Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * scsi_error.c Copyright (C) 1997 Eric Youngdale
4 *
5 * SCSI error/timeout handling
6 * Initial versions: Eric Youngdale. Based upon conversations with
7 * Leonard Zubkoff and David Miller at Linux Expo,
8 * ideas originating from all over the place.
9 *
10 * Restructured scsi_unjam_host and associated functions.
11 * September 04, 2002 Mike Anderson (andmike@us.ibm.com)
12 *
13 * Forward port of Russell King's (rmk@arm.linux.org.uk) changes and
14 * minor cleanups.
15 * September 30, 2002 Mike Anderson (andmike@us.ibm.com)
16 */
17
18#include <linux/module.h>
19#include <linux/sched.h>
20#include <linux/gfp.h>
21#include <linux/timer.h>
22#include <linux/string.h>
23#include <linux/kernel.h>
24#include <linux/freezer.h>
25#include <linux/kthread.h>
26#include <linux/interrupt.h>
27#include <linux/blkdev.h>
28#include <linux/delay.h>
29#include <linux/jiffies.h>
30
31#include <scsi/scsi.h>
32#include <scsi/scsi_cmnd.h>
33#include <scsi/scsi_dbg.h>
34#include <scsi/scsi_device.h>
35#include <scsi/scsi_driver.h>
36#include <scsi/scsi_eh.h>
37#include <scsi/scsi_common.h>
38#include <scsi/scsi_transport.h>
39#include <scsi/scsi_host.h>
40#include <scsi/scsi_ioctl.h>
41#include <scsi/scsi_dh.h>
42#include <scsi/scsi_devinfo.h>
43#include <scsi/sg.h>
44
45#include "scsi_priv.h"
46#include "scsi_logging.h"
47#include "scsi_transport_api.h"
48
49#include <trace/events/scsi.h>
50
51#include <asm/unaligned.h>
52
53/*
54 * These should *probably* be handled by the host itself.
55 * Since it is allowed to sleep, it probably should.
56 */
57#define BUS_RESET_SETTLE_TIME (10)
58#define HOST_RESET_SETTLE_TIME (10)
59
60static int scsi_eh_try_stu(struct scsi_cmnd *scmd);
61static enum scsi_disposition scsi_try_to_abort_cmd(const struct scsi_host_template *,
62 struct scsi_cmnd *);
63
64void scsi_eh_wakeup(struct Scsi_Host *shost, unsigned int busy)
65{
66 lockdep_assert_held(shost->host_lock);
67
68 if (busy == shost->host_failed) {
69 trace_scsi_eh_wakeup(shost);
70 wake_up_process(shost->ehandler);
71 SCSI_LOG_ERROR_RECOVERY(5, shost_printk(KERN_INFO, shost,
72 "Waking error handler thread\n"));
73 }
74}
75
76/**
77 * scsi_schedule_eh - schedule EH for SCSI host
78 * @shost: SCSI host to invoke error handling on.
79 *
80 * Schedule SCSI EH without scmd.
81 */
82void scsi_schedule_eh(struct Scsi_Host *shost)
83{
84 unsigned long flags;
85
86 spin_lock_irqsave(shost->host_lock, flags);
87
88 if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 ||
89 scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) {
90 shost->host_eh_scheduled++;
91 scsi_eh_wakeup(shost, scsi_host_busy(shost));
92 }
93
94 spin_unlock_irqrestore(shost->host_lock, flags);
95}
96EXPORT_SYMBOL_GPL(scsi_schedule_eh);
97
98static int scsi_host_eh_past_deadline(struct Scsi_Host *shost)
99{
100 if (!shost->last_reset || shost->eh_deadline == -1)
101 return 0;
102
103 /*
104 * 32bit accesses are guaranteed to be atomic
105 * (on all supported architectures), so instead
106 * of using a spinlock we can as well double check
107 * if eh_deadline has been set to 'off' during the
108 * time_before call.
109 */
110 if (time_before(jiffies, shost->last_reset + shost->eh_deadline) &&
111 shost->eh_deadline > -1)
112 return 0;
113
114 return 1;
115}
116
117static bool scsi_cmd_retry_allowed(struct scsi_cmnd *cmd)
118{
119 if (cmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT)
120 return true;
121
122 return ++cmd->retries <= cmd->allowed;
123}
124
125static bool scsi_eh_should_retry_cmd(struct scsi_cmnd *cmd)
126{
127 struct scsi_device *sdev = cmd->device;
128 struct Scsi_Host *host = sdev->host;
129
130 if (host->hostt->eh_should_retry_cmd)
131 return host->hostt->eh_should_retry_cmd(cmd);
132
133 return true;
134}
135
136/**
137 * scmd_eh_abort_handler - Handle command aborts
138 * @work: command to be aborted.
139 *
140 * Note: this function must be called only for a command that has timed out.
141 * Because the block layer marks a request as complete before it calls
142 * scsi_timeout(), a .scsi_done() call from the LLD for a command that has
143 * timed out do not have any effect. Hence it is safe to call
144 * scsi_finish_command() from this function.
145 */
146void
147scmd_eh_abort_handler(struct work_struct *work)
148{
149 struct scsi_cmnd *scmd =
150 container_of(work, struct scsi_cmnd, abort_work.work);
151 struct scsi_device *sdev = scmd->device;
152 struct Scsi_Host *shost = sdev->host;
153 enum scsi_disposition rtn;
154 unsigned long flags;
155
156 if (scsi_host_eh_past_deadline(shost)) {
157 SCSI_LOG_ERROR_RECOVERY(3,
158 scmd_printk(KERN_INFO, scmd,
159 "eh timeout, not aborting\n"));
160 goto out;
161 }
162
163 SCSI_LOG_ERROR_RECOVERY(3,
164 scmd_printk(KERN_INFO, scmd,
165 "aborting command\n"));
166 rtn = scsi_try_to_abort_cmd(shost->hostt, scmd);
167 if (rtn != SUCCESS) {
168 SCSI_LOG_ERROR_RECOVERY(3,
169 scmd_printk(KERN_INFO, scmd,
170 "cmd abort %s\n",
171 (rtn == FAST_IO_FAIL) ?
172 "not send" : "failed"));
173 goto out;
174 }
175 set_host_byte(scmd, DID_TIME_OUT);
176 if (scsi_host_eh_past_deadline(shost)) {
177 SCSI_LOG_ERROR_RECOVERY(3,
178 scmd_printk(KERN_INFO, scmd,
179 "eh timeout, not retrying "
180 "aborted command\n"));
181 goto out;
182 }
183
184 spin_lock_irqsave(shost->host_lock, flags);
185 list_del_init(&scmd->eh_entry);
186
187 /*
188 * If the abort succeeds, and there is no further
189 * EH action, clear the ->last_reset time.
190 */
191 if (list_empty(&shost->eh_abort_list) &&
192 list_empty(&shost->eh_cmd_q))
193 if (shost->eh_deadline != -1)
194 shost->last_reset = 0;
195
196 spin_unlock_irqrestore(shost->host_lock, flags);
197
198 if (!scsi_noretry_cmd(scmd) &&
199 scsi_cmd_retry_allowed(scmd) &&
200 scsi_eh_should_retry_cmd(scmd)) {
201 SCSI_LOG_ERROR_RECOVERY(3,
202 scmd_printk(KERN_WARNING, scmd,
203 "retry aborted command\n"));
204 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
205 } else {
206 SCSI_LOG_ERROR_RECOVERY(3,
207 scmd_printk(KERN_WARNING, scmd,
208 "finish aborted command\n"));
209 scsi_finish_command(scmd);
210 }
211 return;
212
213out:
214 spin_lock_irqsave(shost->host_lock, flags);
215 list_del_init(&scmd->eh_entry);
216 spin_unlock_irqrestore(shost->host_lock, flags);
217
218 scsi_eh_scmd_add(scmd);
219}
220
221/**
222 * scsi_abort_command - schedule a command abort
223 * @scmd: scmd to abort.
224 *
225 * We only need to abort commands after a command timeout
226 */
227static int
228scsi_abort_command(struct scsi_cmnd *scmd)
229{
230 struct scsi_device *sdev = scmd->device;
231 struct Scsi_Host *shost = sdev->host;
232 unsigned long flags;
233
234 if (!shost->hostt->eh_abort_handler) {
235 /* No abort handler, fail command directly */
236 return FAILED;
237 }
238
239 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
240 /*
241 * Retry after abort failed, escalate to next level.
242 */
243 SCSI_LOG_ERROR_RECOVERY(3,
244 scmd_printk(KERN_INFO, scmd,
245 "previous abort failed\n"));
246 BUG_ON(delayed_work_pending(&scmd->abort_work));
247 return FAILED;
248 }
249
250 spin_lock_irqsave(shost->host_lock, flags);
251 if (shost->eh_deadline != -1 && !shost->last_reset)
252 shost->last_reset = jiffies;
253 BUG_ON(!list_empty(&scmd->eh_entry));
254 list_add_tail(&scmd->eh_entry, &shost->eh_abort_list);
255 spin_unlock_irqrestore(shost->host_lock, flags);
256
257 scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED;
258 SCSI_LOG_ERROR_RECOVERY(3,
259 scmd_printk(KERN_INFO, scmd, "abort scheduled\n"));
260 queue_delayed_work(shost->tmf_work_q, &scmd->abort_work, HZ / 100);
261 return SUCCESS;
262}
263
264/**
265 * scsi_eh_reset - call into ->eh_action to reset internal counters
266 * @scmd: scmd to run eh on.
267 *
268 * The scsi driver might be carrying internal state about the
269 * devices, so we need to call into the driver to reset the
270 * internal state once the error handler is started.
271 */
272static void scsi_eh_reset(struct scsi_cmnd *scmd)
273{
274 if (!blk_rq_is_passthrough(scsi_cmd_to_rq(scmd))) {
275 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
276 if (sdrv->eh_reset)
277 sdrv->eh_reset(scmd);
278 }
279}
280
281static void scsi_eh_inc_host_failed(struct rcu_head *head)
282{
283 struct scsi_cmnd *scmd = container_of(head, typeof(*scmd), rcu);
284 struct Scsi_Host *shost = scmd->device->host;
285 unsigned int busy = scsi_host_busy(shost);
286 unsigned long flags;
287
288 spin_lock_irqsave(shost->host_lock, flags);
289 shost->host_failed++;
290 scsi_eh_wakeup(shost, busy);
291 spin_unlock_irqrestore(shost->host_lock, flags);
292}
293
294/**
295 * scsi_eh_scmd_add - add scsi cmd to error handling.
296 * @scmd: scmd to run eh on.
297 */
298void scsi_eh_scmd_add(struct scsi_cmnd *scmd)
299{
300 struct Scsi_Host *shost = scmd->device->host;
301 unsigned long flags;
302 int ret;
303
304 WARN_ON_ONCE(!shost->ehandler);
305 WARN_ON_ONCE(!test_bit(SCMD_STATE_INFLIGHT, &scmd->state));
306
307 spin_lock_irqsave(shost->host_lock, flags);
308 if (scsi_host_set_state(shost, SHOST_RECOVERY)) {
309 ret = scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY);
310 WARN_ON_ONCE(ret);
311 }
312 if (shost->eh_deadline != -1 && !shost->last_reset)
313 shost->last_reset = jiffies;
314
315 scsi_eh_reset(scmd);
316 list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
317 spin_unlock_irqrestore(shost->host_lock, flags);
318 /*
319 * Ensure that all tasks observe the host state change before the
320 * host_failed change.
321 */
322 call_rcu_hurry(&scmd->rcu, scsi_eh_inc_host_failed);
323}
324
325/**
326 * scsi_timeout - Timeout function for normal scsi commands.
327 * @req: request that is timing out.
328 *
329 * Notes:
330 * We do not need to lock this. There is the potential for a race
331 * only in that the normal completion handling might run, but if the
332 * normal completion function determines that the timer has already
333 * fired, then it mustn't do anything.
334 */
335enum blk_eh_timer_return scsi_timeout(struct request *req)
336{
337 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
338 struct Scsi_Host *host = scmd->device->host;
339
340 trace_scsi_dispatch_cmd_timeout(scmd);
341 scsi_log_completion(scmd, TIMEOUT_ERROR);
342
343 atomic_inc(&scmd->device->iotmo_cnt);
344 if (host->eh_deadline != -1 && !host->last_reset)
345 host->last_reset = jiffies;
346
347 if (host->hostt->eh_timed_out) {
348 switch (host->hostt->eh_timed_out(scmd)) {
349 case SCSI_EH_DONE:
350 return BLK_EH_DONE;
351 case SCSI_EH_RESET_TIMER:
352 return BLK_EH_RESET_TIMER;
353 case SCSI_EH_NOT_HANDLED:
354 break;
355 }
356 }
357
358 /*
359 * If scsi_done() has already set SCMD_STATE_COMPLETE, do not modify
360 * *scmd.
361 */
362 if (test_and_set_bit(SCMD_STATE_COMPLETE, &scmd->state))
363 return BLK_EH_DONE;
364 atomic_inc(&scmd->device->iodone_cnt);
365 if (scsi_abort_command(scmd) != SUCCESS) {
366 set_host_byte(scmd, DID_TIME_OUT);
367 scsi_eh_scmd_add(scmd);
368 }
369
370 return BLK_EH_DONE;
371}
372
373/**
374 * scsi_block_when_processing_errors - Prevent cmds from being queued.
375 * @sdev: Device on which we are performing recovery.
376 *
377 * Description:
378 * We block until the host is out of error recovery, and then check to
379 * see whether the host or the device is offline.
380 *
381 * Return value:
382 * 0 when dev was taken offline by error recovery. 1 OK to proceed.
383 */
384int scsi_block_when_processing_errors(struct scsi_device *sdev)
385{
386 int online;
387
388 wait_event(sdev->host->host_wait, !scsi_host_in_recovery(sdev->host));
389
390 online = scsi_device_online(sdev);
391
392 return online;
393}
394EXPORT_SYMBOL(scsi_block_when_processing_errors);
395
396#ifdef CONFIG_SCSI_LOGGING
397/**
398 * scsi_eh_prt_fail_stats - Log info on failures.
399 * @shost: scsi host being recovered.
400 * @work_q: Queue of scsi cmds to process.
401 */
402static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
403 struct list_head *work_q)
404{
405 struct scsi_cmnd *scmd;
406 struct scsi_device *sdev;
407 int total_failures = 0;
408 int cmd_failed = 0;
409 int cmd_cancel = 0;
410 int devices_failed = 0;
411
412 shost_for_each_device(sdev, shost) {
413 list_for_each_entry(scmd, work_q, eh_entry) {
414 if (scmd->device == sdev) {
415 ++total_failures;
416 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED)
417 ++cmd_cancel;
418 else
419 ++cmd_failed;
420 }
421 }
422
423 if (cmd_cancel || cmd_failed) {
424 SCSI_LOG_ERROR_RECOVERY(3,
425 shost_printk(KERN_INFO, shost,
426 "%s: cmds failed: %d, cancel: %d\n",
427 __func__, cmd_failed,
428 cmd_cancel));
429 cmd_cancel = 0;
430 cmd_failed = 0;
431 ++devices_failed;
432 }
433 }
434
435 SCSI_LOG_ERROR_RECOVERY(2, shost_printk(KERN_INFO, shost,
436 "Total of %d commands on %d"
437 " devices require eh work\n",
438 total_failures, devices_failed));
439}
440#endif
441
442 /**
443 * scsi_report_lun_change - Set flag on all *other* devices on the same target
444 * to indicate that a UNIT ATTENTION is expected.
445 * @sdev: Device reporting the UNIT ATTENTION
446 */
447static void scsi_report_lun_change(struct scsi_device *sdev)
448{
449 sdev->sdev_target->expecting_lun_change = 1;
450}
451
452/**
453 * scsi_report_sense - Examine scsi sense information and log messages for
454 * certain conditions, also issue uevents for some of them.
455 * @sdev: Device reporting the sense code
456 * @sshdr: sshdr to be examined
457 */
458static void scsi_report_sense(struct scsi_device *sdev,
459 struct scsi_sense_hdr *sshdr)
460{
461 enum scsi_device_event evt_type = SDEV_EVT_MAXBITS; /* i.e. none */
462
463 if (sshdr->sense_key == UNIT_ATTENTION) {
464 if (sshdr->asc == 0x3f && sshdr->ascq == 0x03) {
465 evt_type = SDEV_EVT_INQUIRY_CHANGE_REPORTED;
466 sdev_printk(KERN_WARNING, sdev,
467 "Inquiry data has changed");
468 } else if (sshdr->asc == 0x3f && sshdr->ascq == 0x0e) {
469 evt_type = SDEV_EVT_LUN_CHANGE_REPORTED;
470 scsi_report_lun_change(sdev);
471 sdev_printk(KERN_WARNING, sdev,
472 "LUN assignments on this target have "
473 "changed. The Linux SCSI layer does not "
474 "automatically remap LUN assignments.\n");
475 } else if (sshdr->asc == 0x3f)
476 sdev_printk(KERN_WARNING, sdev,
477 "Operating parameters on this target have "
478 "changed. The Linux SCSI layer does not "
479 "automatically adjust these parameters.\n");
480
481 if (sshdr->asc == 0x38 && sshdr->ascq == 0x07) {
482 evt_type = SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED;
483 sdev_printk(KERN_WARNING, sdev,
484 "Warning! Received an indication that the "
485 "LUN reached a thin provisioning soft "
486 "threshold.\n");
487 }
488
489 if (sshdr->asc == 0x29) {
490 evt_type = SDEV_EVT_POWER_ON_RESET_OCCURRED;
491 /*
492 * Do not print message if it is an expected side-effect
493 * of runtime PM.
494 */
495 if (!sdev->silence_suspend)
496 sdev_printk(KERN_WARNING, sdev,
497 "Power-on or device reset occurred\n");
498 }
499
500 if (sshdr->asc == 0x2a && sshdr->ascq == 0x01) {
501 evt_type = SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED;
502 sdev_printk(KERN_WARNING, sdev,
503 "Mode parameters changed");
504 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x06) {
505 evt_type = SDEV_EVT_ALUA_STATE_CHANGE_REPORTED;
506 sdev_printk(KERN_WARNING, sdev,
507 "Asymmetric access state changed");
508 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x09) {
509 evt_type = SDEV_EVT_CAPACITY_CHANGE_REPORTED;
510 sdev_printk(KERN_WARNING, sdev,
511 "Capacity data has changed");
512 } else if (sshdr->asc == 0x2a)
513 sdev_printk(KERN_WARNING, sdev,
514 "Parameters changed");
515 }
516
517 if (evt_type != SDEV_EVT_MAXBITS) {
518 set_bit(evt_type, sdev->pending_events);
519 schedule_work(&sdev->event_work);
520 }
521}
522
523static inline void set_scsi_ml_byte(struct scsi_cmnd *cmd, u8 status)
524{
525 cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
526}
527
528/**
529 * scsi_check_sense - Examine scsi cmd sense
530 * @scmd: Cmd to have sense checked.
531 *
532 * Return value:
533 * SUCCESS or FAILED or NEEDS_RETRY or ADD_TO_MLQUEUE
534 *
535 * Notes:
536 * When a deferred error is detected the current command has
537 * not been executed and needs retrying.
538 */
539enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
540{
541 struct request *req = scsi_cmd_to_rq(scmd);
542 struct scsi_device *sdev = scmd->device;
543 struct scsi_sense_hdr sshdr;
544
545 if (! scsi_command_normalize_sense(scmd, &sshdr))
546 return FAILED; /* no valid sense data */
547
548 scsi_report_sense(sdev, &sshdr);
549
550 if (scsi_sense_is_deferred(&sshdr))
551 return NEEDS_RETRY;
552
553 if (sdev->handler && sdev->handler->check_sense) {
554 enum scsi_disposition rc;
555
556 rc = sdev->handler->check_sense(sdev, &sshdr);
557 if (rc != SCSI_RETURN_NOT_HANDLED)
558 return rc;
559 /* handler does not care. Drop down to default handling */
560 }
561
562 if (scmd->cmnd[0] == TEST_UNIT_READY &&
563 scmd->submitter != SUBMITTED_BY_SCSI_ERROR_HANDLER)
564 /*
565 * nasty: for mid-layer issued TURs, we need to return the
566 * actual sense data without any recovery attempt. For eh
567 * issued ones, we need to try to recover and interpret
568 */
569 return SUCCESS;
570
571 /*
572 * Previous logic looked for FILEMARK, EOM or ILI which are
573 * mainly associated with tapes and returned SUCCESS.
574 */
575 if (sshdr.response_code == 0x70) {
576 /* fixed format */
577 if (scmd->sense_buffer[2] & 0xe0)
578 return SUCCESS;
579 } else {
580 /*
581 * descriptor format: look for "stream commands sense data
582 * descriptor" (see SSC-3). Assume single sense data
583 * descriptor. Ignore ILI from SBC-2 READ LONG and WRITE LONG.
584 */
585 if ((sshdr.additional_length > 3) &&
586 (scmd->sense_buffer[8] == 0x4) &&
587 (scmd->sense_buffer[11] & 0xe0))
588 return SUCCESS;
589 }
590
591 switch (sshdr.sense_key) {
592 case NO_SENSE:
593 return SUCCESS;
594 case RECOVERED_ERROR:
595 return /* soft_error */ SUCCESS;
596
597 case ABORTED_COMMAND:
598 if (sshdr.asc == 0x10) /* DIF */
599 return SUCCESS;
600
601 /*
602 * Check aborts due to command duration limit policy:
603 * ABORTED COMMAND additional sense code with the
604 * COMMAND TIMEOUT BEFORE PROCESSING or
605 * COMMAND TIMEOUT DURING PROCESSING or
606 * COMMAND TIMEOUT DURING PROCESSING DUE TO ERROR RECOVERY
607 * additional sense code qualifiers.
608 */
609 if (sshdr.asc == 0x2e &&
610 sshdr.ascq >= 0x01 && sshdr.ascq <= 0x03) {
611 set_scsi_ml_byte(scmd, SCSIML_STAT_DL_TIMEOUT);
612 req->cmd_flags |= REQ_FAILFAST_DEV;
613 req->rq_flags |= RQF_QUIET;
614 return SUCCESS;
615 }
616
617 if (sshdr.asc == 0x44 && sdev->sdev_bflags & BLIST_RETRY_ITF)
618 return ADD_TO_MLQUEUE;
619 if (sshdr.asc == 0xc1 && sshdr.ascq == 0x01 &&
620 sdev->sdev_bflags & BLIST_RETRY_ASC_C1)
621 return ADD_TO_MLQUEUE;
622
623 return NEEDS_RETRY;
624 case NOT_READY:
625 case UNIT_ATTENTION:
626 /*
627 * if we are expecting a cc/ua because of a bus reset that we
628 * performed, treat this just as a retry. otherwise this is
629 * information that we should pass up to the upper-level driver
630 * so that we can deal with it there.
