Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * NXP (Philips) SCC+++(SCN+++) serial driver
4 *
5 * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
6 *
7 * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
8 */
9
10#include <linux/clk.h>
11#include <linux/delay.h>
12#include <linux/err.h>
13#include <linux/module.h>
14#include <linux/mod_devicetable.h>
15#include <linux/device.h>
16#include <linux/console.h>
17#include <linux/serial_core.h>
18#include <linux/serial.h>
19#include <linux/io.h>
20#include <linux/tty.h>
21#include <linux/tty_flip.h>
22#include <linux/spinlock.h>
23#include <linux/platform_device.h>
24#include <linux/platform_data/serial-sccnxp.h>
25#include <linux/regulator/consumer.h>
26
27#define SCCNXP_NAME "uart-sccnxp"
28#define SCCNXP_MAJOR 204
29#define SCCNXP_MINOR 205
30
31#define SCCNXP_MR_REG (0x00)
32# define MR0_BAUD_NORMAL (0 << 0)
33# define MR0_BAUD_EXT1 (1 << 0)
34# define MR0_BAUD_EXT2 (5 << 0)
35# define MR0_FIFO (1 << 3)
36# define MR0_TXLVL (1 << 4)
37# define MR1_BITS_5 (0 << 0)
38# define MR1_BITS_6 (1 << 0)
39# define MR1_BITS_7 (2 << 0)
40# define MR1_BITS_8 (3 << 0)
41# define MR1_PAR_EVN (0 << 2)
42# define MR1_PAR_ODD (1 << 2)
43# define MR1_PAR_NO (4 << 2)
44# define MR2_STOP1 (7 << 0)
45# define MR2_STOP2 (0xf << 0)
46#define SCCNXP_SR_REG (0x01)
47# define SR_RXRDY (1 << 0)
48# define SR_FULL (1 << 1)
49# define SR_TXRDY (1 << 2)
50# define SR_TXEMT (1 << 3)
51# define SR_OVR (1 << 4)
52# define SR_PE (1 << 5)
53# define SR_FE (1 << 6)
54# define SR_BRK (1 << 7)
55#define SCCNXP_CSR_REG (SCCNXP_SR_REG)
56# define CSR_TIMER_MODE (0x0d)
57#define SCCNXP_CR_REG (0x02)
58# define CR_RX_ENABLE (1 << 0)
59# define CR_RX_DISABLE (1 << 1)
60# define CR_TX_ENABLE (1 << 2)
61# define CR_TX_DISABLE (1 << 3)
62# define CR_CMD_MRPTR1 (0x01 << 4)
63# define CR_CMD_RX_RESET (0x02 << 4)
64# define CR_CMD_TX_RESET (0x03 << 4)
65# define CR_CMD_STATUS_RESET (0x04 << 4)
66# define CR_CMD_BREAK_RESET (0x05 << 4)
67# define CR_CMD_START_BREAK (0x06 << 4)
68# define CR_CMD_STOP_BREAK (0x07 << 4)
69# define CR_CMD_MRPTR0 (0x0b << 4)
70#define SCCNXP_RHR_REG (0x03)
71#define SCCNXP_THR_REG SCCNXP_RHR_REG
72#define SCCNXP_IPCR_REG (0x04)
73#define SCCNXP_ACR_REG SCCNXP_IPCR_REG
74# define ACR_BAUD0 (0 << 7)
75# define ACR_BAUD1 (1 << 7)
76# define ACR_TIMER_MODE (6 << 4)
77#define SCCNXP_ISR_REG (0x05)
78#define SCCNXP_IMR_REG SCCNXP_ISR_REG
79# define IMR_TXRDY (1 << 0)
80# define IMR_RXRDY (1 << 1)
81# define ISR_TXRDY(x) (1 << ((x * 4) + 0))
82# define ISR_RXRDY(x) (1 << ((x * 4) + 1))
83#define SCCNXP_CTPU_REG (0x06)
84#define SCCNXP_CTPL_REG (0x07)
85#define SCCNXP_IPR_REG (0x0d)
86#define SCCNXP_OPCR_REG SCCNXP_IPR_REG
87#define SCCNXP_SOP_REG (0x0e)
88#define SCCNXP_START_COUNTER_REG SCCNXP_SOP_REG
89#define SCCNXP_ROP_REG (0x0f)
90
91/* Route helpers */
92#define MCTRL_MASK(sig) (0xf << (sig))
93#define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0)
94#define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0)
95
96#define SCCNXP_HAVE_IO 0x00000001
97#define SCCNXP_HAVE_MR0 0x00000002
98
99struct sccnxp_chip {
100 const char *name;
101 unsigned int nr;
102 unsigned long freq_min;
103 unsigned long freq_std;
104 unsigned long freq_max;
105 unsigned int flags;
106 unsigned int fifosize;
107 /* Time between read/write cycles */
108 unsigned int trwd;
109};
110
111struct sccnxp_port {
112 struct uart_driver uart;
113 struct uart_port port[SCCNXP_MAX_UARTS];
114 bool opened[SCCNXP_MAX_UARTS];
115
116 int irq;
117 u8 imr;
118
119 struct sccnxp_chip *chip;
120
121#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
122 struct console console;
123#endif
124
125 spinlock_t lock;
126
127 bool poll;
128 struct timer_list timer;
129
130 struct sccnxp_pdata pdata;
131
132 struct regulator *regulator;
133};
134
135static const struct sccnxp_chip sc2681 = {
136 .name = "SC2681",
137 .nr = 2,
138 .freq_min = 1000000,
139 .freq_std = 3686400,
140 .freq_max = 4000000,
141 .flags = SCCNXP_HAVE_IO,
142 .fifosize = 3,
143 .trwd = 200,
144};
145
146static const struct sccnxp_chip sc2691 = {
147 .name = "SC2691",
148 .nr = 1,
149 .freq_min = 1000000,
150 .freq_std = 3686400,
151 .freq_max = 4000000,
152 .flags = 0,
153 .fifosize = 3,
154 .trwd = 150,
155};
156
157static const struct sccnxp_chip sc2692 = {
158 .name = "SC2692",
159 .nr = 2,
160 .freq_min = 1000000,
161 .freq_std = 3686400,
162 .freq_max = 4000000,
163 .flags = SCCNXP_HAVE_IO,
164 .fifosize = 3,
165 .trwd = 30,
166};
167
168static const struct sccnxp_chip sc2891 = {
169 .name = "SC2891",
170 .nr = 1,
171 .freq_min = 100000,
172 .freq_std = 3686400,
173 .freq_max = 8000000,
174 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
175 .fifosize = 16,
176 .trwd = 27,
177};
178
179static const struct sccnxp_chip sc2892 = {
180 .name = "SC2892",
181 .nr = 2,
182 .freq_min = 100000,
183 .freq_std = 3686400,
184 .freq_max = 8000000,
185 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
186 .fifosize = 16,
187 .trwd = 17,
188};
189
190static const struct sccnxp_chip sc28202 = {
191 .name = "SC28202",
192 .nr = 2,
193 .freq_min = 1000000,
194 .freq_std = 14745600,
195 .freq_max = 50000000,
196 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
197 .fifosize = 256,
198 .trwd = 10,
199};
200
201static const struct sccnxp_chip sc68681 = {
202 .name = "SC68681",
203 .nr = 2,
204 .freq_min = 1000000,
205 .freq_std = 3686400,
206 .freq_max = 4000000,
207 .flags = SCCNXP_HAVE_IO,
208 .fifosize = 3,
209 .trwd = 200,
210};
211
212static const struct sccnxp_chip sc68692 = {
213 .name = "SC68692",
214 .nr = 2,
215 .freq_min = 1000000,
216 .freq_std = 3686400,
217 .freq_max = 4000000,
218 .flags = SCCNXP_HAVE_IO,
219 .fifosize = 3,
220 .trwd = 200,
221};
222
223static u8 sccnxp_read(struct uart_port *port, u8 reg)
224{
225 struct sccnxp_port *s = dev_get_drvdata(port->dev);
226 u8 ret;
227
228 ret = readb(port->membase + (reg << port->regshift));
229
230 ndelay(s->chip->trwd);
231
232 return ret;
233}
234
235static void sccnxp_write(struct uart_port *port, u8 reg, u8 v)
236{
237 struct sccnxp_port *s = dev_get_drvdata(port->dev);
238
239 writeb(v, port->membase + (reg << port->regshift));
240
241 ndelay(s->chip->trwd);
242}
243
244static u8 sccnxp_port_read(struct uart_port *port, u8 reg)
245{
246 return sccnxp_read(port, (port->line << 3) + reg);
247}
248
249static void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v)
250{
251 sccnxp_write(port, (port->line << 3) + reg, v);
252}
253
