Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
4 */
5#include <linux/kernel.h>
6#include <linux/serial.h>
7#include <linux/serial_reg.h>
8#include <linux/slab.h>
9#include <linux/module.h>
10#include <linux/pci.h>
11#include <linux/console.h>
12#include <linux/serial_core.h>
13#include <linux/tty.h>
14#include <linux/tty_flip.h>
15#include <linux/interrupt.h>
16#include <linux/io.h>
17#include <linux/dmi.h>
18#include <linux/nmi.h>
19#include <linux/delay.h>
20#include <linux/of.h>
21
22#include <linux/debugfs.h>
23#include <linux/dmaengine.h>
24#include <linux/pch_dma.h>
25
26enum {
27 PCH_UART_HANDLED_RX_INT_SHIFT,
28 PCH_UART_HANDLED_TX_INT_SHIFT,
29 PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
30 PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
31 PCH_UART_HANDLED_MS_INT_SHIFT,
32 PCH_UART_HANDLED_LS_INT_SHIFT,
33};
34
35#define PCH_UART_DRIVER_DEVICE "ttyPCH"
36
37/* Set the max number of UART port
38 * Intel EG20T PCH: 4 port
39 * LAPIS Semiconductor ML7213 IOH: 3 port
40 * LAPIS Semiconductor ML7223 IOH: 2 port
41*/
42#define PCH_UART_NR 4
43
44#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
45#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
46#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\
47 PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
48#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\
49 PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
50#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
51
52#define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
53
54#define PCH_UART_RBR 0x00
55#define PCH_UART_THR 0x00
56
57#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
58 PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
59#define PCH_UART_IER_ERBFI 0x00000001
60#define PCH_UART_IER_ETBEI 0x00000002
61#define PCH_UART_IER_ELSI 0x00000004
62#define PCH_UART_IER_EDSSI 0x00000008
63
64#define PCH_UART_IIR_IP 0x00000001
65#define PCH_UART_IIR_IID 0x00000006
66#define PCH_UART_IIR_MSI 0x00000000
67#define PCH_UART_IIR_TRI 0x00000002
68#define PCH_UART_IIR_RRI 0x00000004
69#define PCH_UART_IIR_REI 0x00000006
70#define PCH_UART_IIR_TOI 0x00000008
71#define PCH_UART_IIR_FIFO256 0x00000020
72#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256
73#define PCH_UART_IIR_FE 0x000000C0
74
75#define PCH_UART_FCR_FIFOE 0x00000001
76#define PCH_UART_FCR_RFR 0x00000002
77#define PCH_UART_FCR_TFR 0x00000004
78#define PCH_UART_FCR_DMS 0x00000008
79#define PCH_UART_FCR_FIFO256 0x00000020
80#define PCH_UART_FCR_RFTL 0x000000C0
81
82#define PCH_UART_FCR_RFTL1 0x00000000
83#define PCH_UART_FCR_RFTL64 0x00000040
84#define PCH_UART_FCR_RFTL128 0x00000080
85#define PCH_UART_FCR_RFTL224 0x000000C0
86#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64
87#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128
88#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224
89#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64
90#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128
91#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224
92#define PCH_UART_FCR_RFTL_SHIFT 6
93
94#define PCH_UART_LCR_WLS 0x00000003
95#define PCH_UART_LCR_STB 0x00000004
96#define PCH_UART_LCR_PEN 0x00000008
97#define PCH_UART_LCR_EPS 0x00000010
98#define PCH_UART_LCR_SP 0x00000020
99#define PCH_UART_LCR_SB 0x00000040
100#define PCH_UART_LCR_DLAB 0x00000080
101#define PCH_UART_LCR_NP 0x00000000
102#define PCH_UART_LCR_OP PCH_UART_LCR_PEN
103#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
104#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
105#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
106 PCH_UART_LCR_SP)
107
108#define PCH_UART_LCR_5BIT 0x00000000
109#define PCH_UART_LCR_6BIT 0x00000001
110#define PCH_UART_LCR_7BIT 0x00000002
111#define PCH_UART_LCR_8BIT 0x00000003
112
113#define PCH_UART_MCR_DTR 0x00000001
114#define PCH_UART_MCR_RTS 0x00000002
115#define PCH_UART_MCR_OUT 0x0000000C
116#define PCH_UART_MCR_LOOP 0x00000010
117#define PCH_UART_MCR_AFE 0x00000020
118
119#define PCH_UART_LSR_DR 0x00000001
120#define PCH_UART_LSR_ERR (1<<7)
121
122#define PCH_UART_MSR_DCTS 0x00000001
123#define PCH_UART_MSR_DDSR 0x00000002
124#define PCH_UART_MSR_TERI 0x00000004
125#define PCH_UART_MSR_DDCD 0x00000008
126#define PCH_UART_MSR_CTS 0x00000010
127#define PCH_UART_MSR_DSR 0x00000020
128#define PCH_UART_MSR_RI 0x00000040
129#define PCH_UART_MSR_DCD 0x00000080
130#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
131 PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
132
133#define PCH_UART_DLL 0x00
134#define PCH_UART_DLM 0x01
135
136#define PCH_UART_BRCSR 0x0E
137
138#define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
139#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
140#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
141#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI)
142#define PCH_UART_IID_MS (PCH_UART_IIR_MSI)
143
144#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP)
145#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP)
146#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP)
147#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P)
148#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P)
149#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT)
150#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT)
151#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT)
152#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT)
153#define PCH_UART_HAL_STB1 0
154#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB)
155
156#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR)
157#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR)
158#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \
159 PCH_UART_HAL_CLR_RX_FIFO)
160
161#define PCH_UART_HAL_DMA_MODE0 0
162#define PCH_UART_HAL_FIFO_DIS 0
163#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE)
164#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \
165 PCH_UART_FCR_FIFO256)
166#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256)
167#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1)
168#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64)
169#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128)
170#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224)
171#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16)
172#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32)
173#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56)
174#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4)
175#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8)
176#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14)
177#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64)
178#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128)
179#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224)
180
181#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI)
182#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI)
183#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI)
184#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI)
185#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK)
186
187#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR)
188#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS)
189#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT)
190#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
191#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
192
193#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */
194#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
195#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
196#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
197#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
198#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */
199
200struct pch_uart_buffer {
201 unsigned char *buf;
202 int size;
203};
204
205struct eg20t_port {
206 struct uart_port port;
207 int port_type;
208 void __iomem *membase;
209 resource_size_t mapbase;
210 unsigned int iobase;
211 struct pci_dev *pdev;
212 int fifo_size;
213 unsigned int uartclk;
214 int start_tx;
215 int start_rx;
216 int tx_empty;
217 int trigger;
218 int trigger_level;
219 struct pch_uart_buffer rxbuf;
220 unsigned int dmsr;
221 unsigned int fcr;
222 unsigned int mcr;
223 unsigned int use_dma;
224 struct dma_async_tx_descriptor *desc_tx;
225 struct dma_async_tx_descriptor *desc_rx;
226 struct pch_dma_slave param_tx;
227 struct pch_dma_slave param_rx;
228 struct dma_chan *chan_tx;
229 struct dma_chan *chan_rx;
230 struct scatterlist *sg_tx_p;
231 int nent;
232 int orig_nent;
233 struct scatterlist sg_rx;
234 int tx_dma_use;
235 void *rx_buf_virt;
236 dma_addr_t rx_buf_dma;
237
238#define IRQ_NAME_SIZE 17
239 char irq_name[IRQ_NAME_SIZE];
240
241 /* protect the eg20t_port private structure and io access to membase */
242 spinlock_t lock;
243};
244
245/**
246 * struct pch_uart_driver_data - private data structure for UART-DMA
247 * @port_type: The type of UART port
248 * @line_no: UART port line number (0, 1, 2...)
249 */
250struct pch_uart_driver_data {
251 int port_type;
252 int line_no;
253};
254
255enum pch_uart_num_t {
256 pch_et20t_uart0 = 0,
257 pch_et20t_uart1,
258 pch_et20t_uart2,
259 pch_et20t_uart3,
260 pch_ml7213_uart0,
261 pch_ml7213_uart1,
262 pch_ml7213_uart2,
263 pch_ml7223_uart0,
264 pch_ml7223_uart1,
265 pch_ml7831_uart0,
266 pch_ml7831_uart1,
267};
268
269static struct pch_uart_driver_data drv_dat[] = {
270 [pch_et20t_uart0] = {PORT_PCH_8LINE, 0},
271 [pch_et20t_uart1] = {PORT_PCH_2LINE, 1},
272 [pch_et20t_uart2] = {PORT_PCH_2LINE, 2},
273 [pch_et20t_uart3] = {PORT_PCH_2LINE, 3},
274 [pch_ml7213_uart0] = {PORT_PCH_8LINE, 0},
275 [pch_ml7213_uart1] = {PORT_PCH_2LINE, 1},
276 [pch_ml7213_uart2] = {PORT_PCH_2LINE, 2},
277 [pch_ml7223_uart0] = {PORT_PCH_8LINE, 0},
278 [pch_ml7223_uart1] = {PORT_PCH_2LINE, 1},
279 [pch_ml7831_uart0] = {PORT_PCH_8LINE, 0},
280 [pch_ml7831_uart1] = {PORT_PCH_2LINE, 1},
281};
282
283#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
284static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
285#endif
286static unsigned int default_baud = 9600;
287static unsigned int user_uartclk = 0;
288static const int trigger_level_256[4] = { 1, 64, 128, 224 };
289static const int trigger_level_64[4] = { 1, 16, 32, 56 };
290static const int trigger_level_16[4] = { 1, 4, 8, 14 };
291static const int trigger_level_1[4] = { 1, 1, 1, 1 };
292
293#define PCH_REGS_BUFSIZE 1024
294
295
296static ssize_t port_show_regs(struct file *file, char __user *user_buf,
297 size_t count, loff_t *ppos)
298{
299 struct eg20t_port *priv = file->private_data;
300 char *buf;
301 u32 len = 0;
302 ssize_t ret;
303 unsigned char lcr;
304
305 buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL);
306 if (!buf)
307 return 0;
308
309 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
310 "PCH EG20T port[%d] regs:\n", priv->port.line);
311
312 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
313 "=================================\n");
314 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
315 "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER));
316 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
317 "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR));
318 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
319 "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR));
320 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
321 "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR));
322 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
323 "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR));
324 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
325 "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR));
326 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
327 "BRCSR: \t0x%02x\n",
328 ioread8(priv->membase + PCH_UART_BRCSR));
329
330 lcr = ioread8(priv->membase + UART_LCR);
331 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
332 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
333 "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL));
334 len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
335 "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM));
336 iowrite8(lcr, priv->membase + UART_LCR);
337
338 if (len > PCH_REGS_BUFSIZE)
339 len = PCH_REGS_BUFSIZE;
340
341 ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
342 kfree(buf);
343 return ret;
344}
345
346static const struct file_operations port_regs_ops = {
347 .owner = THIS_MODULE,
348 .open = simple_open,
349 .read = port_show_regs,
350 .llseek = default_llseek,
351};
352
353static const struct dmi_system_id pch_uart_dmi_table[] = {
354 {
355 .ident = "CM-iTC",
356 {
357 DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
358 },
359 (void *)CMITC_UARTCLK,
360 },
361 {
362 .ident = "FRI2",
363 {
364 DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
365 },
366 (void *)FRI2_64_UARTCLK,
367 },
368 {
369 .ident = "Fish River Island II",
370 {
371 DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
372 },
373 (void *)FRI2_48_UARTCLK,
374 },
375 {
376 .ident = "COMe-mTT",
377 {
378 DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
379 },
380 (void *)NTC1_UARTCLK,
381 },
382 {
383 .ident = "nanoETXexpress-TT",
384 {
385 DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
386 },
387 (void *)NTC1_UARTCLK,
388 },
389 {
390 .ident = "MinnowBoard",
391 {
392 DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
393 },
394 (void *)MINNOW_UARTCLK,
395 },
396 { }
397};
398
399/* Return UART clock, checking for board specific clocks. */
400static unsigned int pch_uart_get_uartclk(void)
401{
402 const struct dmi_system_id *d;
403
404 if (user_uartclk)
405 return user_uartclk;
406
407 d = dmi_first_match(pch_uart_dmi_table);
408 if (d)
409 return (unsigned long)d->driver_data;
410
411 return DEFAULT_UARTCLK;
412}
413
414static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
415 unsigned int flag)
416{
417 u8 ier = ioread8(priv->membase + UART_IER);
418 ier |= flag & PCH_UART_IER_MASK;
419 iowrite8(ier, priv->membase + UART_IER);
420}
421
422static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
423 unsigned int flag)
424{
425 u8 ier = ioread8(priv->membase + UART_IER);
426 ier &= ~(flag & PCH_UART_IER_MASK);