631 */
632 if (scmd->device->expecting_cc_ua) {
633 /*
634 * Because some device does not queue unit
635 * attentions correctly, we carefully check
636 * additional sense code and qualifier so as
637 * not to squash media change unit attention.
638 */
639 if (sshdr.asc != 0x28 || sshdr.ascq != 0x00) {
640 scmd->device->expecting_cc_ua = 0;
641 return NEEDS_RETRY;
642 }
643 }
644 /*
645 * we might also expect a cc/ua if another LUN on the target
646 * reported a UA with an ASC/ASCQ of 3F 0E -
647 * REPORTED LUNS DATA HAS CHANGED.
648 */
649 if (scmd->device->sdev_target->expecting_lun_change &&
650 sshdr.asc == 0x3f && sshdr.ascq == 0x0e)
651 return NEEDS_RETRY;
652 /*
653 * if the device is in the process of becoming ready, we
654 * should retry.
655 */
656 if ((sshdr.asc == 0x04) && (sshdr.ascq == 0x01))
657 return NEEDS_RETRY;
658 /*
659 * if the device is not started, we need to wake
660 * the error handler to start the motor
661 */
662 if (scmd->device->allow_restart &&
663 (sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
664 return FAILED;
665 /*
666 * Pass the UA upwards for a determination in the completion
667 * functions.
668 */
669 return SUCCESS;
670
671 /* these are not supported */
672 case DATA_PROTECT:
673 if (sshdr.asc == 0x27 && sshdr.ascq == 0x07) {
674 /* Thin provisioning hard threshold reached */
675 set_scsi_ml_byte(scmd, SCSIML_STAT_NOSPC);
676 return SUCCESS;
677 }
678 fallthrough;
679 case COPY_ABORTED:
680 case VOLUME_OVERFLOW:
681 case MISCOMPARE:
682 case BLANK_CHECK:
683 set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
684 return SUCCESS;
685
686 case MEDIUM_ERROR:
687 if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
688 sshdr.asc == 0x13 || /* AMNF DATA FIELD */
689 sshdr.asc == 0x14) { /* RECORD NOT FOUND */
690 set_scsi_ml_byte(scmd, SCSIML_STAT_MED_ERROR);
691 return SUCCESS;
692 }
693 return NEEDS_RETRY;
694
695 case HARDWARE_ERROR:
696 if (scmd->device->retry_hwerror)
697 return ADD_TO_MLQUEUE;
698 else
699 set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
700 fallthrough;
701
702 case ILLEGAL_REQUEST:
703 if (sshdr.asc == 0x20 || /* Invalid command operation code */
704 sshdr.asc == 0x21 || /* Logical block address out of range */
705 sshdr.asc == 0x22 || /* Invalid function */
706 sshdr.asc == 0x24 || /* Invalid field in cdb */
707 sshdr.asc == 0x26 || /* Parameter value invalid */
708 sshdr.asc == 0x27) { /* Write protected */
709 set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
710 }
711 return SUCCESS;
712
713 case COMPLETED:
714 if (sshdr.asc == 0x55 && sshdr.ascq == 0x0a) {
715 set_scsi_ml_byte(scmd, SCSIML_STAT_DL_TIMEOUT);
716 req->cmd_flags |= REQ_FAILFAST_DEV;
717 req->rq_flags |= RQF_QUIET;
718 }
719 return SUCCESS;
720
721 default:
722 return SUCCESS;
723 }
724}
725EXPORT_SYMBOL_GPL(scsi_check_sense);
726
727static void scsi_handle_queue_ramp_up(struct scsi_device *sdev)
728{
729 const struct scsi_host_template *sht = sdev->host->hostt;
730 struct scsi_device *tmp_sdev;
731
732 if (!sht->track_queue_depth ||
733 sdev->queue_depth >= sdev->max_queue_depth)
734 return;
735
736 if (time_before(jiffies,
737 sdev->last_queue_ramp_up + sdev->queue_ramp_up_period))
738 return;
739
740 if (time_before(jiffies,
741 sdev->last_queue_full_time + sdev->queue_ramp_up_period))
742 return;
743
744 /*
745 * Walk all devices of a target and do
746 * ramp up on them.
747 */
748 shost_for_each_device(tmp_sdev, sdev->host) {
749 if (tmp_sdev->channel != sdev->channel ||
750 tmp_sdev->id != sdev->id ||
751 tmp_sdev->queue_depth == sdev->max_queue_depth)
752 continue;
753
754 scsi_change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1);
755 sdev->last_queue_ramp_up = jiffies;
756 }
757}
758
759static void scsi_handle_queue_full(struct scsi_device *sdev)
760{
761 const struct scsi_host_template *sht = sdev->host->hostt;
762 struct scsi_device *tmp_sdev;
763
764 if (!sht->track_queue_depth)
765 return;
766
767 shost_for_each_device(tmp_sdev, sdev->host) {
768 if (tmp_sdev->channel != sdev->channel ||
769 tmp_sdev->id != sdev->id)
770 continue;
771 /*
772 * We do not know the number of commands that were at
773 * the device when we got the queue full so we start
774 * from the highest possible value and work our way down.
775 */
776 scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1);
777 }
778}
779
780/**
781 * scsi_eh_completed_normally - Disposition a eh cmd on return from LLD.
782 * @scmd: SCSI cmd to examine.
783 *
784 * Notes:
785 * This is *only* called when we are examining the status of commands
786 * queued during error recovery. the main difference here is that we
787 * don't allow for the possibility of retries here, and we are a lot
788 * more restrictive about what we consider acceptable.
789 */
790static enum scsi_disposition scsi_eh_completed_normally(struct scsi_cmnd *scmd)
791{
792 /*
793 * first check the host byte, to see if there is anything in there
794 * that would indicate what we need to do.
795 */
796 if (host_byte(scmd->result) == DID_RESET) {
797 /*
798 * rats. we are already in the error handler, so we now
799 * get to try and figure out what to do next. if the sense
800 * is valid, we have a pretty good idea of what to do.
801 * if not, we mark it as FAILED.
802 */
803 return scsi_check_sense(scmd);
804 }
805 if (host_byte(scmd->result) != DID_OK)
806 return FAILED;
807
808 /*
809 * now, check the status byte to see if this indicates
810 * anything special.
811 */
812 switch (get_status_byte(scmd)) {
813 case SAM_STAT_GOOD:
814 scsi_handle_queue_ramp_up(scmd->device);
815 if (scmd->sense_buffer && SCSI_SENSE_VALID(scmd))
816 /*
817 * If we have sense data, call scsi_check_sense() in
818 * order to set the correct SCSI ML byte (if any).
819 * No point in checking the return value, since the
820 * command has already completed successfully.
821 */
822 scsi_check_sense(scmd);
823 fallthrough;
824 case SAM_STAT_COMMAND_TERMINATED:
825 return SUCCESS;
826 case SAM_STAT_CHECK_CONDITION:
827 return scsi_check_sense(scmd);
828 case SAM_STAT_CONDITION_MET:
829 case SAM_STAT_INTERMEDIATE:
830 case SAM_STAT_INTERMEDIATE_CONDITION_MET:
831 /*
832 * who knows? FIXME(eric)
833 */
834 return SUCCESS;
835 case SAM_STAT_RESERVATION_CONFLICT:
836 if (scmd->cmnd[0] == TEST_UNIT_READY)
837 /* it is a success, we probed the device and
838 * found it */
839 return SUCCESS;
840 /* otherwise, we failed to send the command */
841 return FAILED;
842 case SAM_STAT_TASK_SET_FULL:
843 scsi_handle_queue_full(scmd->device);
844 fallthrough;
845 case SAM_STAT_BUSY:
846 return NEEDS_RETRY;
847 default:
848 return FAILED;
849 }
850 return FAILED;
851}
852
853/**
854 * scsi_eh_done - Completion function for error handling.
855 * @scmd: Cmd that is done.
856 */
857void scsi_eh_done(struct scsi_cmnd *scmd)
858{
859 struct completion *eh_action;
860
861 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
862 "%s result: %x\n", __func__, scmd->result));
863
864 eh_action = scmd->device->host->eh_action;
865 if (eh_action)
866 complete(eh_action);
867}
868
869/**
870 * scsi_try_host_reset - ask host adapter to reset itself
871 * @scmd: SCSI cmd to send host reset.
872 */
873static enum scsi_disposition scsi_try_host_reset(struct scsi_cmnd *scmd)
874{
875 unsigned long flags;
876 enum scsi_disposition rtn;
877 struct Scsi_Host *host = scmd->device->host;
878 const struct scsi_host_template *hostt = host->hostt;
879
880 SCSI_LOG_ERROR_RECOVERY(3,
881 shost_printk(KERN_INFO, host, "Snd Host RST\n"));
882
883 if (!hostt->eh_host_reset_handler)
884 return FAILED;
885
886 rtn = hostt->eh_host_reset_handler(scmd);
887
888 if (rtn == SUCCESS) {
889 if (!hostt->skip_settle_delay)
890 ssleep(HOST_RESET_SETTLE_TIME);
891 spin_lock_irqsave(host->host_lock, flags);
892 scsi_report_bus_reset(host, scmd_channel(scmd));
893 spin_unlock_irqrestore(host->host_lock, flags);
894 }
895
896 return rtn;
897}
898
899/**
900 * scsi_try_bus_reset - ask host to perform a bus reset
901 * @scmd: SCSI cmd to send bus reset.
902 */
903static enum scsi_disposition scsi_try_bus_reset(struct scsi_cmnd *scmd)
904{
905 unsigned long flags;
906 enum scsi_disposition rtn;
907 struct Scsi_Host *host = scmd->device->host;
908 const struct scsi_host_template *hostt = host->hostt;
909
910 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
911 "%s: Snd Bus RST\n", __func__));
912
913 if (!hostt->eh_bus_reset_handler)
914 return FAILED;
915
916 rtn = hostt->eh_bus_reset_handler(scmd);
917
918 if (rtn == SUCCESS) {
919 if (!hostt->skip_settle_delay)
920 ssleep(BUS_RESET_SETTLE_TIME);
921 spin_lock_irqsave(host->host_lock, flags);
922 scsi_report_bus_reset(host, scmd_channel(scmd));
923 spin_unlock_irqrestore(host->host_lock, flags);
924 }
925
926 return rtn;
927}
928
929static void __scsi_report_device_reset(struct scsi_device *sdev, void *data)
930{
931 sdev->was_reset = 1;
932 sdev->expecting_cc_ua = 1;
933}
934
935/**
936 * scsi_try_target_reset - Ask host to perform a target reset
937 * @scmd: SCSI cmd used to send a target reset
938 *
939 * Notes:
940 * There is no timeout for this operation. if this operation is
941 * unreliable for a given host, then the host itself needs to put a
942 * timer on it, and set the host back to a consistent state prior to
943 * returning.
944 */
945static enum scsi_disposition scsi_try_target_reset(struct scsi_cmnd *scmd)
946{
947 unsigned long flags;
948 enum scsi_disposition rtn;
949 struct Scsi_Host *host = scmd->device->host;
950 const struct scsi_host_template *hostt = host->hostt;
951
952 if (!hostt->eh_target_reset_handler)
953 return FAILED;
954
955 rtn = hostt->eh_target_reset_handler(scmd);
956 if (rtn == SUCCESS) {
957 spin_lock_irqsave(host->host_lock, flags);
958 __starget_for_each_device(scsi_target(scmd->device), NULL,
959 __scsi_report_device_reset);
960 spin_unlock_irqrestore(host->host_lock, flags);
961 }
962
963 return rtn;
964}
965
966/**
967 * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
968 * @scmd: SCSI cmd used to send BDR
969 *
970 * Notes:
971 * There is no timeout for this operation. if this operation is
972 * unreliable for a given host, then the host itself needs to put a
973 * timer on it, and set the host back to a consistent state prior to
974 * returning.
975 */
976static enum scsi_disposition scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
977{
978 enum scsi_disposition rtn;
979 const struct scsi_host_template *hostt = scmd->device->host->hostt;
980
981 if (!hostt->eh_device_reset_handler)
982 return FAILED;
983
984 rtn = hostt->eh_device_reset_handler(scmd);
985 if (rtn == SUCCESS)
986 __scsi_report_device_reset(scmd->device, NULL);
987 return rtn;
988}
989
990/**
991 * scsi_try_to_abort_cmd - Ask host to abort a SCSI command
992 * @hostt: SCSI driver host template
993 * @scmd: SCSI cmd used to send a target reset
994 *
995 * Return value:
996 * SUCCESS, FAILED, or FAST_IO_FAIL
997 *
998 * Notes:
999 * SUCCESS does not necessarily indicate that the command
1000 * has been aborted; it only indicates that the LLDDs
1001 * has cleared all references to that command.
1002 * LLDDs should return FAILED only if an abort was required
1003 * but could not be executed. LLDDs should return FAST_IO_FAIL
1004 * if the device is temporarily unavailable (eg due to a
1005 * link down on FibreChannel)
1006 */
1007static enum scsi_disposition
1008scsi_try_to_abort_cmd(const struct scsi_host_template *hostt, struct scsi_cmnd *scmd)
1009{
1010 if (!hostt->eh_abort_handler)
1011 return FAILED;
1012
1013 return hostt->eh_abort_handler(scmd);
1014}
1015
1016static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
1017{
1018 if (scsi_try_to_abort_cmd(scmd->device->host->hostt, scmd) != SUCCESS)
1019 if (scsi_try_bus_device_reset(scmd) != SUCCESS)
1020 if (scsi_try_target_reset(scmd) != SUCCESS)
1021 if (scsi_try_bus_reset(scmd) != SUCCESS)
1022 scsi_try_host_reset(scmd);
1023}
1024
1025/**
1026 * scsi_eh_prep_cmnd - Save a scsi command info as part of error recovery
1027 * @scmd: SCSI command structure to hijack
1028 * @ses: structure to save restore information
1029 * @cmnd: CDB to send. Can be NULL if no new cmnd is needed
1030 * @cmnd_size: size in bytes of @cmnd (must be <= MAX_COMMAND_SIZE)
1031 * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
1032 *
1033 * This function is used to save a scsi command information before re-execution
1034 * as part of the error recovery process. If @sense_bytes is 0 the command
1035 * sent must be one that does not transfer any data. If @sense_bytes != 0
1036 * @cmnd is ignored and this functions sets up a REQUEST_SENSE command
1037 * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer.
1038 */
1039void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
1040 unsigned char *cmnd, int cmnd_size, unsigned sense_bytes)
1041{
1042 struct scsi_device *sdev = scmd->device;
1043
1044 /*
1045 * We need saved copies of a number of fields - this is because
1046 * error handling may need to overwrite these with different values
1047 * to run different commands, and once error handling is complete,
1048 * we will need to restore these values prior to running the actual
1049 * command.
1050 */
1051 ses->cmd_len = scmd->cmd_len;
1052 ses->data_direction = scmd->sc_data_direction;
1053 ses->sdb = scmd->sdb;
1054 ses->result = scmd->result;
1055 ses->resid_len = scmd->resid_len;
1056 ses->underflow = scmd->underflow;
1057 ses->prot_op = scmd->prot_op;
1058 ses->eh_eflags = scmd->eh_eflags;
1059
1060 scmd->prot_op = SCSI_PROT_NORMAL;
1061 scmd->eh_eflags = 0;
1062 memcpy(ses->cmnd, scmd->cmnd, sizeof(ses->cmnd));
1063 memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
1064 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
1065 scmd->result = 0;
1066 scmd->resid_len = 0;
1067
1068 if (sense_bytes) {
1069 scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
1070 sense_bytes);
1071 sg_init_one(&ses->sense_sgl, scmd->sense_buffer,
1072 scmd->sdb.length);
1073 scmd->sdb.table.sgl = &ses->sense_sgl;
1074 scmd->sc_data_direction = DMA_FROM_DEVICE;
1075 scmd->sdb.table.nents = scmd->sdb.table.orig_nents = 1;
1076 scmd->cmnd[0] = REQUEST_SENSE;
1077 scmd->cmnd[4] = scmd->sdb.length;
1078 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
1079 } else {
1080 scmd->sc_data_direction = DMA_NONE;
1081 if (cmnd) {
1082 BUG_ON(cmnd_size > sizeof(scmd->cmnd));
1083 memcpy(scmd->cmnd, cmnd, cmnd_size);
1084 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
1085 }
1086 }
1087
1088 scmd->underflow = 0;
1089
1090 if (sdev->scsi_level <= SCSI_2 && sdev->scsi_level != SCSI_UNKNOWN)
1091 scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
1092 (sdev->lun << 5 & 0xe0);
1093
1094 /*
1095 * Zero the sense buffer. The scsi spec mandates that any
1096 * untransferred sense data should be interpreted as being zero.
1097 */
1098 memset(scmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1099}
1100EXPORT_SYMBOL(scsi_eh_prep_cmnd);
1101
1102/**
1103 * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recovery
1104 * @scmd: SCSI command structure to restore
1105 * @ses: saved information from a coresponding call to scsi_eh_prep_cmnd
1106 *
1107 * Undo any damage done by above scsi_eh_prep_cmnd().
1108 */
1109void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
1110{
1111 /*
1112 * Restore original data
1113 */
1114 scmd->cmd_len = ses->cmd_len;
1115 memcpy(scmd->cmnd, ses->cmnd, sizeof(ses->cmnd));
1116 scmd->sc_data_direction = ses->data_direction;
1117 scmd->sdb = ses->sdb;
1118 scmd->result = ses->result;
1119 scmd->resid_len = ses->resid_len;
1120 scmd->underflow = ses->underflow;
1121 scmd->prot_op = ses->prot_op;
1122 scmd->eh_eflags = ses->eh_eflags;
1123}
1124EXPORT_SYMBOL(scsi_eh_restore_cmnd);
1125
1126/**
1127 * scsi_send_eh_cmnd - submit a scsi command as part of error recovery
1128 * @scmd: SCSI command structure to hijack
1129 * @cmnd: CDB to send
1130 * @cmnd_size: size in bytes of @cmnd
1131 * @timeout: timeout for this request
1132 * @sense_bytes: size of sense data to copy or 0
1133 *
1134 * This function is used to send a scsi command down to a target device
1135 * as part of the error recovery process. See also scsi_eh_prep_cmnd() above.
1136 *
1137 * Return value:
1138 * SUCCESS or FAILED or NEEDS_RETRY
1139 */
1140static enum scsi_disposition scsi_send_eh_cmnd(struct scsi_cmnd *scmd,
1141 unsigned char *cmnd, int cmnd_size, int timeout, unsigned sense_bytes)
1142{
1143 struct scsi_device *sdev = scmd->device;
1144 struct Scsi_Host *shost = sdev->host;
1145 DECLARE_COMPLETION_ONSTACK(done);
1146 unsigned long timeleft = timeout, delay;
1147 struct scsi_eh_save ses;
1148 const unsigned long stall_for = msecs_to_jiffies(100);
1149 int rtn;
1150
1151retry:
1152 scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes);
1153 shost->eh_action = &done;
1154
1155 scsi_log_send(scmd);
1156 scmd->submitter = SUBMITTED_BY_SCSI_ERROR_HANDLER;
1157 scmd->flags |= SCMD_LAST;
1158
1159 /*
1160 * Lock sdev->state_mutex to avoid that scsi_device_quiesce() can
1161 * change the SCSI device state after we have examined it and before
1162 * .queuecommand() is called.
1163 */
1164 mutex_lock(&sdev->state_mutex);
1165 while (sdev->sdev_state == SDEV_BLOCK && timeleft > 0) {
1166 mutex_unlock(&sdev->state_mutex);
1167 SCSI_LOG_ERROR_RECOVERY(5, sdev_printk(KERN_DEBUG, sdev,
1168 "%s: state %d <> %d\n", __func__, sdev->sdev_state,
1169 SDEV_BLOCK));
1170 delay = min(timeleft, stall_for);
1171 timeleft -= delay;
1172 msleep(jiffies_to_msecs(delay));
1173 mutex_lock(&sdev->state_mutex);
1174 }
1175 if (sdev->sdev_state != SDEV_BLOCK)
1176 rtn = shost->hostt->queuecommand(shost, scmd);
1177 else
1178 rtn = FAILED;
1179 mutex_unlock(&sdev->state_mutex);
1180
1181 if (rtn) {
1182 if (timeleft > stall_for) {
1183 scsi_eh_restore_cmnd(scmd, &ses);
1184
1185 timeleft -= stall_for;
1186 msleep(jiffies_to_msecs(stall_for));
1187 goto retry;
1188 }
1189 /* signal not to enter either branch of the if () below */
1190 timeleft = 0;
1191 rtn = FAILED;
1192 } else {
1193 timeleft = wait_for_completion_timeout(&done, timeout);
1194 rtn = SUCCESS;
1195 }
1196
1197 shost->eh_action = NULL;
1198
1199 scsi_log_completion(scmd, rtn);
1200
1201 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1202 "%s timeleft: %ld\n",
1203 __func__, timeleft));
1204
1205 /*
1206 * If there is time left scsi_eh_done got called, and we will examine
1207 * the actual status codes to see whether the command actually did
1208 * complete normally, else if we have a zero return and no time left,
1209 * the command must still be pending, so abort it and return FAILED.
1210 * If we never actually managed to issue the command, because
1211 * ->queuecommand() kept returning non zero, use the rtn = FAILED
1212 * value above (so don't execute either branch of the if)
1213 */
1214 if (timeleft) {
1215 rtn = scsi_eh_completed_normally(scmd);
1216 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1217 "%s: scsi_eh_completed_normally %x\n", __func__, rtn));
1218
1219 switch (rtn) {
1220 case SUCCESS:
1221 case NEEDS_RETRY:
1222 case FAILED:
1223 break;
1224 case ADD_TO_MLQUEUE:
1225 rtn = NEEDS_RETRY;
1226 break;
1227 default:
1228 rtn = FAILED;
1229 break;
1230 }
1231 } else if (rtn != FAILED) {
1232 scsi_abort_eh_cmnd(scmd);
1233 rtn = FAILED;
1234 }
1235
1236 scsi_eh_restore_cmnd(scmd, &ses);
1237
1238 return rtn;
1239}
1240
1241/**
1242 * scsi_request_sense - Request sense data from a particular target.