254static int sccnxp_update_best_err(int a, int b, int *besterr)
255{
256 int err = abs(a - b);
257
258 if (*besterr > err) {
259 *besterr = err;
260 return 0;
261 }
262
263 return 1;
264}
265
266static const struct {
267 u8 csr;
268 u8 acr;
269 u8 mr0;
270 int baud;
271} baud_std[] = {
272 { 0, ACR_BAUD0, MR0_BAUD_NORMAL, 50, },
273 { 0, ACR_BAUD1, MR0_BAUD_NORMAL, 75, },
274 { 1, ACR_BAUD0, MR0_BAUD_NORMAL, 110, },
275 { 2, ACR_BAUD0, MR0_BAUD_NORMAL, 134, },
276 { 3, ACR_BAUD1, MR0_BAUD_NORMAL, 150, },
277 { 3, ACR_BAUD0, MR0_BAUD_NORMAL, 200, },
278 { 4, ACR_BAUD0, MR0_BAUD_NORMAL, 300, },
279 { 0, ACR_BAUD1, MR0_BAUD_EXT1, 450, },
280 { 1, ACR_BAUD0, MR0_BAUD_EXT2, 880, },
281 { 3, ACR_BAUD1, MR0_BAUD_EXT1, 900, },
282 { 5, ACR_BAUD0, MR0_BAUD_NORMAL, 600, },
283 { 7, ACR_BAUD0, MR0_BAUD_NORMAL, 1050, },
284 { 2, ACR_BAUD0, MR0_BAUD_EXT2, 1076, },
285 { 6, ACR_BAUD0, MR0_BAUD_NORMAL, 1200, },
286 { 10, ACR_BAUD1, MR0_BAUD_NORMAL, 1800, },
287 { 7, ACR_BAUD1, MR0_BAUD_NORMAL, 2000, },
288 { 8, ACR_BAUD0, MR0_BAUD_NORMAL, 2400, },
289 { 5, ACR_BAUD1, MR0_BAUD_EXT1, 3600, },
290 { 9, ACR_BAUD0, MR0_BAUD_NORMAL, 4800, },
291 { 10, ACR_BAUD0, MR0_BAUD_NORMAL, 7200, },
292 { 11, ACR_BAUD0, MR0_BAUD_NORMAL, 9600, },
293 { 8, ACR_BAUD0, MR0_BAUD_EXT1, 14400, },
294 { 12, ACR_BAUD1, MR0_BAUD_NORMAL, 19200, },
295 { 9, ACR_BAUD0, MR0_BAUD_EXT1, 28800, },
296 { 12, ACR_BAUD0, MR0_BAUD_NORMAL, 38400, },
297 { 11, ACR_BAUD0, MR0_BAUD_EXT1, 57600, },
298 { 12, ACR_BAUD1, MR0_BAUD_EXT1, 115200, },
299 { 12, ACR_BAUD0, MR0_BAUD_EXT1, 230400, },
300 { 0, 0, 0, 0 }
301};
302
303static int sccnxp_set_baud(struct uart_port *port, int baud)
304{
305 struct sccnxp_port *s = dev_get_drvdata(port->dev);
306 int div_std, tmp_baud, bestbaud = INT_MAX, besterr = INT_MAX;
307 struct sccnxp_chip *chip = s->chip;
308 u8 i, acr = 0, csr = 0, mr0 = 0;
309
310 /* Find divisor to load to the timer preset registers */
311 div_std = DIV_ROUND_CLOSEST(port->uartclk, 2 * 16 * baud);
312 if ((div_std >= 2) && (div_std <= 0xffff)) {
313 bestbaud = DIV_ROUND_CLOSEST(port->uartclk, 2 * 16 * div_std);
314 sccnxp_update_best_err(baud, bestbaud, &besterr);
315 csr = CSR_TIMER_MODE;
316 sccnxp_port_write(port, SCCNXP_CTPU_REG, div_std >> 8);
317 sccnxp_port_write(port, SCCNXP_CTPL_REG, div_std);
318 /* Issue start timer/counter command */
319 sccnxp_port_read(port, SCCNXP_START_COUNTER_REG);
320 }
321
322 /* Find best baud from table */
323 for (i = 0; baud_std[i].baud && besterr; i++) {
324 if (baud_std[i].mr0 && !(chip->flags & SCCNXP_HAVE_MR0))
325 continue;
326 div_std = DIV_ROUND_CLOSEST(chip->freq_std, baud_std[i].baud);
327 tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std);
328 if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) {
329 acr = baud_std[i].acr;
330 csr = baud_std[i].csr;
331 mr0 = baud_std[i].mr0;
332 bestbaud = tmp_baud;
333 }
334 }
335
336 if (chip->flags & SCCNXP_HAVE_MR0) {
337 /* Enable FIFO, set half level for TX */
338 mr0 |= MR0_FIFO | MR0_TXLVL;
339 /* Update MR0 */
340 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0);
341 sccnxp_port_write(port, SCCNXP_MR_REG, mr0);
342 }
343
344 sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE);
345 sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr);
346
347 if (baud != bestbaud)
348 dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n",
349 baud, bestbaud);
350
351 return bestbaud;
352}
353
354static void sccnxp_enable_irq(struct uart_port *port, int mask)
355{
356 struct sccnxp_port *s = dev_get_drvdata(port->dev);
357
358 s->imr |= mask << (port->line * 4);
359 sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
360}
361
362static void sccnxp_disable_irq(struct uart_port *port, int mask)
363{
364 struct sccnxp_port *s = dev_get_drvdata(port->dev);
365
366 s->imr &= ~(mask << (port->line * 4));
367 sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
368}
369
370static void sccnxp_set_bit(struct uart_port *port, int sig, int state)
371{
372 u8 bitmask;
373 struct sccnxp_port *s = dev_get_drvdata(port->dev);
374
375 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) {
376 bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig);
377 if (state)
378 sccnxp_write(port, SCCNXP_SOP_REG, bitmask);
379 else
380 sccnxp_write(port, SCCNXP_ROP_REG, bitmask);
381 }
382}
383
384static void sccnxp_handle_rx(struct uart_port *port)
385{
386 u8 sr, ch, flag;
387
388 for (;;) {
389 sr = sccnxp_port_read(port, SCCNXP_SR_REG);
390 if (!(sr & SR_RXRDY))
391 break;
392 sr &= SR_PE | SR_FE | SR_OVR | SR_BRK;
393
394 ch = sccnxp_port_read(port, SCCNXP_RHR_REG);
395
396 port->icount.rx++;
397 flag = TTY_NORMAL;
398
399 if (unlikely(sr)) {
400 if (sr & SR_BRK) {
401 port->icount.brk++;
402 sccnxp_port_write(port, SCCNXP_CR_REG,
403 CR_CMD_BREAK_RESET);
404 if (uart_handle_break(port))
405 continue;
406 } else if (sr & SR_PE)
407 port->icount.parity++;
408 else if (sr & SR_FE)
409 port->icount.frame++;
410 else if (sr & SR_OVR) {
411 port->icount.overrun++;
412 sccnxp_port_write(port, SCCNXP_CR_REG,
413 CR_CMD_STATUS_RESET);
414 }
415
416 sr &= port->read_status_mask;
417 if (sr & SR_BRK)
418 flag = TTY_BREAK;
419 else if (sr & SR_PE)
420 flag = TTY_PARITY;
421 else if (sr & SR_FE)
422 flag = TTY_FRAME;
423 else if (sr & SR_OVR)
424 flag = TTY_OVERRUN;
425 }
426
427 if (uart_handle_sysrq_char(port, ch))
428 continue;
429
430 if (sr & port->ignore_status_mask)
431 continue;
432
433 uart_insert_char(port, sr, SR_OVR, ch, flag);
434 }
435
436 tty_flip_buffer_push(&port->state->port);
437}
438
439static void sccnxp_handle_tx(struct uart_port *port)
440{
441 u8 sr;
442 struct circ_buf *xmit = &port->state->xmit;
443 struct sccnxp_port *s = dev_get_drvdata(port->dev);
444
445 if (unlikely(port->x_char)) {
446 sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char);
447 port->icount.tx++;
448 port->x_char = 0;
449 return;
450 }
451
452 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
453 /* Disable TX if FIFO is empty */
454 if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) {
455 sccnxp_disable_irq(port, IMR_TXRDY);
456
457 /* Set direction to input */
458 if (s->chip->flags & SCCNXP_HAVE_IO)
459 sccnxp_set_bit(port, DIR_OP, 0);
460 }
461 return;
462 }
463
464 while (!uart_circ_empty(xmit)) {
465 sr = sccnxp_port_read(port, SCCNXP_SR_REG);
466 if (!(sr & SR_TXRDY))
467 break;
468
469 sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]);
470 uart_xmit_advance(port, 1);
471 }
472
473 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
474 uart_write_wakeup(port);
475}
476