427 iowrite8(ier, priv->membase + UART_IER);
428}
429
430static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud,
431 unsigned int parity, unsigned int bits,
432 unsigned int stb)
433{
434 unsigned int dll, dlm, lcr;
435 int div;
436
437 div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
438 if (div < 0 || USHRT_MAX <= div) {
439 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
440 return -EINVAL;
441 }
442
443 dll = (unsigned int)div & 0x00FFU;
444 dlm = ((unsigned int)div >> 8) & 0x00FFU;
445
446 if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
447 dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
448 return -EINVAL;
449 }
450
451 if (bits & ~PCH_UART_LCR_WLS) {
452 dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
453 return -EINVAL;
454 }
455
456 if (stb & ~PCH_UART_LCR_STB) {
457 dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
458 return -EINVAL;
459 }
460
461 lcr = parity;
462 lcr |= bits;
463 lcr |= stb;
464
465 dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n",
466 __func__, baud, div, lcr, jiffies);
467 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
468 iowrite8(dll, priv->membase + PCH_UART_DLL);
469 iowrite8(dlm, priv->membase + PCH_UART_DLM);
470 iowrite8(lcr, priv->membase + UART_LCR);
471
472 return 0;
473}
474
475static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
476 unsigned int flag)
477{
478 if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
479 dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
480 __func__, flag);
481 return -EINVAL;
482 }
483
484 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
485 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
486 priv->membase + UART_FCR);
487 iowrite8(priv->fcr, priv->membase + UART_FCR);
488
489 return 0;
490}
491
492static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
493 unsigned int dmamode,
494 unsigned int fifo_size, unsigned int trigger)
495{
496 u8 fcr;
497
498 if (dmamode & ~PCH_UART_FCR_DMS) {
499 dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
500 __func__, dmamode);
501 return -EINVAL;
502 }
503
504 if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
505 dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
506 __func__, fifo_size);
507 return -EINVAL;
508 }
509
510 if (trigger & ~PCH_UART_FCR_RFTL) {
511 dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
512 __func__, trigger);
513 return -EINVAL;
514 }
515
516 switch (priv->fifo_size) {
517 case 256:
518 priv->trigger_level =
519 trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
520 break;
521 case 64:
522 priv->trigger_level =
523 trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
524 break;
525 case 16:
526 priv->trigger_level =
527 trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
528 break;
529 default:
530 priv->trigger_level =
531 trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
532 break;
533 }
534 fcr =
535 dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
536 iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
537 iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
538 priv->membase + UART_FCR);
539 iowrite8(fcr, priv->membase + UART_FCR);
540 priv->fcr = fcr;
541
542 return 0;
543}
544
545static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
546{
547 unsigned int msr = ioread8(priv->membase + UART_MSR);
548 priv->dmsr = msr & PCH_UART_MSR_DELTA;
549 return (u8)msr;
550}
551
552static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
553 int rx_size)
554{
555 int i;
556 u8 rbr, lsr;
557 struct uart_port *port = &priv->port;
558
559 lsr = ioread8(priv->membase + UART_LSR);
560 for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
561 i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI);
562 lsr = ioread8(priv->membase + UART_LSR)) {
563 rbr = ioread8(priv->membase + PCH_UART_RBR);
564
565 if (lsr & UART_LSR_BI) {
566 port->icount.brk++;
567 if (uart_handle_break(port))
568 continue;
569 }
570 if (uart_handle_sysrq_char(port, rbr))
571 continue;
572
573 buf[i++] = rbr;
574 }
575 return i;
576}
577
578static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
579{
580 return ioread8(priv->membase + UART_IIR) &\
581 (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
582}
583
584static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
585{
586 return ioread8(priv->membase + UART_LSR);
587}
588
589static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
590{
591 unsigned int lcr;
592
593 lcr = ioread8(priv->membase + UART_LCR);
594 if (on)
595 lcr |= PCH_UART_LCR_SB;
596 else
597 lcr &= ~PCH_UART_LCR_SB;
598
599 iowrite8(lcr, priv->membase + UART_LCR);
600}
601
602static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
603 int size)
604{
605 struct uart_port *port = &priv->port;
606 struct tty_port *tport = &port->state->port;
607
608 tty_insert_flip_string(tport, buf, size);
609 tty_flip_buffer_push(tport);
610
611 return 0;
612}
613
614static int dma_push_rx(struct eg20t_port *priv, int size)
615{
616 int room;
617 struct uart_port *port = &priv->port;
618 struct tty_port *tport = &port->state->port;
619
620 room = tty_buffer_request_room(tport, size);
621
622 if (room < size)
623 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
624 size - room);
625 if (!room)
626 return 0;
627
628 tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size);
629
630 port->icount.rx += room;
631
632 return room;
633}
634
635static void pch_free_dma(struct uart_port *port)
636{
637 struct eg20t_port *priv;
638 priv = container_of(port, struct eg20t_port, port);
639
640 if (priv->chan_tx) {
641 dma_release_channel(priv->chan_tx);
642 priv->chan_tx = NULL;
643 }
644 if (priv->chan_rx) {
645 dma_release_channel(priv->chan_rx);
646 priv->chan_rx = NULL;
647 }
648
649 if (priv->rx_buf_dma) {
650 dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
651 priv->rx_buf_dma);
652 priv->rx_buf_virt = NULL;
653 priv->rx_buf_dma = 0;
654 }
655
656 return;
657}
658
659static bool filter(struct dma_chan *chan, void *slave)
660{
661 struct pch_dma_slave *param = slave;
662
663 if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
664 chan->device->dev)) {
665 chan->private = param;
666 return true;
667 } else {
668 return false;
669 }
670}
671
672static void pch_request_dma(struct uart_port *port)
673{
674 dma_cap_mask_t mask;
675 struct dma_chan *chan;
676 struct pci_dev *dma_dev;
677 struct pch_dma_slave *param;
678 struct eg20t_port *priv =
679 container_of(port, struct eg20t_port, port);
680 dma_cap_zero(mask);
681 dma_cap_set(DMA_SLAVE, mask);
682
683 /* Get DMA's dev information */
684 dma_dev = pci_get_slot(priv->pdev->bus,
685 PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0));
686
687 /* Set Tx DMA */
688 param = &priv->param_tx;
689 param->dma_dev = &dma_dev->dev;
690 param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
691
692 param->tx_reg = port->mapbase + UART_TX;
693 chan = dma_request_channel(mask, filter, param);
694 if (!chan) {
695 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
696 __func__);
697 pci_dev_put(dma_dev);
698 return;
699 }
700 priv->chan_tx = chan;
701
702 /* Set Rx DMA */
703 param = &priv->param_rx;
704 param->dma_dev = &dma_dev->dev;
705 param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
706
707 param->rx_reg = port->mapbase + UART_RX;
708 chan = dma_request_channel(mask, filter, param);
709 if (!chan) {
710 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
711 __func__);
712 dma_release_channel(priv->chan_tx);
713 priv->chan_tx = NULL;
714 pci_dev_put(dma_dev);
715 return;
716 }
717
718 /* Get Consistent memory for DMA */
719 priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
720 &priv->rx_buf_dma, GFP_KERNEL);
721 priv->chan_rx = chan;
722
723 pci_dev_put(dma_dev);
724}
725
726static void pch_dma_rx_complete(void *arg)
727{
728 struct eg20t_port *priv = arg;
729 struct uart_port *port = &priv->port;
730 int count;
731
732 dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
733 count = dma_push_rx(priv, priv->trigger_level);
734 if (count)
735 tty_flip_buffer_push(&port->state->port);
736 async_tx_ack(priv->desc_rx);
737 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
738 PCH_UART_HAL_RX_ERR_INT);
739}
740
741static void pch_dma_tx_complete(void *arg)
742{
743 struct eg20t_port *priv = arg;
744 struct uart_port *port = &priv->port;
745 struct scatterlist *sg = priv->sg_tx_p;
746 int i;
747
748 for (i = 0; i < priv->nent; i++, sg++)
749 uart_xmit_advance(port, sg_dma_len(sg));
750
751 async_tx_ack(priv->desc_tx);
752 dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE);
753 priv->tx_dma_use = 0;
754 priv->nent = 0;
755 priv->orig_nent = 0;
756 kfree(priv->sg_tx_p);
757 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
758}
759
760static int handle_rx_to(struct eg20t_port *priv)
761{
762 struct pch_uart_buffer *buf;
763 int rx_size;
764 int ret;
765 if (!priv->start_rx) {
766 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
767 PCH_UART_HAL_RX_ERR_INT);
768 return 0;
769 }
770 buf = &priv->rxbuf;
771 do {
772 rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
773 ret = push_rx(priv, buf->buf, rx_size);
774 if (ret)
775 return 0;
776 } while (rx_size == buf->size);
777
778 return PCH_UART_HANDLED_RX_INT;
779}
780
781static int handle_rx(struct eg20t_port *priv)
782{
783 return handle_rx_to(priv);
784}
785
786static int dma_handle_rx(struct eg20t_port *priv)
787{
788 struct uart_port *port = &priv->port;
789 struct dma_async_tx_descriptor *desc;
790 struct scatterlist *sg;
791
792 priv = container_of(port, struct eg20t_port, port);
793 sg = &priv->sg_rx;
794
795 sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
796
797 sg_dma_len(sg) = priv->trigger_level;
798
799 sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
800 sg_dma_len(sg), offset_in_page(priv->rx_buf_virt));
801
802 sg_dma_address(sg) = priv->rx_buf_dma;
803
804 desc = dmaengine_prep_slave_sg(priv->chan_rx,
805 sg, 1, DMA_DEV_TO_MEM,
806 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
807
808 if (!desc)
809 return 0;
810
811 priv->desc_rx = desc;
812 desc->callback = pch_dma_rx_complete;
813 desc->callback_param = priv;
814 desc->tx_submit(desc);
815 dma_async_issue_pending(priv->chan_rx);
816
817 return PCH_UART_HANDLED_RX_INT;
818}
819
820static unsigned int handle_tx(struct eg20t_port *priv)
821{
822 struct uart_port *port = &priv->port;
823 struct circ_buf *xmit = &port->state->xmit;
824 int fifo_size;
825 int tx_empty;
826
827 if (!priv->start_tx) {
828 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
829 __func__, jiffies);
830 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
831 priv->tx_empty = 1;
832 return 0;
833 }
834
835 fifo_size = max(priv->fifo_size, 1);
836 tx_empty = 1;
837 if (port->x_char) {
838 iowrite8(port->x_char, priv->membase + PCH_UART_THR);
839 port->icount.tx++;
840 port->x_char = 0;
841 tx_empty = 0;
842 fifo_size--;
843 }
844
845 while (!uart_tx_stopped(port) && !uart_circ_empty(xmit) && fifo_size) {
846 iowrite8(xmit->buf[xmit->tail], priv->membase + PCH_UART_THR);
847 uart_xmit_advance(port, 1);
848 fifo_size--;
849 tx_empty = 0;
850 }
851
852 priv->tx_empty = tx_empty;
853
854 if (tx_empty) {
855 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
856 uart_write_wakeup(port);
857 }
858
859 return PCH_UART_HANDLED_TX_INT;
860}
861
862static unsigned int dma_handle_tx(struct eg20t_port *priv)
863{
864 struct uart_port *port = &priv->port;
865 struct circ_buf *xmit = &port->state->xmit;
866 struct scatterlist *sg;
867 int nent;
868 int fifo_size;
869 struct dma_async_tx_descriptor *desc;
870 int num;
871 int i;
872 int bytes;
873 int size;
874 int rem;
875
876 if (!priv->start_tx) {
877 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
878 __func__, jiffies);
879 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
880 priv->tx_empty = 1;
881 return 0;
882 }
883
884 if (priv->tx_dma_use) {
885 dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
886 __func__, jiffies);
887 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
888 priv->tx_empty = 1;
889 return 0;
890 }
891
892 fifo_size = max(priv->fifo_size, 1);
893
894 if (port->x_char) {
895 iowrite8(port->x_char, priv->membase + PCH_UART_THR);
896 port->icount.tx++;
897 port->x_char = 0;
898 fifo_size--;
899 }
900
901 bytes = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
902 if (!bytes) {
903 dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
904 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
905 uart_write_wakeup(port);
906 return 0;
907 }
908
909 if (bytes > fifo_size) {
910 num = bytes / fifo_size + 1;
911 size = fifo_size;
912 rem = bytes % fifo_size;
913 } else {
914 num = 1;
915 size = bytes;
916 rem = bytes;
917 }
918
919 dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
920 __func__, num, size, rem);
921
922 priv->tx_dma_use = 1;
923
924 priv->sg_tx_p = kmalloc_array(num, sizeof(struct scatterlist), GFP_ATOMIC);
925 if (!priv->sg_tx_p) {
926 dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
927 return 0;
928 }
929
930 sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
931 sg = priv->sg_tx_p;
932
933 for (i = 0; i < num; i++, sg++) {
934 if (i == (num - 1))
935 sg_set_page(sg, virt_to_page(xmit->buf),
936 rem, fifo_size * i);
937 else
938 sg_set_page(sg, virt_to_page(xmit->buf),
939 size, fifo_size * i);
940 }
941
942 sg = priv->sg_tx_p;
943 nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
944 if (!nent) {
945 dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
946 return 0;
947 }
948 priv->orig_nent = num;
949 priv->nent = nent;
950
951 for (i = 0; i < nent; i++, sg++) {
952 sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
953 fifo_size * i;
954 sg_dma_address(sg) = (sg_dma_address(sg) &
955 ~(UART_XMIT_SIZE - 1)) + sg->offset;
956 if (i == (nent - 1))
957 sg_dma_len(sg) = rem;
958 else
959 sg_dma_len(sg) = size;
960 }
961
962 desc = dmaengine_prep_slave_sg(priv->chan_tx,
963 priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
964 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
965 if (!desc) {
966 dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n",
967 __func__);
968 return 0;
969 }
970 dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
971 priv->desc_tx = desc;
972 desc->callback = pch_dma_tx_complete;
