Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/***************************************************************************
3 *
4 * Copyright (C) 2004-2008 SMSC
5 * Copyright (C) 2005-2008 ARM
6 *
7 ***************************************************************************
8 * Rewritten, heavily based on smsc911x simple driver by SMSC.
9 * Partly uses io macros from smc91x.c by Nicolas Pitre
10 *
11 * Supported devices:
12 * LAN9115, LAN9116, LAN9117, LAN9118
13 * LAN9215, LAN9216, LAN9217, LAN9218
14 * LAN9210, LAN9211
15 * LAN9220, LAN9221
16 * LAN89218,LAN9250
17 */
18
19#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20
21#include <linux/crc32.h>
22#include <linux/clk.h>
23#include <linux/delay.h>
24#include <linux/errno.h>
25#include <linux/etherdevice.h>
26#include <linux/ethtool.h>
27#include <linux/init.h>
28#include <linux/interrupt.h>
29#include <linux/ioport.h>
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/netdevice.h>
33#include <linux/platform_device.h>
34#include <linux/regulator/consumer.h>
35#include <linux/sched.h>
36#include <linux/timer.h>
37#include <linux/bug.h>
38#include <linux/bitops.h>
39#include <linux/irq.h>
40#include <linux/io.h>
41#include <linux/swab.h>
42#include <linux/phy.h>
43#include <linux/smsc911x.h>
44#include <linux/device.h>
45#include <linux/of.h>
46#include <linux/of_gpio.h>
47#include <linux/of_net.h>
48#include <linux/acpi.h>
49#include <linux/pm_runtime.h>
50#include <linux/property.h>
51#include <linux/gpio/consumer.h>
52
53#include "smsc911x.h"
54
55#define SMSC_CHIPNAME "smsc911x"
56#define SMSC_MDIONAME "smsc911x-mdio"
57#define SMSC_DRV_VERSION "2008-10-21"
58
59MODULE_LICENSE("GPL");
60MODULE_VERSION(SMSC_DRV_VERSION);
61MODULE_ALIAS("platform:smsc911x");
62
63#if USE_DEBUG > 0
64static int debug = 16;
65#else
66static int debug = 3;
67#endif
68
69module_param(debug, int, 0);
70MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
71
72struct smsc911x_data;
73
74struct smsc911x_ops {
75 u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg);
76 void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val);
77 void (*rx_readfifo)(struct smsc911x_data *pdata,
78 unsigned int *buf, unsigned int wordcount);
79 void (*tx_writefifo)(struct smsc911x_data *pdata,
80 unsigned int *buf, unsigned int wordcount);
81};
82
83#define SMSC911X_NUM_SUPPLIES 2
84
85struct smsc911x_data {
86 void __iomem *ioaddr;
87
88 unsigned int idrev;
89
90 /* used to decide which workarounds apply */
91 unsigned int generation;
92
93 /* device configuration (copied from platform_data during probe) */
94 struct smsc911x_platform_config config;
95
96 /* This needs to be acquired before calling any of below:
97 * smsc911x_mac_read(), smsc911x_mac_write()
98 */
99 spinlock_t mac_lock;
100
101 /* spinlock to ensure register accesses are serialised */
102 spinlock_t dev_lock;
103
104 struct mii_bus *mii_bus;
105 unsigned int using_extphy;
106 int last_duplex;
107 int last_carrier;
108
109 u32 msg_enable;
110 unsigned int gpio_setting;
111 unsigned int gpio_orig_setting;
112 struct net_device *dev;
113 struct napi_struct napi;
114
115 unsigned int software_irq_signal;
116
117#ifdef USE_PHY_WORK_AROUND
118#define MIN_PACKET_SIZE (64)
119 char loopback_tx_pkt[MIN_PACKET_SIZE];
120 char loopback_rx_pkt[MIN_PACKET_SIZE];
121 unsigned int resetcount;
122#endif
123
124 /* Members for Multicast filter workaround */
125 unsigned int multicast_update_pending;
126 unsigned int set_bits_mask;
127 unsigned int clear_bits_mask;
128 unsigned int hashhi;
129 unsigned int hashlo;
130
131 /* register access functions */
132 const struct smsc911x_ops *ops;
133
134 /* regulators */
135 struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES];
136
137 /* Reset GPIO */
138 struct gpio_desc *reset_gpiod;
139
140 /* clock */
141 struct clk *clk;
142};
143
144/* Easy access to information */
145#define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift))
146
147static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
148{
149 if (pdata->config.flags & SMSC911X_USE_32BIT)
150 return readl(pdata->ioaddr + reg);
151
152 if (pdata->config.flags & SMSC911X_USE_16BIT)
153 return ((readw(pdata->ioaddr + reg) & 0xFFFF) |
154 ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16));
155
156 BUG();
157 return 0;
158}
159
160static inline u32
161__smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg)
162{
163 if (pdata->config.flags & SMSC911X_USE_32BIT)
164 return readl(pdata->ioaddr + __smsc_shift(pdata, reg));
165
166 if (pdata->config.flags & SMSC911X_USE_16BIT)
167 return (readw(pdata->ioaddr +
168 __smsc_shift(pdata, reg)) & 0xFFFF) |
169 ((readw(pdata->ioaddr +
170 __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16);
171
172 BUG();
173 return 0;
174}
175
176static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
177{
178 u32 data;
179 unsigned long flags;
180
181 spin_lock_irqsave(&pdata->dev_lock, flags);
182 data = pdata->ops->reg_read(pdata, reg);
183 spin_unlock_irqrestore(&pdata->dev_lock, flags);
184
185 return data;
186}
187
188static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
189 u32 val)
190{
191 if (pdata->config.flags & SMSC911X_USE_32BIT) {
192 writel(val, pdata->ioaddr + reg);
193 return;
194 }
195
196 if (pdata->config.flags & SMSC911X_USE_16BIT) {
197 writew(val & 0xFFFF, pdata->ioaddr + reg);
198 writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2);
199 return;
200 }
201
202 BUG();
203}
204
205static inline void
206__smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val)
207{
208 if (pdata->config.flags & SMSC911X_USE_32BIT) {
209 writel(val, pdata->ioaddr + __smsc_shift(pdata, reg));
210 return;
211 }
212
213 if (pdata->config.flags & SMSC911X_USE_16BIT) {
214 writew(val & 0xFFFF,
215 pdata->ioaddr + __smsc_shift(pdata, reg));
216 writew((val >> 16) & 0xFFFF,
217 pdata->ioaddr + __smsc_shift(pdata, reg + 2));
218 return;
219 }
220
221 BUG();
222}
223
224static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
225 u32 val)
226{
227 unsigned long flags;
228
229 spin_lock_irqsave(&pdata->dev_lock, flags);
230 pdata->ops->reg_write(pdata, reg, val);
231 spin_unlock_irqrestore(&pdata->dev_lock, flags);
232}
233
234/* Writes a packet to the TX_DATA_FIFO */
235static inline void
236smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
237 unsigned int wordcount)
238{
239 unsigned long flags;
240
241 spin_lock_irqsave(&pdata->dev_lock, flags);
242
243 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
244 while (wordcount--)
245 __smsc911x_reg_write(pdata, TX_DATA_FIFO,
246 swab32(*buf++));
247 goto out;
248 }
249
250 if (pdata->config.flags & SMSC911X_USE_32BIT) {
251 iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
252 goto out;
253 }
254
255 if (pdata->config.flags & SMSC911X_USE_16BIT) {
256 while (wordcount--)
257 __smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++);
258 goto out;
259 }
260
261 BUG();
262out:
263 spin_unlock_irqrestore(&pdata->dev_lock, flags);
264}
265
266/* Writes a packet to the TX_DATA_FIFO - shifted version */
267static inline void
268smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
269 unsigned int wordcount)
270{
271 unsigned long flags;
272
273 spin_lock_irqsave(&pdata->dev_lock, flags);
274
275 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
276 while (wordcount--)
277 __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO,
278 swab32(*buf++));
279 goto out;
280 }
281
282 if (pdata->config.flags & SMSC911X_USE_32BIT) {
283 iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata,
284 TX_DATA_FIFO), buf, wordcount);
285 goto out;
286 }
287
288 if (pdata->config.flags & SMSC911X_USE_16BIT) {
289 while (wordcount--)
290 __smsc911x_reg_write_shift(pdata,
291 TX_DATA_FIFO, *buf++);
292 goto out;
293 }
294
295 BUG();
296out:
297 spin_unlock_irqrestore(&pdata->dev_lock, flags);
298}
299
300/* Reads a packet out of the RX_DATA_FIFO */
301static inline void
302smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
303 unsigned int wordcount)
304{
305 unsigned long flags;
306
307 spin_lock_irqsave(&pdata->dev_lock, flags);
308
309 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
310 while (wordcount--)
311 *buf++ = swab32(__smsc911x_reg_read(pdata,
312 RX_DATA_FIFO));
313 goto out;
314 }
315
316 if (pdata->config.flags & SMSC911X_USE_32BIT) {
317 ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
318 goto out;
319 }
320
321 if (pdata->config.flags & SMSC911X_USE_16BIT) {
322 while (wordcount--)
323 *buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO);
324 goto out;
325 }
326
327 BUG();
328out:
329 spin_unlock_irqrestore(&pdata->dev_lock, flags);
330}
331
332/* Reads a packet out of the RX_DATA_FIFO - shifted version */
333static inline void
334smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
335 unsigned int wordcount)
336{
337 unsigned long flags;
338
339 spin_lock_irqsave(&pdata->dev_lock, flags);
340
341 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
342 while (wordcount--)
343 *buf++ = swab32(__smsc911x_reg_read_shift(pdata,
344 RX_DATA_FIFO));
345 goto out;
346 }
347
348 if (pdata->config.flags & SMSC911X_USE_32BIT) {
349 ioread32_rep(pdata->ioaddr + __smsc_shift(pdata,
350 RX_DATA_FIFO), buf, wordcount);
351 goto out;
352 }
353
354 if (pdata->config.flags & SMSC911X_USE_16BIT) {
355 while (wordcount--)
356 *buf++ = __smsc911x_reg_read_shift(pdata,
357 RX_DATA_FIFO);
358 goto out;
359 }
360
361 BUG();
362out:
363 spin_unlock_irqrestore(&pdata->dev_lock, flags);
364}
365
366/*
367 * enable regulator and clock resources.
368 */
369static int smsc911x_enable_resources(struct platform_device *pdev)
370{
371 struct net_device *ndev = platform_get_drvdata(pdev);
372 struct smsc911x_data *pdata = netdev_priv(ndev);
373 int ret = 0;
374
375 ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies),
376 pdata->supplies);
377 if (ret)
378 netdev_err(ndev, "failed to enable regulators %d\n",
379 ret);
380
381 if (!IS_ERR(pdata->clk)) {
382 ret = clk_prepare_enable(pdata->clk);
383 if (ret < 0)
384 netdev_err(ndev, "failed to enable clock %d\n", ret);
385 }
386
387 return ret;
388}
389
390/*
391 * disable resources, currently just regulators.
392 */
393static int smsc911x_disable_resources(struct platform_device *pdev)
394{
395 struct net_device *ndev = platform_get_drvdata(pdev);
396 struct smsc911x_data *pdata = netdev_priv(ndev);
397 int ret = 0;
398
399 ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies),
400 pdata->supplies);
401
402 if (!IS_ERR(pdata->clk))
403 clk_disable_unprepare(pdata->clk);
404
405 return ret;
406}
407
408/*
409 * Request resources, currently just regulators.
410 *
411 * The SMSC911x has two power pins: vddvario and vdd33a, in designs where
412 * these are not always-on we need to request regulators to be turned on
413 * before we can try to access the device registers.
414 */
415static int smsc911x_request_resources(struct platform_device *pdev)
416{
417 struct net_device *ndev = platform_get_drvdata(pdev);
418 struct smsc911x_data *pdata = netdev_priv(ndev);
419 int ret = 0;
420
421 /* Request regulators */
422 pdata->supplies[0].supply = "vdd33a";
423 pdata->supplies[1].supply = "vddvario";
424 ret = regulator_bulk_get(&pdev->dev,
425 ARRAY_SIZE(pdata->supplies),
426 pdata->supplies);
427 if (ret) {
428 /*
429 * Retry on deferrals, else just report the error
430 * and try to continue.
431 */
432 if (ret == -EPROBE_DEFER)
433 return ret;
434 netdev_err(ndev, "couldn't get regulators %d\n",
435 ret);
436 }
437
438 /* Request optional RESET GPIO */
439 pdata->reset_gpiod = devm_gpiod_get_optional(&pdev->dev,
440 "reset",
441 GPIOD_OUT_LOW);
442
443 /* Request clock */
444 pdata->clk = clk_get(&pdev->dev, NULL);
445 if (IS_ERR(pdata->clk))
446 dev_dbg(&pdev->dev, "couldn't get clock %li\n",
447 PTR_ERR(pdata->clk));
448
449 return ret;
450}
451
452/*
453 * Free resources, currently just regulators.
454 *
455 */
456static void smsc911x_free_resources(struct platform_device *pdev)
457{
458 struct net_device *ndev = platform_get_drvdata(pdev);
459 struct smsc911x_data *pdata = netdev_priv(ndev);
460
461 /* Free regulators */
462 regulator_bulk_free(ARRAY_SIZE(pdata->supplies),
463 pdata->supplies);
464
465 /* Free clock */
466 if (!IS_ERR(pdata->clk)) {
467 clk_put(pdata->clk);
468 pdata->clk = NULL;
469 }
470}
471
472/* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read
473 * and smsc911x_mac_write, so assumes mac_lock is held */
474static int smsc911x_mac_complete(struct smsc911x_data *pdata)
475{
476 int i;
477 u32 val;
478
479 SMSC_ASSERT_MAC_LOCK(pdata);
480
481 for (i = 0; i < 40; i++) {
482 val = smsc911x_reg_read(pdata, MAC_CSR_CMD);
483 if (!(val & MAC_CSR_CMD_CSR_BUSY_))
484 return 0;
485 }
486 SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. "
487 "MAC_CSR_CMD: 0x%08X", val);
488 return -EIO;
489}
490
491/* Fetches a MAC register value. Assumes mac_lock is acquired */
492static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset)
493{
494 unsigned int temp;
495
496 SMSC_ASSERT_MAC_LOCK(pdata);
497
498 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
499 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
500 SMSC_WARN(pdata, hw, "MAC busy at entry");
501 return 0xFFFFFFFF;
502 }
503
504 /* Send the MAC cmd */
505 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
506 MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_));
507
508 /* Workaround for hardware read-after-write restriction */
509 temp = smsc911x_reg_read(pdata, BYTE_TEST);
510
511 /* Wait for the read to complete */
512 if (likely(smsc911x_mac_complete(pdata) == 0))
513 return smsc911x_reg_read(pdata, MAC_CSR_DATA);
514
515 SMSC_WARN(pdata, hw, "MAC busy after read");
516 return 0xFFFFFFFF;
517}
518
519/* Set a mac register, mac_lock must be acquired before calling */
520static void smsc911x_mac_write(struct smsc911x_data *pdata,
521 unsigned int offset, u32 val)
522{
523 unsigned int temp;
524
525 SMSC_ASSERT_MAC_LOCK(pdata);
526
527 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
528 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
529 SMSC_WARN(pdata, hw,
530 "smsc911x_mac_write failed, MAC busy at entry");
531 return;
532 }
533
534 /* Send data to write */
535 smsc911x_reg_write(pdata, MAC_CSR_DATA, val);
536
537 /* Write the actual data */
538 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
539 MAC_CSR_CMD_CSR_BUSY_));
540
541 /* Workaround for hardware read-after-write restriction */
542 temp = smsc911x_reg_read(pdata, BYTE_TEST);
543
544 /* Wait for the write to complete */
545 if (likely(smsc911x_mac_complete(pdata) == 0))
546 return;
547
548 SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write");
549}
550
551/* Get a phy register */
552static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
553{
554 struct smsc911x_data *pdata = bus->priv;
555 unsigned long flags;
556 unsigned int addr;
557 int i, reg;
558
559 pm_runtime_get_sync(bus->parent);
560 spin_lock_irqsave(&pdata->mac_lock, flags);
561
562 /* Confirm MII not busy */
563 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
564 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???");
565 reg = -EIO;
566 goto out;
567 }
568
569 /* Set the address, index & direction (read from PHY) */
570 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6);
571 smsc911x_mac_write(pdata, MII_ACC, addr);
572
573 /* Wait for read to complete w/ timeout */
574 for (i = 0; i < 100; i++)
575 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
576 reg = smsc911x_mac_read(pdata, MII_DATA);
577 goto out;
578 }
579
580 SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish");
581 reg = -EIO;
582
583out:
584 spin_unlock_irqrestore(&pdata->mac_lock, flags);
585 pm_runtime_put(bus->parent);
586 return reg;
587}
588
589/* Set a phy register */
590static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
591 u16 val)
592{
593 struct smsc911x_data *pdata = bus->priv;
594 unsigned long flags;
595 unsigned int addr;
596 int i, reg;
597
598 pm_runtime_get_sync(bus->parent);
599 spin_lock_irqsave(&pdata->mac_lock, flags);
600
601 /* Confirm MII not busy */
602 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
603 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???");
604 reg = -EIO;
605 goto out;
606 }
607
608 /* Put the data to write in the MAC */
609 smsc911x_mac_write(pdata, MII_DATA, val);
610
611 /* Set the address, index & direction (write to PHY) */
612 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) |
613 MII_ACC_MII_WRITE_;
614 smsc911x_mac_write(pdata, MII_ACC, addr);
615
616 /* Wait for write to complete w/ timeout */
617 for (i = 0; i < 100; i++)
618 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
619 reg = 0;
620 goto out;
621 }
622
623 SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish");
624 reg = -EIO;
625
626out:
627 spin_unlock_irqrestore(&pdata->mac_lock, flags);
628 pm_runtime_put(bus->parent);
629 return reg;
630}
631
632/* Switch to external phy. Assumes tx and rx are stopped. */
633static void smsc911x_phy_enable_external(struct smsc911x_data *pdata)
634{
635 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
636
637 /* Disable phy clocks to the MAC */
638 hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
639 hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
640 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
641 udelay(10); /* Enough time for clocks to stop */
642
643 /* Switch to external phy */
644 hwcfg |= HW_CFG_EXT_PHY_EN_;
645 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
646
647 /* Enable phy clocks to the MAC */
648 hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
649 hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
650 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
651 udelay(10); /* Enough time for clocks to restart */
652
653 hwcfg |= HW_CFG_SMI_SEL_;
654 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
655}
656
657/* Autodetects and enables external phy if present on supported chips.
