Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * pwm-fan.c - Hwmon driver for fans connected to PWM lines.
4 *
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 *
7 * Author: Kamil Debski <k.debski@samsung.com>
8 */
9
10#include <linux/hwmon.h>
11#include <linux/interrupt.h>
12#include <linux/module.h>
13#include <linux/mutex.h>
14#include <linux/of.h>
15#include <linux/platform_device.h>
16#include <linux/pwm.h>
17#include <linux/regulator/consumer.h>
18#include <linux/sysfs.h>
19#include <linux/thermal.h>
20#include <linux/timer.h>
21
22#define MAX_PWM 255
23
24struct pwm_fan_tach {
25 int irq;
26 atomic_t pulses;
27 unsigned int rpm;
28 u8 pulses_per_revolution;
29};
30
31enum pwm_fan_enable_mode {
32 pwm_off_reg_off,
33 pwm_disable_reg_enable,
34 pwm_enable_reg_enable,
35 pwm_disable_reg_disable,
36};
37
38struct pwm_fan_ctx {
39 struct device *dev;
40
41 struct mutex lock;
42 struct pwm_device *pwm;
43 struct pwm_state pwm_state;
44 struct regulator *reg_en;
45 enum pwm_fan_enable_mode enable_mode;
46 bool regulator_enabled;
47 bool enabled;
48
49 int tach_count;
50 struct pwm_fan_tach *tachs;
51 ktime_t sample_start;
52 struct timer_list rpm_timer;
53
54 unsigned int pwm_value;
55 unsigned int pwm_fan_state;
56 unsigned int pwm_fan_max_state;
57 unsigned int *pwm_fan_cooling_levels;
58 struct thermal_cooling_device *cdev;
59
60 struct hwmon_chip_info info;
61 struct hwmon_channel_info fan_channel;
62};
63
64/* This handler assumes self resetting edge triggered interrupt. */
65static irqreturn_t pulse_handler(int irq, void *dev_id)
66{
67 struct pwm_fan_tach *tach = dev_id;
68
69 atomic_inc(&tach->pulses);
70
71 return IRQ_HANDLED;
72}
73
74static void sample_timer(struct timer_list *t)
75{
76 struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer);
77 unsigned int delta = ktime_ms_delta(ktime_get(), ctx->sample_start);
78 int i;
79
80 if (delta) {
81 for (i = 0; i < ctx->tach_count; i++) {
82 struct pwm_fan_tach *tach = &ctx->tachs[i];
83 int pulses;
84
85 pulses = atomic_read(&tach->pulses);
86 atomic_sub(pulses, &tach->pulses);
87 tach->rpm = (unsigned int)(pulses * 1000 * 60) /
88 (tach->pulses_per_revolution * delta);
89 }
90
91 ctx->sample_start = ktime_get();
92 }
93
94 mod_timer(&ctx->rpm_timer, jiffies + HZ);
95}
96
97static void pwm_fan_enable_mode_2_state(int enable_mode,
98 struct pwm_state *state,
99 bool *enable_regulator)
100{
101 switch (enable_mode) {
102 case pwm_disable_reg_enable:
103 /* disable pwm, keep regulator enabled */
104 state->enabled = false;
105 *enable_regulator = true;
106 break;
107 case pwm_enable_reg_enable:
108 /* keep pwm and regulator enabled */
109 state->enabled = true;
110 *enable_regulator = true;
111 break;
112 case pwm_off_reg_off:
113 case pwm_disable_reg_disable:
114 /* disable pwm and regulator */
115 state->enabled = false;
116 *enable_regulator = false;
117 }
118}
119
120static int pwm_fan_switch_power(struct pwm_fan_ctx *ctx, bool on)
121{
122 int ret = 0;
123
124 if (!ctx->reg_en)
125 return ret;
126
127 if (!ctx->regulator_enabled && on) {
128 ret = regulator_enable(ctx->reg_en);
129 if (ret == 0)
130 ctx->regulator_enabled = true;
131 } else if (ctx->regulator_enabled && !on) {
132 ret = regulator_disable(ctx->reg_en);
133 if (ret == 0)
134 ctx->regulator_enabled = false;
135 }
136 return ret;
137}
138
139static int pwm_fan_power_on(struct pwm_fan_ctx *ctx)
140{
141 struct pwm_state *state = &ctx->pwm_state;
142 int ret;
143
144 if (ctx->enabled)
145 return 0;
146
147 ret = pwm_fan_switch_power(ctx, true);
148 if (ret < 0) {
149 dev_err(ctx->dev, "failed to enable power supply\n");
150 return ret;
151 }
152
153 state->enabled = true;
154 ret = pwm_apply_might_sleep(ctx->pwm, state);
155 if (ret) {
156 dev_err(ctx->dev, "failed to enable PWM\n");
157 goto disable_regulator;
158 }
159
160 ctx->enabled = true;
161
162 return 0;
163
164disable_regulator:
165 pwm_fan_switch_power(ctx, false);
166 return ret;
167}
168
169static int pwm_fan_power_off(struct pwm_fan_ctx *ctx)