973 desc->callback_param = priv;
974
975 desc->tx_submit(desc);
976
977 dma_async_issue_pending(priv->chan_tx);
978
979 return PCH_UART_HANDLED_TX_INT;
980}
981
982static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
983{
984 struct uart_port *port = &priv->port;
985 struct tty_struct *tty = tty_port_tty_get(&port->state->port);
986 char *error_msg[5] = {};
987 int i = 0;
988
989 if (lsr & PCH_UART_LSR_ERR)
990 error_msg[i++] = "Error data in FIFO\n";
991
992 if (lsr & UART_LSR_FE) {
993 port->icount.frame++;
994 error_msg[i++] = " Framing Error\n";
995 }
996
997 if (lsr & UART_LSR_PE) {
998 port->icount.parity++;
999 error_msg[i++] = " Parity Error\n";
1000 }
1001
1002 if (lsr & UART_LSR_OE) {
1003 port->icount.overrun++;
1004 error_msg[i++] = " Overrun Error\n";
1005 }
1006
1007 if (tty == NULL) {
1008 for (i = 0; error_msg[i] != NULL; i++)
1009 dev_err(&priv->pdev->dev, error_msg[i]);
1010 } else {
1011 tty_kref_put(tty);
1012 }
1013}
1014
1015static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
1016{
1017 struct eg20t_port *priv = dev_id;
1018 unsigned int handled;
1019 u8 lsr;
1020 int ret = 0;
1021 unsigned char iid;
1022 unsigned long flags;
1023 int next = 1;
1024 u8 msr;
1025
1026 spin_lock_irqsave(&priv->lock, flags);
1027 handled = 0;
1028 while (next) {
1029 iid = pch_uart_hal_get_iid(priv);
1030 if (iid & PCH_UART_IIR_IP) /* No Interrupt */
1031 break;
1032 switch (iid) {
1033 case PCH_UART_IID_RLS: /* Receiver Line Status */
1034 lsr = pch_uart_hal_get_line_status(priv);
1035 if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
1036 UART_LSR_PE | UART_LSR_OE)) {
1037 pch_uart_err_ir(priv, lsr);
1038 ret = PCH_UART_HANDLED_RX_ERR_INT;
1039 } else {
1040 ret = PCH_UART_HANDLED_LS_INT;
1041 }
1042 break;
1043 case PCH_UART_IID_RDR: /* Received Data Ready */
1044 if (priv->use_dma) {
1045 pch_uart_hal_disable_interrupt(priv,
1046 PCH_UART_HAL_RX_INT |
1047 PCH_UART_HAL_RX_ERR_INT);
1048 ret = dma_handle_rx(priv);
1049 if (!ret)
1050 pch_uart_hal_enable_interrupt(priv,
1051 PCH_UART_HAL_RX_INT |
1052 PCH_UART_HAL_RX_ERR_INT);
1053 } else {
1054 ret = handle_rx(priv);
1055 }
1056 break;
1057 case PCH_UART_IID_RDR_TO: /* Received Data Ready
1058 (FIFO Timeout) */
1059 ret = handle_rx_to(priv);
1060 break;
1061 case PCH_UART_IID_THRE: /* Transmitter Holding Register
1062 Empty */
1063 if (priv->use_dma)
1064 ret = dma_handle_tx(priv);
1065 else
1066 ret = handle_tx(priv);
1067 break;
1068 case PCH_UART_IID_MS: /* Modem Status */
1069 msr = pch_uart_hal_get_modem(priv);
1070 next = 0; /* MS ir prioirty is the lowest. So, MS ir
1071 means final interrupt */
1072 if ((msr & UART_MSR_ANY_DELTA) == 0)
1073 break;
1074 ret |= PCH_UART_HANDLED_MS_INT;
1075 break;
1076 default: /* Never junp to this label */
1077 dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
1078 iid, jiffies);
1079 ret = -1;
1080 next = 0;
1081 break;
1082 }
1083 handled |= (unsigned int)ret;
1084 }
1085
1086 spin_unlock_irqrestore(&priv->lock, flags);
1087 return IRQ_RETVAL(handled);
1088}
1089
1090/* This function tests whether the transmitter fifo and shifter for the port
1091 described by 'port' is empty. */
1092static unsigned int pch_uart_tx_empty(struct uart_port *port)
1093{
1094 struct eg20t_port *priv;
1095
1096 priv = container_of(port, struct eg20t_port, port);
1097 if (priv->tx_empty)
1098 return TIOCSER_TEMT;
1099 else
1100 return 0;
1101}
1102
1103/* Returns the current state of modem control inputs. */
1104static unsigned int pch_uart_get_mctrl(struct uart_port *port)
1105{
1106 struct eg20t_port *priv;
1107 u8 modem;
1108 unsigned int ret = 0;
1109
1110 priv = container_of(port, struct eg20t_port, port);
1111 modem = pch_uart_hal_get_modem(priv);
1112
1113 if (modem & UART_MSR_DCD)
1114 ret |= TIOCM_CAR;
1115
1116 if (modem & UART_MSR_RI)
1117 ret |= TIOCM_RNG;
1118
1119 if (modem & UART_MSR_DSR)
1120 ret |= TIOCM_DSR;
1121
1122 if (modem & UART_MSR_CTS)
1123 ret |= TIOCM_CTS;
1124
1125 return ret;
1126}
1127
1128static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1129{
1130 u32 mcr = 0;
1131 struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
1132
1133 if (mctrl & TIOCM_DTR)
1134 mcr |= UART_MCR_DTR;
1135 if (mctrl & TIOCM_RTS)
1136 mcr |= UART_MCR_RTS;
1137 if (mctrl & TIOCM_LOOP)
1138 mcr |= UART_MCR_LOOP;
1139
1140 if (priv->mcr & UART_MCR_AFE)
1141 mcr |= UART_MCR_AFE;
1142
1143 if (mctrl)
1144 iowrite8(mcr, priv->membase + UART_MCR);
1145}
1146
1147static void pch_uart_stop_tx(struct uart_port *port)
1148{
1149 struct eg20t_port *priv;
1150 priv = container_of(port, struct eg20t_port, port);
1151 priv->start_tx = 0;
1152 priv->tx_dma_use = 0;
1153}
1154
1155static void pch_uart_start_tx(struct uart_port *port)
1156{
1157 struct eg20t_port *priv;
1158
1159 priv = container_of(port, struct eg20t_port, port);
1160
1161 if (priv->use_dma) {
1162 if (priv->tx_dma_use) {
1163 dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
1164 __func__);
1165 return;
1166 }
1167 }
1168
1169 priv->start_tx = 1;
1170 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
1171}
1172
1173static void pch_uart_stop_rx(struct uart_port *port)
1174{
1175 struct eg20t_port *priv;
1176 priv = container_of(port, struct eg20t_port, port);
1177 priv->start_rx = 0;
1178 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
1179 PCH_UART_HAL_RX_ERR_INT);
1180}
1181
1182/* Enable the modem status interrupts. */
1183static void pch_uart_enable_ms(struct uart_port *port)
1184{
1185 struct eg20t_port *priv;
1186 priv = container_of(port, struct eg20t_port, port);
1187 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
1188}
1189
1190/* Control the transmission of a break signal. */
1191static void pch_uart_break_ctl(struct uart_port *port, int ctl)
1192{
1193 struct eg20t_port *priv;
1194 unsigned long flags;
1195
1196 priv = container_of(port, struct eg20t_port, port);
1197 spin_lock_irqsave(&priv->lock, flags);
1198 pch_uart_hal_set_break(priv, ctl);
1199 spin_unlock_irqrestore(&priv->lock, flags);
1200}
1201
1202/* Grab any interrupt resources and initialise any low level driver state. */
1203static int pch_uart_startup(struct uart_port *port)
1204{
1205 struct eg20t_port *priv;
1206 int ret;
1207 int fifo_size;
1208 int trigger_level;
1209
1210 priv = container_of(port, struct eg20t_port, port);
1211 priv->tx_empty = 1;
1212
1213 if (port->uartclk)
1214 priv->uartclk = port->uartclk;
1215 else
1216 port->uartclk = priv->uartclk;
1217
1218 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1219 ret = pch_uart_hal_set_line(priv, default_baud,
1220 PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
1221 PCH_UART_HAL_STB1);
1222 if (ret)
1223 return ret;
1224
1225 switch (priv->fifo_size) {
1226 case 256:
1227 fifo_size = PCH_UART_HAL_FIFO256;
1228 break;
1229 case 64:
1230 fifo_size = PCH_UART_HAL_FIFO64;
1231 break;
1232 case 16:
1233 fifo_size = PCH_UART_HAL_FIFO16;
1234 break;
1235 case 1:
1236 default:
1237 fifo_size = PCH_UART_HAL_FIFO_DIS;
1238 break;
1239 }
1240
1241 switch (priv->trigger) {
1242 case PCH_UART_HAL_TRIGGER1:
1243 trigger_level = 1;
1244 break;
1245 case PCH_UART_HAL_TRIGGER_L:
1246 trigger_level = priv->fifo_size / 4;
1247 break;
1248 case PCH_UART_HAL_TRIGGER_M:
1249 trigger_level = priv->fifo_size / 2;
1250 break;
1251 case PCH_UART_HAL_TRIGGER_H:
1252 default:
1253 trigger_level = priv->fifo_size - (priv->fifo_size / 8);
1254 break;
1255 }
1256
1257 priv->trigger_level = trigger_level;
1258 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1259 fifo_size, priv->trigger);
1260 if (ret < 0)
1261 return ret;
1262
1263 ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
1264 priv->irq_name, priv);
1265 if (ret < 0)
1266 return ret;
1267
1268 if (priv->use_dma)
1269 pch_request_dma(port);
1270
1271 priv->start_rx = 1;
1272 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
1273 PCH_UART_HAL_RX_ERR_INT);
1274 uart_update_timeout(port, CS8, default_baud);
1275
1276 return 0;
1277}
1278
1279static void pch_uart_shutdown(struct uart_port *port)
1280{
1281 struct eg20t_port *priv;
1282 int ret;
1283
1284 priv = container_of(port, struct eg20t_port, port);
1285 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1286 pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
1287 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1288 PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
1289 if (ret)
1290 dev_err(priv->port.dev,
1291 "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
1292
1293 pch_free_dma(port);
1294
1295 free_irq(priv->port.irq, priv);
1296}
1297
1298/* Change the port parameters, including word length, parity, stop
1299 *bits. Update read_status_mask and ignore_status_mask to indicate
1300 *the types of events we are interested in receiving. */
1301static void pch_uart_set_termios(struct uart_port *port,
1302 struct ktermios *termios,
1303 const struct ktermios *old)
1304{
1305 int rtn;
1306 unsigned int baud, parity, bits, stb;
1307 struct eg20t_port *priv;
1308 unsigned long flags;
1309
1310 priv = container_of(port, struct eg20t_port, port);
1311 switch (termios->c_cflag & CSIZE) {
1312 case CS5:
1313 bits = PCH_UART_HAL_5BIT;
1314 break;
1315 case CS6:
1316 bits = PCH_UART_HAL_6BIT;
1317 break;
1318 case CS7:
1319 bits = PCH_UART_HAL_7BIT;
1320 break;
1321 default: /* CS8 */
1322 bits = PCH_UART_HAL_8BIT;
1323 break;
1324 }
1325 if (termios->c_cflag & CSTOPB)
1326 stb = PCH_UART_HAL_STB2;
1327 else
1328 stb = PCH_UART_HAL_STB1;
1329
1330 if (termios->c_cflag & PARENB) {
1331 if (termios->c_cflag & PARODD)
1332 parity = PCH_UART_HAL_PARITY_ODD;
1333 else
1334 parity = PCH_UART_HAL_PARITY_EVEN;
1335
1336 } else
1337 parity = PCH_UART_HAL_PARITY_NONE;
1338
1339 /* Only UART0 has auto hardware flow function */
1340 if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
1341 priv->mcr |= UART_MCR_AFE;
1342 else
1343 priv->mcr &= ~UART_MCR_AFE;
1344
1345 termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
1346
1347 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1348
1349 spin_lock_irqsave(&priv->lock, flags);
1350 uart_port_lock(port);
1351
1352 uart_update_timeout(port, termios->c_cflag, baud);
1353 rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
1354 if (rtn)
1355 goto out;
1356
1357 pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
1358 /* Don't rewrite B0 */
1359 if (tty_termios_baud_rate(termios))
1360 tty_termios_encode_baud_rate(termios, baud, baud);
1361
1362out:
1363 uart_port_unlock(port);
1364 spin_unlock_irqrestore(&priv->lock, flags);
1365}
1366
1367static const char *pch_uart_type(struct uart_port *port)
1368{
1369 return KBUILD_MODNAME;
1370}
1371
1372static void pch_uart_release_port(struct uart_port *port)
1373{
1374 struct eg20t_port *priv;
1375
1376 priv = container_of(port, struct eg20t_port, port);
1377 pci_iounmap(priv->pdev, priv->membase);
1378 pci_release_regions(priv->pdev);
1379}
1380
1381static int pch_uart_request_port(struct uart_port *port)
1382{
1383 struct eg20t_port *priv;
1384 int ret;
1385 void __iomem *membase;
1386
1387 priv = container_of(port, struct eg20t_port, port);
1388 ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
1389 if (ret < 0)
1390 return -EBUSY;
1391
1392 membase = pci_iomap(priv->pdev, 1, 0);
1393 if (!membase) {
1394 pci_release_regions(priv->pdev);
1395 return -EBUSY;
1396 }
1397 priv->membase = port->membase = membase;
1398
1399 return 0;
1400}
1401
1402static void pch_uart_config_port(struct uart_port *port, int type)
1403{
1404 struct eg20t_port *priv;
1405
1406 priv = container_of(port, struct eg20t_port, port);
1407 if (type & UART_CONFIG_TYPE) {
1408 port->type = priv->port_type;
1409 pch_uart_request_port(port);
1410 }
1411}
1412
1413static int pch_uart_verify_port(struct uart_port *port,
1414 struct serial_struct *serinfo)
1415{
1416 struct eg20t_port *priv;
1417
1418 priv = container_of(port, struct eg20t_port, port);
1419 if (serinfo->flags & UPF_LOW_LATENCY) {
1420 dev_info(priv->port.dev,
1421 "PCH UART : Use PIO Mode (without DMA)\n");
1422 priv->use_dma = 0;
1423 serinfo->flags &= ~UPF_LOW_LATENCY;
1424 } else {
1425#ifndef CONFIG_PCH_DMA
1426 dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
1427 __func__);
1428 return -EOPNOTSUPP;
1429#endif
1430 if (!priv->use_dma) {
1431 pch_request_dma(port);
1432 if (priv->chan_rx)
1433 priv->use_dma = 1;
1434 }
1435 dev_info(priv->port.dev, "PCH UART: %s\n",
1436 priv->use_dma ?
1437 "Use DMA Mode" : "No DMA");
1438 }
1439
1440 return 0;
1441}
1442
1443#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE)
1444/*
1445 * Wait for transmitter & holding register to empty
1446 */
1447static void wait_for_xmitr(struct eg20t_port *up, int bits)
1448{
1449 unsigned int status, tmout = 10000;
1450
1451 /* Wait up to 10ms for the character(s) to be sent. */
1452 for (;;) {
1453 status = ioread8(up->membase + UART_LSR);
1454
1455 if ((status & bits) == bits)
1456 break;
1457 if (--tmout == 0)
1458 break;
1459 udelay(1);
1460 }
1461
1462 /* Wait up to 1s for flow control if necessary */
1463 if (up->port.flags & UPF_CONS_FLOW) {
1464 unsigned int tmout;
1465 for (tmout = 1000000; tmout; tmout--) {
1466 unsigned int msr = ioread8(up->membase + UART_MSR);
1467 if (msr & UART_MSR_CTS)
1468 break;
1469 udelay(1);
1470 touch_nmi_watchdog();
1471 }
1472 }
1473}
1474#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */
1475
1476#ifdef CONFIG_CONSOLE_POLL
1477/*
1478 * Console polling routines for communicate via uart while
1479 * in an interrupt or debug context.
1480 */
1481static int pch_uart_get_poll_char(struct uart_port *port)
1482{
1483 struct eg20t_port *priv =
1484 container_of(port, struct eg20t_port, port);
1485 u8 lsr = ioread8(priv->membase + UART_LSR);
1486
1487 if (!(lsr & UART_LSR_DR))
1488 return NO_POLL_CHAR;
1489
1490 return ioread8(priv->membase + PCH_UART_RBR);
1491}
1492
1493
1494static void pch_uart_put_poll_char(struct uart_port *port,
1495 unsigned char c)
1496{
1497 unsigned int ier;
1498 struct eg20t_port *priv =
1499 container_of(port, struct eg20t_port, port);
1500
1501 /*
1502 * First save the IER then disable the interrupts
1503 */
1504 ier = ioread8(priv->membase + UART_IER);
1505 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1506
1507 wait_for_xmitr(priv, UART_LSR_THRE);
1508 /*
1509 * Send the character out.