658 * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY
659 * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */
660static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
661{
662 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
663
664 if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
665 SMSC_TRACE(pdata, hw, "Forcing internal PHY");
666 pdata->using_extphy = 0;
667 } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
668 SMSC_TRACE(pdata, hw, "Forcing external PHY");
669 smsc911x_phy_enable_external(pdata);
670 pdata->using_extphy = 1;
671 } else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
672 SMSC_TRACE(pdata, hw,
673 "HW_CFG EXT_PHY_DET set, using external PHY");
674 smsc911x_phy_enable_external(pdata);
675 pdata->using_extphy = 1;
676 } else {
677 SMSC_TRACE(pdata, hw,
678 "HW_CFG EXT_PHY_DET clear, using internal PHY");
679 pdata->using_extphy = 0;
680 }
681}
682
683/* Fetches a tx status out of the status fifo */
684static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata)
685{
686 unsigned int result =
687 smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_;
688
689 if (result != 0)
690 result = smsc911x_reg_read(pdata, TX_STATUS_FIFO);
691
692 return result;
693}
694
695/* Fetches the next rx status */
696static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata)
697{
698 unsigned int result =
699 smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_;
700
701 if (result != 0)
702 result = smsc911x_reg_read(pdata, RX_STATUS_FIFO);
703
704 return result;
705}
706
707#ifdef USE_PHY_WORK_AROUND
708static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
709{
710 unsigned int tries;
711 u32 wrsz;
712 u32 rdsz;
713 ulong bufp;
714
715 for (tries = 0; tries < 10; tries++) {
716 unsigned int txcmd_a;
717 unsigned int txcmd_b;
718 unsigned int status;
719 unsigned int pktlength;
720 unsigned int i;
721
722 /* Zero-out rx packet memory */
723 memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE);
724
725 /* Write tx packet to 118 */
726 txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16;
727 txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
728 txcmd_a |= MIN_PACKET_SIZE;
729
730 txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE;
731
732 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a);
733 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b);
734
735 bufp = (ulong)pdata->loopback_tx_pkt & (~0x3);
736 wrsz = MIN_PACKET_SIZE + 3;
737 wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3);
738 wrsz >>= 2;
739
740 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
741
742 /* Wait till transmit is done */
743 i = 60;
744 do {
745 udelay(5);
746 status = smsc911x_tx_get_txstatus(pdata);
747 } while ((i--) && (!status));
748
749 if (!status) {
750 SMSC_WARN(pdata, hw,
751 "Failed to transmit during loopback test");
752 continue;
753 }
754 if (status & TX_STS_ES_) {
755 SMSC_WARN(pdata, hw,
756 "Transmit encountered errors during loopback test");
757 continue;
758 }
759
760 /* Wait till receive is done */
761 i = 60;
762 do {
763 udelay(5);
764 status = smsc911x_rx_get_rxstatus(pdata);
765 } while ((i--) && (!status));
766
767 if (!status) {
768 SMSC_WARN(pdata, hw,
769 "Failed to receive during loopback test");
770 continue;
771 }
772 if (status & RX_STS_ES_) {
773 SMSC_WARN(pdata, hw,
774 "Receive encountered errors during loopback test");
775 continue;
776 }
777
778 pktlength = ((status & 0x3FFF0000UL) >> 16);
779 bufp = (ulong)pdata->loopback_rx_pkt;
780 rdsz = pktlength + 3;
781 rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3);
782 rdsz >>= 2;
783
784 pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
785
786 if (pktlength != (MIN_PACKET_SIZE + 4)) {
787 SMSC_WARN(pdata, hw, "Unexpected packet size "
788 "during loop back test, size=%d, will retry",
789 pktlength);
790 } else {
791 unsigned int j;
792 int mismatch = 0;
793 for (j = 0; j < MIN_PACKET_SIZE; j++) {
794 if (pdata->loopback_tx_pkt[j]
795 != pdata->loopback_rx_pkt[j]) {
796 mismatch = 1;
797 break;
798 }
799 }
800 if (!mismatch) {
801 SMSC_TRACE(pdata, hw, "Successfully verified "
802 "loopback packet");
803 return 0;
804 } else {
805 SMSC_WARN(pdata, hw, "Data mismatch "
806 "during loop back test, will retry");
807 }
808 }
809 }
810
811 return -EIO;
812}
813
814static int smsc911x_phy_reset(struct smsc911x_data *pdata)
815{
816 unsigned int temp;
817 unsigned int i = 100000;
818
819 temp = smsc911x_reg_read(pdata, PMT_CTRL);
820 smsc911x_reg_write(pdata, PMT_CTRL, temp | PMT_CTRL_PHY_RST_);
821 do {
822 msleep(1);
823 temp = smsc911x_reg_read(pdata, PMT_CTRL);
824 } while ((i--) && (temp & PMT_CTRL_PHY_RST_));
825
826 if (unlikely(temp & PMT_CTRL_PHY_RST_)) {
827 SMSC_WARN(pdata, hw, "PHY reset failed to complete");
828 return -EIO;
829 }
830 /* Extra delay required because the phy may not be completed with
831 * its reset when BMCR_RESET is cleared. Specs say 256 uS is
832 * enough delay but using 1ms here to be safe */
833 msleep(1);
834
835 return 0;
836}
837
838static int smsc911x_phy_loopbacktest(struct net_device *dev)
839{
840 struct smsc911x_data *pdata = netdev_priv(dev);
841 struct phy_device *phy_dev = dev->phydev;
842 int result = -EIO;
843 unsigned int i, val;
844 unsigned long flags;
845
846 /* Initialise tx packet using broadcast destination address */
847 eth_broadcast_addr(pdata->loopback_tx_pkt);
848
849 /* Use incrementing source address */
850 for (i = 6; i < 12; i++)
851 pdata->loopback_tx_pkt[i] = (char)i;
852
853 /* Set length type field */
854 pdata->loopback_tx_pkt[12] = 0x00;
855 pdata->loopback_tx_pkt[13] = 0x00;
856
857 for (i = 14; i < MIN_PACKET_SIZE; i++)
858 pdata->loopback_tx_pkt[i] = (char)i;
859
860 val = smsc911x_reg_read(pdata, HW_CFG);
861 val &= HW_CFG_TX_FIF_SZ_;
862 val |= HW_CFG_SF_;
863 smsc911x_reg_write(pdata, HW_CFG, val);
864
865 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
866 smsc911x_reg_write(pdata, RX_CFG,
867 (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8);
868
869 for (i = 0; i < 10; i++) {
870 /* Set PHY to 10/FD, no ANEG, and loopback mode */
871 smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr,
872 MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX);
873
874 /* Enable MAC tx/rx, FD */
875 spin_lock_irqsave(&pdata->mac_lock, flags);
876 smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_
877 | MAC_CR_TXEN_ | MAC_CR_RXEN_);
878 spin_unlock_irqrestore(&pdata->mac_lock, flags);
879
880 if (smsc911x_phy_check_loopbackpkt(pdata) == 0) {
881 result = 0;
882 break;
883 }
884 pdata->resetcount++;
885
886 /* Disable MAC rx */
887 spin_lock_irqsave(&pdata->mac_lock, flags);
888 smsc911x_mac_write(pdata, MAC_CR, 0);
889 spin_unlock_irqrestore(&pdata->mac_lock, flags);
890
891 smsc911x_phy_reset(pdata);
892 }
893
894 /* Disable MAC */
895 spin_lock_irqsave(&pdata->mac_lock, flags);
896 smsc911x_mac_write(pdata, MAC_CR, 0);
897 spin_unlock_irqrestore(&pdata->mac_lock, flags);
898
899 /* Cancel PHY loopback mode */
900 smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr, MII_BMCR, 0);
901
902 smsc911x_reg_write(pdata, TX_CFG, 0);
903 smsc911x_reg_write(pdata, RX_CFG, 0);
904
905 return result;
906}
907#endif /* USE_PHY_WORK_AROUND */
908
909static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata)
910{
911 struct net_device *ndev = pdata->dev;
912 struct phy_device *phy_dev = ndev->phydev;
913 u32 afc = smsc911x_reg_read(pdata, AFC_CFG);
914 u32 flow;
915 unsigned long flags;
916
917 if (phy_dev->duplex == DUPLEX_FULL) {
918 u16 lcladv = phy_read(phy_dev, MII_ADVERTISE);
919 u16 rmtadv = phy_read(phy_dev, MII_LPA);
920 u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
921
922 if (cap & FLOW_CTRL_RX)
923 flow = 0xFFFF0002;
924 else
925 flow = 0;
926
927 if (cap & FLOW_CTRL_TX)
928 afc |= 0xF;
929 else
930 afc &= ~0xF;
931
932 SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s",
933 (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
934 (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
935 } else {
936 SMSC_TRACE(pdata, hw, "half duplex");
937 flow = 0;
938 afc |= 0xF;
939 }
940
941 spin_lock_irqsave(&pdata->mac_lock, flags);
942 smsc911x_mac_write(pdata, FLOW, flow);
943 spin_unlock_irqrestore(&pdata->mac_lock, flags);
944
945 smsc911x_reg_write(pdata, AFC_CFG, afc);
946}
947
948/* Update link mode if anything has changed. Called periodically when the
949 * PHY is in polling mode, even if nothing has changed. */
950static void smsc911x_phy_adjust_link(struct net_device *dev)
951{
952 struct smsc911x_data *pdata = netdev_priv(dev);
953 struct phy_device *phy_dev = dev->phydev;
954 unsigned long flags;
955 int carrier;
956
957 if (phy_dev->duplex != pdata->last_duplex) {
958 unsigned int mac_cr;
959 SMSC_TRACE(pdata, hw, "duplex state has changed");
960
961 spin_lock_irqsave(&pdata->mac_lock, flags);
962 mac_cr = smsc911x_mac_read(pdata, MAC_CR);
963 if (phy_dev->duplex) {
964 SMSC_TRACE(pdata, hw,
965 "configuring for full duplex mode");
966 mac_cr |= MAC_CR_FDPX_;
967 } else {
968 SMSC_TRACE(pdata, hw,
969 "configuring for half duplex mode");
970 mac_cr &= ~MAC_CR_FDPX_;
971 }
972 smsc911x_mac_write(pdata, MAC_CR, mac_cr);
973 spin_unlock_irqrestore(&pdata->mac_lock, flags);
974
975 smsc911x_phy_update_flowcontrol(pdata);
976 pdata->last_duplex = phy_dev->duplex;
977 }
978
979 carrier = netif_carrier_ok(dev);
980 if (carrier != pdata->last_carrier) {
981 SMSC_TRACE(pdata, hw, "carrier state has changed");
982 if (carrier) {
983 SMSC_TRACE(pdata, hw, "configuring for carrier OK");
984 if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
985 (!pdata->using_extphy)) {
986 /* Restore original GPIO configuration */
987 pdata->gpio_setting = pdata->gpio_orig_setting;
988 smsc911x_reg_write(pdata, GPIO_CFG,
989 pdata->gpio_setting);
990 }
991 } else {
992 SMSC_TRACE(pdata, hw, "configuring for no carrier");
993 /* Check global setting that LED1
994 * usage is 10/100 indicator */
995 pdata->gpio_setting = smsc911x_reg_read(pdata,
996 GPIO_CFG);
997 if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) &&
998 (!pdata->using_extphy)) {
999 /* Force 10/100 LED off, after saving
1000 * original GPIO configuration */
1001 pdata->gpio_orig_setting = pdata->gpio_setting;
1002
1003 pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_;
1004 pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_
1005 | GPIO_CFG_GPIODIR0_
1006 | GPIO_CFG_GPIOD0_);
1007 smsc911x_reg_write(pdata, GPIO_CFG,
1008 pdata->gpio_setting);
1009 }
1010 }
1011 pdata->last_carrier = carrier;
1012 }
1013}
1014
1015static int smsc911x_mii_probe(struct net_device *dev)
1016{
1017 struct smsc911x_data *pdata = netdev_priv(dev);
1018 struct phy_device *phydev;
1019 int ret;
1020
1021 /* find the first phy */
1022 phydev = phy_find_first(pdata->mii_bus);
1023 if (!phydev) {
1024 netdev_err(dev, "no PHY found\n");
1025 return -ENODEV;
1026 }
1027
1028 SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X",
1029 phydev->mdio.addr, phydev->phy_id);
1030
1031 ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link,
1032 pdata->config.phy_interface);
1033
1034 if (ret) {
1035 netdev_err(dev, "Could not attach to PHY\n");
1036 return ret;
1037 }
1038
1039 phy_attached_info(phydev);
1040
1041 phy_set_max_speed(phydev, SPEED_100);
1042
1043 /* mask with MAC supported features */
1044 phy_support_asym_pause(phydev);
1045
1046 pdata->last_duplex = -1;
1047 pdata->last_carrier = -1;
1048
1049#ifdef USE_PHY_WORK_AROUND
1050 if (smsc911x_phy_loopbacktest(dev) < 0) {
1051 SMSC_WARN(pdata, hw, "Failed Loop Back Test");
1052 phy_disconnect(phydev);
1053 return -ENODEV;
1054 }
1055 SMSC_TRACE(pdata, hw, "Passed Loop Back Test");
1056#endif /* USE_PHY_WORK_AROUND */
1057
1058 SMSC_TRACE(pdata, hw, "phy initialised successfully");
1059 return 0;
1060}
1061
1062static int smsc911x_mii_init(struct platform_device *pdev,
1063 struct net_device *dev)
1064{
1065 struct smsc911x_data *pdata = netdev_priv(dev);
1066 struct phy_device *phydev;
1067 int err = -ENXIO;
1068
1069 pdata->mii_bus = mdiobus_alloc();
1070 if (!pdata->mii_bus) {
1071 err = -ENOMEM;
1072 goto err_out_1;
1073 }
1074
1075 pdata->mii_bus->name = SMSC_MDIONAME;
1076 snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
1077 pdev->name, pdev->id);
1078 pdata->mii_bus->priv = pdata;
1079 pdata->mii_bus->read = smsc911x_mii_read;
1080 pdata->mii_bus->write = smsc911x_mii_write;
1081
1082 pdata->mii_bus->parent = &pdev->dev;
1083
1084 switch (pdata->idrev & 0xFFFF0000) {
1085 case 0x01170000:
1086 case 0x01150000:
1087 case 0x117A0000:
1088 case 0x115A0000:
1089 /* External PHY supported, try to autodetect */
1090 smsc911x_phy_initialise_external(pdata);
1091 break;
1092 default:
1093 SMSC_TRACE(pdata, hw, "External PHY is not supported, "
1094 "using internal PHY");
1095 pdata->using_extphy = 0;
1096 break;
1097 }
1098
1099 if (!pdata->using_extphy) {
1100 /* Mask all PHYs except ID 1 (internal) */
1101 pdata->mii_bus->phy_mask = ~(1 << 1);
1102 }
1103
1104 if (mdiobus_register(pdata->mii_bus)) {
1105 SMSC_WARN(pdata, probe, "Error registering mii bus");
1106 goto err_out_free_bus_2;
1107 }
1108
1109 phydev = phy_find_first(pdata->mii_bus);
1110 if (phydev)
1111 phydev->mac_managed_pm = true;
1112
1113 return 0;
1114
1115err_out_free_bus_2:
1116 mdiobus_free(pdata->mii_bus);
1117err_out_1:
1118 return err;
1119}
1120
1121/* Gets the number of tx statuses in the fifo */
1122static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata)
1123{
1124 return (smsc911x_reg_read(pdata, TX_FIFO_INF)
1125 & TX_FIFO_INF_TSUSED_) >> 16;
1126}
1127
1128/* Reads tx statuses and increments counters where necessary */
1129static void smsc911x_tx_update_txcounters(struct net_device *dev)
1130{
1131 struct smsc911x_data *pdata = netdev_priv(dev);
1132 unsigned int tx_stat;
1133
1134 while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) {
1135 if (unlikely(tx_stat & 0x80000000)) {
1136 /* In this driver the packet tag is used as the packet
1137 * length. Since a packet length can never reach the
1138 * size of 0x8000, this bit is reserved. It is worth
1139 * noting that the "reserved bit" in the warning above
1140 * does not reference a hardware defined reserved bit
1141 * but rather a driver defined one.
1142 */
1143 SMSC_WARN(pdata, hw, "Packet tag reserved bit is high");
1144 } else {
1145 if (unlikely(tx_stat & TX_STS_ES_)) {
1146 dev->stats.tx_errors++;
1147 } else {
1148 dev->stats.tx_packets++;
1149 dev->stats.tx_bytes += (tx_stat >> 16);
1150 }
1151 if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) {
1152 dev->stats.collisions += 16;
1153 dev->stats.tx_aborted_errors += 1;
1154 } else {
1155 dev->stats.collisions +=
1156 ((tx_stat >> 3) & 0xF);
1157 }
1158 if (unlikely(tx_stat & TX_STS_LOST_CARRIER_))
1159 dev->stats.tx_carrier_errors += 1;
1160 if (unlikely(tx_stat & TX_STS_LATE_COL_)) {
1161 dev->stats.collisions++;
1162 dev->stats.tx_aborted_errors++;
1163 }
1164 }
1165 }
1166}
1167
1168/* Increments the Rx error counters */
1169static void
1170smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat)
1171{
1172 int crc_err = 0;
1173
1174 if (unlikely(rxstat & RX_STS_ES_)) {
1175 dev->stats.rx_errors++;
1176 if (unlikely(rxstat & RX_STS_CRC_ERR_)) {
1177 dev->stats.rx_crc_errors++;
1178 crc_err = 1;
1179 }
1180 }
1181 if (likely(!crc_err)) {
1182 if (unlikely((rxstat & RX_STS_FRAME_TYPE_) &&
1183 (rxstat & RX_STS_LENGTH_ERR_)))
1184 dev->stats.rx_length_errors++;
1185 if (rxstat & RX_STS_MCAST_)
1186 dev->stats.multicast++;
1187 }
1188}
1189
1190/* Quickly dumps bad packets */
1191static void
1192smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords)
1193{
1194 if (likely(pktwords >= 4)) {
1195 unsigned int timeout = 500;
1196 unsigned int val;
1197 smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_);
1198 do {
1199 udelay(1);
1200 val = smsc911x_reg_read(pdata, RX_DP_CTRL);
1201 } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout);
1202
1203 if (unlikely(timeout == 0))
1204 SMSC_WARN(pdata, hw, "Timed out waiting for "
1205 "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
1206 } else {
1207 while (pktwords--)
1208 smsc911x_reg_read(pdata, RX_DATA_FIFO);
1209 }
1210}
1211
1212/* NAPI poll function */
1213static int smsc911x_poll(struct napi_struct *napi, int budget)
1214{
1215 struct smsc911x_data *pdata =
1216 container_of(napi, struct smsc911x_data, napi);
1217 struct net_device *dev = pdata->dev;
1218 int npackets = 0;
1219
1220 while (npackets < budget) {
1221 unsigned int pktlength;
1222 unsigned int pktwords;
1223 struct sk_buff *skb;
1224 unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata);
1225
1226 if (!rxstat) {
1227 unsigned int temp;
1228 /* We processed all packets available. Tell NAPI it can
1229 * stop polling then re-enable rx interrupts */
1230 smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_);
1231 napi_complete(napi);
1232 temp = smsc911x_reg_read(pdata, INT_EN);
1233 temp |= INT_EN_RSFL_EN_;
1234 smsc911x_reg_write(pdata, INT_EN, temp);
1235 break;
1236 }
1237
1238 /* Count packet for NAPI scheduling, even if it has an error.
1239 * Error packets still require cycles to discard */
1240 npackets++;
1241
1242 pktlength = ((rxstat & 0x3FFF0000) >> 16);
1243 pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2;
1244 smsc911x_rx_counterrors(dev, rxstat);
1245
1246 if (unlikely(rxstat & RX_STS_ES_)) {
1247 SMSC_WARN(pdata, rx_err,
1248 "Discarding packet with error bit set");
1249 /* Packet has an error, discard it and continue with
1250 * the next */
1251 smsc911x_rx_fastforward(pdata, pktwords);
1252 dev->stats.rx_dropped++;
1253 continue;
1254 }
1255
1256 skb = netdev_alloc_skb(dev, pktwords << 2);
1257 if (unlikely(!skb)) {
1258 SMSC_WARN(pdata, rx_err,
1259 "Unable to allocate skb for rx packet");
1260 /* Drop the packet and stop this polling iteration */
1261 smsc911x_rx_fastforward(pdata, pktwords);
1262 dev->stats.rx_dropped++;
1263 break;
1264 }
1265
1266 pdata->ops->rx_readfifo(pdata,
1267 (unsigned int *)skb->data, pktwords);
1268
1269 /* Align IP on 16B boundary */
1270 skb_reserve(skb, NET_IP_ALIGN);
1271 skb_put(skb, pktlength - 4);
1272 skb->protocol = eth_type_trans(skb, dev);
1273 skb_checksum_none_assert(skb);
1274 netif_receive_skb(skb);
1275
1276 /* Update counters */
1277 dev->stats.rx_packets++;
1278 dev->stats.rx_bytes += (pktlength - 4);
1279 }
1280
1281 /* Return total received packets */
1282 return npackets;
1283}
1284
1285/* Returns hash bit number for given MAC address
1286 * Example:
1287 * 01 00 5E 00 00 01 -> returns bit number 31 */
1288static unsigned int smsc911x_hash(char addr[ETH_ALEN])
1289{
1290 return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
1291}
1292
1293static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata)
1294{
1295 /* Performs the multicast & mac_cr update. This is called when
1296 * safe on the current hardware, and with the mac_lock held */
1297 unsigned int mac_cr;
1298
1299 SMSC_ASSERT_MAC_LOCK(pdata);
1300
1301 mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1302 mac_cr |= pdata->set_bits_mask;
1303 mac_cr &= ~(pdata->clear_bits_mask);
1304 smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1305 smsc911x_mac_write(pdata, HASHH, pdata->hashhi);
1306 smsc911x_mac_write(pdata, HASHL, pdata->hashlo);
1307 SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
1308 mac_cr, pdata->hashhi, pdata->hashlo);
1309}
1310
1311static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata)
1312{
1313 unsigned int mac_cr;
1314
1315 /* This function is only called for older LAN911x devices
1316 * (revA or revB), where MAC_CR, HASHH and HASHL should not
1317 * be modified during Rx - newer devices immediately update the
1318 * registers.
1319 *
1320 * This is called from interrupt context */
1321
1322 spin_lock(&pdata->mac_lock);
1323
1324 /* Check Rx has stopped */
1325 if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_)
1326 SMSC_WARN(pdata, drv, "Rx not stopped");
1327
1328 /* Perform the update - safe to do now Rx has stopped */
1329 smsc911x_rx_multicast_update(pdata);
1330
1331 /* Re-enable Rx */
1332 mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1333 mac_cr |= MAC_CR_RXEN_;
1334 smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1335
1336 pdata->multicast_update_pending = 0;
1337
1338 spin_unlock(&pdata->mac_lock);
1339}
1340
1341static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata)
1342{
1343 struct net_device *ndev = pdata->dev;
1344 struct phy_device *phy_dev = ndev->phydev;
1345 int rc = 0;
1346
1347 if (!phy_dev)
1348 return rc;
1349
1350 /* If the internal PHY is in General Power-Down mode, all, except the
1351 * management interface, is powered-down and stays in that condition as
1352 * long as Phy register bit 0.11 is HIGH.
1353 *
1354 * In that case, clear the bit 0.11, so the PHY powers up and we can
1355 * access to the phy registers.
1356 */
1357 rc = phy_read(phy_dev, MII_BMCR);
1358 if (rc < 0) {
1359 SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1360 return rc;
1361 }
1362
1363 /* If the PHY general power-down bit is not set is not necessary to
1364 * disable the general power down-mode.
