release_mem_region(port->mapbase, resource_size(res_mem));
627 return -ENOMEM;
628 }
629
630 return 0;
631}
632
633/* serial core request to release uart iomem */
634static void pic32_uart_release_port(struct uart_port *port)
635{
636 struct platform_device *pdev = to_platform_device(port->dev);
637 struct resource *res_mem;
638 unsigned int res_size;
639
640 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
641 if (unlikely(!res_mem))
642 return;
643 res_size = resource_size(res_mem);
644
645 release_mem_region(port->mapbase, res_size);
646}
647
648/* serial core request to do any port required auto-configuration */
649static void pic32_uart_config_port(struct uart_port *port, int flags)
650{
651 if (flags & UART_CONFIG_TYPE) {
652 if (pic32_uart_request_port(port))
653 return;
654 port->type = PORT_PIC32;
655 }
656}
657
658/* serial core request to check that port information in serinfo are suitable */
659static int pic32_uart_verify_port(struct uart_port *port,
660 struct serial_struct *serinfo)
661{
662 if (port->type != PORT_PIC32)
663 return -EINVAL;
664 if (port->irq != serinfo->irq)
665 return -EINVAL;
666 if (port->iotype != serinfo->io_type)
667 return -EINVAL;
668 if (port->mapbase != (unsigned long)serinfo->iomem_base)
669 return -EINVAL;
670
671 return 0;
672}
673
674/* serial core callbacks */
675static const struct uart_ops pic32_uart_ops = {
676 .tx_empty = pic32_uart_tx_empty,
677 .get_mctrl = pic32_uart_get_mctrl,
678 .set_mctrl = pic32_uart_set_mctrl,
679 .start_tx = pic32_uart_start_tx,
680 .stop_tx = pic32_uart_stop_tx,
681 .stop_rx = pic32_uart_stop_rx,
682 .break_ctl = pic32_uart_break_ctl,
683 .startup = pic32_uart_startup,
684 .shutdown = pic32_uart_shutdown,
685 .set_termios = pic32_uart_set_termios,
686 .type = pic32_uart_type,
687 .release_port = pic32_uart_release_port,
688 .request_port = pic32_uart_request_port,
689 .config_port = pic32_uart_config_port,
690 .verify_port = pic32_uart_verify_port,
691};
692
693#ifdef CONFIG_SERIAL_PIC32_CONSOLE
694/* output given char */
695static void pic32_console_putchar(struct uart_port *port, int ch)
696{
697 struct pic32_sport *sport = to_pic32_sport(port);
698
699 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
700 return;
701
702 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
703 return;
704
705 /* wait for tx empty */
706 pic32_wait_deplete_txbuf(sport);
707
708 pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff);
709}
710
711/* console core request to output given string */
712static void pic32_console_write(struct console *co, const char *s,
713 unsigned int count)
714{
715 struct pic32_sport *sport = pic32_sports[co->index];
716 struct uart_port *port = pic32_get_port(sport);
717
718 /* call uart helper to deal with \r\n */
719 uart_console_write(port, s, count, pic32_console_putchar);
720}
721
722/* console core request to setup given console, find matching uart
723 * port and setup it.
724 */
725static int pic32_console_setup(struct console *co, char *options)
726{
727 struct pic32_sport *sport;
728 struct uart_port *port = NULL;
729 int baud = 115200;
730 int bits = 8;
731 int parity = 'n';
732 int flow = 'n';
733 int ret = 0;
734
735 if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS))
736 return -ENODEV;
737
738 sport = pic32_sports[co->index];
739 if (!sport)
740 return -ENODEV;
741 port = pic32_get_port(sport);
742
743 ret = pic32_enable_clock(sport);
744 if (ret)
745 return ret;
746
747 if (options)
748 uart_parse_options(options, &baud, &parity, &bits, &flow);
749
750 return uart_set_options(port, co, baud, parity, bits, flow);
751}
752
753static struct uart_driver pic32_uart_driver;
754static struct console pic32_console = {
755 .name = PIC32_SDEV_NAME,
756 .write = pic32_console_write,
757 .device = uart_console_device,
758 .setup = pic32_console_setup,
759 .flags = CON_PRINTBUFFER,
760 .index = -1,
761 .data = &pic32_uart_driver,
762};
763#define PIC32_SCONSOLE (&pic32_console)
764
765static int __init pic32_console_init(void)
766{
767 register_console(&pic32_console);
768 return 0;
769}
770console_initcall(pic32_console_init);
771
772static inline bool is_pic32_console_port(struct uart_port *port)
773{
774 return port->cons && port->cons->index == port->line;
775}
776
777/*
778 * Late console initialization.
