Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * scsi_error.c Copyright (C) 1997 Eric Youngdale
4 *
5 * SCSI error/timeout handling
6 * Initial versions: Eric Youngdale. Based upon conversations with
7 * Leonard Zubkoff and David Miller at Linux Expo,
8 * ideas originating from all over the place.
9 *
10 * Restructured scsi_unjam_host and associated functions.
11 * September 04, 2002 Mike Anderson (andmike@us.ibm.com)
12 *
13 * Forward port of Russell King's (rmk@arm.linux.org.uk) changes and
14 * minor cleanups.
15 * September 30, 2002 Mike Anderson (andmike@us.ibm.com)
16 */
17
18#include <linux/module.h>
19#include <linux/sched.h>
20#include <linux/gfp.h>
21#include <linux/timer.h>
22#include <linux/string.h>
23#include <linux/kernel.h>
24#include <linux/freezer.h>
25#include <linux/kthread.h>
26#include <linux/interrupt.h>
27#include <linux/blkdev.h>
28#include <linux/delay.h>
29#include <linux/jiffies.h>
30
31#include <scsi/scsi.h>
32#include <scsi/scsi_cmnd.h>
33#include <scsi/scsi_dbg.h>
34#include <scsi/scsi_device.h>
35#include <scsi/scsi_driver.h>
36#include <scsi/scsi_eh.h>
37#include <scsi/scsi_common.h>
38#include <scsi/scsi_transport.h>
39#include <scsi/scsi_host.h>
40#include <scsi/scsi_ioctl.h>
41#include <scsi/scsi_dh.h>
42#include <scsi/scsi_devinfo.h>
43#include <scsi/sg.h>
44
45#include "scsi_priv.h"
46#include "scsi_logging.h"
47#include "scsi_transport_api.h"
48
49#include <trace/events/scsi.h>
50
51#include <asm/unaligned.h>
52
53/*
54 * These should *probably* be handled by the host itself.
55 * Since it is allowed to sleep, it probably should.
56 */
57#define BUS_RESET_SETTLE_TIME (10)
58#define HOST_RESET_SETTLE_TIME (10)
59
60static int scsi_eh_try_stu(struct scsi_cmnd *scmd);
61static enum scsi_disposition scsi_try_to_abort_cmd(const struct scsi_host_template *,
62 struct scsi_cmnd *);
63
64void scsi_eh_wakeup(struct Scsi_Host *shost, unsigned int busy)
65{
66 lockdep_assert_held(shost->host_lock);
67
68 if (busy == shost->host_failed) {
69 trace_scsi_eh_wakeup(shost);
70 wake_up_process(shost->ehandler);
71 SCSI_LOG_ERROR_RECOVERY(5, shost_printk(KERN_INFO, shost,
72 "Waking error handler thread\n"));
73 }
74}
75
76/**
77 * scsi_schedule_eh - schedule EH for SCSI host
78 * @shost: SCSI host to invoke error handling on.
79 *
80 * Schedule SCSI EH without scmd.
81 */
82void scsi_schedule_eh(struct Scsi_Host *shost)
83{
84 unsigned long flags;
85
86 spin_lock_irqsave(shost->host_lock, flags);
87
88 if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 ||
89 scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) {
90 shost->host_eh_scheduled++;
91 scsi_eh_wakeup(shost, scsi_host_busy(shost));
92 }
93
94 spin_unlock_irqrestore(shost->host_lock, flags);
95}
96EXPORT_SYMBOL_GPL(scsi_schedule_eh);
97
98static int scsi_host_eh_past_deadline(struct Scsi_Host *shost)
99{
100 if (!shost->last_reset || shost->eh_deadline == -1)
101 return 0;
102
103 /*
104 * 32bit accesses are guaranteed to be atomic
105 * (on all supported architectures), so instead
106 * of using a spinlock we can as well double check
107 * if eh_deadline has been set to 'off' during the
108 * time_before call.
109 */
110 if (time_before(jiffies, shost->last_reset + shost->eh_deadline) &&
111 shost->eh_deadline > -1)
112 return 0;
113
114 return 1;
115}
116
117static bool scsi_cmd_retry_allowed(struct scsi_cmnd *cmd)
118{
119 if (cmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT)
120 return true;
121
122 return ++cmd->retries <= cmd->allowed;
123}
124
125static bool scsi_eh_should_retry_cmd(struct scsi_cmnd *cmd)
126{
127 struct scsi_device *sdev = cmd->device;
128 struct Scsi_Host *host = sdev->host;
129
130 if (host->hostt->eh_should_retry_cmd)
131 return host->hostt->eh_should_retry_cmd(cmd);
132
133 return true;
134}
135
136/**
137 * scmd_eh_abort_handler - Handle command aborts
138 * @work: command to be aborted.
139 *
140 * Note: this function must be called only for a command that has timed out.
141 * Because the block layer marks a request as complete before it calls
142 * scsi_timeout(), a .scsi_done() call from the LLD for a command that has
143 * timed out do not have any effect. Hence it is safe to call
144 * scsi_finish_command() from this function.
145 */
146void
147scmd_eh_abort_handler(struct work_struct *work)
148{
149 struct scsi_cmnd *scmd =
150 container_of(work, struct scsi_cmnd, abort_work.work);
151 struct scsi_device *sdev = scmd->device;
152 struct Scsi_Host *shost = sdev->host;
153 enum scsi_disposition rtn;
154 unsigned long flags;
155
156 if (scsi_host_eh_past_deadline(shost)) {
157 SCSI_LOG_ERROR_RECOVERY(3,
158 scmd_printk(KERN_INFO, scmd,
159 "eh timeout, not aborting\n"));
160 goto out;
161 }
162
163 SCSI_LOG_ERROR_RECOVERY(3,
164 scmd_printk(KERN_INFO, scmd,
165 "aborting command\n"));
166 rtn = scsi_try_to_abort_cmd(shost->hostt, scmd);
167 if (rtn != SUCCESS) {
168 SCSI_LOG_ERROR_RECOVERY(3,
169 scmd_printk(KERN_INFO, scmd,
170 "cmd abort %s\n",
171 (rtn == FAST_IO_FAIL) ?
172 "not send" : "failed"));
173 goto out;
174 }
175 set_host_byte(scmd, DID_TIME_OUT);
176 if (scsi_host_eh_past_deadline(shost)) {
177 SCSI_LOG_ERROR_RECOVERY(3,
178 scmd_printk(KERN_INFO, scmd,
179 "eh timeout, not retrying "
180 "aborted command\n"));
181 goto out;
182 }
183
184 spin_lock_irqsave(shost->host_lock, flags);
185 list_del_init(&scmd->eh_entry);
186
187 /*
188 * If the abort succeeds, and there is no further
189 * EH action, clear the ->last_reset time.
190 */
191 if (list_empty(&shost->eh_abort_list) &&
192 list_empty(&shost->eh_cmd_q))
193 if (shost->eh_deadline != -1)
194 shost->last_reset = 0;
195
196 spin_unlock_irqrestore(shost->host_lock, flags);
197
198 if (!scsi_noretry_cmd(scmd) &&
199 scsi_cmd_retry_allowed(scmd) &&
200 scsi_eh_should_retry_cmd(scmd)) {
201 SCSI_LOG_ERROR_RECOVERY(3,
202 scmd_printk(KERN_WARNING, scmd,
203 "retry aborted command\n"));
204 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
205 } else {
206 SCSI_LOG_ERROR_RECOVERY(3,
207 scmd_printk(KERN_WARNING, scmd,
208 "finish aborted command\n"));
209 scsi_finish_command(scmd);
210 }
211 return;
212
213out:
214 spin_lock_irqsave(shost->host_lock, flags);
215 list_del_init(&scmd->eh_entry);
216 spin_unlock_irqrestore(shost->host_lock, flags);
217
218 scsi_eh_scmd_add(scmd);
219}
220
221/**
222 * scsi_abort_command - schedule a command abort
223 * @scmd: scmd to abort.
224 *
225 * We only need to abort commands after a command timeout
226 */
227static int
228scsi_abort_command(struct scsi_cmnd *scmd)
229{
230 struct scsi_device *sdev = scmd->device;
231 struct Scsi_Host *shost = sdev->host;
232 unsigned long flags;
233
234 if (!shost->hostt->eh_abort_handler) {
235 /* No abort handler, fail command directly */
236 return FAILED;
237 }
238
239 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
240 /*
241 * Retry after abort failed, escalate to next level.
242 */
243 SCSI_LOG_ERROR_RECOVERY(3,
244 scmd_printk(KERN_INFO, scmd,
245 "previous abort failed\n"));
246 BUG_ON(delayed_work_pending(&scmd->abort_work));
247 return FAILED;
248 }
249
250 spin_lock_irqsave(shost->host_lock, flags);
251 if (shost->eh_deadline != -1 && !shost->last_reset)
252 shost->last_reset = jiffies;
253 BUG_ON(!list_empty(&scmd->eh_entry));
254 list_add_tail(&scmd->eh_entry, &shost->eh_abort_list);
255 spin_unlock_irqrestore(shost->host_lock, flags);
256
257 scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED;
258 SCSI_LOG_ERROR_RECOVERY(3,
259 scmd_printk(KERN_INFO, scmd, "abort scheduled\n"));
260 queue_delayed_work(shost->tmf_work_q, &scmd->abort_work, HZ / 100);
261 return SUCCESS;
262}
263
264/**
265 * scsi_eh_reset - call into ->eh_action to reset internal counters
266 * @scmd: scmd to run eh on.
267 *
268 * The scsi driver might be carrying internal state about the
269 * devices, so we need to call into the driver to reset the
270 * internal state once the error handler is started.
271 */
272static void scsi_eh_reset(struct scsi_cmnd *scmd)
273{
274 if (!blk_rq_is_passthrough(scsi_cmd_to_rq(scmd))) {
275 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
276 if (sdrv->eh_reset)
277 sdrv->eh_reset(scmd);
278 }
279}
280
281static void scsi_eh_inc_host_failed(struct rcu_head *head)
282{
283 struct scsi_cmnd *scmd = container_of(head, typeof(*scmd), rcu);
284 struct Scsi_Host *shost = scmd->device->host;
285 unsigned int busy = scsi_host_busy(shost);
286 unsigned long flags;
287
288 spin_lock_irqsave(shost->host_lock, flags);
289 shost->host_failed++;
290 scsi_eh_wakeup(shost, busy);
291 spin_unlock_irqrestore(shost->host_lock, flags);
292}
293
294/**
295 * scsi_eh_scmd_add - add scsi cmd to error handling.
296 * @scmd: scmd to run eh on.
297 */
298void scsi_eh_scmd_add(struct scsi_cmnd *scmd)
299{
300 struct Scsi_Host *shost = scmd->device->host;
301 unsigned long flags;
302 int ret;
303
304 WARN_ON_ONCE(!shost->ehandler);
305 WARN_ON_ONCE(!test_bit(SCMD_STATE_INFLIGHT, &scmd->state));
306
307 spin_lock_irqsave(shost->host_lock, flags);
308 if (scsi_host_set_state(shost, SHOST_RECOVERY)) {
309 ret = scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY);
310 WARN_ON_ONCE(ret);
311 }
312 if (shost->eh_deadline != -1 && !shost->last_reset)
313 shost->last_reset = jiffies;
314
315 scsi_eh_reset(scmd);
316 list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
317 spin_unlock_irqrestore(shost->host_lock, flags);
318 /*
319 * Ensure that all tasks observe the host state change before the
320 * host_failed change.
321 */
322 call_rcu_hurry(&scmd->rcu, scsi_eh_inc_host_failed);
323}
324
325/**
326 * scsi_timeout - Timeout function for normal scsi commands.
327 * @req: request that is timing out.
328 *
329 * Notes:
330 * We do not need to lock this. There is the potential for a race
331 * only in that the normal completion handling might run, but if the
332 * normal completion function determines that the timer has already
333 * fired, then it mustn't do anything.
334 */
335enum blk_eh_timer_return scsi_timeout(struct request *req)
336{
337 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
338 struct Scsi_Host *host = scmd->device->host;
339
340 trace_scsi_dispatch_cmd_timeout(scmd);
341 scsi_log_completion(scmd, TIMEOUT_ERROR);
342
343 atomic_inc(&scmd->device->iotmo_cnt);
344 if (host->eh_deadline != -1 && !host->last_reset)
345 host->last_reset = jiffies;
346
347 if (host->hostt->eh_timed_out) {
348 switch (host->hostt->eh_timed_out(scmd)) {
349 case SCSI_EH_DONE:
350 return BLK_EH_DONE;
351 case SCSI_EH_RESET_TIMER:
352 return BLK_EH_RESET_TIMER;
353 case SCSI_EH_NOT_HANDLED:
354 break;
355 }
356 }
357
358 /*
359 * If scsi_done() has already set SCMD_STATE_COMPLETE, do not modify
360 * *scmd.
361 */
362 if (test_and_set_bit(SCMD_STATE_COMPLETE, &scmd->state))
363 return BLK_EH_DONE;
364 atomic_inc(&scmd->device->iodone_cnt);
365 if (scsi_abort_command(scmd) != SUCCESS) {
366 set_host_byte(scmd, DID_TIME_OUT);
367 scsi_eh_scmd_add(scmd);
368 }
369
370 return BLK_EH_DONE;
371}
372
373/**
374 * scsi_block_when_processing_errors - Prevent cmds from being queued.
375 * @sdev: Device on which we are performing recovery.
376 *
377 * Description:
378 * We block until the host is out of error recovery, and then check to
379 * see whether the host or the device is offline.
380 *
381 * Return value:
382 * 0 when dev was taken offline by error recovery. 1 OK to proceed.
383 */
384int scsi_block_when_processing_errors(struct scsi_device *sdev)
385{
386 int online;
387
388 wait_event(sdev->host->host_wait, !scsi_host_in_recovery(sdev->host));
389
390 online = scsi_device_online(sdev);
391
392 return online;
393}
394EXPORT_SYMBOL(scsi_block_when_processing_errors);
395
396#ifdef CONFIG_SCSI_LOGGING
397/**
398 * scsi_eh_prt_fail_stats - Log info on failures.
399 * @shost: scsi host being recovered.
400 * @work_q: Queue of scsi cmds to process.
401 */
402static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
403 struct list_head *work_q)
404{
405 struct scsi_cmnd *scmd;
406 struct scsi_device *sdev;
407 int total_failures = 0;
408 int cmd_failed = 0;
409 int cmd_cancel = 0;
410 int devices_failed = 0;
411
412 shost_for_each_device(sdev, shost) {
413 list_for_each_entry(scmd, work_q, eh_entry) {
414 if (scmd->device == sdev) {
415 ++total_failures;
416 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED)
417 ++cmd_cancel;
418 else
419 ++cmd_failed;
420 }
421 }
422
423 if (cmd_cancel || cmd_failed) {
424 SCSI_LOG_ERROR_RECOVERY(3,
425 shost_printk(KERN_INFO, shost,
426 "%s: cmds failed: %d, cancel: %d\n",
427 __func__, cmd_failed,
428 cmd_cancel));
429 cmd_cancel = 0;
430 cmd_failed = 0;
431 ++devices_failed;
432 }
433 }
434
435 SCSI_LOG_ERROR_RECOVERY(2, shost_printk(KERN_INFO, shost,
436 "Total of %d commands on %d"
437 " devices require eh work\n",
438 total_failures, devices_failed));
439}
440#endif
441
442 /**
443 * scsi_report_lun_change - Set flag on all *other* devices on the same target
444 * to indicate that a UNIT ATTENTION is expected.
445 * @sdev: Device reporting the UNIT ATTENTION
446 */
447static void scsi_report_lun_change(struct scsi_device *sdev)
448{
449 sdev->sdev_target->expecting_lun_change = 1;
450}
451
452/**
453 * scsi_report_sense - Examine scsi sense information and log messages for
454 * certain conditions, also issue uevents for some of them.
455 * @sdev: Device reporting the sense code
456 * @sshdr: sshdr to be examined
457 */
458static void scsi_report_sense(struct scsi_device *sdev,
459 struct scsi_sense_hdr *sshdr)
460{
461 enum scsi_device_event evt_type = SDEV_EVT_MAXBITS; /* i.e. none */
462
463 if (sshdr->sense_key == UNIT_ATTENTION) {
464 if (sshdr->asc == 0x3f && sshdr->ascq == 0x03) {
465 evt_type = SDEV_EVT_INQUIRY_CHANGE_REPORTED;
466 sdev_printk(KERN_WARNING, sdev,
467 "Inquiry data has changed");
468 } else if (sshdr->asc == 0x3f && sshdr->ascq == 0x0e) {
469 evt_type = SDEV_EVT_LUN_CHANGE_REPORTED;
470 scsi_report_lun_change(sdev);
471 sdev_printk(KERN_WARNING, sdev,
472 "LUN assignments on this target have "
473 "changed. The Linux SCSI layer does not "
474 "automatically remap LUN assignments.\n");
475 } else if (sshdr->asc == 0x3f)
476 sdev_printk(KERN_WARNING, sdev,
477 "Operating parameters on this target have "
478 "changed. The Linux SCSI layer does not "
479 "automatically adjust these parameters.\n");
480
481 if (sshdr->asc == 0x38 && sshdr->ascq == 0x07) {
482 evt_type = SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED;
483 sdev_printk(KERN_WARNING, sdev,
484 "Warning! Received an indication that the "
485 "LUN reached a thin provisioning soft "
486 "threshold.\n");
487 }
488
489 if (sshdr->asc == 0x29) {
490 evt_type = SDEV_EVT_POWER_ON_RESET_OCCURRED;
491 /*
492 * Do not print message if it is an expected side-effect
493 * of runtime PM.
494 */
495 if (!sdev->silence_suspend)
496 sdev_printk(KERN_WARNING, sdev,
497 "Power-on or device reset occurred\n");
498 }
499
500 if (sshdr->asc == 0x2a && sshdr->ascq == 0x01) {
501 evt_type = SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED;
502 sdev_printk(KERN_WARNING, sdev,
503 "Mode parameters changed");
504 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x06) {
505 evt_type = SDEV_EVT_ALUA_STATE_CHANGE_REPORTED;
506 sdev_printk(KERN_WARNING, sdev,
507 "Asymmetric access state changed");
508 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x09) {
509 evt_type = SDEV_EVT_CAPACITY_CHANGE_REPORTED;
510 sdev_printk(KERN_WARNING, sdev,
511 "Capacity data has changed");
512 } else if (sshdr->asc == 0x2a)
513 sdev_printk(KERN_WARNING, sdev,
514 "Parameters changed");
515 }
516
517 if (evt_type != SDEV_EVT_MAXBITS) {
518 set_bit(evt_type, sdev->pending_events);
519 schedule_work(&sdev->event_work);
520 }
521}
522
523static inline void set_scsi_ml_byte(struct scsi_cmnd *cmd, u8 status)
524{
525 cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
526}
527
528/**
529 * scsi_check_sense - Examine scsi cmd sense
530 * @scmd: Cmd to have sense checked.
531 *
532 * Return value:
533 * SUCCESS or FAILED or NEEDS_RETRY or ADD_TO_MLQUEUE
534 *
535 * Notes:
536 * When a deferred error is detected the current command has
537 * not been executed and needs retrying.
538 */
539enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
540{
541 struct request *req = scsi_cmd_to_rq(scmd);
542 struct scsi_device *sdev = scmd->device;
543 struct scsi_sense_hdr sshdr;
544
545 if (! scsi_command_normalize_sense(scmd, &sshdr))
546 return FAILED; /* no valid sense data */
547
548 scsi_report_sense(sdev, &sshdr);
549
550 if (scsi_sense_is_deferred(&sshdr))
551 return NEEDS_RETRY;
552
553 if (sdev->handler && sdev->handler->check_sense) {
554 enum scsi_disposition rc;
555
556 rc = sdev->handler->check_sense(sdev, &sshdr);
557 if (rc != SCSI_RETURN_NOT_HANDLED)
558 return rc;
559 /* handler does not care. Drop down to default handling */
560 }
561
562 if (scmd->cmnd[0] == TEST_UNIT_READY &&
563 scmd->submitter != SUBMITTED_BY_SCSI_ERROR_HANDLER)
564 /*
565 * nasty: for mid-layer issued TURs, we need to return the
566 * actual sense data without any recovery attempt. For eh
567 * issued ones, we need to try to recover and interpret
568 */
569 return SUCCESS;
570
571 /*
572 * Previous logic looked for FILEMARK, EOM or ILI which are
573 * mainly associated with tapes and returned SUCCESS.
574 */
575 if (sshdr.response_code == 0x70) {
576 /* fixed format */
577 if (scmd->sense_buffer[2] & 0xe0)
578 return SUCCESS;
579 } else {
580 /*
581 * descriptor format: look for "stream commands sense data
582 * descriptor" (see SSC-3). Assume single sense data
583 * descriptor. Ignore ILI from SBC-2 READ LONG and WRITE LONG.
584 */
585 if ((sshdr.additional_length > 3) &&
586 (scmd->sense_buffer[8] == 0x4) &&
587 (scmd->sense_buffer[11] & 0xe0))
588 return SUCCESS;
589 }
590
591 switch (sshdr.sense_key) {
592 case NO_SENSE:
593 return SUCCESS;
594 case RECOVERED_ERROR:
595 return /* soft_error */ SUCCESS;
596
597 case ABORTED_COMMAND:
598 if (sshdr.asc == 0x10) /* DIF */
599 return SUCCESS;
600
601 /*
602 * Check aborts due to command duration limit policy:
603 * ABORTED COMMAND additional sense code with the
604 * COMMAND TIMEOUT BEFORE PROCESSING or
605 * COMMAND TIMEOUT DURING PROCESSING or
606 * COMMAND TIMEOUT DURING PROCESSING DUE TO ERROR RECOVERY
607 * additional sense code qualifiers.
608 */
609 if (sshdr.asc == 0x2e &&
610 sshdr.ascq >= 0x01 && sshdr.ascq <= 0x03) {
611 set_scsi_ml_byte(scmd, SCSIML_STAT_DL_TIMEOUT);
612 req->cmd_flags |= REQ_FAILFAST_DEV;
613 req->rq_flags |= RQF_QUIET;
614 return SUCCESS;
615 }
616
617 if (sshdr.asc == 0x44 && sdev->sdev_bflags & BLIST_RETRY_ITF)
618 return ADD_TO_MLQUEUE;
619 if (sshdr.asc == 0xc1 && sshdr.ascq == 0x01 &&
620 sdev->sdev_bflags & BLIST_RETRY_ASC_C1)
621 return ADD_TO_MLQUEUE;
622
623 return NEEDS_RETRY;
624 case NOT_READY:
625 case UNIT_ATTENTION:
626 /*
627 * if we are expecting a cc/ua because of a bus reset that we
628 * performed, treat this just as a retry. otherwise this is
629 * information that we should pass up to the upper-level driver
630 * so that we can deal with it there.