1510 */
1511 iowrite8(c, priv->membase + PCH_UART_THR);
1512
1513 /*
1514 * Finally, wait for transmitter to become empty
1515 * and restore the IER
1516 */
1517 wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
1518 iowrite8(ier, priv->membase + UART_IER);
1519}
1520#endif /* CONFIG_CONSOLE_POLL */
1521
1522static const struct uart_ops pch_uart_ops = {
1523 .tx_empty = pch_uart_tx_empty,
1524 .set_mctrl = pch_uart_set_mctrl,
1525 .get_mctrl = pch_uart_get_mctrl,
1526 .stop_tx = pch_uart_stop_tx,
1527 .start_tx = pch_uart_start_tx,
1528 .stop_rx = pch_uart_stop_rx,
1529 .enable_ms = pch_uart_enable_ms,
1530 .break_ctl = pch_uart_break_ctl,
1531 .startup = pch_uart_startup,
1532 .shutdown = pch_uart_shutdown,
1533 .set_termios = pch_uart_set_termios,
1534/* .pm = pch_uart_pm, Not supported yet */
1535 .type = pch_uart_type,
1536 .release_port = pch_uart_release_port,
1537 .request_port = pch_uart_request_port,
1538 .config_port = pch_uart_config_port,
1539 .verify_port = pch_uart_verify_port,
1540#ifdef CONFIG_CONSOLE_POLL
1541 .poll_get_char = pch_uart_get_poll_char,
1542 .poll_put_char = pch_uart_put_poll_char,
1543#endif
1544};
1545
1546#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1547
1548static void pch_console_putchar(struct uart_port *port, unsigned char ch)
1549{
1550 struct eg20t_port *priv =
1551 container_of(port, struct eg20t_port, port);
1552
1553 wait_for_xmitr(priv, UART_LSR_THRE);
1554 iowrite8(ch, priv->membase + PCH_UART_THR);
1555}
1556
1557/*
1558 * Print a string to the serial port trying not to disturb
1559 * any possible real use of the port...
1560 *
1561 * The console_lock must be held when we get here.
1562 */
1563static void
1564pch_console_write(struct console *co, const char *s, unsigned int count)
1565{
1566 struct eg20t_port *priv;
1567 unsigned long flags;
1568 int priv_locked = 1;
1569 int port_locked = 1;
1570 u8 ier;
1571
1572 priv = pch_uart_ports[co->index];
1573
1574 touch_nmi_watchdog();
1575
1576 local_irq_save(flags);
1577 if (priv->port.sysrq) {
1578 /* call to uart_handle_sysrq_char already took the priv lock */
1579 priv_locked = 0;
1580 /* serial8250_handle_port() already took the port lock */
1581 port_locked = 0;
1582 } else if (oops_in_progress) {
1583 priv_locked = spin_trylock(&priv->lock);
1584 port_locked = uart_port_trylock(&priv->port);
1585 } else {
1586 spin_lock(&priv->lock);
1587 uart_port_lock(&priv->port);
1588 }
1589
1590 /*
1591 * First save the IER then disable the interrupts
1592 */
1593 ier = ioread8(priv->membase + UART_IER);
1594
1595 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1596
1597 uart_console_write(&priv->port, s, count, pch_console_putchar);
1598
1599 /*
1600 * Finally, wait for transmitter to become empty
1601 * and restore the IER
1602 */
1603 wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
1604 iowrite8(ier, priv->membase + UART_IER);
1605
1606 if (port_locked)
1607 uart_port_unlock(&priv->port);
1608 if (priv_locked)
1609 spin_unlock(&priv->lock);
1610 local_irq_restore(flags);
1611}
1612
1613static int __init pch_console_setup(struct console *co, char *options)
1614{
1615 struct uart_port *port;
1616 int baud = default_baud;
1617 int bits = 8;
1618 int parity = 'n';
1619 int flow = 'n';
1620
1621 /*
1622 * Check whether an invalid uart number has been specified, and
1623 * if so, search for the first available port that does have
1624 * console support.
1625 */
1626 if (co->index >= PCH_UART_NR)
1627 co->index = 0;
1628 port = &pch_uart_ports[co->index]->port;
1629
1630 if (!port || (!port->iobase && !port->membase))
1631 return -ENODEV;
1632
1633 port->uartclk = pch_uart_get_uartclk();
1634
1635 if (options)
1636 uart_parse_options(options, &baud, &parity, &bits, &flow);
1637
1638 return uart_set_options(port, co, baud, parity, bits, flow);
1639}
1640
1641static struct uart_driver pch_uart_driver;
1642
1643static struct console pch_console = {
1644 .name = PCH_UART_DRIVER_DEVICE,
1645 .write = pch_console_write,
1646 .device = uart_console_device,
1647 .setup = pch_console_setup,
1648 .flags = CON_PRINTBUFFER | CON_ANYTIME,
1649 .index = -1,
1650 .data = &pch_uart_driver,
1651};
1652
1653#define PCH_CONSOLE (&pch_console)
1654#else
1655#define PCH_CONSOLE NULL
1656#endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */
1657
1658static struct uart_driver pch_uart_driver = {
1659 .owner = THIS_MODULE,
1660 .driver_name = KBUILD_MODNAME,
1661 .dev_name = PCH_UART_DRIVER_DEVICE,
1662 .major = 0,
1663 .minor = 0,
1664 .nr = PCH_UART_NR,
1665 .cons = PCH_CONSOLE,
1666};
1667
1668static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
1669 const struct pci_device_id *id)
1670{
1671 struct eg20t_port *priv;
1672 int ret;
1673 unsigned int iobase;
1674 unsigned int mapbase;
1675 unsigned char *rxbuf;
1676 int fifosize;
1677 int port_type;
1678 struct pch_uart_driver_data *board;
1679 char name[32];
1680
1681 board = &drv_dat[id->driver_data];
1682 port_type = board->port_type;
1683
1684 priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
1685 if (priv == NULL)
1686 goto init_port_alloc_err;
1687
1688 rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
1689 if (!rxbuf)
1690 goto init_port_free_txbuf;
1691
1692 switch (port_type) {
1693 case PORT_PCH_8LINE:
1694 fifosize = 256; /* EG20T/ML7213: UART0 */
1695 break;
1696 case PORT_PCH_2LINE:
1697 fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
1698 break;
1699 default:
1700 dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
1701 goto init_port_hal_free;
1702 }
1703
1704 pci_enable_msi(pdev);
1705 pci_set_master(pdev);
1706
1707 spin_lock_init(&priv->lock);
1708
1709 iobase = pci_resource_start(pdev, 0);
1710 mapbase = pci_resource_start(pdev, 1);
1711 priv->mapbase = mapbase;
1712 priv->iobase = iobase;
1713 priv->pdev = pdev;
1714 priv->tx_empty = 1;
1715 priv->rxbuf.buf = rxbuf;
1716 priv->rxbuf.size = PAGE_SIZE;
1717
1718 priv->fifo_size = fifosize;
1719 priv->uartclk = pch_uart_get_uartclk();
1720 priv->port_type = port_type;
1721 priv->port.dev = &pdev->dev;
1722 priv->port.iobase = iobase;
1723 priv->port.membase = NULL;
1724 priv->port.mapbase = mapbase;
1725 priv->port.irq = pdev->irq;
1726 priv->port.iotype = UPIO_PORT;
1727 priv->port.ops = &pch_uart_ops;
1728 priv->port.flags = UPF_BOOT_AUTOCONF;
1729 priv->port.fifosize = fifosize;
1730 priv->port.line = board->line_no;
1731 priv->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PCH_UART_CONSOLE);
1732 priv->trigger = PCH_UART_HAL_TRIGGER_M;
1733
1734 snprintf(priv->irq_name, IRQ_NAME_SIZE,
1735 KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
1736 priv->port.line);
1737
1738 spin_lock_init(&priv->port.lock);
1739
1740 pci_set_drvdata(pdev, priv);
1741 priv->trigger_level = 1;
1742 priv->fcr = 0;
1743
1744 if (pdev->dev.of_node)
1745 of_property_read_u32(pdev->dev.of_node, "clock-frequency"
1746 , &user_uartclk);
1747
1748#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1749 pch_uart_ports[board->line_no] = priv;
1750#endif
1751 ret = uart_add_one_port(&pch_uart_driver, &priv->port);
1752 if (ret < 0)
1753 goto init_port_hal_free;
1754
1755 snprintf(name, sizeof(name), "uart%d_regs", priv->port.line);
1756 debugfs_create_file(name, S_IFREG | S_IRUGO, NULL, priv,
1757 &port_regs_ops);
1758
1759 return priv;
1760
1761init_port_hal_free:
1762#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1763 pch_uart_ports[board->line_no] = NULL;
1764#endif
1765 free_page((unsigned long)rxbuf);
1766init_port_free_txbuf:
1767 kfree(priv);
1768init_port_alloc_err:
1769
1770 return NULL;
1771}
1772
1773static void pch_uart_exit_port(struct eg20t_port *priv)
1774{
1775 char name[32];
1776
1777 snprintf(name, sizeof(name), "uart%d_regs", priv->port.line);
1778 debugfs_lookup_and_remove(name, NULL);
1779 uart_remove_one_port(&pch_uart_driver, &priv->port);
1780 free_page((unsigned long)priv->rxbuf.buf);
1781}
1782
1783static void pch_uart_pci_remove(struct pci_dev *pdev)
1784{
1785 struct eg20t_port *priv = pci_get_drvdata(pdev);
1786
1787 pci_disable_msi(pdev);
1788
1789#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1790 pch_uart_ports[priv->port.line] = NULL;
1791#endif
1792 pch_uart_exit_port(priv);
1793 pci_disable_device(pdev);
1794 kfree(priv);
1795 return;
1796}
1797
1798static int __maybe_unused pch_uart_pci_suspend(struct device *dev)
1799{
1800 struct eg20t_port *priv = dev_get_drvdata(dev);
1801
1802 uart_suspend_port(&pch_uart_driver, &priv->port);
1803
1804 return 0;
1805}
1806
1807static int __maybe_unused pch_uart_pci_resume(struct device *dev)
1808{
1809 struct eg20t_port *priv = dev_get_drvdata(dev);
1810
1811 uart_resume_port(&pch_uart_driver, &priv->port);
1812
1813 return 0;
1814}
1815
1816static const struct pci_device_id pch_uart_pci_id[] = {
1817 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
1818 .driver_data = pch_et20t_uart0},
1819 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
1820 .driver_data = pch_et20t_uart1},
1821 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
1822 .driver_data = pch_et20t_uart2},
1823 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
1824 .driver_data = pch_et20t_uart3},
1825 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
1826 .driver_data = pch_ml7213_uart0},
1827 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
1828 .driver_data = pch_ml7213_uart1},
1829 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
1830 .driver_data = pch_ml7213_uart2},
1831 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
1832 .driver_data = pch_ml7223_uart0},
1833 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
1834 .driver_data = pch_ml7223_uart1},
1835 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
1836 .driver_data = pch_ml7831_uart0},
1837 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
1838 .driver_data = pch_ml7831_uart1},
1839 {0,},
1840};
1841
1842static int pch_uart_pci_probe(struct pci_dev *pdev,
1843 const struct pci_device_id *id)
1844{
1845 int ret;
1846 struct eg20t_port *priv;
1847
1848 ret = pci_enable_device(pdev);
1849 if (ret < 0)
1850 goto probe_error;
1851
1852 priv = pch_uart_init_port(pdev, id);
1853 if (!priv) {
1854 ret = -EBUSY;
1855 goto probe_disable_device;
1856 }
1857 pci_set_drvdata(pdev, priv);
1858
1859 return ret;
1860
1861probe_disable_device:
1862 pci_disable_msi(pdev);
1863 pci_disable_device(pdev);
1864probe_error:
1865 return ret;
1866}
1867
1868static SIMPLE_DEV_PM_OPS(pch_uart_pci_pm_ops,
1869 pch_uart_pci_suspend,
1870 pch_uart_pci_resume);
1871
1872static struct pci_driver pch_uart_pci_driver = {
1873 .name = "pch_uart",
1874 .id_table = pch_uart_pci_id,
1875 .probe = pch_uart_pci_probe,
1876 .remove = pch_uart_pci_remove,
1877 .driver.pm = &pch_uart_pci_pm_ops,
1878};
1879
1880static int __init pch_uart_module_init(void)
1881{
1882 int ret;
1883
1884 /* register as UART driver */
1885 ret = uart_register_driver(&pch_uart_driver);
1886 if (ret < 0)
1887 return ret;
1888
1889 /* register as PCI driver */
1890 ret = pci_register_driver(&pch_uart_pci_driver);
1891 if (ret < 0)
1892 uart_unregister_driver(&pch_uart_driver);
1893
1894 return ret;
1895}
1896module_init(pch_uart_module_init);
1897
1898static void __exit pch_uart_module_exit(void)
1899{
1900 pci_unregister_driver(&pch_uart_pci_driver);
1901 uart_unregister_driver(&pch_uart_driver);
1902}
1903module_exit(pch_uart_module_exit);
1904
1905MODULE_LICENSE("GPL v2");
1906MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
1907MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
1908
1909module_param(default_baud, uint, S_IRUGO);
1910MODULE_PARM_DESC(default_baud,
1911 "Default BAUD for initial driver state and console (default 9600)");
1912module_param(user_uartclk, uint, S_IRUGO);
1913MODULE_PARM_DESC(user_uartclk,
1914 "Override UART default or board specific UART clock");
1/*
2 *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
3 *
4 *This program is free software; you can redistribute it and/or modify
5 *it under the terms of the GNU General Public License as published by
6 *the Free Software Foundation; version 2 of the License.
7 *
8 *This program is distributed in the hope that it will be useful,
9 *but WITHOUT ANY WARRANTY; without even the implied warranty of
10 *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 *GNU General Public License for more details.