1365 */
1366 if (rc & BMCR_PDOWN) {
1367 rc = phy_write(phy_dev, MII_BMCR, rc & ~BMCR_PDOWN);
1368 if (rc < 0) {
1369 SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1370 return rc;
1371 }
1372
1373 usleep_range(1000, 1500);
1374 }
1375
1376 return 0;
1377}
1378
1379static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata)
1380{
1381 struct net_device *ndev = pdata->dev;
1382 struct phy_device *phy_dev = ndev->phydev;
1383 int rc = 0;
1384
1385 if (!phy_dev)
1386 return rc;
1387
1388 rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1389
1390 if (rc < 0) {
1391 SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1392 return rc;
1393 }
1394
1395 /* Only disable if energy detect mode is already enabled */
1396 if (rc & MII_LAN83C185_EDPWRDOWN) {
1397 /* Disable energy detect mode for this SMSC Transceivers */
1398 rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1399 rc & (~MII_LAN83C185_EDPWRDOWN));
1400
1401 if (rc < 0) {
1402 SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1403 return rc;
1404 }
1405 /* Allow PHY to wakeup */
1406 mdelay(2);
1407 }
1408
1409 return 0;
1410}
1411
1412static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata)
1413{
1414 struct net_device *ndev = pdata->dev;
1415 struct phy_device *phy_dev = ndev->phydev;
1416 int rc = 0;
1417
1418 if (!phy_dev)
1419 return rc;
1420
1421 rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1422
1423 if (rc < 0) {
1424 SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1425 return rc;
1426 }
1427
1428 /* Only enable if energy detect mode is already disabled */
1429 if (!(rc & MII_LAN83C185_EDPWRDOWN)) {
1430 /* Enable energy detect mode for this SMSC Transceivers */
1431 rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1432 rc | MII_LAN83C185_EDPWRDOWN);
1433
1434 if (rc < 0) {
1435 SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1436 return rc;
1437 }
1438 }
1439 return 0;
1440}
1441
1442static int smsc911x_soft_reset(struct smsc911x_data *pdata)
1443{
1444 unsigned int timeout;
1445 unsigned int temp;
1446 int ret;
1447 unsigned int reset_offset = HW_CFG;
1448 unsigned int reset_mask = HW_CFG_SRST_;
1449
1450 /*
1451 * Make sure to power-up the PHY chip before doing a reset, otherwise
1452 * the reset fails.
1453 */
1454 ret = smsc911x_phy_general_power_up(pdata);
1455 if (ret) {
1456 SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip");
1457 return ret;
1458 }
1459
1460 /*
1461 * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that
1462 * are initialized in a Energy Detect Power-Down mode that prevents
1463 * the MAC chip to be software reseted. So we have to wakeup the PHY
1464 * before.
1465 */
1466 if (pdata->generation == 4) {
1467 ret = smsc911x_phy_disable_energy_detect(pdata);
1468
1469 if (ret) {
1470 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1471 return ret;
1472 }
1473 }
1474
1475 if ((pdata->idrev & 0xFFFF0000) == LAN9250) {
1476 /* special reset for LAN9250 */
1477 reset_offset = RESET_CTL;
1478 reset_mask = RESET_CTL_DIGITAL_RST_;
1479 }
1480
1481 /* Reset the LAN911x */
1482 smsc911x_reg_write(pdata, reset_offset, reset_mask);
1483
1484 /* verify reset bit is cleared */
1485 timeout = 10;
1486 do {
1487 udelay(10);
1488 temp = smsc911x_reg_read(pdata, reset_offset);
1489 } while ((--timeout) && (temp & reset_mask));
1490
1491 if (unlikely(temp & reset_mask)) {
1492 SMSC_WARN(pdata, drv, "Failed to complete reset");
1493 return -EIO;
1494 }
1495
1496 if (pdata->generation == 4) {
1497 ret = smsc911x_phy_enable_energy_detect(pdata);
1498
1499 if (ret) {
1500 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1501 return ret;
1502 }
1503 }
1504
1505 return 0;
1506}
1507
1508/* Sets the device MAC address to dev_addr, called with mac_lock held */
1509static void
1510smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, const u8 dev_addr[6])
1511{
1512 u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4];
1513 u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) |
1514 (dev_addr[1] << 8) | dev_addr[0];
1515
1516 SMSC_ASSERT_MAC_LOCK(pdata);
1517
1518 smsc911x_mac_write(pdata, ADDRH, mac_high16);
1519 smsc911x_mac_write(pdata, ADDRL, mac_low32);
1520}
1521
1522static void smsc911x_disable_irq_chip(struct net_device *dev)
1523{
1524 struct smsc911x_data *pdata = netdev_priv(dev);
1525
1526 smsc911x_reg_write(pdata, INT_EN, 0);
1527 smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
1528}
1529
1530static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
1531{
1532 struct net_device *dev = dev_id;
1533 struct smsc911x_data *pdata = netdev_priv(dev);
1534 u32 intsts = smsc911x_reg_read(pdata, INT_STS);
1535 u32 inten = smsc911x_reg_read(pdata, INT_EN);
1536 int serviced = IRQ_NONE;
1537 u32 temp;
1538
1539 if (unlikely(intsts & inten & INT_STS_SW_INT_)) {
1540 temp = smsc911x_reg_read(pdata, INT_EN);
1541 temp &= (~INT_EN_SW_INT_EN_);
1542 smsc911x_reg_write(pdata, INT_EN, temp);
1543 smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_);
1544 pdata->software_irq_signal = 1;
1545 smp_wmb();
1546 serviced = IRQ_HANDLED;
1547 }
1548
1549 if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) {
1550 /* Called when there is a multicast update scheduled and
1551 * it is now safe to complete the update */
1552 SMSC_TRACE(pdata, intr, "RX Stop interrupt");
1553 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
1554 if (pdata->multicast_update_pending)
1555 smsc911x_rx_multicast_update_workaround(pdata);
1556 serviced = IRQ_HANDLED;
1557 }
1558
1559 if (intsts & inten & INT_STS_TDFA_) {
1560 temp = smsc911x_reg_read(pdata, FIFO_INT);
1561 temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1562 smsc911x_reg_write(pdata, FIFO_INT, temp);
1563 smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_);
1564 netif_wake_queue(dev);
1565 serviced = IRQ_HANDLED;
1566 }
1567
1568 if (unlikely(intsts & inten & INT_STS_RXE_)) {
1569 SMSC_TRACE(pdata, intr, "RX Error interrupt");
1570 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_);
1571 serviced = IRQ_HANDLED;
1572 }
1573
1574 if (likely(intsts & inten & INT_STS_RSFL_)) {
1575 if (likely(napi_schedule_prep(&pdata->napi))) {
1576 /* Disable Rx interrupts */
1577 temp = smsc911x_reg_read(pdata, INT_EN);
1578 temp &= (~INT_EN_RSFL_EN_);
1579 smsc911x_reg_write(pdata, INT_EN, temp);
1580 /* Schedule a NAPI poll */
1581 __napi_schedule(&pdata->napi);
1582 } else {
1583 SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed");
1584 }
1585 serviced = IRQ_HANDLED;
1586 }
1587
1588 return serviced;
1589}
1590
1591static int smsc911x_open(struct net_device *dev)
1592{
1593 struct smsc911x_data *pdata = netdev_priv(dev);
1594 unsigned int timeout;
1595 unsigned int temp;
1596 unsigned int intcfg;
1597 int retval;
1598 int irq_flags;
1599
1600 pm_runtime_get_sync(dev->dev.parent);
1601
1602 /* find and start the given phy */
1603 if (!dev->phydev) {
1604 retval = smsc911x_mii_probe(dev);
1605 if (retval < 0) {
1606 SMSC_WARN(pdata, probe, "Error starting phy");
1607 goto out;
1608 }
1609 }
1610
1611 /* Reset the LAN911x */
1612 retval = smsc911x_soft_reset(pdata);
1613 if (retval) {
1614 SMSC_WARN(pdata, hw, "soft reset failed");
1615 goto mii_free_out;
1616 }
1617
1618 smsc911x_reg_write(pdata, HW_CFG, 0x00050000);
1619 smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740);
1620
1621 /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */
1622 spin_lock_irq(&pdata->mac_lock);
1623 smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q);
1624 spin_unlock_irq(&pdata->mac_lock);
1625
1626 /* Make sure EEPROM has finished loading before setting GPIO_CFG */
1627 timeout = 50;
1628 while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) &&
1629 --timeout) {
1630 udelay(10);
1631 }
1632
1633 if (unlikely(timeout == 0))
1634 SMSC_WARN(pdata, ifup,
1635 "Timed out waiting for EEPROM busy bit to clear");
1636
1637 smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
1638
1639 /* The soft reset above cleared the device's MAC address,
1640 * restore it from local copy (set in probe) */
1641 spin_lock_irq(&pdata->mac_lock);
1642 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1643 spin_unlock_irq(&pdata->mac_lock);
1644
1645 /* Initialise irqs, but leave all sources disabled */
1646 smsc911x_disable_irq_chip(dev);
1647
1648 /* Set interrupt deassertion to 100uS */
1649 intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
1650
1651 if (pdata->config.irq_polarity) {
1652 SMSC_TRACE(pdata, ifup, "irq polarity: active high");
1653 intcfg |= INT_CFG_IRQ_POL_;
1654 } else {
1655 SMSC_TRACE(pdata, ifup, "irq polarity: active low");
1656 }
1657
1658 if (pdata->config.irq_type) {
1659 SMSC_TRACE(pdata, ifup, "irq type: push-pull");
1660 intcfg |= INT_CFG_IRQ_TYPE_;
1661 } else {
1662 SMSC_TRACE(pdata, ifup, "irq type: open drain");
1663 }
1664
1665 smsc911x_reg_write(pdata, INT_CFG, intcfg);
1666
1667 SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq);
1668 pdata->software_irq_signal = 0;
1669 smp_wmb();
1670
1671 irq_flags = irq_get_trigger_type(dev->irq);
1672 retval = request_irq(dev->irq, smsc911x_irqhandler,
1673 irq_flags | IRQF_SHARED, dev->name, dev);
1674 if (retval) {
1675 SMSC_WARN(pdata, probe,
1676 "Unable to claim requested irq: %d", dev->irq);
1677 goto mii_free_out;
1678 }
1679
1680 temp = smsc911x_reg_read(pdata, INT_EN);
1681 temp |= INT_EN_SW_INT_EN_;
1682 smsc911x_reg_write(pdata, INT_EN, temp);
1683
1684 timeout = 1000;
1685 while (timeout--) {
1686 if (pdata->software_irq_signal)
1687 break;
1688 msleep(1);
1689 }
1690
1691 if (!pdata->software_irq_signal) {
1692 netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n",
1693 dev->irq);
1694 retval = -ENODEV;
1695 goto irq_stop_out;
1696 }
1697 SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",
1698 dev->irq);
1699
1700 netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
1701 (unsigned long)pdata->ioaddr, dev->irq);
1702
1703 /* Reset the last known duplex and carrier */
1704 pdata->last_duplex = -1;
1705 pdata->last_carrier = -1;
1706
1707 /* Bring the PHY up */
1708 phy_start(dev->phydev);
1709
1710 temp = smsc911x_reg_read(pdata, HW_CFG);
1711 /* Preserve TX FIFO size and external PHY configuration */
1712 temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF);
1713 temp |= HW_CFG_SF_;
1714 smsc911x_reg_write(pdata, HW_CFG, temp);
1715
1716 temp = smsc911x_reg_read(pdata, FIFO_INT);
1717 temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1718 temp &= ~(FIFO_INT_RX_STS_LEVEL_);
1719 smsc911x_reg_write(pdata, FIFO_INT, temp);
1720
1721 /* set RX Data offset to 2 bytes for alignment */
1722 smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8));
1723
1724 /* enable NAPI polling before enabling RX interrupts */
1725 napi_enable(&pdata->napi);
1726
1727 temp = smsc911x_reg_read(pdata, INT_EN);
1728 temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_);
1729 smsc911x_reg_write(pdata, INT_EN, temp);
1730
1731 spin_lock_irq(&pdata->mac_lock);
1732 temp = smsc911x_mac_read(pdata, MAC_CR);
1733 temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
1734 smsc911x_mac_write(pdata, MAC_CR, temp);
1735 spin_unlock_irq(&pdata->mac_lock);
1736
1737 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
1738
1739 netif_start_queue(dev);
1740 return 0;
1741
1742irq_stop_out:
1743 free_irq(dev->irq, dev);
1744mii_free_out:
1745 phy_disconnect(dev->phydev);
1746out:
1747 pm_runtime_put(dev->dev.parent);
1748 return retval;
1749}
1750
1751/* Entry point for stopping the interface */
1752static int smsc911x_stop(struct net_device *dev)
1753{
1754 struct smsc911x_data *pdata = netdev_priv(dev);
1755 unsigned int temp;
1756
1757 /* Disable all device interrupts */
1758 temp = smsc911x_reg_read(pdata, INT_CFG);
1759 temp &= ~INT_CFG_IRQ_EN_;
1760 smsc911x_reg_write(pdata, INT_CFG, temp);
1761
1762 /* Stop Tx and Rx polling */
1763 netif_stop_queue(dev);
1764 napi_disable(&pdata->napi);
1765
1766 /* At this point all Rx and Tx activity is stopped */
1767 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1768 smsc911x_tx_update_txcounters(dev);
1769
1770 free_irq(dev->irq, dev);
1771
1772 /* Bring the PHY down */
1773 if (dev->phydev) {
1774 phy_stop(dev->phydev);
1775 phy_disconnect(dev->phydev);
1776 }
1777 netif_carrier_off(dev);
1778 pm_runtime_put(dev->dev.parent);
1779
1780 SMSC_TRACE(pdata, ifdown, "Interface stopped");
1781 return 0;
1782}
1783
1784/* Entry point for transmitting a packet */
1785static netdev_tx_t
1786smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
1787{
1788 struct smsc911x_data *pdata = netdev_priv(dev);
1789 unsigned int freespace;
1790 unsigned int tx_cmd_a;
1791 unsigned int tx_cmd_b;
1792 unsigned int temp;
1793 u32 wrsz;
1794 ulong bufp;
1795
1796 freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_;
1797
1798 if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD))
1799 SMSC_WARN(pdata, tx_err,
1800 "Tx data fifo low, space available: %d", freespace);
1801
1802 /* Word alignment adjustment */
1803 tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16;
1804 tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
1805 tx_cmd_a |= (unsigned int)skb->len;
1806
1807 tx_cmd_b = ((unsigned int)skb->len) << 16;
1808 tx_cmd_b |= (unsigned int)skb->len;
1809
1810 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a);
1811 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b);
1812
1813 bufp = (ulong)skb->data & (~0x3);
1814 wrsz = (u32)skb->len + 3;
1815 wrsz += (u32)((ulong)skb->data & 0x3);
1816 wrsz >>= 2;
1817
1818 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
1819 freespace -= (skb->len + 32);
1820 skb_tx_timestamp(skb);
1821 dev_consume_skb_any(skb);
1822
1823 if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30))
1824 smsc911x_tx_update_txcounters(dev);
1825
1826 if (freespace < TX_FIFO_LOW_THRESHOLD) {
1827 netif_stop_queue(dev);
1828 temp = smsc911x_reg_read(pdata, FIFO_INT);
1829 temp &= 0x00FFFFFF;
1830 temp |= 0x32000000;
1831 smsc911x_reg_write(pdata, FIFO_INT, temp);
1832 }
1833
1834 return NETDEV_TX_OK;
1835}
1836
1837/* Entry point for getting status counters */
1838static struct net_device_stats *smsc911x_get_stats(struct net_device *dev)
1839{
1840 struct smsc911x_data *pdata = netdev_priv(dev);
1841 smsc911x_tx_update_txcounters(dev);
1842 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1843 return &dev->stats;
1844}
1845
1846/* Entry point for setting addressing modes */
1847static void smsc911x_set_multicast_list(struct net_device *dev)
1848{
1849 struct smsc911x_data *pdata = netdev_priv(dev);
1850 unsigned long flags;
1851
1852 if (dev->flags & IFF_PROMISC) {
1853 /* Enabling promiscuous mode */
1854 pdata->set_bits_mask = MAC_CR_PRMS_;
1855 pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1856 pdata->hashhi = 0;
1857 pdata->hashlo = 0;
1858 } else if (dev->flags & IFF_ALLMULTI) {
1859 /* Enabling all multicast mode */
1860 pdata->set_bits_mask = MAC_CR_MCPAS_;
1861 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_);
1862 pdata->hashhi = 0;
1863 pdata->hashlo = 0;
1864 } else if (!netdev_mc_empty(dev)) {
1865 /* Enabling specific multicast addresses */
1866 unsigned int hash_high = 0;
1867 unsigned int hash_low = 0;
1868 struct netdev_hw_addr *ha;
1869
1870 pdata->set_bits_mask = MAC_CR_HPFILT_;
1871 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1872
1873 netdev_for_each_mc_addr(ha, dev) {
1874 unsigned int bitnum = smsc911x_hash(ha->addr);
1875 unsigned int mask = 0x01 << (bitnum & 0x1F);
1876
1877 if (bitnum & 0x20)
1878 hash_high |= mask;
1879 else
1880 hash_low |= mask;
1881 }
1882
1883 pdata->hashhi = hash_high;
1884 pdata->hashlo = hash_low;
1885 } else {
1886 /* Enabling local MAC address only */
1887 pdata->set_bits_mask = 0;
1888 pdata->clear_bits_mask =
1889 (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1890 pdata->hashhi = 0;
1891 pdata->hashlo = 0;
1892 }
1893
1894 spin_lock_irqsave(&pdata->mac_lock, flags);
1895
1896 if (pdata->generation <= 1) {
1897 /* Older hardware revision - cannot change these flags while
1898 * receiving data */
1899 if (!pdata->multicast_update_pending) {
1900 unsigned int temp;
1901 SMSC_TRACE(pdata, hw, "scheduling mcast update");
1902 pdata->multicast_update_pending = 1;
1903
1904 /* Request the hardware to stop, then perform the
1905 * update when we get an RX_STOP interrupt */
1906 temp = smsc911x_mac_read(pdata, MAC_CR);
1907 temp &= ~(MAC_CR_RXEN_);
1908 smsc911x_mac_write(pdata, MAC_CR, temp);
1909 } else {
1910 /* There is another update pending, this should now
1911 * use the newer values */
1912 }
1913 } else {
1914 /* Newer hardware revision - can write immediately */
1915 smsc911x_rx_multicast_update(pdata);
1916 }
1917
1918 spin_unlock_irqrestore(&pdata->mac_lock, flags);
1919}
1920
1921#ifdef CONFIG_NET_POLL_CONTROLLER
1922static void smsc911x_poll_controller(struct net_device *dev)
1923{
1924 disable_irq(dev->irq);
1925 smsc911x_irqhandler(0, dev);
1926 enable_irq(dev->irq);
1927}
1928#endif /* CONFIG_NET_POLL_CONTROLLER */
1929
1930static int smsc911x_set_mac_address(struct net_device *dev, void *p)
1931{
1932 struct smsc911x_data *pdata = netdev_priv(dev);
1933 struct sockaddr *addr = p;
1934
1935 /* On older hardware revisions we cannot change the mac address
1936 * registers while receiving data. Newer devices can safely change
1937 * this at any time. */
1938 if (pdata->generation <= 1 && netif_running(dev))
1939 return -EBUSY;
1940
1941 if (!is_valid_ether_addr(addr->sa_data))
1942 return -EADDRNOTAVAIL;
1943
1944 eth_hw_addr_set(dev, addr->sa_data);
1945
1946 spin_lock_irq(&pdata->mac_lock);
1947 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1948 spin_unlock_irq(&pdata->mac_lock);
1949
1950 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
1951
1952 return 0;
1953}
1954
1955static void smsc911x_ethtool_getdrvinfo(struct net_device *dev,
1956 struct ethtool_drvinfo *info)
1957{
1958 strscpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver));
1959 strscpy(info->version, SMSC_DRV_VERSION, sizeof(info->version));
1960 strscpy(info->bus_info, dev_name(dev->dev.parent),
1961 sizeof(info->bus_info));
1962}
1963
1964static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev)
1965{
1966 struct smsc911x_data *pdata = netdev_priv(dev);
1967 return pdata->msg_enable;
1968}
1969
1970static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
1971{
1972 struct smsc911x_data *pdata = netdev_priv(dev);
1973 pdata->msg_enable = level;
1974}
1975
1976static int smsc911x_ethtool_getregslen(struct net_device *dev)
1977{
1978 return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) *
1979 sizeof(u32);
1980}
1981
1982static void
1983smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs,
1984 void *buf)
1985{
1986 struct smsc911x_data *pdata = netdev_priv(dev);
1987 struct phy_device *phy_dev = dev->phydev;
1988 unsigned long flags;
1989 unsigned int i;
1990 unsigned int j = 0;
1991 u32 *data = buf;
1992
1993 regs->version = pdata->idrev;
1994 for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32)))
1995 data[j++] = smsc911x_reg_read(pdata, i);
1996
1997 for (i = MAC_CR; i <= WUCSR; i++) {
1998 spin_lock_irqsave(&pdata->mac_lock, flags);
1999 data[j++] = smsc911x_mac_read(pdata, i);
2000 spin_unlock_irqrestore(&pdata->mac_lock, flags);
2001 }
2002
2003 for (i = 0; i <= 31; i++)
2004 data[j++] = smsc911x_mii_read(phy_dev->mdio.bus,
2005 phy_dev->mdio.addr, i);
2006}
2007
2008static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata)
2009{
2010 unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG);
2011 temp &= ~GPIO_CFG_EEPR_EN_;
2012 smsc911x_reg_write(pdata, GPIO_CFG, temp);
2013 msleep(1);
2014}
2015
2016static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
2017{
2018 int timeout = 100;
2019 u32 e2cmd;
2020
2021 SMSC_TRACE(pdata, drv, "op 0x%08x", op);
2022 if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
2023 SMSC_WARN(pdata, drv, "Busy at start");
2024 return -EBUSY;
2025 }
2026
2027 e2cmd = op | E2P_CMD_EPC_BUSY_;
2028 smsc911x_reg_write(pdata, E2P_CMD, e2cmd);
2029
2030 do {
2031 msleep(1);
2032 e2cmd = smsc911x_reg_read(pdata, E2P_CMD);
2033 } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
2034
2035 if (!timeout) {
2036 SMSC_TRACE(pdata, drv, "TIMED OUT");
2037 return -EAGAIN;
2038 }
2039
2040 if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
2041 SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation");
2042 return -EINVAL;
2043 }
2044
2045 return 0;
2046}
2047
2048static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata,
2049 u8 address, u8 *data)
2050{
2051 u32 op = E2P_CMD_EPC_CMD_READ_ | address;
2052 int ret;
2053
2054 SMSC_TRACE(pdata, drv, "address 0x%x", address);
2055 ret = smsc911x_eeprom_send_cmd(pdata, op);
2056
2057 if (!ret)
2058 data[address] = smsc911x_reg_read(pdata, E2P_DATA);
2059
2060 return ret;
2061}
2062
2063static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata,
2064 u8 address, u8 data)
2065{
2066 u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
2067 int ret;
2068
2069 SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data);
2070 ret = smsc911x_eeprom_send_cmd(pdata, op);
2071
2072 if (!ret) {
2073 op = E2P_CMD_EPC_CMD_WRITE_ | address;
2074 smsc911x_reg_write(pdata, E2P_DATA, (u32)data);
2075
2076 /* Workaround for hardware read-after-write restriction */
2077 smsc911x_reg_read(pdata, BYTE_TEST);
2078
2079 ret = smsc911x_eeprom_send_cmd(pdata, op);
2080 }
2081
2082 return ret;
2083}
2084
2085static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev)
2086{
2087 return SMSC911X_EEPROM_SIZE;
2088}
2089
2090static int smsc911x_ethtool_get_eeprom(struct net_device *dev,
2091 struct ethtool_eeprom *eeprom, u8 *data)
2092{
2093 struct smsc911x_data *pdata = netdev_priv(dev);
2094 u8 eeprom_data[SMSC911X_EEPROM_SIZE];
2095 int len;
2096 int i;
2097
2098 smsc911x_eeprom_enable_access(pdata);
2099
2100 len = min(eeprom->len, SMSC911X_EEPROM_SIZE);
2101 for (i = 0; i < len; i++) {
2102 int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data);
2103 if (ret < 0) {
2104 eeprom->len = 0;
2105 return ret;
2106 }
2107 }
2108
2109 memcpy(data, &eeprom_data[eeprom->offset], len);
2110 eeprom->len = len;
2111 return 0;
2112}
2113
2114static int smsc911x_ethtool_set_eeprom(struct net_device *dev,
2115 struct ethtool_eeprom *eeprom, u8 *data)
2116{
2117 int ret;
2118 struct smsc911x_data *pdata = netdev_priv(dev);
2119
2120 smsc911x_eeprom_enable_access(pdata);
2121 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_);
2122 ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data);
2123 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_);
2124
2125 /* Single byte write, according to man page */
2126 eeprom->len = 1;
2127
2128 return ret;
2129}
2130
2131static const struct ethtool_ops smsc911x_ethtool_ops = {
2132 .get_link = ethtool_op_get_link,
2133 .get_drvinfo = smsc911x_ethtool_getdrvinfo,
2134 .nway_reset = phy_ethtool_nway_reset,
2135 .get_msglevel = smsc911x_ethtool_getmsglevel,
2136 .set_msglevel = smsc911x_ethtool_setmsglevel,
2137 .get_regs_len = smsc911x_ethtool_getregslen,
2138 .get_regs = smsc911x_ethtool_getregs,
2139 .get_eeprom_len = smsc911x_ethtool_get_eeprom_len,
2140 .get_eeprom = smsc911x_ethtool_get_eeprom,
2141 .set_eeprom = smsc911x_ethtool_set_eeprom,
2142 .get_ts_info = ethtool_op_get_ts_info,
2143 .get_link_ksettings = phy_ethtool_get_link_ksettings,
2144 .set_link_ksettings = phy_ethtool_set_link_ksettings,
2145};
2146
2147static const struct net_device_ops smsc911x_netdev_ops = {
2148 .ndo_open = smsc911x_open,
2149 .ndo_stop = smsc911x_stop,
2150 .ndo_start_xmit = smsc911x_hard_start_xmit,
2151 .ndo_get_stats = smsc911x_get_stats,
2152 .ndo_set_rx_mode = smsc911x_set_multicast_list,
2153 .ndo_eth_ioctl = phy_do_ioctl_running,
2154 .ndo_validate_addr = eth_validate_addr,
2155 .ndo_set_mac_address = smsc911x_set_mac_address,
2156#ifdef CONFIG_NET_POLL_CONTROLLER
2157 .ndo_poll_controller = smsc911x_poll_controller,
2158#endif
2159};
2160
2161/* copies the current mac address from hardware to dev->dev_addr */
2162static void smsc911x_read_mac_address(struct net_device *dev)
2163{
2164 struct smsc911x_data *pdata = netdev_priv(dev);
2165 u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH);
2166 u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL);
2167 u8 addr[ETH_ALEN];
2168
2169 addr[0] = (u8)(mac_low32);
2170 addr[1] = (u8)(mac_low32 >> 8);
2171 addr[2] = (u8)(mac_low32 >> 16);
2172 addr[3] = (u8)(mac_low32 >> 24);
2173 addr[4] = (u8)(mac_high16);
2174 addr[5] = (u8)(mac_high16 >> 8);
2175 eth_hw_addr_set(dev, addr);
2176}
2177
2178/* Initializing private device structures, only called from probe */
2179static int smsc911x_init(struct net_device *dev)
2180{
2181 struct smsc911x_data *pdata = netdev_priv(dev);
2182 unsigned int byte_test, mask;
2183 unsigned int to = 100;
2184
2185 SMSC_TRACE(pdata, probe, "Driver Parameters:");
2186 SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
2187 (unsigned long)pdata->ioaddr);
2188 SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq);
2189 SMSC_TRACE(pdata, probe, "PHY will be autodetected.");
2190
2191 spin_lock_init(&pdata->dev_lock);
2192 spin_lock_init(&pdata->mac_lock);
2193
2194 if (pdata->ioaddr == NULL) {
2195 SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000");
2196 return -ENODEV;
2197 }
2198
2199 /*
2200 * poll the READY bit in PMT_CTRL. Any other access to the device is
2201 * forbidden while this bit isn't set. Try for 100ms
2202 *
2203 * Note that this test is done before the WORD_SWAP register is
2204 * programmed. So in some configurations the READY bit is at 16 before
2205 * WORD_SWAP is written to. This issue is worked around by waiting
2206 * until either bit 0 or bit 16 gets set in PMT_CTRL.