1243 * @scmd: SCSI cmd for request sense.
1244 *
1245 * Notes:
1246 * Some hosts automatically obtain this information, others require
1247 * that we obtain it on our own. This function will *not* return until
1248 * the command either times out, or it completes.
1249 */
1250static enum scsi_disposition scsi_request_sense(struct scsi_cmnd *scmd)
1251{
1252 return scsi_send_eh_cmnd(scmd, NULL, 0, scmd->device->eh_timeout, ~0);
1253}
1254
1255static enum scsi_disposition
1256scsi_eh_action(struct scsi_cmnd *scmd, enum scsi_disposition rtn)
1257{
1258 if (!blk_rq_is_passthrough(scsi_cmd_to_rq(scmd))) {
1259 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
1260 if (sdrv->eh_action)
1261 rtn = sdrv->eh_action(scmd, rtn);
1262 }
1263 return rtn;
1264}
1265
1266/**
1267 * scsi_eh_finish_cmd - Handle a cmd that eh is finished with.
1268 * @scmd: Original SCSI cmd that eh has finished.
1269 * @done_q: Queue for processed commands.
1270 *
1271 * Notes:
1272 * We don't want to use the normal command completion while we are are
1273 * still handling errors - it may cause other commands to be queued,
1274 * and that would disturb what we are doing. Thus we really want to
1275 * keep a list of pending commands for final completion, and once we
1276 * are ready to leave error handling we handle completion for real.
1277 */
1278void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
1279{
1280 list_move_tail(&scmd->eh_entry, done_q);
1281}
1282EXPORT_SYMBOL(scsi_eh_finish_cmd);
1283
1284/**
1285 * scsi_eh_get_sense - Get device sense data.
1286 * @work_q: Queue of commands to process.
1287 * @done_q: Queue of processed commands.
1288 *
1289 * Description:
1290 * See if we need to request sense information. if so, then get it
1291 * now, so we have a better idea of what to do.
1292 *
1293 * Notes:
1294 * This has the unfortunate side effect that if a shost adapter does
1295 * not automatically request sense information, we end up shutting
1296 * it down before we request it.
1297 *
1298 * All drivers should request sense information internally these days,
1299 * so for now all I have to say is tough noogies if you end up in here.
1300 *
1301 * XXX: Long term this code should go away, but that needs an audit of
1302 * all LLDDs first.
1303 */
1304int scsi_eh_get_sense(struct list_head *work_q,
1305 struct list_head *done_q)
1306{
1307 struct scsi_cmnd *scmd, *next;
1308 struct Scsi_Host *shost;
1309 enum scsi_disposition rtn;
1310
1311 /*
1312 * If SCSI_EH_ABORT_SCHEDULED has been set, it is timeout IO,
1313 * should not get sense.
1314 */
1315 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1316 if ((scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) ||
1317 SCSI_SENSE_VALID(scmd))
1318 continue;
1319
1320 shost = scmd->device->host;
1321 if (scsi_host_eh_past_deadline(shost)) {
1322 SCSI_LOG_ERROR_RECOVERY(3,
1323 scmd_printk(KERN_INFO, scmd,
1324 "%s: skip request sense, past eh deadline\n",
1325 current->comm));
1326 break;
1327 }
1328 if (!scsi_status_is_check_condition(scmd->result))
1329 /*
1330 * don't request sense if there's no check condition
1331 * status because the error we're processing isn't one
1332 * that has a sense code (and some devices get
1333 * confused by sense requests out of the blue)
1334 */
1335 continue;
1336
1337 SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd,
1338 "%s: requesting sense\n",
1339 current->comm));
1340 rtn = scsi_request_sense(scmd);
1341 if (rtn != SUCCESS)
1342 continue;
1343
1344 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1345 "sense requested, result %x\n", scmd->result));
1346 SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd));
1347
1348 rtn = scsi_decide_disposition(scmd);
1349
1350 /*
1351 * if the result was normal, then just pass it along to the
1352 * upper level.
1353 */
1354 if (rtn == SUCCESS)
1355 /*
1356 * We don't want this command reissued, just finished
1357 * with the sense data, so set retries to the max
1358 * allowed to ensure it won't get reissued. If the user
1359 * has requested infinite retries, we also want to
1360 * finish this command, so force completion by setting
1361 * retries and allowed to the same value.
1362 */
1363 if (scmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT)
1364 scmd->retries = scmd->allowed = 1;
1365 else
1366 scmd->retries = scmd->allowed;
1367 else if (rtn != NEEDS_RETRY)
1368 continue;
1369
1370 scsi_eh_finish_cmd(scmd, done_q);
1371 }
1372
1373 return list_empty(work_q);
1374}
1375EXPORT_SYMBOL_GPL(scsi_eh_get_sense);
1376
1377/**
1378 * scsi_eh_tur - Send TUR to device.
1379 * @scmd: &scsi_cmnd to send TUR
1380 *
1381 * Return value:
1382 * 0 - Device is ready. 1 - Device NOT ready.
1383 */
1384static int scsi_eh_tur(struct scsi_cmnd *scmd)
1385{
1386 static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
1387 int retry_cnt = 1;
1388 enum scsi_disposition rtn;
1389
1390retry_tur:
1391 rtn = scsi_send_eh_cmnd(scmd, tur_command, 6,
1392 scmd->device->eh_timeout, 0);
1393
1394 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1395 "%s return: %x\n", __func__, rtn));
1396
1397 switch (rtn) {
1398 case NEEDS_RETRY:
1399 if (retry_cnt--)
1400 goto retry_tur;
1401 fallthrough;
1402 case SUCCESS:
1403 return 0;
1404 default:
1405 return 1;
1406 }
1407}
1408
1409/**
1410 * scsi_eh_test_devices - check if devices are responding from error recovery.
1411 * @cmd_list: scsi commands in error recovery.
1412 * @work_q: queue for commands which still need more error recovery
1413 * @done_q: queue for commands which are finished
1414 * @try_stu: boolean on if a STU command should be tried in addition to TUR.
1415 *
1416 * Decription:
1417 * Tests if devices are in a working state. Commands to devices now in
1418 * a working state are sent to the done_q while commands to devices which
1419 * are still failing to respond are returned to the work_q for more
1420 * processing.
1421 **/
1422static int scsi_eh_test_devices(struct list_head *cmd_list,
1423 struct list_head *work_q,
1424 struct list_head *done_q, int try_stu)
1425{
1426 struct scsi_cmnd *scmd, *next;
1427 struct scsi_device *sdev;
1428 int finish_cmds;
1429
1430 while (!list_empty(cmd_list)) {
1431 scmd = list_entry(cmd_list->next, struct scsi_cmnd, eh_entry);
1432 sdev = scmd->device;
1433
1434 if (!try_stu) {
1435 if (scsi_host_eh_past_deadline(sdev->host)) {
1436 /* Push items back onto work_q */
1437 list_splice_init(cmd_list, work_q);
1438 SCSI_LOG_ERROR_RECOVERY(3,
1439 sdev_printk(KERN_INFO, sdev,
1440 "%s: skip test device, past eh deadline",
1441 current->comm));
1442 break;
1443 }
1444 }
1445
1446 finish_cmds = !scsi_device_online(scmd->device) ||
1447 (try_stu && !scsi_eh_try_stu(scmd) &&
1448 !scsi_eh_tur(scmd)) ||
1449 !scsi_eh_tur(scmd);
1450
1451 list_for_each_entry_safe(scmd, next, cmd_list, eh_entry)
1452 if (scmd->device == sdev) {
1453 if (finish_cmds &&
1454 (try_stu ||
1455 scsi_eh_action(scmd, SUCCESS) == SUCCESS))
1456 scsi_eh_finish_cmd(scmd, done_q);
1457 else
1458 list_move_tail(&scmd->eh_entry, work_q);
1459 }
1460 }
1461 return list_empty(work_q);
1462}
1463
1464/**
1465 * scsi_eh_try_stu - Send START_UNIT to device.
1466 * @scmd: &scsi_cmnd to send START_UNIT
1467 *
1468 * Return value:
1469 * 0 - Device is ready. 1 - Device NOT ready.
1470 */
1471static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
1472{
1473 static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
1474
1475 if (scmd->device->allow_restart) {
1476 int i;
1477 enum scsi_disposition rtn = NEEDS_RETRY;
1478
1479 for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
1480 rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
1481 scmd->device->eh_timeout, 0);
1482
1483 if (rtn == SUCCESS)
1484 return 0;
1485 }
1486
1487 return 1;
1488}
1489
1490 /**
1491 * scsi_eh_stu - send START_UNIT if needed
1492 * @shost: &scsi host being recovered.
1493 * @work_q: &list_head for pending commands.
1494 * @done_q: &list_head for processed commands.
1495 *
1496 * Notes:
1497 * If commands are failing due to not ready, initializing command required,
1498 * try revalidating the device, which will end up sending a start unit.
1499 */
1500static int scsi_eh_stu(struct Scsi_Host *shost,
1501 struct list_head *work_q,
1502 struct list_head *done_q)
1503{
1504 struct scsi_cmnd *scmd, *stu_scmd, *next;
1505 struct scsi_device *sdev;
1506
1507 shost_for_each_device(sdev, shost) {
1508 if (scsi_host_eh_past_deadline(shost)) {
1509 SCSI_LOG_ERROR_RECOVERY(3,
1510 sdev_printk(KERN_INFO, sdev,
1511 "%s: skip START_UNIT, past eh deadline\n",
1512 current->comm));
1513 scsi_device_put(sdev);
1514 break;
1515 }
1516 stu_scmd = NULL;
1517 list_for_each_entry(scmd, work_q, eh_entry)
1518 if (scmd->device == sdev && SCSI_SENSE_VALID(scmd) &&
1519 scsi_check_sense(scmd) == FAILED ) {
1520 stu_scmd = scmd;
1521 break;
1522 }
1523
1524 if (!stu_scmd)
1525 continue;
1526
1527 SCSI_LOG_ERROR_RECOVERY(3,
1528 sdev_printk(KERN_INFO, sdev,
1529 "%s: Sending START_UNIT\n",
1530 current->comm));
1531
1532 if (!scsi_eh_try_stu(stu_scmd)) {
1533 if (!scsi_device_online(sdev) ||
1534 !scsi_eh_tur(stu_scmd)) {
1535 list_for_each_entry_safe(scmd, next,
1536 work_q, eh_entry) {
1537 if (scmd->device == sdev &&
1538 scsi_eh_action(scmd, SUCCESS) == SUCCESS)
1539 scsi_eh_finish_cmd(scmd, done_q);
1540 }
1541 }
1542 } else {
1543 SCSI_LOG_ERROR_RECOVERY(3,
1544 sdev_printk(KERN_INFO, sdev,
1545 "%s: START_UNIT failed\n",
1546 current->comm));
1547 }
1548 }
1549
1550 return list_empty(work_q);
1551}
1552
1553
1554/**
1555 * scsi_eh_bus_device_reset - send bdr if needed
1556 * @shost: scsi host being recovered.
1557 * @work_q: &list_head for pending commands.
1558 * @done_q: &list_head for processed commands.
1559 *
1560 * Notes:
1561 * Try a bus device reset. Still, look to see whether we have multiple
1562 * devices that are jammed or not - if we have multiple devices, it
1563 * makes no sense to try bus_device_reset - we really would need to try
1564 * a bus_reset instead.
1565 */
1566static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
1567 struct list_head *work_q,
1568 struct list_head *done_q)
1569{
1570 struct scsi_cmnd *scmd, *bdr_scmd, *next;
1571 struct scsi_device *sdev;
1572 enum scsi_disposition rtn;
1573
1574 shost_for_each_device(sdev, shost) {
1575 if (scsi_host_eh_past_deadline(shost)) {
1576 SCSI_LOG_ERROR_RECOVERY(3,
1577 sdev_printk(KERN_INFO, sdev,
1578 "%s: skip BDR, past eh deadline\n",
1579 current->comm));
1580 scsi_device_put(sdev);
1581 break;
1582 }
1583 bdr_scmd = NULL;
1584 list_for_each_entry(scmd, work_q, eh_entry)
1585 if (scmd->device == sdev) {
1586 bdr_scmd = scmd;
1587 break;
1588 }
1589
1590 if (!bdr_scmd)
1591 continue;
1592
1593 SCSI_LOG_ERROR_RECOVERY(3,
1594 sdev_printk(KERN_INFO, sdev,
1595 "%s: Sending BDR\n", current->comm));
1596 rtn = scsi_try_bus_device_reset(bdr_scmd);
1597 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1598 if (!scsi_device_online(sdev) ||
1599 rtn == FAST_IO_FAIL ||
1600 !scsi_eh_tur(bdr_scmd)) {
1601 list_for_each_entry_safe(scmd, next,
1602 work_q, eh_entry) {
1603 if (scmd->device == sdev &&
1604 scsi_eh_action(scmd, rtn) != FAILED)
1605 scsi_eh_finish_cmd(scmd,
1606 done_q);
1607 }
1608 }
1609 } else {
1610 SCSI_LOG_ERROR_RECOVERY(3,
1611 sdev_printk(KERN_INFO, sdev,
1612 "%s: BDR failed\n", current->comm));
1613 }
1614 }
1615
1616 return list_empty(work_q);
1617}
1618
1619/**
1620 * scsi_eh_target_reset - send target reset if needed
1621 * @shost: scsi host being recovered.
1622 * @work_q: &list_head for pending commands.
1623 * @done_q: &list_head for processed commands.
1624 *
1625 * Notes:
1626 * Try a target reset.
1627 */
1628static int scsi_eh_target_reset(struct Scsi_Host *shost,
1629 struct list_head *work_q,
1630 struct list_head *done_q)
1631{
1632 LIST_HEAD(tmp_list);
1633 LIST_HEAD(check_list);
1634
1635 list_splice_init(work_q, &tmp_list);
1636
1637 while (!list_empty(&tmp_list)) {
1638 struct scsi_cmnd *next, *scmd;
1639 enum scsi_disposition rtn;
1640 unsigned int id;
1641
1642 if (scsi_host_eh_past_deadline(shost)) {
1643 /* push back on work queue for further processing */
1644 list_splice_init(&check_list, work_q);
1645 list_splice_init(&tmp_list, work_q);
1646 SCSI_LOG_ERROR_RECOVERY(3,
1647 shost_printk(KERN_INFO, shost,
1648 "%s: Skip target reset, past eh deadline\n",
1649 current->comm));
1650 return list_empty(work_q);
1651 }
1652
1653 scmd = list_entry(tmp_list.next, struct scsi_cmnd, eh_entry);
1654 id = scmd_id(scmd);
1655
1656 SCSI_LOG_ERROR_RECOVERY(3,
1657 shost_printk(KERN_INFO, shost,
1658 "%s: Sending target reset to target %d\n",
1659 current->comm, id));
1660 rtn = scsi_try_target_reset(scmd);
1661 if (rtn != SUCCESS && rtn != FAST_IO_FAIL)
1662 SCSI_LOG_ERROR_RECOVERY(3,
1663 shost_printk(KERN_INFO, shost,
1664 "%s: Target reset failed"
1665 " target: %d\n",
1666 current->comm, id));
1667 list_for_each_entry_safe(scmd, next, &tmp_list, eh_entry) {
1668 if (scmd_id(scmd) != id)
1669 continue;
1670
1671 if (rtn == SUCCESS)
1672 list_move_tail(&scmd->eh_entry, &check_list);
1673 else if (rtn == FAST_IO_FAIL)
1674 scsi_eh_finish_cmd(scmd, done_q);
1675 else
1676 /* push back on work queue for further processing */
1677 list_move(&scmd->eh_entry, work_q);
1678 }
1679 }
1680
1681 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1682}
1683
1684/**
1685 * scsi_eh_bus_reset - send a bus reset
1686 * @shost: &scsi host being recovered.
1687 * @work_q: &list_head for pending commands.
1688 * @done_q: &list_head for processed commands.
1689 */
1690static int scsi_eh_bus_reset(struct Scsi_Host *shost,
1691 struct list_head *work_q,
1692 struct list_head *done_q)
1693{
1694 struct scsi_cmnd *scmd, *chan_scmd, *next;
1695 LIST_HEAD(check_list);
1696 unsigned int channel;
1697 enum scsi_disposition rtn;
1698
1699 /*
1700 * we really want to loop over the various channels, and do this on
1701 * a channel by channel basis. we should also check to see if any
1702 * of the failed commands are on soft_reset devices, and if so, skip
1703 * the reset.
1704 */
1705
1706 for (channel = 0; channel <= shost->max_channel; channel++) {
1707 if (scsi_host_eh_past_deadline(shost)) {
1708 list_splice_init(&check_list, work_q);
1709 SCSI_LOG_ERROR_RECOVERY(3,
1710 shost_printk(KERN_INFO, shost,
1711 "%s: skip BRST, past eh deadline\n",
1712 current->comm));
1713 return list_empty(work_q);
1714 }
1715
1716 chan_scmd = NULL;
1717 list_for_each_entry(scmd, work_q, eh_entry) {
1718 if (channel == scmd_channel(scmd)) {
1719 chan_scmd = scmd;
1720 break;
1721 /*
1722 * FIXME add back in some support for
1723 * soft_reset devices.
1724 */
1725 }
1726 }
1727
1728 if (!chan_scmd)
1729 continue;
1730 SCSI_LOG_ERROR_RECOVERY(3,
1731 shost_printk(KERN_INFO, shost,
1732 "%s: Sending BRST chan: %d\n",
1733 current->comm, channel));
1734 rtn = scsi_try_bus_reset(chan_scmd);
1735 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1736 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1737 if (channel == scmd_channel(scmd)) {
1738 if (rtn == FAST_IO_FAIL)
1739 scsi_eh_finish_cmd(scmd,
1740 done_q);
1741 else
1742 list_move_tail(&scmd->eh_entry,
1743 &check_list);
1744 }
1745 }
1746 } else {
1747 SCSI_LOG_ERROR_RECOVERY(3,
1748 shost_printk(KERN_INFO, shost,
1749 "%s: BRST failed chan: %d\n",
1750 current->comm, channel));
1751 }
1752 }
1753 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1754}
1755
1756/**
1757 * scsi_eh_host_reset - send a host reset
1758 * @shost: host to be reset.
1759 * @work_q: &list_head for pending commands.
1760 * @done_q: &list_head for processed commands.
1761 */
1762static int scsi_eh_host_reset(struct Scsi_Host *shost,
1763 struct list_head *work_q,
1764 struct list_head *done_q)
1765{
1766 struct scsi_cmnd *scmd, *next;
1767 LIST_HEAD(check_list);
1768 enum scsi_disposition rtn;
1769
1770 if (!list_empty(work_q)) {
1771 scmd = list_entry(work_q->next,
1772 struct scsi_cmnd, eh_entry);
1773
1774 SCSI_LOG_ERROR_RECOVERY(3,
1775 shost_printk(KERN_INFO, shost,
1776 "%s: Sending HRST\n",
1777 current->comm));
1778
1779 rtn = scsi_try_host_reset(scmd);
1780 if (rtn == SUCCESS) {
1781 list_splice_init(work_q, &check_list);
1782 } else if (rtn == FAST_IO_FAIL) {
1783 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1784 scsi_eh_finish_cmd(scmd, done_q);
1785 }
1786 } else {
1787 SCSI_LOG_ERROR_RECOVERY(3,
1788 shost_printk(KERN_INFO, shost,
1789 "%s: HRST failed\n",
1790 current->comm));
1791 }
1792 }
1793 return scsi_eh_test_devices(&check_list, work_q, done_q, 1);
1794}
1795
1796/**
1797 * scsi_eh_offline_sdevs - offline scsi devices that fail to recover
1798 * @work_q: &list_head for pending commands.
1799 * @done_q: &list_head for processed commands.
1800 */
1801static void scsi_eh_offline_sdevs(struct list_head *work_q,
1802 struct list_head *done_q)
1803{
1804 struct scsi_cmnd *scmd, *next;
1805 struct scsi_device *sdev;
1806
1807 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1808 sdev_printk(KERN_INFO, scmd->device, "Device offlined - "
1809 "not ready after error recovery\n");
1810 sdev = scmd->device;
1811
1812 mutex_lock(&sdev->state_mutex);
1813 scsi_device_set_state(sdev, SDEV_OFFLINE);
1814 mutex_unlock(&sdev->state_mutex);
1815
1816 scsi_eh_finish_cmd(scmd, done_q);
1817 }
1818 return;
1819}
1820
1821/**
1822 * scsi_noretry_cmd - determine if command should be failed fast
1823 * @scmd: SCSI cmd to examine.
1824 */
1825bool scsi_noretry_cmd(struct scsi_cmnd *scmd)
1826{
1827 struct request *req = scsi_cmd_to_rq(scmd);
1828
1829 switch (host_byte(scmd->result)) {
1830 case DID_OK:
1831 break;
1832 case DID_TIME_OUT:
1833 goto check_type;
1834 case DID_BUS_BUSY:
1835 return !!(req->cmd_flags & REQ_FAILFAST_TRANSPORT);
1836 case DID_PARITY:
1837 return !!(req->cmd_flags & REQ_FAILFAST_DEV);
1838 case DID_ERROR:
1839 if (get_status_byte(scmd) == SAM_STAT_RESERVATION_CONFLICT)
1840 return false;
1841 fallthrough;
1842 case DID_SOFT_ERROR:
1843 return !!(req->cmd_flags & REQ_FAILFAST_DRIVER);
1844 }
1845
1846 /* Never retry commands aborted due to a duration limit timeout */
1847 if (scsi_ml_byte(scmd->result) == SCSIML_STAT_DL_TIMEOUT)
1848 return true;
1849
1850 if (!scsi_status_is_check_condition(scmd->result))
1851 return false;
1852
1853check_type:
1854 /*
1855 * assume caller has checked sense and determined
1856 * the check condition was retryable.
1857 */
1858 if (req->cmd_flags & REQ_FAILFAST_DEV || blk_rq_is_passthrough(req))
1859 return true;
1860
1861 return false;
1862}
1863
1864/**
1865 * scsi_decide_disposition - Disposition a cmd on return from LLD.
1866 * @scmd: SCSI cmd to examine.