477static void sccnxp_handle_events(struct sccnxp_port *s)
478{
479 int i;
480 u8 isr;
481
482 do {
483 isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG);
484 isr &= s->imr;
485 if (!isr)
486 break;
487
488 for (i = 0; i < s->uart.nr; i++) {
489 if (s->opened[i] && (isr & ISR_RXRDY(i)))
490 sccnxp_handle_rx(&s->port[i]);
491 if (s->opened[i] && (isr & ISR_TXRDY(i)))
492 sccnxp_handle_tx(&s->port[i]);
493 }
494 } while (1);
495}
496
497static void sccnxp_timer(struct timer_list *t)
498{
499 struct sccnxp_port *s = from_timer(s, t, timer);
500 unsigned long flags;
501
502 spin_lock_irqsave(&s->lock, flags);
503 sccnxp_handle_events(s);
504 spin_unlock_irqrestore(&s->lock, flags);
505
506 mod_timer(&s->timer, jiffies + usecs_to_jiffies(s->pdata.poll_time_us));
507}
508
509static irqreturn_t sccnxp_ist(int irq, void *dev_id)
510{
511 struct sccnxp_port *s = (struct sccnxp_port *)dev_id;
512 unsigned long flags;
513
514 spin_lock_irqsave(&s->lock, flags);
515 sccnxp_handle_events(s);
516 spin_unlock_irqrestore(&s->lock, flags);
517
518 return IRQ_HANDLED;
519}
520
521static void sccnxp_start_tx(struct uart_port *port)
522{
523 struct sccnxp_port *s = dev_get_drvdata(port->dev);
524 unsigned long flags;
525
526 spin_lock_irqsave(&s->lock, flags);
527
528 /* Set direction to output */
529 if (s->chip->flags & SCCNXP_HAVE_IO)
530 sccnxp_set_bit(port, DIR_OP, 1);
531
532 sccnxp_enable_irq(port, IMR_TXRDY);
533
534 spin_unlock_irqrestore(&s->lock, flags);
535}
536
537static void sccnxp_stop_tx(struct uart_port *port)
538{
539 /* Do nothing */
540}
541
542static void sccnxp_stop_rx(struct uart_port *port)
543{
544 struct sccnxp_port *s = dev_get_drvdata(port->dev);
545 unsigned long flags;
546
547 spin_lock_irqsave(&s->lock, flags);
548 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE);
549 spin_unlock_irqrestore(&s->lock, flags);
550}
551
552static unsigned int sccnxp_tx_empty(struct uart_port *port)
553{
554 u8 val;
555 unsigned long flags;
556 struct sccnxp_port *s = dev_get_drvdata(port->dev);
557
558 spin_lock_irqsave(&s->lock, flags);
559 val = sccnxp_port_read(port, SCCNXP_SR_REG);
560 spin_unlock_irqrestore(&s->lock, flags);
561
562 return (val & SR_TXEMT) ? TIOCSER_TEMT : 0;
563}
564
565static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl)
566{
567 struct sccnxp_port *s = dev_get_drvdata(port->dev);
568 unsigned long flags;
569
570 if (!(s->chip->flags & SCCNXP_HAVE_IO))
571 return;
572
573 spin_lock_irqsave(&s->lock, flags);
574
575 sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR);
576 sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS);
577
578 spin_unlock_irqrestore(&s->lock, flags);
579}
580
581static unsigned int sccnxp_get_mctrl(struct uart_port *port)
582{
583 u8 bitmask, ipr;
584 unsigned long flags;
585 struct sccnxp_port *s = dev_get_drvdata(port->dev);
586 unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
587
588 if (!(s->chip->flags & SCCNXP_HAVE_IO))
589 return mctrl;
590
591 spin_lock_irqsave(&s->lock, flags);
592
593 ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG);
594
595 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) {
596 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
597 DSR_IP);
598 mctrl &= ~TIOCM_DSR;
599 mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0;
600 }
601 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) {
602 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
603 CTS_IP);
604 mctrl &= ~TIOCM_CTS;
605 mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0;
606 }
607 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) {
608 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
609 DCD_IP);
610 mctrl &= ~TIOCM_CAR;
611 mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0;
612 }
613 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) {
614 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
615 RNG_IP);
616 mctrl &= ~TIOCM_RNG;
617 mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0;
618 }
619
620 spin_unlock_irqrestore(&s->lock, flags);
621
622 return mctrl;
623}
624
625static void sccnxp_break_ctl(struct uart_port *port, int break_state)
626{
627 struct sccnxp_port *s = dev_get_drvdata(port->dev);
628 unsigned long flags;
629
630 spin_lock_irqsave(&s->lock, flags);
631 sccnxp_port_write(port, SCCNXP_CR_REG, break_state ?
632 CR_CMD_START_BREAK : CR_CMD_STOP_BREAK);
633 spin_unlock_irqrestore(&s->lock, flags);
634}
635
636static void sccnxp_set_termios(struct uart_port *port,
637 struct ktermios *termios,
638 const struct ktermios *old)
639{
640 struct sccnxp_port *s = dev_get_drvdata(port->dev);
641 unsigned long flags;
642 u8 mr1, mr2;
643 int baud;
644
645 spin_lock_irqsave(&s->lock, flags);
646
647 /* Mask termios capabilities we don't support */
648 termios->c_cflag &= ~CMSPAR;
649
650 /* Disable RX & TX, reset break condition, status and FIFOs */
651 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET |
652 CR_RX_DISABLE | CR_TX_DISABLE);
653 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
654 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
655 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
656
657 /* Word size */
658 switch (termios->c_cflag & CSIZE) {
659 case CS5:
660 mr1 = MR1_BITS_5;
661 break;
662 case CS6:
663 mr1 = MR1_BITS_6;
664 break;
665 case CS7:
666 mr1 = MR1_BITS_7;
667 break;
668 case CS8:
669 default:
670 mr1 = MR1_BITS_8;
671 break;
672 }
673
674 /* Parity */
675 if (termios->c_cflag & PARENB) {
676 if (termios->c_cflag & PARODD)
677 mr1 |= MR1_PAR_ODD;
678 } else
679 mr1 |= MR1_PAR_NO;
680
681 /* Stop bits */
682 mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1;
683
684 /* Update desired format */
685 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1);
686 sccnxp_port_write(port, SCCNXP_MR_REG, mr1);
687 sccnxp_port_write(port, SCCNXP_MR_REG, mr2);
688
689 /* Set read status mask */
690 port->read_status_mask = SR_OVR;
691 if (termios->c_iflag & INPCK)
692 port->read_status_mask |= SR_PE | SR_FE;
693 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
694 port->read_status_mask |= SR_BRK;
695
696 /* Set status ignore mask */
697 port->ignore_status_mask = 0;
698 if (termios->c_iflag & IGNBRK)
699 port->ignore_status_mask |= SR_BRK;
700 if (termios->c_iflag & IGNPAR)
701 port->ignore_status_mask |= SR_PE;
702 if (!(termios->c_cflag & CREAD))
703 port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
704
705 /* Setup baudrate */
706 baud = uart_get_baud_rate(port, termios, old, 50,
707 (s->chip->flags & SCCNXP_HAVE_MR0) ?