170{
171 struct pwm_state *state = &ctx->pwm_state;
172 bool enable_regulator = false;
173 int ret;
174
175 if (!ctx->enabled)
176 return 0;
177
178 pwm_fan_enable_mode_2_state(ctx->enable_mode,
179 state,
180 &enable_regulator);
181
182 state->enabled = false;
183 state->duty_cycle = 0;
184 ret = pwm_apply_might_sleep(ctx->pwm, state);
185 if (ret) {
186 dev_err(ctx->dev, "failed to disable PWM\n");
187 return ret;
188 }
189
190 pwm_fan_switch_power(ctx, enable_regulator);
191
192 ctx->enabled = false;
193
194 return 0;
195}
196
197static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
198{
199 struct pwm_state *state = &ctx->pwm_state;
200 unsigned long period;
201 int ret = 0;
202
203 if (pwm > 0) {
204 if (ctx->enable_mode == pwm_off_reg_off)
205 /* pwm-fan hard disabled */
206 return 0;
207
208 period = state->period;
209 state->duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
210 ret = pwm_apply_might_sleep(ctx->pwm, state);
211 if (ret)
212 return ret;
213 ret = pwm_fan_power_on(ctx);
214 } else {
215 ret = pwm_fan_power_off(ctx);
216 }
217 if (!ret)
218 ctx->pwm_value = pwm;
219
220 return ret;
221}
222
223static int set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
224{
225 int ret;
226
227 mutex_lock(&ctx->lock);
228 ret = __set_pwm(ctx, pwm);
229 mutex_unlock(&ctx->lock);
230
231 return ret;
232}
233
234static void pwm_fan_update_state(struct pwm_fan_ctx *ctx, unsigned long pwm)
235{
236 int i;
237
238 for (i = 0; i < ctx->pwm_fan_max_state; ++i)
239 if (pwm < ctx->pwm_fan_cooling_levels[i + 1])
240 break;
241
242 ctx->pwm_fan_state = i;
243}
244
245static int pwm_fan_update_enable(struct pwm_fan_ctx *ctx, long val)
246{
247 int ret = 0;
248 int old_val;
249
250 mutex_lock(&ctx->lock);
251
252 if (ctx->enable_mode == val)
253 goto out;
254
255 old_val = ctx->enable_mode;
256 ctx->enable_mode = val;
257
258 if (val == 0) {
259 /* Disable pwm-fan unconditionally */
260 if (ctx->enabled)
261 ret = __set_pwm(ctx, 0);
262 else
263 ret = pwm_fan_switch_power(ctx, false);
264 if (ret)
265 ctx->enable_mode = old_val;
266 pwm_fan_update_state(ctx, 0);
267 } else {
268 /*
269 * Change PWM and/or regulator state if currently disabled
270 * Nothing to do if currently enabled
271 */
272 if (!ctx->enabled) {
273 struct pwm_state *state = &ctx->pwm_state;
274 bool enable_regulator = false;
275
276 state->duty_cycle = 0;
277 pwm_fan_enable_mode_2_state(val,
278 state,
279 &enable_regulator);
280
281 pwm_apply_might_sleep(ctx->pwm, state);
282 pwm_fan_switch_power(ctx, enable_regulator);
283 pwm_fan_update_state(ctx, 0);
284 }
285 }
286out:
287 mutex_unlock(&ctx->lock);
288
289 return ret;
290}
291
292static int pwm_fan_write(struct device *dev, enum hwmon_sensor_types type,
293 u32 attr, int channel, long val)
294{
295 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
296 int ret;
297
298 switch (attr) {
299 case hwmon_pwm_input:
300 if (val < 0 || val > MAX_PWM)
301 return -EINVAL;
302 ret = set_pwm(ctx, val);
303 if (ret)
304 return ret;
305 pwm_fan_update_state(ctx, val);
306 break;
307 case hwmon_pwm_enable:
308 if (val < 0 || val > 3)
309 ret = -EINVAL;
310 else
311 ret = pwm_fan_update_enable(ctx, val);
312
313 return ret;
314 default:
315 return -EOPNOTSUPP;
316 }
317
318 return 0;
319}
320
321static int pwm_fan_read(struct device *dev, enum hwmon_sensor_types type,
322 u32 attr, int channel, long *val)
323{
324 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
325
326 switch (type) {
327 case hwmon_pwm:
328 switch (attr) {
329 case hwmon_pwm_input:
330 *val = ctx->pwm_value;
331 return 0;
332 case hwmon_pwm_enable:
333 *val = ctx->enable_mode;
334 return 0;
335 }
336 return -EOPNOTSUPP;
337 case hwmon_fan:
338 *val = ctx->tachs[channel].rpm;
339 return 0;
340
341 default:
342 return -ENOTSUPP;
343 }
344}
345
346static umode_t pwm_fan_is_visible(const void *data,
347 enum hwmon_sensor_types type,
348 u32 attr, int channel)
349{
350 switch (type) {
351 case hwmon_pwm:
352 return 0644;
353
354 case hwmon_fan:
355 return 0444;
356
357 default:
358 return 0;
359 }
360}
361
362static const struct hwmon_ops pwm_fan_hwmon_ops = {
363 .is_visible = pwm_fan_is_visible,
364 .read = pwm_fan_read,
365 .write = pwm_fan_write,
366};
367
368/* thermal cooling device callbacks */
369static int pwm_fan_get_max_state(struct thermal_cooling_device *cdev,
370 unsigned long *state)
371{
372 struct pwm_fan_ctx *ctx = cdev->devdata;
373
374 if (!ctx)
375 return -EINVAL;
376
377 *state = ctx->pwm_fan_max_state;
378
379 return 0;
380}
381
382static int pwm_fan_get_cur_state(struct thermal_cooling_device *cdev,
383 unsigned long *state)
384{
385 struct pwm_fan_ctx *ctx = cdev->devdata;
386
387 if (!ctx)
388 return -EINVAL;
389
390 *state = ctx->pwm_fan_state;
391
392 return 0;
393}
394
395static int
396pwm_fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
397{
398 struct pwm_fan_ctx *ctx = cdev->devdata;
399 int ret;
400
401 if (!ctx || (state > ctx->pwm_fan_max_state))
402 return -EINVAL;
403
404 if (state == ctx->pwm_fan_state)
405 return 0;
406
407 ret = set_pwm(ctx, ctx->pwm_fan_cooling_levels[state]);
408 if (ret) {
409 dev_err(&cdev->device, "Cannot set pwm!\n");
410 return ret;
411 }
412
413 ctx->pwm_fan_state = state;
414
415 return ret;
416}
417
418static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = {
419 .get_max_state = pwm_fan_get_max_state,
420 .get_cur_state = pwm_fan_get_cur_state,
421 .set_cur_state = pwm_fan_set_cur_state,
422};
423
424static int pwm_fan_of_get_cooling_data(struct device *dev,
425 struct pwm_fan_ctx *ctx)
426{
427 struct device_node *np = dev->of_node;
428 int num, i, ret;
429
430 if (!of_property_present(np, "cooling-levels"))
431 return 0;
432
433 ret = of_property_count_u32_elems(np, "cooling-levels");
434 if (ret <= 0) {
435 dev_err(dev, "Wrong data!\n");
436 return ret ? : -EINVAL;
437 }
438
439 num = ret;
440 ctx->pwm_fan_cooling_levels = devm_kcalloc(dev, num, sizeof(u32),
441 GFP_KERNEL);
442 if (!ctx->pwm_fan_cooling_levels)
443 return -ENOMEM;
444
445 ret = of_property_read_u32_array(np, "cooling-levels",
446 ctx->pwm_fan_cooling_levels, num);
447 if (ret) {
448 dev_err(dev, "Property 'cooling-levels' cannot be read!\n");
449 return ret;
450 }
451
452 for (i = 0; i < num; i++) {
453 if (ctx->pwm_fan_cooling_levels[i] > MAX_PWM) {
454 dev_err(dev, "PWM fan state[%d]:%d > %d\n", i,
455 ctx->pwm_fan_cooling_levels[i], MAX_PWM);
456 return -EINVAL;
457 }
458 }
459
460 ctx->pwm_fan_max_state = num - 1;
461
462 return 0;
463}
464
465static void pwm_fan_cleanup(void *__ctx)
466{
467 struct pwm_fan_ctx *ctx = __ctx;
468
469 del_timer_sync(&ctx->rpm_timer);
470 /* Switch off everything */
471 ctx->enable_mode = pwm_disable_reg_disable;
472 pwm_fan_power_off(ctx);
473}
474
475static int pwm_fan_probe(struct platform_device *pdev)
476{
477 struct thermal_cooling_device *cdev;
478 struct device *dev = &pdev->dev;
479 struct pwm_fan_ctx *ctx;
480 struct device *hwmon;
481 int ret;
482 const struct hwmon_channel_info **channels;
483 u32 *fan_channel_config;
484 int channel_count = 1; /* We always have a PWM channel. */
485 int i;
486
487 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
488 if (!ctx)
489 return -ENOMEM;
490
491 mutex_init(&ctx->lock);
492
493 ctx->dev = &pdev->dev;
494 ctx->pwm = devm_pwm_get(dev, NULL);
495 if (IS_ERR(ctx->pwm))
496 return dev_err_probe(dev, PTR_ERR(ctx->pwm), "Could not get PWM\n");
497
498 platform_set_drvdata(pdev, ctx);
499
500 ctx->reg_en = devm_regulator_get_optional(dev, "fan");
501 if (IS_ERR(ctx->reg_en)) {
502 if (PTR_ERR(ctx->reg_en) != -ENODEV)
503 return PTR_ERR(ctx->reg_en);
504
505 ctx->reg_en = NULL;
506 }
507
508 pwm_init_state(ctx->pwm, &ctx->pwm_state);
509
510 /*
511 * PWM fans are controlled solely by the duty cycle of the PWM signal,
512 * they do not care about the exact timing. Thus set usage_power to true
513 * to allow less flexible hardware to work as a PWM source for fan
514 * control.