1867 *
1868 * Notes:
1869 * This is *only* called when we are examining the status after sending
1870 * out the actual data command. any commands that are queued for error
1871 * recovery (e.g. test_unit_ready) do *not* come through here.
1872 *
1873 * When this routine returns failed, it means the error handler thread
1874 * is woken. In cases where the error code indicates an error that
1875 * doesn't require the error handler read (i.e. we don't need to
1876 * abort/reset), this function should return SUCCESS.
1877 */
1878enum scsi_disposition scsi_decide_disposition(struct scsi_cmnd *scmd)
1879{
1880 enum scsi_disposition rtn;
1881
1882 /*
1883 * if the device is offline, then we clearly just pass the result back
1884 * up to the top level.
1885 */
1886 if (!scsi_device_online(scmd->device)) {
1887 SCSI_LOG_ERROR_RECOVERY(5, scmd_printk(KERN_INFO, scmd,
1888 "%s: device offline - report as SUCCESS\n", __func__));
1889 return SUCCESS;
1890 }
1891
1892 /*
1893 * first check the host byte, to see if there is anything in there
1894 * that would indicate what we need to do.
1895 */
1896 switch (host_byte(scmd->result)) {
1897 case DID_PASSTHROUGH:
1898 /*
1899 * no matter what, pass this through to the upper layer.
1900 * nuke this special code so that it looks like we are saying
1901 * did_ok.
1902 */
1903 scmd->result &= 0xff00ffff;
1904 return SUCCESS;
1905 case DID_OK:
1906 /*
1907 * looks good. drop through, and check the next byte.
1908 */
1909 break;
1910 case DID_ABORT:
1911 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
1912 set_host_byte(scmd, DID_TIME_OUT);
1913 return SUCCESS;
1914 }
1915 fallthrough;
1916 case DID_NO_CONNECT:
1917 case DID_BAD_TARGET:
1918 /*
1919 * note - this means that we just report the status back
1920 * to the top level driver, not that we actually think
1921 * that it indicates SUCCESS.
1922 */
1923 return SUCCESS;
1924 case DID_SOFT_ERROR:
1925 /*
1926 * when the low level driver returns did_soft_error,
1927 * it is responsible for keeping an internal retry counter
1928 * in order to avoid endless loops (db)
1929 */
1930 goto maybe_retry;
1931 case DID_IMM_RETRY:
1932 return NEEDS_RETRY;
1933
1934 case DID_REQUEUE:
1935 return ADD_TO_MLQUEUE;
1936 case DID_TRANSPORT_DISRUPTED:
1937 /*
1938 * LLD/transport was disrupted during processing of the IO.
1939 * The transport class is now blocked/blocking,
1940 * and the transport will decide what to do with the IO
1941 * based on its timers and recovery capablilities if
1942 * there are enough retries.
1943 */
1944 goto maybe_retry;
1945 case DID_TRANSPORT_FAILFAST:
1946 /*
1947 * The transport decided to failfast the IO (most likely
1948 * the fast io fail tmo fired), so send IO directly upwards.
1949 */
1950 return SUCCESS;
1951 case DID_TRANSPORT_MARGINAL:
1952 /*
1953 * caller has decided not to do retries on
1954 * abort success, so send IO directly upwards
1955 */
1956 return SUCCESS;
1957 case DID_ERROR:
1958 if (get_status_byte(scmd) == SAM_STAT_RESERVATION_CONFLICT)
1959 /*
1960 * execute reservation conflict processing code
1961 * lower down
1962 */
1963 break;
1964 fallthrough;
1965 case DID_BUS_BUSY:
1966 case DID_PARITY:
1967 goto maybe_retry;
1968 case DID_TIME_OUT:
1969 /*
1970 * when we scan the bus, we get timeout messages for
1971 * these commands if there is no device available.
1972 * other hosts report did_no_connect for the same thing.
1973 */
1974 if ((scmd->cmnd[0] == TEST_UNIT_READY ||
1975 scmd->cmnd[0] == INQUIRY)) {
1976 return SUCCESS;
1977 } else {
1978 return FAILED;
1979 }
1980 case DID_RESET:
1981 return SUCCESS;
1982 default:
1983 return FAILED;
1984 }
1985
1986 /*
1987 * check the status byte to see if this indicates anything special.
1988 */
1989 switch (get_status_byte(scmd)) {
1990 case SAM_STAT_TASK_SET_FULL:
1991 scsi_handle_queue_full(scmd->device);
1992 /*
1993 * the case of trying to send too many commands to a
1994 * tagged queueing device.
1995 */
1996 fallthrough;
1997 case SAM_STAT_BUSY:
1998 /*
1999 * device can't talk to us at the moment. Should only
2000 * occur (SAM-3) when the task queue is empty, so will cause
2001 * the empty queue handling to trigger a stall in the
2002 * device.
2003 */
2004 return ADD_TO_MLQUEUE;
2005 case SAM_STAT_GOOD:
2006 if (scmd->cmnd[0] == REPORT_LUNS)
2007 scmd->device->sdev_target->expecting_lun_change = 0;
2008 scsi_handle_queue_ramp_up(scmd->device);
2009 if (scmd->sense_buffer && SCSI_SENSE_VALID(scmd))
2010 /*
2011 * If we have sense data, call scsi_check_sense() in
2012 * order to set the correct SCSI ML byte (if any).
2013 * No point in checking the return value, since the
2014 * command has already completed successfully.
2015 */
2016 scsi_check_sense(scmd);
2017 fallthrough;
2018 case SAM_STAT_COMMAND_TERMINATED:
2019 return SUCCESS;
2020 case SAM_STAT_TASK_ABORTED:
2021 goto maybe_retry;
2022 case SAM_STAT_CHECK_CONDITION:
2023 rtn = scsi_check_sense(scmd);
2024 if (rtn == NEEDS_RETRY)
2025 goto maybe_retry;
2026 /* if rtn == FAILED, we have no sense information;
2027 * returning FAILED will wake the error handler thread
2028 * to collect the sense and redo the decide
2029 * disposition */
2030 return rtn;
2031 case SAM_STAT_CONDITION_MET:
2032 case SAM_STAT_INTERMEDIATE:
2033 case SAM_STAT_INTERMEDIATE_CONDITION_MET:
2034 case SAM_STAT_ACA_ACTIVE:
2035 /*
2036 * who knows? FIXME(eric)
2037 */
2038 return SUCCESS;
2039
2040 case SAM_STAT_RESERVATION_CONFLICT:
2041 sdev_printk(KERN_INFO, scmd->device,
2042 "reservation conflict\n");
2043 set_scsi_ml_byte(scmd, SCSIML_STAT_RESV_CONFLICT);
2044 return SUCCESS; /* causes immediate i/o error */
2045 }
2046 return FAILED;
2047
2048maybe_retry:
2049
2050 /* we requeue for retry because the error was retryable, and
2051 * the request was not marked fast fail. Note that above,
2052 * even if the request is marked fast fail, we still requeue
2053 * for queue congestion conditions (QUEUE_FULL or BUSY) */
2054 if (scsi_cmd_retry_allowed(scmd) && !scsi_noretry_cmd(scmd)) {
2055 return NEEDS_RETRY;
2056 } else {
2057 /*
2058 * no more retries - report this one back to upper level.
2059 */
2060 return SUCCESS;
2061 }
2062}
2063
2064static enum rq_end_io_ret eh_lock_door_done(struct request *req,
2065 blk_status_t status)
2066{
2067 blk_mq_free_request(req);
2068 return RQ_END_IO_NONE;
2069}
2070
2071/**
2072 * scsi_eh_lock_door - Prevent medium removal for the specified device
2073 * @sdev: SCSI device to prevent medium removal
2074 *
2075 * Locking:
2076 * We must be called from process context.
2077 *
2078 * Notes:
2079 * We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
2080 * head of the devices request queue, and continue.
2081 */
2082static void scsi_eh_lock_door(struct scsi_device *sdev)
2083{
2084 struct scsi_cmnd *scmd;
2085 struct request *req;
2086
2087 req = scsi_alloc_request(sdev->request_queue, REQ_OP_DRV_IN, 0);
2088 if (IS_ERR(req))
2089 return;
2090 scmd = blk_mq_rq_to_pdu(req);
2091
2092 scmd->cmnd[0] = ALLOW_MEDIUM_REMOVAL;
2093 scmd->cmnd[1] = 0;
2094 scmd->cmnd[2] = 0;
2095 scmd->cmnd[3] = 0;
2096 scmd->cmnd[4] = SCSI_REMOVAL_PREVENT;
2097 scmd->cmnd[5] = 0;
2098 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
2099 scmd->allowed = 5;
2100
2101 req->rq_flags |= RQF_QUIET;
2102 req->timeout = 10 * HZ;
2103 req->end_io = eh_lock_door_done;
2104
2105 blk_execute_rq_nowait(req, true);
2106}
2107
2108/**
2109 * scsi_restart_operations - restart io operations to the specified host.
2110 * @shost: Host we are restarting.
2111 *
2112 * Notes:
2113 * When we entered the error handler, we blocked all further i/o to
2114 * this device. we need to 'reverse' this process.
2115 */
2116static void scsi_restart_operations(struct Scsi_Host *shost)
2117{
2118 struct scsi_device *sdev;
2119 unsigned long flags;
2120
2121 /*
2122 * If the door was locked, we need to insert a door lock request
2123 * onto the head of the SCSI request queue for the device. There
2124 * is no point trying to lock the door of an off-line device.
2125 */
2126 shost_for_each_device(sdev, shost) {
2127 if (scsi_device_online(sdev) && sdev->was_reset && sdev->locked) {
2128 scsi_eh_lock_door(sdev);
2129 sdev->was_reset = 0;
2130 }
2131 }
2132
2133 /*
2134 * next free up anything directly waiting upon the host. this
2135 * will be requests for character device operations, and also for
2136 * ioctls to queued block devices.
2137 */
2138 SCSI_LOG_ERROR_RECOVERY(3,
2139 shost_printk(KERN_INFO, shost, "waking up host to restart\n"));
2140
2141 spin_lock_irqsave(shost->host_lock, flags);
2142 if (scsi_host_set_state(shost, SHOST_RUNNING))
2143 if (scsi_host_set_state(shost, SHOST_CANCEL))
2144 BUG_ON(scsi_host_set_state(shost, SHOST_DEL));
2145 spin_unlock_irqrestore(shost->host_lock, flags);
2146
2147 wake_up(&shost->host_wait);
2148
2149 /*
2150 * finally we need to re-initiate requests that may be pending. we will
2151 * have had everything blocked while error handling is taking place, and
2152 * now that error recovery is done, we will need to ensure that these
2153 * requests are started.
2154 */
2155 scsi_run_host_queues(shost);
2156
2157 /*
2158 * if eh is active and host_eh_scheduled is pending we need to re-run
2159 * recovery. we do this check after scsi_run_host_queues() to allow
2160 * everything pent up since the last eh run a chance to make forward
2161 * progress before we sync again. Either we'll immediately re-run
2162 * recovery or scsi_device_unbusy() will wake us again when these
2163 * pending commands complete.
2164 */
2165 spin_lock_irqsave(shost->host_lock, flags);
2166 if (shost->host_eh_scheduled)
2167 if (scsi_host_set_state(shost, SHOST_RECOVERY))
2168 WARN_ON(scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY));
2169 spin_unlock_irqrestore(shost->host_lock, flags);
2170}
2171
2172/**
2173 * scsi_eh_ready_devs - check device ready state and recover if not.
2174 * @shost: host to be recovered.
2175 * @work_q: &list_head for pending commands.
2176 * @done_q: &list_head for processed commands.
2177 */
2178void scsi_eh_ready_devs(struct Scsi_Host *shost,
2179 struct list_head *work_q,
2180 struct list_head *done_q)
2181{
2182 if (!scsi_eh_stu(shost, work_q, done_q))
2183 if (!scsi_eh_bus_device_reset(shost, work_q, done_q))
2184 if (!scsi_eh_target_reset(shost, work_q, done_q))
2185 if (!scsi_eh_bus_reset(shost, work_q, done_q))
2186 if (!scsi_eh_host_reset(shost, work_q, done_q))
2187 scsi_eh_offline_sdevs(work_q,
2188 done_q);
2189}
2190EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
2191
2192/**
2193 * scsi_eh_flush_done_q - finish processed commands or retry them.
2194 * @done_q: list_head of processed commands.
2195 */
2196void scsi_eh_flush_done_q(struct list_head *done_q)
2197{
2198 struct scsi_cmnd *scmd, *next;
2199
2200 list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
2201 struct scsi_device *sdev = scmd->device;
2202
2203 list_del_init(&scmd->eh_entry);
2204 if (scsi_device_online(sdev) && !scsi_noretry_cmd(scmd) &&
2205 scsi_cmd_retry_allowed(scmd) &&
2206 scsi_eh_should_retry_cmd(scmd)) {
2207 SCSI_LOG_ERROR_RECOVERY(3,
2208 scmd_printk(KERN_INFO, scmd,
2209 "%s: flush retry cmd\n",
2210 current->comm));
2211 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
2212 blk_mq_kick_requeue_list(sdev->request_queue);
2213 } else {
2214 /*
2215 * If just we got sense for the device (called
2216 * scsi_eh_get_sense), scmd->result is already
2217 * set, do not set DID_TIME_OUT.
2218 */
2219 if (!scmd->result &&
2220 !(scmd->flags & SCMD_FORCE_EH_SUCCESS))
2221 scmd->result |= (DID_TIME_OUT << 16);
2222 SCSI_LOG_ERROR_RECOVERY(3,
2223 scmd_printk(KERN_INFO, scmd,
2224 "%s: flush finish cmd\n",
2225 current->comm));
2226 scsi_finish_command(scmd);
2227 }
2228 }
2229}
2230EXPORT_SYMBOL(scsi_eh_flush_done_q);
2231
2232/**
2233 * scsi_unjam_host - Attempt to fix a host which has a cmd that failed.
2234 * @shost: Host to unjam.
2235 *
2236 * Notes:
2237 * When we come in here, we *know* that all commands on the bus have
2238 * either completed, failed or timed out. we also know that no further
2239 * commands are being sent to the host, so things are relatively quiet
2240 * and we have freedom to fiddle with things as we wish.
2241 *
2242 * This is only the *default* implementation. it is possible for
2243 * individual drivers to supply their own version of this function, and
2244 * if the maintainer wishes to do this, it is strongly suggested that
2245 * this function be taken as a template and modified. this function
2246 * was designed to correctly handle problems for about 95% of the
2247 * different cases out there, and it should always provide at least a
2248 * reasonable amount of error recovery.
2249 *
2250 * Any command marked 'failed' or 'timeout' must eventually have
2251 * scsi_finish_cmd() called for it. we do all of the retry stuff
2252 * here, so when we restart the host after we return it should have an
2253 * empty queue.
2254 */
2255static void scsi_unjam_host(struct Scsi_Host *shost)
2256{
2257 unsigned long flags;
2258 LIST_HEAD(eh_work_q);
2259 LIST_HEAD(eh_done_q);
2260
2261 spin_lock_irqsave(shost->host_lock, flags);
2262 list_splice_init(&shost->eh_cmd_q, &eh_work_q);
2263 spin_unlock_irqrestore(shost->host_lock, flags);
2264
2265 SCSI_LOG_ERROR_RECOVERY(1, scsi_eh_prt_fail_stats(shost, &eh_work_q));
2266
2267 if (!scsi_eh_get_sense(&eh_work_q, &eh_done_q))
2268 scsi_eh_ready_devs(shost, &eh_work_q, &eh_done_q);
2269
2270 spin_lock_irqsave(shost->host_lock, flags);
2271 if (shost->eh_deadline != -1)
2272 shost->last_reset = 0;
2273 spin_unlock_irqrestore(shost->host_lock, flags);
2274 scsi_eh_flush_done_q(&eh_done_q);
2275}
2276
2277/**
2278 * scsi_error_handler - SCSI error handler thread
2279 * @data: Host for which we are running.
2280 *
2281 * Notes:
2282 * This is the main error handling loop. This is run as a kernel thread
2283 * for every SCSI host and handles all error handling activity.
2284 */
2285int scsi_error_handler(void *data)
2286{
2287 struct Scsi_Host *shost = data;
2288
2289 /*
2290 * We use TASK_INTERRUPTIBLE so that the thread is not
2291 * counted against the load average as a running process.
2292 * We never actually get interrupted because kthread_run
2293 * disables signal delivery for the created thread.
2294 */
2295 while (true) {
2296 /*
2297 * The sequence in kthread_stop() sets the stop flag first
2298 * then wakes the process. To avoid missed wakeups, the task
2299 * should always be in a non running state before the stop
2300 * flag is checked
2301 */
2302 set_current_state(TASK_INTERRUPTIBLE);
2303 if (kthread_should_stop())
2304 break;
2305
2306 if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) ||
2307 shost->host_failed != scsi_host_busy(shost)) {
2308 SCSI_LOG_ERROR_RECOVERY(1,
2309 shost_printk(KERN_INFO, shost,
2310 "scsi_eh_%d: sleeping\n",
2311 shost->host_no));
2312 schedule();
2313 continue;
2314 }
2315
2316 __set_current_state(TASK_RUNNING);
2317 SCSI_LOG_ERROR_RECOVERY(1,
2318 shost_printk(KERN_INFO, shost,
2319 "scsi_eh_%d: waking up %d/%d/%d\n",
2320 shost->host_no, shost->host_eh_scheduled,
2321 shost->host_failed,
2322 scsi_host_busy(shost)));
2323
2324 /*
2325 * We have a host that is failing for some reason. Figure out
2326 * what we need to do to get it up and online again (if we can).
2327 * If we fail, we end up taking the thing offline.
2328 */
2329 if (!shost->eh_noresume && scsi_autopm_get_host(shost) != 0) {
2330 SCSI_LOG_ERROR_RECOVERY(1,
2331 shost_printk(KERN_ERR, shost,
2332 "scsi_eh_%d: unable to autoresume\n",
2333 shost->host_no));
2334 continue;
2335 }
2336
2337 if (shost->transportt->eh_strategy_handler)
2338 shost->transportt->eh_strategy_handler(shost);
2339 else
2340 scsi_unjam_host(shost);
2341
2342 /* All scmds have been handled */
2343 shost->host_failed = 0;
2344
2345 /*
2346 * Note - if the above fails completely, the action is to take
2347 * individual devices offline and flush the queue of any
2348 * outstanding requests that may have been pending. When we
2349 * restart, we restart any I/O to any other devices on the bus
2350 * which are still online.
2351 */
2352 scsi_restart_operations(shost);
2353 if (!shost->eh_noresume)
2354 scsi_autopm_put_host(shost);
2355 }
2356 __set_current_state(TASK_RUNNING);
2357
2358 SCSI_LOG_ERROR_RECOVERY(1,
2359 shost_printk(KERN_INFO, shost,
2360 "Error handler scsi_eh_%d exiting\n",
2361 shost->host_no));
2362 shost->ehandler = NULL;
2363 return 0;
2364}
2365
2366/*
2367 * Function: scsi_report_bus_reset()
2368 *
2369 * Purpose: Utility function used by low-level drivers to report that
2370 * they have observed a bus reset on the bus being handled.
2371 *
2372 * Arguments: shost - Host in question
2373 * channel - channel on which reset was observed.
2374 *
2375 * Returns: Nothing
2376 *
2377 * Lock status: Host lock must be held.
2378 *
2379 * Notes: This only needs to be called if the reset is one which
2380 * originates from an unknown location. Resets originated
2381 * by the mid-level itself don't need to call this, but there
2382 * should be no harm.
2383 *
2384 * The main purpose of this is to make sure that a CHECK_CONDITION
2385 * is properly treated.
2386 */
2387void scsi_report_bus_reset(struct Scsi_Host *shost, int channel)
2388{
2389 struct scsi_device *sdev;
2390
2391 __shost_for_each_device(sdev, shost) {
2392 if (channel == sdev_channel(sdev))
2393 __scsi_report_device_reset(sdev, NULL);
2394 }
2395}
2396EXPORT_SYMBOL(scsi_report_bus_reset);
2397
2398/*
2399 * Function: scsi_report_device_reset()
2400 *
2401 * Purpose: Utility function used by low-level drivers to report that
2402 * they have observed a device reset on the device being handled.
2403 *
2404 * Arguments: shost - Host in question
2405 * channel - channel on which reset was observed
2406 * target - target on which reset was observed
2407 *
2408 * Returns: Nothing
2409 *
2410 * Lock status: Host lock must be held
2411 *
2412 * Notes: This only needs to be called if the reset is one which
2413 * originates from an unknown location. Resets originated
2414 * by the mid-level itself don't need to call this, but there
2415 * should be no harm.
2416 *
2417 * The main purpose of this is to make sure that a CHECK_CONDITION
2418 * is properly treated.
2419 */
2420void scsi_report_device_reset(struct Scsi_Host *shost, int channel, int target)
2421{
2422 struct scsi_device *sdev;
2423
2424 __shost_for_each_device(sdev, shost) {
2425 if (channel == sdev_channel(sdev) &&
2426 target == sdev_id(sdev))
2427 __scsi_report_device_reset(sdev, NULL);
2428 }
2429}
2430EXPORT_SYMBOL(scsi_report_device_reset);
2431
2432/**
2433 * scsi_ioctl_reset: explicitly reset a host/bus/target/device
2434 * @dev: scsi_device to operate on
2435 * @arg: reset type (see sg.h)
2436 */
2437int
2438scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
2439{
2440 struct scsi_cmnd *scmd;
2441 struct Scsi_Host *shost = dev->host;
2442 struct request *rq;
2443 unsigned long flags;
2444 int error = 0, val;
2445 enum scsi_disposition rtn;
2446
2447 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
2448 return -EACCES;
2449
2450 error = get_user(val, arg);
2451 if (error)
2452 return error;
2453
2454 if (scsi_autopm_get_host(shost) < 0)
2455 return -EIO;
2456
2457 error = -EIO;
2458 rq = kzalloc(sizeof(struct request) + sizeof(struct scsi_cmnd) +
2459 shost->hostt->cmd_size, GFP_KERNEL);
2460 if (!rq)
2461 goto out_put_autopm_host;
2462 blk_rq_init(NULL, rq);
2463
2464 scmd = (struct scsi_cmnd *)(rq + 1);
2465 scsi_init_command(dev, scmd);
2466
2467 scmd->submitter = SUBMITTED_BY_SCSI_RESET_IOCTL;
2468 scmd->flags |= SCMD_LAST;
2469 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
2470
2471 scmd->cmd_len = 0;
2472
2473 scmd->sc_data_direction = DMA_BIDIRECTIONAL;
2474
2475 spin_lock_irqsave(shost->host_lock, flags);
2476 shost->tmf_in_progress = 1;
2477 spin_unlock_irqrestore(shost->host_lock, flags);
2478
2479 switch (val & ~SG_SCSI_RESET_NO_ESCALATE) {
2480 case SG_SCSI_RESET_NOTHING:
2481 rtn = SUCCESS;
2482 break;
2483 case SG_SCSI_RESET_DEVICE:
2484 rtn = scsi_try_bus_device_reset(scmd);
2485 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2486 break;
2487 fallthrough;
2488 case SG_SCSI_RESET_TARGET:
2489 rtn = scsi_try_target_reset(scmd);
2490 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2491 break;
2492 fallthrough;
2493 case SG_SCSI_RESET_BUS:
2494 rtn = scsi_try_bus_reset(scmd);
2495 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2496 break;
2497 fallthrough;
2498 case SG_SCSI_RESET_HOST:
2499 rtn = scsi_try_host_reset(scmd);
2500 if (rtn == SUCCESS)
2501 break;
2502 fallthrough;
2503 default:
2504 rtn = FAILED;
2505 break;
2506 }
2507
2508 error = (rtn == SUCCESS) ? 0 : -EIO;
2509
2510 spin_lock_irqsave(shost->host_lock, flags);
2511 shost->tmf_in_progress = 0;
2512 spin_unlock_irqrestore(shost->host_lock, flags);
2513
2514 /*
2515 * be sure to wake up anyone who was sleeping or had their queue
2516 * suspended while we performed the TMF.