2207 *
2208 * SMSC has confirmed that checking bit 16 (marked as reserved in
2209 * the datasheet) is fine since these bits "will either never be set
2210 * or can only go high after READY does (so also indicate the device
2211 * is ready)".
2212 */
2213
2214 mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
2215 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
2216 udelay(1000);
2217
2218 if (to == 0) {
2219 netdev_err(dev, "Device not READY in 100ms aborting\n");
2220 return -ENODEV;
2221 }
2222
2223 /* Check byte ordering */
2224 byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2225 SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
2226 if (byte_test == 0x43218765) {
2227 SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, "
2228 "applying WORD_SWAP");
2229 smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff);
2230
2231 /* 1 dummy read of BYTE_TEST is needed after a write to
2232 * WORD_SWAP before its contents are valid */
2233 byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2234
2235 byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2236 }
2237
2238 if (byte_test != 0x87654321) {
2239 SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test);
2240 if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) {
2241 SMSC_WARN(pdata, probe,
2242 "top 16 bits equal to bottom 16 bits");
2243 SMSC_TRACE(pdata, probe,
2244 "This may mean the chip is set "
2245 "for 32 bit while the bus is reading 16 bit");
2246 }
2247 return -ENODEV;
2248 }
2249
2250 /* Default generation to zero (all workarounds apply) */
2251 pdata->generation = 0;
2252
2253 pdata->idrev = smsc911x_reg_read(pdata, ID_REV);
2254 switch (pdata->idrev & 0xFFFF0000) {
2255 case LAN9118:
2256 case LAN9117:
2257 case LAN9116:
2258 case LAN9115:
2259 case LAN89218:
2260 /* LAN911[5678] family */
2261 pdata->generation = pdata->idrev & 0x0000FFFF;
2262 break;
2263
2264 case LAN9218:
2265 case LAN9217:
2266 case LAN9216:
2267 case LAN9215:
2268 /* LAN921[5678] family */
2269 pdata->generation = 3;
2270 break;
2271
2272 case LAN9210:
2273 case LAN9211:
2274 case LAN9220:
2275 case LAN9221:
2276 case LAN9250:
2277 /* LAN9210/LAN9211/LAN9220/LAN9221/LAN9250 */
2278 pdata->generation = 4;
2279 break;
2280
2281 default:
2282 SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X",
2283 pdata->idrev);
2284 return -ENODEV;
2285 }
2286
2287 SMSC_TRACE(pdata, probe,
2288 "LAN911x identified, idrev: 0x%08X, generation: %d",
2289 pdata->idrev, pdata->generation);
2290
2291 if (pdata->generation == 0)
2292 SMSC_WARN(pdata, probe,
2293 "This driver is not intended for this chip revision");
2294
2295 /* workaround for platforms without an eeprom, where the mac address
2296 * is stored elsewhere and set by the bootloader. This saves the
2297 * mac address before resetting the device */
2298 if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) {
2299 spin_lock_irq(&pdata->mac_lock);
2300 smsc911x_read_mac_address(dev);
2301 spin_unlock_irq(&pdata->mac_lock);
2302 }
2303
2304 /* Reset the LAN911x */
2305 if (smsc911x_phy_reset(pdata) || smsc911x_soft_reset(pdata))
2306 return -ENODEV;
2307
2308 dev->flags |= IFF_MULTICAST;
2309 netif_napi_add_weight(dev, &pdata->napi, smsc911x_poll,
2310 SMSC_NAPI_WEIGHT);
2311 dev->netdev_ops = &smsc911x_netdev_ops;
2312 dev->ethtool_ops = &smsc911x_ethtool_ops;
2313
2314 return 0;
2315}
2316
2317static void smsc911x_drv_remove(struct platform_device *pdev)
2318{
2319 struct net_device *dev;
2320 struct smsc911x_data *pdata;
2321 struct resource *res;
2322
2323 dev = platform_get_drvdata(pdev);
2324 BUG_ON(!dev);
2325 pdata = netdev_priv(dev);
2326 BUG_ON(!pdata);
2327 BUG_ON(!pdata->ioaddr);
2328
2329 SMSC_TRACE(pdata, ifdown, "Stopping driver");
2330
2331 unregister_netdev(dev);
2332
2333 mdiobus_unregister(pdata->mii_bus);
2334 mdiobus_free(pdata->mii_bus);
2335
2336 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2337 "smsc911x-memory");
2338 if (!res)
2339 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2340
2341 release_mem_region(res->start, resource_size(res));
2342
2343 iounmap(pdata->ioaddr);
2344
2345 (void)smsc911x_disable_resources(pdev);
2346 smsc911x_free_resources(pdev);
2347
2348 free_netdev(dev);
2349
2350 pm_runtime_disable(&pdev->dev);
2351}
2352
2353/* standard register acces */
2354static const struct smsc911x_ops standard_smsc911x_ops = {
2355 .reg_read = __smsc911x_reg_read,
2356 .reg_write = __smsc911x_reg_write,
2357 .rx_readfifo = smsc911x_rx_readfifo,
2358 .tx_writefifo = smsc911x_tx_writefifo,
2359};
2360
2361/* shifted register access */
2362static const struct smsc911x_ops shifted_smsc911x_ops = {
2363 .reg_read = __smsc911x_reg_read_shift,
2364 .reg_write = __smsc911x_reg_write_shift,
2365 .rx_readfifo = smsc911x_rx_readfifo_shift,
2366 .tx_writefifo = smsc911x_tx_writefifo_shift,
2367};
2368
2369static int smsc911x_probe_config(struct smsc911x_platform_config *config,
2370 struct device *dev)
2371{
2372 int phy_interface;
2373 u32 width = 0;
2374 int err;
2375
2376 phy_interface = device_get_phy_mode(dev);
2377 if (phy_interface < 0)
2378 phy_interface = PHY_INTERFACE_MODE_NA;
2379 config->phy_interface = phy_interface;
2380
2381 device_get_mac_address(dev, config->mac);
2382
2383 err = device_property_read_u32(dev, "reg-io-width", &width);
2384 if (err == -ENXIO)
2385 return err;
2386 if (!err && width == 4)
2387 config->flags |= SMSC911X_USE_32BIT;
2388 else
2389 config->flags |= SMSC911X_USE_16BIT;
2390
2391 device_property_read_u32(dev, "reg-shift", &config->shift);
2392
2393 if (device_property_present(dev, "smsc,irq-active-high"))
2394 config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
2395
2396 if (device_property_present(dev, "smsc,irq-push-pull"))
2397 config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
2398
2399 if (device_property_present(dev, "smsc,force-internal-phy"))
2400 config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
2401
2402 if (device_property_present(dev, "smsc,force-external-phy"))
2403 config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
2404
2405 if (device_property_present(dev, "smsc,save-mac-address"))
2406 config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
2407
2408 return 0;
2409}
2410
2411static int smsc911x_drv_probe(struct platform_device *pdev)
2412{
2413 struct net_device *dev;
2414 struct smsc911x_data *pdata;
2415 struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev);
2416 struct resource *res;
2417 int res_size, irq;
2418 int retval;
2419
2420 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2421 "smsc911x-memory");
2422 if (!res)
2423 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2424 if (!res) {
2425 pr_warn("Could not allocate resource\n");
2426 retval = -ENODEV;
2427 goto out_0;
2428 }
2429 res_size = resource_size(res);
2430
2431 irq = platform_get_irq(pdev, 0);
2432 if (irq == -EPROBE_DEFER) {
2433 retval = -EPROBE_DEFER;
2434 goto out_0;
2435 } else if (irq < 0) {
2436 pr_warn("Could not allocate irq resource\n");
2437 retval = -ENODEV;
2438 goto out_0;
2439 }
2440
2441 if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) {
2442 retval = -EBUSY;
2443 goto out_0;
2444 }
2445
2446 dev = alloc_etherdev(sizeof(struct smsc911x_data));
2447 if (!dev) {
2448 retval = -ENOMEM;
2449 goto out_release_io_1;
2450 }
2451
2452 SET_NETDEV_DEV(dev, &pdev->dev);
2453
2454 pdata = netdev_priv(dev);
2455 dev->irq = irq;
2456 pdata->ioaddr = ioremap(res->start, res_size);
2457 if (!pdata->ioaddr) {
2458 retval = -ENOMEM;
2459 goto out_ioremap_fail;
2460 }
2461
2462 pdata->dev = dev;
2463 pdata->msg_enable = ((1 << debug) - 1);
2464
2465 platform_set_drvdata(pdev, dev);
2466
2467 retval = smsc911x_request_resources(pdev);
2468 if (retval)
2469 goto out_request_resources_fail;
2470
2471 retval = smsc911x_enable_resources(pdev);
2472 if (retval)
2473 goto out_enable_resources_fail;
2474
2475 if (pdata->ioaddr == NULL) {
2476 SMSC_WARN(pdata, probe, "Error smsc911x base address invalid");
2477 retval = -ENOMEM;
2478 goto out_disable_resources;
2479 }
2480
2481 retval = smsc911x_probe_config(&pdata->config, &pdev->dev);
2482 if (retval && config) {
2483 /* copy config parameters across to pdata */
2484 memcpy(&pdata->config, config, sizeof(pdata->config));
2485 retval = 0;
2486 }
2487
2488 if (retval) {
2489 SMSC_WARN(pdata, probe, "Error smsc911x config not found");
2490 goto out_disable_resources;
2491 }
2492
2493 /* assume standard, non-shifted, access to HW registers */
2494 pdata->ops = &standard_smsc911x_ops;
2495 /* apply the right access if shifting is needed */
2496 if (pdata->config.shift)
2497 pdata->ops = &shifted_smsc911x_ops;
2498
2499 pm_runtime_enable(&pdev->dev);
2500 pm_runtime_get_sync(&pdev->dev);
2501
2502 retval = smsc911x_init(dev);
2503 if (retval < 0)
2504 goto out_init_fail;
2505
2506 netif_carrier_off(dev);
2507
2508 retval = smsc911x_mii_init(pdev, dev);
2509 if (retval) {
2510 SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
2511 goto out_init_fail;
2512 }
2513
2514 retval = register_netdev(dev);
2515 if (retval) {
2516 SMSC_WARN(pdata, probe, "Error %i registering device", retval);
2517 goto out_init_fail;
2518 } else {
2519 SMSC_TRACE(pdata, probe,
2520 "Network interface: \"%s\"", dev->name);
2521 }
2522
2523 spin_lock_irq(&pdata->mac_lock);
2524
2525 /* Check if mac address has been specified when bringing interface up */
2526 if (is_valid_ether_addr(dev->dev_addr)) {
2527 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2528 SMSC_TRACE(pdata, probe,
2529 "MAC Address is specified by configuration");
2530 } else if (is_valid_ether_addr(pdata->config.mac)) {
2531 eth_hw_addr_set(dev, pdata->config.mac);
2532 SMSC_TRACE(pdata, probe,
2533 "MAC Address specified by platform data");
2534 } else {
2535 /* Try reading mac address from device. if EEPROM is present
2536 * it will already have been set */
2537 smsc_get_mac(dev);
2538
2539 if (is_valid_ether_addr(dev->dev_addr)) {
2540 /* eeprom values are valid so use them */
2541 SMSC_TRACE(pdata, probe,
2542 "Mac Address is read from LAN911x EEPROM");
2543 } else {
2544 /* eeprom values are invalid, generate random MAC */
2545 eth_hw_addr_random(dev);
2546 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2547 SMSC_TRACE(pdata, probe,
2548 "MAC Address is set to eth_random_addr");
2549 }
2550 }
2551
2552 spin_unlock_irq(&pdata->mac_lock);
2553 pm_runtime_put(&pdev->dev);
2554
2555 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
2556
2557 return 0;
2558
2559out_init_fail:
2560 pm_runtime_put(&pdev->dev);
2561 pm_runtime_disable(&pdev->dev);
2562out_disable_resources:
2563 (void)smsc911x_disable_resources(pdev);
2564out_enable_resources_fail:
2565 smsc911x_free_resources(pdev);
2566out_request_resources_fail:
2567 iounmap(pdata->ioaddr);
2568out_ioremap_fail:
2569 free_netdev(dev);
2570out_release_io_1:
2571 release_mem_region(res->start, resource_size(res));
2572out_0:
2573 return retval;
2574}
2575
2576#ifdef CONFIG_PM
2577/* This implementation assumes the devices remains powered on its VDDVARIO
2578 * pins during suspend. */
2579
2580/* TODO: implement freeze/thaw callbacks for hibernation.*/
2581
2582static int smsc911x_suspend(struct device *dev)
2583{
2584 struct net_device *ndev = dev_get_drvdata(dev);
2585 struct smsc911x_data *pdata = netdev_priv(ndev);
2586
2587 if (netif_running(ndev)) {
2588 netif_stop_queue(ndev);
2589 netif_device_detach(ndev);
2590 if (!device_may_wakeup(dev))
2591 phy_stop(ndev->phydev);
2592 }
2593
2594 /* enable wake on LAN, energy detection and the external PME
2595 * signal. */
2596 smsc911x_reg_write(pdata, PMT_CTRL,
2597 PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ |
2598 PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_);
2599
2600 pm_runtime_disable(dev);
2601 pm_runtime_set_suspended(dev);
2602
2603 return 0;
2604}
2605
2606static int smsc911x_resume(struct device *dev)
2607{
2608 struct net_device *ndev = dev_get_drvdata(dev);
2609 struct smsc911x_data *pdata = netdev_priv(ndev);
2610 unsigned int to = 100;
2611
2612 pm_runtime_enable(dev);
2613 pm_runtime_resume(dev);
2614
2615 /* Note 3.11 from the datasheet:
2616 * "When the LAN9220 is in a power saving state, a write of any
2617 * data to the BYTE_TEST register will wake-up the device."
2618 */
2619 smsc911x_reg_write(pdata, BYTE_TEST, 0);
2620
2621 /* poll the READY bit in PMT_CTRL. Any other access to the device is
2622 * forbidden while this bit isn't set. Try for 100ms and return -EIO
2623 * if it failed. */
2624 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
2625 udelay(1000);
2626
2627 if (to == 0)
2628 return -EIO;
2629
2630 if (netif_running(ndev)) {
2631 netif_device_attach(ndev);
2632 netif_start_queue(ndev);
2633 if (!device_may_wakeup(dev))
2634 phy_start(ndev->phydev);
2635 }
2636
2637 return 0;
2638}
2639
2640static const struct dev_pm_ops smsc911x_pm_ops = {
2641 .suspend = smsc911x_suspend,
2642 .resume = smsc911x_resume,
2643};
2644
2645#define SMSC911X_PM_OPS (&smsc911x_pm_ops)
2646
2647#else
2648#define SMSC911X_PM_OPS NULL
2649#endif
2650
2651#ifdef CONFIG_OF
2652static const struct of_device_id smsc911x_dt_ids[] = {
2653 { .compatible = "smsc,lan9115", },
2654 { /* sentinel */ }
2655};
2656MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
2657#endif
2658
2659#ifdef CONFIG_ACPI
2660static const struct acpi_device_id smsc911x_acpi_match[] = {
2661 { "ARMH9118", 0 },
2662 { }
2663};
2664MODULE_DEVICE_TABLE(acpi, smsc911x_acpi_match);
2665#endif
2666
2667static struct platform_driver smsc911x_driver = {
2668 .probe = smsc911x_drv_probe,
2669 .remove_new = smsc911x_drv_remove,
2670 .driver = {
2671 .name = SMSC_CHIPNAME,
2672 .pm = SMSC911X_PM_OPS,
2673 .of_match_table = of_match_ptr(smsc911x_dt_ids),
2674 .acpi_match_table = ACPI_PTR(smsc911x_acpi_match),
2675 },
2676};
2677
2678/* Entry point for loading the module */
2679static int __init smsc911x_init_module(void)
2680{
2681 SMSC_INITIALIZE();
2682 return platform_driver_register(&smsc911x_driver);
2683}
2684
2685/* entry point for unloading the module */
2686static void __exit smsc911x_cleanup_module(void)
2687{
2688 platform_driver_unregister(&smsc911x_driver);
2689}
2690
2691module_init(smsc911x_init_module);
2692module_exit(smsc911x_cleanup_module);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/***************************************************************************
3 *
4 * Copyright (C) 2004-2008 SMSC
5 * Copyright (C) 2005-2008 ARM
6 *
7 ***************************************************************************
8 * Rewritten, heavily based on smsc911x simple driver by SMSC.