708 230400 : 38400);
709 baud = sccnxp_set_baud(port, baud);
710
711 /* Update timeout according to new baud rate */
712 uart_update_timeout(port, termios->c_cflag, baud);
713
714 /* Report actual baudrate back to core */
715 if (tty_termios_baud_rate(termios))
716 tty_termios_encode_baud_rate(termios, baud, baud);
717
718 /* Enable RX & TX */
719 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
720
721 spin_unlock_irqrestore(&s->lock, flags);
722}
723
724static int sccnxp_startup(struct uart_port *port)
725{
726 struct sccnxp_port *s = dev_get_drvdata(port->dev);
727 unsigned long flags;
728
729 spin_lock_irqsave(&s->lock, flags);
730
731 if (s->chip->flags & SCCNXP_HAVE_IO) {
732 /* Outputs are controlled manually */
733 sccnxp_write(port, SCCNXP_OPCR_REG, 0);
734 }
735
736 /* Reset break condition, status and FIFOs */
737 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET);
738 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
739 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
740 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
741
742 /* Enable RX & TX */
743 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
744
745 /* Enable RX interrupt */
746 sccnxp_enable_irq(port, IMR_RXRDY);
747
748 s->opened[port->line] = 1;
749
750 spin_unlock_irqrestore(&s->lock, flags);
751
752 return 0;
753}
754
755static void sccnxp_shutdown(struct uart_port *port)
756{
757 struct sccnxp_port *s = dev_get_drvdata(port->dev);
758 unsigned long flags;
759
760 spin_lock_irqsave(&s->lock, flags);
761
762 s->opened[port->line] = 0;
763
764 /* Disable interrupts */
765 sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
766
767 /* Disable TX & RX */
768 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE);
769
770 /* Leave direction to input */
771 if (s->chip->flags & SCCNXP_HAVE_IO)
772 sccnxp_set_bit(port, DIR_OP, 0);
773
774 spin_unlock_irqrestore(&s->lock, flags);
775}
776
777static const char *sccnxp_type(struct uart_port *port)
778{
779 struct sccnxp_port *s = dev_get_drvdata(port->dev);
780
781 return (port->type == PORT_SC26XX) ? s->chip->name : NULL;
782}
783
784static void sccnxp_release_port(struct uart_port *port)
785{
786 /* Do nothing */
787}
788
789static int sccnxp_request_port(struct uart_port *port)
790{
791 /* Do nothing */
792 return 0;
793}
794
795static void sccnxp_config_port(struct uart_port *port, int flags)
796{
797 if (flags & UART_CONFIG_TYPE)
798 port->type = PORT_SC26XX;
799}
800
801static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s)
802{
803 if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX))
804 return 0;
805 if (s->irq == port->irq)
806 return 0;
807
808 return -EINVAL;
809}
810
811static const struct uart_ops sccnxp_ops = {
812 .tx_empty = sccnxp_tx_empty,
813 .set_mctrl = sccnxp_set_mctrl,
814 .get_mctrl = sccnxp_get_mctrl,
815 .stop_tx = sccnxp_stop_tx,
816 .start_tx = sccnxp_start_tx,
817 .stop_rx = sccnxp_stop_rx,
818 .break_ctl = sccnxp_break_ctl,
819 .startup = sccnxp_startup,
820 .shutdown = sccnxp_shutdown,
821 .set_termios = sccnxp_set_termios,
822 .type = sccnxp_type,
823 .release_port = sccnxp_release_port,
824 .request_port = sccnxp_request_port,
825 .config_port = sccnxp_config_port,
826 .verify_port = sccnxp_verify_port,
827};
828
829#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
830static void sccnxp_console_putchar(struct uart_port *port, unsigned char c)
831{
832 int tryes = 100000;
833
834 while (tryes--) {
835 if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) {
836 sccnxp_port_write(port, SCCNXP_THR_REG, c);
837 break;
838 }
839 barrier();
840 }
841}
842
843static void sccnxp_console_write(struct console *co, const char *c, unsigned n)
844{
845 struct sccnxp_port *s = (struct sccnxp_port *)co->data;
846 struct uart_port *port = &s->port[co->index];
847 unsigned long flags;
848
849 spin_lock_irqsave(&s->lock, flags);
850 uart_console_write(port, c, n, sccnxp_console_putchar);
851 spin_unlock_irqrestore(&s->lock, flags);
852}
853
854static int sccnxp_console_setup(struct console *co, char *options)
855{
856 struct sccnxp_port *s = (struct sccnxp_port *)co->data;
857 struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
858 int baud = 9600, bits = 8, parity = 'n', flow = 'n';
859
860 if (options)
861 uart_parse_options(options, &baud, &parity, &bits, &flow);
862
863 return uart_set_options(port, co, baud, parity, bits, flow);
864}
865#endif
866
867static const struct platform_device_id sccnxp_id_table[] = {
868 { .name = "sc2681", .driver_data = (kernel_ulong_t)&sc2681, },
869 { .name = "sc2691", .driver_data = (kernel_ulong_t)&sc2691, },
870 { .name = "sc2692", .driver_data = (kernel_ulong_t)&sc2692, },
871 { .name = "sc2891", .driver_data = (kernel_ulong_t)&sc2891, },
872 { .name = "sc2892", .driver_data = (kernel_ulong_t)&sc2892, },
873 { .name = "sc28202", .driver_data = (kernel_ulong_t)&sc28202, },
874 { .name = "sc68681", .driver_data = (kernel_ulong_t)&sc68681, },
875 { .name = "sc68692", .driver_data = (kernel_ulong_t)&sc68692, },
876 { }
877};
878MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
879
880static int sccnxp_probe(struct platform_device *pdev)
881{
882 struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev);
883 struct resource *res;
884 int i, ret, uartclk;
885 struct sccnxp_port *s;
886 void __iomem *membase;
887 struct clk *clk;
888
889 membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
890 if (IS_ERR(membase))
891 return PTR_ERR(membase);
892
893 s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL);
894 if (!s) {
895 dev_err(&pdev->dev, "Error allocating port structure\n");
896 return -ENOMEM;
897 }
898 platform_set_drvdata(pdev, s);
899
900 spin_lock_init(&s->lock);
901
902 s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data;
903
904 s->regulator = devm_regulator_get(&pdev->dev, "vcc");
905 if (!IS_ERR(s->regulator)) {
906 ret = regulator_enable(s->regulator);
907 if (ret) {
908 dev_err(&pdev->dev,
909 "Failed to enable regulator: %i\n", ret);
910 return ret;
911 }
912 } else if (PTR_ERR(s->regulator) == -EPROBE_DEFER)
913 return -EPROBE_DEFER;
914
915 clk = devm_clk_get_enabled(&pdev->dev, NULL);
916 if (IS_ERR(clk)) {
917 ret = PTR_ERR(clk);
918 if (ret == -EPROBE_DEFER)
919 goto err_out;
920 uartclk = 0;
921 } else {
922 uartclk = clk_get_rate(clk);
923 }
924
925 if (!uartclk) {
926 dev_notice(&pdev->dev, "Using default clock frequency\n");
927 uartclk = s->chip->freq_std;
928 }
929
930 /* Check input frequency */
931 if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) {
932 dev_err(&pdev->dev, "Frequency out of bounds\n");
933 ret = -EINVAL;
934 goto err_out;
935 }
936
937 if (pdata)
938 memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata));
939
940 if (s->pdata.poll_time_us) {
941 dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n",
942 s->pdata.poll_time_us);
943 s->poll = 1;
944 }
945
946 if (!s->poll) {
947 s->irq = platform_get_irq(pdev, 0);
948 if (s->irq < 0) {
949 ret = -ENXIO;
950 goto err_out;
951 }
952 }
953
954 s->uart.owner = THIS_MODULE;
955 s->uart.dev_name = "ttySC";
956 s->uart.major = SCCNXP_MAJOR;
957 s->uart.minor = SCCNXP_MINOR;
958 s->uart.nr = s->chip->nr;
959#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
960 s->uart.cons = &s->console;
961 s->uart.cons->device = uart_console_device;
962 s->uart.cons->write = sccnxp_console_write;
963 s->uart.cons->setup = sccnxp_console_setup;