2517 */
2518 SCSI_LOG_ERROR_RECOVERY(3,
2519 shost_printk(KERN_INFO, shost,
2520 "waking up host to restart after TMF\n"));
2521
2522 wake_up(&shost->host_wait);
2523 scsi_run_host_queues(shost);
2524
2525 kfree(rq);
2526
2527out_put_autopm_host:
2528 scsi_autopm_put_host(shost);
2529 return error;
2530}
2531
2532bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
2533 struct scsi_sense_hdr *sshdr)
2534{
2535 return scsi_normalize_sense(cmd->sense_buffer,
2536 SCSI_SENSE_BUFFERSIZE, sshdr);
2537}
2538EXPORT_SYMBOL(scsi_command_normalize_sense);
2539
2540/**
2541 * scsi_get_sense_info_fld - get information field from sense data (either fixed or descriptor format)
2542 * @sense_buffer: byte array of sense data
2543 * @sb_len: number of valid bytes in sense_buffer
2544 * @info_out: pointer to 64 integer where 8 or 4 byte information
2545 * field will be placed if found.
2546 *
2547 * Return value:
2548 * true if information field found, false if not found.
2549 */
2550bool scsi_get_sense_info_fld(const u8 *sense_buffer, int sb_len,
2551 u64 *info_out)
2552{
2553 const u8 * ucp;
2554
2555 if (sb_len < 7)
2556 return false;
2557 switch (sense_buffer[0] & 0x7f) {
2558 case 0x70:
2559 case 0x71:
2560 if (sense_buffer[0] & 0x80) {
2561 *info_out = get_unaligned_be32(&sense_buffer[3]);
2562 return true;
2563 }
2564 return false;
2565 case 0x72:
2566 case 0x73:
2567 ucp = scsi_sense_desc_find(sense_buffer, sb_len,
2568 0 /* info desc */);
2569 if (ucp && (0xa == ucp[1])) {
2570 *info_out = get_unaligned_be64(&ucp[4]);
2571 return true;
2572 }
2573 return false;
2574 default:
2575 return false;
2576 }
2577}
2578EXPORT_SYMBOL(scsi_get_sense_info_fld);
1/*
2 * scsi_error.c Copyright (C) 1997 Eric Youngdale
3 *
4 * SCSI error/timeout handling
5 * Initial versions: Eric Youngdale. Based upon conversations with
6 * Leonard Zubkoff and David Miller at Linux Expo,
7 * ideas originating from all over the place.
8 *
9 * Restructured scsi_unjam_host and associated functions.
10 * September 04, 2002 Mike Anderson (andmike@us.ibm.com)
11 *
12 * Forward port of Russell King's (rmk@arm.linux.org.uk) changes and
13 * minor cleanups.
14 * September 30, 2002 Mike Anderson (andmike@us.ibm.com)
15 */
16
17#include <linux/module.h>
18#include <linux/sched.h>
19#include <linux/gfp.h>
20#include <linux/timer.h>
21#include <linux/string.h>
22#include <linux/kernel.h>
23#include <linux/freezer.h>
24#include <linux/kthread.h>
25#include <linux/interrupt.h>
26#include <linux/blkdev.h>
27#include <linux/delay.h>
28#include <linux/jiffies.h>
29
30#include <scsi/scsi.h>
31#include <scsi/scsi_cmnd.h>
32#include <scsi/scsi_dbg.h>
33#include <scsi/scsi_device.h>
34#include <scsi/scsi_driver.h>
35#include <scsi/scsi_eh.h>
36#include <scsi/scsi_common.h>
37#include <scsi/scsi_transport.h>
38#include <scsi/scsi_host.h>
39#include <scsi/scsi_ioctl.h>
40#include <scsi/scsi_dh.h>
41#include <scsi/sg.h>
42
43#include "scsi_priv.h"
44#include "scsi_logging.h"
45#include "scsi_transport_api.h"
46
47#include <trace/events/scsi.h>
48
49#include <asm/unaligned.h>
50
51static void scsi_eh_done(struct scsi_cmnd *scmd);
52
53/*
54 * These should *probably* be handled by the host itself.
55 * Since it is allowed to sleep, it probably should.
56 */
57#define BUS_RESET_SETTLE_TIME (10)
58#define HOST_RESET_SETTLE_TIME (10)
59
60static int scsi_eh_try_stu(struct scsi_cmnd *scmd);
61static int scsi_try_to_abort_cmd(struct scsi_host_template *,
62 struct scsi_cmnd *);
63
64void scsi_eh_wakeup(struct Scsi_Host *shost)
65{
66 lockdep_assert_held(shost->host_lock);
67
68 if (atomic_read(&shost->host_busy) == shost->host_failed) {
69 trace_scsi_eh_wakeup(shost);
70 wake_up_process(shost->ehandler);
71 SCSI_LOG_ERROR_RECOVERY(5, shost_printk(KERN_INFO, shost,
72 "Waking error handler thread\n"));
73 }
74}
75
76/**
77 * scsi_schedule_eh - schedule EH for SCSI host
78 * @shost: SCSI host to invoke error handling on.
79 *
80 * Schedule SCSI EH without scmd.
81 */
82void scsi_schedule_eh(struct Scsi_Host *shost)
83{
84 unsigned long flags;
85
86 spin_lock_irqsave(shost->host_lock, flags);
87
88 if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 ||
89 scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) {
90 shost->host_eh_scheduled++;
91 scsi_eh_wakeup(shost);
92 }
93
94 spin_unlock_irqrestore(shost->host_lock, flags);
95}
96EXPORT_SYMBOL_GPL(scsi_schedule_eh);
97
98static int scsi_host_eh_past_deadline(struct Scsi_Host *shost)
99{
100 if (!shost->last_reset || shost->eh_deadline == -1)
101 return 0;
102
103 /*
104 * 32bit accesses are guaranteed to be atomic
105 * (on all supported architectures), so instead
106 * of using a spinlock we can as well double check
107 * if eh_deadline has been set to 'off' during the
108 * time_before call.
109 */
110 if (time_before(jiffies, shost->last_reset + shost->eh_deadline) &&
111 shost->eh_deadline > -1)
112 return 0;
113
114 return 1;
115}
116
117/**
118 * scmd_eh_abort_handler - Handle command aborts
119 * @work: command to be aborted.
120 *
121 * Note: this function must be called only for a command that has timed out.
122 * Because the block layer marks a request as complete before it calls
123 * scsi_times_out(), a .scsi_done() call from the LLD for a command that has
124 * timed out do not have any effect. Hence it is safe to call
125 * scsi_finish_command() from this function.
126 */
127void
128scmd_eh_abort_handler(struct work_struct *work)
129{
130 struct scsi_cmnd *scmd =
131 container_of(work, struct scsi_cmnd, abort_work.work);
132 struct scsi_device *sdev = scmd->device;
133 int rtn;
134
135 if (scsi_host_eh_past_deadline(sdev->host)) {
136 SCSI_LOG_ERROR_RECOVERY(3,
137 scmd_printk(KERN_INFO, scmd,
138 "eh timeout, not aborting\n"));
139 } else {
140 SCSI_LOG_ERROR_RECOVERY(3,
141 scmd_printk(KERN_INFO, scmd,
142 "aborting command\n"));
143 rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd);
144 if (rtn == SUCCESS) {
145 set_host_byte(scmd, DID_TIME_OUT);
146 if (scsi_host_eh_past_deadline(sdev->host)) {
147 SCSI_LOG_ERROR_RECOVERY(3,
148 scmd_printk(KERN_INFO, scmd,
149 "eh timeout, not retrying "
150 "aborted command\n"));
151 } else if (!scsi_noretry_cmd(scmd) &&
152 (++scmd->retries <= scmd->allowed)) {
153 SCSI_LOG_ERROR_RECOVERY(3,
154 scmd_printk(KERN_WARNING, scmd,
155 "retry aborted command\n"));
156 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
157 return;
158 } else {
159 SCSI_LOG_ERROR_RECOVERY(3,
160 scmd_printk(KERN_WARNING, scmd,
161 "finish aborted command\n"));
162 scsi_finish_command(scmd);
163 return;
164 }
165 } else {
166 SCSI_LOG_ERROR_RECOVERY(3,
167 scmd_printk(KERN_INFO, scmd,
168 "cmd abort %s\n",
169 (rtn == FAST_IO_FAIL) ?
170 "not send" : "failed"));
171 }
172 }
173
174 scsi_eh_scmd_add(scmd);
175}
176
177/**
178 * scsi_abort_command - schedule a command abort
179 * @scmd: scmd to abort.
180 *
181 * We only need to abort commands after a command timeout
182 */
183static int
184scsi_abort_command(struct scsi_cmnd *scmd)
185{
186 struct scsi_device *sdev = scmd->device;
187 struct Scsi_Host *shost = sdev->host;
188 unsigned long flags;
189
190 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
191 /*
192 * Retry after abort failed, escalate to next level.
193 */
194 SCSI_LOG_ERROR_RECOVERY(3,
195 scmd_printk(KERN_INFO, scmd,
196 "previous abort failed\n"));
197 BUG_ON(delayed_work_pending(&scmd->abort_work));
198 return FAILED;
199 }
200
201 spin_lock_irqsave(shost->host_lock, flags);
202 if (shost->eh_deadline != -1 && !shost->last_reset)
203 shost->last_reset = jiffies;
204 spin_unlock_irqrestore(shost->host_lock, flags);
205
206 scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED;
207 SCSI_LOG_ERROR_RECOVERY(3,
208 scmd_printk(KERN_INFO, scmd, "abort scheduled\n"));
209 queue_delayed_work(shost->tmf_work_q, &scmd->abort_work, HZ / 100);
210 return SUCCESS;
211}
212
213/**
214 * scsi_eh_reset - call into ->eh_action to reset internal counters
215 * @scmd: scmd to run eh on.
216 *
217 * The scsi driver might be carrying internal state about the
218 * devices, so we need to call into the driver to reset the
219 * internal state once the error handler is started.
220 */
221static void scsi_eh_reset(struct scsi_cmnd *scmd)
222{
223 if (!blk_rq_is_passthrough(scmd->request)) {
224 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
225 if (sdrv->eh_reset)
226 sdrv->eh_reset(scmd);
227 }
228}
229
230static void scsi_eh_inc_host_failed(struct rcu_head *head)
231{
232 struct scsi_cmnd *scmd = container_of(head, typeof(*scmd), rcu);
233 struct Scsi_Host *shost = scmd->device->host;
234 unsigned long flags;
235
236 spin_lock_irqsave(shost->host_lock, flags);
237 shost->host_failed++;
238 scsi_eh_wakeup(shost);
239 spin_unlock_irqrestore(shost->host_lock, flags);
240}
241
242/**
243 * scsi_eh_scmd_add - add scsi cmd to error handling.
244 * @scmd: scmd to run eh on.
245 */
246void scsi_eh_scmd_add(struct scsi_cmnd *scmd)
247{
248 struct Scsi_Host *shost = scmd->device->host;
249 unsigned long flags;
250 int ret;
251
252 WARN_ON_ONCE(!shost->ehandler);
253
254 spin_lock_irqsave(shost->host_lock, flags);
255 if (scsi_host_set_state(shost, SHOST_RECOVERY)) {
256 ret = scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY);
257 WARN_ON_ONCE(ret);
258 }
259 if (shost->eh_deadline != -1 && !shost->last_reset)
260 shost->last_reset = jiffies;
261
262 scsi_eh_reset(scmd);
263 list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
264 spin_unlock_irqrestore(shost->host_lock, flags);
265 /*
266 * Ensure that all tasks observe the host state change before the
267 * host_failed change.
268 */
269 call_rcu(&scmd->rcu, scsi_eh_inc_host_failed);
270}
271
272/**
273 * scsi_times_out - Timeout function for normal scsi commands.
274 * @req: request that is timing out.
275 *
276 * Notes:
277 * We do not need to lock this. There is the potential for a race
278 * only in that the normal completion handling might run, but if the
279 * normal completion function determines that the timer has already
280 * fired, then it mustn't do anything.
281 */
282enum blk_eh_timer_return scsi_times_out(struct request *req)
283{
284 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
285 enum blk_eh_timer_return rtn = BLK_EH_NOT_HANDLED;
286 struct Scsi_Host *host = scmd->device->host;
287
288 trace_scsi_dispatch_cmd_timeout(scmd);
289 scsi_log_completion(scmd, TIMEOUT_ERROR);
290
291 if (host->eh_deadline != -1 && !host->last_reset)
292 host->last_reset = jiffies;
293
294 if (host->hostt->eh_timed_out)
295 rtn = host->hostt->eh_timed_out(scmd);
296
297 if (rtn == BLK_EH_NOT_HANDLED) {
298 if (scsi_abort_command(scmd) != SUCCESS) {
299 set_host_byte(scmd, DID_TIME_OUT);
300 scsi_eh_scmd_add(scmd);
301 }
302 }
303
304 return rtn;
305}
306
307/**
308 * scsi_block_when_processing_errors - Prevent cmds from being queued.
309 * @sdev: Device on which we are performing recovery.
310 *
311 * Description:
312 * We block until the host is out of error recovery, and then check to
313 * see whether the host or the device is offline.
314 *
315 * Return value:
316 * 0 when dev was taken offline by error recovery. 1 OK to proceed.
317 */
318int scsi_block_when_processing_errors(struct scsi_device *sdev)
319{
320 int online;
321
322 wait_event(sdev->host->host_wait, !scsi_host_in_recovery(sdev->host));
323
324 online = scsi_device_online(sdev);
325
326 SCSI_LOG_ERROR_RECOVERY(5, sdev_printk(KERN_INFO, sdev,
327 "%s: rtn: %d\n", __func__, online));
328
329 return online;
330}
331EXPORT_SYMBOL(scsi_block_when_processing_errors);
332
333#ifdef CONFIG_SCSI_LOGGING
334/**
335 * scsi_eh_prt_fail_stats - Log info on failures.
336 * @shost: scsi host being recovered.
337 * @work_q: Queue of scsi cmds to process.
338 */
339static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
340 struct list_head *work_q)
341{
342 struct scsi_cmnd *scmd;
343 struct scsi_device *sdev;
344 int total_failures = 0;
345 int cmd_failed = 0;
346 int cmd_cancel = 0;
347 int devices_failed = 0;
348
349 shost_for_each_device(sdev, shost) {
350 list_for_each_entry(scmd, work_q, eh_entry) {
351 if (scmd->device == sdev) {
352 ++total_failures;
353 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED)
354 ++cmd_cancel;
355 else
356 ++cmd_failed;
357 }
358 }
359
360 if (cmd_cancel || cmd_failed) {
361 SCSI_LOG_ERROR_RECOVERY(3,
362 shost_printk(KERN_INFO, shost,
363 "%s: cmds failed: %d, cancel: %d\n",
364 __func__, cmd_failed,
365 cmd_cancel));
366 cmd_cancel = 0;
367 cmd_failed = 0;
368 ++devices_failed;
369 }
370 }
371
372 SCSI_LOG_ERROR_RECOVERY(2, shost_printk(KERN_INFO, shost,
373 "Total of %d commands on %d"
374 " devices require eh work\n",
375 total_failures, devices_failed));
376}
377#endif
378
379 /**
380 * scsi_report_lun_change - Set flag on all *other* devices on the same target
381 * to indicate that a UNIT ATTENTION is expected.
382 * @sdev: Device reporting the UNIT ATTENTION
383 */
384static void scsi_report_lun_change(struct scsi_device *sdev)
385{
386 sdev->sdev_target->expecting_lun_change = 1;
387}
388
389/**
390 * scsi_report_sense - Examine scsi sense information and log messages for
391 * certain conditions, also issue uevents for some of them.
392 * @sdev: Device reporting the sense code
393 * @sshdr: sshdr to be examined
394 */
395static void scsi_report_sense(struct scsi_device *sdev,
396 struct scsi_sense_hdr *sshdr)
397{
398 enum scsi_device_event evt_type = SDEV_EVT_MAXBITS; /* i.e. none */
399
400 if (sshdr->sense_key == UNIT_ATTENTION) {
401 if (sshdr->asc == 0x3f && sshdr->ascq == 0x03) {
402 evt_type = SDEV_EVT_INQUIRY_CHANGE_REPORTED;
403 sdev_printk(KERN_WARNING, sdev,
404 "Inquiry data has changed");
405 } else if (sshdr->asc == 0x3f && sshdr->ascq == 0x0e) {
406 evt_type = SDEV_EVT_LUN_CHANGE_REPORTED;
407 scsi_report_lun_change(sdev);
408 sdev_printk(KERN_WARNING, sdev,
409 "Warning! Received an indication that the "
410 "LUN assignments on this target have "
411 "changed. The Linux SCSI layer does not "
412 "automatically remap LUN assignments.\n");
413 } else if (sshdr->asc == 0x3f)
414 sdev_printk(KERN_WARNING, sdev,
415 "Warning! Received an indication that the "
416 "operating parameters on this target have "
417 "changed. The Linux SCSI layer does not "
418 "automatically adjust these parameters.\n");
419
420 if (sshdr->asc == 0x38 && sshdr->ascq == 0x07) {
421 evt_type = SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED;
422 sdev_printk(KERN_WARNING, sdev,
423 "Warning! Received an indication that the "
424 "LUN reached a thin provisioning soft "
425 "threshold.\n");
426 }
427
428 if (sshdr->asc == 0x29) {
429 evt_type = SDEV_EVT_POWER_ON_RESET_OCCURRED;
430 sdev_printk(KERN_WARNING, sdev,
431 "Power-on or device reset occurred\n");
432 }
433
434 if (sshdr->asc == 0x2a && sshdr->ascq == 0x01) {
435 evt_type = SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED;
436 sdev_printk(KERN_WARNING, sdev,
437 "Mode parameters changed");
438 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x06) {
439 evt_type = SDEV_EVT_ALUA_STATE_CHANGE_REPORTED;
440 sdev_printk(KERN_WARNING, sdev,
441 "Asymmetric access state changed");
442 } else if (sshdr->asc == 0x2a && sshdr->ascq == 0x09) {
443 evt_type = SDEV_EVT_CAPACITY_CHANGE_REPORTED;
444 sdev_printk(KERN_WARNING, sdev,
445 "Capacity data has changed");
446 } else if (sshdr->asc == 0x2a)
447 sdev_printk(KERN_WARNING, sdev,
448 "Parameters changed");
449 }
450
451 if (evt_type != SDEV_EVT_MAXBITS) {
452 set_bit(evt_type, sdev->pending_events);
453 schedule_work(&sdev->event_work);
454 }
455}
456
457/**
458 * scsi_check_sense - Examine scsi cmd sense
459 * @scmd: Cmd to have sense checked.
460 *
461 * Return value:
462 * SUCCESS or FAILED or NEEDS_RETRY or ADD_TO_MLQUEUE
463 *
464 * Notes:
465 * When a deferred error is detected the current command has
466 * not been executed and needs retrying.
467 */
468int scsi_check_sense(struct scsi_cmnd *scmd)
469{
470 struct scsi_device *sdev = scmd->device;
471 struct scsi_sense_hdr sshdr;
472
473 if (! scsi_command_normalize_sense(scmd, &sshdr))
474 return FAILED; /* no valid sense data */
475
476 scsi_report_sense(sdev, &sshdr);
477
478 if (scsi_sense_is_deferred(&sshdr))
479 return NEEDS_RETRY;
480
481 if (sdev->handler && sdev->handler->check_sense) {
482 int rc;
483
484 rc = sdev->handler->check_sense(sdev, &sshdr);
485 if (rc != SCSI_RETURN_NOT_HANDLED)
486 return rc;
487 /* handler does not care. Drop down to default handling */
488 }
489
490 if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
491 /*
492 * nasty: for mid-layer issued TURs, we need to return the
493 * actual sense data without any recovery attempt. For eh
494 * issued ones, we need to try to recover and interpret
495 */
496 return SUCCESS;
497
498 /*
499 * Previous logic looked for FILEMARK, EOM or ILI which are
500 * mainly associated with tapes and returned SUCCESS.
501 */
502 if (sshdr.response_code == 0x70) {
503 /* fixed format */
504 if (scmd->sense_buffer[2] & 0xe0)
505 return SUCCESS;
506 } else {
507 /*
508 * descriptor format: look for "stream commands sense data
509 * descriptor" (see SSC-3). Assume single sense data
510 * descriptor. Ignore ILI from SBC-2 READ LONG and WRITE LONG.