631 */
632 if (scmd->device->expecting_cc_ua) {
633 /*
634 * Because some device does not queue unit
635 * attentions correctly, we carefully check
636 * additional sense code and qualifier so as
637 * not to squash media change unit attention.
638 */
639 if (sshdr.asc != 0x28 || sshdr.ascq != 0x00) {
640 scmd->device->expecting_cc_ua = 0;
641 return NEEDS_RETRY;
642 }
643 }
644 /*
645 * we might also expect a cc/ua if another LUN on the target
646 * reported a UA with an ASC/ASCQ of 3F 0E -
647 * REPORTED LUNS DATA HAS CHANGED.
648 */
649 if (scmd->device->sdev_target->expecting_lun_change &&
650 sshdr.asc == 0x3f && sshdr.ascq == 0x0e)
651 return NEEDS_RETRY;
652 /*
653 * if the device is in the process of becoming ready, we
654 * should retry.
655 */
656 if ((sshdr.asc == 0x04) && (sshdr.ascq == 0x01))
657 return NEEDS_RETRY;
658 /*
659 * if the device is not started, we need to wake
660 * the error handler to start the motor
661 */
662 if (scmd->device->allow_restart &&
663 (sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
664 return FAILED;
665 /*
666 * Pass the UA upwards for a determination in the completion
667 * functions.
668 */
669 return SUCCESS;
670
671 /* these are not supported */
672 case DATA_PROTECT:
673 if (sshdr.asc == 0x27 && sshdr.ascq == 0x07) {
674 /* Thin provisioning hard threshold reached */
675 set_scsi_ml_byte(scmd, SCSIML_STAT_NOSPC);
676 return SUCCESS;
677 }
678 fallthrough;
679 case COPY_ABORTED:
680 case VOLUME_OVERFLOW:
681 case MISCOMPARE:
682 case BLANK_CHECK:
683 set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
684 return SUCCESS;
685
686 case MEDIUM_ERROR:
687 if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
688 sshdr.asc == 0x13 || /* AMNF DATA FIELD */
689 sshdr.asc == 0x14) { /* RECORD NOT FOUND */
690 set_scsi_ml_byte(scmd, SCSIML_STAT_MED_ERROR);
691 return SUCCESS;
692 }
693 return NEEDS_RETRY;
694
695 case HARDWARE_ERROR:
696 if (scmd->device->retry_hwerror)
697 return ADD_TO_MLQUEUE;
698 else
699 set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
700 fallthrough;
701
702 case ILLEGAL_REQUEST:
703 if (sshdr.asc == 0x20 || /* Invalid command operation code */
704 sshdr.asc == 0x21 || /* Logical block address out of range */
705 sshdr.asc == 0x22 || /* Invalid function */
706 sshdr.asc == 0x24 || /* Invalid field in cdb */
707 sshdr.asc == 0x26 || /* Parameter value invalid */
708 sshdr.asc == 0x27) { /* Write protected */
709 set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
710 }
711 return SUCCESS;
712
713 case COMPLETED:
714 if (sshdr.asc == 0x55 && sshdr.ascq == 0x0a) {
715 set_scsi_ml_byte(scmd, SCSIML_STAT_DL_TIMEOUT);
716 req->cmd_flags |= REQ_FAILFAST_DEV;
717 req->rq_flags |= RQF_QUIET;
718 }
719 return SUCCESS;
720
721 default:
722 return SUCCESS;
723 }
724}
725EXPORT_SYMBOL_GPL(scsi_check_sense);
726
727static void scsi_handle_queue_ramp_up(struct scsi_device *sdev)
728{
729 const struct scsi_host_template *sht = sdev->host->hostt;
730 struct scsi_device *tmp_sdev;
731
732 if (!sht->track_queue_depth ||
733 sdev->queue_depth >= sdev->max_queue_depth)
734 return;
735
736 if (time_before(jiffies,
737 sdev->last_queue_ramp_up + sdev->queue_ramp_up_period))
738 return;
739
740 if (time_before(jiffies,
741 sdev->last_queue_full_time + sdev->queue_ramp_up_period))
742 return;
743
744 /*
745 * Walk all devices of a target and do
746 * ramp up on them.
747 */
748 shost_for_each_device(tmp_sdev, sdev->host) {
749 if (tmp_sdev->channel != sdev->channel ||
750 tmp_sdev->id != sdev->id ||
751 tmp_sdev->queue_depth == sdev->max_queue_depth)
752 continue;
753
754 scsi_change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1);
755 sdev->last_queue_ramp_up = jiffies;
756 }
757}
758
759static void scsi_handle_queue_full(struct scsi_device *sdev)
760{
761 const struct scsi_host_template *sht = sdev->host->hostt;
762 struct scsi_device *tmp_sdev;
763
764 if (!sht->track_queue_depth)
765 return;
766
767 shost_for_each_device(tmp_sdev, sdev->host) {
768 if (tmp_sdev->channel != sdev->channel ||
769 tmp_sdev->id != sdev->id)
770 continue;
771 /*
772 * We do not know the number of commands that were at
773 * the device when we got the queue full so we start
774 * from the highest possible value and work our way down.
775 */
776 scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1);
777 }
778}
779
780/**
781 * scsi_eh_completed_normally - Disposition a eh cmd on return from LLD.
782 * @scmd: SCSI cmd to examine.
783 *
784 * Notes:
785 * This is *only* called when we are examining the status of commands
786 * queued during error recovery. the main difference here is that we
787 * don't allow for the possibility of retries here, and we are a lot
788 * more restrictive about what we consider acceptable.
789 */
790static enum scsi_disposition scsi_eh_completed_normally(struct scsi_cmnd *scmd)
791{
792 /*
793 * first check the host byte, to see if there is anything in there
794 * that would indicate what we need to do.
795 */
796 if (host_byte(scmd->result) == DID_RESET) {
797 /*
798 * rats. we are already in the error handler, so we now
799 * get to try and figure out what to do next. if the sense
800 * is valid, we have a pretty good idea of what to do.
801 * if not, we mark it as FAILED.
802 */
803 return scsi_check_sense(scmd);
804 }
805 if (host_byte(scmd->result) != DID_OK)
806 return FAILED;
807
808 /*
809 * now, check the status byte to see if this indicates
810 * anything special.
811 */
812 switch (get_status_byte(scmd)) {
813 case SAM_STAT_GOOD:
814 scsi_handle_queue_ramp_up(scmd->device);
815 if (scmd->sense_buffer && SCSI_SENSE_VALID(scmd))
816 /*
817 * If we have sense data, call scsi_check_sense() in
818 * order to set the correct SCSI ML byte (if any).
819 * No point in checking the return value, since the
820 * command has already completed successfully.
821 */
822 scsi_check_sense(scmd);
823 fallthrough;
824 case SAM_STAT_COMMAND_TERMINATED:
825 return SUCCESS;
826 case SAM_STAT_CHECK_CONDITION:
827 return scsi_check_sense(scmd);
828 case SAM_STAT_CONDITION_MET:
829 case SAM_STAT_INTERMEDIATE:
830 case SAM_STAT_INTERMEDIATE_CONDITION_MET:
831 /*
832 * who knows? FIXME(eric)
833 */
834 return SUCCESS;
835 case SAM_STAT_RESERVATION_CONFLICT:
836 if (scmd->cmnd[0] == TEST_UNIT_READY)
837 /* it is a success, we probed the device and
838 * found it */
839 return SUCCESS;
840 /* otherwise, we failed to send the command */
841 return FAILED;
842 case SAM_STAT_TASK_SET_FULL:
843 scsi_handle_queue_full(scmd->device);
844 fallthrough;
845 case SAM_STAT_BUSY:
846 return NEEDS_RETRY;
847 default:
848 return FAILED;
849 }
850 return FAILED;
851}
852
853/**
854 * scsi_eh_done - Completion function for error handling.
855 * @scmd: Cmd that is done.
856 */
857void scsi_eh_done(struct scsi_cmnd *scmd)
858{
859 struct completion *eh_action;
860
861 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
862 "%s result: %x\n", __func__, scmd->result));
863
864 eh_action = scmd->device->host->eh_action;
865 if (eh_action)
866 complete(eh_action);
867}
868
869/**
870 * scsi_try_host_reset - ask host adapter to reset itself
871 * @scmd: SCSI cmd to send host reset.
872 */
873static enum scsi_disposition scsi_try_host_reset(struct scsi_cmnd *scmd)
874{
875 unsigned long flags;
876 enum scsi_disposition rtn;
877 struct Scsi_Host *host = scmd->device->host;
878 const struct scsi_host_template *hostt = host->hostt;
879
880 SCSI_LOG_ERROR_RECOVERY(3,
881 shost_printk(KERN_INFO, host, "Snd Host RST\n"));
882
883 if (!hostt->eh_host_reset_handler)
884 return FAILED;
885
886 rtn = hostt->eh_host_reset_handler(scmd);
887
888 if (rtn == SUCCESS) {
889 if (!hostt->skip_settle_delay)
890 ssleep(HOST_RESET_SETTLE_TIME);
891 spin_lock_irqsave(host->host_lock, flags);
892 scsi_report_bus_reset(host, scmd_channel(scmd));
893 spin_unlock_irqrestore(host->host_lock, flags);
894 }
895
896 return rtn;
897}
898
899/**
900 * scsi_try_bus_reset - ask host to perform a bus reset
901 * @scmd: SCSI cmd to send bus reset.
902 */
903static enum scsi_disposition scsi_try_bus_reset(struct scsi_cmnd *scmd)
904{
905 unsigned long flags;
906 enum scsi_disposition rtn;
907 struct Scsi_Host *host = scmd->device->host;
908 const struct scsi_host_template *hostt = host->hostt;
909
910 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
911 "%s: Snd Bus RST\n", __func__));
912
913 if (!hostt->eh_bus_reset_handler)
914 return FAILED;
915
916 rtn = hostt->eh_bus_reset_handler(scmd);
917
918 if (rtn == SUCCESS) {
919 if (!hostt->skip_settle_delay)
920 ssleep(BUS_RESET_SETTLE_TIME);
921 spin_lock_irqsave(host->host_lock, flags);
922 scsi_report_bus_reset(host, scmd_channel(scmd));
923 spin_unlock_irqrestore(host->host_lock, flags);
924 }
925
926 return rtn;
927}
928
929static void __scsi_report_device_reset(struct scsi_device *sdev, void *data)
930{
931 sdev->was_reset = 1;
932 sdev->expecting_cc_ua = 1;
933}
934
935/**
936 * scsi_try_target_reset - Ask host to perform a target reset
937 * @scmd: SCSI cmd used to send a target reset
938 *
939 * Notes:
940 * There is no timeout for this operation. if this operation is
941 * unreliable for a given host, then the host itself needs to put a
942 * timer on it, and set the host back to a consistent state prior to
943 * returning.
944 */
945static enum scsi_disposition scsi_try_target_reset(struct scsi_cmnd *scmd)
946{
947 unsigned long flags;
948 enum scsi_disposition rtn;
949 struct Scsi_Host *host = scmd->device->host;
950 const struct scsi_host_template *hostt = host->hostt;
951
952 if (!hostt->eh_target_reset_handler)
953 return FAILED;
954
955 rtn = hostt->eh_target_reset_handler(scmd);
956 if (rtn == SUCCESS) {
957 spin_lock_irqsave(host->host_lock, flags);
958 __starget_for_each_device(scsi_target(scmd->device), NULL,
959 __scsi_report_device_reset);
960 spin_unlock_irqrestore(host->host_lock, flags);
961 }
962
963 return rtn;
964}
965
966/**
967 * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
968 * @scmd: SCSI cmd used to send BDR
969 *
970 * Notes:
971 * There is no timeout for this operation. if this operation is
972 * unreliable for a given host, then the host itself needs to put a
973 * timer on it, and set the host back to a consistent state prior to
974 * returning.
975 */
976static enum scsi_disposition scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
977{
978 enum scsi_disposition rtn;
979 const struct scsi_host_template *hostt = scmd->device->host->hostt;
980
981 if (!hostt->eh_device_reset_handler)
982 return FAILED;
983
984 rtn = hostt->eh_device_reset_handler(scmd);
985 if (rtn == SUCCESS)
986 __scsi_report_device_reset(scmd->device, NULL);
987 return rtn;
988}
989
990/**
991 * scsi_try_to_abort_cmd - Ask host to abort a SCSI command
992 * @hostt: SCSI driver host template
993 * @scmd: SCSI cmd used to send a target reset
994 *
995 * Return value:
996 * SUCCESS, FAILED, or FAST_IO_FAIL
997 *
998 * Notes:
999 * SUCCESS does not necessarily indicate that the command
1000 * has been aborted; it only indicates that the LLDDs
1001 * has cleared all references to that command.
1002 * LLDDs should return FAILED only if an abort was required
1003 * but could not be executed. LLDDs should return FAST_IO_FAIL
1004 * if the device is temporarily unavailable (eg due to a
1005 * link down on FibreChannel)
1006 */
1007static enum scsi_disposition
1008scsi_try_to_abort_cmd(const struct scsi_host_template *hostt, struct scsi_cmnd *scmd)
1009{
1010 if (!hostt->eh_abort_handler)
1011 return FAILED;
1012
1013 return hostt->eh_abort_handler(scmd);
1014}
1015
1016static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
1017{
1018 if (scsi_try_to_abort_cmd(scmd->device->host->hostt, scmd) != SUCCESS)
1019 if (scsi_try_bus_device_reset(scmd) != SUCCESS)
1020 if (scsi_try_target_reset(scmd) != SUCCESS)
1021 if (scsi_try_bus_reset(scmd) != SUCCESS)
1022 scsi_try_host_reset(scmd);
1023}
1024
1025/**
1026 * scsi_eh_prep_cmnd - Save a scsi command info as part of error recovery
1027 * @scmd: SCSI command structure to hijack
1028 * @ses: structure to save restore information
1029 * @cmnd: CDB to send. Can be NULL if no new cmnd is needed
1030 * @cmnd_size: size in bytes of @cmnd (must be <= MAX_COMMAND_SIZE)
1031 * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
1032 *
1033 * This function is used to save a scsi command information before re-execution
1034 * as part of the error recovery process. If @sense_bytes is 0 the command
1035 * sent must be one that does not transfer any data. If @sense_bytes != 0
1036 * @cmnd is ignored and this functions sets up a REQUEST_SENSE command
1037 * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer.
1038 */
1039void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
1040 unsigned char *cmnd, int cmnd_size, unsigned sense_bytes)
1041{
1042 struct scsi_device *sdev = scmd->device;
1043
1044 /*
1045 * We need saved copies of a number of fields - this is because
1046 * error handling may need to overwrite these with different values
1047 * to run different commands, and once error handling is complete,
1048 * we will need to restore these values prior to running the actual
1049 * command.
1050 */
1051 ses->cmd_len = scmd->cmd_len;
1052 ses->data_direction = scmd->sc_data_direction;
1053 ses->sdb = scmd->sdb;
1054 ses->result = scmd->result;
1055 ses->resid_len = scmd->resid_len;
1056 ses->underflow = scmd->underflow;
1057 ses->prot_op = scmd->prot_op;
1058 ses->eh_eflags = scmd->eh_eflags;
1059
1060 scmd->prot_op = SCSI_PROT_NORMAL;
1061 scmd->eh_eflags = 0;
1062 memcpy(ses->cmnd, scmd->cmnd, sizeof(ses->cmnd));
1063 memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
1064 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
1065 scmd->result = 0;
1066 scmd->resid_len = 0;
1067
1068 if (sense_bytes) {
1069 scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
1070 sense_bytes);
1071 sg_init_one(&ses->sense_sgl, scmd->sense_buffer,
1072 scmd->sdb.length);
1073 scmd->sdb.table.sgl = &ses->sense_sgl;
1074 scmd->sc_data_direction = DMA_FROM_DEVICE;
1075 scmd->sdb.table.nents = scmd->sdb.table.orig_nents = 1;
1076 scmd->cmnd[0] = REQUEST_SENSE;
1077 scmd->cmnd[4] = scmd->sdb.length;
1078 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
1079 } else {
1080 scmd->sc_data_direction = DMA_NONE;
1081 if (cmnd) {
1082 BUG_ON(cmnd_size > sizeof(scmd->cmnd));
1083 memcpy(scmd->cmnd, cmnd, cmnd_size);
1084 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
1085 }
1086 }
1087
1088 scmd->underflow = 0;
1089
1090 if (sdev->scsi_level <= SCSI_2 && sdev->scsi_level != SCSI_UNKNOWN)
1091 scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
1092 (sdev->lun << 5 & 0xe0);
1093
1094 /*
1095 * Zero the sense buffer. The scsi spec mandates that any
1096 * untransferred sense data should be interpreted as being zero.
1097 */
1098 memset(scmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1099}
1100EXPORT_SYMBOL(scsi_eh_prep_cmnd);
1101
1102/**
1103 * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recovery
1104 * @scmd: SCSI command structure to restore
1105 * @ses: saved information from a coresponding call to scsi_eh_prep_cmnd
1106 *
1107 * Undo any damage done by above scsi_eh_prep_cmnd().
1108 */
1109void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
1110{
1111 /*
1112 * Restore original data
1113 */
1114 scmd->cmd_len = ses->cmd_len;
1115 memcpy(scmd->cmnd, ses->cmnd, sizeof(ses->cmnd));
1116 scmd->sc_data_direction = ses->data_direction;
1117 scmd->sdb = ses->sdb;
1118 scmd->result = ses->result;
1119 scmd->resid_len = ses->resid_len;
1120 scmd->underflow = ses->underflow;
1121 scmd->prot_op = ses->prot_op;
1122 scmd->eh_eflags = ses->eh_eflags;
1123}
1124EXPORT_SYMBOL(scsi_eh_restore_cmnd);
1125
1126/**
1127 * scsi_send_eh_cmnd - submit a scsi command as part of error recovery
1128 * @scmd: SCSI command structure to hijack
1129 * @cmnd: CDB to send
1130 * @cmnd_size: size in bytes of @cmnd
1131 * @timeout: timeout for this request
1132 * @sense_bytes: size of sense data to copy or 0
1133 *
1134 * This function is used to send a scsi command down to a target device
1135 * as part of the error recovery process. See also scsi_eh_prep_cmnd() above.
1136 *
1137 * Return value:
1138 * SUCCESS or FAILED or NEEDS_RETRY
1139 */
1140static enum scsi_disposition scsi_send_eh_cmnd(struct scsi_cmnd *scmd,
1141 unsigned char *cmnd, int cmnd_size, int timeout, unsigned sense_bytes)
1142{
1143 struct scsi_device *sdev = scmd->device;
1144 struct Scsi_Host *shost = sdev->host;
1145 DECLARE_COMPLETION_ONSTACK(done);
1146 unsigned long timeleft = timeout, delay;
1147 struct scsi_eh_save ses;
1148 const unsigned long stall_for = msecs_to_jiffies(100);
1149 int rtn;
1150
1151retry:
1152 scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes);
1153 shost->eh_action = &done;
1154
1155 scsi_log_send(scmd);
1156 scmd->submitter = SUBMITTED_BY_SCSI_ERROR_HANDLER;
1157 scmd->flags |= SCMD_LAST;
1158
1159 /*
1160 * Lock sdev->state_mutex to avoid that scsi_device_quiesce() can
1161 * change the SCSI device state after we have examined it and before
1162 * .queuecommand() is called.
1163 */
1164 mutex_lock(&sdev->state_mutex);
1165 while (sdev->sdev_state == SDEV_BLOCK && timeleft > 0) {
1166 mutex_unlock(&sdev->state_mutex);
1167 SCSI_LOG_ERROR_RECOVERY(5, sdev_printk(KERN_DEBUG, sdev,
1168 "%s: state %d <> %d\n", __func__, sdev->sdev_state,
1169 SDEV_BLOCK));
1170 delay = min(timeleft, stall_for);
1171 timeleft -= delay;
1172 msleep(jiffies_to_msecs(delay));
1173 mutex_lock(&sdev->state_mutex);
1174 }
1175 if (sdev->sdev_state != SDEV_BLOCK)
1176 rtn = shost->hostt->queuecommand(shost, scmd);
1177 else
1178 rtn = FAILED;
1179 mutex_unlock(&sdev->state_mutex);
1180
1181 if (rtn) {
1182 if (timeleft > stall_for) {
1183 scsi_eh_restore_cmnd(scmd, &ses);
1184
1185 timeleft -= stall_for;
1186 msleep(jiffies_to_msecs(stall_for));
1187 goto retry;
1188 }
1189 /* signal not to enter either branch of the if () below */
1190 timeleft = 0;
1191 rtn = FAILED;
1192 } else {
1193 timeleft = wait_for_completion_timeout(&done, timeout);
1194 rtn = SUCCESS;
1195 }
1196
1197 shost->eh_action = NULL;
1198
1199 scsi_log_completion(scmd, rtn);
1200
1201 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1202 "%s timeleft: %ld\n",
1203 __func__, timeleft));
1204
1205 /*
1206 * If there is time left scsi_eh_done got called, and we will examine
1207 * the actual status codes to see whether the command actually did
1208 * complete normally, else if we have a zero return and no time left,
1209 * the command must still be pending, so abort it and return FAILED.
1210 * If we never actually managed to issue the command, because
1211 * ->queuecommand() kept returning non zero, use the rtn = FAILED
1212 * value above (so don't execute either branch of the if)
1213 */
1214 if (timeleft) {
1215 rtn = scsi_eh_completed_normally(scmd);
1216 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1217 "%s: scsi_eh_completed_normally %x\n", __func__, rtn));
1218
1219 switch (rtn) {
1220 case SUCCESS:
1221 case NEEDS_RETRY:
1222 case FAILED:
1223 break;
1224 case ADD_TO_MLQUEUE:
1225 rtn = NEEDS_RETRY;
1226 break;
1227 default:
1228 rtn = FAILED;
1229 break;
1230 }
1231 } else if (rtn != FAILED) {
1232 scsi_abort_eh_cmnd(scmd);
1233 rtn = FAILED;
1234 }
1235
1236 scsi_eh_restore_cmnd(scmd, &ses);
1237
1238 return rtn;
1239}
1240
1241/**
1242 * scsi_request_sense - Request sense data from a particular target.
1243 * @scmd: SCSI cmd for request sense.