515 */
516 ctx->pwm_state.usage_power = true;
517
518 /*
519 * set_pwm assumes that MAX_PWM * (period - 1) fits into an unsigned
520 * long. Check this here to prevent the fan running at a too low
521 * frequency.
522 */
523 if (ctx->pwm_state.period > ULONG_MAX / MAX_PWM + 1) {
524 dev_err(dev, "Configured period too big\n");
525 return -EINVAL;
526 }
527
528 ctx->enable_mode = pwm_disable_reg_enable;
529
530 /*
531 * Set duty cycle to maximum allowed and enable PWM output as well as
532 * the regulator. In case of error nothing is changed
533 */
534 ret = set_pwm(ctx, MAX_PWM);
535 if (ret) {
536 dev_err(dev, "Failed to configure PWM: %d\n", ret);
537 return ret;
538 }
539 timer_setup(&ctx->rpm_timer, sample_timer, 0);
540 ret = devm_add_action_or_reset(dev, pwm_fan_cleanup, ctx);
541 if (ret)
542 return ret;
543
544 ctx->tach_count = platform_irq_count(pdev);
545 if (ctx->tach_count < 0)
546 return dev_err_probe(dev, ctx->tach_count,
547 "Could not get number of fan tachometer inputs\n");
548 dev_dbg(dev, "%d fan tachometer inputs\n", ctx->tach_count);
549
550 if (ctx->tach_count) {
551 channel_count++; /* We also have a FAN channel. */
552
553 ctx->tachs = devm_kcalloc(dev, ctx->tach_count,
554 sizeof(struct pwm_fan_tach),
555 GFP_KERNEL);
556 if (!ctx->tachs)
557 return -ENOMEM;
558
559 ctx->fan_channel.type = hwmon_fan;
560 fan_channel_config = devm_kcalloc(dev, ctx->tach_count + 1,
561 sizeof(u32), GFP_KERNEL);
562 if (!fan_channel_config)
563 return -ENOMEM;
564 ctx->fan_channel.config = fan_channel_config;
565 }
566
567 channels = devm_kcalloc(dev, channel_count + 1,
568 sizeof(struct hwmon_channel_info *), GFP_KERNEL);
569 if (!channels)
570 return -ENOMEM;
571
572 channels[0] = HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE);
573
574 for (i = 0; i < ctx->tach_count; i++) {
575 struct pwm_fan_tach *tach = &ctx->tachs[i];
576 u32 ppr = 2;
577
578 tach->irq = platform_get_irq(pdev, i);
579 if (tach->irq == -EPROBE_DEFER)
580 return tach->irq;
581 if (tach->irq > 0) {
582 ret = devm_request_irq(dev, tach->irq, pulse_handler, 0,
583 pdev->name, tach);
584 if (ret) {
585 dev_err(dev,
586 "Failed to request interrupt: %d\n",
587 ret);
588 return ret;
589 }
590 }
591
592 of_property_read_u32_index(dev->of_node,
593 "pulses-per-revolution",
594 i,
595 &ppr);
596 tach->pulses_per_revolution = ppr;
597 if (!tach->pulses_per_revolution) {
598 dev_err(dev, "pulses-per-revolution can't be zero.\n");
599 return -EINVAL;
600 }
601
602 fan_channel_config[i] = HWMON_F_INPUT;
603
604 dev_dbg(dev, "tach%d: irq=%d, pulses_per_revolution=%d\n",
605 i, tach->irq, tach->pulses_per_revolution);
606 }
607
608 if (ctx->tach_count > 0) {
609 ctx->sample_start = ktime_get();
610 mod_timer(&ctx->rpm_timer, jiffies + HZ);
611
612 channels[1] = &ctx->fan_channel;
613 }
614
615 ctx->info.ops = &pwm_fan_hwmon_ops;
616 ctx->info.info = channels;
617
618 hwmon = devm_hwmon_device_register_with_info(dev, "pwmfan",
619 ctx, &ctx->info, NULL);
620 if (IS_ERR(hwmon)) {
621 dev_err(dev, "Failed to register hwmon device\n");
622 return PTR_ERR(hwmon);
623 }
624
625 ret = pwm_fan_of_get_cooling_data(dev, ctx);
626 if (ret)
627 return ret;
628
629 ctx->pwm_fan_state = ctx->pwm_fan_max_state;
630 if (IS_ENABLED(CONFIG_THERMAL)) {
631 cdev = devm_thermal_of_cooling_device_register(dev,
632 dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops);
633 if (IS_ERR(cdev)) {
634 ret = PTR_ERR(cdev);
635 dev_err(dev,
636 "Failed to register pwm-fan as cooling device: %d\n",
637 ret);
638 return ret;
639 }
640 ctx->cdev = cdev;
641 }
642
643 return 0;
644}
645
646static void pwm_fan_shutdown(struct platform_device *pdev)