511 */
512 if ((sshdr.additional_length > 3) &&
513 (scmd->sense_buffer[8] == 0x4) &&
514 (scmd->sense_buffer[11] & 0xe0))
515 return SUCCESS;
516 }
517
518 switch (sshdr.sense_key) {
519 case NO_SENSE:
520 return SUCCESS;
521 case RECOVERED_ERROR:
522 return /* soft_error */ SUCCESS;
523
524 case ABORTED_COMMAND:
525 if (sshdr.asc == 0x10) /* DIF */
526 return SUCCESS;
527
528 return NEEDS_RETRY;
529 case NOT_READY:
530 case UNIT_ATTENTION:
531 /*
532 * if we are expecting a cc/ua because of a bus reset that we
533 * performed, treat this just as a retry. otherwise this is
534 * information that we should pass up to the upper-level driver
535 * so that we can deal with it there.
536 */
537 if (scmd->device->expecting_cc_ua) {
538 /*
539 * Because some device does not queue unit
540 * attentions correctly, we carefully check
541 * additional sense code and qualifier so as
542 * not to squash media change unit attention.
543 */
544 if (sshdr.asc != 0x28 || sshdr.ascq != 0x00) {
545 scmd->device->expecting_cc_ua = 0;
546 return NEEDS_RETRY;
547 }
548 }
549 /*
550 * we might also expect a cc/ua if another LUN on the target
551 * reported a UA with an ASC/ASCQ of 3F 0E -
552 * REPORTED LUNS DATA HAS CHANGED.
553 */
554 if (scmd->device->sdev_target->expecting_lun_change &&
555 sshdr.asc == 0x3f && sshdr.ascq == 0x0e)
556 return NEEDS_RETRY;
557 /*
558 * if the device is in the process of becoming ready, we
559 * should retry.
560 */
561 if ((sshdr.asc == 0x04) && (sshdr.ascq == 0x01))
562 return NEEDS_RETRY;
563 /*
564 * if the device is not started, we need to wake
565 * the error handler to start the motor
566 */
567 if (scmd->device->allow_restart &&
568 (sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
569 return FAILED;
570 /*
571 * Pass the UA upwards for a determination in the completion
572 * functions.
573 */
574 return SUCCESS;
575
576 /* these are not supported */
577 case DATA_PROTECT:
578 if (sshdr.asc == 0x27 && sshdr.ascq == 0x07) {
579 /* Thin provisioning hard threshold reached */
580 set_host_byte(scmd, DID_ALLOC_FAILURE);
581 return SUCCESS;
582 }
583 /* FALLTHROUGH */
584 case COPY_ABORTED:
585 case VOLUME_OVERFLOW:
586 case MISCOMPARE:
587 case BLANK_CHECK:
588 set_host_byte(scmd, DID_TARGET_FAILURE);
589 return SUCCESS;
590
591 case MEDIUM_ERROR:
592 if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
593 sshdr.asc == 0x13 || /* AMNF DATA FIELD */
594 sshdr.asc == 0x14) { /* RECORD NOT FOUND */
595 set_host_byte(scmd, DID_MEDIUM_ERROR);
596 return SUCCESS;
597 }
598 return NEEDS_RETRY;
599
600 case HARDWARE_ERROR:
601 if (scmd->device->retry_hwerror)
602 return ADD_TO_MLQUEUE;
603 else
604 set_host_byte(scmd, DID_TARGET_FAILURE);
605 /* FALLTHROUGH */
606
607 case ILLEGAL_REQUEST:
608 if (sshdr.asc == 0x20 || /* Invalid command operation code */
609 sshdr.asc == 0x21 || /* Logical block address out of range */
610 sshdr.asc == 0x22 || /* Invalid function */
611 sshdr.asc == 0x24 || /* Invalid field in cdb */
612 sshdr.asc == 0x26 || /* Parameter value invalid */
613 sshdr.asc == 0x27) { /* Write protected */
614 set_host_byte(scmd, DID_TARGET_FAILURE);
615 }
616 return SUCCESS;
617
618 default:
619 return SUCCESS;
620 }
621}
622EXPORT_SYMBOL_GPL(scsi_check_sense);
623
624static void scsi_handle_queue_ramp_up(struct scsi_device *sdev)
625{
626 struct scsi_host_template *sht = sdev->host->hostt;
627 struct scsi_device *tmp_sdev;
628
629 if (!sht->track_queue_depth ||
630 sdev->queue_depth >= sdev->max_queue_depth)
631 return;
632
633 if (time_before(jiffies,
634 sdev->last_queue_ramp_up + sdev->queue_ramp_up_period))
635 return;
636
637 if (time_before(jiffies,
638 sdev->last_queue_full_time + sdev->queue_ramp_up_period))
639 return;
640
641 /*
642 * Walk all devices of a target and do
643 * ramp up on them.
644 */
645 shost_for_each_device(tmp_sdev, sdev->host) {
646 if (tmp_sdev->channel != sdev->channel ||
647 tmp_sdev->id != sdev->id ||
648 tmp_sdev->queue_depth == sdev->max_queue_depth)
649 continue;
650
651 scsi_change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1);
652 sdev->last_queue_ramp_up = jiffies;
653 }
654}
655
656static void scsi_handle_queue_full(struct scsi_device *sdev)
657{
658 struct scsi_host_template *sht = sdev->host->hostt;
659 struct scsi_device *tmp_sdev;
660
661 if (!sht->track_queue_depth)
662 return;
663
664 shost_for_each_device(tmp_sdev, sdev->host) {
665 if (tmp_sdev->channel != sdev->channel ||
666 tmp_sdev->id != sdev->id)
667 continue;
668 /*
669 * We do not know the number of commands that were at
670 * the device when we got the queue full so we start
671 * from the highest possible value and work our way down.
672 */
673 scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1);
674 }
675}
676
677/**
678 * scsi_eh_completed_normally - Disposition a eh cmd on return from LLD.
679 * @scmd: SCSI cmd to examine.
680 *
681 * Notes:
682 * This is *only* called when we are examining the status of commands
683 * queued during error recovery. the main difference here is that we
684 * don't allow for the possibility of retries here, and we are a lot
685 * more restrictive about what we consider acceptable.
686 */
687static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
688{
689 /*
690 * first check the host byte, to see if there is anything in there
691 * that would indicate what we need to do.
692 */
693 if (host_byte(scmd->result) == DID_RESET) {
694 /*
695 * rats. we are already in the error handler, so we now
696 * get to try and figure out what to do next. if the sense
697 * is valid, we have a pretty good idea of what to do.
698 * if not, we mark it as FAILED.
699 */
700 return scsi_check_sense(scmd);
701 }
702 if (host_byte(scmd->result) != DID_OK)
703 return FAILED;
704
705 /*
706 * next, check the message byte.
707 */
708 if (msg_byte(scmd->result) != COMMAND_COMPLETE)
709 return FAILED;
710
711 /*
712 * now, check the status byte to see if this indicates
713 * anything special.
714 */
715 switch (status_byte(scmd->result)) {
716 case GOOD:
717 scsi_handle_queue_ramp_up(scmd->device);
718 /* FALLTHROUGH */
719 case COMMAND_TERMINATED:
720 return SUCCESS;
721 case CHECK_CONDITION:
722 return scsi_check_sense(scmd);
723 case CONDITION_GOOD:
724 case INTERMEDIATE_GOOD:
725 case INTERMEDIATE_C_GOOD:
726 /*
727 * who knows? FIXME(eric)
728 */
729 return SUCCESS;
730 case RESERVATION_CONFLICT:
731 if (scmd->cmnd[0] == TEST_UNIT_READY)
732 /* it is a success, we probed the device and
733 * found it */
734 return SUCCESS;
735 /* otherwise, we failed to send the command */
736 return FAILED;
737 case QUEUE_FULL:
738 scsi_handle_queue_full(scmd->device);
739 /* fall through */
740 case BUSY:
741 return NEEDS_RETRY;
742 default:
743 return FAILED;
744 }
745 return FAILED;
746}
747
748/**
749 * scsi_eh_done - Completion function for error handling.
750 * @scmd: Cmd that is done.
751 */
752static void scsi_eh_done(struct scsi_cmnd *scmd)
753{
754 struct completion *eh_action;
755
756 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
757 "%s result: %x\n", __func__, scmd->result));
758
759 eh_action = scmd->device->host->eh_action;
760 if (eh_action)
761 complete(eh_action);
762}
763
764/**
765 * scsi_try_host_reset - ask host adapter to reset itself
766 * @scmd: SCSI cmd to send host reset.
767 */
768static int scsi_try_host_reset(struct scsi_cmnd *scmd)
769{
770 unsigned long flags;
771 int rtn;
772 struct Scsi_Host *host = scmd->device->host;
773 struct scsi_host_template *hostt = host->hostt;
774
775 SCSI_LOG_ERROR_RECOVERY(3,
776 shost_printk(KERN_INFO, host, "Snd Host RST\n"));
777
778 if (!hostt->eh_host_reset_handler)
779 return FAILED;
780
781 rtn = hostt->eh_host_reset_handler(scmd);
782
783 if (rtn == SUCCESS) {
784 if (!hostt->skip_settle_delay)
785 ssleep(HOST_RESET_SETTLE_TIME);
786 spin_lock_irqsave(host->host_lock, flags);
787 scsi_report_bus_reset(host, scmd_channel(scmd));
788 spin_unlock_irqrestore(host->host_lock, flags);
789 }
790
791 return rtn;
792}
793
794/**
795 * scsi_try_bus_reset - ask host to perform a bus reset
796 * @scmd: SCSI cmd to send bus reset.
797 */
798static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
799{
800 unsigned long flags;
801 int rtn;
802 struct Scsi_Host *host = scmd->device->host;
803 struct scsi_host_template *hostt = host->hostt;
804
805 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
806 "%s: Snd Bus RST\n", __func__));
807
808 if (!hostt->eh_bus_reset_handler)
809 return FAILED;
810
811 rtn = hostt->eh_bus_reset_handler(scmd);
812
813 if (rtn == SUCCESS) {
814 if (!hostt->skip_settle_delay)
815 ssleep(BUS_RESET_SETTLE_TIME);
816 spin_lock_irqsave(host->host_lock, flags);
817 scsi_report_bus_reset(host, scmd_channel(scmd));
818 spin_unlock_irqrestore(host->host_lock, flags);
819 }
820
821 return rtn;
822}
823
824static void __scsi_report_device_reset(struct scsi_device *sdev, void *data)
825{
826 sdev->was_reset = 1;
827 sdev->expecting_cc_ua = 1;
828}
829
830/**
831 * scsi_try_target_reset - Ask host to perform a target reset
832 * @scmd: SCSI cmd used to send a target reset
833 *
834 * Notes:
835 * There is no timeout for this operation. if this operation is
836 * unreliable for a given host, then the host itself needs to put a
837 * timer on it, and set the host back to a consistent state prior to
838 * returning.
839 */
840static int scsi_try_target_reset(struct scsi_cmnd *scmd)
841{
842 unsigned long flags;
843 int rtn;
844 struct Scsi_Host *host = scmd->device->host;
845 struct scsi_host_template *hostt = host->hostt;
846
847 if (!hostt->eh_target_reset_handler)
848 return FAILED;
849
850 rtn = hostt->eh_target_reset_handler(scmd);
851 if (rtn == SUCCESS) {
852 spin_lock_irqsave(host->host_lock, flags);
853 __starget_for_each_device(scsi_target(scmd->device), NULL,
854 __scsi_report_device_reset);
855 spin_unlock_irqrestore(host->host_lock, flags);
856 }
857
858 return rtn;
859}
860
861/**
862 * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
863 * @scmd: SCSI cmd used to send BDR
864 *
865 * Notes:
866 * There is no timeout for this operation. if this operation is
867 * unreliable for a given host, then the host itself needs to put a
868 * timer on it, and set the host back to a consistent state prior to
869 * returning.
870 */
871static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
872{
873 int rtn;
874 struct scsi_host_template *hostt = scmd->device->host->hostt;
875
876 if (!hostt->eh_device_reset_handler)
877 return FAILED;
878
879 rtn = hostt->eh_device_reset_handler(scmd);
880 if (rtn == SUCCESS)
881 __scsi_report_device_reset(scmd->device, NULL);
882 return rtn;
883}
884
885/**
886 * scsi_try_to_abort_cmd - Ask host to abort a SCSI command
887 * @hostt: SCSI driver host template
888 * @scmd: SCSI cmd used to send a target reset
889 *
890 * Return value:
891 * SUCCESS, FAILED, or FAST_IO_FAIL
892 *
893 * Notes:
894 * SUCCESS does not necessarily indicate that the command
895 * has been aborted; it only indicates that the LLDDs
896 * has cleared all references to that command.
897 * LLDDs should return FAILED only if an abort was required
898 * but could not be executed. LLDDs should return FAST_IO_FAIL
899 * if the device is temporarily unavailable (eg due to a
900 * link down on FibreChannel)
901 */
902static int scsi_try_to_abort_cmd(struct scsi_host_template *hostt,
903 struct scsi_cmnd *scmd)
904{
905 if (!hostt->eh_abort_handler)
906 return FAILED;
907
908 return hostt->eh_abort_handler(scmd);
909}
910
911static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
912{
913 if (scsi_try_to_abort_cmd(scmd->device->host->hostt, scmd) != SUCCESS)
914 if (scsi_try_bus_device_reset(scmd) != SUCCESS)
915 if (scsi_try_target_reset(scmd) != SUCCESS)
916 if (scsi_try_bus_reset(scmd) != SUCCESS)
917 scsi_try_host_reset(scmd);
918}
919
920/**
921 * scsi_eh_prep_cmnd - Save a scsi command info as part of error recovery
922 * @scmd: SCSI command structure to hijack
923 * @ses: structure to save restore information
924 * @cmnd: CDB to send. Can be NULL if no new cmnd is needed
925 * @cmnd_size: size in bytes of @cmnd (must be <= BLK_MAX_CDB)
926 * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
927 *
928 * This function is used to save a scsi command information before re-execution
929 * as part of the error recovery process. If @sense_bytes is 0 the command
930 * sent must be one that does not transfer any data. If @sense_bytes != 0
931 * @cmnd is ignored and this functions sets up a REQUEST_SENSE command
932 * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer.
933 */
934void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
935 unsigned char *cmnd, int cmnd_size, unsigned sense_bytes)
936{
937 struct scsi_device *sdev = scmd->device;
938
939 /*
940 * We need saved copies of a number of fields - this is because
941 * error handling may need to overwrite these with different values
942 * to run different commands, and once error handling is complete,
943 * we will need to restore these values prior to running the actual
944 * command.
945 */
946 ses->cmd_len = scmd->cmd_len;
947 ses->cmnd = scmd->cmnd;
948 ses->data_direction = scmd->sc_data_direction;
949 ses->sdb = scmd->sdb;
950 ses->next_rq = scmd->request->next_rq;
951 ses->result = scmd->result;
952 ses->underflow = scmd->underflow;
953 ses->prot_op = scmd->prot_op;
954 ses->eh_eflags = scmd->eh_eflags;
955
956 scmd->prot_op = SCSI_PROT_NORMAL;
957 scmd->eh_eflags = 0;
958 scmd->cmnd = ses->eh_cmnd;
959 memset(scmd->cmnd, 0, BLK_MAX_CDB);
960 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
961 scmd->request->next_rq = NULL;
962 scmd->result = 0;
963
964 if (sense_bytes) {
965 scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
966 sense_bytes);
967 sg_init_one(&ses->sense_sgl, scmd->sense_buffer,
968 scmd->sdb.length);
969 scmd->sdb.table.sgl = &ses->sense_sgl;
970 scmd->sc_data_direction = DMA_FROM_DEVICE;
971 scmd->sdb.table.nents = scmd->sdb.table.orig_nents = 1;
972 scmd->cmnd[0] = REQUEST_SENSE;
973 scmd->cmnd[4] = scmd->sdb.length;
974 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
975 } else {
976 scmd->sc_data_direction = DMA_NONE;
977 if (cmnd) {
978 BUG_ON(cmnd_size > BLK_MAX_CDB);
979 memcpy(scmd->cmnd, cmnd, cmnd_size);
980 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
981 }
982 }
983
984 scmd->underflow = 0;
985
986 if (sdev->scsi_level <= SCSI_2 && sdev->scsi_level != SCSI_UNKNOWN)
987 scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
988 (sdev->lun << 5 & 0xe0);
989
990 /*
991 * Zero the sense buffer. The scsi spec mandates that any
992 * untransferred sense data should be interpreted as being zero.
993 */
994 memset(scmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
995}
996EXPORT_SYMBOL(scsi_eh_prep_cmnd);
997
998/**
999 * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recovery
1000 * @scmd: SCSI command structure to restore
1001 * @ses: saved information from a coresponding call to scsi_eh_prep_cmnd
1002 *
1003 * Undo any damage done by above scsi_eh_prep_cmnd().
1004 */
1005void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
1006{
1007 /*
1008 * Restore original data
1009 */
1010 scmd->cmd_len = ses->cmd_len;
1011 scmd->cmnd = ses->cmnd;
1012 scmd->sc_data_direction = ses->data_direction;
1013 scmd->sdb = ses->sdb;
1014 scmd->request->next_rq = ses->next_rq;
1015 scmd->result = ses->result;
1016 scmd->underflow = ses->underflow;
1017 scmd->prot_op = ses->prot_op;
1018 scmd->eh_eflags = ses->eh_eflags;
1019}
1020EXPORT_SYMBOL(scsi_eh_restore_cmnd);
1021
1022/**
1023 * scsi_send_eh_cmnd - submit a scsi command as part of error recovery
1024 * @scmd: SCSI command structure to hijack
1025 * @cmnd: CDB to send
1026 * @cmnd_size: size in bytes of @cmnd
1027 * @timeout: timeout for this request
1028 * @sense_bytes: size of sense data to copy or 0
1029 *
1030 * This function is used to send a scsi command down to a target device
1031 * as part of the error recovery process. See also scsi_eh_prep_cmnd() above.
1032 *
1033 * Return value:
1034 * SUCCESS or FAILED or NEEDS_RETRY
1035 */
1036static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
1037 int cmnd_size, int timeout, unsigned sense_bytes)
1038{
1039 struct scsi_device *sdev = scmd->device;
1040 struct Scsi_Host *shost = sdev->host;
1041 DECLARE_COMPLETION_ONSTACK(done);
1042 unsigned long timeleft = timeout;
1043 struct scsi_eh_save ses;
1044 const unsigned long stall_for = msecs_to_jiffies(100);
1045 int rtn;
1046
1047retry:
1048 scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes);
1049 shost->eh_action = &done;
1050
1051 scsi_log_send(scmd);
1052 scmd->scsi_done = scsi_eh_done;
1053 rtn = shost->hostt->queuecommand(shost, scmd);
1054 if (rtn) {
1055 if (timeleft > stall_for) {
1056 scsi_eh_restore_cmnd(scmd, &ses);
1057 timeleft -= stall_for;
1058 msleep(jiffies_to_msecs(stall_for));
1059 goto retry;
1060 }
1061 /* signal not to enter either branch of the if () below */
1062 timeleft = 0;
1063 rtn = FAILED;
1064 } else {
1065 timeleft = wait_for_completion_timeout(&done, timeout);
1066 rtn = SUCCESS;
1067 }
1068
1069 shost->eh_action = NULL;
1070
1071 scsi_log_completion(scmd, rtn);
1072
1073 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1074 "%s timeleft: %ld\n",
1075 __func__, timeleft));
1076
1077 /*
1078 * If there is time left scsi_eh_done got called, and we will examine
1079 * the actual status codes to see whether the command actually did
1080 * complete normally, else if we have a zero return and no time left,
1081 * the command must still be pending, so abort it and return FAILED.
1082 * If we never actually managed to issue the command, because
1083 * ->queuecommand() kept returning non zero, use the rtn = FAILED
1084 * value above (so don't execute either branch of the if)
1085 */
1086 if (timeleft) {
1087 rtn = scsi_eh_completed_normally(scmd);
1088 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1089 "%s: scsi_eh_completed_normally %x\n", __func__, rtn));
1090
1091 switch (rtn) {
1092 case SUCCESS:
1093 case NEEDS_RETRY:
1094 case FAILED:
1095 break;
1096 case ADD_TO_MLQUEUE:
1097 rtn = NEEDS_RETRY;
1098 break;
1099 default:
1100 rtn = FAILED;
1101 break;
1102 }
1103 } else if (rtn != FAILED) {
1104 scsi_abort_eh_cmnd(scmd);
1105 rtn = FAILED;
1106 }
1107
1108 scsi_eh_restore_cmnd(scmd, &ses);
1109
1110 return rtn;
1111}
1112
1113/**
1114 * scsi_request_sense - Request sense data from a particular target.
1115 * @scmd: SCSI cmd for request sense.
1116 *
1117 * Notes:
1118 * Some hosts automatically obtain this information, others require
1119 * that we obtain it on our own. This function will *not* return until
1120 * the command either times out, or it completes.
1121 */
1122static int scsi_request_sense(struct scsi_cmnd *scmd)
1123{
1124 return scsi_send_eh_cmnd(scmd, NULL, 0, scmd->device->eh_timeout, ~0);
1125}
1126
1127static int scsi_eh_action(struct scsi_cmnd *scmd, int rtn)
1128{
1129 if (!blk_rq_is_passthrough(scmd->request)) {
1130 struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
1131 if (sdrv->eh_action)
1132 rtn = sdrv->eh_action(scmd, rtn);
1133 }
1134 return rtn;
1135}
1136
1137/**
1138 * scsi_eh_finish_cmd - Handle a cmd that eh is finished with.
1139 * @scmd: Original SCSI cmd that eh has finished.
1140 * @done_q: Queue for processed commands.
1141 *
1142 * Notes:
1143 * We don't want to use the normal command completion while we are are
1144 * still handling errors - it may cause other commands to be queued,
1145 * and that would disturb what we are doing. Thus we really want to
1146 * keep a list of pending commands for final completion, and once we
1147 * are ready to leave error handling we handle completion for real.
1148 */
1149void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
1150{
1151 list_move_tail(&scmd->eh_entry, done_q);
1152}
1153EXPORT_SYMBOL(scsi_eh_finish_cmd);
1154
1155/**
1156 * scsi_eh_get_sense - Get device sense data.
1157 * @work_q: Queue of commands to process.
1158 * @done_q: Queue of processed commands.
1159 *
1160 * Description:
1161 * See if we need to request sense information. if so, then get it
1162 * now, so we have a better idea of what to do.
1163 *
1164 * Notes:
1165 * This has the unfortunate side effect that if a shost adapter does
1166 * not automatically request sense information, we end up shutting
1167 * it down before we request it.
1168 *
1169 * All drivers should request sense information internally these days,
1170 * so for now all I have to say is tough noogies if you end up in here.