1244 *
1245 * Notes:
1246 * Some hosts automatically obtain this information, others require
1247 * that we obtain it on our own. This function will *not* return until
1248 * the command either times out, or it completes.
1249 */
1250static enum scsi_disposition scsi_request_sense(struct scsi_cmnd *scmd)
1251{
1252 return scsi_send_eh_cmnd(scmd, NULL, 0, scmd->device->eh_timeout, ~0);
1253}
1254
1255static enum scsi_disposition
1256scsi_eh_action(struct scsi_cmnd *scmd, enum scsi_disposition rtn)
1257{
1258 if (!blk_rq_is_passthrough(scsi_cmd_to_rq(scmd))) {
1259 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
1260 if (sdrv->eh_action)
1261 rtn = sdrv->eh_action(scmd, rtn);
1262 }
1263 return rtn;
1264}
1265
1266/**
1267 * scsi_eh_finish_cmd - Handle a cmd that eh is finished with.
1268 * @scmd: Original SCSI cmd that eh has finished.
1269 * @done_q: Queue for processed commands.
1270 *
1271 * Notes:
1272 * We don't want to use the normal command completion while we are are
1273 * still handling errors - it may cause other commands to be queued,
1274 * and that would disturb what we are doing. Thus we really want to
1275 * keep a list of pending commands for final completion, and once we
1276 * are ready to leave error handling we handle completion for real.
1277 */
1278void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
1279{
1280 list_move_tail(&scmd->eh_entry, done_q);
1281}
1282EXPORT_SYMBOL(scsi_eh_finish_cmd);
1283
1284/**
1285 * scsi_eh_get_sense - Get device sense data.
1286 * @work_q: Queue of commands to process.
1287 * @done_q: Queue of processed commands.
1288 *
1289 * Description:
1290 * See if we need to request sense information. if so, then get it
1291 * now, so we have a better idea of what to do.
1292 *
1293 * Notes:
1294 * This has the unfortunate side effect that if a shost adapter does
1295 * not automatically request sense information, we end up shutting
1296 * it down before we request it.
1297 *
1298 * All drivers should request sense information internally these days,
1299 * so for now all I have to say is tough noogies if you end up in here.
1300 *
1301 * XXX: Long term this code should go away, but that needs an audit of
1302 * all LLDDs first.
1303 */
1304int scsi_eh_get_sense(struct list_head *work_q,
1305 struct list_head *done_q)
1306{
1307 struct scsi_cmnd *scmd, *next;
1308 struct Scsi_Host *shost;
1309 enum scsi_disposition rtn;
1310
1311 /*
1312 * If SCSI_EH_ABORT_SCHEDULED has been set, it is timeout IO,
1313 * should not get sense.
1314 */
1315 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1316 if ((scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) ||
1317 SCSI_SENSE_VALID(scmd))
1318 continue;
1319
1320 shost = scmd->device->host;
1321 if (scsi_host_eh_past_deadline(shost)) {
1322 SCSI_LOG_ERROR_RECOVERY(3,
1323 scmd_printk(KERN_INFO, scmd,
1324 "%s: skip request sense, past eh deadline\n",
1325 current->comm));
1326 break;
1327 }
1328 if (!scsi_status_is_check_condition(scmd->result))
1329 /*
1330 * don't request sense if there's no check condition
1331 * status because the error we're processing isn't one
1332 * that has a sense code (and some devices get
1333 * confused by sense requests out of the blue)
1334 */
1335 continue;
1336
1337 SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd,
1338 "%s: requesting sense\n",
1339 current->comm));
1340 rtn = scsi_request_sense(scmd);
1341 if (rtn != SUCCESS)
1342 continue;
1343
1344 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1345 "sense requested, result %x\n", scmd->result));
1346 SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd));
1347
1348 rtn = scsi_decide_disposition(scmd);
1349
1350 /*
1351 * if the result was normal, then just pass it along to the
1352 * upper level.
1353 */
1354 if (rtn == SUCCESS)
1355 /*
1356 * We don't want this command reissued, just finished
1357 * with the sense data, so set retries to the max
1358 * allowed to ensure it won't get reissued. If the user
1359 * has requested infinite retries, we also want to
1360 * finish this command, so force completion by setting
1361 * retries and allowed to the same value.
1362 */
1363 if (scmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT)
1364 scmd->retries = scmd->allowed = 1;
1365 else
1366 scmd->retries = scmd->allowed;
1367 else if (rtn != NEEDS_RETRY)
1368 continue;
1369
1370 scsi_eh_finish_cmd(scmd, done_q);
1371 }
1372
1373 return list_empty(work_q);
1374}
1375EXPORT_SYMBOL_GPL(scsi_eh_get_sense);
1376
1377/**
1378 * scsi_eh_tur - Send TUR to device.
1379 * @scmd: &scsi_cmnd to send TUR
1380 *
1381 * Return value:
1382 * 0 - Device is ready. 1 - Device NOT ready.
1383 */
1384static int scsi_eh_tur(struct scsi_cmnd *scmd)
1385{
1386 static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
1387 int retry_cnt = 1;
1388 enum scsi_disposition rtn;
1389
1390retry_tur:
1391 rtn = scsi_send_eh_cmnd(scmd, tur_command, 6,
1392 scmd->device->eh_timeout, 0);
1393
1394 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1395 "%s return: %x\n", __func__, rtn));
1396
1397 switch (rtn) {
1398 case NEEDS_RETRY:
1399 if (retry_cnt--)
1400 goto retry_tur;
1401 fallthrough;
1402 case SUCCESS:
1403 return 0;
1404 default:
1405 return 1;
1406 }
1407}
1408
1409/**
1410 * scsi_eh_test_devices - check if devices are responding from error recovery.
1411 * @cmd_list: scsi commands in error recovery.
1412 * @work_q: queue for commands which still need more error recovery
1413 * @done_q: queue for commands which are finished
1414 * @try_stu: boolean on if a STU command should be tried in addition to TUR.
1415 *
1416 * Decription:
1417 * Tests if devices are in a working state. Commands to devices now in
1418 * a working state are sent to the done_q while commands to devices which
1419 * are still failing to respond are returned to the work_q for more
1420 * processing.
1421 **/
1422static int scsi_eh_test_devices(struct list_head *cmd_list,
1423 struct list_head *work_q,
1424 struct list_head *done_q, int try_stu)
1425{
1426 struct scsi_cmnd *scmd, *next;
1427 struct scsi_device *sdev;
1428 int finish_cmds;
1429
1430 while (!list_empty(cmd_list)) {
1431 scmd = list_entry(cmd_list->next, struct scsi_cmnd, eh_entry);
1432 sdev = scmd->device;
1433
1434 if (!try_stu) {
1435 if (scsi_host_eh_past_deadline(sdev->host)) {
1436 /* Push items back onto work_q */
1437 list_splice_init(cmd_list, work_q);
1438 SCSI_LOG_ERROR_RECOVERY(3,
1439 sdev_printk(KERN_INFO, sdev,
1440 "%s: skip test device, past eh deadline",
1441 current->comm));
1442 break;
1443 }
1444 }
1445
1446 finish_cmds = !scsi_device_online(scmd->device) ||
1447 (try_stu && !scsi_eh_try_stu(scmd) &&
1448 !scsi_eh_tur(scmd)) ||
1449 !scsi_eh_tur(scmd);
1450
1451 list_for_each_entry_safe(scmd, next, cmd_list, eh_entry)
1452 if (scmd->device == sdev) {
1453 if (finish_cmds &&
1454 (try_stu ||
1455 scsi_eh_action(scmd, SUCCESS) == SUCCESS))
1456 scsi_eh_finish_cmd(scmd, done_q);
1457 else
1458 list_move_tail(&scmd->eh_entry, work_q);
1459 }
1460 }
1461 return list_empty(work_q);
1462}
1463
1464/**
1465 * scsi_eh_try_stu - Send START_UNIT to device.
1466 * @scmd: &scsi_cmnd to send START_UNIT
1467 *
1468 * Return value:
1469 * 0 - Device is ready. 1 - Device NOT ready.
1470 */
1471static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
1472{
1473 static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
1474
1475 if (scmd->device->allow_restart) {
1476 int i;
1477 enum scsi_disposition rtn = NEEDS_RETRY;
1478
1479 for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
1480 rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
1481 scmd->device->eh_timeout, 0);
1482
1483 if (rtn == SUCCESS)
1484 return 0;
1485 }
1486
1487 return 1;
1488}
1489
1490 /**
1491 * scsi_eh_stu - send START_UNIT if needed
1492 * @shost: &scsi host being recovered.
1493 * @work_q: &list_head for pending commands.
1494 * @done_q: &list_head for processed commands.
1495 *
1496 * Notes:
1497 * If commands are failing due to not ready, initializing command required,
1498 * try revalidating the device, which will end up sending a start unit.
1499 */
1500static int scsi_eh_stu(struct Scsi_Host *shost,
1501 struct list_head *work_q,
1502 struct list_head *done_q)
1503{
1504 struct scsi_cmnd *scmd, *stu_scmd, *next;
1505 struct scsi_device *sdev;
1506
1507 shost_for_each_device(sdev, shost) {
1508 if (scsi_host_eh_past_deadline(shost)) {
1509 SCSI_LOG_ERROR_RECOVERY(3,
1510 sdev_printk(KERN_INFO, sdev,
1511 "%s: skip START_UNIT, past eh deadline\n",
1512 current->comm));
1513 scsi_device_put(sdev);
1514 break;
1515 }
1516 stu_scmd = NULL;
1517 list_for_each_entry(scmd, work_q, eh_entry)
1518 if (scmd->device == sdev && SCSI_SENSE_VALID(scmd) &&
1519 scsi_check_sense(scmd) == FAILED ) {
1520 stu_scmd = scmd;
1521 break;
1522 }
1523
1524 if (!stu_scmd)
1525 continue;
1526
1527 SCSI_LOG_ERROR_RECOVERY(3,
1528 sdev_printk(KERN_INFO, sdev,
1529 "%s: Sending START_UNIT\n",
1530 current->comm));
1531
1532 if (!scsi_eh_try_stu(stu_scmd)) {
1533 if (!scsi_device_online(sdev) ||
1534 !scsi_eh_tur(stu_scmd)) {
1535 list_for_each_entry_safe(scmd, next,
1536 work_q, eh_entry) {
1537 if (scmd->device == sdev &&
1538 scsi_eh_action(scmd, SUCCESS) == SUCCESS)
1539 scsi_eh_finish_cmd(scmd, done_q);
1540 }
1541 }
1542 } else {
1543 SCSI_LOG_ERROR_RECOVERY(3,
1544 sdev_printk(KERN_INFO, sdev,
1545 "%s: START_UNIT failed\n",
1546 current->comm));
1547 }
1548 }
1549
1550 return list_empty(work_q);
1551}
1552
1553
1554/**
1555 * scsi_eh_bus_device_reset - send bdr if needed
1556 * @shost: scsi host being recovered.
1557 * @work_q: &list_head for pending commands.
1558 * @done_q: &list_head for processed commands.
1559 *
1560 * Notes:
1561 * Try a bus device reset. Still, look to see whether we have multiple
1562 * devices that are jammed or not - if we have multiple devices, it
1563 * makes no sense to try bus_device_reset - we really would need to try
1564 * a bus_reset instead.
1565 */
1566static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
1567 struct list_head *work_q,
1568 struct list_head *done_q)
1569{
1570 struct scsi_cmnd *scmd, *bdr_scmd, *next;
1571 struct scsi_device *sdev;
1572 enum scsi_disposition rtn;
1573
1574 shost_for_each_device(sdev, shost) {
1575 if (scsi_host_eh_past_deadline(shost)) {
1576 SCSI_LOG_ERROR_RECOVERY(3,
1577 sdev_printk(KERN_INFO, sdev,
1578 "%s: skip BDR, past eh deadline\n",
1579 current->comm));
1580 scsi_device_put(sdev);
1581 break;
1582 }
1583 bdr_scmd = NULL;
1584 list_for_each_entry(scmd, work_q, eh_entry)
1585 if (scmd->device == sdev) {
1586 bdr_scmd = scmd;
1587 break;
1588 }
1589
1590 if (!bdr_scmd)
1591 continue;
1592
1593 SCSI_LOG_ERROR_RECOVERY(3,
1594 sdev_printk(KERN_INFO, sdev,
1595 "%s: Sending BDR\n", current->comm));
1596 rtn = scsi_try_bus_device_reset(bdr_scmd);
1597 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1598 if (!scsi_device_online(sdev) ||
1599 rtn == FAST_IO_FAIL ||
1600 !scsi_eh_tur(bdr_scmd)) {
1601 list_for_each_entry_safe(scmd, next,
1602 work_q, eh_entry) {
1603 if (scmd->device == sdev &&
1604 scsi_eh_action(scmd, rtn) != FAILED)
1605 scsi_eh_finish_cmd(scmd,
1606 done_q);
1607 }
1608 }
1609 } else {
1610 SCSI_LOG_ERROR_RECOVERY(3,
1611 sdev_printk(KERN_INFO, sdev,
1612 "%s: BDR failed\n", current->comm));
1613 }
1614 }
1615
1616 return list_empty(work_q);
1617}
1618
1619/**
1620 * scsi_eh_target_reset - send target reset if needed
1621 * @shost: scsi host being recovered.
1622 * @work_q: &list_head for pending commands.
1623 * @done_q: &list_head for processed commands.
1624 *
1625 * Notes:
1626 * Try a target reset.
1627 */
1628static int scsi_eh_target_reset(struct Scsi_Host *shost,
1629 struct list_head *work_q,
1630 struct list_head *done_q)
1631{
1632 LIST_HEAD(tmp_list);
1633 LIST_HEAD(check_list);
1634
1635 list_splice_init(work_q, &tmp_list);
1636
1637 while (!list_empty(&tmp_list)) {
1638 struct scsi_cmnd *next, *scmd;
1639 enum scsi_disposition rtn;
1640 unsigned int id;
1641
1642 if (scsi_host_eh_past_deadline(shost)) {
1643 /* push back on work queue for further processing */
1644 list_splice_init(&check_list, work_q);
1645 list_splice_init(&tmp_list, work_q);
1646 SCSI_LOG_ERROR_RECOVERY(3,
1647 shost_printk(KERN_INFO, shost,
1648 "%s: Skip target reset, past eh deadline\n",
1649 current->comm));
1650 return list_empty(work_q);
1651 }
1652
1653 scmd = list_entry(tmp_list.next, struct scsi_cmnd, eh_entry);
1654 id = scmd_id(scmd);
1655
1656 SCSI_LOG_ERROR_RECOVERY(3,
1657 shost_printk(KERN_INFO, shost,
1658 "%s: Sending target reset to target %d\n",
1659 current->comm, id));
1660 rtn = scsi_try_target_reset(scmd);
1661 if (rtn != SUCCESS && rtn != FAST_IO_FAIL)
1662 SCSI_LOG_ERROR_RECOVERY(3,
1663 shost_printk(KERN_INFO, shost,
1664 "%s: Target reset failed"
1665 " target: %d\n",
1666 current->comm, id));
1667 list_for_each_entry_safe(scmd, next, &tmp_list, eh_entry) {
1668 if (scmd_id(scmd) != id)
1669 continue;
1670
1671 if (rtn == SUCCESS)
1672 list_move_tail(&scmd->eh_entry, &check_list);
1673 else if (rtn == FAST_IO_FAIL)
1674 scsi_eh_finish_cmd(scmd, done_q);
1675 else
1676 /* push back on work queue for further processing */
1677 list_move(&scmd->eh_entry, work_q);
1678 }
1679 }
1680
1681 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1682}
1683
1684/**
1685 * scsi_eh_bus_reset - send a bus reset
1686 * @shost: &scsi host being recovered.
1687 * @work_q: &list_head for pending commands.
1688 * @done_q: &list_head for processed commands.
1689 */
1690static int scsi_eh_bus_reset(struct Scsi_Host *shost,
1691 struct list_head *work_q,
1692 struct list_head *done_q)
1693{
1694 struct scsi_cmnd *scmd, *chan_scmd, *next;
1695 LIST_HEAD(check_list);
1696 unsigned int channel;
1697 enum scsi_disposition rtn;
1698
1699 /*
1700 * we really want to loop over the various channels, and do this on
1701 * a channel by channel basis. we should also check to see if any
1702 * of the failed commands are on soft_reset devices, and if so, skip
1703 * the reset.
1704 */
1705
1706 for (channel = 0; channel <= shost->max_channel; channel++) {
1707 if (scsi_host_eh_past_deadline(shost)) {
1708 list_splice_init(&check_list, work_q);
1709 SCSI_LOG_ERROR_RECOVERY(3,
1710 shost_printk(KERN_INFO, shost,
1711 "%s: skip BRST, past eh deadline\n",
1712 current->comm));
1713 return list_empty(work_q);
1714 }
1715
1716 chan_scmd = NULL;
1717 list_for_each_entry(scmd, work_q, eh_entry) {
1718 if (channel == scmd_channel(scmd)) {
1719 chan_scmd = scmd;
1720 break;
1721 /*
1722 * FIXME add back in some support for
1723 * soft_reset devices.
1724 */
1725 }
1726 }
1727
1728 if (!chan_scmd)
1729 continue;
1730 SCSI_LOG_ERROR_RECOVERY(3,
1731 shost_printk(KERN_INFO, shost,
1732 "%s: Sending BRST chan: %d\n",
1733 current->comm, channel));
1734 rtn = scsi_try_bus_reset(chan_scmd);
1735 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1736 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1737 if (channel == scmd_channel(scmd)) {
1738 if (rtn == FAST_IO_FAIL)
1739 scsi_eh_finish_cmd(scmd,
1740 done_q);
1741 else
1742 list_move_tail(&scmd->eh_entry,
1743 &check_list);
1744 }
1745 }
1746 } else {
1747 SCSI_LOG_ERROR_RECOVERY(3,
1748 shost_printk(KERN_INFO, shost,
1749 "%s: BRST failed chan: %d\n",
1750 current->comm, channel));
1751 }
1752 }
1753 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1754}
1755
1756/**
1757 * scsi_eh_host_reset - send a host reset
1758 * @shost: host to be reset.
1759 * @work_q: &list_head for pending commands.
1760 * @done_q: &list_head for processed commands.
1761 */
1762static int scsi_eh_host_reset(struct Scsi_Host *shost,
1763 struct list_head *work_q,
1764 struct list_head *done_q)
1765{
1766 struct scsi_cmnd *scmd, *next;
1767 LIST_HEAD(check_list);
1768 enum scsi_disposition rtn;
1769
1770 if (!list_empty(work_q)) {
1771 scmd = list_entry(work_q->next,
1772 struct scsi_cmnd, eh_entry);
1773
1774 SCSI_LOG_ERROR_RECOVERY(3,
1775 shost_printk(KERN_INFO, shost,
1776 "%s: Sending HRST\n",
1777 current->comm));
1778
1779 rtn = scsi_try_host_reset(scmd);
1780 if (rtn == SUCCESS) {
1781 list_splice_init(work_q, &check_list);
1782 } else if (rtn == FAST_IO_FAIL) {
1783 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1784 scsi_eh_finish_cmd(scmd, done_q);
1785 }
1786 } else {
1787 SCSI_LOG_ERROR_RECOVERY(3,
1788 shost_printk(KERN_INFO, shost,
1789 "%s: HRST failed\n",
1790 current->comm));
1791 }
1792 }
1793 return scsi_eh_test_devices(&check_list, work_q, done_q, 1);
1794}
1795
1796/**
1797 * scsi_eh_offline_sdevs - offline scsi devices that fail to recover
1798 * @work_q: &list_head for pending commands.
1799 * @done_q: &list_head for processed commands.
1800 */
1801static void scsi_eh_offline_sdevs(struct list_head *work_q,
1802 struct list_head *done_q)
1803{
1804 struct scsi_cmnd *scmd, *next;
1805 struct scsi_device *sdev;
1806
1807 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1808 sdev_printk(KERN_INFO, scmd->device, "Device offlined - "
1809 "not ready after error recovery\n");
1810 sdev = scmd->device;
1811
1812 mutex_lock(&sdev->state_mutex);
1813 scsi_device_set_state(sdev, SDEV_OFFLINE);
1814 mutex_unlock(&sdev->state_mutex);
1815
1816 scsi_eh_finish_cmd(scmd, done_q);
1817 }
1818 return;
1819}
1820
1821/**
1822 * scsi_noretry_cmd - determine if command should be failed fast
1823 * @scmd: SCSI cmd to examine.
1824 */
1825bool scsi_noretry_cmd(struct scsi_cmnd *scmd)
1826{
1827 struct request *req = scsi_cmd_to_rq(scmd);
1828
1829 switch (host_byte(scmd->result)) {
1830 case DID_OK:
1831 break;
1832 case DID_TIME_OUT:
1833 goto check_type;
1834 case DID_BUS_BUSY:
1835 return !!(req->cmd_flags & REQ_FAILFAST_TRANSPORT);
1836 case DID_PARITY:
1837 return !!(req->cmd_flags & REQ_FAILFAST_DEV);
1838 case DID_ERROR:
1839 if (get_status_byte(scmd) == SAM_STAT_RESERVATION_CONFLICT)
1840 return false;
1841 fallthrough;
1842 case DID_SOFT_ERROR:
1843 return !!(req->cmd_flags & REQ_FAILFAST_DRIVER);
1844 }
1845
1846 /* Never retry commands aborted due to a duration limit timeout */
1847 if (scsi_ml_byte(scmd->result) == SCSIML_STAT_DL_TIMEOUT)
1848 return true;
1849
1850 if (!scsi_status_is_check_condition(scmd->result))
1851 return false;
1852
1853check_type:
1854 /*
1855 * assume caller has checked sense and determined
1856 * the check condition was retryable.
1857 */
1858 if (req->cmd_flags & REQ_FAILFAST_DEV || blk_rq_is_passthrough(req))
1859 return true;
1860
1861 return false;
1862}
1863
1864/**
1865 * scsi_decide_disposition - Disposition a cmd on return from LLD.
1866 * @scmd: SCSI cmd to examine.
1867 *
1868 * Notes:
1869 * This is *only* called when we are examining the status after sending
1870 * out the actual data command. any commands that are queued for error
1871 * recovery (e.g. test_unit_ready) do *not* come through here.
1872 *
1873 * When this routine returns failed, it means the error handler thread
1874 * is woken. In cases where the error code indicates an error that
1875 * doesn't require the error handler read (i.e. we don't need to
1876 * abort/reset), this function should return SUCCESS.
1877 */
1878enum scsi_disposition scsi_decide_disposition(struct scsi_cmnd *scmd)
1879{
1880 enum scsi_disposition rtn;
1881
1882 /*
1883 * if the device is offline, then we clearly just pass the result back
1884 * up to the top level.