9 * Partly uses io macros from smc91x.c by Nicolas Pitre
10 *
11 * Supported devices:
12 * LAN9115, LAN9116, LAN9117, LAN9118
13 * LAN9215, LAN9216, LAN9217, LAN9218
14 * LAN9210, LAN9211
15 * LAN9220, LAN9221
16 * LAN89218,LAN9250
17 */
18
19#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20
21#include <linux/crc32.h>
22#include <linux/clk.h>
23#include <linux/delay.h>
24#include <linux/errno.h>
25#include <linux/etherdevice.h>
26#include <linux/ethtool.h>
27#include <linux/init.h>
28#include <linux/interrupt.h>
29#include <linux/ioport.h>
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/netdevice.h>
33#include <linux/platform_device.h>
34#include <linux/regulator/consumer.h>
35#include <linux/sched.h>
36#include <linux/timer.h>
37#include <linux/bug.h>
38#include <linux/bitops.h>
39#include <linux/irq.h>
40#include <linux/io.h>
41#include <linux/swab.h>
42#include <linux/phy.h>
43#include <linux/smsc911x.h>
44#include <linux/device.h>
45#include <linux/of.h>
46#include <linux/of_device.h>
47#include <linux/of_gpio.h>
48#include <linux/of_net.h>
49#include <linux/acpi.h>
50#include <linux/pm_runtime.h>
51#include <linux/property.h>
52#include <linux/gpio/consumer.h>
53
54#include "smsc911x.h"
55
56#define SMSC_CHIPNAME "smsc911x"
57#define SMSC_MDIONAME "smsc911x-mdio"
58#define SMSC_DRV_VERSION "2008-10-21"
59
60MODULE_LICENSE("GPL");
61MODULE_VERSION(SMSC_DRV_VERSION);
62MODULE_ALIAS("platform:smsc911x");
63
64#if USE_DEBUG > 0
65static int debug = 16;
66#else
67static int debug = 3;
68#endif
69
70module_param(debug, int, 0);
71MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
72
73struct smsc911x_data;
74
75struct smsc911x_ops {
76 u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg);
77 void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val);
78 void (*rx_readfifo)(struct smsc911x_data *pdata,
79 unsigned int *buf, unsigned int wordcount);
80 void (*tx_writefifo)(struct smsc911x_data *pdata,
81 unsigned int *buf, unsigned int wordcount);
82};
83
84#define SMSC911X_NUM_SUPPLIES 2
85
86struct smsc911x_data {
87 void __iomem *ioaddr;
88
89 unsigned int idrev;
90
91 /* used to decide which workarounds apply */
92 unsigned int generation;
93
94 /* device configuration (copied from platform_data during probe) */
95 struct smsc911x_platform_config config;
96
97 /* This needs to be acquired before calling any of below:
98 * smsc911x_mac_read(), smsc911x_mac_write()
99 */
100 spinlock_t mac_lock;
101
102 /* spinlock to ensure register accesses are serialised */
103 spinlock_t dev_lock;
104
105 struct mii_bus *mii_bus;
106 unsigned int using_extphy;
107 int last_duplex;
108 int last_carrier;
109
110 u32 msg_enable;
111 unsigned int gpio_setting;
112 unsigned int gpio_orig_setting;
113 struct net_device *dev;
114 struct napi_struct napi;
115
116 unsigned int software_irq_signal;
117
118#ifdef USE_PHY_WORK_AROUND
119#define MIN_PACKET_SIZE (64)
120 char loopback_tx_pkt[MIN_PACKET_SIZE];
121 char loopback_rx_pkt[MIN_PACKET_SIZE];
122 unsigned int resetcount;
123#endif
124
125 /* Members for Multicast filter workaround */
126 unsigned int multicast_update_pending;
127 unsigned int set_bits_mask;
128 unsigned int clear_bits_mask;
129 unsigned int hashhi;
130 unsigned int hashlo;
131
132 /* register access functions */
133 const struct smsc911x_ops *ops;
134
135 /* regulators */
136 struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES];
137
138 /* Reset GPIO */
139 struct gpio_desc *reset_gpiod;
140
141 /* clock */
142 struct clk *clk;
143};
144
145/* Easy access to information */
146#define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift))
147
148static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
149{
150 if (pdata->config.flags & SMSC911X_USE_32BIT)
151 return readl(pdata->ioaddr + reg);
152
153 if (pdata->config.flags & SMSC911X_USE_16BIT)
154 return ((readw(pdata->ioaddr + reg) & 0xFFFF) |
155 ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16));
156
157 BUG();
158 return 0;
159}
160
161static inline u32
162__smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg)
163{
164 if (pdata->config.flags & SMSC911X_USE_32BIT)
165 return readl(pdata->ioaddr + __smsc_shift(pdata, reg));
166
167 if (pdata->config.flags & SMSC911X_USE_16BIT)
168 return (readw(pdata->ioaddr +
169 __smsc_shift(pdata, reg)) & 0xFFFF) |
170 ((readw(pdata->ioaddr +
171 __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16);
172
173 BUG();
174 return 0;
175}
176
177static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
178{
179 u32 data;
180 unsigned long flags;
181
182 spin_lock_irqsave(&pdata->dev_lock, flags);
183 data = pdata->ops->reg_read(pdata, reg);
184 spin_unlock_irqrestore(&pdata->dev_lock, flags);
185
186 return data;
187}
188
189static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
190 u32 val)
191{
192 if (pdata->config.flags & SMSC911X_USE_32BIT) {
193 writel(val, pdata->ioaddr + reg);
194 return;
195 }
196
197 if (pdata->config.flags & SMSC911X_USE_16BIT) {
198 writew(val & 0xFFFF, pdata->ioaddr + reg);
199 writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2);
200 return;
201 }
202
203 BUG();
204}
205
206static inline void
207__smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val)
208{
209 if (pdata->config.flags & SMSC911X_USE_32BIT) {
210 writel(val, pdata->ioaddr + __smsc_shift(pdata, reg));
211 return;
212 }
213
214 if (pdata->config.flags & SMSC911X_USE_16BIT) {
215 writew(val & 0xFFFF,
216 pdata->ioaddr + __smsc_shift(pdata, reg));
217 writew((val >> 16) & 0xFFFF,
218 pdata->ioaddr + __smsc_shift(pdata, reg + 2));
219 return;
220 }
221
222 BUG();
223}
224
225static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
226 u32 val)
227{
228 unsigned long flags;
229
230 spin_lock_irqsave(&pdata->dev_lock, flags);
231 pdata->ops->reg_write(pdata, reg, val);
232 spin_unlock_irqrestore(&pdata->dev_lock, flags);
233}
234
235/* Writes a packet to the TX_DATA_FIFO */
236static inline void
237smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
238 unsigned int wordcount)
239{
240 unsigned long flags;
241
242 spin_lock_irqsave(&pdata->dev_lock, flags);
243
244 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
245 while (wordcount--)
246 __smsc911x_reg_write(pdata, TX_DATA_FIFO,
247 swab32(*buf++));
248 goto out;
249 }
250
251 if (pdata->config.flags & SMSC911X_USE_32BIT) {
252 iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
253 goto out;
254 }
255
256 if (pdata->config.flags & SMSC911X_USE_16BIT) {
257 while (wordcount--)
258 __smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++);
259 goto out;
260 }
261
262 BUG();
263out:
264 spin_unlock_irqrestore(&pdata->dev_lock, flags);
265}
266
267/* Writes a packet to the TX_DATA_FIFO - shifted version */
268static inline void
269smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
270 unsigned int wordcount)
271{
272 unsigned long flags;
273
274 spin_lock_irqsave(&pdata->dev_lock, flags);
275
276 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
277 while (wordcount--)
278 __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO,
279 swab32(*buf++));
280 goto out;
281 }
282
283 if (pdata->config.flags & SMSC911X_USE_32BIT) {
284 iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata,
285 TX_DATA_FIFO), buf, wordcount);
286 goto out;
287 }
288
289 if (pdata->config.flags & SMSC911X_USE_16BIT) {
290 while (wordcount--)
291 __smsc911x_reg_write_shift(pdata,
292 TX_DATA_FIFO, *buf++);
293 goto out;
294 }
295
296 BUG();
297out:
298 spin_unlock_irqrestore(&pdata->dev_lock, flags);
299}
300
301/* Reads a packet out of the RX_DATA_FIFO */
302static inline void
303smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
304 unsigned int wordcount)
305{
306 unsigned long flags;
307
308 spin_lock_irqsave(&pdata->dev_lock, flags);
309
310 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
311 while (wordcount--)
312 *buf++ = swab32(__smsc911x_reg_read(pdata,
313 RX_DATA_FIFO));
314 goto out;
315 }
316
317 if (pdata->config.flags & SMSC911X_USE_32BIT) {
318 ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
319 goto out;
320 }
321
322 if (pdata->config.flags & SMSC911X_USE_16BIT) {
323 while (wordcount--)
324 *buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO);
325 goto out;
326 }
327
328 BUG();
329out:
330 spin_unlock_irqrestore(&pdata->dev_lock, flags);
331}
332
333/* Reads a packet out of the RX_DATA_FIFO - shifted version */
334static inline void
335smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
336 unsigned int wordcount)
337{
338 unsigned long flags;
339
340 spin_lock_irqsave(&pdata->dev_lock, flags);
341
342 if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
343 while (wordcount--)
344 *buf++ = swab32(__smsc911x_reg_read_shift(pdata,
345 RX_DATA_FIFO));
346 goto out;
347 }
348
349 if (pdata->config.flags & SMSC911X_USE_32BIT) {
350 ioread32_rep(pdata->ioaddr + __smsc_shift(pdata,
351 RX_DATA_FIFO), buf, wordcount);
352 goto out;
353 }
354
355 if (pdata->config.flags & SMSC911X_USE_16BIT) {
356 while (wordcount--)
357 *buf++ = __smsc911x_reg_read_shift(pdata,
358 RX_DATA_FIFO);
359 goto out;
360 }
361
362 BUG();
363out:
364 spin_unlock_irqrestore(&pdata->dev_lock, flags);
365}
366
367/*
368 * enable regulator and clock resources.
369 */
370static int smsc911x_enable_resources(struct platform_device *pdev)
371{
372 struct net_device *ndev = platform_get_drvdata(pdev);
373 struct smsc911x_data *pdata = netdev_priv(ndev);
374 int ret = 0;
375
376 ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies),
377 pdata->supplies);
378 if (ret)
379 netdev_err(ndev, "failed to enable regulators %d\n",
380 ret);
381
382 if (!IS_ERR(pdata->clk)) {
383 ret = clk_prepare_enable(pdata->clk);
384 if (ret < 0)
385 netdev_err(ndev, "failed to enable clock %d\n", ret);
386 }
387
388 return ret;
389}
390
391/*
392 * disable resources, currently just regulators.
393 */
394static int smsc911x_disable_resources(struct platform_device *pdev)
395{
396 struct net_device *ndev = platform_get_drvdata(pdev);
397 struct smsc911x_data *pdata = netdev_priv(ndev);
398 int ret = 0;
399
400 ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies),
401 pdata->supplies);
402
403 if (!IS_ERR(pdata->clk))
404 clk_disable_unprepare(pdata->clk);
405
406 return ret;
407}
408
409/*
410 * Request resources, currently just regulators.
411 *
412 * The SMSC911x has two power pins: vddvario and vdd33a, in designs where
413 * these are not always-on we need to request regulators to be turned on
414 * before we can try to access the device registers.
415 */
416static int smsc911x_request_resources(struct platform_device *pdev)
417{
418 struct net_device *ndev = platform_get_drvdata(pdev);
419 struct smsc911x_data *pdata = netdev_priv(ndev);
420 int ret = 0;
421
422 /* Request regulators */
423 pdata->supplies[0].supply = "vdd33a";
424 pdata->supplies[1].supply = "vddvario";
425 ret = regulator_bulk_get(&pdev->dev,
426 ARRAY_SIZE(pdata->supplies),
427 pdata->supplies);
428 if (ret) {
429 /*
430 * Retry on deferrals, else just report the error
431 * and try to continue.
432 */
433 if (ret == -EPROBE_DEFER)
434 return ret;
435 netdev_err(ndev, "couldn't get regulators %d\n",
436 ret);
437 }
438
439 /* Request optional RESET GPIO */
440 pdata->reset_gpiod = devm_gpiod_get_optional(&pdev->dev,
441 "reset",
442 GPIOD_OUT_LOW);
443
444 /* Request clock */
445 pdata->clk = clk_get(&pdev->dev, NULL);
446 if (IS_ERR(pdata->clk))
447 dev_dbg(&pdev->dev, "couldn't get clock %li\n",
448 PTR_ERR(pdata->clk));
449
450 return ret;
451}
452
453/*
454 * Free resources, currently just regulators.
455 *
456 */
457static void smsc911x_free_resources(struct platform_device *pdev)
458{
459 struct net_device *ndev = platform_get_drvdata(pdev);
460 struct smsc911x_data *pdata = netdev_priv(ndev);
461
462 /* Free regulators */
463 regulator_bulk_free(ARRAY_SIZE(pdata->supplies),
464 pdata->supplies);
465
466 /* Free clock */
467 if (!IS_ERR(pdata->clk)) {
468 clk_put(pdata->clk);
469 pdata->clk = NULL;
470 }
471}
472
473/* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read
474 * and smsc911x_mac_write, so assumes mac_lock is held */
475static int smsc911x_mac_complete(struct smsc911x_data *pdata)
476{
477 int i;
478 u32 val;
479
480 SMSC_ASSERT_MAC_LOCK(pdata);
481
482 for (i = 0; i < 40; i++) {
483 val = smsc911x_reg_read(pdata, MAC_CSR_CMD);
484 if (!(val & MAC_CSR_CMD_CSR_BUSY_))
485 return 0;
486 }
487 SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. "
488 "MAC_CSR_CMD: 0x%08X", val);
489 return -EIO;
490}
491
492/* Fetches a MAC register value. Assumes mac_lock is acquired */
493static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset)
494{
495 unsigned int temp;
496
497 SMSC_ASSERT_MAC_LOCK(pdata);
498
499 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
500 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
501 SMSC_WARN(pdata, hw, "MAC busy at entry");
502 return 0xFFFFFFFF;
503 }
504
505 /* Send the MAC cmd */
506 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
507 MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_));
508
509 /* Workaround for hardware read-after-write restriction */
510 temp = smsc911x_reg_read(pdata, BYTE_TEST);
511
512 /* Wait for the read to complete */
513 if (likely(smsc911x_mac_complete(pdata) == 0))
514 return smsc911x_reg_read(pdata, MAC_CSR_DATA);
515
516 SMSC_WARN(pdata, hw, "MAC busy after read");
517 return 0xFFFFFFFF;
518}
519
520/* Set a mac register, mac_lock must be acquired before calling */
521static void smsc911x_mac_write(struct smsc911x_data *pdata,
522 unsigned int offset, u32 val)
523{
524 unsigned int temp;
525
526 SMSC_ASSERT_MAC_LOCK(pdata);
527
528 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
529 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
530 SMSC_WARN(pdata, hw,
531 "smsc911x_mac_write failed, MAC busy at entry");
532 return;
533 }
534
535 /* Send data to write */
536 smsc911x_reg_write(pdata, MAC_CSR_DATA, val);
537
538 /* Write the actual data */
539 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
540 MAC_CSR_CMD_CSR_BUSY_));
541
542 /* Workaround for hardware read-after-write restriction */
543 temp = smsc911x_reg_read(pdata, BYTE_TEST);
544
545 /* Wait for the write to complete */
546 if (likely(smsc911x_mac_complete(pdata) == 0))
547 return;
548
549 SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write");
550}
551
552/* Get a phy register */
553static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
554{
555 struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv;
556 unsigned long flags;
557 unsigned int addr;
558 int i, reg;
559
560 pm_runtime_get_sync(bus->parent);
561 spin_lock_irqsave(&pdata->mac_lock, flags);
562
563 /* Confirm MII not busy */
564 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
565 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???");
566 reg = -EIO;
567 goto out;
568 }
569
570 /* Set the address, index & direction (read from PHY) */
571 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6);
572 smsc911x_mac_write(pdata, MII_ACC, addr);
573
574 /* Wait for read to complete w/ timeout */
575 for (i = 0; i < 100; i++)
576 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
577 reg = smsc911x_mac_read(pdata, MII_DATA);
578 goto out;
579 }
580
581 SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish");
582 reg = -EIO;
583
584out:
585 spin_unlock_irqrestore(&pdata->mac_lock, flags);
586 pm_runtime_put(bus->parent);
587 return reg;
588}
589
590/* Set a phy register */
591static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
592 u16 val)
593{
594 struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv;
595 unsigned long flags;
596 unsigned int addr;
597 int i, reg;
598
599 pm_runtime_get_sync(bus->parent);
600 spin_lock_irqsave(&pdata->mac_lock, flags);
601
602 /* Confirm MII not busy */
603 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
604 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???");
605 reg = -EIO;
606 goto out;
607 }
608
609 /* Put the data to write in the MAC */
610 smsc911x_mac_write(pdata, MII_DATA, val);
611
612 /* Set the address, index & direction (write to PHY) */
613 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) |
614 MII_ACC_MII_WRITE_;
615 smsc911x_mac_write(pdata, MII_ACC, addr);
616
617 /* Wait for write to complete w/ timeout */
618 for (i = 0; i < 100; i++)
619 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
620 reg = 0;
621 goto out;
622 }
623
624 SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish");
625 reg = -EIO;
626
627out:
628 spin_unlock_irqrestore(&pdata->mac_lock, flags);
629 pm_runtime_put(bus->parent);
630 return reg;
631}
632
633/* Switch to external phy. Assumes tx and rx are stopped. */
634static void smsc911x_phy_enable_external(struct smsc911x_data *pdata)
635{
636 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
637
638 /* Disable phy clocks to the MAC */
639 hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
640 hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
641 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
642 udelay(10); /* Enough time for clocks to stop */
643
644 /* Switch to external phy */
645 hwcfg |= HW_CFG_EXT_PHY_EN_;
646 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
647
648 /* Enable phy clocks to the MAC */
649 hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
650 hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
651 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
652 udelay(10); /* Enough time for clocks to restart */
653
654 hwcfg |= HW_CFG_SMI_SEL_;
655 smsc911x_reg_write(pdata, HW_CFG, hwcfg);
656}
657
658/* Autodetects and enables external phy if present on supported chips.