964 s->uart.cons->flags = CON_PRINTBUFFER;
965 s->uart.cons->index = -1;
966 s->uart.cons->data = s;
967 strcpy(s->uart.cons->name, "ttySC");
968#endif
969 ret = uart_register_driver(&s->uart);
970 if (ret) {
971 dev_err(&pdev->dev, "Registering UART driver failed\n");
972 goto err_out;
973 }
974
975 for (i = 0; i < s->uart.nr; i++) {
976 s->port[i].line = i;
977 s->port[i].dev = &pdev->dev;
978 s->port[i].irq = s->irq;
979 s->port[i].type = PORT_SC26XX;
980 s->port[i].fifosize = s->chip->fifosize;
981 s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
982 s->port[i].iotype = UPIO_MEM;
983 s->port[i].mapbase = res->start;
984 s->port[i].membase = membase;
985 s->port[i].regshift = s->pdata.reg_shift;
986 s->port[i].uartclk = uartclk;
987 s->port[i].ops = &sccnxp_ops;
988 s->port[i].has_sysrq = IS_ENABLED(CONFIG_SERIAL_SCCNXP_CONSOLE);
989 uart_add_one_port(&s->uart, &s->port[i]);
990 /* Set direction to input */
991 if (s->chip->flags & SCCNXP_HAVE_IO)
992 sccnxp_set_bit(&s->port[i], DIR_OP, 0);
993 }
994
995 /* Disable interrupts */
996 s->imr = 0;
997 sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0);
998
999 if (!s->poll) {
1000 ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL,
1001 sccnxp_ist,
1002 IRQF_TRIGGER_FALLING |
1003 IRQF_ONESHOT,
1004 dev_name(&pdev->dev), s);
1005 if (!ret)
1006 return 0;
1007
1008 dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq);
1009 } else {
1010 timer_setup(&s->timer, sccnxp_timer, 0);
1011 mod_timer(&s->timer, jiffies +
1012 usecs_to_jiffies(s->pdata.poll_time_us));
1013 return 0;
1014 }
1015
1016 uart_unregister_driver(&s->uart);
1017err_out:
1018 if (!IS_ERR(s->regulator))
1019 regulator_disable(s->regulator);
1020
1021 return ret;
1022}
1023
1024static void sccnxp_remove(struct platform_device *pdev)
1025{
1026 int i;
1027 struct sccnxp_port *s = platform_get_drvdata(pdev);
1028
1029 if (!s->poll)
1030 devm_free_irq(&pdev->dev, s->irq, s);
1031 else
1032 del_timer_sync(&s->timer);
1033
1034 for (i = 0; i < s->uart.nr; i++)
1035 uart_remove_one_port(&s->uart, &s->port[i]);
1036
1037 uart_unregister_driver(&s->uart);
1038
1039 if (!IS_ERR(s->regulator)) {
1040 int ret = regulator_disable(s->regulator);
1041 if (ret)
1042 dev_err(&pdev->dev, "Failed to disable regulator\n");
1043 }
1044}
1045
1046static struct platform_driver sccnxp_uart_driver = {
1047 .driver = {
1048 .name = SCCNXP_NAME,
1049 },
1050 .probe = sccnxp_probe,
1051 .remove_new = sccnxp_remove,
1052 .id_table = sccnxp_id_table,
1053};
1054module_platform_driver(sccnxp_uart_driver);
1055
1056MODULE_LICENSE("GPL v2");
1057MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
1058MODULE_DESCRIPTION("SCCNXP serial driver");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * NXP (Philips) SCC+++(SCN+++) serial driver
4 *
5 * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
6 *
7 * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
8 */
9
10#include <linux/clk.h>
11#include <linux/delay.h>
12#include <linux/err.h>
13#include <linux/module.h>
14#include <linux/mod_devicetable.h>
15#include <linux/device.h>
16#include <linux/console.h>
17#include <linux/serial_core.h>
18#include <linux/serial.h>
19#include <linux/io.h>
20#include <linux/tty.h>
21#include <linux/tty_flip.h>
22#include <linux/spinlock.h>
23#include <linux/platform_device.h>
24#include <linux/platform_data/serial-sccnxp.h>
25#include <linux/regulator/consumer.h>
26
27#define SCCNXP_NAME "uart-sccnxp"
28#define SCCNXP_MAJOR 204
29#define SCCNXP_MINOR 205
30
31#define SCCNXP_MR_REG (0x00)
32# define MR0_BAUD_NORMAL (0 << 0)
33# define MR0_BAUD_EXT1 (1 << 0)
34# define MR0_BAUD_EXT2 (5 << 0)
35# define MR0_FIFO (1 << 3)
36# define MR0_TXLVL (1 << 4)
37# define MR1_BITS_5 (0 << 0)
38# define MR1_BITS_6 (1 << 0)
39# define MR1_BITS_7 (2 << 0)
40# define MR1_BITS_8 (3 << 0)
41# define MR1_PAR_EVN (0 << 2)
42# define MR1_PAR_ODD (1 << 2)
43# define MR1_PAR_NO (4 << 2)
44# define MR2_STOP1 (7 << 0)
45# define MR2_STOP2 (0xf << 0)
46#define SCCNXP_SR_REG (0x01)
47# define SR_RXRDY (1 << 0)
48# define SR_FULL (1 << 1)
49# define SR_TXRDY (1 << 2)
50# define SR_TXEMT (1 << 3)
51# define SR_OVR (1 << 4)
52# define SR_PE (1 << 5)
53# define SR_FE (1 << 6)
54# define SR_BRK (1 << 7)
55#define SCCNXP_CSR_REG (SCCNXP_SR_REG)
56# define CSR_TIMER_MODE (0x0d)
57#define SCCNXP_CR_REG (0x02)
58# define CR_RX_ENABLE (1 << 0)
59# define CR_RX_DISABLE (1 << 1)
60# define CR_TX_ENABLE (1 << 2)
61# define CR_TX_DISABLE (1 << 3)
62# define CR_CMD_MRPTR1 (0x01 << 4)
63# define CR_CMD_RX_RESET (0x02 << 4)
64# define CR_CMD_TX_RESET (0x03 << 4)
65# define CR_CMD_STATUS_RESET (0x04 << 4)
66# define CR_CMD_BREAK_RESET (0x05 << 4)
67# define CR_CMD_START_BREAK (0x06 << 4)
68# define CR_CMD_STOP_BREAK (0x07 << 4)
69# define CR_CMD_MRPTR0 (0x0b << 4)
70#define SCCNXP_RHR_REG (0x03)
71#define SCCNXP_THR_REG SCCNXP_RHR_REG
72#define SCCNXP_IPCR_REG (0x04)
73#define SCCNXP_ACR_REG SCCNXP_IPCR_REG
74# define ACR_BAUD0 (0 << 7)
75# define ACR_BAUD1 (1 << 7)
76# define ACR_TIMER_MODE (6 << 4)
77#define SCCNXP_ISR_REG (0x05)
78#define SCCNXP_IMR_REG SCCNXP_ISR_REG
79# define IMR_TXRDY (1 << 0)
80# define IMR_RXRDY (1 << 1)
81# define ISR_TXRDY(x) (1 << ((x * 4) + 0))
82# define ISR_RXRDY(x) (1 << ((x * 4) + 1))
83#define SCCNXP_CTPU_REG (0x06)
84#define SCCNXP_CTPL_REG (0x07)
85#define SCCNXP_IPR_REG (0x0d)
86#define SCCNXP_OPCR_REG SCCNXP_IPR_REG
87#define SCCNXP_SOP_REG (0x0e)
88#define SCCNXP_START_COUNTER_REG SCCNXP_SOP_REG
89#define SCCNXP_ROP_REG (0x0f)
90
91/* Route helpers */
92#define MCTRL_MASK(sig) (0xf << (sig))
93#define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0)
94#define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0)
95
96#define SCCNXP_HAVE_IO 0x00000001
97#define SCCNXP_HAVE_MR0 0x00000002
98
99struct sccnxp_chip {
100 const char *name;
101 unsigned int nr;
102 unsigned long freq_min;
103 unsigned long freq_std;
104 unsigned long freq_max;
105 unsigned int flags;
106 unsigned int fifosize;
107 /* Time between read/write cycles */
108 unsigned int trwd;
109};
110
111struct sccnxp_port {
112 struct uart_driver uart;
113 struct uart_port port[SCCNXP_MAX_UARTS];
114 bool opened[SCCNXP_MAX_UARTS];
115
116 int irq;
117 u8 imr;
118
119 struct sccnxp_chip *chip;
120
121#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
122 struct console console;
123#endif
124
125 spinlock_t lock;
126
127 bool poll;
128 struct timer_list timer;
129
130 struct sccnxp_pdata pdata;
131
132 struct regulator *regulator;
133};
134
135static const struct sccnxp_chip sc2681 = {
136 .name = "SC2681",
137 .nr = 2,
138 .freq_min = 1000000,
139 .freq_std = 3686400,
140 .freq_max = 4000000,
141 .flags = SCCNXP_HAVE_IO,
142 .fifosize = 3,
143 .trwd = 200,
144};
145
146static const struct sccnxp_chip sc2691 = {
147 .name = "SC2691",
148 .nr = 1,
149 .freq_min = 1000000,
150 .freq_std = 3686400,
151 .freq_max = 4000000,
152 .flags = 0,
153 .fifosize = 3,
154 .trwd = 150,
155};
156
157static const struct sccnxp_chip sc2692 = {
158 .name = "SC2692",
159 .nr = 2,
160 .freq_min = 1000000,
161 .freq_std = 3686400,
162 .freq_max = 4000000,
163 .flags = SCCNXP_HAVE_IO,
164 .fifosize = 3,
165 .trwd = 30,
166};
167
168static const struct sccnxp_chip sc2891 = {
169 .name = "SC2891",
170 .nr = 1,
171 .freq_min = 100000,
172 .freq_std = 3686400,
173 .freq_max = 8000000,
174 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
175 .fifosize = 16,
176 .trwd = 27,
177};
178