1885 */
1886 if (!scsi_device_online(scmd->device)) {
1887 SCSI_LOG_ERROR_RECOVERY(5, scmd_printk(KERN_INFO, scmd,
1888 "%s: device offline - report as SUCCESS\n", __func__));
1889 return SUCCESS;
1890 }
1891
1892 /*
1893 * first check the host byte, to see if there is anything in there
1894 * that would indicate what we need to do.
1895 */
1896 switch (host_byte(scmd->result)) {
1897 case DID_PASSTHROUGH:
1898 /*
1899 * no matter what, pass this through to the upper layer.
1900 * nuke this special code so that it looks like we are saying
1901 * did_ok.
1902 */
1903 scmd->result &= 0xff00ffff;
1904 return SUCCESS;
1905 case DID_OK:
1906 /*
1907 * looks good. drop through, and check the next byte.
1908 */
1909 break;
1910 case DID_ABORT:
1911 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
1912 set_host_byte(scmd, DID_TIME_OUT);
1913 return SUCCESS;
1914 }
1915 fallthrough;
1916 case DID_NO_CONNECT:
1917 case DID_BAD_TARGET:
1918 /*
1919 * note - this means that we just report the status back
1920 * to the top level driver, not that we actually think
1921 * that it indicates SUCCESS.
1922 */
1923 return SUCCESS;
1924 case DID_SOFT_ERROR:
1925 /*
1926 * when the low level driver returns did_soft_error,
1927 * it is responsible for keeping an internal retry counter
1928 * in order to avoid endless loops (db)
1929 */
1930 goto maybe_retry;
1931 case DID_IMM_RETRY:
1932 return NEEDS_RETRY;
1933
1934 case DID_REQUEUE:
1935 return ADD_TO_MLQUEUE;
1936 case DID_TRANSPORT_DISRUPTED:
1937 /*
1938 * LLD/transport was disrupted during processing of the IO.
1939 * The transport class is now blocked/blocking,
1940 * and the transport will decide what to do with the IO
1941 * based on its timers and recovery capablilities if
1942 * there are enough retries.
1943 */
1944 goto maybe_retry;
1945 case DID_TRANSPORT_FAILFAST:
1946 /*
1947 * The transport decided to failfast the IO (most likely
1948 * the fast io fail tmo fired), so send IO directly upwards.
1949 */
1950 return SUCCESS;
1951 case DID_TRANSPORT_MARGINAL:
1952 /*
1953 * caller has decided not to do retries on
1954 * abort success, so send IO directly upwards
1955 */
1956 return SUCCESS;
1957 case DID_ERROR:
1958 if (get_status_byte(scmd) == SAM_STAT_RESERVATION_CONFLICT)
1959 /*
1960 * execute reservation conflict processing code
1961 * lower down
1962 */
1963 break;
1964 fallthrough;
1965 case DID_BUS_BUSY:
1966 case DID_PARITY:
1967 goto maybe_retry;
1968 case DID_TIME_OUT:
1969 /*
1970 * when we scan the bus, we get timeout messages for
1971 * these commands if there is no device available.
1972 * other hosts report did_no_connect for the same thing.
1973 */
1974 if ((scmd->cmnd[0] == TEST_UNIT_READY ||
1975 scmd->cmnd[0] == INQUIRY)) {
1976 return SUCCESS;
1977 } else {
1978 return FAILED;
1979 }
1980 case DID_RESET:
1981 return SUCCESS;
1982 default:
1983 return FAILED;
1984 }
1985
1986 /*
1987 * check the status byte to see if this indicates anything special.
1988 */
1989 switch (get_status_byte(scmd)) {
1990 case SAM_STAT_TASK_SET_FULL:
1991 scsi_handle_queue_full(scmd->device);
1992 /*
1993 * the case of trying to send too many commands to a
1994 * tagged queueing device.
1995 */
1996 fallthrough;
1997 case SAM_STAT_BUSY:
1998 /*
1999 * device can't talk to us at the moment. Should only
2000 * occur (SAM-3) when the task queue is empty, so will cause
2001 * the empty queue handling to trigger a stall in the
2002 * device.
2003 */
2004 return ADD_TO_MLQUEUE;
2005 case SAM_STAT_GOOD:
2006 if (scmd->cmnd[0] == REPORT_LUNS)
2007 scmd->device->sdev_target->expecting_lun_change = 0;
2008 scsi_handle_queue_ramp_up(scmd->device);
2009 if (scmd->sense_buffer && SCSI_SENSE_VALID(scmd))
2010 /*
2011 * If we have sense data, call scsi_check_sense() in
2012 * order to set the correct SCSI ML byte (if any).
2013 * No point in checking the return value, since the
2014 * command has already completed successfully.
2015 */
2016 scsi_check_sense(scmd);
2017 fallthrough;
2018 case SAM_STAT_COMMAND_TERMINATED:
2019 return SUCCESS;
2020 case SAM_STAT_TASK_ABORTED:
2021 goto maybe_retry;
2022 case SAM_STAT_CHECK_CONDITION:
2023 rtn = scsi_check_sense(scmd);
2024 if (rtn == NEEDS_RETRY)
2025 goto maybe_retry;
2026 /* if rtn == FAILED, we have no sense information;
2027 * returning FAILED will wake the error handler thread
2028 * to collect the sense and redo the decide
2029 * disposition */
2030 return rtn;
2031 case SAM_STAT_CONDITION_MET:
2032 case SAM_STAT_INTERMEDIATE:
2033 case SAM_STAT_INTERMEDIATE_CONDITION_MET:
2034 case SAM_STAT_ACA_ACTIVE:
2035 /*
2036 * who knows? FIXME(eric)
2037 */
2038 return SUCCESS;
2039
2040 case SAM_STAT_RESERVATION_CONFLICT:
2041 sdev_printk(KERN_INFO, scmd->device,
2042 "reservation conflict\n");
2043 set_scsi_ml_byte(scmd, SCSIML_STAT_RESV_CONFLICT);
2044 return SUCCESS; /* causes immediate i/o error */
2045 }
2046 return FAILED;
2047
2048maybe_retry:
2049
2050 /* we requeue for retry because the error was retryable, and
2051 * the request was not marked fast fail. Note that above,
2052 * even if the request is marked fast fail, we still requeue
2053 * for queue congestion conditions (QUEUE_FULL or BUSY) */
2054 if (scsi_cmd_retry_allowed(scmd) && !scsi_noretry_cmd(scmd)) {
2055 return NEEDS_RETRY;
2056 } else {
2057 /*
2058 * no more retries - report this one back to upper level.
2059 */
2060 return SUCCESS;
2061 }
2062}
2063
2064static enum rq_end_io_ret eh_lock_door_done(struct request *req,
2065 blk_status_t status)
2066{
2067 blk_mq_free_request(req);
2068 return RQ_END_IO_NONE;
2069}
2070
2071/**
2072 * scsi_eh_lock_door - Prevent medium removal for the specified device
2073 * @sdev: SCSI device to prevent medium removal
2074 *
2075 * Locking:
2076 * We must be called from process context.
2077 *
2078 * Notes:
2079 * We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
2080 * head of the devices request queue, and continue.
2081 */
2082static void scsi_eh_lock_door(struct scsi_device *sdev)
2083{
2084 struct scsi_cmnd *scmd;
2085 struct request *req;
2086
2087 req = scsi_alloc_request(sdev->request_queue, REQ_OP_DRV_IN, 0);
2088 if (IS_ERR(req))
2089 return;
2090 scmd = blk_mq_rq_to_pdu(req);
2091
2092 scmd->cmnd[0] = ALLOW_MEDIUM_REMOVAL;
2093 scmd->cmnd[1] = 0;
2094 scmd->cmnd[2] = 0;
2095 scmd->cmnd[3] = 0;
2096 scmd->cmnd[4] = SCSI_REMOVAL_PREVENT;
2097 scmd->cmnd[5] = 0;
2098 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
2099 scmd->allowed = 5;
2100
2101 req->rq_flags |= RQF_QUIET;
2102 req->timeout = 10 * HZ;
2103 req->end_io = eh_lock_door_done;
2104
2105 blk_execute_rq_nowait(req, true);
2106}
2107
2108/**
2109 * scsi_restart_operations - restart io operations to the specified host.
2110 * @shost: Host we are restarting.
2111 *
2112 * Notes:
2113 * When we entered the error handler, we blocked all further i/o to
2114 * this device. we need to 'reverse' this process.
2115 */
2116static void scsi_restart_operations(struct Scsi_Host *shost)
2117{
2118 struct scsi_device *sdev;
2119 unsigned long flags;
2120
2121 /*
2122 * If the door was locked, we need to insert a door lock request
2123 * onto the head of the SCSI request queue for the device. There
2124 * is no point trying to lock the door of an off-line device.
2125 */
2126 shost_for_each_device(sdev, shost) {
2127 if (scsi_device_online(sdev) && sdev->was_reset && sdev->locked) {
2128 scsi_eh_lock_door(sdev);
2129 sdev->was_reset = 0;
2130 }
2131 }
2132
2133 /*
2134 * next free up anything directly waiting upon the host. this
2135 * will be requests for character device operations, and also for
2136 * ioctls to queued block devices.
2137 */
2138 SCSI_LOG_ERROR_RECOVERY(3,
2139 shost_printk(KERN_INFO, shost, "waking up host to restart\n"));
2140
2141 spin_lock_irqsave(shost->host_lock, flags);
2142 if (scsi_host_set_state(shost, SHOST_RUNNING))
2143 if (scsi_host_set_state(shost, SHOST_CANCEL))
2144 BUG_ON(scsi_host_set_state(shost, SHOST_DEL));
2145 spin_unlock_irqrestore(shost->host_lock, flags);
2146
2147 wake_up(&shost->host_wait);
2148
2149 /*
2150 * finally we need to re-initiate requests that may be pending. we will
2151 * have had everything blocked while error handling is taking place, and
2152 * now that error recovery is done, we will need to ensure that these
2153 * requests are started.
2154 */
2155 scsi_run_host_queues(shost);
2156
2157 /*
2158 * if eh is active and host_eh_scheduled is pending we need to re-run
2159 * recovery. we do this check after scsi_run_host_queues() to allow
2160 * everything pent up since the last eh run a chance to make forward
2161 * progress before we sync again. Either we'll immediately re-run
2162 * recovery or scsi_device_unbusy() will wake us again when these
2163 * pending commands complete.
2164 */
2165 spin_lock_irqsave(shost->host_lock, flags);
2166 if (shost->host_eh_scheduled)
2167 if (scsi_host_set_state(shost, SHOST_RECOVERY))
2168 WARN_ON(scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY));
2169 spin_unlock_irqrestore(shost->host_lock, flags);
2170}
2171
2172/**
2173 * scsi_eh_ready_devs - check device ready state and recover if not.
2174 * @shost: host to be recovered.
2175 * @work_q: &list_head for pending commands.
2176 * @done_q: &list_head for processed commands.
2177 */
2178void scsi_eh_ready_devs(struct Scsi_Host *shost,
2179 struct list_head *work_q,
2180 struct list_head *done_q)
2181{
2182 if (!scsi_eh_stu(shost, work_q, done_q))
2183 if (!scsi_eh_bus_device_reset(shost, work_q, done_q))
2184 if (!scsi_eh_target_reset(shost, work_q, done_q))
2185 if (!scsi_eh_bus_reset(shost, work_q, done_q))
2186 if (!scsi_eh_host_reset(shost, work_q, done_q))
2187 scsi_eh_offline_sdevs(work_q,
2188 done_q);
2189}
2190EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
2191
2192/**
2193 * scsi_eh_flush_done_q - finish processed commands or retry them.
2194 * @done_q: list_head of processed commands.
2195 */
2196void scsi_eh_flush_done_q(struct list_head *done_q)
2197{
2198 struct scsi_cmnd *scmd, *next;
2199
2200 list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
2201 struct scsi_device *sdev = scmd->device;
2202
2203 list_del_init(&scmd->eh_entry);
2204 if (scsi_device_online(sdev) && !scsi_noretry_cmd(scmd) &&
2205 scsi_cmd_retry_allowed(scmd) &&
2206 scsi_eh_should_retry_cmd(scmd)) {
2207 SCSI_LOG_ERROR_RECOVERY(3,
2208 scmd_printk(KERN_INFO, scmd,
2209 "%s: flush retry cmd\n",
2210 current->comm));
2211 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
2212 blk_mq_kick_requeue_list(sdev->request_queue);
2213 } else {
2214 /*
2215 * If just we got sense for the device (called
2216 * scsi_eh_get_sense), scmd->result is already
2217 * set, do not set DID_TIME_OUT.
2218 */
2219 if (!scmd->result &&
2220 !(scmd->flags & SCMD_FORCE_EH_SUCCESS))
2221 scmd->result |= (DID_TIME_OUT << 16);
2222 SCSI_LOG_ERROR_RECOVERY(3,
2223 scmd_printk(KERN_INFO, scmd,
2224 "%s: flush finish cmd\n",
2225 current->comm));
2226 scsi_finish_command(scmd);
2227 }
2228 }
2229}
2230EXPORT_SYMBOL(scsi_eh_flush_done_q);
2231
2232/**
2233 * scsi_unjam_host - Attempt to fix a host which has a cmd that failed.
2234 * @shost: Host to unjam.
2235 *
2236 * Notes:
2237 * When we come in here, we *know* that all commands on the bus have
2238 * either completed, failed or timed out. we also know that no further
2239 * commands are being sent to the host, so things are relatively quiet
2240 * and we have freedom to fiddle with things as we wish.
2241 *
2242 * This is only the *default* implementation. it is possible for
2243 * individual drivers to supply their own version of this function, and
2244 * if the maintainer wishes to do this, it is strongly suggested that
2245 * this function be taken as a template and modified. this function
2246 * was designed to correctly handle problems for about 95% of the
2247 * different cases out there, and it should always provide at least a
2248 * reasonable amount of error recovery.
2249 *
2250 * Any command marked 'failed' or 'timeout' must eventually have
2251 * scsi_finish_cmd() called for it. we do all of the retry stuff
2252 * here, so when we restart the host after we return it should have an
2253 * empty queue.
2254 */
2255static void scsi_unjam_host(struct Scsi_Host *shost)
2256{
2257 unsigned long flags;
2258 LIST_HEAD(eh_work_q);
2259 LIST_HEAD(eh_done_q);
2260
2261 spin_lock_irqsave(shost->host_lock, flags);
2262 list_splice_init(&shost->eh_cmd_q, &eh_work_q);
2263 spin_unlock_irqrestore(shost->host_lock, flags);
2264
2265 SCSI_LOG_ERROR_RECOVERY(1, scsi_eh_prt_fail_stats(shost, &eh_work_q));
2266
2267 if (!scsi_eh_get_sense(&eh_work_q, &eh_done_q))
2268 scsi_eh_ready_devs(shost, &eh_work_q, &eh_done_q);
2269
2270 spin_lock_irqsave(shost->host_lock, flags);
2271 if (shost->eh_deadline != -1)
2272 shost->last_reset = 0;
2273 spin_unlock_irqrestore(shost->host_lock, flags);
2274 scsi_eh_flush_done_q(&eh_done_q);
2275}
2276
2277/**
2278 * scsi_error_handler - SCSI error handler thread
2279 * @data: Host for which we are running.
2280 *
2281 * Notes:
2282 * This is the main error handling loop. This is run as a kernel thread
2283 * for every SCSI host and handles all error handling activity.
2284 */
2285int scsi_error_handler(void *data)
2286{
2287 struct Scsi_Host *shost = data;
2288
2289 /*
2290 * We use TASK_INTERRUPTIBLE so that the thread is not
2291 * counted against the load average as a running process.
2292 * We never actually get interrupted because kthread_run
2293 * disables signal delivery for the created thread.
2294 */
2295 while (true) {
2296 /*
2297 * The sequence in kthread_stop() sets the stop flag first
2298 * then wakes the process. To avoid missed wakeups, the task
2299 * should always be in a non running state before the stop
2300 * flag is checked
2301 */
2302 set_current_state(TASK_INTERRUPTIBLE);
2303 if (kthread_should_stop())
2304 break;
2305
2306 if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) ||
2307 shost->host_failed != scsi_host_busy(shost)) {
2308 SCSI_LOG_ERROR_RECOVERY(1,
2309 shost_printk(KERN_INFO, shost,
2310 "scsi_eh_%d: sleeping\n",
2311 shost->host_no));
2312 schedule();
2313 continue;
2314 }
2315
2316 __set_current_state(TASK_RUNNING);
2317 SCSI_LOG_ERROR_RECOVERY(1,
2318 shost_printk(KERN_INFO, shost,
2319 "scsi_eh_%d: waking up %d/%d/%d\n",
2320 shost->host_no, shost->host_eh_scheduled,
2321 shost->host_failed,
2322 scsi_host_busy(shost)));
2323
2324 /*
2325 * We have a host that is failing for some reason. Figure out
2326 * what we need to do to get it up and online again (if we can).
2327 * If we fail, we end up taking the thing offline.
2328 */
2329 if (!shost->eh_noresume && scsi_autopm_get_host(shost) != 0) {
2330 SCSI_LOG_ERROR_RECOVERY(1,
2331 shost_printk(KERN_ERR, shost,
2332 "scsi_eh_%d: unable to autoresume\n",
2333 shost->host_no));
2334 continue;
2335 }
2336
2337 if (shost->transportt->eh_strategy_handler)
2338 shost->transportt->eh_strategy_handler(shost);
2339 else
2340 scsi_unjam_host(shost);
2341
2342 /* All scmds have been handled */
2343 shost->host_failed = 0;
2344
2345 /*
2346 * Note - if the above fails completely, the action is to take
2347 * individual devices offline and flush the queue of any
2348 * outstanding requests that may have been pending. When we
2349 * restart, we restart any I/O to any other devices on the bus
2350 * which are still online.
2351 */
2352 scsi_restart_operations(shost);
2353 if (!shost->eh_noresume)
2354 scsi_autopm_put_host(shost);
2355 }
2356 __set_current_state(TASK_RUNNING);
2357
2358 SCSI_LOG_ERROR_RECOVERY(1,
2359 shost_printk(KERN_INFO, shost,
2360 "Error handler scsi_eh_%d exiting\n",
2361 shost->host_no));
2362 shost->ehandler = NULL;
2363 return 0;
2364}
2365
2366/*
2367 * Function: scsi_report_bus_reset()
2368 *
2369 * Purpose: Utility function used by low-level drivers to report that
2370 * they have observed a bus reset on the bus being handled.
2371 *
2372 * Arguments: shost - Host in question
2373 * channel - channel on which reset was observed.
2374 *
2375 * Returns: Nothing
2376 *
2377 * Lock status: Host lock must be held.
2378 *
2379 * Notes: This only needs to be called if the reset is one which
2380 * originates from an unknown location. Resets originated
2381 * by the mid-level itself don't need to call this, but there
2382 * should be no harm.
2383 *
2384 * The main purpose of this is to make sure that a CHECK_CONDITION
2385 * is properly treated.
2386 */
2387void scsi_report_bus_reset(struct Scsi_Host *shost, int channel)
2388{
2389 struct scsi_device *sdev;
2390
2391 __shost_for_each_device(sdev, shost) {
2392 if (channel == sdev_channel(sdev))
2393 __scsi_report_device_reset(sdev, NULL);
2394 }
2395}
2396EXPORT_SYMBOL(scsi_report_bus_reset);
2397
2398/*
2399 * Function: scsi_report_device_reset()
2400 *
2401 * Purpose: Utility function used by low-level drivers to report that
2402 * they have observed a device reset on the device being handled.
2403 *
2404 * Arguments: shost - Host in question
2405 * channel - channel on which reset was observed
2406 * target - target on which reset was observed
2407 *
2408 * Returns: Nothing
2409 *
2410 * Lock status: Host lock must be held
2411 *
2412 * Notes: This only needs to be called if the reset is one which
2413 * originates from an unknown location. Resets originated
2414 * by the mid-level itself don't need to call this, but there
2415 * should be no harm.
2416 *
2417 * The main purpose of this is to make sure that a CHECK_CONDITION
2418 * is properly treated.
2419 */
2420void scsi_report_device_reset(struct Scsi_Host *shost, int channel, int target)
2421{
2422 struct scsi_device *sdev;
2423
2424 __shost_for_each_device(sdev, shost) {
2425 if (channel == sdev_channel(sdev) &&
2426 target == sdev_id(sdev))
2427 __scsi_report_device_reset(sdev, NULL);
2428 }
2429}
2430EXPORT_SYMBOL(scsi_report_device_reset);
2431
2432/**
2433 * scsi_ioctl_reset: explicitly reset a host/bus/target/device
2434 * @dev: scsi_device to operate on
2435 * @arg: reset type (see sg.h)
2436 */
2437int
2438scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
2439{
2440 struct scsi_cmnd *scmd;
2441 struct Scsi_Host *shost = dev->host;
2442 struct request *rq;
2443 unsigned long flags;
2444 int error = 0, val;
2445 enum scsi_disposition rtn;
2446
2447 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
2448 return -EACCES;
2449
2450 error = get_user(val, arg);
2451 if (error)
2452 return error;
2453
2454 if (scsi_autopm_get_host(shost) < 0)
2455 return -EIO;
2456
2457 error = -EIO;
2458 rq = kzalloc(sizeof(struct request) + sizeof(struct scsi_cmnd) +
2459 shost->hostt->cmd_size, GFP_KERNEL);
2460 if (!rq)
2461 goto out_put_autopm_host;
2462 blk_rq_init(NULL, rq);
2463
2464 scmd = (struct scsi_cmnd *)(rq + 1);
2465 scsi_init_command(dev, scmd);
2466
2467 scmd->submitter = SUBMITTED_BY_SCSI_RESET_IOCTL;
2468 scmd->flags |= SCMD_LAST;
2469 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
2470
2471 scmd->cmd_len = 0;
2472
2473 scmd->sc_data_direction = DMA_BIDIRECTIONAL;
2474
2475 spin_lock_irqsave(shost->host_lock, flags);
2476 shost->tmf_in_progress = 1;
2477 spin_unlock_irqrestore(shost->host_lock, flags);
2478
2479 switch (val & ~SG_SCSI_RESET_NO_ESCALATE) {
2480 case SG_SCSI_RESET_NOTHING:
2481 rtn = SUCCESS;
2482 break;
2483 case SG_SCSI_RESET_DEVICE:
2484 rtn = scsi_try_bus_device_reset(scmd);
2485 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2486 break;
2487 fallthrough;
2488 case SG_SCSI_RESET_TARGET:
2489 rtn = scsi_try_target_reset(scmd);
2490 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2491 break;
2492 fallthrough;
2493 case SG_SCSI_RESET_BUS:
2494 rtn = scsi_try_bus_reset(scmd);
2495 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2496 break;
2497 fallthrough;
2498 case SG_SCSI_RESET_HOST:
2499 rtn = scsi_try_host_reset(scmd);
2500 if (rtn == SUCCESS)
2501 break;
2502 fallthrough;
2503 default:
2504 rtn = FAILED;
2505 break;
2506 }
2507
2508 error = (rtn == SUCCESS) ? 0 : -EIO;
2509
2510 spin_lock_irqsave(shost->host_lock, flags);
2511 shost->tmf_in_progress = 0;
2512 spin_unlock_irqrestore(shost->host_lock, flags);
2513
2514 /*
2515 * be sure to wake up anyone who was sleeping or had their queue
2516 * suspended while we performed the TMF.