1171 *
1172 * XXX: Long term this code should go away, but that needs an audit of
1173 * all LLDDs first.
1174 */
1175int scsi_eh_get_sense(struct list_head *work_q,
1176 struct list_head *done_q)
1177{
1178 struct scsi_cmnd *scmd, *next;
1179 struct Scsi_Host *shost;
1180 int rtn;
1181
1182 /*
1183 * If SCSI_EH_ABORT_SCHEDULED has been set, it is timeout IO,
1184 * should not get sense.
1185 */
1186 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1187 if ((scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) ||
1188 SCSI_SENSE_VALID(scmd))
1189 continue;
1190
1191 shost = scmd->device->host;
1192 if (scsi_host_eh_past_deadline(shost)) {
1193 SCSI_LOG_ERROR_RECOVERY(3,
1194 scmd_printk(KERN_INFO, scmd,
1195 "%s: skip request sense, past eh deadline\n",
1196 current->comm));
1197 break;
1198 }
1199 if (status_byte(scmd->result) != CHECK_CONDITION)
1200 /*
1201 * don't request sense if there's no check condition
1202 * status because the error we're processing isn't one
1203 * that has a sense code (and some devices get
1204 * confused by sense requests out of the blue)
1205 */
1206 continue;
1207
1208 SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd,
1209 "%s: requesting sense\n",
1210 current->comm));
1211 rtn = scsi_request_sense(scmd);
1212 if (rtn != SUCCESS)
1213 continue;
1214
1215 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1216 "sense requested, result %x\n", scmd->result));
1217 SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd));
1218
1219 rtn = scsi_decide_disposition(scmd);
1220
1221 /*
1222 * if the result was normal, then just pass it along to the
1223 * upper level.
1224 */
1225 if (rtn == SUCCESS)
1226 /* we don't want this command reissued, just
1227 * finished with the sense data, so set
1228 * retries to the max allowed to ensure it
1229 * won't get reissued */
1230 scmd->retries = scmd->allowed;
1231 else if (rtn != NEEDS_RETRY)
1232 continue;
1233
1234 scsi_eh_finish_cmd(scmd, done_q);
1235 }
1236
1237 return list_empty(work_q);
1238}
1239EXPORT_SYMBOL_GPL(scsi_eh_get_sense);
1240
1241/**
1242 * scsi_eh_tur - Send TUR to device.
1243 * @scmd: &scsi_cmnd to send TUR
1244 *
1245 * Return value:
1246 * 0 - Device is ready. 1 - Device NOT ready.
1247 */
1248static int scsi_eh_tur(struct scsi_cmnd *scmd)
1249{
1250 static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
1251 int retry_cnt = 1, rtn;
1252
1253retry_tur:
1254 rtn = scsi_send_eh_cmnd(scmd, tur_command, 6,
1255 scmd->device->eh_timeout, 0);
1256
1257 SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
1258 "%s return: %x\n", __func__, rtn));
1259
1260 switch (rtn) {
1261 case NEEDS_RETRY:
1262 if (retry_cnt--)
1263 goto retry_tur;
1264 /*FALLTHRU*/
1265 case SUCCESS:
1266 return 0;
1267 default:
1268 return 1;
1269 }
1270}
1271
1272/**
1273 * scsi_eh_test_devices - check if devices are responding from error recovery.
1274 * @cmd_list: scsi commands in error recovery.
1275 * @work_q: queue for commands which still need more error recovery
1276 * @done_q: queue for commands which are finished
1277 * @try_stu: boolean on if a STU command should be tried in addition to TUR.
1278 *
1279 * Decription:
1280 * Tests if devices are in a working state. Commands to devices now in
1281 * a working state are sent to the done_q while commands to devices which
1282 * are still failing to respond are returned to the work_q for more
1283 * processing.
1284 **/
1285static int scsi_eh_test_devices(struct list_head *cmd_list,
1286 struct list_head *work_q,
1287 struct list_head *done_q, int try_stu)
1288{
1289 struct scsi_cmnd *scmd, *next;
1290 struct scsi_device *sdev;
1291 int finish_cmds;
1292
1293 while (!list_empty(cmd_list)) {
1294 scmd = list_entry(cmd_list->next, struct scsi_cmnd, eh_entry);
1295 sdev = scmd->device;
1296
1297 if (!try_stu) {
1298 if (scsi_host_eh_past_deadline(sdev->host)) {
1299 /* Push items back onto work_q */
1300 list_splice_init(cmd_list, work_q);
1301 SCSI_LOG_ERROR_RECOVERY(3,
1302 sdev_printk(KERN_INFO, sdev,
1303 "%s: skip test device, past eh deadline",
1304 current->comm));
1305 break;
1306 }
1307 }
1308
1309 finish_cmds = !scsi_device_online(scmd->device) ||
1310 (try_stu && !scsi_eh_try_stu(scmd) &&
1311 !scsi_eh_tur(scmd)) ||
1312 !scsi_eh_tur(scmd);
1313
1314 list_for_each_entry_safe(scmd, next, cmd_list, eh_entry)
1315 if (scmd->device == sdev) {
1316 if (finish_cmds &&
1317 (try_stu ||
1318 scsi_eh_action(scmd, SUCCESS) == SUCCESS))
1319 scsi_eh_finish_cmd(scmd, done_q);
1320 else
1321 list_move_tail(&scmd->eh_entry, work_q);
1322 }
1323 }
1324 return list_empty(work_q);
1325}
1326
1327/**
1328 * scsi_eh_try_stu - Send START_UNIT to device.
1329 * @scmd: &scsi_cmnd to send START_UNIT
1330 *
1331 * Return value:
1332 * 0 - Device is ready. 1 - Device NOT ready.
1333 */
1334static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
1335{
1336 static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
1337
1338 if (scmd->device->allow_restart) {
1339 int i, rtn = NEEDS_RETRY;
1340
1341 for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
1342 rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0);
1343
1344 if (rtn == SUCCESS)
1345 return 0;
1346 }
1347
1348 return 1;
1349}
1350
1351 /**
1352 * scsi_eh_stu - send START_UNIT if needed
1353 * @shost: &scsi host being recovered.
1354 * @work_q: &list_head for pending commands.
1355 * @done_q: &list_head for processed commands.
1356 *
1357 * Notes:
1358 * If commands are failing due to not ready, initializing command required,
1359 * try revalidating the device, which will end up sending a start unit.
1360 */
1361static int scsi_eh_stu(struct Scsi_Host *shost,
1362 struct list_head *work_q,
1363 struct list_head *done_q)
1364{
1365 struct scsi_cmnd *scmd, *stu_scmd, *next;
1366 struct scsi_device *sdev;
1367
1368 shost_for_each_device(sdev, shost) {
1369 if (scsi_host_eh_past_deadline(shost)) {
1370 SCSI_LOG_ERROR_RECOVERY(3,
1371 sdev_printk(KERN_INFO, sdev,
1372 "%s: skip START_UNIT, past eh deadline\n",
1373 current->comm));
1374 break;
1375 }
1376 stu_scmd = NULL;
1377 list_for_each_entry(scmd, work_q, eh_entry)
1378 if (scmd->device == sdev && SCSI_SENSE_VALID(scmd) &&
1379 scsi_check_sense(scmd) == FAILED ) {
1380 stu_scmd = scmd;
1381 break;
1382 }
1383
1384 if (!stu_scmd)
1385 continue;
1386
1387 SCSI_LOG_ERROR_RECOVERY(3,
1388 sdev_printk(KERN_INFO, sdev,
1389 "%s: Sending START_UNIT\n",
1390 current->comm));
1391
1392 if (!scsi_eh_try_stu(stu_scmd)) {
1393 if (!scsi_device_online(sdev) ||
1394 !scsi_eh_tur(stu_scmd)) {
1395 list_for_each_entry_safe(scmd, next,
1396 work_q, eh_entry) {
1397 if (scmd->device == sdev &&
1398 scsi_eh_action(scmd, SUCCESS) == SUCCESS)
1399 scsi_eh_finish_cmd(scmd, done_q);
1400 }
1401 }
1402 } else {
1403 SCSI_LOG_ERROR_RECOVERY(3,
1404 sdev_printk(KERN_INFO, sdev,
1405 "%s: START_UNIT failed\n",
1406 current->comm));
1407 }
1408 }
1409
1410 return list_empty(work_q);
1411}
1412
1413
1414/**
1415 * scsi_eh_bus_device_reset - send bdr if needed
1416 * @shost: scsi host being recovered.
1417 * @work_q: &list_head for pending commands.
1418 * @done_q: &list_head for processed commands.
1419 *
1420 * Notes:
1421 * Try a bus device reset. Still, look to see whether we have multiple
1422 * devices that are jammed or not - if we have multiple devices, it
1423 * makes no sense to try bus_device_reset - we really would need to try
1424 * a bus_reset instead.
1425 */
1426static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
1427 struct list_head *work_q,
1428 struct list_head *done_q)
1429{
1430 struct scsi_cmnd *scmd, *bdr_scmd, *next;
1431 struct scsi_device *sdev;
1432 int rtn;
1433
1434 shost_for_each_device(sdev, shost) {
1435 if (scsi_host_eh_past_deadline(shost)) {
1436 SCSI_LOG_ERROR_RECOVERY(3,
1437 sdev_printk(KERN_INFO, sdev,
1438 "%s: skip BDR, past eh deadline\n",
1439 current->comm));
1440 break;
1441 }
1442 bdr_scmd = NULL;
1443 list_for_each_entry(scmd, work_q, eh_entry)
1444 if (scmd->device == sdev) {
1445 bdr_scmd = scmd;
1446 break;
1447 }
1448
1449 if (!bdr_scmd)
1450 continue;
1451
1452 SCSI_LOG_ERROR_RECOVERY(3,
1453 sdev_printk(KERN_INFO, sdev,
1454 "%s: Sending BDR\n", current->comm));
1455 rtn = scsi_try_bus_device_reset(bdr_scmd);
1456 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1457 if (!scsi_device_online(sdev) ||
1458 rtn == FAST_IO_FAIL ||
1459 !scsi_eh_tur(bdr_scmd)) {
1460 list_for_each_entry_safe(scmd, next,
1461 work_q, eh_entry) {
1462 if (scmd->device == sdev &&
1463 scsi_eh_action(scmd, rtn) != FAILED)
1464 scsi_eh_finish_cmd(scmd,
1465 done_q);
1466 }
1467 }
1468 } else {
1469 SCSI_LOG_ERROR_RECOVERY(3,
1470 sdev_printk(KERN_INFO, sdev,
1471 "%s: BDR failed\n", current->comm));
1472 }
1473 }
1474
1475 return list_empty(work_q);
1476}
1477
1478/**
1479 * scsi_eh_target_reset - send target reset if needed
1480 * @shost: scsi host being recovered.
1481 * @work_q: &list_head for pending commands.
1482 * @done_q: &list_head for processed commands.
1483 *
1484 * Notes:
1485 * Try a target reset.
1486 */
1487static int scsi_eh_target_reset(struct Scsi_Host *shost,
1488 struct list_head *work_q,
1489 struct list_head *done_q)
1490{
1491 LIST_HEAD(tmp_list);
1492 LIST_HEAD(check_list);
1493
1494 list_splice_init(work_q, &tmp_list);
1495
1496 while (!list_empty(&tmp_list)) {
1497 struct scsi_cmnd *next, *scmd;
1498 int rtn;
1499 unsigned int id;
1500
1501 if (scsi_host_eh_past_deadline(shost)) {
1502 /* push back on work queue for further processing */
1503 list_splice_init(&check_list, work_q);
1504 list_splice_init(&tmp_list, work_q);
1505 SCSI_LOG_ERROR_RECOVERY(3,
1506 shost_printk(KERN_INFO, shost,
1507 "%s: Skip target reset, past eh deadline\n",
1508 current->comm));
1509 return list_empty(work_q);
1510 }
1511
1512 scmd = list_entry(tmp_list.next, struct scsi_cmnd, eh_entry);
1513 id = scmd_id(scmd);
1514
1515 SCSI_LOG_ERROR_RECOVERY(3,
1516 shost_printk(KERN_INFO, shost,
1517 "%s: Sending target reset to target %d\n",
1518 current->comm, id));
1519 rtn = scsi_try_target_reset(scmd);
1520 if (rtn != SUCCESS && rtn != FAST_IO_FAIL)
1521 SCSI_LOG_ERROR_RECOVERY(3,
1522 shost_printk(KERN_INFO, shost,
1523 "%s: Target reset failed"
1524 " target: %d\n",
1525 current->comm, id));
1526 list_for_each_entry_safe(scmd, next, &tmp_list, eh_entry) {
1527 if (scmd_id(scmd) != id)
1528 continue;
1529
1530 if (rtn == SUCCESS)
1531 list_move_tail(&scmd->eh_entry, &check_list);
1532 else if (rtn == FAST_IO_FAIL)
1533 scsi_eh_finish_cmd(scmd, done_q);
1534 else
1535 /* push back on work queue for further processing */
1536 list_move(&scmd->eh_entry, work_q);
1537 }
1538 }
1539
1540 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1541}
1542
1543/**
1544 * scsi_eh_bus_reset - send a bus reset
1545 * @shost: &scsi host being recovered.
1546 * @work_q: &list_head for pending commands.
1547 * @done_q: &list_head for processed commands.
1548 */
1549static int scsi_eh_bus_reset(struct Scsi_Host *shost,
1550 struct list_head *work_q,
1551 struct list_head *done_q)
1552{
1553 struct scsi_cmnd *scmd, *chan_scmd, *next;
1554 LIST_HEAD(check_list);
1555 unsigned int channel;
1556 int rtn;
1557
1558 /*
1559 * we really want to loop over the various channels, and do this on
1560 * a channel by channel basis. we should also check to see if any
1561 * of the failed commands are on soft_reset devices, and if so, skip
1562 * the reset.
1563 */
1564
1565 for (channel = 0; channel <= shost->max_channel; channel++) {
1566 if (scsi_host_eh_past_deadline(shost)) {
1567 list_splice_init(&check_list, work_q);
1568 SCSI_LOG_ERROR_RECOVERY(3,
1569 shost_printk(KERN_INFO, shost,
1570 "%s: skip BRST, past eh deadline\n",
1571 current->comm));
1572 return list_empty(work_q);
1573 }
1574
1575 chan_scmd = NULL;
1576 list_for_each_entry(scmd, work_q, eh_entry) {
1577 if (channel == scmd_channel(scmd)) {
1578 chan_scmd = scmd;
1579 break;
1580 /*
1581 * FIXME add back in some support for
1582 * soft_reset devices.
1583 */
1584 }
1585 }
1586
1587 if (!chan_scmd)
1588 continue;
1589 SCSI_LOG_ERROR_RECOVERY(3,
1590 shost_printk(KERN_INFO, shost,
1591 "%s: Sending BRST chan: %d\n",
1592 current->comm, channel));
1593 rtn = scsi_try_bus_reset(chan_scmd);
1594 if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
1595 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1596 if (channel == scmd_channel(scmd)) {
1597 if (rtn == FAST_IO_FAIL)
1598 scsi_eh_finish_cmd(scmd,
1599 done_q);
1600 else
1601 list_move_tail(&scmd->eh_entry,
1602 &check_list);
1603 }
1604 }
1605 } else {
1606 SCSI_LOG_ERROR_RECOVERY(3,
1607 shost_printk(KERN_INFO, shost,
1608 "%s: BRST failed chan: %d\n",
1609 current->comm, channel));
1610 }
1611 }
1612 return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
1613}
1614
1615/**
1616 * scsi_eh_host_reset - send a host reset
1617 * @shost: host to be reset.
1618 * @work_q: &list_head for pending commands.
1619 * @done_q: &list_head for processed commands.
1620 */
1621static int scsi_eh_host_reset(struct Scsi_Host *shost,
1622 struct list_head *work_q,
1623 struct list_head *done_q)
1624{
1625 struct scsi_cmnd *scmd, *next;
1626 LIST_HEAD(check_list);
1627 int rtn;
1628
1629 if (!list_empty(work_q)) {
1630 scmd = list_entry(work_q->next,
1631 struct scsi_cmnd, eh_entry);
1632
1633 SCSI_LOG_ERROR_RECOVERY(3,
1634 shost_printk(KERN_INFO, shost,
1635 "%s: Sending HRST\n",
1636 current->comm));
1637
1638 rtn = scsi_try_host_reset(scmd);
1639 if (rtn == SUCCESS) {
1640 list_splice_init(work_q, &check_list);
1641 } else if (rtn == FAST_IO_FAIL) {
1642 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1643 scsi_eh_finish_cmd(scmd, done_q);
1644 }
1645 } else {
1646 SCSI_LOG_ERROR_RECOVERY(3,
1647 shost_printk(KERN_INFO, shost,
1648 "%s: HRST failed\n",
1649 current->comm));
1650 }
1651 }
1652 return scsi_eh_test_devices(&check_list, work_q, done_q, 1);
1653}
1654
1655/**
1656 * scsi_eh_offline_sdevs - offline scsi devices that fail to recover
1657 * @work_q: &list_head for pending commands.
1658 * @done_q: &list_head for processed commands.
1659 */
1660static void scsi_eh_offline_sdevs(struct list_head *work_q,
1661 struct list_head *done_q)
1662{
1663 struct scsi_cmnd *scmd, *next;
1664 struct scsi_device *sdev;
1665
1666 list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
1667 sdev_printk(KERN_INFO, scmd->device, "Device offlined - "
1668 "not ready after error recovery\n");
1669 sdev = scmd->device;
1670
1671 mutex_lock(&sdev->state_mutex);
1672 scsi_device_set_state(sdev, SDEV_OFFLINE);
1673 mutex_unlock(&sdev->state_mutex);
1674
1675 scsi_eh_finish_cmd(scmd, done_q);
1676 }
1677 return;
1678}
1679
1680/**
1681 * scsi_noretry_cmd - determine if command should be failed fast
1682 * @scmd: SCSI cmd to examine.
1683 */
1684int scsi_noretry_cmd(struct scsi_cmnd *scmd)
1685{
1686 switch (host_byte(scmd->result)) {
1687 case DID_OK:
1688 break;
1689 case DID_TIME_OUT:
1690 goto check_type;
1691 case DID_BUS_BUSY:
1692 return (scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT);
1693 case DID_PARITY:
1694 return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
1695 case DID_ERROR:
1696 if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
1697 status_byte(scmd->result) == RESERVATION_CONFLICT)
1698 return 0;
1699 /* fall through */
1700 case DID_SOFT_ERROR:
1701 return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
1702 }
1703
1704 if (status_byte(scmd->result) != CHECK_CONDITION)
1705 return 0;
1706
1707check_type:
1708 /*
1709 * assume caller has checked sense and determined
1710 * the check condition was retryable.
1711 */
1712 if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
1713 blk_rq_is_passthrough(scmd->request))
1714 return 1;
1715 else
1716 return 0;
1717}
1718
1719/**
1720 * scsi_decide_disposition - Disposition a cmd on return from LLD.
1721 * @scmd: SCSI cmd to examine.
1722 *
1723 * Notes:
1724 * This is *only* called when we are examining the status after sending
1725 * out the actual data command. any commands that are queued for error
1726 * recovery (e.g. test_unit_ready) do *not* come through here.
1727 *
1728 * When this routine returns failed, it means the error handler thread
1729 * is woken. In cases where the error code indicates an error that
1730 * doesn't require the error handler read (i.e. we don't need to
1731 * abort/reset), this function should return SUCCESS.
1732 */
1733int scsi_decide_disposition(struct scsi_cmnd *scmd)
1734{
1735 int rtn;
1736
1737 /*
1738 * if the device is offline, then we clearly just pass the result back
1739 * up to the top level.
1740 */
1741 if (!scsi_device_online(scmd->device)) {
1742 SCSI_LOG_ERROR_RECOVERY(5, scmd_printk(KERN_INFO, scmd,
1743 "%s: device offline - report as SUCCESS\n", __func__));
1744 return SUCCESS;
1745 }
1746
1747 /*
1748 * first check the host byte, to see if there is anything in there
1749 * that would indicate what we need to do.
1750 */
1751 switch (host_byte(scmd->result)) {
1752 case DID_PASSTHROUGH:
1753 /*
1754 * no matter what, pass this through to the upper layer.
1755 * nuke this special code so that it looks like we are saying
1756 * did_ok.
1757 */
1758 scmd->result &= 0xff00ffff;
1759 return SUCCESS;
1760 case DID_OK:
1761 /*
1762 * looks good. drop through, and check the next byte.
1763 */
1764 break;
1765 case DID_ABORT:
1766 if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
1767 set_host_byte(scmd, DID_TIME_OUT);
1768 return SUCCESS;
1769 }
1770 /* FALLTHROUGH */
1771 case DID_NO_CONNECT:
1772 case DID_BAD_TARGET:
1773 /*
1774 * note - this means that we just report the status back
1775 * to the top level driver, not that we actually think
1776 * that it indicates SUCCESS.
1777 */
1778 return SUCCESS;
1779 case DID_SOFT_ERROR:
1780 /*
1781 * when the low level driver returns did_soft_error,
1782 * it is responsible for keeping an internal retry counter
1783 * in order to avoid endless loops (db)
1784 */
1785 goto maybe_retry;
1786 case DID_IMM_RETRY:
1787 return NEEDS_RETRY;
1788
1789 case DID_REQUEUE:
1790 return ADD_TO_MLQUEUE;
1791 case DID_TRANSPORT_DISRUPTED:
1792 /*
1793 * LLD/transport was disrupted during processing of the IO.
1794 * The transport class is now blocked/blocking,
1795 * and the transport will decide what to do with the IO
1796 * based on its timers and recovery capablilities if
1797 * there are enough retries.
1798 */
1799 goto maybe_retry;
1800 case DID_TRANSPORT_FAILFAST:
1801 /*
1802 * The transport decided to failfast the IO (most likely
1803 * the fast io fail tmo fired), so send IO directly upwards.
1804 */
1805 return SUCCESS;
1806 case DID_ERROR:
1807 if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
1808 status_byte(scmd->result) == RESERVATION_CONFLICT)
1809 /*
1810 * execute reservation conflict processing code
1811 * lower down
1812 */
1813 break;
1814 /* fallthrough */
1815 case DID_BUS_BUSY:
1816 case DID_PARITY:
1817 goto maybe_retry;
1818 case DID_TIME_OUT:
1819 /*
1820 * when we scan the bus, we get timeout messages for
1821 * these commands if there is no device available.