179static const struct sccnxp_chip sc2892 = {
180 .name = "SC2892",
181 .nr = 2,
182 .freq_min = 100000,
183 .freq_std = 3686400,
184 .freq_max = 8000000,
185 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
186 .fifosize = 16,
187 .trwd = 17,
188};
189
190static const struct sccnxp_chip sc28202 = {
191 .name = "SC28202",
192 .nr = 2,
193 .freq_min = 1000000,
194 .freq_std = 14745600,
195 .freq_max = 50000000,
196 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
197 .fifosize = 256,
198 .trwd = 10,
199};
200
201static const struct sccnxp_chip sc68681 = {
202 .name = "SC68681",
203 .nr = 2,
204 .freq_min = 1000000,
205 .freq_std = 3686400,
206 .freq_max = 4000000,
207 .flags = SCCNXP_HAVE_IO,
208 .fifosize = 3,
209 .trwd = 200,
210};
211
212static const struct sccnxp_chip sc68692 = {
213 .name = "SC68692",
214 .nr = 2,
215 .freq_min = 1000000,
216 .freq_std = 3686400,
217 .freq_max = 4000000,
218 .flags = SCCNXP_HAVE_IO,
219 .fifosize = 3,
220 .trwd = 200,
221};
222
223static u8 sccnxp_read(struct uart_port *port, u8 reg)
224{
225 struct sccnxp_port *s = dev_get_drvdata(port->dev);
226 u8 ret;
227
228 ret = readb(port->membase + (reg << port->regshift));
229
230 ndelay(s->chip->trwd);
231
232 return ret;
233}
234
235static void sccnxp_write(struct uart_port *port, u8 reg, u8 v)
236{
237 struct sccnxp_port *s = dev_get_drvdata(port->dev);
238
239 writeb(v, port->membase + (reg << port->regshift));
240
241 ndelay(s->chip->trwd);
242}
243
244static u8 sccnxp_port_read(struct uart_port *port, u8 reg)
245{
246 return sccnxp_read(port, (port->line << 3) + reg);
247}
248
249static void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v)
250{
251 sccnxp_write(port, (port->line << 3) + reg, v);
252}
253
254static int sccnxp_update_best_err(int a, int b, int *besterr)
255{
256 int err = abs(a - b);
257
258 if (*besterr > err) {
259 *besterr = err;
260 return 0;
261 }
262
263 return 1;
264}
265
266static const struct {
267 u8 csr;
268 u8 acr;
269 u8 mr0;
270 int baud;
271} baud_std[] = {
272 { 0, ACR_BAUD0, MR0_BAUD_NORMAL, 50, },
273 { 0, ACR_BAUD1, MR0_BAUD_NORMAL, 75, },
274 { 1, ACR_BAUD0, MR0_BAUD_NORMAL, 110, },
275 { 2, ACR_BAUD0, MR0_BAUD_NORMAL, 134, },
276 { 3, ACR_BAUD1, MR0_BAUD_NORMAL, 150, },
277 { 3, ACR_BAUD0, MR0_BAUD_NORMAL, 200, },
278 { 4, ACR_BAUD0, MR0_BAUD_NORMAL, 300, },
279 { 0, ACR_BAUD1, MR0_BAUD_EXT1, 450, },
280 { 1, ACR_BAUD0, MR0_BAUD_EXT2, 880, },
281 { 3, ACR_BAUD1, MR0_BAUD_EXT1, 900, },
282 { 5, ACR_BAUD0, MR0_BAUD_NORMAL, 600, },
283 { 7, ACR_BAUD0, MR0_BAUD_NORMAL, 1050, },
284 { 2, ACR_BAUD0, MR0_BAUD_EXT2, 1076, },
285 { 6, ACR_BAUD0, MR0_BAUD_NORMAL, 1200, },
286 { 10, ACR_BAUD1, MR0_BAUD_NORMAL, 1800, },
287 { 7, ACR_BAUD1, MR0_BAUD_NORMAL, 2000, },
288 { 8, ACR_BAUD0, MR0_BAUD_NORMAL, 2400, },
289 { 5, ACR_BAUD1, MR0_BAUD_EXT1, 3600, },
290 { 9, ACR_BAUD0, MR0_BAUD_NORMAL, 4800, },
291 { 10, ACR_BAUD0, MR0_BAUD_NORMAL, 7200, },
292 { 11, ACR_BAUD0, MR0_BAUD_NORMAL, 9600, },
293 { 8, ACR_BAUD0, MR0_BAUD_EXT1, 14400, },
294 { 12, ACR_BAUD1, MR0_BAUD_NORMAL, 19200, },
295 { 9, ACR_BAUD0, MR0_BAUD_EXT1, 28800, },
296 { 12, ACR_BAUD0, MR0_BAUD_NORMAL, 38400, },
297 { 11, ACR_BAUD0, MR0_BAUD_EXT1, 57600, },
298 { 12, ACR_BAUD1, MR0_BAUD_EXT1, 115200, },
299 { 12, ACR_BAUD0, MR0_BAUD_EXT1, 230400, },
300 { 0, 0, 0, 0 }
301};
302
303static int sccnxp_set_baud(struct uart_port *port, int baud)
304{
305 struct sccnxp_port *s = dev_get_drvdata(port->dev);
306 int div_std, tmp_baud, bestbaud = INT_MAX, besterr = INT_MAX;
307 struct sccnxp_chip *chip = s->chip;
308 u8 i, acr = 0, csr = 0, mr0 = 0;
309
310 /* Find divisor to load to the timer preset registers */
311 div_std = DIV_ROUND_CLOSEST(port->uartclk, 2 * 16 * baud);
312 if ((div_std >= 2) && (div_std <= 0xffff)) {
313 bestbaud = DIV_ROUND_CLOSEST(port->uartclk, 2 * 16 * div_std);
314 sccnxp_update_best_err(baud, bestbaud, &besterr);
315 csr = CSR_TIMER_MODE;
316 sccnxp_port_write(port, SCCNXP_CTPU_REG, div_std >> 8);
317 sccnxp_port_write(port, SCCNXP_CTPL_REG, div_std);
318 /* Issue start timer/counter command */
319 sccnxp_port_read(port, SCCNXP_START_COUNTER_REG);
320 }
321
322 /* Find best baud from table */
323 for (i = 0; baud_std[i].baud && besterr; i++) {
324 if (baud_std[i].mr0 && !(chip->flags & SCCNXP_HAVE_MR0))
325 continue;
326 div_std = DIV_ROUND_CLOSEST(chip->freq_std, baud_std[i].baud);
327 tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std);
328 if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) {
329 acr = baud_std[i].acr;
330 csr = baud_std[i].csr;
331 mr0 = baud_std[i].mr0;
332 bestbaud = tmp_baud;
333 }
334 }
335
336 if (chip->flags & SCCNXP_HAVE_MR0) {
337 /* Enable FIFO, set half level for TX */
338 mr0 |= MR0_FIFO | MR0_TXLVL;
339 /* Update MR0 */
340 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0);
341 sccnxp_port_write(port, SCCNXP_MR_REG, mr0);
342 }
343
344 sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE);
345 sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr);
346
347 if (baud != bestbaud)
348 dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n",
349 baud, bestbaud);
350
351 return bestbaud;
352}
353
354static void sccnxp_enable_irq(struct uart_port *port, int mask)
355{
356 struct sccnxp_port *s = dev_get_drvdata(port->dev);
357
358 s->imr |= mask << (port->line * 4);
359 sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
360}
361
362static void sccnxp_disable_irq(struct uart_port *port, int mask)
363{
364 struct sccnxp_port *s = dev_get_drvdata(port->dev);
365
366 s->imr &= ~(mask << (port->line * 4));
367 sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
368}
369
370static void sccnxp_set_bit(struct uart_port *port, int sig, int state)
371{
372 u8 bitmask;
373 struct sccnxp_port *s = dev_get_drvdata(port->dev);
374
375 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) {
376 bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig);
377 if (state)
378 sccnxp_write(port, SCCNXP_SOP_REG, bitmask);
379 else
380 sccnxp_write(port, SCCNXP_ROP_REG, bitmask);
381 }
382}
383
384static void sccnxp_handle_rx(struct uart_port *port)
385{
386 u8 sr;
387 unsigned int ch, flag;
388
389 for (;;) {
390 sr = sccnxp_port_read(port, SCCNXP_SR_REG);
391 if (!(sr & SR_RXRDY))
392 break;
393 sr &= SR_PE | SR_FE | SR_OVR | SR_BRK;
394
395 ch = sccnxp_port_read(port, SCCNXP_RHR_REG);
396
397 port->icount.rx++;
398 flag = TTY_NORMAL;
399
400 if (unlikely(sr)) {
401 if (sr & SR_BRK) {
402 port->icount.brk++;
403 sccnxp_port_write(port, SCCNXP_CR_REG,
404 CR_CMD_BREAK_RESET);
405 if (uart_handle_break(port))
406 continue;
407 } else if (sr & SR_PE)
408 port->icount.parity++;
409 else if (sr & SR_FE)
410 port->icount.frame++;
411 else if (sr & SR_OVR) {
412 port->icount.overrun++;
413 sccnxp_port_write(port, SCCNXP_CR_REG,
414 CR_CMD_STATUS_RESET);
415 }
416
417 sr &= port->read_status_mask;
418 if (sr & SR_BRK)
419 flag = TTY_BREAK;
420 else if (sr & SR_PE)
421 flag = TTY_PARITY;
422 else if (sr & SR_FE)
423 flag = TTY_FRAME;
424 else if (sr & SR_OVR)
425 flag = TTY_OVERRUN;
426 }
427
428 if (uart_handle_sysrq_char(port, ch))
429 continue;
430
431 if (sr & port->ignore_status_mask)
432 continue;
433
434 uart_insert_char(port, sr, SR_OVR, ch, flag);
435 }
436
437 tty_flip_buffer_push(&port->state->port);
438}
439
440static void sccnxp_handle_tx(struct uart_port *port)
441{
442 u8 sr;
443 struct circ_buf *xmit = &port->state->xmit;