2517 */
2518 SCSI_LOG_ERROR_RECOVERY(3,
2519 shost_printk(KERN_INFO, shost,
2520 "waking up host to restart after TMF\n"));
2521
2522 wake_up(&shost->host_wait);
2523 scsi_run_host_queues(shost);
2524
2525 kfree(rq);
2526
2527out_put_autopm_host:
2528 scsi_autopm_put_host(shost);
2529 return error;
2530}
2531
2532bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
2533 struct scsi_sense_hdr *sshdr)
2534{
2535 return scsi_normalize_sense(cmd->sense_buffer,
2536 SCSI_SENSE_BUFFERSIZE, sshdr);
2537}
2538EXPORT_SYMBOL(scsi_command_normalize_sense);
2539
2540/**
2541 * scsi_get_sense_info_fld - get information field from sense data (either fixed or descriptor format)
2542 * @sense_buffer: byte array of sense data
2543 * @sb_len: number of valid bytes in sense_buffer
2544 * @info_out: pointer to 64 integer where 8 or 4 byte information
2545 * field will be placed if found.
2546 *
2547 * Return value:
2548 * true if information field found, false if not found.
2549 */
2550bool scsi_get_sense_info_fld(const u8 *sense_buffer, int sb_len,
2551 u64 *info_out)
2552{
2553 const u8 * ucp;
2554
2555 if (sb_len < 7)
2556 return false;
2557 switch (sense_buffer[0] & 0x7f) {
2558 case 0x70:
2559 case 0x71:
2560 if (sense_buffer[0] & 0x80) {
2561 *info_out = get_unaligned_be32(&sense_buffer[3]);
2562 return true;
2563 }
2564 return false;
2565 case 0x72:
2566 case 0x73:
2567 ucp = scsi_sense_desc_find(sense_buffer, sb_len,
2568 0 /* info desc */);
2569 if (ucp && (0xa == ucp[1])) {
2570 *info_out = get_unaligned_be64(&ucp[4]);
2571 return true;
2572 }
2573 return false;
2574 default:
2575 return false;
2576 }
2577}
2578EXPORT_SYMBOL(scsi_get_sense_info_fld);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * scsi_error.c Copyright (C) 1997 Eric Youngdale
4 *
5 * SCSI error/timeout handling
6 * Initial versions: Eric Youngdale. Based upon conversations with
7 * Leonard Zubkoff and David Miller at Linux Expo,
8 * ideas originating from all over the place.
9 *
10 * Restructured scsi_unjam_host and associated functions.
11 * September 04, 2002 Mike Anderson (andmike@us.ibm.com)
12 *
13 * Forward port of Russell King's (rmk@arm.linux.org.uk) changes and
14 * minor cleanups.
15 * September 30, 2002 Mike Anderson (andmike@us.ibm.com)
16 */
17
18#include <linux/module.h>
19#include <linux/sched.h>
20#include <linux/gfp.h>
21#include <linux/timer.h>
22#include <linux/string.h>
23#include <linux/kernel.h>
24#include <linux/freezer.h>
25#include <linux/kthread.h>
26#include <linux/interrupt.h>
27#include <linux/blkdev.h>
28#include <linux/delay.h>
29#include <linux/jiffies.h>
30
31#include <scsi/scsi.h>
32#include <scsi/scsi_cmnd.h>
33#include <scsi/scsi_dbg.h>
34#include <scsi/scsi_device.h>
35#include <scsi/scsi_driver.h>
36#include <scsi/scsi_eh.h>
37#include <scsi/scsi_common.h>
38#include <scsi/scsi_transport.h>
39#include <scsi/scsi_host.h>
40#include <scsi/scsi_ioctl.h>
41#include <scsi/scsi_dh.h>
42#include <scsi/scsi_devinfo.h>
43#include <scsi/sg.h>
44
45#include "scsi_priv.h"
46#include "scsi_logging.h"
47#include "scsi_transport_api.h"
48
49#include <trace/events/scsi.h>
50
51#include <asm/unaligned.h>
52
53static void scsi_eh_done(struct scsi_cmnd *scmd);
54
55/*
56 * These should *probably* be handled by the host itself.
57 * Since it is allowed to sleep, it probably should.
58 */
59#define BUS_RESET_SETTLE_TIME (10)
60#define HOST_RESET_SETTLE_TIME (10)
61
62static int scsi_eh_try_stu(struct scsi_cmnd *scmd);
63static int scsi_try_to_abort_cmd(struct scsi_host_template *,
64 struct scsi_cmnd *);
65
66void scsi_eh_wakeup(struct Scsi_Host *shost)
67{
68 lockdep_assert_held(shost->host_lock);
69
70 if (scsi_host_busy(shost) == shost->host_failed) {
71 trace_scsi_eh_wakeup(shost);
72 wake_up_process(shost->ehandler);
73 SCSI_LOG_ERROR_RECOVERY(5, shost_printk(KERN_INFO, shost,
74 "Waking error handler thread\n"));
75 }
76}
77
78/**
79 * scsi_schedule_eh - schedule EH for SCSI host
80 * @shost: SCSI host to invoke error handling on.
81 *
82 * Schedule SCSI EH without scmd.
83 */
84void scsi_schedule_eh(struct Scsi_Host *shost)
85{
86 unsigned long flags;
87
88 spin_lock_irqsave(shost->host_lock, flags);
89
90 if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 ||
91 scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) {
92 shost->host_eh_scheduled++;
93 scsi_eh_wakeup(shost);
94 }
95
96 spin_unlock_irqrestore(shost->host_lock, flags);
97}
98EXPORT_SYMBOL_GPL(scsi_schedule_eh);
99
100static int scsi_host_eh_past_deadline(struct Scsi_Host *shost)
101{
102 if (!shost->last_reset || shost->eh_deadline == -1)
103 return 0;
104
105 /*
106 * 32bit accesses are guaranteed to be atomic
107 * (on all supported architectures), so instead
108 * of using a spinlock we can as well double check
109 * if eh_deadline has been set to 'off' during the
110 * time_before call.
111 */
112 if (time_before(jiffies, shost->last_reset + shost->eh_deadline) &&
113 shost->eh_deadline > -1)
114 return 0;
115
116 return 1;
117}
118
119/**
120 * scmd_eh_abort_handler - Handle command aborts
121 * @work: command to be aborted.
122 *
123 * Note: this function must be called only for a command that has timed out.
124 * Because the block layer marks a request as complete before it calls
125 * scsi_times_out(), a .scsi_done() call from the LLD for a command that has
126 * timed out do not have any effect. Hence it is safe to call
127 * scsi_finish_command() from this function.
128 */
129void
130scmd_eh_abort_handler(struct work_struct *work)
131{
132 struct scsi_cmnd *scmd =
133 container_of(work, struct scsi_cmnd, abort_work.work);
134 struct scsi_device *sdev = scmd->device;
135 int rtn;
136
137 if (scsi_host_eh_past_deadline(sdev->host)) {
138 SCSI_LOG_ERROR_RECOVERY(3,
139 scmd_printk(KERN_INFO, scmd,
140 "eh timeout, not aborting\n"));
141 } else {
142 SCSI_LOG_ERROR_RECOVERY(3,
143 scmd_printk(KERN_INFO, scmd,
144 "aborting command\n"));
145 rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd);
146 if (rtn == SUCCESS) {
147 set_host_byte(scmd, DID_TIME_OUT);
148 if (scsi_host_eh_past_deadline(sdev->host)) {
149 SCSI_LOG_ERROR_RECOVERY(3,
150 scmd_printk(KERN_INFO, scmd,
151 "eh timeout, not retrying "
152 "aborted command\n"));
153 } else if (!scsi_noretry_cmd(scmd) &&
154 (++scmd->retries <= scmd->allowed)) {
155 SCSI_LOG_ERROR_RECOVERY(3,
156 scmd_printk(KERN_WARNING, scmd,
157 "retry aborted command\n"));
158 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
159 return;
160 } else {
161 SCSI_LOG_ERROR_RECOVERY(3,
162 scmd_printk(KERN_WARNING, scmd,
163 "finish aborted command\n"));
164 scsi_finish_command(scmd);
165 return;
166 }
167 } else {
168 SCSI_LOG_ERROR_RECOVERY(3,
169 scmd_printk(KERN_INFO, scmd,
170 "cmd abort %s\n",
171 (rtn == FAST_IO_FAIL) ?
172 "not send" : "failed"));
173 }
174 }
175
176 scsi_eh_scmd_add(scmd);
177}
178
179/**
180 * scsi_abort_command - schedule a command abort
181 * @scmd: scmd to abort.
182 *
183 * We only need to abort commands after a command timeout
184 */
185static int
186scsi_abort_command(struct scsi_cmnd *scmd)
187{
188 struct scsi_device *sdev = scmd->device;
189 struct Scsi_Host *shost = sdev->host;
190 unsigned long flags;
191
192 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
193 /*
194 * Retry after abort failed, escalate to next level.
195 */
196 SCSI_LOG_ERROR_RECOVERY(3,
197 scmd_printk(KERN_INFO, scmd,
198 "previous abort failed\n"));
199 BUG_ON(delayed_work_pending(&scmd->abort_work));
200 return FAILED;
201 }
202
203 spin_lock_irqsave(shost->host_lock, flags);
204 if (shost->eh_deadline != -1 && !shost->last_reset)
205 shost->last_reset = jiffies;
206 spin_unlock_irqrestore(shost->host_lock, flags);
207
208 scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED;
209 SCSI_LOG_ERROR_RECOVERY(3,
210 scmd_printk(KERN_INFO, scmd, "abort scheduled\n"));
211 queue_delayed_work(shost->tmf_work_q, &scmd->abort_work, HZ / 100);
212 return SUCCESS;
213}
214
215/**
216 * scsi_eh_reset - call into ->eh_action to reset internal counters
217 * @scmd: scmd to run eh on.
218 *
219 * The scsi driver might be carrying internal state about the
220 * devices, so we need to call into the driver to reset the
221 * internal state once the error handler is started.
222 */
223static void scsi_eh_reset(struct scsi_cmnd *scmd)
224{
225 if (!blk_rq_is_passthrough(scmd->request)) {
226 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
227 if (sdrv->eh_reset)
228 sdrv->eh_reset(scmd);
229 }
230}
231
232static void scsi_eh_inc_host_failed(struct rcu_head *head)
233{
234 struct scsi_cmnd *scmd = container_of(head, typeof(*scmd), rcu);
235 struct Scsi_Host *shost = scmd->device->host;
236 unsigned long flags;
237
238 spin_lock_irqsave(shost->host_lock, flags);
239 shost->host_failed++;
240 scsi_eh_wakeup(shost);
241 spin_unlock_irqrestore(shost->host_lock, flags);
242}
243
244/**
245 * scsi_eh_scmd_add - add scsi cmd to error handling.
246 * @scmd: scmd to run eh on.
247 */
248void scsi_eh_scmd_add(struct scsi_cmnd *scmd)
249{
250 struct Scsi_Host *shost = scmd->device->host;
251 unsigned long flags;
252 int ret;
253
254 WARN_ON_ONCE(!shost->ehandler);
255
256 spin_lock_irqsave(shost->host_lock, flags);
257 if (scsi_host_set_state(shost, SHOST_RECOVERY)) {
258 ret = scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY);
259 WARN_ON_ONCE(ret);
260 }
261 if (shost->eh_deadline != -1 && !shost->last_reset)
262 shost->last_reset = jiffies;
263
264 scsi_eh_reset(scmd);
265 list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
266 spin_unlock_irqrestore(shost->host_lock, flags);
267 /*
268 * Ensure that all tasks observe the host state change before the
269 * host_failed change.
270 */
271 call_rcu(&scmd->rcu, scsi_eh_inc_host_failed);
272}
273
274/**
275 * scsi_times_out - Timeout function for normal scsi commands.
276 * @req: request that is timing out.
277 *
278 * Notes:
279 * We do not need to lock this. There is the potential for a race
280 * only in that the normal completion handling might run, but if the
281 * normal completion function determines that the timer has already
282 * fired, then it mustn't do anything.
283 */
284enum blk_eh_timer_return scsi_times_out(struct request *req)
285{
286 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
287 enum blk_eh_timer_return rtn = BLK_EH_DONE;
288 struct Scsi_Host *host = scmd->device->host;
289
290 trace_scsi_dispatch_cmd_timeout(scmd);
291 scsi_log_completion(scmd, TIMEOUT_ERROR);
292
293 if (host->eh_deadline != -1 && !host->last_reset)
294 host->last_reset = jiffies;
295
296 if (host->hostt->eh_timed_out)
297 rtn = host->hostt->eh_timed_out(scmd);
298
299 if (rtn == BLK_EH_DONE) {
300 /*
301 * Set the command to complete first in order to prevent a real
302 * completion from releasing the command while error handling
303 * is using it. If the command was already completed, then the
304 * lower level driver beat the timeout handler, and it is safe
305 * to return without escalating error recovery.
306 *
307 * If timeout handling lost the race to a real completion, the
308 * block layer may ignore that due to a fake timeout injection,
309 * so return RESET_TIMER to allow error handling another shot
310 * at this command.
311 */
312 if (test_and_set_bit(SCMD_STATE_COMPLETE, &scmd->state))
313 return BLK_EH_RESET_TIMER;
314 if (scsi_abort_command(scmd) != SUCCESS) {
315 set_host_byte(scmd, DID_TIME_OUT);
316 scsi_eh_scmd_add(scmd);
317 }
318 }
319
320 return rtn;
321}
322
323/**
324 * scsi_block_when_processing_errors - Prevent cmds from being queued.
325 * @sdev: Device on which we are performing recovery.
326 *
327 * Description:
328 * We block until the host is out of error recovery, and then check to
329 * see whether the host or the device is offline.
330 *
331 * Return value:
332 * 0 when dev was taken offline by error recovery. 1 OK to proceed.
333 */
334int scsi_block_when_processing_errors(struct scsi_device *sdev)
335{
336 int online;
337
338 wait_event(sdev->host->host_wait, !scsi_host_in_recovery(sdev->host));
339
340 online = scsi_device_online(sdev);
341
342 return online;
343}
344EXPORT_SYMBOL(scsi_block_when_processing_errors);
345
346#ifdef CONFIG_SCSI_LOGGING
347/**
348 * scsi_eh_prt_fail_stats - Log info on failures.
349 * @shost: scsi host being recovered.
350 * @work_q: Queue of scsi cmds to process.
351 */
352static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
353 struct list_head *work_q)
354{
355 struct scsi_cmnd *scmd;
356 struct scsi_device *sdev;
357 int total_failures = 0;
358 int cmd_failed = 0;
359 int cmd_cancel = 0;
360 int devices_failed = 0;
361
362 shost_for_each_device(sdev, shost) {
363 list_for_each_entry(scmd, work_q, eh_entry) {
364 if (scmd->device == sdev) {
365 ++total_failures;
366 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED)
367 ++cmd_cancel;
368 else
369 ++cmd_failed;
370 }
371 }
372
373 if (cmd_cancel || cmd_failed) {
374 SCSI_LOG_ERROR_RECOVERY(3,
375 shost_printk(KERN_INFO, shost,
376 "%s: cmds failed: %d, cancel: %d\n",
377 __func__, cmd_failed,
378 cmd_cancel));
379 cmd_cancel = 0;
380 cmd_failed = 0;
381 ++devices_failed;
382 }
383 }
384
385 SCSI_LOG_ERROR_RECOVERY(2, shost_printk(KERN_INFO, shost,
386 "Total of %d commands on %d"
387 " devices require eh work\n",
388 total_failures, devices_failed));
389}
390#endif
391
392 /**
393 * scsi_report_lun_change - Set flag on all *other* devices on the same target
394 * to indicate that a UNIT ATTENTION is expected.
395 * @sdev: Device reporting the UNIT ATTENTION
396 */
397static void scsi_report_lun_change(struct scsi_device *sdev)
398{
399 sdev->sdev_target->expecting_lun_change = 1;
400}
401
402/**
403 * scsi_report_sense - Examine scsi sense information and log messages for
404 * certain conditions, also issue uevents for some of them.
405 * @sdev: Device reporting the sense code
406 * @sshdr: sshdr to be examined
407 */
408static void scsi_report_sense(struct scsi_device *sdev,
409 struct scsi_sense_hdr *sshdr)
410{
411 enum scsi_device_event evt_type = SDEV_EVT_MAXBITS; /* i.e. none */
412
413 if (sshdr->sense_key == UNIT_ATTENTION) {
414 if (sshdr->asc == 0x3f && sshdr->ascq == 0x03) {
415 evt_type = SDEV_EVT_INQUIRY_CHANGE_REPORTED;
416 sdev_printk(KERN_WARNING, sdev,
417 "Inquiry data has changed");
418 } else if (sshdr->asc == 0x3f && sshdr->ascq == 0x0e) {
419 evt_type = SDEV_EVT_LUN_CHANGE_REPORTED;
420 scsi_report_lun_change(sdev);
421 sdev_printk(KERN_WARNING, sdev,
422 "Warning! Received an indication that the "
423 "LUN assignments on this target have "
424 "changed. The Linux SCSI layer does not "
425 "automatically remap LUN assignments.\n");
426 } else if (sshdr->asc == 0x3f)
427 sdev_printk(KERN_WARNING, sdev,
428 "Warning! Received an indication that the "
429 "operating parameters on this target have "
430 "changed. The Linux SCSI layer does not "
431 "automatically adjust these parameters.\n");
432
433 if (sshdr->asc == 0x38 && sshdr->ascq == 0x07) {
434 evt_type = SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED;
435 sdev_printk(KERN_WARNING, sdev,
436 "Warning! Received an indication that the "
437 "LUN reached a thin provisioning soft "
438 "threshold.\n");
439 }
440
441 if (sshdr->asc == 0x29) {
442 evt_type = SDEV_EVT_POWER_ON_RESET_OCCURRED;
443 sdev_printk(KERN_WARNING, sdev,
444 "Power-on or device reset occurred\n");
445 }
446
447 if (sshdr->asc == 0x2a && sshdr->ascq == 0x01) {
448 evt_type = SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED;
449 sdev_printk(KERN_WARNING, sdev,
450 "Mode parameters changed");
451 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x06) {
452 evt_type = SDEV_EVT_ALUA_STATE_CHANGE_REPORTED;
453 sdev_printk(KERN_WARNING, sdev,
454 "Asymmetric access state changed");
455 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x09) {
456 evt_type = SDEV_EVT_CAPACITY_CHANGE_REPORTED;
457 sdev_printk(KERN_WARNING, sdev,
458 "Capacity data has changed");
459 } else if (sshdr->asc == 0x2a)
460 sdev_printk(KERN_WARNING, sdev,
461 "Parameters changed");
462 }
463
464 if (evt_type != SDEV_EVT_MAXBITS) {
465 set_bit(evt_type, sdev->pending_events);
466 schedule_work(&sdev->event_work);
467 }
468}
469
470/**
471 * scsi_check_sense - Examine scsi cmd sense
472 * @scmd: Cmd to have sense checked.
473 *
474 * Return value:
475 * SUCCESS or FAILED or NEEDS_RETRY or ADD_TO_MLQUEUE
476 *
477 * Notes:
478 * When a deferred error is detected the current command has
479 * not been executed and needs retrying.
480 */
481int scsi_check_sense(struct scsi_cmnd *scmd)
482{
483 struct scsi_device *sdev = scmd->device;
484 struct scsi_sense_hdr sshdr;
485
486 if (! scsi_command_normalize_sense(scmd, &sshdr))
487 return FAILED; /* no valid sense data */
488
489 scsi_report_sense(sdev, &sshdr);
490
491 if (scsi_sense_is_deferred(&sshdr))
492 return NEEDS_RETRY;
493
494 if (sdev->handler && sdev->handler->check_sense) {
495 int rc;
496
497 rc = sdev->handler->check_sense(sdev, &sshdr);
498 if (rc != SCSI_RETURN_NOT_HANDLED)
499 return rc;
500 /* handler does not care. Drop down to default handling */
501 }
502
503 if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
504 /*
505 * nasty: for mid-layer issued TURs, we need to return the
506 * actual sense data without any recovery attempt. For eh
507 * issued ones, we need to try to recover and interpret
508 */
509 return SUCCESS;
510
511 /*
512 * Previous logic looked for FILEMARK, EOM or ILI which are
513 * mainly associated with tapes and returned SUCCESS.
514 */
515 if (sshdr.response_code == 0x70) {
516 /* fixed format */
517 if (scmd->sense_buffer[2] & 0xe0)
518 return SUCCESS;
519 } else {
520 /*
521 * descriptor format: look for "stream commands sense data
522 * descriptor" (see SSC-3). Assume single sense data
523 * descriptor. Ignore ILI from SBC-2 READ LONG and WRITE LONG.
524 */
525 if ((sshdr.additional_length > 3) &&
526 (scmd->sense_buffer[8] == 0x4) &&
527 (scmd->sense_buffer[11] & 0xe0))
528 return SUCCESS;
529 }
530
531 switch (sshdr.sense_key) {
532 case NO_SENSE:
533 return SUCCESS;
534 case RECOVERED_ERROR:
535 return /* soft_error */ SUCCESS;
536
537 case ABORTED_COMMAND:
538 if (sshdr.asc == 0x10) /* DIF */
539 return SUCCESS;
540
541 if (sshdr.asc == 0x44 && sdev->sdev_bflags & BLIST_RETRY_ITF)
542 return ADD_TO_MLQUEUE;
543 if (sshdr.asc == 0xc1 && sshdr.ascq == 0x01 &&
544 sdev->sdev_bflags & BLIST_RETRY_ASC_C1)
545 return ADD_TO_MLQUEUE;
546
547 return NEEDS_RETRY;
548 case NOT_READY:
549 case UNIT_ATTENTION:
550 /*
551 * if we are expecting a cc/ua because of a bus reset that we
552 * performed, treat this just as a retry. otherwise this is
553 * information that we should pass up to the upper-level driver
554 * so that we can deal with it there.