647{
648 struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
649
650 pwm_fan_cleanup(ctx);
651}
652
653static int pwm_fan_suspend(struct device *dev)
654{
655 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
656
657 return pwm_fan_power_off(ctx);
658}
659
660static int pwm_fan_resume(struct device *dev)
661{
662 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
663
664 return set_pwm(ctx, ctx->pwm_value);
665}
666
667static DEFINE_SIMPLE_DEV_PM_OPS(pwm_fan_pm, pwm_fan_suspend, pwm_fan_resume);
668
669static const struct of_device_id of_pwm_fan_match[] = {
670 { .compatible = "pwm-fan", },
671 {},
672};
673MODULE_DEVICE_TABLE(of, of_pwm_fan_match);
674
675static struct platform_driver pwm_fan_driver = {
676 .probe = pwm_fan_probe,
677 .shutdown = pwm_fan_shutdown,
678 .driver = {
679 .name = "pwm-fan",
680 .pm = pm_sleep_ptr(&pwm_fan_pm),
681 .of_match_table = of_pwm_fan_match,
682 },
683};
684
685module_platform_driver(pwm_fan_driver);
686
687MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
688MODULE_ALIAS("platform:pwm-fan");
689MODULE_DESCRIPTION("PWM FAN driver");
690MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * pwm-fan.c - Hwmon driver for fans connected to PWM lines.
4 *
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 *
7 * Author: Kamil Debski <k.debski@samsung.com>
8 */
9
10#include <linux/hwmon.h>
11#include <linux/interrupt.h>
12#include <linux/module.h>
13#include <linux/mutex.h>
14#include <linux/of.h>
15#include <linux/platform_device.h>
16#include <linux/pwm.h>
17#include <linux/regulator/consumer.h>
18#include <linux/sysfs.h>
19#include <linux/thermal.h>
20#include <linux/timer.h>
21
22#define MAX_PWM 255
23
24struct pwm_fan_tach {
25 int irq;
26 atomic_t pulses;
27 unsigned int rpm;
28 u8 pulses_per_revolution;
29};
30
31struct pwm_fan_ctx {
32 struct mutex lock;
33 struct pwm_device *pwm;
34 struct pwm_state pwm_state;
35 struct regulator *reg_en;
36
37 int tach_count;
38 struct pwm_fan_tach *tachs;
39 ktime_t sample_start;
40 struct timer_list rpm_timer;
41
42 unsigned int pwm_value;
43 unsigned int pwm_fan_state;
44 unsigned int pwm_fan_max_state;
45 unsigned int *pwm_fan_cooling_levels;
46 struct thermal_cooling_device *cdev;
47
48 struct hwmon_chip_info info;
49 struct hwmon_channel_info fan_channel;
50};
51
52static const u32 pwm_fan_channel_config_pwm[] = {
53 HWMON_PWM_INPUT,
54 0
55};
56
57static const struct hwmon_channel_info pwm_fan_channel_pwm = {
58 .type = hwmon_pwm,
59 .config = pwm_fan_channel_config_pwm,
60};
61
62/* This handler assumes self resetting edge triggered interrupt. */
63static irqreturn_t pulse_handler(int irq, void *dev_id)
64{
65 struct pwm_fan_tach *tach = dev_id;
66
67 atomic_inc(&tach->pulses);
68
69 return IRQ_HANDLED;
70}
71
72static void sample_timer(struct timer_list *t)
73{
74 struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer);
75 unsigned int delta = ktime_ms_delta(ktime_get(), ctx->sample_start);
76 int i;
77
78 if (delta) {
79 for (i = 0; i < ctx->tach_count; i++) {
80 struct pwm_fan_tach *tach = &ctx->tachs[i];
81 int pulses;
82
83 pulses = atomic_read(&tach->pulses);
84 atomic_sub(pulses, &tach->pulses);
85 tach->rpm = (unsigned int)(pulses * 1000 * 60) /
86 (tach->pulses_per_revolution * delta);
87 }
88
89 ctx->sample_start = ktime_get();
90 }
91
92 mod_timer(&ctx->rpm_timer, jiffies + HZ);
93}
94
95static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
96{
97 unsigned long period;
98 int ret = 0;
99 struct pwm_state *state = &ctx->pwm_state;
100
101 mutex_lock(&ctx->lock);
102 if (ctx->pwm_value == pwm)
103 goto exit_set_pwm_err;
104