779 */
780static int __init pic32_late_console_init(void)
781{
782 if (!(pic32_console.flags & CON_ENABLED))
783 register_console(&pic32_console);
784
785 return 0;
786}
787
788core_initcall(pic32_late_console_init);
789
790#else
791#define PIC32_SCONSOLE NULL
792#endif
793
794static struct uart_driver pic32_uart_driver = {
795 .owner = THIS_MODULE,
796 .driver_name = PIC32_DEV_NAME,
797 .dev_name = PIC32_SDEV_NAME,
798 .nr = PIC32_MAX_UARTS,
799 .cons = PIC32_SCONSOLE,
800};
801
802static int pic32_uart_probe(struct platform_device *pdev)
803{
804 struct device_node *np = pdev->dev.of_node;
805 struct pic32_sport *sport;
806 int uart_idx = 0;
807 struct resource *res_mem;
808 struct uart_port *port;
809 int ret;
810
811 uart_idx = of_alias_get_id(np, "serial");
812 if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS)
813 return -EINVAL;
814
815 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
816 if (!res_mem)
817 return -EINVAL;
818
819 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
820 if (!sport)
821 return -ENOMEM;
822
823 sport->idx = uart_idx;
824 sport->irq_fault = irq_of_parse_and_map(np, 0);
825 sport->irqflags_fault = IRQF_NO_THREAD;
826 sport->irq_rx = irq_of_parse_and_map(np, 1);
827 sport->irqflags_rx = IRQF_NO_THREAD;
828 sport->irq_tx = irq_of_parse_and_map(np, 2);
829 sport->irqflags_tx = IRQF_NO_THREAD;
830 sport->clk = devm_clk_get(&pdev->dev, NULL);
831 sport->cts_gpio = -EINVAL;
832 sport->dev = &pdev->dev;
833
834 /* Hardware flow control: gpios
835 * !Note: Basically, CTS is needed for reading the status.
836 */
837 sport->hw_flow_ctrl = false;
838 sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0);
839 if (gpio_is_valid(sport->cts_gpio)) {
840 sport->hw_flow_ctrl = true;
841
842 ret = devm_gpio_request(sport->dev,
843 sport->cts_gpio, "CTS");
844 if (ret) {
845 dev_err(&pdev->dev,
846 "error requesting CTS GPIO\n");
847 goto err;
848 }
849
850 ret = gpio_direction_input(sport->cts_gpio);
851 if (ret) {
852 dev_err(&pdev->dev, "error setting CTS GPIO\n");
853 goto err;
854 }
855 }
856
857 pic32_sports[uart_idx] = sport;
858 port = &sport->port;
859 memset(port, 0, sizeof(*port));
860 port->iotype = UPIO_MEM;
861 port->mapbase = res_mem->start;
862 port->ops = &pic32_uart_ops;
863 port->flags = UPF_BOOT_AUTOCONF;
864 port->dev = &pdev->dev;
865 port->fifosize = PIC32_UART_TX_FIFO_DEPTH;
866 port->uartclk = clk_get_rate(sport->clk);
867 port->line = uart_idx;
868
869 ret = uart_add_one_port(&pic32_uart_driver, port);
870 if (ret) {
871 port->membase = NULL;
872 dev_err(port->dev, "%s: uart add port error!\n", __func__);
873 goto err;
874 }
875
876#ifdef CONFIG_SERIAL_PIC32_CONSOLE
877 if (is_pic32_console_port(port) &&
878 (pic32_console.flags & CON_ENABLED)) {
879 /* The peripheral clock has been enabled by console_setup,
880 * so disable it till the port is used.
881 */
882 pic32_disable_clock(sport);
883 }
884#endif
885
886 platform_set_drvdata(pdev, port);
887
888 dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n",
889 __func__, uart_idx);
890
891 return 0;
892err:
893 /* automatic unroll of sport and gpios */
894 return ret;
895}
896
897static int pic32_uart_remove(struct platform_device *pdev)
898{
899 struct uart_port *port = platform_get_drvdata(pdev);
900 struct pic32_sport *sport = to_pic32_sport(port);
901
902 uart_remove_one_port(&pic32_uart_driver, port);
903 pic32_disable_clock(sport);
904 platform_set_drvdata(pdev, NULL);
905 pic32_sports[sport->idx] = NULL;
906
907 /* automatic unroll of sport and gpios */
908 return 0;
909}
910
911static const struct of_device_id pic32_serial_dt_ids[] = {
912 { .compatible = "microchip,pic32mzda-uart" },
913 { /* sentinel */ }
914};
915MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
916
917static struct platform_driver pic32_uart_platform_driver = {
918 .probe = pic32_uart_probe,
919 .remove = pic32_uart_remove,
920 .driver = {
921 .name = PIC32_DEV_NAME,
922 .of_match_table = of_match_ptr(pic32_serial_dt_ids),
923 },
924};
925
926static int __init pic32_uart_init(void)
927{
928 int ret;
929
930 ret = uart_register_driver(&pic32_uart_driver);
931 if (ret) {
932 pr_err("failed to register %s:%d\n",
933 pic32_uart_driver.driver_name, ret);
934 return ret;
935 }
936
937 ret = platform_driver_register(&pic32_uart_platform_driver);
938 if (ret) {
939 pr_err("fail to register pic32 uart\n");
940 uart_unregister_driver(&pic32_uart_driver);
941 }
942
943 return ret;
944}
945arch_initcall(pic32_uart_init);
946
947static void __exit pic32_uart_exit(void)
948{
949#ifdef CONFIG_SERIAL_PIC32_CONSOLE
950 unregister_console(&pic32_console);
951#endif
952 platform_driver_unregister(&pic32_uart_platform_driver);
953 uart_unregister_driver(&pic32_uart_driver);
954}
955module_exit(pic32_uart_exit);
956
957MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>");
958MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver");
959MODULE_LICENSE("GPL v2");