555 */
556 if (scmd->device->expecting_cc_ua) {
557 /*
558 * Because some device does not queue unit
559 * attentions correctly, we carefully check
560 * additional sense code and qualifier so as
561 * not to squash media change unit attention.
562 */
563 if (sshdr.asc != 0x28 || sshdr.ascq != 0x00) {
564 scmd->device->expecting_cc_ua = 0;
565 return NEEDS_RETRY;
566 }
567 }
568 /*
569 * we might also expect a cc/ua if another LUN on the target
570 * reported a UA with an ASC/ASCQ of 3F 0E -
571 * REPORTED LUNS DATA HAS CHANGED.
572 */
573 if (scmd->device->sdev_target->expecting_lun_change &&
574 sshdr.asc == 0x3f && sshdr.ascq == 0x0e)
575 return NEEDS_RETRY;
576 /*
577 * if the device is in the process of becoming ready, we
578 * should retry.
579 */
580 if ((sshdr.asc == 0x04) && (sshdr.ascq == 0x01))
581 return NEEDS_RETRY;
582 /*
583 * if the device is not started, we need to wake
584 * the error handler to start the motor
585 */
586 if (scmd->device->allow_restart &&
587 (sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
588 return FAILED;
589 /*
590 * Pass the UA upwards for a determination in the completion
591 * functions.
592 */
593 return SUCCESS;
594
595 /* these are not supported */
596 case DATA_PROTECT:
597 if (sshdr.asc == 0x27 && sshdr.ascq == 0x07) {
598 /* Thin provisioning hard threshold reached */
599 set_host_byte(scmd, DID_ALLOC_FAILURE);
600 return SUCCESS;
601 }
602 /* FALLTHROUGH */
603 case COPY_ABORTED:
604 case VOLUME_OVERFLOW:
605 case MISCOMPARE:
606 case BLANK_CHECK:
607 set_host_byte(scmd, DID_TARGET_FAILURE);
608 return SUCCESS;
609
610 case MEDIUM_ERROR:
611 if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
612 sshdr.asc == 0x13 || /* AMNF DATA FIELD */
613 sshdr.asc == 0x14) { /* RECORD NOT FOUND */
614 set_host_byte(scmd, DID_MEDIUM_ERROR);
615 return SUCCESS;
616 }
617 return NEEDS_RETRY;
618
619 case HARDWARE_ERROR:
620 if (scmd->device->retry_hwerror)
621 return ADD_TO_MLQUEUE;
622 else
623 set_host_byte(scmd, DID_TARGET_FAILURE);
624 /* FALLTHROUGH */
625
626 case ILLEGAL_REQUEST:
627 if (sshdr.asc == 0x20 || /* Invalid command operation code */
628 sshdr.asc == 0x21 || /* Logical block address out of range */
629 sshdr.asc == 0x22 || /* Invalid function */
630 sshdr.asc == 0x24 || /* Invalid field in cdb */
631 sshdr.asc == 0x26 || /* Parameter value invalid */
632 sshdr.asc == 0x27) { /* Write protected */
633 set_host_byte(scmd, DID_TARGET_FAILURE);
634 }
635 return SUCCESS;
636
637 default:
638 return SUCCESS;
639 }
640}
641EXPORT_SYMBOL_GPL(scsi_check_sense);
642
643static void scsi_handle_queue_ramp_up(struct scsi_device *sdev)
644{
645 struct scsi_host_template *sht = sdev->host->hostt;
646 struct scsi_device *tmp_sdev;
647
648 if (!sht->track_queue_depth ||
649 sdev->queue_depth >= sdev->max_queue_depth)
650 return;
651
652 if (time_before(jiffies,
653 sdev->last_queue_ramp_up + sdev->queue_ramp_up_period))
654 return;
655
656 if (time_before(jiffies,
657 sdev->last_queue_full_time + sdev->queue_ramp_up_period))
658 return;
659
660 /*
661 * Walk all devices of a target and do
662 * ramp up on them.
663 */
664 shost_for_each_device(tmp_sdev, sdev->host) {
665 if (tmp_sdev->channel != sdev->channel ||
666 tmp_sdev->id != sdev->id ||
667 tmp_sdev->queue_depth == sdev->max_queue_depth)
668 continue;
669
670 scsi_change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1);
671 sdev->last_queue_ramp_up = jiffies;
672 }
673}
674
675static void scsi_handle_queue_full(struct scsi_device *sdev)
676{
677 struct scsi_host_template *sht = sdev->host->hostt;
678 struct scsi_device *tmp_sdev;
679
680 if (!sht->track_queue_depth)
681 return;
682
683 shost_for_each_device(tmp_sdev, sdev->host) {
684 if (tmp_sdev->channel != sdev->channel ||
685 tmp_sdev->id != sdev->id)
686 continue;
687 /*
688 * We do not know the number of commands that were at
689 * the device when we got the queue full so we start
690 * from the highest possible value and work our way down.
691 */
692 scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1);
693 }
694}
695
696/**
697 * scsi_eh_completed_normally - Disposition a eh cmd on return from LLD.
698 * @scmd: SCSI cmd to examine.
699 *
700 * Notes:
701 * This is *only* called when we are examining the status of commands
702 * queued during error recovery. the main difference here is that we
703 * don't allow for the possibility of retries here, and we are a lot
704 * more restrictive about what we consider acceptable.
705 */
706static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
707{
708 /*
709 * first check the host byte, to see if there is anything in there
710 * that would indicate what we need to do.
711 */
712 if (host_byte(scmd->result) == DID_RESET) {
713 /*
714 * rats. we are already in the error handler, so we now
715 * get to try and figure out what to do next. if the sense
716 * is valid, we have a pretty good idea of what to do.
717 * if not, we mark it as FAILED.
718 */
719 return scsi_check_sense(scmd);
720 }
721 if (host_byte(scmd->result) != DID_OK)
722 return FAILED;
723
724 /*
725 * next, check the message byte.
726 */
727 if (msg_byte(scmd->result) != COMMAND_COMPLETE)
728 return FAILED;
729
730 /*
731 * now, check the status byte to see if this indicates
732 * anything special.
733 */
734 switch (status_byte(scmd->result)) {
735 case GOOD:
736 scsi_handle_queue_ramp_up(scmd->device);
737 /* FALLTHROUGH */
738 case COMMAND_TERMINATED:
739 return SUCCESS;
740 case CHECK_CONDITION:
741 return scsi_check_sense(scmd);
742 case CONDITION_GOOD:
743 case INTERMEDIATE_GOOD:
744 case INTERMEDIATE_C_GOOD:
745 /*
746 * who knows? FIXME(eric)
747 */
748 return SUCCESS;
749 case RESERVATION_CONFLICT:
750 if (scmd->cmnd[0] == TEST_UNIT_READY)
751 /* it is a success, we probed the device and
752 * found it */
753 return SUCCESS;
754 /* otherwise, we failed to send the command */
755 return FAILED;
756 case QUEUE_FULL:
757 scsi_handle_queue_full(scmd->device);
758 /* fall through */
759 case BUSY:
760 return NEEDS_RETRY;
761 default:
762 return FAILED;
763 }
764 return FAILED;
765}
766
767/**
768 * scsi_eh_done - Completion function for error handling.
769 * @scmd: Cmd that is done.
770 */
771static void scsi_eh_done(struct scsi_cmnd *scmd)
772{
773 struct completion *eh_action;
774
775 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
776 "%s result: %x\n", __func__, scmd->result));
777
778 eh_action = scmd->device->host->eh_action;
779 if (eh_action)
780 complete(eh_action);
781}
782
783/**
784 * scsi_try_host_reset - ask host adapter to reset itself
785 * @scmd: SCSI cmd to send host reset.
786 */
787static int scsi_try_host_reset(struct scsi_cmnd *scmd)
788{
789 unsigned long flags;
790 int rtn;
791 struct Scsi_Host *host = scmd->device->host;
792 struct scsi_host_template *hostt = host->hostt;
793
794 SCSI_LOG_ERROR_RECOVERY(3,
795 shost_printk(KERN_INFO, host, "Snd Host RST\n"));
796
797 if (!hostt->eh_host_reset_handler)
798 return FAILED;
799
800 rtn = hostt->eh_host_reset_handler(scmd);
801
802 if (rtn == SUCCESS) {
803 if (!hostt->skip_settle_delay)
804 ssleep(HOST_RESET_SETTLE_TIME);
805 spin_lock_irqsave(host->host_lock, flags);
806 scsi_report_bus_reset(host, scmd_channel(scmd));
807 spin_unlock_irqrestore(host->host_lock, flags);
808 }
809
810 return rtn;
811}
812
813/**
814 * scsi_try_bus_reset - ask host to perform a bus reset
815 * @scmd: SCSI cmd to send bus reset.
816 */
817static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
818{
819 unsigned long flags;
820 int rtn;
821 struct Scsi_Host *host = scmd->device->host;
822 struct scsi_host_template *hostt = host->hostt;
823
824 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
825 "%s: Snd Bus RST\n", __func__));
826
827 if (!hostt->eh_bus_reset_handler)
828 return FAILED;
829
830 rtn = hostt->eh_bus_reset_handler(scmd);
831
832 if (rtn == SUCCESS) {
833 if (!hostt->skip_settle_delay)
834 ssleep(BUS_RESET_SETTLE_TIME);
835 spin_lock_irqsave(host->host_lock, flags);
836 scsi_report_bus_reset(host, scmd_channel(scmd));
837 spin_unlock_irqrestore(host->host_lock, flags);
838 }
839
840 return rtn;
841}
842
843static void __scsi_report_device_reset(struct scsi_device *sdev, void *data)
844{
845 sdev->was_reset = 1;
846 sdev->expecting_cc_ua = 1;
847}
848
849/**
850 * scsi_try_target_reset - Ask host to perform a target reset
851 * @scmd: SCSI cmd used to send a target reset
852 *
853 * Notes:
854 * There is no timeout for this operation. if this operation is
855 * unreliable for a given host, then the host itself needs to put a
856 * timer on it, and set the host back to a consistent state prior to
857 * returning.
858 */
859static int scsi_try_target_reset(struct scsi_cmnd *scmd)
860{
861 unsigned long flags;
862 int rtn;
863 struct Scsi_Host *host = scmd->device->host;
864 struct scsi_host_template *hostt = host->hostt;
865
866 if (!hostt->eh_target_reset_handler)
867 return FAILED;
868
869 rtn = hostt->eh_target_reset_handler(scmd);
870 if (rtn == SUCCESS) {
871 spin_lock_irqsave(host->host_lock, flags);
872 __starget_for_each_device(scsi_target(scmd->device), NULL,
873 __scsi_report_device_reset);
874 spin_unlock_irqrestore(host->host_lock, flags);
875 }
876
877 return rtn;
878}
879
880/**
881 * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
882 * @scmd: SCSI cmd used to send BDR
883 *
884 * Notes:
885 * There is no timeout for this operation. if this operation is
886 * unreliable for a given host, then the host itself needs to put a
887 * timer on it, and set the host back to a consistent state prior to
888 * returning.
889 */
890static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
891{
892 int rtn;
893 struct scsi_host_template *hostt = scmd->device->host->hostt;
894
895 if (!hostt->eh_device_reset_handler)
896 return FAILED;
897
898 rtn = hostt->eh_device_reset_handler(scmd);
899 if (rtn == SUCCESS)
900 __scsi_report_device_reset(scmd->device, NULL);
901 return rtn;
902}
903
904/**
905 * scsi_try_to_abort_cmd - Ask host to abort a SCSI command
906 * @hostt: SCSI driver host template
907 * @scmd: SCSI cmd used to send a target reset
908 *
909 * Return value:
910 * SUCCESS, FAILED, or FAST_IO_FAIL
911 *
912 * Notes:
913 * SUCCESS does not necessarily indicate that the command
914 * has been aborted; it only indicates that the LLDDs
915 * has cleared all references to that command.
916 * LLDDs should return FAILED only if an abort was required
917 * but could not be executed. LLDDs should return FAST_IO_FAIL
918 * if the device is temporarily unavailable (eg due to a
919 * link down on FibreChannel)
920 */
921static int scsi_try_to_abort_cmd(struct scsi_host_template *hostt,
922 struct scsi_cmnd *scmd)
923{
924 if (!hostt->eh_abort_handler)
925 return FAILED;
926
927 return hostt->eh_abort_handler(scmd);
928}
929
930static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
931{
932 if (scsi_try_to_abort_cmd(scmd->device->host->hostt, scmd) != SUCCESS)
933 if (scsi_try_bus_device_reset(scmd) != SUCCESS)
934 if (scsi_try_target_reset(scmd) != SUCCESS)
935 if (scsi_try_bus_reset(scmd) != SUCCESS)
936 scsi_try_host_reset(scmd);
937}
938
939/**
940 * scsi_eh_prep_cmnd - Save a scsi command info as part of error recovery
941 * @scmd: SCSI command structure to hijack
942 * @ses: structure to save restore information
943 * @cmnd: CDB to send. Can be NULL if no new cmnd is needed
944 * @cmnd_size: size in bytes of @cmnd (must be <= BLK_MAX_CDB)
945 * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
946 *
947 * This function is used to save a scsi command information before re-execution
948 * as part of the error recovery process. If @sense_bytes is 0 the command
949 * sent must be one that does not transfer any data. If @sense_bytes != 0
950 * @cmnd is ignored and this functions sets up a REQUEST_SENSE command
951 * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer.
952 */
953void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
954 unsigned char *cmnd, int cmnd_size, unsigned sense_bytes)
955{
956 struct scsi_device *sdev = scmd->device;
957
958 /*
959 * We need saved copies of a number of fields - this is because
960 * error handling may need to overwrite these with different values
961 * to run different commands, and once error handling is complete,
962 * we will need to restore these values prior to running the actual
963 * command.
964 */
965 ses->cmd_len = scmd->cmd_len;
966 ses->cmnd = scmd->cmnd;
967 ses->data_direction = scmd->sc_data_direction;
968 ses->sdb = scmd->sdb;
969 ses->result = scmd->result;
970 ses->resid_len = scmd->req.resid_len;
971 ses->underflow = scmd->underflow;
972 ses->prot_op = scmd->prot_op;
973 ses->eh_eflags = scmd->eh_eflags;
974
975 scmd->prot_op = SCSI_PROT_NORMAL;
976 scmd->eh_eflags = 0;
977 scmd->cmnd = ses->eh_cmnd;
978 memset(scmd->cmnd, 0, BLK_MAX_CDB);
979 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
980 scmd->result = 0;
981 scmd->req.resid_len = 0;
982
983 if (sense_bytes) {
984 scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
985 sense_bytes);
986 sg_init_one(&ses->sense_sgl, scmd->sense_buffer,
987 scmd->sdb.length);
988 scmd->sdb.table.sgl = &ses->sense_sgl;
989 scmd->sc_data_direction = DMA_FROM_DEVICE;
990 scmd->sdb.table.nents = scmd->sdb.table.orig_nents = 1;
991 scmd->cmnd[0] = REQUEST_SENSE;
992 scmd->cmnd[4] = scmd->sdb.length;
993 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
994 } else {
995 scmd->sc_data_direction = DMA_NONE;
996 if (cmnd) {
997 BUG_ON(cmnd_size > BLK_MAX_CDB);
998 memcpy(scmd->cmnd, cmnd, cmnd_size);
999 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
1000 }
1001 }
1002
1003 scmd->underflow = 0;
1004
1005 if (sdev->scsi_level <= SCSI_2 && sdev->scsi_level != SCSI_UNKNOWN)
1006 scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
1007 (sdev->lun << 5 & 0xe0);
1008
1009 /*
1010 * Zero the sense buffer. The scsi spec mandates that any
1011 * untransferred sense data should be interpreted as being zero.
1012 */
1013 memset(scmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1014}
1015EXPORT_SYMBOL(scsi_eh_prep_cmnd);
1016
1017/**
1018 * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recovery
1019 * @scmd: SCSI command structure to restore
1020 * @ses: saved information from a coresponding call to scsi_eh_prep_cmnd
1021 *
1022 * Undo any damage done by above scsi_eh_prep_cmnd().
1023 */
1024void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
1025{
1026 /*
1027 * Restore original data
1028 */
1029 scmd->cmd_len = ses->cmd_len;
1030 scmd->cmnd = ses->cmnd;
1031 scmd->sc_data_direction = ses->data_direction;
1032 scmd->sdb = ses->sdb;
1033 scmd->result = ses->result;
1034 scmd->req.resid_len = ses->resid_len;
1035 scmd->underflow = ses->underflow;
1036 scmd->prot_op = ses->prot_op;
1037 scmd->eh_eflags = ses->eh_eflags;
1038}
1039EXPORT_SYMBOL(scsi_eh_restore_cmnd);
1040
1041/**
1042 * scsi_send_eh_cmnd - submit a scsi command as part of error recovery
1043 * @scmd: SCSI command structure to hijack
1044 * @cmnd: CDB to send
1045 * @cmnd_size: size in bytes of @cmnd
1046 * @timeout: timeout for this request
1047 * @sense_bytes: size of sense data to copy or 0
1048 *
1049 * This function is used to send a scsi command down to a target device
1050 * as part of the error recovery process. See also scsi_eh_prep_cmnd() above.
1051 *
1052 * Return value:
1053 * SUCCESS or FAILED or NEEDS_RETRY
1054 */
1055static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
1056 int cmnd_size, int timeout, unsigned sense_bytes)
1057{
1058 struct scsi_device *sdev = scmd->device;
1059 struct Scsi_Host *shost = sdev->host;
1060 DECLARE_COMPLETION_ONSTACK(done);
1061 unsigned long timeleft = timeout, delay;
1062 struct scsi_eh_save ses;
1063 const unsigned long stall_for = msecs_to_jiffies(100);
1064 int rtn;
1065
1066retry:
1067 scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes);
1068 shost->eh_action = &done;
1069
1070 scsi_log_send(scmd);
1071 scmd->scsi_done = scsi_eh_done;
1072
1073 /*
1074 * Lock sdev->state_mutex to avoid that scsi_device_quiesce() can
1075 * change the SCSI device state after we have examined it and before
1076 * .queuecommand() is called.
1077 */
1078 mutex_lock(&sdev->state_mutex);
1079 while (sdev->sdev_state == SDEV_BLOCK && timeleft > 0) {
1080 mutex_unlock(&sdev->state_mutex);
1081 SCSI_LOG_ERROR_RECOVERY(5, sdev_printk(KERN_DEBUG, sdev,
1082 "%s: state %d <> %d\n", __func__, sdev->sdev_state,
1083 SDEV_BLOCK));
1084 delay = min(timeleft, stall_for);
1085 timeleft -= delay;
1086 msleep(jiffies_to_msecs(delay));
1087 mutex_lock(&sdev->state_mutex);
1088 }
1089 if (sdev->sdev_state != SDEV_BLOCK)
1090 rtn = shost->hostt->queuecommand(shost, scmd);
1091 else
1092 rtn = SCSI_MLQUEUE_DEVICE_BUSY;
1093 mutex_unlock(&sdev->state_mutex);
1094
1095 if (rtn) {
1096 if (timeleft > stall_for) {
1097 scsi_eh_restore_cmnd(scmd, &ses);
1098 timeleft -= stall_for;
1099 msleep(jiffies_to_msecs(stall_for));
1100 goto retry;
1101 }
1102 /* signal not to enter either branch of the if () below */
1103 timeleft = 0;
1104 rtn = FAILED;
1105 } else {
1106 timeleft = wait_for_completion_timeout(&done, timeout);
1107 rtn = SUCCESS;
1108 }
1109
1110 shost->eh_action = NULL;
1111
1112 scsi_log_completion(scmd, rtn);
1113
1114 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1115 "%s timeleft: %ld\n",
1116 __func__, timeleft));
1117
1118 /*
1119 * If there is time left scsi_eh_done got called, and we will examine
1120 * the actual status codes to see whether the command actually did
1121 * complete normally, else if we have a zero return and no time left,
1122 * the command must still be pending, so abort it and return FAILED.
1123 * If we never actually managed to issue the command, because
1124 * ->queuecommand() kept returning non zero, use the rtn = FAILED
1125 * value above (so don't execute either branch of the if)
1126 */
1127 if (timeleft) {
1128 rtn = scsi_eh_completed_normally(scmd);
1129 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1130 "%s: scsi_eh_completed_normally %x\n", __func__, rtn));
1131
1132 switch (rtn) {
1133 case SUCCESS:
1134 case NEEDS_RETRY:
1135 case FAILED:
1136 break;
1137 case ADD_TO_MLQUEUE:
1138 rtn = NEEDS_RETRY;
1139 break;
1140 default:
1141 rtn = FAILED;
1142 break;
1143 }
1144 } else if (rtn != FAILED) {
1145 scsi_abort_eh_cmnd(scmd);
1146 rtn = FAILED;
1147 }
1148
1149 scsi_eh_restore_cmnd(scmd, &ses);
1150
1151 return rtn;
1152}
1153
1154/**
1155 * scsi_request_sense - Request sense data from a particular target.
1156 * @scmd: SCSI cmd for request sense.
1157 *
1158 * Notes:
1159 * Some hosts automatically obtain this information, others require
1160 * that we obtain it on our own. This function will *not* return until
1161 * the command either times out, or it completes.
1162 */
1163static int scsi_request_sense(struct scsi_cmnd *scmd)
1164{
1165 return scsi_send_eh_cmnd(scmd, NULL, 0, scmd->device->eh_timeout, ~0);
1166}
1167
1168static int scsi_eh_action(struct scsi_cmnd *scmd, int rtn)
1169{
1170 if (!blk_rq_is_passthrough(scmd->request)) {
1171 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
1172 if (sdrv->eh_action)
1173 rtn = sdrv->eh_action(scmd, rtn);
1174 }
1175 return rtn;
1176}
1177
1178/**
1179 * scsi_eh_finish_cmd - Handle a cmd that eh is finished with.
1180 * @scmd: Original SCSI cmd that eh has finished.
1181 * @done_q: Queue for processed commands.
1182 *
1183 * Notes:
1184 * We don't want to use the normal command completion while we are are
1185 * still handling errors - it may cause other commands to be queued,
1186 * and that would disturb what we are doing. Thus we really want to
1187 * keep a list of pending commands for final completion, and once we
1188 * are ready to leave error handling we handle completion for real.