444 struct sccnxp_port *s = dev_get_drvdata(port->dev);
445
446 if (unlikely(port->x_char)) {
447 sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char);
448 port->icount.tx++;
449 port->x_char = 0;
450 return;
451 }
452
453 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
454 /* Disable TX if FIFO is empty */
455 if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) {
456 sccnxp_disable_irq(port, IMR_TXRDY);
457
458 /* Set direction to input */
459 if (s->chip->flags & SCCNXP_HAVE_IO)
460 sccnxp_set_bit(port, DIR_OP, 0);
461 }
462 return;
463 }
464
465 while (!uart_circ_empty(xmit)) {
466 sr = sccnxp_port_read(port, SCCNXP_SR_REG);
467 if (!(sr & SR_TXRDY))
468 break;
469
470 sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]);
471 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
472 port->icount.tx++;
473 }
474
475 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
476 uart_write_wakeup(port);
477}
478
479static void sccnxp_handle_events(struct sccnxp_port *s)
480{
481 int i;
482 u8 isr;
483
484 do {
485 isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG);
486 isr &= s->imr;
487 if (!isr)
488 break;
489
490 for (i = 0; i < s->uart.nr; i++) {
491 if (s->opened[i] && (isr & ISR_RXRDY(i)))
492 sccnxp_handle_rx(&s->port[i]);
493 if (s->opened[i] && (isr & ISR_TXRDY(i)))
494 sccnxp_handle_tx(&s->port[i]);
495 }
496 } while (1);
497}
498
499static void sccnxp_timer(struct timer_list *t)
500{
501 struct sccnxp_port *s = from_timer(s, t, timer);
502 unsigned long flags;
503
504 spin_lock_irqsave(&s->lock, flags);
505 sccnxp_handle_events(s);
506 spin_unlock_irqrestore(&s->lock, flags);
507
508 mod_timer(&s->timer, jiffies + usecs_to_jiffies(s->pdata.poll_time_us));
509}
510
511static irqreturn_t sccnxp_ist(int irq, void *dev_id)
512{
513 struct sccnxp_port *s = (struct sccnxp_port *)dev_id;
514 unsigned long flags;
515
516 spin_lock_irqsave(&s->lock, flags);
517 sccnxp_handle_events(s);
518 spin_unlock_irqrestore(&s->lock, flags);
519
520 return IRQ_HANDLED;
521}
522
523static void sccnxp_start_tx(struct uart_port *port)
524{
525 struct sccnxp_port *s = dev_get_drvdata(port->dev);
526 unsigned long flags;
527
528 spin_lock_irqsave(&s->lock, flags);
529
530 /* Set direction to output */
531 if (s->chip->flags & SCCNXP_HAVE_IO)
532 sccnxp_set_bit(port, DIR_OP, 1);
533
534 sccnxp_enable_irq(port, IMR_TXRDY);
535
536 spin_unlock_irqrestore(&s->lock, flags);
537}
538
539static void sccnxp_stop_tx(struct uart_port *port)
540{
541 /* Do nothing */
542}
543
544static void sccnxp_stop_rx(struct uart_port *port)
545{
546 struct sccnxp_port *s = dev_get_drvdata(port->dev);
547 unsigned long flags;
548
549 spin_lock_irqsave(&s->lock, flags);
550 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE);
551 spin_unlock_irqrestore(&s->lock, flags);
552}
553
554static unsigned int sccnxp_tx_empty(struct uart_port *port)
555{
556 u8 val;
557 unsigned long flags;
558 struct sccnxp_port *s = dev_get_drvdata(port->dev);
559
560 spin_lock_irqsave(&s->lock, flags);
561 val = sccnxp_port_read(port, SCCNXP_SR_REG);
562 spin_unlock_irqrestore(&s->lock, flags);
563
564 return (val & SR_TXEMT) ? TIOCSER_TEMT : 0;
565}
566
567static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl)
568{
569 struct sccnxp_port *s = dev_get_drvdata(port->dev);
570 unsigned long flags;
571
572 if (!(s->chip->flags & SCCNXP_HAVE_IO))
573 return;
574
575 spin_lock_irqsave(&s->lock, flags);
576
577 sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR);
578 sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS);
579
580 spin_unlock_irqrestore(&s->lock, flags);
581}
582
583static unsigned int sccnxp_get_mctrl(struct uart_port *port)
584{
585 u8 bitmask, ipr;
586 unsigned long flags;
587 struct sccnxp_port *s = dev_get_drvdata(port->dev);
588 unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
589
590 if (!(s->chip->flags & SCCNXP_HAVE_IO))
591 return mctrl;
592
593 spin_lock_irqsave(&s->lock, flags);
594
595 ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG);
596
597 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) {
598 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
599 DSR_IP);
600 mctrl &= ~TIOCM_DSR;
601 mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0;
602 }
603 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) {
604 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
605 CTS_IP);
606 mctrl &= ~TIOCM_CTS;
607 mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0;
608 }
609 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) {
610 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
611 DCD_IP);
612 mctrl &= ~TIOCM_CAR;
613 mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0;
614 }
615 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) {
616 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
617 RNG_IP);
618 mctrl &= ~TIOCM_RNG;
619 mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0;
620 }
621
622 spin_unlock_irqrestore(&s->lock, flags);
623
624 return mctrl;
625}
626
627static void sccnxp_break_ctl(struct uart_port *port, int break_state)
628{
629 struct sccnxp_port *s = dev_get_drvdata(port->dev);
630 unsigned long flags;
631
632 spin_lock_irqsave(&s->lock, flags);
633 sccnxp_port_write(port, SCCNXP_CR_REG, break_state ?
634 CR_CMD_START_BREAK : CR_CMD_STOP_BREAK);
635 spin_unlock_irqrestore(&s->lock, flags);
636}
637
638static void sccnxp_set_termios(struct uart_port *port,
639 struct ktermios *termios, struct ktermios *old)
640{
641 struct sccnxp_port *s = dev_get_drvdata(port->dev);
642 unsigned long flags;
643 u8 mr1, mr2;
644 int baud;
645
646 spin_lock_irqsave(&s->lock, flags);
647
648 /* Mask termios capabilities we don't support */
649 termios->c_cflag &= ~CMSPAR;
650
651 /* Disable RX & TX, reset break condition, status and FIFOs */
652 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET |
653 CR_RX_DISABLE | CR_TX_DISABLE);
654 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
655 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
656 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
657
658 /* Word size */
659 switch (termios->c_cflag & CSIZE) {
660 case CS5:
661 mr1 = MR1_BITS_5;
662 break;
663 case CS6:
664 mr1 = MR1_BITS_6;
665 break;
666 case CS7:
667 mr1 = MR1_BITS_7;
668 break;
669 case CS8:
670 default:
671 mr1 = MR1_BITS_8;
672 break;
673 }
674
675 /* Parity */
676 if (termios->c_cflag & PARENB) {
677 if (termios->c_cflag & PARODD)
678 mr1 |= MR1_PAR_ODD;
679 } else
680 mr1 |= MR1_PAR_NO;
681
682 /* Stop bits */
683 mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1;
684
685 /* Update desired format */
686 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1);
687 sccnxp_port_write(port, SCCNXP_MR_REG, mr1);
688 sccnxp_port_write(port, SCCNXP_MR_REG, mr2);
689
690 /* Set read status mask */
691 port->read_status_mask = SR_OVR;
692 if (termios->c_iflag & INPCK)
693 port->read_status_mask |= SR_PE | SR_FE;
694 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
695 port->read_status_mask |= SR_BRK;
696
697 /* Set status ignore mask */
698 port->ignore_status_mask = 0;
699 if (termios->c_iflag & IGNBRK)
700 port->ignore_status_mask |= SR_BRK;
701 if (termios->c_iflag & IGNPAR)
702 port->ignore_status_mask |= SR_PE;
703 if (!(termios->c_cflag & CREAD))
704 port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
705
706 /* Setup baudrate */
707 baud = uart_get_baud_rate(port, termios, old, 50,
708 (s->chip->flags & SCCNXP_HAVE_MR0) ?