105 period = state->period;
106 state->duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
107 state->enabled = pwm ? true : false;
108
109 ret = pwm_apply_state(ctx->pwm, state);
110 if (!ret)
111 ctx->pwm_value = pwm;
112exit_set_pwm_err:
113 mutex_unlock(&ctx->lock);
114 return ret;
115}
116
117static void pwm_fan_update_state(struct pwm_fan_ctx *ctx, unsigned long pwm)
118{
119 int i;
120
121 for (i = 0; i < ctx->pwm_fan_max_state; ++i)
122 if (pwm < ctx->pwm_fan_cooling_levels[i + 1])
123 break;
124
125 ctx->pwm_fan_state = i;
126}
127
128static int pwm_fan_write(struct device *dev, enum hwmon_sensor_types type,
129 u32 attr, int channel, long val)
130{
131 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
132 int ret;
133
134 if (val < 0 || val > MAX_PWM)
135 return -EINVAL;
136
137 ret = __set_pwm(ctx, val);
138 if (ret)
139 return ret;
140
141 pwm_fan_update_state(ctx, val);
142 return 0;
143}
144
145static int pwm_fan_read(struct device *dev, enum hwmon_sensor_types type,
146 u32 attr, int channel, long *val)
147{
148 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
149
150 switch (type) {
151 case hwmon_pwm:
152 *val = ctx->pwm_value;
153 return 0;
154
155 case hwmon_fan:
156 *val = ctx->tachs[channel].rpm;
157 return 0;
158
159 default:
160 return -ENOTSUPP;
161 }
162}
163
164static umode_t pwm_fan_is_visible(const void *data,
165 enum hwmon_sensor_types type,
166 u32 attr, int channel)
167{
168 switch (type) {
169 case hwmon_pwm:
170 return 0644;
171
172 case hwmon_fan:
173 return 0444;
174
175 default:
176 return 0;
177 }
178}
179
180static const struct hwmon_ops pwm_fan_hwmon_ops = {
181 .is_visible = pwm_fan_is_visible,
182 .read = pwm_fan_read,
183 .write = pwm_fan_write,
184};
185
186/* thermal cooling device callbacks */
187static int pwm_fan_get_max_state(struct thermal_cooling_device *cdev,
188 unsigned long *state)
189{
190 struct pwm_fan_ctx *ctx = cdev->devdata;
191
192 if (!ctx)
193 return -EINVAL;
194
195 *state = ctx->pwm_fan_max_state;
196
197 return 0;
198}
199
200static int pwm_fan_get_cur_state(struct thermal_cooling_device *cdev,
201 unsigned long *state)
202{
203 struct pwm_fan_ctx *ctx = cdev->devdata;
204
205 if (!ctx)
206 return -EINVAL;
207
208 *state = ctx->pwm_fan_state;
209
210 return 0;
211}
212
213static int
214pwm_fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
215{
216 struct pwm_fan_ctx *ctx = cdev->devdata;
217 int ret;
218
219 if (!ctx || (state > ctx->pwm_fan_max_state))
220 return -EINVAL;
221
222 if (state == ctx->pwm_fan_state)
223 return 0;
224
225 ret = __set_pwm(ctx, ctx->pwm_fan_cooling_levels[state]);
226 if (ret) {
227 dev_err(&cdev->device, "Cannot set pwm!\n");
228 return ret;
229 }
230
231 ctx->pwm_fan_state = state;
232
233 return ret;
234}
235
236static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = {
237 .get_max_state = pwm_fan_get_max_state,
238 .get_cur_state = pwm_fan_get_cur_state,
239 .set_cur_state = pwm_fan_set_cur_state,
240};
241
242static int pwm_fan_of_get_cooling_data(struct device *dev,
243 struct pwm_fan_ctx *ctx)
244{
245 struct device_node *np = dev->of_node;
246 int num, i, ret;
247
248 if (!of_find_property(np, "cooling-levels", NULL))
249 return 0;
250
251 ret = of_property_count_u32_elems(np, "cooling-levels");
252 if (ret <= 0) {
253 dev_err(dev, "Wrong data!\n");
254 return ret ? : -EINVAL;
255 }
256
257 num = ret;
258 ctx->pwm_fan_cooling_levels = devm_kcalloc(dev, num, sizeof(u32),
259 GFP_KERNEL);
260 if (!ctx->pwm_fan_cooling_levels)
261 return -ENOMEM;
262
263 ret = of_property_read_u32_array(np, "cooling-levels",
264 ctx->pwm_fan_cooling_levels, num);