1189 */
1190void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
1191{
1192 list_move_tail(&scmd->eh_entry, done_q);
1193}
1194EXPORT_SYMBOL(scsi_eh_finish_cmd);
1195
1196/**
1197 * scsi_eh_get_sense - Get device sense data.
1198 * @work_q: Queue of commands to process.
1199 * @done_q: Queue of processed commands.
1200 *
1201 * Description:
1202 * See if we need to request sense information. if so, then get it
1203 * now, so we have a better idea of what to do.
1204 *
1205 * Notes:
1206 * This has the unfortunate side effect that if a shost adapter does
1207 * not automatically request sense information, we end up shutting
1208 * it down before we request it.
1209 *
1210 * All drivers should request sense information internally these days,
1211 * so for now all I have to say is tough noogies if you end up in here.
1212 *
1213 * XXX: Long term this code should go away, but that needs an audit of
1214 * all LLDDs first.
1215 */
1216int scsi_eh_get_sense(struct list_head *work_q,
1217 struct list_head *done_q)
1218{
1219 struct scsi_cmnd *scmd, *next;
1220 struct Scsi_Host *shost;
1221 int rtn;
1222
1223 /*
1224 * If SCSI_EH_ABORT_SCHEDULED has been set, it is timeout IO,
1225 * should not get sense.
1226 */
1227 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1228 if ((scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) ||
1229 SCSI_SENSE_VALID(scmd))
1230 continue;
1231
1232 shost = scmd->device->host;
1233 if (scsi_host_eh_past_deadline(shost)) {
1234 SCSI_LOG_ERROR_RECOVERY(3,
1235 scmd_printk(KERN_INFO, scmd,
1236 "%s: skip request sense, past eh deadline\n",
1237 current->comm));
1238 break;
1239 }
1240 if (status_byte(scmd->result) != CHECK_CONDITION)
1241 /*
1242 * don't request sense if there's no check condition
1243 * status because the error we're processing isn't one
1244 * that has a sense code (and some devices get
1245 * confused by sense requests out of the blue)
1246 */
1247 continue;
1248
1249 SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd,
1250 "%s: requesting sense\n",
1251 current->comm));
1252 rtn = scsi_request_sense(scmd);
1253 if (rtn != SUCCESS)
1254 continue;
1255
1256 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1257 "sense requested, result %x\n", scmd->result));
1258 SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd));
1259
1260 rtn = scsi_decide_disposition(scmd);
1261
1262 /*
1263 * if the result was normal, then just pass it along to the
1264 * upper level.
1265 */
1266 if (rtn == SUCCESS)
1267 /* we don't want this command reissued, just
1268 * finished with the sense data, so set
1269 * retries to the max allowed to ensure it
1270 * won't get reissued */
1271 scmd->retries = scmd->allowed;
1272 else if (rtn != NEEDS_RETRY)
1273 continue;
1274
1275 scsi_eh_finish_cmd(scmd, done_q);
1276 }
1277
1278 return list_empty(work_q);
1279}
1280EXPORT_SYMBOL_GPL(scsi_eh_get_sense);
1281
1282/**
1283 * scsi_eh_tur - Send TUR to device.
1284 * @scmd: &scsi_cmnd to send TUR
1285 *
1286 * Return value:
1287 * 0 - Device is ready. 1 - Device NOT ready.
1288 */
1289static int scsi_eh_tur(struct scsi_cmnd *scmd)
1290{
1291 static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
1292 int retry_cnt = 1, rtn;
1293
1294retry_tur:
1295 rtn = scsi_send_eh_cmnd(scmd, tur_command, 6,
1296 scmd->device->eh_timeout, 0);
1297
1298 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1299 "%s return: %x\n", __func__, rtn));
1300
1301 switch (rtn) {
1302 case NEEDS_RETRY:
1303 if (retry_cnt--)
1304 goto retry_tur;
1305 /*FALLTHRU*/
1306 case SUCCESS:
1307 return 0;
1308 default:
1309 return 1;
1310 }
1311}
1312
1313/**
1314 * scsi_eh_test_devices - check if devices are responding from error recovery.
1315 * @cmd_list: scsi commands in error recovery.
1316 * @work_q: queue for commands which still need more error recovery
1317 * @done_q: queue for commands which are finished
1318 * @try_stu: boolean on if a STU command should be tried in addition to TUR.
1319 *
1320 * Decription:
1321 * Tests if devices are in a working state. Commands to devices now in
1322 * a working state are sent to the done_q while commands to devices which
1323 * are still failing to respond are returned to the work_q for more
1324 * processing.
1325 **/
1326static int scsi_eh_test_devices(struct list_head *cmd_list,
1327 struct list_head *work_q,
1328 struct list_head *done_q, int try_stu)
1329{
1330 struct scsi_cmnd *scmd, *next;
1331 struct scsi_device *sdev;
1332 int finish_cmds;
1333
1334 while (!list_empty(cmd_list)) {
1335 scmd = list_entry(cmd_list->next, struct scsi_cmnd, eh_entry);
1336 sdev = scmd->device;
1337
1338 if (!try_stu) {
1339 if (scsi_host_eh_past_deadline(sdev->host)) {
1340 /* Push items back onto work_q */
1341 list_splice_init(cmd_list, work_q);
1342 SCSI_LOG_ERROR_RECOVERY(3,
1343 sdev_printk(KERN_INFO, sdev,
1344 "%s: skip test device, past eh deadline",
1345 current->comm));
1346 break;
1347 }
1348 }
1349
1350 finish_cmds = !scsi_device_online(scmd->device) ||
1351 (try_stu && !scsi_eh_try_stu(scmd) &&
1352 !scsi_eh_tur(scmd)) ||
1353 !scsi_eh_tur(scmd);
1354
1355 list_for_each_entry_safe(scmd, next, cmd_list, eh_entry)
1356 if (scmd->device == sdev) {
1357 if (finish_cmds &&
1358 (try_stu ||
1359 scsi_eh_action(scmd, SUCCESS) == SUCCESS))
1360 scsi_eh_finish_cmd(scmd, done_q);
1361 else
1362 list_move_tail(&scmd->eh_entry, work_q);
1363 }
1364 }
1365 return list_empty(work_q);
1366}
1367
1368/**
1369 * scsi_eh_try_stu - Send START_UNIT to device.
1370 * @scmd: &scsi_cmnd to send START_UNIT
1371 *
1372 * Return value:
1373 * 0 - Device is ready. 1 - Device NOT ready.
1374 */
1375static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
1376{
1377 static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
1378
1379 if (scmd->device->allow_restart) {
1380 int i, rtn = NEEDS_RETRY;
1381
1382 for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
1383 rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0);
1384
1385 if (rtn == SUCCESS)
1386 return 0;
1387 }
1388
1389 return 1;
1390}
1391
1392 /**
1393 * scsi_eh_stu - send START_UNIT if needed
1394 * @shost: &scsi host being recovered.
1395 * @work_q: &list_head for pending commands.
1396 * @done_q: &list_head for processed commands.
1397 *
1398 * Notes:
1399 * If commands are failing due to not ready, initializing command required,
1400 * try revalidating the device, which will end up sending a start unit.
1401 */
1402static int scsi_eh_stu(struct Scsi_Host *shost,
1403 struct list_head *work_q,
1404 struct list_head *done_q)
1405{
1406 struct scsi_cmnd *scmd, *stu_scmd, *next;
1407 struct scsi_device *sdev;
1408
1409 shost_for_each_device(sdev, shost) {
1410 if (scsi_host_eh_past_deadline(shost)) {
1411 SCSI_LOG_ERROR_RECOVERY(3,
1412 sdev_printk(KERN_INFO, sdev,
1413 "%s: skip START_UNIT, past eh deadline\n",
1414 current->comm));
1415 break;
1416 }
1417 stu_scmd = NULL;
1418 list_for_each_entry(scmd, work_q, eh_entry)
1419 if (scmd->device == sdev && SCSI_SENSE_VALID(scmd) &&
1420 scsi_check_sense(scmd) == FAILED ) {
1421 stu_scmd = scmd;
1422 break;
1423 }
1424
1425 if (!stu_scmd)
1426 continue;
1427
1428 SCSI_LOG_ERROR_RECOVERY(3,
1429 sdev_printk(KERN_INFO, sdev,
1430 "%s: Sending START_UNIT\n",
1431 current->comm));
1432
1433 if (!scsi_eh_try_stu(stu_scmd)) {
1434 if (!scsi_device_online(sdev) ||
1435 !scsi_eh_tur(stu_scmd)) {
1436 list_for_each_entry_safe(scmd, next,
1437 work_q, eh_entry) {
1438 if (scmd->device == sdev &&
1439 scsi_eh_action(scmd, SUCCESS) == SUCCESS)
1440 scsi_eh_finish_cmd(scmd, done_q);
1441 }
1442 }
1443 } else {
1444 SCSI_LOG_ERROR_RECOVERY(3,
1445 sdev_printk(KERN_INFO, sdev,
1446 "%s: START_UNIT failed\n",
1447 current->comm));
1448 }
1449 }
1450
1451 return list_empty(work_q);
1452}
1453
1454
1455/**
1456 * scsi_eh_bus_device_reset - send bdr if needed
1457 * @shost: scsi host being recovered.
1458 * @work_q: &list_head for pending commands.
1459 * @done_q: &list_head for processed commands.
1460 *
1461 * Notes:
1462 * Try a bus device reset. Still, look to see whether we have multiple
1463 * devices that are jammed or not - if we have multiple devices, it
1464 * makes no sense to try bus_device_reset - we really would need to try
1465 * a bus_reset instead.
1466 */
1467static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
1468 struct list_head *work_q,
1469 struct list_head *done_q)
1470{
1471 struct scsi_cmnd *scmd, *bdr_scmd, *next;
1472 struct scsi_device *sdev;
1473 int rtn;
1474
1475 shost_for_each_device(sdev, shost) {
1476 if (scsi_host_eh_past_deadline(shost)) {
1477 SCSI_LOG_ERROR_RECOVERY(3,
1478 sdev_printk(KERN_INFO, sdev,
1479 "%s: skip BDR, past eh deadline\n",
1480 current->comm));
1481 break;
1482 }
1483 bdr_scmd = NULL;
1484 list_for_each_entry(scmd, work_q, eh_entry)
1485 if (scmd->device == sdev) {
1486 bdr_scmd = scmd;
1487 break;
1488 }
1489
1490 if (!bdr_scmd)
1491 continue;
1492
1493 SCSI_LOG_ERROR_RECOVERY(3,
1494 sdev_printk(KERN_INFO, sdev,
1495 "%s: Sending BDR\n", current->comm));
1496 rtn = scsi_try_bus_device_reset(bdr_scmd);
1497 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1498 if (!scsi_device_online(sdev) ||
1499 rtn == FAST_IO_FAIL ||
1500 !scsi_eh_tur(bdr_scmd)) {
1501 list_for_each_entry_safe(scmd, next,
1502 work_q, eh_entry) {
1503 if (scmd->device == sdev &&
1504 scsi_eh_action(scmd, rtn) != FAILED)
1505 scsi_eh_finish_cmd(scmd,
1506 done_q);
1507 }
1508 }
1509 } else {
1510 SCSI_LOG_ERROR_RECOVERY(3,
1511 sdev_printk(KERN_INFO, sdev,
1512 "%s: BDR failed\n", current->comm));
1513 }
1514 }
1515
1516 return list_empty(work_q);
1517}
1518
1519/**
1520 * scsi_eh_target_reset - send target reset if needed
1521 * @shost: scsi host being recovered.
1522 * @work_q: &list_head for pending commands.
1523 * @done_q: &list_head for processed commands.
1524 *
1525 * Notes:
1526 * Try a target reset.
1527 */
1528static int scsi_eh_target_reset(struct Scsi_Host *shost,
1529 struct list_head *work_q,
1530 struct list_head *done_q)
1531{
1532 LIST_HEAD(tmp_list);
1533 LIST_HEAD(check_list);
1534
1535 list_splice_init(work_q, &tmp_list);
1536
1537 while (!list_empty(&tmp_list)) {
1538 struct scsi_cmnd *next, *scmd;
1539 int rtn;
1540 unsigned int id;
1541
1542 if (scsi_host_eh_past_deadline(shost)) {
1543 /* push back on work queue for further processing */
1544 list_splice_init(&check_list, work_q);
1545 list_splice_init(&tmp_list, work_q);
1546 SCSI_LOG_ERROR_RECOVERY(3,
1547 shost_printk(KERN_INFO, shost,
1548 "%s: Skip target reset, past eh deadline\n",
1549 current->comm));
1550 return list_empty(work_q);
1551 }
1552
1553 scmd = list_entry(tmp_list.next, struct scsi_cmnd, eh_entry);
1554 id = scmd_id(scmd);
1555
1556 SCSI_LOG_ERROR_RECOVERY(3,
1557 shost_printk(KERN_INFO, shost,
1558 "%s: Sending target reset to target %d\n",
1559 current->comm, id));
1560 rtn = scsi_try_target_reset(scmd);
1561 if (rtn != SUCCESS && rtn != FAST_IO_FAIL)
1562 SCSI_LOG_ERROR_RECOVERY(3,
1563 shost_printk(KERN_INFO, shost,
1564 "%s: Target reset failed"
1565 " target: %d\n",
1566 current->comm, id));
1567 list_for_each_entry_safe(scmd, next, &tmp_list, eh_entry) {
1568 if (scmd_id(scmd) != id)
1569 continue;
1570
1571 if (rtn == SUCCESS)
1572 list_move_tail(&scmd->eh_entry, &check_list);
1573 else if (rtn == FAST_IO_FAIL)
1574 scsi_eh_finish_cmd(scmd, done_q);
1575 else
1576 /* push back on work queue for further processing */
1577 list_move(&scmd->eh_entry, work_q);
1578 }
1579 }
1580
1581 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1582}
1583
1584/**
1585 * scsi_eh_bus_reset - send a bus reset
1586 * @shost: &scsi host being recovered.
1587 * @work_q: &list_head for pending commands.
1588 * @done_q: &list_head for processed commands.
1589 */
1590static int scsi_eh_bus_reset(struct Scsi_Host *shost,
1591 struct list_head *work_q,
1592 struct list_head *done_q)
1593{
1594 struct scsi_cmnd *scmd, *chan_scmd, *next;
1595 LIST_HEAD(check_list);
1596 unsigned int channel;
1597 int rtn;
1598
1599 /*
1600 * we really want to loop over the various channels, and do this on
1601 * a channel by channel basis. we should also check to see if any
1602 * of the failed commands are on soft_reset devices, and if so, skip
1603 * the reset.
1604 */
1605
1606 for (channel = 0; channel <= shost->max_channel; channel++) {
1607 if (scsi_host_eh_past_deadline(shost)) {
1608 list_splice_init(&check_list, work_q);
1609 SCSI_LOG_ERROR_RECOVERY(3,
1610 shost_printk(KERN_INFO, shost,
1611 "%s: skip BRST, past eh deadline\n",
1612 current->comm));
1613 return list_empty(work_q);
1614 }
1615
1616 chan_scmd = NULL;
1617 list_for_each_entry(scmd, work_q, eh_entry) {
1618 if (channel == scmd_channel(scmd)) {
1619 chan_scmd = scmd;
1620 break;
1621 /*
1622 * FIXME add back in some support for
1623 * soft_reset devices.
1624 */
1625 }
1626 }
1627
1628 if (!chan_scmd)
1629 continue;
1630 SCSI_LOG_ERROR_RECOVERY(3,
1631 shost_printk(KERN_INFO, shost,
1632 "%s: Sending BRST chan: %d\n",
1633 current->comm, channel));
1634 rtn = scsi_try_bus_reset(chan_scmd);
1635 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1636 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1637 if (channel == scmd_channel(scmd)) {
1638 if (rtn == FAST_IO_FAIL)
1639 scsi_eh_finish_cmd(scmd,
1640 done_q);
1641 else
1642 list_move_tail(&scmd->eh_entry,
1643 &check_list);
1644 }
1645 }
1646 } else {
1647 SCSI_LOG_ERROR_RECOVERY(3,
1648 shost_printk(KERN_INFO, shost,
1649 "%s: BRST failed chan: %d\n",
1650 current->comm, channel));
1651 }
1652 }
1653 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1654}
1655
1656/**
1657 * scsi_eh_host_reset - send a host reset
1658 * @shost: host to be reset.
1659 * @work_q: &list_head for pending commands.
1660 * @done_q: &list_head for processed commands.
1661 */
1662static int scsi_eh_host_reset(struct Scsi_Host *shost,
1663 struct list_head *work_q,
1664 struct list_head *done_q)
1665{
1666 struct scsi_cmnd *scmd, *next;
1667 LIST_HEAD(check_list);
1668 int rtn;
1669
1670 if (!list_empty(work_q)) {
1671 scmd = list_entry(work_q->next,
1672 struct scsi_cmnd, eh_entry);
1673
1674 SCSI_LOG_ERROR_RECOVERY(3,
1675 shost_printk(KERN_INFO, shost,
1676 "%s: Sending HRST\n",
1677 current->comm));
1678
1679 rtn = scsi_try_host_reset(scmd);
1680 if (rtn == SUCCESS) {
1681 list_splice_init(work_q, &check_list);
1682 } else if (rtn == FAST_IO_FAIL) {
1683 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1684 scsi_eh_finish_cmd(scmd, done_q);
1685 }
1686 } else {
1687 SCSI_LOG_ERROR_RECOVERY(3,
1688 shost_printk(KERN_INFO, shost,
1689 "%s: HRST failed\n",
1690 current->comm));
1691 }
1692 }
1693 return scsi_eh_test_devices(&check_list, work_q, done_q, 1);
1694}
1695
1696/**
1697 * scsi_eh_offline_sdevs - offline scsi devices that fail to recover
1698 * @work_q: &list_head for pending commands.
1699 * @done_q: &list_head for processed commands.
1700 */
1701static void scsi_eh_offline_sdevs(struct list_head *work_q,
1702 struct list_head *done_q)
1703{
1704 struct scsi_cmnd *scmd, *next;
1705 struct scsi_device *sdev;
1706
1707 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1708 sdev_printk(KERN_INFO, scmd->device, "Device offlined - "
1709 "not ready after error recovery\n");
1710 sdev = scmd->device;
1711
1712 mutex_lock(&sdev->state_mutex);
1713 scsi_device_set_state(sdev, SDEV_OFFLINE);
1714 mutex_unlock(&sdev->state_mutex);
1715
1716 scsi_eh_finish_cmd(scmd, done_q);
1717 }
1718 return;
1719}
1720
1721/**
1722 * scsi_noretry_cmd - determine if command should be failed fast
1723 * @scmd: SCSI cmd to examine.
1724 */
1725int scsi_noretry_cmd(struct scsi_cmnd *scmd)
1726{
1727 switch (host_byte(scmd->result)) {
1728 case DID_OK:
1729 break;
1730 case DID_TIME_OUT:
1731 goto check_type;
1732 case DID_BUS_BUSY:
1733 return (scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT);
1734 case DID_PARITY:
1735 return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
1736 case DID_ERROR:
1737 if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
1738 status_byte(scmd->result) == RESERVATION_CONFLICT)
1739 return 0;
1740 /* fall through */
1741 case DID_SOFT_ERROR:
1742 return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
1743 }
1744
1745 if (status_byte(scmd->result) != CHECK_CONDITION)
1746 return 0;
1747
1748check_type:
1749 /*
1750 * assume caller has checked sense and determined
1751 * the check condition was retryable.
1752 */
1753 if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
1754 blk_rq_is_passthrough(scmd->request))
1755 return 1;
1756 else
1757 return 0;
1758}
1759
1760/**
1761 * scsi_decide_disposition - Disposition a cmd on return from LLD.
1762 * @scmd: SCSI cmd to examine.
1763 *
1764 * Notes:
1765 * This is *only* called when we are examining the status after sending
1766 * out the actual data command. any commands that are queued for error
1767 * recovery (e.g. test_unit_ready) do *not* come through here.
1768 *
1769 * When this routine returns failed, it means the error handler thread
1770 * is woken. In cases where the error code indicates an error that
1771 * doesn't require the error handler read (i.e. we don't need to
1772 * abort/reset), this function should return SUCCESS.
1773 */
1774int scsi_decide_disposition(struct scsi_cmnd *scmd)
1775{
1776 int rtn;
1777
1778 /*
1779 * if the device is offline, then we clearly just pass the result back
1780 * up to the top level.
1781 */
1782 if (!scsi_device_online(scmd->device)) {
1783 SCSI_LOG_ERROR_RECOVERY(5, scmd_printk(KERN_INFO, scmd,
1784 "%s: device offline - report as SUCCESS\n", __func__));
1785 return SUCCESS;
1786 }
1787
1788 /*
1789 * first check the host byte, to see if there is anything in there
1790 * that would indicate what we need to do.
1791 */
1792 switch (host_byte(scmd->result)) {
1793 case DID_PASSTHROUGH:
1794 /*
1795 * no matter what, pass this through to the upper layer.
1796 * nuke this special code so that it looks like we are saying
1797 * did_ok.
1798 */
1799 scmd->result &= 0xff00ffff;
1800 return SUCCESS;
1801 case DID_OK:
1802 /*
1803 * looks good. drop through, and check the next byte.
1804 */
1805 break;
1806 case DID_ABORT:
1807 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
1808 set_host_byte(scmd, DID_TIME_OUT);
1809 return SUCCESS;
1810 }
1811 /* FALLTHROUGH */
1812 case DID_NO_CONNECT:
1813 case DID_BAD_TARGET:
1814 /*
1815 * note - this means that we just report the status back
1816 * to the top level driver, not that we actually think
1817 * that it indicates SUCCESS.
1818 */
1819 return SUCCESS;
1820 case DID_SOFT_ERROR:
1821 /*
1822 * when the low level driver returns did_soft_error,
1823 * it is responsible for keeping an internal retry counter
1824 * in order to avoid endless loops (db)
1825 */
1826 goto maybe_retry;
1827 case DID_IMM_RETRY:
1828 return NEEDS_RETRY;
1829
1830 case DID_REQUEUE:
1831 return ADD_TO_MLQUEUE;
1832 case DID_TRANSPORT_DISRUPTED:
1833 /*
1834 * LLD/transport was disrupted during processing of the IO.
1835 * The transport class is now blocked/blocking,
1836 * and the transport will decide what to do with the IO
1837 * based on its timers and recovery capablilities if
1838 * there are enough retries.
1839 */
1840 goto maybe_retry;
1841 case DID_TRANSPORT_FAILFAST:
1842 /*
1843 * The transport decided to failfast the IO (most likely
1844 * the fast io fail tmo fired), so send IO directly upwards.