12 *
13 *You should have received a copy of the GNU General Public License
14 *along with this program; if not, write to the Free Software
15 *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
16 */
17#if defined(CONFIG_SERIAL_PCH_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
18#define SUPPORT_SYSRQ
19#endif
20#include <linux/kernel.h>
21#include <linux/serial_reg.h>
22#include <linux/slab.h>
23#include <linux/module.h>
24#include <linux/pci.h>
25#include <linux/console.h>
26#include <linux/serial_core.h>
27#include <linux/tty.h>
28#include <linux/tty_flip.h>
29#include <linux/interrupt.h>
30#include <linux/io.h>
31#include <linux/dmi.h>
32#include <linux/nmi.h>
33#include <linux/delay.h>
34
35#include <linux/debugfs.h>
36#include <linux/dmaengine.h>
37#include <linux/pch_dma.h>
38
39enum {
40 PCH_UART_HANDLED_RX_INT_SHIFT,
41 PCH_UART_HANDLED_TX_INT_SHIFT,
42 PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
43 PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
44 PCH_UART_HANDLED_MS_INT_SHIFT,
45 PCH_UART_HANDLED_LS_INT_SHIFT,
46};
47
48enum {
49 PCH_UART_8LINE,
50 PCH_UART_2LINE,
51};
52
53#define PCH_UART_DRIVER_DEVICE "ttyPCH"
54
55/* Set the max number of UART port
56 * Intel EG20T PCH: 4 port
57 * LAPIS Semiconductor ML7213 IOH: 3 port
58 * LAPIS Semiconductor ML7223 IOH: 2 port
59*/
60#define PCH_UART_NR 4
61
62#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
63#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
64#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\
65 PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
66#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\
67 PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
68#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
69
70#define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
71
72#define PCH_UART_RBR 0x00
73#define PCH_UART_THR 0x00
74
75#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
76 PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
77#define PCH_UART_IER_ERBFI 0x00000001
78#define PCH_UART_IER_ETBEI 0x00000002
79#define PCH_UART_IER_ELSI 0x00000004
80#define PCH_UART_IER_EDSSI 0x00000008
81
82#define PCH_UART_IIR_IP 0x00000001
83#define PCH_UART_IIR_IID 0x00000006
84#define PCH_UART_IIR_MSI 0x00000000
85#define PCH_UART_IIR_TRI 0x00000002
86#define PCH_UART_IIR_RRI 0x00000004
87#define PCH_UART_IIR_REI 0x00000006
88#define PCH_UART_IIR_TOI 0x00000008
89#define PCH_UART_IIR_FIFO256 0x00000020
90#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256
91#define PCH_UART_IIR_FE 0x000000C0
92
93#define PCH_UART_FCR_FIFOE 0x00000001
94#define PCH_UART_FCR_RFR 0x00000002
95#define PCH_UART_FCR_TFR 0x00000004
96#define PCH_UART_FCR_DMS 0x00000008
97#define PCH_UART_FCR_FIFO256 0x00000020
98#define PCH_UART_FCR_RFTL 0x000000C0
99
100#define PCH_UART_FCR_RFTL1 0x00000000
101#define PCH_UART_FCR_RFTL64 0x00000040
102#define PCH_UART_FCR_RFTL128 0x00000080
103#define PCH_UART_FCR_RFTL224 0x000000C0
104#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64
105#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128
106#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224
107#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64
108#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128
109#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224
110#define PCH_UART_FCR_RFTL_SHIFT 6
111
112#define PCH_UART_LCR_WLS 0x00000003
113#define PCH_UART_LCR_STB 0x00000004
114#define PCH_UART_LCR_PEN 0x00000008
115#define PCH_UART_LCR_EPS 0x00000010
116#define PCH_UART_LCR_SP 0x00000020
117#define PCH_UART_LCR_SB 0x00000040
118#define PCH_UART_LCR_DLAB 0x00000080
119#define PCH_UART_LCR_NP 0x00000000
120#define PCH_UART_LCR_OP PCH_UART_LCR_PEN
121#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
122#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
123#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
124 PCH_UART_LCR_SP)
125
126#define PCH_UART_LCR_5BIT 0x00000000
127#define PCH_UART_LCR_6BIT 0x00000001
128#define PCH_UART_LCR_7BIT 0x00000002
129#define PCH_UART_LCR_8BIT 0x00000003
130
131#define PCH_UART_MCR_DTR 0x00000001
132#define PCH_UART_MCR_RTS 0x00000002
133#define PCH_UART_MCR_OUT 0x0000000C
134#define PCH_UART_MCR_LOOP 0x00000010
135#define PCH_UART_MCR_AFE 0x00000020
136
137#define PCH_UART_LSR_DR 0x00000001
138#define PCH_UART_LSR_ERR (1<<7)
139
140#define PCH_UART_MSR_DCTS 0x00000001
141#define PCH_UART_MSR_DDSR 0x00000002
142#define PCH_UART_MSR_TERI 0x00000004
143#define PCH_UART_MSR_DDCD 0x00000008
144#define PCH_UART_MSR_CTS 0x00000010
145#define PCH_UART_MSR_DSR 0x00000020
146#define PCH_UART_MSR_RI 0x00000040
147#define PCH_UART_MSR_DCD 0x00000080
148#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
149 PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
150
151#define PCH_UART_DLL 0x00
152#define PCH_UART_DLM 0x01
153
154#define PCH_UART_BRCSR 0x0E
155
156#define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
157#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
158#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
159#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI)
160#define PCH_UART_IID_MS (PCH_UART_IIR_MSI)
161
162#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP)
163#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP)
164#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP)
165#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P)
166#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P)
167#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT)
168#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT)
169#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT)
170#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT)
171#define PCH_UART_HAL_STB1 0
172#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB)
173
174#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR)
175#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR)
176#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \
177 PCH_UART_HAL_CLR_RX_FIFO)
178
179#define PCH_UART_HAL_DMA_MODE0 0
180#define PCH_UART_HAL_FIFO_DIS 0
181#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE)
182#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \
183 PCH_UART_FCR_FIFO256)
184#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256)
185#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1)
186#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64)
187#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128)
188#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224)
189#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16)
190#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32)
191#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56)
192#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4)
193#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8)
194#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14)
195#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64)
196#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128)
197#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224)
198
199#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI)
200#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI)
201#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI)
202#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI)
203#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK)
204
205#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR)
206#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS)
207#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT)
208#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
209#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
210
211#define PCI_VENDOR_ID_ROHM 0x10DB
212
213#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
214
215#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */
216#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
217#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
218#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
219#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
220#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */
221
222struct pch_uart_buffer {
223 unsigned char *buf;
224 int size;
225};
226
227struct eg20t_port {
228 struct uart_port port;
229 int port_type;
230 void __iomem *membase;
231 resource_size_t mapbase;
232 unsigned int iobase;
233 struct pci_dev *pdev;
234 int fifo_size;
235 unsigned int uartclk;
236 int start_tx;
237 int start_rx;
238 int tx_empty;
239 int trigger;
240 int trigger_level;
241 struct pch_uart_buffer rxbuf;
242 unsigned int dmsr;
243 unsigned int fcr;
244 unsigned int mcr;
245 unsigned int use_dma;
246 struct dma_async_tx_descriptor *desc_tx;
247 struct dma_async_tx_descriptor *desc_rx;
248 struct pch_dma_slave param_tx;
249 struct pch_dma_slave param_rx;
250 struct dma_chan *chan_tx;
251 struct dma_chan *chan_rx;
252 struct scatterlist *sg_tx_p;
253 int nent;
254 struct scatterlist sg_rx;
255 int tx_dma_use;
256 void *rx_buf_virt;
257 dma_addr_t rx_buf_dma;
258
259 struct dentry *debugfs;
260#define IRQ_NAME_SIZE 17
261 char irq_name[IRQ_NAME_SIZE];
262
263 /* protect the eg20t_port private structure and io access to membase */
264 spinlock_t lock;
265};
266
267/**
268 * struct pch_uart_driver_data - private data structure for UART-DMA
269 * @port_type: The number of DMA channel
270 * @line_no: UART port line number (0, 1, 2...)
271 */
272struct pch_uart_driver_data {
273 int port_type;
274 int line_no;
275};
276
277enum pch_uart_num_t {
278 pch_et20t_uart0 = 0,
279 pch_et20t_uart1,
280 pch_et20t_uart2,
281 pch_et20t_uart3,
282 pch_ml7213_uart0,
283 pch_ml7213_uart1,
284 pch_ml7213_uart2,
285 pch_ml7223_uart0,
286 pch_ml7223_uart1,
287 pch_ml7831_uart0,
288 pch_ml7831_uart1,
289};
290
291static struct pch_uart_driver_data drv_dat[] = {
292 [pch_et20t_uart0] = {PCH_UART_8LINE, 0},
293 [pch_et20t_uart1] = {PCH_UART_2LINE, 1},
294 [pch_et20t_uart2] = {PCH_UART_2LINE, 2},
295 [pch_et20t_uart3] = {PCH_UART_2LINE, 3},
296 [pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
297 [pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
298 [pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
299 [pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
300 [pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
301 [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
302 [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
303};
304
305#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
306static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
307#endif
308static unsigned int default_baud = 9600;
309static unsigned int user_uartclk = 0;
310static const int trigger_level_256[4] = { 1, 64, 128, 224 };
311static const int trigger_level_64[4] = { 1, 16, 32, 56 };
312static const int trigger_level_16[4] = { 1, 4, 8, 14 };
313static const int trigger_level_1[4] = { 1, 1, 1, 1 };
314
315#ifdef CONFIG_DEBUG_FS
316
317#define PCH_REGS_BUFSIZE 1024
318
319
320static ssize_t port_show_regs(struct file *file, char __user *user_buf,
321 size_t count, loff_t *ppos)
322{
323 struct eg20t_port *priv = file->private_data;
324 char *buf;
325 u32 len = 0;
326 ssize_t ret;
327 unsigned char lcr;
328
329 buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL);
330 if (!buf)
331 return 0;
332
333 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
334 "PCH EG20T port[%d] regs:\n", priv->port.line);
335
336 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
337 "=================================\n");
338 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
339 "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER));
340 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
341 "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR));
342 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
343 "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR));
344 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
345 "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR));
346 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
347 "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR));
348 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
349 "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR));
350 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
351 "BRCSR: \t0x%02x\n",
352 ioread8(priv->membase + PCH_UART_BRCSR));
353
354 lcr = ioread8(priv->membase + UART_LCR);
355 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
356 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
357 "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL));
358 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
359 "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM));
360 iowrite8(lcr, priv->membase + UART_LCR);
361
362 if (len > PCH_REGS_BUFSIZE)
363 len = PCH_REGS_BUFSIZE;
364
365 ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
366 kfree(buf);
367 return ret;
368}
369
370static const struct file_operations port_regs_ops = {
371 .owner = THIS_MODULE,
372 .open = simple_open,
373 .read = port_show_regs,
374 .llseek = default_llseek,
375};
376#endif /* CONFIG_DEBUG_FS */
377
378static struct dmi_system_id pch_uart_dmi_table[] = {
379 {
380 .ident = "CM-iTC",
381 {
382 DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
383 },
384 (void *)CMITC_UARTCLK,
385 },
386 {
387 .ident = "FRI2",
388 {
389 DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
390 },
391 (void *)FRI2_64_UARTCLK,
392 },
393 {
394 .ident = "Fish River Island II",
395 {
396 DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
397 },
398 (void *)FRI2_48_UARTCLK,
399 },
400 {
401 .ident = "COMe-mTT",
402 {
403 DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
404 },
405 (void *)NTC1_UARTCLK,
406 },
407 {
408 .ident = "nanoETXexpress-TT",
409 {
410 DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
411 },
412 (void *)NTC1_UARTCLK,
413 },
414 {
415 .ident = "MinnowBoard",
416 {
417 DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
418 },
419 (void *)MINNOW_UARTCLK,
420 },
421};
422
423/* Return UART clock, checking for board specific clocks. */
424static unsigned int pch_uart_get_uartclk(void)
425{
426 const struct dmi_system_id *d;
427
428 if (user_uartclk)
429 return user_uartclk;
430
431 d = dmi_first_match(pch_uart_dmi_table);
432 if (d)
433 return (unsigned long)d->driver_data;
434
435 return DEFAULT_UARTCLK;
436}
437
438static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
439 unsigned int flag)
440{
441 u8 ier = ioread8(priv->membase + UART_IER);
442 ier |= flag & PCH_UART_IER_MASK;
443 iowrite8(ier, priv->membase + UART_IER);
444}
445
446static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