709 230400 : 38400);
710 baud = sccnxp_set_baud(port, baud);
711
712 /* Update timeout according to new baud rate */
713 uart_update_timeout(port, termios->c_cflag, baud);
714
715 /* Report actual baudrate back to core */
716 if (tty_termios_baud_rate(termios))
717 tty_termios_encode_baud_rate(termios, baud, baud);
718
719 /* Enable RX & TX */
720 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
721
722 spin_unlock_irqrestore(&s->lock, flags);
723}
724
725static int sccnxp_startup(struct uart_port *port)
726{
727 struct sccnxp_port *s = dev_get_drvdata(port->dev);
728 unsigned long flags;
729
730 spin_lock_irqsave(&s->lock, flags);
731
732 if (s->chip->flags & SCCNXP_HAVE_IO) {
733 /* Outputs are controlled manually */
734 sccnxp_write(port, SCCNXP_OPCR_REG, 0);
735 }
736
737 /* Reset break condition, status and FIFOs */
738 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET);
739 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
740 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
741 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
742
743 /* Enable RX & TX */
744 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
745
746 /* Enable RX interrupt */
747 sccnxp_enable_irq(port, IMR_RXRDY);
748
749 s->opened[port->line] = 1;
750
751 spin_unlock_irqrestore(&s->lock, flags);
752
753 return 0;
754}
755
756static void sccnxp_shutdown(struct uart_port *port)
757{
758 struct sccnxp_port *s = dev_get_drvdata(port->dev);
759 unsigned long flags;
760
761 spin_lock_irqsave(&s->lock, flags);
762
763 s->opened[port->line] = 0;
764
765 /* Disable interrupts */
766 sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
767
768 /* Disable TX & RX */
769 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE);
770
771 /* Leave direction to input */
772 if (s->chip->flags & SCCNXP_HAVE_IO)
773 sccnxp_set_bit(port, DIR_OP, 0);
774
775 spin_unlock_irqrestore(&s->lock, flags);
776}
777
778static const char *sccnxp_type(struct uart_port *port)
779{
780 struct sccnxp_port *s = dev_get_drvdata(port->dev);
781
782 return (port->type == PORT_SC26XX) ? s->chip->name : NULL;
783}
784
785static void sccnxp_release_port(struct uart_port *port)
786{
787 /* Do nothing */
788}
789
790static int sccnxp_request_port(struct uart_port *port)
791{
792 /* Do nothing */
793 return 0;
794}
795
796static void sccnxp_config_port(struct uart_port *port, int flags)
797{
798 if (flags & UART_CONFIG_TYPE)
799 port->type = PORT_SC26XX;
800}
801
802static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s)
803{
804 if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX))
805 return 0;
806 if (s->irq == port->irq)
807 return 0;
808
809 return -EINVAL;
810}
811
812static const struct uart_ops sccnxp_ops = {
813 .tx_empty = sccnxp_tx_empty,
814 .set_mctrl = sccnxp_set_mctrl,
815 .get_mctrl = sccnxp_get_mctrl,
816 .stop_tx = sccnxp_stop_tx,
817 .start_tx = sccnxp_start_tx,
818 .stop_rx = sccnxp_stop_rx,
819 .break_ctl = sccnxp_break_ctl,
820 .startup = sccnxp_startup,
821 .shutdown = sccnxp_shutdown,
822 .set_termios = sccnxp_set_termios,
823 .type = sccnxp_type,
824 .release_port = sccnxp_release_port,
825 .request_port = sccnxp_request_port,
826 .config_port = sccnxp_config_port,
827 .verify_port = sccnxp_verify_port,
828};
829
830#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
831static void sccnxp_console_putchar(struct uart_port *port, int c)
832{
833 int tryes = 100000;
834
835 while (tryes--) {
836 if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) {
837 sccnxp_port_write(port, SCCNXP_THR_REG, c);
838 break;
839 }
840 barrier();
841 }
842}
843
844static void sccnxp_console_write(struct console *co, const char *c, unsigned n)
845{
846 struct sccnxp_port *s = (struct sccnxp_port *)co->data;
847 struct uart_port *port = &s->port[co->index];
848 unsigned long flags;
849
850 spin_lock_irqsave(&s->lock, flags);
851 uart_console_write(port, c, n, sccnxp_console_putchar);
852 spin_unlock_irqrestore(&s->lock, flags);
853}
854
855static int sccnxp_console_setup(struct console *co, char *options)
856{
857 struct sccnxp_port *s = (struct sccnxp_port *)co->data;
858 struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
859 int baud = 9600, bits = 8, parity = 'n', flow = 'n';
860
861 if (options)
862 uart_parse_options(options, &baud, &parity, &bits, &flow);
863
864 return uart_set_options(port, co, baud, parity, bits, flow);
865}
866#endif
867
868static const struct platform_device_id sccnxp_id_table[] = {
869 { .name = "sc2681", .driver_data = (kernel_ulong_t)&sc2681, },
870 { .name = "sc2691", .driver_data = (kernel_ulong_t)&sc2691, },
871 { .name = "sc2692", .driver_data = (kernel_ulong_t)&sc2692, },
872 { .name = "sc2891", .driver_data = (kernel_ulong_t)&sc2891, },
873 { .name = "sc2892", .driver_data = (kernel_ulong_t)&sc2892, },
874 { .name = "sc28202", .driver_data = (kernel_ulong_t)&sc28202, },
875 { .name = "sc68681", .driver_data = (kernel_ulong_t)&sc68681, },
876 { .name = "sc68692", .driver_data = (kernel_ulong_t)&sc68692, },
877 { }
878};
879MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
880
881static int sccnxp_probe(struct platform_device *pdev)
882{
883 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
884 struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev);
885 int i, ret, uartclk;
886 struct sccnxp_port *s;
887 void __iomem *membase;
888 struct clk *clk;
889
890 membase = devm_ioremap_resource(&pdev->dev, res);
891 if (IS_ERR(membase))
892 return PTR_ERR(membase);
893
894 s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL);
895 if (!s) {
896 dev_err(&pdev->dev, "Error allocating port structure\n");
897 return -ENOMEM;
898 }
899 platform_set_drvdata(pdev, s);
900
901 spin_lock_init(&s->lock);
902
903 s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data;
904
905 s->regulator = devm_regulator_get(&pdev->dev, "vcc");
906 if (!IS_ERR(s->regulator)) {
907 ret = regulator_enable(s->regulator);
908 if (ret) {
909 dev_err(&pdev->dev,
910 "Failed to enable regulator: %i\n", ret);
911 return ret;
912 }
913 } else if (PTR_ERR(s->regulator) == -EPROBE_DEFER)
914 return -EPROBE_DEFER;
915
916 clk = devm_clk_get(&pdev->dev, NULL);
917 if (IS_ERR(clk)) {
918 ret = PTR_ERR(clk);
919 if (ret == -EPROBE_DEFER)
920 goto err_out;
921 uartclk = 0;
922 } else {
923 ret = clk_prepare_enable(clk);
924 if (ret)
925 goto err_out;
926
927 ret = devm_add_action_or_reset(&pdev->dev,
928 (void(*)(void *))clk_disable_unprepare,
929 clk);
930 if (ret)
931 goto err_out;
932
933 uartclk = clk_get_rate(clk);
934 }
935
936 if (!uartclk) {
937 dev_notice(&pdev->dev, "Using default clock frequency\n");
938 uartclk = s->chip->freq_std;
939 }
940
941 /* Check input frequency */
942 if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) {
943 dev_err(&pdev->dev, "Frequency out of bounds\n");
944 ret = -EINVAL;
945 goto err_out;
946 }
947
948 if (pdata)
949 memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata));
950
951 if (s->pdata.poll_time_us) {
952 dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n",
953 s->pdata.poll_time_us);
954 s->poll = 1;
955 }
956
957 if (!s->poll) {
958 s->irq = platform_get_irq(pdev, 0);
959 if (s->irq < 0) {
960 ret = -ENXIO;
961 goto err_out;
962 }
963 }
964
965 s->uart.owner = THIS_MODULE;
966 s->uart.dev_name = "ttySC";
967 s->uart.major = SCCNXP_MAJOR;
968 s->uart.minor = SCCNXP_MINOR;
969 s->uart.nr = s->chip->nr;
970#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
971 s->uart.cons = &s->console;
972 s->uart.cons->device = uart_console_device;
973 s->uart.cons->write = sccnxp_console_write;
974 s->uart.cons->setup = sccnxp_console_setup;
975 s->uart.cons->flags = CON_PRINTBUFFER;
976 s->uart.cons->index = -1;
977 s->uart.cons->data = s;
978 strcpy(s->uart.cons->name, "ttySC");
979#endif
980 ret = uart_register_driver(&s->uart);
981 if (ret) {
982 dev_err(&pdev->dev, "Registering UART driver failed\n");
983 goto err_out;
984 }
985
986 for (i = 0; i < s->uart.nr; i++) {
987 s->port[i].line = i;
988 s->port[i].dev = &pdev->dev;
989 s->port[i].irq = s->irq;
990 s->port[i].type = PORT_SC26XX;
991 s->port[i].fifosize = s->chip->fifosize;
992 s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
993 s->port[i].iotype = UPIO_MEM;
994 s->port[i].mapbase = res->start;
995 s->port[i].membase = membase;
996 s->port[i].regshift = s->pdata.reg_shift;
997 s->port[i].uartclk = uartclk;
998 s->port[i].ops = &sccnxp_ops;
999 s->port[i].has_sysrq = IS_ENABLED(CONFIG_SERIAL_SCCNXP_CONSOLE);
1000 uart_add_one_port(&s->uart, &s->port[i]);
1001 /* Set direction to input */
1002 if (s->chip->flags & SCCNXP_HAVE_IO)
1003 sccnxp_set_bit(&s->port[i], DIR_OP, 0);
1004 }
1005
1006 /* Disable interrupts */
1007 s->imr = 0;
1008 sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0);
1009
1010 if (!s->poll) {
1011 ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL,
1012 sccnxp_ist,
1013 IRQF_TRIGGER_FALLING |
1014 IRQF_ONESHOT,
1015 dev_name(&pdev->dev), s);
1016 if (!ret)
1017 return 0;
1018
1019 dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq);
1020 } else {
1021 timer_setup(&s->timer, sccnxp_timer, 0);
1022 mod_timer(&s->timer, jiffies +
1023 usecs_to_jiffies(s->pdata.poll_time_us));
1024 return 0;
1025 }
1026
1027 uart_unregister_driver(&s->uart);
1028err_out:
1029 if (!IS_ERR(s->regulator))
1030 regulator_disable(s->regulator);
1031
1032 return ret;
1033}
1034
1035static int sccnxp_remove(struct platform_device *pdev)
1036{
1037 int i;
1038 struct sccnxp_port *s = platform_get_drvdata(pdev);
1039
1040 if (!s->poll)
1041 devm_free_irq(&pdev->dev, s->irq, s);
1042 else
1043 del_timer_sync(&s->timer);
1044
1045 for (i = 0; i < s->uart.nr; i++)
1046 uart_remove_one_port(&s->uart, &s->port[i]);
1047
1048 uart_unregister_driver(&s->uart);
1049
1050 if (!IS_ERR(s->regulator))
1051 return regulator_disable(s->regulator);
1052
1053 return 0;
1054}
1055
1056static struct platform_driver sccnxp_uart_driver = {
1057 .driver = {
1058 .name = SCCNXP_NAME,
1059 },
1060 .probe = sccnxp_probe,
1061 .remove = sccnxp_remove,
1062 .id_table = sccnxp_id_table,
1063};
1064module_platform_driver(sccnxp_uart_driver);
1065
1066MODULE_LICENSE("GPL v2");
1067MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
1068MODULE_DESCRIPTION("SCCNXP serial driver");