1845 */
1846 return SUCCESS;
1847 case DID_ERROR:
1848 if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
1849 status_byte(scmd->result) == RESERVATION_CONFLICT)
1850 /*
1851 * execute reservation conflict processing code
1852 * lower down
1853 */
1854 break;
1855 /* fallthrough */
1856 case DID_BUS_BUSY:
1857 case DID_PARITY:
1858 goto maybe_retry;
1859 case DID_TIME_OUT:
1860 /*
1861 * when we scan the bus, we get timeout messages for
1862 * these commands if there is no device available.
1863 * other hosts report did_no_connect for the same thing.
1864 */
1865 if ((scmd->cmnd[0] == TEST_UNIT_READY ||
1866 scmd->cmnd[0] == INQUIRY)) {
1867 return SUCCESS;
1868 } else {
1869 return FAILED;
1870 }
1871 case DID_RESET:
1872 return SUCCESS;
1873 default:
1874 return FAILED;
1875 }
1876
1877 /*
1878 * next, check the message byte.
1879 */
1880 if (msg_byte(scmd->result) != COMMAND_COMPLETE)
1881 return FAILED;
1882
1883 /*
1884 * check the status byte to see if this indicates anything special.
1885 */
1886 switch (status_byte(scmd->result)) {
1887 case QUEUE_FULL:
1888 scsi_handle_queue_full(scmd->device);
1889 /*
1890 * the case of trying to send too many commands to a
1891 * tagged queueing device.
1892 */
1893 /* FALLTHROUGH */
1894 case BUSY:
1895 /*
1896 * device can't talk to us at the moment. Should only
1897 * occur (SAM-3) when the task queue is empty, so will cause
1898 * the empty queue handling to trigger a stall in the
1899 * device.
1900 */
1901 return ADD_TO_MLQUEUE;
1902 case GOOD:
1903 if (scmd->cmnd[0] == REPORT_LUNS)
1904 scmd->device->sdev_target->expecting_lun_change = 0;
1905 scsi_handle_queue_ramp_up(scmd->device);
1906 /* FALLTHROUGH */
1907 case COMMAND_TERMINATED:
1908 return SUCCESS;
1909 case TASK_ABORTED:
1910 goto maybe_retry;
1911 case CHECK_CONDITION:
1912 rtn = scsi_check_sense(scmd);
1913 if (rtn == NEEDS_RETRY)
1914 goto maybe_retry;
1915 /* if rtn == FAILED, we have no sense information;
1916 * returning FAILED will wake the error handler thread
1917 * to collect the sense and redo the decide
1918 * disposition */
1919 return rtn;
1920 case CONDITION_GOOD:
1921 case INTERMEDIATE_GOOD:
1922 case INTERMEDIATE_C_GOOD:
1923 case ACA_ACTIVE:
1924 /*
1925 * who knows? FIXME(eric)
1926 */
1927 return SUCCESS;
1928
1929 case RESERVATION_CONFLICT:
1930 sdev_printk(KERN_INFO, scmd->device,
1931 "reservation conflict\n");
1932 set_host_byte(scmd, DID_NEXUS_FAILURE);
1933 return SUCCESS; /* causes immediate i/o error */
1934 default:
1935 return FAILED;
1936 }
1937 return FAILED;
1938
1939maybe_retry:
1940
1941 /* we requeue for retry because the error was retryable, and
1942 * the request was not marked fast fail. Note that above,
1943 * even if the request is marked fast fail, we still requeue
1944 * for queue congestion conditions (QUEUE_FULL or BUSY) */
1945 if ((++scmd->retries) <= scmd->allowed
1946 && !scsi_noretry_cmd(scmd)) {
1947 return NEEDS_RETRY;
1948 } else {
1949 /*
1950 * no more retries - report this one back to upper level.
1951 */
1952 return SUCCESS;
1953 }
1954}
1955
1956static void eh_lock_door_done(struct request *req, blk_status_t status)
1957{
1958 blk_put_request(req);
1959}
1960
1961/**
1962 * scsi_eh_lock_door - Prevent medium removal for the specified device
1963 * @sdev: SCSI device to prevent medium removal
1964 *
1965 * Locking:
1966 * We must be called from process context.
1967 *
1968 * Notes:
1969 * We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
1970 * head of the devices request queue, and continue.
1971 */
1972static void scsi_eh_lock_door(struct scsi_device *sdev)
1973{
1974 struct request *req;
1975 struct scsi_request *rq;
1976
1977 req = blk_get_request(sdev->request_queue, REQ_OP_SCSI_IN, 0);
1978 if (IS_ERR(req))
1979 return;
1980 rq = scsi_req(req);
1981
1982 rq->cmd[0] = ALLOW_MEDIUM_REMOVAL;
1983 rq->cmd[1] = 0;
1984 rq->cmd[2] = 0;
1985 rq->cmd[3] = 0;
1986 rq->cmd[4] = SCSI_REMOVAL_PREVENT;
1987 rq->cmd[5] = 0;
1988 rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
1989
1990 req->rq_flags |= RQF_QUIET;
1991 req->timeout = 10 * HZ;
1992 rq->retries = 5;
1993
1994 blk_execute_rq_nowait(req->q, NULL, req, 1, eh_lock_door_done);
1995}
1996
1997/**
1998 * scsi_restart_operations - restart io operations to the specified host.
1999 * @shost: Host we are restarting.
2000 *
2001 * Notes:
2002 * When we entered the error handler, we blocked all further i/o to
2003 * this device. we need to 'reverse' this process.
2004 */
2005static void scsi_restart_operations(struct Scsi_Host *shost)
2006{
2007 struct scsi_device *sdev;
2008 unsigned long flags;
2009
2010 /*
2011 * If the door was locked, we need to insert a door lock request
2012 * onto the head of the SCSI request queue for the device. There
2013 * is no point trying to lock the door of an off-line device.
2014 */
2015 shost_for_each_device(sdev, shost) {
2016 if (scsi_device_online(sdev) && sdev->was_reset && sdev->locked) {
2017 scsi_eh_lock_door(sdev);
2018 sdev->was_reset = 0;
2019 }
2020 }
2021
2022 /*
2023 * next free up anything directly waiting upon the host. this
2024 * will be requests for character device operations, and also for
2025 * ioctls to queued block devices.
2026 */
2027 SCSI_LOG_ERROR_RECOVERY(3,
2028 shost_printk(KERN_INFO, shost, "waking up host to restart\n"));
2029
2030 spin_lock_irqsave(shost->host_lock, flags);
2031 if (scsi_host_set_state(shost, SHOST_RUNNING))
2032 if (scsi_host_set_state(shost, SHOST_CANCEL))
2033 BUG_ON(scsi_host_set_state(shost, SHOST_DEL));
2034 spin_unlock_irqrestore(shost->host_lock, flags);
2035
2036 wake_up(&shost->host_wait);
2037
2038 /*
2039 * finally we need to re-initiate requests that may be pending. we will
2040 * have had everything blocked while error handling is taking place, and
2041 * now that error recovery is done, we will need to ensure that these
2042 * requests are started.
2043 */
2044 scsi_run_host_queues(shost);
2045
2046 /*
2047 * if eh is active and host_eh_scheduled is pending we need to re-run
2048 * recovery. we do this check after scsi_run_host_queues() to allow
2049 * everything pent up since the last eh run a chance to make forward
2050 * progress before we sync again. Either we'll immediately re-run
2051 * recovery or scsi_device_unbusy() will wake us again when these
2052 * pending commands complete.
2053 */
2054 spin_lock_irqsave(shost->host_lock, flags);
2055 if (shost->host_eh_scheduled)
2056 if (scsi_host_set_state(shost, SHOST_RECOVERY))
2057 WARN_ON(scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY));
2058 spin_unlock_irqrestore(shost->host_lock, flags);
2059}
2060
2061/**
2062 * scsi_eh_ready_devs - check device ready state and recover if not.
2063 * @shost: host to be recovered.
2064 * @work_q: &list_head for pending commands.
2065 * @done_q: &list_head for processed commands.
2066 */
2067void scsi_eh_ready_devs(struct Scsi_Host *shost,
2068 struct list_head *work_q,
2069 struct list_head *done_q)
2070{
2071 if (!scsi_eh_stu(shost, work_q, done_q))
2072 if (!scsi_eh_bus_device_reset(shost, work_q, done_q))
2073 if (!scsi_eh_target_reset(shost, work_q, done_q))
2074 if (!scsi_eh_bus_reset(shost, work_q, done_q))
2075 if (!scsi_eh_host_reset(shost, work_q, done_q))
2076 scsi_eh_offline_sdevs(work_q,
2077 done_q);
2078}
2079EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
2080
2081/**
2082 * scsi_eh_flush_done_q - finish processed commands or retry them.
2083 * @done_q: list_head of processed commands.
2084 */
2085void scsi_eh_flush_done_q(struct list_head *done_q)
2086{
2087 struct scsi_cmnd *scmd, *next;
2088
2089 list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
2090 list_del_init(&scmd->eh_entry);
2091 if (scsi_device_online(scmd->device) &&
2092 !scsi_noretry_cmd(scmd) &&
2093 (++scmd->retries <= scmd->allowed)) {
2094 SCSI_LOG_ERROR_RECOVERY(3,
2095 scmd_printk(KERN_INFO, scmd,
2096 "%s: flush retry cmd\n",
2097 current->comm));
2098 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
2099 } else {
2100 /*
2101 * If just we got sense for the device (called
2102 * scsi_eh_get_sense), scmd->result is already
2103 * set, do not set DRIVER_TIMEOUT.
2104 */
2105 if (!scmd->result)
2106 scmd->result |= (DRIVER_TIMEOUT << 24);
2107 SCSI_LOG_ERROR_RECOVERY(3,
2108 scmd_printk(KERN_INFO, scmd,
2109 "%s: flush finish cmd\n",
2110 current->comm));
2111 scsi_finish_command(scmd);
2112 }
2113 }
2114}
2115EXPORT_SYMBOL(scsi_eh_flush_done_q);
2116
2117/**
2118 * scsi_unjam_host - Attempt to fix a host which has a cmd that failed.
2119 * @shost: Host to unjam.
2120 *
2121 * Notes:
2122 * When we come in here, we *know* that all commands on the bus have
2123 * either completed, failed or timed out. we also know that no further
2124 * commands are being sent to the host, so things are relatively quiet
2125 * and we have freedom to fiddle with things as we wish.
2126 *
2127 * This is only the *default* implementation. it is possible for
2128 * individual drivers to supply their own version of this function, and
2129 * if the maintainer wishes to do this, it is strongly suggested that
2130 * this function be taken as a template and modified. this function
2131 * was designed to correctly handle problems for about 95% of the
2132 * different cases out there, and it should always provide at least a
2133 * reasonable amount of error recovery.
2134 *
2135 * Any command marked 'failed' or 'timeout' must eventually have
2136 * scsi_finish_cmd() called for it. we do all of the retry stuff
2137 * here, so when we restart the host after we return it should have an
2138 * empty queue.
2139 */
2140static void scsi_unjam_host(struct Scsi_Host *shost)
2141{
2142 unsigned long flags;
2143 LIST_HEAD(eh_work_q);
2144 LIST_HEAD(eh_done_q);
2145
2146 spin_lock_irqsave(shost->host_lock, flags);
2147 list_splice_init(&shost->eh_cmd_q, &eh_work_q);
2148 spin_unlock_irqrestore(shost->host_lock, flags);
2149
2150 SCSI_LOG_ERROR_RECOVERY(1, scsi_eh_prt_fail_stats(shost, &eh_work_q));
2151
2152 if (!scsi_eh_get_sense(&eh_work_q, &eh_done_q))
2153 scsi_eh_ready_devs(shost, &eh_work_q, &eh_done_q);
2154
2155 spin_lock_irqsave(shost->host_lock, flags);
2156 if (shost->eh_deadline != -1)
2157 shost->last_reset = 0;
2158 spin_unlock_irqrestore(shost->host_lock, flags);
2159 scsi_eh_flush_done_q(&eh_done_q);
2160}
2161
2162/**
2163 * scsi_error_handler - SCSI error handler thread
2164 * @data: Host for which we are running.
2165 *
2166 * Notes:
2167 * This is the main error handling loop. This is run as a kernel thread
2168 * for every SCSI host and handles all error handling activity.
2169 */
2170int scsi_error_handler(void *data)
2171{
2172 struct Scsi_Host *shost = data;
2173
2174 /*
2175 * We use TASK_INTERRUPTIBLE so that the thread is not
2176 * counted against the load average as a running process.
2177 * We never actually get interrupted because kthread_run
2178 * disables signal delivery for the created thread.
2179 */
2180 while (true) {
2181 /*
2182 * The sequence in kthread_stop() sets the stop flag first
2183 * then wakes the process. To avoid missed wakeups, the task
2184 * should always be in a non running state before the stop
2185 * flag is checked
2186 */
2187 set_current_state(TASK_INTERRUPTIBLE);
2188 if (kthread_should_stop())
2189 break;
2190
2191 if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) ||
2192 shost->host_failed != scsi_host_busy(shost)) {
2193 SCSI_LOG_ERROR_RECOVERY(1,
2194 shost_printk(KERN_INFO, shost,
2195 "scsi_eh_%d: sleeping\n",
2196 shost->host_no));
2197 schedule();
2198 continue;
2199 }
2200
2201 __set_current_state(TASK_RUNNING);
2202 SCSI_LOG_ERROR_RECOVERY(1,
2203 shost_printk(KERN_INFO, shost,
2204 "scsi_eh_%d: waking up %d/%d/%d\n",
2205 shost->host_no, shost->host_eh_scheduled,
2206 shost->host_failed,
2207 scsi_host_busy(shost)));
2208
2209 /*
2210 * We have a host that is failing for some reason. Figure out
2211 * what we need to do to get it up and online again (if we can).
2212 * If we fail, we end up taking the thing offline.
2213 */
2214 if (!shost->eh_noresume && scsi_autopm_get_host(shost) != 0) {
2215 SCSI_LOG_ERROR_RECOVERY(1,
2216 shost_printk(KERN_ERR, shost,
2217 "scsi_eh_%d: unable to autoresume\n",
2218 shost->host_no));
2219 continue;
2220 }
2221
2222 if (shost->transportt->eh_strategy_handler)
2223 shost->transportt->eh_strategy_handler(shost);
2224 else
2225 scsi_unjam_host(shost);
2226
2227 /* All scmds have been handled */
2228 shost->host_failed = 0;
2229
2230 /*
2231 * Note - if the above fails completely, the action is to take
2232 * individual devices offline and flush the queue of any
2233 * outstanding requests that may have been pending. When we
2234 * restart, we restart any I/O to any other devices on the bus
2235 * which are still online.
2236 */
2237 scsi_restart_operations(shost);
2238 if (!shost->eh_noresume)
2239 scsi_autopm_put_host(shost);
2240 }
2241 __set_current_state(TASK_RUNNING);
2242
2243 SCSI_LOG_ERROR_RECOVERY(1,
2244 shost_printk(KERN_INFO, shost,
2245 "Error handler scsi_eh_%d exiting\n",
2246 shost->host_no));
2247 shost->ehandler = NULL;
2248 return 0;
2249}
2250
2251/*
2252 * Function: scsi_report_bus_reset()
2253 *
2254 * Purpose: Utility function used by low-level drivers to report that
2255 * they have observed a bus reset on the bus being handled.
2256 *
2257 * Arguments: shost - Host in question
2258 * channel - channel on which reset was observed.
2259 *
2260 * Returns: Nothing
2261 *
2262 * Lock status: Host lock must be held.
2263 *
2264 * Notes: This only needs to be called if the reset is one which
2265 * originates from an unknown location. Resets originated
2266 * by the mid-level itself don't need to call this, but there
2267 * should be no harm.
2268 *
2269 * The main purpose of this is to make sure that a CHECK_CONDITION
2270 * is properly treated.
2271 */
2272void scsi_report_bus_reset(struct Scsi_Host *shost, int channel)
2273{
2274 struct scsi_device *sdev;
2275
2276 __shost_for_each_device(sdev, shost) {
2277 if (channel == sdev_channel(sdev))
2278 __scsi_report_device_reset(sdev, NULL);
2279 }
2280}
2281EXPORT_SYMBOL(scsi_report_bus_reset);
2282
2283/*
2284 * Function: scsi_report_device_reset()
2285 *
2286 * Purpose: Utility function used by low-level drivers to report that
2287 * they have observed a device reset on the device being handled.
2288 *
2289 * Arguments: shost - Host in question
2290 * channel - channel on which reset was observed
2291 * target - target on which reset was observed
2292 *
2293 * Returns: Nothing
2294 *
2295 * Lock status: Host lock must be held
2296 *
2297 * Notes: This only needs to be called if the reset is one which
2298 * originates from an unknown location. Resets originated
2299 * by the mid-level itself don't need to call this, but there
2300 * should be no harm.
2301 *
2302 * The main purpose of this is to make sure that a CHECK_CONDITION
2303 * is properly treated.
2304 */
2305void scsi_report_device_reset(struct Scsi_Host *shost, int channel, int target)
2306{
2307 struct scsi_device *sdev;
2308
2309 __shost_for_each_device(sdev, shost) {
2310 if (channel == sdev_channel(sdev) &&
2311 target == sdev_id(sdev))
2312 __scsi_report_device_reset(sdev, NULL);
2313 }
2314}
2315EXPORT_SYMBOL(scsi_report_device_reset);
2316
2317static void
2318scsi_reset_provider_done_command(struct scsi_cmnd *scmd)
2319{
2320}
2321
2322/**
2323 * scsi_ioctl_reset: explicitly reset a host/bus/target/device
2324 * @dev: scsi_device to operate on
2325 * @arg: reset type (see sg.h)
2326 */
2327int
2328scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
2329{
2330 struct scsi_cmnd *scmd;
2331 struct Scsi_Host *shost = dev->host;
2332 struct request *rq;
2333 unsigned long flags;
2334 int error = 0, rtn, val;
2335
2336 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
2337 return -EACCES;
2338
2339 error = get_user(val, arg);
2340 if (error)
2341 return error;
2342
2343 if (scsi_autopm_get_host(shost) < 0)
2344 return -EIO;
2345
2346 error = -EIO;
2347 rq = kzalloc(sizeof(struct request) + sizeof(struct scsi_cmnd) +
2348 shost->hostt->cmd_size, GFP_KERNEL);
2349 if (!rq)
2350 goto out_put_autopm_host;
2351 blk_rq_init(NULL, rq);
2352
2353 scmd = (struct scsi_cmnd *)(rq + 1);
2354 scsi_init_command(dev, scmd);
2355 scmd->request = rq;
2356 scmd->cmnd = scsi_req(rq)->cmd;
2357
2358 scmd->scsi_done = scsi_reset_provider_done_command;
2359 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
2360
2361 scmd->cmd_len = 0;
2362
2363 scmd->sc_data_direction = DMA_BIDIRECTIONAL;
2364
2365 spin_lock_irqsave(shost->host_lock, flags);
2366 shost->tmf_in_progress = 1;
2367 spin_unlock_irqrestore(shost->host_lock, flags);
2368
2369 switch (val & ~SG_SCSI_RESET_NO_ESCALATE) {
2370 case SG_SCSI_RESET_NOTHING:
2371 rtn = SUCCESS;
2372 break;
2373 case SG_SCSI_RESET_DEVICE:
2374 rtn = scsi_try_bus_device_reset(scmd);
2375 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2376 break;
2377 /* FALLTHROUGH */
2378 case SG_SCSI_RESET_TARGET:
2379 rtn = scsi_try_target_reset(scmd);
2380 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2381 break;
2382 /* FALLTHROUGH */
2383 case SG_SCSI_RESET_BUS:
2384 rtn = scsi_try_bus_reset(scmd);
2385 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2386 break;
2387 /* FALLTHROUGH */
2388 case SG_SCSI_RESET_HOST:
2389 rtn = scsi_try_host_reset(scmd);
2390 if (rtn == SUCCESS)
2391 break;
2392 /* FALLTHROUGH */
2393 default:
2394 rtn = FAILED;
2395 break;
2396 }
2397
2398 error = (rtn == SUCCESS) ? 0 : -EIO;
2399
2400 spin_lock_irqsave(shost->host_lock, flags);
2401 shost->tmf_in_progress = 0;
2402 spin_unlock_irqrestore(shost->host_lock, flags);
2403
2404 /*
2405 * be sure to wake up anyone who was sleeping or had their queue
2406 * suspended while we performed the TMF.
2407 */
2408 SCSI_LOG_ERROR_RECOVERY(3,
2409 shost_printk(KERN_INFO, shost,
2410 "waking up host to restart after TMF\n"));
2411
2412 wake_up(&shost->host_wait);
2413 scsi_run_host_queues(shost);
2414
2415 scsi_put_command(scmd);
2416 kfree(rq);
2417
2418out_put_autopm_host:
2419 scsi_autopm_put_host(shost);
2420 return error;
2421}
2422
2423bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
2424 struct scsi_sense_hdr *sshdr)
2425{
2426 return scsi_normalize_sense(cmd->sense_buffer,
2427 SCSI_SENSE_BUFFERSIZE, sshdr);
2428}
2429EXPORT_SYMBOL(scsi_command_normalize_sense);
2430
2431/**
2432 * scsi_get_sense_info_fld - get information field from sense data (either fixed or descriptor format)
2433 * @sense_buffer: byte array of sense data
2434 * @sb_len: number of valid bytes in sense_buffer
2435 * @info_out: pointer to 64 integer where 8 or 4 byte information
2436 * field will be placed if found.
2437 *
2438 * Return value:
2439 * true if information field found, false if not found.
2440 */
2441bool scsi_get_sense_info_fld(const u8 *sense_buffer, int sb_len,
2442 u64 *info_out)
2443{
2444 const u8 * ucp;
2445
2446 if (sb_len < 7)
2447 return false;
2448 switch (sense_buffer[0] & 0x7f) {
2449 case 0x70:
2450 case 0x71:
2451 if (sense_buffer[0] & 0x80) {
2452 *info_out = get_unaligned_be32(&sense_buffer[3]);
2453 return true;
2454 }
2455 return false;
2456 case 0x72:
2457 case 0x73:
2458 ucp = scsi_sense_desc_find(sense_buffer, sb_len,
2459 0 /* info desc */);
2460 if (ucp && (0xa == ucp[1])) {
2461 *info_out = get_unaligned_be64(&ucp[4]);
2462 return true;
2463 }
2464 return false;
2465 default:
2466 return false;
2467 }
2468}
2469EXPORT_SYMBOL(scsi_get_sense_info_fld);