265 if (ret) {
266 dev_err(dev, "Property 'cooling-levels' cannot be read!\n");
267 return ret;
268 }
269
270 for (i = 0; i < num; i++) {
271 if (ctx->pwm_fan_cooling_levels[i] > MAX_PWM) {
272 dev_err(dev, "PWM fan state[%d]:%d > %d\n", i,
273 ctx->pwm_fan_cooling_levels[i], MAX_PWM);
274 return -EINVAL;
275 }
276 }
277
278 ctx->pwm_fan_max_state = num - 1;
279
280 return 0;
281}
282
283static void pwm_fan_regulator_disable(void *data)
284{
285 regulator_disable(data);
286}
287
288static void pwm_fan_pwm_disable(void *__ctx)
289{
290 struct pwm_fan_ctx *ctx = __ctx;
291
292 ctx->pwm_state.enabled = false;
293 pwm_apply_state(ctx->pwm, &ctx->pwm_state);
294 del_timer_sync(&ctx->rpm_timer);
295}
296
297static int pwm_fan_probe(struct platform_device *pdev)
298{
299 struct thermal_cooling_device *cdev;
300 struct device *dev = &pdev->dev;
301 struct pwm_fan_ctx *ctx;
302 struct device *hwmon;
303 int ret;
304 const struct hwmon_channel_info **channels;
305 u32 *fan_channel_config;
306 int channel_count = 1; /* We always have a PWM channel. */
307 int i;
308
309 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
310 if (!ctx)
311 return -ENOMEM;
312
313 mutex_init(&ctx->lock);
314
315 ctx->pwm = devm_of_pwm_get(dev, dev->of_node, NULL);
316 if (IS_ERR(ctx->pwm))
317 return dev_err_probe(dev, PTR_ERR(ctx->pwm), "Could not get PWM\n");
318
319 platform_set_drvdata(pdev, ctx);
320
321 ctx->reg_en = devm_regulator_get_optional(dev, "fan");
322 if (IS_ERR(ctx->reg_en)) {
323 if (PTR_ERR(ctx->reg_en) != -ENODEV)
324 return PTR_ERR(ctx->reg_en);
325
326 ctx->reg_en = NULL;
327 } else {
328 ret = regulator_enable(ctx->reg_en);
329 if (ret) {
330 dev_err(dev, "Failed to enable fan supply: %d\n", ret);
331 return ret;
332 }
333 ret = devm_add_action_or_reset(dev, pwm_fan_regulator_disable,
334 ctx->reg_en);
335 if (ret)
336 return ret;
337 }
338
339 ctx->pwm_value = MAX_PWM;
340
341 pwm_init_state(ctx->pwm, &ctx->pwm_state);
342
343 /*
344 * __set_pwm assumes that MAX_PWM * (period - 1) fits into an unsigned
345 * long. Check this here to prevent the fan running at a too low
346 * frequency.
347 */
348 if (ctx->pwm_state.period > ULONG_MAX / MAX_PWM + 1) {
349 dev_err(dev, "Configured period too big\n");
350 return -EINVAL;
351 }
352
353 /* Set duty cycle to maximum allowed and enable PWM output */
354 ret = __set_pwm(ctx, MAX_PWM);
355 if (ret) {
356 dev_err(dev, "Failed to configure PWM: %d\n", ret);
357 return ret;
358 }
359 timer_setup(&ctx->rpm_timer, sample_timer, 0);
360 ret = devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx);
361 if (ret)
362 return ret;
363
364 ctx->tach_count = platform_irq_count(pdev);
365 if (ctx->tach_count < 0)
366 return dev_err_probe(dev, ctx->tach_count,
367 "Could not get number of fan tachometer inputs\n");
368 dev_dbg(dev, "%d fan tachometer inputs\n", ctx->tach_count);
369
370 if (ctx->tach_count) {
371 channel_count++; /* We also have a FAN channel. */
372
373 ctx->tachs = devm_kcalloc(dev, ctx->tach_count,
374 sizeof(struct pwm_fan_tach),
375 GFP_KERNEL);
376 if (!ctx->tachs)
377 return -ENOMEM;
378
379 ctx->fan_channel.type = hwmon_fan;
380 fan_channel_config = devm_kcalloc(dev, ctx->tach_count + 1,
381 sizeof(u32), GFP_KERNEL);
382 if (!fan_channel_config)
383 return -ENOMEM;
384 ctx->fan_channel.config = fan_channel_config;
385 }
386
387 channels = devm_kcalloc(dev, channel_count + 1,
388 sizeof(struct hwmon_channel_info *), GFP_KERNEL);
389 if (!channels)
390 return -ENOMEM;
391
392 channels[0] = &pwm_fan_channel_pwm;
393
394 for (i = 0; i < ctx->tach_count; i++) {
395 struct pwm_fan_tach *tach = &ctx->tachs[i];
396 u32 ppr = 2;
397