447 unsigned int flag)
448{
449 u8 ier = ioread8(priv->membase + UART_IER);
450 ier &= ~(flag & PCH_UART_IER_MASK);
451 iowrite8(ier, priv->membase + UART_IER);
452}
453
454static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud,
455 unsigned int parity, unsigned int bits,
456 unsigned int stb)
457{
458 unsigned int dll, dlm, lcr;
459 int div;
460
461 div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
462 if (div < 0 || USHRT_MAX <= div) {
463 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
464 return -EINVAL;
465 }
466
467 dll = (unsigned int)div & 0x00FFU;
468 dlm = ((unsigned int)div >> 8) & 0x00FFU;
469
470 if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
471 dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
472 return -EINVAL;
473 }
474
475 if (bits & ~PCH_UART_LCR_WLS) {
476 dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
477 return -EINVAL;
478 }
479
480 if (stb & ~PCH_UART_LCR_STB) {
481 dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
482 return -EINVAL;
483 }
484
485 lcr = parity;
486 lcr |= bits;
487 lcr |= stb;
488
489 dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n",
490 __func__, baud, div, lcr, jiffies);
491 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
492 iowrite8(dll, priv->membase + PCH_UART_DLL);
493 iowrite8(dlm, priv->membase + PCH_UART_DLM);
494 iowrite8(lcr, priv->membase + UART_LCR);
495
496 return 0;
497}
498
499static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
500 unsigned int flag)
501{
502 if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
503 dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
504 __func__, flag);
505 return -EINVAL;
506 }
507
508 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
509 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
510 priv->membase + UART_FCR);
511 iowrite8(priv->fcr, priv->membase + UART_FCR);
512
513 return 0;
514}
515
516static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
517 unsigned int dmamode,
518 unsigned int fifo_size, unsigned int trigger)
519{
520 u8 fcr;
521
522 if (dmamode & ~PCH_UART_FCR_DMS) {
523 dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
524 __func__, dmamode);
525 return -EINVAL;
526 }
527
528 if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
529 dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
530 __func__, fifo_size);
531 return -EINVAL;
532 }
533
534 if (trigger & ~PCH_UART_FCR_RFTL) {
535 dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
536 __func__, trigger);
537 return -EINVAL;
538 }
539
540 switch (priv->fifo_size) {
541 case 256:
542 priv->trigger_level =
543 trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
544 break;
545 case 64:
546 priv->trigger_level =
547 trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
548 break;
549 case 16:
550 priv->trigger_level =
551 trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
552 break;
553 default:
554 priv->trigger_level =
555 trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
556 break;
557 }
558 fcr =
559 dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
560 iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
561 iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
562 priv->membase + UART_FCR);
563 iowrite8(fcr, priv->membase + UART_FCR);
564 priv->fcr = fcr;
565
566 return 0;
567}
568
569static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
570{
571 unsigned int msr = ioread8(priv->membase + UART_MSR);
572 priv->dmsr = msr & PCH_UART_MSR_DELTA;
573 return (u8)msr;
574}
575
576static void pch_uart_hal_write(struct eg20t_port *priv,
577 const unsigned char *buf, int tx_size)
578{
579 int i;
580 unsigned int thr;
581
582 for (i = 0; i < tx_size;) {
583 thr = buf[i++];
584 iowrite8(thr, priv->membase + PCH_UART_THR);
585 }
586}
587
588static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
589 int rx_size)
590{
591 int i;
592 u8 rbr, lsr;
593 struct uart_port *port = &priv->port;
594
595 lsr = ioread8(priv->membase + UART_LSR);
596 for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
597 i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI);
598 lsr = ioread8(priv->membase + UART_LSR)) {
599 rbr = ioread8(priv->membase + PCH_UART_RBR);
600
601 if (lsr & UART_LSR_BI) {
602 port->icount.brk++;
603 if (uart_handle_break(port))
604 continue;
605 }
606#ifdef SUPPORT_SYSRQ
607 if (port->sysrq) {
608 if (uart_handle_sysrq_char(port, rbr))
609 continue;
610 }
611#endif
612
613 buf[i++] = rbr;
614 }
615 return i;
616}
617
618static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
619{
620 return ioread8(priv->membase + UART_IIR) &\
621 (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
622}
623
624static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
625{
626 return ioread8(priv->membase + UART_LSR);
627}
628
629static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
630{
631 unsigned int lcr;
632
633 lcr = ioread8(priv->membase + UART_LCR);
634 if (on)
635 lcr |= PCH_UART_LCR_SB;
636 else
637 lcr &= ~PCH_UART_LCR_SB;
638
639 iowrite8(lcr, priv->membase + UART_LCR);
640}
641
642static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
643 int size)
644{
645 struct uart_port *port = &priv->port;
646 struct tty_port *tport = &port->state->port;
647
648 tty_insert_flip_string(tport, buf, size);
649 tty_flip_buffer_push(tport);
650
651 return 0;
652}
653
654static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
655{
656 int ret = 0;
657 struct uart_port *port = &priv->port;
658
659 if (port->x_char) {
660 dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
661 __func__, port->x_char, jiffies);
662 buf[0] = port->x_char;
663 port->x_char = 0;
664 ret = 1;
665 }
666
667 return ret;
668}
669
670static int dma_push_rx(struct eg20t_port *priv, int size)
671{
672 int room;
673 struct uart_port *port = &priv->port;
674 struct tty_port *tport = &port->state->port;
675
676 room = tty_buffer_request_room(tport, size);
677
678 if (room < size)
679 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
680 size - room);
681 if (!room)
682 return 0;
683
684 tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size);
685
686 port->icount.rx += room;
687
688 return room;
689}
690
691static void pch_free_dma(struct uart_port *port)
692{
693 struct eg20t_port *priv;
694 priv = container_of(port, struct eg20t_port, port);
695
696 if (priv->chan_tx) {
697 dma_release_channel(priv->chan_tx);
698 priv->chan_tx = NULL;
699 }
700 if (priv->chan_rx) {
701 dma_release_channel(priv->chan_rx);
702 priv->chan_rx = NULL;
703 }
704
705 if (priv->rx_buf_dma) {
706 dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
707 priv->rx_buf_dma);
708 priv->rx_buf_virt = NULL;
709 priv->rx_buf_dma = 0;
710 }
711
712 return;
713}
714
715static bool filter(struct dma_chan *chan, void *slave)
716{
717 struct pch_dma_slave *param = slave;
718
719 if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
720 chan->device->dev)) {
721 chan->private = param;
722 return true;
723 } else {
724 return false;
725 }
726}
727
728static void pch_request_dma(struct uart_port *port)
729{
730 dma_cap_mask_t mask;
731 struct dma_chan *chan;
732 struct pci_dev *dma_dev;
733 struct pch_dma_slave *param;
734 struct eg20t_port *priv =
735 container_of(port, struct eg20t_port, port);
736 dma_cap_zero(mask);
737 dma_cap_set(DMA_SLAVE, mask);
738
739 /* Get DMA's dev information */
740 dma_dev = pci_get_slot(priv->pdev->bus,
741 PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0));
742
743 /* Set Tx DMA */
744 param = &priv->param_tx;
745 param->dma_dev = &dma_dev->dev;
746 param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
747
748 param->tx_reg = port->mapbase + UART_TX;
749 chan = dma_request_channel(mask, filter, param);
750 if (!chan) {
751 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
752 __func__);
753 return;
754 }
755 priv->chan_tx = chan;
756
757 /* Set Rx DMA */
758 param = &priv->param_rx;
759 param->dma_dev = &dma_dev->dev;
760 param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
761
762 param->rx_reg = port->mapbase + UART_RX;
763 chan = dma_request_channel(mask, filter, param);
764 if (!chan) {
765 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
766 __func__);
767 dma_release_channel(priv->chan_tx);
768 priv->chan_tx = NULL;
769 return;
770 }
771
772 /* Get Consistent memory for DMA */
773 priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
774 &priv->rx_buf_dma, GFP_KERNEL);
775 priv->chan_rx = chan;
776}
777
778static void pch_dma_rx_complete(void *arg)
779{
780 struct eg20t_port *priv = arg;
781 struct uart_port *port = &priv->port;
782 int count;
783
784 dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
785 count = dma_push_rx(priv, priv->trigger_level);
786 if (count)
787 tty_flip_buffer_push(&port->state->port);
788 async_tx_ack(priv->desc_rx);
789 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
790 PCH_UART_HAL_RX_ERR_INT);
791}
792
793static void pch_dma_tx_complete(void *arg)
794{
795 struct eg20t_port *priv = arg;
796 struct uart_port *port = &priv->port;
797 struct circ_buf *xmit = &port->state->xmit;
798 struct scatterlist *sg = priv->sg_tx_p;
799 int i;
800
801 for (i = 0; i < priv->nent; i++, sg++) {
802 xmit->tail += sg_dma_len(sg);
803 port->icount.tx += sg_dma_len(sg);
804 }
805 xmit->tail &= UART_XMIT_SIZE - 1;
806 async_tx_ack(priv->desc_tx);
807 dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
808 priv->tx_dma_use = 0;
809 priv->nent = 0;
810 kfree(priv->sg_tx_p);
811 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
812}
813
814static int pop_tx(struct eg20t_port *priv, int size)
815{
816 int count = 0;
817 struct uart_port *port = &priv->port;
818 struct circ_buf *xmit = &port->state->xmit;
819
820 if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
821 goto pop_tx_end;
822
823 do {
824 int cnt_to_end =
825 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
826 int sz = min(size - count, cnt_to_end);
827 pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
828 xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
829 count += sz;
830 } while (!uart_circ_empty(xmit) && count < size);
831
832pop_tx_end:
833 dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
834 count, size - count, jiffies);
835
836 return count;
837}
838
839static int handle_rx_to(struct eg20t_port *priv)
840{
841 struct pch_uart_buffer *buf;
842 int rx_size;
843 int ret;
844 if (!priv->start_rx) {
845 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
846 PCH_UART_HAL_RX_ERR_INT);
847 return 0;
848 }
849 buf = &priv->rxbuf;
850 do {
851 rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
852 ret = push_rx(priv, buf->buf, rx_size);
853 if (ret)
854 return 0;
855 } while (rx_size == buf->size);
856
857 return PCH_UART_HANDLED_RX_INT;
858}
859
860static int handle_rx(struct eg20t_port *priv)
861{
862 return handle_rx_to(priv);
863}
864
865static int dma_handle_rx(struct eg20t_port *priv)
866{
867 struct uart_port *port = &priv->port;
868 struct dma_async_tx_descriptor *desc;
869 struct scatterlist *sg;
870
871 priv = container_of(port, struct eg20t_port, port);
872 sg = &priv->sg_rx;
873
874 sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
875
876 sg_dma_len(sg) = priv->trigger_level;
877
878 sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
879 sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
880 ~PAGE_MASK);
881
882 sg_dma_address(sg) = priv->rx_buf_dma;
883
884 desc = dmaengine_prep_slave_sg(priv->chan_rx,
885 sg, 1, DMA_DEV_TO_MEM,
886 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
887
888 if (!desc)
889 return 0;
890
891 priv->desc_rx = desc;
892 desc->callback = pch_dma_rx_complete;
893 desc->callback_param = priv;
894 desc->tx_submit(desc);
895 dma_async_issue_pending(priv->chan_rx);
896
897 return PCH_UART_HANDLED_RX_INT;
898}
899
900static unsigned int handle_tx(struct eg20t_port *priv)
901{
902 struct uart_port *port = &priv->port;
903 struct circ_buf *xmit = &port->state->xmit;
904 int fifo_size;
905 int tx_size;
906 int size;
907 int tx_empty;
908
909 if (!priv->start_tx) {
910 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
911 __func__, jiffies);
912 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
913 priv->tx_empty = 1;
914 return 0;
915 }
916
917 fifo_size = max(priv->fifo_size, 1);
918 tx_empty = 1;
919 if (pop_tx_x(priv, xmit->buf)) {
920 pch_uart_hal_write(priv, xmit->buf, 1);
921 port->icount.tx++;
922 tx_empty = 0;
923 fifo_size--;
924 }
925 size = min(xmit->head - xmit->tail, fifo_size);
926 if (size < 0)
927 size = fifo_size;
928
929 tx_size = pop_tx(priv, size);
930 if (tx_size > 0) {
931 port->icount.tx += tx_size;
932 tx_empty = 0;
933 }
934
935 priv->tx_empty = tx_empty;
936
937 if (tx_empty) {
938 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
939 uart_write_wakeup(port);
940 }
941
942 return PCH_UART_HANDLED_TX_INT;
943}
944
945static unsigned int dma_handle_tx(struct eg20t_port *priv)
946{
947 struct uart_port *port = &priv->port;
948 struct circ_buf *xmit = &port->state->xmit;
949 struct scatterlist *sg;
950 int nent;
951 int fifo_size;
952 int tx_empty;
953 struct dma_async_tx_descriptor *desc;
954 int num;
955 int i;
956 int bytes;
957 int size;
958 int rem;
959
960 if (!priv->start_tx) {
961 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
962 __func__, jiffies);
963 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
964 priv->tx_empty = 1;
965 return 0;
966 }
967
968 if (priv->tx_dma_use) {
969 dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
970 __func__, jiffies);
971 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
972 priv->tx_empty = 1;
973 return 0;
974 }
975
976 fifo_size = max(priv->fifo_size, 1);
977 tx_empty = 1;
978 if (pop_tx_x(priv, xmit->buf)) {
979 pch_uart_hal_write(priv, xmit->buf, 1);
980 port->icount.tx++;
981 tx_empty = 0;
982 fifo_size--;
983 }
984
985 bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
986 UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
987 xmit->tail, UART_XMIT_SIZE));
988 if (!bytes) {
989 dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
990 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
991 uart_write_wakeup(port);
992 return 0;
993 }
994
995 if (bytes > fifo_size) {
996 num = bytes / fifo_size + 1;
997 size = fifo_size;
998 rem = bytes % fifo_size;
999 } else {
1000 num = 1;
1001 size = bytes;
1002 rem = bytes;
1003 }
1004
1005 dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
1006 __func__, num, size, rem);
1007
1008 priv->tx_dma_use = 1;
1009
1010 priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
1011 if (!priv->sg_tx_p) {
1012 dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
1013 return 0;
1014 }
1015
1016 sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