659 * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY
660 * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */
661static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
662{
663 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
664
665 if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
666 SMSC_TRACE(pdata, hw, "Forcing internal PHY");
667 pdata->using_extphy = 0;
668 } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
669 SMSC_TRACE(pdata, hw, "Forcing external PHY");
670 smsc911x_phy_enable_external(pdata);
671 pdata->using_extphy = 1;
672 } else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
673 SMSC_TRACE(pdata, hw,
674 "HW_CFG EXT_PHY_DET set, using external PHY");
675 smsc911x_phy_enable_external(pdata);
676 pdata->using_extphy = 1;
677 } else {
678 SMSC_TRACE(pdata, hw,
679 "HW_CFG EXT_PHY_DET clear, using internal PHY");
680 pdata->using_extphy = 0;
681 }
682}
683
684/* Fetches a tx status out of the status fifo */
685static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata)
686{
687 unsigned int result =
688 smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_;
689
690 if (result != 0)
691 result = smsc911x_reg_read(pdata, TX_STATUS_FIFO);
692
693 return result;
694}
695
696/* Fetches the next rx status */
697static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata)
698{
699 unsigned int result =
700 smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_;
701
702 if (result != 0)
703 result = smsc911x_reg_read(pdata, RX_STATUS_FIFO);
704
705 return result;
706}
707
708#ifdef USE_PHY_WORK_AROUND
709static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
710{
711 unsigned int tries;
712 u32 wrsz;
713 u32 rdsz;
714 ulong bufp;
715
716 for (tries = 0; tries < 10; tries++) {
717 unsigned int txcmd_a;
718 unsigned int txcmd_b;
719 unsigned int status;
720 unsigned int pktlength;
721 unsigned int i;
722
723 /* Zero-out rx packet memory */
724 memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE);
725
726 /* Write tx packet to 118 */
727 txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16;
728 txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
729 txcmd_a |= MIN_PACKET_SIZE;
730
731 txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE;
732
733 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a);
734 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b);
735
736 bufp = (ulong)pdata->loopback_tx_pkt & (~0x3);
737 wrsz = MIN_PACKET_SIZE + 3;
738 wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3);
739 wrsz >>= 2;
740
741 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
742
743 /* Wait till transmit is done */
744 i = 60;
745 do {
746 udelay(5);
747 status = smsc911x_tx_get_txstatus(pdata);
748 } while ((i--) && (!status));
749
750 if (!status) {
751 SMSC_WARN(pdata, hw,
752 "Failed to transmit during loopback test");
753 continue;
754 }
755 if (status & TX_STS_ES_) {
756 SMSC_WARN(pdata, hw,
757 "Transmit encountered errors during loopback test");
758 continue;
759 }
760
761 /* Wait till receive is done */
762 i = 60;
763 do {
764 udelay(5);
765 status = smsc911x_rx_get_rxstatus(pdata);
766 } while ((i--) && (!status));
767
768 if (!status) {
769 SMSC_WARN(pdata, hw,
770 "Failed to receive during loopback test");
771 continue;
772 }
773 if (status & RX_STS_ES_) {
774 SMSC_WARN(pdata, hw,
775 "Receive encountered errors during loopback test");
776 continue;
777 }
778
779 pktlength = ((status & 0x3FFF0000UL) >> 16);
780 bufp = (ulong)pdata->loopback_rx_pkt;
781 rdsz = pktlength + 3;
782 rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3);
783 rdsz >>= 2;
784
785 pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
786
787 if (pktlength != (MIN_PACKET_SIZE + 4)) {
788 SMSC_WARN(pdata, hw, "Unexpected packet size "
789 "during loop back test, size=%d, will retry",
790 pktlength);
791 } else {
792 unsigned int j;
793 int mismatch = 0;
794 for (j = 0; j < MIN_PACKET_SIZE; j++) {
795 if (pdata->loopback_tx_pkt[j]
796 != pdata->loopback_rx_pkt[j]) {
797 mismatch = 1;
798 break;
799 }
800 }
801 if (!mismatch) {
802 SMSC_TRACE(pdata, hw, "Successfully verified "
803 "loopback packet");
804 return 0;
805 } else {
806 SMSC_WARN(pdata, hw, "Data mismatch "
807 "during loop back test, will retry");
808 }
809 }
810 }
811
812 return -EIO;
813}
814
815static int smsc911x_phy_reset(struct smsc911x_data *pdata)
816{
817 unsigned int temp;
818 unsigned int i = 100000;
819
820 temp = smsc911x_reg_read(pdata, PMT_CTRL);
821 smsc911x_reg_write(pdata, PMT_CTRL, temp | PMT_CTRL_PHY_RST_);
822 do {
823 msleep(1);
824 temp = smsc911x_reg_read(pdata, PMT_CTRL);
825 } while ((i--) && (temp & PMT_CTRL_PHY_RST_));
826
827 if (unlikely(temp & PMT_CTRL_PHY_RST_)) {
828 SMSC_WARN(pdata, hw, "PHY reset failed to complete");
829 return -EIO;
830 }
831 /* Extra delay required because the phy may not be completed with
832 * its reset when BMCR_RESET is cleared. Specs say 256 uS is
833 * enough delay but using 1ms here to be safe */
834 msleep(1);
835
836 return 0;
837}
838
839static int smsc911x_phy_loopbacktest(struct net_device *dev)
840{
841 struct smsc911x_data *pdata = netdev_priv(dev);
842 struct phy_device *phy_dev = dev->phydev;
843 int result = -EIO;
844 unsigned int i, val;
845 unsigned long flags;
846
847 /* Initialise tx packet using broadcast destination address */
848 eth_broadcast_addr(pdata->loopback_tx_pkt);
849
850 /* Use incrementing source address */
851 for (i = 6; i < 12; i++)
852 pdata->loopback_tx_pkt[i] = (char)i;
853
854 /* Set length type field */
855 pdata->loopback_tx_pkt[12] = 0x00;
856 pdata->loopback_tx_pkt[13] = 0x00;
857
858 for (i = 14; i < MIN_PACKET_SIZE; i++)
859 pdata->loopback_tx_pkt[i] = (char)i;
860
861 val = smsc911x_reg_read(pdata, HW_CFG);
862 val &= HW_CFG_TX_FIF_SZ_;
863 val |= HW_CFG_SF_;
864 smsc911x_reg_write(pdata, HW_CFG, val);
865
866 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
867 smsc911x_reg_write(pdata, RX_CFG,
868 (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8);
869
870 for (i = 0; i < 10; i++) {
871 /* Set PHY to 10/FD, no ANEG, and loopback mode */
872 smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr,
873 MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX);
874
875 /* Enable MAC tx/rx, FD */
876 spin_lock_irqsave(&pdata->mac_lock, flags);
877 smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_
878 | MAC_CR_TXEN_ | MAC_CR_RXEN_);
879 spin_unlock_irqrestore(&pdata->mac_lock, flags);
880
881 if (smsc911x_phy_check_loopbackpkt(pdata) == 0) {
882 result = 0;
883 break;
884 }
885 pdata->resetcount++;
886
887 /* Disable MAC rx */
888 spin_lock_irqsave(&pdata->mac_lock, flags);
889 smsc911x_mac_write(pdata, MAC_CR, 0);
890 spin_unlock_irqrestore(&pdata->mac_lock, flags);
891
892 smsc911x_phy_reset(pdata);
893 }
894
895 /* Disable MAC */
896 spin_lock_irqsave(&pdata->mac_lock, flags);
897 smsc911x_mac_write(pdata, MAC_CR, 0);
898 spin_unlock_irqrestore(&pdata->mac_lock, flags);
899
900 /* Cancel PHY loopback mode */
901 smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr, MII_BMCR, 0);
902
903 smsc911x_reg_write(pdata, TX_CFG, 0);
904 smsc911x_reg_write(pdata, RX_CFG, 0);
905
906 return result;
907}
908#endif /* USE_PHY_WORK_AROUND */
909
910static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata)
911{
912 struct net_device *ndev = pdata->dev;
913 struct phy_device *phy_dev = ndev->phydev;
914 u32 afc = smsc911x_reg_read(pdata, AFC_CFG);
915 u32 flow;
916 unsigned long flags;
917
918 if (phy_dev->duplex == DUPLEX_FULL) {
919 u16 lcladv = phy_read(phy_dev, MII_ADVERTISE);
920 u16 rmtadv = phy_read(phy_dev, MII_LPA);
921 u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
922
923 if (cap & FLOW_CTRL_RX)
924 flow = 0xFFFF0002;
925 else
926 flow = 0;
927
928 if (cap & FLOW_CTRL_TX)
929 afc |= 0xF;
930 else
931 afc &= ~0xF;
932
933 SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s",
934 (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
935 (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
936 } else {
937 SMSC_TRACE(pdata, hw, "half duplex");
938 flow = 0;
939 afc |= 0xF;
940 }
941
942 spin_lock_irqsave(&pdata->mac_lock, flags);
943 smsc911x_mac_write(pdata, FLOW, flow);
944 spin_unlock_irqrestore(&pdata->mac_lock, flags);
945
946 smsc911x_reg_write(pdata, AFC_CFG, afc);
947}
948
949/* Update link mode if anything has changed. Called periodically when the
950 * PHY is in polling mode, even if nothing has changed. */
951static void smsc911x_phy_adjust_link(struct net_device *dev)
952{
953 struct smsc911x_data *pdata = netdev_priv(dev);
954 struct phy_device *phy_dev = dev->phydev;
955 unsigned long flags;
956 int carrier;
957
958 if (phy_dev->duplex != pdata->last_duplex) {
959 unsigned int mac_cr;
960 SMSC_TRACE(pdata, hw, "duplex state has changed");
961
962 spin_lock_irqsave(&pdata->mac_lock, flags);
963 mac_cr = smsc911x_mac_read(pdata, MAC_CR);
964 if (phy_dev->duplex) {
965 SMSC_TRACE(pdata, hw,
966 "configuring for full duplex mode");
967 mac_cr |= MAC_CR_FDPX_;
968 } else {
969 SMSC_TRACE(pdata, hw,
970 "configuring for half duplex mode");
971 mac_cr &= ~MAC_CR_FDPX_;
972 }
973 smsc911x_mac_write(pdata, MAC_CR, mac_cr);
974 spin_unlock_irqrestore(&pdata->mac_lock, flags);
975
976 smsc911x_phy_update_flowcontrol(pdata);
977 pdata->last_duplex = phy_dev->duplex;
978 }
979
980 carrier = netif_carrier_ok(dev);
981 if (carrier != pdata->last_carrier) {
982 SMSC_TRACE(pdata, hw, "carrier state has changed");
983 if (carrier) {
984 SMSC_TRACE(pdata, hw, "configuring for carrier OK");
985 if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
986 (!pdata->using_extphy)) {
987 /* Restore original GPIO configuration */
988 pdata->gpio_setting = pdata->gpio_orig_setting;
989 smsc911x_reg_write(pdata, GPIO_CFG,
990 pdata->gpio_setting);
991 }
992 } else {
993 SMSC_TRACE(pdata, hw, "configuring for no carrier");
994 /* Check global setting that LED1
995 * usage is 10/100 indicator */
996 pdata->gpio_setting = smsc911x_reg_read(pdata,
997 GPIO_CFG);
998 if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) &&
999 (!pdata->using_extphy)) {
1000 /* Force 10/100 LED off, after saving
1001 * original GPIO configuration */
1002 pdata->gpio_orig_setting = pdata->gpio_setting;
1003
1004 pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_;
1005 pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_
1006 | GPIO_CFG_GPIODIR0_
1007 | GPIO_CFG_GPIOD0_);
1008 smsc911x_reg_write(pdata, GPIO_CFG,
1009 pdata->gpio_setting);
1010 }
1011 }
1012 pdata->last_carrier = carrier;
1013 }
1014}
1015
1016static int smsc911x_mii_probe(struct net_device *dev)
1017{
1018 struct smsc911x_data *pdata = netdev_priv(dev);
1019 struct phy_device *phydev = NULL;
1020 int ret;
1021
1022 /* find the first phy */
1023 phydev = phy_find_first(pdata->mii_bus);
1024 if (!phydev) {
1025 netdev_err(dev, "no PHY found\n");
1026 return -ENODEV;
1027 }
1028
1029 SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X",
1030 phydev->mdio.addr, phydev->phy_id);
1031
1032 ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link,
1033 pdata->config.phy_interface);
1034
1035 if (ret) {
1036 netdev_err(dev, "Could not attach to PHY\n");
1037 return ret;
1038 }
1039
1040 phy_attached_info(phydev);
1041
1042 phy_set_max_speed(phydev, SPEED_100);
1043
1044 /* mask with MAC supported features */
1045 phy_support_asym_pause(phydev);
1046
1047 pdata->last_duplex = -1;
1048 pdata->last_carrier = -1;
1049
1050#ifdef USE_PHY_WORK_AROUND
1051 if (smsc911x_phy_loopbacktest(dev) < 0) {
1052 SMSC_WARN(pdata, hw, "Failed Loop Back Test");
1053 phy_disconnect(phydev);
1054 return -ENODEV;
1055 }
1056 SMSC_TRACE(pdata, hw, "Passed Loop Back Test");
1057#endif /* USE_PHY_WORK_AROUND */
1058
1059 SMSC_TRACE(pdata, hw, "phy initialised successfully");
1060 return 0;
1061}
1062
1063static int smsc911x_mii_init(struct platform_device *pdev,
1064 struct net_device *dev)
1065{
1066 struct smsc911x_data *pdata = netdev_priv(dev);
1067 int err = -ENXIO;
1068
1069 pdata->mii_bus = mdiobus_alloc();
1070 if (!pdata->mii_bus) {
1071 err = -ENOMEM;
1072 goto err_out_1;
1073 }
1074
1075 pdata->mii_bus->name = SMSC_MDIONAME;
1076 snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
1077 pdev->name, pdev->id);
1078 pdata->mii_bus->priv = pdata;
1079 pdata->mii_bus->read = smsc911x_mii_read;
1080 pdata->mii_bus->write = smsc911x_mii_write;
1081
1082 pdata->mii_bus->parent = &pdev->dev;
1083
1084 switch (pdata->idrev & 0xFFFF0000) {
1085 case 0x01170000:
1086 case 0x01150000:
1087 case 0x117A0000:
1088 case 0x115A0000:
1089 /* External PHY supported, try to autodetect */
1090 smsc911x_phy_initialise_external(pdata);
1091 break;
1092 default:
1093 SMSC_TRACE(pdata, hw, "External PHY is not supported, "
1094 "using internal PHY");
1095 pdata->using_extphy = 0;
1096 break;
1097 }
1098
1099 if (!pdata->using_extphy) {
1100 /* Mask all PHYs except ID 1 (internal) */
1101 pdata->mii_bus->phy_mask = ~(1 << 1);
1102 }
1103
1104 if (mdiobus_register(pdata->mii_bus)) {
1105 SMSC_WARN(pdata, probe, "Error registering mii bus");
1106 goto err_out_free_bus_2;
1107 }
1108
1109 return 0;
1110
1111err_out_free_bus_2:
1112 mdiobus_free(pdata->mii_bus);
1113err_out_1:
1114 return err;
1115}
1116
1117/* Gets the number of tx statuses in the fifo */
1118static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata)
1119{
1120 return (smsc911x_reg_read(pdata, TX_FIFO_INF)
1121 & TX_FIFO_INF_TSUSED_) >> 16;
1122}
1123
1124/* Reads tx statuses and increments counters where necessary */
1125static void smsc911x_tx_update_txcounters(struct net_device *dev)
1126{
1127 struct smsc911x_data *pdata = netdev_priv(dev);
1128 unsigned int tx_stat;
1129
1130 while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) {
1131 if (unlikely(tx_stat & 0x80000000)) {
1132 /* In this driver the packet tag is used as the packet
1133 * length. Since a packet length can never reach the
1134 * size of 0x8000, this bit is reserved. It is worth
1135 * noting that the "reserved bit" in the warning above
1136 * does not reference a hardware defined reserved bit
1137 * but rather a driver defined one.
1138 */
1139 SMSC_WARN(pdata, hw, "Packet tag reserved bit is high");
1140 } else {
1141 if (unlikely(tx_stat & TX_STS_ES_)) {
1142 dev->stats.tx_errors++;
1143 } else {
1144 dev->stats.tx_packets++;
1145 dev->stats.tx_bytes += (tx_stat >> 16);
1146 }
1147 if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) {
1148 dev->stats.collisions += 16;
1149 dev->stats.tx_aborted_errors += 1;
1150 } else {
1151 dev->stats.collisions +=
1152 ((tx_stat >> 3) & 0xF);
1153 }
1154 if (unlikely(tx_stat & TX_STS_LOST_CARRIER_))
1155 dev->stats.tx_carrier_errors += 1;
1156 if (unlikely(tx_stat & TX_STS_LATE_COL_)) {
1157 dev->stats.collisions++;
1158 dev->stats.tx_aborted_errors++;
1159 }
1160 }
1161 }
1162}
1163
1164/* Increments the Rx error counters */
1165static void
1166smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat)
1167{
1168 int crc_err = 0;
1169
1170 if (unlikely(rxstat & RX_STS_ES_)) {
1171 dev->stats.rx_errors++;
1172 if (unlikely(rxstat & RX_STS_CRC_ERR_)) {
1173 dev->stats.rx_crc_errors++;
1174 crc_err = 1;
1175 }
1176 }
1177 if (likely(!crc_err)) {
1178 if (unlikely((rxstat & RX_STS_FRAME_TYPE_) &&
1179 (rxstat & RX_STS_LENGTH_ERR_)))
1180 dev->stats.rx_length_errors++;
1181 if (rxstat & RX_STS_MCAST_)
1182 dev->stats.multicast++;
1183 }
1184}
1185
1186/* Quickly dumps bad packets */
1187static void
1188smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords)
1189{
1190 if (likely(pktwords >= 4)) {
1191 unsigned int timeout = 500;
1192 unsigned int val;
1193 smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_);
1194 do {
1195 udelay(1);
1196 val = smsc911x_reg_read(pdata, RX_DP_CTRL);
1197 } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout);
1198
1199 if (unlikely(timeout == 0))
1200 SMSC_WARN(pdata, hw, "Timed out waiting for "
1201 "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
1202 } else {
1203 while (pktwords--)
1204 smsc911x_reg_read(pdata, RX_DATA_FIFO);
1205 }
1206}
1207
1208/* NAPI poll function */
1209static int smsc911x_poll(struct napi_struct *napi, int budget)
1210{
1211 struct smsc911x_data *pdata =
1212 container_of(napi, struct smsc911x_data, napi);
1213 struct net_device *dev = pdata->dev;
1214 int npackets = 0;
1215
1216 while (npackets < budget) {
1217 unsigned int pktlength;
1218 unsigned int pktwords;
1219 struct sk_buff *skb;
1220 unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata);
1221
1222 if (!rxstat) {
1223 unsigned int temp;
1224 /* We processed all packets available. Tell NAPI it can
1225 * stop polling then re-enable rx interrupts */
1226 smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_);
1227 napi_complete(napi);
1228 temp = smsc911x_reg_read(pdata, INT_EN);
1229 temp |= INT_EN_RSFL_EN_;
1230 smsc911x_reg_write(pdata, INT_EN, temp);
1231 break;
1232 }
1233
1234 /* Count packet for NAPI scheduling, even if it has an error.
1235 * Error packets still require cycles to discard */
1236 npackets++;
1237
1238 pktlength = ((rxstat & 0x3FFF0000) >> 16);
1239 pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2;
1240 smsc911x_rx_counterrors(dev, rxstat);
1241
1242 if (unlikely(rxstat & RX_STS_ES_)) {
1243 SMSC_WARN(pdata, rx_err,
1244 "Discarding packet with error bit set");
1245 /* Packet has an error, discard it and continue with
1246 * the next */
1247 smsc911x_rx_fastforward(pdata, pktwords);
1248 dev->stats.rx_dropped++;
1249 continue;
1250 }
1251
1252 skb = netdev_alloc_skb(dev, pktwords << 2);
1253 if (unlikely(!skb)) {
1254 SMSC_WARN(pdata, rx_err,
1255 "Unable to allocate skb for rx packet");
1256 /* Drop the packet and stop this polling iteration */
1257 smsc911x_rx_fastforward(pdata, pktwords);
1258 dev->stats.rx_dropped++;
1259 break;
1260 }
1261
1262 pdata->ops->rx_readfifo(pdata,
1263 (unsigned int *)skb->data, pktwords);
1264
1265 /* Align IP on 16B boundary */
1266 skb_reserve(skb, NET_IP_ALIGN);
1267 skb_put(skb, pktlength - 4);
1268 skb->protocol = eth_type_trans(skb, dev);
1269 skb_checksum_none_assert(skb);
1270 netif_receive_skb(skb);
1271
1272 /* Update counters */
1273 dev->stats.rx_packets++;
1274 dev->stats.rx_bytes += (pktlength - 4);
1275 }
1276
1277 /* Return total received packets */
1278 return npackets;
1279}
1280
1281/* Returns hash bit number for given MAC address
1282 * Example:
1283 * 01 00 5E 00 00 01 -> returns bit number 31 */
1284static unsigned int smsc911x_hash(char addr[ETH_ALEN])
1285{
1286 return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
1287}
1288
1289static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata)
1290{
1291 /* Performs the multicast & mac_cr update. This is called when
1292 * safe on the current hardware, and with the mac_lock held */
1293 unsigned int mac_cr;
1294
1295 SMSC_ASSERT_MAC_LOCK(pdata);
1296
1297 mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1298 mac_cr |= pdata->set_bits_mask;
1299 mac_cr &= ~(pdata->clear_bits_mask);
1300 smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1301 smsc911x_mac_write(pdata, HASHH, pdata->hashhi);
1302 smsc911x_mac_write(pdata, HASHL, pdata->hashlo);
1303 SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
1304 mac_cr, pdata->hashhi, pdata->hashlo);
1305}
1306
1307static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata)
1308{
1309 unsigned int mac_cr;
1310
1311 /* This function is only called for older LAN911x devices
1312 * (revA or revB), where MAC_CR, HASHH and HASHL should not
1313 * be modified during Rx - newer devices immediately update the
1314 * registers.
1315 *
1316 * This is called from interrupt context */
1317
1318 spin_lock(&pdata->mac_lock);
1319
1320 /* Check Rx has stopped */
1321 if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_)
1322 SMSC_WARN(pdata, drv, "Rx not stopped");
1323
1324 /* Perform the update - safe to do now Rx has stopped */
1325 smsc911x_rx_multicast_update(pdata);
1326
1327 /* Re-enable Rx */
1328 mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1329 mac_cr |= MAC_CR_RXEN_;
1330 smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1331
1332 pdata->multicast_update_pending = 0;
1333
1334 spin_unlock(&pdata->mac_lock);
1335}
1336
1337static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata)
1338{
1339 struct net_device *ndev = pdata->dev;
1340 struct phy_device *phy_dev = ndev->phydev;
1341 int rc = 0;
1342
1343 if (!phy_dev)
1344 return rc;
1345
1346 /* If the internal PHY is in General Power-Down mode, all, except the
1347 * management interface, is powered-down and stays in that condition as
1348 * long as Phy register bit 0.11 is HIGH.
1349 *
1350 * In that case, clear the bit 0.11, so the PHY powers up and we can
1351 * access to the phy registers.
1352 */
1353 rc = phy_read(phy_dev, MII_BMCR);
1354 if (rc < 0) {
1355 SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1356 return rc;
1357 }
1358
1359 /* If the PHY general power-down bit is not set is not necessary to
1360 * disable the general power down-mode.