1822 * other hosts report did_no_connect for the same thing.
1823 */
1824 if ((scmd->cmnd[0] == TEST_UNIT_READY ||
1825 scmd->cmnd[0] == INQUIRY)) {
1826 return SUCCESS;
1827 } else {
1828 return FAILED;
1829 }
1830 case DID_RESET:
1831 return SUCCESS;
1832 default:
1833 return FAILED;
1834 }
1835
1836 /*
1837 * next, check the message byte.
1838 */
1839 if (msg_byte(scmd->result) != COMMAND_COMPLETE)
1840 return FAILED;
1841
1842 /*
1843 * check the status byte to see if this indicates anything special.
1844 */
1845 switch (status_byte(scmd->result)) {
1846 case QUEUE_FULL:
1847 scsi_handle_queue_full(scmd->device);
1848 /*
1849 * the case of trying to send too many commands to a
1850 * tagged queueing device.
1851 */
1852 /* FALLTHROUGH */
1853 case BUSY:
1854 /*
1855 * device can't talk to us at the moment. Should only
1856 * occur (SAM-3) when the task queue is empty, so will cause
1857 * the empty queue handling to trigger a stall in the
1858 * device.
1859 */
1860 return ADD_TO_MLQUEUE;
1861 case GOOD:
1862 if (scmd->cmnd[0] == REPORT_LUNS)
1863 scmd->device->sdev_target->expecting_lun_change = 0;
1864 scsi_handle_queue_ramp_up(scmd->device);
1865 /* FALLTHROUGH */
1866 case COMMAND_TERMINATED:
1867 return SUCCESS;
1868 case TASK_ABORTED:
1869 goto maybe_retry;
1870 case CHECK_CONDITION:
1871 rtn = scsi_check_sense(scmd);
1872 if (rtn == NEEDS_RETRY)
1873 goto maybe_retry;
1874 /* if rtn == FAILED, we have no sense information;
1875 * returning FAILED will wake the error handler thread
1876 * to collect the sense and redo the decide
1877 * disposition */
1878 return rtn;
1879 case CONDITION_GOOD:
1880 case INTERMEDIATE_GOOD:
1881 case INTERMEDIATE_C_GOOD:
1882 case ACA_ACTIVE:
1883 /*
1884 * who knows? FIXME(eric)
1885 */
1886 return SUCCESS;
1887
1888 case RESERVATION_CONFLICT:
1889 sdev_printk(KERN_INFO, scmd->device,
1890 "reservation conflict\n");
1891 set_host_byte(scmd, DID_NEXUS_FAILURE);
1892 return SUCCESS; /* causes immediate i/o error */
1893 default:
1894 return FAILED;
1895 }
1896 return FAILED;
1897
1898maybe_retry:
1899
1900 /* we requeue for retry because the error was retryable, and
1901 * the request was not marked fast fail. Note that above,
1902 * even if the request is marked fast fail, we still requeue
1903 * for queue congestion conditions (QUEUE_FULL or BUSY) */
1904 if ((++scmd->retries) <= scmd->allowed
1905 && !scsi_noretry_cmd(scmd)) {
1906 return NEEDS_RETRY;
1907 } else {
1908 /*
1909 * no more retries - report this one back to upper level.
1910 */
1911 return SUCCESS;
1912 }
1913}
1914
1915static void eh_lock_door_done(struct request *req, blk_status_t status)
1916{
1917 __blk_put_request(req->q, req);
1918}
1919
1920/**
1921 * scsi_eh_lock_door - Prevent medium removal for the specified device
1922 * @sdev: SCSI device to prevent medium removal
1923 *
1924 * Locking:
1925 * We must be called from process context.
1926 *
1927 * Notes:
1928 * We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
1929 * head of the devices request queue, and continue.
1930 */
1931static void scsi_eh_lock_door(struct scsi_device *sdev)
1932{
1933 struct request *req;
1934 struct scsi_request *rq;
1935
1936 /*
1937 * blk_get_request with GFP_KERNEL (__GFP_RECLAIM) sleeps until a
1938 * request becomes available
1939 */
1940 req = blk_get_request(sdev->request_queue, REQ_OP_SCSI_IN, GFP_KERNEL);
1941 if (IS_ERR(req))
1942 return;
1943 rq = scsi_req(req);
1944
1945 rq->cmd[0] = ALLOW_MEDIUM_REMOVAL;
1946 rq->cmd[1] = 0;
1947 rq->cmd[2] = 0;
1948 rq->cmd[3] = 0;
1949 rq->cmd[4] = SCSI_REMOVAL_PREVENT;
1950 rq->cmd[5] = 0;
1951 rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
1952
1953 req->rq_flags |= RQF_QUIET;
1954 req->timeout = 10 * HZ;
1955 rq->retries = 5;
1956
1957 blk_execute_rq_nowait(req->q, NULL, req, 1, eh_lock_door_done);
1958}
1959
1960/**
1961 * scsi_restart_operations - restart io operations to the specified host.
1962 * @shost: Host we are restarting.
1963 *
1964 * Notes:
1965 * When we entered the error handler, we blocked all further i/o to
1966 * this device. we need to 'reverse' this process.
1967 */
1968static void scsi_restart_operations(struct Scsi_Host *shost)
1969{
1970 struct scsi_device *sdev;
1971 unsigned long flags;
1972
1973 /*
1974 * If the door was locked, we need to insert a door lock request
1975 * onto the head of the SCSI request queue for the device. There
1976 * is no point trying to lock the door of an off-line device.
1977 */
1978 shost_for_each_device(sdev, shost) {
1979 if (scsi_device_online(sdev) && sdev->was_reset && sdev->locked) {
1980 scsi_eh_lock_door(sdev);
1981 sdev->was_reset = 0;
1982 }
1983 }
1984
1985 /*
1986 * next free up anything directly waiting upon the host. this
1987 * will be requests for character device operations, and also for
1988 * ioctls to queued block devices.
1989 */
1990 SCSI_LOG_ERROR_RECOVERY(3,
1991 shost_printk(KERN_INFO, shost, "waking up host to restart\n"));
1992
1993 spin_lock_irqsave(shost->host_lock, flags);
1994 if (scsi_host_set_state(shost, SHOST_RUNNING))
1995 if (scsi_host_set_state(shost, SHOST_CANCEL))
1996 BUG_ON(scsi_host_set_state(shost, SHOST_DEL));
1997 spin_unlock_irqrestore(shost->host_lock, flags);
1998
1999 wake_up(&shost->host_wait);
2000
2001 /*
2002 * finally we need to re-initiate requests that may be pending. we will
2003 * have had everything blocked while error handling is taking place, and
2004 * now that error recovery is done, we will need to ensure that these
2005 * requests are started.
2006 */
2007 scsi_run_host_queues(shost);
2008
2009 /*
2010 * if eh is active and host_eh_scheduled is pending we need to re-run
2011 * recovery. we do this check after scsi_run_host_queues() to allow
2012 * everything pent up since the last eh run a chance to make forward
2013 * progress before we sync again. Either we'll immediately re-run
2014 * recovery or scsi_device_unbusy() will wake us again when these
2015 * pending commands complete.
2016 */
2017 spin_lock_irqsave(shost->host_lock, flags);
2018 if (shost->host_eh_scheduled)
2019 if (scsi_host_set_state(shost, SHOST_RECOVERY))
2020 WARN_ON(scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY));
2021 spin_unlock_irqrestore(shost->host_lock, flags);
2022}
2023
2024/**
2025 * scsi_eh_ready_devs - check device ready state and recover if not.
2026 * @shost: host to be recovered.
2027 * @work_q: &list_head for pending commands.
2028 * @done_q: &list_head for processed commands.
2029 */
2030void scsi_eh_ready_devs(struct Scsi_Host *shost,
2031 struct list_head *work_q,
2032 struct list_head *done_q)
2033{
2034 if (!scsi_eh_stu(shost, work_q, done_q))
2035 if (!scsi_eh_bus_device_reset(shost, work_q, done_q))
2036 if (!scsi_eh_target_reset(shost, work_q, done_q))
2037 if (!scsi_eh_bus_reset(shost, work_q, done_q))
2038 if (!scsi_eh_host_reset(shost, work_q, done_q))
2039 scsi_eh_offline_sdevs(work_q,
2040 done_q);
2041}
2042EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
2043
2044/**
2045 * scsi_eh_flush_done_q - finish processed commands or retry them.
2046 * @done_q: list_head of processed commands.
2047 */
2048void scsi_eh_flush_done_q(struct list_head *done_q)
2049{
2050 struct scsi_cmnd *scmd, *next;
2051
2052 list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
2053 list_del_init(&scmd->eh_entry);
2054 if (scsi_device_online(scmd->device) &&
2055 !scsi_noretry_cmd(scmd) &&
2056 (++scmd->retries <= scmd->allowed)) {
2057 SCSI_LOG_ERROR_RECOVERY(3,
2058 scmd_printk(KERN_INFO, scmd,
2059 "%s: flush retry cmd\n",
2060 current->comm));
2061 scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
2062 } else {
2063 /*
2064 * If just we got sense for the device (called
2065 * scsi_eh_get_sense), scmd->result is already
2066 * set, do not set DRIVER_TIMEOUT.
2067 */
2068 if (!scmd->result)
2069 scmd->result |= (DRIVER_TIMEOUT << 24);
2070 SCSI_LOG_ERROR_RECOVERY(3,
2071 scmd_printk(KERN_INFO, scmd,
2072 "%s: flush finish cmd\n",
2073 current->comm));
2074 scsi_finish_command(scmd);
2075 }
2076 }
2077}
2078EXPORT_SYMBOL(scsi_eh_flush_done_q);
2079
2080/**
2081 * scsi_unjam_host - Attempt to fix a host which has a cmd that failed.
2082 * @shost: Host to unjam.
2083 *
2084 * Notes:
2085 * When we come in here, we *know* that all commands on the bus have
2086 * either completed, failed or timed out. we also know that no further
2087 * commands are being sent to the host, so things are relatively quiet
2088 * and we have freedom to fiddle with things as we wish.
2089 *
2090 * This is only the *default* implementation. it is possible for
2091 * individual drivers to supply their own version of this function, and
2092 * if the maintainer wishes to do this, it is strongly suggested that
2093 * this function be taken as a template and modified. this function
2094 * was designed to correctly handle problems for about 95% of the
2095 * different cases out there, and it should always provide at least a
2096 * reasonable amount of error recovery.
2097 *
2098 * Any command marked 'failed' or 'timeout' must eventually have
2099 * scsi_finish_cmd() called for it. we do all of the retry stuff
2100 * here, so when we restart the host after we return it should have an
2101 * empty queue.
2102 */
2103static void scsi_unjam_host(struct Scsi_Host *shost)
2104{
2105 unsigned long flags;
2106 LIST_HEAD(eh_work_q);
2107 LIST_HEAD(eh_done_q);
2108
2109 spin_lock_irqsave(shost->host_lock, flags);
2110 list_splice_init(&shost->eh_cmd_q, &eh_work_q);
2111 spin_unlock_irqrestore(shost->host_lock, flags);
2112
2113 SCSI_LOG_ERROR_RECOVERY(1, scsi_eh_prt_fail_stats(shost, &eh_work_q));
2114
2115 if (!scsi_eh_get_sense(&eh_work_q, &eh_done_q))
2116 scsi_eh_ready_devs(shost, &eh_work_q, &eh_done_q);
2117
2118 spin_lock_irqsave(shost->host_lock, flags);
2119 if (shost->eh_deadline != -1)
2120 shost->last_reset = 0;
2121 spin_unlock_irqrestore(shost->host_lock, flags);
2122 scsi_eh_flush_done_q(&eh_done_q);
2123}
2124
2125/**
2126 * scsi_error_handler - SCSI error handler thread
2127 * @data: Host for which we are running.
2128 *
2129 * Notes:
2130 * This is the main error handling loop. This is run as a kernel thread
2131 * for every SCSI host and handles all error handling activity.
2132 */
2133int scsi_error_handler(void *data)
2134{
2135 struct Scsi_Host *shost = data;
2136
2137 /*
2138 * We use TASK_INTERRUPTIBLE so that the thread is not
2139 * counted against the load average as a running process.
2140 * We never actually get interrupted because kthread_run
2141 * disables signal delivery for the created thread.
2142 */
2143 while (true) {
2144 /*
2145 * The sequence in kthread_stop() sets the stop flag first
2146 * then wakes the process. To avoid missed wakeups, the task
2147 * should always be in a non running state before the stop
2148 * flag is checked
2149 */
2150 set_current_state(TASK_INTERRUPTIBLE);
2151 if (kthread_should_stop())
2152 break;
2153
2154 if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) ||
2155 shost->host_failed != atomic_read(&shost->host_busy)) {
2156 SCSI_LOG_ERROR_RECOVERY(1,
2157 shost_printk(KERN_INFO, shost,
2158 "scsi_eh_%d: sleeping\n",
2159 shost->host_no));
2160 schedule();
2161 continue;
2162 }
2163
2164 __set_current_state(TASK_RUNNING);
2165 SCSI_LOG_ERROR_RECOVERY(1,
2166 shost_printk(KERN_INFO, shost,
2167 "scsi_eh_%d: waking up %d/%d/%d\n",
2168 shost->host_no, shost->host_eh_scheduled,
2169 shost->host_failed,
2170 atomic_read(&shost->host_busy)));
2171
2172 /*
2173 * We have a host that is failing for some reason. Figure out
2174 * what we need to do to get it up and online again (if we can).
2175 * If we fail, we end up taking the thing offline.
2176 */
2177 if (!shost->eh_noresume && scsi_autopm_get_host(shost) != 0) {
2178 SCSI_LOG_ERROR_RECOVERY(1,
2179 shost_printk(KERN_ERR, shost,
2180 "scsi_eh_%d: unable to autoresume\n",
2181 shost->host_no));
2182 continue;
2183 }
2184
2185 if (shost->transportt->eh_strategy_handler)
2186 shost->transportt->eh_strategy_handler(shost);
2187 else
2188 scsi_unjam_host(shost);
2189
2190 /* All scmds have been handled */
2191 shost->host_failed = 0;
2192
2193 /*
2194 * Note - if the above fails completely, the action is to take
2195 * individual devices offline and flush the queue of any
2196 * outstanding requests that may have been pending. When we
2197 * restart, we restart any I/O to any other devices on the bus
2198 * which are still online.
2199 */
2200 scsi_restart_operations(shost);
2201 if (!shost->eh_noresume)
2202 scsi_autopm_put_host(shost);
2203 }
2204 __set_current_state(TASK_RUNNING);
2205
2206 SCSI_LOG_ERROR_RECOVERY(1,
2207 shost_printk(KERN_INFO, shost,
2208 "Error handler scsi_eh_%d exiting\n",
2209 shost->host_no));
2210 shost->ehandler = NULL;
2211 return 0;
2212}
2213
2214/*
2215 * Function: scsi_report_bus_reset()
2216 *
2217 * Purpose: Utility function used by low-level drivers to report that
2218 * they have observed a bus reset on the bus being handled.
2219 *
2220 * Arguments: shost - Host in question
2221 * channel - channel on which reset was observed.
2222 *
2223 * Returns: Nothing
2224 *
2225 * Lock status: Host lock must be held.
2226 *
2227 * Notes: This only needs to be called if the reset is one which
2228 * originates from an unknown location. Resets originated
2229 * by the mid-level itself don't need to call this, but there
2230 * should be no harm.
2231 *
2232 * The main purpose of this is to make sure that a CHECK_CONDITION
2233 * is properly treated.
2234 */
2235void scsi_report_bus_reset(struct Scsi_Host *shost, int channel)
2236{
2237 struct scsi_device *sdev;
2238
2239 __shost_for_each_device(sdev, shost) {
2240 if (channel == sdev_channel(sdev))
2241 __scsi_report_device_reset(sdev, NULL);
2242 }
2243}
2244EXPORT_SYMBOL(scsi_report_bus_reset);
2245
2246/*
2247 * Function: scsi_report_device_reset()
2248 *
2249 * Purpose: Utility function used by low-level drivers to report that
2250 * they have observed a device reset on the device being handled.
2251 *
2252 * Arguments: shost - Host in question
2253 * channel - channel on which reset was observed
2254 * target - target on which reset was observed
2255 *
2256 * Returns: Nothing
2257 *
2258 * Lock status: Host lock must be held
2259 *
2260 * Notes: This only needs to be called if the reset is one which
2261 * originates from an unknown location. Resets originated
2262 * by the mid-level itself don't need to call this, but there
2263 * should be no harm.
2264 *
2265 * The main purpose of this is to make sure that a CHECK_CONDITION
2266 * is properly treated.
2267 */
2268void scsi_report_device_reset(struct Scsi_Host *shost, int channel, int target)
2269{
2270 struct scsi_device *sdev;
2271
2272 __shost_for_each_device(sdev, shost) {
2273 if (channel == sdev_channel(sdev) &&
2274 target == sdev_id(sdev))
2275 __scsi_report_device_reset(sdev, NULL);
2276 }
2277}
2278EXPORT_SYMBOL(scsi_report_device_reset);
2279
2280static void
2281scsi_reset_provider_done_command(struct scsi_cmnd *scmd)
2282{
2283}
2284
2285/**
2286 * scsi_ioctl_reset: explicitly reset a host/bus/target/device
2287 * @dev: scsi_device to operate on
2288 * @arg: reset type (see sg.h)
2289 */
2290int
2291scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
2292{
2293 struct scsi_cmnd *scmd;
2294 struct Scsi_Host *shost = dev->host;
2295 struct request *rq;
2296 unsigned long flags;
2297 int error = 0, rtn, val;
2298
2299 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
2300 return -EACCES;
2301
2302 error = get_user(val, arg);
2303 if (error)
2304 return error;
2305
2306 if (scsi_autopm_get_host(shost) < 0)
2307 return -EIO;
2308
2309 error = -EIO;
2310 rq = kzalloc(sizeof(struct request) + sizeof(struct scsi_cmnd) +
2311 shost->hostt->cmd_size, GFP_KERNEL);
2312 if (!rq)
2313 goto out_put_autopm_host;
2314 blk_rq_init(NULL, rq);
2315
2316 scmd = (struct scsi_cmnd *)(rq + 1);
2317 scsi_init_command(dev, scmd);
2318 scmd->request = rq;
2319 scmd->cmnd = scsi_req(rq)->cmd;
2320
2321 scmd->scsi_done = scsi_reset_provider_done_command;
2322 memset(&scmd->sdb, 0, sizeof(scmd->sdb));
2323
2324 scmd->cmd_len = 0;
2325
2326 scmd->sc_data_direction = DMA_BIDIRECTIONAL;
2327
2328 spin_lock_irqsave(shost->host_lock, flags);
2329 shost->tmf_in_progress = 1;
2330 spin_unlock_irqrestore(shost->host_lock, flags);
2331
2332 switch (val & ~SG_SCSI_RESET_NO_ESCALATE) {
2333 case SG_SCSI_RESET_NOTHING:
2334 rtn = SUCCESS;
2335 break;
2336 case SG_SCSI_RESET_DEVICE:
2337 rtn = scsi_try_bus_device_reset(scmd);
2338 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2339 break;
2340 /* FALLTHROUGH */
2341 case SG_SCSI_RESET_TARGET:
2342 rtn = scsi_try_target_reset(scmd);
2343 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2344 break;
2345 /* FALLTHROUGH */
2346 case SG_SCSI_RESET_BUS:
2347 rtn = scsi_try_bus_reset(scmd);
2348 if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
2349 break;
2350 /* FALLTHROUGH */
2351 case SG_SCSI_RESET_HOST:
2352 rtn = scsi_try_host_reset(scmd);
2353 if (rtn == SUCCESS)
2354 break;
2355 /* FALLTHROUGH */
2356 default:
2357 rtn = FAILED;
2358 break;
2359 }
2360
2361 error = (rtn == SUCCESS) ? 0 : -EIO;
2362
2363 spin_lock_irqsave(shost->host_lock, flags);
2364 shost->tmf_in_progress = 0;
2365 spin_unlock_irqrestore(shost->host_lock, flags);
2366
2367 /*
2368 * be sure to wake up anyone who was sleeping or had their queue
2369 * suspended while we performed the TMF.
2370 */
2371 SCSI_LOG_ERROR_RECOVERY(3,
2372 shost_printk(KERN_INFO, shost,
2373 "waking up host to restart after TMF\n"));
2374
2375 wake_up(&shost->host_wait);
2376 scsi_run_host_queues(shost);
2377
2378 scsi_put_command(scmd);
2379 kfree(rq);
2380
2381out_put_autopm_host:
2382 scsi_autopm_put_host(shost);
2383 return error;
2384}
2385EXPORT_SYMBOL(scsi_ioctl_reset);
2386
2387bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
2388 struct scsi_sense_hdr *sshdr)
2389{
2390 return scsi_normalize_sense(cmd->sense_buffer,
2391 SCSI_SENSE_BUFFERSIZE, sshdr);
2392}
2393EXPORT_SYMBOL(scsi_command_normalize_sense);
2394
2395/**
2396 * scsi_get_sense_info_fld - get information field from sense data (either fixed or descriptor format)
2397 * @sense_buffer: byte array of sense data
2398 * @sb_len: number of valid bytes in sense_buffer
2399 * @info_out: pointer to 64 integer where 8 or 4 byte information
2400 * field will be placed if found.
2401 *
2402 * Return value:
2403 * true if information field found, false if not found.
2404 */
2405bool scsi_get_sense_info_fld(const u8 *sense_buffer, int sb_len,
2406 u64 *info_out)
2407{
2408 const u8 * ucp;
2409
2410 if (sb_len < 7)
2411 return false;
2412 switch (sense_buffer[0] & 0x7f) {
2413 case 0x70:
2414 case 0x71:
2415 if (sense_buffer[0] & 0x80) {
2416 *info_out = get_unaligned_be32(&sense_buffer[3]);
2417 return true;
2418 }
2419 return false;
2420 case 0x72:
2421 case 0x73:
2422 ucp = scsi_sense_desc_find(sense_buffer, sb_len,
2423 0 /* info desc */);
2424 if (ucp && (0xa == ucp[1])) {
2425 *info_out = get_unaligned_be64(&ucp[4]);
2426 return true;
2427 }
2428 return false;
2429 default:
2430 return false;
2431 }
2432}
2433EXPORT_SYMBOL(scsi_get_sense_info_fld);