1017 sg = priv->sg_tx_p;
1018
1019 for (i = 0; i < num; i++, sg++) {
1020 if (i == (num - 1))
1021 sg_set_page(sg, virt_to_page(xmit->buf),
1022 rem, fifo_size * i);
1023 else
1024 sg_set_page(sg, virt_to_page(xmit->buf),
1025 size, fifo_size * i);
1026 }
1027
1028 sg = priv->sg_tx_p;
1029 nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
1030 if (!nent) {
1031 dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
1032 return 0;
1033 }
1034 priv->nent = nent;
1035
1036 for (i = 0; i < nent; i++, sg++) {
1037 sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
1038 fifo_size * i;
1039 sg_dma_address(sg) = (sg_dma_address(sg) &
1040 ~(UART_XMIT_SIZE - 1)) + sg->offset;
1041 if (i == (nent - 1))
1042 sg_dma_len(sg) = rem;
1043 else
1044 sg_dma_len(sg) = size;
1045 }
1046
1047 desc = dmaengine_prep_slave_sg(priv->chan_tx,
1048 priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
1049 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1050 if (!desc) {
1051 dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n",
1052 __func__);
1053 return 0;
1054 }
1055 dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
1056 priv->desc_tx = desc;
1057 desc->callback = pch_dma_tx_complete;
1058 desc->callback_param = priv;
1059
1060 desc->tx_submit(desc);
1061
1062 dma_async_issue_pending(priv->chan_tx);
1063
1064 return PCH_UART_HANDLED_TX_INT;
1065}
1066
1067static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
1068{
1069 struct uart_port *port = &priv->port;
1070 struct tty_struct *tty = tty_port_tty_get(&port->state->port);
1071 char *error_msg[5] = {};
1072 int i = 0;
1073
1074 if (lsr & PCH_UART_LSR_ERR)
1075 error_msg[i++] = "Error data in FIFO\n";
1076
1077 if (lsr & UART_LSR_FE) {
1078 port->icount.frame++;
1079 error_msg[i++] = " Framing Error\n";
1080 }
1081
1082 if (lsr & UART_LSR_PE) {
1083 port->icount.parity++;
1084 error_msg[i++] = " Parity Error\n";
1085 }
1086
1087 if (lsr & UART_LSR_OE) {
1088 port->icount.overrun++;
1089 error_msg[i++] = " Overrun Error\n";
1090 }
1091
1092 if (tty == NULL) {
1093 for (i = 0; error_msg[i] != NULL; i++)
1094 dev_err(&priv->pdev->dev, error_msg[i]);
1095 } else {
1096 tty_kref_put(tty);
1097 }
1098}
1099
1100static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
1101{
1102 struct eg20t_port *priv = dev_id;
1103 unsigned int handled;
1104 u8 lsr;
1105 int ret = 0;
1106 unsigned char iid;
1107 unsigned long flags;
1108 int next = 1;
1109 u8 msr;
1110
1111 spin_lock_irqsave(&priv->lock, flags);
1112 handled = 0;
1113 while (next) {
1114 iid = pch_uart_hal_get_iid(priv);
1115 if (iid & PCH_UART_IIR_IP) /* No Interrupt */
1116 break;
1117 switch (iid) {
1118 case PCH_UART_IID_RLS: /* Receiver Line Status */
1119 lsr = pch_uart_hal_get_line_status(priv);
1120 if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
1121 UART_LSR_PE | UART_LSR_OE)) {
1122 pch_uart_err_ir(priv, lsr);
1123 ret = PCH_UART_HANDLED_RX_ERR_INT;
1124 } else {
1125 ret = PCH_UART_HANDLED_LS_INT;
1126 }
1127 break;
1128 case PCH_UART_IID_RDR: /* Received Data Ready */
1129 if (priv->use_dma) {
1130 pch_uart_hal_disable_interrupt(priv,
1131 PCH_UART_HAL_RX_INT |
1132 PCH_UART_HAL_RX_ERR_INT);
1133 ret = dma_handle_rx(priv);
1134 if (!ret)
1135 pch_uart_hal_enable_interrupt(priv,
1136 PCH_UART_HAL_RX_INT |
1137 PCH_UART_HAL_RX_ERR_INT);
1138 } else {
1139 ret = handle_rx(priv);
1140 }
1141 break;
1142 case PCH_UART_IID_RDR_TO: /* Received Data Ready
1143 (FIFO Timeout) */
1144 ret = handle_rx_to(priv);
1145 break;
1146 case PCH_UART_IID_THRE: /* Transmitter Holding Register
1147 Empty */
1148 if (priv->use_dma)
1149 ret = dma_handle_tx(priv);
1150 else
1151 ret = handle_tx(priv);
1152 break;
1153 case PCH_UART_IID_MS: /* Modem Status */
1154 msr = pch_uart_hal_get_modem(priv);
1155 next = 0; /* MS ir prioirty is the lowest. So, MS ir
1156 means final interrupt */
1157 if ((msr & UART_MSR_ANY_DELTA) == 0)
1158 break;
1159 ret |= PCH_UART_HANDLED_MS_INT;
1160 break;
1161 default: /* Never junp to this label */
1162 dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
1163 iid, jiffies);
1164 ret = -1;
1165 next = 0;
1166 break;
1167 }
1168 handled |= (unsigned int)ret;
1169 }
1170
1171 spin_unlock_irqrestore(&priv->lock, flags);
1172 return IRQ_RETVAL(handled);
1173}
1174
1175/* This function tests whether the transmitter fifo and shifter for the port
1176 described by 'port' is empty. */
1177static unsigned int pch_uart_tx_empty(struct uart_port *port)
1178{
1179 struct eg20t_port *priv;
1180
1181 priv = container_of(port, struct eg20t_port, port);
1182 if (priv->tx_empty)
1183 return TIOCSER_TEMT;
1184 else
1185 return 0;
1186}
1187
1188/* Returns the current state of modem control inputs. */
1189static unsigned int pch_uart_get_mctrl(struct uart_port *port)
1190{
1191 struct eg20t_port *priv;
1192 u8 modem;
1193 unsigned int ret = 0;
1194
1195 priv = container_of(port, struct eg20t_port, port);
1196 modem = pch_uart_hal_get_modem(priv);
1197
1198 if (modem & UART_MSR_DCD)
1199 ret |= TIOCM_CAR;
1200
1201 if (modem & UART_MSR_RI)
1202 ret |= TIOCM_RNG;
1203
1204 if (modem & UART_MSR_DSR)
1205 ret |= TIOCM_DSR;
1206
1207 if (modem & UART_MSR_CTS)
1208 ret |= TIOCM_CTS;
1209
1210 return ret;
1211}
1212
1213static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1214{
1215 u32 mcr = 0;
1216 struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
1217
1218 if (mctrl & TIOCM_DTR)
1219 mcr |= UART_MCR_DTR;
1220 if (mctrl & TIOCM_RTS)
1221 mcr |= UART_MCR_RTS;
1222 if (mctrl & TIOCM_LOOP)
1223 mcr |= UART_MCR_LOOP;
1224
1225 if (priv->mcr & UART_MCR_AFE)
1226 mcr |= UART_MCR_AFE;
1227
1228 if (mctrl)
1229 iowrite8(mcr, priv->membase + UART_MCR);
1230}
1231
1232static void pch_uart_stop_tx(struct uart_port *port)
1233{
1234 struct eg20t_port *priv;
1235 priv = container_of(port, struct eg20t_port, port);
1236 priv->start_tx = 0;
1237 priv->tx_dma_use = 0;
1238}
1239
1240static void pch_uart_start_tx(struct uart_port *port)
1241{
1242 struct eg20t_port *priv;
1243
1244 priv = container_of(port, struct eg20t_port, port);
1245
1246 if (priv->use_dma) {
1247 if (priv->tx_dma_use) {
1248 dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
1249 __func__);
1250 return;
1251 }
1252 }
1253
1254 priv->start_tx = 1;
1255 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
1256}
1257
1258static void pch_uart_stop_rx(struct uart_port *port)
1259{
1260 struct eg20t_port *priv;
1261 priv = container_of(port, struct eg20t_port, port);
1262 priv->start_rx = 0;
1263 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
1264 PCH_UART_HAL_RX_ERR_INT);
1265}
1266
1267/* Enable the modem status interrupts. */
1268static void pch_uart_enable_ms(struct uart_port *port)
1269{
1270 struct eg20t_port *priv;
1271 priv = container_of(port, struct eg20t_port, port);
1272 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
1273}
1274
1275/* Control the transmission of a break signal. */
1276static void pch_uart_break_ctl(struct uart_port *port, int ctl)
1277{
1278 struct eg20t_port *priv;
1279 unsigned long flags;
1280
1281 priv = container_of(port, struct eg20t_port, port);
1282 spin_lock_irqsave(&priv->lock, flags);
1283 pch_uart_hal_set_break(priv, ctl);
1284 spin_unlock_irqrestore(&priv->lock, flags);
1285}
1286
1287/* Grab any interrupt resources and initialise any low level driver state. */
1288static int pch_uart_startup(struct uart_port *port)
1289{
1290 struct eg20t_port *priv;
1291 int ret;
1292 int fifo_size;
1293 int trigger_level;
1294
1295 priv = container_of(port, struct eg20t_port, port);
1296 priv->tx_empty = 1;
1297
1298 if (port->uartclk)
1299 priv->uartclk = port->uartclk;
1300 else
1301 port->uartclk = priv->uartclk;
1302
1303 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1304 ret = pch_uart_hal_set_line(priv, default_baud,
1305 PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
1306 PCH_UART_HAL_STB1);
1307 if (ret)
1308 return ret;
1309
1310 switch (priv->fifo_size) {
1311 case 256:
1312 fifo_size = PCH_UART_HAL_FIFO256;
1313 break;
1314 case 64:
1315 fifo_size = PCH_UART_HAL_FIFO64;
1316 break;
1317 case 16:
1318 fifo_size = PCH_UART_HAL_FIFO16;
1319 break;
1320 case 1:
1321 default:
1322 fifo_size = PCH_UART_HAL_FIFO_DIS;
1323 break;
1324 }
1325
1326 switch (priv->trigger) {
1327 case PCH_UART_HAL_TRIGGER1:
1328 trigger_level = 1;
1329 break;
1330 case PCH_UART_HAL_TRIGGER_L:
1331 trigger_level = priv->fifo_size / 4;
1332 break;
1333 case PCH_UART_HAL_TRIGGER_M:
1334 trigger_level = priv->fifo_size / 2;
1335 break;
1336 case PCH_UART_HAL_TRIGGER_H:
1337 default:
1338 trigger_level = priv->fifo_size - (priv->fifo_size / 8);
1339 break;
1340 }
1341
1342 priv->trigger_level = trigger_level;
1343 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1344 fifo_size, priv->trigger);
1345 if (ret < 0)
1346 return ret;
1347
1348 ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
1349 priv->irq_name, priv);
1350 if (ret < 0)
1351 return ret;
1352
1353 if (priv->use_dma)
1354 pch_request_dma(port);
1355
1356 priv->start_rx = 1;
1357 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
1358 PCH_UART_HAL_RX_ERR_INT);
1359 uart_update_timeout(port, CS8, default_baud);
1360
1361 return 0;
1362}
1363
1364static void pch_uart_shutdown(struct uart_port *port)
1365{
1366 struct eg20t_port *priv;
1367 int ret;
1368
1369 priv = container_of(port, struct eg20t_port, port);
1370 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1371 pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
1372 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1373 PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
1374 if (ret)
1375 dev_err(priv->port.dev,
1376 "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
1377
1378 pch_free_dma(port);
1379
1380 free_irq(priv->port.irq, priv);
1381}
1382
1383/* Change the port parameters, including word length, parity, stop
1384 *bits. Update read_status_mask and ignore_status_mask to indicate
1385 *the types of events we are interested in receiving. */
1386static void pch_uart_set_termios(struct uart_port *port,
1387 struct ktermios *termios, struct ktermios *old)
1388{
1389 int rtn;
1390 unsigned int baud, parity, bits, stb;
1391 struct eg20t_port *priv;
1392 unsigned long flags;
1393
1394 priv = container_of(port, struct eg20t_port, port);
1395 switch (termios->c_cflag & CSIZE) {
1396 case CS5:
1397 bits = PCH_UART_HAL_5BIT;
1398 break;
1399 case CS6:
1400 bits = PCH_UART_HAL_6BIT;
1401 break;
1402 case CS7:
1403 bits = PCH_UART_HAL_7BIT;
1404 break;
1405 default: /* CS8 */
1406 bits = PCH_UART_HAL_8BIT;
1407 break;
1408 }
1409 if (termios->c_cflag & CSTOPB)
1410 stb = PCH_UART_HAL_STB2;
1411 else
1412 stb = PCH_UART_HAL_STB1;
1413
1414 if (termios->c_cflag & PARENB) {
1415 if (termios->c_cflag & PARODD)
1416 parity = PCH_UART_HAL_PARITY_ODD;
1417 else
1418 parity = PCH_UART_HAL_PARITY_EVEN;
1419
1420 } else
1421 parity = PCH_UART_HAL_PARITY_NONE;
1422
1423 /* Only UART0 has auto hardware flow function */
1424 if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
1425 priv->mcr |= UART_MCR_AFE;
1426 else
1427 priv->mcr &= ~UART_MCR_AFE;
1428
1429 termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
1430
1431 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1432
1433 spin_lock_irqsave(&priv->lock, flags);
1434 spin_lock(&port->lock);
1435
1436 uart_update_timeout(port, termios->c_cflag, baud);
1437 rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
1438 if (rtn)
1439 goto out;
1440
1441 pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
1442 /* Don't rewrite B0 */
1443 if (tty_termios_baud_rate(termios))
1444 tty_termios_encode_baud_rate(termios, baud, baud);
1445
1446out:
1447 spin_unlock(&port->lock);
1448 spin_unlock_irqrestore(&priv->lock, flags);
1449}
1450
1451static const char *pch_uart_type(struct uart_port *port)
1452{
1453 return KBUILD_MODNAME;
1454}
1455
1456static void pch_uart_release_port(struct uart_port *port)
1457{
1458 struct eg20t_port *priv;
1459
1460 priv = container_of(port, struct eg20t_port, port);
1461 pci_iounmap(priv->pdev, priv->membase);
1462 pci_release_regions(priv->pdev);
1463}
1464
1465static int pch_uart_request_port(struct uart_port *port)
1466{
1467 struct eg20t_port *priv;
1468 int ret;
1469 void __iomem *membase;
1470
1471 priv = container_of(port, struct eg20t_port, port);
1472 ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
1473 if (ret < 0)
1474 return -EBUSY;
1475
1476 membase = pci_iomap(priv->pdev, 1, 0);
1477 if (!membase) {
1478 pci_release_regions(priv->pdev);
1479 return -EBUSY;
1480 }
1481 priv->membase = port->membase = membase;
1482
1483 return 0;
1484}
1485
1486static void pch_uart_config_port(struct uart_port *port, int type)
1487{
1488 struct eg20t_port *priv;
1489
1490 priv = container_of(port, struct eg20t_port, port);
1491 if (type & UART_CONFIG_TYPE) {
1492 port->type = priv->port_type;
1493 pch_uart_request_port(port);
1494 }
1495}
1496
1497static int pch_uart_verify_port(struct uart_port *port,
1498 struct serial_struct *serinfo)
1499{
1500 struct eg20t_port *priv;
1501
1502 priv = container_of(port, struct eg20t_port, port);
1503 if (serinfo->flags & UPF_LOW_LATENCY) {
1504 dev_info(priv->port.dev,
1505 "PCH UART : Use PIO Mode (without DMA)\n");
1506 priv->use_dma = 0;
1507 serinfo->flags &= ~UPF_LOW_LATENCY;
1508 } else {
1509#ifndef CONFIG_PCH_DMA
1510 dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
1511 __func__);
1512 return -EOPNOTSUPP;
1513#endif
1514 if (!priv->use_dma) {
1515 pch_request_dma(port);
1516 if (priv->chan_rx)
1517 priv->use_dma = 1;
1518 }
1519 dev_info(priv->port.dev, "PCH UART: %s\n",
1520 priv->use_dma ?
1521 "Use DMA Mode" : "No DMA");
1522 }
1523
1524 return 0;
1525}
1526
1527#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE)
1528/*
1529 * Wait for transmitter & holding register to empty
1530 */
1531static void wait_for_xmitr(struct eg20t_port *up, int bits)
1532{
1533 unsigned int status, tmout = 10000;
1534
1535 /* Wait up to 10ms for the character(s) to be sent. */
1536 for (;;) {
1537 status = ioread8(up->membase + UART_LSR);
1538
1539 if ((status & bits) == bits)
1540 break;
1541 if (--tmout == 0)
1542 break;
1543 udelay(1);
1544 }
1545
1546 /* Wait up to 1s for flow control if necessary */
1547 if (up->port.flags & UPF_CONS_FLOW) {
1548 unsigned int tmout;
1549 for (tmout = 1000000; tmout; tmout--) {
1550 unsigned int msr = ioread8(up->membase + UART_MSR);
1551 if (msr & UART_MSR_CTS)
1552 break;
1553 udelay(1);
1554 touch_nmi_watchdog();
1555 }
1556 }
1557}
1558#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */
1559
1560#ifdef CONFIG_CONSOLE_POLL
1561/*
1562 * Console polling routines for communicate via uart while
1563 * in an interrupt or debug context.