1361 */
1362 if (rc & BMCR_PDOWN) {
1363 rc = phy_write(phy_dev, MII_BMCR, rc & ~BMCR_PDOWN);
1364 if (rc < 0) {
1365 SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1366 return rc;
1367 }
1368
1369 usleep_range(1000, 1500);
1370 }
1371
1372 return 0;
1373}
1374
1375static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata)
1376{
1377 struct net_device *ndev = pdata->dev;
1378 struct phy_device *phy_dev = ndev->phydev;
1379 int rc = 0;
1380
1381 if (!phy_dev)
1382 return rc;
1383
1384 rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1385
1386 if (rc < 0) {
1387 SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1388 return rc;
1389 }
1390
1391 /* Only disable if energy detect mode is already enabled */
1392 if (rc & MII_LAN83C185_EDPWRDOWN) {
1393 /* Disable energy detect mode for this SMSC Transceivers */
1394 rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1395 rc & (~MII_LAN83C185_EDPWRDOWN));
1396
1397 if (rc < 0) {
1398 SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1399 return rc;
1400 }
1401 /* Allow PHY to wakeup */
1402 mdelay(2);
1403 }
1404
1405 return 0;
1406}
1407
1408static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata)
1409{
1410 struct net_device *ndev = pdata->dev;
1411 struct phy_device *phy_dev = ndev->phydev;
1412 int rc = 0;
1413
1414 if (!phy_dev)
1415 return rc;
1416
1417 rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1418
1419 if (rc < 0) {
1420 SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1421 return rc;
1422 }
1423
1424 /* Only enable if energy detect mode is already disabled */
1425 if (!(rc & MII_LAN83C185_EDPWRDOWN)) {
1426 /* Enable energy detect mode for this SMSC Transceivers */
1427 rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1428 rc | MII_LAN83C185_EDPWRDOWN);
1429
1430 if (rc < 0) {
1431 SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1432 return rc;
1433 }
1434 }
1435 return 0;
1436}
1437
1438static int smsc911x_soft_reset(struct smsc911x_data *pdata)
1439{
1440 unsigned int timeout;
1441 unsigned int temp;
1442 int ret;
1443 unsigned int reset_offset = HW_CFG;
1444 unsigned int reset_mask = HW_CFG_SRST_;
1445
1446 /*
1447 * Make sure to power-up the PHY chip before doing a reset, otherwise
1448 * the reset fails.
1449 */
1450 ret = smsc911x_phy_general_power_up(pdata);
1451 if (ret) {
1452 SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip");
1453 return ret;
1454 }
1455
1456 /*
1457 * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that
1458 * are initialized in a Energy Detect Power-Down mode that prevents
1459 * the MAC chip to be software reseted. So we have to wakeup the PHY
1460 * before.
1461 */
1462 if (pdata->generation == 4) {
1463 ret = smsc911x_phy_disable_energy_detect(pdata);
1464
1465 if (ret) {
1466 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1467 return ret;
1468 }
1469 }
1470
1471 if ((pdata->idrev & 0xFFFF0000) == LAN9250) {
1472 /* special reset for LAN9250 */
1473 reset_offset = RESET_CTL;
1474 reset_mask = RESET_CTL_DIGITAL_RST_;
1475 }
1476
1477 /* Reset the LAN911x */
1478 smsc911x_reg_write(pdata, reset_offset, reset_mask);
1479
1480 /* verify reset bit is cleared */
1481 timeout = 10;
1482 do {
1483 udelay(10);
1484 temp = smsc911x_reg_read(pdata, reset_offset);
1485 } while ((--timeout) && (temp & reset_mask));
1486
1487 if (unlikely(temp & reset_mask)) {
1488 SMSC_WARN(pdata, drv, "Failed to complete reset");
1489 return -EIO;
1490 }
1491
1492 if (pdata->generation == 4) {
1493 ret = smsc911x_phy_enable_energy_detect(pdata);
1494
1495 if (ret) {
1496 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1497 return ret;
1498 }
1499 }
1500
1501 return 0;
1502}
1503
1504/* Sets the device MAC address to dev_addr, called with mac_lock held */
1505static void
1506smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6])
1507{
1508 u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4];
1509 u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) |
1510 (dev_addr[1] << 8) | dev_addr[0];
1511
1512 SMSC_ASSERT_MAC_LOCK(pdata);
1513
1514 smsc911x_mac_write(pdata, ADDRH, mac_high16);
1515 smsc911x_mac_write(pdata, ADDRL, mac_low32);
1516}
1517
1518static void smsc911x_disable_irq_chip(struct net_device *dev)
1519{
1520 struct smsc911x_data *pdata = netdev_priv(dev);
1521
1522 smsc911x_reg_write(pdata, INT_EN, 0);
1523 smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
1524}
1525
1526static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
1527{
1528 struct net_device *dev = dev_id;
1529 struct smsc911x_data *pdata = netdev_priv(dev);
1530 u32 intsts = smsc911x_reg_read(pdata, INT_STS);
1531 u32 inten = smsc911x_reg_read(pdata, INT_EN);
1532 int serviced = IRQ_NONE;
1533 u32 temp;
1534
1535 if (unlikely(intsts & inten & INT_STS_SW_INT_)) {
1536 temp = smsc911x_reg_read(pdata, INT_EN);
1537 temp &= (~INT_EN_SW_INT_EN_);
1538 smsc911x_reg_write(pdata, INT_EN, temp);
1539 smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_);
1540 pdata->software_irq_signal = 1;
1541 smp_wmb();
1542 serviced = IRQ_HANDLED;
1543 }
1544
1545 if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) {
1546 /* Called when there is a multicast update scheduled and
1547 * it is now safe to complete the update */
1548 SMSC_TRACE(pdata, intr, "RX Stop interrupt");
1549 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
1550 if (pdata->multicast_update_pending)
1551 smsc911x_rx_multicast_update_workaround(pdata);
1552 serviced = IRQ_HANDLED;
1553 }
1554
1555 if (intsts & inten & INT_STS_TDFA_) {
1556 temp = smsc911x_reg_read(pdata, FIFO_INT);
1557 temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1558 smsc911x_reg_write(pdata, FIFO_INT, temp);
1559 smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_);
1560 netif_wake_queue(dev);
1561 serviced = IRQ_HANDLED;
1562 }
1563
1564 if (unlikely(intsts & inten & INT_STS_RXE_)) {
1565 SMSC_TRACE(pdata, intr, "RX Error interrupt");
1566 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_);
1567 serviced = IRQ_HANDLED;
1568 }
1569
1570 if (likely(intsts & inten & INT_STS_RSFL_)) {
1571 if (likely(napi_schedule_prep(&pdata->napi))) {
1572 /* Disable Rx interrupts */
1573 temp = smsc911x_reg_read(pdata, INT_EN);
1574 temp &= (~INT_EN_RSFL_EN_);
1575 smsc911x_reg_write(pdata, INT_EN, temp);
1576 /* Schedule a NAPI poll */
1577 __napi_schedule(&pdata->napi);
1578 } else {
1579 SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed");
1580 }
1581 serviced = IRQ_HANDLED;
1582 }
1583
1584 return serviced;
1585}
1586
1587static int smsc911x_open(struct net_device *dev)
1588{
1589 struct smsc911x_data *pdata = netdev_priv(dev);
1590 unsigned int timeout;
1591 unsigned int temp;
1592 unsigned int intcfg;
1593 int retval;
1594 int irq_flags;
1595
1596 pm_runtime_get_sync(dev->dev.parent);
1597
1598 /* find and start the given phy */
1599 if (!dev->phydev) {
1600 retval = smsc911x_mii_probe(dev);
1601 if (retval < 0) {
1602 SMSC_WARN(pdata, probe, "Error starting phy");
1603 goto out;
1604 }
1605 }
1606
1607 /* Reset the LAN911x */
1608 retval = smsc911x_soft_reset(pdata);
1609 if (retval) {
1610 SMSC_WARN(pdata, hw, "soft reset failed");
1611 goto mii_free_out;
1612 }
1613
1614 smsc911x_reg_write(pdata, HW_CFG, 0x00050000);
1615 smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740);
1616
1617 /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */
1618 spin_lock_irq(&pdata->mac_lock);
1619 smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q);
1620 spin_unlock_irq(&pdata->mac_lock);
1621
1622 /* Make sure EEPROM has finished loading before setting GPIO_CFG */
1623 timeout = 50;
1624 while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) &&
1625 --timeout) {
1626 udelay(10);
1627 }
1628
1629 if (unlikely(timeout == 0))
1630 SMSC_WARN(pdata, ifup,
1631 "Timed out waiting for EEPROM busy bit to clear");
1632
1633 smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
1634
1635 /* The soft reset above cleared the device's MAC address,
1636 * restore it from local copy (set in probe) */
1637 spin_lock_irq(&pdata->mac_lock);
1638 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1639 spin_unlock_irq(&pdata->mac_lock);
1640
1641 /* Initialise irqs, but leave all sources disabled */
1642 smsc911x_disable_irq_chip(dev);
1643
1644 /* Set interrupt deassertion to 100uS */
1645 intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
1646
1647 if (pdata->config.irq_polarity) {
1648 SMSC_TRACE(pdata, ifup, "irq polarity: active high");
1649 intcfg |= INT_CFG_IRQ_POL_;
1650 } else {
1651 SMSC_TRACE(pdata, ifup, "irq polarity: active low");
1652 }
1653
1654 if (pdata->config.irq_type) {
1655 SMSC_TRACE(pdata, ifup, "irq type: push-pull");
1656 intcfg |= INT_CFG_IRQ_TYPE_;
1657 } else {
1658 SMSC_TRACE(pdata, ifup, "irq type: open drain");
1659 }
1660
1661 smsc911x_reg_write(pdata, INT_CFG, intcfg);
1662
1663 SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq);
1664 pdata->software_irq_signal = 0;
1665 smp_wmb();
1666
1667 irq_flags = irq_get_trigger_type(dev->irq);
1668 retval = request_irq(dev->irq, smsc911x_irqhandler,
1669 irq_flags | IRQF_SHARED, dev->name, dev);
1670 if (retval) {
1671 SMSC_WARN(pdata, probe,
1672 "Unable to claim requested irq: %d", dev->irq);
1673 goto mii_free_out;
1674 }
1675
1676 temp = smsc911x_reg_read(pdata, INT_EN);
1677 temp |= INT_EN_SW_INT_EN_;
1678 smsc911x_reg_write(pdata, INT_EN, temp);
1679
1680 timeout = 1000;
1681 while (timeout--) {
1682 if (pdata->software_irq_signal)
1683 break;
1684 msleep(1);
1685 }
1686
1687 if (!pdata->software_irq_signal) {
1688 netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n",
1689 dev->irq);
1690 retval = -ENODEV;
1691 goto irq_stop_out;
1692 }
1693 SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",
1694 dev->irq);
1695
1696 netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
1697 (unsigned long)pdata->ioaddr, dev->irq);
1698
1699 /* Reset the last known duplex and carrier */
1700 pdata->last_duplex = -1;
1701 pdata->last_carrier = -1;
1702
1703 /* Bring the PHY up */
1704 phy_start(dev->phydev);
1705
1706 temp = smsc911x_reg_read(pdata, HW_CFG);
1707 /* Preserve TX FIFO size and external PHY configuration */
1708 temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF);
1709 temp |= HW_CFG_SF_;
1710 smsc911x_reg_write(pdata, HW_CFG, temp);
1711
1712 temp = smsc911x_reg_read(pdata, FIFO_INT);
1713 temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1714 temp &= ~(FIFO_INT_RX_STS_LEVEL_);
1715 smsc911x_reg_write(pdata, FIFO_INT, temp);
1716
1717 /* set RX Data offset to 2 bytes for alignment */
1718 smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8));
1719
1720 /* enable NAPI polling before enabling RX interrupts */
1721 napi_enable(&pdata->napi);
1722
1723 temp = smsc911x_reg_read(pdata, INT_EN);
1724 temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_);
1725 smsc911x_reg_write(pdata, INT_EN, temp);
1726
1727 spin_lock_irq(&pdata->mac_lock);
1728 temp = smsc911x_mac_read(pdata, MAC_CR);
1729 temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
1730 smsc911x_mac_write(pdata, MAC_CR, temp);
1731 spin_unlock_irq(&pdata->mac_lock);
1732
1733 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
1734
1735 netif_start_queue(dev);
1736 return 0;
1737
1738irq_stop_out:
1739 free_irq(dev->irq, dev);
1740mii_free_out:
1741 phy_disconnect(dev->phydev);
1742 dev->phydev = NULL;
1743out:
1744 pm_runtime_put(dev->dev.parent);
1745 return retval;
1746}
1747
1748/* Entry point for stopping the interface */
1749static int smsc911x_stop(struct net_device *dev)
1750{
1751 struct smsc911x_data *pdata = netdev_priv(dev);
1752 unsigned int temp;
1753
1754 /* Disable all device interrupts */
1755 temp = smsc911x_reg_read(pdata, INT_CFG);
1756 temp &= ~INT_CFG_IRQ_EN_;
1757 smsc911x_reg_write(pdata, INT_CFG, temp);
1758
1759 /* Stop Tx and Rx polling */
1760 netif_stop_queue(dev);
1761 napi_disable(&pdata->napi);
1762
1763 /* At this point all Rx and Tx activity is stopped */
1764 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1765 smsc911x_tx_update_txcounters(dev);
1766
1767 free_irq(dev->irq, dev);
1768
1769 /* Bring the PHY down */
1770 if (dev->phydev) {
1771 phy_stop(dev->phydev);
1772 phy_disconnect(dev->phydev);
1773 dev->phydev = NULL;
1774 }
1775 netif_carrier_off(dev);
1776 pm_runtime_put(dev->dev.parent);
1777
1778 SMSC_TRACE(pdata, ifdown, "Interface stopped");
1779 return 0;
1780}
1781
1782/* Entry point for transmitting a packet */
1783static netdev_tx_t
1784smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
1785{
1786 struct smsc911x_data *pdata = netdev_priv(dev);
1787 unsigned int freespace;
1788 unsigned int tx_cmd_a;
1789 unsigned int tx_cmd_b;
1790 unsigned int temp;
1791 u32 wrsz;
1792 ulong bufp;
1793
1794 freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_;
1795
1796 if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD))
1797 SMSC_WARN(pdata, tx_err,
1798 "Tx data fifo low, space available: %d", freespace);
1799
1800 /* Word alignment adjustment */
1801 tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16;
1802 tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
1803 tx_cmd_a |= (unsigned int)skb->len;
1804
1805 tx_cmd_b = ((unsigned int)skb->len) << 16;
1806 tx_cmd_b |= (unsigned int)skb->len;
1807
1808 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a);
1809 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b);
1810
1811 bufp = (ulong)skb->data & (~0x3);
1812 wrsz = (u32)skb->len + 3;
1813 wrsz += (u32)((ulong)skb->data & 0x3);
1814 wrsz >>= 2;
1815
1816 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
1817 freespace -= (skb->len + 32);
1818 skb_tx_timestamp(skb);
1819 dev_consume_skb_any(skb);
1820
1821 if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30))
1822 smsc911x_tx_update_txcounters(dev);
1823
1824 if (freespace < TX_FIFO_LOW_THRESHOLD) {
1825 netif_stop_queue(dev);
1826 temp = smsc911x_reg_read(pdata, FIFO_INT);
1827 temp &= 0x00FFFFFF;
1828 temp |= 0x32000000;
1829 smsc911x_reg_write(pdata, FIFO_INT, temp);
1830 }
1831
1832 return NETDEV_TX_OK;
1833}
1834
1835/* Entry point for getting status counters */
1836static struct net_device_stats *smsc911x_get_stats(struct net_device *dev)
1837{
1838 struct smsc911x_data *pdata = netdev_priv(dev);
1839 smsc911x_tx_update_txcounters(dev);
1840 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1841 return &dev->stats;
1842}
1843
1844/* Entry point for setting addressing modes */
1845static void smsc911x_set_multicast_list(struct net_device *dev)
1846{
1847 struct smsc911x_data *pdata = netdev_priv(dev);
1848 unsigned long flags;
1849
1850 if (dev->flags & IFF_PROMISC) {
1851 /* Enabling promiscuous mode */
1852 pdata->set_bits_mask = MAC_CR_PRMS_;
1853 pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1854 pdata->hashhi = 0;
1855 pdata->hashlo = 0;
1856 } else if (dev->flags & IFF_ALLMULTI) {
1857 /* Enabling all multicast mode */
1858 pdata->set_bits_mask = MAC_CR_MCPAS_;
1859 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_);
1860 pdata->hashhi = 0;
1861 pdata->hashlo = 0;
1862 } else if (!netdev_mc_empty(dev)) {
1863 /* Enabling specific multicast addresses */
1864 unsigned int hash_high = 0;
1865 unsigned int hash_low = 0;
1866 struct netdev_hw_addr *ha;
1867
1868 pdata->set_bits_mask = MAC_CR_HPFILT_;
1869 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1870
1871 netdev_for_each_mc_addr(ha, dev) {
1872 unsigned int bitnum = smsc911x_hash(ha->addr);
1873 unsigned int mask = 0x01 << (bitnum & 0x1F);
1874
1875 if (bitnum & 0x20)
1876 hash_high |= mask;
1877 else
1878 hash_low |= mask;
1879 }
1880
1881 pdata->hashhi = hash_high;
1882 pdata->hashlo = hash_low;
1883 } else {
1884 /* Enabling local MAC address only */
1885 pdata->set_bits_mask = 0;
1886 pdata->clear_bits_mask =
1887 (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1888 pdata->hashhi = 0;
1889 pdata->hashlo = 0;
1890 }
1891
1892 spin_lock_irqsave(&pdata->mac_lock, flags);
1893
1894 if (pdata->generation <= 1) {
1895 /* Older hardware revision - cannot change these flags while
1896 * receiving data */
1897 if (!pdata->multicast_update_pending) {
1898 unsigned int temp;
1899 SMSC_TRACE(pdata, hw, "scheduling mcast update");
1900 pdata->multicast_update_pending = 1;
1901
1902 /* Request the hardware to stop, then perform the
1903 * update when we get an RX_STOP interrupt */
1904 temp = smsc911x_mac_read(pdata, MAC_CR);
1905 temp &= ~(MAC_CR_RXEN_);
1906 smsc911x_mac_write(pdata, MAC_CR, temp);
1907 } else {
1908 /* There is another update pending, this should now
1909 * use the newer values */
1910 }
1911 } else {
1912 /* Newer hardware revision - can write immediately */
1913 smsc911x_rx_multicast_update(pdata);
1914 }
1915
1916 spin_unlock_irqrestore(&pdata->mac_lock, flags);
1917}
1918
1919#ifdef CONFIG_NET_POLL_CONTROLLER
1920static void smsc911x_poll_controller(struct net_device *dev)
1921{
1922 disable_irq(dev->irq);
1923 smsc911x_irqhandler(0, dev);
1924 enable_irq(dev->irq);
1925}
1926#endif /* CONFIG_NET_POLL_CONTROLLER */
1927
1928static int smsc911x_set_mac_address(struct net_device *dev, void *p)
1929{
1930 struct smsc911x_data *pdata = netdev_priv(dev);
1931 struct sockaddr *addr = p;
1932
1933 /* On older hardware revisions we cannot change the mac address
1934 * registers while receiving data. Newer devices can safely change
1935 * this at any time. */
1936 if (pdata->generation <= 1 && netif_running(dev))
1937 return -EBUSY;
1938
1939 if (!is_valid_ether_addr(addr->sa_data))
1940 return -EADDRNOTAVAIL;
1941
1942 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
1943
1944 spin_lock_irq(&pdata->mac_lock);
1945 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1946 spin_unlock_irq(&pdata->mac_lock);
1947
1948 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
1949
1950 return 0;
1951}
1952
1953static void smsc911x_ethtool_getdrvinfo(struct net_device *dev,
1954 struct ethtool_drvinfo *info)
1955{
1956 strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver));
1957 strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version));
1958 strlcpy(info->bus_info, dev_name(dev->dev.parent),
1959 sizeof(info->bus_info));
1960}
1961
1962static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev)
1963{
1964 struct smsc911x_data *pdata = netdev_priv(dev);
1965 return pdata->msg_enable;
1966}
1967
1968static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
1969{
1970 struct smsc911x_data *pdata = netdev_priv(dev);
1971 pdata->msg_enable = level;
1972}
1973
1974static int smsc911x_ethtool_getregslen(struct net_device *dev)
1975{
1976 return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) *
1977 sizeof(u32);
1978}
1979
1980static void
1981smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs,
1982 void *buf)
1983{
1984 struct smsc911x_data *pdata = netdev_priv(dev);
1985 struct phy_device *phy_dev = dev->phydev;
1986 unsigned long flags;
1987 unsigned int i;
1988 unsigned int j = 0;
1989 u32 *data = buf;
1990
1991 regs->version = pdata->idrev;
1992 for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32)))
1993 data[j++] = smsc911x_reg_read(pdata, i);
1994
1995 for (i = MAC_CR; i <= WUCSR; i++) {
1996 spin_lock_irqsave(&pdata->mac_lock, flags);
1997 data[j++] = smsc911x_mac_read(pdata, i);
1998 spin_unlock_irqrestore(&pdata->mac_lock, flags);
1999 }
2000
2001 for (i = 0; i <= 31; i++)
2002 data[j++] = smsc911x_mii_read(phy_dev->mdio.bus,
2003 phy_dev->mdio.addr, i);
2004}
2005
2006static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata)
2007{
2008 unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG);
2009 temp &= ~GPIO_CFG_EEPR_EN_;
2010 smsc911x_reg_write(pdata, GPIO_CFG, temp);
2011 msleep(1);
2012}
2013
2014static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
2015{
2016 int timeout = 100;
2017 u32 e2cmd;
2018
2019 SMSC_TRACE(pdata, drv, "op 0x%08x", op);
2020 if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
2021 SMSC_WARN(pdata, drv, "Busy at start");
2022 return -EBUSY;
2023 }
2024
2025 e2cmd = op | E2P_CMD_EPC_BUSY_;
2026 smsc911x_reg_write(pdata, E2P_CMD, e2cmd);
2027
2028 do {
2029 msleep(1);
2030 e2cmd = smsc911x_reg_read(pdata, E2P_CMD);
2031 } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
2032
2033 if (!timeout) {
2034 SMSC_TRACE(pdata, drv, "TIMED OUT");
2035 return -EAGAIN;
2036 }
2037
2038 if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
2039 SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation");
2040 return -EINVAL;
2041 }
2042
2043 return 0;
2044}
2045
2046static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata,
2047 u8 address, u8 *data)
2048{
2049 u32 op = E2P_CMD_EPC_CMD_READ_ | address;
2050 int ret;
2051
2052 SMSC_TRACE(pdata, drv, "address 0x%x", address);
2053 ret = smsc911x_eeprom_send_cmd(pdata, op);
2054
2055 if (!ret)
2056 data[address] = smsc911x_reg_read(pdata, E2P_DATA);
2057
2058 return ret;
2059}
2060
2061static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata,
2062 u8 address, u8 data)
2063{
2064 u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
2065 int ret;
2066
2067 SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data);
2068 ret = smsc911x_eeprom_send_cmd(pdata, op);
2069
2070 if (!ret) {
2071 op = E2P_CMD_EPC_CMD_WRITE_ | address;
2072 smsc911x_reg_write(pdata, E2P_DATA, (u32)data);
2073
2074 /* Workaround for hardware read-after-write restriction */
2075 smsc911x_reg_read(pdata, BYTE_TEST);
2076
2077 ret = smsc911x_eeprom_send_cmd(pdata, op);
2078 }
2079
2080 return ret;
2081}
2082
2083static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev)
2084{
2085 return SMSC911X_EEPROM_SIZE;
2086}
2087
2088static int smsc911x_ethtool_get_eeprom(struct net_device *dev,
2089 struct ethtool_eeprom *eeprom, u8 *data)
2090{
2091 struct smsc911x_data *pdata = netdev_priv(dev);
2092 u8 eeprom_data[SMSC911X_EEPROM_SIZE];
2093 int len;
2094 int i;
2095
2096 smsc911x_eeprom_enable_access(pdata);
2097
2098 len = min(eeprom->len, SMSC911X_EEPROM_SIZE);
2099 for (i = 0; i < len; i++) {
2100 int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data);
2101 if (ret < 0) {
2102 eeprom->len = 0;
2103 return ret;
2104 }
2105 }
2106
2107 memcpy(data, &eeprom_data[eeprom->offset], len);
2108 eeprom->len = len;
2109 return 0;
2110}
2111
2112static int smsc911x_ethtool_set_eeprom(struct net_device *dev,
2113 struct ethtool_eeprom *eeprom, u8 *data)
2114{
2115 int ret;
2116 struct smsc911x_data *pdata = netdev_priv(dev);
2117
2118 smsc911x_eeprom_enable_access(pdata);
2119 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_);
2120 ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data);
2121 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_);
2122
2123 /* Single byte write, according to man page */
2124 eeprom->len = 1;
2125
2126 return ret;
2127}
2128
2129static const struct ethtool_ops smsc911x_ethtool_ops = {
2130 .get_link = ethtool_op_get_link,
2131 .get_drvinfo = smsc911x_ethtool_getdrvinfo,
2132 .nway_reset = phy_ethtool_nway_reset,
2133 .get_msglevel = smsc911x_ethtool_getmsglevel,
2134 .set_msglevel = smsc911x_ethtool_setmsglevel,
2135 .get_regs_len = smsc911x_ethtool_getregslen,
2136 .get_regs = smsc911x_ethtool_getregs,
2137 .get_eeprom_len = smsc911x_ethtool_get_eeprom_len,
2138 .get_eeprom = smsc911x_ethtool_get_eeprom,
2139 .set_eeprom = smsc911x_ethtool_set_eeprom,
2140 .get_ts_info = ethtool_op_get_ts_info,
2141 .get_link_ksettings = phy_ethtool_get_link_ksettings,
2142 .set_link_ksettings = phy_ethtool_set_link_ksettings,
2143};
2144
2145static const struct net_device_ops smsc911x_netdev_ops = {
2146 .ndo_open = smsc911x_open,
2147 .ndo_stop = smsc911x_stop,
2148 .ndo_start_xmit = smsc911x_hard_start_xmit,
2149 .ndo_get_stats = smsc911x_get_stats,
2150 .ndo_set_rx_mode = smsc911x_set_multicast_list,
2151 .ndo_do_ioctl = phy_do_ioctl_running,
2152 .ndo_validate_addr = eth_validate_addr,
2153 .ndo_set_mac_address = smsc911x_set_mac_address,
2154#ifdef CONFIG_NET_POLL_CONTROLLER
2155 .ndo_poll_controller = smsc911x_poll_controller,
2156#endif
2157};
2158
2159/* copies the current mac address from hardware to dev->dev_addr */
2160static void smsc911x_read_mac_address(struct net_device *dev)
2161{
2162 struct smsc911x_data *pdata = netdev_priv(dev);
2163 u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH);
2164 u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL);
2165
2166 dev->dev_addr[0] = (u8)(mac_low32);
2167 dev->dev_addr[1] = (u8)(mac_low32 >> 8);
2168 dev->dev_addr[2] = (u8)(mac_low32 >> 16);
2169 dev->dev_addr[3] = (u8)(mac_low32 >> 24);
2170 dev->dev_addr[4] = (u8)(mac_high16);
2171 dev->dev_addr[5] = (u8)(mac_high16 >> 8);
2172}
2173
2174/* Initializing private device structures, only called from probe */
2175static int smsc911x_init(struct net_device *dev)
2176{
2177 struct smsc911x_data *pdata = netdev_priv(dev);
2178 unsigned int byte_test, mask;
2179 unsigned int to = 100;
2180
2181 SMSC_TRACE(pdata, probe, "Driver Parameters:");
2182 SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
2183 (unsigned long)pdata->ioaddr);
2184 SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq);
2185 SMSC_TRACE(pdata, probe, "PHY will be autodetected.");
2186
2187 spin_lock_init(&pdata->dev_lock);
2188 spin_lock_init(&pdata->mac_lock);
2189
2190 if (pdata->ioaddr == NULL) {
2191 SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000");
2192 return -ENODEV;
2193 }
2194
2195 /*
2196 * poll the READY bit in PMT_CTRL. Any other access to the device is
2197 * forbidden while this bit isn't set. Try for 100ms
2198 *
2199 * Note that this test is done before the WORD_SWAP register is
2200 * programmed. So in some configurations the READY bit is at 16 before
2201 * WORD_SWAP is written to. This issue is worked around by waiting
2202 * until either bit 0 or bit 16 gets set in PMT_CTRL.