398 tach->irq = platform_get_irq(pdev, i);
399 if (tach->irq == -EPROBE_DEFER)
400 return tach->irq;
401 if (tach->irq > 0) {
402 ret = devm_request_irq(dev, tach->irq, pulse_handler, 0,
403 pdev->name, tach);
404 if (ret) {
405 dev_err(dev,
406 "Failed to request interrupt: %d\n",
407 ret);
408 return ret;
409 }
410 }
411
412 of_property_read_u32_index(dev->of_node,
413 "pulses-per-revolution",
414 i,
415 &ppr);
416 tach->pulses_per_revolution = ppr;
417 if (!tach->pulses_per_revolution) {
418 dev_err(dev, "pulses-per-revolution can't be zero.\n");
419 return -EINVAL;
420 }
421
422 fan_channel_config[i] = HWMON_F_INPUT;
423
424 dev_dbg(dev, "tach%d: irq=%d, pulses_per_revolution=%d\n",
425 i, tach->irq, tach->pulses_per_revolution);
426 }
427
428 if (ctx->tach_count > 0) {
429 ctx->sample_start = ktime_get();
430 mod_timer(&ctx->rpm_timer, jiffies + HZ);
431
432 channels[1] = &ctx->fan_channel;
433 }
434
435 ctx->info.ops = &pwm_fan_hwmon_ops;
436 ctx->info.info = channels;
437
438 hwmon = devm_hwmon_device_register_with_info(dev, "pwmfan",
439 ctx, &ctx->info, NULL);
440 if (IS_ERR(hwmon)) {
441 dev_err(dev, "Failed to register hwmon device\n");
442 return PTR_ERR(hwmon);
443 }
444
445 ret = pwm_fan_of_get_cooling_data(dev, ctx);
446 if (ret)
447 return ret;
448
449 ctx->pwm_fan_state = ctx->pwm_fan_max_state;
450 if (IS_ENABLED(CONFIG_THERMAL)) {
451 cdev = devm_thermal_of_cooling_device_register(dev,
452 dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops);
453 if (IS_ERR(cdev)) {
454 ret = PTR_ERR(cdev);
455 dev_err(dev,
456 "Failed to register pwm-fan as cooling device: %d\n",
457 ret);
458 return ret;
459 }
460 ctx->cdev = cdev;
461 }
462
463 return 0;
464}
465
466static int pwm_fan_disable(struct device *dev)
467{
468 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
469 int ret;
470
471 if (ctx->pwm_value) {
472 /* keep ctx->pwm_state unmodified for pwm_fan_resume() */
473 struct pwm_state state = ctx->pwm_state;
474
475 state.duty_cycle = 0;
476 state.enabled = false;
477 ret = pwm_apply_state(ctx->pwm, &state);
478 if (ret < 0)
479 return ret;
480 }
481
482 if (ctx->reg_en) {
483 ret = regulator_disable(ctx->reg_en);
484 if (ret) {
485 dev_err(dev, "Failed to disable fan supply: %d\n", ret);
486 return ret;
487 }
488 }
489
490 return 0;
491}
492
493static void pwm_fan_shutdown(struct platform_device *pdev)
494{
495 pwm_fan_disable(&pdev->dev);
496}
497
498#ifdef CONFIG_PM_SLEEP
499static int pwm_fan_suspend(struct device *dev)
500{
501 return pwm_fan_disable(dev);
502}
503
504static int pwm_fan_resume(struct device *dev)
505{
506 struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
507 int ret;
508
509 if (ctx->reg_en) {
510 ret = regulator_enable(ctx->reg_en);
511 if (ret) {
512 dev_err(dev, "Failed to enable fan supply: %d\n", ret);
513 return ret;
514 }
515 }
516
517 if (ctx->pwm_value == 0)
518 return 0;
519
520 return pwm_apply_state(ctx->pwm, &ctx->pwm_state);
521}
522#endif
523
524static SIMPLE_DEV_PM_OPS(pwm_fan_pm, pwm_fan_suspend, pwm_fan_resume);
525
526static const struct of_device_id of_pwm_fan_match[] = {
527 { .compatible = "pwm-fan", },
528 {},
529};
530MODULE_DEVICE_TABLE(of, of_pwm_fan_match);
531
532static struct platform_driver pwm_fan_driver = {
533 .probe = pwm_fan_probe,
534 .shutdown = pwm_fan_shutdown,
535 .driver = {
536 .name = "pwm-fan",
537 .pm = &pwm_fan_pm,
538 .of_match_table = of_pwm_fan_match,
539 },
540};
541
542module_platform_driver(pwm_fan_driver);
543
544MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
545MODULE_ALIAS("platform:pwm-fan");
546MODULE_DESCRIPTION("PWM FAN driver");
547MODULE_LICENSE("GPL");