1564 */
1565static int pch_uart_get_poll_char(struct uart_port *port)
1566{
1567 struct eg20t_port *priv =
1568 container_of(port, struct eg20t_port, port);
1569 u8 lsr = ioread8(priv->membase + UART_LSR);
1570
1571 if (!(lsr & UART_LSR_DR))
1572 return NO_POLL_CHAR;
1573
1574 return ioread8(priv->membase + PCH_UART_RBR);
1575}
1576
1577
1578static void pch_uart_put_poll_char(struct uart_port *port,
1579 unsigned char c)
1580{
1581 unsigned int ier;
1582 struct eg20t_port *priv =
1583 container_of(port, struct eg20t_port, port);
1584
1585 /*
1586 * First save the IER then disable the interrupts
1587 */
1588 ier = ioread8(priv->membase + UART_IER);
1589 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1590
1591 wait_for_xmitr(priv, UART_LSR_THRE);
1592 /*
1593 * Send the character out.
1594 */
1595 iowrite8(c, priv->membase + PCH_UART_THR);
1596
1597 /*
1598 * Finally, wait for transmitter to become empty
1599 * and restore the IER
1600 */
1601 wait_for_xmitr(priv, BOTH_EMPTY);
1602 iowrite8(ier, priv->membase + UART_IER);
1603}
1604#endif /* CONFIG_CONSOLE_POLL */
1605
1606static struct uart_ops pch_uart_ops = {
1607 .tx_empty = pch_uart_tx_empty,
1608 .set_mctrl = pch_uart_set_mctrl,
1609 .get_mctrl = pch_uart_get_mctrl,
1610 .stop_tx = pch_uart_stop_tx,
1611 .start_tx = pch_uart_start_tx,
1612 .stop_rx = pch_uart_stop_rx,
1613 .enable_ms = pch_uart_enable_ms,
1614 .break_ctl = pch_uart_break_ctl,
1615 .startup = pch_uart_startup,
1616 .shutdown = pch_uart_shutdown,
1617 .set_termios = pch_uart_set_termios,
1618/* .pm = pch_uart_pm, Not supported yet */
1619 .type = pch_uart_type,
1620 .release_port = pch_uart_release_port,
1621 .request_port = pch_uart_request_port,
1622 .config_port = pch_uart_config_port,
1623 .verify_port = pch_uart_verify_port,
1624#ifdef CONFIG_CONSOLE_POLL
1625 .poll_get_char = pch_uart_get_poll_char,
1626 .poll_put_char = pch_uart_put_poll_char,
1627#endif
1628};
1629
1630#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1631
1632static void pch_console_putchar(struct uart_port *port, int ch)
1633{
1634 struct eg20t_port *priv =
1635 container_of(port, struct eg20t_port, port);
1636
1637 wait_for_xmitr(priv, UART_LSR_THRE);
1638 iowrite8(ch, priv->membase + PCH_UART_THR);
1639}
1640
1641/*
1642 * Print a string to the serial port trying not to disturb
1643 * any possible real use of the port...
1644 *
1645 * The console_lock must be held when we get here.
1646 */
1647static void
1648pch_console_write(struct console *co, const char *s, unsigned int count)
1649{
1650 struct eg20t_port *priv;
1651 unsigned long flags;
1652 int priv_locked = 1;
1653 int port_locked = 1;
1654 u8 ier;
1655
1656 priv = pch_uart_ports[co->index];
1657
1658 touch_nmi_watchdog();
1659
1660 local_irq_save(flags);
1661 if (priv->port.sysrq) {
1662 /* call to uart_handle_sysrq_char already took the priv lock */
1663 priv_locked = 0;
1664 /* serial8250_handle_port() already took the port lock */
1665 port_locked = 0;
1666 } else if (oops_in_progress) {
1667 priv_locked = spin_trylock(&priv->lock);
1668 port_locked = spin_trylock(&priv->port.lock);
1669 } else {
1670 spin_lock(&priv->lock);
1671 spin_lock(&priv->port.lock);
1672 }
1673
1674 /*
1675 * First save the IER then disable the interrupts
1676 */
1677 ier = ioread8(priv->membase + UART_IER);
1678
1679 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1680
1681 uart_console_write(&priv->port, s, count, pch_console_putchar);
1682
1683 /*
1684 * Finally, wait for transmitter to become empty
1685 * and restore the IER
1686 */
1687 wait_for_xmitr(priv, BOTH_EMPTY);
1688 iowrite8(ier, priv->membase + UART_IER);
1689
1690 if (port_locked)
1691 spin_unlock(&priv->port.lock);
1692 if (priv_locked)
1693 spin_unlock(&priv->lock);
1694 local_irq_restore(flags);
1695}
1696
1697static int __init pch_console_setup(struct console *co, char *options)
1698{
1699 struct uart_port *port;
1700 int baud = default_baud;
1701 int bits = 8;
1702 int parity = 'n';
1703 int flow = 'n';
1704
1705 /*
1706 * Check whether an invalid uart number has been specified, and
1707 * if so, search for the first available port that does have
1708 * console support.
1709 */
1710 if (co->index >= PCH_UART_NR)
1711 co->index = 0;
1712 port = &pch_uart_ports[co->index]->port;
1713
1714 if (!port || (!port->iobase && !port->membase))
1715 return -ENODEV;
1716
1717 port->uartclk = pch_uart_get_uartclk();
1718
1719 if (options)
1720 uart_parse_options(options, &baud, &parity, &bits, &flow);
1721
1722 return uart_set_options(port, co, baud, parity, bits, flow);
1723}
1724
1725static struct uart_driver pch_uart_driver;
1726
1727static struct console pch_console = {
1728 .name = PCH_UART_DRIVER_DEVICE,
1729 .write = pch_console_write,
1730 .device = uart_console_device,
1731 .setup = pch_console_setup,
1732 .flags = CON_PRINTBUFFER | CON_ANYTIME,
1733 .index = -1,
1734 .data = &pch_uart_driver,
1735};
1736
1737#define PCH_CONSOLE (&pch_console)
1738#else
1739#define PCH_CONSOLE NULL
1740#endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */
1741
1742static struct uart_driver pch_uart_driver = {
1743 .owner = THIS_MODULE,
1744 .driver_name = KBUILD_MODNAME,
1745 .dev_name = PCH_UART_DRIVER_DEVICE,
1746 .major = 0,
1747 .minor = 0,
1748 .nr = PCH_UART_NR,
1749 .cons = PCH_CONSOLE,
1750};
1751
1752static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
1753 const struct pci_device_id *id)
1754{
1755 struct eg20t_port *priv;
1756 int ret;
1757 unsigned int iobase;
1758 unsigned int mapbase;
1759 unsigned char *rxbuf;
1760 int fifosize;
1761 int port_type;
1762 struct pch_uart_driver_data *board;
1763#ifdef CONFIG_DEBUG_FS
1764 char name[32]; /* for debugfs file name */
1765#endif
1766
1767 board = &drv_dat[id->driver_data];
1768 port_type = board->port_type;
1769
1770 priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
1771 if (priv == NULL)
1772 goto init_port_alloc_err;
1773
1774 rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
1775 if (!rxbuf)
1776 goto init_port_free_txbuf;
1777
1778 switch (port_type) {
1779 case PORT_UNKNOWN:
1780 fifosize = 256; /* EG20T/ML7213: UART0 */
1781 break;
1782 case PORT_8250:
1783 fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
1784 break;
1785 default:
1786 dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
1787 goto init_port_hal_free;
1788 }
1789
1790 pci_enable_msi(pdev);
1791 pci_set_master(pdev);
1792
1793 spin_lock_init(&priv->lock);
1794
1795 iobase = pci_resource_start(pdev, 0);
1796 mapbase = pci_resource_start(pdev, 1);
1797 priv->mapbase = mapbase;
1798 priv->iobase = iobase;
1799 priv->pdev = pdev;
1800 priv->tx_empty = 1;
1801 priv->rxbuf.buf = rxbuf;
1802 priv->rxbuf.size = PAGE_SIZE;
1803
1804 priv->fifo_size = fifosize;
1805 priv->uartclk = pch_uart_get_uartclk();
1806 priv->port_type = PORT_MAX_8250 + port_type + 1;
1807 priv->port.dev = &pdev->dev;
1808 priv->port.iobase = iobase;
1809 priv->port.membase = NULL;
1810 priv->port.mapbase = mapbase;
1811 priv->port.irq = pdev->irq;
1812 priv->port.iotype = UPIO_PORT;
1813 priv->port.ops = &pch_uart_ops;
1814 priv->port.flags = UPF_BOOT_AUTOCONF;
1815 priv->port.fifosize = fifosize;
1816 priv->port.line = board->line_no;
1817 priv->trigger = PCH_UART_HAL_TRIGGER_M;
1818
1819 snprintf(priv->irq_name, IRQ_NAME_SIZE,
1820 KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
1821 priv->port.line);
1822
1823 spin_lock_init(&priv->port.lock);
1824
1825 pci_set_drvdata(pdev, priv);
1826 priv->trigger_level = 1;
1827 priv->fcr = 0;
1828
1829#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1830 pch_uart_ports[board->line_no] = priv;
1831#endif
1832 ret = uart_add_one_port(&pch_uart_driver, &priv->port);
1833 if (ret < 0)
1834 goto init_port_hal_free;
1835
1836#ifdef CONFIG_DEBUG_FS
1837 snprintf(name, sizeof(name), "uart%d_regs", board->line_no);
1838 priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO,
1839 NULL, priv, &port_regs_ops);
1840#endif
1841
1842 return priv;
1843
1844init_port_hal_free:
1845#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1846 pch_uart_ports[board->line_no] = NULL;
1847#endif
1848 free_page((unsigned long)rxbuf);
1849init_port_free_txbuf:
1850 kfree(priv);
1851init_port_alloc_err:
1852
1853 return NULL;
1854}
1855
1856static void pch_uart_exit_port(struct eg20t_port *priv)
1857{
1858
1859#ifdef CONFIG_DEBUG_FS
1860 if (priv->debugfs)
1861 debugfs_remove(priv->debugfs);
1862#endif
1863 uart_remove_one_port(&pch_uart_driver, &priv->port);
1864 free_page((unsigned long)priv->rxbuf.buf);
1865}
1866
1867static void pch_uart_pci_remove(struct pci_dev *pdev)
1868{
1869 struct eg20t_port *priv = pci_get_drvdata(pdev);
1870
1871 pci_disable_msi(pdev);
1872
1873#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1874 pch_uart_ports[priv->port.line] = NULL;
1875#endif
1876 pch_uart_exit_port(priv);
1877 pci_disable_device(pdev);
1878 kfree(priv);
1879 return;
1880}
1881#ifdef CONFIG_PM
1882static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1883{
1884 struct eg20t_port *priv = pci_get_drvdata(pdev);
1885
1886 uart_suspend_port(&pch_uart_driver, &priv->port);
1887
1888 pci_save_state(pdev);
1889 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1890 return 0;
1891}
1892
1893static int pch_uart_pci_resume(struct pci_dev *pdev)
1894{
1895 struct eg20t_port *priv = pci_get_drvdata(pdev);
1896 int ret;
1897
1898 pci_set_power_state(pdev, PCI_D0);
1899 pci_restore_state(pdev);
1900
1901 ret = pci_enable_device(pdev);
1902 if (ret) {
1903 dev_err(&pdev->dev,
1904 "%s-pci_enable_device failed(ret=%d) ", __func__, ret);
1905 return ret;
1906 }
1907
1908 uart_resume_port(&pch_uart_driver, &priv->port);
1909
1910 return 0;
1911}
1912#else
1913#define pch_uart_pci_suspend NULL
1914#define pch_uart_pci_resume NULL
1915#endif
1916
1917static const struct pci_device_id pch_uart_pci_id[] = {
1918 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
1919 .driver_data = pch_et20t_uart0},
1920 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
1921 .driver_data = pch_et20t_uart1},
1922 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
1923 .driver_data = pch_et20t_uart2},
1924 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
1925 .driver_data = pch_et20t_uart3},
1926 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
1927 .driver_data = pch_ml7213_uart0},
1928 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
1929 .driver_data = pch_ml7213_uart1},
1930 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
1931 .driver_data = pch_ml7213_uart2},
1932 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
1933 .driver_data = pch_ml7223_uart0},
1934 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
1935 .driver_data = pch_ml7223_uart1},
1936 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
1937 .driver_data = pch_ml7831_uart0},
1938 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
1939 .driver_data = pch_ml7831_uart1},
1940 {0,},
1941};
1942
1943static int pch_uart_pci_probe(struct pci_dev *pdev,
1944 const struct pci_device_id *id)
1945{
1946 int ret;
1947 struct eg20t_port *priv;
1948
1949 ret = pci_enable_device(pdev);
1950 if (ret < 0)
1951 goto probe_error;
1952
1953 priv = pch_uart_init_port(pdev, id);
1954 if (!priv) {
1955 ret = -EBUSY;
1956 goto probe_disable_device;
1957 }
1958 pci_set_drvdata(pdev, priv);
1959
1960 return ret;
1961
1962probe_disable_device:
1963 pci_disable_msi(pdev);
1964 pci_disable_device(pdev);
1965probe_error:
1966 return ret;
1967}
1968
1969static struct pci_driver pch_uart_pci_driver = {
1970 .name = "pch_uart",
1971 .id_table = pch_uart_pci_id,
1972 .probe = pch_uart_pci_probe,
1973 .remove = pch_uart_pci_remove,
1974 .suspend = pch_uart_pci_suspend,
1975 .resume = pch_uart_pci_resume,
1976};
1977
1978static int __init pch_uart_module_init(void)
1979{
1980 int ret;
1981
1982 /* register as UART driver */
1983 ret = uart_register_driver(&pch_uart_driver);
1984 if (ret < 0)
1985 return ret;
1986
1987 /* register as PCI driver */
1988 ret = pci_register_driver(&pch_uart_pci_driver);
1989 if (ret < 0)
1990 uart_unregister_driver(&pch_uart_driver);
1991
1992 return ret;
1993}
1994module_init(pch_uart_module_init);
1995
1996static void __exit pch_uart_module_exit(void)
1997{
1998 pci_unregister_driver(&pch_uart_pci_driver);
1999 uart_unregister_driver(&pch_uart_driver);
2000}
2001module_exit(pch_uart_module_exit);
2002
2003MODULE_LICENSE("GPL v2");
2004MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
2005MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
2006
2007module_param(default_baud, uint, S_IRUGO);
2008MODULE_PARM_DESC(default_baud,
2009 "Default BAUD for initial driver state and console (default 9600)");
2010module_param(user_uartclk, uint, S_IRUGO);
2011MODULE_PARM_DESC(user_uartclk,
2012 "Override UART default or board specific UART clock");