2203 *
2204 * SMSC has confirmed that checking bit 16 (marked as reserved in
2205 * the datasheet) is fine since these bits "will either never be set
2206 * or can only go high after READY does (so also indicate the device
2207 * is ready)".
2208 */
2209
2210 mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
2211 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
2212 udelay(1000);
2213
2214 if (to == 0) {
2215 netdev_err(dev, "Device not READY in 100ms aborting\n");
2216 return -ENODEV;
2217 }
2218
2219 /* Check byte ordering */
2220 byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2221 SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
2222 if (byte_test == 0x43218765) {
2223 SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, "
2224 "applying WORD_SWAP");
2225 smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff);
2226
2227 /* 1 dummy read of BYTE_TEST is needed after a write to
2228 * WORD_SWAP before its contents are valid */
2229 byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2230
2231 byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2232 }
2233
2234 if (byte_test != 0x87654321) {
2235 SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test);
2236 if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) {
2237 SMSC_WARN(pdata, probe,
2238 "top 16 bits equal to bottom 16 bits");
2239 SMSC_TRACE(pdata, probe,
2240 "This may mean the chip is set "
2241 "for 32 bit while the bus is reading 16 bit");
2242 }
2243 return -ENODEV;
2244 }
2245
2246 /* Default generation to zero (all workarounds apply) */
2247 pdata->generation = 0;
2248
2249 pdata->idrev = smsc911x_reg_read(pdata, ID_REV);
2250 switch (pdata->idrev & 0xFFFF0000) {
2251 case LAN9118:
2252 case LAN9117:
2253 case LAN9116:
2254 case LAN9115:
2255 case LAN89218:
2256 /* LAN911[5678] family */
2257 pdata->generation = pdata->idrev & 0x0000FFFF;
2258 break;
2259
2260 case LAN9218:
2261 case LAN9217:
2262 case LAN9216:
2263 case LAN9215:
2264 /* LAN921[5678] family */
2265 pdata->generation = 3;
2266 break;
2267
2268 case LAN9210:
2269 case LAN9211:
2270 case LAN9220:
2271 case LAN9221:
2272 case LAN9250:
2273 /* LAN9210/LAN9211/LAN9220/LAN9221/LAN9250 */
2274 pdata->generation = 4;
2275 break;
2276
2277 default:
2278 SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X",
2279 pdata->idrev);
2280 return -ENODEV;
2281 }
2282
2283 SMSC_TRACE(pdata, probe,
2284 "LAN911x identified, idrev: 0x%08X, generation: %d",
2285 pdata->idrev, pdata->generation);
2286
2287 if (pdata->generation == 0)
2288 SMSC_WARN(pdata, probe,
2289 "This driver is not intended for this chip revision");
2290
2291 /* workaround for platforms without an eeprom, where the mac address
2292 * is stored elsewhere and set by the bootloader. This saves the
2293 * mac address before resetting the device */
2294 if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) {
2295 spin_lock_irq(&pdata->mac_lock);
2296 smsc911x_read_mac_address(dev);
2297 spin_unlock_irq(&pdata->mac_lock);
2298 }
2299
2300 /* Reset the LAN911x */
2301 if (smsc911x_phy_reset(pdata) || smsc911x_soft_reset(pdata))
2302 return -ENODEV;
2303
2304 dev->flags |= IFF_MULTICAST;
2305 netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT);
2306 dev->netdev_ops = &smsc911x_netdev_ops;
2307 dev->ethtool_ops = &smsc911x_ethtool_ops;
2308
2309 return 0;
2310}
2311
2312static int smsc911x_drv_remove(struct platform_device *pdev)
2313{
2314 struct net_device *dev;
2315 struct smsc911x_data *pdata;
2316 struct resource *res;
2317
2318 dev = platform_get_drvdata(pdev);
2319 BUG_ON(!dev);
2320 pdata = netdev_priv(dev);
2321 BUG_ON(!pdata);
2322 BUG_ON(!pdata->ioaddr);
2323
2324 SMSC_TRACE(pdata, ifdown, "Stopping driver");
2325
2326 unregister_netdev(dev);
2327
2328 mdiobus_unregister(pdata->mii_bus);
2329 mdiobus_free(pdata->mii_bus);
2330
2331 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2332 "smsc911x-memory");
2333 if (!res)
2334 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2335
2336 release_mem_region(res->start, resource_size(res));
2337
2338 iounmap(pdata->ioaddr);
2339
2340 (void)smsc911x_disable_resources(pdev);
2341 smsc911x_free_resources(pdev);
2342
2343 free_netdev(dev);
2344
2345 pm_runtime_disable(&pdev->dev);
2346
2347 return 0;
2348}
2349
2350/* standard register acces */
2351static const struct smsc911x_ops standard_smsc911x_ops = {
2352 .reg_read = __smsc911x_reg_read,
2353 .reg_write = __smsc911x_reg_write,
2354 .rx_readfifo = smsc911x_rx_readfifo,
2355 .tx_writefifo = smsc911x_tx_writefifo,
2356};
2357
2358/* shifted register access */
2359static const struct smsc911x_ops shifted_smsc911x_ops = {
2360 .reg_read = __smsc911x_reg_read_shift,
2361 .reg_write = __smsc911x_reg_write_shift,
2362 .rx_readfifo = smsc911x_rx_readfifo_shift,
2363 .tx_writefifo = smsc911x_tx_writefifo_shift,
2364};
2365
2366static int smsc911x_probe_config(struct smsc911x_platform_config *config,
2367 struct device *dev)
2368{
2369 int phy_interface;
2370 u32 width = 0;
2371 int err;
2372
2373 phy_interface = device_get_phy_mode(dev);
2374 if (phy_interface < 0)
2375 phy_interface = PHY_INTERFACE_MODE_NA;
2376 config->phy_interface = phy_interface;
2377
2378 device_get_mac_address(dev, config->mac, ETH_ALEN);
2379
2380 err = device_property_read_u32(dev, "reg-io-width", &width);
2381 if (err == -ENXIO)
2382 return err;
2383 if (!err && width == 4)
2384 config->flags |= SMSC911X_USE_32BIT;
2385 else
2386 config->flags |= SMSC911X_USE_16BIT;
2387
2388 device_property_read_u32(dev, "reg-shift", &config->shift);
2389
2390 if (device_property_present(dev, "smsc,irq-active-high"))
2391 config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
2392
2393 if (device_property_present(dev, "smsc,irq-push-pull"))
2394 config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
2395
2396 if (device_property_present(dev, "smsc,force-internal-phy"))
2397 config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
2398
2399 if (device_property_present(dev, "smsc,force-external-phy"))
2400 config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
2401
2402 if (device_property_present(dev, "smsc,save-mac-address"))
2403 config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
2404
2405 return 0;
2406}
2407
2408static int smsc911x_drv_probe(struct platform_device *pdev)
2409{
2410 struct net_device *dev;
2411 struct smsc911x_data *pdata;
2412 struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev);
2413 struct resource *res;
2414 int res_size, irq;
2415 int retval;
2416
2417 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2418 "smsc911x-memory");
2419 if (!res)
2420 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2421 if (!res) {
2422 pr_warn("Could not allocate resource\n");
2423 retval = -ENODEV;
2424 goto out_0;
2425 }
2426 res_size = resource_size(res);
2427
2428 irq = platform_get_irq(pdev, 0);
2429 if (irq == -EPROBE_DEFER) {
2430 retval = -EPROBE_DEFER;
2431 goto out_0;
2432 } else if (irq <= 0) {
2433 pr_warn("Could not allocate irq resource\n");
2434 retval = -ENODEV;
2435 goto out_0;
2436 }
2437
2438 if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) {
2439 retval = -EBUSY;
2440 goto out_0;
2441 }
2442
2443 dev = alloc_etherdev(sizeof(struct smsc911x_data));
2444 if (!dev) {
2445 retval = -ENOMEM;
2446 goto out_release_io_1;
2447 }
2448
2449 SET_NETDEV_DEV(dev, &pdev->dev);
2450
2451 pdata = netdev_priv(dev);
2452 dev->irq = irq;
2453 pdata->ioaddr = ioremap(res->start, res_size);
2454 if (!pdata->ioaddr) {
2455 retval = -ENOMEM;
2456 goto out_ioremap_fail;
2457 }
2458
2459 pdata->dev = dev;
2460 pdata->msg_enable = ((1 << debug) - 1);
2461
2462 platform_set_drvdata(pdev, dev);
2463
2464 retval = smsc911x_request_resources(pdev);
2465 if (retval)
2466 goto out_request_resources_fail;
2467
2468 retval = smsc911x_enable_resources(pdev);
2469 if (retval)
2470 goto out_enable_resources_fail;
2471
2472 if (pdata->ioaddr == NULL) {
2473 SMSC_WARN(pdata, probe, "Error smsc911x base address invalid");
2474 retval = -ENOMEM;
2475 goto out_disable_resources;
2476 }
2477
2478 retval = smsc911x_probe_config(&pdata->config, &pdev->dev);
2479 if (retval && config) {
2480 /* copy config parameters across to pdata */
2481 memcpy(&pdata->config, config, sizeof(pdata->config));
2482 retval = 0;
2483 }
2484
2485 if (retval) {
2486 SMSC_WARN(pdata, probe, "Error smsc911x config not found");
2487 goto out_disable_resources;
2488 }
2489
2490 /* assume standard, non-shifted, access to HW registers */
2491 pdata->ops = &standard_smsc911x_ops;
2492 /* apply the right access if shifting is needed */
2493 if (pdata->config.shift)
2494 pdata->ops = &shifted_smsc911x_ops;
2495
2496 pm_runtime_enable(&pdev->dev);
2497 pm_runtime_get_sync(&pdev->dev);
2498
2499 retval = smsc911x_init(dev);
2500 if (retval < 0)
2501 goto out_init_fail;
2502
2503 netif_carrier_off(dev);
2504
2505 retval = smsc911x_mii_init(pdev, dev);
2506 if (retval) {
2507 SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
2508 goto out_init_fail;
2509 }
2510
2511 retval = register_netdev(dev);
2512 if (retval) {
2513 SMSC_WARN(pdata, probe, "Error %i registering device", retval);
2514 goto out_init_fail;
2515 } else {
2516 SMSC_TRACE(pdata, probe,
2517 "Network interface: \"%s\"", dev->name);
2518 }
2519
2520 spin_lock_irq(&pdata->mac_lock);
2521
2522 /* Check if mac address has been specified when bringing interface up */
2523 if (is_valid_ether_addr(dev->dev_addr)) {
2524 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2525 SMSC_TRACE(pdata, probe,
2526 "MAC Address is specified by configuration");
2527 } else if (is_valid_ether_addr(pdata->config.mac)) {
2528 memcpy(dev->dev_addr, pdata->config.mac, ETH_ALEN);
2529 SMSC_TRACE(pdata, probe,
2530 "MAC Address specified by platform data");
2531 } else {
2532 /* Try reading mac address from device. if EEPROM is present
2533 * it will already have been set */
2534 smsc_get_mac(dev);
2535
2536 if (is_valid_ether_addr(dev->dev_addr)) {
2537 /* eeprom values are valid so use them */
2538 SMSC_TRACE(pdata, probe,
2539 "Mac Address is read from LAN911x EEPROM");
2540 } else {
2541 /* eeprom values are invalid, generate random MAC */
2542 eth_hw_addr_random(dev);
2543 smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2544 SMSC_TRACE(pdata, probe,
2545 "MAC Address is set to eth_random_addr");
2546 }
2547 }
2548
2549 spin_unlock_irq(&pdata->mac_lock);
2550 pm_runtime_put(&pdev->dev);
2551
2552 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
2553
2554 return 0;
2555
2556out_init_fail:
2557 pm_runtime_put(&pdev->dev);
2558 pm_runtime_disable(&pdev->dev);
2559out_disable_resources:
2560 (void)smsc911x_disable_resources(pdev);
2561out_enable_resources_fail:
2562 smsc911x_free_resources(pdev);
2563out_request_resources_fail:
2564 iounmap(pdata->ioaddr);
2565out_ioremap_fail:
2566 free_netdev(dev);
2567out_release_io_1:
2568 release_mem_region(res->start, resource_size(res));
2569out_0:
2570 return retval;
2571}
2572
2573#ifdef CONFIG_PM
2574/* This implementation assumes the devices remains powered on its VDDVARIO
2575 * pins during suspend. */
2576
2577/* TODO: implement freeze/thaw callbacks for hibernation.*/
2578
2579static int smsc911x_suspend(struct device *dev)
2580{
2581 struct net_device *ndev = dev_get_drvdata(dev);
2582 struct smsc911x_data *pdata = netdev_priv(ndev);
2583
2584 if (netif_running(ndev)) {
2585 netif_stop_queue(ndev);
2586 netif_device_detach(ndev);
2587 }
2588
2589 /* enable wake on LAN, energy detection and the external PME
2590 * signal. */
2591 smsc911x_reg_write(pdata, PMT_CTRL,
2592 PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ |
2593 PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_);
2594
2595 pm_runtime_disable(dev);
2596 pm_runtime_set_suspended(dev);
2597
2598 return 0;
2599}
2600
2601static int smsc911x_resume(struct device *dev)
2602{
2603 struct net_device *ndev = dev_get_drvdata(dev);
2604 struct smsc911x_data *pdata = netdev_priv(ndev);
2605 unsigned int to = 100;
2606
2607 pm_runtime_enable(dev);
2608 pm_runtime_resume(dev);
2609
2610 /* Note 3.11 from the datasheet:
2611 * "When the LAN9220 is in a power saving state, a write of any
2612 * data to the BYTE_TEST register will wake-up the device."
2613 */
2614 smsc911x_reg_write(pdata, BYTE_TEST, 0);
2615
2616 /* poll the READY bit in PMT_CTRL. Any other access to the device is
2617 * forbidden while this bit isn't set. Try for 100ms and return -EIO
2618 * if it failed. */
2619 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
2620 udelay(1000);
2621
2622 if (to == 0)
2623 return -EIO;
2624
2625 if (netif_running(ndev)) {
2626 netif_device_attach(ndev);
2627 netif_start_queue(ndev);
2628 }
2629
2630 return 0;
2631}
2632
2633static const struct dev_pm_ops smsc911x_pm_ops = {
2634 .suspend = smsc911x_suspend,
2635 .resume = smsc911x_resume,
2636};
2637
2638#define SMSC911X_PM_OPS (&smsc911x_pm_ops)
2639
2640#else
2641#define SMSC911X_PM_OPS NULL
2642#endif
2643
2644#ifdef CONFIG_OF
2645static const struct of_device_id smsc911x_dt_ids[] = {
2646 { .compatible = "smsc,lan9115", },
2647 { /* sentinel */ }
2648};
2649MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
2650#endif
2651
2652#ifdef CONFIG_ACPI
2653static const struct acpi_device_id smsc911x_acpi_match[] = {
2654 { "ARMH9118", 0 },
2655 { }
2656};
2657MODULE_DEVICE_TABLE(acpi, smsc911x_acpi_match);
2658#endif
2659
2660static struct platform_driver smsc911x_driver = {
2661 .probe = smsc911x_drv_probe,
2662 .remove = smsc911x_drv_remove,
2663 .driver = {
2664 .name = SMSC_CHIPNAME,
2665 .pm = SMSC911X_PM_OPS,
2666 .of_match_table = of_match_ptr(smsc911x_dt_ids),
2667 .acpi_match_table = ACPI_PTR(smsc911x_acpi_match),
2668 },
2669};
2670
2671/* Entry point for loading the module */
2672static int __init smsc911x_init_module(void)
2673{
2674 SMSC_INITIALIZE();
2675 return platform_driver_register(&smsc911x_driver);
2676}
2677
2678/* entry point for unloading the module */
2679static void __exit smsc911x_cleanup_module(void)
2680{
2681 platform_driver_unregister(&smsc911x_driver);
2682}
2683
2684module_init(smsc911x_init_module);
2685module_exit(smsc911x_cleanup_module);